diff --git a/src/Gui/Language/FreeCAD_af.qm b/src/Gui/Language/FreeCAD_af.qm index 2c7d9b3792..b7b8f0201f 100644 Binary files a/src/Gui/Language/FreeCAD_af.qm and b/src/Gui/Language/FreeCAD_af.qm differ diff --git a/src/Gui/Language/FreeCAD_af.ts b/src/Gui/Language/FreeCAD_af.ts index 02f3a2498e..fa64fd06d1 100644 --- a/src/Gui/Language/FreeCAD_af.ts +++ b/src/Gui/Language/FreeCAD_af.ts @@ -3920,12 +3920,12 @@ Wil jy jou veranderinge stoor? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_ar.qm b/src/Gui/Language/FreeCAD_ar.qm index f365dda8d5..e351971927 100644 Binary files a/src/Gui/Language/FreeCAD_ar.qm and b/src/Gui/Language/FreeCAD_ar.qm differ diff --git a/src/Gui/Language/FreeCAD_ar.ts b/src/Gui/Language/FreeCAD_ar.ts index 0d21fbccf5..4a06971ece 100644 --- a/src/Gui/Language/FreeCAD_ar.ts +++ b/src/Gui/Language/FreeCAD_ar.ts @@ -3923,12 +3923,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_ca.qm b/src/Gui/Language/FreeCAD_ca.qm index e9683dc747..25fcce15ad 100644 Binary files a/src/Gui/Language/FreeCAD_ca.qm and b/src/Gui/Language/FreeCAD_ca.qm differ diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 5f364f4727..10da151da2 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -2776,7 +2776,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + Enregistrar els comandaments de l’interface gráfic GUI @@ -2831,7 +2831,7 @@ Specify another directory, please. Imperial Civil (ft/ft^2/ft^3) - Imperial Civil (ft/ft^2/ft^3) + Imperial Civil (ft/ft^2/ft^3) Minimum fractional inch: @@ -3914,12 +3914,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index ba47a99268..2b25ddabe6 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index b204e834aa..82a305298d 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -3914,12 +3914,12 @@ Chcete uložit provedené změny? Táhněte obrazovku dvěma prsty NEBO stiskněté pravé tlačítko myši. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Táhněte obrazovku jedním prstem NEBO stiskněté levé tlačítko myši. V Náčrtu a dalších editačních módech držte navíc Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Štípněte (položte dva prsty na obrazovku a táhněte je od sebe/k sobě) NEBO rolujte prostředním tlačítem myši NEBO použijte na klávesnici PgUp/PgDown. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index b3edc1db54..4dac8ff3d9 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index e9ac46aa09..9e22f746f4 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -1620,7 +1620,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Find... - Find... + Suchen... @@ -1631,39 +1631,39 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Find what: - Find what: + Suche nach: Look at - Look at + Anschauen von Groups - Groups + Gruppen Names - Names + Namen Values - Values + Werte Match whole string only - Match whole string only + Nur nach ganzer Zeichenkette suchen Find Next - Find Next + Nächste Fundstelle Not found - Not found + Nicht gefunden Can't find the text: %1 - Can't find the text: %1 + Kann den Text nicht finden: %1 @@ -2777,7 +2777,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Record GUI commands - Record GUI commands + GUI-Befehle aufnehmen @@ -2872,7 +2872,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Unit system: - Unit system: + Einheitensystem: @@ -3917,12 +3917,12 @@ Sollen die Änderungen gespeichert werden? Ziehen Sie mit 2 Fingern über den Bildschirm oder drücken Sie die rechte Maustaste. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Ziehen Sie mit einem Finger über den Bildschirm oder drücken Sie die linke Maustaste. Im Skizzierer und anderen Bearbeitungsmodi drücken sie zusätzlich die Alt-Taste ihrer Tastatur. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Kneifen (zwei Finger auf den Bildschirm setzen und auseinander ziehen/zusammenführen) oder Blättern mit der mittleren Maustaste oder Bild hoch/runter auf der Tastatur. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4576,11 +4576,11 @@ Möchten Sie ein anderes Verzeichnis angeben? Translation Increment: - Translation Increment: + Bewegungs Schrittweite: Rotation Increment: - Rotation Increment: + Drehung Schrittweite: diff --git a/src/Gui/Language/FreeCAD_el.qm b/src/Gui/Language/FreeCAD_el.qm index d14149308f..2dc3848b56 100644 Binary files a/src/Gui/Language/FreeCAD_el.qm and b/src/Gui/Language/FreeCAD_el.qm differ diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index ba5972fec9..8499f6c533 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -160,7 +160,7 @@ Global Sensitivity: - Global Sensitivity: + Καθολική Ευαισθησία: @@ -295,13 +295,12 @@ Press middle+left or middle+right button - Press middle+left or middle+right button + Πίεσε « το μεσαίο + το αριστερό » ή « το μεσαίο + το δεξί » πλήκτρα Scroll middle mouse button or keep middle button depressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button depressed -while doing a left or right click and move the mouse up or down + Κυλήστε το μεσαίο πλήκτρο του ποντικιού (ή κρατήστε το μεσαίο πλήκτρο πιεσμένο), κλικάρωντας, συγχρόνως, με το αριστερό ή το δεξί πλήκτρο, και σύρε το ποντίκι προς τα πάνω ή προς τα κάτω @@ -403,11 +402,11 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::AboutDialog Libraries - Libraries + Βιβλιοθήκες This software uses open source components whose copyright and other proprietary rights belong to their respective owners: - This software uses open source components whose copyright and other proprietary rights belong to their respective owners: + Αυτό το λογισμικό χρησιμοποιεί στοιχεία ανοικτού κώδικα. Τα πνευματικά δικαιώματα, καθώς και τα άλλα δικαιώματα ιδιοκτησίας, αυτών των στοιχείων, ανήκουν στους εκάστοτε ιδιοκτήτες τους: License @@ -453,7 +452,7 @@ while doing a left or right click and move the mouse up or down Current view - Current view + Τωρινή προβολή @@ -855,15 +854,15 @@ while doing a left or right click and move the mouse up or down The shortcut '%1' is defined more than once. This could result in unexpected behaviour. - The shortcut '%1' is defined more than once. This could result in unexpected behaviour. + Η συντόμευση '%1' έχει οριστεί πάνω από μια φορά. Αυτό θα μπορούσε να οδηγήσει σε απρόβλεπτη συμπεριφορά. The shortcut '%1' is already assigned to '%2'. - The shortcut '%1' is already assigned to '%2'. + Η συντόμευση '%1' έχει ήδη ανατεθεί στο '%2'. Do you want to override it? - Do you want to override it? + Θέλεις να επανογραφεί; @@ -1382,7 +1381,7 @@ while doing a left or right click and move the mouse up or down Addons... - Addons... + Πρόσθετα... @@ -1455,17 +1454,17 @@ Perhaps a file permission error? Duplicate Macro - Duplicate Macro + Διπλογραφή της Μακροεντολής Duplicate Failed - Duplicate Failed + Αποτυχία Κατά τη Διπλογραφή Failed to duplicate to '%1'. Perhaps a file permission error? - Failed to duplicate to '%1'. -Perhaps a file permission error? + Αποτυχία κατά την διπλογραφή στο '%1'. +Μήπως υπάρχει κάποιο σφάλμα στα δικαιώματα του αρχείου; @@ -1623,7 +1622,7 @@ Specify another directory, please. Find... - Find... + Εύρεση... @@ -1634,39 +1633,39 @@ Specify another directory, please. Find what: - Find what: + Εύρεση ποιου: Look at - Look at + Διερεύνηση στο Groups - Groups + Ομάδες Names - Names + Ονόματα Values - Values + Τιμές Match whole string only - Match whole string only + Ταίριασμα μόνο με ολόκληρους στίχους Find Next - Find Next + Εύρεση του Επομένου Not found - Not found + Δε βρέθηκε Can't find the text: %1 - Can't find the text: %1 + Αδυναμία εύρεσης του κειμένου: %1 @@ -2089,11 +2088,11 @@ Specify another directory, please. Show navigation cube - Show navigation cube + Προβολή του κύβου πλοήγησης Corner - Corner + Γωνία Top left @@ -2117,7 +2116,7 @@ Specify another directory, please. New Document Camera Orientation - New Document Camera Orientation + Προσανατολισμός της Κάμερας στα Νέα Έγγραφα Prevents view tilting when pinch-zooming. Affects only Gesture nav. style. Mouse tilting is not disabled by this setting. @@ -2125,15 +2124,15 @@ Specify another directory, please. Disable touchscreen tilt gesture - Disable touchscreen tilt gesture + Απενεργοποίηση της χειρονομίας πλαγιάσματος, από την οθόνη αφής Drag at cursor - Drag at cursor + Σύρσιμο στον δρομέα Marker size: - Marker size: + Μέγεθος του δείκτη: @@ -2781,7 +2780,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + Καταγραφή των εντολών της Γενικής Διάδρασης του Χρήστη @@ -2836,15 +2835,15 @@ Specify another directory, please. Imperial Civil (ft/ft^2/ft^3) - Imperial Civil (ft/ft^2/ft^3) + Βρετανικό, Πολιτικό (ft/ft^2/ft^3) Minimum fractional inch: - Minimum fractional inch: + Ελάχιστο κλάσμα των ιντσών: <html><head/><body><p>Minimum fractional inch to display.</p></body></html> - <html><head/><body><p>Minimum fractional inch to display.</p></body></html> + <html><head/><body><p>Το ελάχιστο κλάσμα, που θα προβάλλεται, όταν θα είναι σε ίντσες.</p></body></html> 1/2" @@ -2876,7 +2875,7 @@ Specify another directory, please. Unit system: - Unit system: + Σύστημα μονάδων: @@ -2927,11 +2926,11 @@ Specify another directory, please. Object being edited - Object being edited + Αντικείμενο σε επεξεργασία Active container - Active container + Ενεργό δοχείο @@ -3043,7 +3042,7 @@ Specify another directory, please. <p>Sort enabled workbenches</p> - <p>Sort enabled workbenches</p> + <p>Ταξινόμηση των ενεργοποιημένων πάγκων εργασίας</p> @@ -3472,7 +3471,7 @@ The 'Status' column shows whether the document could be recovered. Apply - Apply + Εφαρμογή Reset @@ -3500,23 +3499,23 @@ The 'Status' column shows whether the document could be recovered. Axial: - Axial: + Αξονική: Apply axial - Apply axial + Εφαρμογή της αξονικής Shift click for opposite direction - Shift click for opposite direction + Κλικ στο πλήκτρο Αλλαγής (Shift), για αντίθετη κατεύθυνση Selected points - Selected points + Επιλεγμένα σημεία Apply incremental changes - Apply incremental changes + Εφαρμογή σταδιακών αλλαγών Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. @@ -3923,12 +3922,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4582,11 +4581,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + Βήμα της Μεταμόρφωσης: Rotation Increment: - Rotation Increment: + Βήμα της Περιστροφής: @@ -4773,11 +4772,11 @@ Do you want to specify another directory? Search... - Search... + Αναζήτηση... Search for objects - Search for objects + Αναζήτηση για αντικείμενα @@ -5346,7 +5345,7 @@ Be aware the point where you click matters. Export failed - Export failed + Αποτυχία της εξαγωγής Split @@ -5362,11 +5361,11 @@ Be aware the point where you click matters. Toggle active part - Toggle active part + Εναλλαγή του ενεργού εξαρτήματος Edit text - Edit text + Επεξεργασία του κειμένου @@ -5759,7 +5758,7 @@ Be aware the point where you click matters. Activates or Deactivates the selected object's edit mode - Activates or Deactivates the selected object's edit mode + Ενεργοποιεί ή Απενεργοποιεί την κατάσταση λειτουργίας επεξεργασίας του επιλεγμένου αντικείμενου @@ -6800,7 +6799,7 @@ Be aware the point where you click matters. Creates a new view window for the active document - Creates a new view window for the active document + Δημιουργεί ένα νέο παράθυρο προβολής για το ενεργό έγγραφο @@ -6815,7 +6814,7 @@ Be aware the point where you click matters. Set to dimetric view - Set to dimetric view + Ορισμός σε διμετρική προβολή @@ -6920,7 +6919,7 @@ Be aware the point where you click matters. Set to isometric view - Set to isometric view + Ορισμός σε ισομετρική προβολή @@ -7115,7 +7114,7 @@ Be aware the point where you click matters. Set to trimetric view - Set to trimetric view + Ορισμός σε τριμετρική προβολή @@ -7242,11 +7241,11 @@ Be aware the point where you click matters. Collapse/Expand - Collapse/Expand + Σύμπτυξη/Επέκταση Expand active document and collapse all others - Expand active document and collapse all others + Επέκταση του ενεργού εγγράφου, και σύμπτυξη όλων των άλλων @@ -7257,11 +7256,11 @@ Be aware the point where you click matters. Multi Document - Multi Document + Πολύ-Έγγραφο Display all documents in the tree view - Display all documents in the tree view + Εμφάνιση όλων των εγγράφων στην προβολή δέντρου @@ -7272,11 +7271,11 @@ Be aware the point where you click matters. Single Document - Single Document + Μονό Έγγραφο Only display the active document in the tree view - Only display the active document in the tree view + Εμφάνιση μόνο του ενεργού εγγράφου, στην προβολή σαν δέντρο @@ -7287,11 +7286,11 @@ Be aware the point where you click matters. Document Tree - Document Tree + Δένδρο του Εγγράφου Set visibility of inactive documents in tree view - Set visibility of inactive documents in tree view + Καθόρισε την εμφανισιμότητα των ανενεργών εγγράφων, στην προβολή σαν δέντρο @@ -7406,19 +7405,19 @@ Be aware the point where you click matters. Std_Delete These items are linked to items selected for deletion and might break. - These items are linked to items selected for deletion and might break. + Αυτά τα αντικείμενα συνδέονται με αντικείμενα που έχουν επιλεχθεί για διαγραφή· ενδέχεται να σπάσουν. These items are selected for deletion, but are not in the active document. - These items are selected for deletion, but are not in the active document. + Αυτά τα αντικείμενα έχουν επιλεχθεί για διαγραφή, αλλά δεν βρίσκονται στο ενεργό έγγραφο. Are you sure you want to continue? - Are you sure you want to continue? + Θέλεις να συνεχίσεις, στα σίγουρα; Delete Selection Issues - Delete Selection Issues + Διαγραφή των Προβλημάτων Επιλογής @@ -7530,40 +7529,40 @@ Do you want to duplicate them, too? Set NaviCube to Isometric mode - Set NaviCube to Isometric mode + Ορισμός του Κύβου Πλοήγησης (NaviCube) σε Ισομετρική κατάσταση λειτουργίας ViewOrthographicCmd Orthographic - Orthographic + Ορθογραφική Set View to Orthographic mode - Set View to Orthographic mode + Ορισμός της Προβολής σε Ορθογραφική κατάσταση λειτουργίας ViewPerspectiveCmd Perspective - Perspective + Προοπτική Set View to Perspective mode - Set View to Perspective mode + Ορισμός της Προβολής σε Προοπτική κατάσταση λειτουργίας ViewZoomToFitCmd Zoom to fit - Zoom to fit + Εστίαση ώστε να χωρέσει Zoom so that model fills the view - Zoom so that model fills the view + Εστίαση, έτσι, ώστε το μοντέλο να γεμίζει την περιοχή προβολής diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm index 96ef6e15a9..06fc643e46 100644 Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 731199562f..eda59a6b5e 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -1621,7 +1621,7 @@ Especifique otro directorio, por favor. Find... - Find... + Encontrar... @@ -1632,39 +1632,39 @@ Especifique otro directorio, por favor. Find what: - Find what: + Buscar: Look at - Look at + Buscar en Groups - Groups + Grupos Names - Names + Nombres Values - Values + Valores Match whole string only - Match whole string only + Sólo coincidencia de palabras completas Find Next - Find Next + Encontrar siguiente Not found - Not found + No se encuentra Can't find the text: %1 - Can't find the text: %1 + No se puede encontrar el texto: %1 @@ -2099,7 +2099,7 @@ Especifique otro directorio, por favor. Top right - OPlanta derecha + Planta derecha Bottom left @@ -2778,7 +2778,7 @@ Especifique otro directorio, por favor. Record GUI commands - Record GUI commands + Grabar comandos GUI @@ -2873,7 +2873,7 @@ Especifique otro directorio, por favor. Unit system: - Unit system: + Unidad del sistema: @@ -3898,7 +3898,7 @@ Desea guardar los cambios? Top right - OPlanta derecha + Planta derecha Bottom right @@ -3920,12 +3920,12 @@ Desea guardar los cambios? Arrastre la pantalla con dos dedos o pulse el botón derecho del ratón. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Arrastre la pantalla con un dedo o pulse el botón izquierdo del ratón. En modo croquiz y otros modos de edición, mantenga pulsado también Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pellizque (ponga dos dedos en la pantalla y separelos/juntelos) o arrastre el botón central del ratón o use AvPág/RePág en teclado. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4577,11 +4577,11 @@ Desea especificar otro directorio? Translation Increment: - Translation Increment: + Incremento de traslación: Rotation Increment: - Rotation Increment: + Incremento de rotación: diff --git a/src/Gui/Language/FreeCAD_eu.qm b/src/Gui/Language/FreeCAD_eu.qm index d63de6e899..e961968e68 100644 Binary files a/src/Gui/Language/FreeCAD_eu.qm and b/src/Gui/Language/FreeCAD_eu.qm differ diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index aae1e95167..c0cf86666e 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -1245,7 +1245,7 @@ while doing a left or right click and move the mouse up or down Auto load module after start up: - Modulua automatikoki kargatu abiarazi ondoren: + Automatikoki kargatu modulua abiarazi ondoren: Language @@ -1471,7 +1471,7 @@ Fitxategi-baimenen arazo bat ote da? Gui::Dialog::DlgMacroRecord Macro recording - Makro-grabaketa + Makroen grabazioa Macro name: @@ -1621,7 +1621,7 @@ Zehaztu beste direktorio, mesedez. Find... - Find... + Bilatu... @@ -1632,39 +1632,39 @@ Zehaztu beste direktorio, mesedez. Find what: - Find what: + Aurkitu: Look at - Look at + Bilatu hemen: Groups - Groups + Taldeak Names - Names + Izenak Values - Values + Balioak Match whole string only - Match whole string only + Kate osoko bat etortzeak soilik Find Next - Find Next + Bilatu hurrengoa Not found - Not found + Ez da aurkitu Can't find the text: %1 - Can't find the text: %1 + Ezin da testua aurkitu: %1 @@ -2778,7 +2778,7 @@ Zehaztu beste direktorio, mesedez. Record GUI commands - Record GUI commands + Grabatu EI komandoak @@ -2873,7 +2873,7 @@ Zehaztu beste direktorio, mesedez. Unit system: - Unit system: + Unitate-sistema: @@ -3920,12 +3920,12 @@ Aldaketak gorde nahi dituzu? Arrastatu pantaila bi hatzekin EDO sakatu saguaren eskuineko botoia. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Arrastatu pantaila hatz batekin EDO sakatu saguaren ezkerreko botoia. Krokisgilean eta beste edizio modu batzuetan, mantendu Alt sakatuta. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Atximurkatu (ipini bi hatz pantailan eta arrastatu kanporantz edo barrurantz) EDO korritu saguaren erdiko botoia EDO PgUp/PgDown teklatuan. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4580,11 +4580,11 @@ Beste direktorio bat aukeratu nahi al duzu? Translation Increment: - Translation Increment: + Translazioaren gehikuntza: Rotation Increment: - Rotation Increment: + Biraketaren gehikuntza: diff --git a/src/Gui/Language/FreeCAD_fi.qm b/src/Gui/Language/FreeCAD_fi.qm index 5841fcab00..0fd6086bfc 100644 Binary files a/src/Gui/Language/FreeCAD_fi.qm and b/src/Gui/Language/FreeCAD_fi.qm differ diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 5d4b4d2e57..e3c7be547c 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -3920,12 +3920,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_fil.qm b/src/Gui/Language/FreeCAD_fil.qm index 80d33319d3..7d6e447859 100644 Binary files a/src/Gui/Language/FreeCAD_fil.qm and b/src/Gui/Language/FreeCAD_fil.qm differ diff --git a/src/Gui/Language/FreeCAD_fil.ts b/src/Gui/Language/FreeCAD_fil.ts index eca967c0bd..9c851f4aa2 100644 --- a/src/Gui/Language/FreeCAD_fil.ts +++ b/src/Gui/Language/FreeCAD_fil.ts @@ -3921,12 +3921,12 @@ Gusto mo bang i-save ang iyong mga pagbabago? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_fr.qm b/src/Gui/Language/FreeCAD_fr.qm index 5e10627c74..15ec5d7851 100644 Binary files a/src/Gui/Language/FreeCAD_fr.qm and b/src/Gui/Language/FreeCAD_fr.qm differ diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index c0028858bf..0e823816e5 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -1619,7 +1619,7 @@ Veuillez spécifier un autre répertoire. Find... - Find... + Rechercher… @@ -1630,39 +1630,39 @@ Veuillez spécifier un autre répertoire. Find what: - Find what: + Ce qu’il faut rechercher : Look at - Look at + Rechercher Groups - Groups + Groupes Names - Names + Noms Values - Values + Valeurs Match whole string only - Match whole string only + Ne faire correspondre que la chaîne complète Find Next - Find Next + Rechercher le suivant Not found - Not found + Introuvable Can't find the text: %1 - Can't find the text: %1 + Impossible de trouver le texte : %1 @@ -2776,7 +2776,7 @@ Veuillez spécifier un autre répertoire. Record GUI commands - Record GUI commands + Enregistrer les commande de l’interface graphique @@ -2871,7 +2871,7 @@ Veuillez spécifier un autre répertoire. Unit system: - Unit system: + Système d’unités : @@ -3918,12 +3918,12 @@ Voulez enregistrer les modifications ? Faire glisser l'écran avec deux doigts. Ou cliquer le bouton droit de la souris. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Faire glisser l'écran avec un doigt. Ou cliquer le bouton gauche de la souris. Dans l'atelier Sketcher et les autres modes d'édition, maintenez en plus la touche Alt enfoncée. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pincer (mettre deux doigts sur l'écran, les rapprocher ou les écarter). Ou faire tourner la molette de la souris. Ou presser PgUp/PgDown sur le clavier. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4572,11 +4572,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + Incrément de translation : Rotation Increment: - Rotation Increment: + Incrément de rotation : diff --git a/src/Gui/Language/FreeCAD_gl.qm b/src/Gui/Language/FreeCAD_gl.qm index d9f7e2d96c..b2817961b9 100644 Binary files a/src/Gui/Language/FreeCAD_gl.qm and b/src/Gui/Language/FreeCAD_gl.qm differ diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index 49038f1807..bafde026ae 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -1622,7 +1622,7 @@ Por favor, especifique outro directorio. Find... - Find... + Buscar... @@ -1633,39 +1633,39 @@ Por favor, especifique outro directorio. Find what: - Find what: + Atopar o que: Look at - Look at + Procurar Groups - Groups + Grupos Names - Names + Nomes Values - Values + Valores Match whole string only - Match whole string only + Coincidir a cadea completa Find Next - Find Next + Procurar Seguinte Not found - Not found + Non atopado Can't find the text: %1 - Can't find the text: %1 + Non atopado o texto: %1 @@ -2779,7 +2779,7 @@ Por favor, especifique outro directorio. Record GUI commands - Record GUI commands + Gravar comandos GUI @@ -2874,7 +2874,7 @@ Por favor, especifique outro directorio. Unit system: - Unit system: + Sistema de unidades: @@ -3921,12 +3921,12 @@ Quere gardar os cambios? Arrastrar con dous dedos OU prema o botón dereito do rato. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Arrastrar cun dedo OU prema o botón esquerdo do rato. No Esbozador mais noutros modos de edición, manteña premido Alt ao mesmo tempo. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Belisque (poña dous dedos na pantalla e arrástreos xuntándoos ou afastándoos un do outro) OU role a roda do rato OU use Avpáx/Repáx no teclado. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4583,11 +4583,11 @@ Quere especificar outro directorio? Translation Increment: - Translation Increment: + Incremento de tradución: Rotation Increment: - Rotation Increment: + Incremento de rotación: diff --git a/src/Gui/Language/FreeCAD_hr.qm b/src/Gui/Language/FreeCAD_hr.qm index 0c08ca831b..ccdabffd9f 100644 Binary files a/src/Gui/Language/FreeCAD_hr.qm and b/src/Gui/Language/FreeCAD_hr.qm differ diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index d32c36f572..50a9af4abd 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -1618,7 +1618,7 @@ Specify another directory, please. Find... - Find... + Pronađi... @@ -1629,39 +1629,39 @@ Specify another directory, please. Find what: - Find what: + Pronađi što: Look at - Look at + Pogledaj na Groups - Groups + Grupe Names - Names + Imena Values - Values + Vrijednosti Match whole string only - Match whole string only + Uskladi samo čitav red znakova Find Next - Find Next + Pronađi sljedeće Not found - Not found + Nije pronađeno Can't find the text: %1 - Can't find the text: %1 + Ne mogu pronaći tekst: %1 @@ -2774,7 +2774,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + Snimi GUI naredbe @@ -2869,7 +2869,7 @@ Specify another directory, please. Unit system: - Unit system: + Sustav jedinica: @@ -3914,12 +3914,12 @@ Do you want to save your changes? Povucite zaslon s dva prsta. Ili pritisnite desnu tipku miša. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Povucite zaslon s jednim prstom. Ili pritisnite lijevu tipku miša. U crtaču i drugim načinima uređivanja, držite tipku Alt za dodavanje. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Prstohvat (Stavite dva prsta na zaslon i povucite ih zasebno/skupa) Ili pomaknite srednji miš gumb. Ili PgUp/PgDown na tipkovnici. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4573,11 +4573,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + Korak pomjeranja: Rotation Increment: - Rotation Increment: + Korak rotacije: diff --git a/src/Gui/Language/FreeCAD_hu.qm b/src/Gui/Language/FreeCAD_hu.qm index 0e47f710f0..99833fd7b3 100644 Binary files a/src/Gui/Language/FreeCAD_hu.qm and b/src/Gui/Language/FreeCAD_hu.qm differ diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 62226cd457..a20984fa71 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -1620,7 +1620,7 @@ Kérem válasszon másik könyvtárat. Find... - Find... + Keresés... @@ -1631,39 +1631,39 @@ Kérem válasszon másik könyvtárat. Find what: - Find what: + Keres valamit: Look at - Look at + Megvizsgál Groups - Groups + Csoportok Names - Names + Nevek Values - Values + Értékek Match whole string only - Match whole string only + Csak teljes karakterláncra egyezés Find Next - Find Next + Következő keresése Not found - Not found + Nem talált Can't find the text: %1 - Can't find the text: %1 + Nem található szöveg: %1 @@ -2777,7 +2777,7 @@ Kérem válasszon másik könyvtárat. Record GUI commands - Record GUI commands + GUI parancsok rögzítése @@ -2872,7 +2872,7 @@ Kérem válasszon másik könyvtárat. Unit system: - Unit system: + Mértékegységrendszer: @@ -3919,12 +3919,12 @@ El akarja menteni a változásokat? Húzza a képernyőn két ujjal VAGY nyomja meg az egér jobb oldali gombját. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Húzza a képernyőn egy ujjal VAGY nyomja meg a bal egérgombot. Vázlatkészítőben és más szerkesztési módokban ezen kívül tartsa lenyomva az Alt billentyűt is. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Csípje (helyezze két ujját a képernyőn, és húzza őket egymáshoz vagy el egymástól) VAGY görgesse a középső egér gombot VAGY a billentyűzet PgUp/PgDown gombjával. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4578,11 +4578,11 @@ Meg szeretne adni egy másik könyvtárat? Translation Increment: - Translation Increment: + Eltolás növelése: Rotation Increment: - Rotation Increment: + Elforgatás növelése: diff --git a/src/Gui/Language/FreeCAD_id.qm b/src/Gui/Language/FreeCAD_id.qm index 5db6c3e5ad..0b911b7172 100644 Binary files a/src/Gui/Language/FreeCAD_id.qm and b/src/Gui/Language/FreeCAD_id.qm differ diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index c112c06475..43e0397eb1 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -160,7 +160,7 @@ Global Sensitivity: - Global Sensitivity: + Global Sensitivity: @@ -3912,12 +3912,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_it.qm b/src/Gui/Language/FreeCAD_it.qm index cd2db728c1..ab1f787fc9 100644 Binary files a/src/Gui/Language/FreeCAD_it.qm and b/src/Gui/Language/FreeCAD_it.qm differ diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index e0b53f0b66..bba7b33288 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -60,7 +60,7 @@ App::Property The displayed size of the origin - La dimensione visualizzata dell'originale + La dimensione visualizzata dell'origine Visual size of the feature @@ -68,7 +68,7 @@ <empty> - <empty> + <vuoto> Angle @@ -95,7 +95,7 @@ Test console output - Verificare l'output di console + Prova l'output della console @@ -148,7 +148,7 @@ Default - Normale + Predefinito Enable @@ -235,7 +235,7 @@ Gui::AlignmentView Movable object - Oggetto mobile + Oggetto movibile Fixed object @@ -250,7 +250,7 @@ %1 help files not found (%2). You might need to install the %1 documentation package. - %1 i file della guida non trovato (%2). Potrebbe essere necessario installare il pacchetto %1 della documentazione. + %1 file della guida non trovati (%2). Potrebbe essere necessario installare il pacchetto %1 della documentazione. Unable to launch Qt Assistant (%1) @@ -261,7 +261,7 @@ Gui::AutoSaver Please wait until the AutoRecovery file has been saved... - Si prega di attendere fino a che il salvataggio del file di autorecupero sia terminato... + Si prega di attendere durante il salvataggio del file di recupero automatico... @@ -272,7 +272,7 @@ Press SHIFT and middle mouse button - Premere Maiusc e il pulsante centrale del mouse + Premi MAIUSC e il pulsante centrale del mouse Press middle mouse button @@ -387,7 +387,7 @@ while doing a left or right click and move the mouse up or down Credits - Crediti + Ringraziamenti FreeCAD would be nowhere without their efforts: @@ -428,7 +428,7 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog Camera settings - Impostazioni fotocamera + Impostazioni telecamera Orientation @@ -1052,7 +1052,7 @@ while doing a left or right click and move the mouse up or down Plot mode: - Modo di stampa: + Modalità di stampa: @@ -1083,7 +1083,7 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::DlgDisplayPropertiesImp Default - Normale + Predefinito Aluminium @@ -1304,7 +1304,7 @@ while doing a left or right click and move the mouse up or down Extra large (%1px) - Extra grande (%1px) + Grandissimo (%1px) Custom (%1px) @@ -1381,7 +1381,7 @@ while doing a left or right click and move the mouse up or down Addons... - Addons... + Estensioni... @@ -1422,7 +1422,7 @@ Il file esiste già. Creation of file '%1' failed. - Creazione del file '%1' non riuscita. + Creazione del file '%1' fallita. Read-only @@ -1430,25 +1430,27 @@ Il file esiste già. Renaming Macro File - Rinomina il File di Macro + Rinomina file Macro Enter new name: - Immettere il nuovo nome: + Inserire un nuovo nome: '%1' already exists. - '%1' esiste già. + '%1' +esiste già. Rename Failed - Rinomina non riuscita + Impossibile rinominare Failed to rename to '%1'. Perhaps a file permission error? - Impossibile rinominare in '%1'. Forse un errore di autorizzazione del file? + Impossibile rinominare in '%1'. +Forse un errore di autorizzazione del file? Duplicate Macro @@ -1524,7 +1526,7 @@ Forse un errore di autorizzazione del file? You have no write permission for the directory. Please, choose another one. - Non si dispone dell'autorizzazione di scrittura nella cartella. Sceglierne un'altra. + Non hai i permessi di scrittura per la cartella. Scegline un'altra. @@ -1620,7 +1622,7 @@ Specificare un'altra cartella. Find... - Find... + Trova... @@ -1631,39 +1633,39 @@ Specificare un'altra cartella. Find what: - Find what: + Trova ciò che: Look at - Look at + Controlla Groups - Groups + Gruppi Names - Names + Nomi Values - Values + Valori Match whole string only - Match whole string only + Controlla solo la stringa intera Find Next - Find Next + Trova successivo Not found - Not found + Non trovato Can't find the text: %1 - Can't find the text: %1 + Impossibile trovare il testo: %1 @@ -1686,7 +1688,7 @@ Specificare un'altra cartella. User parameter - Parametri utente + Parametro utente Invalid input @@ -1698,7 +1700,7 @@ Specificare un'altra cartella. System parameter - Parametro di sistema + Parametri di sistema @@ -1865,7 +1867,7 @@ Specificare un'altra cartella. Please select an object from the list - Seleziona un oggetto dell'elenco + Selezionare prima un oggetto dell'elenco Search @@ -1990,7 +1992,7 @@ Specificare un'altra cartella. Show coordinate system in the corner - Mostra le coordinate di sistema nell'angolo + Mostra il sistema di coordinate all'angolo Show counter of frames per second @@ -2030,7 +2032,7 @@ Specificare un'altra cartella. Orbit style - Stile Orbita + Stile orbita Turntable @@ -2050,7 +2052,7 @@ Specificare un'altra cartella. Zoom step - Passo di zoom + Fattore di zoom Anti-Aliasing @@ -2130,7 +2132,7 @@ Specificare un'altra cartella. Marker size: - Dimensioni del marcatore: + Grandezza segnaposto: @@ -2141,7 +2143,7 @@ Specificare un'altra cartella. Open a new viewer or restart %1 to apply anti-aliasing changes. - Aprire un nuovo visualizzatore o riavviare %1 per applicare le modifiche di anti-alias. + Aprire un nuovo visualizzatore o riavviare %1 per applicare le modifiche all' Anti-Aliasing. 5px @@ -2546,7 +2548,7 @@ Specificare un'altra cartella. Back&ground: - Sfo&ndo + Sfo&ndo: Current @@ -2777,7 +2779,7 @@ Specificare un'altra cartella. Record GUI commands - Record GUI commands + Registra i comandi GUI @@ -2820,7 +2822,7 @@ Specificare un'altra cartella. Building Euro (cm/m²/m³) - Sistema europeo (cm//m²/m³) + Sistema europeo (cm/m²/m³) Building US (ft-in/sqft/cuft) @@ -2832,7 +2834,7 @@ Specificare un'altra cartella. Imperial Civil (ft/ft^2/ft^3) - Imperiale civile (ft/ft ^2/ft ^3) + Imperiale civile (ft/ft^2/ft ^3) Minimum fractional inch: @@ -2872,7 +2874,7 @@ Specificare un'altra cartella. Unit system: - Unit system: + Sistema di unità: @@ -2983,15 +2985,15 @@ Specificare un'altra cartella. Gui::Dialog::DlgWorkbenches Workbenches - Ambienti + Ambienti di lavoro Enabled workbenches - Ambienti abilitati + Ambienti di lavoro abilitati Disabled workbenches - Ambienti disabilitati + Ambienti di lavoro disabilitati Move down @@ -3019,7 +3021,7 @@ Specificare un'altra cartella. Sort enabled workbenches - Ordina gli ambienti abilitati + Ordina gli ambienti di lavoro abilitati Move up @@ -3035,11 +3037,11 @@ Specificare un'altra cartella. Add all to enabled workbenches - Aggiunge tutti gli ambienti negli abilitati + Aggiunge tutti gli ambienti di lavoro agli abilitati <p>Sort enabled workbenches</p> - <p>Ordina gli ambienti abilitati</p> + <p>Ordina gli ambienti di lavoro abilitati</p> @@ -3247,14 +3249,14 @@ The 'Status' column shows whether the document could be recovered. Removing a folder only takes effect after an application restart. - Rimuovere una cartella ha effetto solo dopo il riavvio di un'applicazione. + La rimozione di una cartella ha effetto solo dopo il riavvio dell'applicazione. Gui::Dialog::InputVector Input vector - Immetti vettore + Vettore di input Vector @@ -3681,7 +3683,7 @@ The 'Status' column shows whether the document could be recovered. Redirect Python output - Reindirizza l'output Python + Reindirizza l'output di Python Redirect Python errors @@ -3715,7 +3717,7 @@ The 'Status' column shows whether the document could be recovered. Clears the search field - Vuota il campo di ricerca + Svuota il campo di ricerca Select only @@ -3759,7 +3761,7 @@ The 'Status' column shows whether the document could be recovered. Mark to recompute - Segna da ricalcolare + Segna come da ricalcolare Mark this object to be recomputed @@ -3823,7 +3825,7 @@ Si desidera salvare le modifiche? untitled[*] - Senza titolo[*] + senza titolo[*] - Editor @@ -3917,12 +3919,12 @@ Si desidera salvare le modifiche? Trascinare lo schermo con due dita, oppure premere il tasto destro del mouse. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Trascinare lo schermo con un dito, oppure premere il tasto sinistro del mouse. In Sketcher e altre modalità di modifica, tenere anche premuto Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pizzicare (mettere due dita sullo schermo e trascinarli, avvicinandoli o allontanandoli). Oppure muovere la rotellina del mouse. Oppure usare i tasti Pgsu e Pggiù. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4458,7 +4460,7 @@ Vuoi uscire senza salvare i tuoi dati? Press SHIFT and middle mouse button - Premere Maiusc e il pulsante centrale del mouse + Premi MAIUSC e il pulsante centrale del mouse Scroll middle mouse button @@ -4575,18 +4577,18 @@ Vuoi specificare un'altra cartella? Translation Increment: - Translation Increment: + Incremento di traslazione: Rotation Increment: - Rotation Increment: + Incremento di rotazione: Gui::TaskView::TaskAppearance Plot mode: - Modo di stampa: + Modalità di stampa: Point size: @@ -4635,7 +4637,7 @@ Vuoi specificare un'altra cartella? edit selection - Modifica selezione + modifica selezione @@ -4754,7 +4756,7 @@ Vuoi specificare un'altra cartella? Mark to recompute - Segna da ricalcolare + Segna come da ricalcolare Mark this object to be recomputed @@ -4796,7 +4798,7 @@ Vuoi specificare un'altra cartella? Gui::WorkbenchGroup Select the '%1' workbench - Seleziona l'ambiente '%1' + Seleziona l'ambiente '%1' @@ -5116,7 +5118,7 @@ Vuoi continuare? Choose an item: - scegli un elemento: + Scegli un elemento: Rename group @@ -5124,7 +5126,7 @@ Vuoi continuare? The group '%1' cannot be renamed. - Il gruppo '%1' non può essere rinominato + Il gruppo '%1' non può essere rinominato. Existing group @@ -5804,7 +5806,7 @@ Prestare attenzione al punto dove si fa clic. Recompute feature or document - Ricalcola la feature o il documento + Ricalcola la Funzione o il documento @@ -7654,7 +7656,7 @@ p, li { white-space: pre-wrap; } Default - Normale + Predefinito Windows XP diff --git a/src/Gui/Language/FreeCAD_ja.qm b/src/Gui/Language/FreeCAD_ja.qm index 33bf4f8449..639d0c5ef6 100644 Binary files a/src/Gui/Language/FreeCAD_ja.qm and b/src/Gui/Language/FreeCAD_ja.qm differ diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index c934dd549e..66d22f250f 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -1618,7 +1618,7 @@ Specify another directory, please. Find... - Find... + 検索... @@ -1629,39 +1629,39 @@ Specify another directory, please. Find what: - Find what: + 検索するもの Look at - Look at + 見る Groups - Groups + グループ Names - Names + 名前 Values - Values + 値 Match whole string only - Match whole string only + 文字列全体にのみ一致 Find Next - Find Next + 次を検索 Not found - Not found + 見つからない Can't find the text: %1 - Can't find the text: %1 + 次の文字は見つかりませんでした：%1 @@ -2775,7 +2775,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + GUI コマンドの記録 @@ -2871,7 +2871,7 @@ Specify another directory, please. Unit system: - Unit system: + 単位システム @@ -3917,12 +3917,12 @@ Do you want to save your changes? 二本指ですスクリーンをドラッグするか、右マウスボタンを押します。 - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - 画面を1本の指でドラッグするか、マウス左ボタンを押します。スケッチャーなどの編集モードではさらにALTキーを押しっぱなしにします。 + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - ピンチ（スクリーンに二本の指を置き、互いに離すようにドラッグ）、または中マウスボタンをスクロール、またはキーボードのPgUp/PgDownキーを押す。 + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4572,11 +4572,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + 平行移動の増分: Rotation Increment: - Rotation Increment: + 回転の増分: diff --git a/src/Gui/Language/FreeCAD_kab.qm b/src/Gui/Language/FreeCAD_kab.qm index 8361f5a292..3c1a35a82b 100644 Binary files a/src/Gui/Language/FreeCAD_kab.qm and b/src/Gui/Language/FreeCAD_kab.qm differ diff --git a/src/Gui/Language/FreeCAD_kab.ts b/src/Gui/Language/FreeCAD_kab.ts index 7ceccf5bc4..0a0da8e10d 100644 --- a/src/Gui/Language/FreeCAD_kab.ts +++ b/src/Gui/Language/FreeCAD_kab.ts @@ -3921,12 +3921,12 @@ Voulez enregistrer les modifications ? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_ko.qm b/src/Gui/Language/FreeCAD_ko.qm index 8e7ef8b71a..b0d59c13db 100644 Binary files a/src/Gui/Language/FreeCAD_ko.qm and b/src/Gui/Language/FreeCAD_ko.qm differ diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 25acc5b661..47d702d3ab 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -3919,12 +3919,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_lt.qm b/src/Gui/Language/FreeCAD_lt.qm index f6fb040b53..8da7d46044 100644 Binary files a/src/Gui/Language/FreeCAD_lt.qm and b/src/Gui/Language/FreeCAD_lt.qm differ diff --git a/src/Gui/Language/FreeCAD_lt.ts b/src/Gui/Language/FreeCAD_lt.ts index 6e6edf631b..ba2a2e0f21 100644 --- a/src/Gui/Language/FreeCAD_lt.ts +++ b/src/Gui/Language/FreeCAD_lt.ts @@ -3918,12 +3918,12 @@ Ar norite įrašyti keitimus? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_nl.qm b/src/Gui/Language/FreeCAD_nl.qm index a3c11de992..20264e29ad 100644 Binary files a/src/Gui/Language/FreeCAD_nl.qm and b/src/Gui/Language/FreeCAD_nl.qm differ diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 4bdd50c05f..b2934ed35b 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -3915,12 +3915,12 @@ Wilt u uw wijzigingen opslaan? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_no.qm b/src/Gui/Language/FreeCAD_no.qm index a1a8d5dcd1..6fc8f41ae9 100644 Binary files a/src/Gui/Language/FreeCAD_no.qm and b/src/Gui/Language/FreeCAD_no.qm differ diff --git a/src/Gui/Language/FreeCAD_no.ts b/src/Gui/Language/FreeCAD_no.ts index 3837190007..ffeb2a896f 100644 --- a/src/Gui/Language/FreeCAD_no.ts +++ b/src/Gui/Language/FreeCAD_no.ts @@ -3919,12 +3919,12 @@ Vil du lagre endringene? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index 466ba92aac..79998280d4 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 099694e865..096f2afe9b 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -1620,7 +1620,7 @@ Specify another directory, please. Find... - Find... + Znajdź... @@ -1631,7 +1631,7 @@ Specify another directory, please. Find what: - Find what: + Znajdź co: Look at @@ -1639,15 +1639,15 @@ Specify another directory, please. Groups - Groups + Grupy Names - Names + Nazwy Values - Values + Wartości Match whole string only @@ -1655,11 +1655,11 @@ Specify another directory, please. Find Next - Find Next + Znajdź następny Not found - Not found + Nie znaleziono Can't find the text: %1 @@ -2776,7 +2776,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + Nagrywanie poleceń GUI @@ -2835,7 +2835,7 @@ Specify another directory, please. Minimum fractional inch: - Minimum fractional inch: + Minimalny ułamek cala: <html><head/><body><p>Minimum fractional inch to display.</p></body></html> @@ -2871,7 +2871,7 @@ Specify another directory, please. Unit system: - Unit system: + Układ jednostek: @@ -2914,7 +2914,7 @@ Specify another directory, please. Sets the area of confusion for picking elements in 3D view. Larger value makes it easier to pick stuff, but will make some small features impossible to select. - Sets the area of confusion for picking elements in 3D view. Larger value makes it easier to pick stuff, but will make some small features impossible to select. + Ustawia teren obszaru na zbieranie elementów w widoku 3D. Większa wartość ułatwia wybieranie rzeczy, ale uniemożliwi wybór niektórych małych funkcji. Tree View @@ -3038,7 +3038,7 @@ Specify another directory, please. <p>Sort enabled workbenches</p> - <p>Sort enabled workbenches</p> + <p>Sortuj włączone środowiska</p> @@ -3132,7 +3132,7 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. When deleting all transient directories you won't be able to recover any files afterwards. - When deleting all transient directories you won't be able to recover any files afterwards. + Po usunięciu wybranych katalogów przejściowych nie będziesz w stanie odzyskać żadnych plików. @@ -3915,12 +3915,12 @@ Do you want to save your changes? Przeciągnij po ekranie dwoma palcami lub kliknij prawym przyciskiem myszy. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Przeciągnij po ekranie jednym palcem lub naciśnij lewy przycisk myszy. W innych trybach edycji jak np. Sketcher dodatkowo przytrzymaj naciśnięty klawisz Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Uszczypnięcie (umieść dwa palce na ekranie i przeciągnij je od lub do siebie na wzajem) lub przewijanie środkowym przyciskiem myszy, bądź przyciskami PgUp/PgDown na klawiaturze. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_pt-BR.qm b/src/Gui/Language/FreeCAD_pt-BR.qm index 82e5753cf2..fd634cc5a3 100644 Binary files a/src/Gui/Language/FreeCAD_pt-BR.qm and b/src/Gui/Language/FreeCAD_pt-BR.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 89bb2cf3b5..1d53901343 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -1619,7 +1619,7 @@ Por favor especifique outro diretório. Find... - Find... + Procurar... @@ -1630,39 +1630,39 @@ Por favor especifique outro diretório. Find what: - Find what: + O que encontrar: Look at - Look at + Procurar em Groups - Groups + Grupos Names - Names + Nomes Values - Values + Values Match whole string only - Match whole string only + Encontrar toda a string somente Find Next - Find Next + Localizar seguinte Not found - Not found + Não encontrado Can't find the text: %1 - Can't find the text: %1 + Não foi possível encontrar o texto: %1 @@ -2775,7 +2775,7 @@ Por favor especifique outro diretório. Record GUI commands - Record GUI commands + Gravar comandos na GUI @@ -2870,7 +2870,7 @@ Por favor especifique outro diretório. Unit system: - Unit system: + Sistema de unidades: @@ -3914,12 +3914,12 @@ Deseja salvar as alterações? Arraste com dois dedos no monitor, ou pressione o botão direito do rato. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Arraste a tela com um dedo ou pressione o botão esquerdo do rato. Em outros modos de edição ou no Sketcher, pressione também Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinça (Coloque dois dedos na tela e arraste-os afastando/aproximando um do outro). Ou o botão de rolagem do meio do mouse. Ou PgUp/PgDown no teclado. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4568,11 +4568,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + Incremento de translação: Rotation Increment: - Rotation Increment: + Incremento de rotação: diff --git a/src/Gui/Language/FreeCAD_pt-PT.qm b/src/Gui/Language/FreeCAD_pt-PT.qm index 894a5804bd..d0f59f3bce 100644 Binary files a/src/Gui/Language/FreeCAD_pt-PT.qm and b/src/Gui/Language/FreeCAD_pt-PT.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index ac0d26b8d7..69b1eba9c5 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -3915,12 +3915,12 @@ Deseja guardar as suas alterações? Arraste com dois dedos no monitor, ou pressione o botão direito do rato. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Arraste a tela com um dedo ou pressione o botão esquerdo do rato. Em outros modos de edição ou no Sketcher, pressione também Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (coloque dois dedos na tela e afaste-os ou aproxime-os) role o botão do meio do rato OU PgUp/PgDown no teclado. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index 87d9f9898a..8188b3abdb 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index a36fd8747c..fc35c34f9b 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -3915,12 +3915,12 @@ Doriți să salvați modificările? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_ru.qm b/src/Gui/Language/FreeCAD_ru.qm index 9fca8e7d93..6d9d8206e6 100644 Binary files a/src/Gui/Language/FreeCAD_ru.qm and b/src/Gui/Language/FreeCAD_ru.qm differ diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 1d545b5861..f765210742 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -1621,7 +1621,7 @@ Specify another directory, please. Find... - Find... + Найти... @@ -1632,39 +1632,39 @@ Specify another directory, please. Find what: - Find what: + Найти: Look at - Look at + Показать Groups - Groups + Группы Names - Names + Названия Values - Values + Значения Match whole string only - Match whole string only + Только строка целиком Find Next - Find Next + Искать далее Not found - Not found + Не найдено Can't find the text: %1 - Can't find the text: %1 + Не удалось найти текст: %1 @@ -2779,7 +2779,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + Записать команды интерфейса @@ -2874,7 +2874,7 @@ Specify another directory, please. Unit system: - Unit system: + Система измерения: @@ -3920,12 +3920,12 @@ Do you want to save your changes? Перетаскивайте экран двумя пальцами ИЛИ нажатием правой кнопки мыши. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Перетаскивайте экран одним пальцем ИЛИ нажмите левую кнопку мыши. В верстаке Эскиз и других режимах редактирования, дополнительно удерживайте клавишу Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Щепок (поместите два пальца на экран и двигайте их друг от друга или друг к другу) ИЛИ вращайте колесо мыши ИЛИ используйте кнопки PgUp/PgDown на клавиатуре. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4577,11 +4577,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + Приращение перемещения: Rotation Increment: - Rotation Increment: + Приращение поворота: diff --git a/src/Gui/Language/FreeCAD_sk.qm b/src/Gui/Language/FreeCAD_sk.qm index ae96fa38de..67a3a339a2 100644 Binary files a/src/Gui/Language/FreeCAD_sk.qm and b/src/Gui/Language/FreeCAD_sk.qm differ diff --git a/src/Gui/Language/FreeCAD_sk.ts b/src/Gui/Language/FreeCAD_sk.ts index 41bfb07b11..84fe3873c3 100644 --- a/src/Gui/Language/FreeCAD_sk.ts +++ b/src/Gui/Language/FreeCAD_sk.ts @@ -3922,12 +3922,12 @@ Chcete uložiť zmeny? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm index c4f4caff32..e1cc66c317 100644 Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index a73bdce18d..002ff7b5ae 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -1622,7 +1622,7 @@ Navedite drugo mapo. Find... - Find... + Poišči ... @@ -1633,39 +1633,39 @@ Navedite drugo mapo. Find what: - Find what: + Najdi, kar: Look at - Look at + Glej Groups - Groups + Skupine Names - Names + Imena Values - Values + Vrednosti Match whole string only - Match whole string only + Le ujemanje celotnega niza Find Next - Find Next + Najdi naslednje Not found - Not found + Ni mogoče najti Can't find the text: %1 - Can't find the text: %1 + Ni mogoče najti besedila: %1 @@ -2779,7 +2779,7 @@ Navedite drugo mapo. Record GUI commands - Record GUI commands + Beleži ukaze gr. up. vmesnika @@ -2874,7 +2874,7 @@ Navedite drugo mapo. Unit system: - Unit system: + Merski sistem: @@ -3919,12 +3919,12 @@ Ali želite shraniti spremembe? Povlecite po zaslonu z dvema prstoma ali kliknite z desnim miškinim gumbom. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Povlecite po zaslonu z enim prstom ali kliknite z levim miškinim gumbom. V očrtovalniku in drugih načinih urejanja pridržite še tipko Alt. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Uščipnite (na zaslonu dva prsta povlecite skupaj ali narazen), zavrtite miškino kolesce ali na tipkovnici pritisnite Stran ↑/Stran ↓. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4579,11 +4579,11 @@ Ali želite navesti drugo mapo? Translation Increment: - Translation Increment: + Korak vzporednega premikanja: Rotation Increment: - Rotation Increment: + Korak sukanja: diff --git a/src/Gui/Language/FreeCAD_sr.qm b/src/Gui/Language/FreeCAD_sr.qm index 64b86c9dc2..6353f4f2fc 100644 Binary files a/src/Gui/Language/FreeCAD_sr.qm and b/src/Gui/Language/FreeCAD_sr.qm differ diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index 45b5453453..db34c99290 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -3919,12 +3919,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index bf4ccf0084..e825b78d20 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 9248ed4ab3..b9678fd16d 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -3922,12 +3922,12 @@ Vill du spara ändringarna? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_tr.qm b/src/Gui/Language/FreeCAD_tr.qm index 9572378e91..d70f628ddd 100644 Binary files a/src/Gui/Language/FreeCAD_tr.qm and b/src/Gui/Language/FreeCAD_tr.qm differ diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index ee0a06c0b8..f442eaa0fe 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -1622,7 +1622,7 @@ Lütfen başka bir dizin belirtin. Find... - Find... + Bul... @@ -1633,39 +1633,39 @@ Lütfen başka bir dizin belirtin. Find what: - Find what: + Şunu Bul: Look at - Look at + Bak Groups - Groups + Gruplar Names - Names + İsimler Values - Values + Değerler Match whole string only - Match whole string only + Yalnızca tüm dizeyi eşleştir Find Next - Find Next + Sonrakini Bul Not found - Not found + Bulunamadı Can't find the text: %1 - Can't find the text: %1 + Bu Metin bulunamıyor: %1 @@ -2780,7 +2780,7 @@ Kenar yumuşatma değişiklikleri uygulamak için yeni bir görüntüleyici aç Record GUI commands - Record GUI commands + GUI arayüz komutlarını kaydet @@ -2875,7 +2875,7 @@ Kenar yumuşatma değişiklikleri uygulamak için yeni bir görüntüleyici aç Unit system: - Unit system: + Ölçü Birimi sistemi: @@ -3921,12 +3921,12 @@ Do you want to save your changes? Ekranı iki parmağınızla sürükleyin VEYA farenin sağ düğmesine basın. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Ekranı bir parmağınızla sürükleyin VEYA farenin sol düğmesine basın. Sketcher ve diğer düzenleme modlarında, ilave olarak Alt tuşuna basılı tutun. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Sıkıştırın (iki parmağınızı ekrana yerleştirin ve birbirinden uzağa veya birbirlerine doğru sürükleyin) VEYA fare tekerini kaydırın VEYA Klavyede PgUp / PgDown kullanın. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4580,11 +4580,11 @@ Başka bir dizin belirlemek ister misiniz? Translation Increment: - Translation Increment: + Çeviri artışı: Rotation Increment: - Rotation Increment: + Dönme Artışı: diff --git a/src/Gui/Language/FreeCAD_uk.qm b/src/Gui/Language/FreeCAD_uk.qm index 2250c034f0..a0f3b27d7f 100644 Binary files a/src/Gui/Language/FreeCAD_uk.qm and b/src/Gui/Language/FreeCAD_uk.qm differ diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 574317a831..05f344ef89 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -1620,7 +1620,7 @@ Specify another directory, please. Find... - Find... + Знайти... @@ -1631,7 +1631,7 @@ Specify another directory, please. Find what: - Find what: + Що шукати: Look at @@ -1639,15 +1639,15 @@ Specify another directory, please. Groups - Groups + Групи Names - Names + Назви Values - Values + Значення Match whole string only @@ -1655,15 +1655,15 @@ Specify another directory, please. Find Next - Find Next + Шукати далі Not found - Not found + Не знайдено Can't find the text: %1 - Can't find the text: %1 + Не вдається знайти текст: %1 @@ -2836,11 +2836,11 @@ Specify another directory, please. Minimum fractional inch: - Minimum fractional inch: + Мінімальна частина дюйма: <html><head/><body><p>Minimum fractional inch to display.</p></body></html> - <html><head/><body><p>Minimum fractional inch to display.</p></body></html> + <html><head/><body><p>Мінімальна частина дюйма для відображення</p></body></html> 1/2" @@ -2872,7 +2872,7 @@ Specify another directory, please. Unit system: - Unit system: + Система одиниць вимірювання: @@ -3508,7 +3508,7 @@ The 'Status' column shows whether the document could be recovered. Selected points - Selected points + Обрані точки Apply incremental changes @@ -3912,19 +3912,19 @@ Do you want to save your changes? Gui::GestureNavigationStyle Tap OR click left mouse button. - Tap OR click left mouse button. + Торкніться або клацніть лівою кнопкою миші. Drag screen with two fingers OR press right mouse button. Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4206,7 +4206,7 @@ How do you want to proceed? Gui::MayaGestureNavigationStyle Tap OR click left mouse button. - Tap OR click left mouse button. + Торкніться або клацніть лівою кнопкою миші. Drag screen with two fingers OR press ALT + middle mouse button. @@ -7400,7 +7400,7 @@ Be aware the point where you click matters. These items are selected for deletion, but are not in the active document. - These items are selected for deletion, but are not in the active document. + Ці елементи обрані для видалення, але вони знаходяться не в активному документі. Are you sure you want to continue? @@ -7519,7 +7519,7 @@ Do you want to duplicate them, too? Set NaviCube to Isometric mode - Set NaviCube to Isometric mode + Встановити NaviCube в ізометричний режим перегляду diff --git a/src/Gui/Language/FreeCAD_val-ES.qm b/src/Gui/Language/FreeCAD_val-ES.qm index f3e3930f43..aaac864ad4 100644 Binary files a/src/Gui/Language/FreeCAD_val-ES.qm and b/src/Gui/Language/FreeCAD_val-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index de52af83a4..089e5a7ebb 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -160,7 +160,7 @@ Global Sensitivity: - Global Sensitivity: + Sensibilitat global: @@ -295,13 +295,12 @@ Press middle+left or middle+right button - Press middle+left or middle+right button + Premeu el botó del mig+botó esquerre o el botó del mig+botó dret Scroll middle mouse button or keep middle button depressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button depressed -while doing a left or right click and move the mouse up or down + Feu lliscar la roda del ratolí o manteniu premuda la roda mentre feu clic dret o esquerre i moveu el ratolí cap amunt o cap avall @@ -403,11 +402,11 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::AboutDialog Libraries - Libraries + Biblioteques This software uses open source components whose copyright and other proprietary rights belong to their respective owners: - This software uses open source components whose copyright and other proprietary rights belong to their respective owners: + Aquest programari utilitza components de codi obert, el copyright i altres drets de propietat dels quals pertanyen als seus respectius propietaris: License @@ -429,7 +428,7 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog Camera settings - Camera settings + Paràmetres de la càmera Orientation @@ -437,23 +436,23 @@ while doing a left or right click and move the mouse up or down Q0 - Q0 + Q0 Q1 - Q1 + Q1 Q2 - Q2 + Q2 Q3 - Q3 + Q3 Current view - Current view + Vista actual @@ -855,15 +854,15 @@ while doing a left or right click and move the mouse up or down The shortcut '%1' is defined more than once. This could result in unexpected behaviour. - The shortcut '%1' is defined more than once. This could result in unexpected behaviour. + La drecera «%1» s'ha definit més d'una vegada. Açò pot provocar un comportament inesperat. The shortcut '%1' is already assigned to '%2'. - The shortcut '%1' is already assigned to '%2'. + La drecera «%1» ja s'ha assignat a «%2». Do you want to override it? - Do you want to override it? + Voleu sobreescriure'l? @@ -1378,11 +1377,11 @@ while doing a left or right click and move the mouse up or down Duplicate - Duplicate + Duplica Addons... - Addons... + Complements... @@ -1454,17 +1453,17 @@ Pot ser un problema de permisos d'arxiu? Duplicate Macro - Duplicate Macro + Duplica la macro Duplicate Failed - Duplicate Failed + Ha fallat el duplicat Failed to duplicate to '%1'. Perhaps a file permission error? - Failed to duplicate to '%1'. -Perhaps a file permission error? + No s'ha pogut duplicar «%1». +Potser per un error de permís de fitxer? @@ -1620,7 +1619,7 @@ Specify another directory, please. Find... - Find... + Busca... @@ -1631,39 +1630,39 @@ Specify another directory, please. Find what: - Find what: + Busca: Look at - Look at + Busca en Groups - Groups + Grups Names - Names + Noms Values - Values + Valors Match whole string only - Match whole string only + Fes coincidir sols les cadenes completes Find Next - Find Next + Troba el següent Not found - Not found + No s'ha trobat Can't find the text: %1 - Can't find the text: %1 + No es pot trobar el text: %1 @@ -2086,11 +2085,11 @@ Specify another directory, please. Show navigation cube - Show navigation cube + Mostra el cub de navegació Corner - Corner + Cantó Top left @@ -2110,27 +2109,27 @@ Specify another directory, please. Use OpenGL Vertex Buffer Object - Use OpenGL Vertex Buffer Object + Utilitzeu l'objecte OpenGL Vertex Buffer New Document Camera Orientation - New Document Camera Orientation + Orientació de la càmera del nou document Prevents view tilting when pinch-zooming. Affects only Gesture nav. style. Mouse tilting is not disabled by this setting. - Prevents view tilting when pinch-zooming. Affects only Gesture nav. style. Mouse tilting is not disabled by this setting. + Evita la inclinació de la vista quan s'està fent zoom amb els dits. Sols afecta l'estil de Navegació amb gestos. Aquesta opció no desactiva la inclinació del ratolí. Disable touchscreen tilt gesture - Disable touchscreen tilt gesture + Desactiva el gest d'inclinació de la pantalla tàctil Drag at cursor - Drag at cursor + Arrossegueu el cursor Marker size: - Marker size: + Mida del marcador: @@ -2145,27 +2144,27 @@ Specify another directory, please. 5px - 5px + 5px 7px - 7px + 7px 9px - 9px + 9px 11px - 11px + 11px 13px - 13px + 13px 15px - 15px + 15px Isometric @@ -2776,7 +2775,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + Gravació de les ordres de la GUI @@ -2831,47 +2830,47 @@ Specify another directory, please. Imperial Civil (ft/ft^2/ft^3) - Imperial Civil (ft/ft^2/ft^3) + Imperial Civil (ft/ft^2/ft^3) Minimum fractional inch: - Minimum fractional inch: + Polzada fraccionària mínima: <html><head/><body><p>Minimum fractional inch to display.</p></body></html> - <html><head/><body><p>Minimum fractional inch to display.</p></body></html> + <html><head/><body><p>Polzada fraccionària mínima que cal mostrar.</p></body></html> 1/2" - 1/2" + 1/2" 1/4" - 1/4" + 1/4" 1/8" - 1/8" + 1/8" 1/16" - 1/16" + 1/16" 1/32" - 1/32" + 1/32" 1/64" - 1/64" + 1/64" 1/128" - 1/128" + 1/128" Unit system: - Unit system: + Sistema de la unitat: @@ -2914,19 +2913,19 @@ Specify another directory, please. Sets the area of confusion for picking elements in 3D view. Larger value makes it easier to pick stuff, but will make some small features impossible to select. - Sets the area of confusion for picking elements in 3D view. Larger value makes it easier to pick stuff, but will make some small features impossible to select. + Estableix l'àrea de confusió per a triar elements en la vista 3D. Un valor elevat facilita la selecció, però fa que siga impossible seleccionar algunes característiques menors. Tree View - Tree View + Vista d'arbre Object being edited - Object being edited + Objecte que s'està editant Active container - Active container + Contenidor actiu @@ -3038,7 +3037,7 @@ Specify another directory, please. <p>Sort enabled workbenches</p> - <p>Sort enabled workbenches</p> + <p>Ordena els bancs de treball habilitats</p> @@ -3131,7 +3130,7 @@ La columna 'Estat? mostra si el document es pot recuperar. When deleting all transient directories you won't be able to recover any files afterwards. - When deleting all transient directories you won't be able to recover any files afterwards. + Si suprimiu tots els directoris transitoris després no podreu recuperar cap fitxer. @@ -3466,7 +3465,7 @@ La columna 'Estat? mostra si el document es pot recuperar. Apply - Apply + Aplica Reset @@ -3494,27 +3493,27 @@ La columna 'Estat? mostra si el document es pot recuperar. Axial: - Axial: + Axial: Apply axial - Apply axial + Aplica axial Shift click for opposite direction - Shift click for opposite direction + Majúscules clic per a la direcció oposada Selected points - Selected points + Punts seleccionats Apply incremental changes - Apply incremental changes + Aplica els canvis incrementals Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. + Seleccioneu 1, 2 o 3 punts abans de fer clic en aquest botó. Un punt pot estar en un vèrtex, cara o aresta. Si esteu en una cara o aresta, el punt utilitzat serà el punt en la cara o aresta en la posició del ratolí. Si 1 punt és seleccionat serà utilitzat com a centre de rotació. Si se seleccionen 2 punts, el punt mig entre ells serà el centre de rotació i un nou eix personalitzat es crearà, si és necessari. Si se seleccionen 3 punts, el primer punt es converteix en el centre de rotació i es troba en el vector que és normal al pla definit per 3 punts. Alguns detalls de distància i angle es proporcionen en la visualització d'informe, que pot ser útil per a alinear objectes. Per a la vostra comoditat, quan feu Majúscules + clic s'utilitza la distància adequada o l'angle es copia al porta-retalls. @@ -3605,7 +3604,7 @@ La columna 'Estat? mostra si el document es pot recuperar. Transform - Transform + Transforma @@ -3909,19 +3908,19 @@ Do you want to save your changes? Gui::GestureNavigationStyle Tap OR click left mouse button. - Tap OR click left mouse button. + Toqueu o feu clic amb el botó esquerre del ratolí. Drag screen with two fingers OR press right mouse button. - Drag screen with two fingers OR press right mouse button. + Arrossegueu la pantalla amb dos dits o premeu el botó dret del ratolí. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4203,26 +4202,26 @@ How do you want to proceed? Gui::MayaGestureNavigationStyle Tap OR click left mouse button. - Tap OR click left mouse button. + Toqueu o feu clic amb el botó esquerre del ratolí. Drag screen with two fingers OR press ALT + middle mouse button. - Drag screen with two fingers OR press ALT + middle mouse button. + Arrossegueu la pantalla amb dos dits o premeu ALT i el botó central del ratolí. Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Arrossegueu la pantalla amb un dit o premeu Alt i el botó esquerre del ratolí. En l'entorn d'esbós i altres modes d'edició, manteniu, a més, la tecla Alt. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard. + Pinceu (poseu dos dits en la pantalla i separeu-los o ajunteu-los); o feu girar la rodeta del ratolí; o premeu Alt i el botó dret del ratolí; o utilitzeu les tecles Re Pàg/Av Pàg del teclat. Gui::NetworkRetriever Download started... - Download started... + Ha començat la baixada... @@ -4567,11 +4566,11 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + Increment de translació: Rotation Increment: - Rotation Increment: + Increment de rotació: @@ -4758,11 +4757,11 @@ Do you want to specify another directory? Search... - Search... + Busca... Search for objects - Search for objects + Busca objectes @@ -4853,55 +4852,55 @@ Do you want to specify another directory? 0.1 mm - 0.1 mm + 0,1 mm 0.5 mm - 0.5 mm + 0,5mm 1 mm - 1 mm + 1 mm 2 mm - 2 mm + 2 mm 5 mm - 5 mm + 5 mm 10 mm - 10 mm + 10 mm 20 mm - 20 mm + 20 mm 50 mm - 50 mm + 50 mm 100 mm - 100 mm + 100 mm 200 mm - 200 mm + 200 mm 500 mm - 500 mm + 500 mm 1 m - 1 m + 1 m 2 m - 2 m + 2 m 5 m @@ -5272,7 +5271,7 @@ Be aware the point where you click matters. Transform - Transform + Transforma Do you want to close this dialog? @@ -5324,7 +5323,7 @@ Be aware the point where you click matters. Export failed - Export failed + Exportació fallida Split @@ -5340,11 +5339,11 @@ Be aware the point where you click matters. Toggle active part - Toggle active part + Commuta la part activa Edit text - Edit text + Edita el text @@ -5737,7 +5736,7 @@ Be aware the point where you click matters. Activates or Deactivates the selected object's edit mode - Activates or Deactivates the selected object's edit mode + Activa o desactiva el mode d'edició de l'objecte seleccionat @@ -6684,7 +6683,7 @@ Be aware the point where you click matters. Transform - Transform + Transforma Transform the selected object in the 3d view @@ -6778,7 +6777,7 @@ Be aware the point where you click matters. Creates a new view window for the active document - Creates a new view window for the active document + Crea una nova finestra de visualització per al document actiu @@ -6793,7 +6792,7 @@ Be aware the point where you click matters. Set to dimetric view - Set to dimetric view + Estableix la vista dimètrica @@ -6898,7 +6897,7 @@ Be aware the point where you click matters. Set to isometric view - Set to isometric view + Estableix la vista isomètrica @@ -7093,7 +7092,7 @@ Be aware the point where you click matters. Set to trimetric view - Set to trimetric view + Estableix la vista trimètrica @@ -7220,11 +7219,11 @@ Be aware the point where you click matters. Collapse/Expand - Collapse/Expand + Contrau/Expandeix Expand active document and collapse all others - Expand active document and collapse all others + Expandeix el document actiu i contrau tota la resta @@ -7235,11 +7234,11 @@ Be aware the point where you click matters. Multi Document - Multi Document + Multi-Document Display all documents in the tree view - Display all documents in the tree view + Mostra tots els documents en la vista d'arbre @@ -7250,11 +7249,11 @@ Be aware the point where you click matters. Single Document - Single Document + Document únic Only display the active document in the tree view - Only display the active document in the tree view + Mostra només el document actiu a la vista d'arbre @@ -7265,11 +7264,11 @@ Be aware the point where you click matters. Document Tree - Document Tree + Arbre del document Set visibility of inactive documents in tree view - Set visibility of inactive documents in tree view + Estableix la visibilitat dels documents inactius en la vista d'arbre @@ -7384,19 +7383,19 @@ Be aware the point where you click matters. Std_Delete These items are linked to items selected for deletion and might break. - These items are linked to items selected for deletion and might break. + Aquests elements estan vinculats a elements seleccionats per a la supressió i podrien trencar-se. These items are selected for deletion, but are not in the active document. - These items are selected for deletion, but are not in the active document. + Aquests elements estan seleccionats per a suprimir-los, però no estan en el document actiu. Are you sure you want to continue? - Are you sure you want to continue? + Esteu segur que voleu continuar? Delete Selection Issues - Delete Selection Issues + Suprimeix problemes de selecció @@ -7507,40 +7506,40 @@ Do you want to duplicate them, too? Set NaviCube to Isometric mode - Set NaviCube to Isometric mode + Estableix NaviCube en el mode isomètric ViewOrthographicCmd Orthographic - Orthographic + Ortogonal Set View to Orthographic mode - Set View to Orthographic mode + Estableix la visualització al mode ortogonal ViewPerspectiveCmd Perspective - Perspective + Perspectiva Set View to Perspective mode - Set View to Perspective mode + Defineix la visualització en mode de perspectiva ViewZoomToFitCmd Zoom to fit - Zoom to fit + Zoom per a encabir Zoom so that model fills the view - Zoom so that model fills the view + Zoom perquè el model òmpliga la visualització diff --git a/src/Gui/Language/FreeCAD_vi.qm b/src/Gui/Language/FreeCAD_vi.qm index 3e268408af..98e2709f8c 100644 Binary files a/src/Gui/Language/FreeCAD_vi.qm and b/src/Gui/Language/FreeCAD_vi.qm differ diff --git a/src/Gui/Language/FreeCAD_vi.ts b/src/Gui/Language/FreeCAD_vi.ts index 57ce308a18..53d6608b5e 100644 --- a/src/Gui/Language/FreeCAD_vi.ts +++ b/src/Gui/Language/FreeCAD_vi.ts @@ -3922,12 +3922,12 @@ Bạn có muốn lưu các thay đổi của bạn? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 2611ec95ee..04171534e3 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index a60f6d7c4a..7575ac9897 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -160,7 +160,7 @@ Global Sensitivity: - Global Sensitivity: + 全局敏感度: @@ -295,13 +295,12 @@ Press middle+left or middle+right button - Press middle+left or middle+right button + 按中键+左键或中键+右键 Scroll middle mouse button or keep middle button depressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button depressed -while doing a left or right click and move the mouse up or down + 滚动鼠标中键或在点击鼠标左键或右键时按住鼠标中键并移动鼠标 @@ -403,11 +402,11 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::AboutDialog Libraries - Libraries + 库 This software uses open source components whose copyright and other proprietary rights belong to their respective owners: - This software uses open source components whose copyright and other proprietary rights belong to their respective owners: + 该软件使用开放源码组件, 其版权和其他专有权利属于各自的所有者: License @@ -429,7 +428,7 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog Camera settings - Camera settings + 相机设置 Orientation @@ -437,23 +436,23 @@ while doing a left or right click and move the mouse up or down Q0 - Q0 + Q0 Q1 - Q1 + Q1 Q2 - Q2 + Q2 Q3 - Q3 + Q3 Current view - Current view + 当前视图 @@ -855,15 +854,15 @@ while doing a left or right click and move the mouse up or down The shortcut '%1' is defined more than once. This could result in unexpected behaviour. - The shortcut '%1' is defined more than once. This could result in unexpected behaviour. + 快捷方式'%1'不唯一. 这将导致不可预料的结果. The shortcut '%1' is already assigned to '%2'. - The shortcut '%1' is already assigned to '%2'. + 快捷方式 '%1''已经分配给 '%2'. Do you want to override it? - Do you want to override it? + 您想要覆盖吗？ @@ -1378,11 +1377,11 @@ while doing a left or right click and move the mouse up or down Duplicate - Duplicate + 复制 Addons... - Addons... + 插件... @@ -1454,17 +1453,17 @@ Perhaps a file permission error? Duplicate Macro - Duplicate Macro + 复制宏 Duplicate Failed - Duplicate Failed + 复制失败 Failed to duplicate to '%1'. Perhaps a file permission error? - Failed to duplicate to '%1'. -Perhaps a file permission error? + 无法复制到"%1"。 +可能是文件权限错误？ @@ -1620,7 +1619,7 @@ Specify another directory, please. Find... - Find... + 查找... @@ -1631,7 +1630,7 @@ Specify another directory, please. Find what: - Find what: + 查找： Look at @@ -1643,27 +1642,27 @@ Specify another directory, please. Names - Names + 名称 Values - Values + 值 Match whole string only - Match whole string only + 只匹配整个字符串 Find Next - Find Next + 查找下一个 Not found - Not found + 未找到 Can't find the text: %1 - Can't find the text: %1 + 找不到文本: %1 @@ -2086,11 +2085,11 @@ Specify another directory, please. Show navigation cube - Show navigation cube + 显示导航立方体 Corner - Corner + 边角 Top left @@ -2110,11 +2109,11 @@ Specify another directory, please. Use OpenGL Vertex Buffer Object - Use OpenGL Vertex Buffer Object + 使用 OpenGL 顶点缓存对象 New Document Camera Orientation - New Document Camera Orientation + 新建文档相机方向 Prevents view tilting when pinch-zooming. Affects only Gesture nav. style. Mouse tilting is not disabled by this setting. @@ -2122,15 +2121,15 @@ Specify another directory, please. Disable touchscreen tilt gesture - Disable touchscreen tilt gesture + 禁用触摸屏倾斜手势 Drag at cursor - Drag at cursor + 在光标处拖动 Marker size: - Marker size: + 标记大小： @@ -2145,27 +2144,27 @@ Specify another directory, please. 5px - 5px + 5px 7px - 7px + 7px 9px - 9px + 9px 11px - 11px + 11px 13px - 13px + 13px 15px - 15px + 15px Isometric @@ -2776,7 +2775,7 @@ Specify another directory, please. Record GUI commands - Record GUI commands + 录制图形用户界面命令 @@ -2831,7 +2830,7 @@ Specify another directory, please. Imperial Civil (ft/ft^2/ft^3) - Imperial Civil (ft/ft^2/ft^3) + 英制(ft/ft^2/ft^3) Minimum fractional inch: @@ -2843,15 +2842,15 @@ Specify another directory, please. 1/2" - 1/2" + 1/2" 1/4" - 1/4" + 1/4" 1/8" - 1/8" + 1/8" 1/16" @@ -3916,12 +3915,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -7275,7 +7274,7 @@ Be aware the point where you click matters. Set visibility of inactive documents in tree view - Set visibility of inactive documents in tree view + 设定树状视图中的非活动文档的可见性 @@ -7390,7 +7389,7 @@ Be aware the point where you click matters. Std_Delete These items are linked to items selected for deletion and might break. - These items are linked to items selected for deletion and might break. + 这些项目与选择要删除的项目链接，并可能中断。 These items are selected for deletion, but are not in the active document. @@ -7398,7 +7397,7 @@ Be aware the point where you click matters. Are you sure you want to continue? - Are you sure you want to continue? + 确定要继续吗? Delete Selection Issues @@ -7513,40 +7512,40 @@ Do you want to duplicate them, too? Set NaviCube to Isometric mode - Set NaviCube to Isometric mode + 将导航立方体设置为等距模式 ViewOrthographicCmd Orthographic - Orthographic + 正交投影 Set View to Orthographic mode - Set View to Orthographic mode + 将视图设置为正交模式 ViewPerspectiveCmd Perspective - Perspective + 透视 Set View to Perspective mode - Set View to Perspective mode + 将视图设置为透视模式 ViewZoomToFitCmd Zoom to fit - Zoom to fit + 缩放到适合窗口大小 Zoom so that model fills the view - Zoom so that model fills the view + 缩放以使模型填充视图 diff --git a/src/Gui/Language/FreeCAD_zh-TW.qm b/src/Gui/Language/FreeCAD_zh-TW.qm index 3238edc069..a0cedd28ed 100644 Binary files a/src/Gui/Language/FreeCAD_zh-TW.qm and b/src/Gui/Language/FreeCAD_zh-TW.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index c6cb9acc47..3514aef72c 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -3916,12 +3916,12 @@ Do you want to save your changes? Drag screen with two fingers OR press right mouse button. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. diff --git a/src/Mod/AddonManager/Resources/AddonManager.qrc b/src/Mod/AddonManager/Resources/AddonManager.qrc index 9ac7191968..eda1a0387d 100644 --- a/src/Mod/AddonManager/Resources/AddonManager.qrc +++ b/src/Mod/AddonManager/Resources/AddonManager.qrc @@ -29,5 +29,42 @@ icons/Timber_workbench_icon.svg icons/YAML_workbench_icon.svg icons/BIMBots_workbench_icon.svg + translations/AddonManager_af.qm + translations/AddonManager_ar.qm + translations/AddonManager_ca.qm + translations/AddonManager_cs.qm + translations/AddonManager_de.qm + translations/AddonManager_el.qm + translations/AddonManager_es-ES.qm + translations/AddonManager_eu.qm + translations/AddonManager_fi.qm + translations/AddonManager_fil.qm + translations/AddonManager_fr.qm + translations/AddonManager_gl.qm + translations/AddonManager_hr.qm + translations/AddonManager_hu.qm + translations/AddonManager_id.qm + translations/AddonManager_it.qm + translations/AddonManager_ja.qm + translations/AddonManager_kab.qm + translations/AddonManager_ko.qm + translations/AddonManager_lt.qm + translations/AddonManager_nl.qm + translations/AddonManager_no.qm + translations/AddonManager_pl.qm + translations/AddonManager_pt-BR.qm + translations/AddonManager_pt-PT.qm + translations/AddonManager_ro.qm + translations/AddonManager_ru.qm + translations/AddonManager_sk.qm + translations/AddonManager_sl.qm + translations/AddonManager_sr.qm + translations/AddonManager_sv-SE.qm + translations/AddonManager_tr.qm + translations/AddonManager_uk.qm + translations/AddonManager_val-ES.qm + translations/AddonManager_vi.qm + translations/AddonManager_zh-CN.qm + translations/AddonManager_zh-TW.qm diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm new file mode 100644 index 0000000000..e4961298d6 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts new file mode 100644 index 0000000000..6f0445d8e6 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Pas toe + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Makros + + + + Execute + Voer uit + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm new file mode 100644 index 0000000000..4eb0e7087c Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts new file mode 100644 index 0000000000..8d00efe483 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Apply + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Macros + + + + Execute + تنفيد + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm new file mode 100644 index 0000000000..445066e90e Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts new file mode 100644 index 0000000000..73740b88dd --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Gestor d'extensions + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Cal que reinicis FreeCAD per què els canvis s'efectuin. Premi Acceptar per reinciciar-lo ara, o bé, Cancel·lar per fer-ho més tard. + + + + Checking for updates... + Buscant actualitzacions... + + + + Apply + Aplicar + + + + update(s) + actualització(ns) + + + + No update available + No hi ha actualizacions disponibles + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + No es pot instal·lar + + + + Addon successfully removed. Please restart FreeCAD + Extensió eliminada exitosament. Si-us-plau, reinicieu FreeCAD + + + + Unable to remove this addon + No es pot esborrar l'extensió + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + No es pot descarregar la llista d'extensions. + + + + Workbenches list was updated. + Banc de treball actualitzat. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Bancs de treball + + + + Macros + Macros + + + + Execute + Executa + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm new file mode 100644 index 0000000000..8cd93b66b7 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts new file mode 100644 index 0000000000..1f9de607a4 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Použít + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Pracovní stoly + + + + Macros + Makra + + + + Execute + Spustit + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm new file mode 100644 index 0000000000..f067f9a90e Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts new file mode 100644 index 0000000000..c402d231a3 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Der Code dieses Makros kann nicht abgerufen werden. + + + + Unable to retrieve a description for this macro. + Eine Beschreibung für dieses Makro kann nicht abgerufen werden. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + Die Addons, die hier installiert werden können, sind nicht offiziell Teil von FreeCAD und werden nicht vom FreeCAD Team überprüft. Stellen Sie sicher, dass Sie wissen, was Sie installieren! + + + + Addon manager + Addon-Manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Sie müssen FreeCAD neu starten, um die Änderungen anzuwenden. Drücken Sie Ok, um FreeCAD jetzt neu zu starten, oder Abbrechen, um später neu zu starten. + + + + Checking for updates... + Nach Updates suchen... + + + + Apply + Übernehmen + + + + update(s) + update(s) + + + + No update available + Kein Update verfügbar + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Das Makro wurde erfolgreich installiert. Es ist nun im Macros-Dialog verfügbar. + + + + Unable to install + Kann nicht installiert werden + + + + Addon successfully removed. Please restart FreeCAD + Das Addon wurde erfolgreich entfernt. Bitte starten Sie FreeCAD neu + + + + Unable to remove this addon + Dieses Addon konnte nicht entfernt werden + + + + Macro successfully removed. + Das Makro wurde erfolgreich entfernt. + + + + Macro could not be removed. + Das Makro konnte nicht entfernt werden. + + + + Unable to download addon list. + Die Addon-Liste konnte nicht geladen werden. + + + + Workbenches list was updated. + Die Liste der Arbeitsumgebungen wurde aktualisiert. + + + + Outdated GitPython detected, consider upgrading with pip. + Es wurde eine veraltete GitPython-Version erkannt, erwäge das Upgrade mit Pip. + + + + List of macros successfully retrieved. + Die Makro-Liste wurde erfolgreich abgerufen. + + + + Retrieving description... + Beschreibung wird abgerufen... + + + + Retrieving info from + Informationen werden abgerufen von + + + + An update is available for this addon. + Für dieses Addon ist ein Update verfügbar. + + + + This addon is already installed. + Dieses Addon ist bereits installiert. + + + + This add-on is marked as obsolete + Dieses Add-on ist als veraltet markiert + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + Dies bedeutet normalerweise, dass es nicht mehr gewartet wird, und einige erweiterte Add-on in dieser Liste bietet die gleiche Funktionalität. + + + + Retrieving info from git + Informationen werden von Git abgerufen + + + + Retrieving info from wiki + Informationen werden aus den Wiki abgerufen + + + + GitPython not found. Using standard download instead. + GitPython wurde nicht gefunden. Stattdessen wird der Standarddownload verwendet. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Ihre Version von Python scheint ZIP-Dateien nicht zu unterstützen. Aktion kann nicht fortgesetzt werden. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench erfolgreich installiert. Bitte starten Sie FreeCAD neu, um die Änderungen anzuwenden. + + + + Missing workbench + Fehlender Arbeitsbereich + + + + Missing python module + Fehlendes Python-Modul + + + + Missing optional python module (doesn't prevent installing) + Fehlendes optionales Python-Modul (verhindert nicht die Installation) + + + + Some errors were found that prevent to install this workbench + Es wurden einige Fehler gefunden, die die Installation dieses Arbeitsbereiches verhindern + + + + Please install the missing components first. + Bitte installieren Sie zuerst die fehlenden Komponenten. + + + + Error: Unable to download + Fehler: Download nicht möglich + + + + Successfully installed + Installation erfolgreich + + + + GitPython not installed! Cannot retrieve macros from git + GitPython is nicht installiert! Makros können nicht von git abgerufen werden + + + + Unable to clean macro code + Makro-Code kann nicht bereinigt werden + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons-Manager + + + + Workbenches + Arbeitsbereiche + + + + Macros + Makros + + + + Execute + Ausführen + + + + Downloading info... + Info wird heruntergeladen... + + + + Update all + Alle aktualisieren + + + + Executes the selected macro, if installed + Führt das ausgewählte Makro aus, wenn es installiert ist + + + + Uninstalls a selected macro or workbench + Deinstalliert ein ausgewähltes Makro oder Arbeitsbereich + + + + Installs or updates the selected macro or workbench + Installiert oder aktualisiert das ausgewählte Makro oder den gewählten Arbeitsbereich + + + + Download and apply all available updates + Alle verfügbaren Updates herunterladen und anwenden + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon-Manager + + + + Manage external workbenches and macros + Externe Arbeitsbereiche und Makros verwalten + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm new file mode 100644 index 0000000000..813c77ad72 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts new file mode 100644 index 0000000000..56fb2b681c --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Εφαρμογή + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Πάγκοι Εργασίας + + + + Macros + Μακροεντολές + + + + Execute + Εκτέλεση + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm new file mode 100644 index 0000000000..71b58ad337 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts new file mode 100644 index 0000000000..d808e5470d --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + No se puede obtener el código de esta macro. + + + + Unable to retrieve a description for this macro. + No se puede recuperar una descripción para esta macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + Los addons que se pueden instalar aquí no son oficialmente parte de FreeCAD, y no son revisados por el equipo de FreeCAD. ¡Asegúrese de que sabe lo que está instalando! + + + + Addon manager + Administrador de Addon + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Debe reiniciar FreeCAD para que los cambios surtan efecto. Pulse Ok para reiniciar FreeCAD ahora, o Cancelar para reiniciar más tarde. + + + + Checking for updates... + Buscando actualizaciones... + + + + Apply + Aplicar + + + + update(s) + actualización(es) + + + + No update available + Ninguna actualización disponible + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro instalado correctamente. La macro está disponible ahora en el diálogo Macros. + + + + Unable to install + No se puede instalar + + + + Addon successfully removed. Please restart FreeCAD + Addon correctamente eliminado. Reinicia FreeCAD + + + + Unable to remove this addon + No se puede eliminar este addon + + + + Macro successfully removed. + Macro eliminado correctamente. + + + + Macro could not be removed. + No se pudo quitar el Macro. + + + + Unable to download addon list. + No se puede descargar la lista de Addons. + + + + Workbenches list was updated. + Lista de entornos de trabajo actualizada. + + + + Outdated GitPython detected, consider upgrading with pip. + Detectado GitPython caducado, considere actualizar con pip. + + + + List of macros successfully retrieved. + La lista de macros fue recuperada con éxito. + + + + Retrieving description... + Recuperando la descripción... + + + + Retrieving info from + Recuperando información de + + + + An update is available for this addon. + Una actualización está disponible para este addon. + + + + This addon is already installed. + Este addon ya está instalado. + + + + This add-on is marked as obsolete + Este addon está marcado como obsoleto + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + Esto generalmente significa que ya no es mantenido, y algunos addons más avanzados en esta lista proveen la misma funcionalidad. + + + + Retrieving info from git + Recuperando información de git + + + + Retrieving info from wiki + Recuperando información de wiki + + + + GitPython not found. Using standard download instead. + GitPython no encontrado. Utilizando descarga estándar en su lugar. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Su versión de python no parece ser compatible con archivos ZIP. No es posible proceder. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + El entorno de trabajo se ha instalado correctamente. Reinicie FreeCAD para aplicar los cambios. + + + + Missing workbench + Falta el entorno de trabajo + + + + Missing python module + Falta módulo python + + + + Missing optional python module (doesn't prevent installing) + Falta módulo opcional de python (no impide la instalación) + + + + Some errors were found that prevent to install this workbench + Se han encontrado algunos errores que impiden instalar este entorno de trabajo + + + + Please install the missing components first. + Por favor, instale los componentes que faltan primero. + + + + Error: Unable to download + Error: No se puede descargar + + + + Successfully installed + Se ha instalado correctamente + + + + GitPython not installed! Cannot retrieve macros from git + ¡GitPython no instalado! No se pueden recuperar macros desde git + + + + Unable to clean macro code + No se puede limpiar el código macro + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Administrador de Addons + + + + Workbenches + Espacios de trabajo + + + + Macros + Macros + + + + Execute + Ejecutar + + + + Downloading info... + Descargando información... + + + + Update all + Actualizar todo + + + + Executes the selected macro, if installed + Ejecuta la macro seleccionada, si está instalada + + + + Uninstalls a selected macro or workbench + Desinstala una macro o entorno de trabajo seleccionado + + + + Installs or updates the selected macro or workbench + Instala o actualiza la macro o el entorno de trabajo seleccionado + + + + Download and apply all available updates + Descargar y aplicar todas las actualizaciones disponibles + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Administrador de Addon + + + + Manage external workbenches and macros + Administrar entornos de trabajo y macros externas + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm new file mode 100644 index 0000000000..7a2adc3811 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts new file mode 100644 index 0000000000..82c0050e92 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Ezin izan da makro honen kodea eskuratu. + + + + Unable to retrieve a description for this macro. + Ezin izan da makro honen deskribapen bat eskuratu. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + Hemen instalatu daitezkeen makroak ez dira FreeCADen makro ofizialak eta FreeCAD taldeak ez ditu gainbegiratzen. Ziurtatu badakizula zer ari zaren instalatzen! + + + + Addon manager + Gehigarrien kudeatzailea + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + FreeCAD berrabiarazi behar da aldaketak indarrean sartu daitezen. Sakatu 'Ados' FreeCAD orain berrabiarazteko edo 'Utzi' geroago berrabiarazteko. + + + + Checking for updates... + Eguneraketak bilatzen... + + + + Apply + Aplikatu + + + + update(s) + eguneraketa + + + + No update available + Ez dago eguneraketarik eskuragarri + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Makroa ongi instalatu da. Orain makroa erabilgarri dago 'Makroak' elkarrizketa-koadroan. + + + + Unable to install + Ezin izan da instalatu + + + + Addon successfully removed. Please restart FreeCAD + Gehigarria ongi kendu da. Berrabiarazi FreeCAD + + + + Unable to remove this addon + Ezin izan da gehigarri hau kendu + + + + Macro successfully removed. + Makroa ongi kendu da. + + + + Macro could not be removed. + Makroa ezin izan da kendu. + + + + Unable to download addon list. + Ezin izan da gehigarrien zerrenda deskargatu. + + + + Workbenches list was updated. + Lan-mahaien zerrenda eguneratu da. + + + + Outdated GitPython detected, consider upgrading with pip. + GitPython zaharkitua detektatu da, eguneratu ezazu pip bidez. + + + + List of macros successfully retrieved. + Makroen zerrenda ongi atzitu da. + + + + Retrieving description... + Deskribapena atzitzen... + + + + Retrieving info from + Informazioa berreskuratzen hemendik + + + + An update is available for this addon. + Eguneraketa bat eskuragarri dago gehigarri honetarako. + + + + This addon is already installed. + Gehigarri hau instalatuta dago. + + + + This add-on is marked as obsolete + Gehigarri hau zaharkituta dago + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + Horrek esan nahi du ez dela mantentzen eta zerrenda honetako gehigarri aurreratuagoren batek funtzionaltasun bera eskaintzen duela. + + + + Retrieving info from git + Informazioa atzitzen git biltegitik + + + + Retrieving info from wiki + Informazioa atzitzen wikitik + + + + GitPython not found. Using standard download instead. + GitPython ez da aurkitu. Deskarga estandarra erabiltzen. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Badirudi zure Python bertsioak ez duela ZIP fitxategirik onartzen. Ezin da jarraitu. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Lan-mahaia ongi instalatu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. + + + + Missing workbench + Lan-mahaia falta da + + + + Missing python module + Python modulua falta da + + + + Missing optional python module (doesn't prevent installing) + Aukerako Python modulua falta da (ez du instalazioa eragozten) + + + + Some errors were found that prevent to install this workbench + Lan-mahai hau instalatzea eragozten duten zenbait errore aurkitu dira + + + + Please install the missing components first. + Instalatu falta diren osagaiak. + + + + Error: Unable to download + Errorea: Ezin da deskargatu + + + + Successfully installed + Ongi instalatu da + + + + GitPython not installed! Cannot retrieve macros from git + GitPython ez dago instalatuta! Ezin dira makroak atzitu git biltegitik + + + + Unable to clean macro code + Ezin izan da makroaren kodea garbitu + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Gehigarrien kudeatzailea + + + + Workbenches + Lan-mahaiak + + + + Macros + Makroak + + + + Execute + Exekutatu + + + + Downloading info... + Informazioa deskargatzen... + + + + Update all + Eguneratu dena + + + + Executes the selected macro, if installed + Hautatutako makroa exekutatzen du, instalatuta badago + + + + Uninstalls a selected macro or workbench + Hautatutako makroa edo lan-mahaia desinstalatzen du + + + + Installs or updates the selected macro or workbench + Hautatutako makroa edo lan-mahaia instalatzen edo eguneratzen du + + + + Download and apply all available updates + Deskargatu eta aplikatu erabilgarri dauden eguneraketa guztiak + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Gehigarrien kudeatzailea + + + + Manage external workbenches and macros + Kudeatu kanpoko lan-mahaiak eta makroak + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm new file mode 100644 index 0000000000..177b6b5432 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts new file mode 100644 index 0000000000..75d9458cca --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Käytä + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Makrot + + + + Execute + Suorita + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm new file mode 100644 index 0000000000..8b3570346f Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts new file mode 100644 index 0000000000..a1b53193eb --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Apply + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Mga workbench + + + + Macros + Mga Macro + + + + Execute + Ipatupad + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm new file mode 100644 index 0000000000..c8f11d167f Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts new file mode 100644 index 0000000000..71cbc14b52 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Appliquer + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Ateliers + + + + Macros + Macros + + + + Execute + Lancer + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm new file mode 100644 index 0000000000..05c27dd9f6 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts new file mode 100644 index 0000000000..fb6c920c29 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Imposible recuperar o código desta macro. + + + + Unable to retrieve a description for this macro. + Imposible recuperar a descrición para esta macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + As addons que se poden instalar aqui non son parte oficial de FreeCAD, e non son revisadas polo equipo de FreeCAD. Está certo de que sabes o que estás instalando! + + + + Addon manager + Xestión de complementos + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Tes que reiniciar FreeCAD para que os trocos teñan efecto. Preme Ok para reiniciar FreeCAD agora, ou Cancelar para reiniciar despois. + + + + Checking for updates... + Comprobando actualizacións... + + + + Apply + Aplicar + + + + update(s) + actualizar + + + + No update available + Sen actualización dispoñible + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro instalada correctamente. A macro está agora dispoñible dende o diálogo macros. + + + + Unable to install + Non se pode instalar + + + + Addon successfully removed. Please restart FreeCAD + Addon correctamente eliminado. Fai o favor de reiniciar FreeCAD + + + + Unable to remove this addon + Non se pode eliminar este addon + + + + Macro successfully removed. + A macro foi removida con éxito. + + + + Macro could not be removed. + A macro non pode ser removida. + + + + Unable to download addon list. + Non se pode descargar a lista de addon. + + + + Workbenches list was updated. + A lista de bancos de traballo foi actualizada. + + + + Outdated GitPython detected, consider upgrading with pip. + Detectado GitPython caducado, considera actualizar con pip. + + + + List of macros successfully retrieved. + Lista de macros recuperada con éxito. + + + + Retrieving description... + Recuperando descrición... + + + + Retrieving info from + Recuperando información dende + + + + An update is available for this addon. + Unha actualización está dispoñible para este engadido. + + + + This addon is already installed. + Este engadido xa está instalado. + + + + This add-on is marked as obsolete + Este engadido está marcado como obsoleto + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + Esto xeralmente significa que xa non é mantido, e algunhas addons máis avanzadas nesta lista proven a mesma funcionalidade. + + + + Retrieving info from git + Recuperando información dende git + + + + Retrieving info from wiki + Recuperando información dende wiki + + + + GitPython not found. Using standard download instead. + GitPython non atopado. Utilizando descarga estándard no seu lugar. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + A túa versión de python non parece ser compatible con ficheiros ZIP. Non é posible proceder. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + O banco de traballo instalado correctamente. Fai o favor de reiniciar FreeCAD para aplicar os trocos. + + + + Missing workbench + Perdido banco de traballo + + + + Missing python module + Perdido módulo python + + + + Missing optional python module (doesn't prevent installing) + Módulo python opcional perdido (non impide a instalación) + + + + Some errors were found that prevent to install this workbench + Algúns erros atopados que impiden instalar este banco de traballo + + + + Please install the missing components first. + Fai o favor de instalar os compoñentes que falta primeiro. + + + + Error: Unable to download + Erro: A descarga non vai + + + + Successfully installed + Instalado con éxito + + + + GitPython not installed! Cannot retrieve macros from git + GitPyton non instalado! Non se pode recuperar macros dende o git + + + + Unable to clean macro code + Non se pode limpar o código da macro + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Xestión de complementos + + + + Workbenches + Bancos de traballo + + + + Macros + Macros + + + + Execute + Executar + + + + Downloading info... + Descargando información... + + + + Update all + Actualizar todo + + + + Executes the selected macro, if installed + Executa a macro escolmada, se está instalada + + + + Uninstalls a selected macro or workbench + Desinstala unha macro escolmada ou banco de traballo + + + + Installs or updates the selected macro or workbench + Instalar ou actualizar a macro escolmada ou banco de traballo + + + + Download and apply all available updates + Descargar e aplicar tódalas actualizacións dispoñibles + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Xestión de complementos + + + + Manage external workbenches and macros + Xestionar bancos de traballo externos e macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm new file mode 100644 index 0000000000..6af0ab8708 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts new file mode 100644 index 0000000000..69c13760fa --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Primijeni + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Radne površine + + + + Macros + Makronaredbe + + + + Execute + Izvršiti + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm new file mode 100644 index 0000000000..0f6786f31f Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts new file mode 100644 index 0000000000..125dff7132 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Alkalmaz + + + + update(s) + frissítés(ek) + + + + No update available + Nem érhető el frissítés + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Nem telepíthető + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + A kiegészítő eltávolítása nem lehetséges + + + + Macro successfully removed. + Makró sikeresen törölve. + + + + Macro could not be removed. + Makró eltávolítása sikertelen. + + + + Unable to download addon list. + A kiegészítő letöltése sikertelen. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Munkafelületek + + + + Macros + Makrók + + + + Execute + Végrehajtás + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm new file mode 100644 index 0000000000..b686255985 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts new file mode 100644 index 0000000000..578f8acc08 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Apply + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Makro + + + + Execute + Menjalankan + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm new file mode 100644 index 0000000000..5c78fae3ab Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts new file mode 100644 index 0000000000..f5c96bba86 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Impossibile recuperare il codice di questa macro. + + + + Unable to retrieve a description for this macro. + Impossibile recuperare una descrizione per questa macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + Gli addons che possono essere installati da qui non sono parte ufficiale di FreeCAD e non sono revisionati dal team FreeCAD. Accertarsi di sapere cosa si sta installando! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Per rendere effettive le modifiche è necessario riavviare FreeCAD. Premere Ok per riavviare FreeCAD ora, o Annulla per riavviare più tardi. + + + + Checking for updates... + Controllo aggiornamenti... + + + + Apply + Applica + + + + update(s) + aggiornamento/i + + + + No update available + Nessun aggiornamento disponibile + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro installata con successo. Ora la macro è disponibile dalla finestra di dialogo Macro. + + + + Unable to install + Impossibile installare + + + + Addon successfully removed. Please restart FreeCAD + Addon rimosso con successo. Si prega di riavviare FreeCAD + + + + Unable to remove this addon + Impossibile rimuovere questo addon + + + + Macro successfully removed. + Macro rimossa con successo. + + + + Macro could not be removed. + Impossibile rimuovere la macro. + + + + Unable to download addon list. + Impossibile scaricare la lista degli addon. + + + + Workbenches list was updated. + Elenco degli ambienti di lavoro aggiornato. + + + + Outdated GitPython detected, consider upgrading with pip. + Rilevato GitPython obsoleto, considerare di aggiornarlo con pip. + + + + List of macros successfully retrieved. + Lista delle macro recuperata con successo. + + + + Retrieving description... + Recupero descrizione... + + + + Retrieving info from + Recupero informazioni da + + + + An update is available for this addon. + Per questo addon è disponibile un aggiornamento. + + + + This addon is already installed. + Questo addon è già installato. + + + + This add-on is marked as obsolete + Questo addon è contrassegnato come obsoleto + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + Questo di solito significa che non è più mantenuto e alcuni addon in questa lista forniscono la stessa funzionalità. + + + + Retrieving info from git + Recupero informazioni da git + + + + Retrieving info from wiki + Recupero informazioni dal wiki + + + + GitPython not found. Using standard download instead. + GitPython non trovato. In sostituzione, usare il download standard. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Sembra che la versione di python non supporti i file ZIP. Impossibile procedere. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Ambiente di lavoro installato correttamente. Riavviare FreeCAD per applicare le modifiche. + + + + Missing workbench + Ambiente di lavoro mancante + + + + Missing python module + Modulo python mancante + + + + Missing optional python module (doesn't prevent installing) + Modulo Python opzionale mancante (ma non impedisce l'installazione) + + + + Some errors were found that prevent to install this workbench + Sono stati trovati alcuni errori che impediscono di installare questo ambiente di lavoro + + + + Please install the missing components first. + Si prega di installare prima i componenti mancanti. + + + + Error: Unable to download + Errore: download impossibile + + + + Successfully installed + Installazione riuscita + + + + GitPython not installed! Cannot retrieve macros from git + GitPython non installato! Impossibile recuperare la macro da git + + + + Unable to clean macro code + Impossibile pulire il codice macro + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addon manager + + + + Workbenches + Ambienti di lavoro + + + + Macros + Macro + + + + Execute + Esegui + + + + Downloading info... + Download informazioni... + + + + Update all + Aggiorna tutto + + + + Executes the selected macro, if installed + Esegue la macro selezionata, se installata + + + + Uninstalls a selected macro or workbench + Disinstalla un ambiente di lavoro o una macro selezionata + + + + Installs or updates the selected macro or workbench + Installa o aggiorna l'ambiente di lavoro selezionato + + + + Download and apply all available updates + Scarica e applica tutti gli aggiornamenti disponibili + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Gestisce gli ambienti di lavoro e le macro esterne + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm new file mode 100644 index 0000000000..1229fcd370 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts new file mode 100644 index 0000000000..283ac2fee3 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + 適用する + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + アドオンマネージャー + + + + Workbenches + ワークベンチ + + + + Macros + マクロ + + + + Execute + 実行 + + + + Downloading info... + Downloading info... + + + + Update all + すべてアップデート + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + アドオンマネージャー(&A) + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm new file mode 100644 index 0000000000..2f44fc2159 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts new file mode 100644 index 0000000000..9c69d4cbc0 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Apply + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Ateliers + + + + Macros + Macros + + + + Execute + Lancer + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm new file mode 100644 index 0000000000..c87618631f Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts new file mode 100644 index 0000000000..1803a09df4 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Apply + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + 워크벤치 + + + + Macros + 매크로 + + + + Execute + 실행 + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm new file mode 100644 index 0000000000..ca43e5e750 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts new file mode 100644 index 0000000000..f939c0b1e9 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Pritaikyti + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Darbastaliai + + + + Macros + Makrokomandos + + + + Execute + Vykdyti + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm new file mode 100644 index 0000000000..7612408d10 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts new file mode 100644 index 0000000000..ae5f969909 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Toepassen + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Werkbanken + + + + Macros + Macro's + + + + Execute + Uitvoeren + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm new file mode 100644 index 0000000000..03fbb7976f Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts new file mode 100644 index 0000000000..1bf6179cd6 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Bruk + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Makroer + + + + Execute + Kjør + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm new file mode 100644 index 0000000000..b542cdf716 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts new file mode 100644 index 0000000000..f808ef0d1f --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Zastosuj + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Środowiska + + + + Macros + Makra + + + + Execute + Uruchom + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm new file mode 100644 index 0000000000..3c3bd7462d Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts new file mode 100644 index 0000000000..92db1124da --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Incapaz de buscar o código desta macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Gestor de Suplementos + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Verificando por atualizações... + + + + Apply + Aplicar + + + + update(s) + atualizar + + + + No update available + Sem atualização disponível + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Incapaz de instalar + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Incapaz de remover este suplemento + + + + Macro successfully removed. + Macro removida com êxito. + + + + Macro could not be removed. + A macro não pode ser removida. + + + + Unable to download addon list. + Incapaz de baixar a list de suplmentos. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Bancadas de trabalho + + + + Macros + Macros + + + + Execute + Executar + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm new file mode 100644 index 0000000000..0ca15191aa Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts new file mode 100644 index 0000000000..d829104a54 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Aplicar + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Bancadas de trabalho + + + + Macros + Macros + + + + Execute + Executar + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm new file mode 100644 index 0000000000..5dc4e9bf03 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts new file mode 100644 index 0000000000..577fe7d97c --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Aplică + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Banc de lucru + + + + Macros + Macro-uri + + + + Execute + Execută + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm new file mode 100644 index 0000000000..c15682569a Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts new file mode 100644 index 0000000000..0ea9eb01ff --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Не удается получить код этого макроса. + + + + Unable to retrieve a description for this macro. + Не удается получить описание для этого макроса. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + Дополнения, которые могут быть установлены отсюда, официально не являются частью FreeCAD и не проверяются командой FreeCAD. Убедитесь, что вы знаете, что устанавливаете! + + + + Addon manager + Менеджер дополнений + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Вы должны перезапустить FreeCAD для применения изменений. Нажмите Ok, чтобы перезапустить FreeCAD сейчас, или Отменить, чтобы перезапустить позже. + + + + Checking for updates... + Проверка обновлений... + + + + Apply + Применить + + + + update(s) + обновления + + + + No update available + Нет доступных обновлений + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Макрос успешно установлен. Макрос теперь доступен в диалоге Макросы. + + + + Unable to install + Не удалось установить + + + + Addon successfully removed. Please restart FreeCAD + Дополнение успешно удалено. Пожалуйста, перезапустите FreeCAD + + + + Unable to remove this addon + Не удается удалить это дополнение + + + + Macro successfully removed. + Макрос успешно удален. + + + + Macro could not be removed. + Макрос не может быть удален. + + + + Unable to download addon list. + Не удается загрузить список дополнений. + + + + Workbenches list was updated. + Список рабочих окружений обновлен. + + + + Outdated GitPython detected, consider upgrading with pip. + Обнаружен устаревший GitPython, рассмотрите обновление с помощью pip. + + + + List of macros successfully retrieved. + Список макросов успешно получен. + + + + Retrieving description... + Получение описания... + + + + Retrieving info from + Получение информации от + + + + An update is available for this addon. + Для этого дополнения доступно обновление. + + + + This addon is already installed. + Это дополнение уже установлено. + + + + This add-on is marked as obsolete + Это дополнение помечено как устаревшее + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + Это обычно означает, что оно больше не поддерживается, и некоторые более продвинутые дополнения в этом списке обеспечивают те же функции. + + + + Retrieving info from git + Получение информации из git + + + + Retrieving info from wiki + Получение информации из вики + + + + GitPython not found. Using standard download instead. + GitPython не найден. Вместо этого используется стандартная загрузка. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + По-видимому, ваша версия python не поддерживает ZIP файлы. Продолжение невозможно. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Рабочее окружение успешно установлено. Пожалуйста, перезапустите FreeCAD для применения изменений. + + + + Missing workbench + Отсутствует рабочее окружение + + + + Missing python module + Отсутствует модуль python + + + + Missing optional python module (doesn't prevent installing) + Отсутствует дополнительный модуль python (не запрещает установку) + + + + Some errors were found that prevent to install this workbench + Найдены некоторые ошибки, которые мешают установке этого рабочего окружения + + + + Please install the missing components first. + Сначала установите недостающие компоненты. + + + + Error: Unable to download + Ошибка: Не удалось загрузить + + + + Successfully installed + Успешно установлено + + + + GitPython not installed! Cannot retrieve macros from git + GitPython не установлен! Не удается получить макрос из git + + + + Unable to clean macro code + Не удается очистить код макроса + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Менеджер дополнений + + + + Workbenches + Рабочие окружения + + + + Macros + Макрос + + + + Execute + Выполнить + + + + Downloading info... + Загрузка информации... + + + + Update all + Обновить все + + + + Executes the selected macro, if installed + Выполняет выбранный макрос, если установлен + + + + Uninstalls a selected macro or workbench + Удаление выбранного макроса или рабочего окружения + + + + Installs or updates the selected macro or workbench + Устанавливает или обновляет выбранный макрос или рабочее окружение + + + + Download and apply all available updates + Скачать и применить все доступные обновления + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Менеджер дополнений + + + + Manage external workbenches and macros + Управление внешними рабочими окружениями и макросами + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm new file mode 100644 index 0000000000..5c535a6c60 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts new file mode 100644 index 0000000000..49fc3a0b0d --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Použiť + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Makrá + + + + Execute + Vykonať + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm new file mode 100644 index 0000000000..15d52bb66b Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts new file mode 100644 index 0000000000..ccc167c2a0 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Kode tega makra ni mogoče pridobiti. + + + + Unable to retrieve a description for this macro. + Opisa tega makra ni mogoče pridobiti. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + Dodatki, ki jih je tukaj mogoče namestiti, niso uradno del FreeCADA in jih osebje FreeCADA ni pregledalo. Zato poskrbite, da pred namestitivijo izdelek poznate! + + + + Addon manager + Upravljalnik dodatkov + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + Za uveljavitev sprememb je potrebno FreeCAD ponovno zaganti. Za takojšen ponovni zagon klinite V redu, če želite ponovno zagnati kasneje, pa kliknite Prekliči. + + + + Checking for updates... + Preverjam za posodobitve... + + + + Apply + Uveljavi + + + + update(s) + posodobitev(-ve) + + + + No update available + Posodobitev ni na voljo + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Makro uspešno nameščen. Sedaj je dostopen skozi pogovorno okno Makri. + + + + Unable to install + Ni mogoče namestiti + + + + Addon successfully removed. Please restart FreeCAD + Dodatek uspešno odstranjen. Ponovno zaženite FreeCAD + + + + Unable to remove this addon + Tega dodatka ni mogoče odstraniti + + + + Macro successfully removed. + Makro uspešno odstranjen. + + + + Macro could not be removed. + Makra ni bilo mogoče odstraniti. + + + + Unable to download addon list. + Seznama dodatkov ni bilo mogoče prenesti. + + + + Workbenches list was updated. + Seznam delovnih okolij je bil posodobljen. + + + + Outdated GitPython detected, consider upgrading with pip. + Zaznan je zastarel GitPython; razmislite o nadgraditivi s pip-om. + + + + List of macros successfully retrieved. + Seznam makrov uspšno pridobljen. + + + + Retrieving description... + Pridobivanje opisov ... + + + + Retrieving info from + Pridobivanje podatkov iz + + + + An update is available for this addon. + Posodobitev za ta dodatek je na voljo. + + + + This addon is already installed. + Ta dodatek je že nameščen. + + + + This add-on is marked as obsolete + Ta dodatek je označen kot zastarel + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + To ponavadi pomeni, da ni več vzdrževan in naprednejši dodatek s tega seznama nudi enake zmožnosti. + + + + Retrieving info from git + Pridobivanje podatkov iz git-a + + + + Retrieving info from wiki + Pridobivanje podatkov iz wiki strani + + + + GitPython not found. Using standard download instead. + GitPython ni mogoče najti. Namesto tega je običajno prenašanje. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Kot kaže, vaša različica Pythona ne podpira datotek ZIP. Ni mogoče nadaljevati. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Delovno okolje uspešno nameščeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. + + + + Missing workbench + Manjkajoče delovno oklje + + + + Missing python module + Manjkajoči Pythonov modul + + + + Missing optional python module (doesn't prevent installing) + Manjkajoči neobvezni Pythonov modul (ne ustavi namestitve) + + + + Some errors were found that prevent to install this workbench + Najdene so bile določene napake, ki preprečujejo namestitev tega delovnega okolja + + + + Please install the missing components first. + Namestite najprej manjkajoče sestavine. + + + + Error: Unable to download + Napaka: Ni mogoče prenesti + + + + Successfully installed + Uspešno nameščeno + + + + GitPython not installed! Cannot retrieve macros from git + GitPython ni nameščen! Makrov ni mogoče pridobiti iz git-a + + + + Unable to clean macro code + Kode makra ni mogoče izčistiti + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Upravljalnik dodatkov + + + + Workbenches + Delovna okolja + + + + Macros + Makri + + + + Execute + Izvedi + + + + Downloading info... + Prenašanje podatkov ... + + + + Update all + Posodobi vse + + + + Executes the selected macro, if installed + Izvedi izbrani makro, če je nameščen + + + + Uninstalls a selected macro or workbench + Odnamesti izbrani makro ali delovno okolje + + + + Installs or updates the selected macro or workbench + Namesti ali posodobi izbrani makro ali delovno okolje + + + + Download and apply all available updates + Prenesi in uporabi vse razpoložljive posodobitve + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Upravljalnik dodatkov + + + + Manage external workbenches and macros + Upravljaj z zunanjimi delovnimi okolji in makri + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm new file mode 100644 index 0000000000..db66c39e2c Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts new file mode 100644 index 0000000000..630e2fccf7 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Примени + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Workbenches + + + + Macros + Макронаредбе + + + + Execute + Изврши + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm new file mode 100644 index 0000000000..87742f725f Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts new file mode 100644 index 0000000000..62363da74f --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Verkställ + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Arbetsbänkar + + + + Macros + Makron + + + + Execute + Utför + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm new file mode 100644 index 0000000000..6ebed4b575 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts new file mode 100644 index 0000000000..a34ec44f8c --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Uygula + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Tezgah + + + + Macros + Makrolar + + + + Execute + Çalıştır + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm new file mode 100644 index 0000000000..daf1bce34e Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts new file mode 100644 index 0000000000..004f3035a6 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Менеджер додатків + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Перевірка наявності оновлень... + + + + Apply + Застосувати + + + + update(s) + оновлення + + + + No update available + Оновлень немає + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Макрос успішно встановлений. Відтепер цей макрос доступний у діалоговому вікні Макроси. + + + + Unable to install + Встановити не вдалося + + + + Addon successfully removed. Please restart FreeCAD + Додаток успішно видалений. Перезапустіть FreeCAD, будь ласка + + + + Unable to remove this addon + Неможливо видалити цей додаток + + + + Macro successfully removed. + Макрос успішно видалений. + + + + Macro could not be removed. + Макрос не може бути видалений. + + + + Unable to download addon list. + Неможливо завантажити перелік додатків. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Отримання опису... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + Для цього додатка наявне оновлення. + + + + This addon is already installed. + Цей додаток вже встановлений. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Відсутній модуль python + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Помилка: завантаження неможливе + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Робочі середовища + + + + Macros + Макроси + + + + Execute + Виконати + + + + Downloading info... + Downloading info... + + + + Update all + Оновити все + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Менеджер додатків + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm new file mode 100644 index 0000000000..ef880ba226 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts new file mode 100644 index 0000000000..9a78700c43 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Aplica + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Bancs de treball + + + + Macros + Macros + + + + Execute + Executa + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm new file mode 100644 index 0000000000..2ca7c8b454 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts new file mode 100644 index 0000000000..be58b46fd6 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + Apply + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + Bàn làm việc + + + + Macros + Macro + + + + Execute + Thực thi + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm new file mode 100644 index 0000000000..c8560d51c1 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts new file mode 100644 index 0000000000..12c6077787 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + 无法获取此宏的代码。 + + + + Unable to retrieve a description for this macro. + 无法获取此宏的描述。 + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + 在此安装的插件不是 FreeCAD 的官方内容，也未经 FreeCAD 团队审核。请确保您知道您所安装的内容！ + + + + Addon manager + 插件管理器 + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + 必须重新启动FreeCAD，以便更改生效。按确认立即重启FreeCAD，如您要稍后再重启，请按取消。 + + + + Checking for updates... + 正在检查更新... + + + + Apply + 应用 + + + + update(s) + 更新(s) + + + + No update available + 已是最新版本 + + + + Macro successfully installed. The macro is now available from the Macros dialog. + 宏安装成功。可以从宏对话框中访问。 + + + + Unable to install + 无法安装 + + + + Addon successfully removed. Please restart FreeCAD + 插件已被成功删除。请重新启动FreeCAD + + + + Unable to remove this addon + 无法删除此插件 + + + + Macro successfully removed. + 宏被成功删除。 + + + + Macro could not be removed. + 无法删除宏。 + + + + Unable to download addon list. + 无法下载插件列表。 + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + 检测到过时的 GitPython，建议您使用pip进行升级。 + + + + List of macros successfully retrieved. + 成功获取了宏列表。 + + + + Retrieving description... + 正在获取描述... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + 工作台 + + + + Macros + 宏 + + + + Execute + 执行 + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm new file mode 100644 index 0000000000..fbea257d12 Binary files /dev/null and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts new file mode 100644 index 0000000000..790dd4cc47 --- /dev/null +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -0,0 +1,338 @@ + + + + + AddonsInstaller + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description for this macro. + Unable to retrieve a description for this macro. + + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + Checking for updates... + Checking for updates... + + + + Apply + 應用 + + + + update(s) + update(s) + + + + No update available + No update available + + + + Macro successfully installed. The macro is now available from the Macros dialog. + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Unable to install + Unable to install + + + + Addon successfully removed. Please restart FreeCAD + Addon successfully removed. Please restart FreeCAD + + + + Unable to remove this addon + Unable to remove this addon + + + + Macro successfully removed. + Macro successfully removed. + + + + Macro could not be removed. + Macro could not be removed. + + + + Unable to download addon list. + Unable to download addon list. + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Outdated GitPython detected, consider upgrading with pip. + Outdated GitPython detected, consider upgrading with pip. + + + + List of macros successfully retrieved. + List of macros successfully retrieved. + + + + Retrieving description... + Retrieving description... + + + + Retrieving info from + Retrieving info from + + + + An update is available for this addon. + An update is available for this addon. + + + + This addon is already installed. + This addon is already installed. + + + + This add-on is marked as obsolete + This add-on is marked as obsolete + + + + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + This usually means it is no longer maintained, and some more advanced add-on in this list provides the same functionality. + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + GitPython not found. Using standard download instead. + GitPython not found. Using standard download instead. + + + + Your version of python doesn't appear to support ZIP files. Unable to proceed. + Your version of python doesn't appear to support ZIP files. Unable to proceed. + + + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + Missing workbench + Missing workbench + + + + Missing python module + Missing python module + + + + Missing optional python module (doesn't prevent installing) + Missing optional python module (doesn't prevent installing) + + + + Some errors were found that prevent to install this workbench + Some errors were found that prevent to install this workbench + + + + Please install the missing components first. + Please install the missing components first. + + + + Error: Unable to download + Error: Unable to download + + + + Successfully installed + Successfully installed + + + + GitPython not installed! Cannot retrieve macros from git + GitPython not installed! Cannot retrieve macros from git + + + + Unable to clean macro code + Unable to clean macro code + + + + Installed + Installed + + + + Update available + Update available + + + + Restart required + Restart required + + + + This macro is already installed. + This macro is already installed. + + + + A macro has been installed and is available under Macro -> Macros menu + A macro has been installed and is available under Macro -> Macros menu + + + + Dialog + + + Addons manager + Addons manager + + + + Workbenches + 工作臺 + + + + Macros + 巨集 + + + + Execute + 執行 + + + + Downloading info... + Downloading info... + + + + Update all + Update all + + + + Executes the selected macro, if installed + Executes the selected macro, if installed + + + + Uninstalls a selected macro or workbench + Uninstalls a selected macro or workbench + + + + Installs or updates the selected macro or workbench + Installs or updates the selected macro or workbench + + + + Download and apply all available updates + Download and apply all available updates + + + + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + If this option is checked, when launching the Addon Manager, installed addons will be checked for available updates (requires the python-git package installed on your system) + + + + Automatically check for updates at start (requires python-git) + Automatically check for updates at start (requires python-git) + + + + Custom repositories (one per line): + Custom repositories (one per line): + + + + You can use this window to specify additional addon repositories to be scanned for available addons + You can use this window to specify additional addon repositories to be scanned for available addons + + + + Sets configuration options for the Addon Manager + Sets configuration options for the Addon Manager + + + + Configure... + Configure... + + + + Addon manager options + Addon manager options + + + + Uninstall selected + Uninstall selected + + + + Install/update selected + Install/update selected + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches and macros + Manage external workbenches and macros + + + diff --git a/src/Mod/Arch/Resources/translations/Arch_af.qm b/src/Mod/Arch/Resources/translations/Arch_af.qm index d8f962faf8..af1c43d09c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_af.qm and b/src/Mod/Arch/Resources/translations/Arch_af.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_af.ts b/src/Mod/Arch/Resources/translations/Arch_af.ts index 7dd02861ad..dfa9e66b8f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_af.ts +++ b/src/Mod/Arch/Resources/translations/Arch_af.ts @@ -44,12 +44,12 @@ Die objek wat deur hierdie komponent gekloon word - + Other shapes that are appended to this object Ander vorms wat aangeheg is aan hierdie objek - + Other shapes that are subtracted from this object Ander vorms wat afgetrek word van hierdie objek @@ -79,7 +79,7 @@ Die area van alle vertikale aansigte van hierdie objek - + The area of the projection of this object onto the XY plane Die area van die projeksie van hierdie objek op die XY vlak @@ -114,7 +114,7 @@ Die berekende vloeroppervlak van hierdie vloer - + The placement of this object Die plasing van hierdie objek @@ -144,12 +144,12 @@ Die rotasie van die profiel om sy extrusie as - + The length of this element, if not based on a profile Die lengte van hierdie element, indien nie gebaseer op 'n profiel nie - + The width of this element, if not based on a profile Die breedte van hierdie element, indien nie gebaseer op 'n profiel nie @@ -194,22 +194,22 @@ Die oppervlak van hierdie paneel - + The facemaker type to use to build the profile of this object Die aansigmaker tipe om te gebruik om die profiel van hierdie objek te bou - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Die normale extrusie rigting van hierdie voorwerp (behou (0,0,0) vir outomatiese normaallyn) - + The linked object Die geskakelde objek - + The line width of the rendered objects Die lyn breedte van die ingeklede voorwerpe @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponente @@ -1717,12 +1742,12 @@ Skep As - + Remove Verwyder - + Add Voeg by @@ -1832,87 +1857,87 @@ Aansig van - + Create Section Plane Skep snydingsvlak - + Create Site Skep ligging - + Create Structure Skep struktuur - + Create Wall Skep muur - + Width Breedte - + Height Hoogte - + Error: Invalid base object Fout: Ongeldige basisvoorwerp - + This mesh is an invalid solid Hierdie maas is 'n ongeldig soliede - + Create Window Skep venster - + Edit Wysig - + Create/update component Skep/opdateer die komponent - + Base 2D object Basis 2D-komponent - + Wires Drade - + Create new component Skep 'n nuwe komponent - + Name Naam - + Type Soort - + Thickness Dikte @@ -1922,7 +1947,7 @@ Fout: Kon nie karakterenkodering bepaal nie - + file %s successfully created. lêer %s suksesvol geskep. @@ -1972,32 +1997,32 @@ Create Stairs - + Length Lengte - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls @@ -2012,7 +2037,7 @@ Error computing the shape of this object - + Create Structural System Create Structural System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Height (mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category Kategorie - + Key Key @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Waarde - + Unit Eenheid - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Chamfer - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Verplasing @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Center - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Links + + + + Right + Regs + + + + Use sketches + Use sketches + + + + Structure + Struktuur + + + + Window + Venster + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Checks the selected objects for problems - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Snitvlak - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Plek - + Creates a site object including selected objects. Skep 'n plaaslike voorwerp wat die gekose voorwerpe insluit. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktuur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Skep 'n struktuurvoorwerp opnuut of van 'n gekose voorwerp (skets, draad, oppervlak of soliede) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Venster - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. Deursigtigheid: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Dikte - + Force export as Brep Force export as Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Line color - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.qm b/src/Mod/Arch/Resources/translations/Arch_ar.qm index a243776dcd..76b9310a8e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ar.qm and b/src/Mod/Arch/Resources/translations/Arch_ar.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.ts b/src/Mod/Arch/Resources/translations/Arch_ar.ts index a9dc2889f6..bbf8f1ce58 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ar.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ar.ts @@ -44,12 +44,12 @@ الكائن هو استنساخ هذا المكون - + Other shapes that are appended to this object الأشكال الأخرى التي تم إلحاقها بهذا الكائن - + Other shapes that are subtracted from this object الأشكال الأخرى التي تم إستخراجها من هذا الكائن @@ -79,7 +79,7 @@ مساحة كل الوجوه العمودية من هذا الكائن - + The area of the projection of this object onto the XY plane منطقة الإسقاط لهذا الكائن على سطح مستو XY @@ -114,7 +114,7 @@ مساحة أرضية المحسوبة من هذه الطابق - + The placement of this object موضع هذا الكائن @@ -144,12 +144,12 @@ دوران الشحصية حول محور بثقها - + The length of this element, if not based on a profile طول هذا العنصر، إذا كان لا يستند إلى الملف الشخصي - + The width of this element, if not based on a profile عرض هذا العنصر، إذا كان لا يستند إلى الملف الشخصي @@ -194,22 +194,22 @@ منطقة هذه اللوحة - + The facemaker type to use to build the profile of this object نوع صانع الوجه الذي سيتم استخدامه لإنشاء ملف تعريفي لهذا الكائن - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) إتجاه البثق العادي لهذا الكائن (يبقي (0،0،0) بالنسبة للتلقائي العادي) - + The linked object الكائن المرتبط - + The line width of the rendered objects عرض الخط من الكائنات المطلية @@ -349,7 +349,7 @@ ارتفاع هذا العنصر - + The structural nodes of this element العقد الهيكلية لهذا العنصر @@ -614,132 +614,132 @@ جدول البيانات لطباعة النتائج ل - + If false, non-solids will be cut too, with possible wrong results. إذا كان خطأ، سيتم قطع المواد غير الصلبة أيضا، مع نتائج خاطئة محتملة. - + The display length of this section plane عرض طول هذا القسم - + The display height of this section plane عرض ارتفاع هذا القسم - + The size of the arrows of this section plane حجم أسهم هذا القسم - + Show the cut in the 3D view عرض القطع في في عرض ثلاثي الأبعاد - + The rendering mode to use وضع تقديم للاستخدام - + If cut geometry is shown or not إذا تم عرض اقتطاع الهندسة أم لا - + If cut geometry is filled or not إذا تم ملء اقتطاع الهندسة أم لا - + The size of the texts inside this object حجم النصوص داخل هذا الكائن - + If checked, source objects are displayed regardless of being visible in the 3D model إذا تم تحديدها، يتم عرض مصدر الكائنات بغض النظر عن كونها مرئية في نموذج 3D - + The base terrain of this site التضاريس الأساسية لهذا الموقع - + The postal or zip code of this site الرمز البريدي أو الرقم البريدي لهذا الموقع - + The city of this site المدينة من هذا الموقع - + The country of this site البلاد من هذا الموقع - + The latitude of this site خط العرض لهذا الموقع - + Angle between the true North and the North direction in this document زاوية بين الشمال الحقيقي واتجاه الشمال في هذه الوثيقة - + The elevation of level 0 of this site ارتفاع مستوى 0 من هذا الموقع - + The perimeter length of this terrain طول محيط هذه التضاريس - + The volume of earth to be added to this terrain حجم الأرض الذي سيضاف إلى هذه التضاريس - + The volume of earth to be removed from this terrain حجم الأرض المراد إزالته من هذه التضاريس - + An extrusion vector to use when performing boolean operations ناقلات البثق لاستخدامها عند تنفيذ عمليات منطقية - + Remove splitters from the resulting shape إزالة الشقوق من الشكل الناتج - + Show solar diagram or not عرض الرسم التخطيطي الشمسي أم لا - + The scale of the solar diagram مقياس الرسم الشمسي - + The position of the solar diagram موضع الرسم الشمسي - + The color of the solar diagram لون الرسم التخطيطي الشمسي @@ -785,81 +785,76 @@ - A zone this space is part of - منطقة هذا الفضاء هو جزء من - - - The number of people who typically occupy this space عدد الأشخاص الذين يشغلون هذه المساحة عادة - + The electric power needed to light this space in Watts الطاقة الكهربائية اللازمة لإضاءة هذا الفضاء بالواط - + The electric power needed by the equipment of this space in Watts الطاقة الكهربائية التي تحتاجها المعدات من هذا الفضاء بالواط - + If True, Equipment Power will be automatically filled by the equipment included in this space إذا كان صحيح، سيتم ملء معدات الطاقة تلقائيا من المعدات المدرجة في هذا الفضاء - + The type of air conditioning of this space نوع من تكييف الهواء من هذا الفضاء - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data النص المراد إظهاره. استخدم ceiling, $walls, $floor, $tag, $label, $area$ لإدراج البيانات ذات الصلة - + The name of the font اسم الخط - + The color of the area text لون نص المنطقة - + The size of the text font حجم خط النص - + The size of the first line of text حجم السطر الأول من النص - + The space between the lines of text المسافة بين سطور النص - + The position of the text. Leave (0,0,0) for automatic position موقف النص. إترك (0،0،0) لموقف تلقائي - + The justification of the text تبرير النص - + The number of decimals to use for calculated texts عدد الكسور العشرية التي سيتم استخدامها للنصوص المحسوبة - + Show the unit suffix عرض لاحقة الوحدة @@ -939,102 +934,102 @@ الإزاحة بين حدود الدرج والهيكل - + An optional extrusion path for this element مسار بثق اختياري لهذا العنصر - + The height or extrusion depth of this element. Keep 0 for automatic ارتفاع أو قذف عمق هذا العنصر. حافظ على 0 تلقائيا - + A description of the standard profile this element is based upon وصف للملف المعياري الذي يستند إليه هذا العنصر - + Offset distance between the centerline and the nodes line إزاحة المسافة بين خط الوسط وخط العقد - + If the nodes are visible or not إذا كانت العقد مرئية أم لا - + The width of the nodes line عرض خط العقد - + The size of the node points حجم نقاط العقدة - + The color of the nodes line لون خط العقد - + The type of structural node نوع العقدة الهيكلية - + Axes systems this structure is built on أنظمة المحاور بنيت على هذا الهيكل - + The element numbers to exclude when this structure is based on axes أرقام العنصر الذي سيستبعد عندما يستند هذا الهيكل على المحاور - + If true the element are aligned with axes إذا كان صحيح يتم محاذاة العنصر مع المحاور - + The length of this wall. Not used if this wall is based on an underlying object طول هذا الجدار. لا يستخدم إذا كان هذا الجدار يستند إلى كائن أساسي - + The width of this wall. Not used if this wall is based on a face عرض هذا الجدار. لا يستخدم إذا كان هذا الجدار على أساس وجه - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid ارتفاع هذا الجدار. حافظ على 0 تلقائيا. لا يستخدم إذا كان هذا الجدار على أساس الصلابة - + The alignment of this wall on its base object, if applicable محاذاة هذا الجدار على قاعدة كائنه ، إذا كان قابل للتطبيق - + The face number of the base object used to build this wall رقم وجه الكائن الأساسي المستخدم لبناء هذا الجدار - + The offset between this wall and its baseline (only for left and right alignments) الإزاحة بين هذا الجدار وخط الأساس (فقط لمحاذاة اليسار واليمين) - + The normal direction of this window الاتجاه العادي لهذه النافذة - + The area of this window منطقة هذه النافذة @@ -1049,7 +1044,7 @@ موضع إضافي اختياري للإضافة إلى الملف الشخصي قبل طرده - + Opens the subcomponents that have a hinge defined لفتح المكونات الفرعية التي تحتوي على مفصل محدد @@ -1089,12 +1084,12 @@ لائحة سُمك الطبقات - + The line color of the projected objects لون خط الأجسام المتوقعة - + The color of the cut faces (if turned on) لون أسطح القطع (إذا كانت مشغلة) @@ -1104,7 +1099,7 @@ تداخل الحصائر مع أسفل النوائم - + The number of the wire that defines the hole. A value of 0 means automatic رقم السلك الذي يعرف الثقب. عند استخدام القيمة 0 يتم حساب القيمة أتوماتيكيا @@ -1194,7 +1189,7 @@ تباعد العرف من حديد التسليح - + Shape of rebar شكل حديد التسليح @@ -1204,17 +1199,17 @@ انقلاب اتجاه السقف إذا ذهب بطريقة خاطئة - + Shows plan opening symbols if available يعرض الرموز المفتوحة للخطة إذا كانت متوفرة - + Show elevation opening symbols if available يعرض الرموز المفتوحة للإرتفاع إذا كانت متوفرة - + The objects that host this window الكائنات التي تستضيف هذه النافذة @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object هيئة هذا العنصر - + The line width of this object عرض الخط لهذا العنصر @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object شفافية هذا العنصر - + The color of this object لون هذا العنصر - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) المسافة بين سطح القطع وقطع العرض الأصلي (حافظ على قيمة صغيرة جدا ولكن مختلفة عن الصفر) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website رابط يقوم بعرض هذا الموقع على موقع الكتروني مُخْتَصّ بالخرائط - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block طول كل كتلة - + The height of each block ارتفاع كل كتلة - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks العدد الإجمالي للكتل - + The number of broken blocks The number of broken blocks - + The components of this window مكونات هذه النافذة - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on العدد المحدد مسبقا والذي تعتمد عليه هته النافدة - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components المكونات @@ -1717,12 +1742,12 @@ انشاء محوار - + Remove إزالة - + Add إضافة @@ -1832,87 +1857,87 @@ نظرا ل - + Create Section Plane إنشاء قسم الخطة - + Create Site إنشاء موقع - + Create Structure إنشاء هيكل - + Create Wall إنشاء جدار - + Width العرض - + Height الارتفاع - + Error: Invalid base object خطأ: كائن أساسي غير صالح - + This mesh is an invalid solid هذه الشبكة صلابتها غير صالحة - + Create Window إنشاء نافذة - + Edit تعديل - + Create/update component إنشاء / تحديث المكون - + Base 2D object Base 2D object - + Wires Wires - + Create new component إنشاء مكون جديد - + Name الإسم - + Type النوع - + Thickness سمك @@ -1922,7 +1947,7 @@ خطأ: تعذر تحديد تشفير الأحرف - + file %s successfully created. تم انشاء الملف بنجاح. @@ -1972,32 +1997,32 @@ إنشاء الدرج - + Length الطول - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape تعذر حساب شكل - + Merge Wall دمج الجدار - + Please select only wall objects الرجاء تحديد أجسام الحائط فقط - + Merge Walls دمج الجدران @@ -2012,7 +2037,7 @@ حدث خطأ أثناء حساب شكل هذا الكائن - + Create Structural System إنشاء النظام الهيكلي @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela الارتفاع (مم) - + Create Component إنشاء مكون @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela الجدران يمكن ان تقوم على جزء أو شبكة الكائنات فقط - + Set text position تعيين موضع النص - + Category فئة - + Key مفتاح @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela القيمة - + Unit وحدة - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela إنشاء ورقة لوحة - + Facemaker returned an error صانع الوجه أعاد خطأ @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela إنشاء موصل - + Precast elements عناصر مسبقة الصب - + Slab type نوع البلاطة - + Chamfer Chamfer - + Dent length طول السن - + Dent width عرض السن - + Dent height ارتفاع السن - + Slab base قاعدة البلاطة - + Number of holes عدد الثقوب - + Major diameter of holes قطر كبير من الثقوب - + Minor diameter of holes قطر صغير من الثقوب - + Spacing between holes التباعد بين الثقوب - + Number of grooves عدد الأخاديد - + Depth of grooves عمق الأخاديد - + Height of grooves ارتفاع الأخاديد - + Spacing between grooves التباعد بين الأخاديد - + Number of risers Number of risers - + Length of down floor طول الطابق السفلي - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list قائمة الأسِنَّة - + Add dent إضافة سن - + Remove dent Remove dent - + Slant مائل - + Level المستوى - + Rotation الدوران - + Offset إزاحة @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela جدول - + There is no valid object in the selection. Site creation aborted. لا يوجد أي عنصر صالح وسط هذه الخيارات. تم إلغاء إنشاء الموقع. - + Node Tools Node Tools - + Reset nodes إعادة تشغيل العقد - + Edit nodes تعديل العُقَد - + Extend nodes تمديد العُقَد - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes وصل العُقَد - + Connects nodes of this element with the nodes of another element ربط عُقَد هذا العنصر مع عُقَد عنصر أخر - + Toggle all nodes تبديل كل العقد - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. الباب - + Hinge مفصل - + Opening mode وضع الافتتاح - + Get selected edge احصل على الحافة المحددة - + Press to retrieve the selected edge اضغط لاسترداد الحافة المحددة @@ -2531,17 +2556,17 @@ Site creation aborted. طبقة جديدة - + Wall Presets... إعدادات الحائط المسبقة... - + Hole wire ثقب الأسلاك - + Pick selected اختر المحدد @@ -2626,17 +2651,17 @@ Site creation aborted. لا يتوفر هذا العنصر على أي وجه - + Space boundaries حدود الفضاء - + Error: Unable to modify the base object of this wall خطأ: تَعَذّر تعديل العنصر القاعدي لهذا الجدار - + Window elements عناصر النافذة @@ -2748,7 +2773,7 @@ Building creation aborted. كل شيئ جيد! لم يتم العثور على أية مشاكل - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center مركز - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Note: You can change that in the preferences. ملاحظة: يمكنك تغيير هته الخاصية في التفضيلات. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure العنصر الذي تم اختياره ليس بهيكل - + The chosen object has no structural nodes لا يتوفر العنصر الذي تم اختياره على أي عُقَد هيكلية - + One of these objects has more than 2 nodes يتوفر أحد هذه العناصر على أكثر من عقدتين - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. تم العثور على التقاطع. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component تعذّر إنشاء المكون - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire رقم السلك(wire) الذي سيحدد الثقب في عنصر المضيف. إذا كانت القيمة هي 0 فسوف يتم اتخاد السلك الأكبر بطريقة تلقائية - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. خطأ: إن نسخة الـ IfcOpenShell الخاصة بك قديمة جدا - + Successfully written تمت كتابته بنجاح @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported تم الإستيراد بنجاح @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected اضف اختيارك - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + يسار + + + + Right + يمين + + + + Use sketches + Use sketches + + + + Structure + الهيكل + + + + Window + النافذة + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems للتحقق من الكائنات المحددة للمشاكل - - - Explore the contents of an IFC file - تصفح محتويات ملف الـ IFC - Arch_CloneComponent - + Clone component مكون استنساخ - + Clones an object as an undefined architectural component يستنسخ كائن كمكون معماري غير معروف @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component مكون - + Creates an undefined architectural component ينشئ مكون معماري غير معروف @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. مؤشرات الوجوه التي سيتم إخفائها - - Arch_IfcExplorer - - - Ifc Explorer - مستكشف Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... إنشاء جدول البيانات IFC... - + Creates a spreadsheet to store IFC properties of an object. يقوم بإنشاء جدول للبيانات لتخزين خصائص عنصر. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls دمج الجدران - + Merges the selected walls, if possible القيام بدمج الجدران المختارة، إن كان ذلك ممكنا @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site الموقع - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure الهيكل - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey بدء الاستطلاع @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window النافذة - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position كتابة موضع الكاميرا @@ -4653,7 +4780,7 @@ You can change that in the preferences. الشفافية: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. سمك - + Force export as Brep Force export as Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options خيارات التصدير @@ -4933,22 +5060,22 @@ You can change that in the preferences. السماح بالرباعية - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating ضم الأوجه القبلية عند التثليث @@ -4988,12 +5115,12 @@ You can change that in the preferences. استيراد خصائص إفك في جدول البيانات - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. تقسيم الجدران المتعددة الطبقات - + Warning, experimental feature! تحذير، ميزة تجريبية! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. تناسب العرض أثناء الاستيراد - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. إذا قمت بهذا الإختيار، فجميع خصائص عناصر(object) الـ FreeCAD سوف يتم تخزينها داخل العناصر المصدرة، للسماح بإعادة إنشاء نموذج بارامتري(parametric) عند إعادة الإستيراد. - + Export full FreeCAD parametric model تصدير نموذج FreeCAD بارامتري كامل @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. لون الخط - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.qm b/src/Mod/Arch/Resources/translations/Arch_ca.qm index effa98206c..a000bfb65b 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ca.qm and b/src/Mod/Arch/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index a2b4e55cb1..1d1c64ae9d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -44,12 +44,12 @@ L'objecte que aquest component clona - + Other shapes that are appended to this object Altres formes que s'afegeixen a aquest objecte - + Other shapes that are subtracted from this object Altres formes que són substretes d'aquest objecte @@ -79,7 +79,7 @@ L'àrea de totes les cares verticals d'aquest objecte - + The area of the projection of this object onto the XY plane L'àrea de la projecció d'aquest objecte en el pla XY @@ -114,7 +114,7 @@ L'àrea calculada d'aquesta planta - + The placement of this object La posició d'aquest objecte @@ -144,12 +144,12 @@ La rotació del perfil al voltant de l'eix d'extrusió - + The length of this element, if not based on a profile La longitud d'aquest element, si no està basat en un perfil - + The width of this element, if not based on a profile L'amplària d'aquest element, si no està basada en un perfil @@ -194,22 +194,22 @@ L'àrea d'aquest tauler - + The facemaker type to use to build the profile of this object El tipus de generador de cares que s'ha d'utilitzar per a construir el perfil d'aquest objecte - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direcció d'extrusió normal d'aquest objecte (mantín (0,0,0) per a automàtica) - + The linked object L'objecte enllaçat - + The line width of the rendered objects L'amplària de la línia dels objectes renderitzats @@ -349,7 +349,7 @@ L'alçària d'aquest element - + The structural nodes of this element Els nodes estructurals d'aquest element @@ -614,132 +614,132 @@ El full de càlcul en què s'imprimeixen els resultats - + If false, non-solids will be cut too, with possible wrong results. Si és fals, els objectes no sòlids també es tallaran, amb possibles resultats erronis - + The display length of this section plane La longigud que es visualitza del pla de secció - + The display height of this section plane L'alçària que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + Show the cut in the 3D view Mostra el tall en la vista 3D - + The rendering mode to use El mode de renderització que s'ha d'utilitzar - + If cut geometry is shown or not Si es mostra o no la geometria de tall - + If cut geometry is filled or not Si s'ompli o no la geometria de tall - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D - + The base terrain of this site El terreny base del lloc - + The postal or zip code of this site El codi postal del lloc - + The city of this site La ciutat del lloc - + The country of this site El país del lloc - + The latitude of this site La latitud del lloc - + Angle between the true North and the North direction in this document Angle entre el nord geogràfic i el nord en aquest document - + The elevation of level 0 of this site L'elevació del nivell 0 of this site - + The perimeter length of this terrain La longitud del perímetre d'aquest terreny - + The volume of earth to be added to this terrain El volum de terra que s'afegeix al terreny - + The volume of earth to be removed from this terrain El volum de terra que se suprimeix del terreny - + An extrusion vector to use when performing boolean operations Un vector d'extrusió que s'utilitza quan es realitzen operacions booleanes - + Remove splitters from the resulting shape Suprimeix els separadors de la forma resultant - + Show solar diagram or not Mostra o no el diagrama solar - + The scale of the solar diagram L'escala del diagrama solar - + The position of the solar diagram La posició del diagrama solar - + The color of the solar diagram El color del diagrama solar @@ -785,81 +785,76 @@ - A zone this space is part of - Una zona de la qual forma part aquest espai - - - The number of people who typically occupy this space El nombre de persones que ocupa generalment aquest espai - + The electric power needed to light this space in Watts La potència elèctrica necessària per a il·luminar aquest espai, en watts - + The electric power needed by the equipment of this space in Watts La potència elèctrica necessària per als equipaments d'aquest espai, en watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Si s'estableix a cert, la potència elèctrica de l'equipament s'omplirà automàticament pels equipaments d'aquest espai - + The type of air conditioning of this space El tipus d'aire condicionat d'aquest espai - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data El text que s'ha de mostrar. Utilitzeu $area, $label, $tag, $floor, $walls, $ceiling per a inserir les dades corresponents - + The name of the font El nom del tipus de lletra - + The color of the area text El color de l'àrea de text - + The size of the text font La mida del tipus de lletra del text - + The size of the first line of text La mida de la primera línia del text - + The space between the lines of text L'espaiat entre les línies de text - + The position of the text. Leave (0,0,0) for automatic position La posició del text. Deixeu (0,0,0) per a la posició automàtica al centre - + The justification of the text La justificació del text - + The number of decimals to use for calculated texts El nombre de decimals que s'ha d'utilitzar per als textos calculats - + Show the unit suffix Mostra el sufix de la unitat @@ -939,102 +934,102 @@ La distància entre la vora de l'escala i l'estructura - + An optional extrusion path for this element Un camí opcional d'extrusió per a aquest element - + The height or extrusion depth of this element. Keep 0 for automatic L'alçària o profunditat d'extrusió d'aquest element. Mantín 0 per a automàtica - + A description of the standard profile this element is based upon Una descripció del perfil estàndard en què es basa aquest element - + Offset distance between the centerline and the nodes line Distància de separació entre la línia central i la línia de nodes - + If the nodes are visible or not Si els nodes són visibles o no - + The width of the nodes line L'amplària de la línia de nodes - + The size of the node points La mida dels punts de node - + The color of the nodes line El color de la línia de nodes - + The type of structural node El tipus de node estructural - + Axes systems this structure is built on Sistema d'eixos sobre el qual està construïda aquesta estructura - + The element numbers to exclude when this structure is based on axes El nombre d'elements que s'han d'excloure quan l'estructura es basa en eixos - + If true the element are aligned with axes Si s'estableix a cert, l'element s'alinea amb els eixos - + The length of this wall. Not used if this wall is based on an underlying object La longitud del mur. No s'utilitza si el mur es basa en un objecte subjacent - + The width of this wall. Not used if this wall is based on a face L'amplària del mur. No s'utilitza si el mur es basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid L'alçària del mur. Manteniu 0 per a automàtica. No s'utilitza si el mur es basa en un sòlid - + The alignment of this wall on its base object, if applicable L'alineació del mur sobre el seu objecte de base, si correspon - + The face number of the base object used to build this wall El número de la cara de l'objecte de base utilitzat per a construir el mur - + The offset between this wall and its baseline (only for left and right alignments) La distància entre el mur i la seua línia de base (només per a les alineacions dreta i esquerra) - + The normal direction of this window La direcció normal de la finestra - + The area of this window L'àrea de la finestra @@ -1049,7 +1044,7 @@ Un emplaçament opcional addicional per a afegir al perfil abans d'extrudir-lo - + Opens the subcomponents that have a hinge defined Obri els subcomponents que tenen una frontissa definida @@ -1089,12 +1084,12 @@ La llista dels gruixos de capa - + The line color of the projected objects El color de la línia dels objectes projectats - + The color of the cut faces (if turned on) El color de les cares retallades (si està activat) @@ -1104,7 +1099,7 @@ La superposició dels muntants d'escala sobre la part inferior de les esteses - + The number of the wire that defines the hole. A value of 0 means automatic El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic @@ -1194,7 +1189,7 @@ L'espaiat personalitzat de l'armadura corrugada - + Shape of rebar Forma de l'armadura corrugada @@ -1204,17 +1199,17 @@ Inverteix la direcció de la teulada si va en direcció equivocada - + Shows plan opening symbols if available Mostra els símbols d'obertura de la planta, si està disponible - + Show elevation opening symbols if available Mostra els símbols d'obertura de l'elevació, si està disponible - + The objects that host this window Els objectes que acollirà aquesta finestra @@ -1269,12 +1264,12 @@ El nivell del punt (0,0,0) d'aquest nivell - + The shape of this object La forma d'aquest objecte - + The line width of this object El gruix de la línia d'aquest objecte @@ -1414,47 +1409,47 @@ Si és cert, els colors de l'arxiu vinculat es mantindran actualitzats - + The objects that must be considered by this section plane. Empty means the whole document. Els objectes que han de ser considerats amb aquest pla de secció. Buit significa tot el document. - + The transparency of this object La transparència d'aquest objecte - + The color of this object El color d'aquest objecte - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distancia entre el pla de tall i la vista actual de tall (mantenir aquest valor molt baix però no a zero) - + The street and house number of this site, with postal box or apartment number if needed El carrer i el número d'aquest lloc, amb el número d'apartament si és necessari - + The region, province or county of this site La població, província o país del lloc - + A url that shows this site in a mapping website Una URL que mostra aquest lloc en un lloc web de mapeig - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Un desplaçament opcional entre l'origen del model (0,0,0) i el punt indicat per les coordenades geogràfiques - + Specifies if this space is internal or external Especifica si aquest espai és intern o extern @@ -1504,97 +1499,97 @@ L 'esquema esquerra' de tots els segments de les escales - + Enable this to make the wall generate blocks Habilita aquesta opció per fer que la paret generi blocs - + The length of each block La longitud de cada bloc - + The height of each block L'altura de cada bloc - + The horizontal offset of the first line of blocks El desplaçament horitzontal de la primera línia de blocs - + The horizontal offset of the second line of blocks El desplaçament horitzontal de la segona línia de blocs - + The size of the joints between each block La mida de juntes entre cada bloc - + The number of entire blocks El nombre de blocs sencers - + The number of broken blocks El nombre de blocs trencats - + The components of this window Els components d'aquesta finestra - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. La profunditat del forat que aquesta finestra fa al seu objecte amfitrió. So és 0, el valor es calcularà automàticament. - + An optional object that defines a volume to be subtracted from hosts of this window Un objecte opcional que defineix un volum a sostreure des de l'amfitrió d'aquesta finestra - + The width of this window L'amplària d'aquesta finestra - + The height of this window L'alçada d'aquesta finestra - + The preset number this window is based on El número preestablert en que es basa aquesta finestra - + The frame size of this window La mida del marc d'aquest finestra - + The offset size of this window La mida d'òfset d'aquesta finestra - + The width of louvre elements L'amplària dels elements louvre - + The space between louvre elements L'espai entre elements louvre - + The number of the wire that defines the hole. If 0, the value will be calculated automatically El nombre de filferros que defineix el forat. Posant 0 es calcularà automàticament @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Components @@ -1717,12 +1742,12 @@ Crea l'eix - + Remove Elimina - + Add Afig @@ -1832,87 +1857,87 @@ Vista de - + Create Section Plane Crea un pla de secció - + Create Site Crea un lloc - + Create Structure Crea una estructura - + Create Wall Crea un mur - + Width Amplària - + Height Alçària - + Error: Invalid base object Error: L'objecte de base no és vàlid. - + This mesh is an invalid solid Aquesta malla no és un sòlid vàlid. - + Create Window Crea una finestra - + Edit Edita - + Create/update component Crea/actualitza el component - + Base 2D object Objecte base 2D - + Wires Filferros - + Create new component Crea un component nou - + Name Nom - + Type Tipus - + Thickness Gruix @@ -1922,7 +1947,7 @@ Error: no s'ha pogut determinar la codificació de caràcters - + file %s successfully created. el fitxer %s s'ha creat correctament. @@ -1972,32 +1997,32 @@ Crea escales - + Length Longitud - + Error: The base shape couldn't be extruded along this tool object Error: la forma base no s'ha pogut extrudir al llarg de l'objecte guia - + Couldn't compute a shape No s'ha pogut calcular la forma. - + Merge Wall Fusionar Mur - + Please select only wall objects Seleccioneu només objectes mur - + Merge Walls Fusiona els murs @@ -2012,7 +2037,7 @@ S'ha produït un error en calcular la forma de l'objecte - + Create Structural System Crea un sistema estructural @@ -2162,7 +2187,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Alçària (mm) - + Create Component Crea un component @@ -2177,17 +2202,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Els murs només es poden crear a partir d'objectes peça o malla - + Set text position Estableix la posició del text - + Category Categoria - + Key Clau @@ -2197,12 +2222,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Valor - + Unit Unitat - + Create IFC properties spreadsheet Crea el full de càlcul de propietats IFC @@ -2232,7 +2257,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Crea un full de tauler - + Facemaker returned an error El generador de cares ha retornat un error. @@ -2257,137 +2282,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Crea un connector - + Precast elements Elements prefabricats - + Slab type Tipus de llosa - + Chamfer Xamfrà - + Dent length Longitud de l'aleta - + Dent width Amplària de l'aleta - + Dent height Alçària de l'aleta - + Slab base Base de llosa - + Number of holes Nombre de forats - + Major diameter of holes Diàmetre major dels forats - + Minor diameter of holes Diàmetre menor dels forats - + Spacing between holes Espaiat entre forats - + Number of grooves Nombre de ranures - + Depth of grooves Profunditat de les ranures - + Height of grooves Alçària de les ranures - + Spacing between grooves Espaiat entre ranures - + Number of risers Nombre de contrapetges - + Length of down floor Longitud de la planta baixa - + Height of risers Alçària de les contrapetges - + Depth of treads Profunditat de les esteses - + Precast options Opcions de prefabricats - + Dents list Llista d'aletes - + Add dent Afig una aleta - + Remove dent Elimina l'aleta - + Slant Inclinació - + Level Nivell - + Rotation Rotació - + Offset Equidistancia (ofset) @@ -2412,58 +2437,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Guió - + There is no valid object in the selection. Site creation aborted. No hi ha cap objecte vàlid en la selecció. S'avorta la creació del lloc. - + Node Tools Eines de node - + Reset nodes Reinicialitza els nodes - + Edit nodes Edita els nodes - + Extend nodes Estén els nodes - + Extends the nodes of this element to reach the nodes of another element Estén els nodes d'aquest element per a arribar als nodes d'un altre element - + Connect nodes Connecta els nodes - + Connects nodes of this element with the nodes of another element Connecta els nodes d'aquest element amb els nodes d'un altre element - + Toggle all nodes Commuta tots els nodes - + Toggles all structural nodes of the document on/off Activa/desactiva en el document tots els nodes estructurals - + Intersection found. S'ha trobat una intersecció. @@ -2474,22 +2499,22 @@ Site creation aborted. Porta - + Hinge Frontissa - + Opening mode Mode d'obertura - + Get selected edge Obtín la vora seleccionada - + Press to retrieve the selected edge Premeu per a recuperar la vora seleccionada @@ -2519,17 +2544,17 @@ Site creation aborted. Capa nova - + Wall Presets... Murs predefinits... - + Hole wire Filferro de forat - + Pick selected Tria el seleccionat @@ -2614,17 +2639,17 @@ Site creation aborted. Aquest objecte no té cap cara - + Space boundaries Límits de l'espai - + Error: Unable to modify the base object of this wall Error: No es pot modificar l'objecte base d'aquest mur - + Window elements Elements de finestra @@ -2735,7 +2760,7 @@ Building creation aborted. Tot correcte. No s'ha trobat cap problema - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'objecte no té atribut IfcProperties. Cancel·la la creació de full de càlcul per a l'objecte: @@ -2918,47 +2943,47 @@ Floor creation aborted. No hi ha cap full de càlcul adjunt a aquesta llista - + Section plane settings Configuració del pla de secció - + Objects seen by this section plane: Objectes vists per aquest pla de secció: - + Section plane placement: Posicionament del pla de secció: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar - + Center Centre - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2969,77 +2994,77 @@ Qualsevol altre objecte serà eliminat de la selecció. Nota: Ho podeu canviar a les preferències. - + Choose another Structure object: Tria un altre objecte estructura: - + The chosen object is not a Structure L'objecte triat no és una Estructura - + The chosen object has no structural nodes L'objecte triat no té nodes estructurals - + One of these objects has more than 2 nodes Un d'aquests objectes té més de 2 nodes - + Unable to find a suitable intersection point No s'ha pogut trobar un punt d'intersecció adequat - + Intersection found. Intersecció trobada. - + The selected wall contains no subwall to merge El mur seleccionat no conté cap submur per a fusionar - + Cannot compute blocks for wall No es poden calcular els blocs per a la paret - + Choose a face on an existing object or select a preset Trieu una cara en un objecte existent o seleccioneu una preselecció - + Unable to create component No es pot crear el component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El nombre de fils que defineixen un forat en l'objecte. Un valor de zero automàticament adoptarà el cable més gran - + + default + per defecte - + If this is checked, the default Frame value of this window will be added to the value entered here Si està marcada, el valor per defecte del Marc d'aquesta finestra s'afegirà al valor introduït aquí - + If this is checked, the default Offset value of this window will be added to the value entered here Si està marcada, el valor per defecte del Desplaçament d'aquesta finestra s'afegirà al valor introduït aquí - + pycollada not found, collada support is disabled. no s'ha trobat el mòdul «pycollada», el suport per a «collada» està inhabilitat. @@ -3079,7 +3104,7 @@ Nota: Ho podeu canviar a les preferències. Error: la versió d'IfcOpenShell es massa antiga - + Successfully written Escrit correctament @@ -3089,7 +3114,7 @@ Nota: Ho podeu canviar a les preferències. S'ha trobat una forma que conté corbes, s'està triangulant - + Successfully imported S'ha importat correctament @@ -3105,45 +3130,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Afig el seleccionat - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Esquerra + + + + Right + Dreta + + + + Use sketches + Utilitzi esbossos + + + + Structure + Estructura + + + + Window + Finestra + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3356,21 +3496,16 @@ You can change that in the preferences. Checks the selected objects for problems Comprova si els objectes seleccionats presenten algun problema - - - Explore the contents of an IFC file - Explora el contingut d'un fitxer IFC - Arch_CloneComponent - + Clone component Clona el component - + Clones an object as an undefined architectural component Clona un objecte com a component arquitectònic no definit @@ -3391,12 +3526,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Crea un component arquitectònic no definit @@ -3430,12 +3565,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3529,23 +3664,15 @@ You can change that in the preferences. Els índexs de les cares que s'han d'amagar - - Arch_IfcExplorer - - - Ifc Explorer - Explorador Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea un full de càlcul IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea un full de càlcul per a emmagatzemar les propietats IFC d'un objecte. @@ -3574,12 +3701,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Fusiona els murs - + Merges the selected walls, if possible Fusiona els murs seleccionats, si és possible @@ -3785,12 +3912,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Pla de secció - + Creates a section plane object, including the selected objects Crea un pla de secció incloent-hi els objectes seleccionats @@ -3811,12 +3938,12 @@ You can change that in the preferences. Arch_Site - + Site Lloc - + Creates a site object including selected objects. Crea un lloc incloent-hi els objectes seleccionats @@ -3863,12 +3990,12 @@ You can change that in the preferences. Arch_Structure - + Structure Estructura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea una estructura a partir de zero o d'un objecte seleccionat (esbós, línia, cara o sòlid) @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Survey - + Survey Recollida de dades - + Starts survey Inicia la recollida de dades @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Commuta l'indicador de Brep IFC - + Force an object to be exported as Brep or not Imposa (o no) que un objecte s'exporte com a Brep @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Commuta els subcomponents - + Shows or hides the subcomponents of this object Mostra o amaga els subcomponents de l'objecte @@ -3928,12 +4055,12 @@ You can change that in the preferences. Arch_Window - + Window Finestra - + Creates a window object from a selected object (wire, rectangle or sketch) Crea una finestra a partir d'un objecte seleccionat (filferro, rectangle o esbós) @@ -4204,7 +4331,7 @@ You can change that in the preferences. Draft - + Writing camera position Escrivint la posició de la càmera @@ -4640,7 +4767,7 @@ You can change that in the preferences. Transparència: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. A alguns visualitzadors d'IFC no els agraden els objectes exportats com a extrusions. Utilitzeu aquesta funcionalitat per a imposar que tots els objectes s'exporten com a geometria BREP. @@ -4680,7 +4807,7 @@ You can change that in the preferences. Gruix - + Force export as Brep Imposa l'exportació com a Brep @@ -4710,7 +4837,7 @@ You can change that in the preferences. DAE - + Export options Opcions d'exportació @@ -4920,22 +5047,22 @@ You can change that in the preferences. Permet quadrilàters - + Use triangulation options set in the DAE options page Utilitza les opcions de triangulació establides en la pàgina d'opcions del DAE - + Use DAE triangulation options Utililtza les opcions de triangulació DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Les formes corbes que no es poden representar com a corbes en un IFC es descomponen en facetes planes. Si està marcada, es realitzaran alguns càlculs addicionals per a unir les facetes coplanars. - + Join coplanar facets when triangulating Uneix facetes coplanars durant la triangulació @@ -4975,12 +5102,12 @@ You can change that in the preferences. Importa les propietats IFC en un full de càlcul - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Quan s'exporten objectes sense UID, l'UID generat s'emmagatzemarà dins de l'objecte FreeCAD per a reutilitzar-lo la pròxima vegada que s'exporte l'objecte, la qual cosa dóna menors diferències entre les versions - + Store IFC universal ID in FreeCAD objects Emmagatzema l'ID universal d'IFC dins de l'objecte FreeCAD @@ -5050,17 +5177,17 @@ You can change that in the preferences. Separa els murs multicapa - + Warning, experimental feature! Atenció! És una funcionalitat experimental. - + Use IfcOpenShell serializer if available Utilitzeu el serialitzador IfcOpenShell, si està disponible - + Export 2D objects as IfcAnnotations Exporta objectes 2D com a objects as a anotacions Ifc @@ -5085,12 +5212,12 @@ You can change that in the preferences. Ajusta la vista durant la importació - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Si està marcada, totes les propietats d'objecte del FreeCAD s'emmagatzemaran dins dels objectes exportats, i això permet tornar a crear un model paramètric complet en tornar a importar. - + Export full FreeCAD parametric model Exporta un model paramètric complet de FreeCAD @@ -5145,22 +5272,22 @@ You can change that in the preferences. Llista d'exclusió: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reutilitza entitats similars - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Desactiva IfcRectangleProfileDef @@ -5225,14 +5352,49 @@ You can change that in the preferences. Color de línia - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.qm b/src/Mod/Arch/Resources/translations/Arch_cs.qm index 3c9055ae53..732f2eb32d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_cs.qm and b/src/Mod/Arch/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index b98d336d04..926d5c8cde 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -44,12 +44,12 @@ Objekt této komponenty je klonován - + Other shapes that are appended to this object Další tvary přidané k tomuto objektu - + Other shapes that are subtracted from this object Další tvary odebrané z objektu @@ -79,7 +79,7 @@ Oblast všech svislých ploch tohoto objektu - + The area of the projection of this object onto the XY plane Oblasti průmětu tohoto objektu na rovinu XY @@ -114,7 +114,7 @@ Vypočtená půdorysná plocha - + The placement of this object Umístění tohoto objektu @@ -144,12 +144,12 @@ Rotace profilu okolo osy vysunutí - + The length of this element, if not based on a profile Délka tohoto prvku, není-li založena na profilu - + The width of this element, if not based on a profile Šířka tohoto prvku, není-li založena na profilu @@ -194,22 +194,22 @@ Oblast tohoto panelu - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object Propojený objekt - + The line width of the rendered objects Tloušťka čar vykreslených objektů @@ -349,7 +349,7 @@ Výška tohoto prvku - + The structural nodes of this element Konstrukční uzly tohoto prvku @@ -614,132 +614,132 @@ Tabulka pro výstup výsledků - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Zobrazit řez v 3D pohledu - + The rendering mode to use Režim vykreslování - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object Velikost textů uvnitř tohoto objektu - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site Základní profil tohoto staveniště - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Úhel mezi severem a severním směrem v tomto dokumentu - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Zobrazit/Nezobrazit osvícení sluncem - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - Zóna jehož je tento prostor součástí - - - The number of people who typically occupy this space Počet lidí, kteří většinou tento prostor obývají - + The electric power needed to light this space in Watts Elektrický příkon potřebný k osvětlení tohoto prostoru ve Wattech - + The electric power needed by the equipment of this space in Watts Elektrický příkon vybavení tohoto prostoru, ve Wattech - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space Typ klimatizace prostoru - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Text, který se má zobrazit. Použij $area, $label, $tag, $floor, $walls, $ceiling pro vložení příslušných údajů - + The name of the font Název fontu - + The color of the area text The color of the area text - + The size of the text font Velikost fontu - + The size of the first line of text Velikost prvního řádku textu - + The space between the lines of text Mezery mezi řádky textu - + The position of the text. Leave (0,0,0) for automatic position Pozice textu. Použij (0,0,0) pro automatickou pozici - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponenty @@ -1717,12 +1742,12 @@ Vytvořit osu - + Remove Odstranit - + Add Přidat @@ -1832,87 +1857,87 @@ Pohled na - + Create Section Plane Vytvoření roviny řezu - + Create Site Vytvořit parcelu - + Create Structure Vytvořit strukturu - + Create Wall Vytvořit zeď - + Width Šířka - + Height Výška - + Error: Invalid base object Chyba: Neplatný základní objekt - + This mesh is an invalid solid Tato síť netvoří platné těleso - + Create Window Vytvořit okno - + Edit Upravit - + Create/update component Vytvořit/aktualizovat díl - + Base 2D object Základní 2D objekt - + Wires Dráty - + Create new component Vytvořit nový díl - + Name Jméno - + Type Typ - + Thickness Tloušťka @@ -1922,7 +1947,7 @@ Chyba: Nelze určit kódování znaků - + file %s successfully created. soubor %s byl úspěšně vytvořen. @@ -1972,32 +1997,32 @@ Vytvořit schody - + Length Délka - + Error: The base shape couldn't be extruded along this tool object Chyba: Základní tvar nemůže být vysunut podél tohoto objektu - + Couldn't compute a shape Nemohu vyřešit plochu - + Merge Wall Sloučit stěnu - + Please select only wall objects Prosím vyberte pouze objekty stěny - + Merge Walls Sloučit stěny @@ -2012,7 +2037,7 @@ Chyba při výpočtu tvaru tohoto objektu - + Create Structural System Vytvořit konstrukční systém @@ -2172,7 +2197,7 @@ Je-li Horizontální rozměr = 0, pak je počátán Horizontální rozměr, tak Výška (mm) - + Create Component Vytvořit komponentu @@ -2187,17 +2212,17 @@ Je-li Horizontální rozměr = 0, pak je počátán Horizontální rozměr, tak Zdi mohou být založeny jen na objektech součásti nebo sítě - + Set text position Nastavit pozici textu - + Category Kategorie - + Key Klíč @@ -2207,12 +2232,12 @@ Je-li Horizontální rozměr = 0, pak je počátán Horizontální rozměr, tak Hodnota - + Unit Jednotka - + Create IFC properties spreadsheet Vytvořit tabulku IFC vlastností @@ -2242,7 +2267,7 @@ Je-li Horizontální rozměr = 0, pak je počátán Horizontální rozměr, tak Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ Je-li Horizontální rozměr = 0, pak je počátán Horizontální rozměr, tak Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Sražení - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Odstup @@ -2422,59 +2447,59 @@ Je-li Horizontální rozměr = 0, pak je počátán Horizontální rozměr, tak Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Dveře - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Střed - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Vlevo + + + + Right + Vpravo + + + + Use sketches + Use sketches + + + + Structure + Struktura + + + + Window + Okno + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Zkontroluje vybrané objekty na problémy - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Komponenta - + Creates an undefined architectural component Vytvoří nedefinovanou architektonickou komponentu @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc prohlížeč - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Vytvořit tabulku IFC... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Sloučit stěny - + Merges the selected walls, if possible Sloučí vybrané zdi @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Rovina řezu - + Creates a section plane object, including the selected objects Vytvoří objekt roviny řezu, který zahrnuje vybrané objekty @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Parcela - + Creates a site object including selected objects. Vytvoří objekt parcely zahrnující vybrané objekty. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Vytvoří konstrukční objekt kompoletně nebo z vybraného objektu (náčrt, drát, povrch nebo těleso) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Prohlížení - + Starts survey Začne prohlížení @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Přepnout IFC Brep znak - + Force an object to be exported as Brep or not Vynutit nebo ne nevynutit export objektu jako Brep @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Okno - + Creates a window object from a selected object (wire, rectangle or sketch) Vytvoří objekt okna z vybraného objektu (drát obdélník nebo náčrt) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Zápis polohy kamery @@ -4653,7 +4780,7 @@ You can change that in the preferences. Průhlednost: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Některé IFC prohlížeče nemají rády objekty exportované jako extruze. Použijte tohoto k vynucenému exportu všech objektů jako BREP geometrie. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Tloušťka - + Force export as Brep Vynutit export jako Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Možnosti exportu @@ -4933,22 +5060,22 @@ You can change that in the preferences. Povolit čtyřúhelníky - + Use triangulation options set in the DAE options page Použít možnosti triangulace nastavení na straně nastavení DAE - + Use DAE triangulation options Použít triangulaci nastavení DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Zakřivené tvary nemohou být reprezentovány, protože zakřivení jsou v IFC složeny z rovných ploch. Je-li toto zaškrtnuto, ke spojení koplanárních (ležicí v jedné rovině) ploch budou použitý dodatečné výpočty. - + Join coplanar facets when triangulating Sloučit koplanární plochy při triangulaci @@ -4988,12 +5115,12 @@ You can change that in the preferences. Importovat Ifc vlastnosti do tabulky - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Barva čáry - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index 32549d965d..a335a34ead 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 0f2c88cbe5..2b5ee32dcf 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -44,12 +44,12 @@ Das Objekt wird von dieser Komponente geklont - + Other shapes that are appended to this object Andere Formen, die an dieses Objekt angehängt werden - + Other shapes that are subtracted from this object Andere Formen, die von diesem Objekt abgezogen werden @@ -79,7 +79,7 @@ Die Gesamtfläche aller vertikalen Flächen dieses Objekts - + The area of the projection of this object onto the XY plane Die Fläche der Projektion des Objekts auf der XY-Ebene @@ -114,7 +114,7 @@ Die berechnete Bodenfläche dieses Bodens - + The placement of this object Die Platzierung dieses Objekts @@ -144,12 +144,12 @@ Die Drehung des Profils um seine Extrusionsachse - + The length of this element, if not based on a profile Die Länge dieses Elements, wenn nicht auf einem Profil basierend - + The width of this element, if not based on a profile Die Breite dieses Elements, wenn nicht auf einem Profil basierend @@ -194,22 +194,22 @@ Der Bereich dieses Panels - + The facemaker type to use to build the profile of this object Der zu verwendende Facemaker-Typ, um das Profil dieses Objekts zu bauen - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Die normalisierte Extrusionsrichtung dieses Objekts (behalte (0,0,0) für automatische Normale) - + The linked object Das verknüpfte Objekt - + The line width of the rendered objects Die Linienbreite der gerenderten Objekte @@ -349,7 +349,7 @@ Die Höhe dieses Elements - + The structural nodes of this element Die Strukturknoten dieses Elements @@ -614,132 +614,132 @@ Die Kalkulationstabelle, um die Ergebnisse zu drucken - + If false, non-solids will be cut too, with possible wrong results. Wenn falsch, werden nicht-Feststoffe auch zugeschnitten, mit möglichen falschen Ergebnissen. - + The display length of this section plane Die Anzeigelänge dieser Sektionsebene - + The display height of this section plane Die Anzeigehöhe dieser Sektionsebene - + The size of the arrows of this section plane Die Größe der Pfeile dieser Sektionsebene - + Show the cut in the 3D view Zeigen Sie den Schnitt in der 3D-Ansicht - + The rendering mode to use Der zu verwendende Rendering-Modus - + If cut geometry is shown or not Ob die Schnittgeometrie angezeigt wird oder nicht - + If cut geometry is filled or not Ob die schnitt Geometrie gefüllt ist oder nicht - + The size of the texts inside this object Die Textgröße in diesem Objekt - + If checked, source objects are displayed regardless of being visible in the 3D model Wenn aktiviert, werden Quellobjekte angezeigt, unabhängig davon, ob sie im 3D-Modell sichtbar sind - + The base terrain of this site Die Basis Gelände dieser Seite - + The postal or zip code of this site Die Postleitzahl oder die Postleitzahl dieser Seite - + The city of this site Die Stadt dieser Seite - + The country of this site Das Land dieser Seite - + The latitude of this site Der Breitengrad dieses Grundstücks - + Angle between the true North and the North direction in this document Winkel zwischen der wahren Nord und Nordrichtung in diesem Dokument - + The elevation of level 0 of this site Die Höhe des Levels 0 dieser Seite - + The perimeter length of this terrain Die Umfangslänge dieses Geländes - + The volume of earth to be added to this terrain Das Volumen der Erde, das diesem Gelände hinzugefügt werden soll - + The volume of earth to be removed from this terrain Das Volumen der Erde das von diesem Gelände entfernt werden soll - + An extrusion vector to use when performing boolean operations Ein Extrusionsvektor, der bei der Durchführung von Booleschen Operationen verwendet werden soll - + Remove splitters from the resulting shape Entfernen von Spaltern aus der resultierenden Form - + Show solar diagram or not Solar-Diagramm anzeigen oder nicht - + The scale of the solar diagram Die Skala des Solardiagramms - + The position of the solar diagram Die Position des Solardiagramms - + The color of the solar diagram Die Farbe des Solardiagramms @@ -785,81 +785,76 @@ - A zone this space is part of - Eine Zone dieser Raum ein Teil von ist - - - The number of people who typically occupy this space Die Anzahl der Personen, die diesen Raum typischerweise besetzen - + The electric power needed to light this space in Watts Die notwendige elektrische Energie in Watt, um diesen Raum zu beleuchten - + The electric power needed by the equipment of this space in Watts Die elektrische Leistung in Watt, die dieses Gerät benötigt - + If True, Equipment Power will be automatically filled by the equipment included in this space Wenn True, wird die Ausrüstungsenergie, automatisch durch die enthaltene Ausrüstung in den Raum gefüllt - + The type of air conditioning of this space Die Art der Klimaanlage dieses Raumes - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Der zu zeigende Text. Verwenden Sie $area, $label, $tag, $floor, $walls, $ceiling, um die entsprechenden Daten einzufügen - + The name of the font Der Name der Schriftart - + The color of the area text Die Farbe des Bereichstextes - + The size of the text font Die Größe der Textschriftart - + The size of the first line of text Die Größe der ersten Zeile des Textes - + The space between the lines of text Der Abstand zwischen den Textzeilen - + The position of the text. Leave (0,0,0) for automatic position Die Position des Textes. Belassen von (0,0,0) für automatische Position - + The justification of the text Die Begründung des Textes - + The number of decimals to use for calculated texts Die Anzahl der Dezimalstellen, die für berechnete Texte verwendet werden sollen - + Show the unit suffix Einheitensuffix anzeigen @@ -939,102 +934,102 @@ Der Versatz zwischen der Grenze der Treppe und der Struktur - + An optional extrusion path for this element Ein optionaler Extrusionspfad für dieses Element - + The height or extrusion depth of this element. Keep 0 for automatic Die Höhe oder Extrusionstiefe dieses Elements. Behalten Sie 0 automatisch - + A description of the standard profile this element is based upon Eine Beschreibung des Standardprofils dieses Elements basiert darauf - + Offset distance between the centerline and the nodes line Versatzabstand zwischen der Mittellinie und der Knotenlinie - + If the nodes are visible or not Ob die Knoten sichtbar sind oder nicht - + The width of the nodes line Die Breite der Knotenlinie - + The size of the node points Die Größe der Knotenpunkte - + The color of the nodes line Die Farbe der Knotenlinie - + The type of structural node Die Art des Strukturknotens - + Axes systems this structure is built on Achsen-Systeme auf dem diese Struktur aufgebaut ist - + The element numbers to exclude when this structure is based on axes Die Elementanzahl, die ausgeschlossen werden sollen, wenn diese Struktur auf Achsen basiert - + If true the element are aligned with axes Wenn wahr, wird das Element an Achsen ausgerichtet - + The length of this wall. Not used if this wall is based on an underlying object Die Länge dieser Mauer. Nicht verwendet, wenn diese Wand auf einem zugrunde liegenden Objekt basiert - + The width of this wall. Not used if this wall is based on a face Die Breite dieser Mauer. Nicht verwendet, wenn diese Wand auf einer Fläche basiert - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Die Höhe dieser Mauer. 0 für automatisch. Nicht verwendet, wenn diese Wand auf einem Solid basiert - + The alignment of this wall on its base object, if applicable Die Ausrichtung dieser Wand auf ihrem Grundobjekt, falls zutreffend - + The face number of the base object used to build this wall Die Flächenanzahl des Basisobjekts, das verwendet wurde, um diese Wand zu bauen - + The offset between this wall and its baseline (only for left and right alignments) Der Versatz zwischen dieser Wand und ihrer Grundlinie (nur für linke und rechte Ausrichtung) - + The normal direction of this window Die normale Ausrichtung dieses Fensters - + The area of this window Der Bereich dieses Fensters @@ -1049,7 +1044,7 @@ Eine optionale zusätzliche Platzierung, um das Profil vor dem Extrudieren hinzuzufügen - + Opens the subcomponents that have a hinge defined Öffnet die Unterkomponenten, die ein Scharnier definiert haben @@ -1089,12 +1084,12 @@ Die Liste der Schichtdicken - + The line color of the projected objects Linienfarbe projizierter Objekte - + The color of the cut faces (if turned on) Die Farbe der Schnittflächen (sofern aktiviert) @@ -1104,7 +1099,7 @@ Die Überlappung der Reihe oberhalb der Unterseite des Profils - + The number of the wire that defines the hole. A value of 0 means automatic Die Anzahl der Kanten, die das Loch definieren. Der Wert 0 bedeutet automatisch @@ -1194,7 +1189,7 @@ Die benutzerdefinierten Abstand der Bewehrung - + Shape of rebar Form von Bewehrung @@ -1204,17 +1199,17 @@ Drehen Sie die Richtungdes Daches, wenn Sie in die verkehrte Richtung gehen - + Shows plan opening symbols if available Zeigt Zeichnungssymbole, falls verfügbar - + Show elevation opening symbols if available Zeige Elevationsöffnung, falls verfügbar - + The objects that host this window Die Objekte, die dieses Fenster teilen @@ -1269,12 +1264,12 @@ Die Ebene des (0,0,0) Punktes dieser Ebene - + The shape of this object Die Form dieses Objekts - + The line width of this object Die Linienbreite des Objekts @@ -1414,47 +1409,47 @@ Bei wahr werden die Farben der verknüpften Datei automatisch aktualisiert - + The objects that must be considered by this section plane. Empty means the whole document. Die Objekte, die von dieser Schnittebene berücksichtigt werden müssen. Leer bedeutet das ganze Dokument. - + The transparency of this object Die Transparenz dieses Objekts - + The color of this object Die Farbe dieses Objekts - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Die Entfernung zwischen der Schnitt-Ebene und der tatsächlichen Anzeige-Ebene (nutze einen sehr kleinen Wert ungleich 0) - + The street and house number of this site, with postal box or apartment number if needed Die Straße und Hausnummer dieses Standorts, falls erforderlich, mit Postfach- oder Wohnungsnummer - + The region, province or county of this site Die Region, Provinz oder Verwaltungsbezirk dieses Ortes - + A url that shows this site in a mapping website Eine url für diese Seite in der Karten-Webseite - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Ein optionaler Abstand zwischen dem (0,0,0) Modellursprung und dem Punkt, der durch die Geokoordinaten angegeben ist - + Specifies if this space is internal or external Gibt an, ob dieser Raum intern oder extern ist @@ -1504,200 +1499,230 @@ Die "linke Aussenlinie" aller Segmente der Treppe - + Enable this to make the wall generate blocks Aktivieren um aus der Wand Blöcke zu erstellen - + The length of each block Die Länge der einzelnen Blöcke - + The height of each block Die Höhe der einzelnen Blöcke - + The horizontal offset of the first line of blocks Der horizontale Offset der ersten Blockreihe - + The horizontal offset of the second line of blocks Der horizontale Offset der zweiten Blockreihe - + The size of the joints between each block Die Größe der Fugen zwischen einzelnen Blöcken - + The number of entire blocks Die Gesamtanzahl der Blöcke - + The number of broken blocks Die Anzahl der gestrichelten Blöcke - + The components of this window Die (Bau)teile dieses Fensters - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Die Tiefe des Loches, welches dieses Fenster in seinem Wirtsobjekt macht. Sollte es 0 sein, wird der Wert automatisch kalkuliert. - + An optional object that defines a volume to be subtracted from hosts of this window Ein optionales Objekt, das Ein Volumen definiert, das vom Host dieses Fensters subtrahiert wird - + The width of this window Die Breite dieses Fensters - + The height of this window Die Höhe dieses Fensters - + The preset number this window is based on Die Voreinstellungsnummer, auf der dieses Fenster basiert - + The frame size of this window Die Rahmengröße dieses Fensters - + The offset size of this window Der Versatz dieses Fensters - + The width of louvre elements Die Breite der Gitterelemente - + The space between louvre elements Der Abstand zwischen den Gitterelementen - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Die Anzahl der Kanten, die das Loch definieren. Der Wert 0 bedeutet automatisch Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Bestimmt, ob das Verschieben dieses Objekts, stattdessen seine Basis bewegt A single section of the fence - A single section of the fence + Ein einzelner Abschnitt des Zauns A single fence post - A single fence post + Ein einzelner Zaun-Pfosten The Path the fence should follow - The Path the fence should follow + Der Pfad, dem der Zaun folgen soll The number of sections the fence is built of - The number of sections the fence is built of + Die Anzahl der Abschnitte aus denen der Zaun besteht The number of posts used to build the fence - The number of posts used to build the fence + Die Anzahl der Pfosten, die für den Zaun verwendet werden - + The type of this object - The type of this object + Der Typ dieses Objekts IFC data - IFC data + IFC-Daten IFC properties of this object - IFC properties of this object + IFC-Eigenschaften dieses Objekts - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Beschreibung der IFC-Attribute sind noch nicht implementiert + + + + If True, resulting views will be clipped to the section plane area. + Wenn wahr, werden die entstehenden Ansichten durch den Bereich der Schnittebene begrenzt. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Wenn wahr, wird die Farbe des Objektmaterials verwendet, um Schnittflächen zu füllen. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Wenn 'True North' eingestellt ist, wird die Geometrie so gedreht, dass sie dem absoluten Norden entspricht - + + Show compass or not + Kompass anzeigen oder nicht + + + + The rotation of the Compass relative to the Site + Relative Drehung des Kompasses + + + + The position of the Compass relative to the Site placement + Relative Positionierung des Kompasses + + + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation The thickness of the risers - The thickness of the risers + Die Dicke der Setzstufen The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + Die "rechte Aussenlinie" aller Segmente der Treppe + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Komponenten @@ -1717,12 +1742,12 @@ Achse erzeugen - + Remove Entfernen - + Add Hinzufügen @@ -1832,87 +1857,87 @@ Ansicht von - + Create Section Plane Schnittebene erzeugen - + Create Site Grundstück erstellen - + Create Structure Struktur erzeugen - + Create Wall Wand erzeugen - + Width Breite - + Height Höhe - + Error: Invalid base object Fehler: Ungültiges Basisobjekt - + This mesh is an invalid solid Dieses Polygonnetz ist ein ungültiger Volumenkörper - + Create Window Fenster erzeugen - + Edit Bearbeiten - + Create/update component Erstelle / aktualisiere Komponente - + Base 2D object 2D Basisobjekt - + Wires Kantenzüge - + Create new component Neue Komponente erstellen - + Name Name - + Type Typ - + Thickness Dicke @@ -1922,7 +1947,7 @@ Fehler: Konnte Zeichencodierung nicht bestimmen - + file %s successfully created. Datei %s erfolgreich erzeugt. @@ -1972,32 +1997,32 @@ Treppe erstellen - + Length Länge - + Error: The base shape couldn't be extruded along this tool object Fehler: Die Basisform konnte nicht entlang des Hilfsobjektes extrudiert werden - + Couldn't compute a shape Form konnte nicht berechnet werden - + Merge Wall Wand zusammenfügen - + Please select only wall objects Bitte wählen Sie nur Wand Objekte - + Merge Walls Wände zusammenfügen @@ -2012,7 +2037,7 @@ Fehler, die Form des Objektes konnte nicht ermittelt werden - + Create Structural System Erstelle ein Strukturelles System @@ -2172,7 +2197,7 @@ Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil Höhe (mm) - + Create Component Komponente erstellen @@ -2187,17 +2212,17 @@ Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil Wände konnen nur auf Volumenkörper oder Netz-Körper aufbauen - + Set text position Textposition festlegen - + Category Kategorie - + Key Schlüssel @@ -2207,12 +2232,12 @@ Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil Wert - + Unit Einheit - + Create IFC properties spreadsheet Erstelle Kalkulationstabelle für IFC-Eigenschaften @@ -2242,7 +2267,7 @@ Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil Panel Sheet Erstellen - + Facemaker returned an error Facemaker hat einen Fehler zurückgegeben @@ -2267,137 +2292,137 @@ Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil Verbinder erstellen - + Precast elements Vorgefertigte Elemente - + Slab type Platten Art - + Chamfer Fase - + Dent length Dellen Länge - + Dent width Dellen Breite - + Dent height Dellen Höhe - + Slab base Brammenbasis - + Number of holes Anzahl der Löcher - + Major diameter of holes Hauptdurchmesser von Löchern - + Minor diameter of holes Kerndurchmesser der Löcher - + Spacing between holes Abstand zwischen den Löchern - + Number of grooves Anzahl der Rillen - + Depth of grooves Tiefe der Rillen - + Height of grooves Höhe der Rillen - + Spacing between grooves Abstand zwischen den Rillen - + Number of risers Anzahl der Steigungen - + Length of down floor Länge des Boden unten - + Height of risers Höhe der Steigungen - + Depth of treads Tiefe der Stufen - + Precast options Vorgefertigte Optionen - + Dents list Beulen Liste - + Add dent Delle hinzufügen - + Remove dent Delle entfernen - + Slant Schräge - + Level Ebene - + Rotation Drehung - + Offset Versetzen @@ -2422,58 +2447,58 @@ Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil Zeitplan - + There is no valid object in the selection. Site creation aborted. Es gibt kein gültiges Objekt in der Auswahl. Seiten-Erstellung abgebrochen. - + Node Tools Knotenwerkzeuge - + Reset nodes Knoten zurücksetzen - + Edit nodes Knoten bearbeiten - + Extend nodes Knoten erweitern - + Extends the nodes of this element to reach the nodes of another element Verlängert die Knoten dieses Elements, um die Knoten eines anderen Elements zu erreichen - + Connect nodes Knoten verbinden - + Connects nodes of this element with the nodes of another element Verbindet Knoten dieses Elements mit den Knoten eines anderen Elements - + Toggle all nodes Alle Knoten umschalten - + Toggles all structural nodes of the document on/off Schaltet alle Strukturknoten des Dokuments ein / aus - + Intersection found. Schnittpunkt gefunden. @@ -2485,22 +2510,22 @@ Site creation aborted. Tür - + Hinge Gelenk - + Opening mode Öffnungsmodus - + Get selected edge Ausgewählte Kante erhalten - + Press to retrieve the selected edge Drücken, um die ausgewählte Kante zu erhalten @@ -2530,17 +2555,17 @@ Site creation aborted. Neue Ebene - + Wall Presets... Voreinstellung Wand... - + Hole wire Lochkantenzug - + Pick selected Ausgewählte wählen @@ -2625,17 +2650,17 @@ Site creation aborted. Dieses Objekt hat keine Fläche - + Space boundaries Flächenbegrenzungen - + Error: Unable to modify the base object of this wall Error: Der Grundriss dieser Wand konnte nicht geändert werden - + Window elements Fensterelemente @@ -2746,7 +2771,7 @@ Building creation aborted. Alles gut! Keine Probleme gefunden - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Das Objekt weist kein IFC-Eigenschaften Attribut auf. Die Erstellung einer Kalulationstabelle für dieses Objekt abbrechen: @@ -2811,10 +2836,7 @@ Building creation aborted. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Sie können alles außer die folgenden Objekte unterbringen: Standort, Gebäude und Geschoss. Das Geschossobjekt akzeptiert kein Standort-, Gebäude oder Geschossobjekte. Standort-, Gebäude- und Geschossobjekte werden aus der Auswahl entfernt. Sie können das in den Einstellungen ändern. @@ -2928,47 +2950,47 @@ Floor creation aborted. Keine Tabelle zu diesem Zeitplan angefügt - + Section plane settings Einstellungen Schnittebene - + Objects seen by this section plane: Objekte, die von dieser Schnittebene gesehen werden: - + Section plane placement: Platzierung der Schnittebene: - + Rotate X Drehen X - + Rotate Y Drehen Y - + Rotate Z Drehen Z - + Resize Größe ändern - + Center Mittelpunkt - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2977,77 +2999,77 @@ Note: You can change that in the preferences. Der Standort darf kein anderes Objekt akzeptieren als Gebäude. Andere Objekte werden aus der Auswahl entfernt. Sie können das in den Einstellungen ändern. - + Choose another Structure object: Wählen Sie ein anderes Strukturobjekt aus: - + The chosen object is not a Structure Das ausgewählte Objekt ist keine Struktur - + The chosen object has no structural nodes Das ausgewählte Objekt hat keine Strukturknoten - + One of these objects has more than 2 nodes Eines dieser Objekte hat mehr als 2 Knoten - + Unable to find a suitable intersection point Ein geeigneter Schnittpunkt kann nicht gefunden werden - + Intersection found. Schnittpunkt gefunden. - + The selected wall contains no subwall to merge Die ausgewählte Wand enthält keine darunterliegende Wand zum Zusammenführen - + Cannot compute blocks for wall Blöcke für die Wand können nicht berechnet werden - + Choose a face on an existing object or select a preset Wählen Sie die Oberfläche eines vorhandenen Objekts oder wählen Sie eine Vorgabe - + Unable to create component Konnte Komponente nicht erstellen - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Die Nummer des Kantenzuges der das Loch im Host-Objekt definiert. Der Wert Null wählt automatisch den größten Kantenzug aus - + + default + Standard - + If this is checked, the default Frame value of this window will be added to the value entered here Wenn diese Option aktiviert ist, wird der Standard Rahmenwert dieses Fensters zu dem hier eingegebenen Wert hinzugefügt - + If this is checked, the default Offset value of this window will be added to the value entered here Wenn diese Option aktiviert ist, wird der Standard Versatzwert dieses Fensters zu dem hier eingegebenen Wert addiert - + pycollada not found, collada support is disabled. pycollada nicht gefunden, die Collada-Unterstützung wurde deaktiviert. @@ -3087,7 +3109,7 @@ Der Standort darf kein anderes Objekt akzeptieren als Gebäude. Andere Objekte w Fehler: Ihre IfcOpenShell-Version ist veraltet - + Successfully written Erfolgreich geschrieben @@ -3097,7 +3119,7 @@ Der Standort darf kein anderes Objekt akzeptieren als Gebäude. Andere Objekte w Form mit Kurven gefunden, Trianguliere (annäherung mittels Geraden) - + Successfully imported Erfolgreich importiert @@ -3107,50 +3129,165 @@ Der Standort darf kein anderes Objekt akzeptieren als Gebäude. Andere Objekte w Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Sie können alles außer Grundstücks- und Gebäudeobjekte in einem Gebäude-Objekt platzieren. +Gebäude-Objekt ist nicht erlaubt, Grundstücks- und Gebäudeobjekte zu akzeptieren. +Grundstücks- und Gebäudeobjekte werden aus der Auswahl entfernt. +Sie können das in den Einstellungen ändern. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Markierte Objekte aus der oben genannten Liste entfernen - + Add selected Auswahl hinzufügen - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Ausgewählte Objekte in den Bereich dieser Schnittebene hinzufügen + + + + Rotates the plane along the X axis + Rotiert die Ebene entlang X-Achse - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Rotiert die Ebene entlang Y-Achse - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Rotiert die Ebene entlang Z-Achse - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Ändert die Ausdehnung der Ebene, um sie den Objekten in der oben genannten Liste anzupassen - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Verschiebt die Ebene, in die Mitte der in der oben genannten Liste befindlichen Objekte - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Erster Punkt des Trägers + + + + Base point of column + Säulenbasispunkt + + + + Next point + Nächster Punkt + + + + Structure options + Strukturoptionen + + + + Drawing mode + Zeichnungsmodus + + + + Beam + Träger + + + + Column + Säule + + + + Preset + Voreinstellung + + + + Switch L/H + Tausche L und H + + + + Switch L/W + Tausche L und B + + + + Con&tinue + Wiederholen + + + + First point of wall + Erster Punkt der Wand + + + + Wall options + Wandoptionen + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Diese Liste zeigt alle Multi-Material-Objekte dieses Dokuments. Erstellen Sie solche, um Wandtypen zu definieren. + + + + Alignment + Ausrichtung + + + + Left + Links + + + + Right + Rechts + + + + Use sketches + Benutze Skizzen + + + + Structure + Struktur + + + + Window + Fenster + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3364,21 +3501,16 @@ You can change that in the preferences. Checks the selected objects for problems Überprüft die ausgewählten Objekte auf Probleme - - - Explore the contents of an IFC file - Den Inhalt von IFC Dateien untersuchen - Arch_CloneComponent - + Clone component Clone Komponente - + Clones an object as an undefined architectural component Klont ein Objekt als undefinierte architektonische Komponente @@ -3399,12 +3531,12 @@ You can change that in the preferences. Arch_Component - + Component Komponente - + Creates an undefined architectural component Erstellt eine undefinierte Architekturkomponente @@ -3438,14 +3570,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Zaun - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Erstellt ein Zaun-Objekt aus einem ausgewählten Abschnitt, Pfosten und Pfad @@ -3537,23 +3669,15 @@ You can change that in the preferences. Den Inhalt der Planfläche verbergen - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Erstelle IFC Kalulationstabelle... - + Creates a spreadsheet to store IFC properties of an object. Erstellt eine Kalulationstabelle um IFC-Eigenschaften eines Objekts zu speichern. @@ -3582,12 +3706,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Wände zusammenfügen - + Merges the selected walls, if possible Führt die ausgewählten Wände zusammen, wenn möglich @@ -3793,12 +3917,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Schnittebene - + Creates a section plane object, including the selected objects Erstellt eine Schnittebene, einschließlich der ausgewählten Objekte @@ -3819,12 +3943,12 @@ You can change that in the preferences. Arch_Site - + Site Grundstück - + Creates a site object including selected objects. Erzeugt ein Grundstücksobjekt inklusive der ausgewählten Objekte. @@ -3871,12 +3995,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Erzeugt ein Strukturobjekt von Grund auf neu oder von einem ausgewählten Objekt (Skizze, Kantenzug, Oberfläche oder Volumenkörper) @@ -3884,12 +4008,12 @@ You can change that in the preferences. Arch_Survey - + Survey Messen - + Starts survey Messen starten @@ -3897,12 +4021,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep Kennzeichen Umschalten - + Force an object to be exported as Brep or not Erzwingen den Exports eines Objekts als Brep (oder nicht) @@ -3910,12 +4034,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Unterkomponenten umschalten - + Shows or hides the subcomponents of this object Zeigt oder verbirgt die Unterkomponenten dieses Objekts @@ -3936,12 +4060,12 @@ You can change that in the preferences. Arch_Window - + Window Fenster - + Creates a window object from a selected object (wire, rectangle or sketch) Erstellt ein Fensterobjekt von einem ausgewählten Objekt (Kantenzug, Rechteck oder Skizze) @@ -4212,7 +4336,7 @@ You can change that in the preferences. Draft - + Writing camera position Kameraposition schreiben @@ -4648,7 +4772,7 @@ You can change that in the preferences. Transparenz: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Einige IFC-Viewer haben Probleme mit Objekten die als Extrusionen exportiert werden. Mit dieser Einstellung werden alle Objekte als BREP-Geometrie exportiert. @@ -4688,7 +4812,7 @@ You can change that in the preferences. Dicke - + Force export as Brep Export als Brep erzwingen @@ -4718,7 +4842,7 @@ You can change that in the preferences. DAE - + Export options Export Einstellungen @@ -4928,22 +5052,22 @@ You can change that in the preferences. Nutze Vierecke - + Use triangulation options set in the DAE options page Verwende triangulationsoptionen des DAE-Optionen-Tabs - + Use DAE triangulation options Verwende DAE triangulationsoptionen - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Geschwungene Formen, die in IFC nicht als Wölbung dargestellt werden können, werden als ebene Facetten zerlegt. Wenn diese Option aktiviert ist, werden zusätzliche Berechnungen durchgeführt um koplanare Facetten zu erzeugen. - + Join coplanar facets when triangulating Vereinige planparallele Netzelemente während Netzgenerierung @@ -4983,13 +5107,13 @@ You can change that in the preferences. Importiere IFC-Eigenschaften in eine Kalkulationstabelle - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Beim Export von Objekten ohne UID wird die generierte UID im FreeCAD-Objekt zur Wiederverwendung für den nächsten export dieses Objekt gespeichert, was zu kleineren Diffs zwischen den Versionen führt - + Store IFC universal ID in FreeCAD objects Speichern der IFC Universal ID in FreeCAD Objekten @@ -5059,17 +5183,17 @@ was zu kleineren Diffs zwischen den Versionen führt Trenne multilayer Wände - + Warning, experimental feature! Warnung, experimentelle Funktion! - + Use IfcOpenShell serializer if available Verwende IfcOpenShell Serializer, falls verfügbar - + Export 2D objects as IfcAnnotations Exportiere 2D-Objekte als IfcAnnotations @@ -5094,12 +5218,12 @@ was zu kleineren Diffs zwischen den Versionen führt Ansicht beim Importieren anpassen - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Wenn diese Option aktiviert ist, werden alle FreeCAD-Objekteigenschaften in den exportierten Objekten gespeichert, so dass beim erneutem importieren ein vollständiges parametrisches Modell erstellt werden kann. - + Export full FreeCAD parametric model Export eines voll parametisierten FreeCAD model @@ -5154,59 +5278,59 @@ was zu kleineren Diffs zwischen den Versionen führt Ausschluss Liste: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Wenn diese Option aktiviert ist, werden gleiche Objekte nur einmal in der Datei verwendet. Dies kann die Dateigröße erheblich reduzieren, macht sie jedoch für den Menschen weniger lesbar - + Reuse similar entities Verwende ähnliche Objekte erneut - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Wenn möglich, werden IFC-Objekte, die extrudierte Rechtecke sind, als IfcRectangleProfileDef exportiert. Einige andere Anwendungen haben jedoch bekanntermaßen Probleme beim Importieren dieser Entität. In diesem Fall können Sie dies hier deaktivieren (alle Profile werden als IfcArbitraryClosedProfileDef exportiert). - + Disable IfcRectangleProfileDef IfcRectangleProfileDef Deaktivieren Set "Move base" property to True by default - Set "Move base" property to True by default + Setzen Sie die Eigenschaft "Mit Basis verschieben" standardmäßig auf "Wahr" IFC version - IFC version + IFC-Version The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + Die IFC-Version beeinflusst, welche Eigenschaften und Produkte unterstützt werden IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Leerzeichen Line style: - Line style: + Linienstil: @@ -5216,17 +5340,17 @@ was zu kleineren Diffs zwischen den Versionen führt Dashed - Dashed + Gestrichelt Dotted - Dotted + Gepunktet Dashdot - Dashdot + Strich-Punkt @@ -5234,14 +5358,49 @@ was zu kleineren Diffs zwischen den Versionen führt Linienfarbe - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Einige IFC-Typen wie IfcWall oder IfcBeam haben spezielle Standardfälle wie IfcWallStandardCase oder IfcBeamStandardCase. Wenn diese Option aktiviert ist, wird FreeCAD solche Objekte automatisch als Standardfall exportieren, wenn die erforderlichen Bedingungen erfüllt sind. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_el.qm b/src/Mod/Arch/Resources/translations/Arch_el.qm index 7c7f07066c..b04867ad24 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_el.qm and b/src/Mod/Arch/Resources/translations/Arch_el.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index 10b50f9ec0..38441ce56e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -44,12 +44,12 @@ Το αντικείμενο που κλωνοποιεί αυτό το εξάρτημα - + Other shapes that are appended to this object Άλλα σχήματα που είναι προσαρτημένα σε αυτό το αντικείμενο - + Other shapes that are subtracted from this object Άλλα σχήματα που έχουν αφαιρεθεί από αυτό το αντικείμενο @@ -79,7 +79,7 @@ Το εμβαδόν όλων των κατακόρυφων όψεων αυτού του αντικειμένου - + The area of the projection of this object onto the XY plane Το εμβαδόν της προβολής αυτού του αντικειμένου στο επίπεδο ΧΥ @@ -114,7 +114,7 @@ Το υπολογισμένο εμβαδόν αυτού του ορόφου - + The placement of this object Η τοποθέτηση αυτού του αντικειμένου @@ -144,12 +144,12 @@ Η περιστροφή του προφίλ γύρω από τον άξονα επέκτασής του - + The length of this element, if not based on a profile Το μήκος αυτού του στοιχείου, αν δεν βασίζεται σε κάποιο προφίλ - + The width of this element, if not based on a profile Το πλάτος αυτού του στοιχείου, αν δεν βασίζεται σε κάποιο προφίλ @@ -194,22 +194,22 @@ Το εμβαδόν αυτού του πάνελ - + The facemaker type to use to build the profile of this object Ο τύπος facemaker που θα χρησιμοποιηθεί για την δημιουργία του προφίλ αυτού του αντικειμένου - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Η κανονική διεύθυνση επέκτασης αυτού του αντικειμένου (κρατήστε το (0,0,0) για αυτόματη κανονική επιλογή) - + The linked object Το συνδεδεμένο αντικείμενο - + The line width of the rendered objects Το πλάτος γραμμής των παρεχόμενων αντικειμένων @@ -349,7 +349,7 @@ Το ύψος αυτού του στοιχείου - + The structural nodes of this element Οι δομικοί κόμβοι αυτού του στοιχείου @@ -614,132 +614,132 @@ Το υπολογιστικό φύλλο στο οποίο να εκτυπωθούν τα αποτελέσματα - + If false, non-solids will be cut too, with possible wrong results. Aν αυτό είναι ψευδές, θα περικοπούν και τα μη στερεά στοιχεία, με πιθανώς λανθασμένα αποτελέσματα. - + The display length of this section plane Το μήκος εμφάνισης αυτού του επιπέδου τομής - + The display height of this section plane Το ύψος εμφάνισης αυτού του επιπέδου τομής - + The size of the arrows of this section plane Το μέγεθος των βελών αυτού του επιπέδου τομής - + Show the cut in the 3D view Εμφανίστε την περικοπή σε τρισδιάστατη προβολή - + The rendering mode to use Η λειτουργία αποτύπωσης προς χρήση - + If cut geometry is shown or not Αν η κομμένη γεωμετρική οντότητα απεικονίζεται ή όχι - + If cut geometry is filled or not Αν η κομμένη γεωμετρική οντότητα είναι γεμάτη ή όχι - + The size of the texts inside this object Το μέγεθος των κειμένων μέσα σε αυτό το αντικείμενο - + If checked, source objects are displayed regardless of being visible in the 3D model Εάν επιλεχθούν, τα πηγαία αντικείμενα εμφανίζονται ανεξάρτητα από το αν είναι ορατά στο τρισδιάστατο μοντέλο - + The base terrain of this site Το βασικό έδαφος αυτής της τοποθεσίας - + The postal or zip code of this site Ο ταχυδρομικός κώδικας αυτής της τοποθεσίας - + The city of this site Η πόλη στην οποία βρίσκεται αυτή η τοποθεσία - + The country of this site Η χώρα στην οποία βρίσκεται αυτή η τοποθεσία - + The latitude of this site Το γεωγραφικό πλάτος αυτής της τοποθεσίας - + Angle between the true North and the North direction in this document Γωνία μεταξύ της πραγματικής διεύθυνσης του Βορρά και της διεύθυνσης του Βορρά σε αυτό το έγγραφο - + The elevation of level 0 of this site Η ανύψωση του επιπέδου 0 σε αυτήν την τοποθεσία - + The perimeter length of this terrain Το μήκος της περιμέτρου αυτού του τμήματος εδάφους - + The volume of earth to be added to this terrain Ο όγκος του χώματος που θα προστεθεί σε αυτό το τμήμα εδάφους - + The volume of earth to be removed from this terrain Ο όγκος του χώματος που θα αφαιρεθεί από αυτό το τμήμα εδάφους - + An extrusion vector to use when performing boolean operations Ένα διάνυσμα επέκτασης προς χρήση όταν εκτελούνται πράξεις άλγεβρας Boole - + Remove splitters from the resulting shape Κατάργηση διαχωριστών από το σχήμα που προκύπτει - + Show solar diagram or not Εμφανίστε το ηλιακό διάγραμμα ή όχι - + The scale of the solar diagram Η κλίμακα του ηλιακού διαγράμματος - + The position of the solar diagram Η θέση του ηλιακού διαγράμματος - + The color of the solar diagram Το χρώμα του ηλιακού διαγράμματος @@ -785,81 +785,76 @@ - A zone this space is part of - Μια ζώνη της οποίας είναι μέρος αυτός ο χώρος - - - The number of people who typically occupy this space Ο αριθμός των ανθρώπων που συνήθως καταλαμβάνουν αυτόν τον χώρο - + The electric power needed to light this space in Watts Η ηλεκτρική ισχύς που απαιτείται για να φωτίσει αυτόν τον χώρο σε Watt - + The electric power needed by the equipment of this space in Watts Η ηλεκτρική ενέργεια που απαιτείται από τον εξοπλισμό αυτού του χώρου σε Watt - + If True, Equipment Power will be automatically filled by the equipment included in this space Αν αυτό είναι αληθές, η απαραίτητη ισχύς θα παρέχεται αυτόματα από τον εξοπλισμό που περιέχεται σε αυτόν τον χώρο - + The type of air conditioning of this space Ο τύπος κλιματισμού αυτού του χώρου - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Το κείμενο προς εμφάνιση. Χρησιμοποιήστε $area, $label, $tag, $floor, $walls, $ceiling για να εισαγάγετε τα αντίστοιχα δεδομένα - + The name of the font Το όνομα της γραμματοσειράς - + The color of the area text Το χρώμα του κειμένου περιοχής - + The size of the text font Το μέγεθος της γραμματοσειράς κειμένου - + The size of the first line of text Το μέγεθος της πρώτης γραμμής του κειμένου - + The space between the lines of text Το κενό μεταξύ των γραμμών του κειμένου - + The position of the text. Leave (0,0,0) for automatic position Η θέση του κειμένου. Κρατήστε το (0,0,0) για αυτόματη τοποθέτηση - + The justification of the text Η αιτιολόγηση του κειμένου - + The number of decimals to use for calculated texts Ο αριθμός των δεκαδικών ψηφίων προς χρήση για κείμενα υπολογισμένων διαστάσεων - + Show the unit suffix Εμφανίστε την κατάληξη μονάδας @@ -939,102 +934,102 @@ Η απόσταση μεταξύ του ορίου των σκαλιών και της κατασκευής - + An optional extrusion path for this element Μια προαιρετική διαδρομή επέκτασης για αυτό το στοιχείο - + The height or extrusion depth of this element. Keep 0 for automatic Το ύψος ή βάθος επέκτασης αυτού του στοιχείου. Κρατήστε το 0 για αυτόματη επιλογή - + A description of the standard profile this element is based upon Μια περιγραφή του τυπικού προφίλ στο οποίο βασίζεται αυτό το στοιχείο - + Offset distance between the centerline and the nodes line Απόσταση μεταξύ της κεντρικής γραμμής και της γραμμής κόμβων - + If the nodes are visible or not Αν οι κόμβοι είναι ορατοί ή όχι - + The width of the nodes line Το πλάτος της γραμμής κόμβων - + The size of the node points Το μέγεθος των σημείων κόμβων - + The color of the nodes line Το χρώμα της γραμμής κόμβων - + The type of structural node Ο τύπος δομικού κόμβου - + Axes systems this structure is built on Συστήματα αξόνων στα οποία είναι χτισμένη αυτή η κατασκευή - + The element numbers to exclude when this structure is based on axes Οι αριθμοί στοιχείων που θα εξαιρεθούν όταν η εν λόγω κατασκευή βασίζεται σε άξονες - + If true the element are aligned with axes Αν αυτό είναι αληθές, τα στοιχεία είναι ευθυγραμμισμένα με άξονες - + The length of this wall. Not used if this wall is based on an underlying object Το μήκος αυτού του τοίχου. Δεν χρησιμοποιείται αν ο εν λόγω τοίχος βασίζεται σε κάποιο υποκείμενο στοιχείο - + The width of this wall. Not used if this wall is based on a face Το πλάτος αυτού του τοίχου. Δεν χρησιμοποιείται αν ο εν λόγω τοίχος βασίζεται σε κάποια όψη - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Το ύψος αυτού του τοίχου. Κρατήστε το 0 για αυτόματη επιλογή. Δεν χρησιμοποιείται αν ο εν λόγω τοίχος βασίζεται σε κάποιο στερεό στοιχείο - + The alignment of this wall on its base object, if applicable Η ευθυγράμμιση αυτού του τοίχου πάνω στο αντικείμενο βάσης του, αν είναι εφαρμόσιμο - + The face number of the base object used to build this wall Ο αριθμός όψης του αντικειμένου βάσης που χρησιμοποιήθηκε για την κατασκευή αυτού του τοίχου - + The offset between this wall and its baseline (only for left and right alignments) Η απόσταση μεταξύ του εν λόγω τοίχου και της βασικής γραμμής του (μόνο για ευθυγραμμίσεις στον οριζόντιο άξονα) - + The normal direction of this window Η κανονική κατεύθυνση αυτού του παραθύρου - + The area of this window Το εμβαδόν αυτού του παραθύρου @@ -1049,7 +1044,7 @@ Μια προαιρετική πρόσθετη τοποθέτηση για το προφίλ πριν την επέκταση - + Opens the subcomponents that have a hinge defined Ανοίγει τα υποσυστήματα που έχουν έναν ορισμένο εύκαμπτο σύνδεσμο @@ -1089,12 +1084,12 @@ Η λίστα με τα πάχη στρωμάτων - + The line color of the projected objects Το χρώμα γραμμής των προβεβλημένων αντικειμένων - + The color of the cut faces (if turned on) Το χρώμα των κομμένων όψεων (αν είναι ενεργοποιημένο) @@ -1104,7 +1099,7 @@ Η επικάλυψη των χορδιστών πάνω από τη βάση των σκαλοπατιών - + The number of the wire that defines the hole. A value of 0 means automatic Ο αριθμός του σύρματος που ορίζει την οπή. Μια τιμή 0 θα σημάνει αυτόματη επιλογή @@ -1194,7 +1189,7 @@ Η προσαρμοσμένη απόσταση του οπλισμού - + Shape of rebar Σχήμα του οπλισμού @@ -1204,17 +1199,17 @@ Αντιστρέψτε την κατεύθυνση της οροφής αν οδεύει προς τη λάθος πλευρά - + Shows plan opening symbols if available Εμφανίζει τα σύμβολα ανοίγματος σχεδίου αν διατίθενται - + Show elevation opening symbols if available Εμφανίστε τα σύμβολα ανοίγματος ανύψωσης αν διατίθενται - + The objects that host this window Τα αντικείμενα που φιλοξενούν αυτό το παράθυρο @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object Το σχήμα αυτού του αντικειμένου - + The line width of this object Το πλάτος γραμμής αυτού του αντικειμένου @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Η διαφάνεια αυτού του αντικειμένου - + The color of this object Το χρώμα αυτού του αντικειμένου - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Η απόσταση μεταξύ του κομμένου επιπέδου και της πραγματικής προβολής περικοπής (κρατήστε μια πολύ μικρή τιμή αλλά όχι μηδέν) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website Μια διεύθυνση URL που εμφανίζει αυτήν την τοποθεσία σε ιστοσελίδα χαρτογράφησης - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Μια προαιρετική απόσταση μεταξύ του σημείου τομής των αξόνων του μοντέλου (0,0,0) και του σημείου που υποδεικνύεται από τις γεωγραφικές συντεταγμένες - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Ενεργοποιήστε αυτό προκειμένου να κάνετε τον τοίχο να δημιουργήσει φραγμούς - + The length of each block Το μήκος κάθε φραγμού - + The height of each block Το ύψος κάθε φραγμού - + The horizontal offset of the first line of blocks Η οριζόντια μετατόπιση της πρώτης σειράς φραγμών - + The horizontal offset of the second line of blocks Η οριζόντια μετατόπιση της δεύτερης σειράς φραγμών - + The size of the joints between each block Το μέγεθος των αρθρώσεων μεταξύ των φραγμών - + The number of entire blocks Ο αριθμός των πλήρων φραγμών - + The number of broken blocks Ο αριθμός των σπασμένων φραγμών - + The components of this window Τα στοιχεία αυτού του παραθύρου - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Το βάθος της οπής που δημιουργεί αυτό το παράθυρο στο γονικό του αντικείμενο. Αν είναι 0, η τιμή θα υπολογίζεται αυτόματα. - + An optional object that defines a volume to be subtracted from hosts of this window Ένα προαιρετικό αντικείμενο που καθορίζει έναν όγκο προς αφαίρεση από τα γονικά στοιχεία αυτού του παραθύρου - + The width of this window Το πλάτος του παραθύρου - + The height of this window Το ύψος του παραθύρου - + The preset number this window is based on Ο προεπιλεγμένος αριθμός στον οποίο βασίζεται αυτό το παράθυρο - + The frame size of this window Το μέγεθος του πλαισίου του παραθύρου - + The offset size of this window Το αποτύπωμα αυτού του παραθύρου - + The width of louvre elements Το πλάτος των περσίδων - + The space between louvre elements Η απόσταση μεταξύ των περσίδων - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Ο αριθμός του σύρματος που ορίζει την οπή. Μια τιμή 0 θα σημάνει αυτόματη επιλογή @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Στοιχεία @@ -1717,12 +1742,12 @@ Δημιουργήστε Άξονα - + Remove Αφαίρεση - + Add Προσθήκη @@ -1832,87 +1857,87 @@ Προβολή - + Create Section Plane Δημιουργήστε επίπεδο τομής - + Create Site Δημιουργήστε Τοποθεσία - + Create Structure Δημιουργήστε Δομή - + Create Wall Δημιουργήστε Τοίχο - + Width Πλάτος - + Height Ύψος - + Error: Invalid base object Σφάλμα: Μη έγκυρο αντικείμενο βάσης - + This mesh is an invalid solid Αυτό το πλέγμα είναι ένα μη έγκυρο στερεό στοιχείο - + Create Window Δημιουργήστε Παράθυρο - + Edit Επεξεργασία - + Create/update component Δημιουργήστε/ενημερώστε στοιχείο - + Base 2D object Δισδιάστατο αντικείμενο βάσης - + Wires Σύρματα - + Create new component Δημιουργήστε νέο εξάρτημα - + Name Όνομα - + Type Τύπος - + Thickness Πάχος @@ -1922,7 +1947,7 @@ Σφάλμα: Αδύνατος ο καθορισμός της κωδικοποίησης χαρακτήρων - + file %s successfully created. το αρχείο %s δημιουργήθηκε με επιτυχία. @@ -1972,32 +1997,32 @@ Δημιουργήστε Σκάλες - + Length Μήκος - + Error: The base shape couldn't be extruded along this tool object Σφάλμα: Αδύνατη η επέκταση του σχήματος βάσης κατά μήκος αυτού του αντικειμένου-εργαλείου - + Couldn't compute a shape Αδύνατος ο υπολογισμός σχήματος - + Merge Wall Συγχωνεύστε Τοίχο - + Please select only wall objects Παρακαλώ επιλέξτε μόνο στοιχεία τοιχοποιίας - + Merge Walls Συγχωνεύστε Τοίχους @@ -2012,7 +2037,7 @@ Σφάλμα υπολογισμού του σχήματος αυτού του αντικειμένου - + Create Structural System Δημιουργήστε Δομικό Σύστημα @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Ύψος (χιλιοστά) - + Create Component Δημιουργήστε Στοιχείο @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Οι τοίχοι μπορούν να βασίζονται μόνο σε εξαρτήματα ή πλέγματα - + Set text position Καθορίστε τη θέση κειμένου - + Category Κατηγορία - + Key Κλειδί @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Τιμή - + Unit Μονάδα - + Create IFC properties spreadsheet Δημιουργήστε υπολογιστικό φύλλο ιδιοτήτων IFC @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Δημιουργήστε Φύλλο Περικοπής Πάνελ - + Facemaker returned an error Το Facemaker επέστρεψε ένα σφάλμα @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Δημιουργήστε Υποδοχή - + Precast elements Προκατασκευασμένα στοιχεία - + Slab type Τύπος πλάκας - + Chamfer Λοξότμηση - + Dent length Μήκος κοιλώματος - + Dent width Πλάτος κοιλώματος - + Dent height Ύψος κοιλώματος - + Slab base Βάση πλάκας - + Number of holes Αριθμός οπών - + Major diameter of holes Μεγάλη διάμετρος των οπών - + Minor diameter of holes Μικρή διάμετρος των οπών - + Spacing between holes Απόσταση μεταξύ των οπών - + Number of grooves Αριθμός ραβδώσεων - + Depth of grooves Βάθος ραβδώσεων - + Height of grooves Ύψος ραβδώσεων - + Spacing between grooves Απόσταση μεταξύ των ραβδώσεων - + Number of risers Αριθμός των βαθμίδων - + Length of down floor Μήκος του κάτω δαπέδου - + Height of risers Ύψος των βαθμίδων - + Depth of treads Πλάτος των σκαλοπατιών - + Precast options Προκατασκευασμένες επιλογές - + Dents list Λίστα κοιλωμάτων - + Add dent Προσθέστε κοίλωμα - + Remove dent Αφαιρέστε κοίλωμα - + Slant Κλίση - + Level Επίπεδο - + Rotation Περιστροφή - + Offset Μετατοπίστε @@ -2422,58 +2447,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Χρονοδιάγραμμα - + There is no valid object in the selection. Site creation aborted. Δεν υπάρχει κάποιο έγκυρο αντικείμενο στην επιλογή. Η δημιουργία τοποθεσίας ματαιώθηκε. - + Node Tools Εργαλεία Κόμβων - + Reset nodes Επαναφέρετε κόμβους - + Edit nodes Επεξεργαστείτε κόμβους - + Extend nodes Επεκτείνετε κόμβους - + Extends the nodes of this element to reach the nodes of another element Επεκτείνει τους κόμβους αυτού του στοιχείου ώστε να φτάσουν τους κόμβους κάποιου άλλου στοιχείου - + Connect nodes Ενώστε κόμβους - + Connects nodes of this element with the nodes of another element Ενώνει τους κόμβους αυτού του στοιχείου με κόμβους κάποιου άλλου στοιχείου - + Toggle all nodes Εναλλαγή της λειτουργίας όλων των κόμβων - + Toggles all structural nodes of the document on/off Ενεργοποιεί ή απενεργοποιεί όλους τους δομικούς κόμβους του εγγράφου - + Intersection found. Σημείο τομής βρέθηκε. @@ -2485,22 +2510,22 @@ Site creation aborted. Πόρτα - + Hinge Εύκαμπτος σύνδεσμος - + Opening mode Λειτουργία ανοίγματος - + Get selected edge Λάβετε την επιλεγμένη ακμή - + Press to retrieve the selected edge Πιέστε για να ανακτήσετε την επιλεγμένη ακμή @@ -2530,17 +2555,17 @@ Site creation aborted. Νέο στρώμα - + Wall Presets... Προεπιλογές Τοίχου... - + Hole wire Σύρμα οπής - + Pick selected Διαλέξτε τα επιλεγμένα @@ -2625,17 +2650,17 @@ Site creation aborted. Αυτό το αντικείμενο δεν έχει καμία όψη - + Space boundaries Όρια χώρου - + Error: Unable to modify the base object of this wall Σφάλμα: Δεν μπορείτε να τροποποιήσετε το αντικείμενο βάση αυτού του τοίχου - + Window elements Στοιχεία παραθύρου @@ -2747,7 +2772,7 @@ Building creation aborted. Όλα καλά! Δεν βρέθηκαν προβλήματα - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Το αντικείμενο δεν έχει κάποιο χαρακτηριστικό ιδιοτήτων IFC. Ακυρώστε τη δημιουργία υπολογιστικού φύλλου για το αντικείμενο: @@ -2930,47 +2955,47 @@ Floor creation aborted. Δεν επισυνάπτεται κάποιο υπολογιστικό φύλλο σε αυτό το χρονοδιάγραμμα - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Περιστροφή Υ - + Rotate Y Περιστροφή Υ - + Rotate Z Περιστροφή Ζ - + Resize Resize - + Center Κέντρο - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2981,77 +3006,77 @@ Note: You can change that in the preferences. Σημείωση: Αυτό μπορείτε να το αλλάξετε στις προτιμήσεις. - + Choose another Structure object: Επιλέξτε κάποιο άλλο Δομικό στοιχείο: - + The chosen object is not a Structure Το επιλεγμένο στοιχείο δεν είναι Δομή - + The chosen object has no structural nodes Το επιλεγμένο στοιχείο δεν έχει δομικούς κόμβους - + One of these objects has more than 2 nodes Ένα από αυτά τα αντικείμενα έχει περισσότερους από 2 κόμβους - + Unable to find a suitable intersection point Αδύνατη η εύρεση κατάλληλου σημείου τομής - + Intersection found. Σημείο τομής βρέθηκε. - + The selected wall contains no subwall to merge Ο επιλεγμένος τοίχος δεν περιέχει κάποιο υπόβαθρο για να συγχωνεύσετε - + Cannot compute blocks for wall Αδύνατος ο υπολογισμός των φραγμών για τον τοίχο - + Choose a face on an existing object or select a preset Διαλέξτε μια όψη σε ένα υπάρχον αντικείμενο ή επιλέξτε μια προεπιλεγμένη - + Unable to create component Αδύνατη η δημιουργία εξαρτήματος - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ο αριθμός του σύρματος που ορίζει μια οπή στο γονικό αντικείμενο. Η τιμή μηδέν θα συνεπάγεται την αυτόματη επιλογή του μεγαλύτερου σύρματος - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. Η βιβλιοθήκη pycollada δεν βρέθηκε, η υποστήριξη αρχείων collada είναι απενεργοποιημένη. @@ -3091,7 +3116,7 @@ Note: You can change that in the preferences. Σφάλμα: Η έκδοση της IfcOpenShell εργαλειοθήκης σας είναι πολύ παλιά - + Successfully written Γράφτηκε με επιτυχία @@ -3101,7 +3126,7 @@ Note: You can change that in the preferences. Βρέθηκε σχήμα που περιέχει καμπύλες, τριγωνοποίηση σε εξέλιξη - + Successfully imported Εισήχθη με επιτυχία @@ -3117,45 +3142,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Προσθήκη επιλεγμένων - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Αριστερά + + + + Right + Δεξιά + + + + Use sketches + Χρησιμοποιήστε σκαριφήματα + + + + Structure + Κατασκευή + + + + Window + Παράθυρο + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3368,21 +3508,16 @@ You can change that in the preferences. Checks the selected objects for problems Ελέγχει τα επιλεγμένα αντικείμενα για προβλήματα - - - Explore the contents of an IFC file - Εξερευνήστε τα περιεχόμενα ενός αρχείου IFC - Arch_CloneComponent - + Clone component Κλωνοποιήστε εξάρτημα - + Clones an object as an undefined architectural component Κλωνοποιεί ένα αντικείμενο ως ένα απροσδιόριστο αρχιτεκτονικό στοιχείο @@ -3403,12 +3538,12 @@ You can change that in the preferences. Arch_Component - + Component Στοιχείο - + Creates an undefined architectural component Δημιουργεί ένα απροσδιόριστο αρχιτεκτονικό στοιχείο @@ -3442,12 +3577,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3541,23 +3676,15 @@ You can change that in the preferences. Οι δείκτες όψεων προς απόκρυψη - - Arch_IfcExplorer - - - Ifc Explorer - Εξερευνητής Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Δημιουργήστε υπολογιστικό φύλλο IFC... - + Creates a spreadsheet to store IFC properties of an object. Δημιουργεί ένα υπολογιστικό φύλλο για αποθήκευση των ιδιοτήτων IFC ενός αντικειμένου. @@ -3586,12 +3713,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Συγχωνεύστε Τοίχους - + Merges the selected walls, if possible Συγχωνεύει τους επιλεγμένους τοίχους, αν είναι εφικτό @@ -3797,12 +3924,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Επίπεδο Τομής - + Creates a section plane object, including the selected objects Δημιουργεί ένα στοιχείο επιπέδου τομής, συμπεριλαμβάνοντας τα επιλεγμένα στοιχεία @@ -3823,12 +3950,12 @@ You can change that in the preferences. Arch_Site - + Site Τοποθεσία - + Creates a site object including selected objects. Δημιουργεί μια τοποθεσία συμπεριλαμβάνοντας επιλεγμένα στοιχεία. @@ -3875,12 +4002,12 @@ You can change that in the preferences. Arch_Structure - + Structure Κατασκευή - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Δημιουργεί ένα δομικό στοιχείο από την αρχή ή από κάποιο επιλεγμένο στοιχείο (σκαρίφημα, σύρμα, επιφάνεια ή στερεό στοιχείο) @@ -3888,12 +4015,12 @@ You can change that in the preferences. Arch_Survey - + Survey Επισκόπηση - + Starts survey Εκκινεί την επισκόπηση @@ -3901,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Εναλλαγή του δείκτη IFC Brep - + Force an object to be exported as Brep or not Επιβάλλετε την εξαγωγή ενός στοιχείου ως Brep ή όχι @@ -3914,12 +4041,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Εναλλαγή υποσυστημάτων - + Shows or hides the subcomponents of this object Εμφανίζει ή αποκρύπτει τα υποσυστήματα αυτού του στοιχείου @@ -3940,12 +4067,12 @@ You can change that in the preferences. Arch_Window - + Window Παράθυρο - + Creates a window object from a selected object (wire, rectangle or sketch) Δημιουργεί ένα στοιχείο παραθύρου από ένα επιλεγμένο στοιχείο (σύρμα, ορθογώνιο ή σκαρίφημα) @@ -4216,7 +4343,7 @@ You can change that in the preferences. Draft - + Writing camera position Θέση κάμερας εγγραφής @@ -4652,7 +4779,7 @@ You can change that in the preferences. Διαφάνεια: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Σε ορισμένους θεατές IFC δεν αρέσουν τα αντικείμενα που εξάγονται ως επεκτάσεις. Χρησιμοποιήστε αυτό προκειμένου να αναγκάσετε όλα τα αντικείμενα να εξαχθούν ως γεωμετρία BREP. @@ -4692,7 +4819,7 @@ You can change that in the preferences. Πάχος - + Force export as Brep Δύναμη εξαγωγής ως Brep @@ -4722,7 +4849,7 @@ You can change that in the preferences. DAE - + Export options Επιλογές εξαγωγής @@ -4932,22 +5059,22 @@ You can change that in the preferences. Να επιτραπούν τα τετράπλευρα - + Use triangulation options set in the DAE options page Χρησιμοποιήστε τις επιλογές τριγωνοποίησης που έχουν οριστεί στη σελίδα επιλογών DAE - + Use DAE triangulation options Χρησιμοποιήστε τις επιλογές τριγωνοποίησης DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Καμπύλα σχήματα που δεν μπορούν να αναπαρασταθούν ως καμπύλες στο IFC αναλύονται σε επίπεδες όψεις. Αν αυτό έχει επιλεχθεί, γίνεται κάποιος πρόσθετος υπολογισμός για να ενωθούν συνεπίπεδες όψεις. - + Join coplanar facets when triangulating Ενώστε συνεπίπεδες όψεις κατά την τριγωνοποίηση @@ -4987,12 +5114,12 @@ You can change that in the preferences. Εισάγετε τις ιδιότητες Ifc σε υπολογιστικό φύλλο - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Όταν εξάγετε αντικείμενα χωρίς UID, το UID που παράγεται θα αποθηκεύεται μέσα στο FreeCAD στοιχείο για επανάχρηση την επόμενη φορά που θα εξαχθεί αυτό το αντικείμενο, κάτι που δίνει μικρότερες διαφορές μεταξύ εκδόσεων - + Store IFC universal ID in FreeCAD objects Αποθηκεύστε το καθολικό IFC ID σε FreeCAD στοιχεία @@ -5062,17 +5189,17 @@ You can change that in the preferences. Διαιρέστε πολυστρωματικούς τοίχους - + Warning, experimental feature! Προειδοποίηση, πειραματικό χαρακτηριστικό! - + Use IfcOpenShell serializer if available Χρησιμοποιήστε το IfcOpenShell πρόγραμμα σειριοποίησης αν διατίθεται - + Export 2D objects as IfcAnnotations Εξαγάγετε δισδιάστατα αντικείμενα ως Περιγραφές Ifc @@ -5097,12 +5224,12 @@ You can change that in the preferences. Προσαρμόστε την προβολή κατά την εισαγωγή - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Αν αυτό έχει επιλεχθεί, όλες οι ιδιότητες των FreeCAD στοιχείων θα αποθηκεύονται εντός των εξαγόμενων αντικειμένων, επιτρέποντας την αναδημιουργία ενός πλήρους παραμετρικού μοντέλου κατά την επανεισαγωγή. - + Export full FreeCAD parametric model Εξαγάγετε πλήρες παραμετρικό μοντέλο FreeCAD @@ -5157,22 +5284,22 @@ You can change that in the preferences. Αποκλείστε λίστα: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Επαναχρησιμοποίηση παρόμοιων οντοτήτων - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5237,14 +5364,49 @@ You can change that in the preferences. Χρώμα γραμμής - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm index 6719c184b7..9d64c23dd7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index d29b4f2e8f..ad4cb3e15e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -44,12 +44,12 @@ El objeto de este componente se esta clonando - + Other shapes that are appended to this object Otras formas que están anexadas a este objeto - + Other shapes that are subtracted from this object Otras formas que están extraídas de este objeto @@ -79,7 +79,7 @@ El área de todas caras verticales de este objeto - + The area of the projection of this object onto the XY plane El área de la proyección de este objeto sobre el plano XY @@ -114,7 +114,7 @@ La superficie calculada para este piso - + The placement of this object La posición de este objeto @@ -144,12 +144,12 @@ Rotación del perfil alrededor de su eje de extrusión - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile La anchura de este elemento, si no está basado en un perfil @@ -194,22 +194,22 @@ El área de este panel - + The facemaker type to use to build the profile of this object El tipo facemaker se usa para construir el perfil de este objeto - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Dirección de extrusión normal de este objeto (mantener (0,0,0) para normal automática) - + The linked object El objeto vinculado - + The line width of the rendered objects La anchura de la línea de los objetos renderizados @@ -349,7 +349,7 @@ La altura de este elemento - + The structural nodes of this element Los nodos estructurales de este elemento @@ -614,132 +614,132 @@ La hoja de cálculo para imprimir los resultados - + If false, non-solids will be cut too, with possible wrong results. Si es false, los objetos no sólidos se cortarán, con posibles resultados equivocados. - + The display length of this section plane Mostrar la longitud del plano de sección - + The display height of this section plane Mostrar la altura de este plano de sección - + The size of the arrows of this section plane El tamaño de las flechas de este plano de sección - + Show the cut in the 3D view Mostrar el corte en la vista 3D - + The rendering mode to use El modo de renderizado a utilizar - + If cut geometry is shown or not Si la geometría de corte se muestra o no - + If cut geometry is filled or not Si el corte de la geometría está lleno o no - + The size of the texts inside this object El tamaño de los textos dentro de este objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Si está marcada, se muestran objetos de origen sin importar ser visible en el modelo 3D - + The base terrain of this site El terreno base de este sitio - + The postal or zip code of this site Código postal de este sitio - + The city of this site La ciudad de este sitio - + The country of this site El país de este sitio - + The latitude of this site La latitud de este sitio - + Angle between the true North and the North direction in this document Ángulo entre el norte verdadero y la dirección del norte en este documento - + The elevation of level 0 of this site La elevación del nivel 0 de este sitio - + The perimeter length of this terrain La longitud del perímetro de este terreno - + The volume of earth to be added to this terrain El volumen de tierra que se añade a este terreno - + The volume of earth to be removed from this terrain El volumen de tierra de este terreno - + An extrusion vector to use when performing boolean operations Un vector de extrusión a utilizar al realizar operaciones booleanas - + Remove splitters from the resulting shape Quite los separadores de la forma resultante - + Show solar diagram or not Mostrar diagrama solar o no - + The scale of the solar diagram La escala del diagrama solar - + The position of the solar diagram La posición del diagrama solar - + The color of the solar diagram El color del diagrama solar @@ -785,81 +785,76 @@ - A zone this space is part of - Una zona de este espacio es parte de - - - The number of people who typically occupy this space El número de personas que normalmente ocupan este espacio - + The electric power needed to light this space in Watts La energía eléctrica necesaria para iluminar este espacio en vatios - + The electric power needed by the equipment of this space in Watts Potencia eléctrica necesaria para este equipo de este espacio en Vatios - + If True, Equipment Power will be automatically filled by the equipment included in this space Si es Verdadero, la Potencia del Equipo será automáticamente llenada por el equipo incluido en este espacio - + The type of air conditioning of this space El tipo de aire acondicionado de este espacio - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data El texto a mostra. Utilizar $area, $label, $tag, $floor, $walls, $ceiling para insertar los datos correspondientes - + The name of the font El nombre de la fuente - + The color of the area text El color del área de texto - + The size of the text font El tamaño de la fuente de texto - + The size of the first line of text El tamaño de la primera línea de texto - + The space between the lines of text El espacio entre las líneas de texto - + The position of the text. Leave (0,0,0) for automatic position La posición del texto. Dejar (0,0,0) para posicion automática - + The justification of the text La justificación del texto - + The number of decimals to use for calculated texts El número de decimales a utilizar para textos calculados - + Show the unit suffix Mostrar el sufijo de unidad @@ -939,102 +934,102 @@ La distancia entre el borde de las escaleras y la estructura - + An optional extrusion path for this element Una ruta de extrusión opcional para este elemento - + The height or extrusion depth of this element. Keep 0 for automatic La altura o profundidad de extrusión de este elemento. Mantener 0 para automático - + A description of the standard profile this element is based upon Una descripcion del perfil estándar en el que este elemento se basa - + Offset distance between the centerline and the nodes line Una distancia de separación entre la linea central y las lineas punteadas - + If the nodes are visible or not Si los nodos son visibles o no - + The width of the nodes line El ancho de la línea de los nodos - + The size of the node points El tamaño de los puntos de nodo - + The color of the nodes line El color de la línea de nodos - + The type of structural node El tipo de nodo estructural - + Axes systems this structure is built on Los sistemas de ejes de esta estructura estan basados en - + The element numbers to exclude when this structure is based on axes El numero de elementos a excluir cuando esta estructura esta basada en ejes - + If true the element are aligned with axes Si true el elemento está alineado con los ejes - + The length of this wall. Not used if this wall is based on an underlying object La longitud de este muro. No usado si esta pared se basa en un objeto subyacente - + The width of this wall. Not used if this wall is based on a face La anchura de esta pared. No usado si esta pared se basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid La altura de esta pared. Dejar el 0 para automático. No usado si esta pared se basa en un sólido - + The alignment of this wall on its base object, if applicable La alineación de este muro sobre su objeto base, si corresponde - + The face number of the base object used to build this wall El número de caras del objeto base utilizado para construir esta pared - + The offset between this wall and its baseline (only for left and right alignments) El desplazamiento entre esta pared y su línea de base (sólo para alineaciones de izquierda y derecha) - + The normal direction of this window La dirección normal de esta ventana - + The area of this window El área de esta ventana @@ -1049,7 +1044,7 @@ Una colocación adicional opcional para añadir al perfil antes de extruirlo - + Opens the subcomponents that have a hinge defined Abre los subcomponentes que tienen una bisagra definida @@ -1089,12 +1084,12 @@ La lista de espesores por capa - + The line color of the projected objects El color de línea de los objetos proyectados - + The color of the cut faces (if turned on) El color de las caras cortadas (si está encendido) @@ -1104,7 +1099,7 @@ La superposicion de los largueros sobre la parte inferior de los peldaños - + The number of the wire that defines the hole. A value of 0 means automatic El número del cable que define el agujero. Un valor de 0 significa automático @@ -1194,7 +1189,7 @@ El espacio personalizado de la varilla - + Shape of rebar Forma de la varilla @@ -1204,17 +1199,17 @@ Girar la dirección del techo si va al revés - + Shows plan opening symbols if available Muestra los símbolos de apertura de la planta si está disponible - + Show elevation opening symbols if available Muestra los símbolos de apertura de la elevación si están disponibles - + The objects that host this window Los objetos que alberga esta ventana @@ -1269,12 +1264,12 @@ El nivel del punto (0,0,0) de este nivel - + The shape of this object La forma de este objeto - + The line width of this object El ancho de la linea de este objeto @@ -1414,47 +1409,47 @@ Si es verdadero, los colores del archivo vinculado se mantendrán actualizados - + The objects that must be considered by this section plane. Empty means the whole document. Los objetos que deben ser considerados por este plano de sección. Vacío significa todo el documento. - + The transparency of this object La transparencia de este objeto - + The color of this object El color de este objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distancia entre el plano de corte y la vista actual de corte (mantener esto a un valor muy bajo pero no cero) - + The street and house number of this site, with postal box or apartment number if needed La calle y el número de casa de este sitio, con número postal o número de apartamento si es necesario - + The region, province or county of this site La región, provincia o condado de este sitio - + A url that shows this site in a mapping website Un url que muestra este sitio en un sitio web de mapas - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Un desplazamiento opcional entre el origen del modelo (0,0,0) y el punto indicado por las coordenadas geográficas - + Specifies if this space is internal or external Especifica si este espacio es interno o externo @@ -1504,200 +1499,230 @@ El 'contorno izquierdo' de todos los segmentos de escaleras - + Enable this to make the wall generate blocks Permitir esto para hacer bloques de pared generados - + The length of each block La longitud de cada bloque - + The height of each block El alto de cada bloque - + The horizontal offset of the first line of blocks El desplazamiento horizontal de la primera linea de bloques - + The horizontal offset of the second line of blocks El desplazamiento horizontal de la segunda linea de bloques - + The size of the joints between each block El tamaño de las juntas entre cada bloque - + The number of entire blocks El número de bloques enteros - + The number of broken blocks El número de bloques rotos - + The components of this window Los componentes de esta ventana - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. La profundidad del agujero que esta ventana hace en su objeto anfitrión. Si es 0, el valor se calculará automáticamente. - + An optional object that defines a volume to be subtracted from hosts of this window Un objeto opcional que define un volumen a ser sustraído desde el anfitrión de esta ventana - + The width of this window El ancho de esta ventana - + The height of this window El alto de esta ventana - + The preset number this window is based on El número preestablecido en el que es basado esta ventana - + The frame size of this window El tamaño del marco de esta ventana - + The offset size of this window El tamaño del margen de esta ventana - + The width of louvre elements El ancho de las rejillas - + The space between louvre elements El espacio entre las rejillas - + The number of the wire that defines the hole. If 0, the value will be calculated automatically El número de mallas que define el agujero. Si es 0, el valor será calculado automáticamente Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Especifica si mover este objeto mueve su base en su lugar A single section of the fence - A single section of the fence + Una sola sección de la valla A single fence post - A single fence post + Un solo poste de valla The Path the fence should follow - The Path the fence should follow + La trayectoria que debe seguir la valla The number of sections the fence is built of - The number of sections the fence is built of + El número de secciones de las que se construye la valla The number of posts used to build the fence - The number of posts used to build the fence + El número de postes usados para construir la valla - + The type of this object - The type of this object + La tipo de este objeto IFC data - IFC data + Datos IFC IFC properties of this object - IFC properties of this object + Propiedades IFC de este objeto - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + La descripción de los atributos IFC aún no se han implementado + + + + If True, resulting views will be clipped to the section plane area. + Si es verdadero, las vistas resultantes se verán acopladas al área de plano de sección. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Si es verdadero, el color del material de los objetos se utilizará para llenar las áreas cortadas. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Cuando se configura en 'True North' toda la geometría será rotada para coincidir con el verdadero norte de este sitio - + + Show compass or not + Mostrar brújula o no + + + + The rotation of the Compass relative to the Site + La rotación de la brújula relativa al Sitio + + + + The position of the Compass relative to the Site placement + La posición de la Compañía relativa a la colocación del Sitio + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Actualizar el valor de declinación basado en la rotación de brújula The thickness of the risers - The thickness of the risers + El espesor de las contrahuellas The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + El 'contorno derecho' de todos los segmentos de escaleras + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Componentes @@ -1717,12 +1742,12 @@ Crear eje - + Remove Quitar - + Add Añadir @@ -1832,87 +1857,87 @@ Vista de - + Create Section Plane Crear el plano de sección - + Create Site Crear sitio - + Create Structure Crear estructura - + Create Wall Crear muro - + Width Ancho - + Height Altura - + Error: Invalid base object Error: Objeto base no válido - + This mesh is an invalid solid Esta malla es un sólido no válido - + Create Window Crear la ventana - + Edit Editar - + Create/update component Crear/actualizar componente - + Base 2D object Objeto base 2D - + Wires Alambres - + Create new component Crear nuevo componente - + Name Nombre - + Type Tipo - + Thickness Espesor @@ -1922,7 +1947,7 @@ Error: No se pudo determinar la codificación de caracteres - + file %s successfully created. archivo %s creado correctamente. @@ -1972,32 +1997,32 @@ Crear Escaleras - + Length Longitud - + Error: The base shape couldn't be extruded along this tool object Error: La figura base no pudo ser extruída a lo largo del objeto guía - + Couldn't compute a shape No se pudo procesar una figura - + Merge Wall Unir Muro - + Please select only wall objects Por favor seleccione sólo objetos muro - + Merge Walls Unir Muros @@ -2012,7 +2037,7 @@ Error al calcular la forma del objeto - + Create Structural System Crear sistema estructural @@ -2172,7 +2197,7 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Altura (mm) - + Create Component Crear componente @@ -2187,17 +2212,17 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Las paredes sólo pueden basarse en objetos de tipo malla o parte - + Set text position Establecer la posición del texto - + Category Categoría - + Key Clave @@ -2207,12 +2232,12 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Valor - + Unit Unidad - + Create IFC properties spreadsheet Crear la hoja de cálculo de propiedades IFC @@ -2242,7 +2267,7 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Crear hoja de Panel - + Facemaker returned an error Facemaker devolvió un error @@ -2267,137 +2292,137 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Crear Conector - + Precast elements Elementos prefabricados - + Slab type Tipo de baldosa - + Chamfer Chaflán - + Dent length Longitud de la abolladura - + Dent width Ancho de la abolladura - + Dent height Alto de la abolladura - + Slab base Base de baldosa - + Number of holes Número de agujeros - + Major diameter of holes Mayor diámetro de agujeros - + Minor diameter of holes Menor diámetro de agujeros - + Spacing between holes Espacio entre agujeros - + Number of grooves Número de ranuras - + Depth of grooves Profundidad de las ranuras - + Height of grooves Altura de las ranuras - + Spacing between grooves Espaciamiento entre ranuras - + Number of risers Número de contrahuellas - + Length of down floor Longitud de la planta baja - + Height of risers Altura de contrahuellas - + Depth of treads Profundidad de peldaños - + Precast options Opciones de prefabricado - + Dents list Lista de abolladuras - + Add dent Agregar abolladura - + Remove dent Remover abolladura - + Slant Inclinación - + Level Nivel - + Rotation Rotación - + Offset Equidistancia @@ -2422,58 +2447,58 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Planificación - + There is no valid object in the selection. Site creation aborted. No hay ningún objeto válido en la selección. La creación del sitio será abortada. - + Node Tools Herramientas de Nodos - + Reset nodes Reiniciar nodos - + Edit nodes Editar nodos - + Extend nodes Extender nodos - + Extends the nodes of this element to reach the nodes of another element Extiende los nodos de este elemento para que alcancen los nodos de otro elemento - + Connect nodes Conectar nodos - + Connects nodes of this element with the nodes of another element Conecta los nodos de este elemento con los nodos de otro elemento - + Toggle all nodes Conmuta todos los nodos - + Toggles all structural nodes of the document on/off Cambia todos los nodos estructurales del documento a encendido/apagado - + Intersection found. Intersección encontrada. @@ -2485,22 +2510,22 @@ Site creation aborted. Puerta - + Hinge Bisagra - + Opening mode Modo de apertura - + Get selected edge Obtener la arista seleccionada - + Press to retrieve the selected edge Presione para recuperar la arista seleccionada @@ -2530,17 +2555,17 @@ Site creation aborted. Nueva capa - + Wall Presets... Ajustes preestablecidos de la pared... - + Hole wire Agujero - + Pick selected Elegir lo seleccionado @@ -2625,17 +2650,17 @@ Site creation aborted. Este objeto no tiene cara - + Space boundaries Fronteras de espacio - + Error: Unable to modify the base object of this wall Error: No se puede modificar el objeto base de esta pared - + Window elements Elementos de la ventana @@ -2747,7 +2772,7 @@ Creación del edificio abortada. ¡Todo bien! No se encontraron problemas - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: El objeto no contiene el atributo IfcProperties. Cancelar la creación de hojas de cálculo para el objeto: @@ -2812,10 +2837,10 @@ Creación del edificio abortada. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Puede colocar cualquier cosa que no sean los siguientes objetos: Sitio, Edificio y Planta: en un objeto Planta. +El objeto de Planta no tiene permitido aceptar objetos de Sitio, Edificios, o Planta. +Los objetos de Sitio, Edificio y Planta se eliminarán de la selección. +Puedes cambiar eso en las preferencias. @@ -2929,47 +2954,47 @@ Floor creation aborted. Ninguna hoja de cálculo adjunta a este horario - + Section plane settings Ajustes de plano de sección - + Objects seen by this section plane: Objetos vistos por esta seccion del plano: - + Section plane placement: Ubicación de plano de sección: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar - + Center Centro - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2978,77 +3003,77 @@ Note: You can change that in the preferences. Nota: Tu puedes cambiar esto en las preferencias. - + Choose another Structure object: Elija otro objeto de la estructura: - + The chosen object is not a Structure El objeto elegido no es una Estructura - + The chosen object has no structural nodes El objeto escogido no tiene nodos estructurales - + One of these objects has more than 2 nodes Uno de estos objetos tiene más de 2 nodos - + Unable to find a suitable intersection point No se puede encontrar un punto de intersección adecuado - + Intersection found. Intersección encontrada. - + The selected wall contains no subwall to merge La pared seleccionada no contiene subparedes para unir - + Cannot compute blocks for wall No se puede calcular los bloques para la pared - + Choose a face on an existing object or select a preset Elige una cara en un objeto existente o seleccione por defecto - + Unable to create component No se ha podido crear el componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El número del alambre que define un agujero en el objeto huésped. Un valor de cero adoptará automáticamente el alambre más grande - + + default + por defecto - + If this is checked, the default Frame value of this window will be added to the value entered here Si se marca esta opción, el valor predeterminado del Marco de esta ventana se agregará al valor ingresado aquí - + If this is checked, the default Offset value of this window will be added to the value entered here Si se marca esta opción, el valor predeterminado de Offset de esta ventana se agregará al valor ingresado aquí - + pycollada not found, collada support is disabled. no se ha encontrado el módulo pycollada, deshabilitado. @@ -3088,7 +3113,7 @@ Nota: Tu puedes cambiar esto en las preferencias. Error: la versión de IfcOpenShell está obsoleta - + Successfully written Escrito exitosamente @@ -3098,7 +3123,7 @@ Nota: Tu puedes cambiar esto en las preferencias. Se ha encontrado una forma que contiene curvas, triangulando - + Successfully imported Importados con éxito @@ -3108,50 +3133,165 @@ Nota: Tu puedes cambiar esto en las preferencias. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Puedes poner cualquier cosa excepto objetos de Sitio y de Edificio en un objeto de Edificio. +El objeto de Edificio no tiene permitido aceptar objetos de Sitio y Edificio. +Objetos de Sitio y de Edificio serán removidos de la selección. +Tu puedes cambiar esto en las preferencias. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Eliminar objetos resaltados de la lista anterior - + Add selected Añadir la selección - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Añadir objeto(s) seleccionado al alcance de este plano de sección + + + + Rotates the plane along the X axis + Rota el plano a lo largo del eje X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Rota el plano a lo largo del eje Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Rota el plano a lo largo del eje Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Redimensiona el plano para encajar los objetos en la lista anterior - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Centra el plano en los objetos de la lista anterior - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Primer punto de la viga + + + + Base point of column + Punto base de columna + + + + Next point + Siguiente punto + + + + Structure options + Opciones de la estructura + + + + Drawing mode + Modo dibujo + + + + Beam + Viga + + + + Column + Columna + + + + Preset + Configuración Preestablecida + + + + Switch L/H + Cambiar L/H + + + + Switch L/W + Cambiar L/W + + + + Con&tinue + Repetir + + + + First point of wall + Primer punto del muro + + + + Wall options + Opciones de muro + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Esta lista muestra todos los objetos MultiMaterials de este documento. Crea algunos para definir tipos de muro. + + + + Alignment + Alineación + + + + Left + Izquierda + + + + Right + Derecha + + + + Use sketches + Utilizar bocetos + + + + Structure + Estructura + + + + Window + Ventana + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3365,21 +3505,16 @@ You can change that in the preferences. Checks the selected objects for problems Verificar problemas de los objetos seleccionados - - - Explore the contents of an IFC file - Explorar el contenido de un archivo IFC - Arch_CloneComponent - + Clone component Clonar componente - + Clones an object as an undefined architectural component Crea un objeto como un componente arquitectónico indefinido @@ -3400,12 +3535,12 @@ You can change that in the preferences. Arch_Component - + Component Componente - + Creates an undefined architectural component Crea un Componente arquitectónico indefinido @@ -3439,14 +3574,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Valla - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Crea un objeto de valla de una sección seleccionada, poste y ruta @@ -3538,23 +3673,15 @@ You can change that in the preferences. Los índices de las caras a ocultar - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crear la hoja de cálculo IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea una hoja de cálculo para almacenar las propiedades IFC de un objeto. @@ -3583,12 +3710,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Unir Muros - + Merges the selected walls, if possible Une las paredes seleccionadas si es posible @@ -3794,12 +3921,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plano de sección - + Creates a section plane object, including the selected objects Crea una sección plana de un objeto, incluidos los objetos seleccionados @@ -3820,12 +3947,12 @@ You can change that in the preferences. Arch_Site - + Site Situación - + Creates a site object including selected objects. Crea un objeto de situación, incluyendo los objetos seleccionados. @@ -3872,12 +3999,12 @@ You can change that in the preferences. Arch_Structure - + Structure Estructura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea un objeto de estructura a partir de cero o a partir de un objeto seleccionado (croquis, contorno, cara o sólido) @@ -3885,12 +4012,12 @@ You can change that in the preferences. Arch_Survey - + Survey Encuesta - + Starts survey Iniciar encuesta @@ -3898,12 +4025,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Alternar IFG Brep flag - + Force an object to be exported as Brep or not Forzar a un objeto para ser exportado como Brep o no @@ -3911,12 +4038,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Alternar subcomponentes - + Shows or hides the subcomponents of this object Muestra u oculta los subcomponentes de este objeto @@ -3937,12 +4064,12 @@ You can change that in the preferences. Arch_Window - + Window Ventana - + Creates a window object from a selected object (wire, rectangle or sketch) Crea una ventana al objeto de un objeto seleccionado (alambre, rectángulo o sketch) @@ -4214,7 +4341,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Draft - + Writing camera position Escribir posición de la cámara @@ -4650,7 +4777,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Transparencia: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Algunos visores IFC no admiten los objetos exportados como extrusiones. Con esto se fuerza a todos los objetos a ser exportados como geometría BREP. @@ -4690,7 +4817,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Espesor - + Force export as Brep Forzar exportar como Brep @@ -4720,7 +4847,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes DAE - + Export options Opciones de exportación @@ -4930,22 +5057,22 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Permitir cuadrados - + Use triangulation options set in the DAE options page Usar opciones de triangulación que figuran en la página de opciones DAE - + Use DAE triangulation options Utiliar opciones de triangulación DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Formas curvas que no se pueden ser representadas como curvas en IFC se descomponen en facetas planas. Sí se comprueba, se realizarán algunos cálculos adicionales para unir facetas coplanares. - + Join coplanar facets when triangulating Unir facetas coplanares cuando triangule @@ -4985,12 +5112,12 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Importar las propiedades ifc en la hoja de cálculo - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Al exportar objetos sin UID, el UID generado se almacenará dentro del objeto FreeCAD para su reutilización la próxima vez que se exporte el objeto, lo que da diferencias más pequeños entre las versiones - + Store IFC universal ID in FreeCAD objects Guardar ID universal de IFC en objetos de FreeCAD @@ -5060,17 +5187,17 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Separar muros multicapas - + Warning, experimental feature! ¡Atención, característica experimental! - + Use IfcOpenShell serializer if available Utilizar serializador IfcOpenShell si está disponible - + Export 2D objects as IfcAnnotations Exportar objetos 2D como IfcAnnotations @@ -5095,12 +5222,12 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Ajustar la vista durante la importación - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Si está marcada, todas las propiedades del objeto de FreeCAD se almacenarán en los objetos exportados, permitiendo recrear un modelo paramétrico completo al reimportar. - + Export full FreeCAD parametric model Exportar un modelo paramétrico completo de FreeCAD @@ -5155,59 +5282,59 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Excluir lista: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Si esto se marca, cuando sea posible, se usarán entidades similares solo una vez en el archivo. Esto puede reducir mucho el tamaño del archivo, pero lo hará menos legible para los humanos - + Reuse similar entities Reutilizar entidades similares - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Cuando es posible, los objetos IFC que son rectángulos extruidos se exportan como IfcRectangleProfileDef. Sin embargo, algunas otras aplicaciones notoriamente tienen problemas para importar esa entidad. Si este es su caso, puede deshabilitarlo aquí (todos los perfiles se exportarán como IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Desactivar IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Configurar la propiedad "Mover base" a True por defecto IFC version - IFC version + Versión IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + La versión de IFC cambiará qué atributos y productos son compatibles IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Espacios Line style: - Line style: + Estilo de línea: @@ -5217,17 +5344,17 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Dashed - Dashed + Discontinua Dotted - Dotted + Discontinua Dashdot - Dashdot + DashDot @@ -5235,14 +5362,49 @@ Nota: a partir de LibreOffice v5.4.5.1 el camino correcto ahora es: barra de pes Color de línea - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Algunos tipos de IFC, como IfcWall o IfcBeam, tienen versiones estándar especiales, como IfcWallStandardCase o IfcBeamStandardCase. Si esta opción está activada, FreeCAD exportará automáticamente tales objetos como casos estándar cuando se cumplan las condiciones necesarias. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index 0564c3a9ac..9e5064dbd5 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index dadab4b8d8..7fdcfff06b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -44,12 +44,12 @@ Osagai hau klonatzen ari den objektua - + Other shapes that are appended to this object Objektu honi erantsitako beste forma batzuk - + Other shapes that are subtracted from this object Objektu honi kendutako beste forma batzuk @@ -76,17 +76,17 @@ The area of all vertical faces of this object - Objektu honen aurpegi bertikal guztien azalera + Objektu honen aurpegi bertikal guztien area - + The area of the projection of this object onto the XY plane Objektu honen proiekzioaren area XY planoan The perimeter length of the horizontal area - Azalera horizontalaren perimetroaren luzera + Area horizontalaren perimetroaren luzera @@ -111,10 +111,10 @@ The computed floor area of this floor - Solairu honetan kalkulatutako zoru-azalera + Solairu honetan kalkulatutako zoru-area - + The placement of this object Objektu honen kokapena @@ -144,12 +144,12 @@ Profilaren biraketa bere estrusio-ardatzaren inguruan - + The length of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago - + The width of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago @@ -191,25 +191,25 @@ The area of this panel - Panel honen azalera + Panel honen area - + The facemaker type to use to build the profile of this object Objektu honen profila eraikitzeko erabiliko den aurpegi-sortzailearen mota - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Objektu honen estrusio-norabide normala (mantendu (0,0,0) normal automatikorako) - + The linked object Estekatutako objektua - + The line width of the rendered objects Errendatutako objektuen lerro-luzera @@ -349,7 +349,7 @@ Elementu honen altuera - + The structural nodes of this element Elementu honen egiturazko nodoak @@ -614,132 +614,132 @@ Emaitzak inprimatzeko erabiliko den kalkulu-orria - + If false, non-solids will be cut too, with possible wrong results. Gezurra bada, solidoak ez direnak ere moztuko dira, eta emaitzak okerrak izan daitezke. - + The display length of this section plane Sekzio-plano honen bistaratze-luzera - + The display height of this section plane Sekzio-plano honen bistaratze-altuera - + The size of the arrows of this section plane Sekzio-plano honen gezien tamaina - + Show the cut in the 3D view Erakutsi ebaketa 3D bistan - + The rendering mode to use Erabiliko den errendatze-modua - + If cut geometry is shown or not Ebaketa-geometria erakutsiko den ala ez - + If cut geometry is filled or not Ebaketa-geometria beteta dagoen ala ez - + The size of the texts inside this object Objektu honen barruko testuen tamaina - + If checked, source objects are displayed regardless of being visible in the 3D model Markatuta badago, iturburu-objektuak erakutsi egingo dira, 3D ereduan ikusgarriak izan zein ez - + The base terrain of this site Gune honen oinarri-lurrazala - + The postal or zip code of this site Gune honen posta-kodea - + The city of this site Gune honen hiria - + The country of this site Gune honen herrialdea - + The latitude of this site Gune honen latitudea - + Angle between the true North and the North direction in this document Benetako iparraren eta dokumentu honen iparraren arteko angelua - + The elevation of level 0 of this site Gunen honen 0 mailaren garaiera - + The perimeter length of this terrain Lurrazal honen perimetro-luzera - + The volume of earth to be added to this terrain Lurrazal honi gehituko zaion lur-bolumena - + The volume of earth to be removed from this terrain Lurrazal honi kenduko zaion lur-bolumena - + An extrusion vector to use when performing boolean operations Boolear eragiketak egitean erabiliko den estrusio-bektore bat - + Remove splitters from the resulting shape Kendu emaitza gisa sortu den formaren zatitzaileak - + Show solar diagram or not Erakutsi edo ez eguzki-diagrama - + The scale of the solar diagram Eguzki-diagramaren eskala - + The position of the solar diagram Eguzki-diagramaren posizioa - + The color of the solar diagram Eguzki-diagramaren kolorea @@ -751,7 +751,7 @@ The computed floor area of this space - Espazio honetan kalkulatutako solairu-azalera + Espazio honetan kalkulatutako solairu-area @@ -785,81 +785,76 @@ - A zone this space is part of - Espazio hau ataltzat duen zona bat - - - The number of people who typically occupy this space Espazio honetan normalean egoten den pertsona kopurua - + The electric power needed to light this space in Watts Espazio hau argiztatzeko behar den indar elektrikoa, watt-etan - + The electric power needed by the equipment of this space in Watts Espazio honetako ekipamenduak behar duen energia elektrikoa, watt-etan - + If True, Equipment Power will be automatically filled by the equipment included in this space Egia bada, ekipamendu-energia automatikoki beteko da espazio honetan sartutako ekipamenduarekin - + The type of air conditioning of this space Espazio honetako aire egokituaren mota - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Erakutsiko den testua. Erabili $area, $label, $tag, $floor, $walls, $ceiling bakoitzari dagokion datua txertatzeko - + The name of the font Letra-tipoaren izena - + The color of the area text Area-testuaren kolorea - + The size of the text font Testuaren letra-tamaina - + The size of the first line of text Testuaren lehen lerroaren tamaina - + The space between the lines of text Testu-lerroen arteko tartea - + The position of the text. Leave (0,0,0) for automatic position Testuaren posizioa. Utzi (0,0,0) posizio automatikorako - + The justification of the text Testuaren justifikazioa - + The number of decimals to use for calculated texts Testu kalkulatuetan erabiliko den dezimal kopurua - + Show the unit suffix Erakutsi unitate-atzizkia @@ -939,102 +934,102 @@ Eskailera-ertzaren eta egituraren arteko desplazamendua - + An optional extrusion path for this element Aukerako estrusio-bide bat elementu honetarako - + The height or extrusion depth of this element. Keep 0 for automatic Elementu honen altuera edo estrusio-sakonera. Mantendu 0 balio automatikoa erabiltzeko - + A description of the standard profile this element is based upon Elementu honek oinarritzat duen profil estandarraren deskribapena - + Offset distance between the centerline and the nodes line Erdiko lerroaren eta nodo-lerroen arteko desplazamendu-distantzia - + If the nodes are visible or not Nodoak ikusgai dauden ala ez - + The width of the nodes line Nodo-lerroaren zabalera - + The size of the node points Nodo-puntuen tamaina - + The color of the nodes line Nodo-lerroaren kolorea - + The type of structural node Egitura-nodoaren mota - + Axes systems this structure is built on Egitura honen oinarria diren ardatz-sistemak - + The element numbers to exclude when this structure is based on axes Egitura hau ardatzetan oinarrituta dagoenean baztertuko diren elementuen zenbakiak - + If true the element are aligned with axes Egia bada, elementuak ardatzekin lerrokatuta daude - + The length of this wall. Not used if this wall is based on an underlying object Pareta honen luzera. Ez erabili pareta hau azpiko objektu batean oinarriturik badago - + The width of this wall. Not used if this wall is based on a face Pareta honen zabalera. Ez erabili aurpegi batean oinarriturik badago - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Pareta honen altuera. Mantendu 0 automatiko egiteko. Ez erabili pareta hau solido batean oinarriturik badago - + The alignment of this wall on its base object, if applicable Pareta honen lerrokatzea bere oinarri-objektuarekiko, aplikagarria bada - + The face number of the base object used to build this wall Pareta hau eraikitzeko erabili den oinarri-objektuaren aurpegi kopurua - + The offset between this wall and its baseline (only for left and right alignments) Pareta honen eta bere oinarri-lerroaren arteko desplazamendua (ezkerreko eta eskuineko lerrokatzeetarako soilik) - + The normal direction of this window Leiho honen norabide normala - + The area of this window Leiho honen area @@ -1049,7 +1044,7 @@ Aukerako kokapen gehigarri bat, profilari gehituko zaiona hura estruitu baino lehen - + Opens the subcomponents that have a hinge defined Gontz bat definituta duten azpiosagaiak irekitzen ditu @@ -1089,12 +1084,12 @@ Geruza-lodieren zerrenda - + The line color of the projected objects Proiektatutako objektuen lerro-kolorea - + The color of the cut faces (if turned on) Mozketa-aurpegien kolorea (aktibatuta badago) @@ -1104,7 +1099,7 @@ Zankabeen gainjartzea mailagainen behealdearen gainetik - + The number of the wire that defines the hole. A value of 0 means automatic Zuloa definitzen duen alanbrearen zenbakia. 0 balioak automatikoa esan nahi du @@ -1194,7 +1189,7 @@ Armadura-barraren tarte pertsonalizatua - + Shape of rebar Armadura-barraren forma @@ -1204,17 +1199,17 @@ Teilatuaren noranzkoa iraultzen du, noranzko okerrean badago - + Shows plan opening symbols if available Erakutsi plano-irekiguneen ikurrak, erabilgarri badaude - + Show elevation opening symbols if available Erakutsi garaiera-irekiguneen ikurrak, erabilgarri badaude - + The objects that host this window Leiho honen ostalaria diren objektuak @@ -1269,12 +1264,12 @@ Maila honetako (0,0,0) puntuaren maila - + The shape of this object Objektu honen forma - + The line width of this object Objektu honen lerro-zabalera @@ -1414,47 +1409,47 @@ Egia bada, estekatutako fitxategiarekin koloreak eguneratuta mantenduko dira - + The objects that must be considered by this section plane. Empty means the whole document. Sekzio-plano honek kontuan hartu behar diren objektuak. Hutsik badago, dokumentu osoa hartuko da. - + The transparency of this object Objektu honen gardentasuna - + The color of this object Objektu honen kolorea - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Mozte-planoaren eta uneko bistaren moztearen arteko distantzia (balio horrek oso txikia izan behar du, baina ez zero) - + The street and house number of this site, with postal box or apartment number if needed Gune honen kalearen eta atariaren zenbakia, posta-kodea edo etxebizitza zenbakia barne, beharrezkoa bada - + The region, province or county of this site Gune honen eskualdea edo probintzia - + A url that shows this site in a mapping website Gune hau mapatze-webgune batean erakutsiko duen URL bat - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Ereduaren (0,0,0) jatorriaren eta geokoordinatuek adierazten duten puntuaren arteko aukerako desplazamendu bat - + Specifies if this space is internal or external Espazio hau barrukoa ala kanpokoa den zehazten du @@ -1504,200 +1499,230 @@ Eskaileraren segmentu guztien 'ezkerreko eskema' - + Enable this to make the wall generate blocks Gaitu hau paretak blokeak sor ditzan - + The length of each block Bloke bakoitzaren luzera - + The height of each block Bloke bakoitzaren altuera - + The horizontal offset of the first line of blocks Blokeen lehen lerroaren desplazamendu horizontala - + The horizontal offset of the second line of blocks Blokeen bigarren lerroaren desplazamendu horizontala - + The size of the joints between each block Blokeen arteko elkarguneen tamaina - + The number of entire blocks Bloke osoen kopurua - + The number of broken blocks Bloke hautsien kopurua - + The components of this window Leiho honen osagaiak - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Leiho honek bere ostalari-objektuan egiten duen zuloaren sakonera. 0 bada, balioa automatikoki kalkulatuko da. - + An optional object that defines a volume to be subtracted from hosts of this window Aukerako objektu bat, leiho honen ostalarietatik kenduko den bolumena definitzen duena - + The width of this window Leiho honen zabalera - + The height of this window Leiho honen altuera - + The preset number this window is based on Leiho honek oinarri gisa duen aurrezarpen-zenbakia - + The frame size of this window Leiho honen marko-tamaina - + The offset size of this window Leiho honen desplazamendu-tamaina - + The width of louvre elements Zursare-elementuen zabalera - + The space between louvre elements Zursare-elementuen arteko espazioa - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Zuloa definitzen duen alanbrearen zenbakia. 0 bada, balioa automatikoki kalkulatuko da Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Objektu hau mugitzeak bere oinarria mugituko duen zehazten du A single section of the fence - A single section of the fence + Hesiaren sekzio bakarra A single fence post - A single fence post + Hesiaren zutoin bakarra The Path the fence should follow - The Path the fence should follow + Hesiak jarriatu behako lukeen bidea The number of sections the fence is built of - The number of sections the fence is built of + Hesiak duen sekzio kopurua The number of posts used to build the fence - The number of posts used to build the fence + Hesia eraikitzeko erabilitako zutoin kopurua - + The type of this object - The type of this object + Objektu honen mota IFC data - IFC data + IFC datuak IFC properties of this object - IFC properties of this object + Objektu honen IFC propietateak - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + IFC atributuen deskribapena ez da oraindik garatu + + + + If True, resulting views will be clipped to the section plane area. + Egia bada, emaitzako bistak sekzio-planoaren areara moztuko dira. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Egia bada, objektuen materialaren kolorea mozte-areak betetzeko erabiliko da. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + 'Benetako iparra' ezarrita dagoenean, geometria osoa biratuko da gune honen benetako iparrarekin bat etortzeko - + + Show compass or not + Erakutsi iparrorratza edo ez + + + + The rotation of the Compass relative to the Site + Iparrorratzaren biraketa gunearekiko + + + + The position of the Compass relative to the Site placement + Iparrorratzaren posizioa gunearen kokalekuarekiko + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Eguneratu deklinazioaren balioa iparrorratzaren biraketan oinarrituta The thickness of the risers - The thickness of the risers + Kontramailen lodiera The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + Eskaileraren segmentu guztien 'eskuineko eskema' + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Osagaiak @@ -1717,12 +1742,12 @@ Sortu ardatza - + Remove Kendu - + Add Gehitu @@ -1832,87 +1857,87 @@ Honen ikuspegia - + Create Section Plane Sortu ebakidura-planoa - + Create Site Sortu gunea - + Create Structure Sortu azpiegitura - + Create Wall Sortu pareta - + Width Zabalera - + Height Altuera - + Error: Invalid base object Errore: oinarri-objektu onartezina - + This mesh is an invalid solid Sare hau solido onrtezina da - + Create Window Sortu Leiho - + Edit Editatu - + Create/update component Sortu/eguneratu osagaia - + Base 2D object 2D-oinarri objektua - + Wires Alanbreak - + Create new component Osagai berria sortu - + Name Izena - + Type Mota - + Thickness Lodiera @@ -1922,7 +1947,7 @@ Errore: Karaktere kodeketa ezin da zehaztu - + file %s successfully created. %s fitxategia zuzen sortua. @@ -1972,32 +1997,32 @@ Sortu eskailera - + Length Luzera - + Error: The base shape couldn't be extruded along this tool object Errorea: Oinarri-forma ezin da estruitu tresna-objektu honetan zehar - + Couldn't compute a shape Ezin izan da forma bat kalkulatu - + Merge Wall Fusionatu pareta - + Please select only wall objects Hautatu pareta-objektuak soilik - + Merge Walls Fusionatu paretak @@ -2012,7 +2037,7 @@ Errorea objektu honen forma kalkulatzean - + Create Structural System Sortu egiturazko sistema @@ -2172,7 +2197,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatu egiten da eta, beraz, altuera p Altuera (mm) - + Create Component Sortu osagaia @@ -2187,17 +2212,17 @@ Distantzia = 0 bada, orduan distantzia kalkulatu egiten da eta, beraz, altuera p Pareten oinarrizko objektuak piezak edo sareak soilik izan daitezke - + Set text position Ezarri testuaren posizioa - + Category Kategoria - + Key Gakoa @@ -2207,12 +2232,12 @@ Distantzia = 0 bada, orduan distantzia kalkulatu egiten da eta, beraz, altuera p Balioa - + Unit Unitatea - + Create IFC properties spreadsheet Sortu IFC propietateen kalkulu-orria @@ -2242,7 +2267,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatu egiten da eta, beraz, altuera p Sortu panel-orria - + Facemaker returned an error Aurpegi-sortzaileak errorea eman du @@ -2267,137 +2292,137 @@ Distantzia = 0 bada, orduan distantzia kalkulatu egiten da eta, beraz, altuera p Sortu konektorea - + Precast elements Aurrefabrikazio-elementuak - + Slab type Xafla mota - + Chamfer Alaka - + Dent length Mailatu-luzera - + Dent width Mailatu-zabalera - + Dent height Mailatu-altuera - + Slab base Xafla-oinarria - + Number of holes Zulo kopurua - + Major diameter of holes Zuloen diametro handiena - + Minor diameter of holes Zuloen diametro txikiena - + Spacing between holes Zuloen arteko tartea - + Number of grooves Arteka kopurua - + Depth of grooves Arteken sakonera - + Height of grooves Arteken altuera - + Spacing between grooves Arteken arteko tartea - + Number of risers Kontramaila kopurua - + Length of down floor Beheko solairuaren luzera - + Height of risers Kontramailen altuera - + Depth of treads Kontramailen sakonera - + Precast options Aurrefabrikatze-aukerak - + Dents list Mailatuen zerrenda - + Add dent Gehitu mailatua - + Remove dent Kendu mailatua - + Slant Makurdura - + Level Maila - + Rotation Biraketa - + Offset Desplazamendua @@ -2422,59 +2447,59 @@ Distantzia = 0 bada, orduan distantzia kalkulatu egiten da eta, beraz, altuera p Programazioa - + There is no valid object in the selection. Site creation aborted. Ez dago baliozko objekturik hautapenean. Gunearen sorrera utzi egin da. - + Node Tools Nodo-tresnak - + Reset nodes Berrezarri nodoak - + Edit nodes Editatu nodoak - + Extend nodes Luzatu nodoak - + Extends the nodes of this element to reach the nodes of another element Elementu honen nodoak luzatzen ditu beste elementu bateko nodoetara iristeko - + Connect nodes Konektatu nodoak - + Connects nodes of this element with the nodes of another element Elementu honen nodoak beste elementu bateko nodoekin konektatzen ditu - + Toggle all nodes Txandakatu nodo guztiak - + Toggles all structural nodes of the document on/off Dokumentuaren egitura-nodo guztiak aktibatzen/desaktibatzen ditu - + Intersection found. Ebakidura aurkitu da. @@ -2486,22 +2511,22 @@ Gunearen sorrera utzi egin da. Atea - + Hinge Gontza - + Opening mode Irekitze modua - + Get selected edge Hartu hautatutako ertza - + Press to retrieve the selected edge Sakatu hautatutako ertza atzitzeko @@ -2531,17 +2556,17 @@ Gunearen sorrera utzi egin da. Geruza berria - + Wall Presets... Pareta-aurrezarpenak... - + Hole wire Zulo-alanbrea - + Pick selected Hartu hautatua @@ -2626,24 +2651,24 @@ Gunearen sorrera utzi egin da. Objektu honek ez dauka aurpegirik - + Space boundaries Espazio-mugak - + Error: Unable to modify the base object of this wall Errorea: Ezin izan da aldatu pareta honen oinarri-objektua - + Window elements Leiho-elementuak Survey - Inkesta + Lur-neurketa @@ -2748,7 +2773,7 @@ Eraikinaren sorrera utzi egin da. Ederto! Ez dugu arazorik aurkitu - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Objektuak ez du IfcProperties atributurik. Utzi kalkulu-orria sortzeari honako objekturako: @@ -2813,10 +2838,10 @@ Eraikinaren sorrera utzi egin da. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Edozer jar dezakezu, honako objektuak salbu: gunea, eraikina eta solairua, solairu-objektu batean. +Solairu-objektuak ez ditu onartzen guneak, eraikinak edo solairuak. +Guneak, eraikinak eta solairuak kendu egingo dira hautapenetik. +Portaera hori hobespenetan aldatu daiteke. @@ -2931,47 +2956,47 @@ Solairuaren sorrera utzi egin da. Programazio honek ez du kalkulu-orririk erantsita - + Section plane settings Sekzio-planoaren ezarpenak - + Objects seen by this section plane: Sekzio-plano honek ikusten dituen objektuak: - + Section plane placement: Sekzio-planoaren kokapena: - + Rotate X Biratu X - + Rotate Y Biratu Y - + Rotate Z Biratu Z - + Resize Aldatu tamaina - + Center Erdia - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Beste objektuak kendu egingo dira hautapenetik. Portaera hori aldatu egin daiteke hobespenetan. - + Choose another Structure object: Aukeratu beste egitura-objektu bat: - + The chosen object is not a Structure Aukeratutako objektua ez da egitura bat - + The chosen object has no structural nodes Aukeratutako objektuak ez du egitura-nodorik - + One of these objects has more than 2 nodes Objektu hauetako batek 2 nodo baino gehiago ditu - + Unable to find a suitable intersection point Ezin izan da ebakidura-puntu egoki bat aurkitu - + Intersection found. Ebakidura aurkitu da. - + The selected wall contains no subwall to merge Hautatutako paretak ez dauka azpiparetarik fusionatzeko - + Cannot compute blocks for wall Ezin dira blokeak kalkulatu paretarako - + Choose a face on an existing object or select a preset Aukeratu lehendik dagoen objektu baten aurpegi bat edo hautatu aurrezarpen bat - + Unable to create component Ezin izan da osagaia sortu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ostalari-objektuan zulo bat definitzen duen alanbrearen zenbakia. Zero balioak alanbrerik luzeena hartuko du automatikoki - + + default + lehenetsia - + If this is checked, the default Frame value of this window will be added to the value entered here Hau markatuta badago, leiho honen markoaren balio lehenetsia hemen sartutako balioari gehituko zaio - + If this is checked, the default Offset value of this window will be added to the value entered here Hau markatuta badago, leiho honen desplazamenduaren balio lehenetsia hemen sartutako balioari gehituko zaio - + pycollada not found, collada support is disabled. Ez da pycollada aurkitu, collada euskarria desgaitu da. @@ -3092,7 +3117,7 @@ Portaera hori aldatu egin daiteke hobespenetan. Errorea: zure IfcOpenShell bertsioa zaharregia da - + Successfully written Ongi idatzi da @@ -3102,7 +3127,7 @@ Portaera hori aldatu egin daiteke hobespenetan. Kurbak dituen forma bat aurkitu da, triangelukatzen - + Successfully imported Ongi inportatu da @@ -3112,50 +3137,165 @@ Portaera hori aldatu egin daiteke hobespenetan. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Edozer jar dezakezu eraikin-objektu batean, guneak eta eraikinak salbu. +Eraikin-objektuek ez dute onartzen gunerik edo eraikinik. +Guneak eta eraikinak hautapenetik kendu egingo dira. +Portaera hori aldatu egin daiteke hobespenetan. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Kendu nabarmendutako objektuak goiko zerrendatik - + Add selected Gehitu hautatuak - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Gehitu hautatutako objektua(k) sekzio-plano honen esparrura + + + + Rotates the plane along the X axis + Planoa X ardatzean biratzen du - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Planoa Y ardatzean biratzen du - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Planoa Z ardatzean biratzen du - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Planoa goiko zerrendako objektuekin doitzeko biratzen du - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Planoa goiko zerrendako objektuetan zentratzen du - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Habearen lehen puntua + + + + Base point of column + Zutabearen oinarri-puntua + + + + Next point + Hurrengo puntua + + + + Structure options + Egitura-aukerak + + + + Drawing mode + Marrazte modua + + + + Beam + Habea + + + + Column + Zutabea + + + + Preset + Aurrezarpena + + + + Switch L/H + Txandakatu L/A + + + + Switch L/W + Txandakatu L/Z + + + + Con&tinue + Ja&rraitu + + + + First point of wall + Paretaren lehen puntua + + + + Wall options + Pareta-aukerak + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Zerrenda honek dokumentuko material anitzeko objektu guztiak erakusten ditu. Sortu batzuk pareta motak definitzeko. + + + + Alignment + Lerrokatzea + + + + Left + Ezkerrekoa + + + + Right + Eskuinekoa + + + + Use sketches + Erabili krokisak + + + + Structure + Egitura + + + + Window + Leihoa + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Hautatutako objektuak aztertzen ditu arazoak dituzten aurkitzeko - - - Explore the contents of an IFC file - Arakatu IFC fitxategi baten edukiak - Arch_CloneComponent - + Clone component Klonatu osagaia - + Clones an object as an undefined architectural component Objektu bat klonatzen du arkitektura-osagai definitu gabea sortzeko @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Osagaia - + Creates an undefined architectural component Definitu gabeko arkitektura-osagai bat sortzen du @@ -3443,14 +3578,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Hesia - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Hesi-objektu bat sortzen du hautatutako sekzio, zutoin eta bide bat erabilita @@ -3542,23 +3677,15 @@ You can change that in the preferences. Ezkutatuko diren aurpegien indizeak - - Arch_IfcExplorer - - - Ifc Explorer - Ifc exploratzailea - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Sortu IFC kalkulu-orria... - + Creates a spreadsheet to store IFC properties of an object. Kalkulu-orri bat sortzen du objektu baten IFC propietateak gordetzeko. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Fusionatu paretak - + Merges the selected walls, if possible Hautatutako paretak fusionatzen ditu, posible bada @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Sekzio-planoa - + Creates a section plane object, including the selected objects Sekzio-plano bat sortzen du, hautatutako objektuak barne hartuz @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Gunea - + Creates a site object including selected objects. Gune-objektu bat sortzen du hautatutako objektuak barne hartuz. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Egitura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Egitura-objektu bat sortzen du, zerotik hasita edo hautatutako krokis, alanbre, aurpegi edo solido batetik @@ -3889,25 +4016,25 @@ You can change that in the preferences. Arch_Survey - + Survey - Inkesta + Lur-neurketa - + Starts survey - Inkesta abiarazten du + Lur-neurketa abiarazten du Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Txandakatu IFC Brep bandera - + Force an object to be exported as Brep or not Behartu objektu bat Brep gisa, edo ez, esportatua izan dadin @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Txandakatu azpiosagaiak - + Shows or hides the subcomponents of this object Objektu honen azpiosagaiak erakusten edo ezkutatzen ditu @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Leihoa - + Creates a window object from a selected object (wire, rectangle or sketch) Leiho-objektu bat sortzen du hautatutako alanbre, laukizuzen edo krokis batetik @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Kamera-kokapena idazten @@ -4653,7 +4780,7 @@ You can change that in the preferences. Gardentasuna: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Zenbait IFC bisorek ez dituzte gustuko estrusio gisa esportatutako objektuak. Erabili hau objektu guztiak BREP geometria gisa esportatuak izan daitezen behartzeko. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Lodiera - + Force export as Brep Behartu Brep gisa esportatzea @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Esportazio-aukerak @@ -4933,22 +5060,22 @@ You can change that in the preferences. Onartu karratuak - + Use triangulation options set in the DAE options page Erabili DAE aukeren orrian ezarritako triangelaketa-aukerak - + Use DAE triangulation options Erabili DAE triangelaketa-aukerak - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. IFCn kurba modura irudikatu ezin diren forma kurgatuak alderdi lauetan deskonposatuko dira. Hau markatuta badago, zenbait kalkulu gehiago egin behar dira alderdi planokideak elkartzeko. - + Join coplanar facets when triangulating Elkartu alderdi planokideak triangelaketa egitean @@ -4988,12 +5115,12 @@ You can change that in the preferences. Inportatu Ifc propietateak kalkulu-orrira - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions UIDrik gabeko objektuak esportatzean, sortutako UIDa FreeCAD objektuaren barruan gordeko da objektu hori berriro esportatu behar denerako, eta horrek diferentzia txikiak sortzen ditu bertsioen artean - + Store IFC universal ID in FreeCAD objects Gorde IFC ID unibertsalak FreeCAD objektuetan @@ -5030,7 +5157,7 @@ You can change that in the preferences. Survey - Inkesta + Lur-neurketa @@ -5063,17 +5190,17 @@ You can change that in the preferences. Zatitu geruza anitzeko paretak - + Warning, experimental feature! Kontuz, eginbide esperimentala! - + Use IfcOpenShell serializer if available Erabili IfcOpenShell serializatzailea, erabilgarri badago - + Export 2D objects as IfcAnnotations Esportatu 2D objektuak IfcAnnotation modura @@ -5098,12 +5225,12 @@ You can change that in the preferences. Doitu ikuspegia inportatzean - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Hau markatuta badago, FreeCAD objektu-propietate guztiak esportatutako objektuen barruan gordeko dira, objektuak berriro inportatzean eredu parametriko osoa birsortu ahal izateko. - + Export full FreeCAD parametric model Esportatu FreeCADen eredu erabat parametrikoa @@ -5158,59 +5285,59 @@ You can change that in the preferences. Baztertze-zerrenda: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Hau markatuta dagoenean, antzeko entitateak behin bakarrik erabiliko dira fitxategian, posible bada. Horrek fitxategiaren tamaina txikiagotuko du, baina gizakiek zailtasun gehiago izango dute hura irakurtzeko - + Reuse similar entities Berrerabili antzeko entitateak - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Posible bada, laukizuzen estruituak diren IFC objektuak IfcRectangleProfileDef gisa esportatuko dira. Hala ere, beste aplikazio batzuk arazoak dituzte entitate hori inportatzeko. Zure kasua bada, hemen desgaitu dezakezu portaera hori (profil guztiak IfcArbitraryClosedProfileDef gisa esportatuko dira). - + Disable IfcRectangleProfileDef Desgaitu IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Ezarri "Mugitu oinarria" propietatean 'Egia' balioa modu lehenetsian IFC version - IFC version + IFC bertsioa The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + IFC bertsioak aldatu egingo du zein atributu eta zein produktu onartzen den IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Espazioak Line style: - Line style: + Lerro-estiloa: @@ -5220,17 +5347,17 @@ You can change that in the preferences. Dashed - Dashed + Marratua Dotted - Dotted + Puntukatua Dashdot - Dashdot + Marra-puntua @@ -5238,14 +5365,49 @@ You can change that in the preferences. Lerro-kolorea - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + IFC mota batzuek, adibidez IfcWall edo IfcBeam, bertsio estandar bereziak dituzte: IfcWallStandardCase edo IfcBeamStandardCase. Aukera hau aktibatutako badago, GreeCADek automatikoki esportatuko ditu objektu horiek kasu estandar gisa, derrigorrezko baldintzak betetzen direnean. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.qm b/src/Mod/Arch/Resources/translations/Arch_fi.qm index 58754fee60..c895f843ae 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fi.qm and b/src/Mod/Arch/Resources/translations/Arch_fi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index f93cb15010..555b715c2c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -44,12 +44,12 @@ The object this component is cloning - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object @@ -79,7 +79,7 @@ The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -114,7 +114,7 @@ The computed floor area of this floor - + The placement of this object Tämän kohteen sijoittelu @@ -144,12 +144,12 @@ The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -194,22 +194,22 @@ The area of this panel - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font Fontin nimi - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window Tämän ikkunan pinta-ala @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Osat @@ -1717,12 +1742,12 @@ Luo akseli - + Remove Poista - + Add Lisää @@ -1832,87 +1857,87 @@ Näkymä - + Create Section Plane Luo lohkotaso - + Create Site Luo kohde - + Create Structure Luo rakenne - + Create Wall Luo seinä - + Width Leveys - + Height Korkeus - + Error: Invalid base object Virhe: Virheellinen perus-objekti - + This mesh is an invalid solid Tämä verkkopinta ei ole monitahokas - + Create Window Luo ikkuna - + Edit Muokkaa - + Create/update component Luo/päivitä osa - + Base 2D object Perustana oleva 2D objekti - + Wires Langat - + Create new component Luo uusi komponentti - + Name Nimi - + Type Tyyppi - + Thickness Paksuus @@ -1922,7 +1947,7 @@ Virhe: Käytettyä merkistökoodausta ei pystytä tunnistamaan - + file %s successfully created. tiedoston %s luominen onnistui. @@ -1972,32 +1997,32 @@ Luo portaat - + Length Pituus - + Error: The base shape couldn't be extruded along this tool object Virhe: Pohjamuotoa ei voitu puristaa pitkin tätä työkalun kohdetta - + Couldn't compute a shape Ei voitu laskea muotoa - + Merge Wall Yhdistä seinä - + Please select only wall objects Valitse vain seinäkohteita - + Merge Walls Yhdistä seinät @@ -2012,7 +2037,7 @@ Virhe laskettaessa tämän kohteen muotoa - + Create Structural System Luo rakenteellinen järjestelmä @@ -2172,7 +2197,7 @@ Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteel Korkeus (mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteel Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category Kategoria - + Key Key @@ -2207,12 +2232,12 @@ Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteel Arvo - + Unit Yksikkö - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteel Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteel Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Viiste - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Siirtymä @@ -2422,59 +2447,59 @@ Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteel Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Ovi - + Hinge Sarana - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. Uusi kerros - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Keskikohta - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Vasen + + + + Right + Oikea + + + + Use sketches + Use sketches + + + + Structure + Rakenne + + + + Window + Ikkuna + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Tarkistaa valitut objektit ongelmien varalta - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - IFC selain - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Yhdistä seinät - + Merges the selected walls, if possible Yhdistää valitut seinät, jos mahdollista @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Osan taso - + Creates a section plane object, including the selected objects Luo lohkotaso-objektin ottaen mukaan valitut objektit @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Sijainti - + Creates a site object including selected objects. Luo objektin sijainnin, sisältäen valitut objektit. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Rakenne - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Luo rakenne-objektin piirrosta tai valitusta objektista (sketsi, lanka, pinta tai monitahokas) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Tutkimus - + Starts survey Aloittaa tutkimuksen @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Näytä tai piilota IFC Brep lippu - + Force an object to be exported as Brep or not Pakota kohde vietäväksi Brep -muodossa tai ei @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Ikkuna - + Creates a window object from a selected object (wire, rectangle or sketch) Luo ikkunaobjektin valitusta objektista (lanka, suorakaide tai luonnos) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. Läpinäkyvyys: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Jotkut IFC katseluohjelmat eivät pidä kohteiden viemisestä puristeina. Tämän avulla voit pakottaa kaikki kohteet vietäväksi BREP geometriassa. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Paksuus - + Force export as Brep Pakota vienti Brep muodossa @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Vientiasetukset @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Erota monikerroksiset seinät - + Warning, experimental feature! Varoitus, kokeellinen ominaisuus! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Sovita näkymään tuotaessa - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Viivan väri - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.qm b/src/Mod/Arch/Resources/translations/Arch_fil.qm index b696bbcb09..51ecec0f51 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fil.qm and b/src/Mod/Arch/Resources/translations/Arch_fil.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.ts b/src/Mod/Arch/Resources/translations/Arch_fil.ts index e641d8d49d..232155035f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fil.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fil.ts @@ -44,12 +44,12 @@ Ang bagay na i-cloning ng bahaging ito - + Other shapes that are appended to this object Iba pang hugis na naidagdag sa bagay na ito - + Other shapes that are subtracted from this object Iba pang hugis na naibawas sa bagay na ito @@ -79,7 +79,7 @@ Ang lugar nang lahat ng patayong mukha ng bagay na ito - + The area of the projection of this object onto the XY plane Ang lugar ng projection ng bagay na ito papunta sa XY plane @@ -114,7 +114,7 @@ Ang nakalkulang kabuuang sukat ng sahig ng palapag na ito - + The placement of this object Ang kinatatayuan ng mga bagay na ito @@ -144,12 +144,12 @@ Ang pag-ikot ng mga propayl sa palibot ng eksturyon ng aksis - + The length of this element, if not based on a profile Ang haba ng elementong ito, ay kung hindi naka base sa propayl - + The width of this element, if not based on a profile Ang lapad ng elementong ito, kung hindi naka base sa profile @@ -194,22 +194,22 @@ Ang lugar ng panel na ito - + The facemaker type to use to build the profile of this object Ang uri ng facemaker na gagamitin para sa pagbuo ng profile ng bagay na ito - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ang normal na direksyon ng extrusion ng bagay na ito (keep (0,0,0) para sa automatic normal) - + The linked object Ang naka-link na bagay - + The line width of the rendered objects Ang lapad ng linya ng rendered na mga bagay @@ -349,7 +349,7 @@ Ang tugatog ng elementong ito - + The structural nodes of this element Ang estruktural node ng elementong ito @@ -614,132 +614,132 @@ Ang spreadsheet upang maemprenta ang mga resulta - + If false, non-solids will be cut too, with possible wrong results. Kung mali, ang mga di-solido ay pumutol din, na may posibleng mga maling resulta. - + The display length of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The display height of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The size of the arrows of this section plane Ang sukat ng palaso sa sekyon na ito ay patag - + Show the cut in the 3D view Ipakita ang hiwa sa tatlong dimensyong tanaw - + The rendering mode to use Ang maglalapat sa paraan ng paggamit - + If cut geometry is shown or not Kapag hiniwa ang heometriya ito ba ay magpapakita o hindi - + If cut geometry is filled or not Kapag hiniwa ang heometriya ito ba ay tambak o hindi - + The size of the texts inside this object Ang sukat ng mga teksto sa loob ng bagay na ito - + If checked, source objects are displayed regardless of being visible in the 3D model Kapag tsek, ang pinagmulan ng bagay ay ipamalas ng hindi alintana ang pagiging tatlong dimensyong modelo na nakikita - + The base terrain of this site Ang pinakamababa na potograpiya sa sayt na ito - + The postal or zip code of this site Ang poste o kaya haginit na kodigo sa sayt na ito - + The city of this site Ang siyudad sa sayt na ito - + The country of this site Ang bansa sa sayt na ito - + The latitude of this site Ang latitud sa sayt na ito - + Angle between the true North and the North direction in this document Anggulo sa pagitan ng totoong hilaga at ang hilagang direksyon ng dokumentong ito - + The elevation of level 0 of this site Ang layog ng antas 0 sa sayt na ito - + The perimeter length of this terrain Ang haba ng paligid ng potograpiyang ito - + The volume of earth to be added to this terrain Ang dami ng mundo na idinagdag sa potograpiya na ito - + The volume of earth to be removed from this terrain Ang dami ng mundo na tinanggal sa potograpiya na ito - + An extrusion vector to use when performing boolean operations Ang ekstursyong bektor na gamit sa pagganap sa operasyon ng bolyan - + Remove splitters from the resulting shape Tanggalin ang nabiak sa resulta ng hugis - + Show solar diagram or not Ipakita ang plano ng solar o hindi - + The scale of the solar diagram Ang isakala ng plano ng solar - + The position of the solar diagram Ang posisyon ng plano ng solar - + The color of the solar diagram Ang kulay ng plano ng solar @@ -785,81 +785,76 @@ - A zone this space is part of - Ang pook na puwang na ito ay parte ng - - - The number of people who typically occupy this space Ang bilang ng mga taong karaniwang sumakop sa puwang na ito - + The electric power needed to light this space in Watts Ang kapangyarihan ng kuryente ay kailangang mapailaw ang mga puwang na ito sa wats - + The electric power needed by the equipment of this space in Watts Ang kapangyarihan ng kuryente ay kailangang sa mga kagamitan sa luagar na ito sa wats - + If True, Equipment Power will be automatically filled by the equipment included in this space Kung totoo, ang kagamitang kapangyarihan ay awtomatikong napuno ng mga kagamitan na kasama sa lugar na ito - + The type of air conditioning of this space Ang uri ng erkon sa espasyong ito - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Ang teksto upang ipakita ay. Gamitin ang $area, $label, $tag, $floor, $walls, $ceiling upang ipasok ang kani kanilang datus - + The name of the font Ang pangalan ng titik - + The color of the area text Ang kulay ng lugar ng teksto - + The size of the text font Ang sukat ng teksto ng titik - + The size of the first line of text Ang sukat ng unang linya ng teksto - + The space between the lines of text Ang espasyo sa pagitan ng mga linya ng teksto - + The position of the text. Leave (0,0,0) for automatic position Ang posisyon ng teksto ay. Iwanan ng (0,0,0) para sa awtomatikong posisyon - + The justification of the text Ang ikaaaring-ganap ng teksto - + The number of decimals to use for calculated texts Ang bilang ng mga desimal na gagamitin para sa kinakalkula na mga teksto - + Show the unit suffix Ipakita ang suffix ng unit @@ -939,102 +934,102 @@ Ang offset sa pagitan ng hangganan ng hagdan at kayarian - + An optional extrusion path for this element Isang opsyonal na landas ng pagpilit para sa sangkap na ito - + The height or extrusion depth of this element. Keep 0 for automatic Ang tugatog o pagpilit ng lalim ng elementong ito. Panatilihin ang 0 para sa awtomatikong - + A description of the standard profile this element is based upon Isang paglalarawan ng karaniwang profile elementong ito ay batay sa - + Offset distance between the centerline and the nodes line I-offset ang distansya sa pagitan ng centerline at node line - + If the nodes are visible or not Kung ang mga node ay nakikita o hindi - + The width of the nodes line Ang lawig ng linya ng node - + The size of the node points Ang laki ng mga puntos ng noda - + The color of the nodes line Ang kulay ng mga linya ng node - + The type of structural node Ang uri ng estruktural noda - + Axes systems this structure is built on Ang mga sistema ng Axes na istraktura na ito ay itinayo - + The element numbers to exclude when this structure is based on axes Ang mga numero ng elemento upang ibukod kapag ang kayarian na ito ay batay sa mga axes - + If true the element are aligned with axes Kung totoo ang mga elemento ay nakaayon sa mga palakol - + The length of this wall. Not used if this wall is based on an underlying object Ang haba ng pader na ito ay. Wag gamitin kapag ang pader ay nakabase sa nasa-ilalim na bagay - + The width of this wall. Not used if this wall is based on a face Ang lawak ng pader na ito. Hindi ginamit kung ang pader na ito ay batay sa isang mukha - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Ang taas ng pader na ito. Panatilihin ang 0 para sa awtomatikong. Hindi ginamit kung ang pader na ito ay batay sa isang solid - + The alignment of this wall on its base object, if applicable Ang pag-pila ng pader na ito sa base object nito, kung naaangkop - + The face number of the base object used to build this wall Ang harapang bilang ng base object na ginamit upang itayo ang pader na ito - + The offset between this wall and its baseline (only for left and right alignments) Ang offset sa pagitan ng pader na ito at pangunahing linya nito (para lamang sa kaliwa at kanang alignment) - + The normal direction of this window Ang normal na tutunguan ng window na ito - + The area of this window Ang lugar ng bintana na ito @@ -1049,7 +1044,7 @@ Isang hindi sapilitanna karagdagang pagkakalagay upang idagdag sa profile bago extruding ito - + Opens the subcomponents that have a hinge defined Binubuksan ang mga subcomponent na tinukoy ng bisagra @@ -1089,12 +1084,12 @@ Ang listahan ng mga hanay thicknesses - + The line color of the projected objects Ang kulay ng linya ng inaasahang layunin - + The color of the cut faces (if turned on) Ang kulay ng mga mukha ng cut (kung naka-on) @@ -1104,7 +1099,7 @@ Ang overlap ng stringers sa itaas ng ibaba ng treads - + The number of the wire that defines the hole. A value of 0 means automatic Ang bilang ng kawad na tumutukoy sa butas. Ang isang halaga ng 0 ay nangangahulugang awtomatiko @@ -1194,7 +1189,7 @@ Ang custom spacing ng rebar - + Shape of rebar Hugis ng rebar @@ -1204,17 +1199,17 @@ I-flip ang direksyon sa bubong kung pumapasok sa maling paraan - + Shows plan opening symbols if available Ipinapakita ang mga simbolo ng pagbubukas ng plano kung magagamit - + Show elevation opening symbols if available Ipakita ang mga simbolo ng pagbubukas ng elevation kung magagamit - + The objects that host this window Ang mga bagay na nag-aanya sa mga bintanang ito @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Mga component @@ -1717,12 +1742,12 @@ Gumawa ng aksis - + Remove Ihiwalay - + Add Magdugtong @@ -1832,87 +1857,87 @@ Tingin ng mga - + Create Section Plane Gumawa ng mga bahaging patag - + Create Site Gumawa ng sayt - + Create Structure Gunawa ng istraktura - + Create Wall Gumawa ng pader - + Width Lapad - + Height Taas - + Error: Invalid base object Mali: Walang bisang patungan ng mga bagay - + This mesh is an invalid solid Ang matang ito ay imbalidong solido - + Create Window Gumawa ng bintana - + Edit I-edit - + Create/update component Gumawa ng/bagong bahagi - + Base 2D object Patungan ng 2D na mga bagay - + Wires Mga kable - + Create new component Gumawa ng mga bagong bahagi - + Name Pangalan - + Type Uri - + Thickness Kapal @@ -1922,7 +1947,7 @@ Mali: Hindi matukoy ang karakter ng pagkakainkowd - + file %s successfully created. matagumpay na pagkakagawa sa payl %s. @@ -1972,32 +1997,32 @@ Gumawa ng mga Hagdanan - + Length Haba - + Error: The base shape couldn't be extruded along this tool object Mali: Ang hugis ng patungan ay hindi magiging akma sa kahabaan ng kasangkapan na mga bagay - + Couldn't compute a shape Hindi makwenta ang isang hugis - + Merge Wall Pinagsamang Pader - + Please select only wall objects Pakiusap pumili lamang ng mga bagay sa pader - + Merge Walls Pinagsamang Pader @@ -2012,7 +2037,7 @@ Mali ang pagkakakwenta sa hugis ng mga bagay na ito - + Create Structural System Gumawa ng sistema para sa mga istruktura @@ -2172,7 +2197,7 @@ Kung Run = 0 pagkatapos ay Patakbuhin ang Run upang ang taas ay pareho ang isa b Taas (mm) - + Create Component Gumawa ng mga sangkap @@ -2187,17 +2212,17 @@ Kung Run = 0 pagkatapos ay Patakbuhin ang Run upang ang taas ay pareho ang isa b Ang mga pader ay nakabase lang sa mga parte ng mga bagay sa mata - + Set text position Magtakda ng mga posisyon ng teksto - + Category Kategorya - + Key Susi @@ -2207,12 +2232,12 @@ Kung Run = 0 pagkatapos ay Patakbuhin ang Run upang ang taas ay pareho ang isa b Halaga - + Unit Unit - + Create IFC properties spreadsheet Gumawa ng katangian ng spreadsheet @@ -2242,7 +2267,7 @@ Kung Run = 0 pagkatapos ay Patakbuhin ang Run upang ang taas ay pareho ang isa b Gumawa ng panig na pelyigo - + Facemaker returned an error Ang taga-ayos na nagbalik ng mali @@ -2267,137 +2292,137 @@ Kung Run = 0 pagkatapos ay Patakbuhin ang Run upang ang taas ay pareho ang isa b Gumawa ng mga koneksyon - + Precast elements Pagbubuo ng elemento - + Slab type Uri ng laha - + Chamfer Chamfer - + Dent length Haba ng yupi - + Dent width Lapad ng yupi - + Dent height Taas ng yupi - + Slab base Patungan ng laha - + Number of holes Bilang ng mga butas - + Major diameter of holes Pangunahing diyametro ng mga butas - + Minor diameter of holes Munting diyametro ng mga butas - + Spacing between holes Epasyo sa pagitan ng mga butas - + Number of grooves Bilang ng mga ukit - + Depth of grooves Lalim ng mga ukit - + Height of grooves Taas ng mga ukit - + Spacing between grooves Epasyo sa pagitan ng mga ukit - + Number of risers Bilang ng lawak - + Length of down floor Haba ng pababa sa sahig - + Height of risers Taas ng lawak - + Depth of treads Lalim ng mga yapak - + Precast options Pagpipilian ng ihahagis - + Dents list Listahan ng mga yupi - + Add dent Dagdagan ang yupi - + Remove dent Tanggalin ang mga yupi - + Slant Tagilid - + Level Antas - + Rotation Pag-ikot - + Offset Tabingi @@ -2422,58 +2447,58 @@ Kung Run = 0 pagkatapos ay Patakbuhin ang Run upang ang taas ay pareho ang isa b Talaan - + There is no valid object in the selection. Site creation aborted. Ang mga bagay na imbalido ay wala sa mga pagpipilian. Naudlot ang pagkakagawa sa sayt. - + Node Tools Mga kasangkapan sa noda - + Reset nodes I-reset ang mga noda - + Edit nodes I-edit ang mga noda - + Extend nodes Pahabain ang mga noda - + Extends the nodes of this element to reach the nodes of another element Pahabain ang mga noda sa elementong ito upang maabot ang mga noda ng ibang elemento - + Connect nodes Ikonekta ang mga noda - + Connects nodes of this element with the nodes of another element Ikonekta ang mga noda sa elementong ito kasama ang mga noda isa ibang elemento - + Toggle all nodes Itagel ang lahat ng noda - + Toggles all structural nodes of the document on/off I-tagel ang lahat ng nayari na noda sa mga bukas/sarado na dokumento - + Intersection found. Natagpuan ang interseksyon. @@ -2485,22 +2510,22 @@ Site creation aborted. Pintuan - + Hinge Bisagra - + Opening mode Bukas na kalakaran - + Get selected edge Kuhain ang napiling talim - + Press to retrieve the selected edge Pindutin para maibilaik ang mga napiling bahagi ng @@ -2530,17 +2555,17 @@ Site creation aborted. Bagong latag - + Wall Presets... Pagkakagawa sa pader... - + Hole wire Butas ng kable - + Pick selected Pumili ng napili @@ -2625,17 +2650,17 @@ Site creation aborted. Ang bagay na ito ay walang harap - + Space boundaries Mga hangganan ng puwang - + Error: Unable to modify the base object of this wall Error: Hindi ma-modify ang base bagay ng pader na ito - + Window elements Mga pasimulang aral ng window @@ -2747,7 +2772,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2930,47 +2955,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Sentro - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2981,77 +3006,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3091,7 +3116,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3101,7 +3126,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Matagumpay na naimport @@ -3117,45 +3142,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Idagdag ang mga napili - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Kaliwa + + + + Right + Kanan + + + + Use sketches + Use sketches + + + + Structure + Istraktura + + + + Window + Window + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3368,21 +3508,16 @@ You can change that in the preferences. Checks the selected objects for problems Para sa mga problema tsekan ang mga napiling bagay - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Kopya ng mga sangkap - + Clones an object as an undefined architectural component Gumawa ng kopya ng mga bagay para sa mga arkitektura na sangkap na hindi naipaliwanag @@ -3403,12 +3538,12 @@ You can change that in the preferences. Arch_Component - + Component Isa sa bumubuò - + Creates an undefined architectural component Lumilikha ng hindi natukoy na arkitektural na bahagi @@ -3442,12 +3577,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3541,23 +3676,15 @@ You can change that in the preferences. Ang indeks ng mukha para itago ang - - Arch_IfcExplorer - - - Ifc Explorer - Manggagalugad ng Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Gumawa ng IFC spreadsyit... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3586,12 +3713,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Pinagsamang Pader - + Merges the selected walls, if possible Kung maaring pagsamahin ang mga napiling haligi @@ -3797,12 +3924,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Patag na bahagi - + Creates a section plane object, including the selected objects Gumawa ng isang patag na bahagi na bagay, kabilang ang mga bagay na napili @@ -3823,12 +3950,12 @@ You can change that in the preferences. Arch_Site - + Site Sayt - + Creates a site object including selected objects. Gumawa ng isang bagay sa sayt kabilang ang mga napiling bagay. @@ -3875,12 +4002,12 @@ You can change that in the preferences. Arch_Structure - + Structure Istraktura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Gumawa ng istraktura na mga bagay na nag mula sa simula o mula sa mga bagay na pagpippilian (disenyo, kable, mukha o solido) @@ -3888,12 +4015,12 @@ You can change that in the preferences. Arch_Survey - + Survey Pagsisiyasat - + Starts survey Simulan ang pagsisiyasat @@ -3901,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag I-tagel ang IFC at brep na watawat - + Force an object to be exported as Brep or not Pwersahin ang mga bagay upang mapalabas bilang brep o kaya ay hindi @@ -3914,12 +4041,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents I-tagel ang iba't ibang bahagi - + Shows or hides the subcomponents of this object Ipakita o itago ang mga iba't ibang bahagi ng mga bagay na ito @@ -3940,12 +4067,12 @@ You can change that in the preferences. Arch_Window - + Window Window - + Creates a window object from a selected object (wire, rectangle or sketch) Gumawa ng isang bintana ng mga bagay na nag mula sa simula o mula sa mga bagay na pagpipilian (kable, parihaba o disenyo) @@ -4216,7 +4343,7 @@ You can change that in the preferences. Draft - + Writing camera position Pagsusulat ng posisyon ng kamera @@ -4652,7 +4779,7 @@ You can change that in the preferences. Aninag: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Ang ilang mga manonood ng IFC ay hindi nagugustuhan ng mga bagay na na-export bilang mga extrusions. Gamitin ito upang pilitin ang lahat ng mga bagay na i-export bilang BREP geometry. @@ -4692,7 +4819,7 @@ You can change that in the preferences. Kapal - + Force export as Brep Pilitin na i-angkat bilang isang Brep @@ -4722,7 +4849,7 @@ You can change that in the preferences. DAE - + Export options I-eksport ang mga opsyon @@ -4932,22 +5059,22 @@ You can change that in the preferences. Payagan ang mga apatan - + Use triangulation options set in the DAE options page Gamitin ang mga opsyon ng mga tatsulok na magtakda ng mga pahina ng mga opsyon ng DAE - + Use DAE triangulation options Gamitin ang mga opsyon sa tatsulok na DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Umukit ng mga hugis na hindi kumakatawan bilang ukit sa IFC na nabubulok na tapyas sa patag. Kung ito ay susuriin, Ilan sa mga karagdagan na nakuwenta ay tapos na upang sumali sa koplanar na aspeto. - + Join coplanar facets when triangulating Sumali sa koplanar na aspeto habang nag huhugis tatsulok @@ -4987,12 +5114,12 @@ You can change that in the preferences. I-import ang mga katangian ng Ifc sa ispredsyet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Kapag ang pag-luwas ng mga bagay nang walang UID, ang nabuong UID ay maiimbak sa loob ng FreeCAD object para sa muling paggamit sa susunod na ang bagay ay na-export, na nagbibigay ng mas maliit na mga diffs sa pagitan ng mga bersyon - + Store IFC universal ID in FreeCAD objects I-imbak ang pangkalahatang IFC ID sa FreeCAD na mga bagay @@ -5062,17 +5189,17 @@ You can change that in the preferences. Nahati ang maraming patong na pader - + Warning, experimental feature! Babala sa, pang-eksperimentong tampok! - + Use IfcOpenShell serializer if available Gamitin ang IfcOpenShell na tag tatak kung pwede - + Export 2D objects as IfcAnnotations I-export ang 2D na bagay bilang IfcAnnotations @@ -5097,12 +5224,12 @@ You can change that in the preferences. Ipagkasya habang ini-import - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Kung ito ay nasuri, ang lahat ng mga katangian ng FreeCAD object ay maiimbak sa loob ng mga na-export na bagay, na nagbibigay-daan upang muling likhain ang isang buong parametric na modelo sa reimport. - + Export full FreeCAD parametric model I-export ang buong FreeCad at parametrikong modelo @@ -5157,22 +5284,22 @@ You can change that in the preferences. Listahan sa Hindi kasali: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5237,14 +5364,49 @@ You can change that in the preferences. Kulay ng linya - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index 34e470eb64..ab8bb9a415 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 0a6803e42d..00701c4083 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -44,12 +44,12 @@ L’objet que ce composant clone - + Other shapes that are appended to this object Autres formes ajoutées à cet objet - + Other shapes that are subtracted from this object Autres formes soustraites de cet objet @@ -79,7 +79,7 @@ L'aire géomérique de toutes les faces verticales de cet objet - + The area of the projection of this object onto the XY plane Surface projetée de l'objet sur un plan XY @@ -114,7 +114,7 @@ La surface de plancher calculée de cet étage - + The placement of this object Le positionnement de cet objet @@ -144,12 +144,12 @@ La rotation du profil autour de son axe d’extrusion - + The length of this element, if not based on a profile La longueur de cet élément, si il n'est pas basé sur un profil - + The width of this element, if not based on a profile La largeur de cet élément, si il n'est pas basé sur un profil @@ -194,22 +194,22 @@ La surface du panneau - + The facemaker type to use to build the profile of this object Le type de générateur de face à utiliser pour créer le profil de cet objet - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direction d'extrusion normale de cet objet (mettre (0,0,0) pour normale automatique) - + The linked object L’objet lié - + The line width of the rendered objects La largeur de la ligne des objets rendus @@ -349,7 +349,7 @@ La hauteur de cet élément - + The structural nodes of this element Les nœuds structurels de cet élément @@ -614,132 +614,132 @@ La feuille de calcul où imprimer les résultats - + If false, non-solids will be cut too, with possible wrong results. Si « false », les éléments non pleins seront également coupés, avec de possibles mauvais résultats. - + The display length of this section plane La longueur d'affichage de ce plan de coupe - + The display height of this section plane La hauteur affichée de ce plan de coupe - + The size of the arrows of this section plane La taille des flèches de ce plan de coupe - + Show the cut in the 3D view Montrer la coupe dans la vue 3D - + The rendering mode to use Le mode de rendu à utiliser - + If cut geometry is shown or not Si la géométrie de la coupe est affichée ou non - + If cut geometry is filled or not Si la géométrie de la coupe est remplie ou non - + The size of the texts inside this object La taille des textes à l’intérieur de cet objet - + If checked, source objects are displayed regardless of being visible in the 3D model Si cochée, les objets source sont affichés quelle que soit leur visibilité dans le modèle 3D - + The base terrain of this site La forme de base de ce site - + The postal or zip code of this site Le code postal ou zip de cet emplacement - + The city of this site La ville de cet emplacement - + The country of this site Le pays de cet emplacement - + The latitude of this site La latitude de ce site - + Angle between the true North and the North direction in this document Angle entre le Nord vrai et la direction du Nord dans ce document - + The elevation of level 0 of this site L’altitude du niveau 0 de ce site - + The perimeter length of this terrain Le périmètre de ce terrain - + The volume of earth to be added to this terrain Le volume de terre à ajouter à ce type de terrain - + The volume of earth to be removed from this terrain Le volume de terre à enlever de ce terrain - + An extrusion vector to use when performing boolean operations Un vecteur d’extrusion à utiliser lors de l’exécution des opérations booléennes - + Remove splitters from the resulting shape Retirez les répartiteurs de la forme résultante - + Show solar diagram or not Afficher le diagramme solaire ou non - + The scale of the solar diagram L’échelle du diagramme solaire - + The position of the solar diagram La position du diagramme solaire - + The color of the solar diagram La couleur du diagramme solaire @@ -785,81 +785,76 @@ - A zone this space is part of - Une zone dont cet espace fait partie - - - The number of people who typically occupy this space Le nombre de personnes qui occupent généralement cet espace - + The electric power needed to light this space in Watts La puissance électrique en Watts nécessaire pour éclairer cet espace - + The electric power needed by the equipment of this space in Watts La puissance électrique nécessaire par les équipements dans cet espace en Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Si Vrai, la puissance des équipements sera automatiquement remplie par cette des équipements dans cet espace - + The type of air conditioning of this space Le type de climatisation de cet espace - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Le texte à afficher. Utilisez $area, $label, $tag, $floor, $walls, $ceiling pour insérer les données respectives - + The name of the font Le nom de la police - + The color of the area text La couleur de la zone de texte - + The size of the text font La taille de la police de texte - + The size of the first line of text La taille de la première ligne de texte - + The space between the lines of text L'espace entre les lignes de texte - + The position of the text. Leave (0,0,0) for automatic position La position du texte. Laisser (0,0,0) pour un positionnement automatique - + The justification of the text La justification du texte - + The number of decimals to use for calculated texts Le nombre de décimales à utiliser pour les textes calculés - + Show the unit suffix Afficher le suffixe de l'unité @@ -939,102 +934,102 @@ Le décalage entre la bordure de l’escalier et la structure - + An optional extrusion path for this element Un chemin d'extrusion optionnel pour cet élément - + The height or extrusion depth of this element. Keep 0 for automatic La hauteur ou profondeur d’extrusion de cet élément. Laisser à 0 pour réglage automatique - + A description of the standard profile this element is based upon Une description du profil standard sur lequel cet élément est fondé - + Offset distance between the centerline and the nodes line Décalage entre la ligne centrale et la ligne des nœuds - + If the nodes are visible or not Si les nœuds sont visibles ou pas - + The width of the nodes line La largeur de la ligne des nœuds - + The size of the node points La taille des nœuds - + The color of the nodes line La couleur de la ligne de nœuds - + The type of structural node Le type du nœud - + Axes systems this structure is built on Les systèmes d'axes sur lesquels cette structure est construite - + The element numbers to exclude when this structure is based on axes Le nombre d’élément à exclure lorsque cette structure est basée sur les axes - + If true the element are aligned with axes Si VRAI, l'élément est aligné avec les axes - + The length of this wall. Not used if this wall is based on an underlying object La longueur de ce mur. Pas utilisé si ce mur est basé sur un objet sous-jacent - + The width of this wall. Not used if this wall is based on a face La largeur de ce mur. Pas utilisé si ce mur est basé sur une surface - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid La hauteur de ce mur. Laisser à 0 pour automatique. Inutilisé si ce mur est basé sur un solide - + The alignment of this wall on its base object, if applicable L’alignement de ce mur sur son objet de base, le cas échéant - + The face number of the base object used to build this wall Le numéro de la surface de l’objet de base utilisé pour construire ce mur - + The offset between this wall and its baseline (only for left and right alignments) Le décalage entre ce mur et sa ligne de référence (uniquement pour les alignements à gauche et à droite) - + The normal direction of this window La direction normale à cette fenêtre - + The area of this window L'aire de cette fenêtre @@ -1049,7 +1044,7 @@ Un placement additionnel facultatif à ajouter au profil avant de l'extruder - + Opens the subcomponents that have a hinge defined Ouvre les sous-composants qui ont une charnière définie @@ -1089,12 +1084,12 @@ La liste des épaisseurs de couche - + The line color of the projected objects La couleur de la ligne des objets projetés - + The color of the cut faces (if turned on) La couleur des faces coupées (si activé) @@ -1104,7 +1099,7 @@ Le chevauchement des poutres au-dessus du bas des semelles - + The number of the wire that defines the hole. A value of 0 means automatic Le numéro du fil qui définit le trou. Une valeur de 0 signifie automatique @@ -1194,7 +1189,7 @@ L’espacement personnalisé de l'armature - + Shape of rebar Forme de l'armature @@ -1204,17 +1199,17 @@ Inverser la direction de toit si elle va dans le mauvais sens - + Shows plan opening symbols if available Affiche les symboles de début du plan si disponible - + Show elevation opening symbols if available Affiche les symboles d'élévation du début du plan s’ils sont disponibles - + The objects that host this window Les objets qui supportent cette fenêtre @@ -1269,12 +1264,12 @@ Le niveau du point (0,0,0) de cet étage - + The shape of this object La forme de cet objet - + The line width of this object La largeur de la ligne des objets @@ -1414,47 +1409,47 @@ Si vrai, les couleurs du fichier lié resteront mises à jour - + The objects that must be considered by this section plane. Empty means the whole document. Les objets qui doivent être pris en compte par ce plan de coupe. Vide signifie tous les objets du document. - + The transparency of this object La transparence de cet objet - + The color of this object La couleur de cet objet - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distance entre le plan de coupe et de la vue réelle coupé (cela garde une valeur très faible mais pas nulle) - + The street and house number of this site, with postal box or apartment number if needed La rue et numéro de cet emplacement, avec le numéro de boîte postale ou d'appartement si nécessaire - + The region, province or county of this site La région, la province ou le departament de ce site - + A url that shows this site in a mapping website Une Url qui indique ce site dans un site de cartographie - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Un décalage optionnel entre l'origine du modèle (0,0,0) et le point indiqué par les géocoordonnées - + Specifies if this space is internal or external Indique si cet espace est interne ou externe @@ -1504,200 +1499,230 @@ Le « schéma de gauche » de tous les segments de l’escalier - + Enable this to make the wall generate blocks Cocher ceci pour rendre le mur à générer les blocs - + The length of each block La longueur de chaque bloc - + The height of each block La hauteur de chaque bloc - + The horizontal offset of the first line of blocks Le décalage horizontal de la première ligne de blocs - + The horizontal offset of the second line of blocks Le décalage horizontal de la deuxième ligne de blocs - + The size of the joints between each block La taille des joints entre chaque bloc - + The number of entire blocks Le nombre de blocs entiers - + The number of broken blocks Le nombre de blocs cassés - + The components of this window Les composants de cette fenêtre - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. La profondeur du trou qui fait de cette fenêtre dans son objet hôte. Si 0, la valeur sera calculée automatiquement. - + An optional object that defines a volume to be subtracted from hosts of this window Un objet facultatif qui définit un volume à soustraire des hôtes de cette fenêtre - + The width of this window La largeur de cette fenêtre - + The height of this window La hauteur de cette fenêtre - + The preset number this window is based on Cette fenêtre est basée sur le numéro de préréglage - + The frame size of this window La taille de la trame de cette fenêtre - + The offset size of this window La décalage taille de cette fenêtre - + The width of louvre elements La largeur des éléments du louvre - + The space between louvre elements L’espace entre les éléments du louvre - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Le numéro du fil qui définit le trou. Si 0, la valeur sera calculée automatiquement Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Spécifie si le déplacement de cet objet déplace sa base à la place A single section of the fence - A single section of the fence + Une seule section de la clôture A single fence post - A single fence post + Un seul poteau de clôture The Path the fence should follow - The Path the fence should follow + Le chemin que la clôture doit suivre The number of sections the fence is built of - The number of sections the fence is built of + Le nombre de sections avec lesquelles la clôture est construite The number of posts used to build the fence - The number of posts used to build the fence + Le nombre de poteaux utilisés pour construire la clôture - + The type of this object - The type of this object + Le type de cet objet IFC data - IFC data + Données IFC IFC properties of this object - IFC properties of this object + Propriétés IFC de cet objet - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + La description des attributs IFC n'est pas encore implémentée + + + + If True, resulting views will be clipped to the section plane area. + Si vrai, les vues résultantes seront restreintes à la zone du plan de section. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Si vrai, la couleur des objets sera utilisée pour remplir des zones coupées. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Quand défini sur 'Vrai Nord' toute la géométrie sera pivotée pour correspondre au vrai nord de ce site - + + Show compass or not + Afficher la boussole ou non + + + + The rotation of the Compass relative to the Site + La rotation de la Boussole par rapport au Site + + + + The position of the Compass relative to the Site placement + La position de la Boussole par rapport à l'emplacement du Site + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Mettre à jour la valeur de la déclinaison en fonction de la rotation de la boussole The thickness of the risers - The thickness of the risers + L’épaisseur des contre-marches The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + Le « schéma de droite » de tous les segments de l’escalier + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Composants @@ -1717,12 +1742,12 @@ Création d'un système d'axes - + Remove Enlever - + Add Ajouter @@ -1832,87 +1857,87 @@ Vue de - + Create Section Plane Création d'un plan de coupe - + Create Site Création d'un Site - + Create Structure Création d'une structure - + Create Wall Création d'un mur - + Width Largeur - + Height Hauteur - + Error: Invalid base object Erreur : Objet de base non valide - + This mesh is an invalid solid Ce maillage n'est pas un solide valide - + Create Window Création d'une fenêtre - + Edit Éditer - + Create/update component Créer ou mettre le composant à jour - + Base 2D object Objet 2D de base - + Wires Filaires - + Create new component Créer un nouveau composant - + Name Nom - + Type Type - + Thickness Épaisseur @@ -1922,7 +1947,7 @@ Erreur : impossible de déterminer l'encodage de caractères - + file %s successfully created. Le fichier %s a été correctement créé. @@ -1972,32 +1997,32 @@ Créer un escalier - + Length Longueur - + Error: The base shape couldn't be extruded along this tool object Erreur : la forme support ne peut pas être extrudée le long de cet objet - + Couldn't compute a shape Forme incalculable - + Merge Wall Fusionner le mur - + Please select only wall objects Veuillez sélectionner uniquement des objets Murs - + Merge Walls Fusionner des murs @@ -2012,7 +2037,7 @@ Erreur lors du calcul de la forme de cet objet - + Create Structural System Créer un système structurel @@ -2172,7 +2197,7 @@ Si Largeur = 0 alors la largeur est calculée de façon à ce que la hauteur du Hauteur (mm) - + Create Component Créer un composant @@ -2187,17 +2212,17 @@ Si Largeur = 0 alors la largeur est calculée de façon à ce que la hauteur du Les murs ne peuvent être créés qu'à l'aide d'objets Part ou Mesh - + Set text position Position du texte - + Category Catégorie - + Key Clé @@ -2207,12 +2232,12 @@ Si Largeur = 0 alors la largeur est calculée de façon à ce que la hauteur du Valeur - + Unit Unité - + Create IFC properties spreadsheet Création d'une feuille de calcul de propriétés Ifc @@ -2242,7 +2267,7 @@ Si Largeur = 0 alors la largeur est calculée de façon à ce que la hauteur du Créer la Feuille de Panneau - + Facemaker returned an error FaceMaker a retouné une erreur @@ -2267,137 +2292,137 @@ Si Largeur = 0 alors la largeur est calculée de façon à ce que la hauteur du Créez le connecteur - + Precast elements Éléments préfabriqués - + Slab type Type de dalle - + Chamfer Chanfrein - + Dent length Longueur de l'entaille - + Dent width Largeur de l'entaille - + Dent height Hauteur de l'entaille - + Slab base Dalle de base - + Number of holes Nombre de trous - + Major diameter of holes Grand diamètre des trous - + Minor diameter of holes Petit diamètre des trous - + Spacing between holes Espacement entre les trous - + Number of grooves Nombre de rainures - + Depth of grooves Profondeur des rainures - + Height of grooves Hauteur de rainures - + Spacing between grooves Espacement entre les rainures - + Number of risers Nombre de contremarches - + Length of down floor Longueur de l'étage inférieur - + Height of risers Hauteur des contremarches - + Depth of treads Profondeur des marches - + Precast options - Options de béton préfabriquées + Options de béton préfabriqué - + Dents list Liste des entailles - + Add dent Ajouter une entaille - + Remove dent Enlever une bosse - + Slant Inclinaison - + Level Niveau - + Rotation Rotation - + Offset Décalage @@ -2422,58 +2447,58 @@ Si Largeur = 0 alors la largeur est calculée de façon à ce que la hauteur du Planification - + There is no valid object in the selection. Site creation aborted. Il n’y a pas d’objet valide dans la sélection. Création de l"emplacement abandonnée. - + Node Tools Outil de nœud - + Reset nodes Réinitialiser les nœuds - + Edit nodes Modifier des nœuds - + Extend nodes Étendre les nœuds - + Extends the nodes of this element to reach the nodes of another element Étend les nœuds de cet élément pour atteindre les nœuds d’un autre élément - + Connect nodes Connecter les nœuds - + Connects nodes of this element with the nodes of another element Relie les nœuds de cet élément avec les nœuds d’un autre élément - + Toggle all nodes Activer/désactiver tous les nœuds - + Toggles all structural nodes of the document on/off Active/désactive tous les noeuds structurels du document - + Intersection found. Intersection trouvée. @@ -2485,22 +2510,22 @@ Site creation aborted. Porte - + Hinge Charnière - + Opening mode Mode d’ouverture - + Get selected edge Obtenir l’arête sélectionnée - + Press to retrieve the selected edge Appuyez sur pour récupérer l’arête sélectionnée @@ -2530,17 +2555,17 @@ Site creation aborted. Nouveau calque - + Wall Presets... Préréglages de mur... - + Hole wire Fil de trou - + Pick selected Choix sélectionné @@ -2625,17 +2650,17 @@ Site creation aborted. Cet objet n’a pas de face - + Space boundaries Limites de l’espace - + Error: Unable to modify the base object of this wall Erreur : Impossible de modifier l’objet base de ce mur - + Window elements Éléments de la fenêtre @@ -2747,7 +2772,7 @@ Création de la construction abandonnée. Tout est bon ! Aucun problème trouvé - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'objet ne possède pas l'attribut IfcProperties. Annuler la création de la feuille de calcul pour l'objet: @@ -2812,10 +2837,7 @@ Création de la construction abandonnée. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Vous pouvez mettre n'importe quoi sauf les objets suivants: Site, Construction et Sol - dans un objet sol . L'objet sol n'est pas autorisé à accepter des objets Site, Construction ou Sol. Les objets Site, Construction et Sol seront supprimés de la sélection. Vous pouvez changer cela dans les préférences. @@ -2930,47 +2952,47 @@ Création de plancher abandonnée. Aucune feuille de calcul attachée à cette nomenclature - + Section plane settings Réglage du plan de coupe - + Objects seen by this section plane: Objets vus dans ce plan de coupe : - + Section plane placement: Emplacement du plan de coupe : - + Rotate X Rotation X - + Rotate Y Rotation Y - + Rotate Z Rotation Z - + Resize Redimensionner - + Center Centre - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2978,77 +3000,77 @@ Note: You can change that in the preferences. Veuillez sélectionner uniquement les objets de Bâtiment ou rien ! Emplacement ne sont pas autorisés à accepter d’autre objet que Bâtiment. Les autres objets seront supprimés de la sélection. Vous pouvez modifier cela dans les préférences. - + Choose another Structure object: Choisir un autre objet Structure : - + The chosen object is not a Structure L’objet sélectionné n’est pas une Structure - + The chosen object has no structural nodes L’objet sélectionné n’a pas de nœud structurel - + One of these objects has more than 2 nodes Un de ces objets possède plus de 2 nœuds - + Unable to find a suitable intersection point Impossible de trouver un point d’intersection adapté - + Intersection found. Intersection trouvée. - + The selected wall contains no subwall to merge Le mur sélectionné ne contient pas de sous-mur à fusionner - + Cannot compute blocks for wall Ne peut pas calculer les blocs pour mur - + Choose a face on an existing object or select a preset Choisissez une face sur un objet existant, ou sélectionnez un paramètre prédéfini - + Unable to create component Impossible de créer le composant - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Le numéro du fil qui définit un trou dans l’objet hôte. Une valeur de zéro adoptera automatiquement le fil plus gros - + + default + défaut - + If this is checked, the default Frame value of this window will be added to the value entered here Si cette case est cochée, la valeur par défaut du cadre de cette fenêtre s’ajoutera à la valeur entrée ici - + If this is checked, the default Offset value of this window will be added to the value entered here Si cette case est cochée, la valeur par défaut du décalage de cette fenêtre s’ajoutera à la valeur entrée ici - + pycollada not found, collada support is disabled. pycollada introuvable, le support de collada est désactivé. @@ -3088,7 +3110,7 @@ Note: You can change that in the preferences. Erreur : votre version de IfcOpenShell est trop ancienne - + Successfully written Écrit avec succès @@ -3098,7 +3120,7 @@ Note: You can change that in the preferences. Une forme contenant des courbes a été trouvé : triangulation en cours - + Successfully imported Importé avec succès @@ -3108,50 +3130,162 @@ Note: You can change that in the preferences. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Vous pouvez mettre n’importe quoi sauf les objets Emplacement et Bâtiment dans un objet Bâtiment. Les objets Bâtiment ne sont pas autorisés à accepter un objet Emplacement ou Bâtiment. Les objets Site ou Bâtiment seront supprimés de la sélection. Vous pouvez modifier cela dans les préférences. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Supprimer les objets en surbrillance de la liste ci-dessus - + Add selected Ajouter la sélection - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Ajouter un(des) objet(s) sélectionné(s) au champ d'application de ce plan de coupe + + + + Rotates the plane along the X axis + Rotation du plan autour de l'axe X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Rotation du plan autour de l'axe Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Rotation du plan autour de l'axe Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Redimensionner le plan pour l'adapter aux objets de la liste ci-dessus - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Centrer le plan sur les objets de la liste ci-dessus - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Premier point de la poutre + + + + Base point of column + Point de base de la colonne + + + + Next point + Point suivant + + + + Structure options + Options de la structure + + + + Drawing mode + Mode de tracé + + + + Beam + Poutre + + + + Column + Colonne + + + + Preset + Préréglage + + + + Switch L/H + Échanger L/H + + + + Switch L/W + Échanger L/l + + + + Con&tinue + Pour&suivre + + + + First point of wall + Premier point du mur + + + + Wall options + Options du mur + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Cette liste montre tous les objets multi-matériaux de ce document. Créez-en quelques-uns pour définir les types de murs. + + + + Alignment + Alignement + + + + Left + Gauche + + + + Right + Droit + + + + Use sketches + Utiliser des croquis + + + + Structure + Structure + + + + Window + Fenêtre + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3365,21 +3499,16 @@ You can change that in the preferences. Checks the selected objects for problems Vérifie si les objets sélectionnés présentent un problème - - - Explore the contents of an IFC file - Explorer le contenu d'un fichier IFC - Arch_CloneComponent - + Clone component Composant de clone - + Clones an object as an undefined architectural component Clone un objet comme un élément architectural indéfini @@ -3400,12 +3529,12 @@ You can change that in the preferences. Arch_Component - + Component Composant - + Creates an undefined architectural component Crée un élément architectural non défini @@ -3439,14 +3568,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Barrière - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Créer un objet barrière à partir de la section sélectionnée, du poteau et du chemin @@ -3538,23 +3667,15 @@ You can change that in the preferences. Les indices de face à cacher - - Arch_IfcExplorer - - - Ifc Explorer - Explorateur IFC - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Créer une feuille de calcul Ifc... - + Creates a spreadsheet to store IFC properties of an object. Crée une feuille de calcul pour stocker les propriétés IFC d'un objet. @@ -3583,12 +3704,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Fusionner des murs - + Merges the selected walls, if possible Fusionne les murs sélectionnés, si possible @@ -3794,12 +3915,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plan de section - + Creates a section plane object, including the selected objects Crée un plan de coupe à partir des objets sélectionnés @@ -3820,12 +3941,12 @@ You can change that in the preferences. Arch_Site - + Site Site - + Creates a site object including selected objects. Crée un objet site à partir des objets sélectionnés. @@ -3872,12 +3993,12 @@ You can change that in the preferences. Arch_Structure - + Structure Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crée un objet de structure à partir de zéro ou d'un objet sélectionné (esquisse, ligne, face ou solide) @@ -3885,12 +4006,12 @@ You can change that in the preferences. Arch_Survey - + Survey Prise de côtes - + Starts survey Démarre l'étude @@ -3898,12 +4019,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Activer/désactiver le marqueur Brep IFC - + Force an object to be exported as Brep or not Force (ou non) un objet à être exporté en tant que Brep @@ -3911,12 +4032,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Activer/désactiver sous-composants - + Shows or hides the subcomponents of this object Affiche ou masque les sous-composants de cet objet @@ -3937,12 +4058,12 @@ You can change that in the preferences. Arch_Window - + Window Fenêtre - + Creates a window object from a selected object (wire, rectangle or sketch) Crée une fenêtre a partir d'un objet sélectionné (filaire, rectangle ou esquisse) @@ -4212,7 +4333,7 @@ You can change that in the preferences. Draft - + Writing camera position Écrire la position de la caméra @@ -4648,7 +4769,7 @@ You can change that in the preferences. Transparence : - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Certains visualiseurs IFC n'aiment pas les objets exportés en tant qu'extrusions. Utiliser cette fonctionnalité pour forcer tous les objets à être exportés avec une géométrie BREP. @@ -4688,7 +4809,7 @@ You can change that in the preferences. Épaisseur - + Force export as Brep Forcer l'export en Brep @@ -4718,7 +4839,7 @@ You can change that in the preferences. DAE - + Export options Options d'export @@ -4928,22 +5049,22 @@ You can change that in the preferences. Autoriser les quadrangles - + Use triangulation options set in the DAE options page Utiliser l'option de triangulation actif dans les options du DAE - + Use DAE triangulation options Utiliser les options de triangulation DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Les formes courbes qui ne peuvent pas être représentées dans un IFC sont décomposées en plusieurs facettes. Si cette case est cochée, des calculs supplémentaires seront exécutés pour joindre les facettes coplanaires. - + Join coplanar facets when triangulating Joindre les faces coplanaires pendant la triangulation @@ -4983,12 +5104,12 @@ You can change that in the preferences. Importer les propriétés Ifc dans une feuille de calcul - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Quand exportation des objets sans UID, l’UID généré sera stocké à l’intérieur de l’objet FreeCAD pour réutiliser la prochaine fois que cet objet est exporté, qui donne des petites différences entre les versions - + Store IFC universal ID in FreeCAD objects Stocker l'identifiant universel IFC dans l'objet FreeCAD @@ -5058,17 +5179,17 @@ You can change that in the preferences. Parois multicouches fendues - + Warning, experimental feature! Alerte, fonction expérimentale ! - + Use IfcOpenShell serializer if available Utiliser le sérialiseur IfcOpenShell si disponible - + Export 2D objects as IfcAnnotations Exporter des objets 2D comme IfcAnnotations @@ -5093,12 +5214,12 @@ You can change that in the preferences. Ajustement de vue lors de l’importation - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Si cette case est cochée, toutes les propriétés de l’objet FreeCAD seront stockées à l’intérieur des objets exportés, ce qui permet de recréer un modèle paramétrique complet en réimportation. - + Export full FreeCAD parametric model Exporter le modèle paramétrique complet FreeCAD @@ -5153,59 +5274,59 @@ You can change that in the preferences. Exclure la liste: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Si cette case est cochée et lorsque cela est possible, les entités similaires seront utilisées une seule fois dans le fichier. Cela peut réduire énormément la taille du fichier, mais il sera moins facilement lisible par les humains - + Reuse similar entities Réutiliser les entités similaires - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Lorsque cela est possible, les objets IFC qui sont des rectangles extrudés sont exportées comme IfcRectangleProfileDef. Toutefois, certaines autres applications ont notoirement les problèmes d’importation de cette entité. Si tel est votre cas, vous pouvez désactiver cette ici (tous les profils seront exportés sous IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Désactiver IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Définir la propriété « Déplacer la base » à Vrai par défaut IFC version - IFC version + Version d’IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + La version d’IFC changera les attributs et produits pris en charge IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Espaces Line style: - Line style: + Type de ligne : @@ -5215,17 +5336,17 @@ You can change that in the preferences. Dashed - Dashed + Tirets Dotted - Dotted + Pointillés Dashdot - Dashdot + Trait-point @@ -5233,14 +5354,49 @@ You can change that in the preferences. Couleur de ligne - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Certains types IFC tels que IfcWall ou IfcBeam ont des versions standard spéciales comme IfcWallStandardCase ou IfcBeamStandardCase. Si cette option est activée, FreeCAD exportera automatiquement ces objets comme des cas standard lorsque les conditions nécessaires seront remplies. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.qm b/src/Mod/Arch/Resources/translations/Arch_gl.qm index eb6336ad19..4c2099df11 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_gl.qm and b/src/Mod/Arch/Resources/translations/Arch_gl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index 68a1000822..c1a7dd0e15 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -44,12 +44,12 @@ O obxecto do que este compoñente é clonado - + Other shapes that are appended to this object Outras formas que están anexadas a este obxecto - + Other shapes that are subtracted from this object Outras formas que están subtraídas deste obxecto @@ -79,7 +79,7 @@ A área de tódalas caras verticais deste obxecto - + The area of the projection of this object onto the XY plane A área da proxección deste obxecto sobre o plano XY @@ -114,7 +114,7 @@ A área de chan calculada para este andar - + The placement of this object A situación deste obxecto @@ -144,12 +144,12 @@ A rotación do perfil arredor do seu eixo de extrusión - + The length of this element, if not based on a profile A lonxitude deste elemento, se non está baseado nun perfil - + The width of this element, if not based on a profile A largura deste elemento, se non está baseado nun perfil @@ -194,22 +194,22 @@ A área deste panel - + The facemaker type to use to build the profile of this object O tipo de facedor de caras para usar na construción do perfil deste proxecto - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A dirección de extrusión normal deste obxecto (manter (0,0,0) para normal automática) - + The linked object O obxecto ligado - + The line width of the rendered objects A largura da liña dos obxectos renderizados @@ -349,7 +349,7 @@ A altura deste elemento - + The structural nodes of this element Os nós estruturais deste elemento @@ -614,132 +614,132 @@ A folla de cálculo para imprimir os resultados - + If false, non-solids will be cut too, with possible wrong results. Se é falso, os non-sólidos serán cortados tamén, con posibles resultados errados. - + The display length of this section plane A lonxitude visualizada deste plano de corte - + The display height of this section plane A altura visualizada deste plano de corte - + The size of the arrows of this section plane O tamaño das frechas deste plano de corte - + Show the cut in the 3D view Amosar o corte na visualización 3D - + The rendering mode to use O xeito de renderización para usar - + If cut geometry is shown or not Se se amosa ou non a xeometría do corte - + If cut geometry is filled or not Se se enche ou non a xeometría do corte - + The size of the texts inside this object O tamaño dos textos dentro deste obxecto - + If checked, source objects are displayed regardless of being visible in the 3D model Se é marcada, os obxectos de orixe amósanse independentemente de seren visibles no modelo 3D - + The base terrain of this site O chan de base deste lugar - + The postal or zip code of this site O correo ou código postal deste lugar - + The city of this site A cidade deste lugar - + The country of this site O país deste lugar - + The latitude of this site A latitude deste lugar - + Angle between the true North and the North direction in this document Ángulo entre o Norte verdadeiro e a dirección Norte neste documento - + The elevation of level 0 of this site A elevación do nivel 0 deste lugar - + The perimeter length of this terrain A lonxitude do perímetro deste terreo - + The volume of earth to be added to this terrain O volume de terra para ser engadido a este terreo - + The volume of earth to be removed from this terrain O volume de terra para ser rexeitado deste terreo - + An extrusion vector to use when performing boolean operations Un vector de extrusión para usar cando se fan operacións booleanas - + Remove splitters from the resulting shape Desbotar divisores da forma resultante - + Show solar diagram or not Amosar ou non o diagrama solar - + The scale of the solar diagram A escala do diagrama solar - + The position of the solar diagram A posición do diagrama solar - + The color of the solar diagram A cor do diagrama solar @@ -785,81 +785,76 @@ - A zone this space is part of - Unha zona da cal forma parte este espazo - - - The number of people who typically occupy this space O número de persoas que normalmente ocupan este espazo - + The electric power needed to light this space in Watts A potencia eléctrica precisada para alumar este espazo en Watts - + The electric power needed by the equipment of this space in Watts Potencia eléctrica precisada para os equipamentos deste espazo en Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Se é Verdadeiro, Equipo de Enerxía será automaticamente cuberto polos equipamentos incluídos neste espazo - + The type of air conditioning of this space O tipo de climatización deste espazo - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data O texto para amosar. Use $area, $label, $tag, $floor, $walls, $ceiling para introducir os datos respectivos - + The name of the font O nome da fonte - + The color of the area text A cor da área de texto - + The size of the text font O tamaño da fonte do texto - + The size of the first line of text O tamaño da primeira liña do texto - + The space between the lines of text O espazado entre liñas do texto - + The position of the text. Leave (0,0,0) for automatic position A situación do texto. Deixar (0,0,0) para posición automática - + The justification of the text A xustificación do texto - + The number of decimals to use for calculated texts A cantidade de decimais a usar para textos de cálculo - + Show the unit suffix Amosar o sufixo de unidade @@ -939,102 +934,102 @@ A separación entre o bordo da escaleira e a estrutura - + An optional extrusion path for this element Un camiño de extrusión opcional para este elemento - + The height or extrusion depth of this element. Keep 0 for automatic A altura ou fondura de extrusión deste elemento. Manter 0 para automática - + A description of the standard profile this element is based upon Unha descrición do perfil estándar sobre o cal este elemento está baseado - + Offset distance between the centerline and the nodes line Distancia de separación entre a liña central e a liña de nós - + If the nodes are visible or not Se os nós son visibles ou non - + The width of the nodes line A largura da liña de nós - + The size of the node points O tamaño da liña de nós - + The color of the nodes line A cor da liña de nós - + The type of structural node O tipo de nó estrutural - + Axes systems this structure is built on Sistema de eixos sobre o que está construída esta estrutura - + The element numbers to exclude when this structure is based on axes Os números de elemento para desbotar cando esta estrutura está baseada en eixos - + If true the element are aligned with axes Se é verdadeiro, os elementos son aliñados cos eixos - + The length of this wall. Not used if this wall is based on an underlying object A lonxitude desta parede. Non se emprega se esta parede está baseada sobre un obxecto subxacente - + The width of this wall. Not used if this wall is based on a face A largura desta parede. Non se emprega se esta parede está baseada nunha cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid A altura desta parede. Manteña 0 para automática. Non usada se esta parede está baseada nun sólido - + The alignment of this wall on its base object, if applicable O aliñamento desta parede no seu obxecto de base, se é aplicábel - + The face number of the base object used to build this wall Número de caras do obxecto base usado para construír esta parede - + The offset between this wall and its baseline (only for left and right alignments) A separación entre esta parede e a súa liña de base (só para aliñacións esquerda e dereita) - + The normal direction of this window A dirección normal desta fiestra - + The area of this window A área desta fiestra @@ -1049,7 +1044,7 @@ Unha situación opcional a maiores para engadir ó perfil antes de ser extruído - + Opens the subcomponents that have a hinge defined Abre os sub-compoñentes que teñen un gonzo definido @@ -1089,12 +1084,12 @@ Lista dos grosores de capa - + The line color of the projected objects Cor de liña dos obxectos proxectados - + The color of the cut faces (if turned on) Cor das caras talladas (se está activado) @@ -1104,7 +1099,7 @@ Remonte das banceiras na parte inferior dos chanzos - + The number of the wire that defines the hole. A value of 0 means automatic O número de arames que define o burato. Un valor de 0 significa automático @@ -1194,7 +1189,7 @@ Espazo persoalizado da barra corrugada - + Shape of rebar Forma da barra @@ -1204,17 +1199,17 @@ Inverter a dirección do teito se vai ao revés - + Shows plan opening symbols if available Amosa os símbolos de apertura da planta se está dispoñible - + Show elevation opening symbols if available Amosa os símbolos de apertura do alzado se está dispoñible - + The objects that host this window Obxectos que acolle esta fiestra @@ -1269,12 +1264,12 @@ O nivel do punto (0,0,0) deste nivel - + The shape of this object A forma desde obxecto - + The line width of this object Largura da lixa desde obxecto @@ -1414,47 +1409,47 @@ Se é certo, as cores dende o ficheiro ligado manteranse actualizadas - + The objects that must be considered by this section plane. Empty means the whole document. Os obxectos que deben ser considerados por este plano de corte. Baleiro significa todo o documento. - + The transparency of this object A transparencia deste obxecto - + The color of this object A cor deste obxecto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distancia entre o plano de corte mais a vista actual de corte (mantén isto nun valor baixo pero non cero) - + The street and house number of this site, with postal box or apartment number if needed A rúa e o número da casa desde sitio, con número postal ou número de apartamento se é necesario - + The region, province or county of this site A rexión, provincia ou país deste sitio - + A url that shows this site in a mapping website Unha url que amosa este sitio nun sitio web de mapa - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Desprazamento opcional entre a orixe (0,0,0) mais o punto indicado por xeo-coordenadas - + Specifies if this space is internal or external Especifica se este espazo é interno ou externo @@ -1504,200 +1499,230 @@ A 'contorna esquerda' de tódolos segmentos das escaleiras - + Enable this to make the wall generate blocks Habilitar isto para facer bloques de parede xerados - + The length of each block A lonxitude de cada bloque - + The height of each block O alto de cada bloque - + The horizontal offset of the first line of blocks Desprazamento horizontal da primeira liña de bloques - + The horizontal offset of the second line of blocks Desprazamento horizontal da segunda liña de bloques - + The size of the joints between each block Tamaño das unións entre cada bloque - + The number of entire blocks O número de bloques enteiros - + The number of broken blocks O número de bloques rompidos - + The components of this window Compoñentes desta fiestra - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. A fondura do burato que fai esta fiestra no obxecto hóspede. Se é 0, o valor calcularase automaticamente. - + An optional object that defines a volume to be subtracted from hosts of this window O obxecto opcional que define un volume a ser subtraído dende o hóspede desta fiestra - + The width of this window Largura da fiestra - + The height of this window Altura da fiestra - + The preset number this window is based on O número preestablecido no que está baseado esta fiestra - + The frame size of this window O tamaño da estrutura desta fiestra - + The offset size of this window O tamaño do desprazamento desta fiestra - + The width of louvre elements Largura dos elementos da persiana - + The space between louvre elements Espazo entre os elementos da persiana - + The number of the wire that defines the hole. If 0, the value will be calculated automatically O número de arames que define o burato. Se é 0, o valor será calculado automaticamente Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Especifica se movendo este obxecto moves a base no seu lugar A single section of the fence - A single section of the fence + Unha sección sinxela dun valado A single fence post - A single fence post + Un único fito de valado The Path the fence should follow - The Path the fence should follow + A Traxectoria que o valado debe seguir The number of sections the fence is built of - The number of sections the fence is built of + O número de seccións que farán o valado The number of posts used to build the fence - The number of posts used to build the fence + O número de fitos usados ao facer o valado - + The type of this object - The type of this object + O tipo desde obxecto IFC data - IFC data + IFC data IFC properties of this object - IFC properties of this object + IFC propiedades deste obxecto - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Descrición dos atributos IFC aínda non estando implementados + + + + If True, resulting views will be clipped to the section plane area. + Se é Certo, os resultados das vistas serán recortados á área do plano de corte. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Se é verdadeiro, a cor dos obxectos materiais será usada para raiar áreas de tallada. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Cando o conxunto 'Norte Verdadeiro' está activado a xeometría se xirará para que coincida co norte verdadeiro deste sitio - + + Show compass or not + Amosar compás ou non + + + + The rotation of the Compass relative to the Site + A rotación do Compás relativo deste Sitio + + + + The position of the Compass relative to the Site placement + A posición do Compás relativo á colocación do Sitio + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Actualizar a Declaración do valor baseado na rotación do compás The thickness of the risers - The thickness of the risers + Grosor do desnivel The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + A 'contorna correcta' de tódolos segmentos das escaleiras + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Compoñentes @@ -1717,12 +1742,12 @@ Crear eixo - + Remove Rexeitar - + Add Engadir @@ -1832,87 +1857,87 @@ Vista de - + Create Section Plane Facer plano de corte - + Create Site Crear sitio - + Create Structure Crear estrutura - + Create Wall Crear parede - + Width Largura - + Height Altura - + Error: Invalid base object Erro: Obxecto de base non válido - + This mesh is an invalid solid Esta malla é un sólido non válido - + Create Window Crear a fiestra - + Edit Editar - + Create/update component Crear/actualizar compoñente - + Base 2D object Obxecto base 2D - + Wires Arames - + Create new component Crear novo compoñente - + Name Nome - + Type Tipo - + Thickness Grosor @@ -1922,7 +1947,7 @@ Erro: Non se puido determinar a codificación de caracteres - + file %s successfully created. ficheiro %s creado con éxito. @@ -1972,32 +1997,32 @@ Crear escaleiras - + Length Lonxitude - + Error: The base shape couldn't be extruded along this tool object Erro: A forma base non pode ser extruída ó longo deste obxecto - + Couldn't compute a shape Non foi posíbel calcular unha forma - + Merge Wall Unir parede - + Please select only wall objects Por favor, escolla só obxectos parede - + Merge Walls Unir Paredes @@ -2012,7 +2037,7 @@ Erro ó calcular a forma do obxecto - + Create Structural System Crear sistema estrutural @@ -2162,7 +2187,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Altura (mm) - + Create Component Crear compoñente @@ -2177,17 +2202,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela As paredes só poden basearse en obxectos Peza ou Malla - + Set text position Estabelecer a posición do texto - + Category Categoría - + Key Chave @@ -2197,12 +2222,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Valor - + Unit Unidade - + Create IFC properties spreadsheet Crear a folla de cálculo de propiedades IFC @@ -2232,7 +2257,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Facer folla no panel - + Facemaker returned an error O facedor de caras devolveu un erro @@ -2257,137 +2282,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Crear conectador - + Precast elements Elementos prefabricados - + Slab type Tipo de lousa - + Chamfer Chafrán - + Dent length Lonxitude do canzorro - + Dent width Largura do canzorro - + Dent height Altura do canzorro - + Slab base Lousa de base - + Number of holes Número de furados - + Major diameter of holes Diámetro maior dos furados - + Minor diameter of holes Diámetro menor dos furados - + Spacing between holes Espazado entre furados - + Number of grooves Número de rañuras - + Depth of grooves Fondura das rañuras - + Height of grooves Altura das rañuras - + Spacing between grooves Espazado entre rañuras - + Number of risers Número de tabicas - + Length of down floor Lonxitude do baixo - + Height of risers Altura de tabicas - + Depth of treads Fondura dos chanzos - + Precast options Opcións de prefabricado - + Dents list Listaxe de canzorros - + Add dent Engadir canzorro - + Remove dent Desbotar canzorro - + Slant Inclinación - + Level Nivel - + Rotation Rotación - + Offset Separación @@ -2412,58 +2437,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Listaxe - + There is no valid object in the selection. Site creation aborted. Non hai ningún obxecto válido na selección. Construción do sitio abortada. - + Node Tools Ferramentas de nós - + Reset nodes Restaurar nós - + Edit nodes Editar nós - + Extend nodes Estender nós - + Extends the nodes of this element to reach the nodes of another element Estende os nós dese elemento para acadar os nós de outro elemento - + Connect nodes Conectar nós - + Connects nodes of this element with the nodes of another element Liga nós deste elemento cos nós doutro elemento - + Toggle all nodes Alternar tódolos nós - + Toggles all structural nodes of the document on/off Alterna tódolos nós estruturais do documento aceso/apagado - + Intersection found. Intersección atopada. @@ -2475,22 +2500,22 @@ Site creation aborted. Porta - + Hinge Gonzo - + Opening mode Xeito de apertura - + Get selected edge Coller bordo escolmado - + Press to retrieve the selected edge Prema para recuperar o bordo escolmado @@ -2520,17 +2545,17 @@ Site creation aborted. Nova capa - + Wall Presets... Definicións de muros... - + Hole wire Burato - + Pick selected Elixir o escolmado @@ -2615,17 +2640,17 @@ Site creation aborted. Este obxecto non ten cara - + Space boundaries Fronteiras de espazo - + Error: Unable to modify the base object of this wall Erro: Non se pode modificar o obxecto base desta parede - + Window elements Elementos da fiestra @@ -2737,7 +2762,7 @@ Creación do edificio abortada. Todo ben! Non se atoparon problemas - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: O obxecto non ten o atributo IfcProperties. Cancelar a creación de follas de cálculo para o obxecto: @@ -2802,10 +2827,9 @@ Creación do edificio abortada. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Podes poñer nun obxecto de calquera tipo os seguintes: Sitio, Edificio e Andar - nun obxecto Andar. Obxecto Andar non permite aceptar Sitio, Edificio ou obxectos Andar. +Sitio, Edificio e obxectos Andar serán removidos dende a selección. +Podes trocar esas preferencias. @@ -2919,47 +2943,47 @@ Floor creation aborted. Non hai folla de cálculo adxunta a este programa - + Section plane settings Axustes do plano de corte - + Objects seen by this section plane: Obxectos vistos por este plano de corte: - + Section plane placement: Situación do Plano de corte: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar - + Center Centro - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2970,77 +2994,77 @@ Outros obxectos serán desbotados da escolma. Nota: podes trocar isto nas preferencias. - + Choose another Structure object: Escolmar outro obxecto Estrutura: - + The chosen object is not a Structure O obxecto escolmado non é unha Estrutura - + The chosen object has no structural nodes O obxecto escollido non ten nós estruturais - + One of these objects has more than 2 nodes Un destes obxectos ten máis de 2 nós - + Unable to find a suitable intersection point Incapaz de atopar un punto de intersección axeitado - + Intersection found. Intersección atopada. - + The selected wall contains no subwall to merge A parede escolmada non contén ningunha sub-parede para fundir - + Cannot compute blocks for wall Non se pode calcular os bloques para a parede - + Choose a face on an existing object or select a preset Escolme unha face nun obxecto existente ou escolme un pre-definido - + Unable to create component Non é posíbel crear o compoñente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número de arame que define un burato no obxecto hóspede. Un valor de cero adoptará automáticamente o arame máis grande - + + default + por defecto - + If this is checked, the default Frame value of this window will be added to the value entered here Se se marca, a Estrutura predeterminada desta fiestra engadírase ao valor ingresado aquí - + If this is checked, the default Offset value of this window will be added to the value entered here Se se marca esta opción, o valor predeterminado de desprazamento desta fiestra engadírase ao valor ingresado aquí - + pycollada not found, collada support is disabled. non se atopou pycollada, o soporte de collada está inhabilitado. @@ -3080,7 +3104,7 @@ Nota: podes trocar isto nas preferencias. Erro: a súa versión de IfcOpenShell é moi vella - + Successfully written Gravado con éxito @@ -3090,7 +3114,7 @@ Nota: podes trocar isto nas preferencias. Atopouse unha forma que contén curvas, triangulando - + Successfully imported Importados con éxito @@ -3100,50 +3124,164 @@ Nota: podes trocar isto nas preferencias. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Podes poñer calquera obxecto pero obxectos Sitio e Edificio nun obxecto Edificio. Obxecto Edificio non permite aceptar obxectos Sitio e Edificio. +Obxectos Sitio e Edificio serán removidos dende a selección. +Podes trocar esas preferencias. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Remover obxectos destacados dende a lista de enriba - + Add selected Engadir escolma - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Engadir obxecto(s) escolmados ao ámbito de aplicación deste plano de sección + + + + Rotates the plane along the X axis + Rotar o plano ao longo do eixe X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Rotar o plano ao longo do eixe Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Rotar o plano ao longo do eixe Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Redimensiona o plano para que os obxectos da lista de enriba collan - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Centra o plano na lista de obxectos de enriba - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Primeiro punto da trabe + + + + Base point of column + Punto da base da columna + + + + Next point + Seguinte punto + + + + Structure options + Opcións da estrutura + + + + Drawing mode + Modo debuxo + + + + Beam + Trabe + + + + Column + Columna + + + + Preset + Predefinido + + + + Switch L/H + Trocar L/H + + + + Switch L/W + Trocar L/W + + + + Con&tinue + &Seguir + + + + First point of wall + Primeiro punto da parede + + + + Wall options + Opcións da parede + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Esta lista amosa tódolos obxectos MultiMateriais deste documento. Crea un novo para definir tipos de paredes. + + + + Alignment + Aliñamento + + + + Left + Esquerda + + + + Right + Dereita + + + + Use sketches + Usar esbozos + + + + Structure + Estrutura + + + + Window + Fiestra + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3357,21 +3495,16 @@ You can change that in the preferences. Checks the selected objects for problems Verifica os obxectos escolmados para ver se hai problemas - - - Explore the contents of an IFC file - Explora o contido dun ficheiro IFC - Arch_CloneComponent - + Clone component Clonar compoñente - + Clones an object as an undefined architectural component Clona un obxecto coma un compoñente arquitectónico indefinido @@ -3392,12 +3525,12 @@ You can change that in the preferences. Arch_Component - + Component Compoñente - + Creates an undefined architectural component Crea un compoñente arquitectónico indeterminado @@ -3431,14 +3564,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Valado - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Crea un obxecto valado dende unha sección escolmada, fito e traxectoria @@ -3530,23 +3663,15 @@ You can change that in the preferences. Índices das caras a agochar - - Arch_IfcExplorer - - - Ifc Explorer - Explorador Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea unha folla de cálculo IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea unha folla de cálculo para almacenar as propiedades Ifc dun obxecto. @@ -3575,12 +3700,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Unir Paredes - + Merges the selected walls, if possible Une as paredes escolmadas, se é posible @@ -3786,12 +3911,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Crea un obxecto Plano de corte, incluíndo os obxectos escolmados @@ -3812,12 +3937,12 @@ You can change that in the preferences. Arch_Site - + Site Sitio - + Creates a site object including selected objects. Crea un obxecto Sitio, incluíndo os obxectos escolmados. @@ -3864,12 +3989,12 @@ You can change that in the preferences. Arch_Structure - + Structure Estrutura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea un obxecto Estrutura desde cero ou a partir dun obxecto escolmado (esbozo, arame, cara ou sólido) @@ -3877,12 +4002,12 @@ You can change that in the preferences. Arch_Survey - + Survey Colleita de datos - + Starts survey Arrinca a colleita de datos @@ -3890,12 +4015,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Alternar marcador IFC Brep - + Force an object to be exported as Brep or not Forza un obxecto a ser exportado como Brep ou non @@ -3903,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Alternar sub-compoñentes - + Shows or hides the subcomponents of this object Amosa ou agocha os sub-compoñentes deste obxecto @@ -3929,12 +4054,12 @@ You can change that in the preferences. Arch_Window - + Window Fiestra - + Creates a window object from a selected object (wire, rectangle or sketch) Crea un obxecto Fiestra a partir dun obxecto escolmado (esbozo, arame ou rectángulo) @@ -4205,7 +4330,7 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Draft - + Writing camera position Escribir posición da cámara @@ -4641,7 +4766,7 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Transparencia: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. A algúns visualizadores IFC non lles gustan os obxectos exportados como extrusións. Usar isto para forzar tódolos obxectos a seren exportados como xeometría BREP. @@ -4681,7 +4806,7 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Grosor - + Force export as Brep Forzar exportación como Brep @@ -4711,7 +4836,7 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela DAE - + Export options Opcións de exportación @@ -4921,22 +5046,22 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Permitir cadrados - + Use triangulation options set in the DAE options page Usa as opcións de triangulación estabelecidas na páxina de opcións DAE - + Use DAE triangulation options Usa as opcións de triangulación DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Formas curvas que non poden ser representadas como curvas en IFC son descompostas en facetas planas. Se isto está activado, faise un cálculo adicional para uniren facetas coplanares. - + Join coplanar facets when triangulating Xuntar facetas planares ó triangular @@ -4976,12 +5101,12 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Importar propiedades Ifc para unha folla de cálculo - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Ó exportar obxectos sen UID, o UID xerado será almacenado dentro do obxecto FreeCAD para re-usar a próxima vez que o obxecto sexa exportado, o que dá diferenzas menores entre versións - + Store IFC universal ID in FreeCAD objects Almacenar o ID universal IFC, dentro do obxecto FreeCAD @@ -5051,17 +5176,17 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Dividir con paredes multicapa - + Warning, experimental feature! Atento, característica experimental! - + Use IfcOpenShell serializer if available Use o serializador IfcOpenShell se está dispoñible - + Export 2D objects as IfcAnnotations Exportar obxectos 2D como anotacións Ifc @@ -5086,12 +5211,12 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Axustar a vista durante a importación - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Se está marcada, tódalas propiedades do obxecto de FreeCAD hanse almacenar nos obxectos exportados, permitindo recrear un modelo paramétrico completo ó reimportar. - + Export full FreeCAD parametric model Exportar un modelo paramétrico completo de FreeCAD @@ -5146,59 +5271,59 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Excluír lista: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Se está marcado, cando sexa posible, usará entidades similares só unha vez no ficheiro. Isto pode reducir un lote o tamaño do ficheiro, pero ha ser menos doadamente lexible para humanos - + Reuse similar entities Volver usar entidades semellantes - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Cando é posible, os obxectos IFC que son rectángulos extruídos expórtanse coma IfcRectangleProfileDef. Aínda así, algunhas outras aplicacións notoriamente teñen problemas para importar esta entidade. Se este é o caso, pode deshabilitalo aquí (tódolos perfís exportaranse coma IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Desactivar IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Define a propiedade "Mover base" a Verdadeiro por defecto IFC version - IFC version + IFC versión The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + A versión IFC pode trocar atributos e produtos sendo soportados IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Espazos Line style: - Line style: + Estilo de liña: @@ -5208,17 +5333,17 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Dashed - Dashed + Liña de trazo Dotted - Dotted + Liña de puntos Dashdot - Dashdot + TrazoPunto @@ -5226,14 +5351,49 @@ Nota: a partir de LibreOffice v5.4.5.1 a ruta correcta é agora: Barra de lapela Cor de liña - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Algúns tipos IFC tales como IfcBeam ten versións especiais como IfcWallStandarCase ou IfcBeamStandartCase. Se estas opcións son activadas, FreeCAD exportará automáticamente tales obxectos como casos estándard cando as condicións necesarias sexan cumpridas. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.qm b/src/Mod/Arch/Resources/translations/Arch_hr.qm index 79d30dfdd9..e24d98197d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hr.qm and b/src/Mod/Arch/Resources/translations/Arch_hr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index b2bf8efad4..6b9db7f582 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -44,12 +44,12 @@ Cilj ove komponente je kloniranje - + Other shapes that are appended to this object Drugim oblicima koji su dodati (ovisni) na ovaj objekt - + Other shapes that are subtracted from this object Drugih oblika koji se oduzimaju od ovog objekta @@ -79,7 +79,7 @@ podrucje svih vertikalnih lica objekta - + The area of the projection of this object onto the XY plane Područje projekcije predmeta na ravnini XY @@ -114,7 +114,7 @@ izracun poda i povrsine poda - + The placement of this object polozaj objekta @@ -144,12 +144,12 @@ Zakretanja profila oko svoje osi istiskivanja (extrusion) - + The length of this element, if not based on a profile Dužina ovog elementa, ako se ne temelji na profilu - + The width of this element, if not based on a profile Širina ovog elementa, ako se ne temelji na profilu @@ -194,22 +194,22 @@ Područje ove ploče - + The facemaker type to use to build the profile of this object Vrsta dotjeravanja izgleda, koristi se za izgradnju profila ovog objekta - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Smjer normalnog istiskivanja objekta (zadrži (0,0,0) za automatsko normalno) - + The linked object Povezani objekt - + The line width of the rendered objects Širine crte iscrtanih objekata @@ -349,7 +349,7 @@ Visina ovog elementa - + The structural nodes of this element Strukturni čvorovi ovog elementa @@ -614,132 +614,132 @@ Proračunska tablica za ispis rezultata na - + If false, non-solids will be cut too, with possible wrong results. Ako je netočno, ne krute tvari će se rezati također, s moguće lošim rezultatom. - + The display length of this section plane Dužina prikaza ovog djela ravni - + The display height of this section plane Visina prikaza ovog djela ravni - + The size of the arrows of this section plane Veličina strelica ovog dijela ravni - + Show the cut in the 3D view Prikaži presjek u 3D pogledu - + The rendering mode to use Mod iscrtavanja koji se koristi - + If cut geometry is shown or not Da li je geometrija rezanja prikazana ili ne - + If cut geometry is filled or not Da li je geometrija rezanja ispunjena ili ne - + The size of the texts inside this object Veličina tekstova unutar ovog objekta - + If checked, source objects are displayed regardless of being visible in the 3D model Ako je označeno, izvorni objekti prikazuju se bez obzira jesu li vidljivi u 3D modelu - + The base terrain of this site Osnovni teren ovog mjesta - + The postal or zip code of this site Poštansku adresu ili poštanski broj ovog mjesta - + The city of this site Grad ovog mjesta - + The country of this site Zemlje ovog mjesta - + The latitude of this site Zemljopisna širina ovog mjesta - + Angle between the true North and the North direction in this document Kut između zemljopisnog sjevera i smjera sjever u ovom dokumentu - + The elevation of level 0 of this site Nadmorska visina ovog mjesta - + The perimeter length of this terrain Opseg ovog terena - + The volume of earth to be added to this terrain Volumen zemlje koja će biti dodana ovom terenu - + The volume of earth to be removed from this terrain Volumen zemlje koja će biti uklonjena sa ovog terena - + An extrusion vector to use when performing boolean operations Vektor ekstrudiranja koji se koristi kod booleovih operacija - + Remove splitters from the resulting shape Ukloni procijepe iz stvorenog oblika - + Show solar diagram or not Prikaži ili nemoj prikazati solarni diagram - + The scale of the solar diagram Skala solarnog diagrama - + The position of the solar diagram Pozicija solarnog diagrama - + The color of the solar diagram Boja solarnog diagrama @@ -785,81 +785,76 @@ - A zone this space is part of - Zona ovog prostora je dio - - - The number of people who typically occupy this space Broj ljudi koji obično koristi ovaj prostor - + The electric power needed to light this space in Watts Električna energija potrebna za osvijetljene ovog prostora u vatima (Watts) - + The electric power needed by the equipment of this space in Watts Električna energija potrebna za opremu ovog prostora u vatima (Watts) - + If True, Equipment Power will be automatically filled by the equipment included in this space Ako je istina, snaga opreme biti će automatski ispunjena za opremu uključenu u ovaj prostor - + The type of air conditioning of this space Tip klima uređaja ovog prostora - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Tekst za prikaz. Koristi $area, $label, $tag, $floor, $walls, $ceiling za umetanje odgovarajućih podataka - + The name of the font Ime pisma - + The color of the area text Boja područja teksta - + The size of the text font Veličina pisma teksta - + The size of the first line of text Veličina prvog reda teksta - + The space between the lines of text Razmak između redaka teksta - + The position of the text. Leave (0,0,0) for automatic position Položaj teksta. Ostavite (0,0,0) za automatsku poziciju - + The justification of the text Poravnavanje teksta - + The number of decimals to use for calculated texts Broj decimala koji se koristi kod teksta proračuna - + Show the unit suffix Pokaži dodatak mjerne jedinice (unit suffix) @@ -939,102 +934,102 @@ Razmak između ruba stepeništa i objekta (zida ili sl.) - + An optional extrusion path for this element Opcionalni put izguravanja (extrusion) za ovaj element - + The height or extrusion depth of this element. Keep 0 for automatic Visine ili ekstruzije dubina ovog elementa. Držite 0 za automatsko - + A description of the standard profile this element is based upon Opis standardnog profila ovog elementa temelji se na - + Offset distance between the centerline and the nodes line Udaljenost od centralne linije i čvora - + If the nodes are visible or not Da li su čvorovi vidljivi ili nisu - + The width of the nodes line Širina linije čvorova - + The size of the node points Veličina točke čvora - + The color of the nodes line Boja linije čvorova - + The type of structural node Vrsta strukturnog čvora - + Axes systems this structure is built on Sustavi osi na kojima se gradi ova struktura - + The element numbers to exclude when this structure is based on axes Broj elementa koje treba isključiti kada se ova struktura temelji na osima - + If true the element are aligned with axes Ako je "true", element je poravnat sa osi - + The length of this wall. Not used if this wall is based on an underlying object Dužina ovog zida. Ne koristiti ako se zid temelji na podlozi objekta - + The width of this wall. Not used if this wall is based on a face Širina zida. Ne koristiti ako se zid temelji na licu - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Visina ovog zida. Držite 0 za automatsko. Ne koristiti ako se zid temelji na krutom tijelu - + The alignment of this wall on its base object, if applicable Poravnavanje ovih zidova na njihov osnovni pravac, ako je primjenljivo - + The face number of the base object used to build this wall Broj naličja osnovnog objekta korišten za izgradnju zida - + The offset between this wall and its baseline (only for left and right alignments) Odmak ozmeđu zida i osnovne linije (samo za lijevo i desno poravnanje) - + The normal direction of this window Normalan smjer ovog prozora - + The area of this window Područje ovog prozora @@ -1049,7 +1044,7 @@ Opcionalno dodatni prostor da biste ga dodali profilu prije istiskivanja - + Opens the subcomponents that have a hinge defined Otvoriti podkomponentu za dohvatiti definiciju šarke @@ -1089,12 +1084,12 @@ Lista debljina slojeva - + The line color of the projected objects Boja linije projiciranih objekata - + The color of the cut faces (if turned on) Boja za lice rezanja (ako je uključeno) @@ -1104,7 +1099,7 @@ Preklapanje reda poveza iznad dna profila - + The number of the wire that defines the hole. A value of 0 means automatic Broj profila koji definiraju otvore. Vrijednost 0 je podrazumijevana @@ -1194,7 +1189,7 @@ Korisničko prilagođeni razmak čelične armature - + Shape of rebar Oblik čelične armature @@ -1204,17 +1199,17 @@ Perbaci smjer krova ako ide u pogrešnom smjeru - + Shows plan opening symbols if available Pokazuje otvorene simbole plana ako su dostupni - + Show elevation opening symbols if available Pokazuje simbole otvora nagiba ako su dostupni - + The objects that host this window Objekte koji dijele ovaj prozor @@ -1269,12 +1264,12 @@ Nivo (0,0,0) točke ovog Nivoa - + The shape of this object Oblik ovog objekta - + The line width of this object Debljina linije ovog objekta @@ -1414,47 +1409,47 @@ Ako je istina, boje iz povezane datoteke će biti automatski ažurirane - + The objects that must be considered by this section plane. Empty means the whole document. Objekti koji se razmatraju po dijelu ravni. Prazno znači čitav dokument. - + The transparency of this object Prozirnost ovog objekta - + The color of this object Boja ovog objekta - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Udaljenost između ravnine rezanja i aktualnog pogleda rezanja (mala vrijednost ali ne nula) - + The street and house number of this site, with postal box or apartment number if needed Ulica i kućni broj ovog mjesta, ako je potrebno sa brojem poštanskog sandučića ili apartmana - + The region, province or county of this site Regija, provincija ili županija ove stranice - + A url that shows this site in a mapping website Url koji pokazuje ovo mjesto na mapiranoj web-stranici - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Opcionalni pomak između porijekla modela (0,0,0) i mjesta označenog na geokoordinatama - + Specifies if this space is internal or external Određuje dali je ovaj prostor unutarnji ili vanjski @@ -1504,97 +1499,97 @@ 'Lijeva vanjska linija' svih segmenata stepenica - + Enable this to make the wall generate blocks Omogućiti ovo da se od zida generiraju blokovi - + The length of each block Dužina svakog bloka - + The height of each block Visina svakog bloka - + The horizontal offset of the first line of blocks Horizontalni pomak prvog reda blokova - + The horizontal offset of the second line of blocks Horizontalni pomak drugog reda blokova - + The size of the joints between each block Veličina pukotina između svakog bloka - + The number of entire blocks Konačni broj blokova - + The number of broken blocks Broj šatiranih blokova - + The components of this window Sastavni dijelovi ovog prozora - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Dubina rupe koju čini ovaj prozor u domaćin-objektu. Ako je 0, vrijednost će se automatski izračunati. - + An optional object that defines a volume to be subtracted from hosts of this window Opcionalni objekt koji definira volumen koji če biti oduzet od domaćina ovog prozora - + The width of this window Širina prozora - + The height of this window Visina prozora - + The preset number this window is based on Unaprijed postavljeni broj za ovaj prozor je na temelju - + The frame size of this window Veličinu okvira prozora - + The offset size of this window Veličina pomaka ovog prozora - + The width of louvre elements Širina elemenata louvre - + The space between louvre elements Razmak između louvre elemenata - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Broj žice koja definira rupu. Ako je vrijednost 0 izračunat će se automatski @@ -1629,75 +1624,105 @@ The number of posts used to build the fence - + The type of this object - The type of this object + Tip ovog objekta IFC data - IFC data + IFC-podaci IFC properties of this object - IFC properties of this object + IFC svojstva ovog objekta - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Opis IFC atributa još nije ugrađeno - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - Show compass or not + Pokaži kompas ili ne - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation The thickness of the risers - The thickness of the risers + Debljina od uspona The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponente @@ -1717,12 +1742,12 @@ Stvaranje osi - + Remove Ukloniti - + Add Dodaj @@ -1832,87 +1857,87 @@ Pogled od - + Create Section Plane Izradi ravninu presjeka - + Create Site Izgradi posjed - + Create Structure Izgradi Strukturu - + Create Wall Izgradi zid - + Width Širina - + Height Visina - + Error: Invalid base object Greška: Navaljan temeljni objekt - + This mesh is an invalid solid Ova mreža nije ispravno tijelo - + Create Window Napravi prozor - + Edit Uredi - + Create/update component Napravi/osvježi komponentu - + Base 2D object Temeljni 2D objekt - + Wires Žice - + Create new component Izradi novu komponentu - + Name Ime - + Type Tip - + Thickness Debljina @@ -1922,7 +1947,7 @@ Greška: Nije moguće odrediti način enkodiranja - + file %s successfully created. datoteka %s je uspješno izrađena. @@ -1972,32 +1997,32 @@ Napravi stepenište - + Length Dužina - + Error: The base shape couldn't be extruded along this tool object Pogreška: Osnovni oblik nije mogao biti istisnut uzduž pomoćnog objekta - + Couldn't compute a shape Oblik se nije mogao izračunati - + Merge Wall Spajanje zida - + Please select only wall objects Odaberite samo objekte zidova - + Merge Walls Spajanje zidova @@ -2012,7 +2037,7 @@ Pogreška u proračunu oblika ovog objekta - + Create Structural System Pravljenje Strukturnih sustava @@ -2172,7 +2197,7 @@ ako je doseg = 0 onda se doseg izračunava tako da je visina ista kao relativni Visina (mm) - + Create Component Izradi komponentu @@ -2187,17 +2212,17 @@ ako je doseg = 0 onda se doseg izračunava tako da je visina ista kao relativni Zidovi mogu temeljiti samo na objektima dijelovi ili mreže - + Set text position Postavi tekst na poziciju - + Category Kategorija - + Key Ključ @@ -2207,12 +2232,12 @@ ako je doseg = 0 onda se doseg izračunava tako da je visina ista kao relativni Vrijednost - + Unit Jedinica - + Create IFC properties spreadsheet Izradi IFC tablice svojstva @@ -2242,7 +2267,7 @@ ako je doseg = 0 onda se doseg izračunava tako da je visina ista kao relativni Izradi nacrt panela - + Facemaker returned an error Graditelj lica je vratio pogrešku @@ -2267,137 +2292,137 @@ ako je doseg = 0 onda se doseg izračunava tako da je visina ista kao relativni Napravi Spojnik - + Precast elements Montažni elementi - + Slab type Vrsta Ploče - + Chamfer Zarubljenje - + Dent length Dužina udubljenja - + Dent width Širina udubljenja - + Dent height Visina udubljenja - + Slab base Osnova Ploče - + Number of holes Broj rupa - + Major diameter of holes Veliki promjer rupe - + Minor diameter of holes Manji promjer rupe - + Spacing between holes Razmak između rupa - + Number of grooves Broj utora - + Depth of grooves Dubina utora - + Height of grooves Visina utora - + Spacing between grooves Razmak između utora - + Number of risers Broj uzvišenja - + Length of down floor Duljina doljnjeg poda - + Height of risers Visina uzvišenja - + Depth of treads Dubina gazišta - + Precast options Montažne opcije - + Dents list Lista udubljenja - + Add dent Dodaj udubljenje - + Remove dent Ukloni udubljenje - + Slant Kosina - + Level Razina - + Rotation Rotacija - + Offset Pomak @@ -2422,59 +2447,59 @@ ako je doseg = 0 onda se doseg izračunava tako da je visina ista kao relativni Raspored - + There is no valid object in the selection. Site creation aborted. Ne postoji valjani objekt u odabiru. Stvaranje stranice prekinuto. - + Node Tools Alati Čvora - + Reset nodes Resetiraj čvorove - + Edit nodes Uređivanje čvorova - + Extend nodes Proširi čvorove - + Extends the nodes of this element to reach the nodes of another element Produžuje čvorove ovog elementa da dohvate čvorove drugog elementa - + Connect nodes Povezivanje čvorova - + Connects nodes of this element with the nodes of another element Povezuje čvorove ovog elementa sa čvorovima drugog elementa - + Toggle all nodes Uključi/isključi sve čvorove - + Toggles all structural nodes of the document on/off Uključuje/isključuje sve strukturne čvorove dokumenta - + Intersection found. Sjecište našao. @@ -2486,22 +2511,22 @@ Stvaranje stranice prekinuto. Vrata - + Hinge Šarka - + Opening mode Način otvaranja - + Get selected edge Zadrži odabrani rub - + Press to retrieve the selected edge Pritisnite da biste dohvatili odabrani rub @@ -2531,17 +2556,17 @@ Stvaranje stranice prekinuto. Novi sloj - + Wall Presets... Zid predlošci... - + Hole wire Šuplja žica - + Pick selected Pokupi odabrano @@ -2626,17 +2651,17 @@ Stvaranje stranice prekinuto. Ovaj objekt nema lice - + Space boundaries Granice prostora - + Error: Unable to modify the base object of this wall Pogreška: Nije moguće izmijeniti osnovni objekt ovog zida - + Window elements Elementi prozora @@ -2748,7 +2773,7 @@ Stvaranje zgrade prekinuto. Sve u redu! Nema problema - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Objekt nema atribut IfcProperties. Prekinuto stvaranje proračunske tablice za objekt: @@ -2813,10 +2838,10 @@ Stvaranje zgrade prekinuto. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Možete staviti sve osim mjesta stajanja, zgrade, etaže u objekt etaže. +Objektu etaže nije dopušteno da prihvati mjesta stajanja i objekte zgrade ili objekt etaže. +Mjesto stajanja, zgrada i etaža uklanjaju se iz odabira. +To možete promijeniti u postavkama. @@ -2931,47 +2956,47 @@ Stvaranje zgrade prekinuto. Nema proračunske tablice vezan za ovaj raspored - + Section plane settings Postavke odsječka ravni - + Objects seen by this section plane: Objekti viđeni sa ovog djela ravni: - + Section plane placement: Položaj odsječka ravni: - + Rotate X Rotiraj X - + Rotate Y Rotiraj Y - + Rotate Z Rotiraj Z - + Resize Promjena veličine - + Center Središte - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Drugi objekti će biti uklonjeni iz odabira. Zabilješka: Vi to možete promijeniti u postavkama. - + Choose another Structure object: Odaberite drugi strukturni objekt: - + The chosen object is not a Structure Odabrani objekt nije struktura - + The chosen object has no structural nodes Odabrani objekt nema strukturna čvorišta - + One of these objects has more than 2 nodes Jedan od tih objekata ima više od 2 čvorišta - + Unable to find a suitable intersection point Nije moguće pronaći prikladno sjecište - + Intersection found. Sjecište našao. - + The selected wall contains no subwall to merge Odabrani zid sadrži pomoćni za spajanje - + Cannot compute blocks for wall Ne može izračunati blokove za zid - + Choose a face on an existing object or select a preset Odaberite lice na postojećem objektu ili odaberite predložak - + Unable to create component Nije moguće stvoriti komponentu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Broj žice ruba koji definira rupu u glavnom objektu. Vrijednost nula će automatski prihvatiti najdužu žicu ruba - + + default + zadano - + If this is checked, the default Frame value of this window will be added to the value entered here Ako je to označeno, zadana vrijednost nosača prozora će biti dodana vrijednosti upisanoj ovdje - + If this is checked, the default Offset value of this window will be added to the value entered here Ako je to označeno, zadana vrijednost pomaka prozora će biti dodana vrijednosti upisanoj ovdje - + pycollada not found, collada support is disabled. pycollada nije pronađena, collada podrška je onemogućena. @@ -3092,7 +3117,7 @@ Zabilješka: Vi to možete promijeniti u postavkama. Pogreška: IfcOpenShell inačica je prestara - + Successfully written Uspješno napisan @@ -3102,7 +3127,7 @@ Zabilješka: Vi to možete promijeniti u postavkama. Pronađen oblik sa krivuljama, triangulacija (približavanje pomoću pravca) - + Successfully imported Uspješno uvezen @@ -3112,51 +3137,166 @@ Zabilješka: Vi to možete promijeniti u postavkama. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Možete staviti sve osim mjesta stajanja i zgrade u objekt zgrade. +Objektu zgrade nije dopušteno da prihvati mjesta stajanja i objekte zgrade. +Mjesto stajanja i zgrada uklanjaju se iz odabira. +To možete promijeniti u postavkama. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Ukloni istaknute objekte sa liste iznad - + Add selected Dodaj odabrano - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis - Rotates the plane along the X axis + Rotiraj ravninu uzduž X osi + + + + Rotates the plane along the Y axis + Rotiraj ravninu uzduž Y osi - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Rotiraj ravninu uzduž Z osi - Rotates the plane along the Z axis - Rotates the plane along the Z axis - - - Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + Prva točka nosača + + + + Base point of column + Base point of column + + + + Next point + Sljedeća točka + + + + Structure options + Opcije strukture + + + + Drawing mode + Način crtanja + + + + Beam + Zraka + + + + Column + Stupci + + + + Preset + Šablon + + + + Switch L/H + Prebaci L/H + + + + Switch L/W + Prebaci L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + Prva točka zida + + + + Wall options + Opcije zida + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Poravnanje + + + + Left + Lijevo + + + + Right + Desno + + + + Use sketches + Koristite skice + + + + Structure + Struktura + + + + Window + Prozor + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Provjerava probleme na selektiranim objektima - - - Explore the contents of an IFC file - Istraži sadržaj CSV datoteke - Arch_CloneComponent - + Clone component Kloniraj komponentu - + Clones an object as an undefined architectural component Klonira objekt kao nedefiniranu arhitektonsku komponentu @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Komponenta - + Creates an undefined architectural component Stvara nedefiniranu graditeljsku komponentu @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. Indeksi naličja za sakrivanje - - Arch_IfcExplorer - - - Ifc Explorer - IFC Uređivač - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Stvaranje IFC proračunske tablice... - + Creates a spreadsheet to store IFC properties of an object. Stvara proračunsku tablicu za spremanje IFC svojstava objekta. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Spajanje zidova - + Merges the selected walls, if possible Spoji odabrane zidove ako je moguće @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Ravnina odjeljka - + Creates a section plane object, including the selected objects Kreira plohu presjeka, ukljućujući odabrane objekte @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Mjesto - + Creates a site object including selected objects. Stvara Mjesto, uključujući odabrane objekte. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Stvara strukture objekta od nule ili od odabranog objekta (skica, žica, površina ili tijelo) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Istraživanje - + Starts survey Počinje istraživanje @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Uključi/isključi IFC Brep oznaku - + Force an object to be exported as Brep or not Nametni da li će objekt biti izvežen kao Brep ili neće @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Uključivanje/isključivanje podsastavnice - + Shows or hides the subcomponents of this object Prikazuje ili skriva podsastavnice ovoga objekta @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Prozor - + Creates a window object from a selected object (wire, rectangle or sketch) Kreira prozor od selektiranog objekta (žica, pravokutnik ili skica) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Zapiši položaj kamere @@ -4653,7 +4780,7 @@ You can change that in the preferences. Prozirnost: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Debljina - + Force export as Brep Prisili izvoz kao Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Postavke izvoza @@ -4933,22 +5060,22 @@ You can change that in the preferences. Koristi kvadrate - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Zaobljene forme koje nije moguće predstaviti kao krivulje u IFC formatu su de komprimirane u ravne izbrušene plohe. Ako je uključeno dodatna izračunavanja su napravljena za spajanje koplanarnih (u istoj ravni) izbrušenih ploha. - + Join coplanar facets when triangulating Spoji komplanarne (u istoj ravni) izbrušene plohe kod triangulacije (približavanje pomoću rani) @@ -4988,12 +5115,12 @@ You can change that in the preferences. Uvoz IFC svojstava u proračunsku tablicu - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Ako izvozite objekte bez UID, generirani UID će biti spremljen unutar FreeCAD objekta za ponovo korištenje slijedeći put kad taj objekt bude izvezen, što dovodi do manjih razlika između verzija - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Razdjeli višestruke zidove - + Warning, experimental feature! Upozorenje, eksperimentalne opcije! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Izvezi 2D objekte kao IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Prilagodi prikaz prilikom uvoza - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Ako je to označeno, sva FreeCAD svojstva objekta će biti pohranjena unutar izvezenog objekta, dopuštajući da se kod ponovnog uvoza napravi potpuni parametarski model. - + Export full FreeCAD parametric model Izvezi potpuni FreeCAD parametarski model @@ -5158,59 +5285,59 @@ You can change that in the preferences. Lista isključenja: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Ponovno korištenje sličnih subjekata - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Ako je moguće, IFC objekti koji su istisnuti kao pravokutnik su izvezeni kao IfcRectangleProfileDef. Kao i uvijek, poznato je da neke druge aplikacije imaju problem kod uvoza te jezgre. Ako je to vaš slučaj vi ovdje možete to isključiti (svi profili će biti izvezeni kao IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Onemogući IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Postavjla "Pomakni osnovu" svojstvo na istinito kao zadano IFC version - IFC version + IFC verzija The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + IFC verzija određuje koji su atributi i produkti podržani IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Razmaci Line style: - Line style: + Stil crte: @@ -5220,17 +5347,17 @@ You can change that in the preferences. Dashed - Dashed + Iscrtkano Dotted - Dotted + Točkasto Dashdot - Dashdot + Crtica Točka @@ -5238,14 +5365,49 @@ You can change that in the preferences. Boja linije - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index 0fb2b58bf0..a73f9fa794 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index f979224ff8..85610593f6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -44,12 +44,12 @@ Ennek az összetevőnek a tárgyát klónozza - + Other shapes that are appended to this object Ehhez a tárgyhoz csatolt egyéb alakzatok - + Other shapes that are subtracted from this object Ebből a tárgyból kivált egyéb alakzatok @@ -79,7 +79,7 @@ Ennek az objektumnak az összes függőleges felületének területe - + The area of the projection of this object onto the XY plane Ennek az objektumnak az XY síkra vetített vetületének területe @@ -114,7 +114,7 @@ Ennek a szint területnek a számított alapterülete - + The placement of this object Ennek az objektumnak az elhelyezése @@ -144,12 +144,12 @@ A profil felület forgása a kihúzási tengelye körül - + The length of this element, if not based on a profile Ennek az elemnek a hossza, ha nem profilon áll - + The width of this element, if not based on a profile Ennek az elemnek a szélessége, ha nem profilon áll @@ -194,22 +194,22 @@ Ennek a panelnek a területe - + The facemaker type to use to build the profile of this object Ennek az objektumnak a felület profiljához használt felületlétrehozó típus - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ennek az objektumnak a normál kihúzás iránya (automatikus normál (0,0,0) megtartása) - + The linked object A kapcsolt objektum - + The line width of the rendered objects A megjelenített objektumok vonalvastagsága @@ -349,7 +349,7 @@ Ennek az elemnek a magassága - + The structural nodes of this element Ennek az elemnek a szerkezeti csomópontjai @@ -614,132 +614,132 @@ A táblázat az eredmények nyomtatásához - + If false, non-solids will be cut too, with possible wrong results. Ha hamis, nem szilárd testeket is elvág, lehetséges rossz eredménnyel. - + The display length of this section plane A metszősík megjelenítési hossza - + The display height of this section plane A metszősík megjelenítési magassága - + The size of the arrows of this section plane Metszősík nyilainak a nagysága - + Show the cut in the 3D view A vágás 3D-s nézetének megjelenítése - + The rendering mode to use A használandó igazító mód - + If cut geometry is shown or not Ha a levágott geometria megjelenik vagy sem - + If cut geometry is filled or not Ha a levágott geometria kitöltött vagy sem - + The size of the texts inside this object A szöveg vastagsága ebben az objektumban - + If checked, source objects are displayed regardless of being visible in the 3D model Ha be van jelölve, a forrásobjektumok megjelenik függetlenül attól, hogy látható legyen, a 3D-s modellben - + The base terrain of this site Az alap domborzat, ezen az oldalon - + The postal or zip code of this site Ennek a területnek a postai vagy irányítószáma - + The city of this site Ehhez a városhoz tartozik a terület - + The country of this site Ehhez az országhoz tartozik a terület - + The latitude of this site Ehhez a területhez tartozó szélesség - + Angle between the true North and the North direction in this document A valódi észak és az ebben a dokumentumban lévő északi irány közti különbség - + The elevation of level 0 of this site Ennek az oldalnak a magassági 0 szintje - + The perimeter length of this terrain Ennek a terepnek a kerület hossza - + The volume of earth to be added to this terrain Ehhez a terephez adandó föld térfogata - + The volume of earth to be removed from this terrain Ebből a terepből kivonandó föld térfogata - + An extrusion vector to use when performing boolean operations Logikai művelet végzése során használatos kihúzási vektor - + Remove splitters from the resulting shape Távolítsa el az eredményül kapott alakzat darabolóit - + Show solar diagram or not Szoláris ábrát megjeleníti vagy nem - + The scale of the solar diagram Szoláris diagram léptéke - + The position of the solar diagram Szoláris diagram helyzete - + The color of the solar diagram Szoláris diagram színe @@ -785,81 +785,76 @@ - A zone this space is part of - A zóna melynek a terület egy része - - - The number of people who typically occupy this space Az emberek, akik általában elfoglalják ezt a teret - + The electric power needed to light this space in Watts A villamos energia Wattban amely szükséges ennek a helynek a megvilágításához - + The electric power needed by the equipment of this space in Watts Ehhez az eszközhöz ebben a helyiségben szükséges elektromos áram Wattban - + If True, Equipment Power will be automatically filled by the equipment included in this space Ha igaz, a felszerelt energiát a területen szereplő berendezések alapján automatikusan számítja - + The type of air conditioning of this space Ennek a helynek a légkondicionáló típusa - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data A szöveg megjelenítéséhez. $area, $label, $tag, $floor, $walls, $ceiling segítségével illessze be a megfelelő adatokat - + The name of the font Betűtípus neve - + The color of the area text A terület szöveg színe - + The size of the text font A betűtípus mérete - + The size of the first line of text A szöveg első sorának a mérete - + The space between the lines of text A szövegsorok közötti térköz - + The position of the text. Leave (0,0,0) for automatic position A szöveg helyzete. Hagyja (0,0,0) értéken az automatikus pozicionáláshoz - + The justification of the text A szöveges indoklása - + The number of decimals to use for calculated texts A számításhoz használt szövegek tizedesjegyek száma - + Show the unit suffix Mértékegység utótag megjelenítése @@ -939,102 +934,102 @@ Az eltolás a lépcső szegélye és a szerkezet között - + An optional extrusion path for this element Egy választható kihúzási útvonalat ehhez az elemhez - + The height or extrusion depth of this element. Keep 0 for automatic Ez az elem magassága vagy kihúzás nagysága. 0 megtartása automatikushoz - + A description of the standard profile this element is based upon A szokásos profil leírása amin ez az elem alapszik - + Offset distance between the centerline and the nodes line A középtengely és az egyenes csomópontok közti eltolás - + If the nodes are visible or not Ha a csomópontok láthatók vagy nem - + The width of the nodes line A csomópont egyenes vastagsága - + The size of the node points A csomópont pontok mérete - + The color of the nodes line A csomópont vonal színe - + The type of structural node Strukturális csomópont típusa - + Axes systems this structure is built on Ez a struktúrának erre a tengelyek rendszerre épül - + The element numbers to exclude when this structure is based on axes A kihúzandó elemek száma, ha az tengelyeken alapul - + If true the element are aligned with axes Ha igaz, akkor az elem tengelyekkel igazodik - + The length of this wall. Not used if this wall is based on an underlying object Ez a fal hossza. Nem használható, ha ennek a falnak alapjául más aláhúzott objektum szolgál - + The width of this wall. Not used if this wall is based on a face Ez a fal szélessége. Nem használható, ha ennek a falnak alapjául más felület szolgál - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Ennek a falnak a magassága. Automatikushoz legyen 0. Nem használt, amennyiben ez a fal szilárd testen áll - + The alignment of this wall on its base object, if applicable Ennek a falnak az alap objektumhoz való igazítása, ha lehetséges - + The face number of the base object used to build this wall Ennek a falnak a felépítéséhez használt alap objektumok száma - + The offset between this wall and its baseline (only for left and right alignments) Ennek a falnak és a kiindulási pontja (csak a bal és jobb nyomvonalak) közötti eltolás - + The normal direction of this window Ennek az ablaknak a normál iránya - + The area of this window Ennek az ablaknak a területe @@ -1049,7 +1044,7 @@ Egy választható kiegészítő elhelyezés a profil hozzáadásához, mielőtt kihúzná - + Opens the subcomponents that have a hinge defined Megnyitja az al-összetevőket, melyekhez egy zsanér van meghatározva @@ -1089,12 +1084,12 @@ A réteg vastagságok listája - + The line color of the projected objects A vetített objektumok vonal színe - + The color of the cut faces (if turned on) Vágott felületek színe (ha be van kapcsolva) @@ -1104,7 +1099,7 @@ Az átfedés a futófelület aljától a tartógerendák tetejéig - + The number of the wire that defines the hole. A value of 0 means automatic A lyukakat meghatározó dróthálók száma. A 0 érték azt jelenti, hogy automatikus @@ -1194,7 +1189,7 @@ Betonacél egyedi térközzel - + Shape of rebar Betonacél alakja @@ -1204,17 +1199,17 @@ Fordítsa a tetőt irányba, ha rossz irányban van - + Shows plan opening symbols if available Kijelzi a terv nyitó szimbólumait, ha rendelkezésre állnak - + Show elevation opening symbols if available Kijelzi a magassági nyitó szintek szimbólumait, ha rendelkezésre állnak - + The objects that host this window Az objektumok, amelyek ebben az ablakban benne vannak @@ -1269,12 +1264,12 @@ Ennek a szintnek a (0,0,0) pont szintje - + The shape of this object Ennek a tárgynak az alakja - + The line width of this object Ennek a tárgynak a vonalvastagsága @@ -1414,47 +1409,47 @@ Ha az érték igaz, a csatolt fájlból felhasznált szín folyamatosan frissül - + The objects that must be considered by this section plane. Empty means the whole document. Objektum a metszés nézethez. Üresen hagyva az egész dokumentumot jelenti. - + The transparency of this object Ennek a tárgynak az átláthatósága - + The color of this object Ennek a tárgynak a színe - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A tényleges vágás és a kivágási sík közötti távolság (hagyja nagyon kis méretűre, de ne legyen nulla) - + The street and house number of this site, with postal box or apartment number if needed Ennek a területnek az utca és házszáma, posta fiókkal vagy a lakás számmal szükség esetén - + The region, province or county of this site Ehhez a területhez tartozó régió, tartomány vagy megye - + A url that shows this site in a mapping website Egy Url cím ami leképzett weboldalon jeleníti meg ezt az oldalt - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates A modell (0,0,0) eredetű és a geocoordináták által megjelölt pont közötti választható eltolás - + Specifies if this space is internal or external Itt adható meg, ha ez a terület belső vagy külső @@ -1496,208 +1491,238 @@ The 'left outline' of stairs - A 'bal körvonala' a lépcsőknek + A lépcső 'bal körvonala' The 'left outline' of all segments of stairs - A 'bal oldali vázlat' az összes szegmens a lépcsőn + A 'bal oldali körvonala' a lépcső összes szegmensének - + Enable this to make the wall generate blocks Engedélyezze ezt, hogy a fal hozza létre a blokkokat - + The length of each block Minden egyes blokk hossza - + The height of each block Minden egyes blokk magassága - + The horizontal offset of the first line of blocks Az első sor blokkok vízszintes eltolása - + The horizontal offset of the second line of blocks A második sor blokkjainak vízszintes eltolása - + The size of the joints between each block A blokkok közti fugák mérete - + The number of entire blocks Az összes blokkok száma - + The number of broken blocks A hibás blokkok száma - + The components of this window Ennek az ablaknak az összetevői - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. A nyílás mélysége melyet ez az ablak képez a hordozó felületen. Ha az értéke 0 akkor automatikusan számolja ki. - + An optional object that defines a volume to be subtracted from hosts of this window A választható tárgy, mely meghatározza a területet amit az ablak a gazda területből kivesz - + The width of this window Ennek az ablaknak a szélessége - + The height of this window Ennek az ablaknak a magassága - + The preset number this window is based on Az előre beállított szám ami ennek az ablaknak az alapja - + The frame size of this window Ennek az ablaknak a keret mérete - + The offset size of this window Ennek az ablaknak az eltolás mérete - + The width of louvre elements Zsalu elemek szélessége - + The space between louvre elements Zsalu elemek közötti távolság - + The number of the wire that defines the hole. If 0, the value will be calculated automatically A furatokat meghatározó dróthálók száma. Ha értéke 0, akkor automatikusan kiszámítja Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Megadja, hogy az objektum áthelyezése helyett áthelyezi-e annak alapját A single section of the fence - A single section of the fence + A kerítés egyetlen szakasza A single fence post - A single fence post + Egyetlen kerítés oszlop The Path the fence should follow - The Path the fence should follow + Az útvonal melyet a kerítésnek követnie kell The number of sections the fence is built of - The number of sections the fence is built of + A kerítést felépítő szakaszok száma The number of posts used to build the fence - The number of posts used to build the fence + A kerítés építésére használt oszlopok száma - + The type of this object - The type of this object + Ennek a tárgynak a típusa IFC data - IFC data + IFC Ipari alapítvány adatok IFC properties of this object - IFC properties of this object + Az objektum IFC Ipari alapítvány tulajdonságai - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Az IFC-attribútumok leírása még nincs megvalósítva + + + + If True, resulting views will be clipped to the section plane area. + Ha az érték Igaz, a rendszer az eredményül kapott nézeteket a metszősík területére levágja. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Az elemhez tartozó anyag színének használata metszeti kitöltésként. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Ha beállított az "igazi Észak" az egész geometria lesz forgatva, hogy megfeleljen az oldal igazi északi részéhez - + + Show compass or not + Tájoló megjelenítésének ki/be kapcsolása + + + + The rotation of the Compass relative to the Site + Az iránytű forgatása az oldalhoz viszonyítva + + + + The position of the Compass relative to the Site placement + Az iránytű elhelyezkedése az oldal elhelyezkedéséhez viszonyítva + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + A deklináció értékének frissítése az iránytű forgatásának alapján The thickness of the risers - The thickness of the risers + Az emelkedés vastagsága The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + A 'jobb oldali körvonala' a lépcső összes szegmensének + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Összetevők @@ -1717,12 +1742,12 @@ Tengelyek létrehozása - + Remove Törlés - + Add Hozzáad @@ -1832,87 +1857,87 @@ Nézete a - + Create Section Plane Szakasz sík létrehozása - + Create Site Oldal létrehozása - + Create Structure Struktúra létrehozása - + Create Wall Fal létrehozása - + Width Szélesség - + Height Magasság - + Error: Invalid base object Hiba: Érvénytelen alap objektum - + This mesh is an invalid solid A háló egy érvénytelen szilárd test - + Create Window Ablak létrehozása - + Edit Szerkesztés - + Create/update component Létrehozni/frissíteni összetevőt - + Base 2D object Alap 2D objektumot - + Wires Drótvázak - + Create new component Új összetevő létrehozásához - + Name Név - + Type Típus - + Thickness Vastagság @@ -1922,7 +1947,7 @@ Hiba: Nem állapítható meg a karakterkódolás - + file %s successfully created. a program sikeresen létrehozta a %s fájl. @@ -1972,32 +1997,32 @@ Lépcső létrehozása - + Length Hossz - + Error: The base shape couldn't be extruded along this tool object Hiba: Az alap alakzatot nem lehet kihúzni ennek az eszköz objektumnak a mentén - + Couldn't compute a shape Nem tudott létrehozni alakzatot - + Merge Wall Fal egyesítése - + Please select only wall objects Kérem csak fal objektumokat válasszon ki - + Merge Walls Falak egyesítése @@ -2012,7 +2037,7 @@ Hiba a tárgy alakjának számítása közben - + Create Structural System Szerkezeti rendszer létrehozása @@ -2172,7 +2197,7 @@ Ha a Futás = 0 akkor a Futást úgy számolja, hogy a magasság ugyanaz mint a Magasság (mm) - + Create Component Összetevő létrehozás @@ -2187,17 +2212,17 @@ Ha a Futás = 0 akkor a Futást úgy számolja, hogy a magasság ugyanaz mint a Falat csak az Alkotórész vagy Háló objektumhoz húzhat - + Set text position Szöveg helyzetének beállítása - + Category Kategória - + Key Kulcs @@ -2207,12 +2232,12 @@ Ha a Futás = 0 akkor a Futást úgy számolja, hogy a magasság ugyanaz mint a Érték - + Unit Egység - + Create IFC properties spreadsheet IFC tulajdonság számolótábla létrehozása @@ -2242,7 +2267,7 @@ Ha a Futás = 0 akkor a Futást úgy számolja, hogy a magasság ugyanaz mint a Panel lap létrehozása - + Facemaker returned an error Felületlétrehozás hibával tért vissza @@ -2267,137 +2292,137 @@ Ha a Futás = 0 akkor a Futást úgy számolja, hogy a magasság ugyanaz mint a Csatlakozó létrehozása - + Precast elements Előre gyártott elemek - + Slab type Burkolólap típusa - + Chamfer Letörés - + Dent length Mélyedés hossza - + Dent width Mélyedés szélessége - + Dent height Mélyedés magassága - + Slab base Lap kiindulópontja - + Number of holes Furatok száma - + Major diameter of holes Lyukak fő átmérője - + Minor diameter of holes Lyukak alárendelt átmérője - + Spacing between holes Lyukak közötti térköz - + Number of grooves Barázdák száma - + Depth of grooves Barázdák mélysége - + Height of grooves Barázdák magassága - + Spacing between grooves Barázdák közötti térköz - + Number of risers Emelkedések száma - + Length of down floor Alsó szint hossza - + Height of risers Emelkedések magassága - + Depth of treads Futófelület mélysége - + Precast options Előregyártott alkatrész gyártás opciók - + Dents list Mélyedések listája - + Add dent Mélyedés hozzáadása - + Remove dent Mélyedés eltávolítása - + Slant Ferde - + Level Szint - + Rotation Forgatás - + Offset Eltolás @@ -2422,59 +2447,59 @@ Ha a Futás = 0 akkor a Futást úgy számolja, hogy a magasság ugyanaz mint a Ütemezés - + There is no valid object in the selection. Site creation aborted. Nem található érvényes objektum a kiválasztásban. Oldal létrehozás megszakítva. - + Node Tools Csomópont eszközök - + Reset nodes Csomópontok alaphelyzetbe állítása - + Edit nodes Csomópontok szerkesztése - + Extend nodes Csomópontok kiterjesztése - + Extends the nodes of this element to reach the nodes of another element Kiterjeszti ennek az elemnek a csomópontjait, hogy elérje a csomópontjait egy másik elemnek - + Connect nodes Csomópntok csatlakoztatása - + Connects nodes of this element with the nodes of another element Csatlakoztatja ennek az elemnek a csomópontjait egy másik elem csomópontjaival - + Toggle all nodes Összes csomópont átkapcsolása - + Toggles all structural nodes of the document on/off A dokumentum összes szerkezeti csomópontjának átkapcsolása - + Intersection found. Metszéspont található. @@ -2486,22 +2511,22 @@ Oldal létrehozás megszakítva. Ajtó - + Hinge Zsanér - + Opening mode Nyitás módja - + Get selected edge Kiválasztott élt kapja - + Press to retrieve the selected edge Nyomja meg a kiválasztott él lekéréséhez @@ -2531,17 +2556,17 @@ Oldal létrehozás megszakítva. Új réteg - + Wall Presets... Fal előre beállított értékei... - + Hole wire Drótháló lyuk - + Pick selected Véletlenszerűen kiválasztott @@ -2626,17 +2651,17 @@ Oldal létrehozás megszakítva. Ennek az objektumnak nincs felülete - + Space boundaries Terület határvonal - + Error: Unable to modify the base object of this wall Hiba: Nem lehet módosítani ennek a falnak az alap objektumát - + Window elements Ablak elemek @@ -2748,7 +2773,7 @@ Building creation aborted. Minden jó! nincs probléma - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Az objektum nem rendelkezik IfcProperties attribútummal. Mégse hozzon létre számolótáblát ehhez az objektumhoz: @@ -2813,10 +2838,10 @@ Building creation aborted. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Bármin tehet a Szint objektumba, csak a következő objektumokból: Telket, Épületet vagy Szintet. +Szint objektumnak tilos Telek, Épület, vagy Szint objektumok elfogadása. +Telek, Épület és Szint objektumokat eltávolítja a kijelölésből. +A testreszabásokban módosíthatja ezt. @@ -2931,47 +2956,47 @@ Padló létrehozása megszakítva. Ehhez az ütemezéshez nincs táblázat csatolva - + Section plane settings Metszősík beállítások - + Objects seen by this section plane: Metszősík által látható tárgyak: - + Section plane placement: Metszősík elhelyezése: - + Rotate X Forgatás X - + Rotate Y Forgatás Y - + Rotate Z Forgatás Z - + Resize Átméretezés - + Center Középre - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Más objektum eltávolításra kerül a kiválasztásból. Megjegyzés: Megváltoztathatja a beállításokban. - + Choose another Structure object: Válasszon ki egy másik szerkezeti objektumot: - + The chosen object is not a Structure A kiválasztott objektum nem szerkezet - + The chosen object has no structural nodes A kiválasztott objektumnak nincsenek szerkezeti csomópontjai - + One of these objects has more than 2 nodes Egy ezek közül az objektumok közül több mint 2 csomóponttal rendelkezik - + Unable to find a suitable intersection point Nem képes találni egy megfelelő metszéspontot - + Intersection found. Metszéspont található. - + The selected wall contains no subwall to merge A kijelölt fal nem tartalmaz összeegyeztethető fal részleteket - + Cannot compute blocks for wall Képtelen blokkokat számolni a falhoz - + Choose a face on an existing object or select a preset Válasszon egy felületet a meglévő objektumon vagy válasszon egy előre beállítottat - + Unable to create component Nem sikerült létrehozni egy összetevőt - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire A hordozó objektumon lévő furat meghatározásához használt drótháló száma. A nulla értékkel automatikusan a legnagyobb dróthálót fogadja el - + + default + alapértelmezett - + If this is checked, the default Frame value of this window will be added to the value entered here Ha ez be van jelölve, az ablak keret alapérték hozzáadódik az itt megadott értékhez - + If this is checked, the default Offset value of this window will be added to the value entered here Ha ez be van jelölve, az ablak eltolás alapérték hozzáadódik az itt megadott értékhez - + pycollada not found, collada support is disabled. pycollada nem található, collada támogatás letiltva. @@ -3092,7 +3117,7 @@ Megjegyzés: Megváltoztathatja a beállításokban. Hiba: a IfcOpenShell verziója túl régi - + Successfully written Sikeresen kiírva @@ -3102,7 +3127,7 @@ Megjegyzés: Megváltoztathatja a beállításokban. Találtam egy görbét tartalmazó alakzatot, háromszögesítés - + Successfully imported Sikeresen importálva @@ -3112,50 +3137,165 @@ Megjegyzés: Megváltoztathatja a beállításokban. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Bármin tehet az Épület objektumba, csak nem Telket vagy Épületet. +Épület objektumnak tilos Telek és Épület objektumok elfogadása. +Telek és épület objektumok el lesznek távolítva a kijelölésből. +Módosíthatja ezt a beállításokban. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Kijelölt elemek eltávolítása a fenti listából - + Add selected Kiválasztott hozzáadása - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Kijelölt elem(ek) hozzáadása a metszősík hatóköréhez + + + + Rotates the plane along the X axis + Sík forgatása az X tengely körül - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Sík forgatása az Y tengely körül - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Sík forgatása a Z tengely körül - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Sík átméretezése a fenti listában szereplő elemekre - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Sík középpontja a fenti listában szereplő elemeken - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Gerenda első beépítési pontja + + + + Base point of column + Oszlop alappontja + + + + Next point + Következő pont + + + + Structure options + Tartószerkezeti lehetőségek + + + + Drawing mode + Rajzolási mód + + + + Beam + Gerenda + + + + Column + Pillér + + + + Preset + Előre beállított + + + + Switch L/H + Kapcsoló H/M + + + + Switch L/W + Kapcsoló H/SZ + + + + Con&tinue + Folytatás + + + + First point of wall + Fal első pontja + + + + Wall options + Fal lehetőségek + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + MultiMaterial elemek a dokumentumban. Fal típusok definiálásához. + + + + Alignment + Igazítás + + + + Left + Bal + + + + Right + Jobb + + + + Use sketches + Vázlatok használata + + + + Structure + Felépítés + + + + Window + Ablak + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Ellenőrzi a kijelölt objektumok problémáit - - - Explore the contents of an IFC file - Fedezze fel egy Ifc fájl tartalmát - Arch_CloneComponent - + Clone component Összetevő klónozása - + Clones an object as an undefined architectural component Klónoz egy objektumot egy nem definiált építészeti összetevőként @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Összetevő - + Creates an undefined architectural component Létrehoz egy meghatározatlan építészeti összetevőt @@ -3443,14 +3578,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Kerítés - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Kerítésobjektum létrehozása a kijelölt szakaszból, oszlopból és útvonalból @@ -3542,23 +3677,15 @@ You can change that in the preferences. A felületek jelöléseinek elrejtése - - Arch_IfcExplorer - - - Ifc Explorer - IFC Böngésző - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFC számolótábla létrehozása... - + Creates a spreadsheet to store IFC properties of an object. Készít egy számolótáblát egy objektum ifc tulajdonságainak tárolására. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Falak egyesítése - + Merges the selected walls, if possible Egyesíti a kijelölt falakat, ha lehetséges @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Rész sík - + Creates a section plane object, including the selected objects Létrehoz egy szakasz sík objektumot, beleértve a kijelölt objektumokat @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Oldal - + Creates a site object including selected objects. Létrehoz egy Oldal objektumot, beleértve a kijelölt objektumokat. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Felépítés - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Létrehoz egy objektum struktúrát vázlatból vagy egy kijelölt objektumból (vázlat, vonal, felület vagy szilárd test) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Felmérés - + Starts survey Felmérés indítása @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep jelölő zászló - + Force an object to be exported as Brep or not Erőltessen egy tárgyat Brep exportálásra vagy sem @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Al-összetevők ki-/ bekapcsolása - + Shows or hides the subcomponents of this object Megjeleníti vagy elrejti ennek az objektumnak az al-összetevőit @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Ablak - + Creates a window object from a selected object (wire, rectangle or sketch) Ablak objektumot hoz létre a kijelölt objektumból (vonalas, téglalap vagy vázlat) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Kamera helyzet írása @@ -4653,7 +4780,7 @@ You can change that in the preferences. Átlátszóság: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Néhány IFC nézegető nem szereti a kihúzott állapotban exportált objektumokat. Ezzel erőltetve az összes objektum BREP geometriaként kerül kivitelre. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Vastagság - + Force export as Brep Erőltetett Exportálás Brep-ként @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Exportálási beállítások @@ -4933,22 +5060,22 @@ You can change that in the preferences. Négyzetek engedélyezése - + Use triangulation options set in the DAE options page DAE beállítások lapon található háromszögelés beállításokat használjon - + Use DAE triangulation options DAE háromszögelés beállításokat használjon - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Ívelt formák, amely nem ábrázolható görbeként az IFC-ben, azokat lapos felületté bontjuk. Ha ez bejelölt, néhány további számítás történik sík felületek csatlakoztatásához. - + Join coplanar facets when triangulating Csatlakozzon párhuzamos sík felületeket háromszögelésnél @@ -4988,12 +5115,12 @@ You can change that in the preferences. Ifc tulajdonságok importálása egy számolótábla - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Ha UID nélkül exportálása az objektumokat, a létrehozott UID a FreeCAD objektumban tárolódik, a legközelebbi újrafelhasználáskor ennek az objektumnak az exportálásakor, amely kisebb különbségekkel rendelkeznek a verziók között - + Store IFC universal ID in FreeCAD objects IFC egyetemes azonosító tárolása a FreeCAD objektumokban @@ -5063,17 +5190,17 @@ You can change that in the preferences. Többrétegű falak felosztása - + Warning, experimental feature! Vigyázat, kísérleti funkció! - + Use IfcOpenShell serializer if available IfcOpenShell szerializáló használata, ha elérhető - + Export 2D objects as IfcAnnotations 2D objektumok exportálása mint IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Nézetbe illesztés az importáláskor - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Ha ez be van jelölve, minden FreeCAD tárgy tulajdonságait tárolja az exportált objektum, lehetővé teszi, a teljes parametrikus modell ismételt létrehozását újra importálákor. - + Export full FreeCAD parametric model Teljes FreeCAD parametrikus modell export @@ -5158,59 +5285,59 @@ You can change that in the preferences. Kizárási lista: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Ha ez be van kapcsolva, akkor a hasonló elemek csak egyszer lesznek benne a fájlban. Ezzel nagyon lecsökkenthető a fájlméret, de emberek számára sokkal nehezebben lesz olvasható - + Reuse similar entities Hasonló szerkezetek újra használása - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Ha lehetséges, extrudált téglalapok IFC objektumokat mint IfcRectangleProfileDef exportáljuk. Azonban néhány más alkalmazás közismerten problémába ütközik ennek a szerkezetnekaz importálása közben. Ha ez történik, ki tudot kapcsolni ezt itt (az összes profil mint IfcArbitraryClosedProfileDef exportálhatók). - + Disable IfcRectangleProfileDef IfcRectangleProfileDef letiltása Set "Move base" property to True by default - Set "Move base" property to True by default + Alapértelmezés szerint "Alap mozgatása" tulajdonságot állítsa Igazra IFC version - IFC version + IFC verzió The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + Az IFC verziója megváltoztatja a támogatott tulajdonságokat és termékeket IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2x3 Spaces - Spaces + Térközök Line style: - Line style: + Vonalstílus: @@ -5220,17 +5347,17 @@ You can change that in the preferences. Dashed - Dashed + Szaggatott Dotted - Dotted + Pontozott Dashdot - Dashdot + Pont-vonal @@ -5238,14 +5365,49 @@ You can change that in the preferences. Vonalszín - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Egyes IFC típusok, mint az IfcWall vagy az IfcBeam olyan különleges szabványos változatok, mint az IfcWallStandardCase vagy az IfcBeamStandardCase. Ha ez a beállítás be van kapcsolva, akkor a FreeCAD automatikusan exportálja ezeket az objektumokat szabványos esetként, amikor a szükséges feltételek teljesülnek. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_id.qm b/src/Mod/Arch/Resources/translations/Arch_id.qm index 5ee1d78dd1..465def2222 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_id.qm and b/src/Mod/Arch/Resources/translations/Arch_id.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index 7fae1653f2..a9c806f37e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -44,12 +44,12 @@ Tujuan komponen ini adalah kloning - + Other shapes that are appended to this object Bentuk-bentuk lain yang ditambahkan ke objek ini - + Other shapes that are subtracted from this object Bentuk-bentuk lain yang akan dikurangi dari objek ini @@ -79,7 +79,7 @@ Daerah wajah-wajah vertikal yang semua objek ini - + The area of the projection of this object onto the XY plane Daerah proyeksi objek ini ke bidang XY @@ -114,7 +114,7 @@ Daerah dihitung lantai lantai ini - + The placement of this object Penempatan objek ini @@ -144,12 +144,12 @@ Rotasi profil di sekitar sumbu ekstrusi - + The length of this element, if not based on a profile Panjang elemen ini, jika tidak didasarkan pada profil - + The width of this element, if not based on a profile Lebar elemen ini, jika tidak didasarkan pada profil @@ -194,22 +194,22 @@ Wilayah dari panel ini - + The facemaker type to use to build the profile of this object Tipe facemaker menggunakan untuk membangun profil objek ini - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Arah normal ekstrusi objek ini (tetap (0,0,0) untuk otomatis normal) - + The linked object Objek terkait - + The line width of the rendered objects Lebar garis benda-benda yang diberikan @@ -349,7 +349,7 @@ Tinggi dari elemen ini - + The structural nodes of this element Struktural node elemen ini @@ -614,132 +614,132 @@ Spreadsheet untu mencetak hasil - + If false, non-solids will be cut too, with possible wrong results. Jika salah, non-padat akan dipotong juga, dengan kemungkinan hasil yang salah. - + The display length of this section plane Panjang tampilan bidang bagian ini - + The display height of this section plane Tinggi tampilan bidang bagian ini - + The size of the arrows of this section plane Ukuran panah bidang bagian ini - + Show the cut in the 3D view Menunjukkan potongan dalam tampilan 3D - + The rendering mode to use Mode penyiapan yang dipakai - + If cut geometry is shown or not Jika potongan geometri digunakan atau tidak - + If cut geometry is filled or not Jika potongan geometri diisi atau tidak - + The size of the texts inside this object Ukuran teks didalam objek ini - + If checked, source objects are displayed regardless of being visible in the 3D model Kalau dicentang, sumber objek ditampilkan tanpa memperhatikan untuk menjadi tampil dalam model 3D - + The base terrain of this site Lahan dasar dari tempat ini - + The postal or zip code of this site Kode pos atau kode Zip tempat ini - + The city of this site Kota tempat ini - + The country of this site Negara tempat ini - + The latitude of this site Garis lintang tempat ini - + Angle between the true North and the North direction in this document Sudut antara utara sebenarnya dengan arah utara yang ditunjuk oleh dokumen ini - + The elevation of level 0 of this site Ketinggian level 0 tempat ini - + The perimeter length of this terrain Panjang batas pinggir, lahan ini - + The volume of earth to be added to this terrain Volume bumi yang ditambahkan ke tempat ini - + The volume of earth to be removed from this terrain Volume bumi yang dibuang dari tempat ini - + An extrusion vector to use when performing boolean operations Vektor ekstrusi yang digunakan saat melakukan operasi boolean - + Remove splitters from the resulting shape Menghilangkan pemisah dari bentuk yang dihasilkan - + Show solar diagram or not Menampilkan diagram matahari atau tidak - + The scale of the solar diagram Skala diagram matahari - + The position of the solar diagram Posisi diagram matahari - + The color of the solar diagram Warna diagram matahari @@ -785,81 +785,76 @@ - A zone this space is part of - Sebuah zona ruang ini adalah bagian dari - - - The number of people who typically occupy this space Jumlah orang yang biasanya menempati ruang ini - + The electric power needed to light this space in Watts Tenaga listrik yang dibutuhkan untuk menyalakan ruang ini di Watts - + The electric power needed by the equipment of this space in Watts Tenaga listrik yang dibutuhkan oleh peralatan ruang ini di Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Jika Benar, Power Peralatan akan otomatis terisi oleh peralatan yang termasuk dalam ruang ini - + The type of air conditioning of this space Tipe Ac dari ruang ini - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Teks ini untuk menunjukkan penggunaan $area, $label, $tag, $floor, $walls, $ceiling untuk memasukkan data masing-masing - + The name of the font Nama font - + The color of the area text Warna teks area - + The size of the text font Ukuran teksnya - + The size of the first line of text Ukuran baris pertama dari teks - + The space between the lines of text Ruang antara garis teks - + The position of the text. Leave (0,0,0) for automatic position Posisi teks. Tinggalkan (0,0,0) untuk posisi otomatis - + The justification of the text Pembenaran teks - + The number of decimals to use for calculated texts Jumlah desimal yang digunakan untuk teks yang dihitung - + Show the unit suffix Tampilkan akhiran unit @@ -939,102 +934,102 @@ mengimbangi antara perbatasan tangga dan struktur - + An optional extrusion path for this element Sebuah ekstrusi opsional jalan untuk elemen ini - + The height or extrusion depth of this element. Keep 0 for automatic Ketinggian atau kedalaman ekstrusi dari elemen ini. Simpan 0 untuk otomatis - + A description of the standard profile this element is based upon Penjelasan tentang profil standar yang menjadi dasar elemen ini - + Offset distance between the centerline and the nodes line Offset jarak antara garis tengah dan garis nodes - + If the nodes are visible or not Jika nodanya terlihat atau tidak - + The width of the nodes line Lebar dari node baris - + The size of the node points Ukuran titik simpul - + The color of the nodes line Warna garis nodes - + The type of structural node Jenis simpul struktural - + Axes systems this structure is built on Sistem sumbu struktur ini dibangun di atas - + The element numbers to exclude when this structure is based on axes Nomor elemen untuk dikecualikan saat struktur ini didasarkan pada sumbu - + If true the element are aligned with axes Jika benar elemennya sejajar dengan sumbu - + The length of this wall. Not used if this wall is based on an underlying object Panjang dinding ini. Tidak digunakan jika dinding ini didasarkan pada objek yang mendasarinya - + The width of this wall. Not used if this wall is based on a face Lebar dinding ini. Tidak digunakan jika dinding ini didasarkan pada wajah - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Tinggi dinding ini. Simpan 0 untuk otomatis. Tidak digunakan jika dinding ini berdasarkan padatan - + The alignment of this wall on its base object, if applicable Penyelarasan dinding ini pada objek dasarnya, jika dapat diterapkan - + The face number of the base object used to build this wall Jumlah permukaan dari objek dasar yang digunakan untuk membangun dinding ini - + The offset between this wall and its baseline (only for left and right alignments) Nilai penutup selisih, antara dinding dan garis dasarnya (hanya untuk rata kiri dan kanan) - + The normal direction of this window Arah normal jendela ini - + The area of this window Wilayah jendela ini @@ -1049,7 +1044,7 @@ Sebuah pilihan penempatan tambahan, untuk ditambahkan pada profil, sebelum mengextrusinya - + Opens the subcomponents that have a hinge defined Membuka subkomponen yang memiliki sebuah keterkaitan yang didefinisikan @@ -1089,12 +1084,12 @@ Daftar dari lapisan ketebalan - + The line color of the projected objects Warna garis benda-benda yang diproyeksikan - + The color of the cut faces (if turned on) Warna permukaan potong (jika diaktifkan) @@ -1104,7 +1099,7 @@ Tumpang tindih stringer di atas bagian bawah tapak - + The number of the wire that defines the hole. A value of 0 means automatic Jumlah kabel yang mendefinisikan lubang. Nilai 0 berarti otomatis @@ -1194,7 +1189,7 @@ Jarak khusus dari rebar - + Shape of rebar Bentuk rebar @@ -1204,17 +1199,17 @@ Balikkan arah atap jika salah jalan - + Shows plan opening symbols if available Menunjukkan simbol pembuka rencana jika tersedia - + Show elevation opening symbols if available Tampilkan simbol pembuka ketinggian jika tersedia - + The objects that host this window Objek yang meng-host jendela ini @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponen @@ -1717,12 +1742,12 @@ Create Axis - + Remove Menghapus - + Add Menambahkan @@ -1832,87 +1857,87 @@ Pemandangan dari - + Create Section Plane Membuat bidang bagian - + Create Site Membuat situs - + Create Structure Buat struktur - + Create Wall Membuat Dinding - + Width Lebar - + Height Tinggi - + Error: Invalid base object Kesalahan: Objek dasar tidak valid - + This mesh is an invalid solid Mesh ini adalah solid yang tidak valid - + Create Window Membuat Jendela - + Edit Edit - + Create/update component Membuat/pembaruan komponen - + Base 2D object Dasar objek 2D - + Wires Kabel - + Create new component Membuat komponen baru - + Name Nama - + Type Jenis - + Thickness Thickness @@ -1922,7 +1947,7 @@ Kesalahan: Tidak dapat menentukan character encoding - + file %s successfully created. %s file berhasil dibuat. @@ -1972,32 +1997,32 @@ Membuat tangga - + Length Panjangnya - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Silahkan pilih hanya benda dinding - + Merge Walls Gabungkan Dinding @@ -2012,7 +2037,7 @@ Kesalahan menghitung bentuk objek ini - + Create Structural System Buat Sistem Struktural @@ -2162,7 +2187,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Tinggi (mm) - + Create Component Buat Komponen @@ -2177,17 +2202,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Dinding hanya dapat didasarkan pada Bagian atau Mesh benda - + Set text position Atur posisi teks - + Category Kategori - + Key Kunci @@ -2197,12 +2222,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Nilai - + Unit Satuan - + Create IFC properties spreadsheet Buat spreadsheet properti IFC @@ -2232,7 +2257,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Buat Lembar Panel - + Facemaker returned an error Facemaker mengembalikan sebuah kesalahan @@ -2257,137 +2282,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Buat Konektor - + Precast elements Elemen pracetak - + Slab type Tipe slab - + Chamfer Talang - + Dent length Panjang dent - + Dent width Lebar Dent - + Dent height Tinggi badan - + Slab base Alas slab - + Number of holes Jumlah lubang - + Major diameter of holes Diameter lubang yang besar - + Minor diameter of holes Diameter lubang kecil - + Spacing between holes Jarak antar lubang - + Number of grooves Jumlah alur - + Depth of grooves Kedalaman alur - + Height of grooves Tinggi alur - + Spacing between grooves Jarak antar alur - + Number of risers Jumlah anak tangga - + Length of down floor Panjang lantai bawah - + Height of risers Tinggi anak tangga - + Depth of treads Kedalaman tapak - + Precast options Pilihan pracetak - + Dents list Daftar dents - + Add dent Tambahkan penyok - + Remove dent Hapus penyok - + Slant Miring - + Level Tingkat - + Rotation Perputaran - + Offset Mengimbangi @@ -2412,59 +2437,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Susunan acara - + There is no valid object in the selection. Site creation aborted. Tidak ada objek yang valid dalam seleksi. Pembuatan situs dibatalkan. - + Node Tools Alat node - + Reset nodes Setel ulang node - + Edit nodes Mengedit node - + Extend nodes Memperpanjang node - + Extends the nodes of this element to reach the nodes of another element Memperpanjang simpul elemen ini untuk mencapai simpul elemen lain - + Connect nodes Hubungkan node - + Connects nodes of this element with the nodes of another element Menghubungkan simpul elemen ini dengan simpul elemen lain - + Toggle all nodes Toggle semua node - + Toggles all structural nodes of the document on/off Mengaktifkan semua simpul struktur dokumen secara hidup/mati - + Intersection found. Persimpangan ditemukan. @@ -2476,22 +2501,22 @@ Pembuatan situs dibatalkan. Pintu - + Hinge Engsel - + Opening mode Mode pembuka - + Get selected edge Dapatkan tepi yang dipilih - + Press to retrieve the selected edge Tekan untuk mengambil tepi yang dipilih @@ -2521,17 +2546,17 @@ Pembuatan situs dibatalkan. Layer baru - + Wall Presets... Preset Dinding ... - + Hole wire Kawat lubang - + Pick selected Pilih yang dipilih @@ -2616,17 +2641,17 @@ Pembuatan situs dibatalkan. Objek ini tidak memiliki wajah - + Space boundaries Batas ruang - + Error: Unable to modify the base object of this wall Kesalahan: Tidak dapat memodifikasi objek dasar dinding ini - + Window elements Elemen jendela @@ -2738,7 +2763,7 @@ Building creation aborted. Bagus! Tidak ada masalah ditemukan - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Obyek tidak memiliki atribut IfcProperties. Membatalkan spreadsheet penciptaan untuk obyek: @@ -2921,47 +2946,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Pusat - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2972,77 +2997,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3082,7 +3107,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Berhasil diimpor @@ -3108,45 +3133,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Tambahkan yang dipilih - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Kiri + + + + Right + Kanan + + + + Use sketches + Use sketches + + + + Structure + Struktur + + + + Window + Jendela + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3359,21 +3499,16 @@ You can change that in the preferences. Checks the selected objects for problems Memeriksa objek yang dipilih untuk masalah - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Komponen klon - + Clones an object as an undefined architectural component Klon objek sebagai komponen arsitektur undefined @@ -3394,12 +3529,12 @@ You can change that in the preferences. Arch_Component - + Component Komponen - + Creates an undefined architectural component Membuat komponen arsitektur yang tidak terdefinisi @@ -3433,12 +3568,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3532,23 +3667,15 @@ You can change that in the preferences. Indeks wajah untuk disembunyikan - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Buat spreadsheet IFC... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3577,12 +3704,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Gabungkan Dinding - + Merges the selected walls, if possible Gabungkan dinding yang dipilih, jika memungkinkan @@ -3788,12 +3915,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Bagian pesawat - + Creates a section plane object, including the selected objects Membuat bagian objek pesawat, termasuk objek yang dipilih @@ -3814,12 +3941,12 @@ You can change that in the preferences. Arch_Site - + Site Situs - + Creates a site object including selected objects. Membuat objek situs termasuk objek yang dipilih. @@ -3866,12 +3993,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Membuat objek struktur dari nol atau dari objek yang dipilih (sketsa, kawat, wajah atau padat) @@ -3879,12 +4006,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survei - + Starts survey Mulai survei @@ -3892,12 +4019,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Beralih bendera IFC Brep - + Force an object to be exported as Brep or not Pakai benda yang akan diekspor sebagai Brep atau tidak @@ -3905,12 +4032,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Menunjukkan atau menyembunyikan subkomponen dari objek ini @@ -3931,12 +4058,12 @@ You can change that in the preferences. Arch_Window - + Window Jendela - + Creates a window object from a selected object (wire, rectangle or sketch) Membuat objek jendela dari objek yang dipilih ( kawat, persegi panjang atau sketsa) @@ -4207,7 +4334,7 @@ You can change that in the preferences. Draft - + Writing camera position Menulis posisi kamera @@ -4643,7 +4770,7 @@ You can change that in the preferences. Transparansi: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Beberapa pemirsa IFC tidak menyukai objek yang diekspor sebagai ekstrusi. Gunakan ini untuk memaksa semua benda diekspor sebagai geometri BREP. @@ -4683,7 +4810,7 @@ You can change that in the preferences. Thickness - + Force export as Brep Paksa ekspor sebagai Brep @@ -4713,7 +4840,7 @@ You can change that in the preferences. DAE - + Export options Pilihan ekspor @@ -4923,22 +5050,22 @@ You can change that in the preferences. Biarkan paha depan - + Use triangulation options set in the DAE options page Gunakan opsi triangulasi ditetapkan di halaman pilihan DAE - + Use DAE triangulation options Gunakan opsi triangulasi DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Bentuk melengkung yang tidak dapat diwakili sebagai kurva di IFC didekomposisi menjadi segi datar. Jika ini dicek, beberapa perhitungan tambahan dilakukan untuk bergabung dengan aspek coplanar. - + Join coplanar facets when triangulating Bergabunglah dengan aspek coplanar saat melakukan triangulasi @@ -4978,12 +5105,12 @@ You can change that in the preferences. Impor Ifc Properties di spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Saat mengekspor objek tanpa UID, UID yang dihasilkan akan disimpan di dalam objek FreeCAD untuk digunakan kembali pada saat objek tersebut diekspor, yang memberikan perbedaan yang lebih kecil di antara versi - + Store IFC universal ID in FreeCAD objects Simpan ID universal IFC di objek FreeCAD @@ -5053,17 +5180,17 @@ You can change that in the preferences. Split dinding multilayer - + Warning, experimental feature! Peringatan, fitur eksperimental! - + Use IfcOpenShell serializer if available Gunakan serializer IfcOpenShell jika tersedia - + Export 2D objects as IfcAnnotations Ekspor objek 2D sebagai IfcAnnotations @@ -5088,12 +5215,12 @@ You can change that in the preferences. Sesuaikan tampilan saat mengimpor - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Jika ini dicek, semua properti objek FreeCAD akan disimpan di dalam objek yang diekspor, yang memungkinkan untuk menciptakan model parametrik penuh pada reimport. - + Export full FreeCAD parametric model Ekspor model paramater penuh FreeCAD @@ -5148,22 +5275,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5228,14 +5355,49 @@ You can change that in the preferences. Line warna - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm index 70f3f29067..c868ef085f 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index 138f28942a..3f3ea0d108 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -44,12 +44,12 @@ Oggetto di cui questo componente è il clone - + Other shapes that are appended to this object Altre forme che vengono aggiunte a questo oggetto - + Other shapes that are subtracted from this object Altre forme che sono sottratte da questo oggetto @@ -79,7 +79,7 @@ L'area di tutte le facce verticali di questo oggetto - + The area of the projection of this object onto the XY plane L'area della proiezione di questo oggetto sul piano XY @@ -114,7 +114,7 @@ La superficie del piano calcolata per questo piano - + The placement of this object Il posizionamento di questo oggetto @@ -136,7 +136,7 @@ Crossing point of the path on the profile. - Punto di attraversamento del percorso sul profilo. + Punto di passaggio del tracciato sul profilo. @@ -144,12 +144,12 @@ La rotazione del profilo attorno al suo asse di estrusione - + The length of this element, if not based on a profile La lunghezza di questo elemento, se non è basato su un profilo - + The width of this element, if not based on a profile La larghezza di questo elemento, se non è basato su un profilo @@ -194,22 +194,22 @@ L'area di questo pannello - + The facemaker type to use to build the profile of this object Il tipo di Crea facce da utilizzare per creare il profilo di questo oggetto - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale in automatico) - + The linked object L'oggetto collegato - + The line width of the rendered objects La larghezza della linea degli oggetti resi @@ -349,7 +349,7 @@ L'altezza di questo elemento - + The structural nodes of this element I nodi strutturali di questo elemento @@ -614,132 +614,132 @@ Il foglio di calcolo dove stampare i risultati - + If false, non-solids will be cut too, with possible wrong results. Se false, verranno tagliati anche i non solidi, con possibili risultati sbagliati. - + The display length of this section plane La lunghezza di visualizzazione di questo piano di sezione - + The display height of this section plane La larghezza di visualizzazione di questo piano di sezione - + The size of the arrows of this section plane La dimensione delle frecce di questo piano di sezione - + Show the cut in the 3D view Visualizza la sezione nella vista 3D - + The rendering mode to use La modalità di rendering da utilizzare - + If cut geometry is shown or not Se la geometria di taglio è visualizzata o meno - + If cut geometry is filled or not Se la geometria deve essere riempita o non - + The size of the texts inside this object La dimensione dei testi all'interno di questo oggetto - + If checked, source objects are displayed regardless of being visible in the 3D model Se selezionata, gli oggetti di origine vengono visualizzati indipendentemente dall'essere visibili nel modello 3D - + The base terrain of this site Il terreno di base di questo sito - + The postal or zip code of this site Il codice postale di questo sito - + The city of this site La città di questo sito - + The country of this site Il paese di questo sito - + The latitude of this site La latitudine di questo sito - + Angle between the true North and the North direction in this document Angolo tra il Nord vero e la direzione nord in questo documento - + The elevation of level 0 of this site L'elevazione del livello 0 di questo sito - + The perimeter length of this terrain La lunghezza del perimetro di questo terreno - + The volume of earth to be added to this terrain Il volume di terra da aggiungere a questo terreno - + The volume of earth to be removed from this terrain Il volume di terra che deve essere rimosso da questo terreno - + An extrusion vector to use when performing boolean operations Un vettore di estrusione da utilizzare quando si eseguono le operazioni booleane - + Remove splitters from the resulting shape Eliminare dalla geometria le parti sezionate - + Show solar diagram or not Visualizza o nasconde il diagramma solare - + The scale of the solar diagram La scala del diagramma solare - + The position of the solar diagram La posizione del diagramma solare - + The color of the solar diagram Il colore del diagramma solare @@ -785,81 +785,76 @@ - A zone this space is part of - Una zona di cui fà parte questo spazio - - - The number of people who typically occupy this space Il numero di persone che in genere occupano questo spazio - + The electric power needed to light this space in Watts L'energia in watt necessaria per illuminare questo spazio - + The electric power needed by the equipment of this space in Watts La potenza in watt necessaria per gli apparecchi di questo spazio - + If True, Equipment Power will be automatically filled by the equipment included in this space Se true, la Potenza Apparecchi viene compilata automaticamente con le apparecchiature contenute in questo spazio - + The type of air conditioning of this space Il tipo di aria condizionata di questo spazio - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Testo da mostrare. Per inserire i rispettivi dati utilizzare $area, $label, $tag, $floor, $walls, $ceiling - + The name of the font Il nome del font - + The color of the area text Colore del testo per la zona - + The size of the text font La dimensione del font di testo - + The size of the first line of text La dimensione della prima riga di testo - + The space between the lines of text Lo spazio tra le righe di testo - + The position of the text. Leave (0,0,0) for automatic position La posizione del testo che descrive questo spazio. Lasciare (0, 0,0) per posizionarlo automaticamente - + The justification of the text La giustificazione del testo - + The number of decimals to use for calculated texts Il numero di decimali da utilizzare per i testi calcolati - + Show the unit suffix Visualizza il suffisso dell'unità @@ -939,102 +934,102 @@ La distanza tra il bordo degli scalini e la struttura o i montanti - + An optional extrusion path for this element - Un percorso di estrusione opzionale per questo elemento + Un tracciato di estrusione opzionale per questo elemento - + The height or extrusion depth of this element. Keep 0 for automatic L'altezza o la profondità di estrusione di questo elemento. Lasciare 0 per automatico - + A description of the standard profile this element is based upon Una descrizione del profilo standard su cui è basato questo elemento - + Offset distance between the centerline and the nodes line Distanza di offset tra la linea centrale e la linea dei nodi - + If the nodes are visible or not Se i nodi sono visibili o no - + The width of the nodes line La larghezza della linea dei nodi - + The size of the node points La dimensione dei punti nodo - + The color of the nodes line Il colore della linea dei nodi - + The type of structural node Il tipo di nodo strutturale - + Axes systems this structure is built on Sistemi di assi su cui è costruita questa struttura - + The element numbers to exclude when this structure is based on axes Il numero d'ordine degli elementi da escludere quando questa struttura è basata su assi - + If true the element are aligned with axes Se true gli elementi sono allineati con gli assi - + The length of this wall. Not used if this wall is based on an underlying object La lunghezza di questa parete. Non usato se questa parete è basata su un oggetto sottostante - + The width of this wall. Not used if this wall is based on a face La larghezza di questa parete. Non è usata se questa parete è basata su una faccia - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid L'altezza di questa parete. Lasciare 0 per automatico. Non usata se questa parete è basata su un solido - + The alignment of this wall on its base object, if applicable L'allineamento di questa parete sul suo oggetto di base, se applicabile - + The face number of the base object used to build this wall Il numero di faccia dell'oggetto base utilizzato per costruire questo muro - + The offset between this wall and its baseline (only for left and right alignments) L'offset tra questa parete e la sua linea guida (solo per gli allineamenti destro e sinistro) - + The normal direction of this window Direzione normale di questa finestra - + The area of this window L'area di questa finestra @@ -1049,7 +1044,7 @@ Un opzionale posizionamento supplementare da aggiungere al profilo prima di estruderlo - + Opens the subcomponents that have a hinge defined Apre i componenti con una cerniera definita @@ -1089,12 +1084,12 @@ L'elenco degli spessori degli strati - + The line color of the projected objects Il colore della linea degli oggetti proiettati - + The color of the cut faces (if turned on) Il colore delle facce tagliate (se attivato) @@ -1104,7 +1099,7 @@ Il sormonto delle traverse sopra il sotto dei gradini - + The number of the wire that defines the hole. A value of 0 means automatic Il numero del profilo che definisce il foro. Il valore 0 indica automatico @@ -1194,7 +1189,7 @@ La spaziatura personalizzata dell'armatura - + Shape of rebar Forma dell'armatura @@ -1204,17 +1199,17 @@ Inverte la direzione del tetto se è nel verso sbagliato - + Shows plan opening symbols if available Mostra i simboli di apertura dell'impianto se possibile - + Show elevation opening symbols if available Visualizza i simboli di elevazione dall'inizio del piano, se disponibili - + The objects that host this window Gli oggetti che ospitano questa finestra @@ -1269,12 +1264,12 @@ Il livello del punto (0, 0,0) di questo livello - + The shape of this object La forma di questo oggetto - + The line width of this object Lo spessore della linea di questo oggetto @@ -1414,47 +1409,47 @@ Se true, i colori dal file collegato verranno mantenuti aggiornati - + The objects that must be considered by this section plane. Empty means the whole document. Gli oggetti che devono essere considerati da questo piano di sezione. Vuoto significa tutto il documento. - + The transparency of this object La trasparenza di questo oggetto - + The color of this object Il colore di questo oggetto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distanza tra il piano di taglio e la vista di taglio attuale (tenere questo un valore molto piccolo ma non zero) - + The street and house number of this site, with postal box or apartment number if needed La via e il numero civico di questo sito, con il codice postale o il numero dell'appartamento se necessario - + The region, province or county of this site La regione, la provincia o il paese di questo sito - + A url that shows this site in a mapping website Un indirizzo Internet che indica questo sito geografico in un sito web di mappatura - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Un offset facoltativo tra l'origine del modello (0, 0,0) e il punto indicato dalle coordinate geografiche - + Specifies if this space is internal or external Specifica se questo spazio è interno o esterno @@ -1504,200 +1499,230 @@ Il "contorno sinistro" di tutti i segmenti delle scale - + Enable this to make the wall generate blocks Abilitare questo per far sì che il muro generi i blocchi - + The length of each block La lunghezza di ciascun blocco - + The height of each block L'altezza di ogni blocco - + The horizontal offset of the first line of blocks L'offset orizzontale della prima linea di blocchi - + The horizontal offset of the second line of blocks L'offset orizzontale della seconda linea di blocchi - + The size of the joints between each block Le dimensioni dei giunti tra ogni blocco - + The number of entire blocks Il numero di blocchi interi - + The number of broken blocks Il numero di blocchi rovinati - + The components of this window I componenti di questa finestra - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. La profondità del foro che questa finestra crea nel suo oggetto ospitante. Se è 0, il valore viene calcolato automaticamente. - + An optional object that defines a volume to be subtracted from hosts of this window Un oggetto opzionale che definisce un volume da sottrarre per ospitare questa finestra - + The width of this window La larghezza della finestra - + The height of this window L'altezza di questa finestra - + The preset number this window is based on Il numero di preselezione su cui si basa questa finestra - + The frame size of this window Le dimensioni del telaio della finestra - + The offset size of this window La dimensione dell'offset di questa finestra - + The width of louvre elements La larghezza delle lamelle - + The space between louvre elements Lo spazio tra le lamelle - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Il numero del profilo che definisce il foro. Se è 0, il valore viene calcolato automaticamente Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Specificare se lo spostamento di questo oggetto sposta anche la sua base A single section of the fence - A single section of the fence + Una singola sezione della recinzione A single fence post - A single fence post + Un singolo piantone della recinzione The Path the fence should follow - The Path the fence should follow + Il percorso che la recinzione deve seguire The number of sections the fence is built of - The number of sections the fence is built of + Il numero di sezioni di cui è costituita la recinzione The number of posts used to build the fence - The number of posts used to build the fence + Il numero di piantoni usati per costruire la recinzione - + The type of this object - The type of this object + La forma di questo oggetto IFC data - IFC data + Dati IFC IFC properties of this object - IFC properties of this object + Proprietà IFC di questo oggetto - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + La descrizione degli attributi IFC non è ancora implementata + + + + If True, resulting views will be clipped to the section plane area. + Se vero, le visualizzazioni risultanti verranno ritagliate nell'area di piano della sezione. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Se vero, il colore del materiale degli oggetti verrà utilizzato per riempire le aree tagliate. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Quando impostato su 'Vero Nord' l'intera geometria sarà ruotata per coincidere con il vero nord di questo sito - + + Show compass or not + Mostra la bussola o no + + + + The rotation of the Compass relative to the Site + La rotazione della bussola relativa al sito + + + + The position of the Compass relative to the Site placement + La posizione della bussola relativa al posizionamento del sito + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Aggiorna il valore del Declinazione in base alla rotazione della bussola The thickness of the risers - The thickness of the risers + Lo spessore delle alzate The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + Il "giusto contorno" di tutti i segmenti delle scale + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Componenti @@ -1717,12 +1742,12 @@ Crea Asse - + Remove Rimuovi - + Add Aggiungi @@ -1832,87 +1857,87 @@ Vista di - + Create Section Plane Crea Piano di Sezione - + Create Site Crea Sito - + Create Structure Crea Struttura - + Create Wall Crea Parete - + Width Larghezza - + Height Altezza - + Error: Invalid base object Errore: Oggetto di base non valido - + This mesh is an invalid solid Questa mesh non è un solido valido - + Create Window Crea Finestra - + Edit Modifica - + Create/update component Crea o aggiorna componente - + Base 2D object Oggetto 2D di base - + Wires Polilinea - + Create new component Crea nuovo componente - + Name Nome - + Type Tipo - + Thickness Spessore @@ -1922,7 +1947,7 @@ Errore: impossibile determinare la codifica dei caratteri - + file %s successfully created. file %s creato con successo. @@ -1972,32 +1997,32 @@ Crea scale - + Length Lunghezza - + Error: The base shape couldn't be extruded along this tool object Errore: La forma base non può essere estrusa lungo questo oggetto strumento - + Couldn't compute a shape Non è possibile computare una forma - + Merge Wall Unisci pareti - + Please select only wall objects Seleziona solo gli oggetti parete - + Merge Walls Unisci pareti @@ -2012,7 +2037,7 @@ Errore di calcolo della forma di questo oggetto - + Create Structural System Crea sistema strutturale @@ -2172,7 +2197,7 @@ Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profi Altezza (mm) - + Create Component Crea componente @@ -2187,17 +2212,17 @@ Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profi Le pareti possono essere basate solo su oggetti Parte o Mesh - + Set text position Posizione del testo - + Category Categoria - + Key Chiave @@ -2207,12 +2232,12 @@ Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profi Valore - + Unit Unità - + Create IFC properties spreadsheet Crea un foglio di calcolo di proprietà IFC @@ -2242,7 +2267,7 @@ Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profi Crea un foglio di pannello - + Facemaker returned an error FaceMaker ha restituito un errore @@ -2267,137 +2292,137 @@ Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profi Crea un raccordo - + Precast elements Elementi predefiniti - + Slab type Tipo di lastra - + Chamfer Smusso - + Dent length Lunghezza mensola - + Dent width Larghezza mensola - + Dent height Altezza mensola - + Slab base Base lastra - + Number of holes Numero di fori - + Major diameter of holes Diametro maggiore dei fori - + Minor diameter of holes Diametro minore dei fori - + Spacing between holes Spazio tra i fori - + Number of grooves Numero di scanalature - + Depth of grooves Profondità delle scanalature - + Height of grooves Altezza delle scanalature - + Spacing between grooves Spazio tra le scanalature - + Number of risers Numero di alzate - + Length of down floor Lunghezza del pianerottolo - + Height of risers Altezza delle alzate - + Depth of treads Profondità delle pedate - + Precast options Opzioni dei prefabbricati - + Dents list Elenco delle mensole - + Add dent Aggiungi mensola - + Remove dent Rimuovi mensola - + Slant Rastrematura - + Level Livello - + Rotation Rotazione - + Offset Offset @@ -2422,58 +2447,58 @@ Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profi Scheda - + There is no valid object in the selection. Site creation aborted. Nella selezione non esiste alcun oggetto valido. Creazione del sito interrotta. - + Node Tools Strumenti di nodo - + Reset nodes Reimposta i nodi - + Edit nodes Modifica i nodi - + Extend nodes Estendi i nodi - + Extends the nodes of this element to reach the nodes of another element Estende i nodi di questo elemento per raggiungere i nodi di un altro elemento - + Connect nodes Collega i nodi - + Connects nodes of this element with the nodes of another element Collega i nodi di questo elemento con i nodi di un altro elemento - + Toggle all nodes Attiva o disattiva tutti i nodi - + Toggles all structural nodes of the document on/off Attiva o disattiva tutti i nodi strutturali del documento - + Intersection found. Intersezione trovata. @@ -2485,22 +2510,22 @@ Site creation aborted. Porta - + Hinge Cerniera - + Opening mode Modalità di apertura - + Get selected edge Ottenere il bordo selezionato - + Press to retrieve the selected edge Premere per recuperare il bordo selezionato @@ -2530,17 +2555,17 @@ Site creation aborted. Nuovo strato - + Wall Presets... Preset di pareti... - + Hole wire Contorno del foro - + Pick selected Usa selezionata @@ -2625,17 +2650,17 @@ Site creation aborted. Questo oggetto non ha facce - + Space boundaries Confini dello spazio - + Error: Unable to modify the base object of this wall Errore: impossibile modificare l'oggetto base di questo muro - + Window elements Elementi della finestra @@ -2746,7 +2771,7 @@ Building creation aborted. Tutto bene! Nessun problema riscontrato - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'oggetto non possiede attributi IfcProperties. Annullare la creazione del foglio di calcolo per l'oggetto: @@ -2811,10 +2836,10 @@ Building creation aborted. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Dentro un oggetto Piano è possibile inserire qualsiasi cosa tranne: un oggetto Sito, Edificio o Piano. +Gli oggetti Piano non possono accettare degli oggetti Sito, Edificio o Piano. +Gli oggetti Sito, Edificio o Piano saranno rimossi dalla selezione. +È possibile modificare questa impostazione nelle preferenze. @@ -2845,7 +2870,7 @@ Floor creation aborted. Unable to build the base path - Impossibile generare il percorso di base + Impossibile generare il tracciato di base @@ -2928,47 +2953,47 @@ Floor creation aborted. Nessun foglio di calcolo è associato a questa scheda - + Section plane settings Impostazioni del piano di sezione - + Objects seen by this section plane: Oggetti visti in questo piano di sezione: - + Section plane placement: Posizione del piano di sezione: - + Rotate X Rotazione X - + Rotate Y Rotazione Y - + Rotate Z Rotazione Z - + Resize Ridimensiona - + Center Centro - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2976,77 +3001,77 @@ Note: You can change that in the preferences. Selezionare solo degli oggetti Edificio o niente del tutto!. Sito non accetta altri oggetti diversi da Edificio. Gli altri oggetti saranno rimossi dalla selezione. Si può cambiare questa impostazione nelle preferenze. - + Choose another Structure object: Scegliere un altro oggetto struttura: - + The chosen object is not a Structure L'oggetto selezionato non è una struttura - + The chosen object has no structural nodes L'oggetto scelto non ha nodi strutturali - + One of these objects has more than 2 nodes Uno di questi oggetti possiede più di 2 nodi - + Unable to find a suitable intersection point Impossibile trovare un punto di intersezione adatto - + Intersection found. Intersezione trovata. - + The selected wall contains no subwall to merge La parete selezionata non contiene nessuna sotto-parete da unire - + Cannot compute blocks for wall Non è possibile calcolare i blocchi per il muro - + Choose a face on an existing object or select a preset Scegliere una faccia su un oggetto esistente o selezionare un preimpostato - + Unable to create component Impossibile creare il componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Il numero del contorno che definisce un foro nell'oggetto ospite. Il valore zero adotta automaticamente il contorno più grande - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here Se è selezionato, il valore Frame predefinito di questa finestra viene aggiunto al valore inserito qui - + If this is checked, the default Offset value of this window will be added to the value entered here Se è selezionato, il valore Offset predefinito di questa finestra viene aggiunto al valore inserito qui - + pycollada not found, collada support is disabled. pycollada non trovato, il supporto a collada è disabilitato. @@ -3086,7 +3111,7 @@ Note: You can change that in the preferences. Errore: la versione IfcOpenShell è troppo vecchia - + Successfully written Scritto correttamente @@ -3096,7 +3121,7 @@ Note: You can change that in the preferences. Trovata una forma contenente curve, sarà triangolata - + Successfully imported Importazione riuscita @@ -3106,50 +3131,165 @@ Note: You can change that in the preferences. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Dentro un oggetto Edificio è possibile inserire qualsiasi cosa tranne: un oggetto Sito o Edificio. +Gli oggetti Edificio non possono accettare degli oggetti Sito o Edificio. +Gli oggetti Sito e Edificio saranno rimossi dalla selezione. +È possibile modificare questa impostazione nelle preferenze. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Rimuovi gli oggetti evidenziati dalla lista precedente - + Add selected Aggiungi la selezione - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Aggiungi oggetto(i) selezionato(i) allo spazio di questo piano sezione + + + + Rotates the plane along the X axis + Ruota il piano lungo l'asse X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Ruota il piano lungo l'asse Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Ruota il piano lungo l'asse Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Ridimensiona il piano per adattare gli oggetti nella lista precedente - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Centra il piano sugli oggetti nella lista precedente - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Primo punto della trave + + + + Base point of column + Punto di base della colonna + + + + Next point + Punto successivo + + + + Structure options + Opzioni struttura + + + + Drawing mode + Modalità di disegno + + + + Beam + Trave + + + + Column + Colonna + + + + Preset + Preimpostato + + + + Switch L/H + Scambia L/H + + + + Switch L/W + Scambia L/W + + + + Con&tinue + Con&tinua + + + + First point of wall + Primo punto del muro + + + + Wall options + Opzioni di Muro + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Questa lista mostra tutti gli oggetti MultiMateriale di questo documento. Creane alcuni per definire i tipi di parete. + + + + Alignment + Allineamento + + + + Left + Da sinistra + + + + Right + Da destra + + + + Use sketches + Utilizzare degli schizzi + + + + Structure + Struttura + + + + Window + Finestra + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3363,21 +3503,16 @@ You can change that in the preferences. Checks the selected objects for problems Controlla se gli oggetti selezionati hanno dei problemi - - - Explore the contents of an IFC file - Esplora il contenuto di un file Ifc - Arch_CloneComponent - + Clone component Clona componente - + Clones an object as an undefined architectural component Duplica un oggetto come un componente architettonico indefinito @@ -3398,12 +3533,12 @@ You can change that in the preferences. Arch_Component - + Component Componente - + Creates an undefined architectural component Crea un componente architettonico non definito @@ -3437,14 +3572,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Recinzione - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Crea un oggetto recinzione da una sezione, un piantone e un percorso selezionati @@ -3536,23 +3671,15 @@ You can change that in the preferences. Gli indici delle facce da nascondere - - Arch_IfcExplorer - - - Ifc Explorer - Explorer ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea un foglio di calcolo IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea un foglio di calcolo per archiviare le proprietà ifc di un oggetto. @@ -3581,12 +3708,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Unisci pareti - + Merges the selected walls, if possible Unisce le pareti selezionate, se possibile @@ -3792,12 +3919,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Piano di sezione - + Creates a section plane object, including the selected objects Crea un oggetto piano di sezione che comprende gli oggetti selezionati @@ -3818,12 +3945,12 @@ You can change that in the preferences. Arch_Site - + Site Sito - + Creates a site object including selected objects. Crea un oggetto sito che contiene gli oggetti selezionati. @@ -3870,12 +3997,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struttura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea un oggetto struttura da zero o da un oggetto selezionato (schizzo, wire, faccia o solido) @@ -3883,12 +4010,12 @@ You can change that in the preferences. Arch_Survey - + Survey Ispeziona - + Starts survey Avvia ispezione @@ -3896,12 +4023,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Attiva/Disattiva IFC Brep - + Force an object to be exported as Brep or not Forza, o non, l'esportazione di un oggetto come Brep @@ -3909,12 +4036,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Attiva o disattiva i sottocomponenti - + Shows or hides the subcomponents of this object Mostra o nasconde i sottocomponenti di questo oggetto @@ -3935,12 +4062,12 @@ You can change that in the preferences. Arch_Window - + Window Finestra - + Creates a window object from a selected object (wire, rectangle or sketch) Crea un oggetto finestra da un oggetto selezionato (wire, rettangolo o sketch) @@ -4211,7 +4338,7 @@ You can change that in the preferences. Draft - + Writing camera position Scrivere la posizione della camera @@ -4647,7 +4774,7 @@ You can change that in the preferences. Trasparenza: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Ad alcuni visualizzatori IFC non piacciono gli oggetti esportati come estrusioni. Usatelo per forzare l'esportazione di tutti gli oggetti come geometrieaBREP. @@ -4687,7 +4814,7 @@ You can change that in the preferences. Spessore - + Force export as Brep Forza l'esportazione come Brep @@ -4717,7 +4844,7 @@ You can change that in the preferences. DAE - + Export options Opzioni di esportazione @@ -4927,22 +5054,22 @@ You can change that in the preferences. Consenti i quadrilateri - + Use triangulation options set in the DAE options page Utilizza le opzioni di triangolazione impostate nella pagina delle opzioni di DAE - + Use DAE triangulation options Utilizza le opzioni di triangolazione DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Le forme curve che non possono essere rappresentate come curve in IFC sono scomposte in sfaccettature piatte. Selezionando questa opzione, saranno eseguiti alcuni ulteriori calcoli per unire le sfaccettature complanari. - + Join coplanar facets when triangulating Unisci le facce complanari durante la triangolazione @@ -4982,12 +5109,12 @@ You can change that in the preferences. Importa le proprietà Ifc in un foglio di calcolo - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Quando si esportano oggetti senza UID, l'UID generato verrà memorizzato all'interno dell'oggetto FreeCAD per essere riutilizzo la prossima volta che l'oggetto viene esportato, il che produce minori differenze tra le versioni - + Store IFC universal ID in FreeCAD objects Archivia un ID IFC universale negli oggetti di FreeCAD @@ -5057,17 +5184,17 @@ You can change that in the preferences. Dividi le pareti multistrati - + Warning, experimental feature! Attenzione, funzione sperimentale! - + Use IfcOpenShell serializer if available Se è disponibile, utilizza il serializzatore IfcOpenShell - + Export 2D objects as IfcAnnotations Esporta gli oggetti 2D come IfcAnnotations @@ -5092,12 +5219,12 @@ You can change that in the preferences. Adatta la vista durante l'importazione - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Selezionando questa opzione, tutte le proprietà dell'oggetto FreeCAD vengono conservate all'interno gli oggetti esportati, permettendo di ricreare un modello completamente parametrico quando viene reimportato. - + Export full FreeCAD parametric model Esporta il modello parametrico completo di FreeCAD @@ -5152,59 +5279,59 @@ You can change that in the preferences. Lista delle esclusioni: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Se questa casella è selezionata e, ove possibile, le entità simili vsono utilizzate una volta nel file. Ciò riduce notevolmente le dimensioni del file, ma lo rende meno leggibile dalle persone - + Reuse similar entities Riutilizza le entità simili - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Quando possibile, gli oggetti IFC che sono rettangoli estrusi vengono esportati come IfcRectangleProfileDef. Tuttavia, alcune altre applicazioni hanno notoriamente problemi nell'importazione di tale entità. In questo caso si può disabilitare da qui (tutti i profili saranno esportati come IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disabilita IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Imposta la proprietà "Sposta base" su vero, per impostazione predefinita IFC version - IFC version + Versione IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + La versione IFC cambierà in base agli attributi e prodotti supportati IFC4 - IFC4 + IFCC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Ambienti Line style: - Line style: + Stile linea: @@ -5214,17 +5341,17 @@ You can change that in the preferences. Dashed - Dashed + Tratteggiato Dotted - Dotted + Puntinato Dashdot - Dashdot + Tratteggio puntinato @@ -5232,14 +5359,49 @@ You can change that in the preferences. Colore della linea - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Alcuni tipi IFC come IfcWall o IfcBeam hanno versioni standard speciali come IfcWallStandardCase o IfcBeamStandardCase. Se questa opzione è attivata, FreeCAD esporterà automaticamente oggetti come processi standard, qualora le condizioni necessarie siano soddisfatte. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.qm b/src/Mod/Arch/Resources/translations/Arch_ja.qm index aef63f91d3..3e1dd632b1 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ja.qm and b/src/Mod/Arch/Resources/translations/Arch_ja.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index 0e3c63b659..255ee0ba97 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -44,12 +44,12 @@ このコンポーネントからクローンされたオブジェクト - + Other shapes that are appended to this object このオブジェクトに追加される他のシェイプ - + Other shapes that are subtracted from this object このオブジェクトから減算される他のシェイプ @@ -79,7 +79,7 @@ このオブジェクトのすべての垂直面の面積 - + The area of the projection of this object onto the XY plane このオブジェクトのXY平面上への投影の面積 @@ -114,7 +114,7 @@ このフロアの床面積の計算 - + The placement of this object このオブジェクトの配置 @@ -144,12 +144,12 @@ プロファイルの押し出し軸周りの回転 - + The length of this element, if not based on a profile プロファイルに基づいていない場合、この要素の長さ - + The width of this element, if not based on a profile プロファイルに基づいていない場合、この要素の幅 @@ -194,22 +194,22 @@ このパネルの面積 - + The facemaker type to use to build the profile of this object このオブジェクトのプロファイル構築で使用するフェイスメーカーの種類 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) このオブジェクトの法線押し出し方向（法線自動設定を行う場合は（0,0,0）のままにしてください） - + The linked object リンクされたオブジェクト - + The line width of the rendered objects 描画オブジェクトの線の幅 @@ -349,7 +349,7 @@ この要素の高さ - + The structural nodes of this element この要素の構造ノード @@ -614,132 +614,132 @@ 結果出力先のスプレッドシート - + If false, non-solids will be cut too, with possible wrong results. False の場合、非ソリッドも切断され、不正な結果となる可能性があります。 - + The display length of this section plane この断面平面の表示長さ - + The display height of this section plane この断面平面の表示高さ - + The size of the arrows of this section plane この断面平面の矢印のサイズ - + Show the cut in the 3D view 3Dビューでカットを表示 - + The rendering mode to use 使用するレンダリングモード - + If cut geometry is shown or not カット・ジオメトリーを表示するかどうか - + If cut geometry is filled or not カット・ジオメトリーを塗りつぶすかどうか - + The size of the texts inside this object このオブジェクト内部のテキストの幅 - + If checked, source objects are displayed regardless of being visible in the 3D model チェックされている場合、ソースオブジェクトが3Dモデル内で表示されているかどうかに関わらず表示されます。 - + The base terrain of this site このサイトの基礎地形 - + The postal or zip code of this site このサイトの郵便番号 - + The city of this site このサイトのある都市 - + The country of this site このサイトのある国 - + The latitude of this site このサイトの緯度 - + Angle between the true North and the North direction in this document このドキュメントでの真北と北方向の間の角度 - + The elevation of level 0 of this site このサイトの標高 - + The perimeter length of this terrain この地形の外周長さ - + The volume of earth to be added to this terrain この地形に追加する土の量 - + The volume of earth to be removed from this terrain この地形から取り除く土の量 - + An extrusion vector to use when performing boolean operations ブーリアン演算を実行するときに使用する押し出しベクトル - + Remove splitters from the resulting shape 結果シェイプからスプリッターを削除 - + Show solar diagram or not 天空図の表示・非表示 - + The scale of the solar diagram 天空図のスケール - + The position of the solar diagram 天空図の位置 - + The color of the solar diagram 天空図の色 @@ -785,81 +785,76 @@ - A zone this space is part of - このゾーンの空間は以下の一部です： - - - The number of people who typically occupy this space 通常このスペースを占有する人間の数 - + The electric power needed to light this space in Watts このスペースの照明に必要となる電力ワット数 - + The electric power needed by the equipment of this space in Watts このスペースの設備に必要となる電力ワット数 - + If True, Equipment Power will be automatically filled by the equipment included in this space Trueの場合、設備電力はこのスペースに含まれる設備から自動的に設定されます。 - + The type of air conditioning of this space このスペースの空調設備の種類 - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data 表示されるテキスト。$area、$label、$tag、$floor、$walls、$ceilingを使用して各データを挿入してください。 - + The name of the font フォントの名前 - + The color of the area text エリアの文字色 - + The size of the text font テキストフォントのサイズ - + The size of the first line of text テキストの最初の行のサイズ - + The space between the lines of text テキストの行間隔 - + The position of the text. Leave (0,0,0) for automatic position テキスト位置。自動配置の場合は (0,0,0) としてください。 - + The justification of the text テキストの両端揃え - + The number of decimals to use for calculated texts 計算結果テキストで使用する小数点以下桁数 - + Show the unit suffix 単位表記を表示 @@ -939,102 +934,102 @@ 階段境界線と構造の間のオフセット - + An optional extrusion path for this element この要素のオプション押し出し経路 - + The height or extrusion depth of this element. Keep 0 for automatic この要素の高さまたは押し出し深さ。自動設定する場合は0のままにしてください。 - + A description of the standard profile this element is based upon この要素の基となる標準プロファイルの説明 - + Offset distance between the centerline and the nodes line 中心線と節点ラインの間のオフセット距離 - + If the nodes are visible or not 節点を表示するかどうか - + The width of the nodes line 節点ラインの幅 - + The size of the node points 節点のサイズ - + The color of the nodes line 節点ラインの色 - + The type of structural node 構造ノードの種類 - + Axes systems this structure is built on この構造体の座標系 - + The element numbers to exclude when this structure is based on axes 軸に基づいてこの構造体を押し出す場合に押し出す要素の数 - + If true the element are aligned with axes Trueの場合、要素を軸方向に整列 - + The length of this wall. Not used if this wall is based on an underlying object 壁の長さ。壁が基礎となるオブジェクトに基づいている場合には使用されません。 - + The width of this wall. Not used if this wall is based on a face この壁の幅。この壁が面に基づく場合は使用されません。 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid この壁の高さ。自動設定する場合は0のままにしてください。この壁がソリッドに基づく場合は使用されません - + The alignment of this wall on its base object, if applicable 適用可能な場合、この壁のベースオブジェクトに対する位置 - + The face number of the base object used to build this wall この壁の作成に使用されているベースオブジェクトの面の数 - + The offset between this wall and its baseline (only for left and right alignments) この壁とそのベースラインとの間のオフセット(左揃え、右揃えの時のみ) - + The normal direction of this window このウィンドウの法線方向 - + The area of this window この窓の面積 @@ -1049,7 +1044,7 @@ 押し出す前にプロファイルに追加するオプションの追加配置 - + Opens the subcomponents that have a hinge defined ヒンジが定義されているサブコンポーネントを開く @@ -1089,12 +1084,12 @@ レイヤー厚みのリスト - + The line color of the projected objects 投影オブジェクトの線の色 - + The color of the cut faces (if turned on) カット面の色（有効な場合） @@ -1104,7 +1099,7 @@ 踏み板の底部上の側桁の重なり - + The number of the wire that defines the hole. A value of 0 means automatic 穴を定義するワイヤーの数。値0の場合は自動になります。 @@ -1194,7 +1189,7 @@ 鉄筋のユーザー設定間隔 - + Shape of rebar 鉄筋の形状 @@ -1204,17 +1199,17 @@ 間違った方向の場合、屋根の方向を反転 - + Shows plan opening symbols if available 利用可能な場合、平面図オープンのシンボルを表示 - + Show elevation opening symbols if available 利用可能な場合、立面図オープンのシンボルを表示 - + The objects that host this window この窓を持つオブジェクト @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object このオブジェクトの形 - + The line width of this object オブジェクトの線幅 @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object オブジェクトの透過度 - + The color of this object このオブジェクトの色 - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) 切断面と実際のビュー切断面の間の距離（ゼロでない非常に小さな値を設定してください） - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website 地図ウェブサイトでこのサイトを表示するためのURL - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates モデル原点 (0, 0, 0) と塵座標によって表される点との間のオプションオフセット距離 - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks 壁によってブロックを生成させる場合は有効化 - + The length of each block 各ブロックの長さ - + The height of each block 各ブロックの高さ - + The horizontal offset of the first line of blocks ブロックの最初の線の水平オフセット - + The horizontal offset of the second line of blocks ブロックの2番目の線の水平オフセット - + The size of the joints between each block 各ブロック間のジョイントのサイズ - + The number of entire blocks 全体のブロック数 - + The number of broken blocks 壊れたブロックの数 - + The components of this window このウィンドウのコンポーネント - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. このウィンドウがホストオブジェクト内で作る穴の深さ。 0の場合、値は自動的に計算されます。 - + An optional object that defines a volume to be subtracted from hosts of this window このウィンドウのホストから減算するボリュームを定義するオプションのオブジェクト - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on このウィンドウのプリセット番号 - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements ルーバー要素の幅 - + The space between louvre elements ルーバー要素の間隔 - + The number of the wire that defines the hole. If 0, the value will be calculated automatically 穴を定義するワイヤーの数。0の場合、この値は自動計算されます。 @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components コンポーネント @@ -1717,12 +1742,12 @@ 軸を作成 - + Remove 削除 - + Add 追加 @@ -1832,87 +1857,87 @@ 表示 - + Create Section Plane 断面平面を作成 - + Create Site サイトを作成 - + Create Structure 構造体を作成 - + Create Wall 壁を作成 - + Width 幅 - + Height 高さ - + Error: Invalid base object エラー： 無効なベースオブジェクト - + This mesh is an invalid solid このメッシュは無効なソリッドです - + Create Window 窓を作成 - + Edit 編集 - + Create/update component コンポーネントを作成/更新する - + Base 2D object ベース2Dオブジェクト - + Wires ワイヤー - + Create new component 新しいコンポーネントを作成 - + Name 名前 - + Type タイプ - + Thickness 厚み @@ -1922,7 +1947,7 @@ エラー: 文字エンコーディングが判別できませんでした - + file %s successfully created. ファイル %s が正常に作成されました。 @@ -1972,32 +1997,32 @@ 階段を作成 - + Length 長さ - + Error: The base shape couldn't be extruded along this tool object エラー: ベースシェイプをこのツールオブジェクトに沿って押し出すことはできません - + Couldn't compute a shape シェイプを計算できません - + Merge Wall 壁を統合 - + Please select only wall objects 壁オブジェクトのみを選択してください - + Merge Walls 壁を統合 @@ -2012,7 +2037,7 @@ このオブジェクトのシェイプ計算でエラーが発生しました。 - + Create Structural System 構造システムを作成 @@ -2173,7 +2198,7 @@ Run = 0 の場合、Height が相対プロファイルとおなじになるよ 高さ (mm) - + Create Component コンポーネントを作成 @@ -2188,17 +2213,17 @@ Run = 0 の場合、Height が相対プロファイルとおなじになるよ 壁はパートオブジェクトまたはメッシュオブジェクトのみをベースとして持つことができます - + Set text position テキスト位置を設定 - + Category カテゴリ - + Key キー名 @@ -2208,12 +2233,12 @@ Run = 0 の場合、Height が相対プロファイルとおなじになるよ 値 - + Unit 単位 - + Create IFC properties spreadsheet IFCプロパティー・スプレッドシートを作成 @@ -2243,7 +2268,7 @@ Run = 0 の場合、Height が相対プロファイルとおなじになるよ パネルシートを作成 - + Facemaker returned an error フェイスメーカーがエラーを返しました。 @@ -2268,137 +2293,137 @@ Run = 0 の場合、Height が相対プロファイルとおなじになるよ コネクターを作成 - + Precast elements プレキャスト要素 - + Slab type スラブの種類 - + Chamfer 面取り - + Dent length 凹みの長さ - + Dent width 凹みの幅 - + Dent height 凹みの高さ - + Slab base スラブ基礎 - + Number of holes 穴の数 - + Major diameter of holes 穴の大径 - + Minor diameter of holes 穴の小径 - + Spacing between holes 穴の間隔 - + Number of grooves 溝の数 - + Depth of grooves 溝の深さ - + Height of grooves 溝の高さ - + Spacing between grooves 溝の間隔 - + Number of risers 蹴上げの数 - + Length of down floor 床下の長さ - + Height of risers 蹴上げの高さ - + Depth of treads 踏み板の奥行き - + Precast options プレキャスト オプション - + Dents list 凹みリスト - + Add dent 凹みを追加 - + Remove dent 凹みを削除 - + Slant 傾斜 - + Level レベル - + Rotation 回転 - + Offset オフセット @@ -2423,59 +2448,59 @@ Run = 0 の場合、Height が相対プロファイルとおなじになるよ スケジュール - + There is no valid object in the selection. Site creation aborted. 選択対象に有効なオブジェクトがありません。 サイト作成は中止されます。 - + Node Tools ノードツール - + Reset nodes ノードをリセット - + Edit nodes ノードを編集 - + Extend nodes ノードを拡張 - + Extends the nodes of this element to reach the nodes of another element 他の要素のノードに到達する様にこの要素のノードを拡張します。 - + Connect nodes 節点を接続 - + Connects nodes of this element with the nodes of another element この要素の節点を別の要素の節点と接続 - + Toggle all nodes すべての節点を切り替え - + Toggles all structural nodes of the document on/off ドキュメントの全ての構造ノードのオン/オフを切り替え - + Intersection found. 交差が見つかりました。 @@ -2487,22 +2512,22 @@ Site creation aborted. ドア - + Hinge ヒンジ - + Opening mode オープニングモード - + Get selected edge 選択エッジを取得 - + Press to retrieve the selected edge 選択したエッジを取得するにはキーを押します @@ -2532,17 +2557,17 @@ Site creation aborted. 新規レイヤー - + Wall Presets... 壁のプリセット... - + Hole wire ホールワイヤー - + Pick selected ピック選択 @@ -2627,17 +2652,17 @@ Site creation aborted. このオブジェクトには面がありません - + Space boundaries スペース境界 - + Error: Unable to modify the base object of this wall エラー: この壁のベース オブジェクトを変更できません - + Window elements 窓要素 @@ -2749,7 +2774,7 @@ Building creation aborted. すべて良好！問題は見つかりませんでした - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: オブジェクトにIfcProperties属性がありません。このオブジェクトのためのスプレッドシート作成をキャンセルしてください： @@ -2932,47 +2957,47 @@ Floor creation aborted. このスケジュールにはスプレッドシートが添付されていません - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center 中心 - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2980,77 +3005,77 @@ Note: You can change that in the preferences. ビルディングオブジェクトを選択するか、何も選択しないでください！サイトはビルディング以外のオブジェクトを持つことができません。その他のオブジェクトは選択対象から除かれます。この動作はユーザー設定から変更できます。 - + Choose another Structure object: 別の構造体オブジェクトを選択: - + The chosen object is not a Structure 選択されたオブジェクトが構造体ではありません。 - + The chosen object has no structural nodes 選択されたオブジェクトは構造ノードを持ちません。 - + One of these objects has more than 2 nodes これらのオブジェクトのひとつが複数の節点を持っています。 - + Unable to find a suitable intersection point 適切な交差点を見つけることができません - + Intersection found. 交差が見つかりました。 - + The selected wall contains no subwall to merge 選択した壁は統合できる下位の壁を含んでいません - + Cannot compute blocks for wall 壁用のブロックを計算できません。 - + Choose a face on an existing object or select a preset 既存オブジェクトにある面を選択するか、プリセットを選択 - + Unable to create component コンポーネントを作成できません - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire ホストオブジェクトでの穴を定義するワイヤーの数。値0では自動的に最大のワイヤーとなります。 - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada が見つかりません。collada のサポートは無効です。 @@ -3090,7 +3115,7 @@ Note: You can change that in the preferences. エラー: IfcOpenShellバージョンが古すぎます。 - + Successfully written 書き込み成功 @@ -3100,7 +3125,7 @@ Note: You can change that in the preferences. 三角分割および曲線を含む図形が見つかりました - + Successfully imported インポート成功 @@ -3116,45 +3141,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected 選択追加 - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + 左面図 + + + + Right + 右面図 + + + + Use sketches + スケッチを使用 + + + + Structure + 構造体 + + + + Window + ウィンドウ + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3367,21 +3507,16 @@ You can change that in the preferences. Checks the selected objects for problems 選択されているオブジェクトの問題を確認します - - - Explore the contents of an IFC file - IFCファイルの内容を閲覧 - Arch_CloneComponent - + Clone component コンポーネントのクローン - + Clones an object as an undefined architectural component オブジェクトを未定義建築コンポーネントとしてクローン @@ -3402,12 +3537,12 @@ You can change that in the preferences. Arch_Component - + Component コンポーネント - + Creates an undefined architectural component 未定義建築コンポーネントを作成 @@ -3441,12 +3576,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3540,23 +3675,15 @@ You can change that in the preferences. 非表示にする面の番号 - - Arch_IfcExplorer - - - Ifc Explorer - IFCエクスプ ローラー - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFCスプレッドシートを作成... - + Creates a spreadsheet to store IFC properties of an object. オブジェクトのIFCプロパティーを保存するためのスプレッドシートを作成 @@ -3585,12 +3712,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls 壁を統合 - + Merges the selected walls, if possible 可能な場合、選択した壁を結合 @@ -3796,12 +3923,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 断面 - + Creates a section plane object, including the selected objects 選択されたオブジェクトを含む断面オブジェクトを作成します @@ -3822,12 +3949,12 @@ You can change that in the preferences. Arch_Site - + Site サイト - + Creates a site object including selected objects. 選択されているオブジェクトを含むサイトオブジェクトを作成します @@ -3874,12 +4001,12 @@ You can change that in the preferences. Arch_Structure - + Structure 構造体 - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) スクラッチまたは選択されているオブジェクト（スケッチ、ワイヤー、面、ソリッド）から構造体オブジェクトを作成します @@ -3887,12 +4014,12 @@ You can change that in the preferences. Arch_Survey - + Survey 調査 - + Starts survey 調査開始 @@ -3900,12 +4027,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep フラグの切り替え - + Force an object to be exported as Brep or not オブジェクトを強制的に Brep としてエクスポートするかどうか @@ -3913,12 +4040,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents サブコンポーネントを切り替え - + Shows or hides the subcomponents of this object このオブジェクトのサブコンポーネントを表示/非表示 @@ -3939,12 +4066,12 @@ You can change that in the preferences. Arch_Window - + Window ウィンドウ - + Creates a window object from a selected object (wire, rectangle or sketch) 選択されているオブジェクト（ワイヤー、長方形、スケッチ）から窓オブジェクトを作成します @@ -4214,7 +4341,7 @@ You can change that in the preferences. Draft - + Writing camera position カメラ位置を書き込み @@ -4651,7 +4778,7 @@ You can change that in the preferences. 透明度: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. 一部のIFCビューワーでは押し出し部品としてエクスポートされたオブジェクトを読み取れないことがあります。これを使用するとすべてのオブジェクトを強制的にBREPジオメトリーとしてエクスポートします。 @@ -4691,7 +4818,7 @@ You can change that in the preferences. 厚み - + Force export as Brep Brepとして強制エクスポート @@ -4721,7 +4848,7 @@ You can change that in the preferences. DAE - + Export options エクスポート・オプション @@ -4931,22 +5058,22 @@ You can change that in the preferences. 4角形を許可 - + Use triangulation options set in the DAE options page DAEオプションページで三角形分割オプションを使用 - + Use DAE triangulation options DAE三角形分割オプションを使用 - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. IFC内で曲面として表現できない曲面形状は平らな面に分解されます。チェックされている場合、同一平面上の面を結合するためにいくつかの追加計算が実行されます。 - + Join coplanar facets when triangulating 三角形分割時に同一平面上の面を結合 @@ -4986,12 +5113,12 @@ You can change that in the preferences. スプレッドシートからIFCプロパティをインポートします - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions UIDの無いオブジェクトをエクスポートする場合、生成されたUIDがFreeCADオブジェクトの内部に保存されます。このUIDはオブジェクトを次回エクスポートする場合に使用され、これによってバージョン間の差分を小さくできます。 - + Store IFC universal ID in FreeCAD objects FreeCADオブジェクトにIFCユニバーサルIDを保存 @@ -5061,17 +5188,17 @@ You can change that in the preferences. 多層壁を分割 - + Warning, experimental feature! 警告。これは実験的な機能です！ - + Use IfcOpenShell serializer if available 利用可能な場合にはIfcOpenShellシリアライザーを使用 - + Export 2D objects as IfcAnnotations 2DオブジェクトをIfcAnnotationsとしてエクスポート @@ -5096,12 +5223,12 @@ You can change that in the preferences. インポート中に表示をフィット - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. チェックされている場合、全てのFreeCADオブジェクトプロパティーがエクスポートされるオブジェクトの中に保存され、再インポート時に完全なパラメトリックモデルを再構築できます。 - + Export full FreeCAD parametric model 完全なFreeCADパラメトリックモデルをエクスポート @@ -5156,22 +5283,22 @@ You can change that in the preferences. 除外リスト： - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5236,14 +5363,49 @@ You can change that in the preferences. 線の色 - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.qm b/src/Mod/Arch/Resources/translations/Arch_kab.qm index efacb8a4db..43b6d8d939 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_kab.qm and b/src/Mod/Arch/Resources/translations/Arch_kab.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.ts b/src/Mod/Arch/Resources/translations/Arch_kab.ts index 5c122692cf..caaafe56a4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_kab.ts +++ b/src/Mod/Arch/Resources/translations/Arch_kab.ts @@ -44,12 +44,12 @@ The object this component is cloning - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object @@ -79,7 +79,7 @@ The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -114,7 +114,7 @@ The computed floor area of this floor - + The placement of this object The placement of this object @@ -144,12 +144,12 @@ The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -194,22 +194,22 @@ The area of this panel - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Isuddas @@ -1717,12 +1742,12 @@ Create Axis - + Remove Kkes - + Add Rnu @@ -1832,87 +1857,87 @@ Timeẓri n - + Create Section Plane Create Section Plane - + Create Site Create Site - + Create Structure Create Structure - + Create Wall Create Wall - + Width Tehri - + Height Awrir - + Error: Invalid base object Error: Invalid base object - + This mesh is an invalid solid This mesh is an invalid solid - + Create Window Create Window - + Edit Ẓreg - + Create/update component Create/update component - + Base 2D object Base 2D object - + Wires Wires - + Create new component Create new component - + Name Isem - + Type Anaw - + Thickness Tuzert @@ -1922,7 +1947,7 @@ Error: Couldn't determine character encoding - + file %s successfully created. file %s successfully created. @@ -1972,32 +1997,32 @@ Create Stairs - + Length Teɣzi - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Smezdi iɣraben - + Please select only wall objects Please select only wall objects - + Merge Walls Smezdi iɣraben @@ -2012,7 +2037,7 @@ Error computing the shape of this object - + Create Structural System Create Structural System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Height (mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category Taggayt - + Key Tasarut @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Azal - + Unit Anaw - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Erẓ tiɣmert - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Asiẓi @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Centre - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Gauche + + + + Right + Droit + + + + Use sketches + Use sketches + + + + Structure + Taɣessa + + + + Window + Window + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Checks the selected objects for problems - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Asuddis - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Smezdi iɣraben - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Adig - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Taɣessa - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Bdu aḥedqis @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Asfaylu - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. Tafrawant: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Tuzert - + Force export as Brep Force export as Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Ini n yizirig - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.qm b/src/Mod/Arch/Resources/translations/Arch_ko.qm index 57ab34472b..7f32ea7392 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ko.qm and b/src/Mod/Arch/Resources/translations/Arch_ko.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index aa4c8620e6..8471e6d710 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -44,12 +44,12 @@ The object this component is cloning - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object @@ -79,7 +79,7 @@ 이 오브젝트의 수직면 모든 면적 - + The area of the projection of this object onto the XY plane XY 평면 위에 이 오브젝트의 투영 면적 @@ -114,7 +114,7 @@ 이 층의 계산된 바닥 면적 - + The placement of this object 이 오브젝트의 배치 @@ -144,12 +144,12 @@ The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -194,22 +194,22 @@ The area of this panel - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Components @@ -1717,12 +1742,12 @@ 축 만들기 - + Remove 제거 - + Add 추가 @@ -1832,87 +1857,87 @@ 보기 - + Create Section Plane 단면 평면을 만들기 - + Create Site 사이트 만들기 - + Create Structure 구조 만들기 - + Create Wall 벽 만들기 - + Width 너비 - + Height 높이 - + Error: Invalid base object 오류: 잘못 된 기본 개체 - + This mesh is an invalid solid 이 메시는 유효하지 않은 솔리드입니다 - + Create Window 창 만들기 - + Edit 편집 - + Create/update component 구성 요소 만들기/갱신 - + Base 2D object 기본 개체 - + Wires 전선 - + Create new component 새 구성 요소 만들기 - + Name 이름 - + Type 타입 - + Thickness 두께 @@ -1922,7 +1947,7 @@ 오류: 문자 인코딩을 확인할 수 없습니다. - + file %s successfully created. %s 파일 생성 성공. @@ -1972,32 +1997,32 @@ 계단 만들기 - + Length 돌출 컷(Pocket) 길이 - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape 셰이프를 계산할 수 없습니다 - + Merge Wall 벽 합치기 - + Please select only wall objects Please select only wall objects - + Merge Walls 벽 합치기 @@ -2012,7 +2037,7 @@ 이 개체의 모양을 계산하는 데에 오류가 생겼습니다 - + Create Structural System Create Structural System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Height (mm) - + Create Component 구성 요소 만들기 @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category 카테고리 - + Key Key @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 값 - + Unit 단위 - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer 생성: 모따기(Chamfer) - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Offset @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center 센터 - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + 왼쪽 + + + + Right + 오른쪽 + + + + Use sketches + Use sketches + + + + Structure + Structure + + + + Window + Window + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Checks the selected objects for problems - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls 벽 합치기 - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Site - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Window - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. 투명도: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. 두께 - + Force export as Brep Force export as Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. 선 색 - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.qm b/src/Mod/Arch/Resources/translations/Arch_lt.qm index 6cc5bf77a3..f1eef05b98 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_lt.qm and b/src/Mod/Arch/Resources/translations/Arch_lt.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.ts b/src/Mod/Arch/Resources/translations/Arch_lt.ts index 57992b500e..10eabfc19d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_lt.ts +++ b/src/Mod/Arch/Resources/translations/Arch_lt.ts @@ -44,12 +44,12 @@ Objektas, kurį klonuoja ši dalis - + Other shapes that are appended to this object Kiti pavidalai, pridėti prie šio objekto - + Other shapes that are subtracted from this object Kiti pavidalai, kurie yra išimti iš šio objekto @@ -79,7 +79,7 @@ Visų šio objekto statmenų sienų plotas - + The area of the projection of this object onto the XY plane Šio objekto projekcijos į XY plokštumą plotas @@ -114,7 +114,7 @@ Apskaičiuotasis šių grindų plotas - + The placement of this object Šio objekto išdėstymas @@ -144,12 +144,12 @@ Profilio posūkio kampas aplink jo išstūmimo ašį - + The length of this element, if not based on a profile Šio elemento ilgis, jei jis nėra ant profilio - + The width of this element, if not based on a profile Šio elemento plotis, jei jis nėra ant profilio @@ -194,22 +194,22 @@ Šio skydelio plotas - + The facemaker type to use to build the profile of this object Sienų kūriklio, naudojamo šio objekto profiliui sukurti, rūšis - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Šio objekto išstūmimo krypties normalė (palikite (0,0,0) automatiniam normalės parinkimui) - + The linked object Susietas objektas - + The line width of the rendered objects Atvaizduotų objektų linijos storis @@ -349,7 +349,7 @@ Šio elemento aukštis - + The structural nodes of this element Šį elementą sudarantys mazgai @@ -614,132 +614,132 @@ Skaičiuoklės lakštas rezultatų spausdinimui - + If false, non-solids will be cut too, with possible wrong results. Jei nurodyta „Netiesa“, nepilnaviduriai kūnai bus taip pat pjaustomi, galimai klaidingai. - + The display length of this section plane Pjūvio plokštumos ilgio rodmuo - + The display height of this section plane Pjūvio plokštumos aukščio rodmuo - + The size of the arrows of this section plane Pjūvio plokštumos rodyklių dydis - + Show the cut in the 3D view Rodyti pjūvį 3D vaizde - + The rendering mode to use Naudoti atvaizdavimo būdą - + If cut geometry is shown or not Jeigu iškirpta geometrija yra vaizduojama arba ne - + If cut geometry is filled or not Jeigu iškirpta geometrija yra užpildyta arba ne - + The size of the texts inside this object Rašmenų dydis šio objekto viduje - + If checked, source objects are displayed regardless of being visible in the 3D model Jeigu patikrinta, šaltinio objektai yra vaizduojami neatsižvelgiant į tai kaip jie rodomi 3D modelyje - + The base terrain of this site Vietos reljefo pagrindas - + The postal or zip code of this site Vietos pašto kodas - + The city of this site Vietos miestas - + The country of this site Vietos šalis - + The latitude of this site Vietos platuma. - + Angle between the true North and the North direction in this document Kampas tarp tikrosios šiaurės ir šiaurės krypties šiame dokumente - + The elevation of level 0 of this site Vietos cokolinio aukšto aukštis virš jūros lygio - + The perimeter length of this terrain Šios vietovės perimetro ilgis - + The volume of earth to be added to this terrain Pridedamas grunto tūris ant reljefo - + The volume of earth to be removed from this terrain Nuimamas grunto tūris nuo reljefo - + An extrusion vector to use when performing boolean operations Išstūmimo kryptis naudojama atliekant dvejetainius veiksmus - + Remove splitters from the resulting shape Pašalinti dalytuvus galutiniame kūne - + Show solar diagram or not Rodyti ar slėpti saulės pakilimo kampo grafiką - + The scale of the solar diagram Saulės pakilimo grafiko mastelis - + The position of the solar diagram Saulės posvyrio kampo grafiko padėtis - + The color of the solar diagram Saulės pakilimo grafiko spalva @@ -785,81 +785,76 @@ - A zone this space is part of - Šios erdvės zona yra dalis - - - The number of people who typically occupy this space Žmonių skaičius, kuris paprastai užima šią vietą - + The electric power needed to light this space in Watts Elektrinė galia, reikalinga šiai erdvei apšviesti W - + The electric power needed by the equipment of this space in Watts Elektros galia reikalinga šios erdvės įranginiams Vatais (W) - + If True, Equipment Power will be automatically filled by the equipment included in this space Jei nurodyta „Tiesa“, Įrangos galia bus savaime įtraukta į įrangos, įtrauktos į šią erdvę, savybes - + The type of air conditioning of this space Šios erdvės vėdinimo įrangos tipas - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Rodyti tekstą. Įterpti atitinkamus duomenis naudokite $area, $label, $tag, $floor, $walls, $ceiling - + The name of the font Šrifto pavadinimas - + The color of the area text Teksto fono spalva - + The size of the text font Teksto šrifto dydis - + The size of the first line of text Pirmosios teksto eilutės dydis - + The space between the lines of text Atstumas tarp teksto eilučių - + The position of the text. Leave (0,0,0) for automatic position Teksto padėtis. Palikite (0,0,0) padėčiai savaime nustatyti - + The justification of the text Teksto lygiavimas - + The number of decimals to use for calculated texts Skaičių kiekis po kablelio skaičiuojamiems tekstams - + Show the unit suffix Rodyti priesagą @@ -939,102 +934,102 @@ Atstumas tarp laiptų rėmelio ir struktūros - + An optional extrusion path for this element Galimas papildomas tūrio išstūmimo kelias šiam elementui - + The height or extrusion depth of this element. Keep 0 for automatic Elemento aukštis arba išstūmimo gylis. Reikšmė 0 automatinis - + A description of the standard profile this element is based upon Standartinio profilio aprašymas pagal elementą - + Offset distance between the centerline and the nodes line Postūmio atstumas tarp centrinės linijos ir mazgų linijos - + If the nodes are visible or not Jeigu mazgas yra matomas arba ne - + The width of the nodes line Mazgo linijų plotis - + The size of the node points Mazgo taškų dydis - + The color of the nodes line Mazgo linijos spalva - + The type of structural node Konstrukcijų mazgo tipas - + Axes systems this structure is built on Ašių sistema pagal sukurtą konstrukciją - + The element numbers to exclude when this structure is based on axes Neįtrauktų elementų skaičius kai ši konstrukcija yra sukurta ant ašių - + If true the element are aligned with axes Jei nurodyta „Tiesa“, elementas bus sutapdintas su ašimis - + The length of this wall. Not used if this wall is based on an underlying object Sienos ilgis. Nenaudojamas jeigu siena sukurta ant po ja esančio objekto - + The width of this wall. Not used if this wall is based on a face Sienos storis. Nenaudojamas jeigu siena kuriama ant paviršiaus - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Sienos aukštis. Reikšmė 0 automatinis. Nenaudojama jeigu siena sukurta pilnaviduriais tūriais - + The alignment of this wall on its base object, if applicable Sienos lygiavimas ant bazės objekto, jeigu galimas - + The face number of the base object used to build this wall Bazinio objekto plokštumų skaičius sienai sukurti - + The offset between this wall and its baseline (only for left and right alignments) Postūmis tarp šios sienos ir jos pagrindo linijos (tik kairinei arba dešininei lygiuotei) - + The normal direction of this window Lango kryptis (vidus-laukas) - + The area of this window Lango plotas @@ -1049,7 +1044,7 @@ Pasirinktinis papildomas išdėstymas, pridedamas prie skerspjūvio, panaudojamas prieš išstumiant tai - + Opens the subcomponents that have a hinge defined Atidaro subkomponentus kurie turi nustatytus vyrius-lankstus @@ -1089,12 +1084,12 @@ Sluoksnio storių sąrašas - + The line color of the projected objects Projekciniuose vaizduose rodomo objekto linijų spalva - + The color of the cut faces (if turned on) Pjūvyje rodomų paviršių spalva (jeigu įjungta) @@ -1104,7 +1099,7 @@ Laiptasijų užleidimas virš pakopų apačios - + The number of the wire that defines the hole. A value of 0 means automatic Laidų kiekis nustatantis skylę. Reikšmė 0 automatinis @@ -1194,7 +1189,7 @@ Individualus atstumas tarp armatūrų - + Shape of rebar Armatūros lankstinio forma @@ -1204,17 +1199,17 @@ Apgręžti stogo kryptį, jeigu bus netinkama - + Shows plan opening symbols if available Rodyti plane angų žymėjimus jeigu galima - + Show elevation opening symbols if available Rodyti fasaduose angų žymėjimus jeigu galima - + The objects that host this window Objektai kurie laiko langą @@ -1269,12 +1264,12 @@ Taško lygis (0,0,0) šiame lygyje - + The shape of this object Objekto forma - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block Bloko aukštis - + The horizontal offset of the first line of blocks Horizontalus atsitraukimas nuo pirmos blokų linijos - + The horizontal offset of the second line of blocks Horizontalus atsitraukimas nuo antros blokų linijos - + The size of the joints between each block Jungties tarp blokų dydis - + The number of entire blocks Visų blokų skaičius - + The number of broken blocks Išskaidytų blokų skaičius - + The components of this window Lango komponentai - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Lango angos gylis. Reikšmė 0 bus suskaičiuota automatiškai. - + An optional object that defines a volume to be subtracted from hosts of this window Galimas tūrinis objektas iškerpamas iš sienos langui - + The width of this window Lango plotis - + The height of this window Lango aukštis - + The preset number this window is based on Kuriamo lango nustatymų ruošinio skaičius - + The frame size of this window Lango rėmo dydis - + The offset size of this window Lango atsitraukimo dydis - + The width of louvre elements Ventiliacijos grotelių plotis - + The space between louvre elements Atstumas tarp ventiliacijos grotelių - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Laidų kiekis nustatantis skylę. Reikšmė 0 dydis bus suskaičiuotas automatiškai @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Dalys @@ -1717,12 +1742,12 @@ Kurti ašį - + Remove Pašalinti - + Add Pridėti @@ -1832,87 +1857,87 @@ Vaizdas - + Create Section Plane Sukurti pjūvio plokštumą - + Create Site Kurti sklypą - + Create Structure Kurti konstrukciją - + Create Wall Kurti sieną - + Width Plotis - + Height Aukštis - + Error: Invalid base object Klaida: Negalimas bazės objektas - + This mesh is an invalid solid Šis plokštumų tinklas netinkamas pilnaviduriui tūriui - + Create Window Kurti langą - + Edit Taisyti - + Create/update component Kurti/atnaujinti komponentą - + Base 2D object Bazė 2D objektas - + Wires Laidai - + Create new component Kurti naują komponentą - + Name Pavadinimas - + Type Rūšis - + Thickness Storis @@ -1922,7 +1947,7 @@ Error: Couldn't determine character encoding - + file %s successfully created. file %s successfully created. @@ -1972,32 +1997,32 @@ Create Stairs - + Length Length - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls @@ -2012,7 +2037,7 @@ Error computing the shape of this object - + Create Structural System Create Structural System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Height (mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Sienos gali būti kuriamos tik ant Dalių arba Plokštumų tinklo objektų - + Set text position Nustatyti teksto padėtį - + Category Kategorija - + Key Raktažodis @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Reikšmė - + Unit Vienetas - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Kurti prijungimą - + Precast elements Gelžbetonio elementai - + Slab type Plokštės tipas - + Chamfer Chamfer - + Dent length Įdubimo ilgis - + Dent width Įdubimo plotis - + Dent height Įdubimo aukštis - + Slab base Plokštės bazė - + Number of holes Skylių skaičius - + Major diameter of holes Didysis skylės diametras - + Minor diameter of holes Mažasis skylės diametras - + Spacing between holes Atstumas tarp skylių - + Number of grooves Griovelių skaičius - + Depth of grooves Griovelių gylis - + Height of grooves Griovelių aukštis - + Spacing between grooves Atstumas tarp griovelių - + Number of risers Popakopių skaičius - + Length of down floor Length of down floor - + Height of risers Popakopių aukštis - + Depth of treads Pakopų gylis - + Precast options Gelžbetonio pasirinktys - + Dents list Įdubimų sąrašas - + Add dent Įterpti įdubimą - + Remove dent Pašalinti įdubimą - + Slant Nuožulnumas - + Level Lygis - + Rotation Sukimas - + Offset Offset @@ -2422,58 +2447,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Žiniaraštis - + There is no valid object in the selection. Site creation aborted. Nei vienas iš surinktų objektų netinkamas. Sklypo kūrimas atšaukiamas. - + Node Tools Mazgo Įrankiai - + Reset nodes Atitaisyti mazgus - + Edit nodes Redaguoti mazgus - + Extend nodes Tęsti mazgus - + Extends the nodes of this element to reach the nodes of another element Elemento mazgai tęsiami, kol pasiekia prijungto kito elemento mazgus - + Connect nodes Sujungti mazgus - + Connects nodes of this element with the nodes of another element Sujungia elemento mazgus su kito elemento mazgais - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Susikirtimas surastas. @@ -2485,22 +2510,22 @@ Site creation aborted. Durys - + Hinge Vyriai/Lankstai - + Opening mode Angos būsena - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2530,17 +2555,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2625,17 +2650,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2747,7 +2772,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2897,7 +2922,7 @@ Floor creation aborted. Common vertex not found - Common vertex not found + Nerasta jokia įprastinė viršūnė @@ -2930,47 +2955,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Vidurys - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2981,77 +3006,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3091,7 +3116,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3101,7 +3126,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3117,45 +3142,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Kairė + + + + Right + Dešinys + + + + Use sketches + Use sketches + + + + Structure + Structure + + + + Window + Langas + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3368,21 +3508,16 @@ You can change that in the preferences. Checks the selected objects for problems Checks the selected objects for problems - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Klonuoja daiktą ir padarydamas jį neapibrėžta architektūrine detale @@ -3403,12 +3538,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Sukuria neapibrėžtą architektūrinę detalę @@ -3442,12 +3577,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3541,23 +3676,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3586,12 +3713,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3797,12 +3924,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3823,12 +3950,12 @@ You can change that in the preferences. Arch_Site - + Site Site - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -3875,12 +4002,12 @@ You can change that in the preferences. Arch_Structure - + Structure Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -3888,12 +4015,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -3901,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3914,12 +4041,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3940,12 +4067,12 @@ You can change that in the preferences. Arch_Window - + Window Langas - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4216,7 +4343,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4652,7 +4779,7 @@ You can change that in the preferences. Paviršiaus permatomumas: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4692,7 +4819,7 @@ You can change that in the preferences. Storis - + Force export as Brep Force export as Brep @@ -4722,7 +4849,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4932,22 +5059,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Kreivės, kurių neįmanoma aprašyti IFC kreivėmis, yra suskaidomos į plokščius paviršius. Jei tai pažymėta, atliekami papildomi skaičiavimai, kad apjungti vienoje plokštumoje esančius paviršius. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4987,12 +5114,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5062,17 +5189,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5097,12 +5224,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5157,22 +5284,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5214,7 +5341,7 @@ You can change that in the preferences. Solid - Pilnaviduris kūnas + Pilnaviduris daiktas @@ -5237,14 +5364,49 @@ You can change that in the preferences. Linijos spalva - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.qm b/src/Mod/Arch/Resources/translations/Arch_nl.qm index fdd2f8b026..de5caecc47 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_nl.qm and b/src/Mod/Arch/Resources/translations/Arch_nl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index 00fd355ad6..9c406de7eb 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -44,12 +44,12 @@ Het object dit van dit onderdeel klonen - + Other shapes that are appended to this object Andere vormen die gehecht zijn aan dit object - + Other shapes that are subtracted from this object Andere vormen die afgetrokken zijn van dit object @@ -79,7 +79,7 @@ Het gebied van alle verticale vlakken van dit object - + The area of the projection of this object onto the XY plane Het gebied van de projectie van dit object op het XY-vlak @@ -114,7 +114,7 @@ De berekende oppervlakte van deze vloer - + The placement of this object De plaatsing van dit object @@ -144,12 +144,12 @@ De rotatie van het profiel om de extrusie as - + The length of this element, if not based on a profile De lengte van dit element, indien niet gebaseerd op een profiel - + The width of this element, if not based on a profile De breedte van dit element, indien niet gebaseerd op een profiel @@ -194,22 +194,22 @@ Het gebied van dit venster - + The facemaker type to use to build the profile of this object Het type facemaker dat moet worden gebruikt om het profiel van dit object te maken - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) De normale extrusierichting van dit opject (houd (0,0,0) voor automatische normaal) - + The linked object Het gekoppelde object - + The line width of the rendered objects De lijndikte van de weergegeven objecten @@ -349,7 +349,7 @@ De hoogte van dit element - + The structural nodes of this element De structuur knooppunten van dit element @@ -614,132 +614,132 @@ Het werkblad om de resultaten van af te drukken - + If false, non-solids will be cut too, with possible wrong results. Wanneer onwaar, dan zullen de niet-massieven ook geknipt worden met mogelijke onjuiste resultaten. - + The display length of this section plane De weergavelengte van dit sectievlak - + The display height of this section plane De weergavehoogte van dit sectievlak - + The size of the arrows of this section plane De grootte van de pijlen van dit sectievlak - + Show the cut in the 3D view Toon de snede in 3D-weergave - + The rendering mode to use De rendermethode te gebruiken - + If cut geometry is shown or not Na het knippen zal de geometrie wel of niet worden weergegeven - + If cut geometry is filled or not Na het knippen zal de geometrie wel of niet worden weergegeven - + The size of the texts inside this object De grootte van de teksten binnen dit object - + If checked, source objects are displayed regardless of being visible in the 3D model Indien aangevinkt, worden bronobjecten weergegeven ongeacht de zichtbaarheid in het 3D-model - + The base terrain of this site Het basis terrein van deze plaats - + The postal or zip code of this site De postcode van deze site - + The city of this site De stad van deze site - + The country of this site Het land van deze site - + The latitude of this site De breedtegraad van deze site - + Angle between the true North and the North direction in this document Hoek tussen het ware noorden en de noordrichting van dit project - + The elevation of level 0 of this site De peilhoogte van level 0 van dit terrein - + The perimeter length of this terrain De lengte van de omtrek van dit terrein - + The volume of earth to be added to this terrain Het volume aan grond dat wordt toegevoegd aan dit terrein - + The volume of earth to be removed from this terrain Het volume aan grond dat wordt verwijderd van dit terrein - + An extrusion vector to use when performing boolean operations Een extrusie vector gebruiken bij het uitvoeren van booleaanse operatie - + Remove splitters from the resulting shape Splitters uit de resulterende vorm verwijderen - + Show solar diagram or not Zonnediagram tonen of niet - + The scale of the solar diagram Schaal van het zonnediagram - + The position of the solar diagram Positie van het zonnediagram - + The color of the solar diagram Kleur van het zonnediagram @@ -785,81 +785,76 @@ - A zone this space is part of - Een zone waarvan deze ruimte onderdeel is - - - The number of people who typically occupy this space Het aantal mensen dat meestal deze ruimte bezetten - + The electric power needed to light this space in Watts Het benodigde elektrisch vermogen om deze ruimte te verlichten in Watt - + The electric power needed by the equipment of this space in Watts Het elektrisch vermogen van de apparaten in deze ruimte in Watt - + If True, Equipment Power will be automatically filled by the equipment included in this space Wanneer waar, dan wordt het vermogen van de apparatuur automatisch gevuld door de apparatuur die aanwezig is in in deze ruimte - + The type of air conditioning of this space Het type airconditioning in deze ruimte - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data De tekst weergeven. Gebruik $area, $label, $tag, $floor, $walls, $ceiling om de betrokken gegevens in te voegen - + The name of the font De naam van het lettertype - + The color of the area text De kleur van het gebied tekst - + The size of the text font De grootte van het lettertype - + The size of the first line of text De grootte van de eerste regel tekst - + The space between the lines of text De ruimte tussen de lijnen tekst - + The position of the text. Leave (0,0,0) for automatic position De positie van de tekst. (0,0,0) behouden voor automatisch positioneren - + The justification of the text De uitvulling van de tekst - + The number of decimals to use for calculated texts Het aantal te gebruiken decimalen voor berekende tekst - + Show the unit suffix Eenheid-achtervoegsel tonen @@ -939,102 +934,102 @@ De afstand tussen de rand van de trap en de structuur - + An optional extrusion path for this element Een optionele 3D route voor dit element - + The height or extrusion depth of this element. Keep 0 for automatic De hoogte of 3D-diepte van dit element. Houd 0 voor automatisch - + A description of the standard profile this element is based upon Een beschrijving van het standaardprofiel waar dit element op gebaseerd is - + Offset distance between the centerline and the nodes line De afstand tussen de middellijn en de knooppunten-lijn - + If the nodes are visible or not Als de nodes zichtbaar zijn of niet - + The width of the nodes line De breedte van de lijn van het knooppunt - + The size of the node points De omvang van het knooppunt - + The color of the nodes line De kleur van de nodes lijn - + The type of structural node Het soort structurele knooppunt - + Axes systems this structure is built on Assenstelsel waarop deze structuur gebouwd is - + The element numbers to exclude when this structure is based on axes Het aantal elementen dat wordt uitgesloten wanneer deze structuur gebaseerd is op assen - + If true the element are aligned with axes Wanneer waar, dan wordt het element uigelijnd met de assen - + The length of this wall. Not used if this wall is based on an underlying object De lengte van deze muur. Dit wordt niet gebruikt als deze muur is gebaseerd op een onderliggend object - + The width of this wall. Not used if this wall is based on a face De breedte van deze muur. Ongebruikt wanneer deze muur is gebaseerd op een onderliggend object - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid De hoogte van deze muur. Gebruik 0 voor automatisch. Ongebruikt als deze muur is gebaseerd op een massief object - + The alignment of this wall on its base object, if applicable De richting van deze muur ten opzichte van zijn basisobject, indien toepasbaar - + The face number of the base object used to build this wall Het vlaknummer van het basisobject dat wordt gebruikt om deze muur op te bouwen - + The offset between this wall and its baseline (only for left and right alignments) De tussenafstand tussen deze muur en zijn basislijn (alleen voor links en rechtse uitlijningen) - + The normal direction of this window De normale richting van dit venster - + The area of this window Het gebied van dit venster @@ -1049,7 +1044,7 @@ Een optionele extra plaatsing toevoegen aan het profiel voor het verdikken - + Opens the subcomponents that have a hinge defined Opent de subonderdelen die een scharnier gedefinieerd hebben @@ -1089,12 +1084,12 @@ De lijst met diktes van lagen - + The line color of the projected objects De lijnkleur van de geprojecteerde objecten - + The color of the cut faces (if turned on) De kleur van de oppervlaktes van de doorsnede (indien ingeschakeld) @@ -1104,7 +1099,7 @@ De wel van de trede - + The number of the wire that defines the hole. A value of 0 means automatic Het nummer van de draad die het gat definieert. Een waarde van 0 betekent automatisch @@ -1194,7 +1189,7 @@ De aangepaste afstand van de wapening - + Shape of rebar Vorm van de wapening @@ -1204,17 +1199,17 @@ Draai de richting van het dak wanneer de richting onruist is - + Shows plan opening symbols if available Toont openings plan van symbolen indien beschikbaar - + Show elevation opening symbols if available Toon verhoogde openings symbolen indien beschikbaar - + The objects that host this window De objecten die dit venster verzorgen @@ -1269,12 +1264,12 @@ Het niveau van het (0,0,0) punt van dit niveau - + The shape of this object De vorm van dit object - + The line width of this object De lijnbreedte van dit object @@ -1414,47 +1409,47 @@ Wanneer waar, dan worden de kleuren van het gelinkte bestand up-to-date gehouden - + The objects that must be considered by this section plane. Empty means the whole document. De objecten die door dit sectievlak moeten worden overwogen. Leeg betekent het hele document. - + The transparency of this object De mate van doorzichtigheid van dit object - + The color of this object De kleur van dit object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) De afstand tussen te knippen vlak en de werkelijke weergegeven knip (Houd dit een zeer lage waarde maar niet nul) - + The street and house number of this site, with postal box or apartment number if needed De straat en huisnummer van deze plek met brievenbus of appartementnummer indien benodigd - + The region, province or county of this site De regio, provincie of het land van deze plek - + A url that shows this site in a mapping website Een url die deze plek weergeeft op eek kaarten website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Een optionele offset tussen de oorsprong van het model (0,0,0) en het punt aangegeven door de geo-coördinaten - + Specifies if this space is internal or external Geeft aan of deze ruimte intern of extern is @@ -1504,97 +1499,97 @@ De 'linker contour' van alle segmenten van de trap - + Enable this to make the wall generate blocks Activeer dit om de muur blokken te laten genereren - + The length of each block De lengte van ieder blok - + The height of each block De lengte van ieder blok - + The horizontal offset of the first line of blocks De horizontale compensatie van de eerste regel van blokken - + The horizontal offset of the second line of blocks De horizontale compensatie van de tweede regel van blokken - + The size of the joints between each block De grootte van de verbindingen tussen elk blok - + The number of entire blocks Het aantal hele blokken - + The number of broken blocks Het aantal gebroken blokken - + The components of this window De componenten van dit raam - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. De diepte van het gat dat dit raam maakt in zijn host-object. Wanneer deze 0 is dan wordt de waarde automatisch berekend. - + An optional object that defines a volume to be subtracted from hosts of this window Een optioneel object dat een van de hosts van dit venster af te trekken volume definieert - + The width of this window Breedte van dit kozijn - + The height of this window Hoogte van dit kozijn - + The preset number this window is based on Het voorkeuzenummer waar dit venster op gebaseerd is - + The frame size of this window De grootte van het frame van dit raam - + The offset size of this window De compensatie grootte van dit raam - + The width of louvre elements De breedte van de lamellen - + The space between louvre elements De ruimte tussen de lamellen - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Het nummer van de draad die het gat definieert. Wanneer deze op 0 staat dan wordt de waarde automatisch berekend @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Componenten @@ -1717,12 +1742,12 @@ Maak as - + Remove Verwijderen - + Add Toevoegen @@ -1832,87 +1857,87 @@ Weergave van - + Create Section Plane Sectievlak maken - + Create Site Ondergrond maken - + Create Structure Structuur aanmaken - + Create Wall Muur maken - + Width Breedte - + Height Hoogte - + Error: Invalid base object Fout: ongeldig basisvoorwerp - + This mesh is an invalid solid Dit net vormt een ongeldige solid - + Create Window Maak venster - + Edit Bewerken - + Create/update component Component maken of bijwerken - + Base 2D object 2D basisobject - + Wires Draden - + Create new component Maak nieuw component - + Name Naam - + Type Type - + Thickness Dikte @@ -1922,7 +1947,7 @@ Fout: Kan de tekencodering niet bepalen - + file %s successfully created. bestand %s met succes aangemaakt. @@ -1972,32 +1997,32 @@ Trap maken - + Length Lengte - + Error: The base shape couldn't be extruded along this tool object Fout: De basis vorm kon niet worden verdreven langszij dit werktuig object - + Couldn't compute a shape Kon geen vorm berekenen - + Merge Wall Muren samenvoegen - + Please select only wall objects Selecteer alleen muur objecten - + Merge Walls Wanden samenvoegen @@ -2012,7 +2037,7 @@ Fout tijdens het berekenen van de vorm van dit object - + Create Structural System Creëer Structureel Systeem @@ -2172,7 +2197,7 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Hoogte (mm) - + Create Component Creëer Component @@ -2187,17 +2212,17 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Wanden kunnen alleen worden gebaseerd op geheel of gedeeltelijk Maas objecten - + Set text position Positie van de tekst instellen - + Category Categorie - + Key Sleutel @@ -2207,12 +2232,12 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Waarde - + Unit Eenheid - + Create IFC properties spreadsheet IFC eigenschappen werkblad maken @@ -2242,7 +2267,7 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Maak een paneel plaat - + Facemaker returned an error Facemaker gaf een foutmelding @@ -2267,137 +2292,137 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Creëer verbinding - + Precast elements Prefab elementen - + Slab type Soort flap - + Chamfer Afschuining - + Dent length Deuklengte - + Dent width Deukbreedte - + Dent height Deukhoogte - + Slab base Falp basis - + Number of holes Aantal gaten - + Major diameter of holes Grote diameter van de gaten - + Minor diameter of holes Kleine diameter van de gaten - + Spacing between holes Afstand tussen de gaten - + Number of grooves Aantal groeven - + Depth of grooves Diepte van de groeven - + Height of grooves Hoogte van de groeven - + Spacing between grooves Afstand tussen de groeven - + Number of risers Aantal opstanden - + Length of down floor Lengte van de ondervloer - + Height of risers Hoogte van de opstanden - + Depth of treads Diepte van de aantrede - + Precast options Prefab opties - + Dents list Deuken lijst - + Add dent Deuk toevoegen - + Remove dent Deuk verwijderen - + Slant Schuinte - + Level Niveau - + Rotation Rotatie - + Offset Verschuiving @@ -2422,59 +2447,59 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Planning - + There is no valid object in the selection. Site creation aborted. Er bestaat geen geldige object in de selectie. Plaats creatie afgebroken. - + Node Tools Knooppunt gereedschap - + Reset nodes Reset knooppunten - + Edit nodes Bewerk knooppunten - + Extend nodes Knooppunten uitbreiden - + Extends the nodes of this element to reach the nodes of another element Breidt de knooppunten van dit element uit om de knooppunten van een ander element te bereiken - + Connect nodes Knooppunten verbinden - + Connects nodes of this element with the nodes of another element Verbindt knooppunten van dit element met het knooppunt van een ander element - + Toggle all nodes Alle knooppunten in-/ uitschakelen - + Toggles all structural nodes of the document on/off Alle structurele knooppunten van het document in-/ uitschakelen - + Intersection found. Kruispunt gevonden. @@ -2485,22 +2510,22 @@ Plaats creatie afgebroken. Deur - + Hinge Scharnier - + Opening mode Openings mode - + Get selected edge Krijg de geselcteerde rand - + Press to retrieve the selected edge Druk om de geselecteerde rand terug te halen @@ -2530,17 +2555,17 @@ Plaats creatie afgebroken. Nieuwe laag - + Wall Presets... Voorinstellingen muur... - + Hole wire Draad gat - + Pick selected Neem geselecteerde @@ -2625,17 +2650,17 @@ Plaats creatie afgebroken. Dit object heeft geen oppervlak - + Space boundaries Begrensde ruimte - + Error: Unable to modify the base object of this wall Fout: Veranderen van de basis van deze muur is niet mogelijk - + Window elements Venster elementen @@ -2747,7 +2772,7 @@ Er wordt geen Gebouw gemaakt. Alle goed! Geen problemen gevonden - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Het object heeft geen IndustriesFoundationClassesProperties. Spreadsheet annuleren voor: @@ -2930,47 +2955,47 @@ Vloer object wordt niet gemaakt. Geen werkblad gekoppeld aan dit schema - + Section plane settings Doorsnede instellingen - + Objects seen by this section plane: Objecten zichtbaar in deze doorsnede: - + Section plane placement: Plaats doorsnede: - + Rotate X Rotatie X - + Rotate Y Rotatie Y - + Rotate Z Rotatie Z - + Resize Grootte aanpassen - + Center Middelpunt - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2981,77 +3006,77 @@ Andere objecten worden verwijderd uit de selectie. Opmerking: U kunt dat veranderen in de voorkeuren. - + Choose another Structure object: Kies een andere Structuur-object: - + The chosen object is not a Structure Het gekozen object is geen Structuur-object - + The chosen object has no structural nodes Het gekozen object heeft geen structurele knooppunten - + One of these objects has more than 2 nodes Een van deze objecten heeft meer dan 2 knooppunten - + Unable to find a suitable intersection point Kan geen geschikte snijpunt vinden - + Intersection found. Snijpunt gevonden. - + The selected wall contains no subwall to merge De geselecteerde muur bevat geen submuur om mee samen te voegen - + Cannot compute blocks for wall Kan geen blokken voor muur berekenen - + Choose a face on an existing object or select a preset Kies een vlak op een bestaand object of selecteer een voorinstelling - + Unable to create component Er kan geen component gemaakt worden - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Het nummer van de draad, die een gat in het gastheer-object, definieert. Een waarde van nul zal automatisch de grootste draad aannemen - + + default + standaard - + If this is checked, the default Frame value of this window will be added to the value entered here Als u dit selectievakje aanvinkt, zal de standaard Frame-waarde van dit venster worden toegevoegd aan de waarde die u hier invoert - + If this is checked, the default Offset value of this window will be added to the value entered here Als u dit selectievakje aanvinkt, zal de standaard Frame-waarde van dit venster worden toegevoegd aan de waarde die u hier invoert - + pycollada not found, collada support is disabled. pycollada niet gevonden, collada ondersteuning wordt uitgeschakeld. @@ -3091,7 +3116,7 @@ Opmerking: U kunt dat veranderen in de voorkeuren. Fout: uw IfcOpenShell versie is te oud - + Successfully written Met succes geschreven @@ -3101,7 +3126,7 @@ Opmerking: U kunt dat veranderen in de voorkeuren. Een shape met bochten gevonden, berekenen gestart - + Successfully imported Succesvol geïmporteerd @@ -3117,45 +3142,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Voeg geselecteerde toe - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Links + + + + Right + Rechts + + + + Use sketches + Gebruik schetsen + + + + Structure + Structuur + + + + Window + Venster + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3368,21 +3508,16 @@ You can change that in the preferences. Checks the selected objects for problems Controleer de geselecteerde objecten op problemen - - - Explore the contents of an IFC file - Bekijk de inhoud van een IndustriesFoundationClasses bestand - Arch_CloneComponent - + Clone component Kloon onderdeel - + Clones an object as an undefined architectural component Kloont een object als een niet-gedefinieerde architectonisch onderdeel @@ -3403,12 +3538,12 @@ You can change that in the preferences. Arch_Component - + Component Onderdeel - + Creates an undefined architectural component Maakt een ongedefineert architectonisch onderdeel @@ -3442,12 +3577,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3541,23 +3676,15 @@ You can change that in the preferences. De indexcijfers van de te verbergen vlakken - - Arch_IfcExplorer - - - Ifc Explorer - IFC Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFC rekenblad aanmaken... - + Creates a spreadsheet to store IFC properties of an object. Maakt een rekenblad voor het bewaren van IFC eigenschappen van een object. @@ -3586,12 +3713,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Wanden samenvoegen - + Merges the selected walls, if possible Voegt de geselecteerde wanden samen, indien mogelijk @@ -3797,12 +3924,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Sectieplan - + Creates a section plane object, including the selected objects Maakt een sectie vlak object, inclusief de geselecteerde objecten @@ -3823,12 +3950,12 @@ You can change that in the preferences. Arch_Site - + Site Zijde - + Creates a site object including selected objects. Maakt een bouwterrein object met geselecteerde objecten inbegrepen. @@ -3875,12 +4002,12 @@ You can change that in the preferences. Arch_Structure - + Structure Structuur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Maak een structuurobject vanaf nul of van een geselecteerd object (schets, draad, vlak of volume) @@ -3888,12 +4015,12 @@ You can change that in the preferences. Arch_Survey - + Survey Enquête - + Starts survey Start enquête @@ -3901,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep vlag in-/ uitschakelen - + Force an object to be exported as Brep or not Dwing een object geëxporteerd te worden als Brep of niet @@ -3914,12 +4041,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Wissel tussen sub-onderdelen - + Shows or hides the subcomponents of this object Toont of verbergt de subonderdelen voor dit object @@ -3940,12 +4067,12 @@ You can change that in the preferences. Arch_Window - + Window Venster - + Creates a window object from a selected object (wire, rectangle or sketch) Maakt een raam-object van een geselecteerd object (draad, rechthoek of schets) @@ -4216,7 +4343,7 @@ You can change that in the preferences. Draft - + Writing camera position Camerapositie schrijven @@ -4652,7 +4779,7 @@ You can change that in the preferences. Transparantie: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Sommige IFC-kijkers houden niet van objecten die als extrusies geëxporteerd worden. Gebruik dit om alle objecten te forceren om geëxporteerd te worden als BREP geometrie. @@ -4692,7 +4819,7 @@ You can change that in the preferences. Dikte - + Force export as Brep Force export as Brep @@ -4722,7 +4849,7 @@ You can change that in the preferences. DAE - + Export options Exportopties @@ -4932,22 +5059,22 @@ You can change that in the preferences. Vierhoeken toestaan - + Use triangulation options set in the DAE options page Gebruik triangulatieopties die in de DAE-optiespagina ingesteld zijn - + Use DAE triangulation options Gebruik DAE-triangulatieopties - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Gebogen vormen die niet als curven in IFC kunnen worden weergegeven, worden afgebroken tot platte facetten. Als dit is aangevinkt, wordt een extra berekening gemaakt om de coplanaire facetten aan elkaar te verbinden. - + Join coplanar facets when triangulating Coplanaire facetten verbinden bij het trianguleren @@ -4987,12 +5114,12 @@ You can change that in the preferences. Importeer Ifc eigenschappen in werkblad - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Bij het exporteren van objecten zonder UID wordt de gegenereerde UID opgeslagen in het FreeCAD-object voor hergebruik bij de volgende keer dat het object wordt geëxporteerd, wat kleinere verschillen tussen versies geeft - + Store IFC universal ID in FreeCAD objects IFC universal ID opslaan in FreeCAD-objecten @@ -5062,17 +5189,17 @@ You can change that in the preferences. Splits meerlaagse wanden - + Warning, experimental feature! Waarschuwing, experimentele functie! - + Use IfcOpenShell serializer if available IfcOpenShell serializer gebruiken indien beschikbaar - + Export 2D objects as IfcAnnotations 2D-objecten exporteren als IfcAnnotations @@ -5097,12 +5224,12 @@ You can change that in the preferences. Weergave aanpassen tijdens het importeren - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Indien aangevinkt, worden alle eigenschappen van FreeCAD-objecten opgeslagen in de geëxporteerde objecten, waardoor een volledig parametrisch model kan worden aangemaakt bij het opnieuw importeren. - + Export full FreeCAD parametric model Exporteer het volledige FreeCAD parametrische model @@ -5157,22 +5284,22 @@ You can change that in the preferences. Lijst uitsluiten: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Als dit aangevinkt is, zullen, indien mogelijk, soortgelijke entiteiten slechts eenmaal in het bestand worden gebruikt. Dit kan de bestandsgrootte veel kleiner maken, maar zal het minder goed leesbaar maken voor mensen - + Reuse similar entities Gelijkaardige entiteiten hergebruiken - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Indien mogelijk worden IFC-objecten, die geëxtrudeerde rechthoeken zijn, als IfcRectangleProfileDef geëxporteerd. Sommige andere toepassingen hebben echter beruchte problemen met het importeren van die entiteit. Als dit uw geval is, kunt u dit hier uitschakelen (alle profielen worden geëxporteerd als IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef IfcRectangleProfileDef uitschakelen @@ -5237,14 +5364,49 @@ You can change that in the preferences. Lijnkleur - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_no.qm b/src/Mod/Arch/Resources/translations/Arch_no.qm index b441f9f78f..f9b7e34290 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_no.qm and b/src/Mod/Arch/Resources/translations/Arch_no.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_no.ts b/src/Mod/Arch/Resources/translations/Arch_no.ts index 0cc471bfdc..b8e075e247 100644 --- a/src/Mod/Arch/Resources/translations/Arch_no.ts +++ b/src/Mod/Arch/Resources/translations/Arch_no.ts @@ -44,12 +44,12 @@ Objektet som denne komponenten kloner - + Other shapes that are appended to this object Andre former som er lagt til dette objektet - + Other shapes that are subtracted from this object Andre former som er trukket fra dette objektet @@ -79,7 +79,7 @@ Arealet av alle vertikale flater på dette objektet - + The area of the projection of this object onto the XY plane Arealet av projeksjonen av dette objektet på XY-planet @@ -114,7 +114,7 @@ Det kalkulerte etasjearealet av denne etasjen - + The placement of this object Plasseringen av dette objektet @@ -144,12 +144,12 @@ Rotasjonen av profilet rundt ekstruderingsaksen - + The length of this element, if not based on a profile Lengden av dette elementet, om det ikke baseres på et profil - + The width of this element, if not based on a profile Bredden av dette elementet, om det ikke baseres på et profil @@ -194,22 +194,22 @@ Arealet av panelet - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponenter @@ -1717,12 +1742,12 @@ Opprette akse - + Remove Fjern - + Add Legg til @@ -1832,87 +1857,87 @@ Visning av - + Create Section Plane Lag inndelingsplan - + Create Site Opprett byggeplass - + Create Structure Opprett struktur - + Create Wall Opprett vegg - + Width Bredde - + Height Høyde - + Error: Invalid base object Feil: Ugyldig grunnobjekt - + This mesh is an invalid solid This mesh is an invalid solid - + Create Window Lag vindu - + Edit Rediger - + Create/update component Opprett/oppdater komponent - + Base 2D object Base 2D object - + Wires Wires - + Create new component Opprett ny komponent - + Name Navn - + Type Type - + Thickness Tykkelse @@ -1922,7 +1947,7 @@ Feil: Kunne ikke finne tegnkoding - + file %s successfully created. filen %s er opprettet. @@ -1972,32 +1997,32 @@ Lag trapper - + Length Lengde - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls @@ -2012,7 +2037,7 @@ Error computing the shape of this object - + Create Structural System Create Structural System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Height (mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category Kategori - + Key Key @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Verdi - + Unit Enhet - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Skråskjær - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Avsetting @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Center - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Venstre + + + + Right + Høyre + + + + Use sketches + Use sketches + + + + Structure + Structure + + + + Window + Vindu + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Checks the selected objects for problems - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Site - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Vindu - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. Gjennomsiktighet: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Tykkelse - + Force export as Brep Force export as Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Linjefarge - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index 4c34101c66..31d97013d0 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index af37436afe..1fe70a2d60 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -44,12 +44,12 @@ Obiekt jest klonowany przez ten komponent - + Other shapes that are appended to this object Inne kształty dołączone do obiektu - + Other shapes that are subtracted from this object Inne kształty odejmowane od obiektu @@ -79,7 +79,7 @@ Powierzchnia wszystkich pionowych fasetek tego obiektu - + The area of the projection of this object onto the XY plane Powierzchnia rzutu tego obiektu na płaszczyznę XY @@ -114,7 +114,7 @@ Obliczona powierzchnia rzutu tego piętra - + The placement of this object Położenie tego obiektu @@ -144,12 +144,12 @@ Obrót profilu wokół jego osi wytłaczania - + The length of this element, if not based on a profile Długość tego elementu, jeśli nie w oparciu o profil - + The width of this element, if not based on a profile Szerokość tego elementu, jeśli nie w oparciu o profil @@ -194,22 +194,22 @@ Obszar tego panelu - + The facemaker type to use to build the profile of this object Typ facemakera jest używany do utworzenia profilu tego obiektu - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normalny kierunek wytłaczania tego obiektu (utrzymaj (0,0,0) dla typowego automatycznie) - + The linked object Obiekt połączony - + The line width of the rendered objects Gruboć linii renderowanych obiektów @@ -349,7 +349,7 @@ Wysokość tego elementu - + The structural nodes of this element Węzły konstrukcyjne tego elementu @@ -614,132 +614,132 @@ Arkusz do wydrukowania wyników - + If false, non-solids will be cut too, with possible wrong results. W przypadku fałszywego, nie-bryły również zostaną obcięte, z możliwymi błędnymi wynikami. - + The display length of this section plane Widoczna długość tej płaszczyzny przekroju - + The display height of this section plane Widoczna wysokość tej płaszczyzny przekroju - + The size of the arrows of this section plane Rozmiar strzałek na tej płaszczyźnie przekroju - + Show the cut in the 3D view Pokaż cięcie w widoku 3D - + The rendering mode to use Tryb renderowania - + If cut geometry is shown or not Jeżeli pokazana jest geometria cięcia, czy nie - + If cut geometry is filled or not Jeśli geometria cięcia jest wypełniona lub nie - + The size of the texts inside this object Rozmiar tekstów wewnątrz tego obiektu - + If checked, source objects are displayed regardless of being visible in the 3D model Jeśli jest zaznaczone, obiekty źródłowe są wyświetlane niezależnie od tego, czy są widoczne w modelu 3D - + The base terrain of this site Podstawowy teren tej witryny - + The postal or zip code of this site Kod pocztowy działki tej budowlanej - + The city of this site Działka budowlana w obrębie miasta - + The country of this site Działka budowlana w obrębie kraju - + The latitude of this site Szerokość geograficzna działki - + Angle between the true North and the North direction in this document Kat pomiędzy kierunkiem północy geograficznej a północa w tym projekcie - + The elevation of level 0 of this site Wysokość bezwzględna terenu n. p. m. - 0,00 projektu - + The perimeter length of this terrain Długość obwodu tego terenu - + The volume of earth to be added to this terrain Objętość ziemi, która ma zostać dodana do tego terenu - + The volume of earth to be removed from this terrain Objętość ziemi, która ma zostać usunięta z tego terenu - + An extrusion vector to use when performing boolean operations Wektor do wytłaczania do użycia podczas wykonywania operacji wartości logicznych - + Remove splitters from the resulting shape Usuń rozgałęźniki z wynikowego kształtu - + Show solar diagram or not Pokaż wykres słońca lub nie - + The scale of the solar diagram Skala wykresu słońca - + The position of the solar diagram Położenie wykresu słońca - + The color of the solar diagram Kolor wykresu słońca @@ -785,81 +785,76 @@ - A zone this space is part of - Strefa tego pomieszczenia jest częścia - - - The number of people who typically occupy this space Ilość osób zwykle przebywajacych w pomieszczeniu - + The electric power needed to light this space in Watts Moc elektryczna w watach potrzebna do oświetlenia tej przestrzeni - + The electric power needed by the equipment of this space in Watts Zapotrzebowanie mocy elektrycznej dla tego urzadzeń w tym pomieszczeniu - + If True, Equipment Power will be automatically filled by the equipment included in this space Jeśli True, moc urządzenia zostanie automatycznie wypełniona przez sprzęt znajdujący się w tym miejscu - + The type of air conditioning of this space Rodzaj klimatyzacji tej przestrzeni - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Tekst do pokazania. Użyj $area, $label, $tag, $floor, $walls, $ceiling aby wstawić odpowiednie dane - + The name of the font Nazwa czcionki - + The color of the area text Kolor obszaru tekstu - + The size of the text font Rozmiar czcionki - + The size of the first line of text Rozmiar pierwszego wiersza tekstu - + The space between the lines of text Odstęp między wierszami tekstu - + The position of the text. Leave (0,0,0) for automatic position Położenie tekstu. Pozostaw (0,0,0) jako pozycja automatyczna - + The justification of the text Justowanie tekstu - + The number of decimals to use for calculated texts Liczba miejsc dziesiętnych w tekstach obliczanych - + Show the unit suffix Pokaż symbol jednostki @@ -939,102 +934,102 @@ Przesunięcie między krawędzią schodów a konstrukcją - + An optional extrusion path for this element Opcjonalna ścieżka wytłaczania dla tego elementu - + The height or extrusion depth of this element. Keep 0 for automatic Wysokość lub głębokość wytłaczania tego elementu. Zachowaj 0 dla automatycznego - + A description of the standard profile this element is based upon Opis profilu standardowego, na którym opiera się ten element - + Offset distance between the centerline and the nodes line Odległość przesunięcia między linią środkową a linią węzłów - + If the nodes are visible or not Jeśli węzły są widoczne, czy nie - + The width of the nodes line Szerokość linii węzłów - + The size of the node points Rozmiar punktów węzła - + The color of the nodes line Kolor linii węzłów - + The type of structural node Typ węzła strukturalnego - + Axes systems this structure is built on Systemy osi, na których struktura jest zbudowana - + The element numbers to exclude when this structure is based on axes Numery elementów są do wykluczenia, gdy ta struktura jest oparta na osiach - + If true the element are aligned with axes Jeśli to prawda, element jest wyrównany z osiami - + The length of this wall. Not used if this wall is based on an underlying object Długość tej ściany. Nieużywane, jeśli ściana opiera się na ukrytym obiekcie - + The width of this wall. Not used if this wall is based on a face Szerokość tej ściany. Nieużywane, jeśli ściana opiera się na ścianie - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Wysokość tej ściany. Zachowaj 0 dla automatycznego. Nieużywane, jeśli ściana jest oparta na bryle - + The alignment of this wall on its base object, if applicable Wyrównanie tej ściany na jej obiekcie bazowym, jeśli dotyczy - + The face number of the base object used to build this wall Numer ściany bazowego obiektu użytego do zbudowania tej ściany - + The offset between this wall and its baseline (only for left and right alignments) Przesunięcie między tą ścianą a linią bazową (tylko w przypadku wyrównania w lewo i w prawo) - + The normal direction of this window Zwykły kierunek tego okna - + The area of this window Obszar tego okna @@ -1049,7 +1044,7 @@ Opcjonalne dodatkowe miejsce docelowe do dodania do profilu przed jego wytłoczeniem - + Opens the subcomponents that have a hinge defined Otwiera podskładniki, które mają zdefiniowane zawias @@ -1089,12 +1084,12 @@ Lista grubości warstw - + The line color of the projected objects Kolor linii rzutowanych obiektów - + The color of the cut faces (if turned on) Kolor przyciętych powierzchni (jeśli jest włączony) @@ -1104,7 +1099,7 @@ Nakładanie się podłużnic powyżej dołu bieżnika - + The number of the wire that defines the hole. A value of 0 means automatic Numer przewodu definiującego otwór. Wartość 0 oznacza automatyczną @@ -1194,7 +1189,7 @@ Niestandardowe odstępy prętów zbrojeniowych - + Shape of rebar Kształt zbrojenia @@ -1204,17 +1199,17 @@ Odwróć kierunek dachu, jeśli kieruje się w złą stronę - + Shows plan opening symbols if available Wyświetla symbole otwierające płaszczyznę, jeśli są dostępne - + Show elevation opening symbols if available Wyświetl symbole otwierające elewację, jeśli są dostępne - + The objects that host this window Obiekty, które obsługują to okno @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object Kształt tego obiektu - + The line width of this object Szerokość linii tego obiektu @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Przezroczystość tego obiektu - + The color of this object Kolor tego obiektu - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Odległość między płaszczyzną cięcia i rzeczywistym widokiem cięcia (zachowaj bardzo małą wartość, ale nie zerową) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site Region, prowincja lub hrabstwo tej lokalizacji - + A url that shows this site in a mapping website Łącze url, które pokazuje tę budowę w witrynie internetowej - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Opcjonalne przesunięcie między początkiem modelu (0,0,0) a punktem wskazanym przez współrzędne geocentryczne - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ "Lewy zarys" wszystkich segmentów schodów - + Enable this to make the wall generate blocks Włącz to, aby ściana generowała bloki - + The length of each block Długość każdego bloku - + The height of each block Wysokość każdego bloku - + The horizontal offset of the first line of blocks Przesunięcie poziome pierwszej linii bloków - + The horizontal offset of the second line of blocks Przesunięcie poziome drugiej linii bloków - + The size of the joints between each block Rozmiar złącza między każdym blokiem - + The number of entire blocks Liczba całych bloków - + The number of broken blocks Liczba złamanych bloków - + The components of this window Komponenty tego okna - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Głębokość otworu, które to okno tworzy w obiekcie obsługującym. Jeśli 0, wartość zostanie obliczona automatycznie. - + An optional object that defines a volume to be subtracted from hosts of this window Opcjonalny obiekt, który określa zawartość do odjęcia od obsługującego to okno - + The width of this window Szerokość tego okna - + The height of this window Wysokość tego okna - + The preset number this window is based on Numer ustawienia wstępnego, na którym oparte jest to okno - + The frame size of this window Rozmiar ramy tego okna - + The offset size of this window Przesunięcie tego okna - + The width of louvre elements Szerokość elementów rastrowych - + The space between louvre elements Przestrzeń między elementami żaluzji - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Numer drutu definiującego otwór. Jeśli 0, wartość zostanie obliczona automatycznie @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Fragmenty @@ -1717,12 +1742,12 @@ Utwórz Osie - + Remove Usuń - + Add Dodaj @@ -1832,87 +1857,87 @@ Widok - + Create Section Plane Tworzenie płaszczyzny przekroju - + Create Site Tworzenie witryny - + Create Structure Tworzenie struktury - + Create Wall Utwórz ścianę - + Width Szerokość - + Height Wysokość - + Error: Invalid base object Błąd: Nieprawidłowy obiekt podstawowy - + This mesh is an invalid solid Ta siatka nie jest poprawna - + Create Window Utwórz Okno - + Edit Edytuj - + Create/update component Utwórz/uaktualnij komponent - + Base 2D object Podstawowy obiekt 2D - + Wires Przewody - + Create new component Utwórz nowy komponent - + Name Nazwa - + Type Typ - + Thickness Grubość @@ -1922,7 +1947,7 @@ Błąd: Nie można określić kodowania znaków - + file %s successfully created. plik %s utworzony pomyślnie. @@ -1972,32 +1997,32 @@ Tworzenie schodów - + Length Długość - + Error: The base shape couldn't be extruded along this tool object Błąd: Krzywa bazowa nie może być wyciągnięta za pomocą tego narzędzia wzdłuż obiektu - + Couldn't compute a shape Nie można obliczyć kształtu - + Merge Wall Scal ścianę - + Please select only wall objects Proszę wybrać tylko elementy typu ściana - + Merge Walls Scal ściany @@ -2012,7 +2037,7 @@ Błąd obliczeń kształtu tego obiektu - + Create Structural System Stwórz System Konstrukcyjny @@ -2173,7 +2198,7 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Wysokość (mm) - + Create Component Tworzenie komponentu @@ -2188,17 +2213,17 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Ściany mogą być oparta wyłącznie na obiektach Części lub Siatki - + Set text position Ustal położenie tekstu - + Category Kategoria - + Key Klucz @@ -2208,12 +2233,12 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Wartość - + Unit Jednostka - + Create IFC properties spreadsheet Stwórz arkusz właściwości IFC @@ -2243,7 +2268,7 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Utwórz Arkusz Panelu - + Facemaker returned an error Facemaker zwrócił błąd @@ -2268,137 +2293,137 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Utwórz złącze - + Precast elements Prefabrykowane elementy - + Slab type Typ płyty - + Chamfer Faza - + Dent length Długość wycięcia - + Dent width Szerokość wycięcia - + Dent height Wysokość wycięcia - + Slab base Podstawa płyty - + Number of holes Liczba otworów - + Major diameter of holes Główna średnica otworów - + Minor diameter of holes Drobna średnica otworów - + Spacing between holes Odstępy między otworami - + Number of grooves Liczba rowków - + Depth of grooves Głębokość rowków - + Height of grooves Wysokość rowków - + Spacing between grooves Przestrzeń pomiędzy rowkami - + Number of risers Liczba pionów - + Length of down floor Długość dolnej podłogi - + Height of risers Wysokość pionów - + Depth of treads Głębokość stopni - + Precast options Opcje prefabrykacji - + Dents list Lista wycięć - + Add dent Dodaj wygięcie - + Remove dent Usuń wygięcie - + Slant Nachylenie - + Level Kondygnacja - + Rotation Obrót - + Offset Offset @@ -2423,59 +2448,59 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Harmonogram - + There is no valid object in the selection. Site creation aborted. W zaznaczeniu nie ma prawidłowego obiektu. Tworzenie witryny zostało przerwane. - + Node Tools Narzędzia węzłowe - + Reset nodes Zresetuj węzły - + Edit nodes Edytuj węzły - + Extend nodes Rozszerz węzły - + Extends the nodes of this element to reach the nodes of another element Rozszerza punkty węzłowe tego elementu aby dosięgnąć punktów węzłowych innego elementu - + Connect nodes Połącz punkty węzłowe - + Connects nodes of this element with the nodes of another element Połącz punkty węzłowe tego elementu z punktami węzłowymi innego elementu - + Toggle all nodes Przełącz wszystkie węzły - + Toggles all structural nodes of the document on/off Włącza/Wyłącza wszystkie węzły konstrukcyjne dokumentu - + Intersection found. Znaleziono przecięcie. @@ -2487,22 +2512,22 @@ Tworzenie witryny zostało przerwane. Drzwi - + Hinge Zawias - + Opening mode Tryb otwierania - + Get selected edge Zdobądź wybraną krawędź - + Press to retrieve the selected edge Naciśnij, aby pobrać wybraną krawędź @@ -2532,17 +2557,17 @@ Tworzenie witryny zostało przerwane. Nowa warstwa - + Wall Presets... Ustawienia Wstępne Ściany... - + Hole wire Szkielet otworu - + Pick selected Wybierz zaznaczone @@ -2627,17 +2652,17 @@ Tworzenie witryny zostało przerwane. Obiekt nie ma powierzchni - + Space boundaries Granice przestrzeni - + Error: Unable to modify the base object of this wall Błąd: Nie można zmodyfikować obiektu podstawowego tej ściany - + Window elements Elementy okna @@ -2749,7 +2774,7 @@ Tworzenie Budynku zostało przerwane. Wszystko w porządku! Nie znaleziono żadnych problemów - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Obiekt nie posiada atrybutu ifcWłaściwości. Anuluj tworzenie arkusza kalkulacyjnego dla obiektu: @@ -2932,47 +2957,47 @@ Tworzenie Piętra zostało przerwane. Brak arkusza kalkulacyjnego dołączonego do tego harmonogramu - + Section plane settings Ustawienia płaszczyzny przekroju - + Objects seen by this section plane: Obiekty widoczene w tej płaszczyźnie przekroju: - + Section plane placement: Umiejscowienie płaszczyzny przekroju: - + Rotate X Obróć X - + Rotate Y Obróć Y - + Rotate Z Obróć Z - + Resize Zmień rozmiar - + Center Środek - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2983,77 +3008,77 @@ Inne obiekty zostaną usunięte z zaznaczenia. Możesz to zmienić w preferencjach. - + Choose another Structure object: Wybierz inny obiekt Konstrukcji: - + The chosen object is not a Structure Wybrany obiekt nie jest Konstrukcją - + The chosen object has no structural nodes Wybrany obiekt nie posiada węzłów konstrukcyjnych - + One of these objects has more than 2 nodes Jeden z tych obiektów ma więcej niż 2 węzły - + Unable to find a suitable intersection point Nie można znaleźć odpowiedniego punktu przecięcia - + Intersection found. Znaleziono przecięcie. - + The selected wall contains no subwall to merge Wybrana płaszczyzna nie zawiera podpłaszczyzny do scalenia - + Cannot compute blocks for wall Nie można obliczyć bloków dla płaszczyzny - + Choose a face on an existing object or select a preset Wybierz płaszczyznę na istniejącym obiekcie albo wybierz ustawienie wstępne - + Unable to create component Nie można utworzyć komponentu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numer drutu definiującego otwór w obiekcie obsługującym. Wartość zero automatycznie przyjmie największy drut - + + default + domyślny - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. nie znaleziono pycollada, obsługa collada jest wyłączona. @@ -3093,7 +3118,7 @@ Możesz to zmienić w preferencjach. Błąd: Używana wersja IfcOtwartySystem jest za stara - + Successfully written Zapisano pomyślnie @@ -3103,7 +3128,7 @@ Możesz to zmienić w preferencjach. Znaleziono kształt zawierający krzywe, następuje triangulacja - + Successfully imported Pomyślnie importowano @@ -3119,45 +3144,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Dodaj wybrane - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Lewa + + + + Right + Prawo + + + + Use sketches + Użyj rysunki + + + + Structure + Konstrukcja + + + + Window + Okno + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3370,21 +3510,16 @@ You can change that in the preferences. Checks the selected objects for problems Sprawdza zaznaczone obiekty czy nie zawierają błędów - - - Explore the contents of an IFC file - Przeglądaj zawartość pliku IFC - Arch_CloneComponent - + Clone component Komponent klonu - + Clones an object as an undefined architectural component Klonuje obiekt jako niezdefiniowany komponent architektoniczny @@ -3405,12 +3540,12 @@ You can change that in the preferences. Arch_Component - + Component Komponent - + Creates an undefined architectural component Tworzy niezdefiniowany komponent architektoniczny @@ -3444,12 +3579,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3543,23 +3678,15 @@ You can change that in the preferences. Wskaźniki powierzchni do ukrycia - - Arch_IfcExplorer - - - Ifc Explorer - Eksplorator Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Stwórz arkusz IFC... - + Creates a spreadsheet to store IFC properties of an object. Tworzy arkusz do przechowywania właściwości Ifc obiektu. @@ -3588,12 +3715,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Scal ściany - + Merges the selected walls, if possible Połącz wybrane ściany, jeśli możliwe @@ -3799,12 +3926,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Płaszczyzna przekroju - + Creates a section plane object, including the selected objects Tworzy obiekt płaszczyzny przekroju, łącznie z wybranymi obiektami @@ -3825,12 +3952,12 @@ You can change that in the preferences. Arch_Site - + Site Teren - + Creates a site object including selected objects. Tworzy obiekt Teren wraz z wybranymi obiektami @@ -3877,12 +4004,12 @@ You can change that in the preferences. Arch_Structure - + Structure Konstrukcja - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Utwórz obiekt Konstrukcja od początku lub z wybranych obiektów (szkic, szkielet, fasetka lub solid) @@ -3890,12 +4017,12 @@ You can change that in the preferences. Arch_Survey - + Survey Badanie - + Starts survey Rozpoczyna badanie @@ -3903,12 +4030,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Przełącz znacznik IFC Brep - + Force an object to be exported as Brep or not Wymuś eksport obiektu jako Brep lub nie @@ -3916,12 +4043,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Podskładniki przełączania - + Shows or hides the subcomponents of this object Wyświetla lub ukrywa podkomponenty tego obiektu @@ -3942,12 +4069,12 @@ You can change that in the preferences. Arch_Window - + Window Okno - + Creates a window object from a selected object (wire, rectangle or sketch) Tworzy obiekt okno z zaznaczonego obiektu (przewód, prostokąt lub szkic) @@ -4218,7 +4345,7 @@ You can change that in the preferences. Draft - + Writing camera position Pozycja kamery pisania @@ -4654,7 +4781,7 @@ You can change that in the preferences. Przezroczystość: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Niektóre przeglądarki IFC nie lubią obiektów eksportowanych jako wyciągnięcia. Użyj tego aby zmusić obiekty aby były eksportowane jako geometria BREP. @@ -4694,7 +4821,7 @@ You can change that in the preferences. Grubość - + Force export as Brep Wymuszony eksport jako Brep @@ -4724,7 +4851,7 @@ You can change that in the preferences. DAE - + Export options Opcje eksportu @@ -4934,22 +5061,22 @@ You can change that in the preferences. Pozwól na czworokąty - + Use triangulation options set in the DAE options page Pozwól na użycie opcji triangulacji na stronie DAE - + Use DAE triangulation options Użyj opcji triangulacji DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Zakrzywione kształty, które nie mogą zostać pokazane jako krzywe w IFC są rozłożone jako płaskie ścianki. Jeśli ta opcja jest wybrana, pewne dodatkowe kalkulacje są wykonane aby połączyć współpłaszczyznowe elementy. - + Join coplanar facets when triangulating Połącz współpłaszczyznowe przy triangulacji @@ -4989,12 +5116,12 @@ You can change that in the preferences. Import Ifc właściwości w arkuszu kalkulacyjnym - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Podczas eksportowania obiektów bez identyfikatora UID, wygenerowany UID będzie przechowywany w obiekcie FreeCAD do ponownego użycia obiektu, aby zapewnić mniejsze różnice pomiędzy wersjami - + Store IFC universal ID in FreeCAD objects Przechowuj uniwersalny identyfikator IFC w obiektach FreeCAD @@ -5064,17 +5191,17 @@ You can change that in the preferences. Podziel ściany wielowarstwowe - + Warning, experimental feature! Ostrzeżenie, eksperymentalna funkcja! - + Use IfcOpenShell serializer if available Użyć serializatora IfcOtwartSystem, jeśli jest dostępny - + Export 2D objects as IfcAnnotations Eksportuj obiekty 2D jako IfcAdnotacje @@ -5099,12 +5226,12 @@ You can change that in the preferences. Dopasuj widok podczas importowania - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Jeśli to zaznaczone, wszystkie właściwości obiektu FreeCAD zostaną zapisane wewnątrz eksportowanych obiektów, co umożliwi odtworzenie pełnego modelu parametrycznego na reimporcie. - + Export full FreeCAD parametric model Wyeksportuj pełny model parametryczny FreeCAD @@ -5159,22 +5286,22 @@ You can change that in the preferences. Pomiń listę: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Wykorzystaj ponownie podobne jednostki - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Wyłącz IfcRectangleProfileDef @@ -5239,14 +5366,49 @@ You can change that in the preferences. Kolor linii - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm index 4a3d968ce2..ed1705079d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 0c749dbdd8..ab1d26cf97 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -44,12 +44,12 @@ O objeto que este componente está clonando - + Other shapes that are appended to this object Outras formas que são acrescentadas a este objeto - + Other shapes that are subtracted from this object Outras formas que são subtraídas deste objeto @@ -79,7 +79,7 @@ A área de todas as faces verticais deste objeto - + The area of the projection of this object onto the XY plane A área da projeção deste objeto no plano XY @@ -114,7 +114,7 @@ A área deste piso calculada - + The placement of this object O localizador deste objeto @@ -144,12 +144,12 @@ A rotação do perfil em torno de seu eixo de extrusão - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado em um perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado em um perfil @@ -194,22 +194,22 @@ A área deste painel - + The facemaker type to use to build the profile of this object O tipo de facemaker a ser usado para construir o perfil deste objeto - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The linked object O objeto vinculado - + The line width of the rendered objects A largura da linha dos objetos renderizadas @@ -349,7 +349,7 @@ A altura deste elemento - + The structural nodes of this element Os nós estruturais deste elemento @@ -614,132 +614,132 @@ A planilha onde o resultado será mostrado - + If false, non-solids will be cut too, with possible wrong results. Se falso, objetos não-sólidos também serão cortados, com possíveis resultados errados. - + The display length of this section plane O comprimento da representação 3D deste plano de corte - + The display height of this section plane A altura da representação 3D deste plano de corte - + The size of the arrows of this section plane O tamanho das setas deste plano de corte - + Show the cut in the 3D view Mostrar o corte na vista 3D - + The rendering mode to use O modo de renderização a ser usado - + If cut geometry is shown or not Se a geometria cortada é mostrada ou não - + If cut geometry is filled or not Se a geometria cortada é preenchida ou não - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Se esta casa estiver marcada, objetos fonte serão exibidos mesmo se estão invisíveis na vista 3D - + The base terrain of this site O terreno de base deste sítio - + The postal or zip code of this site O código postal deste sítio - + The city of this site A cidade deste terreno - + The country of this site O país deste terreno - + The latitude of this site A latitude deste terreno - + Angle between the true North and the North direction in this document Ângulo entre o norte verdadeiro e a direção do norte neste documento - + The elevation of level 0 of this site A elevação do nível 0 deste terreno - + The perimeter length of this terrain O comprimento do perímetro deste terreno - + The volume of earth to be added to this terrain O volume de terra a ser adicionado a este terreno - + The volume of earth to be removed from this terrain O volume de terra a ser retirado deste terreno - + An extrusion vector to use when performing boolean operations Um vetor de extrusão usado para operações booleanas - + Remove splitters from the resulting shape Retira as arestas divisoras da forma final - + Show solar diagram or not Mostrar o diagrama solar ou não - + The scale of the solar diagram A escala do diagrama solar - + The position of the solar diagram A posição do diagrama solar - + The color of the solar diagram A cor do diagrama solar @@ -785,81 +785,76 @@ - A zone this space is part of - Uma zona da qual este espaço faz parte - - - The number of people who typically occupy this space O número de pessoas que normalmente ocupam este espaço - + The electric power needed to light this space in Watts A energia elétrica necessária para iluminar este espaço em Watts - + The electric power needed by the equipment of this space in Watts A energia elétrica necessária para os equipamentos deste espaço, em Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Se verdadeiro, a propriedade Equipment Power será automaticamente preenchida pelos equipamentos incluídos nesse espaço - + The type of air conditioning of this space O tipo de ar condicionado deste espaço - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data O texto a ser exibido. Use $area, $label, $tag, $floor, $walls, $ceiling para inserir os respectivos dados - + The name of the font O nome da fonte - + The color of the area text A cor do texto da área - + The size of the text font O tamanho da fonte do texto - + The size of the first line of text O tamanho da primeira linha de texto - + The space between the lines of text O espaço entre as linhas de texto - + The position of the text. Leave (0,0,0) for automatic position A posição do texto. Deixe (0, 0,0) para posição automática - + The justification of the text A justificação do texto - + The number of decimals to use for calculated texts O número de casas decimais a serem usadas para textos calculados - + Show the unit suffix Mostrar o sufixo de unidade @@ -939,102 +934,102 @@ O espaço entre a borda da escada e a estrutura - + An optional extrusion path for this element Um caminho de extrusão opcional para este elemento - + The height or extrusion depth of this element. Keep 0 for automatic A profundidade ou altura ou extrusão deste elemento. Mantenha 0 para automático - + A description of the standard profile this element is based upon Uma descrição do perfil padrão no qual este elemento é baseado - + Offset distance between the centerline and the nodes line A distância o eixo central e a linha de nós - + If the nodes are visible or not Se os nós estão visíveis ou não - + The width of the nodes line A largura da linha de nós - + The size of the node points O tamanho dos pontos de nó - + The color of the nodes line A cor da linha de nós - + The type of structural node O tipo de nó estrutural - + Axes systems this structure is built on Sistemas de eixos sobre os quais esta estrutura é construída - + The element numbers to exclude when this structure is based on axes Os números dos elementos a excluir quando essa estrutura for baseada em eixos - + If true the element are aligned with axes Se verdadeiro, os elementos estarão alinhados com os eixos - + The length of this wall. Not used if this wall is based on an underlying object O comprimento desta parede. Não é usado se esta parede for baseada em um objeto subjacente - + The width of this wall. Not used if this wall is based on a face A largura desta parede. Não é utilizada se a parede for baseada numa face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid A altura desta parede. Mantenha 0 para automático. Não é utilizada se a parede for baseada em um sólido - + The alignment of this wall on its base object, if applicable O alinhamento desta parede em seu objeto base, se tiver - + The face number of the base object used to build this wall O número da face do objeto de base a ser usada para construir o telhado - + The offset between this wall and its baseline (only for left and right alignments) A distância entre a parede e sua linha de base (somente para alinhamentos esquerdo e direito) - + The normal direction of this window A direção normal desta janela - + The area of this window A área desta janela @@ -1049,7 +1044,7 @@ Um localizador adicional opcional a ser adicionado ao perfil antes de extrudá-lo - + Opens the subcomponents that have a hinge defined Abre os subcomponentes que têm uma dobradiça definida @@ -1089,12 +1084,12 @@ A lista de espessuras das camadas - + The line color of the projected objects A cor da linha dos objetos projetados - + The color of the cut faces (if turned on) A cor das faces cortadas (se ativado) @@ -1104,7 +1099,7 @@ A distância das longarinas acima da base do degrau - + The number of the wire that defines the hole. A value of 0 means automatic O número do arame que define o furo. Um valor de 0 significa automática @@ -1194,7 +1189,7 @@ O espaçamento personalizado da ferragem - + Shape of rebar Forma da ferragem @@ -1204,17 +1199,17 @@ Inverter a direção do telhado se está indo na direção errada - + Shows plan opening symbols if available Mostra símbolos de abertura em planta se disponível - + Show elevation opening symbols if available Mostra símbolos de abertura em elevação se disponível - + The objects that host this window Os objetos que incluem esta janela @@ -1269,12 +1264,12 @@ O nível do ponto (0,0,0) deste nível - + The shape of this object A forma deste objeto - + The line width of this object A largura da linha deste objeto @@ -1414,47 +1409,47 @@ Se verdadeiro, as cores do arquivo vinculado serão mantidas atualizadas - + The objects that must be considered by this section plane. Empty means the whole document. Os objetos que devem ser considerados por este plano de corte. Vazio significa: todos os objetos do documento. - + The transparency of this object A transparência deste objeto - + The color of this object A cor deste objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distância entre o plano de corte e o corte real da vista (mantenha este valor muito pequeno, mas não zero) - + The street and house number of this site, with postal box or apartment number if needed A rua e número de casa deste site, com número de apartamento ou caixa postal se necessário - + The region, province or county of this site A região, província ou distrito deste site - + A url that shows this site in a mapping website Uma url que mostra este site em um site de mapeamento - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Um deslocamento opcional entre a origem do modelo (0,0,0) e o ponto indicado pelas coordenadas geográficas - + Specifies if this space is internal or external Especifica se este espaço é interno ou externo @@ -1504,200 +1499,230 @@ O contorno esquerdo de todos os lances da escada - + Enable this to make the wall generate blocks Habilite isso para fazer a parede gerar blocos - + The length of each block O comprimento de cada bloco - + The height of each block A altura de cada bloco - + The horizontal offset of the first line of blocks O deslocamento horizontal da primeira linha de bloco - + The horizontal offset of the second line of blocks O deslocamento horizontal da segunda linha de bloco - + The size of the joints between each block O tamanho das juntas de cada bloco - + The number of entire blocks O número de blocos inteiros - + The number of broken blocks O número de blocos quebrados - + The components of this window Os componentes desta janela - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. A profundidade do furo que essa janela faz em seu objeto host. Se 0, o valor será calculado automaticamente. - + An optional object that defines a volume to be subtracted from hosts of this window Um objeto opcional que define um volume a ser subtraído dos hosts dessa janela - + The width of this window A largura desta janela - + The height of this window A altura desta janela - + The preset number this window is based on O número predefinido desta janela é baseado - + The frame size of this window O tamanho do quadro da janela - + The offset size of this window O deslocamento desta janela - + The width of louvre elements A largura dos elementos da veneziana - + The space between louvre elements O espaço entre os elementos da veneziana - + The number of the wire that defines the hole. If 0, the value will be calculated automatically O número do arame que define o furo. Um valor de 0 significa automático Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Especifica se movendo este objeto, é sua base que se move A single section of the fence - A single section of the fence + Uma única seção da cerca A single fence post - A single fence post + Um único post de cerco The Path the fence should follow - The Path the fence should follow + O caminho que a cerca deve seguir The number of sections the fence is built of - The number of sections the fence is built of + O número de seções que a cerca é construída The number of posts used to build the fence - The number of posts used to build the fence + O número de postagens usadas para construir a cerca - + The type of this object - The type of this object + O tipo deste objeto IFC data - IFC data + Dados IFC IFC properties of this object - IFC properties of this object + Propriedades IFC deste objeto - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Descrição dos atributos IFC ainda não estão implementados + + + + If True, resulting views will be clipped to the section plane area. + Se Verdadeiro, resultados da Visualização serão recortados para o plano de área de seção. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Se verdadeiro, a cor do material dos objetos será usada para preencher áreas de corte. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Quando definido como 'Norte Verdadeiro', toda a geometria será girada para coincidir com o verdadeiro norte deste site - + + Show compass or not + Mostrar bússola ou não + + + + The rotation of the Compass relative to the Site + A rotação da Bússola relativa ao Site + + + + The position of the Compass relative to the Site placement + A posição da Bússola relativa à colocação do site + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Atualizar o valor Declinação baseado na rotação do compasso The thickness of the risers - The thickness of the risers + Espessura dos degraus The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + O contorno de todos os lances de escadas + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Componentes @@ -1717,12 +1742,12 @@ Criar eixo - + Remove Remover - + Add Adicionar @@ -1832,87 +1857,87 @@ Vista de - + Create Section Plane Criar um plano de corte - + Create Site Criar sítio - + Create Structure Criar estrutura - + Create Wall Criar parede - + Width Largura - + Height Altura - + Error: Invalid base object Erro: Objeto base inválido - + This mesh is an invalid solid Esta malha não é um sólido válido - + Create Window Criar uma janela - + Edit Editar - + Create/update component Criar/atualizar um componente - + Base 2D object Objeto base 2D - + Wires Arames - + Create new component Criar um novo componente - + Name Nome - + Type Tipo - + Thickness Espessura @@ -1922,7 +1947,7 @@ Erro: Não foi possível determinar a codificação de caracteres - + file %s successfully created. O arquivo %s foi criado com sucesso. @@ -1972,32 +1997,32 @@ Criar Escada - + Length Comprimento - + Error: The base shape couldn't be extruded along this tool object Erro: A forma de base não pode ser extrudada ao longo deste objeto - + Couldn't compute a shape Não foi possível calcular uma forma - + Merge Wall Mesclar uma parede - + Please select only wall objects Por favor, selecione apenas objetos de parede - + Merge Walls Mesclar paredes @@ -2012,7 +2037,7 @@ Não foi possível computar a forma do objeto - + Create Structural System Criar sistema estrutural @@ -2172,7 +2197,7 @@ Se comprimento = 0, então o comprimento é calculado para que a altura seja a m Altura (mm) - + Create Component Criar Componente @@ -2187,17 +2212,17 @@ Se comprimento = 0, então o comprimento é calculado para que a altura seja a m Paredes só podem basear-se em objetos de malha ou parte (peça) - + Set text position Definir a posição do texto - + Category Categoria - + Key Chave @@ -2207,12 +2232,12 @@ Se comprimento = 0, então o comprimento é calculado para que a altura seja a m Valor - + Unit Unidade - + Create IFC properties spreadsheet Criar planilhas para propriedades IFC @@ -2242,7 +2267,7 @@ Se comprimento = 0, então o comprimento é calculado para que a altura seja a m Criar folha de corte - + Facemaker returned an error O FaceMaker retornou um erro @@ -2267,137 +2292,137 @@ Se comprimento = 0, então o comprimento é calculado para que a altura seja a m Criar conector - + Precast elements Elementos pré-moldados - + Slab type Tipo de laje - + Chamfer Chanfro - + Dent length Comprimento do dente - + Dent width Largura do dente - + Dent height Altura do dente - + Slab base Base da laje - + Number of holes Número de furos - + Major diameter of holes Diâmetro maior dos furos - + Minor diameter of holes Diâmetro menos dos furos - + Spacing between holes Espaçamento entre os furos - + Number of grooves Número de sulcos - + Depth of grooves Profundidade dos sulcos - + Height of grooves Altura dos sulcos - + Spacing between grooves Espaçamento entre os sulcos - + Number of risers Número de espelhos - + Length of down floor Comprimento do patamar inferior - + Height of risers Altura dos espelhos - + Depth of treads Profundidade dos degraus - + Precast options Opções de pré-moldados - + Dents list Lista dos dentes - + Add dent Acrescentar dente - + Remove dent Remover dente - + Slant Inclinação - + Level Nível - + Rotation Rotação - + Offset Deslocamento @@ -2422,59 +2447,59 @@ Se comprimento = 0, então o comprimento é calculado para que a altura seja a m Quantitativo - + There is no valid object in the selection. Site creation aborted. Não há nenhum objeto válido na seleção. Criação de Sítio abortada. - + Node Tools Ferramentas de nó - + Reset nodes Reiniciar os nós - + Edit nodes Editar nós - + Extend nodes Estender os nós - + Extends the nodes of this element to reach the nodes of another element Estende os nós deste elemento até os nós de um outro elemento - + Connect nodes Conectar nós - + Connects nodes of this element with the nodes of another element Conecta os nós deste elemento com os nós de um outro elemento - + Toggle all nodes Ligar/Desligar todos os nós - + Toggles all structural nodes of the document on/off Liga/desliga todos os nós estruturais do documento - + Intersection found. Interseção encontrada. @@ -2486,22 +2511,22 @@ Criação de Sítio abortada. Porta - + Hinge Dobradiça - + Opening mode Modo de abertura - + Get selected edge Usar a aresta selecionada - + Press to retrieve the selected edge Pressione para usar a aresta selecionada @@ -2531,17 +2556,17 @@ Criação de Sítio abortada. Nova Camada - + Wall Presets... Predefinições de parede... - + Hole wire Arame para o furo - + Pick selected Usar seleção @@ -2626,17 +2651,17 @@ Criação de Sítio abortada. Este objeto não possui faces - + Space boundaries Limites do espaço - + Error: Unable to modify the base object of this wall Erro: Não foi possível modificar o objeto base desta parede - + Window elements Elementos da janela @@ -2748,7 +2773,7 @@ Criação de edifício abortada. Está tudo bem! nenhum problema foi encontrado - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: O objeto não tem o atributo IfcProperties. Cancelar criação de planilha para o objeto: @@ -2813,10 +2838,7 @@ Criação de edifício abortada. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Em um objeto do tipo Pavimento, você pode colocar qualquer objeto, exceto: Sítio, Edificação e Pavimento. Objetos destes tipos serão removidos da seleção. Você pode mudar isso nas preferências. @@ -2930,47 +2952,47 @@ Floor creation aborted. Nenhuma planilha anexada a este quantitativo - + Section plane settings Configurações do plano de corte - + Objects seen by this section plane: Objetos vistos por este plano de corte: - + Section plane placement: Localizador deste plano de corte: - + Rotate X Rotação X - + Rotate Y Rotação Y - + Rotate Z Rotação Z - + Resize Redimensionar - + Center Centro - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2978,77 +3000,77 @@ Note: You can change that in the preferences. Por favor, selecione apenas objetos edifício ou nada! Sítio não aceita objetos que não sejam edifícios. Outros objetos serão removidos da seleção. Você pode alterar isto nas preferências. - + Choose another Structure object: Escolha outro objeto de estrutura: - + The chosen object is not a Structure O objeto escolhido não é uma estrutura - + The chosen object has no structural nodes O objeto escolhido não tem nenhum nó estrutural - + One of these objects has more than 2 nodes Um desses objetos tem mais de 2 nós - + Unable to find a suitable intersection point Não foi possível encontrar um ponto de intersecção adequado - + Intersection found. Interseção encontrada. - + The selected wall contains no subwall to merge A parede selecionada não contém nenhum subparede para mesclar - + Cannot compute blocks for wall Não e possível calcular blocos para esta parede - + Choose a face on an existing object or select a preset Selecione uma face em um objeto existente ou escolha uma predefinição - + Unable to create component Não é possível criar um componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número do arame que define um furo no objeto. Um valor de zero selecionará automaticamente o arame maior - + + default + padrão - + If this is checked, the default Frame value of this window will be added to the value entered here Se isto estiver marcado, o valor padrão do quadro desta janela será adicionado ao valor inserido aqui - + If this is checked, the default Offset value of this window will be added to the value entered here Se isto estiver marcado, o valor de deslocamento padrão do quadro desta janela será adicionado ao valor inserido aqui - + pycollada not found, collada support is disabled. pycollada não foi encontrado, o suporte ao formato collada está desativado. @@ -3088,7 +3110,7 @@ Note: You can change that in the preferences. Erro: a sua versão de IfcOpenShell é muito antiga - + Successfully written Gravado com sucesso @@ -3098,7 +3120,7 @@ Note: You can change that in the preferences. Uma forma contendo curvas foi encontrada e será triangulada - + Successfully imported Importado com sucesso @@ -3108,50 +3130,162 @@ Note: You can change that in the preferences. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Em um objeto do tipo Edificação, você pode colocar qualquer objeto, exceto: Sítio, Edificação. Objetos destes tipos serão removidos da seleção. Você pode mudar isso nas preferências. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Remover objetos destacados da lista acima - + Add selected Adicionar selecionados - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Adicionar objeto(s) selecionado(s) ao escopo deste plano de secção + + + + Rotates the plane along the X axis + Rotacionar o plano ao longo do eixo X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Rotacionar o plano ao longo do eixo Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Rotacionar o plano ao longo do eixo Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Redimensiona o plano para que os objetos da lista acima caibam - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Centraliza o plano na lista de objetos acima - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Primeiro ponto da viga + + + + Base point of column + Ponto base da coluna + + + + Next point + Ponto seguinte + + + + Structure options + Opções de estruturas + + + + Drawing mode + Modo de desenho + + + + Beam + Viga + + + + Column + Coluna + + + + Preset + Predefinido + + + + Switch L/H + Trocar L/H + + + + Switch L/W + Trocar L/W + + + + Con&tinue + Con&tinuar + + + + First point of wall + Primeiro ponto da parede + + + + Wall options + Opções de parede + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Esta lista mostra todos os objetos multi-materiais deste documento. Crie um novo para definir tipos de paredes. + + + + Alignment + Alinhamento + + + + Left + Esquerda + + + + Right + Direito + + + + Use sketches + Usar esboços + + + + Structure + Estrutura + + + + Window + Janela + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3365,21 +3499,16 @@ You can change that in the preferences. Checks the selected objects for problems Verifica problemas nos objetos selecionados - - - Explore the contents of an IFC file - Explorar o conteúdo de um arquivo IFC - Arch_CloneComponent - + Clone component Clonar componente - + Clones an object as an undefined architectural component Cria um componente arquitetônico indefinido @@ -3400,12 +3529,12 @@ You can change that in the preferences. Arch_Component - + Component Componente - + Creates an undefined architectural component Cria um componente arquitetônico indefinido @@ -3439,14 +3568,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Cerca - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Cria um objeto tipo Cerca a partir da seção, caminho e suporte selecionados @@ -3538,23 +3667,15 @@ You can change that in the preferences. Os índices das faces que devem ser escondidas - - Arch_IfcExplorer - - - Ifc Explorer - Explorador Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Criar planilha IFC... - + Creates a spreadsheet to store IFC properties of an object. Cria uma planilha para armazenar as propriedades IFC de um objeto. @@ -3583,12 +3704,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Mesclar paredes - + Merges the selected walls, if possible Mescla as paredes selecionadas, se possível @@ -3794,12 +3915,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Cria um plano de corte, incluindo os objetos selecionados @@ -3820,12 +3941,12 @@ You can change that in the preferences. Arch_Site - + Site Sítio - + Creates a site object including selected objects. Cria um objeto de local incluindo os objetos selecionados. @@ -3872,12 +3993,12 @@ You can change that in the preferences. Arch_Structure - + Structure Estrutura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Cria um objeto estrutural a partir do zero ou de um objeto selecionado (esboço, arame, face ou sólido) @@ -3885,12 +4006,12 @@ You can change that in the preferences. Arch_Survey - + Survey Quantitativo - + Starts survey Inicia o modo quantitativo @@ -3898,12 +4019,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Troca modo Brep - + Force an object to be exported as Brep or not Força ou não um objeto a ser exportado como Brep no formato IFC @@ -3911,12 +4032,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Alternar sucomponentes - + Shows or hides the subcomponents of this object Mostra ou oculta os subcomponentes do objeto @@ -3937,12 +4058,12 @@ You can change that in the preferences. Arch_Window - + Window Janela - + Creates a window object from a selected object (wire, rectangle or sketch) Cria uma janela a partir de um objeto selecionado (arame, retângulo ou esboço) @@ -4213,7 +4334,7 @@ You can change that in the preferences. Draft - + Writing camera position Gravando posição da câmera @@ -4649,7 +4770,7 @@ You can change that in the preferences. Transparência: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Alguns aplicativos IFC não gostam de objetos exportados como extrusões. Use isso para forçar todos os objetos a serem exportados como geometria BREP. @@ -4689,7 +4810,7 @@ You can change that in the preferences. Espessura - + Force export as Brep Forçar exportação como Brep @@ -4719,7 +4840,7 @@ You can change that in the preferences. DAE - + Export options Opções de Exportação @@ -4929,22 +5050,22 @@ You can change that in the preferences. Permitir quadriláteros - + Use triangulation options set in the DAE options page Usar opções de triangulação definidas na página de opções do formato DAE - + Use DAE triangulation options Usar opções de triangulação DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Formas curvas que não podem ser representadas como curvas no formato IFC são decompostas em facetas planas. Se esta opção for marcada, um cálculo adicional será feito para juntar as facetas coplanares. - + Join coplanar facets when triangulating Juntar facetas coplanares quando for triangular @@ -4984,12 +5105,12 @@ You can change that in the preferences. Importar as propriedades Ifc em uma planilha - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Quando objetos sem UID são exportados, será gerada uma UID nova, que será armazenada no objeto para reuso na próxima vez que o arquivo será exportado, o que gera diffs menores - + Store IFC universal ID in FreeCAD objects Armazenar UID nos objetos do FreeCAD @@ -5059,17 +5180,17 @@ You can change that in the preferences. Separar paredes multicamadas - + Warning, experimental feature! Cuidado, funcionalidade experimental! - + Use IfcOpenShell serializer if available Usar o serializer do IfcOpenShell se disponível - + Export 2D objects as IfcAnnotations Exportar objetos 2D como IfcAnnotations @@ -5094,12 +5215,12 @@ You can change that in the preferences. Requadrar a vista ao importar - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Se isto estiver marcado, todas as propriedades de objeto de FreeCAD serão armazenadas dentro os objetos exportados, permitindo recriar um modelo paramétrico completo na reimportação. - + Export full FreeCAD parametric model Exportar o modelo paramétrico completo do FreeCAD @@ -5154,59 +5275,59 @@ You can change that in the preferences. Lista de exclusão: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Se isto estiver marcado, quando possível, entidades similares serão escritas somente uma vez no arquivo. Isto pode reduzir muito o tamanho do arquivo, mas torna ele menos legível para humanos - + Reuse similar entities Reusar entidades similares - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Quando possível, objetos IFC que são retângulos extrudados são exportados como IfcRectangleProfileDef. No entanto, alguns outros aplicativos notoriamente têm problemas para importar essa entidade. Se este for o seu caso, você pode desabilitar isso aqui (todos os perfis serão exportados como IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Desativar IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Define a propriedade "Mova base" como Verdadeiro por padrão IFC version - IFC version + Versão IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + A versão IFC irá mudar quais atributos e produtos são suportados IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Espaços Line style: - Line style: + Estilo de linha: @@ -5216,17 +5337,17 @@ You can change that in the preferences. Dashed - Dashed + Tracejado Dotted - Dotted + Pontilhado Dashdot - Dashdot + Traço Ponto @@ -5234,14 +5355,49 @@ You can change that in the preferences. Cor da linha - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Alguns tipos IFC como IfcWall ou IfcBeam têm versões padrão especiais como IfcWallStandardCase ou IfcBeamStandardCase. Se esta opção for ativada, o FreeCAD exportará automaticamente tais objetos como casos padrão quando as condições necessárias forem cumpridas. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm index c9cc858978..fbfeced9d6 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index f6d9f16612..5e4f8b67f7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -44,12 +44,12 @@ O objeto clonado por este componente - + Other shapes that are appended to this object Outras formas adicionadas a este objeto - + Other shapes that are subtracted from this object Outras formas subtraídas deste objeto @@ -79,7 +79,7 @@ A área de todas as faces verticais deste objeto - + The area of the projection of this object onto the XY plane A área horizontal deste objeto (projetada no plano XY) @@ -114,7 +114,7 @@ A área calculada para este Piso (andar) - + The placement of this object A posição deste objeto @@ -144,12 +144,12 @@ A rotação do perfil em torno de seu eixo de extrusão - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado num perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado num perfil @@ -194,22 +194,22 @@ A área deste painel - + The facemaker type to use to build the profile of this object O tipo de criador de faces (facemaker) a usar para construir o perfil deste objeto - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The linked object O objeto ligado - + The line width of the rendered objects A espessura da linha dos objetos renderizados @@ -349,7 +349,7 @@ A altura deste elemento - + The structural nodes of this element Os nós estruturais deste elemento @@ -614,132 +614,132 @@ Tabela (folha de cálculo) onde o resultado será mostrado - + If false, non-solids will be cut too, with possible wrong results. Se falso, não-sólidos serão também cortados, com possíveis resultados errados. - + The display length of this section plane Comprimento da representação 3D deste plano de corte - + The display height of this section plane Altura da representação 3D deste plano de corte - + The size of the arrows of this section plane Tamanho das setas deste plano de corte - + Show the cut in the 3D view Mostrar o corte na vista 3D - + The rendering mode to use O modo de renderização a ser usado - + If cut geometry is shown or not Se a geometria cortada é mostrada ou não - + If cut geometry is filled or not Se a geometria cortada é preenchida ou não - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Se marcado, objetos são mostrados independente de estarem visível no modelo 3D - + The base terrain of this site O terreno base deste sítio - + The postal or zip code of this site O código postal deste sítio - + The city of this site A cidade deste sítio - + The country of this site O país deste sítio - + The latitude of this site A latitude deste sítio - + Angle between the true North and the North direction in this document Ângulo entre o norte verdadeiro e a direção do norte neste documento - + The elevation of level 0 of this site A elevação do nível 0 (cota de soleira?) deste sítio - + The perimeter length of this terrain O perímetro deste terreno - + The volume of earth to be added to this terrain O volume de aterro a ser adicionado a este terreno - + The volume of earth to be removed from this terrain O volume de desaterro a ser retirado deste terreno - + An extrusion vector to use when performing boolean operations Um vetor de extrusão para usar ao executar operações booleanas - + Remove splitters from the resulting shape Retira as arestas divisoras da forma final - + Show solar diagram or not Mostrar o diagrama solar ou não - + The scale of the solar diagram A escala do diagrama solar - + The position of the solar diagram A posição do diagrama solar - + The color of the solar diagram A cor do diagrama solar @@ -785,81 +785,76 @@ - A zone this space is part of - Uma zona da qual este espaço faz parte - - - The number of people who typically occupy this space O número de pessoas que normalmente ocupam este espaço - + The electric power needed to light this space in Watts A energia elétrica necessária para iluminar este espaço em Watts - + The electric power needed by the equipment of this space in Watts A energia elétrica necessária para os equipamentos deste espaço, em Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Se verdadeiro, a propriedade Potência dos Equipamentos será automaticamente preenchida pelos equipamentos incluídos neste espaço - + The type of air conditioning of this space O tipo de ar condicionado deste espaço - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Texto a ser exibido. Usar $area, $label, $tag, $floor, $walls, $ceiling para inserir os respetivos dados - + The name of the font Nome da fonte - + The color of the area text A cor do texto da área - + The size of the text font O tamanho da fonte do texto - + The size of the first line of text Tamanho da primeira linha do texto - + The space between the lines of text Espaço entre as linhas de texto - + The position of the text. Leave (0,0,0) for automatic position Posição do texto. Deixe (0, 0,0) para posição automática - + The justification of the text Alinhamento do texto - + The number of decimals to use for calculated texts O número de casas decimais a usar nos textos calculados - + Show the unit suffix Mostrar o sufixo de unidade @@ -939,102 +934,102 @@ O afastamento entre a borda da escada e a estrutura - + An optional extrusion path for this element Um caminho opcional de extrusão para este elemento - + The height or extrusion depth of this element. Keep 0 for automatic A altura ou a profundidade da extrusão deste elemento. Manter 0 para automático - + A description of the standard profile this element is based upon Descrição do perfil padrão no qual este elemento se baseia - + Offset distance between the centerline and the nodes line A distância entre o eixo e a linha de nós - + If the nodes are visible or not Se os nós estão visíveis ou não - + The width of the nodes line A largura da linha de nós - + The size of the node points O tamanho dos pontos de nó - + The color of the nodes line A cor da linha de nós - + The type of structural node O tipo de nó estrutural - + Axes systems this structure is built on Sistemas de eixos sobre os quais esta estrutura é construída - + The element numbers to exclude when this structure is based on axes Os números dos elementos a excluir quando esta estrutura for baseada em eixos - + If true the element are aligned with axes Se verdadeiro, os elementos serão alinhados com os eixos - + The length of this wall. Not used if this wall is based on an underlying object Comprimento da parede. Não é usado se a parede for baseada num objeto - + The width of this wall. Not used if this wall is based on a face Largura da parede. Não é usada, se esta parede for baseada numa face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Altura desta parede. Manter 0 para automático. Não usada, se esta parede for baseada num sólido - + The alignment of this wall on its base object, if applicable Alinhamento desta parede relativo ao objeto base, se aplicável - + The face number of the base object used to build this wall O número da face do objeto base usado para construir este telhado - + The offset between this wall and its baseline (only for left and right alignments) Distância entre a parede e sua linha base (apenas para alinhamentos esquerdo e direito) - + The normal direction of this window A direção normal desta janela - + The area of this window A área da janela @@ -1049,7 +1044,7 @@ Uma posição adicional opcional a ser adicionada ao perfil antes de extrudi-lo - + Opens the subcomponents that have a hinge defined Abre os subcomponentes que têm uma dobradiça definida @@ -1089,12 +1084,12 @@ A lista de espessuras das camadas - + The line color of the projected objects A cor da linha dos objetos projetados - + The color of the cut faces (if turned on) A cor das faces cortadas (se ativado) @@ -1104,7 +1099,7 @@ A sobreposição das longarinas (vigas de suporte) acima da base do degrau - + The number of the wire that defines the hole. A value of 0 means automatic O número do traço que define o furo. Um valor de 0 significa automático @@ -1194,7 +1189,7 @@ O espaçamento personalizado da Armadura de reforço - + Shape of rebar Forma da Armadura de reforço @@ -1204,17 +1199,17 @@ Inverter a direção do telhado se for na direção errada - + Shows plan opening symbols if available Mostra símbolos de abertura em planta se disponível - + Show elevation opening symbols if available Mostrar símbolos de abertura em alçado se disponível - + The objects that host this window Os objetos que alojam esta janela @@ -1269,12 +1264,12 @@ A cota do ponto (0,0,0) deste nível - + The shape of this object A forma deste objeto - + The line width of this object A largura da linha deste objeto @@ -1414,47 +1409,47 @@ Se verdadeiro, as cores do arquivo vinculado serão mantidas atualizadas - + The objects that must be considered by this section plane. Empty means the whole document. Os objetos que devem ser considerados por este plano de corte. Vazio significa o documento inteiro. - + The transparency of this object A transparência deste objeto - + The color of this object A cor deste objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distância entre o plano de corte e o corte real da vista (mantenha este valor muito pequeno, mas não zero) - + The street and house number of this site, with postal box or apartment number if needed O número de policia e rua deste sítio, número apartamento ou caixa postal se necessário - + The region, province or county of this site A região, província ou município deste sítio - + A url that shows this site in a mapping website Um url que mostra este sítio num site de mapeamento - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Um deslocamento opcional entre a origem do modelo (0, 0,0) e o ponto indicado pelas coordenadas geográficas - + Specifies if this space is internal or external Especifica se este espaço é interior ou exterior @@ -1504,97 +1499,97 @@ O 'contorno esquerdo' de todos os segmentos de escadas - + Enable this to make the wall generate blocks Ative isto para fazer a parede gerar blocos - + The length of each block O comprimento de cada bloco - + The height of each block A altura de cada bloco - + The horizontal offset of the first line of blocks O deslocamento horizontal da primeira linha de blocos - + The horizontal offset of the second line of blocks O deslocamento horizontal da segunda linha de blocos - + The size of the joints between each block O tamanho das juntas entre cada bloco - + The number of entire blocks O número de blocos inteiros - + The number of broken blocks O número de blocos cortados - + The components of this window Os componentes desta janela - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. A profundidade do buraco que esta janela faz no seu objeto hospedeiro. Se for 0, o valor será calculado automaticamente. - + An optional object that defines a volume to be subtracted from hosts of this window Um objeto opcional que define um volume que será subtraído aos hospedeiros desta janela - + The width of this window A largura desta janela - + The height of this window A altura desta janela - + The preset number this window is based on O número da predefinição na qual esta janela se baseia - + The frame size of this window O tamanho do aro da janela - + The offset size of this window O deslocamento (recuo) desta janela - + The width of louvre elements A espessura dos elementos do estore (gelosia) - + The space between louvre elements O espaço entre as laminas do estore (gelosia) - + The number of the wire that defines the hole. If 0, the value will be calculated automatically O número do traço que define o vão. Se for 0, o valor será calculado automaticamente @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Componentes @@ -1717,12 +1742,12 @@ Criar Eixos - + Remove Remover - + Add Adicionar @@ -1832,87 +1857,87 @@ Vista de - + Create Section Plane Criar Plano de Corte - + Create Site Criar Sítio - + Create Structure Criar Estrutura - + Create Wall Criar Parede - + Width Largura - + Height Altura - + Error: Invalid base object Erro: Objeto de base inválido - + This mesh is an invalid solid Esta malha é um sólido inválido - + Create Window Criar Janela - + Edit Editar - + Create/update component Criar/atualizar componente - + Base 2D object Objeto 2D de Base - + Wires Aramado - + Create new component Criar novo componente - + Name Nome - + Type Tipo - + Thickness Espessura @@ -1922,7 +1947,7 @@ Erro: Não foi possivel determinar a codificação de caracteres - + file %s successfully created. ficheiro %s criado com exito. @@ -1972,32 +1997,32 @@ Criar escadas - + Length Comprimento - + Error: The base shape couldn't be extruded along this tool object Erro: A forma base não pode ser extrudida ao longo deste objeto - + Couldn't compute a shape Não foi possível calcular uma forma - + Merge Wall Unir parede - + Please select only wall objects Por favor, selecione apenas paredes - + Merge Walls Unir paredes @@ -2012,7 +2037,7 @@ Erro ao computar a forma do objeto - + Create Structural System Criar sistema estrutural @@ -2162,7 +2187,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Altura (mm) - + Create Component Criar componente @@ -2177,17 +2202,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Paredes só podem basear-se em objetos de malha ou parte (peça) - + Set text position Definir a posição do texto - + Category Categoria - + Key Chave @@ -2197,12 +2222,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Valor - + Unit Unidade - + Create IFC properties spreadsheet Criar tabela de propriedades IFC @@ -2232,7 +2257,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Criar Chapa de painel - + Facemaker returned an error O criador de faces retornou um erro @@ -2257,137 +2282,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Criar conector - + Precast elements Elementos Pré-fabricados - + Slab type Tipo de laje - + Chamfer Chanfro - + Dent length Comprimento do entalhe - + Dent width Largura do entalhe - + Dent height Altura do entalhe - + Slab base Base da laje - + Number of holes Número de furos - + Major diameter of holes Diâmetro maior dos furos - + Minor diameter of holes Diâmetro menor dos furos - + Spacing between holes Espaçamento entre os furos - + Number of grooves Número de ranhuras - + Depth of grooves Profundidade das ranhuras - + Height of grooves Altura das ranhuras - + Spacing between grooves Espaçamento entre as ranhuras - + Number of risers Número de espelhos - + Length of down floor Comprimento do patamar inferior - + Height of risers Altura dos espelhos - + Depth of treads Profundidade dos degraus - + Precast options Opções de Prefabricados - + Dents list Lista dos entalhes - + Add dent Adicionar entalhe - + Remove dent Remover o entalhe - + Slant Inclinação - + Level Nível - + Rotation Rotação - + Offset Deslocamento paralelo @@ -2412,58 +2437,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Tabela (Lista de quantidades) - + There is no valid object in the selection. Site creation aborted. Não há nenhum objeto válido na seleção. Criação de Sítio abortada. - + Node Tools Ferramentas de nós - + Reset nodes Reiniciar os nós - + Edit nodes Editar nós - + Extend nodes Estender os nós - + Extends the nodes of this element to reach the nodes of another element Estende os nós deste elemento até aos nós de um outro elemento - + Connect nodes Ligar nós - + Connects nodes of this element with the nodes of another element Ligar nós deste elemento com os nós de um outro elemento - + Toggle all nodes Ligar/Desligar todos os nós - + Toggles all structural nodes of the document on/off Liga/desliga todos os nós estruturais do documento - + Intersection found. Interseção encontrada. @@ -2475,22 +2500,22 @@ Site creation aborted. Porta - + Hinge Dobradiça - + Opening mode Modo de abertura - + Get selected edge Usar a aresta selecionada - + Press to retrieve the selected edge Pressione para usar a aresta selecionada @@ -2520,17 +2545,17 @@ Site creation aborted. Nova camada - + Wall Presets... Predefinições de parede... - + Hole wire Contorno do furo - + Pick selected Usar seleção @@ -2615,17 +2640,17 @@ Site creation aborted. Este objeto não possui face - + Space boundaries Limites do espaço - + Error: Unable to modify the base object of this wall Erro: Não foi possível modificar o objeto base desta parede - + Window elements Elementos da janela @@ -2737,7 +2762,7 @@ Criação de edifício abortada. Tudo bem! Não foram encontrados problemas - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: O objeto não tem o atributo IfcProperties. Cancelar criação da Tabela (folha de cálculo) para o objeto: @@ -2919,47 +2944,47 @@ Floor creation aborted. Nenhuma Tabela (folha de cálculo) ligada a esta Lista de quantidades - + Section plane settings Configurações do plano de corte - + Objects seen by this section plane: Objetos vistos por este plano de corte: - + Section plane placement: Posição do plano de corte: - + Rotate X Rodar X - + Rotate Y Rodar Y - + Rotate Z Rodar Z - + Resize Redimensionar - + Center Centro - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2967,77 +2992,77 @@ Note: You can change that in the preferences. Por favor, selecione apenas objetos edifício ou nada! Sítio não aceita objetos diferentes de edifício. Outros objetos serão removidos da seleção. Pode alterar isto nas preferências. - + Choose another Structure object: Escolha outro objeto de estrutura: - + The chosen object is not a Structure O objeto escolhido não é uma estrutura - + The chosen object has no structural nodes O objeto escolhido não tem nenhum nó estrutural - + One of these objects has more than 2 nodes Um desses objetos tem mais de 2 nós - + Unable to find a suitable intersection point Não foi possível encontrar um ponto de intersecção adequado - + Intersection found. Interseção encontrada. - + The selected wall contains no subwall to merge A parede selecionada não contém nenhuma subparede para unir - + Cannot compute blocks for wall Não e possível calcular o numero de cortes de blocos para a parede - + Choose a face on an existing object or select a preset Selecione uma face num objeto existente ou escolha uma predefinição - + Unable to create component Não é possível criar o componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número do traço que define um vão no objeto hospedeiro. Um valor zero assume automaticamente o traço maior - + + default + predefinido - + If this is checked, the default Frame value of this window will be added to the value entered here Se marcado, o valor predefinido do aro desta janela será adicionado ao valor inserido aqui - + If this is checked, the default Offset value of this window will be added to the value entered here Se marcado, o valor de deslocamento (recuo) predefinido desta janela será adicionado ao valor inserido aqui - + pycollada not found, collada support is disabled. pycollada não foi encontrado, o suporte ao formato collada está desativado. @@ -3077,7 +3102,7 @@ Note: You can change that in the preferences. Erro: a sua versão de IfcOpenShell é muito antiga - + Successfully written Gravado com sucesso @@ -3087,7 +3112,7 @@ Note: You can change that in the preferences. Uma forma contendo curvas foi encontrada e será triangulada - + Successfully imported Importado com sucesso @@ -3103,45 +3128,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Adicionar selecionados - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Esquerda + + + + Right + Direita + + + + Use sketches + Usar esboços + + + + Structure + Estrutura + + + + Window + Janela + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3354,21 +3494,16 @@ You can change that in the preferences. Checks the selected objects for problems Verifica os objetos selecionados para ver se existem problemas - - - Explore the contents of an IFC file - Explorar o conteúdo de um ficheiro IFC - Arch_CloneComponent - + Clone component Clonar componente - + Clones an object as an undefined architectural component Cria um componente arquitetónico indefinido @@ -3389,12 +3524,12 @@ You can change that in the preferences. Arch_Component - + Component Componente - + Creates an undefined architectural component Cria um componente arquitectónico indefinido @@ -3428,12 +3563,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3527,23 +3662,15 @@ You can change that in the preferences. Os índices das faces que devem ser escondidas - - Arch_IfcExplorer - - - Ifc Explorer - Explorador Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crie tabela IFC... - + Creates a spreadsheet to store IFC properties of an object. Cria uma Tabela (folha de cálculo) para armazenar as propriedades IFC de um objeto. @@ -3572,12 +3699,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Unir paredes - + Merges the selected walls, if possible Une as paredes selecionadas, se possível @@ -3783,12 +3910,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Cria um plano de corte, incluindo os objetos selecionados @@ -3809,12 +3936,12 @@ You can change that in the preferences. Arch_Site - + Site sítio - + Creates a site object including selected objects. Cria um objeto de sítio, incluindo os objetos selecionados. @@ -3861,12 +3988,12 @@ You can change that in the preferences. Arch_Structure - + Structure Estrutura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Cria um novo objeto de estrutura ou um a partir de um objeto selecionado (esboço, traço, face ou sólido) @@ -3874,12 +4001,12 @@ You can change that in the preferences. Arch_Survey - + Survey Recolha de dados - + Starts survey Iniciar recolha de dados @@ -3887,12 +4014,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Alternar modo Brep - + Force an object to be exported as Brep or not Força um objeto a ser exportado ou não como Brep no formato Ifc @@ -3900,12 +4027,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Alternar sucomponentes - + Shows or hides the subcomponents of this object Mostra ou oculta os subcomponentes do objeto @@ -3926,12 +4053,12 @@ You can change that in the preferences. Arch_Window - + Window Janela - + Creates a window object from a selected object (wire, rectangle or sketch) Cria um objeto janela a partir do objeto selecionado (traço, retângulo ou esboço) @@ -4202,7 +4329,7 @@ You can change that in the preferences. Draft - + Writing camera position Gravar a posição da câmara @@ -4638,7 +4765,7 @@ You can change that in the preferences. Transparência: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Alguns visualizadores de IFC não gostam de objetos exportados como extrusões. Use isto para forçar todos os objetos a serem exportados como geometria BREP. @@ -4678,7 +4805,7 @@ You can change that in the preferences. Espessura - + Force export as Brep Forçar exportação como Brep @@ -4708,7 +4835,7 @@ You can change that in the preferences. DAE - + Export options Opções de Exportação @@ -4918,22 +5045,22 @@ You can change that in the preferences. Permitir quadriláteros - + Use triangulation options set in the DAE options page Usar opções de triangulação definidas na página de opções do formato DAE - + Use DAE triangulation options Usar opções de triangulação DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Formas curvas que não podem ser representadas como curvas no formato IFC são decompostas em faces planas. Se esta opção for marcada, um cálculo adicional será feito para juntar as faces complanares. - + Join coplanar facets when triangulating Juntar faces complanares aquando da triangulação @@ -4973,12 +5100,12 @@ You can change that in the preferences. Importa as propriedades Ifc para uma tabela - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Quando exportar objetos sem UID, o UID gerado será armazenado dentro do objeto FreeCAD para reutilização da próxima vez que objeto for exportado, o que dará menores diferenças entre versões - + Store IFC universal ID in FreeCAD objects Armazenar UID nos objetos do FreeCAD @@ -5048,17 +5175,17 @@ You can change that in the preferences. Separar paredes multicamadas - + Warning, experimental feature! Cuidado, funcionalidade experimental! - + Use IfcOpenShell serializer if available Use o serializador IfcOpenShell se disponível - + Export 2D objects as IfcAnnotations Exportar objetos 2D como IfcAnnotations @@ -5083,12 +5210,12 @@ You can change that in the preferences. Enquadrar a vista ao importar - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Se marcado, todas as propriedades de objeto de FreeCAD serão armazenadas dentro dos objetos exportados, permitindo recriar um modelo paramétrico completo na reimportação. - + Export full FreeCAD parametric model Exportar o modelo paramétrico completo do FreeCAD @@ -5143,22 +5270,22 @@ You can change that in the preferences. Lista de exclusão: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Se marcado, quando possível, entidades similares serão usadas apenas uma vez no ficheiro. Isto pode reduzir muito o tamanho do ficheiro, mas irá torná-lo menos facilmente legível por seres humanos - + Reuse similar entities Reusar entidades similares - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Quando possível, objetos IFC que são retângulos extrudados são exportados como IfcRectangleProfileDef. No entanto, alguns outros aplicativos notoriamente têm problemas para importar essa entidade. Se este for o seu caso, você pode desabilitar isso aqui (todos os perfis serão exportados como IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Desativar IfcRectangleProfileDef @@ -5223,14 +5350,49 @@ You can change that in the preferences. Cor da linha - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.qm b/src/Mod/Arch/Resources/translations/Arch_ro.qm index 6b7847443d..38de676c26 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ro.qm and b/src/Mod/Arch/Resources/translations/Arch_ro.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index 539fa2ad08..a0ba512352 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -44,12 +44,12 @@ Obiectul pe care această componentă îl clonează - + Other shapes that are appended to this object Alte forme care aparțin acestui obiect - + Other shapes that are subtracted from this object Alte forme care sunt eliminate din acest obiect @@ -79,7 +79,7 @@ Aria tuturor fetelor verticale ale acestui obiect - + The area of the projection of this object onto the XY plane Aria proiecției acestui obiect pe planul XY @@ -114,7 +114,7 @@ Aria calculata a acestei podele - + The placement of this object Amplasarea acestui obiect @@ -144,12 +144,12 @@ Rotirea profilului în jurul propriei axe - + The length of this element, if not based on a profile Lungimea acestui element, dacă nu este bazat pe un profil - + The width of this element, if not based on a profile Lățimea acestui element, dacă nu e bazat pe un profil @@ -194,22 +194,22 @@ Aria acestui panou - + The facemaker type to use to build the profile of this object Tipul de facemaker de utilizat pentru a creea profilul acestui obiect - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Direcția normala de extrudare a acestui obiect (păstrează (0,0,0) pentru normare automata) - + The linked object Obiectul corelat - + The line width of the rendered objects Lățimea liniei ale obiectelor redate @@ -349,7 +349,7 @@ Înălțimea acestui element - + The structural nodes of this element Nodurile structurale ale acestui element @@ -614,132 +614,132 @@ Foaia de calcul unde se tipăresc rezultatele - + If false, non-solids will be cut too, with possible wrong results. Dacă valoarea este <<false>>, elementele non solide vor fi de asemenea secționate, posibil să se obțină rezultate imprevizibile. - + The display length of this section plane Lungimea vederii de afișare al acestui plan de secționare - + The display height of this section plane Înălțimea vederii de afișare a acestui plan de secționare - + The size of the arrows of this section plane Dimensiunea săgeţilor acestui plan de secțiune - + Show the cut in the 3D view Arată secțiunea în vizualizarea 3D - + The rendering mode to use Modul de redare de utilizat - + If cut geometry is shown or not Dacă geometria secțiunii este afișată sau nu - + If cut geometry is filled or not Dacă geometria secțiunii este umplută sau nu - + The size of the texts inside this object Dimensiunea textelor în interiorul acestui obiect - + If checked, source objects are displayed regardless of being visible in the 3D model În cazul în care bifat, sursa de obiecte sunt afişată indiferent dacă sunt vizibile sau nu în modelul 3D - + The base terrain of this site Terenul de bază al acestui site - + The postal or zip code of this site Codul poştal de pe acest site - + The city of this site Oraşul acestui site - + The country of this site Țara acestui șantier - + The latitude of this site Latitudinea acestui șantier - + Angle between the true North and the North direction in this document Unghiul dintre nordul adevărat şi direcţia nord în acest document - + The elevation of level 0 of this site Înălțimea parterului pentru aceasta construcție - + The perimeter length of this terrain Perimetrul terenului - + The volume of earth to be added to this terrain Volumul de pământ ce trebuie adăugat pe acest teren - + The volume of earth to be removed from this terrain Volumul de pământ ce trebuie eliminat de pe acest teren - + An extrusion vector to use when performing boolean operations Folosirea unui vector extrudor pentru efectuarea unei operații booleene - + Remove splitters from the resulting shape Eliminarea delimitatoarelor din forma finala - + Show solar diagram or not Arata/ascunde diagrama solara - + The scale of the solar diagram Scala diagramei solare - + The position of the solar diagram Poziția diagramei solare - + The color of the solar diagram Culoarea diagramei solare @@ -785,81 +785,76 @@ - A zone this space is part of - O zona din acest spațiu este parte din - - - The number of people who typically occupy this space Numărul de oameni care de obicei ocupa acest spaţiu - + The electric power needed to light this space in Watts Energia electrica necesara pentru luminarea acestui spațiu în wați - + The electric power needed by the equipment of this space in Watts Energiei electrice necesare de aparatul de acest spaţiu în wați - + If True, Equipment Power will be automatically filled by the equipment included in this space Dacă este adevărat, Equipment Power vor fi completate automat de echipamente incluse în acest spaţiu - + The type of air conditioning of this space Tipul de aer condiţionat din acest spaţiu - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Textul să arate. Utilizaţi $area, $label, $tag, $floor, $walls, $ceiling pentru a insera datele respective - + The name of the font Numele fontului - + The color of the area text Culoarea textului din aria respectiva - + The size of the text font Dimensiunea fontului din text - + The size of the first line of text Dimensiunea a primei linii de text - + The space between the lines of text Spaţiul dintre liniile de text - + The position of the text. Leave (0,0,0) for automatic position Poziția textului. Păstrați (0,0,0) pentru poziționare automata - + The justification of the text Spațierea textului - + The number of decimals to use for calculated texts Numărul de zecimale pentru calculul textelor - + Show the unit suffix Arată sufixul unității folosite @@ -939,102 +934,102 @@ Decalajul între bordura scării şi structură - + An optional extrusion path for this element O cale de extrudare opţională pentru acest element - + The height or extrusion depth of this element. Keep 0 for automatic Înălțimea sau adâncimea de extrudare a acestui element. 0 înseamnă automat - + A description of the standard profile this element is based upon O descriere a profilului standard pe care acest element este bazat - + Offset distance between the centerline and the nodes line Compensează distanța dintre linia centrala/axul şi linia de noduri - + If the nodes are visible or not În cazul în care nodurile sunt vizibile sau nu - + The width of the nodes line Lăţimea liniei de noduri - + The size of the node points Dimensiunea punctelor nod - + The color of the nodes line Culoarea liniei de noduri - + The type of structural node Tipul de nod structurale - + Axes systems this structure is built on Sisteme de axe pe care această structură este construită - + The element numbers to exclude when this structure is based on axes Numerele de element de exclus atunci când această structură se bazează pe axe - + If true the element are aligned with axes Dacă este true, elementul este aliniat cu axele - + The length of this wall. Not used if this wall is based on an underlying object Lungimea acestui perete. Nu se folosește dacă acest perete este bazat pe un obiect subadiacent - + The width of this wall. Not used if this wall is based on a face Lățimea acestui perete. Nu se folosește dacă acest perete este bazat pe o față - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Înălțimea acestui zid. Setează la 0 pentru valoare automată. Nu este folosită dacă acest perete se bazează pe un solid - + The alignment of this wall on its base object, if applicable Alinierea de acest zid pe obiectul său de bază, dacă este cazul - + The face number of the base object used to build this wall Numărul feței obiectului de bază folosit la construirea acestui perete - + The offset between this wall and its baseline (only for left and right alignments) Decalajul între acest perete şi linia sa de bază (numai pentru aliniamente stânga şi la dreapta) - + The normal direction of this window Direcția normală a acestei ferestre - + The area of this window Aria acestei fereastre @@ -1049,7 +1044,7 @@ Un placement additionnel facultatif à ajouter au profil avant de l'extruder - + Opens the subcomponents that have a hinge defined Se deschide subcomponente care au o balama definită @@ -1089,12 +1084,12 @@ Lista de grosimi de strat - + The line color of the projected objects Culoarea obiectelor proiectate - + The color of the cut faces (if turned on) Culoarea tăiate feţele (dacă este activată) @@ -1104,7 +1099,7 @@ Le chevauchement des poutres au-dessus du bas des semelles - + The number of the wire that defines the hole. A value of 0 means automatic Numărul de fire care defineşte gaura. O valoare 0 înseamnă automat @@ -1194,7 +1189,7 @@ Spațiere particularizată de armare - + Shape of rebar Forma armaturii @@ -1204,17 +1199,17 @@ Inverser la direction de toit si elle va dans le mauvais sens - + Shows plan opening symbols if available Affiche les symboles de début du plan si disponible - + Show elevation opening symbols if available Afișează simbolurile de élévation du début du plan dacă sunt disponibile - + The objects that host this window Les objets care suportă această fereaxtră @@ -1269,12 +1264,12 @@ Nivelul punctului (0,0,0) la acest nivel - + The shape of this object Forma acestui obiect - + The line width of this object Lățimea liniei acestui obiect @@ -1414,47 +1409,47 @@ Dacă este adevărat, culorile din fişierul conectat vor fi actualizate - + The objects that must be considered by this section plane. Empty means the whole document. Obiectele care trebuiesc luate în considerare de acest plan de secționare. Gol înseamnă tot documentul. - + The transparency of this object Transparenţa acestui obiect - + The color of this object Culoare acest obiect - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Distanța dintre planul de secțiune și planul actual de vedere (păstrează o valoare foarte mică, dar nu zero) - + The street and house number of this site, with postal box or apartment number if needed Strada și numărul acestui amplasament, cu numărul cutiei poștale sau a apartamentului dacă este necesar - + The region, province or county of this site Regiune, provincie sau judeţ a acestui site - + A url that shows this site in a mapping website O adresă Url ce arată acest teren pe o pagină web topografică - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Un opţional offset între originea model (0,0,0) şi punctul indicat de geocoordonates - + Specifies if this space is internal or external Specifică dacă acest spaţiu este intern sau extern @@ -1504,97 +1499,97 @@ Conturul' stânga' tuturor segmentelor de scari - + Enable this to make the wall generate blocks Permiteți-i să facă pereți din blocuri generate - + The length of each block Lungimea fiecărui bloc - + The height of each block Înălţimea fiecărui bloc - + The horizontal offset of the first line of blocks Deplasare orizontală pentru prima linie de blocuri - + The horizontal offset of the second line of blocks Deplasare orizontală pentru a doua linie de blocuri - + The size of the joints between each block Dimensiunea rosturilor dintre blocuri - + The number of entire blocks Numărul tuturor blocurilor - + The number of broken blocks Numărul de blocuri sparte - + The components of this window Componentele acestei ferestre - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Adâncime gaură pe care o face această fereastră în obiect gazdă. Dacă este 0, valoarea va fi calculată automat. - + An optional object that defines a volume to be subtracted from hosts of this window Un obiect opţional care defineşte Un volum a fi substras pentru a găzdui această fereastră - + The width of this window Lăţimea acestei ferestre - + The height of this window Înălţimea aceastei ferestre - + The preset number this window is based on Numărul prestabilit această fereastră se bazează pe - + The frame size of this window Dimensiunea cadrului acestei fereastre - + The offset size of this window Dimensiunea offset acestei ferestre - + The width of louvre elements Lăţimea jaluzelelor - + The space between louvre elements Spatiul dintre jaluzele - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Numărul de fire care defineşte gaura. O valoare 0 înseamnă automat @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Componente @@ -1717,12 +1742,12 @@ Creați axa - + Remove Elimină - + Add Adaugă @@ -1832,87 +1857,87 @@ Vedere a - + Create Section Plane Creare plan de secționare - + Create Site Crează teren - + Create Structure Crează structură - + Create Wall Crează perete - + Width Lăţime - + Height Înălţime - + Error: Invalid base object Eroare: obiect de bază invalid - + This mesh is an invalid solid Aceasta plasă nu este un solid valid - + Create Window Creare fereastră - + Edit Editare - + Create/update component Crează/actualizează componentul - + Base 2D object Obiectul 2D de bază - + Wires Polilinii - + Create new component Crează component nou - + Name Nume - + Type Tip - + Thickness Grosime @@ -1922,7 +1947,7 @@ Eroare: nu pot determina codarea caracterelor - + file %s successfully created. fişierul %s a fost creat cu succes. @@ -1972,32 +1997,32 @@ Crează scări - + Length Lungime - + Error: The base shape couldn't be extruded along this tool object Eroare: Forma de baza nu a putut fi extrudată de-a lungul acestui obiect unealtă - + Couldn't compute a shape Nu s-a putut calcula o formă - + Merge Wall Perete îmbinat - + Please select only wall objects Selectați numai obiectele perete - + Merge Walls Pereți îmbinați @@ -2012,7 +2037,7 @@ Eroare la calcularea formei acestui obiect - + Create Structural System Crează sistem structural @@ -2174,7 +2199,7 @@ Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfe Înălțime (mm) - + Create Component Creare component @@ -2189,17 +2214,17 @@ Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfe Pereții nu pot fi creați decăt cu ajutorul unui obiect tip Piesă sau Plasă - + Set text position Alegeți poziția textului - + Category Categorie - + Key Tastă @@ -2209,12 +2234,12 @@ Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfe Valoare - + Unit Unitate - + Create IFC properties spreadsheet Création d'une feuille de calcul de propriétés Ifc @@ -2244,7 +2269,7 @@ Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfe Creează Panel Sheet - + Facemaker returned an error FaceMaker a întors o eroare @@ -2269,137 +2294,137 @@ Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfe Creaţi conector - + Precast elements Elemente prefabricate - + Slab type Tip placa - + Chamfer Teşitură - + Dent length Lungimea intarsiei - + Dent width Lățimea intarsiei - + Dent height Înălțimea intarsiei - + Slab base Dalle de bază - + Number of holes Numărul de găuri - + Major diameter of holes Diametrul maxim al găurilor - + Minor diameter of holes Diametrul maxim al găurilor - + Spacing between holes Distanța între găuri - + Number of grooves Număr de caneluri - + Depth of grooves Adâncimea canelurilor - + Height of grooves Înălțimea canelurilor - + Spacing between grooves Distanța între caneluri - + Number of risers Numărul de contratrepte - + Length of down floor Lungimea étajului inférieor - + Height of risers Înălțimea contratreptelor - + Depth of treads Adâncimea treptei - + Precast options Opțiuni prefabricat - + Dents list Liste des intarsii - + Add dent Adaugă o intarsie - + Remove dent Enlever une bosse - + Slant Inclinație - + Level Nivel - + Rotation Rotaţie - + Offset Compensare @@ -2424,58 +2449,58 @@ Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfe Planificare - + There is no valid object in the selection. Site creation aborted. Nu este un obiect valid în selecția făcută. Crearea construcției abandonată. - + Node Tools Tipuri de Noduri - + Reset nodes Réinitializare Noduri - + Edit nodes Edit Nod - + Extend nodes Étendre les nœuds - + Extends the nodes of this element to reach the nodes of another element Întinde Nodurile acestui element până ating Nodurile altui element - + Connect nodes Conectează Nodurile - + Connects nodes of this element with the nodes of another element Conectează Nodurile acestui element cu Nodurile altui element - + Toggle all nodes Activează/dezactivează toate Nodurile - + Toggles all structural nodes of the document on/off Activează/dezactivează toate nodurile structurale a documentului pornit/oprit - + Intersection found. Intersecţie găsită. @@ -2487,22 +2512,22 @@ Site creation aborted. Ușă - + Hinge Balama - + Opening mode Modul de deschidere - + Get selected edge Obține marginea sélectionnată - + Press to retrieve the selected edge Apăsaţi pentru a prelua marginea selectate @@ -2532,17 +2557,17 @@ Site creation aborted. Strat nou - + Wall Presets... Presetările de perete... - + Hole wire Gaura de fir - + Pick selected Choix sélectionné @@ -2627,17 +2652,17 @@ Site creation aborted. Cet objet n’a pas de face - + Space boundaries Limites de l’espace - + Error: Unable to modify the base object of this wall Erreur : Impossible de modifier l’objet base de ce mur - + Window elements Élémente ale ferestrei @@ -2748,7 +2773,7 @@ Building creation aborted. Toate bune! Nici o problemă identificată - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Obiectul nu posedă atributul IfcProperties. Annulați crearea foii de calcul pentru obiectul: @@ -2930,47 +2955,47 @@ Floor creation aborted. Nici o foaie de calcul ataşată la această planificare - + Section plane settings Reglarea planului de secțiune - + Objects seen by this section plane: Obiect vizualizat în acest plan: - + Section plane placement: Amplasamentul planului de secțiune: - + Rotate X Rotaţie X - + Rotate Y Rotaţie Y - + Rotate Z Rotaţie Z - + Resize Redimensionați - + Center Centru - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2978,77 +3003,77 @@ Note: You can change that in the preferences. Vă rugăm să fie selectaţi numai constructii obiecte sau nimic altceva! Site-ul nu permite să accepte orice obiect în afară de clădire. Alte obiecte vor fi eliminate din selecţie. Notă: Puteţi modifica aceasta în Preferinţe. - + Choose another Structure object: Alege un alt obiect de Structura: - + The chosen object is not a Structure Obiectul ales nu este o Structură - + The chosen object has no structural nodes Obiectul ales nu are nu noduri structurale - + One of these objects has more than 2 nodes Una dintre aceste obiecte are mai mult de 2 noduri - + Unable to find a suitable intersection point Impossible de trouver un point d’intersection adapté - + Intersection found. Intersecţie găsită. - + The selected wall contains no subwall to merge Peretele selectat nu conține pereți auxiliari pentru îmbinat - + Cannot compute blocks for wall Nu se pot calcula blocurile pentru perete - + Choose a face on an existing object or select a preset Alege o față pe un obiect existent sau selectaţi o presetare - + Unable to create component Imposibil de creat componentul - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numărul de fire care defineşte o gaură în obiectul gazdă. O valoare de zero va adopta automat firul mai mare - + + default + implicit - + If this is checked, the default Frame value of this window will be added to the value entered here În cazul în care acest lucru este bifat, valoarea Cadrului implicit pt această fereastră va fi adăugată la valoarea introdusă aici - + If this is checked, the default Offset value of this window will be added to the value entered here În cazul în care acest lucru este bifat, valoarea implicită Offset pt această fereastră va fi adăugată la valoarea introdusă aici - + pycollada not found, collada support is disabled. pycollada nu a fost gasit, suportul pentru collada va fi dezactivat. @@ -3088,7 +3113,7 @@ Note: You can change that in the preferences. Eroare: versiunea de IfcOpenShell este prea veche - + Successfully written Scrierea a reușit @@ -3098,7 +3123,7 @@ Note: You can change that in the preferences. S-a găsit o formă care conține curbe, se triangulează - + Successfully imported Import efectuat cu succes @@ -3114,45 +3139,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Adaugă Selecția - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Stanga + + + + Right + Dreapta + + + + Use sketches + Utilizarea schite + + + + Structure + Structura + + + + Window + Fereastră + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3365,21 +3505,16 @@ You can change that in the preferences. Checks the selected objects for problems Verifică obiectele selectate pentru probleme - - - Explore the contents of an IFC file - Explorează conținutul unui fișier IFC - Arch_CloneComponent - + Clone component Clona componentă - + Clones an object as an undefined architectural component Clone un obiect ca o componentă arhitecturale nedefinit @@ -3400,12 +3535,12 @@ You can change that in the preferences. Arch_Component - + Component Componenta - + Creates an undefined architectural component Creează o componentă arhitecturale nedefinită @@ -3439,12 +3574,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3538,23 +3673,15 @@ You can change that in the preferences. Indicii de față poligon de ascuns - - Arch_IfcExplorer - - - Ifc Explorer - Explorator ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Creare foaie de calcul IFPC... - + Creates a spreadsheet to store IFC properties of an object. Creează o foaie de calcul pentru a stoca proprietățile IFC ale unui obiect. @@ -3583,12 +3710,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Pereți îmbinați - + Merges the selected walls, if possible Îmbină zidurile selectate, dacă este posibil @@ -3794,12 +3921,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Planul de selecţie - + Creates a section plane object, including the selected objects Crează un obiect - secţiune plană incluzând obiectele selectate @@ -3820,12 +3947,12 @@ You can change that in the preferences. Arch_Site - + Site Teren - + Creates a site object including selected objects. Crează un obiect teren, incluzând obiectele selectate. @@ -3872,12 +3999,12 @@ You can change that in the preferences. Arch_Structure - + Structure Structura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creează un obiect structura de la zero sau dintr-un obiect selectat (schita, sârmă, fata sau solide) @@ -3885,12 +4012,12 @@ You can change that in the preferences. Arch_Survey - + Survey Sondaj - + Starts survey Pornește sondajul @@ -3898,12 +4025,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Activează /dezactivează marcajul Brep IFC - + Force an object to be exported as Brep or not Forţează un obiect să fie exportat ca Brep sau nu @@ -3911,12 +4038,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Activează/dezactivează subcomponente - + Shows or hides the subcomponents of this object Afişează sau ascunde subcomponente de acest obiect @@ -3937,12 +4064,12 @@ You can change that in the preferences. Arch_Window - + Window Fereastră - + Creates a window object from a selected object (wire, rectangle or sketch) Creaza un obiect fereastra din obiectele selectate(polilinie, dreptunghi sau schita) @@ -4212,7 +4339,7 @@ You can change that in the preferences. Draft - + Writing camera position Scrie poziţia camerei @@ -4648,7 +4775,7 @@ You can change that in the preferences. Transparenţă: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Unele vizualizatoare de IFC nu tolerează obiecte exportate ca extruziuni, Folosește aceasta pentru a forța exportarea obiectelor ca geometrie BREP. @@ -4688,7 +4815,7 @@ You can change that in the preferences. Grosime - + Force export as Brep Forțează exportul ca Brep @@ -4718,7 +4845,7 @@ You can change that in the preferences. DAE - + Export options Opţiunile de export @@ -4928,22 +5055,22 @@ You can change that in the preferences. Permite poligoane cu patru fețe - + Use triangulation options set in the DAE options page Utilizaţi opţiunile de triangulaţie stabilit în pagina de opţiuni de DAE - + Use DAE triangulation options Utilizaţi opţiunile de triangulaţie DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Forme curbate, care nu pot fi reprezentate şi curbele în IFC sunt descompuse în faţete plane. În cazul în care acest lucru este verificat, unele calcule suplimentare sunt făcute pentru a se alătura faţete coplanare. - + Join coplanar facets when triangulating Alăturaţi faţete coplanare când se fac triangulării @@ -4983,12 +5110,12 @@ You can change that in the preferences. Import Ifc proprietăţile în foaia de calcul - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Când se exportă obiecte fără UID, UID generat vor fi stocate în interiorul obiectului FreeCAD pentru refolosirea data viitoare când acel obiect este exportat, ceea ce dă diffs mai mici între versiuni - + Store IFC universal ID in FreeCAD objects Magazin IFC ID universal în obiecte FreeCAD @@ -5058,17 +5185,17 @@ You can change that in the preferences. Split pereti multistrat - + Warning, experimental feature! Facilitate experimentală, atenţie! - + Use IfcOpenShell serializer if available Utilizarea IfcOpenShell serializatorului dacă există - + Export 2D objects as IfcAnnotations Exportul obiectelor 2D ca IfcAnnotations @@ -5093,12 +5220,12 @@ You can change that in the preferences. Ajustarea vederilor în timpul importului - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. În cazul în care acest lucru este bifat, toate proprietățile obiectului FreeCAD vor fi stocate în obiectele exportate, care să permită să recreeze un model complet parametric pe reimport. - + Export full FreeCAD parametric model Export complet FreeCAD parametrice model @@ -5153,22 +5280,22 @@ You can change that in the preferences. Listă excluderi: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans În cazul în care acest lucru este bifat, atunci când este posibil, entităţi similare vor fi folosite doar o singură dată în fișier. Acest lucru poate reduce foarte mult dimensiunea fişierului, dar va face mai puțin uşor de citit de către oameni - + Reuse similar entities Reutilizarea entităţilor similare - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Atunci când este posibil, obiectele IFC extrudat dreptunghiuri sunt exportate ca IfcRectangleProfileDef. Cu toate acestea, unele alte aplicaţii au notorietate probleme importatoare acea entitate. Dacă acesta este cazul dumneavoastră, aveţi posibilitatea să dezactivaţi acest lucru aici (toate profilele vor fi exportate ca IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Dezctivați IfcRectangleProfileDef @@ -5233,14 +5360,49 @@ You can change that in the preferences. Culoarea liniei - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index 57b07ced1a..06180eb086 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index 5fe26452fe..c99e384bcc 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -44,12 +44,12 @@ Исходный объект, от которого клонируется этот компонент - + Other shapes that are appended to this object Другие фигуры, добавленные к объекту - + Other shapes that are subtracted from this object Другие фигуры, вычитаемые из объекта @@ -79,7 +79,7 @@ Площадь всех вертикальных граней объекта - + The area of the projection of this object onto the XY plane Площадь проекции объекта на плоскость XY @@ -114,7 +114,7 @@ Расчётная площадь этажа - + The placement of this object Размещение объекта @@ -144,12 +144,12 @@ Вращение профиля вокруг оси выдавливания - + The length of this element, if not based on a profile Длина элемента, если не определена в профиле - + The width of this element, if not based on a profile Ширина элемента, если не определена в профиле @@ -194,22 +194,22 @@ Площадь панели - + The facemaker type to use to build the profile of this object Тип генератора граней, используемый для построения профиля объекта - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Направление выдавливания объекта (оставить (0,0,0) для автоматического определения) - + The linked object Связанный объект - + The line width of the rendered objects Толщина линии отрисованных объектов @@ -349,7 +349,7 @@ Высота элемента - + The structural nodes of this element Структурные узлы элемента @@ -614,132 +614,132 @@ Электронная таблица для вывода результатов - + If false, non-solids will be cut too, with possible wrong results. Если ложь, также будет сделано сечение нетвердотельных объектов. Возможно, с некорректным результатом. - + The display length of this section plane Отображение длины плоскости сечения - + The display height of this section plane Отображение высоты плоскости сечения - + The size of the arrows of this section plane Размер углов плоскости сечения - + Show the cut in the 3D view Показать сечение в трёхмерном виде - + The rendering mode to use Используемый режим визуализации - + If cut geometry is shown or not Показывать ли сечение геометрии или нет - + If cut geometry is filled or not Делать ли заливку обрезанной геометрии или нет - + The size of the texts inside this object Размер текста внутри объекта - + If checked, source objects are displayed regardless of being visible in the 3D model Если флажок установлен, исходные объекты отображаются независимо от видимости в 3D-модели - + The base terrain of this site Базовый рельеф местности - + The postal or zip code of this site Почтовый или ZIP-код местности - + The city of this site Город в котором расположена эта местность - + The country of this site Страна в которой эта местность находится - + The latitude of this site Широта этой местности - + Angle between the true North and the North direction in this document Угол между истинным севером и направлением севера в документе - + The elevation of level 0 of this site Высотная отметка нулевого уровня местности - + The perimeter length of this terrain Длина периметра рельефа - + The volume of earth to be added to this terrain Объем земли, добавляемый к рельефу - + The volume of earth to be removed from this terrain Объем земли, исключаемый из рельефа - + An extrusion vector to use when performing boolean operations Вектор выдавливания, используемый при выполнении булевых операций - + Remove splitters from the resulting shape Удалить разделители из полученной фигуры - + Show solar diagram or not Показывать инсоляционный график или нет - + The scale of the solar diagram Масштаб инсоляционного графика - + The position of the solar diagram Положение инсоляционного графика - + The color of the solar diagram Цвет инсоляционного графика @@ -785,81 +785,76 @@ - A zone this space is part of - Область, частью которой является зона - - - The number of people who typically occupy this space Типичное количество людей, находящихся в зоне - + The electric power needed to light this space in Watts Электрическая мощность в ваттах, необходимая для освещения зоны - + The electric power needed by the equipment of this space in Watts Электрическая мощность в ваттах, необходимая оборудованию в зоне - + If True, Equipment Power will be automatically filled by the equipment included in this space Если истина, мощность оборудования будет автоматически рассчитана на основе оборудовании, находящегося в зоне - + The type of air conditioning of this space Тип кондиционирования зоны - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Отображаемый текст. Используйте $area, $label, $tag, $floor, $walls, $ceiling для вставки соответствующих данных - + The name of the font Название шрифта - + The color of the area text Цвет текста в области - + The size of the text font Размер шрифта - + The size of the first line of text Размер первой строки текста - + The space between the lines of text Расстояние между строками текста - + The position of the text. Leave (0,0,0) for automatic position Положение текста. Оставьте (0,0,0) для автоматического расположения - + The justification of the text Выравнивание текста - + The number of decimals to use for calculated texts Количество десятичных знаков для генерируемых текстов - + Show the unit suffix Показать единицу измерения @@ -939,102 +934,102 @@ Смещение между границей лестницы и её конструкцией - + An optional extrusion path for this element Необязательный путь выдавливания элемента - + The height or extrusion depth of this element. Keep 0 for automatic Высота или глубина выдавливания элемента. Задайте 0 для автоматического определения - + A description of the standard profile this element is based upon Описание стандартного профиля, на котором основан элемент - + Offset distance between the centerline and the nodes line Расстояние смещения между осевой и узловой линией - + If the nodes are visible or not Видны ли узлы или нет - + The width of the nodes line Ширина узловых линий - + The size of the node points Размер узловых точек - + The color of the nodes line Цвет линии узлов - + The type of structural node Тип конструкционного узла - + Axes systems this structure is built on Система координат, на основе которой построена конструкция - + The element numbers to exclude when this structure is based on axes Исключаемые номера элементов, если конструкция основана на осях - + If true the element are aligned with axes Если истина, элемент выравнивается по осям - + The length of this wall. Not used if this wall is based on an underlying object Длина стены. Не используется, если стена основана на базовом объекте - + The width of this wall. Not used if this wall is based on a face Ширина стены. Не используется, если эта стена основана на грани - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Высота стены. Задайте 0 для автоматического определения. Не используется, если стена основана на твердотельном объекте - + The alignment of this wall on its base object, if applicable Выравнивание стены по базовому объекту, если возможно - + The face number of the base object used to build this wall Число граней базового объекта, используемого для построения стены - + The offset between this wall and its baseline (only for left and right alignments) Смещение между стеной и её базовой линией (только для левого и правого выравнивания) - + The normal direction of this window Направление нормали этого окна - + The area of this window Площадь этого окна @@ -1049,7 +1044,7 @@ Необязательное дополнительное размещение для добавления к профилю перед его выдавливанием - + Opens the subcomponents that have a hinge defined Открывает подкомпоненты, которые имеют петли @@ -1089,12 +1084,12 @@ Список толщин слоя - + The line color of the projected objects Цвет линии проецируемых объектов - + The color of the cut faces (if turned on) Цвет сечения граней (если включен) @@ -1104,7 +1099,7 @@ Перекрытие тетив над нижней частью проступей - + The number of the wire that defines the hole. A value of 0 means automatic Количество ломанных линий, определяющих отверстие. Значение 0 означает автоматическое определение @@ -1194,7 +1189,7 @@ Пользовательский шаг арматуры - + Shape of rebar Форма арматуры @@ -1204,17 +1199,17 @@ Отразите направление крыши, если оно некорректно - + Shows plan opening symbols if available Показывает символы отверстий, если доступны - + Show elevation opening symbols if available Показывать высоты символов отверстий, если доступны - + The objects that host this window Объекты, содержащие окно @@ -1269,12 +1264,12 @@ Уровень точки отсчета (0,0,0) этого этажа - + The shape of this object Форма этого объекта - + The line width of this object Ширина линий этого объекта @@ -1414,47 +1409,47 @@ Если истина, то цвета из связанного файла будет обновляться - + The objects that must be considered by this section plane. Empty means the whole document. Объекты, которые должны быть видны на этой плоскости сечения. Пустой означает весь документ. - + The transparency of this object Прозрачность этого объекта - + The color of this object Цвет этого объекта - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Расстояние между плоскостью сечения и сечением текущего вида(устанавливайте очень маленькое, но не нулевое значение) - + The street and house number of this site, with postal box or apartment number if needed Номер улицы и дома этой местности, почтовый ящик или номер квартиры при необходимости - + The region, province or county of this site Регион, область или страна этой местности - + A url that shows this site in a mapping website Ссылка для показа этой местности на картографическом сайте - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Опционально смещение между началом координат модели (0,0,0) и точкой, обозначенной геокоординатами - + Specifies if this space is internal or external Указывает, является ли эта зона внутренней или внешней @@ -1504,104 +1499,104 @@ «Левый контур» всех сегментов лестницы - + Enable this to make the wall generate blocks Включите это чтобы генерировать блоки стены - + The length of each block Длина каждого блока - + The height of each block Высота каждого блока - + The horizontal offset of the first line of blocks Горизонтальное смещение первой линии блоков - + The horizontal offset of the second line of blocks Горизонтальное смещение второй линии блоков - + The size of the joints between each block Размер соединения между каждым блоком - + The number of entire blocks Число полных блоков - + The number of broken blocks Количество неполных блоков - + The components of this window Компоненты этого окна - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Глубина отверстия, которое формирует это окно в основном объекте. Если установлено 0, то значение будет рассчитываться автоматически. - + An optional object that defines a volume to be subtracted from hosts of this window Необязательный объект, определяющий объем окна, который будет вычитаться из исходных объектов - + The width of this window Ширина окна - + The height of this window Высота окна - + The preset number this window is based on Это окно основывается на номере пресета (номере настройки) - + The frame size of this window Размер рамы окна - + The offset size of this window Смещение окна - + The width of louvre elements Ширина элементов жалюзи - + The space between louvre elements Расстояние между элементами жалюзи - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Количество ломанных линий, определяющих отверстие. Значение 0 означает автоматическое определение Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Задаёт поведение, что при перемещении этого объекта вместо него перемещается его основа @@ -1629,57 +1624,57 @@ The number of posts used to build the fence - + The type of this object - The type of this object + Тип этого объекта IFC data - IFC data + Данные IFC IFC properties of this object - IFC properties of this object + IFC cвойства этого объекта - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Описание атрибутов IFC еще не реализовано - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - Show compass or not + Показывать компас или нет - + The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Поворот компаса относительно местности - + The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + Позиция компаса относительно размещения местности - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Компоненты @@ -1717,12 +1742,12 @@ Создать координатную ось - + Remove Удалить - + Add Добавить @@ -1832,87 +1857,87 @@ Вид - + Create Section Plane Создать плоскость сечения - + Create Site Создать Местность - + Create Structure Создать Структуру - + Create Wall Создать Стену - + Width Ширина - + Height Высота - + Error: Invalid base object Ошибка: Недопустимый базовый объект - + This mesh is an invalid solid Эта полигональная сетка не является замкнутым объёмом - + Create Window Создать Окно - + Edit Редактировать - + Create/update component Создать/обновить компонент - + Base 2D object Базовый 2D-объект - + Wires Ломанные линии - + Create new component Создать новый компонент - + Name Название - + Type Тип - + Thickness Толщина @@ -1922,7 +1947,7 @@ Ошибка: Не удалось определить кодировку символов - + file %s successfully created. файл %s успешно создан. @@ -1972,32 +1997,32 @@ Создать Лестницу - + Length Длина - + Error: The base shape couldn't be extruded along this tool object Ошибка: Базовая фигура не может выдавливаться вдоль вспомогательного объекта - + Couldn't compute a shape Не могу рассчитать фигуру - + Merge Wall Объединить Стену - + Please select only wall objects Пожалуйста, выберите только объекты стен - + Merge Walls Объединить Стены @@ -2012,7 +2037,7 @@ Ошибка при расчёте формы этого объекта - + Create Structural System Создать структурную систему @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Высота (мм) - + Create Component Создать Компонент @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Стены могут основываться только на объекте Детали или Полигональной Сетке - + Set text position Задать положение текста - + Category Категория - + Key Клавиша @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Значение - + Unit Единица измерения - + Create IFC properties spreadsheet Создать таблицу свойств IFC @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Создать Лист панелей - + Facemaker returned an error Генератор граней вернул ошибку @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Создать Соединитель - + Precast elements Сборочные элементы - + Slab type Тип плиты - + Chamfer Фаска - + Dent length Длина выемки - + Dent width Ширина выемки - + Dent height Высота выемки - + Slab base Основание плиты - + Number of holes Количество отверстий - + Major diameter of holes Основной диаметр отверстий - + Minor diameter of holes Малый диаметр отверстий - + Spacing between holes Расстояние между отверстиями - + Number of grooves Количество пазов - + Depth of grooves Глубина пазов - + Height of grooves Высота пазов - + Spacing between grooves Расстояние между пазами - + Number of risers Количество подступёнков - + Length of down floor Длина нижнего этажа - + Height of risers Высота подступёнков - + Depth of treads Глубина проступи - + Precast options Параметры сборочных элементов - + Dents list Список выемок - + Add dent Добавить выемку - + Remove dent Удалить выемку - + Slant Уклон - + Level Уровень - + Rotation Вращение - + Offset Смещение @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Планирование - + There is no valid object in the selection. Site creation aborted. Нет допустимого объекта в выделении. Построение места прервано. - + Node Tools Инструменты Узлов - + Reset nodes Сбросить узлы - + Edit nodes Редактировать узлы - + Extend nodes Расширить узлы - + Extends the nodes of this element to reach the nodes of another element Расширяет узлы элемента для доступа к узлам другого элемента - + Connect nodes Соединить узлы - + Connects nodes of this element with the nodes of another element Соединяет узлы элемента с узлами другого элемента - + Toggle all nodes Переключить все узлы - + Toggles all structural nodes of the document on/off Включает/выключает все структурные узлы документа - + Intersection found. Найдено пересечение. @@ -2486,22 +2511,22 @@ Site creation aborted. Дверь - + Hinge Петля - + Opening mode Способ открытия - + Get selected edge Получить выбранное ребро - + Press to retrieve the selected edge Нажмите, чтобы получить выбранное ребро @@ -2531,17 +2556,17 @@ Site creation aborted. Новый слой - + Wall Presets... Преднастройки стен... - + Hole wire Ломанная линия отверстия - + Pick selected Указать выбранное @@ -2626,17 +2651,17 @@ Site creation aborted. Объект не имеет грани - + Space boundaries Границы зоны - + Error: Unable to modify the base object of this wall Ошибка: Не удается изменить базовый объект этой стены - + Window elements Элементы окна @@ -2749,7 +2774,7 @@ Building creation aborted. Все в порядке! Проблем не найдено - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Объект не имеет атрибута IfcProperties. Отменить создание таблицы для объекта: @@ -2932,47 +2957,47 @@ Floor creation aborted. Нет таблицы, приложенной к расписанию - + Section plane settings Настройки плоскости сечения - + Objects seen by this section plane: Объекты, видимые плоскостью сечения: - + Section plane placement: Размещение плоскости сечения: - + Rotate X Повернуть по X - + Rotate Y Повернуть по Y - + Rotate Z Повернуть по Z - + Resize Изменить размер - + Center Центр - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2983,77 +3008,77 @@ Note: You can change that in the preferences. Вы можете изменить это в настройках. - + Choose another Structure object: Выберите другой структурный объект: - + The chosen object is not a Structure Выбранный объект не является структурным - + The chosen object has no structural nodes Выбранный объект не имеет структурных узлов - + One of these objects has more than 2 nodes Один из объектов имеет более 2-х узлов - + Unable to find a suitable intersection point Не удаётся найти соответствующую точку пересечения - + Intersection found. Пересечение найдено. - + The selected wall contains no subwall to merge Выбранная стена не содержит внутренних стен для слияния - + Cannot compute blocks for wall Не удается вычислить блоки для стен - + Choose a face on an existing object or select a preset Выберите грань на существующем объекте или выберите преднастройку - + Unable to create component Невозможно создать компонент - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Количество ломанных линий, определяющих отверстие в исходном объекте. Ноль автоматически задаёт наибольшее значение - + + default + значения по умолчанию - + If this is checked, the default Frame value of this window will be added to the value entered here Если этот флажок установлен, для данного окна будут добавлены значения рамы по умолчанию к введенному здесь значению - + If this is checked, the default Offset value of this window will be added to the value entered here Если этот флажок установлен, для данного окна будут добавлены значения смещения по умолчанию к введенному здесь значению - + pycollada not found, collada support is disabled. Модуль "pycollada" не найден, поддержка "collada" отключена. @@ -3093,7 +3118,7 @@ Note: You can change that in the preferences. Ошибка: ваша версия IfcOpenShell устарела - + Successfully written Успешно записано @@ -3103,7 +3128,7 @@ Note: You can change that in the preferences. Найдена фигура, содержащая кривые. Триангуляция - + Successfully imported Успешно импортировано @@ -3119,45 +3144,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Добавить выбранное - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis - Rotates the plane along the X axis + Поворачивает плоскость вдоль оси X + + + + Rotates the plane along the Y axis + Поворачивает плоскость вдоль оси Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Поворачивает плоскость вдоль оси Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis - - - Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Следующая точка + + + + Structure options + Параметры конструкции + + + + Drawing mode + Режим отображения + + + + Beam + Балка + + + + Column + Колонна + + + + Preset + Предустановка + + + + Switch L/H + Перекл. Длина/Высота + + + + Switch L/W + Перекл. длина/ширина + + + + Con&tinue + &Продолжить + + + + First point of wall + Первая точка стены + + + + Wall options + Параметры стены + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Этот список показывает все объекты MultiMaterials этого документа. Создайте некоторые для определения типов стен. + + + + Alignment + Выравнивание + + + + Left + Слева + + + + Right + Справа + + + + Use sketches + Использование эскизов + + + + Structure + Структура + + + + Window + Окно + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3370,21 +3510,16 @@ You can change that in the preferences. Checks the selected objects for problems Проверяет выбранные объекты на ошибки - - - Explore the contents of an IFC file - Просмотреть содержимое IFC-файла - Arch_CloneComponent - + Clone component Клонировать компонент - + Clones an object as an undefined architectural component Клонирует объект как неопределённый архитектурный компонент @@ -3405,12 +3540,12 @@ You can change that in the preferences. Arch_Component - + Component Компонент - + Creates an undefined architectural component Создаёт неопределённый архитектурный компонент @@ -3444,12 +3579,12 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Ограда - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3543,23 +3678,15 @@ You can change that in the preferences. Индексы граней для скрытия - - Arch_IfcExplorer - - - Ifc Explorer - IFC-проводник - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Создать IFC-таблицу... - + Creates a spreadsheet to store IFC properties of an object. Создаёт таблицу для хранения IFC-свойств объекта. @@ -3588,12 +3715,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Объединить Стены - + Merges the selected walls, if possible Объединяет выбранные стены, если это возможно @@ -3799,12 +3926,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Плоскость Сечения - + Creates a section plane object, including the selected objects Создаёт объект плоскости сечения, выбранных объектов @@ -3825,12 +3952,12 @@ You can change that in the preferences. Arch_Site - + Site Местность - + Creates a site object including selected objects. Создаёт объект Местности из выбранных объектов. @@ -3877,12 +4004,12 @@ You can change that in the preferences. Arch_Structure - + Structure Структура - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Создаёт новый объект структуры с нуля или на основе выбранного объекта (эскиза, ломаной линии, грани или твердотельного объекта) @@ -3890,12 +4017,12 @@ You can change that in the preferences. Arch_Survey - + Survey Анализ - + Starts survey Запускает анализ @@ -3903,12 +4030,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Переключение IFC BREP-флага объекта - + Force an object to be exported as Brep or not Экспортировать как BREP-объект или нет @@ -3916,12 +4043,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Переключить подкомпоненты - + Shows or hides the subcomponents of this object Показывает или скрывает подкомпоненты объекта @@ -3942,12 +4069,12 @@ You can change that in the preferences. Arch_Window - + Window Окно - + Creates a window object from a selected object (wire, rectangle or sketch) Создаёт объект окна на основе выбранных объектов (ломаной линии, прямоугольника или эскиза) @@ -4218,7 +4345,7 @@ You can change that in the preferences. Draft - + Writing camera position Записать позицию камеры @@ -4654,7 +4781,7 @@ You can change that in the preferences. Прозрачность: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Некоторым IFC-просмотрщикам не нравятся объекты, экспортируемые как выдавленные. Используйте это для принудительного экспорта всех объектов в виде BREP-геометрии. @@ -4694,7 +4821,7 @@ You can change that in the preferences. Толщина - + Force export as Brep Принудительно экспортировать как BREP @@ -4724,7 +4851,7 @@ You can change that in the preferences. DAE - + Export options Параметры экспорта @@ -4934,22 +5061,22 @@ You can change that in the preferences. Разрешить четырёхугольники - + Use triangulation options set in the DAE options page Использовать параметры триангуляции, заданные на странице настроек DAE - + Use DAE triangulation options Использовать параметры триангуляции DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Формы кривых, которые не могут быть представлены как кривые в IFC, разбиваются на плоские грани. Если этот флажок установлен, проводятся дополнительные расчёты для соединения компланарных граней. - + Join coplanar facets when triangulating Объединять компланарные грани при триангуляции @@ -4989,12 +5116,12 @@ You can change that in the preferences. Импортировать Ifc-свойства в электронную таблицу - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions При экспорте объектов без UID, сгенерированный UID будет храниться внутри объекта FreeCAD для повторного использования при следующем экспорте, что даёт меньше различий между версиями - + Store IFC universal ID in FreeCAD objects Хранить универсальный IFC-идентификатор внутри объектов FreeCAD @@ -5064,17 +5191,17 @@ You can change that in the preferences. Разделить многослойные стены - + Warning, experimental feature! Внимание, экспериментальная функция! - + Use IfcOpenShell serializer if available Использовать сериализатор IfcOpenShell, если доступен - + Export 2D objects as IfcAnnotations Экспорт двумерных объектов как IfcAnnotations @@ -5099,12 +5226,12 @@ You can change that in the preferences. Вписать в вид при импорте - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Если флажок установлен, все свойства объекта FreeCAD будут храниться внутри экспортированных объектов, позволяя воссоздать полную параметрическую модель при повторном импорте. - + Export full FreeCAD parametric model Экспорт полной параметрической модели FreeCAD @@ -5159,59 +5286,59 @@ You can change that in the preferences. Список исключений: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Если этот флажок установлен, по возможности, подобные объекты будут записаны только один раз в файле. Это может сильно уменьшить размер файла, но сделает его менее человекочитаемым - + Reuse similar entities Повторное использование аналогичных записей - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Когда возможно, IFC объекты, являющиеся экструдированными прямоугольниками экспортируются как IfcRectangleProfileDef. Однако некоторые другие приложения заведомо имеют проблемы при импорте этой сущности. Если это ваш случай, вы можете отключить это здесь (все профили будут экспортироваться как IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Отключить IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Задать свойство «Переместить основу» в истину по умолчанию IFC version - IFC version + Версия IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + Версия IFC изменит, поддерживаемые атрибуты и продукты IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Пробелы Line style: - Line style: + Стиль линии: @@ -5221,17 +5348,17 @@ You can change that in the preferences. Dashed - Dashed + Штриховая Dotted - Dotted + Пунктирная Dashdot - Dashdot + Штрихпунктир @@ -5239,14 +5366,49 @@ You can change that in the preferences. Цвет линии - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Некоторые типы IFC, такие как IfcWall или IfcBeam, имеют специальные стандартные версии, такие как IfcWallStandardCase или IfcBeamStandardCase. Если эта опция включена, FreeCAD автоматически экспортирует такие объекты, как стандартные случаи, если будут выполнены необходимые условия. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.qm b/src/Mod/Arch/Resources/translations/Arch_sk.qm index 1ae44ede1a..aee1d0c355 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sk.qm and b/src/Mod/Arch/Resources/translations/Arch_sk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.ts b/src/Mod/Arch/Resources/translations/Arch_sk.ts index 3593759754..b64a0f81da 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sk.ts @@ -44,12 +44,12 @@ The object this component is cloning - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object @@ -79,7 +79,7 @@ The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -114,7 +114,7 @@ Vypočítaná plocha tohto podlažia - + The placement of this object Umiestnenie objektu @@ -144,12 +144,12 @@ The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -194,22 +194,22 @@ Plocha tohto panelu - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object Prepojený objekt - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponenty @@ -1717,12 +1742,12 @@ Vytvoriť os - + Remove Odstrániť - + Add Pridať @@ -1832,87 +1857,87 @@ Pohľad na - + Create Section Plane Vytvorenie roviny rezu - + Create Site Vytvor terén - + Create Structure Vytvor štruktúru - + Create Wall Vytvoriť stenu - + Width Šírka - + Height Výška - + Error: Invalid base object Chyba: Neplatný základný objekt - + This mesh is an invalid solid Tato sieť netvorí platné teleso - + Create Window Vytvoriť okno - + Edit Upraviť - + Create/update component Create/update component - + Base 2D object Základný 2D objekt - + Wires Wires - + Create new component Create new component - + Name Názov - + Type Typ - + Thickness Thickness @@ -1922,7 +1947,7 @@ Error: Couldn't determine character encoding - + file %s successfully created. file %s successfully created. @@ -1972,32 +1997,32 @@ Create Stairs - + Length Dĺžka - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls @@ -2012,7 +2037,7 @@ Error computing the shape of this object - + Create Structural System Create Structural System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Height (mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category Kategória - + Key Key @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Hodnota - + Unit Jednotka - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Skosenie - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Odsadenie @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Center - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Vľavo + + + + Right + Vpravo + + + + Use sketches + Use sketches + + + + Structure + Konštrukcia + + + + Window + Okno + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Checks the selected objects for problems - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Rovina rezu - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Terén - + Creates a site object including selected objects. Vytvorí objekt Terén vrátane označených objektov @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Konštrukcia - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Vytvorí objekt Konštrukcie, od nuly alebo z vybratého objektu (náčrt, drôtový, plocha alebo pevný) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Okno - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. Priesvitnosť: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Thickness - + Force export as Brep Force export as Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Farba čiary - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm index e17655688e..7f03c13009 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index 036e498d4c..5a65609338 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -44,12 +44,12 @@ Predmet, ki ga podvaja ta sestavina - + Other shapes that are appended to this object Druge oblike, ki so pripete temu predmetu - + Other shapes that are subtracted from this object Druge oblike, ki so odštete od tega predmeta @@ -79,7 +79,7 @@ Površina vseh navpičnih ploskev tega predmeta - + The area of the projection of this object onto the XY plane Območje preslikave tega predmeta na ravnino XY @@ -114,7 +114,7 @@ Izračunana površina tal tega nadstropja - + The placement of this object Postavitev tega predmeta @@ -144,12 +144,12 @@ Vrtenje prereza okoli svoje osi izrivanja - + The length of this element, if not based on a profile Dolžina tega elementa, ko ni povzeta iz profila - + The width of this element, if not based on a profile Širina tega elementa, ko ni povzeta iz profila @@ -194,22 +194,22 @@ Območje plošče - + The facemaker type to use to build the profile of this object Vrsta "facemaker" uporabljena za izgradnjo profila predmeta - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normala smeri izrivanja tega predmeta (pustite (0,0,0) za samodejno smer) - + The linked object Povezani predmet - + The line width of the rendered objects Debelina črte izrisanih predmetov @@ -349,7 +349,7 @@ Višina priključka - + The structural nodes of this element Konstrukcijska vozlišča tega elementa @@ -614,132 +614,132 @@ Preglednica za tiskanje rezultatov - + If false, non-solids will be cut too, with possible wrong results. Če je narobe, bodo prerezani tudi nepolni predmeti z možnimi napačnimi rezultati. - + The display length of this section plane Prikazana dolžina te presečne ravnine - + The display height of this section plane Prikazana višina te prečne ravnine - + The size of the arrows of this section plane Velikost puščic te presečne ravnine - + Show the cut in the 3D view Prikaži prerez v pogledu 3D - + The rendering mode to use Uporabljen način prikaza - + If cut geometry is shown or not Če je rezna geometrija prikazana ali ne - + If cut geometry is filled or not Če je rezna geometrija polnjena ali ne - + The size of the texts inside this object Velikost pisave znotraj predmeta - + If checked, source objects are displayed regardless of being visible in the 3D model Kadar obkljukano, izvori predmetov so prikazani ne glede na to ali so vidni v 3D modelu - + The base terrain of this site Osnovni teren te lokacije - + The postal or zip code of this site Poštna številka te lokacije - + The city of this site Mesto lokacije - + The country of this site Država lokacije - + The latitude of this site Zemljepisna širina te lokacije - + Angle between the true North and the North direction in this document Prikazan kot med pravim severom in severni smeri v dokumentu - + The elevation of level 0 of this site Višina stopnje 0 te lokacije - + The perimeter length of this terrain Dolžina ograde terena - + The volume of earth to be added to this terrain Prostornina zemlje, ki bo dodana na teren - + The volume of earth to be removed from this terrain Prostornina zemlje, ki bo odvzeta iz terena - + An extrusion vector to use when performing boolean operations Vektor izrivanja, ki se ga uporabi pri izvajanju logičnih operacij - + Remove splitters from the resulting shape Odstrani razdelilce iz končne oblike - + Show solar diagram or not Prikaži solarni diagram ali ne - + The scale of the solar diagram Lestvica sončnega diagrama - + The position of the solar diagram Položaj sončnega diagrama - + The color of the solar diagram Barva sončnega diagrama @@ -785,81 +785,76 @@ - A zone this space is part of - Cona, katere del je ta prostor - - - The number of people who typically occupy this space Število ljudi, ki običajno zasedajo ta prostor - + The electric power needed to light this space in Watts Električna energija, ki jo ta oprema potrebuje za prostor v watih - + The electric power needed by the equipment of this space in Watts Električna energija, ki jo oprema potrebuje za prostor v watih - + If True, Equipment Power will be automatically filled by the equipment included in this space Če je vrednost True, bo moč opreme avtomatsko zapolnjena z opremo v tem prostoru - + The type of air conditioning of this space Vrsta klimatizacije tega prostora - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Besedilo za prikaz. Uporabi $area, $label, $tag, $floor, $walls, $ceiling za vstavitev ustreznih podatkov - + The name of the font Ime pisave besedila - + The color of the area text Barva besedila površine - + The size of the text font Velikost pisave besedila - + The size of the first line of text Velikost prve vrstice besedila - + The space between the lines of text Razmik med vrsticami - + The position of the text. Leave (0,0,0) for automatic position Položaj besedila. Pustite (0,0,0) za samodejno poravnavo - + The justification of the text Utemeljitev besedila - + The number of decimals to use for calculated texts Število decimalk uporabljenih za izračun besedila - + Show the unit suffix Prikaži pripono enote @@ -939,102 +934,102 @@ Odmik med robom stopnišča in konstrukcijo - + An optional extrusion path for this element Možnost poti izrivanja tega elementa - + The height or extrusion depth of this element. Keep 0 for automatic Višina oziroma globina izriva elementa. Pustite 0 za samodejno - + A description of the standard profile this element is based upon Opis standardnega profila, na katerem je osnovan element - + Offset distance between the centerline and the nodes line Odmik med središčnico in črto vozlišča - + If the nodes are visible or not Če so vozlišča vidna ali ne - + The width of the nodes line Debelina črte vozlišča - + The size of the node points Velikost točk vozlišča - + The color of the nodes line Barva črte vozlišča - + The type of structural node Vrsta strukturnega vozlišča - + Axes systems this structure is built on Osni sistem, ki je osnova te konstrukcije - + The element numbers to exclude when this structure is based on axes Številke elementa, katere se ne upoštevajo na osnovi sistema osi - + If true the element are aligned with axes Če je True so elementi poravnani z osjo - + The length of this wall. Not used if this wall is based on an underlying object Dolžina zidu. Ni uporabljena v primeru, ko je zid osnovan na spodnjem objektu - + The width of this wall. Not used if this wall is based on a face Širina zidu. Ni upoštevana, če je zid na osnovni ploskvi - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Višina zidu. Pusititi 0 za samodejno. Ni upoštevana v primeru, ko je zid na osnovi telesa - + The alignment of this wall on its base object, if applicable Poravnanva zidu na osnovni objekt, kjer je to možno - + The face number of the base object used to build this wall Število ploskev osnovneha objekta, katere so uporabljene za gradnjo zidu - + The offset between this wall and its baseline (only for left and right alignments) Odmik med steno in osnovnico (le za poravnave levo in desno) - + The normal direction of this window Običajna smer okna - + The area of this window Območje okna @@ -1049,7 +1044,7 @@ Možnost dodatne postavitev, ki se jo doda prerezu pred izrivanjem - + Opens the subcomponents that have a hinge defined Odpre podsestavine, ki imajo tečaje @@ -1089,12 +1084,12 @@ Seznam debeline slojev - + The line color of the projected objects Barva črt preslikanih predmetov - + The color of the cut faces (if turned on) Barva rezanih ploskev (če je vklopljeno) @@ -1104,7 +1099,7 @@ Seganje nosilca preko nastopne ploskve - + The number of the wire that defines the hole. A value of 0 means automatic Številka črtovja, ki določa preboj. Vrednost 0 pomeni samodejno @@ -1194,7 +1189,7 @@ Ročna nastavitev razmika betonskega jekla - + Shape of rebar Oblika betonskih jekel @@ -1204,17 +1199,17 @@ Obrni smer strehe, v primeru da je napačna - + Shows plan opening symbols if available Prikazovanje tlorisnih oznak odprtin, če so razpoložljive - + Show elevation opening symbols if available Prikazuje oznake odprtin v pogledu, če so te razpoložljive - + The objects that host this window Objekti, v katerih je to okno @@ -1269,12 +1264,12 @@ Višina točke (0,0,0) te ravni - + The shape of this object Oblika tega objekta - + The line width of this object Debelina črt tega predmeta @@ -1414,47 +1409,47 @@ Če drži, se bodo barve povezane datoteke posodabljale - + The objects that must be considered by this section plane. Empty means the whole document. Predmeti, ki morajo biti v prerezni ravnini zajeti. Prazno pomeni celoten dokument. - + The transparency of this object Prozornost tega predmeta - + The color of this object Barva tega predmeta - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Razdalja med rezalno ravnino in ravnino vidnega polja (razdalja naj bo majhna, vendar ne nič) - + The street and house number of this site, with postal box or apartment number if needed Ulica/naselje in hišna številka lokacije, po potrebi s številko poštnega predala ali stanovanja - + The region, province or county of this site Regija, provinca ali država lokacije - + A url that shows this site in a mapping website URL, ki prikazuje to lokacijo na spletnem zemljevidu - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Možnost določitve odmika me izhodiščem modela (0,0,0) in točko podano v zemljepisnih sorednicah - + Specifies if this space is internal or external Določi, ali je prostor notranji ali zunanji @@ -1504,200 +1499,230 @@ "Levi rob" vseh odsekov stopnic - + Enable this to make the wall generate blocks Omogočite, če želite, da se z zidom izrešejo zidaki - + The length of each block Dolžina posameznega zidaka - + The height of each block Širina posameznega zidaka - + The horizontal offset of the first line of blocks Vodoravni odmik prve vrste zidakov - + The horizontal offset of the second line of blocks Vodoravni odmik druge vrste zidakov - + The size of the joints between each block Velikost reže med zidakoma - + The number of entire blocks Število vseh zidakov - + The number of broken blocks Število rezanih zidakov - + The components of this window Sestavine tega okna - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Globina luknje za okno v predmetu, v katerga je vstavljeno. Pustite 0 za samodejno določitev. - + An optional object that defines a volume to be subtracted from hosts of this window Izbirni predmet, ki določa prostornino, odvzeto od predmetov, v katere je vstavljeno to okno - + The width of this window Širina tega okna - + The height of this window Višina tega okna - + The preset number this window is based on Privzeto število, na podlaga je izrisano to okno - + The frame size of this window Velikost okenskega okvirja - + The offset size of this window Odmik od okna - + The width of louvre elements Širina lamelnih senčil - + The space between louvre elements Razmik med lamelami senčila - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Številka črtovja, ki določa preboj. Če je 0, se vrednost samodejno izračuna Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Določa, če se s premikanjem tega predmeta v resnici premakne njegova podloga A single section of the fence - A single section of the fence + En sam odsek ograje A single fence post - A single fence post + Ena sama stojka ograje The Path the fence should follow - The Path the fence should follow + Pot, po kateri naj poteka ograja The number of sections the fence is built of - The number of sections the fence is built of + Število odsekov, iz katerih je sestavljena ograja The number of posts used to build the fence - The number of posts used to build the fence + Število stojk, uporabljenih v ograji - + The type of this object - The type of this object + Vrsta tega predmeta IFC data - IFC data + Podatki IFC IFC properties of this object - IFC properties of this object + IFC lastnosti tega predmeta - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Opisi IFC značilk niso še podprti + + + + If True, resulting views will be clipped to the section plane area. + Če drži, bodo posledično pogledi zamejeni s površino presečne ravnine. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Če drži, bo za zapolnitev odrezanih ploskev uporabljena barva predmetove snovi. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Ko je nastavljeno na "Pravi sever", bo celotna geometrija zasukana tako, da bo odgovarjala pravemu severu te situacije - + + Show compass or not + Prikaži kompas ali ne + + + + The rotation of the Compass relative to the Site + Zasuk kompasa glede na Lokacijo + + + + The position of the Compass relative to the Site placement + Zasuk kompasa glede na postavitev Lokacije + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Posodobi odklon na podlagi zasukanosti kompasa The thickness of the risers - The thickness of the risers + Debelina čelnice The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + "Desni rob" vseh odsekov stopnic + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Komponente @@ -1717,12 +1742,12 @@ Ustvarite os - + Remove Odstrani - + Add Dodaj @@ -1832,87 +1857,87 @@ Pogled - + Create Section Plane Ustvari presečno ravnino - + Create Site Ustvari lokacijo - + Create Structure Ustvari konstrukcijo - + Create Wall Ustvari zid - + Width Širina - + Height Višina - + Error: Invalid base object Napaka: Neveljavni izhodiščni predmet - + This mesh is an invalid solid Ta mreža je neveljavno telo - + Create Window Ustvari okno - + Edit Uredi - + Create/update component Ustvari/posodobi komponento - + Base 2D object Izhodiščni 2D predmet - + Wires Črtovja - + Create new component Ustvari novo komponento - + Name Ime - + Type Vrsta - + Thickness Debelina @@ -1922,7 +1947,7 @@ Napaka: Ni bilo možno ugotoviti načina kodiranja znakov - + file %s successfully created. datoteka %s uspešno ustvarjena. @@ -1972,32 +1997,32 @@ Ustvari stopnišče - + Length Dolžina - + Error: The base shape couldn't be extruded along this tool object Napaka: osnovne oblike ni bilo mogoče izvleči vzdolž tega orodja - + Couldn't compute a shape Ni bilo možno izračunati oblike - + Merge Wall Združi zid - + Please select only wall objects Izberite le stene - + Merge Walls Združi zidove @@ -2012,7 +2037,7 @@ Napaka pri računanju oblike tega predmeta - + Create Structural System Ustvari konstrukcijski sistem @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Višina (mm) - + Create Component Ustvari komponento @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Stene so lahko osnovane le na delih ali ploskovjih - + Set text position Nastavi položaj besedila - + Category Kategorija - + Key Ključ @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Vrednost - + Unit Enota - + Create IFC properties spreadsheet Ustvari preglednico lastnosti IFC @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Ustvari panelni list - + Facemaker returned an error "Facemaker" je vrnil napako @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Ustvari spojnik - + Precast elements Elementi montažnega betona - + Slab type Tip plošče - + Chamfer Prisekaj - + Dent length Dolžina zoba - + Dent width Širina zoba - + Dent height Višina zoba - + Slab base Osnovna plošča - + Number of holes Število lukenj - + Major diameter of holes Zunanji premer luknje - + Minor diameter of holes Notranji premer luknje - + Spacing between holes Razmak med luknjami - + Number of grooves Število utorov - + Depth of grooves Globina utora - + Height of grooves Višina utora - + Spacing between grooves Razmik med žlebovi - + Number of risers Število višin stopnic - + Length of down floor Dolžina spodnjega nadstropja - + Height of risers Višina stopnice - + Depth of treads Globina pohodne ploskve - + Precast options Možnosti predizdelanosti - + Dents list Seznam zobov - + Add dent Dodaj zob - + Remove dent Odstrani zob - + Slant Poševno - + Level Raven - + Rotation Rotacija - + Offset Odmik @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Spored - + There is no valid object in the selection. Site creation aborted. Med izbranimi predmeti ni noben veljaven. Ustvarjanje lokacije prekinjeno. - + Node Tools Orodja vozlišč - + Reset nodes Ponastavi vozlišča - + Edit nodes Uredi vozlišča - + Extend nodes Podaljšaj vozlišča - + Extends the nodes of this element to reach the nodes of another element Podaljša oglišča tega predmeta do oglišč drugega elementa - + Connect nodes Poveži vozlišča - + Connects nodes of this element with the nodes of another element Stakne oglišča tega predmeta z oglišči drugega predmeta - + Toggle all nodes Preklopi vsa oglišča - + Toggles all structural nodes of the document on/off Vklaplja/izklaplja vsa strukturna vozlišča dokumenta - + Intersection found. Presečišče najdeno. @@ -2486,22 +2511,22 @@ Ustvarjanje lokacije prekinjeno. Vrata - + Hinge Tečaj - + Opening mode Način odpiranja - + Get selected edge Dobi izbrani rob - + Press to retrieve the selected edge Pritisnite da povrnete izbrani rob @@ -2531,17 +2556,17 @@ Ustvarjanje lokacije prekinjeno. Nova plast - + Wall Presets... Prednastavitve stene ... - + Hole wire Črtovje preboja - + Pick selected Izberi izbrano @@ -2626,17 +2651,17 @@ Ustvarjanje lokacije prekinjeno. Predmet nima ploskve - + Space boundaries Prostorske meje - + Error: Unable to modify the base object of this wall Napaka: preoblikovanje tlorisa tega zidu ni mogoče - + Window elements Elementi oken @@ -2748,7 +2773,7 @@ Ustvarjanj stavbe je prekinjeno. Vse v redu! Ni zaznanih težav - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Predmet nima značilke IfcProperties. Prekliči ustvarjanje preglednice za predmet: @@ -2813,10 +2838,9 @@ Ustvarjanj stavbe je prekinjeno. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + V predmet Etaža lahko vstavite vse razen Lokacije, Stavbe in Etaže. +Etaža ne sprejema Lokacije, Stavbe in Etaže, zato bodo ti predmeti izvzeti iz izbora. +To lahko spremenite v nastavitvah. @@ -2931,47 +2955,47 @@ Ustvarjanje etaže prekinjeno. Temu sporedu ni pripete nobene preglednice - + Section plane settings Nastavitve prerezne ravnine - + Objects seen by this section plane: Predmeti, vidni v prerezni ravnini: - + Section plane placement: Umestitev prerezne ravnine: - + Rotate X Zavrti X - + Rotate Y Zavrti Y - + Rotate Z Zavrti Z - + Resize Spremeni velikost - + Center Središče - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3006,77 @@ Ostali predmeti bodo odstranjeni iz izbire. Opomba: To lahko spremenite v možnostih. - + Choose another Structure object: Izberi drugi konstrukcijski predmet: - + The chosen object is not a Structure Izbran predmet ni konstrukcija - + The chosen object has no structural nodes Izbrani predmet nima konstrukcijskih vozlišč - + One of these objects has more than 2 nodes Eden od predmetov ima več kot 2 vozlišči - + Unable to find a suitable intersection point Ni mogoče najti primerno presečiščne točke - + Intersection found. Presečišče najdeno. - + The selected wall contains no subwall to merge Izbrani zid ne vsebuje pod-zidov za združitev - + Cannot compute blocks for wall Ni mogoče izračunavati zidakov za steno - + Choose a face on an existing object or select a preset Izberite ploskev ne obstoječem predmetu ali izberite prednastavitev - + Unable to create component Sestavine ni mogoče ustvariti - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Številka črtovja, ki določa preboj v gostuječem predmetu. Pri vrednosti nič bo samodejno upoštevan najskrajšnejše črtovje - + + default + privzeto - + If this is checked, the default Frame value of this window will be added to the value entered here Če je to označeno, bo privzeta vrednost okvirja tega okna dodana vrednosti, vnešeni tukaj - + If this is checked, the default Offset value of this window will be added to the value entered here Če je to označeno, bo privzeta vrednost odmika tega okna dodana vrednosti, vnešeni tukaj - + pycollada not found, collada support is disabled. pycollada ni bil najdena, podpora za collado je onemogočena. @@ -3092,7 +3116,7 @@ Opomba: To lahko spremenite v možnostih. Napaka: različica knjižnice IfcOpenShell je prestara - + Successfully written Uspešno zapisano @@ -3102,7 +3126,7 @@ Opomba: To lahko spremenite v možnostih. Najdena oblika, ki vsebuje krivulje, triangulacija - + Successfully imported Uspešno uvožen @@ -3112,50 +3136,164 @@ Opomba: To lahko spremenite v možnostih. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + V predmet Stavba lahko vstavite vse razen Lokacije in Stavbe. +Stavba ne sprejema Lokacije in Stavbe, zato bodo ti predmeti izvzeti iz izbora. +To lahko spremenite v nastavitvah. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Odstrani označene predmete z zgornjega seznama - + Add selected Dodaj izbrane - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Dodaj izbrene predmete v območje te presečne ravnine + + + + Rotates the plane along the X axis + Zasuka ravnino okrog osi X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Zasuka ravnino okrog osi Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Zasuka ravnino okrog osi Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Prevelikosti ravnino tako, da se bo prilega predmetom z zgornjega seznama - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Usredini ravnino na predmete z zgornjega seznama - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Prva točka nosilca + + + + Base point of column + Izhodična točka stebra + + + + Next point + Naslednja točka + + + + Structure options + Možnosti konstrukcije + + + + Drawing mode + Risalni način + + + + Beam + Nosilec + + + + Column + Steber + + + + Preset + Privzeto + + + + Switch L/H + Preklopi D/V + + + + Switch L/W + Preklopi D/Š + + + + Con&tinue + &Nadaljuj + + + + First point of wall + Prva točka stene + + + + Wall options + Možnosti stene + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Ta seznam prikazuje vse sestavljene materiale v tem dokumentu. Ustvarite nove za vaše vrste sten. + + + + Alignment + Poravnava + + + + Left + Levo + + + + Right + Desno + + + + Use sketches + Uporabi očrte + + + + Structure + Struktura + + + + Window + Okno + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3369,21 +3507,16 @@ You can change that in the preferences. Checks the selected objects for problems Preveri izbrane predmete za morebitne napake - - - Explore the contents of an IFC file - Razišči vsebino datoteke IFC - Arch_CloneComponent - + Clone component Podvoji sestavino - + Clones an object as an undefined architectural component Podvoji predmet kot neopredeljeno sestavino @@ -3404,12 +3537,12 @@ You can change that in the preferences. Arch_Component - + Component Sestavina - + Creates an undefined architectural component Ustvari neopredeljeno arhitekturno sestavino @@ -3443,14 +3576,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Ograja - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Iz izbranega odseka, stojke in poti ustvari ograjo @@ -3542,23 +3675,15 @@ You can change that in the preferences. Indeksi ploskev katere se skrije - - Arch_IfcExplorer - - - Ifc Explorer - Raziskovalec IFC - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Ustvari preglednico IFC … - + Creates a spreadsheet to store IFC properties of an object. Ustvari preglednico za shranjevanje lastnosti IFC predmeta. @@ -3587,12 +3712,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Združi zidove - + Merges the selected walls, if possible Združi izbrane zidove, če je mogoče @@ -3798,12 +3923,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Presečna ravnina - + Creates a section plane object, including the selected objects Ustvari predmet presečne ravnine, ki vključuje izbrane predmete @@ -3824,12 +3949,12 @@ You can change that in the preferences. Arch_Site - + Site Lokacija - + Creates a site object including selected objects. Ustvari predmet lokacije, ki vključuje izbrane predmete. @@ -3876,12 +4001,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Ustvari predmet konstrukcije od začetka ali iz izbranega predmeta (očrta, črtovje, ploskve ali telesa) @@ -3889,12 +4014,12 @@ You can change that in the preferences. Arch_Survey - + Survey Raziskava - + Starts survey Zažene raziskavo @@ -3902,12 +4027,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Preklopi zastavico pred. z ovojnico IFC - + Force an object to be exported as Brep or not Vsili izvoz predmeta kot predstavitve z ovojnico ali ne @@ -3915,12 +4040,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Predklapljanje podsestavin - + Shows or hides the subcomponents of this object Razkrije ali skrije podsestavine tega predmeta @@ -3941,12 +4066,12 @@ You can change that in the preferences. Arch_Window - + Window Okno - + Creates a window object from a selected object (wire, rectangle or sketch) Ustvari predmet okna iz izbranega predmeta (črtovja, pravokotnika ali očrta) @@ -4217,7 +4342,7 @@ You can change that in the preferences. Draft - + Writing camera position Zapis položaja kamere @@ -4653,7 +4778,7 @@ You can change that in the preferences. Prosojnost: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Nekateri pregledovalniki IFC ne marajo izvoza predmetov kot izriv. Uporabite to, da prisilite izvoz vseh predmetov kot geometrije predstavitve z ovojnico. @@ -4693,7 +4818,7 @@ You can change that in the preferences. Debelina - + Force export as Brep Vsili izvoz kot predstavitev z ovojnico @@ -4723,7 +4848,7 @@ You can change that in the preferences. DAE - + Export options Možnosti izvoza @@ -4933,22 +5058,22 @@ You can change that in the preferences. Dovoli štirik. ploskve - + Use triangulation options set in the DAE options page Uporabi niz možnosti triangulacije na strani možnosti DAE - + Use DAE triangulation options Uporabi možnosti triangulacije DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Ukrivljene oblike, ki jih v IFC-ju ni mogoče predstaviti kot krivulje, se razgradijo v ravne ploskve. Če je to označeno, se izvede dodatni izračun za spojitev koplanarnih ploskev. - + Join coplanar facets when triangulating Spoji koplanarne ploskve ob triagulaciji @@ -4988,12 +5113,12 @@ You can change that in the preferences. Uvozi lastnosti IFC v preglednico - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Pri izvažanju predmetov brez splošnega razpoznavnega znaka (UID), bo ta ustvarjen in shranjen med predmete FreeCAD za pouporabo ob naslednjem izvažanju, zaradi česar pride do manjših odstopanj med različicami - + Store IFC universal ID in FreeCAD objects Shrani splošni razpoznavni znak (UID) IFC v FreeCADove predmete @@ -5063,17 +5188,17 @@ You can change that in the preferences. Razcepi večplastne stene - + Warning, experimental feature! Pozor, preizkusna zmožnost! - + Use IfcOpenShell serializer if available Če je na voljo, uporabi nizalnik zaporedih IfcOpenShell - + Export 2D objects as IfcAnnotations Izvozi dvorazsežne predmete kot IfcAnnotations @@ -5098,12 +5223,12 @@ You can change that in the preferences. Med uvažanje prilagodi pogled - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Če je to označeno, bodo vse lastnosti predmeta FreeCAD zapisane v izvoženih predmetih, kar pri ponovnem uvozu omogoča poustvarjenje polno nastavljivega modela. - + Export full FreeCAD parametric model Izvozi polno nastavljiv oblikovanec FreeCAD @@ -5158,59 +5283,59 @@ You can change that in the preferences. Izvzemi seznam: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Če je to označeno, bodo podobne enote, kadar je to mogoče, v datoteki uporabljene le enkrat. To lahko precej zmanjša velikost datoteke, vendar bo zaradi tega ljudem težje berljiva - + Reuse similar entities Ponovno uporabi podobne subjekte - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Ko je mogoče, so predmeti IFC, ki so izrivani pravokotniki, izvoženi kot IfcRectangleProfileDef. Neglede na to, imajo nekatiri programi razvpite težave pri uvažanju te enote. Če se vam to zgodi, lahko takšno izvažanje onemogočite tukaj (vsi prerezi bodo izvoženi kot IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Onemogoči IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Nastavi za privzeto lastnost "Premakni podlogo" na Drži IFC version - IFC version + Različica IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + Z različico IFC se spremeni podprtost različnih značilk in izdelkov IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Prostori Line style: - Line style: + Slog črte: @@ -5220,17 +5345,17 @@ You can change that in the preferences. Dashed - Dashed + Črtkano Dotted - Dotted + Pikčasto Dashdot - Dashdot + Črtopična @@ -5238,14 +5363,49 @@ You can change that in the preferences. Barva črt - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Nekater IFC gradniki, kot npr. IfcWall ali IfcBeam, imajo posebne osnovne različice, kot sta IfcWallStandardCase ali IfcBeamStandardCase. Če je ta možnost vključena, bodo taki predmeti iz FreeCADA samodejno izvoženi kot osnovni primeri, če je potrebnim pogojem zadoščeno. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.qm b/src/Mod/Arch/Resources/translations/Arch_sr.qm index f092abb9c2..d8eb645ed2 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr.qm and b/src/Mod/Arch/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 69120c194c..7907f3a9ce 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -44,12 +44,12 @@ Објекат чији је ова компонента клон - + Other shapes that are appended to this object Други облици који су додати овом објекту - + Other shapes that are subtracted from this object Други облици који cу одузети од овог објекта @@ -79,7 +79,7 @@ Површина свих вертикалних страна овог објекта - + The area of the projection of this object onto the XY plane Површина пројекције овог објекта у XY равни @@ -114,7 +114,7 @@ Израчуната површина пода овог спрата - + The placement of this object Положај овог објекта @@ -144,12 +144,12 @@ The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -194,22 +194,22 @@ The area of this panel - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Компоненте @@ -1717,12 +1742,12 @@ Креирај осу - + Remove Obriši - + Add Додај @@ -1832,87 +1857,87 @@ Поглед на - + Create Section Plane Направи деобну раван - + Create Site Направи Локацију - + Create Structure Направи структуру - + Create Wall Направи зид - + Width Ширина - + Height Висина - + Error: Invalid base object Грешка:Неважећи базни објекат - + This mesh is an invalid solid Ова мрежа је неважеће чвcто тело - + Create Window Креирај прозор - + Edit Измени - + Create/update component Креирај / Ажурирај компоненту - + Base 2D object Базни 2D објекат - + Wires Жице - + Create new component Направи нову компоненту - + Name Име - + Type Тип - + Thickness Дебљина @@ -1922,7 +1947,7 @@ Грешка:Није могуће утврдити начин кодирања cимбола - + file %s successfully created. %s датотека је успешно креирана. @@ -1972,32 +1997,32 @@ Направи степенице - + Length Дужина - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Ниcам уcпео прорачунати облик - + Merge Wall Cпоји Зид - + Please select only wall objects Молим одаберите cамо зидове - + Merge Walls Cпоји Зидове @@ -2012,7 +2037,7 @@ Грешка израчунавања облика овог објекта - + Create Structural System Направи Cтруктурни Cиcтем @@ -2173,7 +2198,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Виcина (mm) - + Create Component Create Component @@ -2188,17 +2213,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Подесите положај текста - + Category Категорија - + Key кључ @@ -2208,12 +2233,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Вредност - + Unit Јединица - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2243,7 +2268,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2268,137 +2293,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Обори - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset Померај @@ -2423,59 +2448,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2487,22 +2512,22 @@ Site creation aborted. Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2532,17 +2557,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2627,17 +2652,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2749,7 +2774,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2932,47 +2957,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Центар - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2983,77 +3008,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3093,7 +3118,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3103,7 +3128,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3119,45 +3144,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Лево + + + + Right + Деcно + + + + Use sketches + Use sketches + + + + Structure + Конструкција + + + + Window + Прозори + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3370,21 +3510,16 @@ You can change that in the preferences. Checks the selected objects for problems Проверава да ли има проблема на одабраним објектима - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3405,12 +3540,12 @@ You can change that in the preferences. Arch_Component - + Component Компонента - + Creates an undefined architectural component Прави недефиниcану архитектонcку компоненту @@ -3444,12 +3579,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3543,23 +3678,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Иcтраживач - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3588,12 +3715,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Cпоји Зидове - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3799,12 +3926,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3825,12 +3952,12 @@ You can change that in the preferences. Arch_Site - + Site Страница - + Creates a site object including selected objects. Креирај објекат странице уклјучујући одабрани објекат. @@ -3877,12 +4004,12 @@ You can change that in the preferences. Arch_Structure - + Structure Конструкција - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Прави конструкцију објекта од почетка или од одабраног објекта (цртежа, жице, површине или тела) @@ -3890,12 +4017,12 @@ You can change that in the preferences. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -3903,12 +4030,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3916,12 +4043,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3942,12 +4069,12 @@ You can change that in the preferences. Arch_Window - + Window Прозори - + Creates a window object from a selected object (wire, rectangle or sketch) Прави прозор објекта од почетка или од одабраног објекта (жице, ректангла или цртежа) @@ -4218,7 +4345,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4654,7 +4781,7 @@ You can change that in the preferences. Prozirnost: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4694,7 +4821,7 @@ You can change that in the preferences. Дебљина - + Force export as Brep Force export as Brep @@ -4724,7 +4851,7 @@ You can change that in the preferences. DAE - + Export options Export options @@ -4934,22 +5061,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4989,12 +5116,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5064,17 +5191,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5099,12 +5226,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5159,22 +5286,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5239,14 +5366,49 @@ You can change that in the preferences. Line color - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm index 5760bddde9..cd20bb6876 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm and b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index 35d3aa92e7..34351ba550 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -44,12 +44,12 @@ Det objekt som denna komponent klonar - + Other shapes that are appended to this object Andra former som bifogas till detta objekt - + Other shapes that are subtracted from this object Andra former som subtraheras från det här objektet @@ -79,7 +79,7 @@ The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -114,7 +114,7 @@ Den beräknade golvytan i denna våning - + The placement of this object Placeringen av detta objektet @@ -144,12 +144,12 @@ The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -194,22 +194,22 @@ Arean av denna panel - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object Det länkade objektet - + The line width of the rendered objects The line width of the rendered objects @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site The base terrain of this site - + The postal or zip code of this site The postal or zip code of this site - + The city of this site The city of this site - + The country of this site The country of this site - + The latitude of this site The latitude of this site - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain The perimeter length of this terrain - + The volume of earth to be added to this terrain The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text Färgen på områdestexten - + The size of the text font Storleken på typnittet - + The size of the first line of text Storleken på den första raden av text - + The space between the lines of text Avståndet mellan textraderna - + The position of the text. Leave (0,0,0) for automatic position Placeringen av texten. Lämna (0,0,0) för automatisk positionering - + The justification of the text Textens radutjämning - + The number of decimals to use for calculated texts Antal decimaler i beräkningar - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ Listan över lagertjocklekar - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Komponenter @@ -1717,12 +1742,12 @@ Skapa axel - + Remove Ta bort - + Add Lägg till @@ -1832,87 +1857,87 @@ Vy över - + Create Section Plane Skapa snittplan - + Create Site Skapa plats - + Create Structure Skapa struktur - + Create Wall Skapa vägg - + Width Bredd - + Height Höjd - + Error: Invalid base object Fel: Ogiltigt basobjekt - + This mesh is an invalid solid Detta nät är en ogiltig solid - + Create Window Skapa fönster - + Edit Redigera - + Create/update component Skapa eller uppdatera komponent - + Base 2D object 2D basobjekt - + Wires Trådar - + Create new component Skapa ny komponent - + Name Namn - + Type Typ - + Thickness Tjocklek @@ -1922,7 +1947,7 @@ Fel: Kunde inte avgöra teckenkodning - + file %s successfully created. filen %s har skapats. @@ -1972,32 +1997,32 @@ Skapa trappor - + Length Längd - + Error: The base shape couldn't be extruded along this tool object Fel: Grundformen kunde inte extruderas eller svepas längs detta verktygsobjekt - + Couldn't compute a shape En form kunde inte beräknas - + Merge Wall Sammanfoga vägg - + Please select only wall objects Var god välj endast godsobjekt - + Merge Walls Sammanfoga väggar @@ -2012,7 +2037,7 @@ Fel vid beräkning av formen på detta objekt - + Create Structural System Skapa Strukturellt System @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Höjd (mm) - + Create Component Skapa komponent @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Ange textens placering - + Category Kategori - + Key Nyckel @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Värde - + Unit Enhet - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Fasa - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Antal hål - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Nivå - + Rotation Rotation - + Offset Offset @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schema - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Återställ noder - + Edit nodes Redigera noder - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Anslut noder - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Växla alla noder - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. Dörr - + Hinge Gångjärn - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. Allt bra! inga problem hittades - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Mitten - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Vänster + + + + Right + Höger + + + + Use sketches + Use sketches + + + + Structure + Struktur + + + + Window + Fönster + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Kontrollerar de markerade objekten efter problem - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Komponent - + Creates an undefined architectural component Skapar en odefinierad arkitekturkomponent @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - IFC-Utforskare - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Sammanfoga väggar - + Merges the selected walls, if possible Sammanfogar de markerade väggarna, om möjligt @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Sektionsplan - + Creates a section plane object, including the selected objects Skapar ett avsnitt plan objekt, inklusive de markerade objekten @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Plats - + Creates a site object including selected objects. Skapar ett platsobjekt inkluderande valda objekt. @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Struktur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Skapar ett strukturobjekt från början eller från ett markerat objekt (skiss, tråd, yta eller solid) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Enkät - + Starts survey Påbörjar enkät @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Aktivera eller deaktivera IFC Brep-flaggan - + Force an object to be exported as Brep or not Tvingar ett objekt till att exporteras som Brep om vald @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Fönster - + Creates a window object from a selected object (wire, rectangle or sketch) Skapar ett fönster-objekt från ett markerat objekt (tråd, rektangel eller skiss) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Skriver kamerans position @@ -4653,7 +4780,7 @@ You can change that in the preferences. Transparens: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Vissa IFC-förhandsgranskare uppskattar inte när objekt exporteras som extrusioner. Använd detta alternativ för att tvinga alla objekt till att exporteras som BREP-geometri. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Tjocklek - + Force export as Brep Tvinga export som Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Alternativ för export @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Linjefärg - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index c8df52c350..276f1f9300 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index 48dc4d5d93..bdf6a7e213 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -44,12 +44,12 @@ Bu bileşenin klonladığı nesne - + Other shapes that are appended to this object Bu nesneye eklenen diğer şekiller - + Other shapes that are subtracted from this object Bu nesneden çıkartılan diğer şekiller @@ -79,7 +79,7 @@ Bu nesnenin tüm dikey yüzler alanları - + The area of the projection of this object onto the XY plane Bu nesnenin XY düzlemindeki izdüşümünün alanı @@ -114,7 +114,7 @@ Bu katın hesaplanan kat alanı - + The placement of this object Bu nesnenin yerleşimi @@ -144,12 +144,12 @@ Profilin ekstrüzyon ekseni etrafında rotasyonu - + The length of this element, if not based on a profile Bu öğenin uzunluğu, eğer profil esaslı değilse - + The width of this element, if not based on a profile Bu öğenin genişliği, eğer profil esaslı değilse @@ -194,22 +194,22 @@ Bu panelin alanı - + The facemaker type to use to build the profile of this object Bu nesnenin profili oluşturmak için kullanılacak facemaker türü - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Bu objenin bormal ekstrüzyon yönü ( Otomatik tanımlamak için (0,0,0) olarak ayarlayın) - + The linked object Bağlantı - + The line width of the rendered objects Render edilen objenin çizgi kalınlığı @@ -349,7 +349,7 @@ Bu çizginin uzunluğu - + The structural nodes of this element Bu öğenin yapısal düğümleri @@ -614,132 +614,132 @@ Sonuçlarını yazdırmak için elektronik tablo - + If false, non-solids will be cut too, with possible wrong results. Yanlış'sa, katı olmayan olası yanlış sonuçlar ile de kesecek. - + The display length of this section plane Kesit düzlemin ekran boyutu - + The display height of this section plane Kesit düzlemin ekran boyutu - + The size of the arrows of this section plane Bu kesit düzleminin oklarının boyutu - + Show the cut in the 3D view Kesmeyi 3D görünümde gösterin - + The rendering mode to use Kullanılacak işleme modu - + If cut geometry is shown or not Kesme geometrisi gösterilse veya gösterilmezse - + If cut geometry is filled or not Kesim geometrisi doldurulmuş veya doldurulmamışsa - + The size of the texts inside this object Bu nesnenin içindeki metinlerin boyutu - + If checked, source objects are displayed regardless of being visible in the 3D model İşaretlenirse, görünür olmasına bakılmaksızın kaynak nesneler 3D modelde görüntülenir - + The base terrain of this site Bu sitenin temel arazisi - + The postal or zip code of this site Bu sitenin posta veya posta kodu - + The city of this site Bu sitenin şehri - + The country of this site Bu sitenin ülkesi - + The latitude of this site Bu sitenin bölgesi - + Angle between the true North and the North direction in this document Bu dokümandaki gerçek Kuzey ile Kuzey yönü arasındaki açı - + The elevation of level 0 of this site Bu sitenin 0. seviye yüksekliği - + The perimeter length of this terrain Bu arazinin çevre uzunluğu - + The volume of earth to be added to this terrain Bu araziye eklenecek toprak hacmi - + The volume of earth to be removed from this terrain Bu araziden çıkarılacak toprak hacmi - + An extrusion vector to use when performing boolean operations Boolean işlemleri gerçekleştirirken kullanılacak bir ekstrüzyon vektörü - + Remove splitters from the resulting shape Oluşan şekildeki kırıntıları temizleyin - + Show solar diagram or not Güneş diyagramını gösterin ya da göstermeyin - + The scale of the solar diagram Güneş diyagramının ölçeği - + The position of the solar diagram Güneş diyagramının konumu - + The color of the solar diagram Güneş diyagramının rengi @@ -785,81 +785,76 @@ - A zone this space is part of - Bu alanın bir parçası olan bir bölge - - - The number of people who typically occupy this space Bu alanı tipik olarak kullanan insanların sayısı - + The electric power needed to light this space in Watts Bu ekipmanın Watt cinsinden elektrik tüketimi - + The electric power needed by the equipment of this space in Watts Bu ekipmanın Watt cinsinden elektrik tüketimi - + If True, Equipment Power will be automatically filled by the equipment included in this space Doğruysa Ekipman Gücü otomatik olarak bu alana dahil olan ekipman tarafından doldurulacaktır - + The type of air conditioning of this space Klima bu alanı türü - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Göstermek için metin. $area, $label, $tag, $floor, $walls, $ceiling ilgili veri eklemek için kullanın - + The name of the font Yazı tipinin adını - + The color of the area text Etiket yazısının rengi - + The size of the text font Etiket yazısının boyutu - + The size of the first line of text Metnin ilk satırının boyutu - + The space between the lines of text Metin satırları arasındaki boşluk - + The position of the text. Leave (0,0,0) for automatic position Etiket metin konumu. (0,0,0) için otomatik Merkezi konumunu korumak - + The justification of the text Metni bloklama - + The number of decimals to use for calculated texts İçin hesaplanan metin kullanmak için ondalık basamak sayısı - + Show the unit suffix Birim son eki @@ -939,102 +934,102 @@ Merdivenlerden kenarlığı ve yapı arasındaki uzaklık - + An optional extrusion path for this element Bu öğe için bir isteğe bağlı ekstrüzyon yolu - + The height or extrusion depth of this element. Keep 0 for automatic Bu öğenin yüksekliği veya ekstrüzyon derinliği. Otomatik olarak 0 tutun - + A description of the standard profile this element is based upon Bu öğe üzerine kuruludur standart profil açıklaması - + Offset distance between the centerline and the nodes line Merkez ile düğümleri çizgi arasındaki uzaklık ofset - + If the nodes are visible or not Düğümler görünür Eğer ya da - + The width of the nodes line Düğümleri çizginin genişliğini - + The size of the node points Çıkıntı boyutu - + The color of the nodes line Düğümleri çizginin genişliğini - + The type of structural node Yapısal düğüm türü - + Axes systems this structure is built on Bu yapı için eksen sistemlerini oluştur - + The element numbers to exclude when this structure is based on axes Bu yapı eksenlere dayandığında eleman numaralarını dışlamak için - + If true the element are aligned with axes True ise öğe hizalanır Ateşlerle - + The length of this wall. Not used if this wall is based on an underlying object Bu duvarın uzunluğu. Bu duvar bir alttaki nesne üzerinde dayalıysa kullanılmaz - + The width of this wall. Not used if this wall is based on a face Bu çeper genişliği. Bu çeper bir yüzü temel alıyorsa kullanılamaz - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Çeper yüksekliği. Otomatik ayar için 0 (Sıfır) yapın. Bu çeper bir katıyı temel alıyorsa kullanılamaz - + The alignment of this wall on its base object, if applicable Varsa, bu duvarın taban nesnesindeki hizalaması - + The face number of the base object used to build this wall Bu duvarı oluşturmak için kullanılan temel nesnenin yüz numarası - + The offset between this wall and its baseline (only for left and right alignments) Bu duvar ile taban çizgisi arasındaki uzaklık (yalnızca sol ve sağ hizalamalar için) - + The normal direction of this window Bu pencerenin normal yönü - + The area of this window Bu pencerenin alanı @@ -1049,7 +1044,7 @@ Yükseltme önce profile eklemek için isteğe bağlı bir ek yerleştirme - + Opens the subcomponents that have a hinge defined Tanımlanan bir menteşe var olan alt bileşenlerini açar @@ -1089,12 +1084,12 @@ Katman kalınlıklarının listesi - + The line color of the projected objects Yansıtılan nesnelerin rengi - + The color of the cut faces (if turned on) Kesme renk (açık değilse) karşı karşıya @@ -1104,7 +1099,7 @@ Yukarıdaki basamakları alt stringers örtüşme - + The number of the wire that defines the hole. A value of 0 means automatic Delik tanımlar tel sayısı. 0 değeri, otomatik anlamına gelir @@ -1194,7 +1189,7 @@ Inşaat demirinin özel aralığı - + Shape of rebar Inşaat demirinin şekli @@ -1204,17 +1199,17 @@ Yanlış gidiyorsanız çatı yönünü çevirin - + Shows plan opening symbols if available Varsa, plan açılış sembollerini gösterir - + Show elevation opening symbols if available Mümkünse yükseltme simgelerini aç - + The objects that host this window Bu pencere ana nesneleri @@ -1269,12 +1264,12 @@ Bu seviyenin (0,0,0) noktasının seviyesi - + The shape of this object Bu nesnenin şekli - + The line width of this object Bu nesnenin çizgi genişliği @@ -1414,47 +1409,47 @@ Doğruysa, bağlı dosyadaki renkler güncellenir - + The objects that must be considered by this section plane. Empty means the whole document. Bu seçim düzlemi tarafından dikkate alınması gereken nesneler. Boş, tüm belgeyi ifade eder. - + The transparency of this object Bu nesnenin saydamlığı - + The color of this object Bu nesnenin rengi - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Kesim düzlemiyle gerçek kesim arasındaki uzaklık (bu değeri sıfır olmayan çok küçük değerde tutun) - + The street and house number of this site, with postal box or apartment number if needed Bu Mevkinin sokak ve ev numarası, gerekirse posta kutusu veya daire numarası - + The region, province or county of this site Bu Mevkideki bölge, il veya ilçe - + A url that shows this site in a mapping website Bu yerin bir haritalama sitesindeki bağlantısı - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Model (0,0,0) orijin ve jeokoordinatlarla belirtilen nokta arasının isteğe bağlı ötelemesi - + Specifies if this space is internal or external Bu alanın dahili mi yoksa harici mı olduğunu belirtir @@ -1504,182 +1499,182 @@ Tüm Merdiven parçalarının 'sol konturu' - + Enable this to make the wall generate blocks Bloklar oluşturan duvarlar yapabilmek için bunu açın - + The length of each block Her bloğun uzunluğu - + The height of each block Her bloğun yüksekliği - + The horizontal offset of the first line of blocks İlk blok hattının yatay yer değiştirmesi - + The horizontal offset of the second line of blocks İkinci blok hattının yatay yer değiştirmesi - + The size of the joints between each block Her bir blok arasındaki bağlantının boyutu - + The number of entire blocks Sağlam blok sayısı - + The number of broken blocks Bozuk blok sayısı - + The components of this window Bu pencerenin bileşenleri - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Bu pencerenin ana bilgisayar nesnesinde oluşturduğu deliğin derinliği. 0 ise, değer otomatik olarak hesaplanacaktır. - + An optional object that defines a volume to be subtracted from hosts of this window Bu pencerenin bulunduğu gövdeden çıkarılacak hacmi tanımlayan isteğe bağlı bir nesne - + The width of this window Bu pencerenin genişliği - + The height of this window Bu pencerenin yüksekliği - + The preset number this window is based on Bu pencerenin önceden ayarlanmış numarası - + The frame size of this window Bu pencerenin çerçeve boyutu - + The offset size of this window Bu pencerenin öteleme mesafesi - + The width of louvre elements Panjurlu pencere elemanların genişliği - + The space between louvre elements Panjurlu pencere elemanları arasındaki boşluk - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Deliği tanımlayan telin numarası. 0 ise, değer otomatik olarak hesaplanacaktır Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Bu nesnenin kendisi yerine temel noktasının hareket edeceğini belirtir A single section of the fence - A single section of the fence + Çit yapısının tek bir bölümü A single fence post - A single fence post + Çit yapısının tek bir direği The Path the fence should follow - The Path the fence should follow + Çit yapısının takip etmesi gereken yol The number of sections the fence is built of - The number of sections the fence is built of + Çit yapısını oluşturan bölümlerin sayısı The number of posts used to build the fence - The number of posts used to build the fence + Çit yapısını oluşturan direklerin sayısı - + The type of this object - The type of this object + Bu nesnenin tipi IFC data - IFC data + IFC verisi IFC properties of this object - IFC properties of this object + Bu nesnenin IFC özellikleri - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. + Eğer Doğru ise ortaya çıkacak olan görünümler bölüm düzlemine göre kırpılır. - + If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Eğer Doğru ise kesit alanlarını doldurmak için nesne materyal renkleri kullanılacaktır. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + 'Gerçek Kuzey'e ayarlandığında bütün geometri bu portalın gerçek kuzeyine göre döndürülecektir - + + Show compass or not + Pusulayı göster veya gösterme + + + + The rotation of the Compass relative to the Site + Portal'a göre pusulanın dönmesi + + + + The position of the Compass relative to the Site placement + Portal yerleşimine göre pusula pozisyonu + + + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Bileşenler @@ -1717,12 +1742,12 @@ Eksen Oluştur - + Remove Kaldır - + Add Ekle @@ -1832,87 +1857,87 @@ Görünümü - + Create Section Plane Kesit Düzlem Oluşturma - + Create Site Konum Oluştur - + Create Structure Yapı Oluştur - + Create Wall Çeper Oluştur - + Width Genişlik - + Height Yükseklik - + Error: Invalid base object Hata: Geçersiz temel nesne - + This mesh is an invalid solid Geçersiz bir katı model Mesh'i - + Create Window Pencere oluşturma - + Edit Düzenle - + Create/update component Oluştur/Güncelleştir bileşeni - + Base 2D object Temel 2D nesne - + Wires Teller - + Create new component Yeni bileşen oluştur - + Name Isim - + Type Türü - + Thickness Kalınlık @@ -1922,7 +1947,7 @@ Hata: karakter kodlaması belirlenemedi - + file %s successfully created. Dosya %s başarıyla oluşturuldu. @@ -1972,32 +1997,32 @@ Merdiven oluştur - + Length Uzunluk - + Error: The base shape couldn't be extruded along this tool object Hata: Temel şekli bu aracı nesneyi kalıptan çekilmiş olamaz - + Couldn't compute a shape Bir şekil hesaplanamadi - + Merge Wall Duvar birleştirme - + Please select only wall objects Lütfen sadece duvar nesneleri seçiniz - + Merge Walls Duvar birleştirme @@ -2012,7 +2037,7 @@ Bu nesnenin şeklini bilgi işlem hatası - + Create Structural System Yapısal sistemi oluşturmak @@ -2162,7 +2187,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Yükseklik (mm) - + Create Component Bileşen oluştur @@ -2177,17 +2202,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Duvarlar yalnızca kısmen ya da kafes nesneler üzerinde temel alabilir - + Set text position Metin konumunu ayarla - + Category Kategori - + Key Anahtar @@ -2197,12 +2222,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Değer - + Unit Birim - + Create IFC properties spreadsheet IFC özellikleri hesap tablosu oluştur @@ -2232,7 +2257,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Çeper Oluştur - + Facemaker returned an error Facemaker bir hata döndürdü @@ -2257,137 +2282,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Bağlayıcı oluştur - + Precast elements Prekast elemanlar - + Slab type Levha türü - + Chamfer Pah kır - + Dent length Dent uzunluğu - + Dent width Çizgi Kalınlığı - + Dent height Dent yüksekliği - + Slab base Levha Bankası - + Number of holes Delik sayısı - + Major diameter of holes Büyük delik çapi - + Minor diameter of holes Küçük delik çapı - + Spacing between holes Düğümler arasındaki uzaklık - + Number of grooves Oluk sayısı - + Depth of grooves Oluk derinliği - + Height of grooves Oluk yüksekliği - + Spacing between grooves Düğümler arasındaki uzaklık - + Number of risers Kullanıcı Sayısı - + Length of down floor Aşağı kat uzunluğu - + Height of risers Satır yüksekliği - + Depth of treads Alan Derinliği - + Precast options Prekast seçenekleri - + Dents list Ezik listesi - + Add dent Dent Ekle - + Remove dent Dent kaldırmak - + Slant Eğim - + Level Seviye - + Rotation Dönüş - + Offset Uzaklaşma @@ -2412,58 +2437,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Zamanlama - + There is no valid object in the selection. Site creation aborted. Seçimdeki geçerli nesne yok orada. Site oluşturma iptal edildi. - + Node Tools Düğüm araçları - + Reset nodes Düğümleri Sıfırla - + Edit nodes Düğümü düzenle - + Extend nodes Düğümleri genişletmek - + Extends the nodes of this element to reach the nodes of another element Başka bir öğe düğümlerinin ulaşmak için bu öğe düğümlerinin genişletir - + Connect nodes Düğümlerini bağlamak - + Connects nodes of this element with the nodes of another element Başka bir öğe düğümlerinin ulaşmak için bu öğe düğümlerinin genişletir - + Toggle all nodes Tüm nesneleri değiştir - + Toggles all structural nodes of the document on/off Açma/kapama belgenin tüm yapısal düğümlerini geçiş yapar - + Intersection found. Kesişim bulundu. @@ -2475,22 +2500,22 @@ Site creation aborted. Kapı - + Hinge Menteşe - + Opening mode Açılış modu - + Get selected edge Seçili kenarı al - + Press to retrieve the selected edge Seçili kenarına almak için tuşuna basın @@ -2520,17 +2545,17 @@ Site creation aborted. Yeni katman - + Wall Presets... Duvar hazır ayarları... - + Hole wire Delik tel - + Pick selected Seçilen çekme @@ -2615,17 +2640,17 @@ Site creation aborted. Bu nesne bir yüzü yok - + Space boundaries Alanı sınırları - + Error: Unable to modify the base object of this wall Hata: Bu duvarın temel nesne değiştirilemiyor - + Window elements Pencere öğeleri @@ -2737,7 +2762,7 @@ Yapı oluşturma işlemi iptal edildi. Her şey yolunda! hiçbir sorun bulunamadı - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Nesnede bir IfcProperties özelliği yoktur. E-tablo oluşturmak için iptal edilecek Nesne: @@ -2920,47 +2945,47 @@ Zemin oluşturma işlemi iptal edildi. Bu plana eklenmiş bir hesap tablosu yok - + Section plane settings Seçim düzlemi ayarları - + Objects seen by this section plane: Bu seçim düzlemi tarafından görülen nesneler: - + Section plane placement: Seçim düzlemi yerleşimi: - + Rotate X Döndür X - + Rotate Y Döndür Y - + Rotate Z Döndür Z - + Resize Yeniden boyutlandır - + Center Ortala - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2971,77 +2996,77 @@ Diğer nesneler seçimden kaldırılacak. Not: Bunu tercihlerde değiştirebilirsiniz. - + Choose another Structure object: Başka bir Yapı nesnesi seçin: - + The chosen object is not a Structure Seçilen nesne bir Yapı değildir - + The chosen object has no structural nodes Seçilen nesnenin yapısal düğümleri yok - + One of these objects has more than 2 nodes Bu nesnelerden biri 2'den fazla düğüm içerir - + Unable to find a suitable intersection point Uygun bir kesişme noktası bulunamıyor - + Intersection found. Kesişim bulundu. - + The selected wall contains no subwall to merge Seçilen duvar birleştirme için bir alt duvar içermiyor - + Cannot compute blocks for wall Duvar blokları hesaplanamaz - + Choose a face on an existing object or select a preset Varolan bir nesne üzerinde bir yüzey seçin veya bir ön ayar seçin - + Unable to create component Bileşen oluşturulamadı - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ana nesnedeki bir deliği tanımlayan telin sayısı. Sıfır değeri otomatik olarak en geniş teli kabul edecektir - + + default + varsayılan - + If this is checked, the default Frame value of this window will be added to the value entered here Bu işaretliyse, bu pencerenin varsayılan Çerçeve değeri buraya girilen değere eklenecektir - + If this is checked, the default Offset value of this window will be added to the value entered here Bu işaretliyse, bu pencerenin varsayılan öteleme değeri buraya girilen değere eklenecektir - + pycollada not found, collada support is disabled. pycollada bulunamadı, collada desteği devre dışı bırakıldı. @@ -3081,7 +3106,7 @@ Not: Bunu tercihlerde değiştirebilirsiniz. Hata: Sizin IfcOpenShell sürümünüz çok eski - + Successfully written Başarıyla yazıldı @@ -3091,7 +3116,7 @@ Not: Bunu tercihlerde değiştirebilirsiniz. Eğrileri içeren bir şekil bulundu, Üçgen - + Successfully imported Başarıyla ithal edildi @@ -3107,45 +3132,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Seçileni ekle - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + Işının ilk noktası + + + + Base point of column + Bir kolonun temel noktası + + + + Next point + Bir sonraki nokta + + + + Structure options + Yapısal seçenekler + + + + Drawing mode + Çizim modu + + + + Beam + Işın + + + + Column + Kolon + + + + Preset + Ön ayar + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + Duvar'ın ilk noktası + + + + Wall options + Duvar seçenekleri + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Sol + + + + Right + Sağ + + + + Use sketches + Eskizleri kullan + + + + Structure + Yapı + + + + Window + Pencere + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3358,21 +3498,16 @@ You can change that in the preferences. Checks the selected objects for problems Seçili nesneler için sorunları denetler - - - Explore the contents of an IFC file - Bir IFC dosyasının içeriğini keşfedin - Arch_CloneComponent - + Clone component Temel bileşen - + Clones an object as an undefined architectural component Bir nesne tanımlanmamış bir mimari bileşeni klonlar @@ -3393,12 +3528,12 @@ You can change that in the preferences. Arch_Component - + Component Bileşen - + Creates an undefined architectural component Bir nesne tanımlanmamış bir mimari bileşeni klonlar @@ -3432,12 +3567,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3531,23 +3666,15 @@ You can change that in the preferences. Gizlemek için yüzleri endeksleri - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFC hesap tablosu oluştur... - + Creates a spreadsheet to store IFC properties of an object. Bir nesnenin IFC özelliklerini depolamak için bir hesap tablosu oluşturur. @@ -3576,12 +3703,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Duvar birleştirme - + Merges the selected walls, if possible Seçili duvarlar, mümkünse birleştirir @@ -3787,12 +3914,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Bölüm düzlemi - + Creates a section plane object, including the selected objects Seçili nesneleri de dahil olmak üzere bir bölüm uçak nesnesi oluşturur @@ -3813,12 +3940,12 @@ You can change that in the preferences. Arch_Site - + Site Alan - + Creates a site object including selected objects. Bir alan nesnesini seçili nesneleri içerecek şekilde oluşturur. @@ -3865,12 +3992,12 @@ You can change that in the preferences. Arch_Structure - + Structure Yapı - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Bir yapı nesnesini sıfırdan veya seçilmiş bir nesneden (çizim, çizgi, yüz veya katı cisim) oluşturur @@ -3878,12 +4005,12 @@ You can change that in the preferences. Arch_Survey - + Survey Anket - + Starts survey Başlar anket @@ -3891,12 +4018,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag İki durumlu IFC Brep bayrak - + Force an object to be exported as Brep or not Bir nesne ya da Brep verilecek zorlamak @@ -3904,12 +4031,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents İki durumlu alt bileşenleri - + Shows or hides the subcomponents of this object Gösterir veya gizler, bu nesnenin alt bileşenleri @@ -3930,12 +4057,12 @@ You can change that in the preferences. Arch_Window - + Window Pencere - + Creates a window object from a selected object (wire, rectangle or sketch) Seçilen bir nesneden (Tel, dikdörtgen veya kroki) bir window nesnesi oluşturur @@ -4206,7 +4333,7 @@ You can change that in the preferences. Draft - + Writing camera position Yazma kamera konumu @@ -4642,7 +4769,7 @@ You can change that in the preferences. Şeffaflık: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Bazı IFC izleyiciler ekstrüzyon dışa aktarılan nesneleri hoşuma gitmiyor. Bu BREP geometri olarak verilecek tüm nesneleri zorunlu tutmak için kullanılır. @@ -4682,7 +4809,7 @@ You can change that in the preferences. Kalınlık - + Force export as Brep Güç verme Brep olarak @@ -4712,7 +4839,7 @@ You can change that in the preferences. DAE - + Export options Dışa aktarım seçenekleri @@ -4922,22 +5049,22 @@ You can change that in the preferences. Dörtlü izin - + Use triangulation options set in the DAE options page DAE seçenekler sayfasında küme çapraz Kur seçenekleri kullanın - + Use DAE triangulation options DAE üç taraflı kur çevrimi seçenekleri kullanın - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. IFC eğrilerinde olarak temsil edilemeyen eğri şekiller düz esaslarını ayrılmış. Seçiliyse, bazı ek hesaplama koplanar esaslarını katılmak için yapılır. - + Join coplanar facets when triangulating Ne zaman nirengi koplanar esaslarını katılmak @@ -4977,12 +5104,12 @@ You can change that in the preferences. Hesap Tablosundaki Ifc Özelliklerini İçe Aktar - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Ne zaman verme nesneleri UID yeniden sonraki süre için bu nesne oluşturulan UID-ecek var olmak stok içinde FreeCAD nesne, sürümler arasında küçük farklar veren verilir - + Store IFC universal ID in FreeCAD objects FreeCAD nesneleri IFC evrensel kimliğini saklamak @@ -5052,17 +5179,17 @@ You can change that in the preferences. Split çok katmanlı duvarlar - + Warning, experimental feature! Uyarı, deneysel özellik! - + Use IfcOpenShell serializer if available IfcOpenShell seri hale getirici varsa kullanır - + Export 2D objects as IfcAnnotations 2D nesneleri IfcAnnotations vermek @@ -5087,12 +5214,12 @@ You can change that in the preferences. İçe aktarırken görünümü sığdır - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Seçiliyse, tüm FreeCAD nesne özelliklerini reimport tam parametrik bir modeli yeniden oluşturmak için izin verilen nesneleri içinde depolanır. - + Export full FreeCAD parametric model Tam FreeCAD parametrik modeli ver @@ -5147,22 +5274,22 @@ You can change that in the preferences. Listeyi hariç tut: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Bu işaretliyse, mümkün olduğu sürece, benzer girdiler dosyada yalnızca bir kez kullanılacaktır. Bu, dosya boyutunu oldukça azaltabilir, ancak dosyanın insanlar tarafından daha zor okunabilir hale getirecektir - + Reuse similar entities Benzer girdileri tekrar kullan - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Mümkün olduğunda, ekstrüze edilmiş (katılanmış) dikdörtgen IFC nesneleri IfcRectangleProfileDef olarak dışa aktarılır. Bununla birlikte, bazı diğer uygulamaların, bu dosyaları içe aktarmakla ilgili sorunları olduğu bilinmektedir. Durumunuz buysa, bunu burada devre dışı bırakabilirsiniz (tüm profiller IfcArbitraryClosedProfileDef olarak dışa aktarılacaktır). - + Disable IfcRectangleProfileDef IfcRectangleProfileDef devre dışı bırak @@ -5227,14 +5354,49 @@ You can change that in the preferences. Çizgi rengi - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm index 5c04ce9c65..471adb7a8b 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index 8b76d516b0..9faec80f8f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -44,12 +44,12 @@ Об'єкт цього компоненту на клонуванні - + Other shapes that are appended to this object Інші фігури, приєднані до цього об'єкта - + Other shapes that are subtracted from this object Інші фігури, які віднімаються від цього об'єкта @@ -79,7 +79,7 @@ Площа всіх вертикальних граней цього об'єкта - + The area of the projection of this object onto the XY plane Площа проекції цього об'єкта на площину XY @@ -114,7 +114,7 @@ Обчислена площа цього поверху - + The placement of this object Розміщення цього об'єкта @@ -144,12 +144,12 @@ Обертання профілю навколо його осі екструзії - + The length of this element, if not based on a profile Довжина елемента, якщо вона не визначена в профілі - + The width of this element, if not based on a profile Ширина елемента, якщо вона не визначена в профілі @@ -194,22 +194,22 @@ Область цієї панелі - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Нормальний напрямок видавлювання для цього об'єкта (залишити (0,0,0) для завдання автоматичної нормалі) - + The linked object Пов'язаний об'єкт - + The line width of the rendered objects Товщина лінії відтворюваних об'єктів @@ -349,7 +349,7 @@ Висота цього елементу - + The structural nodes of this element Структурні вузли цього елемента @@ -614,132 +614,132 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane Довжина відображення цієї площини перерізу - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane Розмір стрілок цієї площини перерізу - + Show the cut in the 3D view Показати розріз в 3D перегляді - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site Базовий рельєф цієї ділянки - + The postal or zip code of this site Поштовий індекс цієї ділянки - + The city of this site Місто цієї ділянки - + The country of this site Країна цієї ділянки - + The latitude of this site Висота цієї ділянки - + Angle between the true North and the North direction in this document Angle between the true North and the North direction in this document - + The elevation of level 0 of this site The elevation of level 0 of this site - + The perimeter length of this terrain Довжина периметра цієї місцевості - + The volume of earth to be added to this terrain Обсяг землі що буде додано до цієї місцевості - + The volume of earth to be removed from this terrain Обсяг землі що буде видалений з цієї місцевості - + An extrusion vector to use when performing boolean operations An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape Remove splitters from the resulting shape - + Show solar diagram or not Відображення сонячної діаграми чи ні - + The scale of the solar diagram Масштаб сонячної діаграми - + The position of the solar diagram Позиція сонячної діаграми - + The color of the solar diagram Колір сонячної діаграми @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Текст для відображення. Використовуйте $area, $label, $tag, $floor, $walls, $ceiling, щоб вставити відповідні дані - + The name of the font Назва шрифту - + The color of the area text Колір області тексту - + The size of the text font Розмір шрифту тексту - + The size of the first line of text Розмір першого рядка тексту - + The space between the lines of text Відстань між рядками тексту - + The position of the text. Leave (0,0,0) for automatic position Розташування тексту. Залишити (0,0,0) для автоматичного розташування - + The justification of the text Вирівнювання тексту - + The number of decimals to use for calculated texts Кількість десяткових знаків для використання розрахункових текстів - + Show the unit suffix Показати суфікс одиниці @@ -939,102 +934,102 @@ Зсув між меж сходів і структурою - + An optional extrusion path for this element Опціональний шлях витиснення для цього елементу - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line Ширина лінії вузлів - + The size of the node points Розмір точок вузла - + The color of the nodes line Колір лінії вузлів - + The type of structural node Тип структури вузла - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object Довжина цієї стіни. Не використовується, якщо стіна базується на об'єкті, який розташований під нею - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window The normal direction of this window - + The area of this window The area of this window @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ Перелік товщин шарів - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Компоненти @@ -1717,12 +1742,12 @@ Створити вісь - + Remove Видалити - + Add Додати @@ -1832,87 +1857,87 @@ Вид - + Create Section Plane Створити площину розрізу - + Create Site Створити ділянку - + Create Structure Створити структуру - + Create Wall Створити стінку - + Width Ширина - + Height Висота - + Error: Invalid base object Помилка: неприпустимий базовий об’єкт - + This mesh is an invalid solid Ця сітка є недійсним тілом - + Create Window Створити вікно - + Edit Правка - + Create/update component Створити або оновити компонент - + Base 2D object Базовий двовимірний об’єкт - + Wires Каркас - + Create new component Створити новий компонент - + Name Назва - + Type Тип - + Thickness Товщина @@ -1922,7 +1947,7 @@ Помилка: Не вдалося визначити кодування символів - + file %s successfully created. файл %s створений успішно. @@ -1972,32 +1997,32 @@ Створити сходи - + Length Довжина - + Error: The base shape couldn't be extruded along this tool object Помилка: базова фігура не може бути видавлена уздовж цього об'єкта інструменту - + Couldn't compute a shape Не вдалося обчислити форму - + Merge Wall Об'єднати стіни - + Please select only wall objects Будь-ласка виберіть тільки стіни - + Merge Walls Об'єднати стіни @@ -2012,7 +2037,7 @@ Помилка обробки форма цього об'єкту - + Create Structural System Створити Структурну систему @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Висота (мм) - + Create Component Створити компонент @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Стіни можуть бути засновані тільки на об'єкти деталі, або сітки - + Set text position Вказати положення тексту - + Category Категорія - + Key Ключ @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Значення - + Unit Одиниця - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer Фаска - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Рівень - + Rotation Поворот - + Offset Зміщення @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Запланувати - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Виявлено перетин. @@ -2486,22 +2511,22 @@ Site creation aborted. Двері - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. Новий шар - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. У цього об'єкта відсутня поверхня - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Елементи вікна @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Центр - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Ліворуч + + + + Right + Направо + + + + Use sketches + Use sketches + + + + Structure + Структура + + + + Window + Вікно + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems Перевірити виділені об'єкти на наявність проблем - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Компонент - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc Explorer - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Об'єднати стіни - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Поверхня перерізу - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site Ділянка - + Creates a site object including selected objects. Створює об’єкт поверхні, який включає обрані об’єкти @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure Структура - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Створює об’єкт структуру з нуля, або з обраного об’єкту (ескіз, дріт, поверхня або суцільна) @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey Перегляд - + Starts survey Почати перегляд @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window Вікно - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Запис положення камери @@ -4653,7 +4780,7 @@ You can change that in the preferences. Прозорість: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. Товщина - + Force export as Brep Примусовий експорт як Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options Налаштування експорту @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. Колір лінії - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm index 1dffb63f95..35eb299632 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index 0e24410cb2..fb6b249620 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -44,12 +44,12 @@ L'objecte que aquest component clona - + Other shapes that are appended to this object Altres formes que s'afigen a aquest objecte - + Other shapes that are subtracted from this object Altres formes que se sostrauen d'aquest objecte @@ -79,7 +79,7 @@ L'àrea de totes les cares verticals d'aquest objecte - + The area of the projection of this object onto the XY plane L'àrea de la projecció d'aquest objecte en el pla XY @@ -114,7 +114,7 @@ L'àrea calculada d'aquesta planta - + The placement of this object La posició d'aquest objecte @@ -144,12 +144,12 @@ La rotació del perfil al voltant de l'eix d'extrusió - + The length of this element, if not based on a profile La longitud d'aquest element, si no està basat en un perfil - + The width of this element, if not based on a profile L'amplària d'aquest element, si no està basada en un perfil @@ -194,22 +194,22 @@ L'àrea d'aquest tauler - + The facemaker type to use to build the profile of this object El tipus de generador de cares que s'ha d'utilitzar per a construir el perfil d'aquest objecte - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direcció d'extrusió normal d'aquest objecte (mantín (0,0,0) per a automàtica) - + The linked object L'objecte enllaçat - + The line width of the rendered objects L'amplària de la línia dels objectes renderitzats @@ -251,7 +251,7 @@ The position of the tag text. Keep (0,0,0) for center position - The position of the tag text. Keep (0,0,0) for center position + La posició del text de l'etiqueta. Mantín (0,0,0) per a la posició al centre @@ -349,7 +349,7 @@ L'alçària d'aquest element - + The structural nodes of this element Els nodes estructurals d'aquest element @@ -614,132 +614,132 @@ El full de càlcul en què s'imprimeixen els resultats - + If false, non-solids will be cut too, with possible wrong results. Si és fals, els objectes no sòlids també es tallaran, amb possibles resultats erronis - + The display length of this section plane La longitud que es visualitza del pla de secció - + The display height of this section plane L'alçària que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + Show the cut in the 3D view Mostra el tall en la vista 3D - + The rendering mode to use El mode de renderització que s'ha d'utilitzar - + If cut geometry is shown or not Si es mostra o no la geometria de tall - + If cut geometry is filled or not Si s'ompli o no la geometria de tall - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D - + The base terrain of this site El terreny base del lloc - + The postal or zip code of this site El codi postal del lloc - + The city of this site La ciutat del lloc - + The country of this site El país del lloc - + The latitude of this site La latitud del lloc - + Angle between the true North and the North direction in this document Angle entre el nord geogràfic i el nord en aquest document - + The elevation of level 0 of this site L'elevació del nivell 0 d'aquest lloc web - + The perimeter length of this terrain La longitud del perímetre d'aquest terreny - + The volume of earth to be added to this terrain El volum de terra que s'afegeix al terreny - + The volume of earth to be removed from this terrain El volum de terra que se suprimeix del terreny - + An extrusion vector to use when performing boolean operations Un vector d'extrusió que s'utilitza quan es realitzen operacions booleanes - + Remove splitters from the resulting shape Suprimeix els separadors de la forma resultant - + Show solar diagram or not Mostra o no el diagrama solar - + The scale of the solar diagram L'escala del diagrama solar - + The position of the solar diagram La posició del diagrama solar - + The color of the solar diagram El color del diagrama solar @@ -785,81 +785,76 @@ - A zone this space is part of - Una zona de la qual forma part aquest espai - - - The number of people who typically occupy this space El nombre de persones que ocupa generalment aquest espai - + The electric power needed to light this space in Watts La potència elèctrica necessària per a il·luminar aquest espai, en watts - + The electric power needed by the equipment of this space in Watts La potència elèctrica necessària per a l'equipament d'aquest espai, en watts - + If True, Equipment Power will be automatically filled by the equipment included in this space Si cert, l'equipament inclòs en espai omplirà automàticament la potència de l'equip - + The type of air conditioning of this space El tipus d'aire condicionat d'aquest espai - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data El text que s'ha de mostrar. Utilitzeu $area, $label, $tag, $floor, $walls, $ceiling per a inserir les dades corresponents - + The name of the font El nom del tipus de lletra - + The color of the area text El color de l'àrea de text - + The size of the text font La mida del tipus de lletra del text - + The size of the first line of text La mida de la primera línia del text - + The space between the lines of text L'espaiat entre les línies de text - + The position of the text. Leave (0,0,0) for automatic position La posició del text. Deixeu (0,0,0) per a la posició automàtica al centre - + The justification of the text La justificació del text - + The number of decimals to use for calculated texts El nombre de decimals que s'ha d'utilitzar per als textos calculats - + Show the unit suffix Mostra el sufix de la unitat @@ -939,102 +934,102 @@ La distància entre la vora de l'escala i l'estructura - + An optional extrusion path for this element Un camí opcional d'extrusió per a aquest element - + The height or extrusion depth of this element. Keep 0 for automatic L'alçària o profunditat d'extrusió d'aquest element. Mantín 0 per a automàtica - + A description of the standard profile this element is based upon Una descripció del perfil estàndard en què es basa aquest element - + Offset distance between the centerline and the nodes line Distància de separació entre la línia central i la línia de nodes - + If the nodes are visible or not Si els nodes són visibles o no - + The width of the nodes line L'amplària de la línia de nodes - + The size of the node points La mida dels punts de node - + The color of the nodes line El color de la línia de nodes - + The type of structural node El tipus de node estructural - + Axes systems this structure is built on Sistema d'eixos sobre el qual està construïda aquesta estructura - + The element numbers to exclude when this structure is based on axes El nombre d'elements que s'han d'excloure quan l'estructura es basa en eixos - + If true the element are aligned with axes Si s'estableix a cert, l'element s'alinea amb els eixos - + The length of this wall. Not used if this wall is based on an underlying object La longitud del mur. No s'utilitza si el mur es basa en un objecte subjacent - + The width of this wall. Not used if this wall is based on a face L'amplària del mur. No s'utilitza si el mur es basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid L'alçària del mur. Manteniu 0 per a automàtica. No s'utilitza si el mur es basa en un sòlid - + The alignment of this wall on its base object, if applicable L'alineació del mur sobre el seu objecte de base, si correspon - + The face number of the base object used to build this wall El número de la cara de l'objecte de base utilitzat per a construir el mur - + The offset between this wall and its baseline (only for left and right alignments) La distància entre el mur i la seua línia de base (només per a les alineacions dreta i esquerra) - + The normal direction of this window La direcció normal de la finestra - + The area of this window L'àrea de la finestra @@ -1049,7 +1044,7 @@ Un emplaçament opcional addicional per a afegir al perfil abans d'extrudir-lo - + Opens the subcomponents that have a hinge defined Obri els subcomponents que tenen una frontissa definida @@ -1089,12 +1084,12 @@ La llista dels gruixos de capa - + The line color of the projected objects El color de la línia dels objectes projectats - + The color of the cut faces (if turned on) El color de les cares retallades (si està activat) @@ -1104,7 +1099,7 @@ La superposició dels muntants d'escala sobre la part inferior de les esteses - + The number of the wire that defines the hole. A value of 0 means automatic El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic @@ -1194,7 +1189,7 @@ L'espaiat personalitzat de l'armadura corrugada - + Shape of rebar Forma de l'armadura corrugada @@ -1204,17 +1199,17 @@ Inverteix la direcció de la teulada si va en direcció equivocada - + Shows plan opening symbols if available Mostra els símbols d'obertura de la planta, si està disponible - + Show elevation opening symbols if available Mostra els símbols d'obertura de l'elevació, si està disponible - + The objects that host this window Els objectes que allotja aquesta finestra @@ -1269,12 +1264,12 @@ El nivell del punt (0,0,0) en aquest nivell - + The shape of this object La forma d'aquest objecte - + The line width of this object L'amplària de la línia d'aquest objecte @@ -1414,54 +1409,54 @@ Si és cert, els colors del fitxer enllaçat es mantindran actualitzats - + The objects that must be considered by this section plane. Empty means the whole document. Els documents que el pla de secció ha de tindre en compte. Buit significa el document sencer. - + The transparency of this object La transparència d'aquest objecte - + The color of this object El color d'aquest objecte - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distància entre el pla de tall i la vista real del tall (manteniu aquest valor molt baix però no a zero) - + The street and house number of this site, with postal box or apartment number if needed El carrer i el número de casa d'aquest lloc, amb el número de bústia o apartament si cal - + The region, province or county of this site La regió, la província o comarca d'aquest lloc - + A url that shows this site in a mapping website Un url que mosta aquest lloc en un lloc web de cartografia - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Un desplaçament opcional entre l'origen del model (0,0,0) i el punt indicat per les coordenades geogràfiques - + Specifies if this space is internal or external Especifica si aquest espai és intern o extern The width of a Landing (Second edge and after - First edge follows Width property) - The width of a Landing (Second edge and after - First edge follows Width property) + L'amplària d'un replà (segona aresta i següents - La primera aresta segueix la propietat d'amplària) @@ -1504,200 +1499,230 @@ El 'contorn esquerre' de tots els segments de les escales - + Enable this to make the wall generate blocks Habilita aquesta opció per fer que la paret genere blocs - + The length of each block La llargària de cada bloc - + The height of each block L'alçària de cada bloc - + The horizontal offset of the first line of blocks La separació horitzontal de la primera línia de blocs - + The horizontal offset of the second line of blocks La separació horitzontal de la segona línia de blocs - + The size of the joints between each block La mida de les juntes entre cada bloc - + The number of entire blocks El nombre de blocs sencers - + The number of broken blocks El nombre de blocs trencats - + The components of this window Els components d'aquesta finestra - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. La profunditat del forat que la finestra fa en el seu objecte amfitrió. Si és 0, el valor es calcularà automàticament. - + An optional object that defines a volume to be subtracted from hosts of this window Un objecte opcional que defineix un volum que s'ha de sostraure dels amfitrions de la finestra - + The width of this window L'amplària de la finestra - + The height of this window L'alçària de la finestra - + The preset number this window is based on El número preestablert en què es basa aquesta finestra - + The frame size of this window La mida de marc de la finestra - + The offset size of this window La mida de la separació de la finestra - + The width of louvre elements L'amplària dels elements del llistó - + The space between louvre elements L'espai entre els elements del llistó - + The number of the wire that defines the hole. If 0, the value will be calculated automatically El nombre de filferros que defineix el forat. Si 0, el valor es calcularà automàticament Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Especifica si en moure aquest objecte es mou la seua base en el seu lloc A single section of the fence - A single section of the fence + Una única secció de tanca A single fence post - A single fence post + Un únic pal de la tanca The Path the fence should follow - The Path the fence should follow + El camí que ha de seguir la tanca The number of sections the fence is built of - The number of sections the fence is built of + El nombre de seccions amb què es construeix la tanca The number of posts used to build the fence - The number of posts used to build the fence + El nombre de pals utilitzats per a construir la tanca - + The type of this object - The type of this object + El tipus d'aquest objecte IFC data - IFC data + Dades IFC IFC properties of this object - IFC properties of this object + Propietats IFC d'aquest objecte - + Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + No s'ha implementat encara la descripció dels atributs IFC + + + + If True, resulting views will be clipped to the section plane area. + Si es cert, les vistes que en resulten es retallaran en la zona del pla de la secció. - If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. - - - If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. - - - - When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site - - - - Show compass or not - Show compass or not - - - - The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Si és cert, el color dels objectes s'utilitzarà per a emplenar les zones retallades. - The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + When set to 'True North' the whole geometry will be rotated to match the true north of this site + Quan s'estableix com «Nord vertader», tota la geometria gira per a coincidir amb el vertader nord d'aquest lloc - + + Show compass or not + Mostra o no la brúixola + + + + The rotation of the Compass relative to the Site + La rotació de la brúixola relativa al Lloc + + + + The position of the Compass relative to the Site placement + La posició de la brúixola en relació al posicionament del Lloc + + + Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + Actualitza el valor de la declinació basat en el gir de la brúixola The thickness of the risers - The thickness of the risers + La grossària de les contrapetges The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + El «contorn dret» de tots els segments de les escales + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. Arch - + Components Components @@ -1717,12 +1742,12 @@ Crea l'eix - + Remove Elimina - + Add Afig @@ -1832,87 +1857,87 @@ Vista de - + Create Section Plane Crea un pla de secció - + Create Site Crea un lloc - + Create Structure Crea una estructura - + Create Wall Crea un mur - + Width Amplària - + Height Alçària - + Error: Invalid base object Error: L'objecte de base no és vàlid. - + This mesh is an invalid solid Aquesta malla no és un sòlid vàlid. - + Create Window Crea una finestra - + Edit Edita - + Create/update component Crea/actualitza el component - + Base 2D object Objecte base 2D - + Wires Filferros - + Create new component Crea un component nou - + Name Nom - + Type Tipus - + Thickness Gruix @@ -1922,7 +1947,7 @@ Error: no s'ha pogut determinar la codificació de caràcters - + file %s successfully created. el fitxer %s s'ha creat correctament. @@ -1972,32 +1997,32 @@ Crea escales - + Length Longitud - + Error: The base shape couldn't be extruded along this tool object Error: la forma base no s'ha pogut extrudir al llarg de l'objecte guia - + Couldn't compute a shape No s'ha pogut calcular la forma. - + Merge Wall Uneix el mur - + Please select only wall objects Seleccioneu només objectes mur - + Merge Walls Fusiona els murs @@ -2012,7 +2037,7 @@ S'ha produït un error en calcular la forma de l'objecte - + Create Structural System Crea un sistema estructural @@ -2162,7 +2187,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Alçària (mm) - + Create Component Crea un component @@ -2177,17 +2202,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Els murs només es poden crear a partir d'objectes peça o malla - + Set text position Estableix la posició del text - + Category Categoria - + Key Clau @@ -2197,12 +2222,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Valor - + Unit Unitat - + Create IFC properties spreadsheet Crea el full de càlcul de propietats IFC @@ -2232,7 +2257,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Crea un full de tauler - + Facemaker returned an error El generador de cares ha retornat un error. @@ -2257,137 +2282,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Crea un connector - + Precast elements Elements prefabricats - + Slab type Tipus de llosa - + Chamfer Xamfrà - + Dent length Longitud de l'aleta - + Dent width Amplària de l'aleta - + Dent height Alçària de l'aleta - + Slab base Base de llosa - + Number of holes Nombre de forats - + Major diameter of holes Diàmetre major dels forats - + Minor diameter of holes Diàmetre menor dels forats - + Spacing between holes Espaiat entre forats - + Number of grooves Nombre de ranures - + Depth of grooves Profunditat de les ranures - + Height of grooves Alçària de les ranures - + Spacing between grooves Espaiat entre ranures - + Number of risers Nombre de contrapetges - + Length of down floor Longitud de la planta baixa - + Height of risers Alçària de les contrapetges - + Depth of treads Profunditat de les esteses - + Precast options Opcions de prefabricats - + Dents list Llista d'aletes - + Add dent Afig una aleta - + Remove dent Elimina l'aleta - + Slant Inclinació - + Level Nivell - + Rotation Rotació - + Offset Separació @@ -2412,58 +2437,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Guió - + There is no valid object in the selection. Site creation aborted. No hi ha cap objecte vàlid en la selecció. S'avorta la creació del lloc. - + Node Tools Eines de node - + Reset nodes Reinicialitza els nodes - + Edit nodes Edita els nodes - + Extend nodes Estén els nodes - + Extends the nodes of this element to reach the nodes of another element Estén els nodes d'aquest element per a arribar als nodes d'un altre element - + Connect nodes Connecta els nodes - + Connects nodes of this element with the nodes of another element Connecta els nodes d'aquest element amb els nodes d'un altre element - + Toggle all nodes Commuta tots els nodes - + Toggles all structural nodes of the document on/off Activa/desactiva en el document tots els nodes estructurals - + Intersection found. S'ha trobat una intersecció. @@ -2474,22 +2499,22 @@ Site creation aborted. Porta - + Hinge Frontissa - + Opening mode Mode d'obertura - + Get selected edge Obtín la vora seleccionada - + Press to retrieve the selected edge Premeu per a recuperar la vora seleccionada @@ -2519,17 +2544,17 @@ Site creation aborted. Capa nova - + Wall Presets... Murs predefinits... - + Hole wire Filferro de forat - + Pick selected Tria el seleccionat @@ -2614,17 +2639,17 @@ Site creation aborted. Aquest objecte no té cap cara - + Space boundaries Límits de l'espai - + Error: Unable to modify the base object of this wall Error: No es pot modificar l'objecte base d'aquest mur - + Window elements Elements de finestra @@ -2735,7 +2760,7 @@ Building creation aborted. Tot correcte. No s'ha trobat cap problema - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'objecte no té un atribut IfcProperties. Cancel·la la creació de fulls de càlcul per a l'objecte: @@ -2800,10 +2825,7 @@ Building creation aborted. Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. + Podeu col·locar qualsevol cosa en un objecte Planta excepte els objectes Lloc, Construcció i Planta, ja que l'objecte Planta no els accepta. Els objectes Lloc, Construcció i Planta s'eliminaran de la selecció. Podeu canviar açò en les preferències. @@ -2917,47 +2939,47 @@ Floor creation aborted. No hi ha cap full de càlcul adjunt a aquesta planificació - + Section plane settings Configuració del pla de secció - + Objects seen by this section plane: Objectes vistos en aquest pla de secció: - + Section plane placement: Posicionament del pla de secció: - + Rotate X Gira X - + Rotate Y Gira Y - + Rotate Z Gira Z - + Resize Canvia la mida - + Center Centre - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2965,77 +2987,77 @@ Note: You can change that in the preferences. Seleccioneu només objectes Construcció o res. L'objecte Lloc només accepta objectes Construcció. Els altres objectes s'eliminaran de la selecció. Podeu canviar açò en les preferències. - + Choose another Structure object: Tria un altre objecte Estructura: - + The chosen object is not a Structure L'objecte triat no és una Estructura - + The chosen object has no structural nodes L'objecte triat no té nodes estructurals - + One of these objects has more than 2 nodes Un d'aquests objectes té més de 2 nodes - + Unable to find a suitable intersection point No s'ha pogut trobar un punt d'intersecció adequat - + Intersection found. S'ha trobat una intersecció. - + The selected wall contains no subwall to merge El mur seleccionat no conté cap submur per a fusionar - + Cannot compute blocks for wall No es pot calcular els blocs per a la paret - + Choose a face on an existing object or select a preset Trieu una cara en un objecte existent o seleccioneu un paràmetre predefinit - + Unable to create component No es pot crear el component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El número del filferros que defineix un forat en l'objecte amfitrió. Amb un valor de zero s'adoptarà automàticament el filferro més gran - + + default + per defecte - + If this is checked, the default Frame value of this window will be added to the value entered here Si açò està seleccionat, el valor per defecte del marc d'aquesta finestra s'afegirà al valor introduït ací - + If this is checked, the default Offset value of this window will be added to the value entered here Si açò està seleccionat, el valor per defecte de separació d'aquesta finestra s'afegirà al valor introduït ací - + pycollada not found, collada support is disabled. no s'ha trobat el mòdul «pycollada», el suport per a «collada» està inhabilitat. @@ -3075,7 +3097,7 @@ Note: You can change that in the preferences. Error: la versió d'IfcOpenShell és massa antiga - + Successfully written S'ha escrit correctament @@ -3085,7 +3107,7 @@ Note: You can change that in the preferences. S'ha trobat una forma amb corbes, s'està triangulant - + Successfully imported S'ha importat correctament @@ -3095,50 +3117,162 @@ Note: You can change that in the preferences. Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. + Podeu col·locar qualsevol cosa en un objecte Construcció excepte els objectes Lloc i Construcció ja que els objectes Construcció no els accepta. Els objectes Lloc i Construcció s'eliminaran de la selecció. Podeu canviar açò en les preferències. - + Remove highlighted objects from the list above - Remove highlighted objects from the list above + Elimina els objectes ressaltats de la llista anterior - + Add selected Afig el seleccionat - + Add selected object(s) to the scope of this section plane - Add selected object(s) to the scope of this section plane + Afig l'objecte o els objectes seleccionats a l'àmbit d'aquest pla de secció + + + + Rotates the plane along the X axis + Gira el pla al llarg de l'eix X - Rotates the plane along the X axis - Rotates the plane along the X axis + Rotates the plane along the Y axis + Gira el pla al llarg de l'eix Y - Rotates the plane along the Y axis - Rotates the plane along the Y axis + Rotates the plane along the Z axis + Gira el pla al llarg de l'eix Z - Rotates the plane along the Z axis - Rotates the plane along the Z axis + Resizes the plane to fit the objects in the list above + Canvia la mida del pla per a ajustar els objectes en la llista anterior - Resizes the plane to fit the objects in the list above - Resizes the plane to fit the objects in the list above + Centers the plane on the objects in the list above + Centra el pla sobre els objectes de la llista anterior - - Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + + First point of the beam + Primer punt de la biga + + + + Base point of column + Punt d'origen de la columna + + + + Next point + Punt següent + + + + Structure options + Opcions de l'estructura + + + + Drawing mode + Mode de dibuix + + + + Beam + Biga + + + + Column + Columna + + + + Preset + Preconfiguració + + + + Switch L/H + Canvia L/H + + + + Switch L/W + Canvia L/W + + + + Con&tinue + Con&tinua + + + + First point of wall + Primer punt del mur + + + + Wall options + Opcions del mur + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Aquesta llista mostra tots els objectes multimaterials d'aquest document. Creeu-ne alguns per a definir els tipus de mur. + + + + Alignment + Alineació + + + + Left + Esquerra + + + + Right + Dreta + + + + Use sketches + Utilitza els esbossos + + + + Structure + Estructura + + + + Window + Finestra + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height @@ -3352,21 +3486,16 @@ You can change that in the preferences. Checks the selected objects for problems Comprova si els objectes seleccionats presenten algun problema - - - Explore the contents of an IFC file - Explora el contingut d'un fitxer IFC - Arch_CloneComponent - + Clone component Clona el component - + Clones an object as an undefined architectural component Clona un objecte com a component arquitectònic no definit @@ -3387,12 +3516,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Crea un component arquitectònic no definit @@ -3426,14 +3555,14 @@ You can change that in the preferences. Arch_Fence - + Fence - Fence + Tanca - + Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Crea un objecte tanca a partir d'una secció, pal i camí seleccionats @@ -3525,23 +3654,15 @@ You can change that in the preferences. Els índexs de les cares que s'han d'amagar - - Arch_IfcExplorer - - - Ifc Explorer - Explorador Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea un full de càlcul IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea un full de càlcul per a emmagatzemar propietats IFC d'un objecte. @@ -3570,12 +3691,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Fusiona els murs - + Merges the selected walls, if possible Fusiona els murs seleccionats, si és possible @@ -3781,12 +3902,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Pla de secció - + Creates a section plane object, including the selected objects Crea un pla de secció incloent-hi els objectes seleccionats @@ -3807,12 +3928,12 @@ You can change that in the preferences. Arch_Site - + Site Lloc - + Creates a site object including selected objects. Crea un lloc incloent-hi els objectes seleccionats @@ -3859,12 +3980,12 @@ You can change that in the preferences. Arch_Structure - + Structure Estructura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea una estructura a partir de zero o d'un objecte seleccionat (esbós, línia, cara o sòlid) @@ -3872,12 +3993,12 @@ You can change that in the preferences. Arch_Survey - + Survey Recollida de dades - + Starts survey Inicia la recollida de dades @@ -3885,12 +4006,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Commuta l'indicador de Brep IFC - + Force an object to be exported as Brep or not Imposa (o no) que un objecte s'exporte com a Brep @@ -3898,12 +4019,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Commuta els subcomponents - + Shows or hides the subcomponents of this object Mostra o amaga els subcomponents de l'objecte @@ -3924,12 +4045,12 @@ You can change that in the preferences. Arch_Window - + Window Finestra - + Creates a window object from a selected object (wire, rectangle or sketch) Crea una finestra a partir d'un objecte seleccionat (filferro, rectangle o esbós) @@ -4154,12 +4275,12 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes BimServer URL: - BimServer URL: + URL del servidor Bim: Keep me logged in across FreeCAD sessions - Keep me logged in across FreeCAD sessions + Mantín-me connectat durant les sessions del FreeCAD sessions @@ -4200,7 +4321,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Draft - + Writing camera position S'està escrivint la posició de la càmera @@ -4636,7 +4757,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Transparència: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. A alguns visualitzadors d'IFC no els agraden els objectes exportats com a extrusions. Utilitzeu aquesta funcionalitat per a imposar que tots els objectes s'exporten com a geometria BREP. @@ -4676,7 +4797,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Gruix - + Force export as Brep Imposa l'exportació com a Brep @@ -4706,7 +4827,7 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes DAE - + Export options Opcions d'exportació @@ -4916,22 +5037,22 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Permet quadrilàters - + Use triangulation options set in the DAE options page Utilitza les opcions de triangulació establides en la pàgina d'opcions del DAE - + Use DAE triangulation options Utililtza les opcions de triangulació DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Les formes corbes que no es poden representar com a corbes en un IFC es descomponen en facetes planes. Si està marcada, es realitzaran alguns càlculs addicionals per a unir les facetes coplanars. - + Join coplanar facets when triangulating Uneix facetes coplanars durant la triangulació @@ -4971,12 +5092,12 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Importa les propietats IFC en un full de càlcul - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Quan s'exporten objectes sense UID, l'UID generat s'emmagatzemarà dins de l'objecte FreeCAD per a reutilitzar-lo la pròxima vegada que s'exporte l'objecte, la qual cosa dóna menors diferències entre les versions - + Store IFC universal ID in FreeCAD objects Emmagatzema l'ID universal d'IFC dins de l'objecte FreeCAD @@ -5046,17 +5167,17 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Separa els murs multicapa - + Warning, experimental feature! Atenció! És una funcionalitat experimental. - + Use IfcOpenShell serializer if available Utilitzeu el serialitzador IfcOpenShell, si està disponible - + Export 2D objects as IfcAnnotations Exporta objectes 2D com a objects as a anotacions Ifc @@ -5081,12 +5202,12 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Ajusta la vista durant la importació - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Si està marcada, totes les propietats d'objecte del FreeCAD s'emmagatzemaran dins dels objectes exportats, i això permet tornar a crear un model paramètric complet en tornar a importar. - + Export full FreeCAD parametric model Exporta un model paramètric complet de FreeCAD @@ -5141,59 +5262,59 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Llista d'exclusió: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans Si està marcada, quan siga possible, s'utilitzaran entitats semblants sols una vegada en el fitxer. Açò pot reduir molt la mida del fitxer, però el farà menys llegible per als humans - + Reuse similar entities Reutilitza entitats similars - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). Si és possible, els objectes IFC que són rectangles extrudits s'exporten com a IfcRectangleProfileDef. Tanmateix, algunes altres aplicacions tristament tenen problemes per a importar aqueixa entitat. Si és així, ho podeu deshabilitar ací. (Tots els perfils s'exportaran com a IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Desactiva IfcRectangleProfileDef Set "Move base" property to True by default - Set "Move base" property to True by default + Estableix la propietat "Mou la base" com a vertadera per defecte IFC version - IFC version + Versió IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + La versió IFC canviarà quins atributs i productes són compatibles IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Espais Line style: - Line style: + Estil de línia: @@ -5203,17 +5324,17 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Dashed - Dashed + Discontínua Dotted - Dotted + Puntejada Dashdot - Dashdot + Guió punt @@ -5221,14 +5342,49 @@ Nota: a partir de LibreOffice v5.4.5.1 el camí correcte és: Barra de pestanyes Color de línia - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + Alguns tipus d'IFC com ara IfcWall o IfcBeam, tenen versions estàndards especials com IfcWallStandardCase o IfcBeamStandardCase. Si aquesta opció està activada, FreeCAD exportarà automàticament aquests objectes com a casos estàndards quan es complisquen les condicions necessàries. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.qm b/src/Mod/Arch/Resources/translations/Arch_vi.qm index 2f8a896d07..018ca46d3a 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_vi.qm and b/src/Mod/Arch/Resources/translations/Arch_vi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index 48624bccc1..5e70bfa5e8 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -44,12 +44,12 @@ Nhân bản đối tượng - + Other shapes that are appended to this object Các hình dạng khác được gắn liền với đối tượng này - + Other shapes that are subtracted from this object Một số hình dạng khác thì bị gỡ khỏi đối tượng này @@ -79,7 +79,7 @@ Diện tích của tất cả các bề mặt thẳng đứng của đối tượng này - + The area of the projection of this object onto the XY plane Diện tích hình chiếu của đối tượng này trên mặt phẳng XY @@ -114,7 +114,7 @@ Phần diện tích tính toán của tầng này - + The placement of this object Vị trí của đối tượng này @@ -144,12 +144,12 @@ Sự xoay bề mặt xung quanh trục đùn của nó - + The length of this element, if not based on a profile Độ dài của bộ phận này nếu nó không dựa trên bề mặt - + The width of this element, if not based on a profile Bề rộng của bộ phận này nếu nó không dựa trên bề mặt @@ -194,22 +194,22 @@ Diện tích của panen này - + The facemaker type to use to build the profile of this object Loại công cụ được sử dụng để xây dựng bề mặt của đối tượng này - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Hướng đùn thông thường của đối tượng này (giữ mặc định ở (0,0,0)) - + The linked object Đối tượng được liên kết - + The line width of the rendered objects Độ dày của các đối tượng được hiển thị @@ -349,7 +349,7 @@ Chiều cao của bộ phận này - + The structural nodes of this element Các nút kết cấu của bộ phận này @@ -614,132 +614,132 @@ Bảng tính để in kết quả - + If false, non-solids will be cut too, with possible wrong results. Nếu sai, những vật không phải chất rắn cũng sẽ bị cắt, với kết quả sai nhất có thể. - + The display length of this section plane Chiều dài hiển thị của mặt cắt này - + The display height of this section plane Chiều cao hiển thị của mặt cắt này - + The size of the arrows of this section plane Kích thước mũi tên chỉ hướng của mặt cắt này - + Show the cut in the 3D view Hiển thị vết cắt ở chế độ xem 3D - + The rendering mode to use Chế độ hình chiếu để sử dụng - + If cut geometry is shown or not Nếu hình cắt có được hiển thị hay không - + If cut geometry is filled or not Nếu hình cắt có được lấp đầy hay không - + The size of the texts inside this object Kích thước của các văn bản bên trong bộ phận này - + If checked, source objects are displayed regardless of being visible in the 3D model Nếu được chọn, các đối tượng sẽ hiển thị bất kể chúng có hiển thị trong mô hình 3D hay không - + The base terrain of this site Đất nền của công trình này - + The postal or zip code of this site Mã bưu chính của vị trí công trình này - + The city of this site Thành phố nơi công trình được xây dựng - + The country of this site Quốc gia nơi công trình này được xây dựng - + The latitude of this site Vĩ độ của vị trí công trình này - + Angle between the true North and the North direction in this document Góc hợp bởi hướng Bắc trên thực tế và hướng Bắc trong tài liệu - + The elevation of level 0 of this site Cao độ của mực nước biển so với công trình này - + The perimeter length of this terrain Chu vi của địa hình này - + The volume of earth to be added to this terrain Khối lượng đất được bổ sung vào khu vực này - + The volume of earth to be removed from this terrain Khối lượng đất được đào bỏ và di chuyển ra khỏi khu vực này - + An extrusion vector to use when performing boolean operations Một vector đùn được sử dụng khi thực hiện các phép toán Boolean - + Remove splitters from the resulting shape Loại bỏ các vết nứt nẻ ra khỏi hình dạng cuối cùng - + Show solar diagram or not Chọn hiển thị hoặc ẩn sơ đồ năng lượng mặt trời - + The scale of the solar diagram Hệ số tỷ lệ của sơ đồ năng lượng mặt trời - + The position of the solar diagram Vị trí của sơ đồ năng lượng mặt trời - + The color of the solar diagram Màu sắc của sơ đồ năng lượng mặt trời @@ -785,81 +785,76 @@ - A zone this space is part of - Một khu vực thuộc không gian này là một phần của - - - The number of people who typically occupy this space Số người thường cư ngụ trong không gian này - + The electric power needed to light this space in Watts Công suất điện yêu cầu (tính theo đơn vị Oát) cho hệ thống chiếu sáng trong không gian này - + The electric power needed by the equipment of this space in Watts Công suất điện yêu cầu ( tính theo đơn vị Oát) cho các thiết bị điện trong không gian này - + If True, Equipment Power will be automatically filled by the equipment included in this space Nếu Đúng, nguồn điện yêu cầu sẽ tự động được nạp cho các thiết bị nằm trong không gian này - + The type of air conditioning of this space Loại máy lạnh trong không gian này - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data Để hiển thị văn bản. Sử dụng $area, $label, $tag, $floor, $walls, $ceiling để chèn các loại dữ liệu tương ứng - + The name of the font Tên của phông chữ - + The color of the area text Màu chữ của văn bản trong khu vực - + The size of the text font Kích cỡ phông chữ của văn bản - + The size of the first line of text Kích cỡ dòng đầu tiên của văn bản - + The space between the lines of text Khoảng cách giữa các dòng văn bản - + The position of the text. Leave (0,0,0) for automatic position Vị trí của văn bản. Đặt (0,0,0) là vị trí tự động - + The justification of the text Căn chỉnh văn bản - + The number of decimals to use for calculated texts Số lượng chữ số thập phân sau dấu phẩy của các số liệu - + Show the unit suffix Hiển thị các đơn vị đi kèm @@ -939,102 +934,102 @@ Khoảng cách giữa đường viền và kết cấu - + An optional extrusion path for this element Đường dẫn đùn tùy chọn cho bộ phận này - + The height or extrusion depth of this element. Keep 0 for automatic Chiều cao hoặc bề dày đùn của bộ phận này. Tự động đặt là 0 - + A description of the standard profile this element is based upon Mô tả về cấu hình chuẩn mà bộ phận này dựa vào - + Offset distance between the centerline and the nodes line Khoảng cách giữa đường trung tâm và đường nút - + If the nodes are visible or not Nếu các nút được hiển thị hoặc không - + The width of the nodes line Bề rộng của đường nút - + The size of the node points Kích thước của các điểm nút - + The color of the nodes line Màu sắc của đường nút - + The type of structural node Kiểu kết cấu của nút - + Axes systems this structure is built on Hệ thống trục của cấu trúc này được xây dựng trên - + The element numbers to exclude when this structure is based on axes Số lượng các bộ phận cần loại trừ khi kết cấu dựa trên các trục - + If true the element are aligned with axes Nếu đúng thì bộ phận đó được căn chỉnh với các trục - + The length of this wall. Not used if this wall is based on an underlying object Chiều dài của bức tường này. Nó không được sử dụng nếu bức tường này được xây dựng đứng trên một đối tượng ở dưới - + The width of this wall. Not used if this wall is based on a face Bề rộng của bức tường này. Nó không được sử dụng nếu bức tường này được dựa trên một bề mặt khác - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Chiều cao của bức tường này. Đặt tự động ở mức 0. Nó không được sử dụng nếu bức tường này được dựa trên một vật thể rắn khác - + The alignment of this wall on its base object, if applicable Căn chỉnh bức tường này dựa trên đối tượng cơ sở của nó, nếu áp dụng - + The face number of the base object used to build this wall Số mặt của đối tượng cơ sở được sử dụng để xây dựng bức tường này - + The offset between this wall and its baseline (only for left and right alignments) Khoảng cách giữa bức tường này và đường cơ sở của nó (chỉ đối với căn chỉnh trái và phải) - + The normal direction of this window Phương pháp tuyến của cửa sổ này - + The area of this window Diện tích của cửa sổ này @@ -1049,7 +1044,7 @@ Một vị trí tùy chọn bổ sung để thêm cấu hình trước khi ép đùn - + Opens the subcomponents that have a hinge defined Mở các thành phần phụ mà có bản lề đã được xác định @@ -1089,12 +1084,12 @@ Danh sách của chiều dày các lớp - + The line color of the projected objects Màu đường của các đối tượng được chiếu - + The color of the cut faces (if turned on) Màu sắc của các mặt cắt (nếu kích hoạt) @@ -1104,7 +1099,7 @@ Xếp chồng các cốn thang lên trên đáy các mặt bậc - + The number of the wire that defines the hole. A value of 0 means automatic Số dây xác định lỗ. Giá trị 0 sẽ có nghĩa là giá trị tự động @@ -1194,7 +1189,7 @@ Không gian tùy chỉnh của thanh cốt thép - + Shape of rebar Hình dạng thanh cốt thép @@ -1204,17 +1199,17 @@ Đảo ngược chiều của mái nhà nếu nó để sai chiều - + Shows plan opening symbols if available Hiển thị biểu tượng mở bản vẽ (nếu có) - + Show elevation opening symbols if available Hiển thị biểu tượng mở cao độ (nếu có) - + The objects that host this window Những bộ phận chứa cửa sổ này @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object Hình dạng của bộ phận này - + The line width of this object Chiều dài đường vẽ của bộ phận này @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Độ trong suốt của đối tượng này - + The color of this object Màu sắc của đối tượng này - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Khoảng cách giữa mặt phẳng được cắt và chế độ xem cắt thực tế (giữ giá trị rất nhỏ nhưng không bằng 0) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website Đường dẫn Url hiển thị vị trí công trường này trên trang web bản đồ - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates Khoảng cách tùy chọn giữa điểm xuất phát của mô hình (0,0,0) và điểm được định vị thông qua tọa độ địa lý - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Kích hoạt tính năng này để làm cho tường tạo ra các khối - + The length of each block Chiều dài của mỗi khối - + The height of each block Chiều cao của mỗi khối - + The horizontal offset of the first line of blocks Khoảng cách theo phương ngang của hàng khối đầu tiên - + The horizontal offset of the second line of blocks Khoảng cách theo phương ngang của hàng khối thứ hai - + The size of the joints between each block Kích thước của các khớp nối giữa mỗi khối - + The number of entire blocks Số lượng của toàn bộ khối - + The number of broken blocks Số khối bị hỏng - + The components of this window Các thành phần của cửa sổ này - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. Độ sâu của lỗ được cửa sổ này tạo ra trong bộ phận chính của nó. Nếu bằng 0, giá trị này sẽ được tính tự động. - + An optional object that defines a volume to be subtracted from hosts of this window Một bộ phận tùy chọn mà xác định một khối được xóa khỏi các bộ phận chính của cửa sổ này - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on Số mặc định mà cửa sổ này dựa vào - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements Chiều rộng của các phần tử Louvre - + The space between louvre elements Không gian giữa các phần tử Louvre - + The number of the wire that defines the hole. If 0, the value will be calculated automatically Số dây xác định lỗ. Giá trị 0 sẽ có nghĩa là giá trị tự động @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - Show compass or not + Hiển thị hướng hay không - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components Các bộ phận @@ -1717,12 +1742,12 @@ Tạo trục - + Remove Xóa bỏ - + Add Thêm mới @@ -1832,87 +1857,87 @@ Hình, dạng của - + Create Section Plane Tạo mặt cắt - + Create Site Tạo công trường - + Create Structure Tạo kết cấu - + Create Wall Tạo tường - + Width Bề rộng - + Height Chiều cao - + Error: Invalid base object Lỗi: Đối tượng cơ bản không hợp lệ - + This mesh is an invalid solid Lưới này là một vật thể rắn không hợp lệ - + Create Window Tạo cửa sổ - + Edit Chỉnh sửa - + Create/update component Tạo/cập nhật thành phần - + Base 2D object Đối tượng 2D cơ bản - + Wires Dây dẫn - + Create new component Tạo bộ phận mới - + Name Tên - + Type Kiểu - + Thickness Độ dày @@ -1922,7 +1947,7 @@ Lỗi: Không thể xác định mã hóa ký tự - + file %s successfully created. tệp tin %s đã được tạo thành công. @@ -1972,32 +1997,32 @@ Tạo cầu thang - + Length Chiều dài - + Error: The base shape couldn't be extruded along this tool object Lỗi: Không thể mở rộng hình dạng cơ sở dọc theo đối tượng công cụ này - + Couldn't compute a shape Không thể tính toán hình dạng - + Merge Wall Kết hợp tường - + Please select only wall objects Hãy chỉ chọn đối tượng tường - + Merge Walls Kết hợp những bức tường @@ -2012,7 +2037,7 @@ Lỗi tính toán hình dạng của đối tượng này - + Create Structural System Tạo hệ thống kết cấu @@ -2172,7 +2197,7 @@ Nếu Run = 0 thì Run được tính toán sao cho chiều cao giống với c Chiều cao (mm) - + Create Component Tạo bộ phận @@ -2187,17 +2212,17 @@ Nếu Run = 0 thì Run được tính toán sao cho chiều cao giống với c Tường chỉ có thể xây dựng trên các đối tượng bộ phận hoặc lưới - + Set text position Đặt vị trí văn bản - + Category Thể loại - + Key Chìa khóa @@ -2207,12 +2232,12 @@ Nếu Run = 0 thì Run được tính toán sao cho chiều cao giống với c Giá trị - + Unit Đơn vị - + Create IFC properties spreadsheet Tạo bảng thuộc tính IFC @@ -2242,7 +2267,7 @@ Nếu Run = 0 thì Run được tính toán sao cho chiều cao giống với c Tạo trang tổng hợp các đối tượng mặt cắt panen - + Facemaker returned an error Facemaker đã hoàn trả một lỗi @@ -2267,137 +2292,137 @@ Nếu Run = 0 thì Run được tính toán sao cho chiều cao giống với c Tạo bộ phận liên kết - + Precast elements Các kết cấu đúc sẵn - + Slab type Kiểu tấm - + Chamfer Vát - + Dent length Chiều dài của khoang - + Dent width Bề rộng của khoang - + Dent height Chiều cao của khoang - + Slab base Tấm cơ sở - + Number of holes Số lượng lỗ - + Major diameter of holes Đường kính ngoài của lỗ - + Minor diameter of holes Đường kính trong của lỗ - + Spacing between holes Khoảng cách giữa các lỗ - + Number of grooves Số lượng rãnh - + Depth of grooves Chiều sâu của rãnh - + Height of grooves Chiều cao của rãnh - + Spacing between grooves Khoảng cách giữa các rãnh - + Number of risers Số lượng cổ bậc - + Length of down floor Chiều dài của tầng dưới - + Height of risers Chiều cao cổ bậc - + Depth of treads Độ dày của mặt bậc - + Precast options Các tùy chọn đúc sẵn - + Dents list Danh sách vết lõm - + Add dent Thêm vết lõm - + Remove dent Gỡ vết lõm - + Slant Nghiêng - + Level Mức độ - + Rotation Xoay - + Offset Offset @@ -2422,58 +2447,58 @@ Nếu Run = 0 thì Run được tính toán sao cho chiều cao giống với c Thời gian biểu - + There is no valid object in the selection. Site creation aborted. Không có đối tượng hợp lệ nào trong vùng được chọn. Đã hủy tạo công trường. - + Node Tools Công cụ nút - + Reset nodes Đặt lại nút - + Edit nodes Chỉnh sửa nút - + Extend nodes Mở rộng các nút - + Extends the nodes of this element to reach the nodes of another element Mở rộng các nút của phần tử này để nối với các nút của phần tử khác - + Connect nodes Nối các nút với nhau - + Connects nodes of this element with the nodes of another element Nối các nút của phần tử này với các nút của phần tử khác - + Toggle all nodes Chuyển đổi tất cả các nút - + Toggles all structural nodes of the document on/off Cho phép hoặc vô hiệu hóa tất cả các nút cấu trúc của tài liệu - + Intersection found. Giao lộ được tìm thấy. @@ -2485,22 +2510,22 @@ Site creation aborted. Cửa - + Hinge Bản lề - + Opening mode Chế độ mở - + Get selected edge Lấy một cạnh được chọn - + Press to retrieve the selected edge Nhấn để chọn cạnh đã chọn @@ -2530,17 +2555,17 @@ Site creation aborted. Lớp mới - + Wall Presets... Tùy chọn tường... - + Hole wire Dây điện - + Pick selected Chọn các đối tượng đã được chọn @@ -2625,17 +2650,17 @@ Site creation aborted. Vật thể này không có bề mặt - + Space boundaries Phần bao không gian - + Error: Unable to modify the base object of this wall Lỗi: Bạn không thể sửa đổi đối tượng cơ bản của bức tường này - + Window elements Các bộ phận của cửa sổ @@ -2747,7 +2772,7 @@ Việc tạo toà nhà bị gián đoạn. Tất cả đều tốt! Không tìm thấy vấn đề nào - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Đối tượng không có thuộc tính IfcProperties. Hủy tạo bảng tính cho đối tượng: @@ -2930,47 +2955,47 @@ Việc tạo tầng bị gián đoạn. Không có bảng tính nào được đính kèm với thời gian biểu này - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center Trung tâm - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2981,77 +3006,77 @@ Các đối tượng khác đều sẽ bị loại bỏ. Lưu ý: Bạn có thể thay đổi điều đó trong mục tùy chọn. - + Choose another Structure object: Chọn bộ phận kết cấu khác: - + The chosen object is not a Structure Đối tượng được chọn không phải là một kết cấu - + The chosen object has no structural nodes Đối tượng được chọn không có các nút kết cấu - + One of these objects has more than 2 nodes Một trong những đối tượng này có nhiều hơn 2 nút - + Unable to find a suitable intersection point Không thể tìm thấy điểm giao nhau phù hợp - + Intersection found. Giao lộ đã được xác định. - + The selected wall contains no subwall to merge Bức tường đã chọn không chứa tường bao để hợp nhất - + Cannot compute blocks for wall Không thể tính toán các khối cho tường - + Choose a face on an existing object or select a preset Chọn một bề mặt trên một đối tượng hiện có hoặc chọn một giá trị đặt trước - + Unable to create component Không thể tạo thành phần - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Số lượng dây xác định một lỗ trong đối tượng lưu trữ. Giá trị bằng 0 tức là chương trình sẽ tự động áp dụng dây lớn nhất - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. không tìm thấy mô-đun "pycollada", hỗ trợ cho "collada" bị tắt. @@ -3091,7 +3116,7 @@ Lưu ý: Bạn có thể thay đổi điều đó trong mục tùy chọn.Lỗi: phiên bản IfcOpenShell của bạn quá cũ - + Successfully written Đã viết thành công @@ -3101,7 +3126,7 @@ Lưu ý: Bạn có thể thay đổi điều đó trong mục tùy chọn.Hình thành với các đường cong tìm thấy, triangulation (tiếp cận bằng cách sử dụng đường thẳng) - + Successfully imported Đã nhập thành công @@ -3117,45 +3142,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Thêm đối tượng đã chọn - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Trái + + + + Right + Phải + + + + Use sketches + Sử dụng bản phác thảo + + + + Structure + Kết cấu + + + + Window + Cửa sổ + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3368,21 +3508,16 @@ You can change that in the preferences. Checks the selected objects for problems Kiểm soát sự cố cho các đối tượng đã chọn - - - Explore the contents of an IFC file - Khám phá nội dung của tệp IFC - Arch_CloneComponent - + Clone component Thành phần Clone - + Clones an object as an undefined architectural component Nhân bản một đối tượng dưới dạng phần tử kiến trúc không xác định @@ -3403,12 +3538,12 @@ You can change that in the preferences. Arch_Component - + Component Thành phần - + Creates an undefined architectural component Tạo một đối tượng dưới dạng phần tử kiến trúc không xác định @@ -3442,12 +3577,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3541,23 +3676,15 @@ You can change that in the preferences. Ẩn các dấu trên bề mặt - - Arch_IfcExplorer - - - Ifc Explorer - Thiết bị thăm dò Ifc - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Tạo bảng tính IFC... - + Creates a spreadsheet to store IFC properties of an object. Tạo bảng tính để lưu các thuộc tính IFC của đối tượng. @@ -3586,12 +3713,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls Kết hợp những bức tường - + Merges the selected walls, if possible Hợp nhất các bức tường được chọn (nếu có thể) @@ -3797,12 +3924,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Mặt phẳng cắt - + Creates a section plane object, including the selected objects Tạo một đối tượng mặt phẳng cắt bao gồm những đối tượng đã chọn @@ -3823,12 +3950,12 @@ You can change that in the preferences. Arch_Site - + Site Công trường - + Creates a site object including selected objects. Tạo một đối tượng công trường bao gồm các đối tượng đã chọn. @@ -3875,12 +4002,12 @@ You can change that in the preferences. Arch_Structure - + Structure Kết cấu - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Tạo một đối tượng kết cấu từ đầu hoặc từ một đối tượng đã chọn (bản phác thảo, dây dẫn, bề mặt hoặc vật thể rắn) @@ -3888,12 +4015,12 @@ You can change that in the preferences. Arch_Survey - + Survey Khảo sát - + Starts survey Bắt đầu khảo sát @@ -3901,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Bật hoặc tắt cờ IFC Brep - + Force an object to be exported as Brep or not Bắt buộc một đối tượng phải được xuất dưới dạng Brep hay không @@ -3914,12 +4041,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Bật / tắt các thành phần phụ - + Shows or hides the subcomponents of this object Hiển thị hoặc ẩn các thành phần phụ của đối tượng này @@ -3940,12 +4067,12 @@ You can change that in the preferences. Arch_Window - + Window Cửa sổ - + Creates a window object from a selected object (wire, rectangle or sketch) Tạo một đối tượng cửa sổ từ đầu hoặc từ một đối tượng đã chọn (dây dẫn, hình chữ nhật hoặc bản phác thảo) @@ -4216,7 +4343,7 @@ You can change that in the preferences. Draft - + Writing camera position Viết vị trí camera @@ -4652,7 +4779,7 @@ You can change that in the preferences. Độ trong suốt: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Một số người xem IFC không thích các đối tượng được xuất dưới dạng tính năng bổ sung. Sử dụng điều này để buộc tất cả các đối tượng được xuất ra dưới dạng hình học BREP. @@ -4692,7 +4819,7 @@ You can change that in the preferences. Độ dày - + Force export as Brep Buộc phải xuất ra dưới dạng hình học Brep @@ -4722,7 +4849,7 @@ You can change that in the preferences. DAE - + Export options Tuỳ chọn xuất @@ -4932,22 +5059,22 @@ You can change that in the preferences. Bật hình vuông - + Use triangulation options set in the DAE options page Cài đặt tùy chọn tam giác trên trang tùy chọn DAE - + Use DAE triangulation options Sử dụng các tùy chọn tam giác DAE - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Các hình dạng cong, không thể được biểu diễn dưới dạng các kho chứa trong IFC, được phân tách thành các mặt phẳng. Khi bật, việc tính toán bổ sung được thực hiện để tạo ra các mặt đồng phẳng. - + Join coplanar facets when triangulating Kết hợp các phần tử mạng song song phẳng trong quá trình tạo lưới tam giác @@ -4987,12 +5114,12 @@ You can change that in the preferences. Nhập các thuộc tính Ifc vào bảng tính - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions Khi xuất các đối tượng mà không có UID thì UID được tạo ra sẽ được lưu trữ trong FreeCAD để tái sử dụng trong lần xuất đối tượng này tiếp theo, điều này tạo nên sự khác biệt khá nhỏ giữa các phiên bản - + Store IFC universal ID in FreeCAD objects Lưu ID IFC toàn cầu vào dữ liệu FreeCAD @@ -5062,17 +5189,17 @@ You can change that in the preferences. Tách bức tường nhiều lớp - + Warning, experimental feature! Cảnh báo, Tính năng đang thử nghiệm! - + Use IfcOpenShell serializer if available Sử dụng bộ nối tiếp IfcOpenShell nếu có thể - + Export 2D objects as IfcAnnotations Xuất các đối tượng 2D dưới dạng IfcAnnotations @@ -5097,12 +5224,12 @@ You can change that in the preferences. Tùy chỉnh chế độ xem khi nhập - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. Khi chọn ô này, tất cả thuộc tính của các đối tượng FreeCAD sẽ được lưu trữ trong các đối tượng được xuất ra để có thể tạo được mô hình tham số hoàn chỉnh khi nhập lại. - + Export full FreeCAD parametric model Xuất mô hình tham số FreeCAD hoàn chỉnh @@ -5157,22 +5284,22 @@ You can change that in the preferences. Danh sách loại trừ: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5237,14 +5364,49 @@ You can change that in the preferences. Màu đường vẽ - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm index 9dd3bfac98..1019c50068 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index c8716c577f..667fb253cc 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -44,12 +44,12 @@ 这个组件正在复制的对象 - + Other shapes that are appended to this object 附加到此对象的其他形状 - + Other shapes that are subtracted from this object 从该对象中减去的其他形状 @@ -79,7 +79,7 @@ 此对象所有垂直面的面积 - + The area of the projection of this object onto the XY plane 此对象在 XY 平面上的投影面积 @@ -114,7 +114,7 @@ 地板的计算面积 - + The placement of this object 此对象的位置 @@ -144,12 +144,12 @@ 轮廓绕其拉伸轴的旋转 - + The length of this element, if not based on a profile 该元素长度, 其不基于轮廓 - + The width of this element, if not based on a profile 该元素宽度, 其不基于轮廓 @@ -194,22 +194,22 @@ 此面板的面积 - + The facemaker type to use to build the profile of this object 用于生成此对象轮廓的面生成器类型 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 该对象的法向拉伸方向((0,0,0)表示自动法向) - + The linked object 链接的对象 - + The line width of the rendered objects 着色对象的线宽 @@ -251,7 +251,7 @@ The position of the tag text. Keep (0,0,0) for center position - The position of the tag text. Keep (0,0,0) for center position + 标签文本的位置。保持 (0,0,0) 为中心位置。 @@ -349,7 +349,7 @@ 此元素的高度 - + The structural nodes of this element 这个元素的结构节点 @@ -614,132 +614,132 @@ 要将结果打印到上面的电子表格 - + If false, non-solids will be cut too, with possible wrong results. 如果是假的, 非固态的也会被剪切, 可能会有错误的结果。 - + The display length of this section plane 此剖面的显示长度 - + The display height of this section plane 此剖面平面的显示高度 - + The size of the arrows of this section plane 此剖面箭头的大小 - + Show the cut in the 3D view 在3D 视图中显示修剪 - + The rendering mode to use 要使用的渲染模式 - + If cut geometry is shown or not 几何属性是否显示 - + If cut geometry is filled or not 几何属性是否填充 - + The size of the texts inside this object 此对象内文本的大小 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果选中, 则无论在3D 模型中是否可见, 都将显示源对象 - + The base terrain of this site 本网站的基本地形 - + The postal or zip code of this site 本网站的邮政或邮政编码 - + The city of this site 本网站的城市 - + The country of this site 本网站的国家 - + The latitude of this site 本网站的纬度 - + Angle between the true North and the North direction in this document 本文档中真正的北与北方向之间的夹角 - + The elevation of level 0 of this site 本网站0级的海拔 - + The perimeter length of this terrain 这一地形的周长 - + The volume of earth to be added to this terrain 要添加到这一地形的地球体积 - + The volume of earth to be removed from this terrain 从这个地形中移除的地球体积 - + An extrusion vector to use when performing boolean operations 执行布尔运算时使用的拉伸向量 - + Remove splitters from the resulting shape 从生成的形状中删除拆分器 - + Show solar diagram or not 是否显示太阳图表 - + The scale of the solar diagram 太阳图表的比例 - + The position of the solar diagram 太阳图表的位置 - + The color of the solar diagram 太阳图表的颜色 @@ -785,81 +785,76 @@ - A zone this space is part of - 此空间属于的区域 - - - The number of people who typically occupy this space 通常占据这个空间的人的数量 - + The electric power needed to light this space in Watts 需要用来照亮这个空间的瓦特电力 - + The electric power needed by the equipment of this space in Watts 该设备所需要的瓦特电力 - + If True, Equipment Power will be automatically filled by the equipment included in this space 如果为 对的, 设备电源将自动由此空间中包含的设备填充 - + The type of air conditioning of this space 此空间的空调类型 - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data 要显示的文本。使用$area，$label，$label，$tag，$floor，$floor，$walls，$ceiling来插入各自的数据 - + The name of the font 字体的名称 - + The color of the area text 区域文本的颜色 - + The size of the text font 文本字体的大小 - + The size of the first line of text 文本第一条线的大小 - + The space between the lines of text 文本线条之间的间距 - + The position of the text. Leave (0,0,0) for automatic position 文本的位置。保持 (00, 0) 自动位置 - + The justification of the text 文本的合理性 - + The number of decimals to use for calculated texts 计算文本所用的小数个数 - + Show the unit suffix 显示单元后缀 @@ -939,102 +934,102 @@ 楼梯边界与结构之间的偏移 - + An optional extrusion path for this element 此元素的可选拉伸路径 - + The height or extrusion depth of this element. Keep 0 for automatic 此元素的高度或拉伸深度。自动设定的场合保持0 - + A description of the standard profile this element is based upon 此元素基于的标准轮廓描述 - + Offset distance between the centerline and the nodes line 中线和节点线之间的偏移距离 - + If the nodes are visible or not 如果节点可见或未显示 - + The width of the nodes line 节点线的宽度 - + The size of the node points 节点的大小 - + The color of the nodes line 节点线的颜色 - + The type of structural node 结构节点类型 - + Axes systems this structure is built on 该结构基于的轴网系统 - + The element numbers to exclude when this structure is based on axes 当结构是基于轴上的，要排除元素编号 - + If true the element are aligned with axes 如果为真的, 则元素与坐标轴对齐 - + The length of this wall. Not used if this wall is based on an underlying object 墙体厚度. 当墙基于基对象时则不使用 - + The width of this wall. Not used if this wall is based on a face 墙体宽度. 当墙基于一个面时则不使用 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid 这面墙的高度。保持0自动。如果这面墙是基于固体则不使用 - + The alignment of this wall on its base object, if applicable 如果适用，此墙在其基对象上的对齐方式 - + The face number of the base object used to build this wall 用于建成此墙的基对象的面号 - + The offset between this wall and its baseline (only for left and right alignments) 此墙与其基准线之间的偏移量 (仅用于左右对齐) - + The normal direction of this window 此窗口的正常方向 - + The area of this window 此面板的面积 @@ -1049,7 +1044,7 @@ 在挤压之前添加到配置文件中的可选附加位置 - + Opens the subcomponents that have a hinge defined 打开具有铰链的子组件 @@ -1089,12 +1084,12 @@ 层厚度列表 - + The line color of the projected objects 投影对象的线条颜色 - + The color of the cut faces (if turned on) 剪切面的颜色 (如果打开) @@ -1104,7 +1099,7 @@ 在线底部上的侧桁重叠部分 - + The number of the wire that defines the hole. A value of 0 means automatic 定义孔的线数。值0表示自动 @@ -1194,7 +1189,7 @@ 钢筋的自定义间距 - + Shape of rebar 钢筋形状 @@ -1204,17 +1199,17 @@ 如果方向错了，翻转屋顶方向 - + Shows plan opening symbols if available 如果有的话，显示计划开放符号 - + Show elevation opening symbols if available 如果有的话，显示仰角开放符号 - + The objects that host this window 承载此窗口的对象 @@ -1269,12 +1264,12 @@ 此级别的(0,0,0) 点的级别 - + The shape of this object 此对象的形状 - + The line width of this object 此对象的线条宽度 @@ -1336,7 +1331,7 @@ The individual face colors - The individual face colors + 个人面部颜色 @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object 此对象的透明度 - + The color of this object 此对象的颜色 - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) 切割平面和实际视图切割之间的距离 (保持一个非常小的值, 但不是零) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website 在地图网站中显示此地点的 url - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates 模型 (0, 0, 0) 原点与地理坐标指示的点之间的可选偏移量 - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks 启用此功能可从墙体生成砖块 - + The length of each block 每个砖块的长度 - + The height of each block 每个砖块的高度 - + The horizontal offset of the first line of blocks 第一行砖块的水平偏移量 - + The horizontal offset of the second line of blocks 第二行砖块的水平偏移量 - + The size of the joints between each block 每个砖块之间接缝的大小 - + The number of entire blocks 整块砖块的数量 - + The number of broken blocks 断开的砖块的数量 - + The components of this window 此窗口的组件 - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. 此窗口在其宿主对象中形成的孔的深度。如果为 0, 则将自动计算该值。 - + An optional object that defines a volume to be subtracted from hosts of this window 一个可选对象, 用于定义要从此窗口所在的主体减去的体积。 - + The width of this window - The width of this window + 窗口的宽度 - + The height of this window - The height of this window + 窗口的高度 - + The preset number this window is based on 此窗口所基于的预设编号 - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements 百叶窗组件的宽度 - + The space between louvre elements 百叶窗组件之间的空间 - + The number of the wire that defines the hole. If 0, the value will be calculated automatically 导线的数量，由此定义孔的数量。如果为 0, 则将自动计算该值 @@ -1629,14 +1624,14 @@ The number of posts used to build the fence - + The type of this object - The type of this object + 此对象的类型 IFC data - IFC data + IFC 数据 @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - Show compass or not + 是否显示指南针 - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components 组件 @@ -1717,12 +1742,12 @@ 创建轴线 - + Remove 删除 - + Add 添加 @@ -1832,87 +1857,87 @@ 视图 - + Create Section Plane 创建剖切面 - + Create Site 创建场地 - + Create Structure 创建结构体 - + Create Wall 创建墙 - + Width 宽度 - + Height 高度 - + Error: Invalid base object 错误:无效的基对象 - + This mesh is an invalid solid 该网格是无效实体 - + Create Window 创建窗 - + Edit 编辑 - + Create/update component 创建/更新组件 - + Base 2D object 二维基对象 - + Wires 线框 - + Create new component 创建新组件 - + Name 名称 - + Type 类型 - + Thickness 厚度 @@ -1922,7 +1947,7 @@ 错误:无法确定字符编码 - + file %s successfully created. 文件%s已成功创建. @@ -1972,32 +1997,32 @@ 创建楼梯 - + Length 长度 - + Error: The base shape couldn't be extruded along this tool object 错误: 无法沿此工具对象拉伸底部形状 - + Couldn't compute a shape 无法计算形状 - + Merge Wall 合并壁 - + Please select only wall objects 请选择只有墙上的对象 - + Merge Walls 合并壁 @@ -2012,7 +2037,7 @@ 计算此对象形状时出的错 - + Create Structural System 创建结构体系 @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 高度(毫米) - + Create Component 新增组件 @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 墙壁只能基于零件或网格对象 - + Set text position 设置文本位置 - + Category 类别 - + Key 关键字 @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 值 - + Unit 单位 - + Create IFC properties spreadsheet 创建 IFC 属性电子表格 @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 创建面板表 - + Facemaker returned an error 服务器返回一个错误 @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 创建连接器 - + Precast elements 预制品 - + Slab type 楼板类型 - + Chamfer 倒直角 - + Dent length 凹痕长度 - + Dent width 凹痕宽度 - + Dent height 凹坑高度 - + Slab base 楼板底部 - + Number of holes 孔数 - + Major diameter of holes 孔的主要直径 - + Minor diameter of holes 小孔直径 - + Spacing between holes 孔间距 - + Number of grooves 凹槽数 - + Depth of grooves 凹槽深度 - + Height of grooves 沟槽高度 - + Spacing between grooves 凹槽间距 - + Number of risers 竖管数 - + Length of down floor 底层长度 - + Height of risers 冒口高度 - + Depth of treads 踏面深度 - + Precast options 预制选项 - + Dents list 凹痕名单 - + Add dent 添加凹痕 - + Remove dent 去删凹痕 - + Slant 倾斜文本 - + Level 水平 - + Rotation 旋转 - + Offset 偏移 @@ -2422,58 +2447,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 时间表 - + There is no valid object in the selection. Site creation aborted. 所选内容中没有有效的对象。网站创建中止。 - + Node Tools 节点工具 - + Reset nodes 重置节点 - + Edit nodes 编辑节点 - + Extend nodes 延伸节点 - + Extends the nodes of this element to reach the nodes of another element 延伸此元素的节点以到达另一个元素的节点 - + Connect nodes 连接节点 - + Connects nodes of this element with the nodes of another element 将此元素的节点与另一个元素的节点连接 - + Toggle all nodes 切换所有节点 - + Toggles all structural nodes of the document on/off 切换文档的所有结构节点开/关 - + Intersection found. 找到交集 @@ -2485,22 +2510,22 @@ Site creation aborted. 门 - + Hinge 铰链 - + Opening mode 打开模式 - + Get selected edge 获取所选边缘 - + Press to retrieve the selected edge 按下去来检索选定的边缘 @@ -2530,17 +2555,17 @@ Site creation aborted. 新图层 - + Wall Presets... 墙壁预设..。 - + Hole wire 孔线 - + Pick selected 选取选定的 @@ -2625,17 +2650,17 @@ Site creation aborted. 此对象没有面 - + Space boundaries 空间边界 - + Error: Unable to modify the base object of this wall 错误: 无法修改此墙的基础对象 - + Window elements 窗口构件 @@ -2729,7 +2754,7 @@ Building creation aborted. BuildingPart - BuildingPart + 构建组件 @@ -2747,7 +2772,7 @@ Building creation aborted. 一切正常! 未发现问题 - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: 该对象没有 IfcProperties 属性。取消对象的电子表格创建: @@ -2930,47 +2955,47 @@ Floor creation aborted. 没有附加到此计划的电子表格 - + Section plane settings 截面平面设置 - + Objects seen by this section plane: 剖面中所看到的对象: - + Section plane placement: 截面平面放置: - + Rotate X 沿 X 轴旋转 - + Rotate Y 旋转 Y - + Rotate Z 绕Z轴旋转 - + Resize 调整尺寸 - + Center 中心 - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2981,77 +3006,77 @@ Note: You can change that in the preferences. 备注：您可以在 "首选项" 中更改该选项。 - + Choose another Structure object: 选择另一个构造对象: - + The chosen object is not a Structure 所选对象不是构造体 - + The chosen object has no structural nodes 所选对象没有构造节点 - + One of these objects has more than 2 nodes 其中一个对象有超过2节点 - + Unable to find a suitable intersection point 无法找到合适的交点 - + Intersection found. 找到交集 - + The selected wall contains no subwall to merge 在所选的墙上包含没有次墙来合并 - + Cannot compute blocks for wall 无法计算墙体砖块量 - + Choose a face on an existing object or select a preset 在现有对象上选取一个面或选择一个预设 - + Unable to create component 无法创建组件 - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire 线的数目在主体对象中定义一个孔。值为零时将自动采用最大线数 - + + default - + default + + 默认 - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada 未找到, collada 支持被禁用。 @@ -3091,7 +3116,7 @@ Note: You can change that in the preferences. 错误: 您的 IfcOpenShell 版本太旧 - + Successfully written 写入成功 @@ -3101,7 +3126,7 @@ Note: You can change that in the preferences. 找到一个包含曲线的形状, 正在变成三角. - + Successfully imported 导入成功 @@ -3117,45 +3142,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected 添加所选 - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + 左视 + + + + Right + 右视 + + + + Use sketches + 使用草图 + + + + Structure + 结构 + + + + Window + 窗口 + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3348,7 +3488,7 @@ You can change that in the preferences. BuildingPart - BuildingPart + 构建组件 @@ -3368,21 +3508,16 @@ You can change that in the preferences. Checks the selected objects for problems 检查所选对象的问题 - - - Explore the contents of an IFC file - 浏览 IFC 文件的内容 - Arch_CloneComponent - + Clone component 克隆组件 - + Clones an object as an undefined architectural component 将对象克隆为未定义的建筑组件 @@ -3403,12 +3538,12 @@ You can change that in the preferences. Arch_Component - + Component 组件 - + Creates an undefined architectural component 创建未定义的建筑组件 @@ -3442,12 +3577,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3541,23 +3676,15 @@ You can change that in the preferences. 隐藏的面索引 - - Arch_IfcExplorer - - - Ifc Explorer - IFC导出 - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... 创建 IFC 电子表格..。 - + Creates a spreadsheet to store IFC properties of an object. 创建一个电子表格以存储对象的ifc 属性。 @@ -3586,12 +3713,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls 合并壁 - + Merges the selected walls, if possible 如果可能，合并选定的墙壁 @@ -3797,12 +3924,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 剖切平面 - + Creates a section plane object, including the selected objects 创建剖切平面对象,包括所选对象 @@ -3823,12 +3950,12 @@ You can change that in the preferences. Arch_Site - + Site 场地 - + Creates a site object including selected objects. 创建场地,包含选定对象 @@ -3875,12 +4002,12 @@ You can change that in the preferences. Arch_Structure - + Structure 结构 - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) 从零开始或从选定的对象(线,面或体)创建结构体 @@ -3888,12 +4015,12 @@ You can change that in the preferences. Arch_Survey - + Survey 调查 - + Starts survey 开始调查 @@ -3901,12 +4028,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag 切换 IFC Brep 标志 - + Force an object to be exported as Brep or not 强制是否将对象导出为 Brep @@ -3914,12 +4041,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents 切换子组件 - + Shows or hides the subcomponents of this object 显示或隐藏此对象的子组件 @@ -3940,12 +4067,12 @@ You can change that in the preferences. Arch_Window - + Window 窗 - + Creates a window object from a selected object (wire, rectangle or sketch) 从所选对象创建窗对象(线框、矩形或草绘) @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position 写入相机位置 @@ -4653,7 +4780,7 @@ You can change that in the preferences. 透明度: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. 一些IFC阅读器不喜欢对象导出为拉伸。使用此项可强制将所有对象导出为 BREP几何体。 @@ -4693,7 +4820,7 @@ You can change that in the preferences. 厚度 - + Force export as Brep 强制导出为 Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. 日期 - + Export options 导出选项 @@ -4933,22 +5060,22 @@ You can change that in the preferences. 允许四方形 - + Use triangulation options set in the DAE options page 使用 "DAE 选项" 页中设置的三角选项 - + Use DAE triangulation options 使用 DAE 三角选项 - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. 在 IFC 中不能表示为曲线的曲面被分解为平面。如果选中此项, 将进行一些额外的计算以联接共面平面。 - + Join coplanar facets when triangulating 当构建三角时加入共面平面 @@ -4988,12 +5115,12 @@ You can change that in the preferences. 在电子表格中导入 Ifc 属性 - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions 在导出不带 uid 的对象时, 生成的 uid 将存储在 FreeCAD 对象中, 以便在下次导出对象时重用, 从而在版本之间提供较小的差异 - + Store IFC universal ID in FreeCAD objects 在 FreeCAD 对象中存储 IFC 通用 ID @@ -5063,17 +5190,17 @@ You can change that in the preferences. 拆分多层墙 - + Warning, experimental feature! 警告, 实验功能! - + Use IfcOpenShell serializer if available 使用 IfcOpenShell 序列化程序 (如果可用) - + Export 2D objects as IfcAnnotations 将2D 对象导出为 IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. 导入时调整视图 - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. 如果选中此项, 则所有 FreeCAD 对象属性都将存储在导出的对象中, 这样允许在导入上重新导入时可以重新创建完整的参数化模型。 - + Export full FreeCAD parametric model 导出全 FreeCAD 参数模型 @@ -5158,22 +5285,22 @@ You can change that in the preferences. 排除列表: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans 如果选中此选项, 则在可能的情况下, 类似的实体将仅在文件中使用一次。这可以减少大量的文件大小, 但将使其不太容易被人类阅读 - + Reuse similar entities 重复使用类似实体 - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). 在可能的情况下, 被拉伸矩形的 ifc 对象将导出为 ifcrectangt塘 profiledef。但是, 其他一些应用程序在导入该实体时存在问题。如果这是您的情况, 您可以在此处禁用此功能 (所有配置文件将导出为 ifc意末关 profiledef)。 - + Disable IfcRectangleProfileDef 禁用 ifcrectangleprofiledef @@ -5238,14 +5365,49 @@ You can change that in the preferences. 线条颜色 - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm index 7193c8d8e6..b305dd3bad 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 98778e33cf..bc39949ea2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -44,12 +44,12 @@ 這個組件的對象是複製的 - + Other shapes that are appended to this object 附加到此對象的其他形狀 - + Other shapes that are subtracted from this object 從這個對象中減去的其他形狀 @@ -79,7 +79,7 @@ 這個對象所有垂直面的面積 - + The area of the projection of this object onto the XY plane 這個對象在 XY 平面上的投影面積 @@ -114,7 +114,7 @@ 這個樓層的計算樓面面積 - + The placement of this object 這個對象的位置 @@ -144,12 +144,12 @@ 輪廓繞著拉伸軸旋轉 - + The length of this element, if not based on a profile 該元素的長度，如果不是基於輪廓 - + The width of this element, if not based on a profile 該元素的寬度，如果不是基於輪廓 @@ -194,22 +194,22 @@ 這個面板的面積 - + The facemaker type to use to build the profile of this object 用於生成此對象輪廓的 facemaker 類型 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 該對象的法向拉伸方向(保持 (0,0,0) 表示自動法向) - + The linked object 鏈接的對象 - + The line width of the rendered objects 著色對象的線寬 @@ -349,7 +349,7 @@ The height of this element - + The structural nodes of this element The structural nodes of this element @@ -614,132 +614,132 @@ 要將結果列印到的試算表上 - + If false, non-solids will be cut too, with possible wrong results. 如果是假的，非固態的也會被剪切，可能會有錯誤的結果。 - + The display length of this section plane 此剖面的顯示長度 - + The display height of this section plane 此剖面的顯示高度 - + The size of the arrows of this section plane 此剖面箭頭的大小 - + Show the cut in the 3D view 在3 D 視圖中顯示修剪 - + The rendering mode to use 要使用的渲染模式 - + If cut geometry is shown or not 是否顯示修剪幾何 - + If cut geometry is filled or not 修剪幾何是否填充 - + The size of the texts inside this object 此對象內文本的大小 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果選中，則無論在 3D 模型中是否可見，都將顯示源對象 - + The base terrain of this site 本地點的基本地形 - + The postal or zip code of this site 本地點的郵政或郵遞區號 - + The city of this site 本地點的城市 - + The country of this site 本地點的國家 - + The latitude of this site 本地點的緯度 - + Angle between the true North and the North direction in this document 本文檔中真正的北與北方向之間的夾角 - + The elevation of level 0 of this site 這個地點 0 級的海拔 - + The perimeter length of this terrain 這一地形的周長 - + The volume of earth to be added to this terrain 要添加到這一地形的地球體積 - + The volume of earth to be removed from this terrain 從這個地形中移除的地球體積 - + An extrusion vector to use when performing boolean operations 執行布爾運算時使用的拉伸向量 - + Remove splitters from the resulting shape 從生成的形狀中移除拆分器 - + Show solar diagram or not Show solar diagram or not - + The scale of the solar diagram The scale of the solar diagram - + The position of the solar diagram The position of the solar diagram - + The color of the solar diagram The color of the solar diagram @@ -785,81 +785,76 @@ - A zone this space is part of - A zone this space is part of - - - The number of people who typically occupy this space The number of people who typically occupy this space - + The electric power needed to light this space in Watts The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font - + The color of the area text The color of the area text - + The size of the text font The size of the text font - + The size of the first line of text The size of the first line of text - + The space between the lines of text The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + The justification of the text The justification of the text - + The number of decimals to use for calculated texts The number of decimals to use for calculated texts - + Show the unit suffix Show the unit suffix @@ -939,102 +934,102 @@ The offset between the border of the stairs and the structure - + An optional extrusion path for this element An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points 節點的大小 - + The color of the nodes line 節點線的顏色 - + The type of structural node 結構節點的類型 - + Axes systems this structure is built on 這個結構是建立在軸系上的 - + The element numbers to exclude when this structure is based on axes 當這個結構是基於軸時要排除的元素編號 - + If true the element are aligned with axes 如果為真的，則元素與坐標軸對齊 - + The length of this wall. Not used if this wall is based on an underlying object 牆體厚度。如果牆基於底層對象，則不使用 - + The width of this wall. Not used if this wall is based on a face 牆體寬度。如果牆基於一個面時，則不使用 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid 牆體高度。保持0自动。如果牆基於實體，則不使用 - + The alignment of this wall on its base object, if applicable 如果適用，將該牆壁對準其基礎對象 - + The face number of the base object used to build this wall 用於建成此牆的基對象的面號 - + The offset between this wall and its baseline (only for left and right alignments) 此牆與其基準線之間的偏移量(僅用於左右對齊) - + The normal direction of this window 此窗口的正常方向 - + The area of this window 此窗口的區域 @@ -1049,7 +1044,7 @@ An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined Opens the subcomponents that have a hinge defined @@ -1089,12 +1084,12 @@ 層厚度清單 - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) 修剪面的顏色 (如果打開) @@ -1104,7 +1099,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1194,7 +1189,7 @@ The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1204,17 +1199,17 @@ Flip the roof direction if going the wrong way - + Shows plan opening symbols if available Shows plan opening symbols if available - + Show elevation opening symbols if available Show elevation opening symbols if available - + The objects that host this window The objects that host this window @@ -1269,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1414,47 +1409,47 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site The region, province or county of this site - + A url that shows this site in a mapping website A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + Specifies if this space is internal or external Specifies if this space is internal or external @@ -1504,97 +1499,97 @@ The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks - + The components of this window The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window The width of this window - + The height of this window The height of this window - + The preset number this window is based on The preset number this window is based on - + The frame size of this window The frame size of this window - + The offset size of this window The offset size of this window - + The width of louvre elements The width of louvre elements - + The space between louvre elements The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically The number of the wire that defines the hole. If 0, the value will be calculated automatically @@ -1629,7 +1624,7 @@ The number of posts used to build the fence - + The type of this object The type of this object @@ -1644,42 +1639,42 @@ IFC properties of this object - + Description of IFC attributes are not yet implemented Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not Show compass or not - + The rotation of the Compass relative to the Site The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation Update the Declination value based on the compass rotation @@ -1693,11 +1688,41 @@ The 'right outline' of all segments of stairs The 'right outline' of all segments of stairs + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + Arch - + Components 組件 @@ -1717,12 +1742,12 @@ 建立軸 - + Remove 移除 - + Add 新增 @@ -1832,87 +1857,87 @@ 視圖 - + Create Section Plane 建立剖面 - + Create Site 建立地點 - + Create Structure 建立結構 - + Create Wall 建立牆面 - + Width 寬度 - + Height 高度 - + Error: Invalid base object 錯誤：錯誤的基礎物件 - + This mesh is an invalid solid 此網格為無效實體 - + Create Window 建立窗戶 - + Edit 編輯 - + Create/update component 建立/更新元件 - + Base 2D object 基礎 2D 物件 - + Wires 線 - + Create new component 建立新元件 - + Name 名稱 - + Type 類型 - + Thickness 厚度 @@ -1922,7 +1947,7 @@ 錯誤：無法定義字元編碼 - + file %s successfully created. 成功建立%s檔 @@ -1972,32 +1997,32 @@ 建立樓梯 - + Length 長度 - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall 合併牆面 - + Please select only wall objects 請僅選擇牆面物件 - + Merge Walls 合併牆面 @@ -2012,7 +2037,7 @@ Error computing the shape of this object - + Create Structural System 建立結構系統 @@ -2172,7 +2197,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 高(mm) - + Create Component Create Component @@ -2187,17 +2212,17 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Walls can only be based on Part or Mesh objects - + Set text position Set text position - + Category 類別 - + Key Key @@ -2207,12 +2232,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela 值 - + Unit 單位 - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2242,7 +2267,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Panel Sheet - + Facemaker returned an error Facemaker returned an error @@ -2267,137 +2292,137 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Create Connector - + Precast elements Precast elements - + Slab type Slab type - + Chamfer 倒角 - + Dent length Dent length - + Dent width Dent width - + Dent height Dent height - + Slab base Slab base - + Number of holes Number of holes - + Major diameter of holes Major diameter of holes - + Minor diameter of holes Minor diameter of holes - + Spacing between holes Spacing between holes - + Number of grooves Number of grooves - + Depth of grooves Depth of grooves - + Height of grooves Height of grooves - + Spacing between grooves Spacing between grooves - + Number of risers Number of risers - + Length of down floor Length of down floor - + Height of risers Height of risers - + Depth of treads Depth of treads - + Precast options Precast options - + Dents list Dents list - + Add dent Add dent - + Remove dent Remove dent - + Slant Slant - + Level Level - + Rotation Rotation - + Offset 偏移複製 @@ -2422,59 +2447,59 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Schedule - + There is no valid object in the selection. Site creation aborted. There is no valid object in the selection. Site creation aborted. - + Node Tools Node Tools - + Reset nodes Reset nodes - + Edit nodes Edit nodes - + Extend nodes Extend nodes - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connect nodes Connect nodes - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggle all nodes Toggle all nodes - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Intersection found. Intersection found. @@ -2486,22 +2511,22 @@ Site creation aborted. 門 - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2531,17 +2556,17 @@ Site creation aborted. 新圖層 - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2626,17 +2651,17 @@ Site creation aborted. This object has no face - + Space boundaries Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -2748,7 +2773,7 @@ Building creation aborted. All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -2931,47 +2956,47 @@ Floor creation aborted. No spreadsheet attached to this schedule - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize - + Center 中心 - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2982,77 +3007,77 @@ Other objects will be removed from the selection. Note: You can change that in the preferences. - + Choose another Structure object: Choose another Structure object: - + The chosen object is not a Structure The chosen object is not a Structure - + The chosen object has no structural nodes The chosen object has no structural nodes - + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall - + Choose a face on an existing object or select a preset Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here - + pycollada not found, collada support is disabled. pycollada not found, collada support is disabled. @@ -3092,7 +3117,7 @@ Note: You can change that in the preferences. Error: your IfcOpenShell version is too old - + Successfully written Successfully written @@ -3102,7 +3127,7 @@ Note: You can change that in the preferences. Found a shape containing curves, triangulating - + Successfully imported Successfully imported @@ -3118,45 +3143,160 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + Beam + Beam + + + + Column + Column + + + + Preset + Preset + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + Con&tinue + Con&tinue + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + 左 + + + + Right + 右 + + + + Use sketches + Use sketches + + + + Structure + 結構 + + + + Window + 視窗 + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + ArchMaterial @@ -3369,21 +3509,16 @@ You can change that in the preferences. Checks the selected objects for problems 檢查所選物件之問題 - - - Explore the contents of an IFC file - Explore the contents of an IFC file - Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -3404,12 +3539,12 @@ You can change that in the preferences. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -3443,12 +3578,12 @@ You can change that in the preferences. Arch_Fence - + Fence Fence - + Creates a fence object from a selected section, post and path Creates a fence object from a selected section, post and path @@ -3542,23 +3677,15 @@ You can change that in the preferences. The indices of faces to hide - - Arch_IfcExplorer - - - Ifc Explorer - Ifc 瀏覽器 - - Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -3587,12 +3714,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls 合併牆面 - + Merges the selected walls, if possible 若可行合併所選牆面 @@ -3798,12 +3925,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 剖面 - + Creates a section plane object, including the selected objects 建立剖面物件,包含選擇的物件 @@ -3824,12 +3951,12 @@ You can change that in the preferences. Arch_Site - + Site 位置 - + Creates a site object including selected objects. 建立包含選定物件之位置物件 @@ -3876,12 +4003,12 @@ You can change that in the preferences. Arch_Structure - + Structure 結構 - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) 由草圖或選定物件(草圖,線,面或固體)建立結構物件 @@ -3889,12 +4016,12 @@ You can change that in the preferences. Arch_Survey - + Survey 查詢 - + Starts survey 開始查詢 @@ -3902,12 +4029,12 @@ You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag 切換 IFC Brep 標示 - + Force an object to be exported as Brep or not 是否強制將一物件以Brep格式匯出 @@ -3915,12 +4042,12 @@ You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object @@ -3941,12 +4068,12 @@ You can change that in the preferences. Arch_Window - + Window 視窗 - + Creates a window object from a selected object (wire, rectangle or sketch) 由選定之物件(線,矩形或素描)建立窗戶物件 @@ -4217,7 +4344,7 @@ You can change that in the preferences. Draft - + Writing camera position Writing camera position @@ -4653,7 +4780,7 @@ You can change that in the preferences. 透明度： - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. @@ -4693,7 +4820,7 @@ You can change that in the preferences. 厚度 - + Force export as Brep 強制匯出為Brep @@ -4723,7 +4850,7 @@ You can change that in the preferences. DAE - + Export options 匯出選項 @@ -4933,22 +5060,22 @@ You can change that in the preferences. Allow quads - + Use triangulation options set in the DAE options page Use triangulation options set in the DAE options page - + Use DAE triangulation options Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating Join coplanar facets when triangulating @@ -4988,12 +5115,12 @@ You can change that in the preferences. 於試算表中匯入IFC屬性 - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects Store IFC universal ID in FreeCAD objects @@ -5063,17 +5190,17 @@ You can change that in the preferences. Split multilayer walls - + Warning, experimental feature! Warning, experimental feature! - + Use IfcOpenShell serializer if available Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations Export 2D objects as IfcAnnotations @@ -5098,12 +5225,12 @@ You can change that in the preferences. Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model Export full FreeCAD parametric model @@ -5158,22 +5285,22 @@ You can change that in the preferences. Exclude list: - + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans - + Reuse similar entities Reuse similar entities - + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). - + Disable IfcRectangleProfileDef Disable IfcRectangleProfileDef @@ -5238,14 +5365,49 @@ You can change that in the preferences. 線條顏色 - + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - - Auto-detet and export as standard cases when applicable - Auto-detet and export as standard cases when applicable + + Import full FreeCAD parametric definitions if available + Import full FreeCAD parametric definitions if available + + + + Auto-detect and export as standard cases when applicable + Auto-detect and export as standard cases when applicable + + + + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no site if found in the FreeCAD document, a default one will be added. A site is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default site if none is found in the document + Add default site if none is found in the document + + + + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + When exporting an IFC file, if no building if found in the FreeCAD document, a default one will be added.<br/><b>Warning</b>: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there so we have a chance to show our point of view to the world and try to convince others. + + + + Add default building if no ne is found in the document (no standard) + Add default building if no ne is found in the document (no standard) + + + + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + When exporting an IFC file, if no building storey if found in the FreeCAD document, a default one will be added. A building storey is not mandatory by the IFC standard, but it is a common practice to always have at least one in the file. + + + + Add default building storey if none is found in the document + Add default building storey if none is found in the document diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm index e1c0d90cce..462cfc9f35 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts index 1a15b3060b..a10747983c 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts @@ -345,7 +345,7 @@ value - value + érték diff --git a/src/Mod/Draft/Resources/translations/Draft_af.qm b/src/Mod/Draft/Resources/translations/Draft_af.qm index 9bbbc3a53c..9cd0f946d3 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_af.qm and b/src/Mod/Draft/Resources/translations/Draft_af.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_af.ts b/src/Mod/Draft/Resources/translations/Draft_af.ts index ab7234df6c..8c4812ee3b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_af.ts +++ b/src/Mod/Draft/Resources/translations/Draft_af.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Defines a hatch pattern - + Sets the size of the pattern Sets the size of the pattern - + Startpoint of dimension Startpoint of dimension - + Endpoint of dimension Endpoint of dimension - + Point through which the dimension line passes Point through which the dimension line passes - + The object measured by this dimension The object measured by this dimension - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter For arc/circle measurements, false = radius, true = diameter - + Font size Font size - + The number of decimals to show The number of decimals to show - + Arrow size Arrow size - + The spacing between the text and the dimension line The spacing between the text and the dimension line - + Arrow type Arrow type - + Font name Font name - + Line width Line width - + Line color Line color - + Length of the extension lines Length of the extension lines - + Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees - + Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default A unit to express the measurement. Leave blank for system default - + Start angle of the dimension Start angle of the dimension - + End angle of the dimension End angle of the dimension - + The center point of this dimension The center point of this dimension - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Length of the rectangle - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Create a face - + Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) - + Start angle of the arc Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle Radius of the circle - + The minor radius of the ellipse The minor radius of the ellipse - + The major radius of the ellipse The major radius of the ellipse - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line The start point of this line - + The end point of this line The end point of this line - + The length of this line The length of this line - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Number of faces - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text The spacing between lines of text - + The color of the projected objects The color of the projected objects - + The linked object Die geskakelde objek - + Shape Fill Style Shape Fill Style - + Line Style Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Show hidden lines - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Number of copies Number of copies - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Location - + Y Location Y Location - + Z Location Z Location - + Text string Text string - + Font file name Font file name - + Height of text Height of text - + Inter-character spacing Inter-character spacing - + Linked faces Linked faces - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object Die plasing van hierdie objek - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Basis - + PointList PointList - + Count Tel - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Skaal - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Voeg by nuwe punt - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Pas huidige styl toe - + Applies current line width and color to selected objects Wend aan huidige lynbreedte en kleur op gekose voorwerpe @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Boog - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Reeks - + Creates a polar or rectangular array from a selected object Skep 'n polêre of reghoekige reeks van 'n gekose voorwerp @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Sirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Skep 'n sirkel. CTRL om vas te heg, ALT om raaklyn voorwerpe te kies @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Kloon - + Clones the selected object(s) Kloon die gekose voorwerp(e) @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Maak lyn toe - + Closes the line being drawn Maak die huidige lyn toe @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Verwyder punt - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensioneer - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Skep 'n dimensie. CTRL om vas te het, SHIFT om vas te hou, ALT om 'n segment te kies @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Gradeer neer - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Konsep na skets - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Tekening - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Wysig - + Edits the active object Wysig die aktiewe voorwerp @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Beëindig lyn - + Finishes a line without closing it Beëindig lyn sonder om toe te maak @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Lyn - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Dit skep 'n 2-punt lyn. CTRL om vas te heg, SHIFT vas te hou @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Mirror - + Mirrors the selected objects along a line defined by two points Mirrors the selected objects along a line defined by two points @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Verskuif - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Verplasing - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Verplaas die aktiewe voorwerp. CTRL om vas te heg, SHIFT om vas te hou, ALT om te kopieer @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punt - + Creates a point object Skep 'n puntvoorwerp @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Veelhoek - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Skep 'n gelykhoekige veelhoek. CTRL om vas te heg, SHIFT om vas te hou @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Reghoek - + Creates a 2-point rectangle. CTRL to snap Skep 'n 2-punt reghoek. CTRL om vas te heg @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Roteer - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roteer die gekose objekte. CTRL om vas te heg, SHIFT om vas te hou, ALT om te kopieer @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skaal - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skaal die gekose objekte van 'n basispunt. CTRL om vas te hou, SHIFT om vas te hou, ALT om te kopieer @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Kies groep - + Selects all objects with the same parents as this group Kies al die voorwerpe met die dieselfde ouers as hierdie groep @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane KiesVlak - + Select a working plane for geometry creation Kies 'n werkende vliegtuig vir geometrieskepping @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Vorm 2D aansig - + Creates Shape 2D views of selected objects Skep vorm 2D aansigte van die gekose voorwerpe @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Snyding - + Snaps to edges intersections Snaps to edges intersections @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once - + Lock Lock @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Spesiaal - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Strek - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Teks - + Creates an annotation. CTRL to snap Skep 'n aantekening. CTRL om vas te heg @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Skakel konstruksiemodus aan/af vir die volgende voorwerpe. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Wissel die voortsettingsmodus vir die volgende bevele. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Wissel voorkomsmodus - + Swaps display mode of selected objects between wireframe and flatlines Verander vertoning van gekose voorwerpe tussen draadmodel en plat lyne @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Toggle Grid - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid Grid - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Knip of rek die gekose voorwerp, of strek 'n enkele vlak. CTRL heg, SHIFT beperk tot huidige segment of tot die normaallyn, ALT keer om @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Herstel die laaste segment - + Undoes the last drawn segment of the line being drawn Herstel die laaste getekende lynsegment @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Opgradeer - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Algemene tekeninginstellings - + This is the default color for objects being drawn while in construction mode. Dit is die versuimkleur vir voorwerpe wat geteken word in konstruksiemodus. - + This is the default group name for construction geometry Dit is die versuim groepnaam vir die konstruksiegeometrie - + Construction Konstruksie @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSpaar die huidige kleur en lynwydte vir alle sessies - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode As dit gekies is, sal kopiemodus behou word in alle bevele, anders sal bevele altyd begin in geen-kopie modus - + Global copy mode Globale kopiemodus - + Default working plane Versuim werkvlak - + None Geen - + XY (Top) XY (Bo-aansig) - + XZ (Front) XZ (Vooraansig) - + YZ (Side) YZ (Sy-aansig) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Algemene instellings - + Construction group name Konstruksie groepnaam - + Tolerance Toleransie @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Hier kan jy 'n vouer spesifiseer wat SVG-lêers bevat wat <pattern> definisies bevat wat tot die standaard Skets-mosaïekpatrone gevoeg kan word - + Draft interface mode Skets koppelvlakmodus - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Hierdie is die gebruikerskoppelvlak waarin die Tekenmodule sal werk: Nutsbalkmodus sal alle Tekeninstellings in 'n aparte nutsbalk plaas, terwyl taakbalkmodus die FreeCAD Taakaansigstelsel sal gebruik vir alle gebruiker interaksie - + Toolbar Nutsbalk - + Taskview Taakaansig @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt verandering - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Gewoonlik, na kopiëring van voorwerpe, word die kopieë gemerk. Indien hierdie opsie gekies is, word die oorspronklike voorwerpe gemerk. - + Select base objects after copying Merk/kies die oorspronklike voorwerpe na kopiëring @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Hooflyne sal dikker wees. Spesifiseer hier hoeveel ruite tussen hooflyne. - + Internal precision level Interne presisievlak @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Translate white line color to black - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Always snap (disable snap mod) - - Construction geometry - Konstruksiegeometrie - - - + Construction geometry color Construction geometry color @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Select a font file - + Fill objects with faces whenever possible Fill objects with faces whenever possible @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2714,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2794,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2884,12 +2904,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,693 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Maak toe + + + + O + O + + + + Copy + Kopieer + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Lengte + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Draft creation tools - - - - Draft modification tools - Draft modification tools - - - - Utilities - Utilities - - - - Wire tools - Draadwerktuie - - - - Snapping - Snapping - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Pas toe op gekose voorwerpe - + Autogroup off Autogroup off - + active command: aktiewe opdrag: - + None Geen - + Active Draft command Aktiewe Tekening bevel - + X coordinate of next point X-koördinaat van die volgende punt - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-koördinaat van die volgende punt - + Z coordinate of next point Z-koördinaat van die volgende punt - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length Lengte - + Angle Hoek - + Length of current segment Length of current segment - + Angle of current segment Angle of current segment - + Radius Radius - + Radius of Circle Radius van die sirkel - + If checked, command will not finish until you press the command button again As dit gemerk is, sal die opdrag nie voltooi word totdat jy die bevel weer gee nie - + If checked, an OCC-style offset will be performed instead of the classic offset Indien gekies, sal 'n OCC-styl verskuiwing gedoen word in plaas van die klassieke verskuiwing - + &OCC-style offset &OCC-styl verskuiwing - + Add points to the current object Voeg punte by die huidige voorwerp - + Remove points from the current object Verwyder punte van die huidige voorwerp - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Sides - + Number of sides Aantal sye - + Offset Verplasing - + XY (top) XY (top) - - Select XY plane - Kies XY vlak - - - + XZ (front) XZ (front) - - Select XZ plane - Kies XZ vlak - - - + YZ (side) YZ (side) - - Select YZ plane - Kies YZ-vlak - - - + View Voorkoms - - Select plane perpendicular to the current view - Kies vlak loodreg op die huidige aansig - - - + Auto Auto - - Do not project points to a drawing plane - Moenie punte projekteer na 'n tekeningvlak nie - - - + Text string to draw Text string to draw - + String String - + Height of text Height of text - + Height Hoogte - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing Ruitnet spasiëring - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Kies vlak - - - + Line Lyn - + DWire DWire - + Circle Sirkel - + Center X Sentreer X - + Arc Boog - + Point Punt - + Label Label - + Distance Afstand - + Trim Vernou - + Pick Object Kies voorwerp - + Edit Wysig - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Autogroup: Autogroup: - + Faces Vlakke - + Remove Verwyder - + Add Voeg by - + Facebinder elements Facebinder elements - + Create Line Create Line - - Pick next point: - - Kies die volgende punt: - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Create BezCurve - + Rectangle Reghoek - + Create Plane Create Plane - + Create Rectangle Skep Reghoek - + Create Circle Skep Sirkel - + Create Arc Skep Boog - + Start Angle Beginhoek - + Aperture Gaping - + Polygon Veelhoek - + Create Polygon Skep Veelvlak - + Ellipse Ellipse - + Create Ellipse Create Ellipse - + Text Teks - + Create Text Skep Teks - + Dimension Dimensioneer - + Create Dimension Skep Dimensie - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Kopieer - + Move Verskuif - + Change Style Verander Styl - + Rotate Roteer - - Cannot offset this object type - - Kan nie hierdie voorwerptipe verskuif nie - - - + Stretch Strek - + Upgrade Opgradeer - + Downgrade Gradeer neer - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Convert - + Array Reeks - + Create Point Create Point - + Mirror Mirror - + &Draft &Draft @@ -3610,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Maak toe @@ -3827,7 +3995,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3842,7 +4010,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3857,454 +4025,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Voltooi - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Versuiminstelling - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4314,56 +4307,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Skaal - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Bo-aansig + + + + Front + Vooraansig + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Draft + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilities + + + + Wire tools + Draadwerktuie + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.qm b/src/Mod/Draft/Resources/translations/Draft_ar.qm index 6073791082..f47b62fb0e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ar.qm and b/src/Mod/Draft/Resources/translations/Draft_ar.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.ts b/src/Mod/Draft/Resources/translations/Draft_ar.ts index a98900e835..3faedca405 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ar.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ar.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern يحدد نمط فتحة - + Sets the size of the pattern لتعيين حجم النمط - + Startpoint of dimension نقطة البداية من البعد - + Endpoint of dimension نقطة النهاية للبعد - + Point through which the dimension line passes النقطة التي يمر بها خط البعد - + The object measured by this dimension الكائن المقاس بهذا البعد - + The geometry this dimension is linked to الهندسة المرتبطة بهذا البعد - + The measurement of this dimension قياس هذا البعد - + For arc/circle measurements, false = radius, true = diameter لقياسات قوس / دائرة، خطأ = نصف قطرها، صحيح = قطر - + Font size حجم الخط - + The number of decimals to show عدد الكسور العشرية لإظهار - + Arrow size حجم السهم - + The spacing between the text and the dimension line التباعد بين النص وخط البعد - + Arrow type نوع السهم - + Font name اسم الخط - + Line width عرض الخط - + Line color لون الخط - + Length of the extension lines طول خطوط التمديد - + Rotate the dimension arrows 180 degrees أدر سهام الأبعاد 180 درجة - + Rotate the dimension text 180 degrees أدر نص البعد 180 درجة - + Show the unit suffix عرض لاحقة الوحدة - + The position of the text. Leave (0,0,0) for automatic position موقف النص. إترك (0،0،0) لموقف تلقائي - + Text override. Use $dim to insert the dimension length تجاوز النص. استخدم dim$ لإدراج طول البعد - + A unit to express the measurement. Leave blank for system default وحدة للتعبير عن القياس. اتركه فارغا للنظام الافتراضي - + Start angle of the dimension بدء زاوية البعد - + End angle of the dimension زاوية نهاية البعد - + The center point of this dimension النقطة المركزية لهذا البعد - + The normal direction of this dimension الاتجاه الطبيعي لهذا البعد - + Text override. Use 'dim' to insert the dimension length تجاوز النص. استخدام "خافت" لإدراج طول البعد - + Length of the rectangle طول المستطيل - + Radius to use to fillet the corners نصف القطر لاستخدامها فيليه الزوايا - + Size of the chamfer to give to the corners حجم الشطب لإعطاء الزوايا - + Create a face إنشاء وجه - + Defines a texture image (overrides hatch patterns) تعرف على صورة نسيج (تجاوز نقوش التظليل) - + Start angle of the arc بدء زاوية القوس - + End angle of the arc (for a full circle, give it same value as First Angle) زاوية نهاية القوس(للحصول على دائرة كاملة، قم بإعطاء نفس قيمة الزاوية الأولى) - + Radius of the circle نصف قطر الدائرة - + The minor radius of the ellipse دائرة نصف قطرها صغيرة من القطع الناقص - + The major radius of the ellipse نصف قطر دائرة رئيسية من القطع الناقصة - + The vertices of the wire قمم السلك - + If the wire is closed or not إذا تم إغلاق السلك أم لا - + The start point of this line نقطة البداية من هذا الخط - + The end point of this line نقطة نهاية هذا الخط - + The length of this line طول هذا الخط - + Create a face if this object is closed إنشاء وجه إذا تم إغلاق هذا الكائن - + The number of subdivisions of each edge عدد التقسيمات الفرعية لكل حافة - + Number of faces عدد الوجوه - + Radius of the control circle دائرة نصف قطرها دائرة التحكم - + How the polygon must be drawn from the control circle كيفية رسم المضلع من دائرة التحكم - + Projection direction اتجاه الإسقاط - + The width of the lines inside this object عرض الخطوط داخل هذا الكائن - + The size of the texts inside this object حجم النصوص داخل هذا الكائن - + The spacing between lines of text التباعد بين أسطر النص - + The color of the projected objects لون الأجسام المتوقعة - + The linked object الكائن المرتبط - + Shape Fill Style نمط ملء الشكل - + Line Style أسلوب الخط - + If checked, source objects are displayed regardless of being visible in the 3D model إذا تم تحديدها، يتم عرض مصدر الكائنات بغض النظر عن كونها مرئية في نموذج 3D - + Create a face if this spline is closed إنشاء وجه إذا تم إغلاق هذا الخط - + Parameterization factor عامل المعامل - + The points of the Bezier curve نقاط منحنى بيزيه - + The degree of the Bezier function درجة الدالة بيزير - + Continuity استمرارية - + If the Bezier curve should be closed or not إذا كان يجب إغلاق منحنى بيزيه أم لا - + Create a face if this curve is closed إنشاء وجه إذا كان هذا المنحنى مغلق - + The components of this block مكونات هذه الكتلة - + The base object this 2D view must represent الكائن الأساسي يجب أن يمثل هذا العرض 2D - + The projection vector of this object ناقلات الإسقاط لهذا الكائن - + The way the viewed object must be projected طريقة عرض الكائن الذي تم عرضه - + The indices of the faces to be projected in Individual Faces mode مؤشرات الوجوه التي سيتم توقعها في وضع وجوه فردية - + Show hidden lines إظهار الخطوط المخفية - + The base object that must be duplicated الكائن الأساسي الذي يجب أن يكون مكررا - + The type of array to create نوع المجموعة لإنشائها - + The axis direction اتجاه المحور - + Number of copies in X direction عدد النسخ في اتجاه X - + Number of copies in Y direction عدد النسخ في اتجاه Y - + Number of copies in Z direction عدد النسخ في اتجاه Z - + Number of copies تابععدد النسخ - + Distance and orientation of intervals in X direction المسافة والتوجيه من الفواصل في اتجاه X - + Distance and orientation of intervals in Y direction المسافة والتوجه للفواصل في اتجاه Y - + Distance and orientation of intervals in Z direction المسافة والتوجه من فترات في الاتجاه Z - + Distance and orientation of intervals in Axis direction المسافة والتوجه من فترات في اتجاه المحور - + Center point نقطة المركز - + Angle to cover with copies زاوية للتغطية مع النسخ - + Specifies if copies must be fused (slower) يحدد ما إذا كان يجب أن تنصهر النسخ (أبطأ) - + The path object along which to distribute objects كائن المسار الذي يتم توزيع العناصر عليه - + Selected subobjects (edges) of PathObj العناصر الفرعية المحددة (حواف) ل PathObj - + Optional translation vector ناقل ترجمة اختياري - + Orientation of Base along path توجيه القاعدة على طول المسار - + X Location الموقع X - + Y Location الموقع Y - + Z Location الموقع Z - + Text string سلسلة نصية - + Font file name اسم ملف الخط - + Height of text ارتفاع النص - + Inter-character spacing التباعد بين الأحرف - + Linked faces الوجوه المرتبطة - + Specifies if splitter lines must be removed لتحديد ما إذا كان يجب إزالة خطوط المنشق - + An optional extrusion value to be applied to all faces قيمة بثق اختيارية ليتم تطبيقها على جميع الوجوه - + Height of the rectangle ارتفاع المستطيل - + Horizontal subdivisions of this rectangle التقسيمات الأفقية لهذا المستطيل - + Vertical subdivisions of this rectangle التقسيمات العمودية لهذا المستطيل - + The placement of this object موضع هذا الكائن - + The display length of this section plane عرض طول هذا القسم - + The size of the arrows of this section plane حجم أسهم هذا القسم - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects الكائن الأساسي هو السلك، إنه مكون من كائنين - + The tool object is the wire, it's formed from 2 objects كائن الأداة هو السلك، انه مشكل من كائنين - + The length of the straight segment طول الجزء المستقيم - + The point indicated by this label النقطة المشار إليها بواسطة هذا التصنيف - + The points defining the label polyline النقاط التي تحدد التسمية المتعددة - + The direction of the straight segment اتجاه الجزء المستقيم - + The type of information shown by this label نوع المعلومات التي يظهرها هذا التصنيف - + The target object of this label الهدف من هذا التصنيف - + The text to display when type is set to custom النص الذي سيتم عرضه عند تعيين النوع إلى مخصص - + The text displayed by this label النص المعروض بواسطة هذا التصنيف - + The size of the text حجم النص - + The font of the text خط النص - + The size of the arrow حجم السهم - + The vertical alignment of the text المحاذاة الرأسية للنص - + The type of arrow of this label نوع سهم هذا التصنيف - + The type of frame around the text of this object نوع الإطار حول نص هذا الكائن - + Text color لون الخط - + The maximum number of characters on each line of the text box الحد الأقصى لعدد الأحرف على كل سطر من مربع النص - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline نقط المنحنى B - + If the B-spline is closed or not إذا كان المنحنى B مغلق أم لا - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible إذا تحقق هذا الأمر، فسيتم إعادة حساب هذا العنصر إذا كان مرئيا فقط - + Base القاعدة - + PointList PointList - + Count عدد - + The objects included in this clone العناصر المدرجة في هذا المستنسخ - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object النص المعروض من طرف هذا العنصر - + Line spacing (relative to font size) تباعد الخطوط (بالنسبة لحجم الخط) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope ميل - + Scale السلم - + Writing camera position كتابة موضع الكاميرا - + Writing objects shown/hidden state كتابة الأشياء في حالة معروضة / مخفية - + X factor عامل X - + Y factor عامل Y - + Z factor عامل Z - + Uniform scaling الزي الموحد - + Working plane orientation اتجاه سطح العمل @@ -781,20 +816,25 @@ from menu Tools -> Addon Manager من خلال قائمة الأدوات -> مدير الإضافات - + This Wire is already flat This Wire is already flat - + Pick from/to points اختر من/إلى نقاط - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + إنشاء استنساخ + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group الإضافة إلى مجموعة البناء - + Adds the selected objects to the Construction group يقوم بإضافة العناصر المختارة إلى مجموعة البناء @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point إضافة نقطة - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... نقل إلى المجموعة... - + Moves the selected object(s) to an existing group لنقل الكائن المحدد إلى مجموعة حالية @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style تطبيق النمط الحالي - + Applies current line width and color to selected objects يطبق عرض السطر الحالي واللون على الكائنات المحددة @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc قوس - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array مصفوفة - + Creates a polar or rectangular array from a selected object لإنشاء مصفوفة قطبية أو مستطيلة من كائن محدد @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to حدد مجموعة لإضافة جميع كائنات المسودة و وكائن القوس ايضا @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle دائرة - + Creates a circle. CTRL to snap, ALT to select tangent objects Creates a circle. CTRL to snap, ALT to select tangent objects @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone استنساخ - + Clones the selected object(s) استنساخ الكائن المحدد @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line إغلاق الخط - + Closes the line being drawn لإغلاق الخط الجاري رسمه @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point إزالة نقطة - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension البعد - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade تخفيض الرتبة - + Explodes the selected objects into simpler objects, or subtracts faces يفرق الكائنات المحددة إلى كائنات أبسط، أو يطرح الوجوه @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draft to Sketch - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing الرسم - + Puts the selected objects on a Drawing sheet يقوم بوضع العناصر المختارة على ورقة الرسم @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit تعديل - + Edits the active object تحرير الكائن النشط @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse بيضوي - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder موثق الوجه - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line خط النهاية - + Finishes a line without closing it ينهي الخط دون إغلاقه @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension انقلاب البعد - + Flip the normal direction of a dimension انقلاب الاتجاه العادي للبعد @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label عنوان - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line خط - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Creates a 2-point line. CTRL to snap, SHIFT to constrain @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror مرآة - + Mirrors the selected objects along a line defined by two points يعكس الكائنات المحددة على طول خط محدد بنقطتين @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move نقل - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset إزاحة - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy يقوم بتعطيل العنصر النشط. CTRL لالتقاط، SHIF لتقييد، ALT لنسخ @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray مسار المصفوفة - + Creates copies of a selected object along a selected path. إنشاء نسخ من كائن محدد على طول مسار محدد. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point نقطة - + Creates a point object ينشئ نقطة كائن @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon المضلع - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Creates a regular polygon. CTRL to snap, SHIFT to constrain @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle مستطيل - + Creates a 2-point rectangle. CTRL to snap Creates a 2-point rectangle. CTRL to snap @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate تدوير - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale السلم - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group اختر مجموعة - + Selects all objects with the same parents as this group لتحديد كافة الكائنات مع نفس الوالدين مثل هذه المجموعة @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane SelectPlane - + Select a working plane for geometry creation Select a working plane for geometry creation @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view عرض ثنائي الأبعاد للشكل - + Creates Shape 2D views of selected objects Creates Shape 2D views of selected objects @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... شكل من النص... - + Creates text string in shapes. لإنشاء سلسلة نصية بأشكال. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar عرض شريط الكبس - + Shows Draft snap toolbar يعرض شريط أدوات مسودة الكبس @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles زوايا - + Snaps to 45 and 90 degrees points on arcs and circles يستقر إلى 45 و 90 درجة على الأقواس والدوائر @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center مركز - + Snaps to center of circles and arcs يستقر إلى مركز الدوائر والأقواس @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions الأبعاد - + Shows temporary dimensions when snapping to Arch objects لعرض الأبعاد المؤقتة عند الالتقاط لكائنات أرش @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint نقطة النهاية - + Snaps to endpoints of edges يستقر إلى نهاية نقاط الحواف @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension تمديد - + Snaps to extension of edges يكبس لتمديد الحواف @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid شبكة - + Snaps to grid points يستقر على نقاط الشبكة @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection تداخل - + Snaps to edges intersections يستقر لحواف التقاطعات @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off تبديل تشغيل / إيقاف - + Activates/deactivates all snap tools at once تشغيل/إلغاء تنشيط جميع الأدوات الإضافية في آن واحد - + Lock قفل @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint نقطة الوسط - + Snaps to midpoints of edges يكبس إلى نقاط الوسط من الحواف @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest الأقرب - + Snaps to nearest point on edges يكبس إلى أقرب نقطة على الحواف @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions يستقر على إتجاه متعامد و 45 درجة @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel موازى - + Snaps to parallel directions of edges يستقر على الاتجاهات المتوازية من الحواف @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular عمودي - + Snaps to perpendicular points on edges يستقر على نقط عمودية على الحواف @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects يستقر إلى مواقع خاصة من الكائنات @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane سطح العمل - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects يمد الكائنات المحددة @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text نص - + Creates an annotation. CTRL to snap لإنشاء تعليق توضيحي. CTRL لالتقاط @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. تبديل وضع الإنشاء للكائنات التالية. - + Toggle Construction Mode تبديل وضع البناء @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode تبديل وضع المتابعة - + Toggles the Continue Mode for next commands. تبديل وضع المتابعة للأوامر التالية. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode تبديل وضع العرض - + Swaps display mode of selected objects between wireframe and flatlines مبادلة عرض وضع الكائنات المحددة بين الإطار السطحي و الخطوط المسطحة @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid تبديل الشبكة - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid شبكة - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment التراجع عن الجزء الأخير - + Undoes the last drawn segment of the line being drawn يقوم بإلغاء آخر شريحة مرسومة من الخط الذي تم رسمه @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade ترقية - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings إعدادات المسودة العامة - + This is the default color for objects being drawn while in construction mode. هذا هو اللون الافتراضي للكائنات التي يجري رسمها بينما يتم وضع البناء. - + This is the default group name for construction geometry هذا هو اسم المجموعة الافتراضي لهندسة البناء - + Construction اعمال بناء @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainحفظ اللون الحالي وعرض الخط عبر الجلسات - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode إذا كان هذا الخيار محددا، فسيتم الاحتفاظ بوضع النسخ عبر الأوامر، وإلا فستبدأ الأوامر دائمًا في وضع ’عدم النسخ‘ - + Global copy mode وضع النسخ العام - + Default working plane سطح العمل الافتراضي - + None لا يوجد - + XY (Top) XY (أعلى) - + XZ (Front) XZ (من الأمام) - + YZ (Side) YZ (جانب) @@ -1986,12 +2021,12 @@ such as "Arial:Bold" الإعدادات العامة - + Construction group name اسم مجموعة الإنشاء - + Tolerance Tolerance @@ -2016,22 +2051,22 @@ such as "Arial:Bold" يمكنك هنا تحديد المسار الذي يحتوي على ملفات الـ SVG والتي بدورها تحوي تعاريف الـ <pattern> والتي يمكن إضافتها إلى الأنماط المظللة للمسودات القياسية - + Draft interface mode وضع واجهة المسودة - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction هذا هو وضع واجهة المستخدم الذي ستستخدم فيه وحدة المسودة: سوف يقوم وضع شريط الأدوات 'Toolbar mode' بوضع جميع إعدادات المسودة في شريط مستقل للأدوات، في حين أن وضع شريط المهام سوف يستعمل نظام FreeCAD لعرض المهام لكل التفاعلات مع المستخدم - + Toolbar شريط الأدوات - + Taskview عارض المهام @@ -2061,12 +2096,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. عادةً، بعد نسخ العناصر، يتم إختيار النسخ. وإذا تم تحديد هذا الخيار، فسيتم إختيار العناصر القاعدية بدلا عن النسخ. - + Select base objects after copying حدد الكائنات الأساسية بعد النسخ @@ -2101,7 +2136,7 @@ such as "Arial:Bold" Mainlines will be drawn thicker. Specify here how many squares between mainlines. - + Internal precision level مستوى الدقة الداخلية @@ -2218,12 +2253,12 @@ such as "Arial:Bold" ترجمة لون الخط الأبيض إلى الأسود - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. عند تحديد هذا، ستقوم أدوات المسودة بإنشاء أولويات الجزء بدلا من مسودة الكائنات ، عند توفرها. - + Use Part Primitives when available استخدام الاجزاء الاولى عند توفرها @@ -2243,12 +2278,7 @@ such as "Arial:Bold" التقط دائماً (تعطيل وضع الالتقاط) - - Construction geometry - هندسة البناء - - - + Construction geometry color لون هندسة البناء @@ -2388,7 +2418,7 @@ such as "Arial:Bold" حدد ملف الخط - + Fill objects with faces whenever possible ملء الأشياء مع وجوه كلما كان ذلك ممكنا @@ -2680,7 +2710,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2720,7 +2750,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: هذا هو الأسلوب المختار لاستيراد لون الكائن SVG في فريكاد. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe إذا تم تحديد هذا، فستظهر الكائنات كما تم ملؤها بشكل افتراضي. وإلا، فإنها تظهر كإطار سلكي @@ -2801,17 +2831,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: وسيسمح بتحويل العرض بشكل أسرع، لكن هذا سيقلل من سهولة التعديل عليهم - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2891,12 +2911,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2907,695 +2927,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + إغلاق + + + + O + O + + + + Copy + نسخ + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + الخروج + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + الطول + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - أدوات إنشاء المسودّة - - - - Draft modification tools - أدوات تعديل المسودّة - - - - Utilities - خدمات - - - - Wire tools - Wire tools - - - - Snapping - Snapping - draft - + not shape found لم يتم العثور على الشكل - + All Shapes must be co-planar يجب أن تكون جميع الأشكال مقطعية - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object يتعذر تخمين الاتجاه الطبيعي لهذا الكائن - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color لون الخط الحالي - + Current face color لون الوجه الحالي - + Current line width عرض الخط الحالي - + Current font size حجم الخط الحالي - + Apply to selected objects تطبيق على الكائنات المحددة - + Autogroup off إيقاف المجموعة التلقائية - + active command: الأمر النشط: - + None لا يوجد - + Active Draft command Active Draft command - + X coordinate of next point X تنسيق النقطة التالية - + X X - + Y Y - + Z Z - + Y coordinate of next point Y تنسيق النقطة التالية - + Z coordinate of next point Z تنسيق النقطة التالية - + Enter point أدخل نقطة - + Enter a new point with the given coordinates أدخل نقطة جديدة مع إحداثيات معينة - + Length الطول - + Angle الزاوية - + Length of current segment طول القطاع الحالي - + Angle of current segment زاوية الجزء الحالي - + Radius نصف القطر - + Radius of Circle نصف قطر الدائرة - + If checked, command will not finish until you press the command button again إذا تم تحديده، لن ينتهي الأمر حتى تضغط على زر الأمر مرة أخرى - + If checked, an OCC-style offset will be performed instead of the classic offset إذا تم تحديده، فسيتم إجراء إزاحة على نمط OCC بدلا من الإزاحة الكلاسيكية - + &OCC-style offset & نمط الإزاحة OCC - + Add points to the current object إضافة نقاط إلى الكائن الحالي - + Remove points from the current object إزالة نقاط من الكائن الحالي - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides الجانبين - + Number of sides عدد من الجانبين - + Offset إزاحة - + XY (top) XY (أعلى) - - Select XY plane - حدد سطح XY - - - + XZ (front) XZ (الواجهة) - - Select XZ plane - حدد سطح XZ - - - + YZ (side) YZ (الجانب) - - Select YZ plane - حدد سطح YZ - - - + View عرض - - Select plane perpendicular to the current view - Select plane perpendicular to the current view - - - + Auto تلقائي - - Do not project points to a drawing plane - لا تقم بإسقاط النقط على سطح الرسم - - - + Text string to draw السلسلة النصية التي سيتم رسمها - + String سلسلة - + Height of text ارتفاع النص - + Height الارتفاع - + Intercharacter spacing Intercharacter spacing - + Tracking تباعد الحروف - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing تباعد الشبكة - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Select Plane - - - + Line خط - + DWire DWire - + Circle دائرة - + Center X Center X - + Arc قوس - + Point نقطة - + Label عنوان - + Distance Distance - + Trim Trim - + Pick Object Pick Object - + Edit تعديل - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. قيمة الحجم غير صالحة. إستعمال 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. المرجو إدخال سلسلة نصية. - + Select a Font file قم بإختيار ملف الخط - + Please enter a font file. المرجو ادخال ملف خط. - + Autogroup: Autogroup: - + Faces وجوه - + Remove إزالة - + Add إضافة - + Facebinder elements Facebinder elements - + Create Line إنشاء خط - - Pick next point: - - Pick next point: - - - - + Convert to Wire Convert to Wire - + BSpline منحنى B - + BezCurve BezCurve - + Create BezCurve Create BezCurve - + Rectangle مستطيل - + Create Plane إنشاء سطح - + Create Rectangle إنشاء مستطيل - + Create Circle إنشاء دائرة - + Create Arc إنشاء القوس - + Start Angle زاوية البدأ - + Aperture فتحة - + Polygon المضلع - + Create Polygon إنشاء مضلع - + Ellipse بيضوي - + Create Ellipse إنشاء شكل بيضوي - + Text نص - + Create Text إنشاء نص - + Dimension البعد - + Create Dimension إنشاء البعد - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy نسخ - + Move نقل - + Change Style تغيير نمط - + Rotate تدوير - - Cannot offset this object type - - لا يمكن إزاحة هذا النوع من الكائنات - - - - + Stretch Stretch - + Upgrade ترقية - + Downgrade تخفيض الرتبة - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch التحويل إلى رسمة - + Convert to Draft تحويل إلى مُسْودَّة - + Convert تحويل - + Array مصفوفة - + Create Point إنشاء نقطة - + Mirror مرآة - + &Draft &مسودة @@ -3619,179 +3785,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given لم يتم إعطاء أي عنصر - + The two points are coincident النقطتان متطابقتان - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close إغلاق @@ -3836,7 +4002,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge قم بإختيار حافة @@ -3851,7 +4017,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3866,454 +4032,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle قم بهذا الإختيار لقفل الزاوية الحالية - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish إنهاء - + Finishes the current drawing or editing operation يقوم بإنهاء عملية الرسم أو التعديل الحالية - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line يقوم بإنهاء وإغلاق الخط الحالي - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - الخيارات - - - + Default الافتراضي - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - النقطة الأولى: - - - - Closing - جاري الإغلاق - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - النقطة التالية: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed تم إغلاق المنحنى - + Last point has been removed تم حذف النقطة الأخيرة - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline إنشاء منحنى B - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points نقط التقاطع جد كثيرة - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - هذا النوع من العناصر غير قابل للتعديل - - - + Please select only one object المرجو اختيار عنصر واحد فقط - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes يجب أن يتوفر العنصر النشط على أكثر من نقطتين/عقدتين - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone قم بإختيار عنصر لإستنساخه - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4323,56 +4314,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale السلم - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + أعلى + + + + Front + أمام + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + تلقائي + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + الدوران + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + مسودة + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + خدمات + + + + Wire tools + Wire tools + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 814e671b84..ecd08c7bc4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index 1b5401a6cf..4ad350995a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -4,771 +4,806 @@ App::Property - + Defines a hatch pattern Defineix un patró de Ratllat - + Sets the size of the pattern Defineix la mida del patró - + Startpoint of dimension Punt d'inici de dimensió - + Endpoint of dimension Final de la dimensió - + Point through which the dimension line passes Punt per on passa la línia de dimensió - + The object measured by this dimension L'objecte mesurat per aquesta dimensió - + The geometry this dimension is linked to La geometria d'aquesta dimensió es relaciona - + The measurement of this dimension La mesura d'aquesta dimensió - + For arc/circle measurements, false = radius, true = diameter Càlculs de l'arc/cercle, fals = radi, veritable = diàmetre - + Font size Mida del tipus de lletra - + The number of decimals to show El nombre de decimals per mostrar - + Arrow size Mida de la fletxa - + The spacing between the text and the dimension line L'espaiat entre el text i la línia de dimensió - + Arrow type Tipus de fletxa - + Font name Nom de la font - + Line width Amplada de línia - + Line color Color de línia - + Length of the extension lines Longitud de les línies d'extensió - + Rotate the dimension arrows 180 degrees Girar les fletxes de dimensió 180 graus - + Rotate the dimension text 180 degrees Rotar el text dimensió 180 graus - + Show the unit suffix Mostra el sufix de la unitat - + The position of the text. Leave (0,0,0) for automatic position La posició del text. Deixeu (0,0,0) per a la posició automàtica al centre - + Text override. Use $dim to insert the dimension length Invalidació del text. Utilitzar $dim per inserir la longitud de la dimensió - + A unit to express the measurement. Leave blank for system default Em Entra Una unitat d'expressar la mesura. Deixar en blanc per defecte del sistema - + Start angle of the dimension Angle de la dimensió inici - + End angle of the dimension Angle final de la dimensió - + The center point of this dimension El punt central d'aquesta dimensió - + The normal direction of this dimension La direcció normal d'aquesta dimensió - + Text override. Use 'dim' to insert the dimension length Invalidació del text. Utilitzar 'esmorteirà' inserir la longitud de la dimensió - + Length of the rectangle Longitud del rectangle - + Radius to use to fillet the corners Radi utilitzar filetejar els racons - + Size of the chamfer to give to the corners Mida de la habilitació del xamfrà per donar a les cantonades - + Create a face Crear una cara - + Defines a texture image (overrides hatch patterns) Defineix una imatge de textura (omet escotilla patrons) - + Start angle of the arc Angle de començament de l'arc - + End angle of the arc (for a full circle, give it same value as First Angle) Angle final de l'arc (per a un cercle complet, donar-lo mateix valor com primer Angle) - + Radius of the circle Radi de la circumferència - + The minor radius of the ellipse El radi menor de l'el·lipse - + The major radius of the ellipse El radi major de l'el·lipse - + The vertices of the wire Els vèrtexs de fil - + If the wire is closed or not Si el fil (malla) està tancat o no - + The start point of this line El punt de partida d'aquesta línia - + The end point of this line El punt final d'aquesta línia - + The length of this line La longitud d'aquesta línia - + Create a face if this object is closed Crear una cara si aquest objecte s'està tancat - + The number of subdivisions of each edge El nombre de subdivisions de cada tall - + Number of faces Nombre de cares - + Radius of the control circle Radi de la circumferència de control - + How the polygon must be drawn from the control circle Com el polígon ha de ser extret del cercle de control - + Projection direction Direcció de projecció - + The width of the lines inside this object L'amplada de les línies dins d'aquest objecte - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + The spacing between lines of text L'espaiat entre línies de text - + The color of the projected objects El color dels objectes projectats - + The linked object L'objecte enllaçat - + Shape Fill Style Estil d'emplenament de forma - + Line Style Estil de línia - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D - + Create a face if this spline is closed Crear una cara si aquest objecte s'està tancat - + Parameterization factor Factor de parametrització - + The points of the Bezier curve Els punt de la curva de bezier - + The degree of the Bezier function Els graus de la funció bezier - + Continuity Continuitat - + If the Bezier curve should be closed or not Cuant la curva bezier es deu de tancar o no - + Create a face if this curve is closed Crear una cara si aquest objecte s'està tancat - + The components of this block Els components d'aquest bloc - + The base object this 2D view must represent Objecta 2D per representar - + The projection vector of this object Projecció vectorial del objecta - + The way the viewed object must be projected El camí que s ha projectat l'objecte vist - + The indices of the faces to be projected in Individual Faces mode Els índexs de les cares i serà projectada en el mode Individual cares - + Show hidden lines Mostra les línies amagades - + The base object that must be duplicated L'objecte de base que s'ha duplicat - + The type of array to create El tipus de matriu per crear - + The axis direction La direcció de l'eix - + Number of copies in X direction Nombre de còpies en X direcció - + Number of copies in Y direction Nombre de còpies en direcció Y - + Number of copies in Z direction Nombre de còpies en direcció Z - + Number of copies Nombre de còpies - + Distance and orientation of intervals in X direction Distància i orientació d'intervals en direcció X - + Distance and orientation of intervals in Y direction Distància i orientació d'intervals en direcció Y - + Distance and orientation of intervals in Z direction Distància i orientació d'intervals en direcció Z - + Distance and orientation of intervals in Axis direction Distància i orientació d'intervals en la direcció de l'eix - + Center point Punt central - + Angle to cover with copies Angle per cobrir amb còpies - + Specifies if copies must be fused (slower) Especifica si còpies s'han fusionat (més lent) - + The path object along which to distribute objects L'objecte de camí al llarg per a distribuir objectes - + Selected subobjects (edges) of PathObj Seleccionats subobjects (vores) de PathObj - + Optional translation vector Vector opcional de traducció - + Orientation of Base along path Orientació de Base pel camí - + X Location Ubicació X - + Y Location Localització Y - + Z Location Localització de Z - + Text string Cadena de text - + Font file name Nom de fitxer de tipus de lletra - + Height of text Alçada del text - + Inter-character spacing Espaiat de Inter-caràcter - + Linked faces Enllaçat de cares - + Specifies if splitter lines must be removed Especifica si cal suprimir línies divisor - + An optional extrusion value to be applied to all faces Un valor opcional d'extrusió per aplicar a totes les cares - + Height of the rectangle Alçada del rectangle - + Horizontal subdivisions of this rectangle Subdivisió horitzontal d'aquest rectangle - + Vertical subdivisions of this rectangle Subdivisió vertical del rectangle - + The placement of this object La posició d'aquest objecte - + The display length of this section plane La longigud que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Deixa les cares en el lloc del tall pels modes «Cutlines» i «Cutfaces» - + The base object is the wire, it's formed from 2 objects L'objecte base és el filferro, està format de 2 objectes - + The tool object is the wire, it's formed from 2 objects L'objecte eina és el filferro, està format de 2 objectes - + The length of the straight segment La longitud del segment recte - + The point indicated by this label El punt indicat per aquesta etiqueta - + The points defining the label polyline Els punts que defineixen l'etiqueta de la línia de polígons - + The direction of the straight segment La direcció del segment recte - + The type of information shown by this label El tipus d'informació mostrat per aquesta etiqueta - + The target object of this label L'objecte objectiu d'aquesta etiqueta - + The text to display when type is set to custom El text que es mostrarà quan aquest tipus estigui definit a personalitzat - + The text displayed by this label El text mostrat per aquesta etiqueta - + The size of the text La mida del text - + The font of the text El tipus de lletra del text - + The size of the arrow La mida de la fletxa - + The vertical alignment of the text L'alineament vertical del text - + The type of arrow of this label El tipus de fletxa d'aquesta etiqueta - + The type of frame around the text of this object El tipus de marc al voltant del text d'aquest objecte - + Text color Color del text - + The maximum number of characters on each line of the text box El màxim nombre de caràcters en cada línia de la caixa de text - + The distance the dimension line is extended past the extension lines La distància en que la línia de cota s'exten mes enlláde les línies d'extensió - + Length of the extension line above the dimension line Distància de la línia d'extensió per sobre de la línia de cota - + The points of the B-spline Els punts de la B-spline - + If the B-spline is closed or not Si la B-spline està tancada o no - + Tessellate Ellipses and B-splines into line segments Tessel·la El·lipsis i B-splines en segments de línia - + Length of line segments if tessellating Ellipses or B-splines into line segments Longitud de línies si s'està tessel·lat el·lipses o B-Splines en segments de línia - + If this is True, this object will be recomputed only if it is visible Si això és cert, aquest objecte serà recalculat només si és visible - + Base Base - + PointList Llistat de Punts - + Count Comptar - + The objects included in this clone Els objectes inclosos en aquest clon - + The scale factor of this clone El factor d'escala d'aquest clon - + If this clones several objects, this specifies if the result is a fusion or a compound Si això clonés diversos objectes, especifica si el resultat és una fusió o una composició - + This specifies if the shapes sew Això Especifica si es Cusen les Formes - + Display a leader line or not Mostrar una línia Guìa o no - + The text displayed by this object El text mostrat amb aquest objecte - + Line spacing (relative to font size) Interlineat (relatiu a la mida de lletra) - + The area of this object - The area of this object + La superficie d'aquest objecte - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Mostra un símbol de dimensiò a l'extrem de la polilinea - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusionar mur i objectes estructurals del maiteix tipus de material + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Pendent - + Scale Escala - + Writing camera position Escrivint la posició de la càmera - + Writing objects shown/hidden state Escrivint objectes en estat mostrat/ocult - + X factor Factor X - + Y factor Factor Y - + Z factor Factor Z - + Uniform scaling Escalat uniforme - + Working plane orientation Orientació del pla de treball @@ -782,20 +817,25 @@ Instal·li el complement de la llibreria dxf mitjançant l'opció Eines ->Gestor de complements - + This Wire is already flat Aquest fil ja esta Pla - + Pick from/to points Triar el/els Punts - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Falta donar als Filferros/linies seleccionats: 0 = horizontal, 1 = 45 graus cap amunt, -1 = 45 graus cap avall + + + Create a clone + Crear un clon + DraftShapeStringGui @@ -847,28 +887,28 @@ mitjançant l'opció Eines ->Gestor de complements Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Entrar coordenades o selecionar un punt amb el ratolì. Reset 3d point selection - Reset 3d point selection + Redefinir selecciò de punts 3d Reset Point - Reset Point + Reiniciar Punt Draft_AddConstruction - + Add to Construction group Afegir al Grup de Construcció - + Adds the selected objects to the Construction group Afegeix els objectes seleccionats a un grup de Construcció existent @@ -876,12 +916,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_AddPoint - + Add Point Afegir punt - + Adds a point to an existing Wire or B-spline Afegeix un punt a un Cable existent o a una B-spline @@ -889,12 +929,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_AddToGroup - + Move to group... Moure al grup... - + Moves the selected object(s) to an existing group Mou els objectes seleccionats a un grup existent @@ -902,12 +942,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_ApplyStyle - + Apply Current Style Aplicar estil actual - + Applies current line width and color to selected objects Aplica el gruix i color de línia actual als objectes seleccionats @@ -915,46 +955,46 @@ mitjançant l'opció Eines ->Gestor de complements Draft_Arc - + Arc Arc - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Crea un arc a partir del punt central i el radi. Ctrl per a ajustar, Maj. per a restringir Draft_ArcTools - + Arc tools - Arc tools + Eines d'arc Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arc de 3 punts - + Creates an arc by 3 points - Creates an arc by 3 points + Crea un arc que passi per tres punts Draft_Array - + Array Matriu, Array - + Creates a polar or rectangular array from a selected object Crea una matriu rectangular o polar d'un objecte seleccionat @@ -962,12 +1002,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_AutoGroup - + AutoGroup Auto-agrupar - + Select a group to automatically add all Draft & Arch objects to Seleccioneu un grup per afegir-los automàticament a tots els Draft & Archc @@ -975,12 +1015,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Crea una B-spline de múltiples punts. CTRL per ajustar, SHIFT per a restricció @@ -988,12 +1028,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_BezCurve - + BezCurve Corba de Bézier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Crea una corba Bezier. CTRL per forçar, SHIFT per a restringir @@ -1001,20 +1041,20 @@ mitjançant l'opció Eines ->Gestor de complements Draft_BezierTools - + Bezier tools - Bezier tools + Eines Bézier Draft_Circle - + Circle Cercle - + Creates a circle. CTRL to snap, ALT to select tangent objects Crea un cercle. CTRL per forçar, ALT per seleccionar objectes tangents @@ -1022,12 +1062,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_Clone - + Clone Clona - + Clones the selected object(s) Clona els objectes seleccionats @@ -1035,12 +1075,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_CloseLine - + Close Line Tanca la línia - + Closes the line being drawn Tanca la línia que s'està dibuixant @@ -1048,27 +1088,27 @@ mitjançant l'opció Eines ->Gestor de complements Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + CorbaBézierCúbica - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Crea una corba Bézier cúbica +Feu clic i arrossegueu per a definir punts de control. Ctrl per a ajustar, Maj. per a restringir Draft_DelPoint - + Remove Point Eliminar punt - + Removes a point from an existing Wire or B-spline Elimina un punt d'un Cable o B-spline existent @@ -1076,12 +1116,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensió - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crea una acotació. CTRL per forçar, SHIFT per restringir, ALT per seleccionar un segment @@ -1089,12 +1129,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Baixar de categoria - + Explodes the selected objects into simpler objects, or subtracts faces Explota els objectes seleccionats en objectes més simples, o la resta de cares @@ -1102,12 +1142,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Borrador a esquema - + Convert bidirectionally between Draft and Sketch objects Convertir bidireccionalment entre objectes dibuix i esboç @@ -1115,12 +1155,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Dibuixant - + Puts the selected objects on a Drawing sheet Posa els objectes seleccionats en un Full de Dibuix @@ -1128,12 +1168,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Edita - + Edits the active object Edita l'objecte actiu @@ -1141,30 +1181,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Edició millorada - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Editar els objectes seleccionats Draft_Ellipse - + Ellipse El·lipse - + Creates an ellipse. CTRL to snap Crea una el·lipse. CTRL per ajustar @@ -1172,12 +1207,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Unir cares - + Creates a facebinder object from selected face(s) Crear un objecte facebinder a partir de cara(s) seleccionada(s) @@ -1185,12 +1220,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Acabar Línia - + Finishes a line without closing it Acaba una línia sense tancar-lo @@ -1198,12 +1233,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Invertir Cota - + Flip the normal direction of a dimension Capgirar la direcció normal d'una cota @@ -1211,12 +1246,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Reparar - + Heal faulty Draft objects saved from an earlier FreeCAD version Arreglar objectes dolents, salvats d'una versió anterior FreeCAD @@ -1224,38 +1259,51 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join - Join + Unió - + Joins two wires together - Joins two wires together + Uneix dos filferros Draft_Label - + Label Etiqueta - + Creates a label, optionally attached to a selected object or element Crea una etiqueta, opcionalment lligada al objecte o element seleccionat + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Línia - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crea una línia de 2 punts. CTRL per forçar, SHIFT per restringir @@ -1263,12 +1311,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Mirall - + Mirrors the selected objects along a line defined by two points Reflecteix els objectes seleccionats seguint una línia definida per dos punts @@ -1276,25 +1324,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mou - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Mou els objectes seleccionats entre 2 punts. Ctrl per a ajustar, Maj. per a restringir Draft_Offset - + Offset Equidistancia (ofset) - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Crea una equidistància al objecta actiu CTRL para forçar, SHIFT per restringir, ALT per copiar @@ -1302,12 +1350,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Crea copies d' un objecte seleccionat seguin una ruta seleccionada. @@ -1315,12 +1363,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punt - + Creates a point object Crea un objecte punt @@ -1328,12 +1376,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Array/Matriu de Punts - + Creates copies of a selected object on the position of points. Crea còpies d’un objecte seleccionat a la posició dels punts. @@ -1341,12 +1389,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polígon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crea un polígon regular. CTRL per forçar, SHIFT per restringir @@ -1354,12 +1402,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rectangle - + Creates a 2-point rectangle. CTRL to snap Crea un rectangle donat per 2 punts. CTRL para forçar @@ -1367,12 +1415,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rotació - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Gira els objectes seleccionats. CTRL per forçar, SHIFT a limitar, ALT crea una còpia @@ -1380,12 +1428,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Escala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Escala els objectes seleccionats desde un punt base. CTRL per forçar, SHIFT restringir, ALT copiar @@ -1393,12 +1441,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Selecciona un grup - + Selects all objects with the same parents as this group Selecciona tots els objectes amb els mateixos pares com aquest grup @@ -1406,12 +1454,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Seleccionar plano - + Select a working plane for geometry creation Seleccioneu un pla de treball per a la creació de la geometria @@ -1419,12 +1467,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Crea un objecte partint del pla de treball actual - + Create Working Plane Proxy Crear un Pla de Treball intermediari @@ -1432,12 +1480,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Vista de forma 2D - + Creates Shape 2D views of selected objects Crea vistes 2D forma dels objectes seleccionats @@ -1445,12 +1493,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma a partir de texte... - + Creates text string in shapes. Crear una cadena de texts en les formes. @@ -1458,12 +1506,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Mostra la barra de ajust - + Shows Draft snap toolbar Mostra la barra d'eines de ajust del esborrany @@ -1471,12 +1519,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Definir Pendent - + Sets the slope of a selected Line or Wire Estableix el pendent d'una línia o filferro seleccionat @@ -1484,12 +1532,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Força 45 i 90 graus punts sobre arcs i cercles @@ -1497,12 +1545,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centre - + Snaps to center of circles and arcs FORÇA al centre de cercles i arcs @@ -1510,12 +1558,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Mostra les dimensions temporals quan ajusta a objectes arcs @@ -1523,12 +1571,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punt final - + Snaps to endpoints of edges FORÇA extrems vores @@ -1536,12 +1584,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensió - + Snaps to extension of edges S' ajusta a la extensió dels bordes @@ -1549,12 +1597,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Quadrícula - + Snaps to grid points S' ajusta als punts de la reixa @@ -1562,12 +1610,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersecció - + Snaps to edges intersections S' ajusta a les interseccions dels bordes @@ -1575,17 +1623,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Tanca On/Off - + Activates/deactivates all snap tools at once Activa/desactiva totes les einesde ajust a la vegada - + Lock Bloquejar @@ -1593,12 +1641,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punt mig - + Snaps to midpoints of edges S' ajusta als punts mitjos dels bordes @@ -1606,12 +1654,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Més propera - + Snaps to nearest point on edges S'ajusta punt més proper a les vores @@ -1619,12 +1667,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orto - + Snaps to orthogonal and 45 degrees directions S' ajusta a direccions ortogonals i a 45 graus @@ -1632,12 +1680,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paral·lel - + Snaps to parallel directions of edges S' anexa a direccions paral. leles dels bordes @@ -1645,12 +1693,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Sejustan perpendiculars punts en les vores @@ -1658,12 +1706,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special - Special + Especial - + Snaps to special locations of objects Caça ubicacions especials d'objectes @@ -1671,12 +1719,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Pla de treball - + Restricts the snapped point to the current working plane Restringeix el punt de caça del pla de treball actual @@ -1684,25 +1732,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Dividir - + Splits a wire into two wires - Splits a wire into two wires + Divideix un filferro en dos filferros Draft_Stretch - + Stretch - Stretch + Estira - + Stretches the selected objects Estirar els objectes seleccionats @@ -1710,12 +1758,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Crea una anotació. CTRL per caçar @@ -1723,12 +1771,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Commuta el Mode de construcció per a objectes propers. - + Toggle Construction Mode Commuta el Mode construcció @@ -1736,12 +1784,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Tanca continuar Mode - + Toggles the Continue Mode for next commands. Commuta el Mode de continuar per les següents ordres. @@ -1749,12 +1797,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Commuta el mode de visualització - + Swaps display mode of selected objects between wireframe and flatlines Intercanvia la forma de mostrar els objectes seleccionats entre models de malla i línies planes @@ -1762,22 +1810,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Tanca de malla - + Toggles the Draft grid on/off Commuta la quadrícula esborrany encès/apagat - + Grid Quadrícula - + Toggles the Draft grid On/Off Commuta la quadrícula d'Esborrany Activa/Inactiva @@ -1785,12 +1833,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Retalla o s'estén l'objecte seleccionat o extrudeix sol cares. SHIFT CTRLcaça, limita al segment actual o normal, ALT inverteix @@ -1798,12 +1846,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Desfer l'últim segment - + Undoes the last drawn segment of the line being drawn Desfà l'últim segment dibuixat de la línia es dibuixen @@ -1811,51 +1859,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Actualització - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Junta els objectes seleccionats en un de sol, o converteix els contorns tancats a cares, o uneix cares - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Agrega un VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crea un DraftWire (DWire) de punts múltiples. CTRL per ajust, Majús para restricció + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Filferro a B-splines - + Converts between Wire and B-spline Converteix entre Filferro i B-spline @@ -1863,22 +1898,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Configuracions Generals de Projecte - + This is the default color for objects being drawn while in construction mode. Aquest es el color predeterminat per objectes que estan sent dibuixats en el mode de construcció. - + This is the default group name for construction geometry Aquest es el nom del grup predeterminat per la geometria de la construcció - + Construction Construcció @@ -1888,37 +1923,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainGuardar color actual i linewidth a través de les sessions - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Si està marcada, es mantindrà a través de comanda de mode de còpia, en cas contrari comandes sempre s'iniciarà en el mode de no-còpia - + Global copy mode Mode de còpia global - + Default working plane Pla de treball per defecte - + None Cap - + XY (Top) XY (dalt) - + XZ (Front) XZ (Front.) - + YZ (Side) YZ (costat) @@ -1986,12 +2021,12 @@ such as "Arial:Bold" Configuració general - + Construction group name Nom del grup de construcció - + Tolerance Tolerància @@ -2016,22 +2051,22 @@ such as "Arial:Bold" Ací podeu especificar un directori que conté arxius SVG que contenen definicions de <pattern>que es poden afegir a les pautes d'escotilla de projecte estàndards - + Draft interface mode Mode d'interfície d'esborrany - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Aquest és el mode d'interfície d'usuari en què treballarà el mòdul de projecte: mode de Toolbar posarà totes les escenes d'esborrany en un toolbar separada, mentre mode de taskbar utilitzarà el sistema FreeCAD Taskview per a tots els seu interacció d'usuari - + Toolbar Barra d'eines - + Taskview Visor @@ -2061,12 +2096,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalment, després de copiar objectes, aconseguir seleccionar les còpies. Si aquesta opció està marcada, els objectes base seran seleccionats en canvi. - + Select base objects after copying Permet seleccionar objectes base després de copiar @@ -2101,7 +2136,7 @@ such as "Arial:Bold" Mainlines s'extrauran més gruixuda. Especifiqueu aquí quantes places entre mainlines. - + Internal precision level Nivell de precisió interna @@ -2216,12 +2251,12 @@ such as "Arial:Bold" Traduir el color de línia de blanc a negre - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Quan està marcada, les eines d'esborrany crearà Part primitives en comptes d'objectes de projecte, quan estigui disponible. - + Use Part Primitives when available Utilitzar Part Primitives quan estigui disponible @@ -2241,12 +2276,7 @@ such as "Arial:Bold" Sempre (Impossibiliti Snap mod) - - Construction geometry - Geometria de la construcció - - - + Construction geometry color Color de geometria de construcció @@ -2386,7 +2416,7 @@ such as "Arial:Bold" Seleccioneu un fitxer de tipus de lletra - + Fill objects with faces whenever possible Omplir els objectes amb cares sempre que sigui possible @@ -2676,7 +2706,7 @@ such as "Arial:Bold" Actualització automàtica (llegat importador només) - + Prefix labels of Clones with: Etiquetes dels clons del prefix: @@ -2713,7 +2743,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Aquest és el mètode escollit per importar color objecte SVG cap a FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Si està marcada, els objectes apareixeran com plens com omissió. En cas contrari, apareixen com a malla @@ -2793,44 +2823,34 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Si està marcada, els objectes de les mateixes capes s'uniran en Blocs d'Esborrany, La visualització serà més ràpida, però l'edició serà més difícil - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Si està marcada, es mostrarà instruccions pas a pas a la finestra de sortida quan s'executin ordres d'esborrany - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate Quan es dibuixen línies, posar focus en la Longitud en comptes de la coordenada X Extension lines size - Extension lines size + Tamany de les linies d’extensiò Extension line overshoot - Extension line overshoot + Superació de la línia d'extensió The default length of extension line above dimension line - The default length of extension line above dimension line + La llargària per defecte de l'extensió de la línia per sobre de la línia de dimensió Dimension line overshoot - Dimension line overshoot + Superació de la línia de dimensió The default distance the dimension line is extended past extension lines - The default distance the dimension line is extended past extension lines + La distància per defecte de la línia de dimensió s'estén més enllà de les línies d'extensió @@ -2840,42 +2860,42 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Tick-2 - Tick-2 + Tick-2 Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) - Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) + Marcar si voleu preservar el color de les cares mentre s'estigui revertint o actualitzant (sols splitFaces i makeShell) Preserve colors of faces during downgrade/upgrade - Preserve colors of faces during downgrade/upgrade + Preserva el color de les cares durant la downgrade/upgrade Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) - Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) + Marqueu això si voleu que els noms de les cares derivin del nom de l'objecte d'origen i viceversa quan s'estigui revertint o actualitzant (sols splitFaces i makeShell) Preserve names of faces during downgrade/upgrade - Preserve names of faces during downgrade/upgrade + Preserva el nom de les cares durant la reversió i l'actualització Path to ODA (formerly Teigha) File Converter - Path to ODA (formerly Teigha) File Converter + Camí al convertidor de fitxers ODA (anteriorment Teigha) The path to your ODA (formerly Teigha) File Converter executable - The path to your ODA (formerly Teigha) File Converter executable + El camí a l'executable del convertidor de fitxers ODA ( anteriorment Teigha) Ellipse export is poorly supported. Use this to export them as polylines instead. - Ellipse export is poorly supported. Use this to export them as polylines instead. + Exportació d'el·lipses poc compatible. En el seu lloc, utilitzeu això per a exportar-les com a polilínies. @@ -2883,709 +2903,856 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Segment de Spline Màxim: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + El nombre de decimals en les operacions de coordenades internes (p. ex. 3 = 0,001). Els usuaris de FreeCAD consideren el millor rang els valors entre 6 i 8. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Aquest és el valor utilitzat per a funcions que utilitzen una tolerància. +Els valors amb diferències per sota d'aquest valor es tractaran com a iguals. Aquest valor aviat serà obsolet, així que el nivell de precisió superior controla tots dós. Use legacy python exporter - Use legacy python exporter + Utilitza l'exportador python llegat + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria de construcció + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relatiu + + + + R + R + + + + Continue + Continua + + + + T + T + + + + Close + Tanca + + + + O + O + + + + Copy + Copia + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Surt + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Longitud + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restringeix X + + + + X + X + + + + Restrict Y + Restringeix Y + + + + Y + Y + + + + Restrict Z + Restricciò Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Ajust del borrador - - - Draft creation tools - Eines de creació d'esborrany - - - - Draft modification tools - Projecte modificació eines - - - - Utilities - Utilitats - - - - Wire tools - Eines de filferro - - - - Snapping - Ajusta - draft - + not shape found no s'ha trobat la forma - + All Shapes must be co-planar Totes les formes han de ser co-planars - + The given object is not planar and cannot be converted into a sketch. L'objecte determinat no és pla i no es pot convertir en un esbós. - + Unable to guess the normal direction of this object No es pot endevinar la direcció normal d'aquest objecte - + Draft Command Bar Draft Command Bar - + Toggle construction mode Activar/desactivar el mode de construcció - + Current line color Color de la línia actual - + Current face color Color de la cara actual - + Current line width Amplada de la línia actual - + Current font size Mida de la font de text actual - + Apply to selected objects S'apliquen a objectes seleccionats - + Autogroup off Desactivar Auto-agrupar - + active command: ordre actiu: - + None Cap - + Active Draft command Comandament actiu d'esborrany - + X coordinate of next point X coordenada del punt següent - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y del punt següent - + Z coordinate of next point Coordenada Z del punt següent - + Enter point Entri el punt - + Enter a new point with the given coordinates Subministri un nou punt amb les coordenades donades - + Length Longitud - + Angle Angle - + Length of current segment Longitud del segment actual - + Angle of current segment Angle del segment actual - + Radius Radi - + Radius of Circle Radi del cercle - + If checked, command will not finish until you press the command button again Si està marcada, comanda no acabarà fins que es premi el botó de comanda una altra vegada - + If checked, an OCC-style offset will be performed instead of the classic offset Si està marcada, es realitzarà una compensació OCC estil en lloc de la compensació clàssic - + &OCC-style offset &OCC estil compensar (ofset) - + Add points to the current object Afegir punts a l'objecte actual - + Remove points from the current object Treure punts de l'objecte actual - + Make Bezier node sharp Fer Bezier node agut - + Make Bezier node tangent Fer Bezier tangent de node - + Make Bezier node symmetric Fer Bezier node simètrica - + Sides Costats - + Number of sides Nombre de costats - + Offset Equidistancia (ofset) - + XY (top) XY (superior) - - Select XY plane - Seleccioneu el pla XY - - - + XZ (front) XZ (front) - - Select XZ plane - Seleccioneu el pla XZ - - - + YZ (side) YZ (costat) - - Select YZ plane - Seleccioneu el pla YZ - - - + View Veure - - Select plane perpendicular to the current view - Seleccioneu la perpendicular del pla a la visualització actual - - - + Auto Auto - - Do not project points to a drawing plane - No projectar punts al pla de dibuix - - - + Text string to draw Cadena de text a dibuixar - + String Cadena - + Height of text Alçada del text - + Height Alçària - + Intercharacter spacing Espaiat de Inter-caràcter - + Tracking Seguiment - + Full path to font file: Ruta d'acces completa al arxiu font: - + Open a FileChooser for font file Obrir un selector de fitxers per a arxiu de font - + Grid spacing Espaiat de la quadrícula - + The spacing between the grid lines L'espaiat entre les línies de la graella - + Main line every Línia principal cada - + The number of lines between main lines El nombre de línies entre les línies principals - + Center plane on view Pla central de la vista - - Select Plane - Seleccioneu pla - - - + Line Línia - + DWire DWire - + Circle Cercle - + Center X Centre X - + Arc Arc - + Point Punt - + Label Etiqueta - + Distance Distance - + Trim Retallar - + Pick Object Designar objecte - + Edit Edita - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Valor de mida no vàlid. Utilitzant 200.0. - + Invalid Tracking value. Using 0. Valor de seguiment no és vàlid. Utilitzant 0. - + Please enter a text string. Si us plau, introduïu una cadena de text. - + Select a Font file Seleccioneu un fitxer de tipus de lletra - + Please enter a font file. Si us plau, introduïu un fitxer de tipus de lletra. - + Autogroup: Auto-agrupar: - + Faces Cares - + Remove Elimina - + Add Afig - + Facebinder elements Elements de lligam de cares - + Create Line Crear línia - - Pick next point: - - Trieu el següent punt: - - - + Convert to Wire Convertir a Filferro - + BSpline BSpline - + BezCurve Corba de Bézier - + Create BezCurve Crear corba de Bézier - + Rectangle Rectangle - + Create Plane Crear Pla - + Create Rectangle Crear Rectangle - + Create Circle Crear el cercle - + Create Arc Crear Arc - + Start Angle Angle inicial - + Aperture Obertura - + Polygon Polígon - + Create Polygon Crear Polígon - + Ellipse El·lipse - + Create Ellipse Crear El·lipse - + Text Text - + Create Text Crear Text - + Dimension Dimensió - + Create Dimension Crear la dimensió - + ShapeString Forma d'Etiqueta - + Create ShapeString Crear ShapeString - + Copy Copia - + Move Mou - + Change Style Canvi d'estil - + Rotate Rotació - - Cannot offset this object type - - No es pot compensar aquest tipus d'objecte - - - - + Stretch - Stretch + Estira - + Upgrade Actualització - + Downgrade Baixar de categoria - + Selection is not a Knot La selecció no és un nus - + Convert to Sketch Convertir a Croquis - + Convert to Draft Convertir a Esborrany - + Convert Convertir - + Array Matriu, Array - + Create Point Crear punt - + Mirror Mirall - + &Draft & Esborrany @@ -3608,179 +3775,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Per permetre que FreeCAD descarregui aquestes llibreries respongui Sí. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: no hi ha prou punts - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline: extrems iguals forcen el tancament - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: la llista de punts no és vàlida - + No object given - No object given + Cap objecte donat - + The two points are coincident - The two points are coincident + Els dos punts són coincidents - + Found groups: closing each open object inside - Found groups: closing each open object inside + Grups trobats: tanca dins cada objecte obert - + Found mesh(es): turning into Part shapes - Found mesh(es): turning into Part shapes + Malla(es) trobada(es): converteix formes en peces - + Found 1 solidifiable object: solidifying it - Found 1 solidifiable object: solidifying it + S'ha trobat un objecte solidificable: solidifica'l - + Found 2 objects: fusing them - Found 2 objects: fusing them + Trobats 2 objectes: fusiona'ls - + Found several objects: creating a shell - Found several objects: creating a shell + Trobats diversos objectes: crea una closca - + Found several coplanar objects or faces: creating one face - Found several coplanar objects or faces: creating one face + Trobats diversos objectes o cares coplanaris: Crea una cara - + Found 1 non-parametric objects: draftifying it - Found 1 non-parametric objects: draftifying it + Trobat un objecte no-paramètric: esbossant-lo - + Found 1 closed sketch object: creating a face from it - Found 1 closed sketch object: creating a face from it + Trobat un objecte esbós tancat: Crea una cara amb ell - + Found 1 linear object: converting to line - Found 1 linear object: converting to line + Trobat un objecte lineal: Convertir en una línia - + Found closed wires: creating faces - Found closed wires: creating faces + Trobats filferros tancats: Crea cares - + Found 1 open wire: closing it - Found 1 open wire: closing it + Trobat 1 filferro obert: tanca'l - + Found several open wires: joining them - Found several open wires: joining them + Trobats diversos filferros oberts: uneix-los - + Found several edges: wiring them - Found several edges: wiring them + Trobades diverses arestes: connecta-les - + Found several non-treatable objects: creating compound - Found several non-treatable objects: creating compound + Trobats diversos objectes no tractables: crea una composició - + Unable to upgrade these objects. - Unable to upgrade these objects. + No es poden actualitzar aquests objectes. - + Found 1 block: exploding it - Found 1 block: exploding it + Trobat un bloc: descomposar - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Trobat un compost multi-sòlid: descomposar - + Found 1 parametric object: breaking its dependencies - Found 1 parametric object: breaking its dependencies + Trobat un objecte paramètric: trencar les seves dependències - + Found 2 objects: subtracting them - Found 2 objects: subtracting them + Trobats dos objectes: restals - + Found several faces: splitting them - Found several faces: splitting them + Hem trobat moltes cares: dividir-les - + Found several objects: subtracting them from the first one - Found several objects: subtracting them from the first one + Hem trobat diversos objectes: restar-los del primer - + Found 1 face: extracting its wires - Found 1 face: extracting its wires + Trobat 1 cara: extreure els seus fils - + Found only wires: extracting their edges - Found only wires: extracting their edges + Trobats sols fils: extrau les arestes - + No more downgrade possible - No more downgrade possible + No possible baixar mès - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No s’ha trobat cap punt - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relatiu - + Continue Continua - + Close Tanca @@ -3825,7 +3992,7 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongui Sí.Restricciò Z - + Select edge Select edge @@ -3840,7 +4007,7 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongui Sí.Length mode - + Wipe Wipe @@ -3855,513 +4022,636 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongui Sí.Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Finalitza - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line - Finishes and closes the current line + Finalitza i tanca la línia actual - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Per defecte - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Crea un B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Angle d’obertura: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: + + Select an object to offset + Selecciona un objecte per a compensar - Select an object to offset - Select an object to offset - - - Offset only works on one object at a time - Offset only works on one object at a time + La separació només funciona amb un objecte cada vegada - + Sorry, offset of Bezier curves is currently still not supported - Sorry, offset of Bezier curves is currently still not supported + La separació de les corbes Bezier encara no està disponible - - Pick distance: - Pick distance: - - - + Select an object to stretch - Select an object to stretch + Selecciona un objecte per a estirar - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire - Turning one Rectangle into a Wire + Transforma un rectangle en un filferro - + Select an object to join - Select an object to join + Seleccioneu un objecte per a unir - + Join - Join + Unió - + Select an object to split - Select an object to split + Seleccioneu un objecte per a dividir - + Select an object to upgrade - Select an object to upgrade + Selecciona un objecte per a actualitzar - + Select object(s) to trim/extend - Select object(s) to trim/extend + Selecciona objecte(s) per acurtar/allargar + + + + Unable to trim these objects, only Draft wires and arcs are supported + No es poden retallar aquests objectes, sols són compatibles esborranys de filferros i arcs - Unable to trim these objects, only Draft wires and arcs are supported - Unable to trim these objects, only Draft wires and arcs are supported + Unable to trim these objects, too many wires + No es poden retallar aquests objectes, massa filferros - - Unable to trim these objects, too many wires - Unable to trim these objects, too many wires + + These objects don't intersect + Aquests objectes no s'intersequen - These objects don't intersect - These objects don't intersect - - - Too many intersection points - Too many intersection points + Massa punts d'intersecció - + Select an object to scale - Select an object to scale + Selecciona un objecte per a redimensionar - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project - Select an object to project + Selecciona un objecte per projectar - - This object type is not editable - This object type is not editable - - - + Please select only one object - Please select only one object + Seleccioneu un únic objecte - + Select a Draft object to edit - Select a Draft object to edit + Seleccioneu un objecte esborrany per editar - + Active object must have more than two points/nodes - Active object must have more than two points/nodes + L'objecte actiu ha de tenir més de dos punts/nodes - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + El punt final d'una corba Bezier no es pot allisar - + Select an object to convert - Select an object to convert + Seleccione un objeto para convertir - + Select an object to array - Select an object to array + Seleccioneu un objecte matriu - + Please select base and path objects - Please select base and path objects + Seleccioneu un objecte base i una trajectòria - + Please select base and pointlist objects - Please select base and pointlist objects + Seleccioneu objectes de base i de llista de punts - + Select an object to clone - Select an object to clone + Seleccioneu un objecte per a clonar - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Selecciona cara(es) d'un objecte(s) existent(s) - + Select an object to mirror - Select an object to mirror + Seleccioneu un objecte per a reflectir - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines - This tool only works with Wires and Lines - - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: + Aquesta eina sols funciona amb filferros i línies ODA (formerly Teigha) File Converter not found, DWG support is disabled - ODA (formerly Teigha) File Converter not found, DWG support is disabled + No s'ha trobat el convertidor de fitxers ODA ( anteriorment Teigha), el suport DWG està desactivat - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s comparteix una base amb %d altres objectes. Comproveu si voleu modificar això. Subelement mode - Subelement mode + Mode sub-element - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Commuta l'edició del radi i de l'arc dels angles - + Modify subelements - Modify subelements + Modifica els sub-elements - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Si està marcat, els sub-elements es modificaran en lloc dels objectes sencers - + CubicBezCurve - CubicBezCurve + CorbaBézierCúbica - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Escala - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Planta + + + + Front + Alçat + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotació + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Selecciona un objecte per a editar + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Calat + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitats + + + + Wire tools + Eines de filferro + + + + Snapping + Ajusta + diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index 502604d2b3..431e0d74c6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 04133e9913..c5728f5fbc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definuje vzor šrafování - + Sets the size of the pattern Nastaví velikost vzoru - + Startpoint of dimension Počáteční bod rozměru - + Endpoint of dimension Koncový bod rozměru - + Point through which the dimension line passes Bod, přes který prochází rozměr - + The object measured by this dimension Objekt měřený tímto rozměrem - + The geometry this dimension is linked to Geometrie ke které je připojen tento rozměr - + The measurement of this dimension Měření tohoto rozměru - + For arc/circle measurements, false = radius, true = diameter Pro měření oblouku/kružnice, nepravda = rádius, pravda = průměr - + Font size Velikost písma - + The number of decimals to show Počet desetinných míst pro zobrazení - + Arrow size Velikost šipky - + The spacing between the text and the dimension line Mezera mezi textem a kótovací čarou - + Arrow type Typ šipky - + Font name Název písma - + Line width Tloušťka čáry - + Line color Barva čáry - + Length of the extension lines Délka vynášecích čar - + Rotate the dimension arrows 180 degrees Otočit kótovací šipky o 180° - + Rotate the dimension text 180 degrees Otočit text rozměru o 180° - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position Pozice textu. Použij (0,0,0) pro automatickou pozici - + Text override. Use $dim to insert the dimension length Přepsání textu. Použijte $dim pro vložení kóty délky - + A unit to express the measurement. Leave blank for system default Jednotka pro popis měření. Ponechte prázdné pro výchozí nastavení - + Start angle of the dimension Počáteční úhel kóty - + End angle of the dimension Koncový úhel kóty - + The center point of this dimension Středový bod tohoto rozměru - + The normal direction of this dimension Normálový směr tohoto rozměru - + Text override. Use 'dim' to insert the dimension length Přepsání textu. Použijte 'dim' pro vložení kóty délky - + Length of the rectangle Délka obdélníku - + Radius to use to fillet the corners Rádius pro zaoblení rohů - + Size of the chamfer to give to the corners Velikost zkosení rohů - + Create a face Vytvořit plochu - + Defines a texture image (overrides hatch patterns) Definuje obrázek textury (přepíše vzory šrafování) - + Start angle of the arc Počáteční bod oblouku - + End angle of the arc (for a full circle, give it same value as First Angle) Koncový úhel oblouku (pro celou kružnici použijte hodnotu Prvního úhlu) - + Radius of the circle Poloměr kružnice - + The minor radius of the ellipse Vedlejší poloměr elipsy - + The major radius of the ellipse Hlavní poloměr elipsy - + The vertices of the wire Vrcholy drátu - + If the wire is closed or not Je-li drát uzavřený nebo ne - + The start point of this line Počáteční bod této čáry - + The end point of this line Koncový bod této čáry - + The length of this line Délka této čáry - + Create a face if this object is closed Vytvořit plochu, je-li tento objekt uzavřený - + The number of subdivisions of each edge Počet dělení každé hrany - + Number of faces Počet ploch - + Radius of the control circle Poloměr řídící kružnice - + How the polygon must be drawn from the control circle Jak má být mnohoúhelník vytvořen z řídící kružnice - + Projection direction Směr projekce - + The width of the lines inside this object Šířka čar uvnitř tohoto objektu - + The size of the texts inside this object Velikost textů uvnitř tohoto objektu - + The spacing between lines of text Mezery mezi řádky textu - + The color of the projected objects Barva promítnutých objektů - + The linked object Propojený objekt - + Shape Fill Style Styl výplně tvaru - + Line Style Styl čáry - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Vytvořit plochu, je-li tento splajn uzavřený - + Parameterization factor Faktor parametrizace - + The points of the Bezier curve Body Beziérovy křivky - + The degree of the Bezier function Stupeň Beziérovy funkce - + Continuity Pokračování - + If the Bezier curve should be closed or not Má-li být Beziérova křivka uzavřená nebo ne - + Create a face if this curve is closed Vytvořit plochu, je-li tato křivka uzavřená - + The components of this block Komponenty tohoto bloku - + The base object this 2D view must represent Základní objekt, který má reprezentovat tento 2D pohled - + The projection vector of this object Vektor projekce tohoto objektu - + The way the viewed object must be projected Způsob kterým má být objekt promítnut - + The indices of the faces to be projected in Individual Faces mode Indexy ploch při promítání v módu Individuální plochy - + Show hidden lines Zobrazit skryté čáry - + The base object that must be duplicated Základní objekt který má být duplikován - + The type of array to create Typ pole, které má být vytvořeno - + The axis direction Směr osy - + Number of copies in X direction Poče kopií ve směru X - + Number of copies in Y direction Počet kopií ve směru Y - + Number of copies in Z direction Počet kopií ve směru Z - + Number of copies Počet kopií - + Distance and orientation of intervals in X direction Délka a orientace intervalů ve směru X - + Distance and orientation of intervals in Y direction Délka a orientace intervalů ve směru Y - + Distance and orientation of intervals in Z direction Délka a orientace intervalů ve směru Z - + Distance and orientation of intervals in Axis direction Délka a orientace intervalů ve směru osy - + Center point Počátek - + Angle to cover with copies Úhel pokrytý kopiemi - + Specifies if copies must be fused (slower) Určuje, jestli mají být kopie sloučny (pomalejší) - + The path object along which to distribute objects Objekt trajektorie, po které se mají objekty rozmístit - + Selected subobjects (edges) of PathObj Vybrané podobjekty (hrany) z PathObj - + Optional translation vector Volitelný translační vektor - + Orientation of Base along path Orientace základny podél trajektorie - + X Location Poloha X - + Y Location Poloha Y - + Z Location Poloha Z - + Text string Textový řetězec - + Font file name Název souboru písma - + Height of text Výška textu - + Inter-character spacing Rozestupy mezi znaky - + Linked faces Propojené plochy - + Specifies if splitter lines must be removed Specifikuje, jestli mají být odstraněny dělící čáry - + An optional extrusion value to be applied to all faces Hodnota volitelného vysunutí pro všechny plochy - + Height of the rectangle Výška obdélníku - + Horizontal subdivisions of this rectangle Horizontální dělení tohoto obdélníku - + Vertical subdivisions of this rectangle Vertikální dělení tohoto obdélníku - + The placement of this object Umístění tohoto objektu - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location V módu Dělicích čar a Dělicích ploch zůstanou plochy v místě řezu - + The base object is the wire, it's formed from 2 objects Základním objektem je drát složený ze 2 objeků - + The tool object is the wire, it's formed from 2 objects Nástrojovým objektem je drát složený ze 2 objeků - + The length of the straight segment Délka přímého segmentu - + The point indicated by this label Bod označený tímto popiskem - + The points defining the label polyline Body definující lomenou čáru popisku - + The direction of the straight segment Směř přímého úseku - + The type of information shown by this label Typ informace zobrazené tímto popiskem - + The target object of this label Cílový objekt tohoto popisku - + The text to display when type is set to custom Text pro zobrazení, když je typ nastaven na Vlastní - + The text displayed by this label Text zobrazený tímto popiskem - + The size of the text Velikost textu - + The font of the text Písmo textu - + The size of the arrow Velikost šipky - + The vertical alignment of the text Svislé zarovnání textu - + The type of arrow of this label Typ šipky tohoto popisku - + The type of frame around the text of this object Typ rámečku kolem textu tohoto objektu - + Text color Barva textu - + The maximum number of characters on each line of the text box Maximální počet znaků na každém řádku textového pole - + The distance the dimension line is extended past the extension lines Vzdálenost kótovací čáry je rozšířena za rozšiřitelnost čáry - + Length of the extension line above the dimension line Délka prodloužení nad kótovací čárou - + The points of the B-spline Body B-splajnu - + If the B-spline is closed or not Je-li B-splajn uzavřený nebo ne - + Tessellate Ellipses and B-splines into line segments Teselovat Elipsy a B-splajny na segmenty čar - + Length of line segments if tessellating Ellipses or B-splines into line segments Délka čar segmentů při teselaci Elips a B-splajnů na segmenty čar - + If this is True, this object will be recomputed only if it is visible Je-li to pravda, objekt bude přepočítán pouze, když je viditelný - + Base Základna - + PointList Body - + Count Počet - + The objects included in this clone Objekty zahrnuté v tomto klonování - + The scale factor of this clone Měřítko klonování - + If this clones several objects, this specifies if the result is a fusion or a compound Při klonování několika objektů se tímto určuje, má-li být výsledek sloučením nebo složeninou - + This specifies if the shapes sew To určuje, zda je obrazec přišitý - + Display a leader line or not Zobrazit vodící čáry - + The text displayed by this object Text zobrazený tímto objektem - + Line spacing (relative to font size) Rozteč řádků (vzhledem k velikosti písma) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Sklon - + Scale Změna velikosti - + Writing camera position Zápis polohy kamery - + Writing objects shown/hidden state Zápis stavu skrytých/zobrazených objektů - + X factor Měřítko X - + Y factor Měřítko Y - + Z factor Měřítko Z - + Uniform scaling Rovnoměrné měřítko - + Working plane orientation Orientace pracovní roviny @@ -781,20 +816,25 @@ Nainstalujte prosím manuálně doplněk dxf-library z menu Nástroje -> Manažer doplňků - + This Wire is already flat Drát je již plochý - + Pick from/to points Výběr z / do bodů - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Sklon pro vybrané Dráty/Čáry: 0 = horizontální, 1 = 45° nahoru, -1 = 45° dolů + + + Create a clone + Vytvořit kopii + DraftShapeStringGui @@ -862,12 +902,12 @@ z menu Nástroje -> Manažer doplňků Draft_AddConstruction - + Add to Construction group Přidat do Konstrukční skupiny - + Adds the selected objects to the Construction group Přidá vybrané objekty do Konstrukční skupiny @@ -875,12 +915,12 @@ z menu Nástroje -> Manažer doplňků Draft_AddPoint - + Add Point Přidat bod - + Adds a point to an existing Wire or B-spline Přidá bod do stávajícího drátu nebo B-splajnu @@ -888,12 +928,12 @@ z menu Nástroje -> Manažer doplňků Draft_AddToGroup - + Move to group... Přesunout do skupiny... - + Moves the selected object(s) to an existing group Přesune vybrané objekty do existující skupiny @@ -901,12 +941,12 @@ z menu Nástroje -> Manažer doplňků Draft_ApplyStyle - + Apply Current Style Použít aktuální styl - + Applies current line width and color to selected objects Použít aktuální tloušťku čáry a barvu na vybrané objekty @@ -914,12 +954,12 @@ z menu Nástroje -> Manažer doplňků Draft_Arc - + Arc oblouk - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ z menu Nástroje -> Manažer doplňků Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ z menu Nástroje -> Manažer doplňků Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ z menu Nástroje -> Manažer doplňků Draft_Array - + Array Pole - + Creates a polar or rectangular array from a selected object Vytvoří polární nebo obdelníkové pole z vybraných objektů @@ -961,12 +1001,12 @@ z menu Nástroje -> Manažer doplňků Draft_AutoGroup - + AutoGroup Automatické seskupování - + Select a group to automatically add all Draft & Arch objects to Vyberte skupinu, do které budou automaticky přidány všechny Draft a Arch objekty @@ -974,12 +1014,12 @@ z menu Nástroje -> Manažer doplňků Draft_BSpline - + B-spline B-splajn - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Vytvoří B-splajn z více bodů. CTRL pro uchopení, SHIFT pro omezení @@ -987,12 +1027,12 @@ z menu Nástroje -> Manažer doplňků Draft_BezCurve - + BezCurve Beziérova křivka - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Vytvoří Bezierovu křivku. Stiskni CTRL pro přichycení, SHIFT pro zavazbení. @@ -1000,7 +1040,7 @@ z menu Nástroje -> Manažer doplňků Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ z menu Nástroje -> Manažer doplňků Draft_Circle - + Circle Kruh - + Creates a circle. CTRL to snap, ALT to select tangent objects Vytvoří kruh. CTRL pro přichycení, ALT vybere objekty na tangentě @@ -1021,12 +1061,12 @@ z menu Nástroje -> Manažer doplňků Draft_Clone - + Clone Klon - + Clones the selected object(s) Naklonuje vybrané objekty @@ -1034,12 +1074,12 @@ z menu Nástroje -> Manažer doplňků Draft_CloseLine - + Close Line Uzavření čáry - + Closes the line being drawn Zavřená čára nakreslena @@ -1047,12 +1087,12 @@ z menu Nástroje -> Manažer doplňků Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Odstranit bod - + Removes a point from an existing Wire or B-spline Odstraní bod z existujícího drátu nebo B-splajnu @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Rozměr - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Vytvoří rozměr. CTRL pro přichycení, SHIFT pro omezení, ALT vybere segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Ponížení - + Explodes the selected objects into simpler objects, or subtracts faces Rozloží vybrané objekty na jednodušší objekty nebo odečte plochy @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Skica z Návrhu - + Convert bidirectionally between Draft and Sketch objects Převést vzájemně mezi objekty Návrhu a Skici @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Výkres - + Puts the selected objects on a Drawing sheet Umístí vybrané objekty na list výkresu @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Upravit - + Edits the active object Upravuje aktivní objekt @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Vytvoří elipsu. Stiskni CTRL pro přichycení. @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Svázat plochy - + Creates a facebinder object from selected face(s) Vytvoří objekt svázaných ploch z vybraných ploch @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Cílová čára - + Finishes a line without closing it Ukončí čáru bez uzavření @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Obrať rozměr - + Flip the normal direction of a dimension Obrátí směr normály rozměru @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Léčit - + Heal faulty Draft objects saved from an earlier FreeCAD version Léčí objekty Návrhu uložené v dřívějších verzích FreeCADu @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Spojit - + Joins two wires together Spojí dohromady dva dráty @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Vytvoří popisek, volitelně připojený k vybranému objektu nebo elementu + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Čára - + Creates a 2-point line. CTRL to snap, SHIFT to constrain vytvoří čáru 2 body. CTRL pro uchopení, SHIFT pro vynucení @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Zrcadlit - + Mirrors the selected objects along a line defined by two points Ozrcadlí vybrané objekty podél čáry definované dvěma body @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Přesun - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Odstup - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Posune aktivní objekt. CTRL pro přichycení, SHIFT pro omezení, ALT pro kopírování @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Dráha pole - + Creates copies of a selected object along a selected path. Vytvoří kopije z vybraných objektů podél vybrané dráhy. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Bod - + Creates a point object Vytvoří bodový objekt @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Bodové pole - + Creates copies of a selected object on the position of points. Vytvoří kopii vybraného objektu na pozici bodů. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Mnohoúhelník - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Vytváří pravidelný mnohoúhelník. CTRL pro přichycení, SHIFT pro omezení @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Obdélník - + Creates a 2-point rectangle. CTRL to snap Vytvoří obdélník 2-body. CTRL pro uchopení @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rotace - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Otočí vybrané objekty. CTRL pro přichycení, SHIFT pro omezení, ALT vytvoří kopii @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Změna velikosti - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Změní velikost vybraných objektů ze základního bodu. CTRL pro přichycení, SHIFT pro omezení, ALT pro kopírování @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Vybrat skupinu - + Selects all objects with the same parents as this group Vybere všechyn objekty se společnými předky jako skupinu @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Výběr roviny - + Select a working plane for geometry creation Vyberte pracovní rovinu pro tvorbu geometrie @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Vytvoří náhradní objekt ze současné pracovní plochy - + Create Working Plane Proxy Vytvořit náhradní pracovní rovinu @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D průmět - + Creates Shape 2D views of selected objects Vytvoří 2D průmět vybraných objektů @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Obrazec z textu... - + Creates text string in shapes. Vytvoří text v obrazci. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Zobrazit přichytávací panel - + Shows Draft snap toolbar Zobrazit Přichytávací nástrojový panel @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Nastavit sklon - + Sets the slope of a selected Line or Wire Nastaví sklon vybrané čáry nebo drátu @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Úhly - + Snaps to 45 and 90 degrees points on arcs and circles Zachytávání na bodech po 45 a 90 stupňích na kruzích a elipsách @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Střed - + Snaps to center of circles and arcs Přichytit na střed kruhů nebo oblouků @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Rozměry - + Shows temporary dimensions when snapping to Arch objects Zobrazuje dočasný rozměr když se přichytává k objektům @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Koncový bod - + Snaps to endpoints of edges Přichytí do koncového bodu hrany @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Prodloužit - + Snaps to extension of edges Přichytí do prodloužení hrany @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Mřížka - + Snaps to grid points Přichytí na body mřížky @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Průnik - + Snaps to edges intersections Přichytí na průsečík hran @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Přepínač On/Off - + Activates/deactivates all snap tools at once Aktivace/deaktivace všech nástrojů najednou - + Lock Zamknout @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Bod uprostřed - + Snaps to midpoints of edges Přichytí na bod uprostřed hrany @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Nejbližší - + Snaps to nearest point on edges Přichytí k nejbližšímu bodu hrany @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Pravoůhle - + Snaps to orthogonal and 45 degrees directions Přichytí pravoůhle a ve směrech pod 45 stupni @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Rovnoběžně - + Snaps to parallel directions of edges Přichtí rovnoběžně ke směru hrany @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Kolmo - + Snaps to perpendicular points on edges Přichytí kolmo v bodě na hraně @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Speciální - + Snaps to special locations of objects Přichytává ke speciálním polohám objektů @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Pracovní rovina - + Restricts the snapped point to the current working plane Omezení přichtávání bodů na aktuální pracovní rovinu @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Rozdělit - + Splits a wire into two wires Rozdělí drát na dva dráty @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Protažení - + Stretches the selected objects Roztáhne vybrané objekty @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Vytvoří anotace. CTRL na přichycení @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Přepíná režim konstrukce pro další objekty. - + Toggle Construction Mode Přepnout konstrukční mód @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Přepnout opakování režimu - + Toggles the Continue Mode for next commands. Zapne/vypne režim pokračování pro příští příkaz. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Přepnout režim zobrazení - + Swaps display mode of selected objects between wireframe and flatlines Přepne režim zobrazení vybraných objektů mezi drátěným a stínovaným @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Přepnout mřížku - + Toggles the Draft grid on/off Přepne mřížku Návrhu - zapnuto/vypnuto - + Grid Mřížka - + Toggles the Draft grid On/Off Přepne mřížku Návrhu - Zapnuto/Vypnuto @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Ořízne nebo prodlouží vybraný objekt, nebo vysune samostatnou plochu. CTRL úchop, SHIFT omezení vzhledem k aktuálnímu segmentu nebo k normále, ALT obrácení @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Vrátit zpět poslední segment - + Undoes the last drawn segment of the line being drawn Vrátí zpět poslední nakreslený segment kreslené čáry @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Povýšení - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Spojí vybrané objekty do jednoho nebo převede uzavřené dráty na plochy nebo spojí plochy - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Přidá VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Vytvoří multibodovou Návrhovou křivku (Dwire). CTRL pro přichycení, SHIFT pro omezení + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline B-splajn z drátu - + Converts between Wire and B-spline Převede mezi drátem a B-splajnem @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Obecné návrh nastavení - + This is the default color for objects being drawn while in construction mode. Toto je výchozí barva pro objekty nakreslena v konstrukčním režimu. - + This is the default group name for construction geometry Toto je výchozí název skupiny pro konstrukční geometrii - + Construction Konstrukce @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainUložit aktuální barvy a čáry během sezení - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Pokud je toto políčko zaškrtnuto, režim kopírování bude zachován během příkazu, jinak příkazy vždy spustí v no-copy režimu - + Global copy mode globální režim kopírování - + Default working plane Výchozí pracovní rovina - + None Žádný - + XY (Top) XY (nahoře) - + XZ (Front) XZ (přední) - + YZ (Side) YZ (strana) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Obecná nastavení - + Construction group name Název konstrukční skupiny - + Tolerance Odchylka @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Zde můžete specifikovat cestu k SVG souborům obsahující definice <pattern>, které mohou být přidány ke standardním šrafovacím vzorům Návrhu - + Draft interface mode Režim rozhraní Návrhu - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Toto je režim uživatelského rozhraní, ve kterém bude pracovat modul Návrh: režim panelu nástrojů umístí všechna nastavení na oddělený panel nástrojů, zatímco režim panelu úkolů bude používat záložku Úkoly ve FreeCadu pro veškerou komunikaci s uživatelem - + Toolbar Nástrojový panel - + Taskview Záložka Úkoly @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt mód - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normálně jsou po kopírování objektů vybrány kopie. Je-li tato nabídka zaškrtnuta, tak jsou místo toho vybrány původní objekty. - + Select base objects after copying Vybrat základní objekty po kopírování @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Hlavní čáry budou kresleny silněji. Zadejte kolik slabých má být mezi hlavními. - + Internal precision level Stupeň vnitřní přesnosti @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Přeložit bílou barvu čáry na černou - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Je-li zaškrtnuto, Návrhové nástroje budou kreslit primitivy Dílů namísto objektů Návrhu, pokud to jde. - + Use Part Primitives when available Vytvářet Part primitivy, pokud to jde @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Přichytávat vždy (zablokuje mód přichytávání) - - Construction geometry - Geometrická konstrukce - - - + Construction geometry color Barva konstrukční geometrie @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Vyberte soubor písma - + Fill objects with faces whenever possible Vyplnit objekty plochou, kdykoliv je to možné @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatické aktualizace (pouze starší importy) - + Prefix labels of Clones with: Předpona popisků při klonování: @@ -2714,7 +2744,7 @@ Např. pro soubor v milimetrech: 1, v centimetrech: 10, v metrech: 1000, v palc Toto je metoda vybraná pro import barvy SVG objektů do FreeCADu. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Je-li zaškrtnuto, objekty se objeví vyplněné. Jnak budou ve výchozím nastavení drátěné @@ -2794,17 +2824,7 @@ Např. pro soubor v milimetrech: 1, v centimetrech: 10, v metrech: 1000, v palc Je-li zaškrtnuto, objekty ze stejných vrstev budou sloučeny do Draft bloků, což zrychlí zobrazení, ale jejich úpravy budou obtížnější - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Je-li zaškrtnuto, při použití příkazu Návrhu se zobrazí ve Výstupním okně instrukce v krocích - - - - Verbose command line mode - Příkazový řádek v podrobném módu - - - + When drawing lines, set focus on Length instead of X coordinate Při kreslení čar zaměřit na Délku namísto souřadnice X @@ -2884,12 +2904,12 @@ Např. pro soubor v milimetrech: 1, v centimetrech: 10, v metrech: 1000, v palc Max. segment splajnu: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,693 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Konstrukční geometrie + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativní + + + + R + R + + + + Continue + Pokračovat + + + + T + T + + + + Close + Zavřít + + + + O + O + + + + Copy + Kopírovat + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Vyplnit + + + + L + L + + + + Exit + Odejít + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Délka + + + + H + H + + + + Wipe + Vyčistit + + + + W + W + + + + Set WP + Nastavit PR + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Omezit X + + + + X + X + + + + Restrict Y + Omezit Y + + + + Y + Y + + + + Restrict Z + Omezit Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Úchopy návrhu - - - Draft creation tools - Kreslící nástroje Návrhu - - - - Draft modification tools - Modifikační nástroje Návrhu - - - - Utilities - Nástroje - - - - Wire tools - Nástroje drátu - - - - Snapping - Přichycení - draft - + not shape found nebyl nalezen tvar - + All Shapes must be co-planar Všechny tvary musejí být koplanární (v jedné rovině) - + The given object is not planar and cannot be converted into a sketch. Daný objekt není rovinný a nelze převést na náčrt. - + Unable to guess the normal direction of this object Nelze určit normálu tohoto objektu - + Draft Command Bar Příkazový panel Návrhu - + Toggle construction mode Přepnout konstrukční mód - + Current line color Současná barva čáry - + Current face color Aktuální barva plochy - + Current line width Aktuální šířka čáry - + Current font size Aktuální velikost písma - + Apply to selected objects použít na vybrané objekty - + Autogroup off Automatické seskupování vypnuto - + active command: aktivní příkaz: - + None Žádný - + Active Draft command aktivní příkaz návrhu - + X coordinate of next point X souřadnice dalšího bodu - + X X - + Y Y - + Z Z - + Y coordinate of next point Y souřadnice dalšího bodu - + Z coordinate of next point Z souřadnice dalšího bodu - + Enter point Zadejte bod - + Enter a new point with the given coordinates Zadejte nový bod s danými souřadnicemi - + Length Délka - + Angle Úhel - + Length of current segment Délka aktuálního segmentu - + Angle of current segment Úhel aktuálního segmentu - + Radius Poloměr - + Radius of Circle Poloměr kruhu - + If checked, command will not finish until you press the command button again Je-li zaškrtnuto, příkaz se nedokončí, dokud nestisknete znovu na příkazové tlačítko - + If checked, an OCC-style offset will be performed instead of the classic offset Je-li zaškrtnuto, bude uplatněn OCC-styl odsazení namísto klasického odsazení - + &OCC-style offset &OCC-styl odstupu - + Add points to the current object Přidá body k aktuálnímu objektu - + Remove points from the current object Odstraní body z aktuálního objektu - + Make Bezier node sharp Změní Beziérův uzel na ostrý - + Make Bezier node tangent Změní Beziérův uzel na tangentní - + Make Bezier node symmetric Změní Beziérův uzel na symetrický - + Sides Strany - + Number of sides Počet stran - + Offset Odstup - + XY (top) XY (horní) - - Select XY plane - Vyberte rovinu XY - - - + XZ (front) XZ (přední) - - Select XZ plane - Vyberte rovinu XY - - - + YZ (side) YZ (boční) - - Select YZ plane - Vyberte rovinu YZ - - - + View Pohled - - Select plane perpendicular to the current view - Vyberte rovinu kolmou na aktuální pohled - - - + Auto Automaticky - - Do not project points to a drawing plane - nepromítat body do kreslící roviny - - - + Text string to draw Textový řetězec k vykreslení - + String Řetězec - + Height of text Výška textu - + Height Výška - + Intercharacter spacing Rozestupy mezi znaky - + Tracking Sledování - + Full path to font file: Úplná cesta k souboru písma: - + Open a FileChooser for font file Otevře dialogové okno pro výběr souboru písma - + Grid spacing Rozteč mřížky - + The spacing between the grid lines Rozestupy mezi čarami mřížky - + Main line every Hlavní čára každých - + The number of lines between main lines Počet čar mezi hlavními čarami - + Center plane on view Vystředit rovinu v pohledu - - Select Plane - Vyberte rovinu - - - + Line Čára - + DWire DWire - + Circle Kruh - + Center X Střed X - + Arc oblouk - + Point Bod - + Label Label - + Distance Distance - + Trim Oříznout - + Pick Object Vybrat objekt - + Edit Upravit - + Global X Globální X - + Global Y Globální Y - + Global Z Globální Z - + Local X Lokální X - + Local Y Lokální Y - + Local Z Lokální Z - + Invalid Size value. Using 200.0. Neplatná hodnota velikosti. Použito 200,0. - + Invalid Tracking value. Using 0. Neplatná hodnota sledování. Použito 0. - + Please enter a text string. Vložte textový řetězec, prosím. - + Select a Font file Vyberte soubor písma - + Please enter a font file. Vložte, prosím, soubor písma. - + Autogroup: Automatické seskupování: - + Faces Plochy - + Remove Odstranit - + Add Přidat - + Facebinder elements Svázané plochy - + Create Line Vytvoří čáru - - Pick next point: - - Vyberte další bod: - - - + Convert to Wire Převést na Drát - + BSpline BSplajn - + BezCurve Beziérova křivka - + Create BezCurve Vytvoří Beziérovu křivku - + Rectangle Obdélník - + Create Plane Vytvoří rovinu - + Create Rectangle Vytvořit obdélník - + Create Circle Vytvořit kruh - + Create Arc Vytvořit oblouk - + Start Angle Počáteční úhel - + Aperture Výseč - + Polygon Mnohoúhelník - + Create Polygon Vytvořit mnohoúhelník - + Ellipse Elipsa - + Create Ellipse Vytvoří elipsu - + Text Text - + Create Text Vytvořit text - + Dimension Rozměr - + Create Dimension Vytvořit kótu - + ShapeString Tvar písma - + Create ShapeString Vytvoří Tvar písma - + Copy Kopírovat - + Move Přesun - + Change Style Změnit styl - + Rotate Rotace - - Cannot offset this object type - - Nelze ofsetovat tento typ objektu - - - + Stretch Protažení - + Upgrade Povýšení - + Downgrade Ponížení - + Selection is not a Knot Ve výběru není uzel - + Convert to Sketch Převést na náčrt - + Convert to Draft Převést na Návrh - + Convert Převést - + Array Pole - + Create Point Vytvoří bod - + Mirror Zrcadlit - + &Draft &Návrh @@ -3609,179 +3777,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Chcete umožnit FreeCADu stáhnout tyto knihovny? - + Draft.makeBSpline: not enough points Draft.makeBSpline: nedostatek bodů - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Shodné koncové body byly uzavřeny - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Neplatný seznam bodů - + No object given Není zadán objekt - + The two points are coincident Dva body jsou shodné - + Found groups: closing each open object inside Nalezené skupiny: uzavírání každého otevřeného objektu uvnitř - + Found mesh(es): turning into Part shapes Nalezena síť (sítě): změna na tvary Dílu - + Found 1 solidifiable object: solidifying it Nalezen 1 objekt k vytvoření tělesa: vytváření tělesa - + Found 2 objects: fusing them Nalezeny 2 objekty: jejich slučování - + Found several objects: creating a shell Nalezeno několik objektů: vytváření skořepiny - + Found several coplanar objects or faces: creating one face Nalezeno několik koplanárních objektů nebo ploch: vytváření jedné plochy - + Found 1 non-parametric objects: draftifying it Nalezen 1 neparametrický objekt: převádění na parametrický drát Návrhu - + Found 1 closed sketch object: creating a face from it Nalezen 1 uzavřený náčrt: vytváření plochy z něj - + Found 1 linear object: converting to line Nalezen 1 lineární objekt: převádění na čáru - + Found closed wires: creating faces Nalezeny uzavřené dráty: vytváření ploch - + Found 1 open wire: closing it Nalezen 1 otevřený drát: jeho uzavírání - + Found several open wires: joining them Nalezeno několik otevřených drátů: jejich spojování - + Found several edges: wiring them Nalezeno několik hran: jejich spojování do drátu - + Found several non-treatable objects: creating compound Nalezeno několik neléčitelných objektů: vytváření složeniny - + Unable to upgrade these objects. Nelze povýšit tyto objekty. - + Found 1 block: exploding it Nalezen 1 blok: jeho rozkládání - + Found 1 multi-solids compound: exploding it Nalezena 1 více-tělesová složenína: její rozkládání - + Found 1 parametric object: breaking its dependencies Nalezen 1 parametrický objekt: rozbíjení jeho závislostí - + Found 2 objects: subtracting them Nalezeny 2 objekty: jejich odečítání - + Found several faces: splitting them Nalezeno několik ploch: jejich rozdělování - + Found several objects: subtracting them from the first one Nalezeno několik objektů: jejich odečítání od prvního - + Found 1 face: extracting its wires Nalezena 1 plocha: extrahování jejích drátů - + Found only wires: extracting their edges Nalezeny pouze dráty: extrahování jejich hran - + No more downgrade possible Není možné další ponížení - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Uzavřeno s některým prvním/posledním bodem. Geometrie není aktualizovaná. - + No point found Nebyl nalezen bod - + ShapeString: string has no wires Tvar písma: řetězec nemá dráty - + Relative Relativní - + Continue Pokračovat - + Close Zavřít @@ -3826,7 +3994,7 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Omezit Z - + Select edge Výběr hrany @@ -3841,7 +4009,7 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Režim délky - + Wipe Vyčistit @@ -3856,454 +4024,279 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Cyklovat přichycený objekt - + Check this to lock the current angle Zaškrtněte pro uzamčení aktuálního úhlu - + Coordinates relative to last point or absolute Souřadnice vzhledem k poslednímu bodu nebo absolutní - + Filled Vyplněné - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Zaškrtněte, jestliže se má zobrazit objekt vyplněný, jinak se zobrazí jako drátěný - - - + Finish Dokončit - + Finishes the current drawing or editing operation Dokončí aktuální kreslicí nebo upravovací operaci - + &Undo (CTRL+Z) Zpět (CTRL+Z) - + Undo the last segment Vrátit zpět poslední segment - + Finishes and closes the current line Dokončí a uzavře aktuální čáru - + Wipes the existing segments of this line and starts again from the last point Vymaže dosavadní segmenty této čáry a začne znovu z posledního bodu - + Set WP Nastavit PR - + Reorients the working plane on the last segment Přeorientuje pracovní rovinu na poslední segment - + Selects an existing edge to be measured by this dimension Vybere existující hranu pro změření touto kótou - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Je-li zaškrtnuto, objekty budou kopírovány namísto přesunutí. Nastavení -> Draft -> Globální režim kopírování přednastaví tento mód pro další příkazy - - options - možnosti - - - + Default Výchozí - + Pick a face to define the drawing plane Vyberte plochu pro definici kreslící roviny - - First point: - První bod: - - - - Closing - Uzavření - - - + Create Wire Vytvořit drát - - Removing last point - Odstranění posledního bodu - - - - Next point: - Další bod: - - - - Restarting from - Restartování od - - - + Unable to create a Wire from selected objects Z vybraných objektů nelze vytvořit Drát - + Spline has been closed Křivka byla uzavřena - + Last point has been removed Poslední bod byl odstraněn - - Pick next point, or Finish (shift-F) or close (o): - Vyberte další bod nebo zkončete (shif-F) nebo uzavřete (o): - - - + Create B-spline Vytvoří B-splajn - + Bezier curve has been closed Beziérova křivka byla uzavřena - - Pick first point: - Vyberte první bod: - - - - Pick opposite point: - Vyberte opační bod: - - - - Pick center point: - Vyberte středový bod: - - - - Pick radius: - Vyberte poloměr: - - - - Pick start angle: - Vyberte počáteční úhel: - - - - Pick aperture: - Vyberte výseč: - - - - Aperture angle: - Výsečový úhel: - - - - Pick location point: - Vyberte bod umístění: - - - + Edges don't intersect! Hrany se neprotínají! - + Pick ShapeString location point: Zvolte bod umístění Tvaru písma: - + Select an object to move Vyberte objekt pro přesunutí - - Pick start point: - Vyberte bod začátku: - - - - Pick end point: - Vyberte bod konce: - - - + Select an object to rotate Vyberte objekt pro rotaci - - Pick rotation center: - Zvolte střed otáčení: - - - - Pick base angle: - Vyberte základní úhel: - - - - Pick rotation angle: - Zvolte úhel natočení: - - - + Select an object to offset Vyberte objekt pro odsazení - + Offset only works on one object at a time Odsazení funguje současně pouze na jednom objektu - + Sorry, offset of Bezier curves is currently still not supported Je nám líto, ale odsazení Bezierovy křivky zatím není podporováno - - Pick distance: - Zvolte vzdálenost: - - - + Select an object to stretch Vyberte objekt pro natažení - - Pick first point of selection rectangle: - Vyberte první bod obdélníku výběru: - - - - Pick opposite point of selection rectangle: - Vyberte opačný bod obdélníku výběru: - - - - Pick start point of displacement: - Vyberte počáteční bod posunutí: - - - - Pick end point of displacement: - Vyberte koncový bod posunutí: - - - + Turning one Rectangle into a Wire Převedení Obdélníku na Drát - + Select an object to join Vyberte objekt pro spojení - + Join Spojit - + Select an object to split Vyberte objekt k rozdělení - + Select an object to upgrade Vyberte objekt pro povýšení - + Select object(s) to trim/extend Vyberte objekt(y) k oříznutí/rozšíření - + Unable to trim these objects, only Draft wires and arcs are supported Tyto objekty nelze oříznout, pouze dráty Návrhu a oblouky jsou podporované - + Unable to trim these objects, too many wires Tyto objekty nelze ořízout, příliš mnoho drátů - + These objects don't intersect Tyto objekty se neprotínají - + Too many intersection points Příliš mnoho průsečíků - + Select an object to scale Vyberte objekt pro škálování - - Pick base point: - Vyberte základní bod: - - - - Pick reference distance from base point: - Vyberte referenční vzdálenosti od základního bodu: - - - - Pick new distance from base point: - Vyberte novou vzdálenost od základního bodu: - - - + Select an object to project Vyberte objekt k promítnutí - - This object type is not editable - Tento typ objektu není upravitelný - - - + Please select only one object Prosím vyberte pouze jeden objekt - + Select a Draft object to edit Vyberte objekt Návrhu k editaci - + Active object must have more than two points/nodes Aktivní objekt musí mít více než dva body/uzly - + Endpoint of BezCurve can't be smoothed Koncový bod Beziérovy křivky nemůže být uhlazen - + Select an object to convert Vyberte objekt k převedení - + Select an object to array Vyberte objekt pro pole - + Please select base and path objects Vyberte, prosím, základnu a objekt cesty - + Please select base and pointlist objects Vyberte prosím základnu a bodové objekty - + Select an object to clone Vyberte objekt pro klonování - + Select face(s) on existing object(s) Vyberte plochu/y na existujícím objektu/objektech - + Select an object to mirror Vyberte objekt k zrcadlení - - Pick start point of mirror line: - Vyberte počáteční bod osy zrcadlení: - - - - Pick end point of mirror line: - Vyberte koncový bod osy zrcadlení: - - - + This tool only works with Wires and Lines Tento nástroj pracuje pouze s Dráty a Čarami - - - Pick target point: - Vyberte cílový bod: - - - - Pick endpoint of leader line: - Vyberte koncový bod vedoucí čáry: - - - - Pick text position: - Vyberte pozici textu: - ODA (formerly Teigha) File Converter not found, DWG support is disabled Konvertor souborů ODA (dříve Teigha) nebyl nalezen, podpora DWG je vypnuta - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4313,56 +4306,354 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Změna velikosti - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Horní + + + + Front + Přední + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automaticky + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Ponor + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Nástroje + + + + Wire tools + Nástroje drátu + + + + Snapping + Přichycení + diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index b4fefe4cbf..aafac491dc 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 157ed403ae..8bc85f7057 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definiert ein Schraffurmuster - + Sets the size of the pattern Legt die Größe des Musters fest - + Startpoint of dimension Startpunkt der Bemaßung - + Endpoint of dimension Endpunkt der Bemaßung - + Point through which the dimension line passes Punkt, durch den die Maßlinie führt - + The object measured by this dimension Das von dieser Dimension gemessene Objekt - + The geometry this dimension is linked to Die Geometrie, die mit dieser Dimension veknüpft ist - + The measurement of this dimension Das Messen dieser Abmessung - + For arc/circle measurements, false = radius, true = diameter Bei Bogen- / Kreismessungen, falsch = Radius, wahr = Durchmesser - + Font size Schriftgröße - + The number of decimals to show Die Anzahl der Dezimalstellen, die angezeigt werden sollen - + Arrow size Pfeilgröße - + The spacing between the text and the dimension line Der Abstand zwischen dem Text und der Maßlinie - + Arrow type Pfeiltyp - + Font name Schriftname - + Line width Linienbreite - + Line color Linienfarbe - + Length of the extension lines Länge der Maßhilfslinien - + Rotate the dimension arrows 180 degrees Drehen Sie die Abmessungspfeile um 180 Grad - + Rotate the dimension text 180 degrees Drehen Sie den Bemaßungstext um 180 Grad - + Show the unit suffix Einheitensuffix anzeigen - + The position of the text. Leave (0,0,0) for automatic position Die Position des Textes. Belassen von (0,0,0) für automatische Position - + Text override. Use $dim to insert the dimension length Text überschreiben. Verwenden Sie $dim, um die Maßlänge einzufügen - + A unit to express the measurement. Leave blank for system default Eine Einheit, um die Messung auszudrücken. Leer lassen für Systemstandard - + Start angle of the dimension Startwinkel des Maß - + End angle of the dimension Endwinkel des Maß - + The center point of this dimension Der Mittelpunkt dieser Bemaßung - + The normal direction of this dimension Die Richtung des Normals dieser Abmessung - + Text override. Use 'dim' to insert the dimension length Text überschreiben. Verwenden Sie '$dim', um die Maßlänge einzufügen - + Length of the rectangle Länge des Rechtecks - + Radius to use to fillet the corners Zu verwendender Radius der Rundung - + Size of the chamfer to give to the corners Größe der Schräge für die Ecken - + Create a face Fläche erzeugen - + Defines a texture image (overrides hatch patterns) Definiert ein Texturbild (überschreibt Schraffurmuster) - + Start angle of the arc Startwinkel des Bogens - + End angle of the arc (for a full circle, give it same value as First Angle) Endwinkel des Bogens (für einen Vollkreis, geben Sie Ihm den gleichen Wert wie für den ersten Winkel) - + Radius of the circle Radius des Kreises - + The minor radius of the ellipse Der kleinere Radius der Ellipse - + The major radius of the ellipse Der Hauptradius der Ellipse - + The vertices of the wire Die Ecken des Drahtes - + If the wire is closed or not Ob der Draht geschlossen ist oder nicht - + The start point of this line Der Anfangspunkt dieser Linie - + The end point of this line Der Endpunkt dieser Linie - + The length of this line Die Länge dieser Linie - + Create a face if this object is closed Erstellen einer Fläche, wenn dieses Objekt geschlossen wird - + The number of subdivisions of each edge Die Anzahl der Unterteilungen jeder Kante - + Number of faces Anzahl der Flächen - + Radius of the control circle Radius des Kontrollkreises - + How the polygon must be drawn from the control circle Wie das Polygon aus dem Kontrollkreis gezogen werden muss - + Projection direction Projektionsrichtung - + The width of the lines inside this object Die Breite der Linien in diesem Objekt - + The size of the texts inside this object Die Textgröße in diesem Objekt - + The spacing between lines of text Der Abstand zwischen den Textzeilen - + The color of the projected objects Die Farbe der projizierten Objekte - + The linked object Das verknüpfte Objekt - + Shape Fill Style Form Füll-Stil - + Line Style Linienstil - + If checked, source objects are displayed regardless of being visible in the 3D model Wenn aktiviert, werden Quellobjekte angezeigt, unabhängig davon, ob sie im 3D-Modell sichtbar sind - + Create a face if this spline is closed Erstelle eine Fläche, wenn diese Spline geschlossen wird - + Parameterization factor Parametrierfaktor - + The points of the Bezier curve Die Punkte der Bézierkurve - + The degree of the Bezier function Der Grad der Bezier-Funktion - + Continuity Kontinuität - + If the Bezier curve should be closed or not Ob die Bezier-Kurve geschlossen sein soll oder nicht - + Create a face if this curve is closed Erstelle ein Face, wenn diese Kurve geschlossen wird - + The components of this block Die Komponenten dieses Blocks - + The base object this 2D view must represent Das Basisobjekt, das diese 2D-Ansicht darstellen muss - + The projection vector of this object Der Projektionsvektor dieses Objekts - + The way the viewed object must be projected Die Art, wie das betrachtete Objekt projiziert werden muss - + The indices of the faces to be projected in Individual Faces mode Die Indizes der Faces werden im Individual Faces Modus projiziert - + Show hidden lines Verdeckte Linien anzeigen - + The base object that must be duplicated Das Grundobjekt, das dupliziert werden muss - + The type of array to create Die Art des zu erstellenden Arrays - + The axis direction Die Achsenrichtung - + Number of copies in X direction Anzahl der Kopien in X-Richtung - + Number of copies in Y direction Anzahl der Kopien in Y-Richtung - + Number of copies in Z direction Anzahl der Kopien in Z-Richtung - + Number of copies Anzahl der Kopien - + Distance and orientation of intervals in X direction Abstand und Orientierung der Intervalle in X-Richtung - + Distance and orientation of intervals in Y direction Abstand und Orientierung der Intervalle in Y-Richtung - + Distance and orientation of intervals in Z direction Abstand und Ausrichtung der Intervalle in Z-Richtung - + Distance and orientation of intervals in Axis direction Abstand und Ausrichtung der Intervalle in Achsenrichtung - + Center point Mittelpunkt - + Angle to cover with copies Winkel mit Kopien zu überdecken - + Specifies if copies must be fused (slower) Gibt an, ob Kopien verschmolzen werden müssen (langsamer) - + The path object along which to distribute objects Das Pfadobjekt, an dem Objekte verteilt werden - + Selected subobjects (edges) of PathObj Ausgewählte Teilobjekte (Kanten) von PathObj - + Optional translation vector Optionaler Verrückungs Vektor - + Orientation of Base along path Ausrichtung der Basis entlang des Pfads - + X Location X-Position - + Y Location Y-Position - + Z Location Z-Position - + Text string Textzeichenkette - + Font file name Schriftartdateiname - + Height of text Höhe des Textes - + Inter-character spacing Zwischenzeichenabstand - + Linked faces Verknüpfte Flächen - + Specifies if splitter lines must be removed Gibt an, ob Trennerlinien entfernt werden sollen - + An optional extrusion value to be applied to all faces Ein optionaler Extrusionswert der auf alle Flächen angewendet wird - + Height of the rectangle Höhe des Rechtecks - + Horizontal subdivisions of this rectangle Horizontale Unterteilungen dieses Rechtecks - + Vertical subdivisions of this rectangle Vertikale Unterteilungen dieses Rechtecks - + The placement of this object Die Platzierung dieses Objekts - + The display length of this section plane Die Anzeigelänge dieser Sektionsebene - + The size of the arrows of this section plane Die Größe der Pfeile dieser Sektionsebene - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Für Schnittlinien- und Schnittflächenmodi, dies belässt die Flächen an der Schnittposition - + The base object is the wire, it's formed from 2 objects Das Basisobjekt ist der Draht, es wird aus 2 Objekten gebildet - + The tool object is the wire, it's formed from 2 objects Das Werkzeugobjekt ist der Draht, es wird aus 2 Objekten gebildet - + The length of the straight segment Die Länge des Geradensegments - + The point indicated by this label Der von dieser Beschriftung bezeichnete Punkt - + The points defining the label polyline Die Punkte welche die Polylinie der Beschriftung definieren - + The direction of the straight segment Die Richtung des Geradensegments - + The type of information shown by this label Die Art der Informationen, die von dieser Beschriftung angezeigt wird - + The target object of this label Das Zielobjekt für diese Beschriftung - + The text to display when type is set to custom Der anzuzeigende Text, wenn Typ auf benutzerdefiniert festgelegt ist - + The text displayed by this label Der von dieser Beschriftung angezeigte Text - + The size of the text Die Größe des Textes - + The font of the text Die Schriftart des Textes - + The size of the arrow Die Größe des Pfeils - + The vertical alignment of the text Die vertikale Ausrichtung des Textes - + The type of arrow of this label Der Pfeiltyp für diese Beschriftung - + The type of frame around the text of this object Die Art des Rahmens um den Text dieses Objekts - + Text color Textfarbe - + The maximum number of characters on each line of the text box Die maximale Anzahl von Zeichen pro Zeile im Textfeld - + The distance the dimension line is extended past the extension lines Länge, um die die Maßlinie über die Hilfslinien hinaus verlängert wird - + Length of the extension line above the dimension line Länge, um die die Hilfslinie über die Maßlinie hinaus verlängert wird - + The points of the B-spline Die Punkte der B-Spline - + If the B-spline is closed or not Ob die B-Spline geschlossen ist oder nicht - + Tessellate Ellipses and B-splines into line segments Tesselliert Ellipsen und B-Splines in Liniensegmente - + Length of line segments if tessellating Ellipses or B-splines into line segments Länge der Liniensegmente, wenn man Ellipsen oder B-Splines in Liniensegmente tesselliert - + If this is True, this object will be recomputed only if it is visible Falls wahr, wird das Objekt nur neu berechnet, wenn es sichtbar ist - + Base Basis - + PointList Punkteliste - + Count Anzahl - + The objects included in this clone In diesem Klon enthaltene Objekte - + The scale factor of this clone Der Skalierungsfaktor dieses Klons - + If this clones several objects, this specifies if the result is a fusion or a compound Wenn mehrere Objekte geklont werden, gibt dies an, ob das Ergebnis eine Fusion oder ein Verbund ist - + This specifies if the shapes sew Dies gibt an, ob Formen vernäht sind - + Display a leader line or not Führungslinie anzeigen oder verstecken - + The text displayed by this object Der Text, der von diesem Objekt angezeigt wird - + Line spacing (relative to font size) Zeilenabstand (relativ zur Schriftgröße) - + The area of this object - The area of this object + Der Bereich dieses Objekts - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Zeigt ein Größen-Symbol am Ende des Drahtes an - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Wand- und Strukturobjekte von gleicher Art und Material vereinigen + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Neigung - + Scale Skalieren - + Writing camera position Kameraposition schreiben - + Writing objects shown/hidden state Schreibe sichtbare Objekte/ausgeblendeter Zustand - + X factor X-Faktor - + Y factor Y-Faktor - + Z factor Z-Faktor - + Uniform scaling Einheitliche Skalierung - + Working plane orientation Orientierung der Arbeitsebene @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager Der Download der DXF-Bibliotheken ist fehlgeschlagen. Bitte installieren Sie das - dxf Library Addon - manuell über das Menü Extras -> Addon Manager - + This Wire is already flat Der Kantenzug ist bereits flach - + Pick from/to points Wähle von/zu Punkte - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Neigung der ausgewählten Drähte/Linien: 0 = horizontal, 1 = 45deg hoch, -1 = 45deg runter + + + Create a clone + Klon erzeugen + DraftShapeStringGui @@ -844,28 +884,28 @@ from menu Tools -> Addon Manager Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Koordinaten eingeben oder Punks mit Maus auswählen. Reset 3d point selection - Reset 3d point selection + 3d-Punktauswahl zurücksetzen Reset Point - Reset Point + Punkt zurücksetzen Draft_AddConstruction - + Add to Construction group Zur Konstruktionsgruppe hinzufügen - + Adds the selected objects to the Construction group Die ausgewählten Objekte werden zur Konstruktionsgruppe hinzugefügt @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Punkt hinzufügen - + Adds a point to an existing Wire or B-spline Fügt einen Punkt zu einer vorhandenen Linie oder B-Spline hinzu @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... In Gruppe verschieben... - + Moves the selected object(s) to an existing group Verschiebt das\die ausgewählte(n) Objekt(e) in eine bestehende Gruppe @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Aktuellen Style anwenden - + Applies current line width and color to selected objects Aktuelle Linienbreite und Farbe auf ausgewählte Objekte anwenden @@ -912,46 +952,46 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Kreisbogen - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Erstellt einen Bogen aus Mittelpunkt und Radius. STRG zum Fangen, SHIFT zum Festlegen Draft_ArcTools - + Arc tools - Arc tools + Bogenwerkzeuge Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Bogen aus 3 Punkten - + Creates an arc by 3 points - Creates an arc by 3 points + Erstellt einen Bogen aus 3 Punkten Draft_Array - + Array Array - + Creates a polar or rectangular array from a selected object Erstellt eine polare oder rechteckige Anordnung des ausgewählten Objekts @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGruppe - + Select a group to automatically add all Draft & Arch objects to Wählen Sie eine Gruppe aus, um automatisch alle Draft- und Arch-Objekte hinzuzufügen @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-Spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Erstellt einen B-Spline mit mehreren Punkten. STRG zum Einrasten, UMSCHALTEN zum Einschränken @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Erstellt eine Bézierkurve. STRG zum Einrasten, SHIFT zum Beschränken @@ -998,20 +1038,20 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + Bézierwerkzeuge Draft_Circle - + Circle Kreis - + Creates a circle. CTRL to snap, ALT to select tangent objects Erzeugt einen Kreis. STRG zum Einrasten, ALT um berührende Objekte auszuwählen @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Klonen - + Clones the selected object(s) Ausgewählte Objekte klonen @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Linie schließen - + Closes the line being drawn Schließt die gezeichnete Linie @@ -1045,27 +1085,27 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + Kubische Bézierkurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Erstellt eine kubische Bézierkurve +Kicken und ziehe, um Steuerpunkte zu setzten. STRG zum Fangen, SHIFT zum Festlegen Draft_DelPoint - + Remove Point Punkt entfernen - + Removes a point from an existing Wire or B-spline Entfernt einen Punkt aus einer vorhandenen Linie oder B-Spline @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Abmessung - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Erstellt eine Dimension. CTRL zum Einrasten, SHIFT zum Beschränken, ALT um ein Segment auszuwählen @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Herabstufen - + Explodes the selected objects into simpler objects, or subtracts faces Teilt die ausgewählten Objekte in einfachere Objekte oder entfernt Oberflächen @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Entwurf zu Skizze - + Convert bidirectionally between Draft and Sketch objects Bidirektional zwischen Draft und Sketch konvertieren @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Zeichnung - + Puts the selected objects on a Drawing sheet Fügt die ausgewählten Objekte auf einem Zeichenblatt ein @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Bearbeiten - + Edits the active object Bearbeitet das aktive Objekt @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Bearbeiten verbessert - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Bearbeitet das ausgewählte Objekt Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Erstellt eine Ellipse. STRG zum Einrasten @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Flächengruppe - + Creates a facebinder object from selected face(s) Erzeugt eine Flächengruppe aus den ausgewählten Flächen @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Linie beenden - + Finishes a line without closing it Beendet eine Linie, ohne sie zu schließen @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Bemaßung umkehren - + Flip the normal direction of a dimension Die normale Richtung der Bemaßung umkehren @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Heilen - + Heal faulty Draft objects saved from an earlier FreeCAD version Stelle fehlerhafte Zeichnungsobjekte aus älteren FreeCAD Versionen wieder her @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Verbinden - + Joins two wires together Verbindet zwei Drähte miteinander @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Bezeichnung - + Creates a label, optionally attached to a selected object or element Erzeugt Beschriftung, optional an ausgewähltes Objekt oder Element angehängt + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linie - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Erzeugt Linie aus 2 Punkten. STRG zum Einrasten, SHIFT zum Beschränken @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Spiegeln - + Mirrors the selected objects along a line defined by two points Spiegelt die ausgewählten Objekte entlang einer Linie, die durch zwei Punkte definiert wird @@ -1273,25 +1321,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Verschieben - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Bewegt das ausgewählte Objekt zwischen 2 Punkten. STRG zum fangen, SHIFT zum festlegen Draft_Offset - + Offset Versetzen - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Versetzt das aktive Objekt, STRG zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PfadDatenfeld - + Creates copies of a selected object along a selected path. Erstellt Kopien eines ausgewählten Objekts entlang eines ausgewählten Pfades. @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punkt - + Creates a point object Erzeugt ein Punkt-Objekt @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Punkte Array - + Creates copies of a selected object on the position of points. Erstellt Kopien eines ausgewählten Objekts an der Position von Punkten. @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Erstellt ein regelmäßiges Polygon. STRG = anfassen, SHIFT = einschränken @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rechteck - + Creates a 2-point rectangle. CTRL to snap Erstellt eine 2-Punkt-Rechteck. Einrasten mit STRG @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Drehen - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Dreht die ausgewählten Objekte. STRG zum Einrasten, SHIFT zum Beschränken, ALT erstellt eine Kopie @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skalieren - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skaliert die markierten Objekte von einem Basispunkt. STRG zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Wähle Gruppe - + Selects all objects with the same parents as this group Wählt alle Objekte mit den selben Eltern wie diese Gruppe @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Ebene markieren - + Select a working plane for geometry creation Markieren Sie eine Bearbeitungsebene für die Geometrieerstellung @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Erstellt ein Proxy-Objekt aus der aktuellen Arbeitsebene - + Create Working Plane Proxy Arbeitsebenen Proxy erstellen @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Form in 2D Ansicht - + Creates Shape 2D views of selected objects Erzeugt 2D Ansichten von ausgewählten Objekten @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Form von Text... - + Creates text string in shapes. Erzeugt aus Text eine Form. @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Zeige Fang-Symbolleiste - + Shows Draft snap toolbar Fang Werkzeugleiste einblenden @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Neigung festlegen - + Sets the slope of a selected Line or Wire Legt die Neigung einer ausgewählten Linie oder Drahtes fest @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Winkel - + Snaps to 45 and 90 degrees points on arcs and circles Rastet auf 45- und 90 Grad-Punkten auf Bögen und Kreise ein @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Mittelpunkt - + Snaps to center of circles and arcs Einrasten im Zentrum von Kreisen und Kreisbögen @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Bemaßungen - + Shows temporary dimensions when snapping to Arch objects Temporäre Bemaßungen beim Einrasten an Bogenobjekten anzeigen @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Endpunkt - + Snaps to endpoints of edges Einrasten an den Endpunkten der Kanten @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Verlängerung - + Snaps to extension of edges Einrasten an der Fortsetzung der Kanten @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Raster - + Snaps to grid points Einrasten an den Rasterschnittpunkten @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Schnitt - + Snaps to edges intersections Einrasten an den Schnittpunkten @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Umschalten Ein/Aus - + Activates/deactivates all snap tools at once Aktiviert/deaktiviert alle Fang-Tools auf einmal - + Lock Sperren @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Mittelpunkt - + Snaps to midpoints of edges Einrasten an den Mittelpunkten der Kanten @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Nächste - + Snaps to nearest point on edges Einrasten am nächsten Punkt von Kanten @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Senkrecht - + Snaps to orthogonal and 45 degrees directions Rastet in 45°-Winkeln und senkrecht ein @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Parallel zu Kanten einrasten @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Senkrecht - + Snaps to perpendicular points on edges Rastet an Punkten senkrecht zu Kanten ein @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Spezial - + Snaps to special locations of objects Schnappt an speziellen Stellen der Objekte ein @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Arbeitsebene - + Restricts the snapped point to the current working plane Beschränkt den Rastpunkt auf die momentane Arbeitsebene @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Teilen - + Splits a wire into two wires Teilt einen Draht in zwei Drähte @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Dehnen - + Stretches the selected objects Streckt die ausgewählten Objekte @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Erzeugt eine Anmerkung. STRG zum Einrasten @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Schaltet den Konstruktionsmodus für die nächsten Objekte um. - + Toggle Construction Mode Konstruktionsmodus umschalten @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode In den Fortsetzungsmodus umschalten - + Toggles the Continue Mode for next commands. Umschalten zum Fortsetzungsmodus für nächste Befehle @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Anzeige-Modus umschalten - + Swaps display mode of selected objects between wireframe and flatlines Wechselt den Anzeigemodus der ausgewählten Objekte zwischen Drahtmodell und flatlines @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Raster umschalten - + Toggles the Draft grid on/off Entwurfsraster ein-/ausschalten - + Grid Raster - + Toggles the Draft grid On/Off Entwurfsraster ein-/ausschalten @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Beschneidet oder erweitert das ausgewählte Objekt oder extrudiert einzelne Oberflächen. STRG fängt, SHIFT legt den derzeitigen Abschnitt als normal fest, ALT invertiert @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Letztes Segment rückgängig machen - + Undoes the last drawn segment of the line being drawn Letztes Segment rückgängig machen @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Hochstufen - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Verbindet die ausgewählten Objekte zu einem Objekt, oder konvertiert geschlossene Drähte in gefüllte Flächen oder vereinigt Flächen - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Fügt eine VisGroup hinzu - - Draft_Wire - - DWire - Polygonzug + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Erstellt einen Polygonzug (DWire). STRG zum Fangen, SHIFT zum Einschränken + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Draht zu B-Spline - + Converts between Wire and B-spline Konvertiert einen Draht in eine B-Spline @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Generelle Entwurfs-Einstellungen - + This is the default color for objects being drawn while in construction mode. Dies ist die Standardfarbe für Objekte, die im Konstruktionsmodus gezeichnet werden. - + This is the default group name for construction geometry Dies ist der Standard-Gruppenname für die Hilfsgeometrie - + Construction Konstruktion @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSpeichern der aktuellen Farbe und Linienbreite in allen Sitzungen - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Wenn dieses Kontrollkästchen aktiviert ist, wird der Kopiermodus über den Befehl hinaus gehalten, sonst beginnen Befehle immer im Nicht-Kopiermodus - + Global copy mode Globaler Kopiermodus - + Default working plane Standard-Arbeitssebene - + None Kein - + XY (Top) XY (oben) - + XZ (Front) XZ (vorne) - + YZ (Side) YZ (Seite) @@ -1983,12 +2018,12 @@ such as "Arial:Bold" Allgemeine Einstellungen - + Construction group name Konstruktionsgruppenname - + Tolerance Toleranz @@ -2013,22 +2048,22 @@ such as "Arial:Bold" Hier können Sie ein Verzeichnis angeben, das SVG-Dateien mit <pattern>-Definitionen enthält. Diese werden zu den Standard-Entwurfs-Schraffierungsmustern hinzugefügt - + Draft interface mode Schnittstellen Modus - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Dies ist der UI-Modus in dem das Zeichenmodul arbeiten wird: Der Werkzeugleistenmodus wird alle Zeichnungseinstellungen in einer separaten Werkzeugleiste plazieren,während der Aufgabenleistemodus das FreeCAD Aufgabenübersichts-System für jegliche Benutzerinteraktion nutzen wird - + Toolbar Werkzeugleiste - + Taskview Aufgabenüberblick @@ -2058,12 +2093,12 @@ such as "Arial:Bold" Alternativer Modus - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalerweise wird nach dem Kopieren von Objekten die Kopie ausgewählt. Mit dieser Option werden stattdessen die ursprünglichen Objekte ausgewählt. - + Select base objects after copying Wähle ursprüngliche Objekte nach dem Kopieren aus @@ -2098,7 +2133,7 @@ such as "Arial:Bold" Hauptlinien werden dicker gezeichnet. Legen Sie hier fest, wie viele Kästchen zwischen den Hauptlinien sein sollen. - + Internal precision level Interner Präzisionsgrad @@ -2213,12 +2248,12 @@ such as "Arial:Bold" Weiße Linienfarbe in schwarze umwandeln - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Wenn diese Option aktiviert ist, erstellt das Entwurfs-Tool falls verfügbar Grundkörper anstelle von Draft-Objekten. - + Use Part Primitives when available Benutze Grundkörper falls möglich @@ -2238,12 +2273,7 @@ such as "Arial:Bold" Rastmodus ständig aktiviert (deaktiviert den Rastmodus-Umschalter) - - Construction geometry - Konstruktionsgeometrie - - - + Construction geometry color Hilfsgeometrie-Farbe @@ -2383,7 +2413,7 @@ such as "Arial:Bold" Wählen Sie eine Schriftartdatei aus - + Fill objects with faces whenever possible Falls möglich, zeige Objekte mit Flächen an @@ -2674,7 +2704,7 @@ Eine Einheit in der SVG-Datei wird als 1 Millimeter interpretiert. Automatisches Update (nur für älteren Import) - + Prefix labels of Clones with: Präfix-Beschriftungen von Klonen mit: @@ -2713,7 +2743,7 @@ Beispiel: für Dateien in Millimeter: 1, in Zentimeter: 10, in Metern: 1000, in Dies ist die Methode, die für den Import von SVG-Objektfarben in FreeCAD gewählt wurde. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Wenn diese Option aktiviert ist, werden Objekte standardmäßig als gefüllt angezeigt. Andernfalls werden sie als Drahtmodell angezeigt @@ -2793,17 +2823,7 @@ Beispiel: für Dateien in Millimeter: 1, in Zentimeter: 10, in Metern: 1000, in Wenn diese Option aktiviert ist, werden Objekte der gleichen Ebene mit einander in einem Zeichnungsblock verbunden, sodass die Ansicht schneller gedreht, aber die Bearbeitung wird schwieriger - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Wenn diese Option aktiviert ist, werden beim Ausführen von Draft Befehlen Schritt-für-Schritt-Anweisungen im Ausgabefenster angezeigt - - - - Verbose command line mode - Ausführlicher Befehlszeilenmodus - - - + When drawing lines, set focus on Length instead of X coordinate Beim Zeichnen von Linien den Fokus auf die Länge anstelle X-Koordinaten setzen @@ -2883,710 +2903,857 @@ Beispiel: für Dateien in Millimeter: 1, in Zentimeter: 10, in Metern: 1000, in Max. Länge eines Spline Segments: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Die Anzahl der Dezimalstellen in internen Koordinaten-Operationen (für z. B. 3 = 0,001). Werte zwischen 6 und 8 gelten unter FreeCAD-Nutzern als guter Kompromiss. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Dieser Wert wird von Funktionen verwendet, die mit Toleranzen arbeiten. +Werte, die weniger unterscheiden, als dieser Wert, werden als gleich angenommen und behandelt. Dieser wert wird bald obsolet sein und die Genauigkeit wird für beides verwendet werden. Use legacy python exporter - Use legacy python exporter + Verwende den alten Python-Export + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Konstruktionsgeometrie + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativ + + + + R + R + + + + Continue + Fortsetzen + + + + T + T + + + + Close + Schließen + + + + O + O + + + + Copy + Kopieren + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Füllen + + + + L + L + + + + Exit + Verlassen + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Länge + + + + H + H + + + + Wipe + Radieren + + + + W + W + + + + Set WP + Arbeitsebene festlegen + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Beschränke X + + + + X + X + + + + Restrict Y + Beschränke Y + + + + Y + Y + + + + Restrict Z + Beschränke Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Entwurfs-Einrastung - - - Draft creation tools - Werkzeuge zur Erstellung von Entwürfen - - - - Draft modification tools - Werkzeuge zur Bearbeitung von Entwürfen - - - - Utilities - Dienstprogramme - - - - Wire tools - Drahtwerkzeuge - - - - Snapping - Objektfang - draft - + not shape found form nicht gefunden - + All Shapes must be co-planar Alle Formen müssen co-planar sein - + The given object is not planar and cannot be converted into a sketch. Das angegebene Objekt ist nicht planar und kann nicht in eine Skizze umgewandelt werden. - + Unable to guess the normal direction of this object Die normalen Richtung dieses Objekts kann nicht erraten werden - + Draft Command Bar Entwurfsbefehlsleiste - + Toggle construction mode Konstruktionsmodus umschalten - + Current line color Aktuelle Linienfarbe - + Current face color Derzeitige Face Farbe - + Current line width Aktuelle Linienbreite - + Current font size Aktuelle Schriftgröße - + Apply to selected objects Auf selektierte Objekte anwenden - + Autogroup off Autogruppe aus - + active command: aktiver Befehl: - + None Kein - + Active Draft command Aktiver Draft-Befehl - + X coordinate of next point X-Koordinate des nächsten Punktes - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-Koordinate des nächsten Punktes - + Z coordinate of next point Z-Koordinate des nächsten Punktes - + Enter point Punkt eingeben - + Enter a new point with the given coordinates Einen neuen Punkt mit gegebenen Koordinaten eingeben - + Length Länge - + Angle Winkel - + Length of current segment Länge des aktuellen Abschnitts - + Angle of current segment Winkel des aktuellen Abschnittes - + Radius Radius - + Radius of Circle Kreisradius - + If checked, command will not finish until you press the command button again Falls aktiviert, wird Befehl nicht beendet bis Sie den Befehlsknopf nochmals drüchen - + If checked, an OCC-style offset will be performed instead of the classic offset Verwende OCC Versatz statt klassischem Versatz - + &OCC-style offset OCC Versatz - + Add points to the current object Punkte zu momentanem Objekt hinzufügen - + Remove points from the current object Punkte von momentanem Objekt entfernen - + Make Bezier node sharp Mache Bezier Knoten zu Eckknoten - + Make Bezier node tangent Mache Bezier Knoten tangential - + Make Bezier node symmetric Mache Bezier Knoten symmetrisch - + Sides Seiten - + Number of sides Anzahl der Seiten - + Offset Versetzen - + XY (top) XY (oben) - - Select XY plane - XY-Ebene auswählen - - - + XZ (front) XZ (vorne) - - Select XZ plane - XY-Ebene auswählen - - - + YZ (side) YZ (Seite) - - Select YZ plane - YZ-Ebene wählen - - - + View Ansicht - - Select plane perpendicular to the current view - Wählen Sie eine Ebene senkrecht zur momentanen Blickrichtung aus - - - + Auto Automatisch - - Do not project points to a drawing plane - Punkt nicht auf Zeichenebene projizieren - - - + Text string to draw Zu zeichnende Textzeichenkette - + String Zeichenkette - + Height of text Höhe des Textes - + Height Höhe - + Intercharacter spacing Zeichenabstand - + Tracking Verfolgung - + Full path to font file: Vollständiger Pfad zur Schriftdatei: - + Open a FileChooser for font file Schriftartendatei auswählen - + Grid spacing Rasterabstand - + The spacing between the grid lines Der Abstand zwischen den Rasterlinien - + Main line every Hauptlinie alle - + The number of lines between main lines Die Anzahl der Zeilen zwischen den Hauptlinien - + Center plane on view Ebene in Ansicht zentrieren - - Select Plane - Ebene auswählen - - - + Line Linie - + DWire Polygonzug - + Circle Kreis - + Center X Mittelpunkt X - + Arc Kreisbogen - + Point Punkt - + Label Bezeichnung - + Distance Abstand - + Trim Beschneiden - + Pick Object Objekt wählen - + Edit Bearbeiten - + Global X Globales X - + Global Y Globales Y - + Global Z Globales Z - + Local X Lokales X - + Local Y Lokales Y - + Local Z Lokales Z - + Invalid Size value. Using 200.0. Ungültiger Größenwert. 200,0 wird verwendet. - + Invalid Tracking value. Using 0. Ungültiger Wert für Laufweite. Verwende stattdessen 0. - + Please enter a text string. Bitte geben Sie eine Textzeichenkette ein. - + Select a Font file Wählen Sie eine Schriftartdatei aus - + Please enter a font file. Bitte geben Sie eine Schriftdatei an. - + Autogroup: Autogruppe: - + Faces Flächen - + Remove Entfernen - + Add Hinzufügen - + Facebinder elements Flächen-Verbund-Elemente - + Create Line Linie erstellen - - Pick next point: - - Nächsten Punkt auswählen: - - - + Convert to Wire Umwandlung in Draht - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Erstelle BezCurve - + Rectangle Rechteck - + Create Plane Ebene erstellen - + Create Rectangle Rechteck erstellen - + Create Circle Kreis erstellen - + Create Arc Bogen erstellen - + Start Angle Startwinkel - + Aperture Öffnungswinkel - + Polygon Polygon - + Create Polygon Polygon erstellen - + Ellipse Ellipse - + Create Ellipse Ellipse erstellen - + Text Text - + Create Text Text erstellen - + Dimension Abmessung - + Create Dimension Bemaßung erstellen - + ShapeString Textform - + Create ShapeString Textform erstellen - + Copy Kopieren - + Move Verschieben - + Change Style Stil Ändern - + Rotate Drehen - - Cannot offset this object type - - Dieser Objekttyp kann nicht versetzt werden - - - - + Stretch Dehnen - + Upgrade Hochstufen - + Downgrade Herabstufen - + Selection is not a Knot Auswahl ist kein Knoten - + Convert to Sketch In eine Skizze umwandeln - + Convert to Draft In einen Entwurf umwandeln - + Convert Umwandeln - + Array Array - + Create Point Punkt erstellen - + Mirror Spiegeln - + &Draft &Entwurf @@ -3608,179 +3775,179 @@ oder laden Sie diese Bibliotheken manuell herunter, wie unter folgendem Link erk Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken zu gestatten. - + Draft.makeBSpline: not enough points Draft.makeBSpline: nicht genügend Punkte - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Identische Start und Endpunkte gefunden, erzwinge geschlossene Kurve - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Ungültige Punkteliste - + No object given Kein Objekt vorhanden - + The two points are coincident Die beiden Punkte sind gleich - + Found groups: closing each open object inside Gefundene Gruppen: jedes offene Objekt wird geschlossen - + Found mesh(es): turning into Part shapes Objekt-Netze gefunden: werden in Grundkörper-Formen transferiert - + Found 1 solidifiable object: solidifying it 1 Objekt zum Verwandeln in Solid gefunden. Wird verwandelt - + Found 2 objects: fusing them 2 Objekte gefunden: Werden verschmolzen - + Found several objects: creating a shell Mehrere Objekte gefunden: Erstellung einer Shell - + Found several coplanar objects or faces: creating one face Mehrere koplanare Objekte oder Flächen gefunden: Erstelle Fläche - + Found 1 non-parametric objects: draftifying it 1 nicht parametrisches Objekt gefunden: Erzeuge ein parametrisches Objekt - + Found 1 closed sketch object: creating a face from it 1 geschlossenes Skizzen-Objekt gefunden: Erstelle daraus eine Fläche - + Found 1 linear object: converting to line 1 lineares Objekt gefunden: Konvertiere zu einer Linie - + Found closed wires: creating faces Geschlossene Drahtlinien gefunden: Erstelle Fläche(n) - + Found 1 open wire: closing it 1 offener Kantenzug gefunden: Wird geschlossen - + Found several open wires: joining them Mehrere ungeschlossene Drähte gefunden: Verbinde sie - + Found several edges: wiring them Mehrere Kanten gefunden: Verbinde sie - + Found several non-treatable objects: creating compound Mehrere nicht behandelbare Objekte gefunden: Erstellen eines Verbundes - + Unable to upgrade these objects. Diese Objekte konnten nicht Aufgerüstet werden. - + Found 1 block: exploding it Ein Block gefunden: zerlege ihn - + Found 1 multi-solids compound: exploding it Ein Verbund mehrerer Solids gefunden: wird zerlegt - + Found 1 parametric object: breaking its dependencies 1 parametrisches Objekt gefunden: Entferne seine Abhängigkeiten - + Found 2 objects: subtracting them 2 Objekte gefunden: Werden subtrahiert - + Found several faces: splitting them Mehrere Flächen gefunden: Werden getrennt - + Found several objects: subtracting them from the first one Mehrere Objekte gefunden: Subtrahiere sie vom ersten Objekt - + Found 1 face: extracting its wires 1 Fläche gefunden: Extrahiere die Kanten - + Found only wires: extracting their edges Nur Kantenzug gefunden: Extrahiere einzelne Kanten - + No more downgrade possible Kein weiteres Downgrade möglich - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Geschlossene Kurve mit identischem Start- und Endpunkt gefunden. Geometrie wurde nicht aktualisiert. - + No point found Kein Punkt gefunden - + ShapeString: string has no wires ShapeString: Die Zeichenfolge hat keine Linien - + Relative Relativ - + Continue Fortsetzen - + Close Schließen @@ -3825,7 +3992,7 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Beschränke Z - + Select edge Kante auswählen @@ -3840,7 +4007,7 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Längenmodus - + Wipe Radieren @@ -3855,513 +4022,636 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Kreis-Einrast-Objekt - + Check this to lock the current angle Aktivieren, um den aktuellen Winkel zu sperren - + Coordinates relative to last point or absolute Koordinaten relativ oder absolut zum letzten Punkt - + Filled Befüllt - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Aktivieren falls das Objekt gefüllt erscheinen soll, sonst erscheint es als Drahtgitter - - - + Finish Fertig - + Finishes the current drawing or editing operation Beendet die aktuelle Zeichen- oder Bearbeitungsoperation - + &Undo (CTRL+Z) Rückgängig (Strg+Z) - + Undo the last segment Letztes Segment rückgängig machen - + Finishes and closes the current line Beendet und schliesst die aktuelle Linie - + Wipes the existing segments of this line and starts again from the last point Löscht vorhandene Segmente dieser Linie und beginnt nochmals vom letzten Punkt - + Set WP Arbeitsebene festlegen - + Reorients the working plane on the last segment Orientiert die Arbeitsebene an dem letzten Segment neu - + Selects an existing edge to be measured by this dimension Wählt eine vorhandene Kante aus, die durch diese Bemaßung beschrieben wird - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Falls Aktiviert, werden Objekte kopiert anstatt verschoben. Einstellungen -> Draft -> Globaler Kopiermodus, um diesen Modus in den nächsten Befehlen beizubehalten - - options - Einstellungen - - - + Default Standard - + Pick a face to define the drawing plane Wähle eine Fläche um die Zeichenfläche zu definieren - - First point: - Startpunkt: - - - - Closing - Schliesse - - - + Create Wire Erzeuge Kante - - Removing last point - Entferne letzten Punkt - - - - Next point: - Nächster Punkt: - - - - Restarting from - Neustarten von - - - + Unable to create a Wire from selected objects Es kann keine Kante von den ausgewählten Objekten erstellt werden - + Spline has been closed Polygonzug wurde geschlossen - + Last point has been removed Der letzte Punkt wurde entfernt - - Pick next point, or Finish (shift-F) or close (o): - Wählen Sie den nächsten Punkt, oder Beenden (Shift-F) oder Schließen (o): - - - + Create B-spline B-Spline erstellen - + Bezier curve has been closed Bézierkurve wurde geschlossen - - Pick first point: - Startpunkt wählen: - - - - Pick opposite point: - Gegenüberliegenden Punkt wählen: - - - - Pick center point: - Mittelpunkt wählen: - - - - Pick radius: - Radius wählen: - - - - Pick start angle: - Startwinkel wählen: - - - - Pick aperture: - Öffnung wählen: - - - - Aperture angle: - Öffnungswinkel: - - - - Pick location point: - Wähle Position: - - - + Edges don't intersect! Kanten schneiden sich nicht! - + Pick ShapeString location point: Position für Textform wählen: - + Select an object to move Wähle ein Objekt zum Verschieben aus - - Pick start point: - Startpunkt wählen: - - - - Pick end point: - Endpunkt wählen: - - - + Select an object to rotate Wähle ein Objekt zum Drehen aus - - Pick rotation center: - Wähle das Drehzentrum: - - - - Pick base angle: - Wähle den Basiswinkel: - - - - Pick rotation angle: - Wähle den Drehwinkel: - - - + Select an object to offset Wähle ein Objekt zum Versetzen - + Offset only works on one object at a time Versetzen unterstützt nur ein Objekt - + Sorry, offset of Bezier curves is currently still not supported Tut mir leid, der Versatz von Bezier-Kurven wird derzeit noch nicht unterstützt - - Pick distance: - Wähle Distanz: - - - + Select an object to stretch Wähle ein zu streckendes Objekt aus - - Pick first point of selection rectangle: - Wähle den ersten Punkt der Rechteck Auswahl: - - - - Pick opposite point of selection rectangle: - Wähle den gegenüberliegenden Punkt der Rechteck Auswahl: - - - - Pick start point of displacement: - Wähle den Startpunkt der Verschiebung: - - - - Pick end point of displacement: - Wähle den Endpunkt der Verschiebung: - - - + Turning one Rectangle into a Wire Verwandle ein Rechteck in Kantenzug - + Select an object to join Wähle ein Objekt zum Verbinden aus - + Join Verbinden - + Select an object to split Wähle ein zu teilendes Objekt aus - + Select an object to upgrade Wähle ein Objekt für die Aufrüstung - + Select object(s) to trim/extend Wähle Objekt(e) zum verkürzen/verlängern - + Unable to trim these objects, only Draft wires and arcs are supported Objekte könne nicht beschnitten werden, nur Draft Linien und Kreise werden unterstützt - + Unable to trim these objects, too many wires Objekte könne nicht beschnitten werden, zu viele Linien - + These objects don't intersect Diese Objekte überschneiden sich nicht - + Too many intersection points Zu viele Schnittpunkte - + Select an object to scale Wähle ein Objekt zum Skalieren aus - - Pick base point: - Basispunkt wählen: - - - - Pick reference distance from base point: - Wähle Referenzdistanz vom Basispunkt: - - - - Pick new distance from base point: - Wähle neue Distanz vom Basispunkt: - - - + Select an object to project Wähle ein zu projizierendes Objekt aus - - This object type is not editable - Dieser Objekttyp ist nicht editierbar - - - + Please select only one object Bitte wähle nur ein Objekt - + Select a Draft object to edit Wähle ein Entwurf Objekt zur Bearbeitung aus - + Active object must have more than two points/nodes Aktives Objekt muss mehr als zwei Punkte / Knoten haben - + Endpoint of BezCurve can't be smoothed Endpunkte einer Bézierkurve können nicht geglättet werden - + Select an object to convert Ein Objekt zum Konvertieren auswählen - + Select an object to array Wähle ein Objekt für die Anordnung - + Please select base and path objects Bitte wähle Basis- und Pfadobjekte - + Please select base and pointlist objects Bitte wähle Basis und Punktelisten Objekte - + Select an object to clone Wähle ein Objekt zum Klonen aus - + Select face(s) on existing object(s) Wähle eine oder mehrere Flächen auf existierenden Objekten aus - + Select an object to mirror Wähle ein Objekt zum Spiegeln - - Pick start point of mirror line: - Wähle den Start-Punkt der Spiegel-Linie: - - - - Pick end point of mirror line: - Wähle den End-Punkt der Spiegel-Linie: - - - + This tool only works with Wires and Lines Dieses Werkzeug funktioniert nur mit Drähten und Linien - - - Pick target point: - Zielpunkt auswählen: - - - - Pick endpoint of leader line: - Wähle den End-Punkt der Führungslinie: - - - - Pick text position: - Textposition festlegen: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (früher Teigha) Dateikonverter wurde nicht gefunden, DWG-Unterstützung ist deaktiviert - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s teilt eine Basis mit %d anderen Objekten. Bitte überprüfen Sie, ob Sie dies ändern möchten. Subelement mode - Subelement mode + Subelement-Modus - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Zwischen Radius und Winkel-Bearbeitung umschalten - + Modify subelements - Modify subelements + Subelemente ändern - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Wenn aktiviert, werden Subelemente anstatt ganzer Objekte geändert - + CubicBezCurve - CubicBezCurve + Kubische Bézierkurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Einige Subelemente konnten nicht verschoben werden. - + Scale Skalieren - + Some subelements could not be scaled. - Some subelements could not be scaled. + Einige Subelemente konnten nicht skaliert werden. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + Wand-Basisskizze ist zu komplex um zu bearbeiten: Es wird vorgeschlagen, direkt die Skizze zu bearbeiten + + + + Top + Oben + + + + Front + Vorne + + + + Side + Seite + + + + Current working plane + Aktuelle Arbeitsebene + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatisch + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Drehung + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Wähle ein Objekt zum Bearbeiten aus + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Tiefgang + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Dienstprogramme + + + + Wire tools + Drahtwerkzeuge + + + + Snapping + Objektfang diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 3ee6767585..8b0c8b79ce 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index cfcb150508..c70b4ad165 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Καθορίζει ένα μοτίβο διαγράμμισης επιφάνειας - + Sets the size of the pattern Ορίζει το μέγεθος του μοτίβου - + Startpoint of dimension Σημείο εκκίνησης της διάστασης - + Endpoint of dimension Τελικό σημείο διάστασης - + Point through which the dimension line passes Σημείο μέσω του οποίου περνάει η γραμμή διάστασης - + The object measured by this dimension Το αντικείμενο που μετριέται από αυτήν την διάσταση - + The geometry this dimension is linked to Η γεωμετρία στην οποία συνδέεται αυτή η διάσταση - + The measurement of this dimension Η μέτρηση αυτής της διάστασης - + For arc/circle measurements, false = radius, true = diameter Για μετρήσεις τόξου/κύκλου, ψευδές = ακτίνα, αληθές = διάμετρος - + Font size Μέγεθος γραμματοσειράς - + The number of decimals to show Ο αριθμός των δεκαδικών προς εμφάνιση - + Arrow size Μέγεθος βέλους - + The spacing between the text and the dimension line Η απόσταση μεταξύ του κειμένου και της γραμμής διάστασης - + Arrow type Τύπος βέλους - + Font name Όνομα γραμματοσειράς - + Line width Πλάτος γραμμής - + Line color Χρώμα γραμμής - + Length of the extension lines Μήκος των γραμμών επέκτασης - + Rotate the dimension arrows 180 degrees Περιστρέψτε τα βέλη διάστασης κατά 180 μοίρες - + Rotate the dimension text 180 degrees Περιστρέψτε το κείμενο διάστασης κατά 180 μοίρες - + Show the unit suffix Εμφανίστε την κατάληξη μονάδας - + The position of the text. Leave (0,0,0) for automatic position Η θέση του κειμένου. Κρατήστε το (0,0,0) για αυτόματη τοποθέτηση - + Text override. Use $dim to insert the dimension length Αντικατάσταση κειμένου. Χρησιμοποιήστε $dim για να εισαγάγετε το μήκος διάστασης - + A unit to express the measurement. Leave blank for system default Μια μονάδα για να εκφράσετε τη μέτρηση. Αφήστε το κενό για προεπιλογή συστήματος - + Start angle of the dimension Γωνία εκκίνησης της διάστασης - + End angle of the dimension Τελική γωνία της διάστασης - + The center point of this dimension Το κεντρικό σημείο αυτής της διάστασης - + The normal direction of this dimension Η κανονική κατεύθυνση αυτής της διάστασης - + Text override. Use 'dim' to insert the dimension length Αντικατάσταση κειμένου. Χρησιμοποιήστε 'dim' για να εισαγάγετε το μήκος διάστασης - + Length of the rectangle Μήκος του ορθογωνίου - + Radius to use to fillet the corners Ακτίνα προς χρήση για το στρογγύλεμα των γωνιών - + Size of the chamfer to give to the corners Μέγεθος της λοξότμησης που θα δοθεί στις γωνίες - + Create a face Δημιουργήστε μια όψη - + Defines a texture image (overrides hatch patterns) Καθορίζει μια εικόνα υφής (αντικαθιστά τα μοτίβα διαγράμμισης επιφάνειας) - + Start angle of the arc Γωνία εκκίνησης του τόξου - + End angle of the arc (for a full circle, give it same value as First Angle) Τελική γωνία του τόξου (για πλήρη κύκλο, δώστε την ίδια τιμή με την Πρώτη Γωνία) - + Radius of the circle Ακτίνα του κύκλου - + The minor radius of the ellipse Η μικρή ακτίνα της έλλειψης - + The major radius of the ellipse Η μεγάλη ακτίνα της έλλειψης - + The vertices of the wire Οι κορυφές του σύρματος - + If the wire is closed or not Αν το σύρμα είναι κλειστό ή όχι - + The start point of this line Το σημείο εκκίνησης αυτής της γραμμής - + The end point of this line Το τελικό σημείο αυτής της γραμμής - + The length of this line Το μήκος αυτής της γραμμής - + Create a face if this object is closed Δημιουργήστε μια όψη αν αυτό το αντικείμενο είναι κλειστό - + The number of subdivisions of each edge Ο αριθμός των υποδιαιρέσεων κάθε ακμής - + Number of faces Αριθμός όψεων - + Radius of the control circle Ακτίνα του κύκλου ελέγχου - + How the polygon must be drawn from the control circle Πώς πρέπει να σχεδιαστεί το πολύγωνο από τον κύκλο ελέγχου - + Projection direction Κατεύθυνση προβολής - + The width of the lines inside this object Το πλάτος των γραμμών μέσα σε αυτό το αντικείμενο - + The size of the texts inside this object Το μέγεθος των κειμένων μέσα σε αυτό το αντικείμενο - + The spacing between lines of text Η απόσταση μεταξύ των γραμμών του κειμένου - + The color of the projected objects Το χρώμα των προβεβλημένων αντικειμένων - + The linked object Το συνδεδεμένο αντικείμενο - + Shape Fill Style Τύπος Μορφοποίησης Γεμίσματος Σχήματος - + Line Style Τύπος Μορφοποίησης Γραμμής - + If checked, source objects are displayed regardless of being visible in the 3D model Εάν επιλεχθούν, τα πηγαία αντικείμενα εμφανίζονται ανεξάρτητα από το αν είναι ορατά στο τρισδιάστατο μοντέλο - + Create a face if this spline is closed Δημιουργήστε μια όψη αν αυτή η καμπύλη συνάρτησης spline είναι κλειστή - + Parameterization factor Παράγοντας παραμετροποίησης - + The points of the Bezier curve Τα σημεία της καμπύλης Bezier - + The degree of the Bezier function Ο βαθμός της συνάρτησης Bezier - + Continuity Συνέχεια - + If the Bezier curve should be closed or not Αν η καμπύλη Bezier θα πρέπει να είναι κλειστή ή όχι - + Create a face if this curve is closed Δημιουργήστε μια όψη αν αυτή η καμπύλη είναι κλειστή - + The components of this block Τα στοιχεία αυτού του μπλοκ - + The base object this 2D view must represent Το αντικείμενο βάσης που θα πρέπει να απεικονίζει αυτή η δισδιάστατη προβολή - + The projection vector of this object Το διάνυσμα προβολής αυτού του αντικειμένου - + The way the viewed object must be projected Ο τρόπος κατά τον οποίο θα πρέπει να προβληθεί το απεικονιζόμενο αντικείμενο - + The indices of the faces to be projected in Individual Faces mode Οι δείκτες των όψεων που θα προβληθούν σε λειτουργία Μεμονωμένων Επιφανειών - + Show hidden lines Εμφανίστε τις κρυφές γραμμές - + The base object that must be duplicated Το αντικείμενο βάσης που πρέπει να αντιγραφεί - + The type of array to create Ο τύπος διάταξης προς δημιουργία - + The axis direction Η διεύθυνση του άξονα - + Number of copies in X direction Αριθμός αντιγράφων στην διεύθυνση Χ - + Number of copies in Y direction Αριθμός αντιγράφων στην διεύθυνση Υ - + Number of copies in Z direction Αριθμός αντιγράφων στην διεύθυνση Ζ - + Number of copies Αριθμός αντιγράφων - + Distance and orientation of intervals in X direction Απόσταση και προσανατολισμός των διαστημάτων στην διεύθυνση Χ - + Distance and orientation of intervals in Y direction Απόσταση και προσανατολισμός των διαστημάτων στην διεύθυνση Υ - + Distance and orientation of intervals in Z direction Απόσταση και προσανατολισμός των διαστημάτων στην διεύθυνση Ζ - + Distance and orientation of intervals in Axis direction Απόσταση και προσανατολισμός των διαστημάτων στην διεύθυνση του άξονα - + Center point Κεντρικό σημείο - + Angle to cover with copies Γωνία προς κάλυψη με αντίγραφα - + Specifies if copies must be fused (slower) Καθορίζει αν τα αντίγραφα θα πρέπει να συγχωνευθούν (πιο αργό) - + The path object along which to distribute objects To στοιχείο διαδρομής κατά το οποίο να διανεμηθούν αντικείμενα - + Selected subobjects (edges) of PathObj Επιλεγμένα εμφωλευμένα στοιχεία (ακμές) του στοιχείου διαδρομής - + Optional translation vector Προαιρετικό διάνυσμα μετάφρασης - + Orientation of Base along path Προσανατολισμός της βάσης κατά μήκος της διαδρομής - + X Location Θέση Χ - + Y Location Θέση Υ - + Z Location Θέση Ζ - + Text string Συμβολοσειρά κειμένου - + Font file name Όνομα αρχείου γραμματοσειράς - + Height of text Ύψος κειμένου - + Inter-character spacing Κενό μεταξύ των χαρακτήρων - + Linked faces Συνδεδεμένες όψεις - + Specifies if splitter lines must be removed Καθορίζει αν θα πρέπει να αφαιρεθούν οι διαχωριστικές γραμμές - + An optional extrusion value to be applied to all faces Μια προαιρετική τιμή επέκτασης προς εφαρμογή σε όλες τις όψεις - + Height of the rectangle Ύψος του ορθογωνίου - + Horizontal subdivisions of this rectangle Οριζόντιες υποδιαιρέσεις αυτού του ορθογωνίου - + Vertical subdivisions of this rectangle Κάθετες υποδιαιρέσεις αυτού του ορθογωνίου - + The placement of this object Η τοποθέτηση αυτού του αντικειμένου - + The display length of this section plane Το μήκος εμφάνισης αυτού του επιπέδου τομής - + The size of the arrows of this section plane Το μέγεθος των βελών αυτού του επιπέδου τομής - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Για λειτουργίες Περικοπτόμενων Γραμμών και Όψεων, αυτό αφήνει τις όψεις στην θέση περικοπής - + The base object is the wire, it's formed from 2 objects Το αντικείμενο βάσης είναι το σύρμα, έχει σχηματιστεί από 2 αντικείμενα - + The tool object is the wire, it's formed from 2 objects Το αντικείμενο-εργαλείο είναι το σύρμα, έχει σχηματιστεί από 2 αντικείμενα - + The length of the straight segment Το μήκος του ευθύγραμμου τμήματος - + The point indicated by this label Το σημείο που υποδεικνύεται από αυτήν την ετικέτα - + The points defining the label polyline Τα σημεία που ορίζουν την πολυγραμμή της ετικέτας - + The direction of the straight segment Η διεύθυνση του ευθύγραμμου τμήματος - + The type of information shown by this label O τύπος των πληροφοριών που προβάλλονται από αυτήν την ετικέτα - + The target object of this label Το αντικείμενο που περιγράφεται από αυτήν την ετικέτα - + The text to display when type is set to custom Το κείμενο προς εμφάνιση όταν ο τύπος έχει οριστεί ως προσαρμοσμένος - + The text displayed by this label Το κείμενο που εμφανίζει αυτή η ετικέτα - + The size of the text Το μέγεθος του κειμένου - + The font of the text Η γραμματοσειρά του κειμένου - + The size of the arrow Το μέγεθος του βέλους - + The vertical alignment of the text Η κατακόρυφη ευθυγράμμιση του κειμένου - + The type of arrow of this label Ο τύπος βέλους αυτής της ετικέτας - + The type of frame around the text of this object Ο τύπος πλαισίου γύρω από το κείμενο αυτού του αντικειμένου - + Text color Χρώμα κειμένου - + The maximum number of characters on each line of the text box Ο μέγιστος αριθμός χαρακτήρων για κάθε γραμμή του πλαισίου κειμένου - + The distance the dimension line is extended past the extension lines Η απόσταση κατά την οποία επεκτείνεται η γραμμή διάστασης πέρα από τις γραμμές επέκτασης - + Length of the extension line above the dimension line Μήκος της γραμμής επέκτασης που υπερβαίνει την γραμμή διάστασης - + The points of the B-spline Τα σημεία της Καμπύλης βασικής συνάρτησης B-spline - + If the B-spline is closed or not Αν η Καμπύλη βασικής συνάρτησης B-spline είναι κλειστή ή όχι - + Tessellate Ellipses and B-splines into line segments Ψηφίδωση Ελλείψεων και Καμπύλων βασικής συνάρτησης B-spline σε γραμμικά τμήματα - + Length of line segments if tessellating Ellipses or B-splines into line segments Μήκος ευθυγράμμων τμημάτων αν γίνεται ψηφίδωση Ελλείψεων ή Καμπύλων βασικής συνάρτησης B-spline σε γραμμικά τμήματα - + If this is True, this object will be recomputed only if it is visible Αν αυτό είναι Αληθές, αυτό το αντικείμενο θα επανυπολογίζεται μόνο αν είναι ορατό - + Base Βάση - + PointList PointList - + Count Αρίθμηση - + The objects included in this clone Τα αντικείμενα που περιλαμβάνονται σε αυτόν τον κλώνο - + The scale factor of this clone Ο συντελεστής κλίμακας αυτού του κλώνου - + If this clones several objects, this specifies if the result is a fusion or a compound Αν αυτό κλωνοποιεί διάφορα στοιχεία, αυτό καθορίζει αν το αποτέλεσμα είναι συγχώνευση ή σύνθετο σχήμα - + This specifies if the shapes sew Αυτό καθορίζει εάν τα σχήματα ενώνονται - + Display a leader line or not Display a leader line or not - + The text displayed by this object Το κείμενο που εμφανίζει αυτό το αντικείμενο - + Line spacing (relative to font size) Απόσταση γραμμών (σχετικά με το μέγεθος γραμματοσειράς) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Κλίση - + Scale Κλίμακα - + Writing camera position Θέση κάμερας εγγραφής - + Writing objects shown/hidden state Κατάσταση εμφάνισης/απόκρυψης αντικειμένων εγγραφής - + X factor Παράγοντας Χ - + Y factor Παράγοντας Υ - + Z factor Παράγοντας Ζ - + Uniform scaling Ενιαία κλιμακοποίηση - + Working plane orientation Προσανατολισμός επιπέδου εργασίας @@ -781,20 +816,25 @@ from menu Tools -> Addon Manager από τα Εργαλεία μενού -> Διαχειριστής Προσθηκών - + This Wire is already flat Το Σύρμα είναι ήδη επίπεδο - + Pick from/to points Διαλέξτε σημεία από και προς - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Η κλίση που θα δοθεί στα επιλεγμένα Σύρματα/Γραμμές: 0 = οριζόντια, 1 = 45μοίρες πάνω, -1 = 45μοίρες κάτω + + + Create a clone + Δημιουργήστε κλώνο + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Προσθήκη στην ομάδα Κατασκευής - + Adds the selected objects to the Construction group Προσθέτει τα επιλεγμένα αντικείμενα στην ομάδα Κατασκευής @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Προσθέστε σημείο - + Adds a point to an existing Wire or B-spline Προσθέτει ένα σημείο σε ένα υπάρχον Σύρμα ή μια υπάρχουσα Καμπύλη βασικής συνάρτησης B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Μετακίνηση σε ομάδα... - + Moves the selected object(s) to an existing group Μετακινεί το επιλεγμένο αντικείμενο(-α) σε μια υπάρχουσα ομάδα @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Εφαρμογή του Τρέχοντος Τύπου Μορφοποίησης - + Applies current line width and color to selected objects Εφαρμόζει το τρέχον πάχος και χρώμα γραμμών στα επιλεγμένα αντικείμενα @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Τόξο - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Διάταξη - + Creates a polar or rectangular array from a selected object Δημιουργεί μια πολική ή ορθογώνια διάταξη από ένα επιλεγμένο αντικείμενο @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup Αυτόματη Ομαδοποίηση - + Select a group to automatically add all Draft & Arch objects to Επιλέξτε μια ομάδα στην οποία θα προστεθούν αυτόματα όλα τα Προσχέδια & Αρχιτεκτονικά στοιχεία @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline Καμπύλη βασικής συνάρτησης B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Δημιουργεί μια καμπύλη βασικής συνάρτησης B-spline πολλαπλών σημείων. CTRL για προσκόλληση, SHIFT για περιορισμό @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Καμπύλη Bezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Δημιουργεί μια καμπύλη Bezier. CTRL για προσκόλληση, SHIFT για περιορισμό @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Κύκλος - + Creates a circle. CTRL to snap, ALT to select tangent objects Δημιουργεί έναν κύκλο. CTRL για προσκόλληση, ALT για να επιλέξετε εφαπτόμενα αντικείμενα @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Κλωνοποιήστε - + Clones the selected object(s) Κλωνοποιεί τα επιλεγμένα αντικείμενα @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Κλείστε Γραμμή - + Closes the line being drawn Κλείνει τη γραμμή που σχεδιάζεται @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Αφαιρέστε Σημείο - + Removes a point from an existing Wire or B-spline Αφαιρεί ένα σημείο από ένα υπάρχον σύρμα ή μια υπάρχουσα Καμπύλη βασικής συνάρτησης B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Διάσταση - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Δημιουργεί μια διάσταση. CTRL για προσκόλληση, SHIFT για περιορισμό, ALT για επιλογή ενός τμήματος @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Υποβαθμίστε - + Explodes the selected objects into simpler objects, or subtracts faces Κατακερματίζει τα επιλεγμένα αντικείμενα σε μικρότερα αντικείμενα, ή αφαιρεί όψεις @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Από Προσχέδιο σε Σκαρίφημα - + Convert bidirectionally between Draft and Sketch objects Αμφίδρομη μετατροπή μεταξύ Προσχεδίων και Σκαριφημάτων @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Σχέδιο - + Puts the selected objects on a Drawing sheet Τοποθετεί τα επιλεγμένα αντικείμενα σε ένα φύλλο Σχεδίασης @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Επεξεργασία - + Edits the active object Επεξεργάζεται το ενεργό αντικείμενο @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Έλλειψη - + Creates an ellipse. CTRL to snap Δημιουργεί μια έλλειψη. CTRL για προσκόλληση @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Σύνθεση όψεων - + Creates a facebinder object from selected face(s) Δημιουργεί μία σύνθεση όψεων από επιλεγμένη όψη(εις) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Ολοκληρώστε γραμμή - + Finishes a line without closing it Ολοκληρώνει μια γραμμή χωρίς να την κλείνει @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Αντιστρέψτε Διάσταση - + Flip the normal direction of a dimension Αντιστρέψτε την κανονική κατεύθυνση μιας διάστασης @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Επισκευάστε - + Heal faulty Draft objects saved from an earlier FreeCAD version Επισκευάστε τα ελαττωματικά Προσχέδια που έχουν αποθηκευτεί από παλαιότερη έκδοση του FreeCAD @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Ετικέτα - + Creates a label, optionally attached to a selected object or element Δημιουργεί μια ετικέτα, η οποία επισυνάπτεται προαιρετικά σε κάποιο επιλεγμένο αντικείμενο ή στοιχείο + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Γραμμή - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Δημιουργεί μια γραμμή από 2 σημεία. CTRL για προσκόλληση, SHIFT για περιορισμό @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Κατοπτρίστε - + Mirrors the selected objects along a line defined by two points Κατοπτρίζει τα επιλεγμένα αντικείμενα κατά μήκος μιας γραμμής που ορίζεται από δύο σημεία @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Μετακινήστε - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Μετατοπίστε - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Μετατοπίζει το ενεργό αντικείμενο. CTRL για προσκόλληση, ALT για αντιγραφή @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Διάταξη κατά επιλεγμένη διαδρομή - + Creates copies of a selected object along a selected path. Δημιουργεί αντίγραφα ενός επιλεγμένου αντικειμένου κατά μήκος μιας επιλεγμένης διαδρομής. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Σημείο - + Creates a point object Δημιουργεί ένα σημειακό στοιχείο @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Πολύγωνο - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Δημιουργεί ένα κανονικό πολύγωνο. CTRL για προσκόλληση, SHIFT για περιορισμό @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Ορθογώνιο - + Creates a 2-point rectangle. CTRL to snap Δημιουργεί ένα ορθογώνιο από 2 σημεία. CTRL για προσκόλληση @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Περιστρέψτε - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Περιστρέφει τα επιλεγμένα αντικείμενα. CTRL για προσκόλληση, SHIFT για περιορισμό, ALT για δημιουργία αντιγράφου @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Κλίμακα - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Κλιμακoποιεί τα επιλεγμένα αντικείμενα από ένα σημείο βάσης. CTRL για προσκόλληση, SHIFT για περιορισμό, ALT για αντιγραφή @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Επιλέξτε ομάδα - + Selects all objects with the same parents as this group Επιλέγει όλα τα αντικείμενα που έχουν τα ίδια γονικά στοιχεία με αυτήν την ομάδα @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Επιλέξτε Επίπεδο - + Select a working plane for geometry creation Επιλέξτε ένα επίπεδο εργασίας για τη δημιουργία γεωμετρίας @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Δημιουργεί ένα στοιχείο μεσολάβησης από το τρέχον επίπεδο εργασίας - + Create Working Plane Proxy Δημιουργία Στοιχείου Μεσολάβησης Επιπέδου Εργασίας @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Δισδιάστατη προβολή σχήματος - + Creates Shape 2D views of selected objects Δημιουργεί δισδιάστατες προβολές Σχήματος επιλεγμένων αντικειμένων @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Σχήμα από κείμενο... - + Creates text string in shapes. Δημιουργεί συμβολοσειρά κειμένου σε σχήματα. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Εμφανίστε τη Γραμμή Εργαλείων Προσκόλλησης - + Shows Draft snap toolbar Εμφανίζει την Γραμμή Εργαλείων Προσκόλλησης Προσχεδίου @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Ορίστε Κλίση - + Sets the slope of a selected Line or Wire Ορίζει την κλίση μιας επιλεγμένης γραμμής ή ενός επιλεγμένου σύρματος @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Γωνίες - + Snaps to 45 and 90 degrees points on arcs and circles Προσκόλληση στα σημεία των 45 και 90 μοιρών σε τόξα και κύκλους @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Κέντρο - + Snaps to center of circles and arcs Προσκόλληση στο κέντρο κύκλων και τόξων @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Διαστάσεις - + Shows temporary dimensions when snapping to Arch objects Εμφανίζει τις προσωρινές διαστάσεις όταν προσκολλά σε Αρχιτεκτονικά στοιχεία @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Τελικό σημείο - + Snaps to endpoints of edges Προσκόλληση στα τελικά σημεία των ακμών @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Επέκταση - + Snaps to extension of edges Προσκόλληση στην επέκταση των ακμών @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Κάναβος - + Snaps to grid points Προσκόλληση στα σημεία του κανάβου @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Σημείο τομής - + Snaps to edges intersections Προσκόλληση στα σημεία τομής των ακμών @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Εναλλαγή Ενεργοποίησης/Απενεργοποίησης - + Activates/deactivates all snap tools at once Ενεργοποιεί/απενεργοποιεί όλα τα εργαλεία προσκόλλησης ταυτόχρονα - + Lock Κλειδώστε @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Μέσο - + Snaps to midpoints of edges Προσκόλληση στα μέσα των ακμών @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Εγγύτερο - + Snaps to nearest point on edges Προσκόλληση στο εγγύτερο σημείο στις ακμές @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ορθογώνιο - + Snaps to orthogonal and 45 degrees directions Προσκόλληση στις ορθογώνιες και 45 μοιρών κατευθύνσεις @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Παράλληλο - + Snaps to parallel directions of edges Προσκόλληση στις παράλληλες κατευθύνσεις των ακμών @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Κάθετο - + Snaps to perpendicular points on edges Προσκόλληση στα κάθετα σημεία στις ακμές @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Προσκόλληση στις ειδικές θέσεις των αντικειμένων @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Επίπεδο Εργασίας - + Restricts the snapped point to the current working plane Περιορίζει το προσκολλημένο σημείο στο τρέχον επίπεδο εργασίας @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Χωρισμός - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Εκτείνει τα επιλεγμένα αντικείμενα @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Κείμενο - + Creates an annotation. CTRL to snap Δημιουργεί μια περιγραφή. CTRL για προσκόλληση @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Εναλλαγή της Λειτουργίας Κατασκευής για τα επόμενα αντικείμενα. - + Toggle Construction Mode Εναλλαγή Λειτουργίας Κατασκευής @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Εναλλαγή Λειτουργίας Συνέχισης - + Toggles the Continue Mode for next commands. Εναλλάσσει την Λειτουργία Συνέχισης για τις επόμενες εντολές. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Εναλλαγή λειτουργίας προβολής - + Swaps display mode of selected objects between wireframe and flatlines Εναλλάσσει την λειτουργία προβολής επιλεγμένων αντικειμένων μεταξύ σκελετού και επίπεδων γραμμών @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Εναλλαγή Κανάβου - + Toggles the Draft grid on/off Ενεργοποιεί/απενεργοποιεί τον κάναβο Προσχεδίου - + Grid Κάναβος - + Toggles the Draft grid On/Off Ενεργοποιεί/Απενεργοποιεί τον κάναβο Προσχεδίου @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Περικοπή ή Επέκταση γραμμών - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Περικόπτει ή επεκτείνει το επιλεγμένο αντικείμενο, ή επεκτείνει μεμονωμένες όψεις. CTRL για προσκόλληση, SHIFT για περιορισμό στο τρέχον τμήμα ή στο κανονικό, ALT για αντιστροφή @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Αναιρέστε το τελευταίο τμήμα - + Undoes the last drawn segment of the line being drawn Αναιρεί το τελευταίο σχεδιασμένο τμήμα της γραμμής που σχεδιάζεται @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Αναβαθμίστε - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Ενώνει τα επιλεγμένα αντικείμενα σε ένα, ή μετατρέπει τα κλειστά σύρματα σε γεμάτες όψεις, ή ενώνει όψεις - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Προσθέτει ένα VisGroup - - Draft_Wire - - DWire - Σύρμα προσχεδίου + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Δημιουργεί ένα σύρμα προσχεδίου (DWire) πολλαπλών σημείων. CTRL για προσκόλληση, SHIFT για περιορισμό + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Από σύρμα σε Καμπύλη βασικής συνάρτησης B-spline - + Converts between Wire and B-spline Μετατρέπει από Σύρμα σε Καμπύλη βασικής συνάρτησης B-spline και αντίστροφα @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Γενικές Ρυθμίσεις Προσχεδίου - + This is the default color for objects being drawn while in construction mode. Αυτό είναι το προεπιλεγμένο χρώμα για τα αντικείμενα που σχεδιάζονται ενώ βρίσκεστε σε λειτουργία κατασκευής. - + This is the default group name for construction geometry Αυτό είναι το προεπιλεγμένο όνομα ομάδας για την κατασκευαστική γεωμετρία - + Construction Κατασκευή @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainΑποθήκευση του τρέχοντος χρώματος και πλάτους γραμμών για όλες τις συνεδρίες - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Αν αυτό έχει επιλεχθεί, η λειτουργία αντιγραφής θα διατηρείται για όλες τις εντολές, διαφορετικά οι εντολές θα ξεκινούν πάντα σε λειτουργία μη αντιγραφής - + Global copy mode Καθολική λειτουργία αντιγραφής - + Default working plane Προεπιλεγμένο επίπεδο εργασίας - + None Κανένα - + XY (Top) XY (Οροφή) - + XZ (Front) XZ (Πρόσοψη) - + YZ (Side) YZ (Πλευρά) @@ -1987,12 +2022,12 @@ such as "Arial:Bold" Γενικές ρυθμίσεις - + Construction group name Όνομα ομάδας κατασκευής - + Tolerance Ανοχή @@ -2017,22 +2052,22 @@ such as "Arial:Bold" Εδώ μπορείτε να καθορίσετε έναν κατάλογο που περιέχει αρχεία SVG που περιέχουν <pattern> ορισμούς οι οποίοι μπορούν να προστεθούν στα καθιερωμένα μοτίβα διαγράμμισης επιφάνειας Προσχεδίου - + Draft interface mode Λειτουργία διεπαφής Προσχεδίου - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Αυτή είναι η λειτουργία διεπαφής χρήστη στην οποία θα λειτουργήσει η λειτουργική μονάδα Προσχεδίου: Η λειτουργία γραμμής εργαλείων θα τοποθετήσει όλες τις ρυθμίσεις Προσχεδίου σε ξεχωριστή γραμμή εργαλείων, ενώ η λειτουργία γραμμής εργασιών θα χρησιμοποιήσει το σύστημα Προβολής Εργασιών FreeCAD για αλληλεπίδραση με το χρήστη - + Toolbar Γραμμή εργαλείων - + Taskview Προβολή Εργασιών @@ -2062,12 +2097,12 @@ such as "Arial:Bold" Πλήκτρο τροποποίησης Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Κανονικά, μετά την αντιγραφή των αντικειμένων, επιλέγονται τα αντίγραφα. Αν αυτό έχει επιλεχθεί, αντί αυτών θα επιλέγονται τα αντικείμενα βάσης. - + Select base objects after copying Επιλογή αντικειμένων βάσης μετά από την αντιγραφή @@ -2102,7 +2137,7 @@ such as "Arial:Bold" Οι κύριες γραμμές θα σχεδιαστούν παχύτερες. Ορίστε εδώ πόσα τετράγωνα θα υπάρχουν μεταξύ των κυρίων γραμμών. - + Internal precision level Επίπεδο εσωτερικής ακρίβειας @@ -2217,12 +2252,12 @@ such as "Arial:Bold" Μεταφράστε το λευκό χρώμα γραμμής σε μαύρο - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Όταν αυτό έχει επιλεχθεί, τα εργαλεία Προσχεδίου θα δημιουργούν θεμελιακά στοιχεία εξαρτημάτων αντί για στοιχεία Προσχεδίου, όταν διατίθενται. - + Use Part Primitives when available Χρησιμοποιήστε Θεμελιακά Στοιχεία Εξαρτημάτων όταν διατίθενται @@ -2242,12 +2277,7 @@ such as "Arial:Bold" Προσκόλληση πάντα (απενεργοποιήστε την λειτουργία προσκόλλησης) - - Construction geometry - Κατασκευαστική γεωμετρία - - - + Construction geometry color Χρώμα κατασκευαστικής γεωμετρίας @@ -2387,7 +2417,7 @@ such as "Arial:Bold" Επιλέξτε ένα αρχείο γραμματοσειράς - + Fill objects with faces whenever possible Γέμισμα των αντικειμένων με όψεις όποτε είναι εφικτό @@ -2678,7 +2708,7 @@ such as "Arial:Bold" Αυτόματη αναβάθμιση (μόνο για εισαγωγέα παλαιού τύπου) - + Prefix labels of Clones with: Οι ετικέτες των κλώνων θα έχουν το πρόθεμα: @@ -2717,7 +2747,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Αυτή είναι η επιλεγμένη μέθοδος για την εισαγωγή χρώματος στοιχείου SVG στο FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Αν αυτό έχει επιλεχθεί, τα αντικείμενα θα εμφανίζονται ως γεμάτα κατά προεπιλογή. Διαφορετικά, θα εμφανίζονται ως σκελετός @@ -2797,17 +2827,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Αν αυτό έχει επιλεχθεί, αντικείμενα του ίδιου στρώματος θα ενώνονται σε Μπλοκ Προσχεδίου, κάνοντας την προβολή ταχύτερη, αλλά δυσχεραίνοντας την επεξεργασία τους - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate Όταν σχεδιάζετε γραμμές, ορίστε την εστίαση στο Μήκος αντί της συντεταγμένης Χ @@ -2887,12 +2907,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Μέγιστο Τμήμα Καμπύλης Spline: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2903,695 +2923,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Κατασκευαστική Γεωμετρία + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Σχετικό + + + + R + R + + + + Continue + Συνεχίστε + + + + T + T + + + + Close + Κλείσιμο + + + + O + O + + + + Copy + Αντιγραφή + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Γεμίστε + + + + L + L + + + + Exit + Έξοδος + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Μήκος + + + + H + H + + + + Wipe + Εκκαθαρίστε + + + + W + W + + + + Set WP + Ορίστε WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Περιορίστε X + + + + X + X + + + + Restrict Y + Περιορίστε Y + + + + Y + Y + + + + Restrict Z + Περιορίστε Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Προσκόλληση Προσχεδίου - - - Draft creation tools - Εργαλεία δημιουργίας Προσχεδίου - - - - Draft modification tools - Εργαλεία τροποποίησης Προσχεδίου - - - - Utilities - Βοηθήματα - - - - Wire tools - Εργαλεία σύρματος - - - - Snapping - Προσκόλληση - draft - + not shape found δεν βρέθηκε σχήμα - + All Shapes must be co-planar Όλα τα Σχήματα πρέπει να είναι συνεπίπεδα - + The given object is not planar and cannot be converted into a sketch. Το δεδομένο αντικείμενο δεν είναι επίπεδο και δεν μπορεί να μετατραπεί σε σκαρίφημα. - + Unable to guess the normal direction of this object Αδυναμία πρόβλεψης της κανονικής διεύθυνσης αυτού του αντικειμένου - + Draft Command Bar Γραμμή Εντολών Προσχεδίου - + Toggle construction mode Εναλλαγή λειτουργίας κατασκευής - + Current line color Τρέχον χρώμα γραμμής - + Current face color Τρέχον χρώμα όψης - + Current line width Τρέχον πλάτος γραμμής - + Current font size Τρέχον μέγεθος γραμματοσειράς - + Apply to selected objects Εφαρμόστε στα επιλεγμένα αντικείμενα - + Autogroup off Απενεργοποίηση Αυτόματης Ομαδοποίησης - + active command: ενεργή εντολή: - + None Κανένα - + Active Draft command Ενεργή εντολή Προσχεδίου - + X coordinate of next point Συντεταγμένη X του επόμενου σημείου - + X X - + Y Y - + Z Z - + Y coordinate of next point Συντεταγμένη Y του επόμενου σημείου - + Z coordinate of next point Συντεταγμένη Ζ του επόμενου σημείου - + Enter point Εισάγετε σημείο - + Enter a new point with the given coordinates Εισάγετε ένα νέο σημείο με τις δεδομένες συντεταγμένες - + Length Μήκος - + Angle Γωνία - + Length of current segment Μήκος του τρέχοντος τμήματος - + Angle of current segment Γωνία του τρέχοντος τμήματος - + Radius Ακτίνα - + Radius of Circle Ακτίνα Κύκλου - + If checked, command will not finish until you press the command button again Αν έχει επιλεχθεί, η εντολή δεν θα ολοκληρωθεί έως ότου πιέσετε ξανά το πλήκτρο εντολής - + If checked, an OCC-style offset will be performed instead of the classic offset Αν έχει επιλεχθεί, μια μετατόπιση τύπου μορφοποίησης OCC θα εκτελεστεί αντί της κλασσικής μετατόπισης - + &OCC-style offset Μετατόπιση τύπου μορφοποίησης &OCC - + Add points to the current object Προσθέστε σημεία στο τρέχον αντικείμενο - + Remove points from the current object Αφαιρέστε σημεία από το τρέχον αντικείμενο - + Make Bezier node sharp Κάντε τον κόμβο καμπύλης Bezier αιχμηρό - + Make Bezier node tangent Κάντε τον κόμβο καμπύλης Bezier εφαπτόμενο - + Make Bezier node symmetric Κάντε τον κόμβο καμπύλης Bezier συμμετρικό - + Sides Πλευρές - + Number of sides Αριθμός πλευρών - + Offset Μετατοπίστε - + XY (top) XY (οροφή) - - Select XY plane - Επιλέξτε επίπεδο XY - - - + XZ (front) XZ (πρόσοψη) - - Select XZ plane - Επιλέξτε επίπεδο XΖ - - - + YZ (side) YZ (πλευρά) - - Select YZ plane - Επιλέξτε επίπεδο YZ - - - + View Προβολή - - Select plane perpendicular to the current view - Επιλέξτε επίπεδο κάθετο προς την τρέχουσα προβολή - - - + Auto Αυτόματο - - Do not project points to a drawing plane - Μην προβάλετε σημεία πάνω σε ένα επίπεδο σχεδίασης - - - + Text string to draw Συμβολοσειρά κειμένου σχεδίασης - + String Συμβολοσειρά - + Height of text Ύψος κειμένου - + Height Ύψος - + Intercharacter spacing Κενό μεταξύ των χαρακτήρων - + Tracking Απόσταση Γραμμάτων - + Full path to font file: Πλήρης διαδρομή για το αρχείο γραμματοσειράς: - + Open a FileChooser for font file Άνοιγμα ενός Επιλογέα Αρχείων για το αρχείο γραμματοσειράς - + Grid spacing Αποστάσεις του κανάβου - + The spacing between the grid lines Η απόσταση μεταξύ των γραμμών κανάβου - + Main line every Κύρια γραμμή κάθε - + The number of lines between main lines Ο αριθμός γραμμών μεταξύ των κυρίων γραμμών - + Center plane on view Κεντρικό επίπεδο στην προβολή - - Select Plane - Επιλέξτε επίπεδο - - - + Line Γραμμή - + DWire Σύρμα προσχεδίου - + Circle Κύκλος - + Center X Κέντρο X - + Arc Τόξο - + Point Σημείο - + Label Ετικέτα - + Distance Distance - + Trim Περικοπή - + Pick Object Διαλέξτε Αντικείμενο - + Edit Επεξεργασία - + Global X Καθολικό X - + Global Y Καθολικό Y - + Global Z Καθολικό Z - + Local X Τοπικό X - + Local Y Τοπικό Y - + Local Z Τοπικό Z - + Invalid Size value. Using 200.0. Μη έγκυρη τιμή Μεγέθους. Θα χρησιμοποιηθεί η τιμή 200.0. - + Invalid Tracking value. Using 0. Μη έγκυρη τιμή Απόστασης Γραμμάτων. Θα χρησιμοποιηθεί η τιμή 0. - + Please enter a text string. Παρακαλώ εισάγετε μια συμβολοσειρά κειμένου. - + Select a Font file Επιλέξτε ένα αρχείο Γραμματοσειράς - + Please enter a font file. Παρακαλώ εισάγετε ένα αρχείο γραμματοσειράς. - + Autogroup: Αυτόματη Ομαδοποίηση: - + Faces Όψεις - + Remove Αφαίρεση - + Add Προσθήκη - + Facebinder elements Στοιχεία σύνθεσης όψεων - + Create Line Δημιουργήστε Γραμμή - - Pick next point: - - Διαλέξτε επόμενο σημείο: - - - - + Convert to Wire Μετατρέψτε σε Σύρμα - + BSpline Καμπύλη Βασικής Συνάρτησης BSpline - + BezCurve Καμπύλη Bezier - + Create BezCurve Δημιουργήστε Καμπύλη Bezier - + Rectangle Ορθογώνιο - + Create Plane Δημιουργήστε Επίπεδο - + Create Rectangle Δημιουργήστε Ορθογώνιο - + Create Circle Δημιουργήστε Κύκλο - + Create Arc Δημιουργήστε Τόξο - + Start Angle Γωνία Έναρξης - + Aperture Άνοιγμα - + Polygon Πολύγωνο - + Create Polygon Δημιουργήστε Πολύγωνο - + Ellipse Έλλειψη - + Create Ellipse Δημιουργήστε Έλλειψη - + Text Κείμενο - + Create Text Δημιουργήστε Κέιμενο - + Dimension Διάσταση - + Create Dimension Δημιουργήστε Διάσταση - + ShapeString Πλαίσιο Συμβολοσειράς Κειμένου - + Create ShapeString Δημιουργήστε Πλαίσιο Συμβολοσειράς Κειμένου - + Copy Αντιγραφή - + Move Μετακινήστε - + Change Style Αλλαγή Τύπου Μορφοποίησης - + Rotate Περιστρέψτε - - Cannot offset this object type - - Δεν μπορεί να μετατοπίσει αυτόν τον τύπο αντικειμένου - - - - + Stretch Stretch - + Upgrade Αναβαθμίστε - + Downgrade Υποβαθμίστε - + Selection is not a Knot Η επιλογή δεν είναι Κόμβος - + Convert to Sketch Μετατρέψτε σε Σκαρίφημα - + Convert to Draft Μετατρέψτε σε Προσχέδιο - + Convert Μετατρέψτε - + Array Διάταξη - + Create Point Δημιουργήστε Σημείο - + Mirror Κατοπτρίστε - + &Draft &Προσχέδιο @@ -3615,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Για να επιτρέψετε στο FreeCAD να κατεβάσει αυτές τις βιβλιοθήκες, απαντήστε Ναι. - + Draft.makeBSpline: not enough points Προσχέδιο.δημιουργίαΚαμπύληςΒασικήςΣυνάρτησηςBSpline: δεν υπάρχουν αρκετά σημεία - + Draft.makeBSpline: Equal endpoints forced Closed Προσχέδιο.δημιουργίαΚαμπύληςΒασικήςΣυνάρτησηςBSpline: Αναγκαστικό Κλείσιμο ισοδύναμων τελικών σημείων - + Draft.makeBSpline: Invalid pointslist Προσχέδιο.δημιουργίαΚαμπύληςΒασικήςΣυνάρτησηςBSpline: Μη έγκυρη λίστα σημείων - + No object given Δεν έχει δοθεί κανένα αντικείμενο - + The two points are coincident Τα δύο σημεία είναι συμπίπτοντα - + Found groups: closing each open object inside Βρέθηκαν ομάδες: κλείσιμο κάθε ανοικτού αντικειμένου εντός - + Found mesh(es): turning into Part shapes Βρέθηκε πλέγμα(τα): μετατροπή σε σχήματα Εξαρτημάτων - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Βρέθηκαν 2 αντικείμενα: πραγματοποιείται συγχώνευση - + Found several objects: creating a shell Βρέθηκαν διάφορα αντικείμενα: πραγματοποιείται δημιουργία ενός κελύφους - + Found several coplanar objects or faces: creating one face Βρέθηκαν διάφορα συνεπίπεδα αντικείμενα ή όψεις: πραγματοποιείται δημιουργία μιας όψης - + Found 1 non-parametric objects: draftifying it Βρέθηκε ένα μη παραμετρικό αντικείμενο: πραγματοποιείται δημιουργία προσχεδίου - + Found 1 closed sketch object: creating a face from it Βρέθηκε ένα κλειστό σκαρίφημα: πραγματοποιείται δημιουργία όψης από αυτό - + Found 1 linear object: converting to line Βρέθηκε 1 γραμμικό αντικείμενο: πραγματοποιείται μετατροπή σε γραμμή - + Found closed wires: creating faces Βρέθηκαν κλειστά σύρματα: πραγματοποιείται δημιουργία όψεων - + Found 1 open wire: closing it Βρέθηκε 1 ανοικτό σύρμα: πραγματοποιείται κλείσιμο - + Found several open wires: joining them Βρέθηκαν διάφορα ανοικτά σύρματα: πραγματοποιείται ένωση αυτών - + Found several edges: wiring them Βρέθηκαν διάφορες ακμές; πραγματοποιείται ψηφιοποίηση αυτών με τη χρήση σύρματος - + Found several non-treatable objects: creating compound Βρέθηκαν διάφορα μη επισκευάσιμα αντικείμενα: πραγματοποιείται δημιουργία σύνθετου σχήματος - + Unable to upgrade these objects. Αδυναμία αναβάθμισης αυτών των αντικειμένων. - + Found 1 block: exploding it Βρέθηκε 1 μπλοκ: πραγματοποιείται κατακερματισμός - + Found 1 multi-solids compound: exploding it Βρέθηκε 1 σύνθετο σχήμα πολλαπλών στερεών: πραγματοποιείται κατακερματισμός - + Found 1 parametric object: breaking its dependencies Βρέθηκε 1 παραμετρικό αντικείμενο: πραγματοποιείται άρση εξαρτήσεων - + Found 2 objects: subtracting them Βρέθηκαν 2 αντικείμενα: πραγματοποιείται αφαίρεση - + Found several faces: splitting them Βρέθηκαν διάφορες όψεις: πραγματοποιείται διαχωρισμός - + Found several objects: subtracting them from the first one Βρέθηκα διάφορα αντικείμενα: πραγματοποιείται αφαίρεσή τους από το πρώτο - + Found 1 face: extracting its wires Βρέθηκε 1 όψη: πραγματοποιείται εξαγωγή των συρμάτων της - + Found only wires: extracting their edges Βρέθηκαν μόνο σύρματα: πραγματοποιείται εξαγωγή των ακμών τους - + No more downgrade possible Δεν είναι δυνατή η περαιτέρω υποβάθμιση - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _ΚαμπύληςΒασικήςΣυνάρτησηςBSpline.δημιουργίαΓεωμετρίας: Κλειστή με ίδιο πρώτο/τελευταίο Σημείο. Η γεωμετρία δεν ενημερώθηκε. - + No point found No point found - + ShapeString: string has no wires Πλαίσιο Συμβολοσειράς Κειμένου: η συμβολοσειρά δεν έχει σύρματα - + Relative Σχετικό - + Continue Συνεχίστε - + Close Κλείσιμο @@ -3832,7 +3998,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Περιορίστε Z - + Select edge Επιλέξτε ακμή @@ -3847,7 +4013,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Λειτουργία μήκους - + Wipe Εκκαθαρίστε @@ -3862,454 +4028,279 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cycle snap object - + Check this to lock the current angle Επιλέξτε αυτό για να κλειδώσετε την τρέχουσα γωνία - + Coordinates relative to last point or absolute Συντεταγμένες σχετικές με το τελευταίο σημείο ή απόλυτες - + Filled Γεμάτο - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Επιλέξτε αυτό αν το αντικείμενο θα έπρεπε να εμφανίζεται ως γεμάτο, διαφορετικά θα εμφανίζεται ως σκελετός - - - + Finish Ολοκλήρωση - + Finishes the current drawing or editing operation Ολοκληρώνει την τρέχουσα σχεδίαση ή λειτουργία επεξεργασίας - + &Undo (CTRL+Z) %Αναίρεση (CTRL+Z) - + Undo the last segment Αναιρέστε το τελευταίο τμήμα - + Finishes and closes the current line Ολοκληρώνει και κλείνει την τρέχουσα γραμμή - + Wipes the existing segments of this line and starts again from the last point Εκκαθαρίζει τα υπάρχοντα τμήματα αυτής της γραμμής και ξαναρχίζει από το τελευταίο σημείο - + Set WP Ορίστε WP - + Reorients the working plane on the last segment Αναπροσανατολίζει το επίπεδο εργασίας στο τελευταίο τμήμα - + Selects an existing edge to be measured by this dimension Επιλέγει μια υπάρχουσα ακμή για να μετρηθεί από αυτήν την διάσταση - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - επιλογές - - - + Default Προεπιλεγμένο - + Pick a face to define the drawing plane Διαλέξτε μια όψη που θα καθορίσει το επίπεδο σχεδίασης - - First point: - Πρώτο σημείο: - - - - Closing - Κλείσιμο - - - + Create Wire Create Wire - - Removing last point - Αφαίρεση τελευταίου σημείου - - - - Next point: - Επόμενο σημείο: - - - - Restarting from - Επανεκκίνηση από - - - + Unable to create a Wire from selected objects Αδυναμία δημιουργίας Σύρματος από τα επιλεγμένα αντικείμενα - + Spline has been closed Η καμπύλη spline έχει κλείσει - + Last point has been removed Αφαιρέθηκε το τελευταίο σημείο - - Pick next point, or Finish (shift-F) or close (o): - Διαλέξτε επόμενο σημείο, ή Ολοκληρώστε (shift-F) ή κλείστε (ο): - - - + Create B-spline Δημιουργία καμπύλης B-spline - + Bezier curve has been closed Η καμπύλη Bezier έχει κλείσει - - Pick first point: - Διαλέξτε πρώτο σημείο: - - - - Pick opposite point: - Διαλέξτε αντίθετο σημείο: - - - - Pick center point: - Διαλέξτε κεντρικό σημείο: - - - - Pick radius: - Διαλέξτε ακτίνα: - - - - Pick start angle: - Διαλέξτε γωνία εκκίνησης: - - - - Pick aperture: - Διαλέξτε άνοιγμα: - - - - Aperture angle: - Γωνία ανοίγματος: - - - - Pick location point: - Διαλέξτε σημείο τοποθεσίας: - - - + Edges don't intersect! Οι ακμές δεν τέμνονται! - + Pick ShapeString location point: Διαλέξτε σημείο τοποθεσίας Πλαισίου Συμβολοσειράς Κειμένου: - + Select an object to move Επιλέξτε ένα αντικείμενο προς μετακίνηση - - Pick start point: - Διαλέξτε σημείο εκκίνησης: - - - - Pick end point: - Διαλέξτε τελικό σημείο: - - - + Select an object to rotate Επιλέξτε ένα αντικείμενο προς περιστροφή - - Pick rotation center: - Διαλέξτε κέντρο περιστροφής: - - - - Pick base angle: - Διαλέξτε γωνία βάσης: - - - - Pick rotation angle: - Διαλέξτε γωνία περιστροφής: - - - + Select an object to offset Επιλέξτε ένα αντικείμενο προς μετατόπιση - + Offset only works on one object at a time Η μετατόπιση λειτουργεί σε ένα αντικείμενο τη φορά - + Sorry, offset of Bezier curves is currently still not supported Λυπούμαστε, η μετατόπιση των καμπύλων Bezier εξακολουθεί να μην υποστηρίζεται - - Pick distance: - Διαλέξτε απόσταση: - - - + Select an object to stretch Επιλέξτε ένα αντικείμενο προς έκταση - - Pick first point of selection rectangle: - Διαλέξτε το πρώτο σημείο του ορθογωνίου επιλογής: - - - - Pick opposite point of selection rectangle: - Διαλέξτε το αντίθετο σημείο του ορθογωνίου επιλογής: - - - - Pick start point of displacement: - Διαλέξτε το σημείο εκκίνησης της μετακίνησης: - - - - Pick end point of displacement: - Διαλέξτε το τελικό σημείο της μετακίνησης: - - - + Turning one Rectangle into a Wire Πραγματοποιείται μετατροπή Ορθογωνίου σε Σύρμα - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Επιλέξτε ένα αντικείμενο προς αναβάθμιση - + Select object(s) to trim/extend Επιλέξτε αντικείμενο(α) προς περικοπή/επέκταση - + Unable to trim these objects, only Draft wires and arcs are supported Αδυναμία περικοπής αυτών των αντικειμένων, μόνο σύρματα Προσχεδίου και τόξα υποστηρίζονται - + Unable to trim these objects, too many wires Αδυναμία περικοπής αυτών των αντικειμένων, πάρα πολλά σύρματα - + These objects don't intersect Αυτά τα αντικείμενα δεν τέμνονται - + Too many intersection points Πάρα πολλά σημεία τομής - + Select an object to scale Επιλέξτε ένα αντικείμενο προς κλιμακοποίηση - - Pick base point: - Διαλέξτε σημείο βάσης: - - - - Pick reference distance from base point: - Διαλέξτε απόσταση αναφοράς από το σημείο βάσης: - - - - Pick new distance from base point: - Διαλέξτε νέα απόσταση από το σημείο βάσης: - - - + Select an object to project Επιλέξτε ένα αντικείμενο προς προβολή - - This object type is not editable - Αυτός ο τύπος αντικειμένου δεν είναι επεξεργάσιμος - - - + Please select only one object Παρακαλώ επιλέξτε μόνο ένα αντικείμενο - + Select a Draft object to edit Επιλέξτε ένα Προσχέδιο προς επεξεργασία - + Active object must have more than two points/nodes Το ενεργό αντικείμενο θα πρέπει να έχει πάνω από δύο σημεία/κόμβους - + Endpoint of BezCurve can't be smoothed Το τελικό σημείο της Καμπύλης Bezier δεν μπορεί να εξομαλυνθεί - + Select an object to convert Επιλέξτε ένα αντικείμενο προς μετατροπή - + Select an object to array Επιλέξτε ένα αντικείμενο προς διάταξη - + Please select base and path objects Παρακαλώ επιλέξτε αντικείμενα βάσης και στοιχεία διαδρομής - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Επιλέξτε ένα αντικείμενο προς κλωνοποίηση - + Select face(s) on existing object(s) Επιλέξτε όψη(εις) σε υπάρχον αντικείμενο(α) - + Select an object to mirror Επιλέξτε ένα αντικείμενο προς κατοπτρισμό - - Pick start point of mirror line: - Διαλέξτε το σημείο εκκίνησης της γραμμής κατοπτρισμού: - - - - Pick end point of mirror line: - Διαλέξτε το τελικό σημείο της γραμμής κατοπτρισμού: - - - + This tool only works with Wires and Lines Αυτό το εργαλείο λειτουργεί μόνο με Σύρματα και Γραμμές - - - Pick target point: - Διαλέξτε σημείο στόχου: - - - - Pick endpoint of leader line: - Διαλέξτε το τελικό σημείο της γραμμής καθοδήγησης: - - - - Pick text position: - Διαλέξτε θέση κειμένου: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4319,56 +4310,354 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Κλίμακα - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Πάνω + + + + Front + Εμπρόσθια + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Αυτόματη + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Περιστροφή + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Βύθισμα + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Βοηθήματα + + + + Wire tools + Εργαλεία σύρματος + + + + Snapping + Προσκόλληση + diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index 407300c424..ec676bb6ec 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index a0e6da150b..4fdb6a07e4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -4,771 +4,806 @@ App::Property - + Defines a hatch pattern Define un patrón de rayado - + Sets the size of the pattern Establecer el tamaño de patrón - + Startpoint of dimension Punto inicial de la dimensión - + Endpoint of dimension Punto final de la dimensión - + Point through which the dimension line passes Punto por donde pasa la línea de cota - + The object measured by this dimension El objeto medido por esta cota - + The geometry this dimension is linked to La geometría de esta dimensión está vinculada a - + The measurement of this dimension La medida de esta cota - + For arc/circle measurements, false = radius, true = diameter Para las mediciones de arco/círculo, false = radio, true = diámetro - + Font size Tamaño de la fuente - + The number of decimals to show El número de decimales a mostrar - + Arrow size Tamaño de flecha - + The spacing between the text and the dimension line El espacio entre el texto y la linea de dimensión - + Arrow type Tipo de flecha - + Font name Nombre de la fuente - + Line width Ancho de la línea - + Line color Color de línea - + Length of the extension lines Longitud de las líneas de extensión - + Rotate the dimension arrows 180 degrees Gira 180 grados las flechas de dimensión - + Rotate the dimension text 180 degrees Girar el texto de dimensión 180 grados - + Show the unit suffix Mostrar el sufijo de unidad - + The position of the text. Leave (0,0,0) for automatic position La posición del texto. Dejar (0,0,0) para posicion automática - + Text override. Use $dim to insert the dimension length Reemplazo de texto. Utilice $dim para introducir la longitud de dimensión - + A unit to express the measurement. Leave blank for system default Una unidad para expresar la medición. Deje en blanco para el defecto del sistema - + Start angle of the dimension Ángulo del comienzo de la cota - + End angle of the dimension Ángulo final de la cota - + The center point of this dimension El punto central de esta cota - + The normal direction of this dimension La dirección normal de esta cota - + Text override. Use 'dim' to insert the dimension length Reemplazo de texto. Utilice $dim para introducir la longitud de dimensión - + Length of the rectangle Longitud del rectángulo - + Radius to use to fillet the corners Radio para redondeo las esquinas - + Size of the chamfer to give to the corners Tamaño del chaflán para dar a las esquinas - + Create a face Crear una cara - + Defines a texture image (overrides hatch patterns) Define una imagen de textura (reemplaza patrones de hatch) - + Start angle of the arc Ángulo inicial del arco - + End angle of the arc (for a full circle, give it same value as First Angle) Ángulo final del arco (para un círculo completo, dar el mismo valor que el primer ángulo) - + Radius of the circle Radio de la circunferencia - + The minor radius of the ellipse El radio menor de la elipse - + The major radius of the ellipse El radio mayor de la elipse - + The vertices of the wire Los vértices del alambre - + If the wire is closed or not Si el alambre está cerrado o no - + The start point of this line El punto de inicio de esta línea - + The end point of this line El punto final de esta linea - + The length of this line La longitud de esta linea - + Create a face if this object is closed Crear una cara si este objeto está cerrado - + The number of subdivisions of each edge El número de subdivisiones de cada arista - + Number of faces Número de caras - + Radius of the control circle Radio del círculo de control - + How the polygon must be drawn from the control circle Cómo se debe dibujar el polígono desde el círculo de control - + Projection direction Dirección de proyección - + The width of the lines inside this object La anchura de las líneas dentro de este objeto - + The size of the texts inside this object El tamaño de los textos dentro de este objeto - + The spacing between lines of text El espaciado entre líneas de texto - + The color of the projected objects El color de los objetos proyectados - + The linked object El objeto vinculado - + Shape Fill Style Estilo de relleno de forma - + Line Style Estilo de línea - + If checked, source objects are displayed regardless of being visible in the 3D model Si está marcada, se muestran objetos de origen sin importar ser visible en el modelo 3D - + Create a face if this spline is closed Crear una cara si este spline está cerrado - + Parameterization factor Factor de parametrización - + The points of the Bezier curve Los puntos de la curva Bezier - + The degree of the Bezier function El grado de la función Bezier - + Continuity Continuidad - + If the Bezier curve should be closed or not Si la curva Bezier se debe cerrar o no - + Create a face if this curve is closed Crear una cara si esta curva es cerrada - + The components of this block Los componentes de este bloque - + The base object this 2D view must represent El objeto base que debe representar esta vista 2D - + The projection vector of this object El vector de proyección de este objeto - + The way the viewed object must be projected La forma que el objeto visto debe ser proyectado - + The indices of the faces to be projected in Individual Faces mode Los índices de las caras a ser proyectado en el modo de caras individuales - + Show hidden lines Mostrar líneas ocultas - + The base object that must be duplicated El objeto base que debe ser duplicado - + The type of array to create El tipo de matriz a crear - + The axis direction La dirección del eje - + Number of copies in X direction Número de copias en dirección a X - + Number of copies in Y direction Número de copias en dirección a Y - + Number of copies in Z direction Número de copias en dirección a Z - + Number of copies Número de copias - + Distance and orientation of intervals in X direction Distancia y orientación de intervalos en dirección X - + Distance and orientation of intervals in Y direction Distancia y orientación de intervalos en dirección Y - + Distance and orientation of intervals in Z direction Distancia y orientación de intervalos en dirección Z - + Distance and orientation of intervals in Axis direction Distancia y orientación de intervalos en dirección del eje - + Center point Punto central - + Angle to cover with copies Ángulo para cubrir con las copias - + Specifies if copies must be fused (slower) Especifica si copias deben ser fusionadas (más lento) - + The path object along which to distribute objects El objeto de trayectoria a lo largo del cual distribuir objetos - + Selected subobjects (edges) of PathObj Subobjetos seleccionados (bordes) de PathObj - + Optional translation vector Vector de traslación opcional - + Orientation of Base along path Orientación de Base a lo largo de la trayectoria - + X Location Posición X - + Y Location Posición Y - + Z Location Posición Z - + Text string Cadena de texto - + Font file name Nombre del archivo fuente - + Height of text Altura de texto - + Inter-character spacing Espaciado entre caracteres - + Linked faces Caras vinculadas - + Specifies if splitter lines must be removed Especifica si deben eliminarse las líneas divisor - + An optional extrusion value to be applied to all faces Un valor opcional de extrusión a ser aplicado a todas las caras - + Height of the rectangle Altura del rectángulo - + Horizontal subdivisions of this rectangle Subdivisiones horizontales de este rectángulo - + Vertical subdivisions of this rectangle Subdivisiones verticales de este rectángulo - + The placement of this object La posición de este objeto - + The display length of this section plane Mostrar la longitud del plano de sección - + The size of the arrows of this section plane El tamaño de las flechas de este plano de sección - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Para los modos Cutlines y Cute Faces, esto deja las caras en el lugar de corte - + The base object is the wire, it's formed from 2 objects El objeto base es el alambre formado por 2 objetos - + The tool object is the wire, it's formed from 2 objects El objeto herramienta es el alambre formado por 2 objetos - + The length of the straight segment La longitud del segmento recto - + The point indicated by this label El punto indicado por esta etiqueta - + The points defining the label polyline Los puntos de definición de la polilínea de la etiqueta - + The direction of the straight segment La dirección de la recta segmento - + The type of information shown by this label El tipo de información mostrado por esta etiqueta - + The target object of this label El objeto de destino de esta etiqueta - + The text to display when type is set to custom El texto aparecerá cuando el tipo sea configurado a medida - + The text displayed by this label El texto que muestra esta etiqueta - + The size of the text El tamaño del texto - + The font of the text El tipo de letra del texto - + The size of the arrow El tamaño de la flecha - + The vertical alignment of the text La alineación vertical del texto - + The type of arrow of this label El tipo de flecha de esta etiqueta - + The type of frame around the text of this object El tipo de marco que rodea el texto de este objeto - + Text color Color del texto - + The maximum number of characters on each line of the text box El número máximo de caracteres por cada renglón del cuadro de texto - + The distance the dimension line is extended past the extension lines La distancia de la línea de cota es extendida más allá de las líneas de extensión - + Length of the extension line above the dimension line La Longitud de la línea de extensión por encima de la línea de cota - + The points of the B-spline Los puntos de la B-spline - + If the B-spline is closed or not Si el B-spline se cierra o no - + Tessellate Ellipses and B-splines into line segments Teselar elipses y curvas B-spline en segmentos de línea - + Length of line segments if tessellating Ellipses or B-splines into line segments Longitud de segmentos de línea si se ha teselado elipses o B-splines en segmentos de línea - + If this is True, this object will be recomputed only if it is visible Si es correcto, este objeto sera reprocesado unicamente si es visible - + Base Base - + PointList Lista de puntos - + Count Count - + The objects included in this clone Los objetos incluidos en este clone - + The scale factor of this clone El factor de escala de este clone - + If this clones several objects, this specifies if the result is a fusion or a compound Si esto reproduce varios objetos, esto especifica si el resultado es una fusión o un compuesto - + This specifies if the shapes sew Especifica si las formas se cosen - + Display a leader line or not Mostrar una línea directriz o no - + The text displayed by this object El texto que muestra este objeto - + Line spacing (relative to font size) Interlineado (en relación con el tamaño de fuente) - + The area of this object - The area of this object + El área de este objeto - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Muestra un símbolo de cota en el extremo del alambre - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusionar muro y objetos de estructura de mismo tipo y material + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Pendiente - + Scale Escalar - + Writing camera position Escribir posición de la cámara - + Writing objects shown/hidden state Escribir objetos estado mostrar/ocultar - + X factor Factor X - + Y factor Factor Y - + Z factor Factor Z - + Uniform scaling Escala uniforme - + Working plane orientation Orientación del plano de trabajo @@ -782,20 +817,25 @@ Instale el complemento de las bibliotecas de dxf manualmente por medio de la opción Herramientas ▸ Gestor de complementos - + This Wire is already flat Este Alambre ya es plano - + Pick from/to points Elegir desde/hacia puntos - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Pendiente a dar a los Alambres/Líneas seleccionados: 0 = horizontal, 1 = 45 grados para arriba, -1 = 45 grados hacia abajo + + + Create a clone + Crear un clon + DraftShapeStringGui @@ -847,28 +887,28 @@ por medio de la opción Herramientas ▸ Gestor de complementos Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Introduzca coordenadas o seleccione el punto con el ratón. Reset 3d point selection - Reset 3d point selection + Reiniciar selección de puntos 3D Reset Point - Reset Point + Reiniciar puntos Draft_AddConstruction - + Add to Construction group Añadir a grupo de la construcción - + Adds the selected objects to the Construction group Añade los objetos seleccionados al grupo de construcción @@ -876,12 +916,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_AddPoint - + Add Point Añadir punto - + Adds a point to an existing Wire or B-spline Añade un punto a un alambre o B-spline existente @@ -889,12 +929,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_AddToGroup - + Move to group... Mover al grupo... - + Moves the selected object(s) to an existing group Mueve el(los) objeto(s) seleccionado(s) a un grupo existente @@ -902,12 +942,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_ApplyStyle - + Apply Current Style Aplicar Estilo Actual - + Applies current line width and color to selected objects Aplica el ancho de línea y color actuales a los objetos seleccionados @@ -915,46 +955,46 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_Arc - + Arc Arco - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Crea un arco por punto central y radio. CTRL para ajuste, SHIFT para restringir Draft_ArcTools - + Arc tools - Arc tools + Herramientas de arco Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arco de 3 puntos - + Creates an arc by 3 points - Creates an arc by 3 points + Crea un arco por 3 puntos Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object Crea una matriz rectangular o polar de un objeto seleccionado @@ -962,12 +1002,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_AutoGroup - + AutoGroup Auto-agrupar - + Select a group to automatically add all Draft & Arch objects to Seleccione un grupo para agregar automáticamente todos los objetos Borrador y Arquitectural a @@ -975,12 +1015,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Crea una múltiple-punto B-spline. CTRL para ajustar, Mayús para restringir @@ -988,12 +1028,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_BezCurve - + BezCurve CurvaBezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Crea una curva Bezier. CTRL para ajustar, MAY para restringir @@ -1001,20 +1041,20 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_BezierTools - + Bezier tools - Bezier tools + Herramientas Bézier Draft_Circle - + Circle Circunferencia - + Creates a circle. CTRL to snap, ALT to select tangent objects Crea una circunferencia. CTRL para forzar, ALT para seleccionar objetos tangentes @@ -1022,12 +1062,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_Clone - + Clone Clonar - + Clones the selected object(s) Copia los objetos seleccionados @@ -1035,12 +1075,12 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_CloseLine - + Close Line Cerrar línea - + Closes the line being drawn Cierra la línea que se está dibujando @@ -1048,27 +1088,27 @@ por medio de la opción Herramientas ▸ Gestor de complementos Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Crea una curva Bézier cúbica +Haga clic y arrastre para definir puntos de control. CTRL para ajuste, SHIFT para restringir Draft_DelPoint - + Remove Point Eliminar punto - + Removes a point from an existing Wire or B-spline Quita un punto de un alambre o B-spline @@ -1076,12 +1116,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Cota - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crea una cota. CTRL para forzar, SHIFT para restringir, ALT para seleccionar un segmento @@ -1089,12 +1129,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Reducir - + Explodes the selected objects into simpler objects, or subtracts faces Explota los objetos seleccionados en objetos más simples, o resta caras @@ -1102,12 +1142,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Borrador a esquema - + Convert bidirectionally between Draft and Sketch objects Convertir bidireccionalmente entre objetos borrador y esquema @@ -1115,12 +1155,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Dibujo - + Puts the selected objects on a Drawing sheet Pone los objetos seleccionados en una hoja de dibujo @@ -1128,12 +1168,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Editar - + Edits the active object Edita el objeto activo @@ -1141,30 +1181,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Editar Mejorado - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Edita el objeto seleccionado Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Crea una elipse. CTRL para ajustar @@ -1172,12 +1207,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder unir caras - + Creates a facebinder object from selected face(s) Crear un objecto facebinder a partir de cara(s) seleccionada(s) @@ -1185,12 +1220,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Terminar línea - + Finishes a line without closing it Termina una línea sin cerrarla @@ -1198,12 +1233,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Invertir Cota - + Flip the normal direction of a dimension Girar la dirección normal de una cota @@ -1211,12 +1246,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Reparar - + Heal faulty Draft objects saved from an earlier FreeCAD version Reparar objetos del boceto defectuosos guardados con una versión de FreeCAD anterior @@ -1224,12 +1259,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Unirse - + Joins two wires together Conecta dos alambres juntos @@ -1237,25 +1272,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Etiqueta - + Creates a label, optionally attached to a selected object or element Crea una etiqueta, opcionalmente ligada a un objeto o elemento seleccionado + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Línea - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crea una línea de 2 puntos. CTRL para forzar, SHIFT para restringir @@ -1263,12 +1311,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Reflejar - + Mirrors the selected objects along a line defined by two points Refleja los objetos seleccionados a lo largo de una línea definida por dos puntos @@ -1276,25 +1324,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Mueve los objetos seleccionados entre 2 puntos. CTRL para ajuste, SHIFT para restringir Draft_Offset - + Offset Equidistancia - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Crea una equidistancia al objeto activo. CTRL para forzar, SHIFT para restringir, ALT para copiar @@ -1302,12 +1350,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray matriz de copia - + Creates copies of a selected object along a selected path. Crea copias de un objeto seleccionado siguiendo una ruta seleccionada. @@ -1315,12 +1363,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punto - + Creates a point object Crea un objeto punto @@ -1328,12 +1376,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Formación sobre puntos - + Creates copies of a selected object on the position of points. Crea copias de un objeto seleccionado en la posición de los puntos. @@ -1341,12 +1389,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crea un polígono regular. CTRL para forzar, SHIFT para restringir @@ -1354,12 +1402,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rectángulo - + Creates a 2-point rectangle. CTRL to snap Crea un rectángulo dado por 2 puntos. CTRL para forzar @@ -1367,12 +1415,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Girar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Gira los objetos seleccionados. CTRL para forzar, SHIFT para restringir, ALT para crear una copia @@ -1380,12 +1428,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Escalar - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Escala los objetos seleccionados desde un punto base. CTRL para forzar, SHIFT para restringir, ALT para copiar @@ -1393,12 +1441,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Seleccionar grupo - + Selects all objects with the same parents as this group Selecciona todos los objetos con los mismos padres de este grupo @@ -1406,12 +1454,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Seleccionar plano - + Select a working plane for geometry creation Selecciona un plano de trabajo para crear geometría @@ -1419,12 +1467,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Crea un objeto proxy desde el plano de trabajo actual - + Create Working Plane Proxy Crear Proxy del plano de trabajo @@ -1432,12 +1480,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Vista de forma 2D - + Creates Shape 2D views of selected objects Crea vistas de formas 2D de los objetos seleccionados @@ -1445,12 +1493,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma a partir de texto... - + Creates text string in shapes. crear una cadena de texto en las formas. @@ -1458,12 +1506,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Mostrar barra de Ajuste - + Shows Draft snap toolbar Mostrar barra de herramientas Ajuste del Borrador @@ -1471,12 +1519,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Ajustar pendiente - + Sets the slope of a selected Line or Wire Ajusta la pendiente de una línea o alambre seleccionado @@ -1484,12 +1532,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angulos - + Snaps to 45 and 90 degrees points on arcs and circles magnetiza a 45 o 90 grados los puntos en arcos y circulos @@ -1497,12 +1545,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Se ajusta al centro de circunferencias y arcos @@ -1510,12 +1558,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensiones - + Shows temporary dimensions when snapping to Arch objects Muestra las dimensiones temporales cuando ajusta a objetos arcos @@ -1523,12 +1571,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punto final - + Snaps to endpoints of edges Se ajusta a los extremos de los bordes @@ -1536,12 +1584,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensión - + Snaps to extension of edges Se ajusta a la extensión de los bordes @@ -1549,12 +1597,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Rejilla - + Snaps to grid points Se ajusta a los puntos de la rejilla @@ -1562,12 +1610,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersección - + Snaps to edges intersections Se ajusta a las intersecciones de los bordes @@ -1575,17 +1623,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off encendido/apagado - + Activates/deactivates all snap tools at once Activa/desactiva todas las herramientas de ajuste a la vez - + Lock Bloquear @@ -1593,12 +1641,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punto medio - + Snaps to midpoints of edges Se ajusta a los puntos medios de los bordes @@ -1606,12 +1654,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Mas cercano - + Snaps to nearest point on edges Se ajusta al punto más cercano en los bordes @@ -1619,12 +1667,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Se ajusta a direcciones ortogonales y a 45 grados @@ -1632,12 +1680,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralelo - + Snaps to parallel directions of edges Se anexa a direcciones paralelas de los bordes @@ -1645,12 +1693,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Se anexa a puntos perpendiculares en los bordes @@ -1658,12 +1706,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Especial - + Snaps to special locations of objects Encajar a ubicaciones especiales de objectos @@ -1671,12 +1719,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plano de Trabajo - + Restricts the snapped point to the current working plane Restringe el punto de ajuste al plano de trabajo actual @@ -1684,12 +1732,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Dividir - + Splits a wire into two wires Divide un alambre en dos alambres @@ -1697,12 +1745,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Estirar - + Stretches the selected objects Estirar los objetos seleccionados @@ -1710,12 +1758,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Crea una anotación. CTRL para forzar @@ -1723,12 +1771,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Conmuta el modo de construcción para los próximos objetos. - + Toggle Construction Mode Cambiar a modo de construcción @@ -1736,12 +1784,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Cambiar modo continuo - + Toggles the Continue Mode for next commands. Activa o desactiva el modo de continuar para los comandos siguientes. @@ -1749,12 +1797,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Alternar modo de exhibición - + Swaps display mode of selected objects between wireframe and flatlines Intercambia el modo de exhibir los objectos selecionados entre modelo de alambre and líneas planas @@ -1762,22 +1810,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Activar/Desactivar rejilla - + Toggles the Draft grid on/off Activa/Desactiva la rejilla - + Grid Rejilla - + Toggles the Draft grid On/Off Alterna de la cuadrícula de trazado On/Off @@ -1785,12 +1833,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Recortar o extender - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Recorta o extiende el objeto seleccionado, solo se puede aplicar a caras. CTRL ajustes, SHIFT restringe el segmento actual o normal, ALT invierte @@ -1798,12 +1846,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Deshacer el último segmento - + Undoes the last drawn segment of the line being drawn Deshace el último segmento de la línea que se está dibujando @@ -1811,51 +1859,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Aumentar - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Se une los objetos seleccionados en uno, o convierte los alambres cerrados en caras llenas o une caras - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Agrega un VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crea un DraftWire (DWire) de puntos múltiples. CTRL para ajuste, Mayús para restricción + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Alambre a B-spline - + Converts between Wire and B-spline Convierte entre el alambre y B-spline @@ -1863,22 +1898,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Configuración general de Croquizado - + This is the default color for objects being drawn while in construction mode. Este es el color predeterminado para objetos que están siendo dibujados en el modo de construcción. - + This is the default group name for construction geometry Este es el nombre del grupo predeterminado para la geometría de la construcción - + Construction Construcción @@ -1888,37 +1923,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainPreservar color y ancho de línea presentes de una session a otra - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Si esto está marcado, el modo de copiar se preservará de un comando a otro; de otro manera, los comandos siempre empezarán en el modo de "sin-copiar" - + Global copy mode Modo de copia global - + Default working plane Plano de trabajo predeterminado - + None Ninguno - + XY (Top) XY (Superior) - + XZ (Front) XZ (Frontal) - + YZ (Side) YZ (Lateral) @@ -1986,12 +2021,12 @@ such as "Arial:Bold" Opciones generales - + Construction group name Nombre de grupo de construcción - + Tolerance Tolerancia @@ -2016,22 +2051,22 @@ such as "Arial:Bold" Aquí puede especificar un directorio que contenga archivos SVG con <pattern> definiciones para añadir a los patrones estándar de impresion de sombreado - + Draft interface mode Modo de interfaz de boceto - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Este es el modo de IU en el que funciona el módulo Borrador: el modo barra de herramientas situará todas las características del Borrador en una barra de herramientas independiente, mientras que el modo de barra de tareas se utilizará el sistema Vista de Tareas de FreeCAD para todos sus interacciones con el usuario - + Toolbar Barra de herramientas - + Taskview Vista de tarea @@ -2061,12 +2096,12 @@ such as "Arial:Bold" Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalmente, después de copiar objetos, las copias quedan seleccionadas. Si esta opción está activada, los objetos base serán seleccionados en su lugar. - + Select base objects after copying Seleccione los objetos base después de copiar @@ -2101,7 +2136,7 @@ such as "Arial:Bold" Las líneas principales se dibujarán más gruesas. Especifique aquí cuántos cuadros dejar entre líneas principales. - + Internal precision level Nivel de precisión interno @@ -2216,12 +2251,12 @@ such as "Arial:Bold" Interpretar la línea blanca como negra - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. De estar marcada, las herramientas de dibujo crearán primitivas tipo parte en lugar de objetos de dibujo, cuando sea posible. - + Use Part Primitives when available Utiliza Primitivos del módulo Pieza cuando estén disponibles @@ -2241,12 +2276,7 @@ such as "Arial:Bold" Siempre ajustar (desactivar modo de ajuste) - - Construction geometry - Geometría de construcción - - - + Construction geometry color Color de los elementos auxiliares @@ -2386,7 +2416,7 @@ such as "Arial:Bold" Seleccione un archivo de fuente - + Fill objects with faces whenever possible Rellenar objetos con caras siempre que sea posible @@ -2676,7 +2706,7 @@ such as "Arial:Bold" Actualización automática (sólo para el importador antiguo) - + Prefix labels of Clones with: Prefijo de etiquetas de Clones con: @@ -2714,7 +2744,7 @@ El factor es la conversión entre la unidad del archivo DXF y milímetros. Ej: p Este es el método elegido para importar el color de objeto SVG en FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Si esta casilla está seleccionada, los objetos aparecerán como rellenos por defecto. De lo contrario, aparecen como estructura alámbrica @@ -2794,17 +2824,7 @@ El factor es la conversión entre la unidad del archivo DXF y milímetros. Ej: p Si esto comprueba, los objetos desde las mismas capas se unirán en bloques del proyecto, cambiando la pantalla más rápido, pero los hace menos fácilmente editables - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Si se marca esta opción, se mostrarán instrucciones paso a paso en la ventana de resultados cuando se ejecuten los comandos Draft - - - - Verbose command line mode - Modo de línea de comandos detallado - - - + When drawing lines, set focus on Length instead of X coordinate Al dibujar líneas, ajustar el foco en longitud en vez de coordenadas X @@ -2884,710 +2904,857 @@ El factor es la conversión entre la unidad del archivo DXF y milímetros. Ej: p Segmento de Max Spline: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + El número de decimales en las operaciones de coordenadas internas (por ejemplo, 3 = 0.001). Los valores entre 6 y 8 generalmente se consideran el mejor rango entre los usuarios de FreeCAD. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Este es el valor utilizado por funciones que utilizan una tolerancia. +Valores con diferencias por debajo de este valor serán tratados como iguales. Este valor será obsoleto pronto, así que el nivel de precisión superior controla ambos. Use legacy python exporter - Use legacy python exporter + Usar exportador de python antiguo + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometría de Construcción + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativo + + + + R + R + + + + Continue + Continuar + + + + T + T + + + + Close + Cerrar + + + + O + O + + + + Copy + Copiar + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Relleno + + + + L + L + + + + Exit + Salir + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Longitud + + + + H + H + + + + Wipe + Limpieza + + + + W + W + + + + Set WP + Configurar WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restringir X + + + + X + X + + + + Restrict Y + Restringir Y + + + + Y + Y + + + + Restrict Z + Restringir Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Ajuste del borrador - - - Draft creation tools - Herramientas de creación de bosquejo - - - - Draft modification tools - Herramientas de modificación de bosquejo - - - - Utilities - Utilidades - - - - Wire tools - Herramientas de alambre - - - - Snapping - Ajuste - draft - + not shape found forma no encontrada - + All Shapes must be co-planar Todas las formas deben ser coplanares - + The given object is not planar and cannot be converted into a sketch. El objeto no es plano y no se puede convertir en un croquis. - + Unable to guess the normal direction of this object No se puede adivinar la dirección normal de este objeto - + Draft Command Bar Barra de comandos del borrador - + Toggle construction mode Cambiar a modo de construcción - + Current line color Color de línea actual - + Current face color Color de cara actual - + Current line width Ancho de línea actual - + Current font size Tamaño de fuente actual - + Apply to selected objects Aplicar a los objetos seleccionados - + Autogroup off Desactivar Auto-agrupar - + active command: Comando activo: - + None Ninguno - + Active Draft command Activar comando de boceto - + X coordinate of next point Coordenada X del siguiente punto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y del siguiente punto - + Z coordinate of next point Coordenada Z del siguiente punto - + Enter point Suministrar punto - + Enter a new point with the given coordinates Suministre un nuevo punto con las coordenadas dadas - + Length Longitud - + Angle Ángulo - + Length of current segment Longitud del segmento actual - + Angle of current segment Ángulo del segmento actual - + Radius Radio - + Radius of Circle radio de la circunferencia - + If checked, command will not finish until you press the command button again Si está activado, el comando no terminará hasta que vuelva a pulsar el botón de comando - + If checked, an OCC-style offset will be performed instead of the classic offset Si marcado, una offset estilo OCC será realizada en vez del offset clásico - + &OCC-style offset Salida estilo OCC - + Add points to the current object Agregar puntos al objeto actual - + Remove points from the current object Eliminar puntos del objeto actual - + Make Bezier node sharp Hacer nodo Bezier filoso - + Make Bezier node tangent Hacer nodo Bézier tangente - + Make Bezier node symmetric Hacer nodo Bézier simétrico - + Sides Lados - + Number of sides Número de lados - + Offset Equidistancia - + XY (top) XY (arriba) - - Select XY plane - Seleccionar plano XY - - - + XZ (front) XZ (delantero) - - Select XZ plane - Seleccionar plano XZ - - - + YZ (side) YZ (lado) - - Select YZ plane - Seleccionar plano YZ - - - + View Vista - - Select plane perpendicular to the current view - Seleccionar plano perpendicular a la vista actual - - - + Auto Auto - - Do not project points to a drawing plane - No proyectar puntos al plano de dibujo - - - + Text string to draw Cadena de texto para dibujar - + String Cadena de texto - + Height of text Altura de texto - + Height Altura - + Intercharacter spacing Espacio entre caracteres - + Tracking Seguimiento - + Full path to font file: Ruta de acceso completa al archivo de fuente: - + Open a FileChooser for font file Abrir un Selector de ficheros para el archivo de fuente - + Grid spacing Espaciado de la cuadrícula - + The spacing between the grid lines El espaciado entre las líneas de cuadrícula - + Main line every Linea principal cada - + The number of lines between main lines El número de líneas entre las líneas principales - + Center plane on view Plano central en vista - - Select Plane - Seleccionar plano - - - + Line Línea - + DWire DWire - + Circle Circunferencia - + Center X Centro X - + Arc Arco - + Point Punto - + Label Etiqueta - + Distance Distancia - + Trim Recortar - + Pick Object Designar objeto - + Edit Editar - + Global X Global X - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Valor no válido de tamaño. Usando 200.0. - + Invalid Tracking value. Using 0. Valor de seguimiento no válido. Usando 0. - + Please enter a text string. Por favor, introduzca una cadena de texto. - + Select a Font file Seleccione un archivo de fuente - + Please enter a font file. Por favor, introduzca un fichero de fuente. - + Autogroup: Auto-agrupar: - + Faces Caras - + Remove Quitar - + Add Añadir - + Facebinder elements Elementos Facebinder - + Create Line Crear línea - - Pick next point: - - Designar el siguiente punto: - - - - + Convert to Wire Convertir en Alambre - + BSpline BSpline - + BezCurve CurvaBezier - + Create BezCurve Crear Curva Bezier - + Rectangle Rectángulo - + Create Plane Crear Plano - + Create Rectangle Crear Rectángulo - + Create Circle Crear Círculo - + Create Arc Crear Arco - + Start Angle Ángulo inicial - + Aperture Apertura - + Polygon Polígono - + Create Polygon Crear Polígono - + Ellipse Elipse - + Create Ellipse Crear elipse - + Text Texto - + Create Text Crear texto - + Dimension Cota - + Create Dimension Crear dimensión - + ShapeString etiqueta - + Create ShapeString Crear etiqueta - + Copy Copiar - + Move Mover - + Change Style Cambiar estilo - + Rotate Girar - - Cannot offset this object type - - No se puede compensar este tipo de objeto - - - + Stretch Estirar - + Upgrade Aumentar - + Downgrade Reducir - + Selection is not a Knot La selección no es un nudo - + Convert to Sketch Convertir a Croquis - + Convert to Draft Convertir a Boceto - + Convert Convertir - + Array Matriz - + Create Point Crear Punto - + Mirror Reflejar - + &Draft &Bosquejo @@ -3609,179 +3776,179 @@ O descargar estas bibliotecas manualmente, como se explica en https://github.com Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si. - + Draft.makeBSpline: not enough points Draft.makeBSpline: no hay suficientes puntos - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Extremos iguales cerrado forzado - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Pointslist no válida - + No object given Ningún objeto dado - + The two points are coincident Los dos puntos son coincidentes - + Found groups: closing each open object inside Encuentran grupos: cerrar cada objeto abierto dentro de - + Found mesh(es): turning into Part shapes Encontrada(s) malla(s): convertir formas en pieza - + Found 1 solidifiable object: solidifying it Encontrado 1 objeto solidificable: solidificándolo - + Found 2 objects: fusing them Encontrados 2 objetos: fusionando - + Found several objects: creating a shell Se encontraron varios objetos: creando un armazón - + Found several coplanar objects or faces: creating one face Se encontraron varios objetos o caras coplanares: creando una cara - + Found 1 non-parametric objects: draftifying it Encontrado 1 objeto no paramétrico: diseñándolo - + Found 1 closed sketch object: creating a face from it Encontrado 1 boceto de objeto cerrado: crear una cara de él - + Found 1 linear object: converting to line Se encontró 1 objeto linear: convirtiendo a línea - + Found closed wires: creating faces Se encontraron alambres cerrados: creando caras - + Found 1 open wire: closing it Encontrado 1 alambre abierto: cierre - + Found several open wires: joining them Encontrados varios alambres abiertos: uniéndolos - + Found several edges: wiring them Encontradas varias aristas: uniéndolas - + Found several non-treatable objects: creating compound Encontraron varios objetos no tratables: crear compuesto - + Unable to upgrade these objects. No se puede actualizar estos objetos. - + Found 1 block: exploding it Encontrado 1 bloque: explotarlo - + Found 1 multi-solids compound: exploding it Encuentrado 1 compuesto de múltiples sólido: explotarlo - + Found 1 parametric object: breaking its dependencies Encontrado 1 objeto paramétrico: rompiendo sus dependencias - + Found 2 objects: subtracting them Encontrados 2 objetos: restarlos - + Found several faces: splitting them Encontradas varias caras: partirlas - + Found several objects: subtracting them from the first one Encontrados varios objetos: restar de la primera - + Found 1 face: extracting its wires Encontrada 1 cara: extrayendo sus alambres - + Found only wires: extracting their edges Encontrados solamente alambres: extrayendo sus aristas - + No more downgrade possible No más posible downgrade - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: cerrado con el mismo punto de la primera/última. Geometría no actualizado. - + No point found No se ha encontrado punto - + ShapeString: string has no wires ShapeString: la cadena no tiene alambres - + Relative Relativo - + Continue Continuar - + Close Cerrar @@ -3826,7 +3993,7 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Restringir Z - + Select edge Seleccionar arista @@ -3841,7 +4008,7 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Modo longitud - + Wipe Limpieza @@ -3856,513 +4023,636 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Objeto de ajuste de ciclo - + Check this to lock the current angle Mira para bloquear el ángulo actual - + Coordinates relative to last point or absolute Coordenadas en relación con el último punto o absoluto - + Filled Relleno - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Compruebe si este objeto debe aparecer como relleno, de lo contrario aparecerá como estructura alámbrica - - - + Finish Terminado - + Finishes the current drawing or editing operation Termina el dibujo actual u operación de edición - + &Undo (CTRL+Z) &Deshacer (Ctrl+Z) - + Undo the last segment Deshacer el tramo anterior - + Finishes and closes the current line Finalizar y cerrar la línea actual - + Wipes the existing segments of this line and starts again from the last point Limpia los segmentos existentes de esta línea y empieza de nuevo desde el último punto - + Set WP Configurar WP - + Reorients the working plane on the last segment Reorienta el plano de trabajo en el último segmento - + Selects an existing edge to be measured by this dimension Selecciona una arista existente para ser medido por esta cota - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Si está marcado, los objetos se copiarán en lugar de moverlos. Preferencias -> Draft-> Modo de copia global para mantener este modo en los siguientes comandos - - options - opciones - - - + Default Por defecto - + Pick a face to define the drawing plane Escoge una cara para definir el plano de dibujo - - First point: - Primer punto: - - - - Closing - Cerrando - - - + Create Wire Crear un Wire - - Removing last point - Eliminando el último punto - - - - Next point: - Siguiente punto: - - - - Restarting from - Reiniciando desde - - - + Unable to create a Wire from selected objects No se puede crear un Alambre de objetos seleccionados - + Spline has been closed Spline se ha cerrado - + Last point has been removed El Último punto se ha eliminado - - Pick next point, or Finish (shift-F) or close (o): - Escoja el siguiente punto, o acabado (shift-F) o cerrar (o): - - - + Create B-spline Crear B-spline - + Bezier curve has been closed La curva Bezier ha sido cerrada - - Pick first point: - Elija el punto de inicio: - - - - Pick opposite point: - Elija el punto opuesto: - - - - Pick center point: - Elija el punto central: - - - - Pick radius: - Elija el radio: - - - - Pick start angle: - Elija el punto de inicio del ángulo: - - - - Pick aperture: - Elija la apertura: - - - - Aperture angle: - Ángulo de apertura: - - - - Pick location point: - Escoja el punto de Ubicación: - - - + Edges don't intersect! ¡No se cruzan las aristas! - + Pick ShapeString location point: Escoja el punto de ubicación de ShapeString: - + Select an object to move Seleccione un objeto para mover - - Pick start point: - Elija el punto de inicio: - - - - Pick end point: - Elija el punto final: - - - + Select an object to rotate Seleccione un objeto para girar - - Pick rotation center: - Elija un punto de rotación: - - - - Pick base angle: - Elija la base del ángulo: - - - - Pick rotation angle: - Elija un punto de rotación: - - - + Select an object to offset Seleccione un objeto para desplazar - + Offset only works on one object at a time El desplazamiento sólo funciona con un objeto a la vez - + Sorry, offset of Bezier curves is currently still not supported Lo sentimos, desplazamiento de curvas Bézier actualmente todavía no se admite - - Pick distance: - Elija distancia: - - - + Select an object to stretch Seleccione un objeto para estirar - - Pick first point of selection rectangle: - Elija el primer punto de selección del rectángulo: - - - - Pick opposite point of selection rectangle: - Elija el punto opuesto de selección del rectángulo: - - - - Pick start point of displacement: - Elija el punto inicial de desplazamiento: - - - - Pick end point of displacement: - Elija el punto final de desplazamiento: - - - + Turning one Rectangle into a Wire Convertir un rectángulo en un alambre - + Select an object to join Seleccione un objeto para unir - + Join Unirse - + Select an object to split Seleccione un objeto para separar - + Select an object to upgrade Seleccione un objeto para actualizar - + Select object(s) to trim/extend Seleccione objeto(s) a recortar/extender - + Unable to trim these objects, only Draft wires and arcs are supported Incapaz de recortar estos objetos, sólo proyecto de alambres y arcos son compatibles - + Unable to trim these objects, too many wires Incapaz de recortar estos objetos, demasiados alambres - + These objects don't intersect Estos objetos no intersectan - + Too many intersection points Demasiados puntos de intersección - + Select an object to scale Seleccione un objeto para escalar - - Pick base point: - Escoja el punto base: - - - - Pick reference distance from base point: - Escoja distancia de referencia desde punto de partida: - - - - Pick new distance from base point: - Escoja nueva distancia del punto base: - - - + Select an object to project Seleccione un objeto para proyecto - - This object type is not editable - Este tipo de objeto no es editable - - - + Please select only one object Por favor, seleccione un único objeto - + Select a Draft object to edit Seleccione un objeto de proyecto para editar - + Active object must have more than two points/nodes Objeto activo debe tener más de dos puntos/nodos - + Endpoint of BezCurve can't be smoothed Extremo de BezCurve no puede ser alisado - + Select an object to convert Seleccione un objeto para convertir - + Select an object to array Seleccione un objeto matriz - + Please select base and path objects Por favor, seleccione objetos base y trayectoria - + Please select base and pointlist objects Por favor, seleccione los objetos base y lista de puntos - + Select an object to clone Seleccione un objeto para clonar - + Select face(s) on existing object(s) Seleccione cara(s) en objetos existente(s) - + Select an object to mirror Seleccione un objeto para reflejar - - Pick start point of mirror line: - Elija el punto de inicio de la línea de reflejo: - - - - Pick end point of mirror line: - Elija el punto final de la línea de reflejo: - - - + This tool only works with Wires and Lines Esta herramienta sólo funciona con los alambres y líneas - - - Pick target point: - Escoja el punto de mira: - - - - Pick endpoint of leader line: - Escoja el punto final de línea directriz: - - - - Pick text position: - Escoja la posición del texto: - ODA (formerly Teigha) File Converter not found, DWG support is disabled No se encontró el convertidor de archivos ODA (anteriormente Teigha), el soporte DWG está deshabilitado - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s comparte una base con %d otros objetos. Por favor, verifique si desea modificar esto. Subelement mode - Subelement mode + Modo Subelemento - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Alternar edición de radio y ángulos de arco - + Modify subelements - Modify subelements + Modificar subelementos - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Si está marcado, los subelementos serán modificados en lugar de objetos enteros - + CubicBezCurve - CubicBezCurve + CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Algunos subelementos no se pudieron mover. - + Scale Escalar - + Some subelements could not be scaled. - Some subelements could not be scaled. + Algunos subelementos no se pudieron escalar. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + El croquis de base de muro es demasiado complejo para editar: se sugiere editar directamente el croquis + + + + Top + Planta + + + + Front + Alzado + + + + Side + Lado + + + + Current working plane + Plano de trabajo actual + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatico + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotación + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Seleccione un objeto para editar + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Calado + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilidades + + + + Wire tools + Herramientas de alambre + + + + Snapping + Ajuste diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index d5fb31d630..ea085c9764 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index c04a3426da..c5861d58dd 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Itzaleztadura-eredu bat definitzen du - + Sets the size of the pattern Ereduaren tamaina ezartzen du - + Startpoint of dimension Kotaren hasierako puntua - + Endpoint of dimension Kotaren amaierako puntua - + Point through which the dimension line passes Kota-lerroak igarotzen duen puntua - + The object measured by this dimension Kota honek neurtzen duen objektua - + The geometry this dimension is linked to Kota honi zein geometriari estekatuta dagoen - + The measurement of this dimension Kota honen neurria - + For arc/circle measurements, false = radius, true = diameter Arkuen/zirkuluen neurketetarako, gezurra = erradioa, egia = diametroa - + Font size - Letra-tipoaren tamaina + Letra-tamaina - + The number of decimals to show Erakutsiko den dezimal kopurua - + Arrow size Gezi-tamaina - + The spacing between the text and the dimension line Testuaren eta kota-lerroaren arteko tartea - + Arrow type Gezi mota - + Font name Letra-tipoaren izena - + Line width Lerro-zabalera - + Line color Lerro-kolorea - + Length of the extension lines Luzatze-lerroen luzera - + Rotate the dimension arrows 180 degrees Biratu kota-geziak 180 gradu - + Rotate the dimension text 180 degrees Biratu kota-testua 180 gradu - + Show the unit suffix Erakutsi unitate-atzizkia - + The position of the text. Leave (0,0,0) for automatic position Testuaren posizioa. Utzi (0,0,0) posizio automatikorako - + Text override. Use $dim to insert the dimension length Testuaren gainidazketa. Erabili $dim kotaren luzera txertatzeko - + A unit to express the measurement. Leave blank for system default Neurria adierazteko unitate bat, Utzi hutsik sistemaren balio lehenetsia erabiltzeko - + Start angle of the dimension Kotaren hasierako angelua - + End angle of the dimension Kotaren amaierako angelua - + The center point of this dimension Kota honen erdiko puntua - + The normal direction of this dimension Kota honen norabide normala - + Text override. Use 'dim' to insert the dimension length Testuaren gainidazketa. Erabili 'dim' kotaren luzera txertatzeko - + Length of the rectangle Laukizuzenaren luzera - + Radius to use to fillet the corners Izkinak biribiltzeko erabiliko den erradioa - + Size of the chamfer to give to the corners Izkinei emango zaien alakaren tamaina - + Create a face Sortu aurpegi bat - + Defines a texture image (overrides hatch patterns) Testura-irudi bat definitzen du (itzaleztadura-ereduak gainidazten ditu) - + Start angle of the arc Arkuaren hasierako angelua - + End angle of the arc (for a full circle, give it same value as First Angle) Arkuaren amaierako angelua (zirkulu osoa sortzeko, eman hasierako angeluaren balio bera) - + Radius of the circle Zirkuluaren erradioa - + The minor radius of the ellipse Elipsearen erradio txikia - + The major radius of the ellipse Elipsearen erradio handia - + The vertices of the wire Alanbrearen erpinak - + If the wire is closed or not Alanbrea itxita dagoen ala ez - + The start point of this line Lerro honen hasierako puntua - + The end point of this line Lerro honen amaierako puntua - + The length of this line Lerro honen luzera - + Create a face if this object is closed Sortu aurpegi bat objektu hau itxita badago - + The number of subdivisions of each edge Ertz bakoitzaren zatiketa kopurua - + Number of faces Aurpegi kopurua - + Radius of the control circle Kontrol-zirkuluaren erradioa - + How the polygon must be drawn from the control circle Nola marraztuko den poligonoa kontrol-zirkulutik - + Projection direction Proiekzio-norabidea - + The width of the lines inside this object Objektu honen barruko lerroen zabalera - + The size of the texts inside this object Objektu honen barruko testuen tamaina - + The spacing between lines of text Testu-lerroen arteko tartea - + The color of the projected objects Proiektatutako objektuen kolorea - + The linked object Estekatutako objektua - + Shape Fill Style Formaren betegarri-estiloa - + Line Style Lerro-estiloa - + If checked, source objects are displayed regardless of being visible in the 3D model Markatuta badago, iturburu-objektuak erakutsi egingo dira, 3D ereduan ikusgarriak izan zein ez - + Create a face if this spline is closed Sortu aurpegi bat spline hau itxita badago - + Parameterization factor Parametrizazio-faktorea - + The points of the Bezier curve Bezier kurbaren puntuak - + The degree of the Bezier function Bezier funtzioaren gradua - + Continuity Jarraitutasuna - + If the Bezier curve should be closed or not Bezier kurbak itxita egon behar duen ala ez - + Create a face if this curve is closed Sortu aurpegi bat kurba hau itxita badago - + The components of this block Bloke honen osagaiak - + The base object this 2D view must represent 2D bista honek irudikatu behar duen oinarri-objektua - + The projection vector of this object Objektu honen proiekzio-bektorea - + The way the viewed object must be projected Bistaratutako objektua nola proiektatu behar den - + The indices of the faces to be projected in Individual Faces mode Banakako aurpegien moduan proiektatuko diren aurpegien indizeak - + Show hidden lines Erakutsi ezkutuko lerroak - + The base object that must be duplicated Bikoiztu behar den oinarri-objektua - + The type of array to create Sortuko den matrize mota - + The axis direction Ardatzaren norabidea - + Number of copies in X direction Kopia kopurua X norabidean - + Number of copies in Y direction Kopia kopurua Y norabidean - + Number of copies in Z direction Kopia kopurua Z norabidean - + Number of copies Kopia kopurua - + Distance and orientation of intervals in X direction Tarteen distantzia eta orientazioa X norabidean - + Distance and orientation of intervals in Y direction Tarteen distantzia eta orientazioa Y norabidean - + Distance and orientation of intervals in Z direction Tarteen distantzia eta orientazioa Z norabidean - + Distance and orientation of intervals in Axis direction Tarteen distantzia eta orientazioa ardatzaren norabidean - + Center point Puntu zentrala - + Angle to cover with copies Kopiekin estaliko den angelua - + Specifies if copies must be fused (slower) Kopiak fusionatu behar diren ala ez zehazten du (motelagoa) - + The path object along which to distribute objects Objektuak banatzeko erabiliko den bide-objektua - + Selected subobjects (edges) of PathObj PathObj objektuan hautatutako azpiobjektuak (ertzak) - + Optional translation vector Aukerako translazio-bektorea - + Orientation of Base along path Oinarriaren orientazioa bidearen luzeran - + X Location X kokapena - + Y Location Y kokapena - + Z Location Z kokapena - + Text string Testu-katea - + Font file name Letra-tipoaren fitxategiaren izena - + Height of text Testuaren altuera - + Inter-character spacing Karaktere arteko espazioa - + Linked faces Estekatutako aurpegiak - + Specifies if splitter lines must be removed Lerro zatitzaileak kendu behar diren ala ez adierazten du - + An optional extrusion value to be applied to all faces Aurpegi guztiei aplikatuko zaien aukerako estrusio-balio bat - + Height of the rectangle Laukizuzenaren altuera - + Horizontal subdivisions of this rectangle Laukizuzen honen azpizatiketa horizontalak - + Vertical subdivisions of this rectangle Laukizuzen honen azpizatiketa bertikalak - + The placement of this object Objektu honen kokapena - + The display length of this section plane Sekzio-plano honen bistaratze-luzera - + The size of the arrows of this section plane Sekzio-plano honen gezien tamaina - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Mozte-lerroen eta mozte-aurpegien moduetarako, honek mozte-tokian uzten ditu aurpegiak - + The base object is the wire, it's formed from 2 objects Oinarri-objektua 2 objekturekin eratutako alanbrea da - + The tool object is the wire, it's formed from 2 objects Tresna-objektua 2 objekturekin eratutako alanbrea da - + The length of the straight segment Segmentu zuzenaren luzera - + The point indicated by this label Etiketa honek adierazten duen puntua - + The points defining the label polyline Etiketa-polilerroa definitzen duten puntuak - + The direction of the straight segment Segmentu zuzenaren norabidea - + The type of information shown by this label Etiketa honek erakusten duen informazio mota - + The target object of this label Etiketa honen helburu-objektua - + The text to display when type is set to custom Bistaratuko den testua mota pertsonalizatua denean - + The text displayed by this label Etiketa honek bistaratzen duen testua - + The size of the text Testuaren tamaina - + The font of the text Testuaren letra-tipoa - + The size of the arrow Geziaren tamaina - + The vertical alignment of the text Testuaren lerrokatze bertikala - + The type of arrow of this label Etiketa honen gezi mota - + The type of frame around the text of this object Objektu honen testuaren inguruko marko mota - + Text color Testu-kolorea - + The maximum number of characters on each line of the text box Testu-kutxako lerro bakoitzaren karaktere kopuru maximoa - + The distance the dimension line is extended past the extension lines Kota-lerroa luzapen-lerroaz haratago luzatzen den distantzia - + Length of the extension line above the dimension line Luzapen-lerroak kota-lerroaren gainetik duen luzera - + The points of the B-spline B-spline kurbaren puntuak - + If the B-spline is closed or not B-spline kurba itxita dagoen ala ez - + Tessellate Ellipses and B-splines into line segments Teselatu elipseak eta B-spline elementuak lerro-segmentuetara - + Length of line segments if tessellating Ellipses or B-splines into line segments Lerro-segmentuen luzera, elipseak edo B-spline kurbak lerro-segmentuetara teselatzen badira - + If this is True, this object will be recomputed only if it is visible Hau egia bada, objektu hau birkalkulatuko da ikusgai badago soilik - + Base Oinarria - + PointList Puntu-zerrenda - + Count Zenbaketa - + The objects included in this clone Klon honetan sartutako objektuak - + The scale factor of this clone Klon honen eskala-faktorea - + If this clones several objects, this specifies if the result is a fusion or a compound Zenbait objektu klonatzen baditu, emaitza fusio bat den edo konposatu bat den zehazten du - + This specifies if the shapes sew Honek zehazten du formak josten diren - + Display a leader line or not Bistaratu gida-marra bat edo ez - + The text displayed by this object Objektu honek bistaratzen duen testua - + Line spacing (relative to font size) Lerroartea (letra-tipoarekiko) - + The area of this object - The area of this object + Objektuaren area - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Kota-ikur bat erakusten du alanbrearen amaieran - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusionatu mota eta material bereko hormak eta egiturak + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Malda - + Scale Eskala - + Writing camera position Kamera-kokapena idazten - + Writing objects shown/hidden state Objektuen ezkutuko/bistako egoera idazten - + X factor X faktorea - + Y factor Y faktorea - + Z factor Z faktorea - + Uniform scaling Eskalatze uniformea - + Working plane orientation Laneko planoaren orientazioa @@ -781,20 +816,25 @@ Instalatu DXF liburutegiaren gehigarria eskuz 'Tresnak -> Gehigarri-kudeatzailea' menutik - + This Wire is already flat Alanbre hau dagoeneko laua da - + Pick from/to points Aukeratu puntuetatik/puntuetara - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Hautatutako alanbreei/lerroei emango zaien malda: 0 = horizontala, 1 = 45 gradu gorantz, -1 = 45 gradu beherantz + + + Create a clone + Sortu klon bat + DraftShapeStringGui @@ -846,28 +886,28 @@ Instalatu DXF liburutegiaren gehigarria eskuz Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Sartu koordenatuak edo hautatu puntua saguarekin. Reset 3d point selection - Reset 3d point selection + Berrezarri 3d puntuaren hautapena Reset Point - Reset Point + Berrezarri puntua Draft_AddConstruction - + Add to Construction group Gehitu eraikuntza taldeari - + Adds the selected objects to the Construction group Hautatutako objektuak eraikuntza taldeari gehitzen dizkio @@ -875,12 +915,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_AddPoint - + Add Point Gehitu puntua - + Adds a point to an existing Wire or B-spline Puntu bat gehitzen dio lehendik dagoen alanbre edo B-spline bati @@ -888,12 +928,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_AddToGroup - + Move to group... Mugitu taldera... - + Moves the selected object(s) to an existing group Hautatutako objektua(k) lehendik dagoen talde batera mugitzen d(it)u @@ -901,12 +941,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_ApplyStyle - + Apply Current Style Aplikatu uneko estiloa - + Applies current line width and color to selected objects Uneko lerro-zabalera eta -kolorea aplikatzen dizkio hautatutako objektuei @@ -914,46 +954,46 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_Arc - + Arc Arkua - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Arku bat sortzen du erdiko puntu bat eta erradioa erabilita. Ctrl atxikitzeko, Shift murrizteko Draft_ArcTools - + Arc tools - Arc tools + Arku-tresnak Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arkuaren 3 puntu - + Creates an arc by 3 points - Creates an arc by 3 points + Arku bat sortzen du 3 puntu erabilita Draft_Array - + Array Matrizea - + Creates a polar or rectangular array from a selected object Matrize polarra edo laukizuzena sortzen du hautatutako objektu batetik @@ -961,12 +1001,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_AutoGroup - + AutoGroup Talde automatikoa - + Select a group to automatically add all Draft & Arch objects to Hautatu talde bat, hari automatikoki zirriborro- eta arkitektura-objektu guztiak gehitzeko @@ -974,12 +1014,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_BSpline - + B-spline B-Spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Puntu anitzeko B-spline bat sortzen du. Ctrl atxikitzeko, Shift murrizteko @@ -987,12 +1027,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_BezCurve - + BezCurve Bezier kurba - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Bezier kurba bat sortzen du. Ctrl atxikitzeko, Shift murrizteko @@ -1000,20 +1040,20 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_BezierTools - + Bezier tools - Bezier tools + Bezier tresnak Draft_Circle - + Circle Zirkulua - + Creates a circle. CTRL to snap, ALT to select tangent objects Zirkulu bat sortzen du. Ctrl atxikitzeko, Alt objektu tangenteak hautatzeko @@ -1021,12 +1061,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_Clone - + Clone Klonatu - + Clones the selected object(s) Hautatutako objektua(k) klonatzen d(it)u @@ -1034,12 +1074,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_CloseLine - + Close Line Itxi lerroa - + Closes the line being drawn Marrazten ari den lerroa ixten du @@ -1047,27 +1087,27 @@ Instalatu DXF liburutegiaren gehigarria eskuz Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Bezier kurba kubiko bat sortzen du +Klik eta arrastatu kontrol-puntuak definitzeko. Ctrl atxikitzeko, Shift murrizteko Draft_DelPoint - + Remove Point Kendu puntua - + Removes a point from an existing Wire or B-spline Puntu bat kentzen du lehendik dagoen alanbre edo B-spline batetik @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Kota - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Kota bat sortzen du. Ctrl atxikitzeko, Shift murrizteko, Alt segmentu bat hautatzeko @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Degradatu - + Explodes the selected objects into simpler objects, or subtracts faces Hautatutako objektua objektu sinpleagoetara lehertzen du, edo aurpegiak kentzen ditu @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Zirriborrotik krokisera - + Convert bidirectionally between Draft and Sketch objects Bihurtu zirriborro-objektuak krokis-objektu, eta alderantziz @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Marrazkia - + Puts the selected objects on a Drawing sheet Hautatutako objektuak marrazki-orri batean ipintzen ditu @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Editatu - + Edits the active object Objektu aktiboa editatzen du @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Edizio hobetua - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Editatu hautatutako puntuak Draft_Ellipse - + Ellipse Elipsea - + Creates an ellipse. CTRL to snap Elipse bat sortzen du. Ctrl atxikitzeko @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Aurpegi-zorroa - + Creates a facebinder object from selected face(s) Aurpegi-zorro objektu bat sortzen du hautatutako aurpegia(k) erabiliz @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Amaitu lerroa - + Finishes a line without closing it Lerro bat amaitzen du hura itxi gabe @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Irauli kota - + Flip the normal direction of a dimension Irauli kota baten norabide normala @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Konpondu - + Heal faulty Draft objects saved from an earlier FreeCAD version Konpondu FreeCAD bertsio zaharrago batekin gordetako zirriborro-objektuak @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Elkartu - + Joins two wires together Bi alanbre elkartzen ditu @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Etiketa - + Creates a label, optionally attached to a selected object or element Etiketa bat sortzen du, nahi bada hautatutako objektu edo elementu bati erantsita + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Lerroa - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Bi puntuko lerro bat sortzen du. Ctrl atxikitzeko, Shift murrizteko @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Ispilatu - + Mirrors the selected objects along a line defined by two points Hautatutako objektuak ispilatzen ditu bi puntuk definitutako lerro baten luzeran @@ -1275,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mugitu - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Hautatutako objektuak bi punturen artean mugitzen ditu. Ctrl atxikitzeko, Shift murrizteko Draft_Offset - + Offset Desplazamendua - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Objektu aktiboa desplazatzen du. Ctrl atxikitzeko, Shift murrizteko, Alt kopiatzeko @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Matrize-bidea - + Creates copies of a selected object along a selected path. Hautatutako objektu baten kopiak sortzen ditu hautatutako bide batean zehar. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Puntua - + Creates a point object Puntu-objektu bat sortzen du @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Puntu-matrizea - + Creates copies of a selected object on the position of points. Hautatutako objektu baten kopiak sortzen ditu puntuen kokaguneetan. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Poligonoa - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Poligono erregular bat sortzen du. Ctrl atxikitzeko, Shift murrizteko @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Laukizuzena - + Creates a 2-point rectangle. CTRL to snap Bi puntuko laukizuzen bat sortzen du. Ctrl atxikitzeko @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Biratu - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Objektu aktiboak biratzen ditu. Ctrl atxikitzeko, Shift murrizteko, Alt kopiatzeko @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Eskala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Hautatutako objektuen eskala aldatzen du oinarri-puntu batetik abiatuz. Ctrl atxikitzeko, Shift murrizteko, Alt kopiatzeko @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Hautatu taldea - + Selects all objects with the same parents as this group Talde honen guraso berak dituzten objektu guztiak hautatzen ditu @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Hautatu planoa - + Select a working plane for geometry creation Hautatu laneko plano bat geometria sortzeko @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Proxy-objektu bat sortzen du uneko laneko planotik abiatuta - + Create Working Plane Proxy Sortu laneko planoaren proxy-a @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Formaren 2D bista - + Creates Shape 2D views of selected objects Hautatutako objektuen 2D formen bistak sortzen ditu @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma testutik... - + Creates text string in shapes. Testu-kateak sortzen ditu formetan. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Erakutsi atxikitze-barra - + Shows Draft snap toolbar Zirriborro-atxikipenen tresna-barra erakusten du @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Ezarri malda - + Sets the slope of a selected Line or Wire Hautatutako lerro edo alanbre baten malda ezartzen du @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angeluak - + Snaps to 45 and 90 degrees points on arcs and circles Arkuen eta zirkuluen 45 eta 90 graduetara atxikitzen da @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Erdia - + Snaps to center of circles and arcs Zirkuluen eta arkuen erdiko puntura atxikitzen da @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Kotak - + Shows temporary dimensions when snapping to Arch objects Behin-behineko kotak erakusten ditu arkitektura-objektuei atxikitzean @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Amaiera-puntua - + Snaps to endpoints of edges Ertzen amaiera-puntuetara atxikitzen da @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Hedadura - + Snaps to extension of edges Ertzen hedadurara atxikitzen da @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Sareta - + Snaps to grid points Sareta-puntuetara atxikitzen da @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Ebakidura - + Snaps to edges intersections Ertz-ebakiduretara atxikitzen da @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Txandakatu - + Activates/deactivates all snap tools at once Atxikitze-tresna guztiak aldi berean aktibatzen/desaktibatzen ditu - + Lock Blokeatu @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Erdiko puntua - + Snaps to midpoints of edges Ertzen erdiko puntuetara atxikitzen da @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Hurbilena - + Snaps to nearest point on edges Ertzen punturik hurbilenera atxikitzen da @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortogonala - + Snaps to orthogonal and 45 degrees directions Norabide ortogonaletara eta 45 gradukoetara atxikitzen ditu elementuak @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paraleloa - + Snaps to parallel directions of edges Ertzen norabide paraleloetara atxikitzen ditu elementuak @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendikularra - + Snaps to perpendicular points on edges Ertzetako puntu perpendikularretara atxikitzen ditu elementuak @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Berezia - + Snaps to special locations of objects Objektuen kokapen berezietara atxikitzen ditu elementuak @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Laneko planoa - + Restricts the snapped point to the current working plane Atxikitutako puntua uneko laneko planora mugatzen du @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Zatitu - + Splits a wire into two wires Alanbre bat bitan zatitzen du @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Luzatu - + Stretches the selected objects Hautatutako objektuak luzatzen ditu @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Testua - + Creates an annotation. CTRL to snap Oharpen bat sortzen du. Ctrl atxikitzeko @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Eraikuntza modua txandakatzen du hurrengo objektuetarako. - + Toggle Construction Mode Txandakatu eraikuntza modua @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Txandakatu modu jarraitua - + Toggles the Continue Mode for next commands. Modu jarraitua aktibatzen/desaktibatzen du hurrengo komandoetarako. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Txandakatu bistaratze modua - + Swaps display mode of selected objects between wireframe and flatlines Hautatutako objektuen bistaratze modua trukatzen du, alanbre-bilbearen eta lerro lauen artean @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Txandakatu sareta - + Toggles the Draft grid on/off Zirriborro-sareta aktibatzen/desaktibatzen du - + Grid Sareta - + Toggles the Draft grid On/Off Zirriborro-sareta aktibatzen/desaktibatzen du @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Muxarratu/luzatu - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Hautatutako objektua muxarratzen edo luzatzen du, edo aurpegi bakunak estruitzen ditu. Ctrl atxikitzeko, Shift uneko segmentura edo normalera murrizteko, Alt alderantzikatzeko @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Desegin azken segmentua - + Undoes the last drawn segment of the line being drawn Marrazten ari den lerroaren azken segmentua desegiten du @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Eguneratu - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Hautatutako objektuak objektu bakarrean elkartzen ditu, edo alanbre itxiak aurpegi bete bihurtzen ditu, edo aurpegiak batzen ditu - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - VisGroup bat gehitzen du - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Puntu anitzeko DraftWire (DWire) bat sortzen du. Ctrl atxikitzeko, Shift murrizteko + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Alanbretik B-spline kurbara - + Converts between Wire and B-spline Alanbre eta B-spline artean bihurtzen du @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Zirriborro-ezarpen orokorrak - + This is the default color for objects being drawn while in construction mode. Hau objektuen kolore lehenetsia da, eraikuntza moduan marrazten ari badira. - + This is the default group name for construction geometry Hau talde-izen lehenetsia da eraikuntza-geometriarako - + Construction Eraikuntza @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainGorde uneko kolorea eta lerro-zabalera saio batetik hurrengora - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Hau markatuta badago, kopiatze modua komandoz komando mantenduko da; bestela, komandoak beti ez kopiatzeko moduan abiaraziko dira - + Global copy mode Kopiatze modu globala - + Default working plane Laneko plano lehenetsia - + None Bat ere ez - + XY (Top) XY (goialdea) - + XZ (Front) XZ (aurrealdea) - + YZ (Side) YZ (alboa) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Ezarpen orokorrak - + Construction group name Eraikuntza-taldearen izena - + Tolerance Tolerantzia @@ -2015,22 +2050,22 @@ such as "Arial:Bold" SVG fitxategidun direktorio bat adieraz dezakezu hemen, zirriborroen itzaleztadura-eredu estandarrei gehi dakizkiekeen <pattern> definizioak dituzten SVGak gordetzeko - + Draft interface mode Zirriborro interfaze modua - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Zirriborroen moduluak lanerako erabiliko duen interfaze modua da hau: tresna-barraren moduak zirriborro-ezarpen guztiak tresna-barra bereizi batean kokatuko ditu, eta ataza-barraren moduak FreeCADen ataza-bista erabiliko du erabiltzaile-elkarrekintza guztietarako - + Toolbar Tresna-barra - + Taskview Ataza-bista @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt ald. - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalean, objektuak kopiatu ondoren, kopiak hautatu egiten dira. Aukera hau markatuta badago, kopien ordez oinarri-objektuak hautatuko dira. - + Select base objects after copying Hautatu oinarri-objektuak kopia egin ondoren @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Lerro nagusiak lodiago marraztuko dira. Adierazi hemen zenbat lauki utziko diren lerro nagusien artean. - + Internal precision level Barneko prezisio-maila @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Itzuli kolore zuria beltzera - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Hau markatuta dagoenean, zirriborroen tresnek piezen jatorrizkoak sortuko dituzte, zirriborro-objektuak sortu ordez, posible denean. - + Use Part Primitives when available Erabili piezen jatorrizkoak, eskuragarri daudenean @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Atxiki beti (desgaitu atxikitze modua) - - Construction geometry - Eraikuntza-geometria - - - + Construction geometry color Eraikuntza-geometriaren kolorea @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Hautatu letra-tipo fitxategi bat - + Fill objects with faces whenever possible Bete objektuak aurpegiekin, posible denean @@ -2542,7 +2572,7 @@ such as "Arial:Bold" Font size - Letra-tipoaren tamaina + Letra-tamaina @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Eguneratze automatikoa (inportatzaile zaharkitua soilik) - + Prefix labels of Clones with: Klonen etiketetan, erabili aurrizki gisa honako hau: @@ -2714,7 +2744,7 @@ Adib.: milimetroetan dauden fitxategietarako: 1, zentimetroetarako: 10, metroeta SVG objektuen kolorea FreeCADera inportatzeko erabiliko den metodoa da hau. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Hau markatuta badago, objektuak beteta agertuko dira modu lehenetsian. Bestela, alanbre-bilbe modura agertuko dira @@ -2794,17 +2824,7 @@ Adib.: milimetroetan dauden fitxategietarako: 1, zentimetroetarako: 10, metroeta Hau markatuta badago, geruza bereko objektuak zirriborro-blokeetan bilduko dira, bistaratzea azkartuz, baina edizioa zailduz - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Hau markatuta badago, urratsez urrats emandako argibideak bistaratuko dira irteerako leihoan, zirriborro komandoak exekutatzean - - - - Verbose command line mode - Komando-lerro modu xehatua - - - + When drawing lines, set focus on Length instead of X coordinate Lerroak marraztean, ezarri fokua luzeran, X koordenatuan ezarri ordez @@ -2884,711 +2904,857 @@ Adib.: milimetroetan dauden fitxategietarako: 1, zentimetroetarako: 10, metroeta Spline-segmentu maximoa: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Dezimal kopurua barneko koordenatuen eragiketetan (adib. 3 = 0,001). Baliorik orekatuenak 6 eta 8 artekoak direla kontsideratzen da FreeCAD erabiltzaileen artean. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Tolerantzia bat erabiltzen duten funtzioek darabilten balioa. +Horren azpiko diferentziak dituzten balioak horretarako berdintzen dira. Balio hori laster zaharkituta geratuko da, goiko doitasun-mailak biak kontrolatuko baititu. Use legacy python exporter - Use legacy python exporter + Erabili Python esportatzaile zaharra + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Eraikuntza-geometria + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Erlatiboa + + + + R + R + + + + Continue + Jarraitu + + + + T + T + + + + Close + Itxi + + + + O + O + + + + Copy + Kopiatu + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Bete + + + + L + L + + + + Exit + Irten + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Luzera + + + + H + H + + + + Wipe + Garbitu + + + + W + W + + + + Set WP + Ezarri WPa + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Murriztu X + + + + X + X + + + + Restrict Y + Murriztu Y + + + + Y + Y + + + + Restrict Z + Murriztu Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Zirriborro-atxikitzea - - - Draft creation tools - Zirriborroak sortzeko tresnak - - - - Draft modification tools - Zirriborroak aldatzeko tresnak - - - - Utilities - Utilitateak - - - - Wire tools - Alanbre-tresnak - - - - Snapping - Atxikitzea - draft - + not shape found ez da formarik aurkitu - + All Shapes must be co-planar Forma guztiek planokide izan behar dute - + The given object is not planar and cannot be converted into a sketch. Emandako objektua ez da planarra eta ezin da krokis bihurtu. - + Unable to guess the normal direction of this object Ezin izan da igarri objektu honen norabide normala - + Draft Command Bar Zirriborroen komando-barra - + Toggle construction mode Txandakatu eraikuntza modua - + Current line color Uneko lerro-kolorea - + Current face color Uneko aurpegi-kolorea - + Current line width Uneko lerro-kolorea - + Current font size Uneko letra-tamaina - + Apply to selected objects Aplikatu hautatutako objektuei - + Autogroup off Talde automatikoa desgaituta - + active command: Komando aktiboa: - + None Bat ere ez - + Active Draft command Zirriborro-komando aktiboa - + X coordinate of next point Hurrengo puntuaren X koordenatua - + X X - + Y Y - + Z Z - + Y coordinate of next point Hurrengo puntuaren Y koordenatua - + Z coordinate of next point Hurrengo puntuaren Z koordenatua - + Enter point Sartu puntua - + Enter a new point with the given coordinates Sartu emandako koordenatuak dituen puntu berri bat - + Length Luzera - + Angle Angelua - + Length of current segment Uneko segmentuaren luzera - + Angle of current segment Uneko segmentuaren angelua - + Radius Erradioa - + Radius of Circle Zirkuluaren erradioa - + If checked, command will not finish until you press the command button again Markatuta badago, komandoa ez da amaituko komando-botoia berriro sakatzen duzun arte - + If checked, an OCC-style offset will be performed instead of the classic offset Markatuta badago, OCC estiloko desplazamendua egingo da, desplazamendu klasikoa egingo da - + &OCC-style offset &OCC estiloko desplazamendua - + Add points to the current object Gehitu puntuak uneko objektuari - + Remove points from the current object Puntuak kentzen ditu uneko objektutik - + Make Bezier node sharp Zorroztu Bezier nodoa - + Make Bezier node tangent Egin tangente Bezier nodoa - + Make Bezier node symmetric Egin simetriko Bezier nodoa - + Sides Aldeak - + Number of sides Alde kopurua - + Offset Desplazamendua - + XY (top) XY (goialdea) - - Select XY plane - Hautatu XY planoa - - - + XZ (front) XZ (aurrealdea) - - Select XZ plane - Hautatu XZ planoa - - - + YZ (side) YZ (alboa) - - Select YZ plane - Hautatu YZ planoa - - - + View Bista - - Select plane perpendicular to the current view - Hautatu uneko bistarekiko perpendikularra den planoa - - - + Auto Automatikoa - - Do not project points to a drawing plane - Ez proiektatu puntuak marrazte-plano batera - - - + Text string to draw Marraztuko den testu-katea - + String Katea - + Height of text Testuaren altuera - + Height Altuera - + Intercharacter spacing Karaktereen arteko tartea - + Tracking Jarraipena - + Full path to font file: Letra-tipoaren fitxategiaren bide osoa: - + Open a FileChooser for font file Ireki fitxategi-hautatzaile bat letra-tipoa aukeratzeko - + Grid spacing Sareta-tarteak - + The spacing between the grid lines Sareta-lerroen arteko tartea - + Main line every Lerro nagusiaren maiztasuna - + The number of lines between main lines Lerro nagusien arteko lerro kopurua - + Center plane on view Zentratu planoa bistan - - Select Plane - Hautatu planoa - - - + Line Lerroa - + DWire DWire - + Circle Zirkulua - + Center X X zentroa - + Arc Arkua - + Point Puntua - + Label Etiketa - + Distance Distantzia - + Trim Muxarratu - + Pick Object Aukeratu objektua - + Edit Editatu - + Global X X globala - + Global Y Y globala - + Global Z Z globala - + Local X X lokala - + Local Y Y lokala - + Local Z Z lokala - + Invalid Size value. Using 200.0. Baliogabeko tamaina-balioa. 200.0 erabiliko da. - + Invalid Tracking value. Using 0. Jarraipen-balio baliogabea. 0 erabiltzen. - + Please enter a text string. Sartu testu-kate bat. - + Select a Font file Hautatu letra-tipo fitxategi bat - + Please enter a font file. Sartu letra-tipo fitxategi bat. - + Autogroup: Talde automatikoa: - + Faces Aurpegiak - + Remove Kendu - + Add Gehitu - + Facebinder elements Aurpegi-zorro elementuak - + Create Line Sortu lerroa - - Pick next point: - - Aukeratu hurrengo puntua: - - - - + Convert to Wire Bihurtu alanbre - + BSpline BSpline - + BezCurve Bezier kurba - + Create BezCurve Sortu BezCurve - + Rectangle Laukizuzena - + Create Plane Sortu planoa - + Create Rectangle Sortu laukizuzena - + Create Circle Sortu zirkulua - + Create Arc Sortu arkua - + Start Angle Hasierako angelua - + Aperture Irekidura - + Polygon Poligonoa - + Create Polygon Sortu poligonoa - + Ellipse Elipsea - + Create Ellipse Sortu elipsea - + Text Testua - + Create Text Sortu testua - + Dimension Kota - + Create Dimension Sortu kota - + ShapeString Testu-forma - + Create ShapeString Sortu testu-forma - + Copy Kopiatu - + Move Mugitu - + Change Style Aldatu estiloa - + Rotate Biratu - - Cannot offset this object type - - Ezin da objektu mota hau desplazatu - - - - + Stretch Luzatu - + Upgrade Eguneratu - + Downgrade Degradatu - + Selection is not a Knot Hautapena ez da adabegi bat - + Convert to Sketch Bihurtu krokis - + Convert to Draft Bihurtu zirriborro - + Convert Bihurtu - + Array Matrizea - + Create Point Sortu puntua - + Mirror Ispilatu - + &Draft &Zirriborroa @@ -3612,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'. - + Draft.makeBSpline: not enough points Draft.makeBSpline: puntu gutxiegi - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Amaiera-puntu berdinek itxiera behartzen dute - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Puntuen zerrenda baliogabea - + No object given Ez da objekturik eman - + The two points are coincident Bi puntuak bat datoz - + Found groups: closing each open object inside Taldeak aurkitu dira: bere barruan irekita dauden objektuak ixten - + Found mesh(es): turning into Part shapes Sarea(k) aurkitu d(ir)a: pieza-forma bihurtzen - + Found 1 solidifiable object: solidifying it Solido bihur daitekeen objektu bat aurkitu da: hura solido bihurtzen - + Found 2 objects: fusing them Bi objektu aurkitu dira: haiek fusionatzen - + Found several objects: creating a shell Hainbat objektu aurkitu dira: oskol bat sortzen - + Found several coplanar objects or faces: creating one face Hainbat objektu edo aurpegi planokide aurkitu dira: aurpegi bat sortzen - + Found 1 non-parametric objects: draftifying it Parametrikoa ez den objektu bat aurkitu da: hura zirriborratzen - + Found 1 closed sketch object: creating a face from it Itxitako krokis-objektu bat aurkitu da: aurpegi bat sortzen harekin - + Found 1 linear object: converting to line Objektu lineal bat aurkitu da: lerro bihurtzen - + Found closed wires: creating faces Alanbre itxiak aurkitu dira: aurpegiak sortzen - + Found 1 open wire: closing it Alanbre ireki bat aurkitu da: hura ixten - + Found several open wires: joining them Irekitako zenbait alanbre aurkitu dira: haiek elkartzen - + Found several edges: wiring them Hainbat ertz aurkitu dira: haiek hari bihurtzen - + Found several non-treatable objects: creating compound Tratatu ezin daitezkeen hainbat objektu aurkitu dira: konposatua sortzen - + Unable to upgrade these objects. Ezin izan dira objektu hauek eguneratu. - + Found 1 block: exploding it Bloke bat aurkitu da: hura lehertzen - + Found 1 multi-solids compound: exploding it Solido anitzeko konposatu bat aurkitu da: hura lehertzen - + Found 1 parametric object: breaking its dependencies Objektu parametriko bat aurkitu da: bere mendekotasunak hausten - + Found 2 objects: subtracting them Bi objektu aurkitu dira: haien kenketa egiten - + Found several faces: splitting them Hainbat aurpegi aurkitu dira: haiek zatitzen - + Found several objects: subtracting them from the first one Hainbat objektu aurkitu dira: lehen objektuarekin kenketa egiten - + Found 1 face: extracting its wires Aurpegi bat aurkitu da: haren alanbreak erauzten - + Found only wires: extracting their edges Alanbreak soilik aurkitu dira: haien ertzak erauzten - + No more downgrade possible Ezin da gehiago degradatu - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Lehen/azken puntu berarekin itxi da. Geometria ez da eguneratu. - + No point found Ez da punturik aurkitu - + ShapeString: string has no wires Testu-forma: testuak ez du alanbrerik - + Relative Erlatiboa - + Continue Jarraitu - + Close Itxi @@ -3829,7 +3995,7 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Murriztu Z - + Select edge Hautatu ertza @@ -3844,7 +4010,7 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Luzera modua - + Wipe Garbitu @@ -3859,513 +4025,636 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Txandakatu atzikitze-objektua - + Check this to lock the current angle Markatu hau uneko angelua blokeatzeko - + Coordinates relative to last point or absolute Azken puntuarekiko erlatiboak diren edo absolutuak diren koordenatuak - + Filled Beteta - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Markatu hau objektuak beteta agertu behar badu; bestela, alanbre-bilbe gisa agertuko da - - - + Finish Amaitu - + Finishes the current drawing or editing operation Uneko marrazte- edo editatze-eragiketa amaitzen du - + &Undo (CTRL+Z) &Desegin (Ctrl+Z) - + Undo the last segment Desegin azken segmentua - + Finishes and closes the current line Uneko lerroa amaitzen eta ixten du - + Wipes the existing segments of this line and starts again from the last point Lerro honetan dauden segmentuak garbitzen ditu eta berriro hasten da azken puntutik - + Set WP Ezarri WPa - + Reorients the working plane on the last segment Laneko planoaren orientazioa aldatzen du azken segmentuan - + Selects an existing edge to be measured by this dimension Kota honek neurtuko duen eta lehendik dagoen ertz bat hautatzen du - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Markatuta badago, objektuak kopiatu egingo dira, ez mugitu. 'Hobespenak -> Zirriborroa -> Kopiatze modu globala' modu hau hurrengo komandoetan mantendu nahi bada - - options - aukerak - - - + Default Lehenetsia - + Pick a face to define the drawing plane Aukeratu aurpegi bat marrazte-planoa definitzeko - - First point: - Lehen puntua: - - - - Closing - Ixten - - - + Create Wire Sortu alanbrea - - Removing last point - Azken puntua kentzen - - - - Next point: - Hurrengo puntua: - - - - Restarting from - Hemendik berrabiarazten: - - - + Unable to create a Wire from selected objects Ezin izan da alanbre bat sortu hautatutako objektuak erabilita - + Spline has been closed Spline-a itxi egin da - + Last point has been removed Azken puntua kendu egin da - - Pick next point, or Finish (shift-F) or close (o): - Aukeratu hurrengo puntua, edo amaitu (Shift-F), edo itxi (o): - - - + Create B-spline Sortu B-spline elementua - + Bezier curve has been closed Bezier kurba itxi egin da - - Pick first point: - Aukeratu lehen puntua: - - - - Pick opposite point: - Aukeratu aurkako puntua: - - - - Pick center point: - Aukeratu erdiko puntua: - - - - Pick radius: - Aukeratu erradioa: - - - - Pick start angle: - Aukeratu hasierako angelua: - - - - Pick aperture: - Aukeratu irekidura: - - - - Aperture angle: - Irekidura-angelua: - - - - Pick location point: - Aukeratu kokapen-puntua: - - - + Edges don't intersect! Ertzek ez dute elkar ebakitzen! - + Pick ShapeString location point: Aukeratu testu-formaren kokapen-puntua: - + Select an object to move Hautatu mugituko den objektua - - Pick start point: - Aukeratu hasiera-puntua: - - - - Pick end point: - Aukeratu amaiera-puntua: - - - + Select an object to rotate Hautatu biratuko den objektua - - Pick rotation center: - Aukeratu biraketa-zentroa: - - - - Pick base angle: - Aukeratu oinarri-angelua: - - - - Pick rotation angle: - Aukeratu biraketa-angelua: - - - + Select an object to offset Hautatu desplazatuko den objektua - + Offset only works on one object at a time Desplazamenduak bakoitzean objektu bakar batean funtzionatzen du - + Sorry, offset of Bezier curves is currently still not supported Barkatu, Bezier kurben desplazamendua ezin da oraindik egin - - Pick distance: - Aukeratu distantzia: - - - + Select an object to stretch Hautatu luzatuko den objektua - - Pick first point of selection rectangle: - Aukeratu hautapen-laukizuzenaren lehen puntua: - - - - Pick opposite point of selection rectangle: - Aukeratu hautapen-laukizuzenaren beste aldeko puntua: - - - - Pick start point of displacement: - Aukeratu desplazamenduaren hasiera-puntua: - - - - Pick end point of displacement: - Aukeratu desplazamenduaren amaiera-puntua: - - - + Turning one Rectangle into a Wire Laukizuzen bat alanbre bihurtzen - + Select an object to join Hautatu elkartuko den objektua - + Join Elkartu - + Select an object to split Hautatu zatituko den objektua - + Select an object to upgrade Hautatu eguneratuko den objektua - + Select object(s) to trim/extend Hautatu muxarratuko/luzatuko d(ir)en objektua(k) - + Unable to trim these objects, only Draft wires and arcs are supported Ezin dira objektu horiek muxarratu, zirriborro-alanbreak eta arkuak soilik onartzen dira - + Unable to trim these objects, too many wires Ezin dira objektu hauek muxarratu, alanbre gehiegi - + These objects don't intersect Objektu hauek ez dute elkar ebakitzen - + Too many intersection points Ebakitze-puntu gehiegi - + Select an object to scale Hautatu eskalatuko den objektua - - Pick base point: - Aukeratu oinarri-puntua: - - - - Pick reference distance from base point: - Aukeratu erreferentzia-distantzia oinarri-puntutik: - - - - Pick new distance from base point: - Aukeratu distantzia berria oinarri-puntutik: - - - + Select an object to project Hautatu proiektatuko den objektua - - This object type is not editable - Objektu mota hau ezin da editatu - - - + Please select only one object Hautatu objektu bakar bat - + Select a Draft object to edit Hautatu zirriborro-objektu bat, hura editatzeko - + Active object must have more than two points/nodes Objektu aktiboak bi puntu/nodo baino gehiago eduki behar ditu - + Endpoint of BezCurve can't be smoothed Bezier kurbaren amaiera-puntua ezin da leundu - + Select an object to convert Hautatu bihurtuko den objektua - + Select an object to array Hautatu matrizeratuko den objektua - + Please select base and path objects Hautatu oinarri- eta bide-objektuak - + Please select base and pointlist objects Hautatu oinarri- eta puntu-zerrenden objektuak - + Select an object to clone Hautatu klonatuko den objektua - + Select face(s) on existing object(s) Hautatu lehendik da(go)uden objektu(ar)en aurpegia(k) - + Select an object to mirror Hautatu ispilatuko den objektua - - Pick start point of mirror line: - Aukeratu ispilatze-lerroaren hasiera-puntua: - - - - Pick end point of mirror line: - Aukeratu ispilatze-lerroaren amaiera-puntua: - - - + This tool only works with Wires and Lines Tresna honek alanbreekin eta lerroekin soilik funtzionatzen du - - - Pick target point: - Aukeratu helburu-puntua: - - - - Pick endpoint of leader line: - Aukeratu gida-marraren amaiera-puntua: - - - - Pick text position: - Aukeratu testuaren posizioa: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (lehen Teigha) File Converter ez da aurkitu, DWG euskarria desgaituta dago - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s objektuak oinarri bat partekatzen du beste %d objekturekin. Egiaztatu hau aldatu nahi duzun. Subelement mode - Subelement mode + Azpi-elementuen modua - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Txandakatu erradioen eta angeluen arkuen edizioa - + Modify subelements - Modify subelements + Aldatu azpi-elementuak - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Hautatuta badaude, azpi-elementuek objektu osoa ordeztuko dute - + CubicBezCurve - CubicBezCurve + CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Zenbait azpi-elementu ezin dira mugitu. - + Scale Eskala - + Some subelements could not be scaled. - Some subelements could not be scaled. + Zenbait azpi-elementu ezin dira eskalatu. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + Paretaren oinarrizko krokisa editatzeko konplexuegia da: hobe zuzenean krokisa editatzen bada + + + + Top + Goikoa + + + + Front + Aurrekoa + + + + Side + Aldea + + + + Current working plane + Uneko laneko planoa + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatikoa + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Biraketa + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Hautatu objektua editatzeko + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Zirriborroa + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitateak + + + + Wire tools + Alanbre-tresnak + + + + Snapping + Atxikitzea diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index dc256b5ed2..579ff5365a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index e8bad28389..4b668102ee 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Defines a hatch pattern - + Sets the size of the pattern Sets the size of the pattern - + Startpoint of dimension Ulottuvuuden aloituspiste - + Endpoint of dimension Dimension päätepiste - + Point through which the dimension line passes Dimension kauttakulkupiste - + The object measured by this dimension The object measured by this dimension - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter For arc/circle measurements, false = radius, true = diameter - + Font size Kirjasimen koko - + The number of decimals to show Näytettävien desimaalien määrä - + Arrow size Nuolen koko - + The spacing between the text and the dimension line The spacing between the text and the dimension line - + Arrow type Nuolen tyyppi - + Font name Fontin nimi - + Line width Viivan leveys - + Line color Viivan väri - + Length of the extension lines Jatkoviivojen pituus - + Rotate the dimension arrows 180 degrees Käännä dimensionuolia 180 astetta - + Rotate the dimension text 180 degrees Käännä dimensiotekstiä 180 astetta - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Ohita teksti. Aseta dimension pituus käyttämällä $dim - + A unit to express the measurement. Leave blank for system default A unit to express the measurement. Leave blank for system default - + Start angle of the dimension Dimension aloituskulma - + End angle of the dimension Dimension lopetuskulma - + The center point of this dimension Tämän dimension keskipiste - + The normal direction of this dimension Tämän dimension normaalisuunta - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Suorakulmion pituus - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Luo pinta - + Defines a texture image (overrides hatch patterns) Käytä tekstuurikuvaa (ohittaa ristikkokuvion) - + Start angle of the arc Kaaren aloituskulma - + End angle of the arc (for a full circle, give it same value as First Angle) Kaaren lopetuskulma (käytä aloituspistettä jos haluat ympyrän) - + Radius of the circle Ympyrän säde - + The minor radius of the ellipse Ellipsin pienempi säde - + The major radius of the ellipse Ellipsin suurempi säde - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line Tämän viivan aloituspiste - + The end point of this line Tämän viivan päätepiste - + The length of this line Tämän viivan pituus - + Create a face if this object is closed Luo pinnat mikäli objekti on suljettu - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Pintojen määrä - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projektion suunta - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text Tekstin riviväli - + The color of the projected objects The color of the projected objects - + The linked object The linked object - + Shape Fill Style Muodon täyttötyyli - + Line Style Viivan tyyli - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Luo pinnat mikäli objekti on suljettu - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Jatkuvuus - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Näytä piilotetut tiedostot - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create Luotavan taulukon tyyppi - + The axis direction Akselin suunta - + Number of copies in X direction Kopioiden määrä X-suunnassa - + Number of copies in Y direction Kopioiden määrä Z-suunnassa - + Number of copies in Z direction Kopioiden määrä Z-suunnassa - + Number of copies Kopioiden määrä - + Distance and orientation of intervals in X direction Välien etäisyys ja suunta X-suunnassa - + Distance and orientation of intervals in Y direction Välien etäisyys ja suunta Y-suunnassa - + Distance and orientation of intervals in Z direction Välien etäisyys ja suunta Z-suunnassa - + Distance and orientation of intervals in Axis direction Välien etäisyys ja suunta akselin suunnassa - + Center point Keskipiste - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X-Sijainti - + Y Location Y-Sijainti - + Z Location Z-Sijainti - + Text string Teksti - + Font file name Fonttitiedoston nimi - + Height of text Tekstin korkeus - + Inter-character spacing Kirjaimien välistys - + Linked faces Linkitetyt pinnat - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Suorakulmion korkeus - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object Tämän kohteen sijoittelu - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment Suoran segmentin pituus - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Perusta - + PointList PointList - + Count Määrä - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Mittakaava - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Tasainen skaalaus - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Lisää piste - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Siirrä ryhmään... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Käytä nykyistä tyyliä - + Applies current line width and color to selected objects Maalaa tyyli @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Kaari - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Taulukko - + Creates a polar or rectangular array from a selected object Luo polaari- tai suorakaideruudukon valitusta kohteesta @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Luo Bezier-käyrän. CTRL kohdistaa, SHIFT luo rajoitteen @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Ympyrä - + Creates a circle. CTRL to snap, ALT to select tangent objects Luo ympyrän. CTRL kohdistaa, ALT valitsee tangenttikohteita @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Kloonaa - + Clones the selected object(s) Kloonaa valittu kohde(kohteet) @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Sulje viiva - + Closes the line being drawn Sulkee piirretyn viivan @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Poista piste - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Mitta - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Luo mitta. CTRL kohdistaa, SHIFT-rajoita, ALT-valitse segmentti @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Hajota - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Hahmottele luonnos - + Convert bidirectionally between Draft and Sketch objects Muuntaa kaksisuuntaisesti vedoksen ja luonnoksen objektien välillä @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Piirustus - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Muokkaa - + Edits the active object Muokkaa aktiivista objektia @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellipsi - + Creates an ellipse. CTRL to snap Luo ellipsin. CTRL kohdistaa @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Pintojen liittäjä - + Creates a facebinder object from selected face(s) Luo liitettyjen tahkojen kohde valitu(i)sta tahko(i)sta @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Viimeistele viiva - + Finishes a line without closing it Viimeistele viiva sulkematta sitä @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Vaihda ulottuvuus - + Flip the normal direction of a dimension Vaihda ulottuvuus normaalisuuntaan @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Paranna - + Heal faulty Draft objects saved from an earlier FreeCAD version Paranna vialliset vedoskohteet, jotka on tallennettu aiemmalla FreeCAD-versiolla @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Viiva - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Luo 2 pisteen viiva. CTRL kohdistaa, SHIFT tekee rajoituksia @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Peilaus - + Mirrors the selected objects along a line defined by two points Mirrors the selected objects along a line defined by two points @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Siirrä - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Siirtymä - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Siirrä aktiivista kohdetta. CTRL kohdistaa, SHIFT rajoittaa, ALT kopioi @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Luo valitun objektin kopiot pitkin valittua polkua. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Piste - + Creates a point object Luo pisteobjektin @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Monikulmio - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Luo säännöllinen monikulmio. CTRL kohdistaa, SHIFT rajoittaa @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Suorakulmio - + Creates a 2-point rectangle. CTRL to snap Luo 2-pisteen suorakaide. CTRL kohdistaa @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Pyöritä - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Pyörittää valittuja kohteita. CTRL kohdistaa, SHIFT rajoittaa, ALT kopioi @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Mittakaava - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skaalaa valitut kohteet peruspisteestä. CTRL kohdistaa, SHIFT rajoittaa, ALT kopioi @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Valitse ryhmä - + Selects all objects with the same parents as this group Valitsee kaikki objektit, joissa on samat vanhemmat kuin tällä ryhmällä @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Valitse pinta - + Select a working plane for geometry creation Valitse työskentelytaso geometrian luomista varten @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Muodon 2D näkymä - + Creates Shape 2D views of selected objects Luo muodon 2D näkymän valituista objekteista @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Muoto tekstistä... - + Creates text string in shapes. Luo merkkijonon muodoissa. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Näytä kohdistustyökalupalkki - + Shows Draft snap toolbar Näyttää vedoksen kohdistustyökalupalkin @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Kulmat - + Snaps to 45 and 90 degrees points on arcs and circles Poimii 45 ja 90 asteen pisteisiin kaarissa ja ympyröissä @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Keskikohta - + Snaps to center of circles and arcs Poimii ympyröiden ja kaarien keskipisteeseen @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Mitat - + Shows temporary dimensions when snapping to Arch objects Näyttää väliaikaisia ulottuvuuksia kun poimitaan kaarikohteisiin @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Päätepiste - + Snaps to endpoints of edges Poimii reunojen päätepisteisiin @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Laajennus - + Snaps to extension of edges Poimii reunojen laajennuksiin @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Ruudukko - + Snaps to grid points Poimii ruudukon pisteisiin @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Risteys - + Snaps to edges intersections Poimii reunojen leikkauksiin @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Vaihda päälle/pois - + Activates/deactivates all snap tools at once Aktivoi/poistaa kaikki kohdistustyökalut kerralla - + Lock Lukitse @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Keskipiste - + Snaps to midpoints of edges Poimii reunojen keskipisteisiin @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Lähin - + Snaps to nearest point on edges Poimii lähimpään reunojen pisteeseen @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orto - + Snaps to orthogonal and 45 degrees directions Poimii kohtisuoriin ja 45 asteen suuntiin @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Samansuuntainen - + Snaps to parallel directions of edges Poimii reunoihin samansuuntaisesti @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Kohtisuorassa - + Snaps to perpendicular points on edges Poimii kohtisuoriin pisteisiin reunoissa @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Erityiset - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Työskentelytaso - + Restricts the snapped point to the current working plane Rajoittaa poimitun kohta nykyiseen työtasoon @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Venytys - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Teksti - + Creates an annotation. CTRL to snap Luo huomautus. CTRL kohdistaa @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Vaihtaa rakennetilaa seuraaville objekteille. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Vaihda jatka-edelleen tilaan - + Toggles the Continue Mode for next commands. Kytkee jatkuvuustilan seuraaville komennoille. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Vaihda näyttötilaa - + Swaps display mode of selected objects between wireframe and flatlines Vaihtaa näyttötilaan valittujen objektien Lankamallin ja nollaviivojen välillä @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Näytä tai piilota ruudukko - + Toggles the Draft grid on/off Vaihtaa vedosruudukon päälle/pois - + Grid Ruudukko - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Leikkaa tai laajentaa valitut objektit, tai pursottaa yhden tahkot. CTRL poimii, SHIFT rajoittaa nykyiseen segmenttiin tai normaalille segmentille, ALT kääntää @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Kumoa viimeinen segmentti - + Undoes the last drawn segment of the line being drawn Kumoaa viimeksi piirretyn segmentin piirretystä viivasta @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Yhdennä - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Lisää VisGroup - - Draft_Wire - - DWire - DLanka + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Luo usean pisteen vedoslankamallin (DraftWire/DWire). CTRL kohdistaa, SHIFT rajoittaa + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Yleiset vedosasetukset - + This is the default color for objects being drawn while in construction mode. Tämä on oletusväri objekteille jotka on piirretty rakennetilassa. - + This is the default group name for construction geometry Tämä on oletusvalinta ryhmän nimeksi rakennetilan geometrioille - + Construction Rakenne @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainTallentaa nykyisen värin ja viivanleveyden eri istuntoihin - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Jos tämä vaihtoehto on valittuna, kopiointitila pidetään komennossa, muuten komento aloitetaan aina kopioimattomassa tilassa - + Global copy mode Yleinen kopiointitila - + Default working plane Oletusarvoinen työtaso - + None Ei mitään - + XY (Top) XY (Päältä) - + XZ (Front) XZ (edestä) - + YZ (Side) YZ (sivulta) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Yleiset asetukset - + Construction group name Rajoiteryhmän nimi - + Tolerance Toleranssi @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Täällä voit määrittää SVG-tiedostoja sisältävän hakemiston joka sisältää <pattern> määritelmiä, jotka voidaan lisätä standardiin vedos-täyttökuvio malleihin - + Draft interface mode Vedostilan käyttöliittymätila - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Tämä on UI tila, jossa vedoksen moduuli toimii: Työkalu tilassa sijoitetaan kaikki vedosasetukset erilliseen työkalupalkkiin, kun taas tehtäväpalkin tila käyttää FreeCAD:n tehtävänäkymä -järjestelmää käyttäjän kaikkiin toimiin - + Toolbar Työkalupalkki - + Taskview Tehtävänäkymä @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt toimintotila - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normaalisti, kun kopioidaan esineitä, niin kopioitavat valitaan. Jos tämä vaihtoehto on valittuna, niin sen sijaan valitaan perusobjektit. - + Select base objects after copying Valitse perusobjektit kopioinnin jälkeen @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Pääviivat ovat paksumpia. Määritä tässä, kuinka monta ruutua on pääviivojen välillä. - + Internal precision level Sisäinen tarkkuustaso @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Muunna valkoinen viivan väri mustaksi - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Kun tämä on valittuna, vedos-työkalut luovat osan perusalkioita vedoskohteiden tilalta, jos käytettävissä. - + Use Part Primitives when available Käytä osien perusalkioita, kun käytettävissä @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Kohdista aina (kohdistustilanäppäin ei käytössä) - - Construction geometry - Rakenteen geometria - - - + Construction geometry color Rakentamisen geometria väri @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Valitse fontti-tiedosto - + Fill objects with faces whenever possible Täytä kohteet pinnoilla aina kun mahdollista @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2714,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2794,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2884,12 +2904,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,695 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Sulje + + + + O + O + + + + Copy + Kopio + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Pituus + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Vedoksen kohdistus - - - Draft creation tools - Vedoksen luomistyökalut - - - - Draft modification tools - Vedoksen muokkaustyökalut - - - - Utilities - Apuvälineet - - - - Wire tools - Lankatyökalut - - - - Snapping - Katkaiseva - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. Annettu kohde ei ole tasomainen eikä sitä voida muuntaa luonnokseen. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Vedos komentopalkki - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Käytä valittuihin kohteisiin - + Autogroup off Autogroup off - + active command: aktiivinen komento: - + None Ei mitään - + Active Draft command Aktiivinen vedos-komento - + X coordinate of next point X-koordinaatin seuraava kohta - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-koordinaatin seuraava kohta - + Z coordinate of next point Z-koordinaatin seuraava kohta - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length Pituus - + Angle Kulma - + Length of current segment Nykyisen segmentin pituus - + Angle of current segment Nykyisen segmentin kulma - + Radius Säde - + Radius of Circle Ympyrän säde - + If checked, command will not finish until you press the command button again Jos valintaruutu on valittuna, komento ei ole valmis, ennenkuin painat komentopainiketta uudelleen - + If checked, an OCC-style offset will be performed instead of the classic offset Jos valittuna, niin OCC-tyylin siirtymä tehdään klassisen siirtymän sijaan - + &OCC-style offset &OCC-tyylin siirtymä - + Add points to the current object Lisää pisteitä nykyiseen objektiin - + Remove points from the current object Pisteiden poistaminen nykyisestä objektista - + Make Bezier node sharp Tee Bezier solmupisteestä terävä - + Make Bezier node tangent Tee Bezier solmupisteestä tangentti - + Make Bezier node symmetric Tee Bezier solmupisteestä symmetrinen - + Sides Sivut - + Number of sides Sivujen lukumäärä - + Offset Siirtymä - + XY (top) XY (top) - - Select XY plane - Valitse XY-taso - - - + XZ (front) XZ (front) - - Select XZ plane - Valitse XZ-taso - - - + YZ (side) YZ (side) - - Select YZ plane - Valitse YZ-taso - - - + View Näytä - - Select plane perpendicular to the current view - Valitse taso kohtisuorassa nykyiseen näkymään - - - + Auto Automaattinen - - Do not project points to a drawing plane - Ei projisoidu pisteitä piirustuksen tasoon - - - + Text string to draw Merkkijono piirrokseen - + String Merkkijono - + Height of text Tekstin korkeus - + Height Korkeus - + Intercharacter spacing Kirjaimien väli - + Tracking Seuranta - + Full path to font file: Fonttitiedoston koko kansiopolku: - + Open a FileChooser for font file Avaa TiedostonValitsin fontti-tiedostoa varten - + Grid spacing Ruudukon välit - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Valitse taso - - - + Line Viiva - + DWire DLanka - + Circle Ympyrä - + Center X Keskitä X - + Arc Kaari - + Point Piste - + Label Label - + Distance Etäisyys - + Trim rajaa - + Pick Object Valitse objekti - + Edit Muokkaa - + Global X Yleinen X - + Global Y Yleinen Y - + Global Z Yleinen Z - + Local X Paikallinen X - + Local Y Paikallinen Y - + Local Z Paikallinen Z - + Invalid Size value. Using 200.0. Koon arvo ei kelpaa. Käytetään 200,0. - + Invalid Tracking value. Using 0. Seuranta-arvo ei kelpaa. Käytetään 0. - + Please enter a text string. Kirjoita merkkijono. - + Select a Font file Valitse fontti-tiedosto - + Please enter a font file. Anna fonttitiedosto. - + Autogroup: Autogroup: - + Faces Pinnat - + Remove Poista - + Add Lisää - + Facebinder elements Facebinder elements - + Create Line Luo viiva - - Pick next point: - - Valitse seuraava piste: - - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Luo Bezier käyrä - + Rectangle Suorakulmio - + Create Plane Luo taso - + Create Rectangle Luo suorakulmio - + Create Circle Luo ympyrä - + Create Arc Luo kaari - + Start Angle Lähtökulma - + Aperture Aukko - + Polygon Monikulmio - + Create Polygon Luo monikulmio - + Ellipse Ellipsi - + Create Ellipse Luo ellipsi - + Text Teksti - + Create Text Luo teksti - + Dimension Mitta - + Create Dimension Luo mitta - + ShapeString Muotoilujono - + Create ShapeString Luo muotoilujono - + Copy Kopio - + Move Siirrä - + Change Style Muuta tyyliä - + Rotate Pyöritä - - Cannot offset this object type - - Ei voida siirtää tätä objektityyppiä - - - - + Stretch Venytys - + Upgrade Yhdennä - + Downgrade Hajota - + Selection is not a Knot Valinta ei ole solmupiste - + Convert to Sketch Muunna luonnokseksi/sketch - + Convert to Draft Muuntaa vedokseksi/draft - + Convert Muunna - + Array Taulukko - + Create Point Luo piste - + Mirror Peilaus - + &Draft &Vedos @@ -3612,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Sulje @@ -3829,7 +3995,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3844,7 +4010,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3859,454 +4025,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Valmis - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Oletus - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Luo B-käyrä - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4316,56 +4307,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Mittakaava - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Yläpuoli + + + + Front + Etupuoli + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Vedos (vesirajasta pohjaan) + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Apuvälineet + + + + Wire tools + Lankatyökalut + + + + Snapping + Katkaiseva + diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.qm b/src/Mod/Draft/Resources/translations/Draft_fil.qm index 50836c791a..ac10466d12 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fil.qm and b/src/Mod/Draft/Resources/translations/Draft_fil.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts index d3881b36f9..fb76e27481 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fil.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Tumutukoy sa isang huwaran ng hatch - + Sets the size of the pattern Nagtatakda ng sukat ng huwaran - + Startpoint of dimension Panimulang punto ng dimensyon - + Endpoint of dimension Panghuling punto ng dimensyon - + Point through which the dimension line passes Ituro kung saang linya ng dimensyon ang dinaanan - + The object measured by this dimension Ang bagay na sinukat sa dimensyong ito - + The geometry this dimension is linked to Ang geometry na nauugnay sa koneksyong ito - + The measurement of this dimension Ang sukat ng dimensyong ito - + For arc/circle measurements, false = radius, true = diameter Para sa mga sukat ng arko / bilog, hindi tama = radius, tama = diyametro - + Font size Laki ng font - + The number of decimals to show Ang bilang ng mga desimal na ipapakita - + Arrow size Sukat ng palaso - + The spacing between the text and the dimension line Ang espasyo sa pagitan ng teksto at linya ng dimensyon - + Arrow type Uri ng palaso - + Font name Uri ng pangalan - + Line width Lapad ng linya - + Line color Kulay ng linya - + Length of the extension lines Haba ng mga lawig ng linya - + Rotate the dimension arrows 180 degrees I-ikot ang mga palaso ng laki ng 180 grado - + Rotate the dimension text 180 degrees I-ikot ang laki ng teksto ng 180 grado - + Show the unit suffix Ipakita ang suffix ng unit - + The position of the text. Leave (0,0,0) for automatic position Ang posisyon ng teksto ay. Iwanan ng (0,0,0) para sa awtomatikong posisyon - + Text override. Use $dim to insert the dimension length Pag-iba sa Teksto. Gamitin ang $dim para maisingit ang haba ng dimensyon - + A unit to express the measurement. Leave blank for system default Ang yunit upang ipahayag ang sukat.. Iwanang blanko para sa default ng sistema - + Start angle of the dimension Simulan ang anggulo ng dimensyon - + End angle of the dimension Huling anngulo ng dimensyon - + The center point of this dimension Ang sentrong punto ng dimensyong ito - + The normal direction of this dimension Ang normal na direksyon ng dimensyong ito - + Text override. Use 'dim' to insert the dimension length Palawakin ang teksto. Gamitin ang 'dim' upang ipasok ang laki ng sukat - + Length of the rectangle Haba ng rektanggulo - + Radius to use to fillet the corners Radius na gagamitin upang mabulok ang mga sulok - + Size of the chamfer to give to the corners Sukat ng chamfer upang ibigay sa mga sulok - + Create a face Lumikha ng isang harapán - + Defines a texture image (overrides hatch patterns) Lumikha ng isang pagtukoy sa muka ng isang texture na imahe (pinapalitan ang mga pattern ng hatch) - + Start angle of the arc Simulan ang anggulo ng Balangaw - + End angle of the arc (for a full circle, give it same value as First Angle) Tapujsin ang anggulo ng arko (para sa isang buong bilog, bigyan ito parehong halaga bilang Unang Anggulo) - + Radius of the circle Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog ng bilog - + The minor radius of the ellipse Ang menor de edad Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog ng ellipse - + The major radius of the ellipse Ang pangunahing radius ng ellipse - + The vertices of the wire Ang mga vertex ng alambre - + If the wire is closed or not Kung ang alambre ay sarado o hindi - + The start point of this line Ang panimulang punto ng linyang ito - + The end point of this line Ang huling punto ng linyang ito - + The length of this line Ang kawakasan ng linyang ito - + Create a face if this object is closed Gumawa ng harapan kung sarado ang bagay na ito - + The number of subdivisions of each edge Ang bilang ng mga subdivision ng bawat hangganan - + Number of faces Bilang ng mga harapan - + Radius of the control circle Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog ng kontrol na bilog - + How the polygon must be drawn from the control circle Paano kinakailangang makuha ang polygon mula sa control circle - + Projection direction Direksyon ng projection - + The width of the lines inside this object Ang lawak ng mga linya sa loob ng bagay na ito - + The size of the texts inside this object Ang sukat ng mga teksto sa loob ng bagay na ito - + The spacing between lines of text Ang espasyo sa pagitan ng mga linya ng teksto - + The color of the projected objects Ang kulay ng inaasahang layunin ng bagay - + The linked object Ang naka-link na bagay - + Shape Fill Style Hugis ng Shape Fill - + Line Style Hugis ng Linya - + If checked, source objects are displayed regardless of being visible in the 3D model Kapag tsek, ang pinagmulan ng bagay ay ipamalas ng hindi alintana ang pagiging tatlong dimensyong modelo na nakikita - + Create a face if this spline is closed Lumikha ng isang mukha kung isinara ang spline na ito - + Parameterization factor Katungkulan ng parameterization - + The points of the Bezier curve Ang mga punto ng curve ng Bezier - + The degree of the Bezier function Ang grado ng pag-andar ng Bezier - + Continuity Pagtuloy-tuloy - + If the Bezier curve should be closed or not Kung ang Bezier kurna ay dapat sarhan o hindi - + Create a face if this curve is closed Lumikha ng isang mukha kung isinara ang spline na ito - + The components of this block Ang mga bahagi ng bloke na ito - + The base object this 2D view must represent Ang base object ay dapat na kinakatawan ng 2D view na ito - + The projection vector of this object Ang projection vector ng bagay na ito - + The way the viewed object must be projected Ang paraan ng natingnan na bagay ay dapat maasahan - + The indices of the faces to be projected in Individual Faces mode Ang mga indeks ng mga harapan ay inaasahang nasa Indibidwal na Mukha anyo - + Show hidden lines Ipakita ang mga nakatagong mga linya - + The base object that must be duplicated Ang punong bagay na dapat maparisan - + The type of array to create Ang uri ng array na gagawin - + The axis direction Ang direksyon ng aksis - + Number of copies in X direction Bilang ng mga kopya sa X na direksyon - + Number of copies in Y direction Bilang ng mga kopya sa Y na direksyon - + Number of copies in Z direction Bilang ng mga kopya sa Z na direksyon - + Number of copies Bilang ng kopya - + Distance and orientation of intervals in X direction Distansya at oryentasyon ng mga agwat sa X direksyon - + Distance and orientation of intervals in Y direction Distansya at oryentasyon ng mga pagitan sa direksyon Y - + Distance and orientation of intervals in Z direction Distansya at oryentasyon ng mga yugto sa direksyon ng Z - + Distance and orientation of intervals in Axis direction Distansya at oryentasyon ng mga laktaw sa direksyon ng Axis - + Center point Gitnang punto - + Angle to cover with copies Ang anggulo para mapasama sa mga kopya - + Specifies if copies must be fused (slower) Tinutukoy kung ang mga kopya ay dapat mapagsanib (mabagal) - + The path object along which to distribute objects Ang path na bagay kasama kung saan upang ipamahagi ang mga bagay - + Selected subobjects (edges) of PathObj Mga napiling subobject (mga gilid) ng PathObj - + Optional translation vector Opsyonal na paghuhulog sa ibang wikàng vector - + Orientation of Base along path Pagsasaayos ng Base sa landas - + X Location X kinaroroonan - + Y Location Y kinaroroonan - + Z Location Z katayuan - + Text string Teksto ng string - + Font file name Pangalan ng taludtod ng font - + Height of text Kataasan ng teksto - + Inter-character spacing Ibaon-kabanata spacing - + Linked faces Naka-ugnay na mga mukha - + Specifies if splitter lines must be removed Tinutukoy kung dapat tanggalin ang mga linya ng splitter - + An optional extrusion value to be applied to all faces Isang opsyonal na opsyon sa pagpilit na ilapat sa lahat ng mukha - + Height of the rectangle Taas ng rektanggulo - + Horizontal subdivisions of this rectangle Pahalang na mga subdivision ng rektanggulo na ito - + Vertical subdivisions of this rectangle Vertical subdivision ng rektanggulo na ito - + The placement of this object Ang kinatatayuan ng mga bagay na ito - + The display length of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The size of the arrows of this section plane Ang sukat ng palaso sa sekyon na ito ay patag - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Para sa mga Cutlines at Cutfaces anyo, nag-iiwan ito ng mga mukha sa lokasyon ng hiwa - + The base object is the wire, it's formed from 2 objects Ang base object ay ang kawad, nabuo ito mula sa 2 bagay - + The tool object is the wire, it's formed from 2 objects Ang kasangkapan na bagay ay ang kawad, nabuo ito mula sa 2 bagay - + The length of the straight segment Ang haba ng deretso na kaputol - + The point indicated by this label Ang puntong ipinahiwatig ng label na ito - + The points defining the label polyline Ang mga puntos na salaysayin sa polyline ng label - + The direction of the straight segment Ang tungo ng tuwid na segment - + The type of information shown by this label Ang uri ng impormasyong ipinapakita ng etiketa na ito - + The target object of this label Ang target na bagay ng label na ito - + The text to display when type is set to custom Ang teksto na ipapakita kapag ang uri ay naka-set sa custom - + The text displayed by this label Ang teksto na ipinapakita ng antas na ito - + The size of the text Ang sukat ng teksto - + The font of the text Ang harapan ng teksto - + The size of the arrow Ang anyo ng palaso - + The vertical alignment of the text Ang verticalpagpila ng teksto - + The type of arrow of this label Ang hichura ng palaso ng antas na ito - + The type of frame around the text of this object Ang uri ng kuwadro sa paligid ng teksto ng bagay na ito - + Text color Kolor ng teksto - + The maximum number of characters on each line of the text box Ang Kátaastaasan na bilang ng mga character sa bawat linya ng kahon ng teksto - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline Ang mga punto ng B-spline - + If the B-spline is closed or not Kapag ang B-spline ay sarado o hindi - + Tessellate Ellipses and B-splines into line segments Ang Tessellate Ellipses at B-splines sa mga bahagi ng linya - + Length of line segments if tessellating Ellipses or B-splines into line segments Ang haba ng mga bahagi ng linya kapag ang tessellating Ellipses o B-slpines sa mga bahagi ng linya - + If this is True, this object will be recomputed only if it is visible Kung ito ay may katotohanan, ang bagay na ito ay ikakalkula lamang muli kapag ito ay nakikita - + Base Base - + PointList PointList - + Count Bilang - + The objects included in this clone Ang mga bagay na nabibilang sa clone na ito - + The scale factor of this clone Ang laki ng kadahilanan ng clone na ito - + If this clones several objects, this specifies if the result is a fusion or a compound Kung nag-clone ang mga ito sa ilang mga bagay, tumutukoy ito sa kung ang resulta ay isang pagsasanib o isang tambalan - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Gulod - + Scale Timbangan - + Writing camera position Pagsusulat ng posisyon ng kamera - + Writing objects shown/hidden state Pagsusulat ng mga bagay na ipinapakita / nakatagong estado - + X factor X Isang bagay na katungkulan - + Y factor Y bagay na katungkulan - + Z factor Katungkulan ng Z - + Uniform scaling Magka-anyo scalling - + Working plane orientation Paggawa ng orientation ng eroplano @@ -781,20 +816,25 @@ Paki-install nang manu-mano ang dxf Library addon mula sa kasangkapan menu-> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Ang Slope para mabigyan ang mga napiling Wires / Mga Linya: 0 = pahalang, 1 = 45deg pataas, -1 = 45deg pababa + + + Create a clone + Lumikha ng kagaya + DraftShapeStringGui @@ -862,12 +902,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_AddConstruction - + Add to Construction group Idagdag sa grupo ng konstruksiyon - + Adds the selected objects to the Construction group Nagdaragdag ng mga napiling bagay sa grupo ng konsruksiyon @@ -875,12 +915,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_AddPoint - + Add Point Magdagdag ng dunggit - + Adds a point to an existing Wire or B-spline Nagdadagdag ng punto sa isang umiiral na Wire o B-spline @@ -888,12 +928,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_AddToGroup - + Move to group... Ilipat sa pangkat... - + Moves the selected object(s) to an existing group Inililipat ang (mga) piniling object sa isang umiiral na grupo @@ -901,12 +941,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_ApplyStyle - + Apply Current Style Ilapat ang Kasalukuyang Estilo - + Applies current line width and color to selected objects Nalalapat ang lapad at kulay ng kasalukuyang linya sa mga napiling bagay @@ -914,12 +954,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_Arc - + Arc Arko - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ mula sa kasangkapan menu-> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_Array - + Array Tanghal - + Creates a polar or rectangular array from a selected object Lumilikha ng isang polar o hugis-parihaba tanghal mula sa isang napiling bagay @@ -961,12 +1001,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_AutoGroup - + AutoGroup KusangGrupo - + Select a group to automatically add all Draft & Arch objects to Pumili ng isang grupo upang awtomatikong idagdag ang lahat ng mga bagay sa Draft & Arch sa @@ -974,12 +1014,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Lumilikha ng maramihang punto na B-spline. CTRL upang sumaklot, SHIFT upang pigilan @@ -987,12 +1027,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Lumilikha ng isang Bezier curve. CTRL sa snap, SHIFT upang pigilan @@ -1000,7 +1040,7 @@ mula sa kasangkapan menu-> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_Circle - + Circle Sirkulo - + Creates a circle. CTRL to snap, ALT to select tangent objects Lumilikha ng isang bilog. CTRL sa snap, ALT upang mapili ang mga bagay na padapuan @@ -1021,12 +1061,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_Clone - + Clone Gayahin - + Clones the selected object(s) Gayahin ang napiling bagay @@ -1034,12 +1074,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_CloseLine - + Close Line Saradong linya - + Closes the line being drawn Tinatapos ang linya na iguguhit @@ -1047,12 +1087,12 @@ mula sa kasangkapan menu-> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Alisin ang Dulo - + Removes a point from an existing Wire or B-spline Tinatanggal ang isang punto mula sa isang umiiral na Wire o B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Sukat - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Gumawa ng isang dimensyon. CTRL sa snap, SHIFT upang ipilit, ALT upang pumili ng isang segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Baba - + Explodes the selected objects into simpler objects, or subtracts faces Ang mga napiling bagay ay pinagsasama sa mas simpleng bagay, o binabawasan ang mga mukha @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draft to plano - + Convert bidirectionally between Draft and Sketch objects I-salin ang bidirectionally sa pagitan ng mga bagay ng Draft at Sketch @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Pag draw - + Puts the selected objects on a Drawing sheet Nilalagay ang mga napiling bagay sa isang piraso na Guhit @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit I-edit - + Edits the active object Ang mga pag-edit ng aktibong bagay @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Gumawa ng isang tambilugan. CTRL sa snap @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Pag-bind ng muka - + Creates a facebinder object from selected face(s) Gumawa ng isang facebinder object mula sa napiling mukha(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Tapusin ang linya - + Finishes a line without closing it Tinatapos ang isang linya nang hindi isinasara ito @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Naka baligtad na sukat - + Flip the normal direction of a dimension I-baligtad ang normal na direksyon ng isang sukat @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Gumamot - + Heal faulty Draft objects saved from an earlier FreeCAD version Gamutin ang may sira May mga bagay na naka-save na Draft mula sa mas maaga na bersyon ng FreeCAD @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Magtanda - + Creates a label, optionally attached to a selected object or element Gumawa ng isang etiketa, opsyonal na naka-attach sa isang napiling bagay o elemento + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Guhit - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Gumawa ng 2-point na linya. CTRL sa snap, SHIFT upang pigilan @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Salamin - + Mirrors the selected objects along a line defined by two points Salaman ang mga napiling bagay sa isang linya na tinukoy ng dalawang puntos @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Galawin - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Tabingi - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Naka-tabingi ang aktibong bagay. CTRL sa snap, SHIFT upang pigilan, ALT upang kopyahin @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Daan tanghal - + Creates copies of a selected object along a selected path. Gumawa ng mga kopya ng napiling bagay sa isang napiling landas. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Dunggot - + Creates a point object Lumilikha ng mga kopya ng napiling bagay sa isang napiling landas @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Gumawa ng isang regular na polygon. CTRL sa snap, SHIFT upang pigilan @@ -1353,13 +1401,13 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Taluhaba - + Creates a 2-point rectangle. CTRL to snap Gumawa ng 2-puntong rektanggulo. CTRL sa snap @@ -1367,12 +1415,12 @@ Taluhaba Draft_Rotate - + Rotate I-ikot - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Pinaikot ang mga napiling bagay. CTRL sa snap, SHIFT sa pagpigil, ALT lumilikha ng isang kopya @@ -1380,12 +1428,12 @@ Taluhaba Draft_Scale - + Scale Timbangan - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Tinitimbang ang mga napiling bagay mula sa base point. CTRL sa snap, SHIFT upang pigilan, ALT upang kopyahin @@ -1393,12 +1441,12 @@ Taluhaba Draft_SelectGroup - + Select group Piliin ang pangkat - + Selects all objects with the same parents as this group Pinipili ang lahat ng bagay na may parehong mga magulang bilang grupong ito @@ -1406,12 +1454,12 @@ Taluhaba Draft_SelectPlane - + SelectPlane PiliinPlane - + Select a working plane for geometry creation Pumili ng isang working plane para sa geometry creation @@ -1419,12 +1467,12 @@ Taluhaba Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Gumawa ng proxy object mula sa kasalukuyang eroplano - + Create Working Plane Proxy Gumawa ng Gumaganang Plane Proxy @@ -1432,12 +1480,12 @@ Taluhaba Draft_Shape2DView - + Shape 2D view Ihugis ang view ng 2D - + Creates Shape 2D views of selected objects Gumawa ng Mga 2D view ng mga napiling bagay @@ -1445,12 +1493,12 @@ Taluhaba Draft_ShapeString - + Shape from text... Hugis mula sa text... - + Creates text string in shapes. Gumawa ng text string sa mga hugis. @@ -1458,12 +1506,12 @@ Taluhaba Draft_ShowSnapBar - + Show Snap Bar Ipalabas ang Snap Bar - + Shows Draft snap toolbar Nagpapakita ng Dibuho snap toolbar @@ -1471,12 +1519,12 @@ Taluhaba Draft_Slope - + Set Slope Magtakda ng Slope - + Sets the slope of a selected Line or Wire Itinatakda ang slope ng isang napiling Line o Wire @@ -1484,12 +1532,12 @@ Taluhaba Draft_Snap_Angle - + Angles Mga anggulo - + Snaps to 45 and 90 degrees points on arcs and circles Nag-lagutok sa 45 at 90 degrees na puntos sa mga arko at lupon @@ -1497,12 +1545,12 @@ Taluhaba Draft_Snap_Center - + Center Sentro - + Snaps to center of circles and arcs Sikmat sa gitna ng mga bilog at arko @@ -1510,12 +1558,12 @@ Taluhaba Draft_Snap_Dimensions - + Dimensions Mga dimensyon - + Shows temporary dimensions when snapping to Arch objects Nagpapakita ng mga pansamantalang dimensyon kapag nag-snap sa mga bagay ng arko @@ -1523,12 +1571,12 @@ Taluhaba Draft_Snap_Endpoint - + Endpoint Kawakasan - + Snaps to endpoints of edges Sikmat sa layunin ng mga gilid @@ -1536,12 +1584,12 @@ Taluhaba Draft_Snap_Extension - + Extension Lawig - + Snaps to extension of edges Snaps sa lawig ng mga gilid @@ -1549,12 +1597,12 @@ Taluhaba Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Sikmat sa mga puntos ng grid @@ -1562,12 +1610,12 @@ Taluhaba Draft_Snap_Intersection - + Intersection Intersection - + Snaps to edges intersections Sikmat sa gilid interseksyon @@ -1575,17 +1623,17 @@ Taluhaba Draft_Snap_Lock - + Toggle On/Off I toggle ng patay/ bukas - + Activates/deactivates all snap tools at once Pinapagana at hindi pinapagana ang lahat ng mga snap kasangkapan nang sabay-sabay - + Lock Pangtrangká @@ -1593,12 +1641,12 @@ Taluhaba Draft_Snap_Midpoint - + Midpoint Gitnang puntos - + Snaps to midpoints of edges Lagutok sa midpoints ng mga gilid @@ -1606,12 +1654,12 @@ Taluhaba Draft_Snap_Near - + Nearest Pinaka- malapit - + Snaps to nearest point on edges Sikmat sa pinakamalapit na punto sa mga gilid @@ -1619,12 +1667,12 @@ Taluhaba Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Sikmat sa orthogonal at 45 grado direksyon @@ -1632,12 +1680,12 @@ Taluhaba Draft_Snap_Parallel - + Parallel Kapantay - + Snaps to parallel directions of edges Snaps sa Kapantay direksyon ng mga gilid @@ -1645,12 +1693,12 @@ Taluhaba Draft_Snap_Perpendicular - + Perpendicular Patirík - + Snaps to perpendicular points on edges Snaps sa mga patayong punto sa mga gilid @@ -1658,12 +1706,12 @@ Taluhaba Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Lagutok sa mga espesyal na lokasyon ng mga bagay @@ -1671,12 +1719,12 @@ Taluhaba Draft_Snap_WorkingPlane - + Working Plane Paggawa ng Plane - + Restricts the snapped point to the current working plane Pinipigilan ang punto na nakuha sa kasalukuyang eroplano @@ -1684,12 +1732,12 @@ Taluhaba Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1697,12 +1745,12 @@ Taluhaba Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Binabaluktot ang mga napiling bagay @@ -1710,12 +1758,12 @@ Taluhaba Draft_Text - + Text Letra - + Creates an annotation. CTRL to snap Lumilikha ng anotasyon. CTRL sa snap @@ -1723,12 +1771,12 @@ Taluhaba Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Lumilihis ang anyo ng Konstruksiyon para sa susunod na mga bagay. - + Toggle Construction Mode I-toggle ang anyo ng Konstruksiyon @@ -1736,12 +1784,12 @@ Taluhaba Draft_ToggleContinueMode - + Toggle Continue Mode I-toggle ang Magpatuloy anyo - + Toggles the Continue Mode for next commands. Mga toggle ang anyo ng Magpatuloy para sa mga susunod na utos. @@ -1749,12 +1797,12 @@ Taluhaba Draft_ToggleDisplayMode - + Toggle display mode I-toggle ang anyo ng display - + Swaps display mode of selected objects between wireframe and flatlines Ipakita ang mode ng display ng mga napiling bagay sa pagitan ng wireframe at flatlines @@ -1762,22 +1810,22 @@ Taluhaba Draft_ToggleGrid - + Toggle Grid I-toggle ang Grid - + Toggles the Draft grid on/off Mga toggle sa Draft grid sa on/off - + Grid Grid - + Toggles the Draft grid On/Off I-toggle ang Draft grid Bukas/Sarado @@ -1785,12 +1833,12 @@ Taluhaba Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Ang mga trim o nagpapalawak sa napiling bagay, o nagpapalabas ng nag-iisang mukha. CTRL snaps, SHIFT ay humahadlang sa kasalukuyang segment o sa normal, ALT inverts @@ -1798,12 +1846,12 @@ Taluhaba Draft_UndoLine - + Undo last segment I-undo ang huling segment - + Undoes the last drawn segment of the line being drawn Undoes ang huling iguguhit na bahagi ng linya na iguguhit @@ -1811,51 +1859,38 @@ Taluhaba Draft_Upgrade - + Upgrade Pag-tataas - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Kasama ang mga napiling bagay sa isa, o nag-convert ng saradong mga wire sa napuno na mga mukha, o nag-unite ng mga mukha - - Draft_VisGroup - - - VisGroup - VisGrupo - - - - Adds a VisGroup - Magsama ng VisGrupo - - Draft_Wire - - DWire - Dkawad + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Lumilikha ng maraming-point na DraftWire (DWire). CTRL sa snap, SHIFT upang pigilan + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Ang Wire sa B-spline - + Converts between Wire and B-spline Pagpapalit sa pagitan ng Wire at B-spline @@ -1863,22 +1898,22 @@ Taluhaba Gui::Dialog::DlgSettingsDraft - + General Draft Settings Pangkalahatang Mga Setting ng plano - + This is the default color for objects being drawn while in construction mode. Ito ang plano na kulay para sa mga bagay na iginuhit habang nasa mode ng konstruksiyon. - + This is the default group name for construction geometry Ito ang plano na pangalan ng grupo para sa geometry ng konstruksiyon - + Construction Pagtatayo @@ -1888,37 +1923,37 @@ Taluhaba I-impok ang kasalukuyang kulay at linewidth sa mga sesyon - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Kung ito ay naka-check, ang kopya mode ay pinananatiling buong command, kung hindi man ang mga utos ay palaging magsisimula sa mode na walang-kopya - + Global copy mode Global na kinupyang anyo - + Default working plane Plano na eroplano ng pagtatrabaho - + None Wala - + XY (Top) (Nangungunang) XY - + XZ (Front) (harapang) XZ - + YZ (Side) (dausdus) YZ @@ -1989,12 +2024,12 @@ such as "Arial:Bold" Pangkalahatang paglalagay - + Construction group name Pangalan ng pangkat ng konstruksiyon - + Tolerance Pahintulot @@ -2019,22 +2054,22 @@ such as "Arial:Bold" Dito maaari mong tukuyin ang isang direktoryo na naglalaman ng mga file na SVG na naglalaman ng mga <pattern> na mga kahulugan na maaaring idagdag sa karaniwang mga pattern ng Draft hatch - + Draft interface mode Draft interface anyo - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Ito ang anyo ng UI kung saan ang module ng Draft ay gagana: Ilalagay ng mode ng Toolbar ang lahat ng mga setting ng Draft sa isang hiwalay na toolbar, habang gagamit ng modebar ang FreeCAD Taskview system para sa lahat ng pakikipag-ugnayan ng user nito - + Toolbar Gamit ng bar - + Taskview Tinganan ang task @@ -2064,12 +2099,12 @@ such as "Arial:Bold" Alt Mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Karaniwan, pagkatapos ng pagkopya ng mga bagay, napili ang mga kopya. Kung ang pagpipiliang ito ay naka-check, ang mga base na bagay ay pipiliin sa halip. - + Select base objects after copying Piliin ang mga base object pagkatapos ng pagkopya @@ -2104,7 +2139,7 @@ such as "Arial:Bold" Ang mga pangunahing linya ay mapapalapot. Tukuyin dito kung gaano karaming mga parisukat sa pagitan ng mga pangunahing linya. - + Internal precision level Panloob na antas ng katumpakan @@ -2219,12 +2254,12 @@ such as "Arial:Bold" Isalin ang puting linya ng linya sa itim - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Kapag nasuri ito, ang mga kasangkapan sa Draft ay lilikha ng Mga primitibong Bahagi sa halip na mga bagay sa Draft, kapag available. - + Use Part Primitives when available Gamitin ang Part Primitives kapag Napapakinabangan @@ -2244,12 +2279,7 @@ such as "Arial:Bold" Palaging snap (huwag paganahin ang sikmat mod) - - Construction geometry - Konstruksiyon Heometría - - - + Construction geometry color Kulay ng Heometría ng konstruksiyon @@ -2389,7 +2419,7 @@ such as "Arial:Bold" Pumili ng harapan na file - + Fill objects with faces whenever possible Punan ang mga bagay na may mga mukha hangga't maaari @@ -2679,7 +2709,7 @@ such as "Arial:Bold" Awtomatikong pag-update (lamang na importer ng pamana) - + Prefix labels of Clones with: Mga etiketa ng Prefix ng Mga panggagaya sa: @@ -2718,7 +2748,7 @@ Hal: para sa mga file sa millimeters: 1, sa mga sentimetro: 10, sa metro: 1000, Ito ang pamamaraan na pinili para sa pag-aangkat ng kulay ng SVG object sa FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Kung ito ay naka-check, ang mga bagay ay lilitaw bilang napunan bilang default. Kung hindi, lilitaw ang mga ito bilang wireframe @@ -2798,17 +2828,7 @@ Hal: para sa mga file sa millimeters: 1, sa mga sentimetro: 10, sa metro: 1000, Kung ito ay umampat, ang mga bagay mula sa parehong mga layer ay sumali sa Draft Blocks, pag-on ng display nang mas mabilis, ngunit ginagawa itong mas madaling mae-edit - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate Sa pagguhit ng mga linya, magtakda ng pagtuon sa Haba sa halip na X coordinate @@ -2888,12 +2908,12 @@ Hal: para sa mga file sa millimeters: 1, sa mga sentimetro: 10, sa metro: 1000, Bahagi ng Max Spline: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2904,697 +2924,843 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Konstruksyon geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Sarado + + + + O + O + + + + Copy + Kopya + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Haba + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + Exis + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft sikmat - - - Draft creation tools - Draft mga kasangkapan sa paglikha - - - - Draft modification tools - Draft mga kasangkapan sa pagbabago - - - - Utilities - Mga kagamitan - - - - Wire tools - Mga Kasangkapan ng kawad - - - - Snapping - Pagpitik - draft - + not shape found hindi nahanap ang hugis - + All Shapes must be co-planar Lahat ng Mga korte ay dapat na co-planar - + The given object is not planar and cannot be converted into a sketch. Ang ibinigay na bagay ay hindi planar at hindi maaaring i-convert sa sketch. - + Unable to guess the normal direction of this object Hindi ma-hulaan ang normal na direksyon ng bagay na ito - + Draft Command Bar Planong Command Bar - + Toggle construction mode Magpalipat-lipat sa mode ng konstruksiyon - + Current line color Kulay ng kasalukuyang linya - + Current face color Karániwan kulay ng mukha - + Current line width Lapad ng kasalukuyang linya - + Current font size Kasalukuyang laki ng harapan - + Apply to selected objects Mag-apply sa mga napiling bagay - + Autogroup off I-off ang Autogroup - + active command: aktibong command: - + None Wala - + Active Draft command Aktibong Draft command - + X coordinate of next point X Kaayos ng susunod na punto - + X Exis - + Y Y - + Z Z - + Y coordinate of next point Y ayos ng susunod na punto - + Z coordinate of next point Z Kaayos ng susunod na Dulo - + Enter point Ipasok ang dulo - + Enter a new point with the given coordinates Magpasok ng isang bagong dulo sa ibinigay na mga kaayos - + Length Haba - + Angle Anggulo - + Length of current segment Haba ng kasalukuyang Bahagi ng isang kabilugan - + Angle of current segment Anggulo ng kasalukuyang Bahagi ng isang kabilugan - + Radius Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog - + Radius of Circle Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog of Circle - + If checked, command will not finish until you press the command button again Kung nasusuri, ang command ay hindi matapos hanggang sa pindutin mo muli ang command button - + If checked, an OCC-style offset will be performed instead of the classic offset Kung naka-check, ang isang offset na estilo ng OCC ay gagawa sa halip na ang classic na offset - + &OCC-style offset &Offset ng estilo ng OCC - + Add points to the current object Magdagdag ng mga punto sa kasalukuyang bagay - + Remove points from the current object Alisin ang mga dulo mula sa kasalukuyang bagay - + Make Bezier node sharp Gawing matalim ang Bezier node - + Make Bezier node tangent Gumawa ng Bezier node tangent - + Make Bezier node symmetric Gawin ang Bezier node symmetric - + Sides Mga gilid - + Number of sides Bilang ng mga panig - + Offset Tabingi - + XY (top) XY (itaas) - - Select XY plane - Piliin ang XY plane - - - + XZ (front) XZ (mukha) - - Select XZ plane - Piliin ang XZ eroplano - - - + YZ (side) YZ (panig) - - Select YZ plane - Piliin ang YZ plane - - - + View Masdan - - Select plane perpendicular to the current view - Piliin ang patayong patayo sa kasalukuyang tanaw - - - + Auto Kusa - - Do not project points to a drawing plane - Huwag i-project ang mga puntos sa isang eroplanong pagguhit - - - + Text string to draw Teksto ng string upang gumuhit - + String String - + Height of text Kataasan ng teksto - + Height Taas - + Intercharacter spacing Intercharacter espasyo - + Tracking Pag-sunod - + Full path to font file: Buong landas sa file ng harap: - + Open a FileChooser for font file Buksan ang isang paghahanapan ng file para sa file ng font - + Grid spacing Espasyo ng grid - + The spacing between the grid lines Ang agwat sa pagitan ng mga linya ng grid - + Main line every Pangunahing bawat guhit - + The number of lines between main lines Ang bilang ng mga guhit sa pagitan ng mga pangunahing guhit - + Center plane on view Patnubay sa plane center - - Select Plane - Piliin ang Plane - - - + Line Guhit - + DWire Dkawad - + Circle Sirkulo - + Center X Kalahatian x - + Arc Arko - + Point Dunggot - + Label Magtanda - + Distance Distance - + Trim Mahusay - + Pick Object Pumili ng layon - + Edit I-edit - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Pampook na x - + Local Y Pampook na y - + Local Z Pampook na x - + Invalid Size value. Using 200.0. Di-wastong halaga ng Sukat. Paggamit ng 200.0. - + Invalid Tracking value. Using 0. Di-wastong halaga ng Pagsubaybay. Paggamit ng 0. - + Please enter a text string. Mangyaring maglagay ng tali sa teksto. - + Select a Font file Pumili ng harap file - + Please enter a font file. Mangyaring magpasok ng isang font na file. - + Autogroup: Autogroup: - + Faces Faces - + Remove Ihiwalay - + Add Magdugtong - + Facebinder elements Mga pasimulang aral ng Facebinder - + Create Line Lumikha ng guhit - - Pick next point: - - Pumili ng susunod na Dulo: - - - - + Convert to Wire Isalin tungo sa kawad - + BSpline BSplinya - + BezCurve BezCurve - + Create BezCurve Gumawa ng BezCurve - + Rectangle Taluhaba - + Create Plane Gumawa ng eroplano - + Create Rectangle Gumawa ng parihaba - + Create Circle Lumalang ng bilog - + Create Arc Gumawa ng arko - + Start Angle Magsimula sa anggulo - + Aperture Puwang - + Polygon Polygon - + Create Polygon Gumawa ng polygon - + Ellipse Ellipse - + Create Ellipse Gumawa ng tambilogan - + Text Letra - + Create Text Gumawa ng teksto - + Dimension Sukat - + Create Dimension Gumawa ng sukat - + ShapeString Korte ng String - + Create ShapeString Gumawa ng ShapeString - + Copy Kopya - + Move Galawin - + Change Style Pagbabago ng Estilo - + Rotate I-ikot - - Cannot offset this object type - - Hindi mai-offset ang uri ng bagay na ito - - - - + Stretch Stretch - + Upgrade Pag-tataas - + Downgrade Baba - + Selection is not a Knot Ang pagpili ay hindi isang Knot - + Convert to Sketch Isalin sa disenyo - + Convert to Draft Isalin tungo sa draft - + Convert Isalin - + Array Tanghal - + Create Point Lumikha ng Point - + Mirror Salamin - + &Draft &Draft @@ -3618,179 +3784,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Sarado @@ -3835,7 +4001,7 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Restrict Z - + Select edge Select edge @@ -3850,7 +4016,7 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Length mode - + Wipe Wipe @@ -3865,454 +4031,279 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Tapos na - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Pangunahin - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Lumikha ng B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4322,56 +4313,354 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Timbangan - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Tugatog + + + + Front + Harap + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Kusa + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Pag-ikot + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Draft + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Mga kagamitan + + + + Wire tools + Mga Kasangkapan ng kawad + + + + Snapping + Pagpitik + diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 932f563f48..fbc7fa2ae4 100755 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index c9dd6fbe1a..ba887693b9 100755 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Définit un motif de hachure - + Sets the size of the pattern Définit la taille du motif - + Startpoint of dimension Point de départ de dimension - + Endpoint of dimension Point de terminaison de dimension - + Point through which the dimension line passes Point que traverse la ligne de cote - + The object measured by this dimension L’objet mesuré par cette cote - + The geometry this dimension is linked to La géométrie à laquelle cette dimension est liée - + The measurement of this dimension La mesure de cette cote - + For arc/circle measurements, false = radius, true = diameter Pour les mesures de l’arc/cercle, false = rayon, true = diamètre - + Font size Taille de police - + The number of decimals to show Le nombre de décimales à afficher - + Arrow size Taille de la flèche - + The spacing between the text and the dimension line L’espacement entre le texte et la ligne de cote - + Arrow type Type de flèche - + Font name Nom de la police - + Line width Largeur de ligne - + Line color Couleur de ligne - + Length of the extension lines Longueur des lignes d’attache - + Rotate the dimension arrows 180 degrees Faire pivoter la cote de 180 degrés - + Rotate the dimension text 180 degrees Faire pivoter le texte de la cote de 180 degrés - + Show the unit suffix Afficher le suffixe de l'unité - + The position of the text. Leave (0,0,0) for automatic position La position du texte. Laisser (0,0,0) pour un positionnement automatique - + Text override. Use $dim to insert the dimension length Substitution de texte. Utilisez $dim pour insérer la longueur de la dimension - + A unit to express the measurement. Leave blank for system default Une unité pour exprimer la mesure. Laissez vide pour utiliser l'unité par défaut du système - + Start angle of the dimension Angle de départ de la dimension - + End angle of the dimension Angle de fin de la dimension - + The center point of this dimension Le point central de cette dimension - + The normal direction of this dimension La direction normale de cette dimension - + Text override. Use 'dim' to insert the dimension length Substitution de texte. Utilisez $dim pour insérer la longueur de la dimension - + Length of the rectangle Longueur du rectangle - + Radius to use to fillet the corners Rayon à utiliser pour arrondir les coins - + Size of the chamfer to give to the corners Taille du chanfrein à attribuer aux coins - + Create a face Créer une face - + Defines a texture image (overrides hatch patterns) Définit une image de texture (écrase les hachures) - + Start angle of the arc Angle de départ de l’arc - + End angle of the arc (for a full circle, give it same value as First Angle) Angle de fin de l’arc (pour un cercle complet, donner la même valeur que le premier angle) - + Radius of the circle Rayon du cercle - + The minor radius of the ellipse Le petit rayon de l’ellipse - + The major radius of the ellipse Le grand rayon de l’ellipse - + The vertices of the wire Les sommets du fil - + If the wire is closed or not Si le fil est fermé ou non - + The start point of this line Le point de départ de cette ligne - + The end point of this line Le point d'arrivée de cette ligne - + The length of this line La longueur de cette ligne - + Create a face if this object is closed Créer une face si cet objet est fermé - + The number of subdivisions of each edge Le nombre de subdivisions de chaque bord - + Number of faces Nombre de faces - + Radius of the control circle Rayon du cercle de contrôle - + How the polygon must be drawn from the control circle Comment le polygone doit être dessiné à partir du cercle de contrôle - + Projection direction Direction de projection - + The width of the lines inside this object La largeur des lignes à l’intérieur de cet objet - + The size of the texts inside this object La taille des textes à l’intérieur de cet objet - + The spacing between lines of text L’espacement entre les lignes de texte - + The color of the projected objects La couleur des objets projetés - + The linked object L’objet lié - + Shape Fill Style Style de remplissage de la forme - + Line Style Style de ligne - + If checked, source objects are displayed regardless of being visible in the 3D model Si cochée, les objets source sont affichés quelle que soit leur visibilité dans le modèle 3D - + Create a face if this spline is closed Créer une face si cette spline est fermée - + Parameterization factor Facteur de paramétrage - + The points of the Bezier curve Les points de la courbe de Bézier - + The degree of the Bezier function Le degré de la fonction de Bézier - + Continuity Continuité - + If the Bezier curve should be closed or not Si la courbe de Bézier doit être fermée ou pas - + Create a face if this curve is closed Créer une face si cette courbe est fermée - + The components of this block Les composants de ce bloc - + The base object this 2D view must represent L’objet de base que doit représenter cette vue 2D - + The projection vector of this object Le vecteur de projection de cet objet - + The way the viewed object must be projected La façon dont l’objet vu doit être projeté - + The indices of the faces to be projected in Individual Faces mode Les indices des faces à projeter en mode Faces individuelles - + Show hidden lines Afficher les lignes masquées - + The base object that must be duplicated L’objet de base qui doit être dupliqué - + The type of array to create Le type de tableau à créer - + The axis direction La direction de l’axe - + Number of copies in X direction Nombre de copies dans la direction X - + Number of copies in Y direction Nombre de copies dans la direction Y - + Number of copies in Z direction Nombre de copies dans la direction Z - + Number of copies Nombre de copies - + Distance and orientation of intervals in X direction Distance et orientation des intervalles dans la direction X - + Distance and orientation of intervals in Y direction Distance et orientation des intervalles dans la direction Y - + Distance and orientation of intervals in Z direction Distance et orientation des intervalles dans la direction Z - + Distance and orientation of intervals in Axis direction Distance et orientation des intervalles dans la direction des Axes - + Center point Point de centre - + Angle to cover with copies Angle à couvrir avec les copies - + Specifies if copies must be fused (slower) Spécifie si les copies doivent être fusionnées (plus lent) - + The path object along which to distribute objects L’objet trajectoire le long duquel distribuer des objets - + Selected subobjects (edges) of PathObj Sous-objets sélectionnés (edges) de PathObj - + Optional translation vector Vecteur de translation optionnel - + Orientation of Base along path Orientation de Base le long de la trajectoire - + X Location Localisation en X - + Y Location Localisation en Y - + Z Location Localisation en Z - + Text string Chaîne de texte - + Font file name Nom du fichier de police - + Height of text Hauteur du texte - + Inter-character spacing Espacement entre les caractères - + Linked faces Faces liées - + Specifies if splitter lines must be removed Spécifie si les lignes sécantantes doivent être supprimés - + An optional extrusion value to be applied to all faces Une valeur d’extrusion optionnelle à appliquer à toutes les faces - + Height of the rectangle Hauteur du rectangle - + Horizontal subdivisions of this rectangle Subdivisions horizontales de ce rectangle - + Vertical subdivisions of this rectangle Subdivisions verticales de ce rectangle - + The placement of this object Le positionnement de cet objet - + The display length of this section plane La longueur d'affichage de ce plan de coupe - + The size of the arrows of this section plane La taille des flèches de ce plan de coupe - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location En mode Cutlines ou Cutfaces, cela laisse le résultat à la position de la coupe - + The base object is the wire, it's formed from 2 objects L’objet de base est le fil, il est formé de 2 objets - + The tool object is the wire, it's formed from 2 objects L’objet outil est le fil, il est formé de 2 objets - + The length of the straight segment La longueur du segment droit - + The point indicated by this label Le point marqué par cette étiquette - + The points defining the label polyline Les points définissant l'étiquette polyligne - + The direction of the straight segment La direction du segment droit - + The type of information shown by this label Le type d’information montré par cette étiquette - + The target object of this label L’objet marqué par cette étiquette - + The text to display when type is set to custom Le texte à afficher lorsque le type est défini à personnalisé - + The text displayed by this label Le texte affiché par ce label - + The size of the text La taille du texte - + The font of the text La police de caractère du texte - + The size of the arrow Taille de la flèche - + The vertical alignment of the text Alignement vertical du texte - + The type of arrow of this label Le type de flèche de cette étiquette - + The type of frame around the text of this object Le type de cadre autour du texte de cet objet - + Text color Couleur du texte - + The maximum number of characters on each line of the text box Le nombre maximum de caractères de chaque ligne de la zone de texte - + The distance the dimension line is extended past the extension lines La distance de la ligne de cote est prolongée au-delà des lignes d'attache - + Length of the extension line above the dimension line Longueur de la ligne d’attache au-dessus de la ligne de cote - + The points of the B-spline Les points de la courbe (B-spline) - + If the B-spline is closed or not Si la courbe B-spline est fermée ou non - + Tessellate Ellipses and B-splines into line segments Approximer les ellipses et les courbes B-splines par des segments de ligne - + Length of line segments if tessellating Ellipses or B-splines into line segments Longueur des segments de ligne si approximation des ellipses ou des courbes B-splines par des segments de ligne - + If this is True, this object will be recomputed only if it is visible Si Vrai, cet objet ne sera recalculé que s'il est visible - + Base Base - + PointList Liste de points - + Count Nombre - + The objects included in this clone Les objets inclus dans ce clone - + The scale factor of this clone Le facteur d’échelle de ce clone - + If this clones several objects, this specifies if the result is a fusion or a compound Si cela clone plusieurs objets, cette option indique si le résultat est une fusion ou un composé - + This specifies if the shapes sew Cette option indique si les formes coudre - + Display a leader line or not Afficher une ligne de repère ou non - + The text displayed by this object Le texte affiché par cet objet - + Line spacing (relative to font size) Interligne (par rapport à la taille de police) - + The area of this object - The area of this object + Surface de cet objet - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Afficher un symbole de cotation à la fin du fil - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusionner mur et objets structure de même type et matériel + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Pente - + Scale Échelle - + Writing camera position Écrire la position de la caméra - + Writing objects shown/hidden state Écrire l'état afficher/cacher des objets - + X factor Facteur X - + Y factor Facteur Y - + Z factor Facteur Z - + Uniform scaling Mise à l'échelle uniforme - + Working plane orientation Orientation du plan travail @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager Le téléchargement de bibliothèques dxf a échoué. Veuillez installer l’addon de bibliothèque dxf manuellement depuis le menu Outils -> gestionnaire d'extensions - + This Wire is already flat Ce fil est déjà plat - + Pick from/to points Choisir des/aux points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Pente à donner aux fils/lignes sélectionnés : 0 = horizontal, 1 = 45deg vers le haut, -1 = 45deg vers le bas + + + Create a clone + Créer un clone + DraftShapeStringGui @@ -844,28 +884,28 @@ from menu Tools -> Addon Manager Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Entrez les coordonnées ou sélectionnez un point à l’aide de la souris. Reset 3d point selection - Reset 3d point selection + Réinitialiser la sélection du point 3D Reset Point - Reset Point + Réinitialiser le point Draft_AddConstruction - + Add to Construction group Ajouter au groupe de Construction - + Adds the selected objects to the Construction group Ajoute les objets sélectionnés au groupe de Construction @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Ajouter un point - + Adds a point to an existing Wire or B-spline Ajoute un point à un fil ou une courbe B-spline existant @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Déplacer dans un groupe... - + Moves the selected object(s) to an existing group Déplace l'objet ou les objets sélectionnés vers un groupe existant @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Appliquer le style actuel - + Applies current line width and color to selected objects Appliquer l'épaisseur et la couleur de ligne actuelles aux objets sélectionnés @@ -912,46 +952,46 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Arc - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Crée un arc à partir du centre et du rayon. Ctrl pour attirer, Majuscule pour contraindre Draft_ArcTools - + Arc tools - Arc tools + Outils Arc Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arc par 3 points - + Creates an arc by 3 points - Creates an arc by 3 points + Crée un arc passant par 3 points Draft_Array - + Array Réseau - + Creates a polar or rectangular array from a selected object Crée un réseau polaire ou rectangulaire à partir d'un objet sélectionné @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Sélectionner un groupe pour y ajouter automatiquement tous les objets Draft & Arch @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Crée une courbe B-spline avec multiples points. CTRL pour aimanter, SHIFT pour contraindre @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Courbe de Bézier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Crée une courbe de Bézier. CTRL pour aimanter, SHIFT pour contraindre @@ -998,20 +1038,20 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + Outils Bézier Draft_Circle - + Circle Cercle - + Creates a circle. CTRL to snap, ALT to select tangent objects Crée un cercle. CTRL pour accrocher aux objets, MAJ pour contraindre @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Clone - + Clones the selected object(s) Clone les objets sélectionnés @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Fermer la ligne - + Closes the line being drawn Fermer la ligne actuelle @@ -1045,27 +1085,27 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + Courbe de Bezier cubique - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Crée une courbe de Bézier cubique +Cliquer et glisser pour définir les points de contrôle. Ctrl pour attirer, Majuscule pour contraindre Draft_DelPoint - + Remove Point Supprimer un point - + Removes a point from an existing Wire or B-spline Supprime un point d’un fil ou d’une courbe B-spline existant @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Cote - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crée une cote. CTRL pour accrocher aux objets, MAJ pour contraindre, ALT pour sélectionner un segment @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Rétrograder - + Explodes the selected objects into simpler objects, or subtracts faces Éclate les objets sélectionnés en objets plus simples, ou soustrait des faces @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draft vers Esquisse - + Convert bidirectionally between Draft and Sketch objects Conversion bidirectionnelle entre objets draft et esquisse @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Dessin - + Puts the selected objects on a Drawing sheet Place les objets sélectionnés sur une feuille de dessin @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Éditer - + Edits the active object Édite l'objet actif @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Modification améliorée - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Modifie les objets sélectionnés Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Crée une ellipse. CTRL pour aimanter @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Face(s) liée(s) - + Creates a facebinder object from selected face(s) Crée un objet Face liée à partir de face(s) sélectionnée(s) @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Terminer la ligne - + Finishes a line without closing it Terminer la ligne sans la fermer @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inverser la direction de la cote - + Flip the normal direction of a dimension Inverser le sens d’écriture d'une cote @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Réparer - + Heal faulty Draft objects saved from an earlier FreeCAD version Réparer les objets de type Draft défectueux enregistrés avec une version antérieure de FreeCAD @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Joindre - + Joins two wires together Réunit deux fils @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Étiquette - + Creates a label, optionally attached to a selected object or element Crée une étiquette, éventuellement liée à un élément ou un objet sélectionné + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Ligne - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crée une ligne par deux points. CTRL pour accrocher aux objets, Maj pour contraindre @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Miroir - + Mirrors the selected objects along a line defined by two points Effectue une symétrie en miroir des objets sélectionnés le long d'une ligne définie par deux points @@ -1273,25 +1321,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Déplacer - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Déplace les objets sélectionnés entre 2 points. Ctrl pour attirer, Majuscule pour contraindre Draft_Offset - + Offset Décalage - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Décale l'objet actif. CTRL pour accrocher, Maj pour contraindre, Alt pour copier @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Chemin pour série de formes - + Creates copies of a selected object along a selected path. Crée une série de copies d’un objet sélectionné le long d'un tracé sélectionné. @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Point - + Creates a point object Crée un objet point @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Matrice de points - + Creates copies of a selected object on the position of points. Crée des copies d’un objet sélectionné sur la position des points. @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygone - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crée un polygone régulier. CTRL pour accrocher, Maj pour contraindre @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rectangle - + Creates a 2-point rectangle. CTRL to snap Crée un rectangle par deux points. CTRL pour accrocher aux objets @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Pivoter - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Faire pivoter les objets sélectionnés. CTRL pour accrocher, MAJ pour contraindre, ALT pour créer une copie @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Échelle - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Change l'échelle des objets sélectionnés à partir d'un point de base. CTRL pour accrocher, MAJ pour contraindre, ALT pour copier @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Sélectionner le groupe - + Selects all objects with the same parents as this group Sélectionne tous les objets avec les mêmes parents que ce groupe @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Plan de travail - + Select a working plane for geometry creation Choisir un plan de travail pour la création d'objets 2D @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Crée un objet proxy à partir du plan de travail actuel - + Create Working Plane Proxy Crée un proxy pour le Plan de Travail @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Projection 2D d'une forme - + Creates Shape 2D views of selected objects Crée une projection 2D d'objets sélectionnés @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Formes à partir de texte… - + Creates text string in shapes. Crée une forme à partir d’une chaîne textuelle. @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Monter la barre d'accrochage - + Shows Draft snap toolbar Montrer la barre d'outils d'accrochage @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Définir la valeur de la pente - + Sets the slope of a selected Line or Wire Définit la pente d’une ligne ou d'un fil sélectionné @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Aimante aux points à 45° et 90° de cercles ou arcs de cercle @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centre - + Snaps to center of circles and arcs Aimante au centre des cercles et des arcs @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Affiche des dimensions provisoires lors de l'aimantation aux objets Arch @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Terminaison - + Snaps to endpoints of edges S’accroche aux extrémités des arêtes @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges S’accroche sur le prolongement des lignes @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grille - + Snaps to grid points S’accroche aux points de grille @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersection - + Snaps to edges intersections S’accroche aux intersections des arêtes @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Activer/désactiver l'accrochage - + Activates/deactivates all snap tools at once Active/désactive tous les outils d’accrochage en une fois - + Lock Verrouiller @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Milieu - + Snaps to midpoints of edges S’accroche en milieu d’arête @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Le plus proche - + Snaps to nearest point on edges S’accroche sur l'arête au point le plus proche @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orthogonalement - + Snaps to orthogonal and 45 degrees directions S’accroche perpendiculairement ou à 45 degrés @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallèle - + Snaps to parallel directions of edges S’accroche parallèlement aux arêtes @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendiculaire - + Snaps to perpendicular points on edges S’accroche perpendiculairement aux arêtes @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Spécial - + Snaps to special locations of objects S’accroche à des emplacements spécifiques d’objets @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plan de travail - + Restricts the snapped point to the current working plane Limite le point ancré au plan de travail actuel @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Scinder - + Splits a wire into two wires Divise un fil en deux fils @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Étirer - + Stretches the selected objects Étire les objets sélectionnés @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Texte - + Creates an annotation. CTRL to snap Crée une annotation. CTRL pour accrocher aux objets @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Bascule en mode construction pour les prochains objets. - + Toggle Construction Mode Basculer en Mode Construction @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Inverser le mode Continuer - + Toggles the Continue Mode for next commands. Bascule le mode Continu pour les prochaines commandes. @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Bascule le mode d'affichage - + Swaps display mode of selected objects between wireframe and flatlines Bascule le mode d'affichage des objets sélectionnés entre filaire ou ombré @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Basculer l'affichage de la grille - + Toggles the Draft grid on/off Active/désactive la grille - + Grid Grille - + Toggles the Draft grid On/Off Active/désactive la grille @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Ajuste ou prolonge l'objet sélectionné, ou extrude les faces simples. CTRL active l'accrochage, Maj contraint au segment courant ou à la normale, Alt inverse @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Annuler le dernier segment - + Undoes the last drawn segment of the line being drawn Annuler le dernier segment de la ligne actuelle @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Mettre à niveau - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joint les objets sélectionnés en un seul, ou convertit les lignes fermées en faces pleines, ou unit les faces - - Draft_VisGroup - - - VisGroup - GroupeVisu - - - - Adds a VisGroup - Ajoute un GroupeVisu - - Draft_Wire - - DWire - Filaire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crée un filaire à plusieurs points. CTRL pour forcer l'accrochage, MAJ pour contraindre. + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Filaire vers B-Spline - + Converts between Wire and B-spline Conversion entre Filaire et B-Spline @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Réglages généraux Draft - + This is the default color for objects being drawn while in construction mode. La couleur par défaut pour les objets en cours de conception en mode construction. - + This is the default group name for construction geometry Le nom du groupe par défaut pour les géométries de construction - + Construction Construction @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainEnregistrer la couleur et la largeur de ligne actuelles pour toutes les sessions - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Si cette case est cochée, le mode copie sera conservée dans la commande, sinon les commandes seront toujours démarrées sans le mode copie - + Global copy mode Mode de copie global - + Default working plane Plan de travail par défaut - + None Aucun - + XY (Top) XY (dessus) - + XZ (Front) XZ (face) - + YZ (Side) YZ (côté) @@ -1987,12 +2022,12 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Paramètres généraux - + Construction group name Nom du groupe de construction - + Tolerance Tolérance @@ -2017,22 +2052,22 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Spécifier un répertoire contenant des fichiers SVG de motifs de hachures qui peuvent être ajoutées aux définitions de hachures standards - + Draft interface mode Mode d'interface Draft - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Il s'agit du mode d'interface utilisateur de l'atelier Draft : le mode barre d'outils place tous les paramètres Draft dans une barre d'outils distincte, tandis que le mode de vue Tâches utilisera le système Vue Tâches de FreeCAD pour toutes les interactions avec l'utilisateur - + Toolbar Barre d'outils - + Taskview Vue Tâches @@ -2062,13 +2097,13 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Mode Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalement, après avoir copié les objets, les copies seront sélectionnées. Si cette option est cochée, les objets de base seront plutôt sélectionnés. - + Select base objects after copying Sélectionner les objets de base après la copie @@ -2103,7 +2138,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Les traits de lignes principales seront plus épais. Spécifiez ici le nombre de carreaux entre les lignes principales. - + Internal precision level Niveau de précision interne @@ -2218,12 +2253,12 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Imprimer les lignes blanches en noir - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Lorsque cette case est cochée, les outils Draft créeront des objets Part de type primitives au lieu des objets Draft, lorsque disponible. - + Use Part Primitives when available Utiliser des primitives de pièces si possible @@ -2243,12 +2278,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Toujours ancré (désactiver le mode ancrage) - - Construction geometry - Géométrie de construction - - - + Construction geometry color Couleur de la géométrie de construction @@ -2388,7 +2418,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Sélectionnez un fichier de police - + Fill objects with faces whenever possible Remplir des objets avec des faces si possible @@ -2678,7 +2708,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Mise à jour automatique (ancien importateur uniquement) - + Prefix labels of Clones with: Préfixer les étiquettes de Clones avec : @@ -2717,7 +2747,7 @@ Ex : pour les fichiers en millimètres : 1, en centimètres : 10, en mètres Il s’agit de la méthode choisie pour importer un objet SVG couleur dans FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Si cette case est cochée, les objets apparaîtront comme rempli par défaut. Dans le cas contraire, ils apparaîtront comme filaire @@ -2797,17 +2827,7 @@ Ex : pour les fichiers en millimètres : 1, en centimètres : 10, en mètres Si cette case est cochée, les objets provenant du même calque seront fusionnés, cela rends l'affichage plus réactif, mais l'édition plus complexe - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Si cette case est cochée, les instructions étape par étape seront affichées dans la fenêtre de sortie lorsque vous exécutez des commandes d'esquisse - - - - Verbose command line mode - Mode ligne de commande détaillé - - - + When drawing lines, set focus on Length instead of X coordinate Lors du dessin de lignes, définir le focus sur la longueur au lieu de la coordonnée X @@ -2887,711 +2907,857 @@ Ex : pour les fichiers en millimètres : 1, en centimètres : 10, en mètres Nombre max de segment par spline: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Nombre de décimales pour les opérations internes sur les coordonnées (par ex. 3 = 0,001). Les valeurs entre 6 et 8 sont habituellement considérée comme le meilleurs compromis par les utilisateurs de FreeCAD. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Ceci est la valeur utilisée par les fonction qui utilisent une tolérance. +Les valeurs ayant des différences inférieures à cette valeur sont considérées comme identiques. Cette valeur sera bientôt rendue obsolète afin que le niveau de précision ci-dessus les contrôle toutes deux. Use legacy python exporter - Use legacy python exporter + Utiliser l’ancien exportateur python + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Géométrie de construction + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continuer + + + + T + T + + + + Close + Fermer + + + + O + O + + + + Copy + Copie + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Remplir + + + + L + L + + + + Exit + Sortie + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Longueur + + + + H + H + + + + Wipe + Effacer + + + + W + W + + + + Set WP + Définir le plan de travail + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restreindre les X + + + + X + X + + + + Restrict Y + Restreindre les Y + + + + Y + Y + + + + Restrict Z + Restreindre les Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Accrochage Draft - - - Draft creation tools - Outils de création de Draft - - - - Draft modification tools - Outils de modification de Draft - - - - Utilities - Utilitaires - - - - Wire tools - Outils de filaires - - - - Snapping - Accrochage - draft - + not shape found aucune forme trouvée - + All Shapes must be co-planar Toutes les formes doivent être coplanaires - + The given object is not planar and cannot be converted into a sketch. L'objet donné n'est pas plan et ne peut pas être converti en esquisse. - + Unable to guess the normal direction of this object Incapable d'évaluer la direction normale de cet objet - + Draft Command Bar Barre de commandes Draft - + Toggle construction mode Basculer en mode construction - + Current line color Couleur de la ligne - + Current face color Couleur de face actuelle - + Current line width Largeur de la ligne actuelle - + Current font size Taille de caractère actuelle - + Apply to selected objects Appliquer aux objets sélectionnés - + Autogroup off Autogroup désactivé - + active command: commande active : - + None Aucun - + Active Draft command Commande active - + X coordinate of next point Coordonnée X du prochain point - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordonnée Y du prochain point - + Z coordinate of next point Coordonnée Z du prochain point - + Enter point Entrez le point - + Enter a new point with the given coordinates Entrez un nouveau point avec les coordonnées données - + Length Longueur - + Angle Angle - + Length of current segment Longueur du segment actuel - + Angle of current segment Angle du segment actuel - + Radius Rayon - + Radius of Circle Rayon du cercle - + If checked, command will not finish until you press the command button again Si cette case est cochée, la commande ne se terminera que si vous appuyez à nouveau sur son icône - + If checked, an OCC-style offset will be performed instead of the classic offset Si coché, un décalage de type OCC sera effectué au lieu du décalage classique - + &OCC-style offset Décalage de type &OCC - + Add points to the current object Ajouter des points à l'objet actuel - + Remove points from the current object Supprimer des points de l'objet actuel - + Make Bezier node sharp rendre les noeuds de Bezier angulaire - + Make Bezier node tangent Continuité en tangence - + Make Bezier node symmetric Tangence symétrique sur les sommet de courbes de bezier - + Sides Côtés - + Number of sides Nombre de côtés - + Offset Décalage - + XY (top) XY (haut) - - Select XY plane - Sélectionner le plan XY - - - + XZ (front) XZ (devant) - - Select XZ plane - Sélectionner le plan XZ - - - + YZ (side) YZ (côté) - - Select YZ plane - Sélectionner le plan YZ - - - + View Vue - - Select plane perpendicular to the current view - Sélectionner le plan perpendiculaire à l'axe de la vue actuelle - - - + Auto Plan de travail - - Do not project points to a drawing plane - Ne pas projeter les points sur un plan de dessin - - - + Text string to draw Chaîne de texte à dessiner - + String Chaîne - + Height of text Hauteur du texte - + Height Hauteur - + Intercharacter spacing Espacement entre les caractères - + Tracking Crénage - + Full path to font file: Chemin d'accès complet au fichier de police : - + Open a FileChooser for font file Ouvre une boîte de dialogue pour choisir le fichier de police - + Grid spacing Espacement de la grille - + The spacing between the grid lines L’espacement entre les lignes de la grille - + Main line every Ligne principale toutes les - + The number of lines between main lines Le nombre de lignes entre les lignes principales - + Center plane on view Centrer le plan dans la vue - - Select Plane - Sélectionner un plan de travail - - - + Line Ligne - + DWire Filaire - + Circle Cercle - + Center X Centre X - + Arc Arc - + Point Point - + Label Étiquette - + Distance Distance - + Trim Ajuster - + Pick Object Choisir un objet - + Edit Éditer - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Valeur de taille non valide. Utilisation de 200,0. - + Invalid Tracking value. Using 0. Valeur non valide de crénage. Utilisation de 0. - + Please enter a text string. Veuillez entrer une chaîne de texte. - + Select a Font file Sélectionnez un fichier de police - + Please enter a font file. Veuillez entrer un fichier de police s'il vous plaît - + Autogroup: Autogroup : - + Faces Faces - + Remove Enlever - + Add Ajouter - + Facebinder elements Surfaces liées: éléments - + Create Line Créer une ligne - - Pick next point: - - Indiquez le point suivant : - - - - + Convert to Wire Convertir en fil - + BSpline BSpline - + BezCurve Courbe de Bézier - + Create BezCurve Créer une courbe de Bézier - + Rectangle Rectangle - + Create Plane Créer un plan - + Create Rectangle Créer un rectangle - + Create Circle Créer un cercle - + Create Arc Créer un arc - + Start Angle Angle de départ - + Aperture Ouverture - + Polygon Polygone - + Create Polygon Créer un polygone - + Ellipse Ellipse - + Create Ellipse Créer une ellipse - + Text Texte - + Create Text Créer un texte - + Dimension Cote - + Create Dimension Créer une cote - + ShapeString Texte surfacique - + Create ShapeString Créer ShapeString - + Copy Copie - + Move Déplacer - + Change Style Changement de style - + Rotate Pivoter - - Cannot offset this object type - - Impossible de réaliser un décalage sur ce type d'objet - - - - + Stretch Étirer - + Upgrade Mettre à niveau - + Downgrade Rétrograder - + Selection is not a Knot La sélection n'est pas un noeud - + Convert to Sketch Convertir en Esquisse - + Convert to Draft Convertir en Ébauche - + Convert Convertir - + Array Réseau - + Create Point Créer un point - + Mirror Miroir - + &Draft &Draft @@ -3608,179 +3774,179 @@ To enabled FreeCAD to download these libraries, answer Yes. Les bibliothèques d'importation/exportation DXF nécessaires FreeCAD pour manipuler le format DXF ne se trouvaient pas sur ce système. Il vous faut soit activer FreeCAD télécharger ces bibliothèques : plan de travail de charge projet 1 - 2 - Menu Edition > Préférences > Import-Export > DXF > activer les téléchargements ou télécharger ces bibliothèques manuellement, comme expliqué sur https://github.com/yorikvanhavre/Draft-dxf-importer pour FreeCAD activé pour télécharger ces bibliothèques, répondre Oui. - + Draft.makeBSpline: not enough points Draft.makeBSpline : pas assez de points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline : Les derniers points sont égaux. Fermeture forcé - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline : Liste de points non valide - + No object given Aucun objet donné - + The two points are coincident Les deux points sont coïncidents - + Found groups: closing each open object inside Groupes trouvés: fermeture de chaque objet ouvert à l'intérieur - + Found mesh(es): turning into Part shapes Maillage(s) trouvés : transformer en formes - + Found 1 solidifiable object: solidifying it Trouvé 1 objet à solidifier : en train de le solidifier - + Found 2 objects: fusing them Trouvé 2 objets: les fusionner - + Found several objects: creating a shell Plusieurs objets trouvés : création d’une coquille - + Found several coplanar objects or faces: creating one face Plusieurs objets ou face coplanaires trouvés : faire une face - + Found 1 non-parametric objects: draftifying it Trouvé 1 objets non-paramétriques: le draftifiant - + Found 1 closed sketch object: creating a face from it 1 esquisse fermé trouvé : création d'une face avec - + Found 1 linear object: converting to line 1 objet linéaire trouvé : conversion en ligne - + Found closed wires: creating faces Filaires fermés trouvés : création de faces - + Found 1 open wire: closing it Trouvé 1 fil ouvert : fermer - + Found several open wires: joining them Plusieurs contour ouvert trouvés : les joindre - + Found several edges: wiring them Plusieurs arêtes ouvert trouvés : les joindre - + Found several non-treatable objects: creating compound Plusieurs objets non traitable trouvés : création d'un composé - + Unable to upgrade these objects. Impossible de mettre à jour ces objets. - + Found 1 block: exploding it 1 bloc trouvé : l'exploser - + Found 1 multi-solids compound: exploding it Trouvé 1 composé multi-solides : l'exploser - + Found 1 parametric object: breaking its dependencies Trouvé 1 objets paramétriques : briser ses dépendances - + Found 2 objects: subtracting them 2 objets trouvés : les soustraire - + Found several faces: splitting them Trouvé plusieurs visages : les séparer - + Found several objects: subtracting them from the first one Trouvé plusieurs objets : les soustraire du premier - + Found 1 face: extracting its wires Trouvé 1 face : extraction de ses fils - + Found only wires: extracting their edges Trouvé seulement fils : extraction de leurs arêtes - + No more downgrade possible Plus aucune rétrogradation possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry : fermé avec le même premier/dernier Point. Géométrie non mis à jour. - + No point found Aucun point de trouvé - + ShapeString: string has no wires ShapeString : la chaîne de caractères n'a pas de filaires - + Relative Relative - + Continue Continuer - + Close Fermer @@ -3825,7 +3991,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restreindre les Z - + Select edge Sélectionnez les arêtes @@ -3840,7 +4006,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Mode de longueur - + Wipe Effacer @@ -3852,516 +4018,639 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - Objet d'accrochage de cycle + Alterner entre différents accrochages - + Check this to lock the current angle Cochez cette case pour verrouiller l’angle actuel - + Coordinates relative to last point or absolute Coordonnées par rapport au dernier point ou absolue - + Filled Rempli - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Vérifiez que ce si l’objet doit apparaître comme remplie, sinon il il apparaîtra au format filaire - - - + Finish Terminer - + Finishes the current drawing or editing operation Termine le dessin courant ou opération d’édition - + &Undo (CTRL+Z) & Annuler (CTRL + Z) - + Undo the last segment Annuler le dernier segment - + Finishes and closes the current line Finitions et ferme la ligne courante - + Wipes the existing segments of this line and starts again from the last point Essuie les tronçons existants de cette ligne et reprend à partir du dernier point - + Set WP Définir le plan de travail - + Reorients the working plane on the last segment Réoriente le plan de travail sur le dernier segment - + Selects an existing edge to be measured by this dimension Sélectionne une arête existante qui sera mesurée par cette cote - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Si activé, les objets seront copiés au lieu de déplacés. Préférences-> esquisses-> mode de copie globale pour garder ce mode dans les prochaines commandes - - options - options - - - + Default Défaut - + Pick a face to define the drawing plane Choisissez une face pour définir le plan dessin - - First point: - Premier point : - - - - Closing - Fermeture - - - + Create Wire Créer une séquence de ligne - - Removing last point - Enlever le dernier point - - - - Next point: - Point suivant : - - - - Restarting from - Redémarrer à partir de - - - + Unable to create a Wire from selected objects Impossible de créer un fil(Wire) à partir des objets sélectionnés - + Spline has been closed La courbe B-Spline a été fermée - + Last point has been removed Dernier point a été supprimé - - Pick next point, or Finish (shift-F) or close (o): - Cliquer le point suivant, ou Terminer (Maj-F) ou fermer (o) : - - - + Create B-spline Créer une B-spline - + Bezier curve has been closed La courbe de Bézier a été fermée - - Pick first point: - Choisissez le premier point : - - - - Pick opposite point: - Choisissez le point opposé : - - - - Pick center point: - Sélectionner le point central : - - - - Pick radius: - Choisir le rayon : - - - - Pick start angle: - Choisissez l’angle de départ : - - - - Pick aperture: - Choisissez l'ouverture : - - - - Aperture angle: - Angle d'ouverture : - - - - Pick location point: - Choisir le point de l’emplacement : - - - + Edges don't intersect! Arêtes ne se croisent ! - + Pick ShapeString location point: Choisir le point de location de ShapeString : - + Select an object to move Sélectionnez un objet à déplacer - - Pick start point: - Sélectionner le point de départ : - - - - Pick end point: - Sélectionner le point de terminaison : - - - + Select an object to rotate Sélectionnez un objet à faire pivoter - - Pick rotation center: - Choisissez le centre de rotation : - - - - Pick base angle: - Choisissez l’angle de base : - - - - Pick rotation angle: - Choisissez l'angle de rotation : - - - + Select an object to offset Sélectionnez un objet pour compenser - + Offset only works on one object at a time Décalage ne fonctionne que sur un seul objet à la fois - + Sorry, offset of Bezier curves is currently still not supported Désolé, le décalage des courbes de Bézier n'est toujours pas pris en charge - - Pick distance: - Choisissez la distance : - - - + Select an object to stretch Sélectionner un objet à étirer - - Pick first point of selection rectangle: - Cliquer le premier point du rectangle de sélection : - - - - Pick opposite point of selection rectangle: - Cliquer le point opposé du rectangle de sélection : - - - - Pick start point of displacement: - Cliquer le point de départ du déplacement : - - - - Pick end point of displacement: - Cliquer le point de fin du déplacement : - - - + Turning one Rectangle into a Wire Transforme un Rectangle en un Filaire - + Select an object to join Sélectionnez un objet à joindre - + Join Joindre - + Select an object to split Sélectionnez un objet à scinder - + Select an object to upgrade Sélectionnez un objet à mettre à niveau - + Select object(s) to trim/extend Sélectionnez le ou les objets à réduire/prolonger - + Unable to trim these objects, only Draft wires and arcs are supported Impossible de couper ces objets, seuls les objets Esquisse filaires et arcs sont supportés - + Unable to trim these objects, too many wires Impossible de couper ces objets, trop de filaires - + These objects don't intersect Ces objets ne se croisent pas - + Too many intersection points Trop de points d'intersection - + Select an object to scale Sélectionnez un objet à l'échelle - - Pick base point: - Choisissez le point de base : - - - - Pick reference distance from base point: - Choisissez la distance de référence à partir du point de base : - - - - Pick new distance from base point: - Choisissez nouvelle distance de point de base : - - - + Select an object to project Sélectionnez un objet à projeter - - This object type is not editable - Ce type d'objet n'est pas modifiable - - - + Please select only one object Veuillez sélectionner un seul objet - + Select a Draft object to edit Sélectionnez un objet Esquisse à modifier - + Active object must have more than two points/nodes L'objet actif doit avoir plus de deux points/nœuds - + Endpoint of BezCurve can't be smoothed Point de terminaison de BezCurve ne peut pas être lissé - + Select an object to convert Sélectionnez un objet à convertir - + Select an object to array Sélectionnez un objet en tableau - + Please select base and path objects Svp sélectionnez un objet de base et une trajectoire - + Please select base and pointlist objects Veuillez sélectionner des objets de base et de liste de points - + Select an object to clone Sélectionnez un objet à cloner - + Select face(s) on existing object(s) Sélectionnez la ou les face(s) sur des objets existants - + Select an object to mirror Sélectionner un objet à symétriser - - Pick start point of mirror line: - Sélectionner le point de départ de la ligne de symétrie: - - - - Pick end point of mirror line: - Choisir le point de terminaison de la ligne de symétrie: - - - + This tool only works with Wires and Lines Cet outil ne fonctionne qu’avec des fils et des lignes - - - Pick target point: - Choisir le point cible : - - - - Pick endpoint of leader line: - Choisir le point de terminaison de la ligne de repère : - - - - Pick text position: - Choisir la position du texte : - ODA (formerly Teigha) File Converter not found, DWG support is disabled Convertisseur de fichier ODA (anciennement Teigha) introuvable, le support DWG est désactivé - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s partage une base avec %d autres objets. Veuillez vous assurer que vous voulez modifier ceci. Subelement mode - Subelement mode + Mode sous-élément - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Basculer entre la modification du rayon et des angles d’arc - + Modify subelements - Modify subelements + Modifier les sous-éléments - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Si coché, les sous-éléments seront modifiés plutôt que les objets en entier - + CubicBezCurve - CubicBezCurve + Courbe de Bezier cubique - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Certains sous-élément n’ont pas pu être déplacés. - + Scale Échelle - + Some subelements could not be scaled. - Some subelements could not be scaled. + Certains sous-éléments n’ont pas pu être redimensionnés. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + L'esquisse de base du mur est trop complexe pour être modifier : il est suggéré d'éditer directement l'esquisse + + + + Top + Dessus + + + + Front + Face + + + + Side + Côté + + + + Current working plane + Plan de travail actuel + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatique + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Sélectionner un objet à modifier + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Tirant d'eau + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitaires + + + + Wire tools + Outils de filaires + + + + Snapping + Accrochage diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index 705c63a2e4..d4f836857b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index f09d26f4cf..4b9a61531a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Define un patrón de raiado - + Sets the size of the pattern Estabelece o tamaño do patrón - + Startpoint of dimension Punto inicial do acoutamento - + Endpoint of dimension Punto final do acoutamento - + Point through which the dimension line passes Punto por onde pasa a liña de acoutamento - + The object measured by this dimension O obxecto medido por este acoutamento - + The geometry this dimension is linked to A xeometría á que está ligado este acoutamento - + The measurement of this dimension A medida deste acoutamento - + For arc/circle measurements, false = radius, true = diameter Para as medidas de arco ou círculo, false = raio, true = diámetro - + Font size Tamaño da fonte - + The number of decimals to show A cantidade de decimais a amosar - + Arrow size Tamaño das frechas - + The spacing between the text and the dimension line A separación entre o texto mais a liña de acoutamento - + Arrow type Tipo de frechas - + Font name Nome da fonte - + Line width Largura da liña - + Line color Cor de liña - + Length of the extension lines Lonxitude das liñas auxiliares - + Rotate the dimension arrows 180 degrees Xirar as frechas de acoutamento 180 graos - + Rotate the dimension text 180 degrees Xirar o texto de acoutamento 180 graos - + Show the unit suffix Amosar o sufixo de unidade - + The position of the text. Leave (0,0,0) for automatic position A situación do texto. Deixar (0,0,0) para posición automática - + Text override. Use $dim to insert the dimension length Substitución de texto. Use $dim para inserir a lonxitude de acoutamento - + A unit to express the measurement. Leave blank for system default Unha unidade para expresar a medida. Deixar en branco para usar a do sistema por defecto - + Start angle of the dimension Ángulo de principio do acoutamento - + End angle of the dimension Ángulo do final do acoutamento - + The center point of this dimension O centro deste acoutamento - + The normal direction of this dimension A dirección normal deste acoutamento - + Text override. Use 'dim' to insert the dimension length Substitución de texto. Use 'dim' para inserir a lonxitude de acoutamento - + Length of the rectangle Lonxitude do rectángulo - + Radius to use to fillet the corners Raio a usar para o chafrán arredondado dos recunchos - + Size of the chamfer to give to the corners Tamaño do chafrán para dar ós cantos - + Create a face Crear unha face - + Defines a texture image (overrides hatch patterns) Define unha imaxe como textura (substitúe ós patróns de raiado) - + Start angle of the arc Ángulo de principio do arco - + End angle of the arc (for a full circle, give it same value as First Angle) Ángulo do final do arco (para un círculo completo, darlle o mesmo valor ca o Ángulo de principio) - + Radius of the circle Raio do círculo - + The minor radius of the ellipse O semieixo menor da elipse - + The major radius of the ellipse O semieixo maior da elipse - + The vertices of the wire Os vértices do arame - + If the wire is closed or not Se o arame está pechado ou non - + The start point of this line O punto de principio desta liña - + The end point of this line O punto final desta liña - + The length of this line A lonxitude desta liña - + Create a face if this object is closed Crear unha cara se este obxecto está pechado - + The number of subdivisions of each edge A cantidade de subdivisións de cada bordo - + Number of faces Número de faces - + Radius of the control circle Raio do círculo de control - + How the polygon must be drawn from the control circle Como debe ser trazado o polígono respecto do círculo de control - + Projection direction Dirección de proxección - + The width of the lines inside this object A largura das liñas dentro deste obxecto - + The size of the texts inside this object O tamaño dos textos dentro deste obxecto - + The spacing between lines of text O espazado entre liñas de texto - + The color of the projected objects A cor dos obxectos proxectados - + The linked object O obxecto ligado - + Shape Fill Style Estilo de enchedura da forma - + Line Style Estilo de liña - + If checked, source objects are displayed regardless of being visible in the 3D model Se é marcada, os obxectos de orixe amósanse independentemente de seren visibles no modelo 3D - + Create a face if this spline is closed Crear unha face se este spline é pechado - + Parameterization factor Factor paramétrico - + The points of the Bezier curve Os puntos da curva de Bézier - + The degree of the Bezier function O grao da función de Bézier - + Continuity Continuidade - + If the Bezier curve should be closed or not Se a curva de Bézier debe ser pechada ou non - + Create a face if this curve is closed Crear unha face, se esta curva está pechada - + The components of this block Os compoñentes deste bloque - + The base object this 2D view must represent O obxecto base que esta visión 2D debe representar - + The projection vector of this object A proxección vectorial deste obxecto - + The way the viewed object must be projected O xeito no que a vista do obxecto debe ser proxectada - + The indices of the faces to be projected in Individual Faces mode Os índices das faces a seren proxectadas no xeito de Faces Individuais - + Show hidden lines Amosar liñas ocultas - + The base object that must be duplicated O obxecto de base que debe ser duplicado - + The type of array to create O tipo de matriz para crear - + The axis direction A dirección do eixo - + Number of copies in X direction Cantidade de copias en dirección X - + Number of copies in Y direction Cantidade de copias en dirección Y - + Number of copies in Z direction Cantidade de copias en dirección Z - + Number of copies Cantidade de copias - + Distance and orientation of intervals in X direction Distancia e orientación dos intervalos na dirección X - + Distance and orientation of intervals in Y direction Distancia e orientación dos intervalos na dirección Y - + Distance and orientation of intervals in Z direction Distancia e orientación dos intervalos na dirección Z - + Distance and orientation of intervals in Axis direction Distancia e orientación dos intervalos na dirección do eixo - + Center point Centro - + Angle to cover with copies Ángulo que cobren as copias - + Specifies if copies must be fused (slower) Especifica se se deben fundiren as copias (máis lento) - + The path object along which to distribute objects O obxecto de camiño ao longo do cal se han distribuír os obxectos - + Selected subobjects (edges) of PathObj Subobxectos escolmados (bordos) de PathObj - + Optional translation vector Vector opcional de translación - + Orientation of Base along path Orientación da Base o longo do camiño - + X Location Posición X - + Y Location Posición Y - + Z Location Posición Z - + Text string Cadea de texto - + Font file name Nome do ficheiro de fontes - + Height of text Altura do texto - + Inter-character spacing Espazado entre caracteres - + Linked faces Faces ligadas - + Specifies if splitter lines must be removed Especifica se as liñas de división deben de ser rexeitadas - + An optional extrusion value to be applied to all faces Un valor de extrusión opcional para ser aplicado a tódalas faces - + Height of the rectangle Altura do rectángulo - + Horizontal subdivisions of this rectangle Subdivisións horizontais deste rectángulo - + Vertical subdivisions of this rectangle Subdivisións verticais deste rectángulo - + The placement of this object A situación deste obxecto - + The display length of this section plane A lonxitude visualizada deste plano de corte - + The size of the arrows of this section plane O tamaño das frechas deste plano de corte - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Para modos Cutlines e Cutfaces, isto deixa as caras no lugar de corte - + The base object is the wire, it's formed from 2 objects Obxecto base é o arame que está formado a partir de 2 obxectos - + The tool object is the wire, it's formed from 2 objects Obxecto ferramenta é o arame que está formado a partir de 2 obxectos - + The length of the straight segment Lonxitude do segmento recto - + The point indicated by this label Punto indicado por esta etiqueta - + The points defining the label polyline Puntos definidos pola etiqueta poliliña - + The direction of the straight segment Dirección do segmento recto - + The type of information shown by this label Tipo de información amosada na etiqueta - + The target object of this label Obxecto de destino desta etiqueta - + The text to display when type is set to custom Texto amosado cando o tipo está definido para personalizar - + The text displayed by this label Texto amosado nesta etiqueta - + The size of the text Tamaño do texto - + The font of the text Fonte do texto - + The size of the arrow Tamaño da frecha - + The vertical alignment of the text Aliñamento vertical do texto - + The type of arrow of this label Tipo de frecha desta etiqueta - + The type of frame around the text of this object Tipo de marco que arrodea o texto deste obxecto - + Text color Cor do texto - + The maximum number of characters on each line of the text box Máximo número de caracteres en cada liña da caixa de texto - + The distance the dimension line is extended past the extension lines A distancia por defecto á que se estende a liña de acoutamento máis alá das liñas auxiliares - + Length of the extension line above the dimension line Sobrante da liña auxiliar a partir da de acoutamento - + The points of the B-spline Puntos da BSpline - + If the B-spline is closed or not Se a BSpline é pechada ou non - + Tessellate Ellipses and B-splines into line segments Teselado de Elipses e B-splines en segmentos de liña - + Length of line segments if tessellating Ellipses or B-splines into line segments Lonxitude de segmentos de liña se se teselan elipses ou BSplines en segmentos de liña - + If this is True, this object will be recomputed only if it is visible Se é Certo, este obxecto pode ser recalculado só se está visible - + Base Base - + PointList Lista de Puntos - + Count Conta - + The objects included in this clone Os obxectos incluídos neste clon - + The scale factor of this clone Factor de escala deste clon - + If this clones several objects, this specifies if the result is a fusion or a compound Se este clon e de varios obxectos, especifica se o resultado é unha fusión ou un composto - + This specifies if the shapes sew Isto especifica se as formas se cosen - + Display a leader line or not Amosar unha liña guía ou non - + The text displayed by this object O texto amosado por este obxecto - + Line spacing (relative to font size) Espazado entre liñas (en relación co tamaño da fonte) - + The area of this object - The area of this object + A área deste obxecto - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Amosa o símbolo de Acoutamento no fin do arame - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusionar parede e obxectos estruturais de similar tipo e material + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Pendente - + Scale Escala - + Writing camera position Escribir posición da cámara - + Writing objects shown/hidden state Escribir estado de obxectos amosar/agochar - + X factor Factor X - + Y factor Factor Y - + Z factor Factor Z - + Uniform scaling Escalado uniforme - + Working plane orientation Orientación do plano de traballo @@ -781,20 +816,25 @@ Por favor instalar manualmente o complemento das librarías dxf dende menú de Ferramentas -> Xestión de complementos - + This Wire is already flat O Arame xa está plano - + Pick from/to points Escolma puntos dende/a - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Pendente para dar aos Arames/Liñas escolmados: 0 = horizontal, 1 = 45 graos cara arriba, -1 = 45 graos cara abaixo + + + Create a clone + Crear un clon + DraftShapeStringGui @@ -846,28 +886,28 @@ dende menú de Ferramentas -> Xestión de complementos Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Inserir coordenadas ou escolmar punto co rato. Reset 3d point selection - Reset 3d point selection + Redefinir escolma 3d puntos Reset Point - Reset Point + Reiniciar Punto Draft_AddConstruction - + Add to Construction group Engadir ó grupo de Construción - + Adds the selected objects to the Construction group Engade os obxectos escolmados ao grupo de construción @@ -875,12 +915,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_AddPoint - + Add Point Engadir punto - + Adds a point to an existing Wire or B-spline Engade un punto a un arame ou BSpline existente @@ -888,12 +928,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_AddToGroup - + Move to group... Mover ó grupo... - + Moves the selected object(s) to an existing group Move o(s) obxecto(s) escolmado(s) para un grupo existente @@ -901,12 +941,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_ApplyStyle - + Apply Current Style Aplicar Estilo Actual - + Applies current line width and color to selected objects Aplica a largura de liña e cor actuais ós obxectos escolmados @@ -914,46 +954,46 @@ dende menú de Ferramentas -> Xestión de complementos Draft_Arc - + Arc Arco - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Crea un arco por punto central e radio. CTRL para forzar, SHIFT para constrinxir Draft_ArcTools - + Arc tools - Arc tools + Ferramentas de Arco Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arco por 3 puntos - + Creates an arc by 3 points - Creates an arc by 3 points + Crea un arco por 3 puntos Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object Fai unha matriz rectangular ou polar dun obxecto escolmado @@ -961,12 +1001,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_AutoGroup - + AutoGroup Auto-agrupar - + Select a group to automatically add all Draft & Arch objects to Escolmar un grupo ó que engadir automaticamente tódolos obxectos Bosquexo e Arquitectura @@ -974,12 +1014,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_BSpline - + B-spline Bspline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Crea unha Bspline de múltiples puntos. Crtl para forzar, Maius. para constrinxir @@ -987,12 +1027,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_BezCurve - + BezCurve Curva Bezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Fai unha curva Bezier. CTRL para forzar, SHIFT para restrinxir @@ -1000,20 +1040,20 @@ dende menú de Ferramentas -> Xestión de complementos Draft_BezierTools - + Bezier tools - Bezier tools + Ferramentas Bezier Draft_Circle - + Circle Círculo - + Creates a circle. CTRL to snap, ALT to select tangent objects Fai un círculo. CTRL para forzar, ALT para escolmar obxectos tanxentes @@ -1021,12 +1061,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_Clone - + Clone Clonar - + Clones the selected object(s) Clona o(s) obxecto(s) escolmado(s) @@ -1034,12 +1074,12 @@ dende menú de Ferramentas -> Xestión de complementos Draft_CloseLine - + Close Line Pechar liña - + Closes the line being drawn Pecha a liña que se está a debuxar @@ -1047,27 +1087,27 @@ dende menú de Ferramentas -> Xestión de complementos Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + Curva Cúbica Bezier - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Crea unha curva Cúbica Bezier +Pinchar e arrastrar para definir puntos de control. CTRL para forzar, SHIFT para constrinxir Draft_DelPoint - + Remove Point Desbotar punto - + Removes a point from an existing Wire or B-spline Desbota un punto dun arame ou Bspline existente @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Acoutamento - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Fai un acoutamento. CTRL para forzar, SHIFT para constrinxir, ALT para escolmar un segmento @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Degradar - + Explodes the selected objects into simpler objects, or subtracts faces Estoupa os obxectos escolmados en obxectos máis simples, ou detrae caras @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Bosquexo para Esbozo - + Convert bidirectionally between Draft and Sketch objects Converter de xeito bidireccional entre obxectos de Bosquexo e de Esbozo @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Debuxo - + Puts the selected objects on a Drawing sheet Pon os obxectos escolmados nunha folla de Debuxo @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Editar - + Edits the active object Edita o obxecto activado @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Edición mellorada - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Editar os obxectos escolmados Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Fai unha elipse. CTRL para forzar @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Xuntacaras - + Creates a facebinder object from selected face(s) Fai un obxecto Xuntacaras a partir de caras escolmadas @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Rematar liña - + Finishes a line without closing it Remata unha liña sen pechala @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inverter acoutamento - + Flip the normal direction of a dimension Inverter a dirección de escritura dun acoutamento @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Arranxar - + Heal faulty Draft objects saved from an earlier FreeCAD version Arranxa obxectos defectuosos de Bosquexo (Draft), gardados por unha versión anterior do FreeCAD @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Xuntar - + Joins two wires together Xuntar dous arames unidos @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Etiqueta - + Creates a label, optionally attached to a selected object or element Crea unha etiqueta, opcionalmente ligada á obxectos escolmados ou elemento + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Liña - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Fai unha liña entre 2 puntos. CTRL para forzar, SHIFT para constrinxir @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Simetría - + Mirrors the selected objects along a line defined by two points Reflicte os obxectos escolmados ao longo dunha liña definida por dos puntos @@ -1275,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Mover os obxectos escolmados entre 2 puntos. CTRL para forzar, SHIFT para constrinxir Draft_Offset - + Offset Separación - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Fai un desprazamento do obxecto activo. CTRL para forzar, SHIFT para restrinxir, ALT para copiar @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Copia múltiple por camiño - + Creates copies of a selected object along a selected path. Fai copias dun obxecto preseleccionado ó longo dun camiño marcado. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punto - + Creates a point object Fai un obxecto punto @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Matriz de Puntos - + Creates copies of a selected object on the position of points. Crea copias de obxectos escolmados sobre a posición dos puntos. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Fai un polígono regular. CTRL para forzar, SHIFT para restrinxir @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rectángulo - + Creates a 2-point rectangle. CTRL to snap Fai un rectángulo dado por 2 puntos. CTRL para forzar @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Xirar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Xira os obxectos escolmados. CTRL para forzar, SHIFT para restrinxir, ALT para copiar @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Escala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Escala os obxectos escolmados partindo dun punto base. CTRL para forzar, SHIFT para restrinxir, ALT para copiar @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Escolmar grupo - + Selects all objects with the same parents as this group Escolma tódolos obxectos cos mesmos pais que este grupo @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Escolmar plano - + Select a working plane for geometry creation Escolma un plano de traballo para facer obxectos 2D @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Crea un obxecto proxy a partir do plano de traballo actual - + Create Working Plane Proxy Crear proxy do plano de traballo @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Visualización 2D dunha forma - + Creates Shape 2D views of selected objects Xera vistas 2D dos obxectos escolmados @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma dende texto... - + Creates text string in shapes. Fai cadeas de texto con formas. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Amosar ferramentas de forzar - + Shows Draft snap toolbar Amosar ferramentas de forzar do Bosquexo @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Estabelecer pendente - + Sets the slope of a selected Line or Wire Axusta a pendente dunha liña ou arame escolmado @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Ángulos - + Snaps to 45 and 90 degrees points on arcs and circles Forza puntos a 45 e 90 graos en arcos e círculos @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Forza ó centro de círculos e arcos @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensións - + Shows temporary dimensions when snapping to Arch objects Amosa as dimensións provisorias cando se forza para obxectos de Arquitectura @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punto final - + Snaps to endpoints of edges Forza a puntos finais de arestas @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensión - + Snaps to extension of edges Forza como extensión de arestas @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grella - + Snaps to grid points Forza a puntos da grella @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersección - + Snaps to edges intersections Forza ás interseccións de arestas @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Alternar Prender/Apagar - + Activates/deactivates all snap tools at once Activa/desactiva tódalas ferramentas de forzar a un tempo - + Lock Bloquear @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punto medio - + Snaps to midpoints of edges Forza ós puntos medios das arestas @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Próximo - + Snaps to nearest point on edges Forzar ó punto próximo nas arestas @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortogonal - + Snaps to orthogonal and 45 degrees directions Forza a direccións ortogonais e mais a 45 graos @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralela - + Snaps to parallel directions of edges Forza a direccións paralelas ás arestas @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Forza perpendicularmente ás arestas @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Especial - + Snaps to special locations of objects Forza a localizacións especiais dos obxectos @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plano de traballo - + Restricts the snapped point to the current working plane Restrinxe o forzado ó plano de traballo actual @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Dividir - + Splits a wire into two wires Divide o arame en dous arames @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Alongar - + Stretches the selected objects Estalica os obxectos escolmados @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Fai un apuntamento. CTRL para forzar @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Alterna ó modo de construción para os obxectos seguintes. - + Toggle Construction Mode Alternar a modo de construción @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Alternar a modo continuo - + Toggles the Continue Mode for next commands. Alterna ó modo continuo para os comandos seguintes. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Alternar o xeito de visualización - + Swaps display mode of selected objects between wireframe and flatlines Muda o xeito de visualización dos obxectos escolmados entre modelo de arame e caras planas @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Grella - + Toggles the Draft grid on/off Activar/desactivar grella - + Grid Grella - + Toggles the Draft grid On/Off Activa/desactiva a grella de bosquexo @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Talles - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Talla ou estende os obxectos escolmados, ou extrúe caras simples. CTRL forza, SHIFT restrinxe ó segmento actual ou á normal, ALT inverte @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Desbotar o último segmento - + Undoes the last drawn segment of the line being drawn Desbota o último segmento da liña actual @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Promover - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Xunta obxectos escolmados nun, ou converte arames pechados a caras cheas, ou liga caras - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Engade un VisGroup - - Draft_Wire - - DWire - Aramado + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Fai un aramado con moitos puntos (DWire). CTRL para forzar, SHIFT para restrinxir + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Arame para BSpline - + Converts between Wire and B-spline Converte entre Arame e BSpline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Configuración xeral de Bosquexo - + This is the default color for objects being drawn while in construction mode. Esta é a cor por defecto para obxectos namentres son deseñados no modo de construción. - + This is the default group name for construction geometry Este é o nome por defecto do grupo para xeometría de construción - + Construction Construción @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainGardar a cor e mais a largura de Liña actual para tódalas sesións - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Se isto está marcado, o modo de copia manterase a través dos comandos, pola contra, os comandos sempre principiarán sen o modo copia - + Global copy mode Modo de copia global - + Default working plane Plano de traballo por defecto - + None Ningún - + XY (Top) XY (Planta) - + XZ (Front) XZ (Alzado) - + YZ (Side) YZ (Perfil) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Configuración xeral - + Construction group name Nome do grupo de construción - + Tolerance Tolerancia @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Aquí pode especificar un directorio que conteña ficheiros SVG con definicións <patrón> que poden ser engadidos os patróns estándar de raiado - + Draft interface mode Interface en modo Bosquexo - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Este é o modo de UI (interface de usuario) na que o módulo Bosquexo vai traballar: O modo Barra de Ferramentas sitúa tódalas configuracións de Bosquexo (Draft) nunha barra de ferramentas separada, namentres que o modo Barra de Tarefas usa o sistema de Visualización de Tarefa do FreeCAD para tódalas interaccións co usuario - + Toolbar Barra de Ferramentas - + Taskview Visualización de Tarefa @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Modo Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalmente, despois de copiar obxectos, as copias quedan escolmadas. Se esta opción está activada, hanse escolmar os obxectos orixinais no canto das copias. - + Select base objects after copying Escolmar os obxectos base despois de copiar @@ -2100,7 +2135,7 @@ such as "Arial:Bold" As liñas mestras hanse amosar máis grosas. Especifique aquí cantos cadrados ha haber entre as liñas mestras. - + Internal precision level Nivel de precisión interna @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Transformar liñas de cor branca en negra - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Se isto está marcado, as ferramentas de debuxo farán primitivas Peza no canto de obxectos Bosquexo, sempre e cando sexa posible. - + Use Part Primitives when available Usar primitivas Peza cando sexa posible @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Forzar sempre (desactiva o modo Forzar) - - Construction geometry - Xeometría de construción - - - + Construction geometry color Cor da xeometría de construción @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Escolme un ficheiro de fontes - + Fill objects with faces whenever possible Encher os obxectos con caras sempre que sexa posible @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Actualización automática (só para o importador antigo) - + Prefix labels of Clones with: Etiquetas prefixo de clons con: @@ -2712,7 +2742,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Este é o método escollido para importar as cores dos obxectos SVG en FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Se isto está marcado, os obxectos aparecerán enchidos por defecto. Pola contra, aparecerán como tramas de arame @@ -2792,17 +2822,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Se isto está marcado, os obxectos da mesma capa hanse xuntar en Draft Blocks, tornando a visualización máis rápida, pero serán menos sinxelos de editar - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Se está verificada, vai amosar instrucións paso a paso na fiestra de saída cando corran os comandos de bosquexo - - - - Verbose command line mode - Modo de liña de comando polo miudo - - - + When drawing lines, set focus on Length instead of X coordinate Cando deseña liñas, axusta o foco sobre a lonxitude cumprida da coordenada X @@ -2882,711 +2902,857 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Cantidade máxima de segmentos Spline: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Número de decimais en operacións internas de coordenadas (por ex. 3=0,001). Valores entre 6 e 8 son habitualmente considerados o mellor acordo entre os usuarios de FreeCAD. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Este valor usado por funcións usan unha tolerancia. +Valores con diferentes entre este valor poden tratarse como iguais. Este valor quedará obsoleto cedo co nivel de precisión por riba de ambos controis. Use legacy python exporter - Use legacy python exporter + Usar antigo exportador python + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Xeometría de construción + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativa + + + + R + R + + + + Continue + Continúa + + + + T + T + + + + Close + Pechar + + + + O + O + + + + Copy + Copiar + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Raiado + + + + L + L + + + + Exit + Sair + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Lonxitude + + + + H + H + + + + Wipe + Limpeza + + + + W + W + + + + Set WP + Conxunto WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrinxir X + + + + X + X + + + + Restrict Y + Restrinxir Y + + + + Y + Y + + + + Restrict Z + Restrinxir Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Forzar de Bosquexo - - - Draft creation tools - Ferramentas de creación de Bosquexo - - - - Draft modification tools - Ferramentas de modificación de Bosquexo - - - - Utilities - Utilidades - - - - Wire tools - Ferramentas de arame - - - - Snapping - Forzado - draft - + not shape found non se atopou ningunha forma - + All Shapes must be co-planar Tódalas formas deben de ser co-planares - + The given object is not planar and cannot be converted into a sketch. O obxecto collido non é planar e non se pode converter nun esbozo. - + Unable to guess the normal direction of this object Non é posible adiviñar a dirección normal deste obxecto - + Draft Command Bar Liña de comandos de Bosquexo - + Toggle construction mode Alternar a modo de construción - + Current line color Cor da liña actual - + Current face color Cor de face actual - + Current line width Largura de liña actual - + Current font size Tamaño de fonte actual - + Apply to selected objects Aplicar os obxectos escolmados - + Autogroup off Auto-agrupar desactivado - + active command: comando activo: - + None Ningún - + Active Draft command Comando activo - + X coordinate of next point Coordenada X do seguinte punto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y do seguinte punto - + Z coordinate of next point Coordenada Z do seguinte punto - + Enter point Inserir punto - + Enter a new point with the given coordinates Inserir un novo punto coas coordenadas dadas - + Length Lonxitude - + Angle Ángulo - + Length of current segment Lonxitude do segmento actual - + Angle of current segment Ángulo do segmento actual - + Radius Raio - + Radius of Circle Raio do círculo - + If checked, command will not finish until you press the command button again Se isto está marcado, non ha rematar o comando hasta que volva premer o botón do comando de novo - + If checked, an OCC-style offset will be performed instead of the classic offset Se isto está marcado, hase facer un desprazamento de tipo OCC, no canto dun desprazamento clásico - + &OCC-style offset Desprazamento de tipo &OCC - + Add points to the current object Engade puntos o obxecto actual - + Remove points from the current object Desbota puntos do obxecto actual - + Make Bezier node sharp Facer nós Bezier agudos - + Make Bezier node tangent Facer nós Bezier tanxentes - + Make Bezier node symmetric Facer nós Bezier simétricos - + Sides Lados - + Number of sides Número de lados - + Offset Separación - + XY (top) XY (planta) - - Select XY plane - Escolmar o plano XY - - - + XZ (front) XZ (alzado) - - Select XZ plane - Escolmar o plano XZ - - - + YZ (side) YZ (perfil) - - Select YZ plane - Selecionar o Plano YZ - - - + View Vista - - Select plane perpendicular to the current view - Escolmar o plano perpendicular a vista actual - - - + Auto Automático - - Do not project points to a drawing plane - Non proxectar os puntos no plano de deseño - - - + Text string to draw Cadea de texto para debuxar - + String Cadea de texto - + Height of text Altura do texto - + Height Altura - + Intercharacter spacing Espazado entre caracteres - + Tracking Seguimento - + Full path to font file: Ruta completa ao ficheiro fonte: - + Open a FileChooser for font file Abrir unha xanela de diálogo para escolmar o ficheiro fonte - + Grid spacing Espazado da grella - + The spacing between the grid lines O espazado entre as liñas da grella - + Main line every Liñas mestras a cada - + The number of lines between main lines O número de liñas entre as liñas mestras - + Center plane on view Centrar plano na vista - - Select Plane - Escolmar plano - - - + Line Liña - + DWire Aramado - + Circle Círculo - + Center X Centro X - + Arc Arco - + Point Punto - + Label Etiqueta - + Distance Distance - + Trim Tallar - + Pick Object Escolmar obxecto - + Edit Editar - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Valor de tamaño non válido. Usando 200.0. - + Invalid Tracking value. Using 0. Valor de seguimento non válido. Usando 0. - + Please enter a text string. Por favor, insira un texto. - + Select a Font file Escolme un ficheiro de fontes - + Please enter a font file. Por favor, insira un ficheiro de fonte. - + Autogroup: Auto-agrupar: - + Faces Faces - + Remove Rexeitar - + Add Engadir - + Facebinder elements Elementos de Xuntacaras - + Create Line Facer liña - - Pick next point: - - Escolme o seguinte punto: - - - - + Convert to Wire Converter en Arame - + BSpline BSpline - + BezCurve Curva Bezier - + Create BezCurve Facer curva Bezier - + Rectangle Rectángulo - + Create Plane Facer plano - + Create Rectangle Facer rectángulo - + Create Circle Facer círculo - + Create Arc Facer Arco - + Start Angle Ángulo de principio - + Aperture Abertura - + Polygon Polígono - + Create Polygon Facer Polígono - + Ellipse Elipse - + Create Ellipse Facer Elipse - + Text Texto - + Create Text Facer un texto - + Dimension Acoutamento - + Create Dimension Facer un Acoutamento - + ShapeString TextoForma - + Create ShapeString Facer un TextoForma - + Copy Copiar - + Move Mover - + Change Style Cambiar estilo - + Rotate Xirar - - Cannot offset this object type - - Non se pode facer un desprazamento con este tipo de obxecto - - - - + Stretch Alongar - + Upgrade Promover - + Downgrade Degradar - + Selection is not a Knot A selección non é un nó - + Convert to Sketch Converter a Esbozo - + Convert to Draft Converter a Bosquexo - + Convert Converter - + Array Matriz - + Create Point Facer Punto - + Mirror Simetría - + &Draft &Bosquexo @@ -3608,179 +3774,179 @@ Ou baixe estas bibliotecas manualmente, conforme se explica en https://github.co Para permitir o FreeCAD a descarga destas bibliotecas, responda Si. - + Draft.makeBSpline: not enough points Draft.makeBSpline: Non hai puntos abondo - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Cabos iguais Pechado forzado - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Lista de puntos non válida - + No object given Ningún obxecto dado - + The two points are coincident Os dous puntos son coincidentes - + Found groups: closing each open object inside Grupos atopados: cerrando cada obxecto aberto no seu interior - + Found mesh(es): turning into Part shapes Malla(s) atopada(s): converter forma(s) en Peza(s) - + Found 1 solidifiable object: solidifying it Atopado 1 obxecto solidificable: solidificándoo - + Found 2 objects: fusing them Atopados 2 obxectos: fusionando - + Found several objects: creating a shell Atopados varios obxectos: creando unha carcasa - + Found several coplanar objects or faces: creating one face Atopáronse varias faces ou obxectos coplanares: facendo unha face - + Found 1 non-parametric objects: draftifying it Atopado 1 obxecto non paramétrico: parametrizándoo - + Found 1 closed sketch object: creating a face from it Atopado un obxecto pechado de esbozo: facendo unha cara con el - + Found 1 linear object: converting to line Atopado un obxecto linear: converténdoo a liña - + Found closed wires: creating faces Atopados arames pechados: facendo faces - + Found 1 open wire: closing it Atopado 1 arame aberto: pechándoo - + Found several open wires: joining them Atopados varios arames abertos: pechándoos - + Found several edges: wiring them Atopados varios bordos: facendo un arame deles - + Found several non-treatable objects: creating compound Atopados varios obxectos non tratables: facendo un composto - + Unable to upgrade these objects. Non é posible promover estes obxectos. - + Found 1 block: exploding it Atopado 1 bloque: estoupándoo - + Found 1 multi-solids compound: exploding it Atopado 1 composto multi-sólidos: extoupándoo - + Found 1 parametric object: breaking its dependencies Atopado 1 obxecto paramétrico: rompendo as dependencias - + Found 2 objects: subtracting them Atopados 2 obxectos: substraéndoos - + Found several faces: splitting them Atopadas varias faces: dividíndoas - + Found several objects: subtracting them from the first one Atopados varios obxectos: substraéndoos dende o primeiro deles - + Found 1 face: extracting its wires Atopado 1 face: extraendo os arames - + Found only wires: extracting their edges Atopados só arames: extraendo os seus bordos - + No more downgrade possible Non é posible degradar máis - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: pechada co mesmo primeiro/derradeiro Punto. Xeometría non promovida. - + No point found Punto non atopado - + ShapeString: string has no wires ShapeString: o texto non contén arames - + Relative Relativa - + Continue Continúa - + Close Pechar @@ -3825,7 +3991,7 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Restrinxir Z - + Select edge Escolma bordo @@ -3840,7 +4006,7 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Modo lonxitude - + Wipe Limpeza @@ -3855,513 +4021,636 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Obxecto de forzado de ciclo - + Check this to lock the current angle Comproba isto para bloquear o ángulo actual - + Coordinates relative to last point or absolute Coordenadas relativas ao último punto ou absolutas - + Filled Raiado - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Comproba se o obxecto debe aparecer como raiado, do contrario aparecerá como trama de arames - - - + Finish Rematar - + Finishes the current drawing or editing operation Remata a operación de debuxo ou edición actual - + &Undo (CTRL+Z) &Desfacer (CTRL+Z) - + Undo the last segment Desfacer o segmento anterior - + Finishes and closes the current line Rematar e pechar a liña actual - + Wipes the existing segments of this line and starts again from the last point Borra os segmentos existentes desta liña e comeza de novo dende o último punto - + Set WP Conxunto WP - + Reorients the working plane on the last segment Reorienta o plano de traballo sobre o último segmento - + Selects an existing edge to be measured by this dimension Escolma un bordo existente a ser medido por este acoutamento - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Se isto está activado, os obxectos serán copiados no lugar de moverse. Preferencias -> Borrador -> Copia global para manter este modo en próximos comandos - - options - opcións - - - + Default Por defecto - + Pick a face to define the drawing plane Escolmar unha cara para definir o plano de deseño - - First point: - Primeiro punto: - - - - Closing - Pechado - - - + Create Wire Crear arame - - Removing last point - Eliminar o último punto - - - - Next point: - Seguinte punto: - - - - Restarting from - Reiniciando dende - - - + Unable to create a Wire from selected objects Non é posible crear un Arame dende os obxectos escolmados - + Spline has been closed A Spline foi pechada - + Last point has been removed O último punto foi desbotado - - Pick next point, or Finish (shift-F) or close (o): - Coller o seguinte punto, ou Rematar (Shift-F) ou pechar (o): - - - + Create B-spline Facer B-spline - + Bezier curve has been closed A curva Bezier foi pechada - - Pick first point: - Escolma punto de inicio: - - - - Pick opposite point: - Escolma punto oposto: - - - - Pick center point: - Escolmar punto central: - - - - Pick radius: - Escolmar radio: - - - - Pick start angle: - Escolmar ángulo inicial: - - - - Pick aperture: - Escolmar apertura: - - - - Aperture angle: - Ángulo de apertura: - - - - Pick location point: - Escolmar punto de localización: - - - + Edges don't intersect! Os bordos non intersectan! - + Pick ShapeString location point: Escolme o punto de localización do TextoForma: - + Select an object to move Escolma un obxecto a mover - - Pick start point: - Escolmar punto inicial: - - - - Pick end point: - Escolma punto final: - - - + Select an object to rotate Escolma un obxecto a rotar - - Pick rotation center: - Escolma un punto de rotación: - - - - Pick base angle: - Escolma o ángulo base: - - - - Pick rotation angle: - Escolma un ángulo de rotación: - - - + Select an object to offset Escolma un obxecto para desplazar - + Offset only works on one object at a time O desprazamento só vai cun obxecto á vez - + Sorry, offset of Bezier curves is currently still not supported Desculpe, de momento o desprazamento de curvas Bézier non é soportado - - Pick distance: - Escolmar distancia: - - - + Select an object to stretch Escolma un obxecto a estirar - - Pick first point of selection rectangle: - Escolme o primeiro punto do rectángulo de selección: - - - - Pick opposite point of selection rectangle: - Escolma o punto oposto do rectángulo de selección: - - - - Pick start point of displacement: - Escolme o punto de principio do desprazamento: - - - - Pick end point of displacement: - Escolme o punto final do desprazamento: - - - + Turning one Rectangle into a Wire Tornar un Rectángulo en Arame - + Select an object to join Escolma un obxecto a xuntar - + Join Xuntar - + Select an object to split Escolma un obxecto a dividir - + Select an object to upgrade Escolme un obxecto para promover - + Select object(s) to trim/extend Escolme obxecto(s) a tallar/estender - + Unable to trim these objects, only Draft wires and arcs are supported Non é posible tallar estes obxectos, só son soportados arames e arcos no Bosquexo - + Unable to trim these objects, too many wires Non é posible tallar estes obxectos, demasiados arames - + These objects don't intersect Estes obxectos non intersectan - + Too many intersection points Demasiados puntos de intersección - + Select an object to scale Escolmar un obxecto a escalar - - Pick base point: - Escolmar punto base: - - - - Pick reference distance from base point: - Escolma nova distancia dende o punto base: - - - - Pick new distance from base point: - Escolma nova distancia dende o punto base: - - - + Select an object to project Escolma un obxecto a proxectar - - This object type is not editable - Este obxecto tipo non é editable - - - + Please select only one object Fai o favor de escolmar só un obxecto - + Select a Draft object to edit Escolma un obxecto Bosquexo a editar - + Active object must have more than two points/nodes O obxecto activo debe ter máis de dous puntos/nodos - + Endpoint of BezCurve can't be smoothed O punto final da Curva Bezier non se pode suavizar - + Select an object to convert Escolma un obxecto para convertir - + Select an object to array Escolma un obxecto da matriz - + Please select base and path objects Fai o favor de escolmar base e obxectos traxectoria - + Please select base and pointlist objects Fai o favor de escolmar a base e a lista de puntos de obxectos - + Select an object to clone Escolmar un obxecto a clonar - + Select face(s) on existing object(s) Escolme face(s) en obxecto(s) existente(s) - + Select an object to mirror Escolma un obxecto para espello - - Pick start point of mirror line: - Escolma un punto de inicio da liña de espello: - - - - Pick end point of mirror line: - Escolma o punto final da liña espello: - - - + This tool only works with Wires and Lines Esta ferramenta só traballa con Arames e Liñas - - - Pick target point: - Escolmar punto obxectivo: - - - - Pick endpoint of leader line: - Escolma o punto final da liña guía: - - - - Pick text position: - Escolmar posición do texto: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formalmente Teigha) Conversor de Ficheiros non atopado, soporte DWG desactivado - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s compartilla unha base con %d outros obxectos. Fai o favor de verificar se queres modificar esto. Subelement mode - Subelement mode + Modo subelemento - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Alternar entre edición radio e ángulo de arco - + Modify subelements - Modify subelements + Modificar subelementos - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Se está marcado, sub elementos modificaranse no lugar de obxectos enteiros - + CubicBezCurve - CubicBezCurve + Curva Cúbica Bezier - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Algúns sub elementos non se poden mover. - + Scale Escala - + Some subelements could not be scaled. - Some subelements could not be scaled. + Algúns sub elementos non poden ser escalados. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + O esbozo da parede base é demasiado complexo para editar: suxírese editar directamente o esbozo + + + + Top + Enriba + + + + Front + Fronte + + + + Side + Lado + + + + Current working plane + Actual plano de traballo + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automática + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotación + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Escolmar un obxecto a editar + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Calado + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilidades + + + + Wire tools + Ferramentas de arame + + + + Snapping + Forzado diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index 495d8c14a9..0e1b067e0d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 3c3f89cdd7..f7527649e6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern - Definira uzorak udubine + Određuje uzorak šrafiranja - + Sets the size of the pattern Postavlja veličinu uzorka - + Startpoint of dimension Startpoint dimenzije - + Endpoint of dimension Krajnje točke dimenzije - + Point through which the dimension line passes Točka kroz koju prolazi linija dimenzije - + The object measured by this dimension Objekt izmjeren od ove dimenzije - + The geometry this dimension is linked to Geometrija ove dimenzije je povezana sa - + The measurement of this dimension Mjerenje ove dimenzije - + For arc/circle measurements, false = radius, true = diameter Za luk/krug mjerenja, netočno= radijus, točno = promjer - + Font size Veličina Pisma - + The number of decimals to show Broj decimalnih mjesta za prikaz - + Arrow size Veličina strelice - + The spacing between the text and the dimension line Razmak između teksta i redka dimenzije - + Arrow type Vrsta strelice - + Font name Ime pisma - + Line width Širina linije - + Line color Boja linije - + Length of the extension lines Dužina linija produžetaka - + Rotate the dimension arrows 180 degrees Rotiranje strelice dimenzije 180 stupnjeva - + Rotate the dimension text 180 degrees Rotiraj tekst dimenzije 180 stupnjeva - + Show the unit suffix Pokaži dodatak mjerne jedinice (unit suffix) - + The position of the text. Leave (0,0,0) for automatic position Položaj teksta. Ostavite (0,0,0) za automatsku poziciju - + Text override. Use $dim to insert the dimension length Tekst prepiši. Koristite $dim za umetanje dimenzije duljina - + A unit to express the measurement. Leave blank for system default Jedinica za mjerenje. Ostavite prazno za sistemski zadani način - + Start angle of the dimension Početni kut dimenzije - + End angle of the dimension Krajnji kut dimenzije - + The center point of this dimension Središnja točka ove dimenzije - + The normal direction of this dimension Normalan smjer ove dimenzije - + Text override. Use 'dim' to insert the dimension length Tekst prepiši. Koristite 'dim' za umetanje dimenzije duljina - + Length of the rectangle Duljina pravokutnika - + Radius to use to fillet the corners Radijus za obrubljivanje uglova - + Size of the chamfer to give to the corners Veličina kosine za uglove - + Create a face Napravite naličje - + Defines a texture image (overrides hatch patterns) Definira teksture slike (nadjačava uzorak šrafure) - + Start angle of the arc Početni kut luka - + End angle of the arc (for a full circle, give it same value as First Angle) Krajnji kut luka (za puni krug, dodaj istu vrijednost kao za prvi kut) - + Radius of the circle Polumjer kruga - + The minor radius of the ellipse Sporedni polumjer elipse - + The major radius of the ellipse Glavni polumjer elipse - + The vertices of the wire Vrhovi žice - + If the wire is closed or not Ako žica je zatvoren ili ne - + The start point of this line Početna točka ove linije - + The end point of this line Krajnja točka ove linije - + The length of this line Dužina ove linije - + Create a face if this object is closed Stvaranje lice ako je ovaj objekt zatvoren - + The number of subdivisions of each edge Broj podvrsti svakog ruba - + Number of faces Broj naličja - + Radius of the control circle Radijus kontrolnog kruga - + How the polygon must be drawn from the control circle Kako se poligon mora izvući iz kontrolnog kruga - + Projection direction Smjer Projekcije - + The width of the lines inside this object Širina crta unutar ovog objekta - + The size of the texts inside this object Veličina tekstova unutar ovog objekta - + The spacing between lines of text Razmak između redaka teksta - + The color of the projected objects Boja linije projiciranih objekata - + The linked object Povezani objekt - + Shape Fill Style Stil ispune oblika - + Line Style Stil crte - + If checked, source objects are displayed regardless of being visible in the 3D model Ako je označeno, izvorni objekti prikazuju se bez obzira jesu li vidljivi u 3D modelu - + Create a face if this spline is closed Stvaranje lica, ako je ova krivulja zatvorena - + Parameterization factor Faktor Parametriranja - + The points of the Bezier curve Točke Bezijerove krivulje - + The degree of the Bezier function Stupanj Bezier funkcije - + Continuity Kontinuitet - + If the Bezier curve should be closed or not Da li Bezijerova krivulja treba biti zatvorena ili ne - + Create a face if this curve is closed Stvaranje lica, ako je ova kriva zatvorena - + The components of this block Komponente ovog bloka - + The base object this 2D view must represent Osnovni objekt 2D prikaza mora predstavljati - + The projection vector of this object Projekcijski vektor ovog objekta - + The way the viewed object must be projected Način na koji objekt pregleda mora biti projiciran - + The indices of the faces to be projected in Individual Faces mode Indeksi lica če biti projicirani u načinu rada pojedinih lica - + Show hidden lines Prikaži skrivene linije - + The base object that must be duplicated Osnovni objekt koji mora biti dupliciran - + The type of array to create Tip polja za stvaranje - + The axis direction Smjer osi - + Number of copies in X direction Broj kopija u X smjeru - + Number of copies in Y direction Broj kopija u Y smjeru - + Number of copies in Z direction Broj kopija u Z smjeru - + Number of copies Broj kopija - + Distance and orientation of intervals in X direction Razmak i orijentacija intervala u X smjeru - + Distance and orientation of intervals in Y direction Razmak i orijentacija intervala u Y smjeru - + Distance and orientation of intervals in Z direction Razmak i orijentacija intervala u Z smjeru - + Distance and orientation of intervals in Axis direction Razmak i orijentacija intervala u smjeru osi - + Center point Točka Središta - + Angle to cover with copies Kut za pokrivanje sa kopijama - + Specifies if copies must be fused (slower) Određuje ako se kopije moraju spajati (sporije) - + The path object along which to distribute objects Objekt puta na koji se raspodjeljuju objekti - + Selected subobjects (edges) of PathObj Odabrane subobjects (rubove) PathObj - + Optional translation vector Opcionalni vektor pomicanja - + Orientation of Base along path Usmjerenje baze uzduž puta - + X Location X Pozicija - + Y Location Y Pozicija - + Z Location Z Pozicija - + Text string Tekst riječ - + Font file name Ime datoteke pisma - + Height of text Visina teksta - + Inter-character spacing Unutrašnji razmak između znakova - + Linked faces Povezana lica - + Specifies if splitter lines must be removed Određuje ako linije dijeljenja moraju biti uklonjene - + An optional extrusion value to be applied to all faces Opcionalna vrijednost izguravanja za primjenu na svim naličjima - + Height of the rectangle Visina pravokutnika - + Horizontal subdivisions of this rectangle Horizontalne podjele ovog pravokutnika - + Vertical subdivisions of this rectangle Vertikalne podjele ovog pravokutnika - + The placement of this object polozaj objekta - + The display length of this section plane Dužina prikaza ovog djela ravni - + The size of the arrows of this section plane Veličina strelica ovog dijela ravni - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Za modalna linijska rezanja i rezanja lica, to ostavlja lica na mjestu reza - + The base object is the wire, it's formed from 2 objects Osnovni objekt je žica, sastoji se iz 2 predmeta - + The tool object is the wire, it's formed from 2 objects Objekt alat je žica, sastoji se iz 2 predmeta - + The length of the straight segment Dužina ravnog odsječaka - + The point indicated by this label Mjesto koje nosi ovu oznaku - + The points defining the label polyline Točke definiranja oznake izlomljena crta - + The direction of the straight segment Smjer ravnog odsječaka - + The type of information shown by this label Vrsta informacija prikazana po tom oznakom - + The target object of this label Ciljni objekt ove oznake - + The text to display when type is set to custom Tekst koji se prikazuje kada je vrsta slova prilagođeno - + The text displayed by this label Tekst prikazan pod tom oznakom - + The size of the text Veličina teksta - + The font of the text Vrsta pisma teksta - + The size of the arrow Veličina strelice - + The vertical alignment of the text Okomito poravnanje teksta - + The type of arrow of this label Vrsta strelice za ovu oznaku - + The type of frame around the text of this object Vrsta okvira oko teksta ovog objekta - + Text color Boja teksta - + The maximum number of characters on each line of the text box Maksimalni broj znakova u svakom retku tekstnog okvira - + The distance the dimension line is extended past the extension lines Udaljenost linija produljenja za koju je proširena linija dimenzije - + Length of the extension line above the dimension line Duljina linije protezanja iznad linije dimenzije - + The points of the B-spline Točke B-krivulje - + If the B-spline is closed or not Dali je B-krivulja zatvorena ili ne - + Tessellate Ellipses and B-splines into line segments Oblaganje elipsa i B-krive u linijske segmente - + Length of line segments if tessellating Ellipses or B-splines into line segments Duljine segmenta linije ako su obložene elipse ili B-krive u segmente linije - + If this is True, this object will be recomputed only if it is visible Ako je ovo istina, ovaj objekt se preraučna samo ako je vidljiv - + Base Baza - + PointList ListaTočaka - + Count Broj - + The objects included in this clone Objekti uključeni u ovaj klon - + The scale factor of this clone Faktor promjene veličine ovog klona - + If this clones several objects, this specifies if the result is a fusion or a compound Ako su to klonovi nekoliko objekata, određuje dali je rezultat spoj ili sastavljanje - + This specifies if the shapes sew Određuje dali se oblici sastavljaju - + Display a leader line or not Prikaži ili sakrij vodilice - + The text displayed by this object Tekst prikazan kod tog objekta - + Line spacing (relative to font size) Razmak između redaka (u odnosu na veličinu fonta) - + The area of this object - The area of this object + Područje ovog objekta - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Prikazuje simbol dimenzije na kraju žice - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Spoji zid i objekte strukture ako su istog tipa i materijala + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Nagib - + Scale Skaliraj - + Writing camera position Zapiši položaj kamere - + Writing objects shown/hidden state Zapiši stanje objekata prikazan/skriven - + X factor X faktor - + Y factor Y faktor - + Z factor Z faktor - + Uniform scaling Jedinstveno skaliranje - + Working plane orientation Orijentacija radne ravnine @@ -781,20 +816,25 @@ Molimo vas ručno instalirati dodatak dxf biblioteke iz izbornika Alati-> Addon Manager - + This Wire is already flat Ova žica je već ravna - + Pick from/to points Pokupi od/iz točaka - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Postavi nagib odabrane žice/linije: 0 = horizontalno, 1 = 45deg se, -1 = 45deg prema dolje + + + Create a clone + Stvori klon + DraftShapeStringGui @@ -846,28 +886,28 @@ iz izbornika Alati-> Addon Manager Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Unesite koordinate ili odaberite točku sa mišem. Reset 3d point selection - Reset 3d point selection + Obnovi odabir 3D točke Reset Point - Reset Point + Obnovi točku Draft_AddConstruction - + Add to Construction group Dodavanje grupe konstrukcije - + Adds the selected objects to the Construction group Dodaje odabrani objekt grupi konstrukcije @@ -875,12 +915,12 @@ iz izbornika Alati-> Addon Manager Draft_AddPoint - + Add Point Dodaj točku - + Adds a point to an existing Wire or B-spline Dodaje točku na postojeće žice ili B-krivulje @@ -888,12 +928,12 @@ iz izbornika Alati-> Addon Manager Draft_AddToGroup - + Move to group... Premjesti u grupu... - + Moves the selected object(s) to an existing group Premješta odarane objekte u jednu postojeću grupu @@ -901,12 +941,12 @@ iz izbornika Alati-> Addon Manager Draft_ApplyStyle - + Apply Current Style Primijeni aktualni stil - + Applies current line width and color to selected objects Primjenjuje trenutnu širinu linije i boju na odabrane objekte @@ -914,12 +954,12 @@ iz izbornika Alati-> Addon Manager Draft_Arc - + Arc Luk - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,33 +967,33 @@ iz izbornika Alati-> Addon Manager Draft_ArcTools - + Arc tools - Arc tools + Alati luka Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Luk iz 3 točke - + Creates an arc by 3 points - Creates an arc by 3 points + Stvori luk iz 3 točke Draft_Array - + Array Polje - + Creates a polar or rectangular array from a selected object Napravi polarni ili pravokutni raspored odabranih objekata u polju @@ -961,12 +1001,12 @@ iz izbornika Alati-> Addon Manager Draft_AutoGroup - + AutoGroup AutomatskaGrupa - + Select a group to automatically add all Draft & Arch objects to Odaberite grupu za automatsko dodavanje svih objekata nacrta i lukova @@ -974,12 +1014,12 @@ iz izbornika Alati-> Addon Manager Draft_BSpline - + B-spline B-krivulja - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Stvara više-točaka B-krivulju. CTRL za privući, SHIFT za ograničiti @@ -987,12 +1027,12 @@ iz izbornika Alati-> Addon Manager Draft_BezCurve - + BezCurve BezierKrivulja - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Stvara Bezierove krivulje. CTRL za privuci, SHIFT za ograniči @@ -1000,20 +1040,20 @@ iz izbornika Alati-> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + Bezier alati Draft_Circle - + Circle Krug - + Creates a circle. CTRL to snap, ALT to select tangent objects Napravi krug. CTRL za uhvatiti, ALT za odabir objekta na tangenti @@ -1021,12 +1061,12 @@ iz izbornika Alati-> Addon Manager Draft_Clone - + Clone Klon - + Clones the selected object(s) Klonira selektirane objekte @@ -1034,12 +1074,12 @@ iz izbornika Alati-> Addon Manager Draft_CloseLine - + Close Line Zatvori liniju - + Closes the line being drawn Zatvara se nacrtana linija @@ -1047,12 +1087,12 @@ iz izbornika Alati-> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Ukloni točku - + Removes a point from an existing Wire or B-spline Uklanja točku iz postojeće žice ili B-krivulje @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimenzija - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Napravi dimenziju. CTRL za uhvatiti, SHIFT za ograničavanje pomaka, ALT za odabir segmenta @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Razbiti - + Explodes the selected objects into simpler objects, or subtracts faces Razdvaja odabrane objekte u jednostavnije objekte ili uklanja lica @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Nacrt u skicu - + Convert bidirectionally between Draft and Sketch objects Bidirekcionalno konvertiraj između Nacrta i Skice @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Crtež - + Puts the selected objects on a Drawing sheet Stavlja odabrane objekte na list crteža @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Uredi - + Edits the active object Uređivanje aktivnog objekta @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Uredi poboljšano - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Uređivanje odabranih objekata Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Napravi elipsu. CTRL za privuci @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Poveznice lica - + Creates a facebinder object from selected face(s) Stvara objekt poveznica lica iz odabranog(ih) lica @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Završi liniju - + Finishes a line without closing it Završava linija bez zatvaranja @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Okreni Dimenziju - + Flip the normal direction of a dimension Okretanje u normalnom smjeru dimenzije @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Izliječiti - + Heal faulty Draft objects saved from an earlier FreeCAD version Ispravi neispravne nacrte objekata spremljene sa starijom verzijom FreeCAD-a @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Spoji - + Joins two wires together Spoji dvije žice zajedno @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Oznaka - + Creates a label, optionally attached to a selected object or element Stvara natpis, po želji na odabrani objekt ili element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linija - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Napravi liniju pomoću dvije točke. CTRL za uhvatiti, SHIFT za ograničiti postavljanje @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Zrcaljenje - + Mirrors the selected objects along a line defined by two points Zrcaljenje odabranih objekata duž linije definirane kroz dvije točke @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Pomicanje - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Pomak - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Pomiče aktivni objekt. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray StazaRasporeda - + Creates copies of a selected object along a selected path. Stvara kopije odabranih objekata uzduž odabranog puta. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Točka - + Creates a point object Kreira točku @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray MatricaTočaka - + Creates copies of a selected object on the position of points. Stvara kopije odabranih objekata na položaj točaka. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Poligon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Napravi Poligon. CTRL za uhvatiti, SHIFT za ograničiti pomicanje @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Pravokutnik - + Creates a 2-point rectangle. CTRL to snap Napravi pravokutnik pomoću 2 nasuprotna vrha. CTRL za uhvatiti @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rotiraj - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Rotira odabrane objekte. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skaliraj - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skalira odabrane objekte iz osnovne točke. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Odaberi grupu - + Selects all objects with the same parents as this group Odabire sve objekte s istim roditeljima koje ima ova grupa @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane OdaberiteRavninu - + Select a working plane for geometry creation Odaberite ravninu za rad @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Napravi proxy objekt iz trenutne radne ravnine - + Create Working Plane Proxy Napravi radnu Proxy ravninu @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D prikaz oblika - + Creates Shape 2D views of selected objects Napravi 2D pogled odabranih objekata @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Oblik iz teksta... - + Creates text string in shapes. Stvara tekstni niz u obliku. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Prikaži Alatnu traku za hvatanje - + Shows Draft snap toolbar Prikaži Draft snap alat @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Postavite nagib - + Sets the slope of a selected Line or Wire Određuje nagib za odabranu liniju ili žicu @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Kutevi - + Snaps to 45 and 90 degrees points on arcs and circles Sjedne na 45 i 90 stupnjeva točke od lukova i krugova @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Središte - + Snaps to center of circles and arcs Privuci na središte kruga i luka @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimenzije - + Shows temporary dimensions when snapping to Arch objects Sadrži privremene dimenzije kada je privučeno na objekte luka @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Krajnja točka - + Snaps to endpoints of edges Privuci na krajnje točke ruba @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Proširenje - + Snaps to extension of edges Privuci na krajnje točke ruba @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Rešetka - + Snaps to grid points Privuci na rešetku @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Presjek - + Snaps to edges intersections Privuci na rub sjecišta @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Prekidač uključivanje/isključivanje - + Activates/deactivates all snap tools at once Aktiviraj/deaktiviraj sva privlačenja odjednom - + Lock Zaključaj @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Srednja točka - + Snaps to midpoints of edges Privuci na sredinu ruba @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Najbliži - + Snaps to nearest point on edges Privuci na najbližu točku ruba @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Okomito - + Snaps to orthogonal and 45 degrees directions Privuci na okomicu i smjer 45 stupnjeva @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralelno - + Snaps to parallel directions of edges Privuci na paralelu ruba @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Okomito - + Snaps to perpendicular points on edges Privuci na okomito od rubova @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Poseban - + Snaps to special locations of objects Privuci na posebne lokacije objekata @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Radna Ravnina - + Restricts the snapped point to the current working plane Ograničava privuci točke trenutnu radnu ravninu @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Razdjeli - + Splits a wire into two wires Razdjeli žicu na dvije žice @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Rastegni - + Stretches the selected objects Pomiče odabrane objekte @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Napravi komentar. CTRL za uhvatiti @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Uključuje/isključuje mod izgradnje za sljedeće objekte. - + Toggle Construction Mode Uključivanje/isključivanje konstrukcijskog moda @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Uključivanje/isključivanje Načina Nastaviti - + Toggles the Continue Mode for next commands. Uključuje način nastavljanja za sljedeće naredbe. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Promjeni način prikaza - + Swaps display mode of selected objects between wireframe and flatlines Zamjenjuje način prikaza odabranih objekata između "Samo žice" i "Ravne linije" @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Uključi/isključi rešetku - + Toggles the Draft grid on/off Uključuje/isključuje rešetku nacrta (on/off) - + Grid Rešetka - + Toggles the Draft grid On/Off Uključuje/isključuje rešetku nacrta (On/Off) @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Skraćuje ili produžuje odabrani objekt ili izvlači površine. CTRL za ograničiti, SHIFT ograničava izvlačenje po normali, ALT invertira @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Poništi posljednji segment - + Undoes the last drawn segment of the line being drawn Poništava posljednji nacrtani segment polilinije koja se postavlja @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Nadogradnja - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Spaja odabrane objekte u jedan, ili pretvara zatvorene žice u ispunjena lica ili ujedinjuje lica - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Dodaje se VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Napravi žicu nacrta (DWire). CTRL za hvatanje, SHIFT za ograničavanje + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Žica u B-krivulju - + Converts between Wire and B-spline Pretvara između žice i B-krivulje @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Glavne postavke nacrta - + This is the default color for objects being drawn while in construction mode. Ovo je zadana boja za objekte koji se izrađuju u modu izgradnje. - + This is the default group name for construction geometry Ovo je zadani naziv grupe za izgradnju geometrije - + Construction Izgradnja @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSpremi trenutnu boju i širinu linije na sve objekte u ovoj sesiji - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Ako je ovo uključeno, kopiranje će se primjeniti za sve naredbe, inače će se naredbe uvijek pokrenuti bez kopiranja - + Global copy mode Globalni način kopiranja - + Default working plane Zadana ravnina rada - + None Prazno - + XY (Top) XY (Gore) - + XZ (Front) XZ (Naprijed) - + YZ (Side) YZ (Strana) @@ -1988,12 +2023,12 @@ kao što su "Arial:Bold" Glavne postavke - + Construction group name Ime grupe konstrukcije - + Tolerance Tolerancija @@ -2018,22 +2053,22 @@ kao što su "Arial:Bold" Ovdje možete navesti direktorij koji sadrži SVG datoteka koje sadrže <pattern> definicije koji se mogu dodati standardnom Draft uzorku - + Draft interface mode Način rada - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Ovo je način na koji će raditi sučelje: Toolbar način će se sve Draft postavke staviti u odvojenoj alatnoj traci, dok Taskbar način koristiti sustav FreeCAD Taskview za interakciju s korisnikom - + Toolbar Alatna traka - + Taskview Pregled zadataka @@ -2063,12 +2098,12 @@ kao što su "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalno, nakon kopiranja objekata, kopija se selektira. Ako je ova opcija uključena, osnovni će objekti biti selektirani. - + Select base objects after copying Odaberite bazu objekata nakon kopiranja @@ -2103,7 +2138,7 @@ kao što su "Arial:Bold" Glavne linije će biti deblje crtane. Ovdje postaviti koliko kvadrata je među njima. - + Internal precision level Interni nivo preciznosti @@ -2218,12 +2253,12 @@ kao što su "Arial:Bold" Prevedi bijelu boju linije u crnu - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Kada to je označeno, alat Nacrt će stvoriti primitivni Dio umjesto objekta Nacrta, ako je dostupno. - + Use Part Primitives when available Koristite primitivni dio kada su dostupni @@ -2243,12 +2278,7 @@ kao što su "Arial:Bold" Uvijek privuci (onesposobi privuci prekidač mod) - - Construction geometry - Geometrija za konstrukciju - - - + Construction geometry color Boja konstrukcijske geometrije @@ -2388,7 +2418,7 @@ kao što su "Arial:Bold" Odaberite datoteku pisma - + Fill objects with faces whenever possible Ispunite objekte s licima kad god je moguće @@ -2678,7 +2708,7 @@ kao što su "Arial:Bold" Automatska nadogradnja (samo naslijeđeni uvoznik) - + Prefix labels of Clones with: Prefiks oznake klonova sa: @@ -2717,7 +2747,7 @@ Primjer: za datoteke u milimetrima: 1, centimetrima: 10, metrima: 1000, u inčim Ova metoda odabrana je za uvoz SVG boje objekta u FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Ako je to označeno, objekti će se pojaviti ispunjeni prema zadanim postavkama. Inače, oni će se pojaviti kao žičani model @@ -2797,17 +2827,7 @@ Primjer: za datoteke u milimetrima: 1, centimetrima: 10, metrima: 1000, u inčim Ako je to označeno, objekti istih slojeva će biti spojeni u blokove nacrta, prikazuju se brže ali su kompliciraniji za uređivanje - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Ako je to označeno, step-by-step (korak po korak) upute će se prikazati u izlaznom prozoru kada se pokreću naredbe nacrta - - - - Verbose command line mode - Opširni mod komandne linije - - - + When drawing lines, set focus on Length instead of X coordinate Prilikom crtanja linije, postavi fokus na duljinu umjesto na X koordinatu @@ -2887,12 +2907,12 @@ Primjer: za datoteke u milimetrima: 1, centimetrima: 10, metrima: 1000, u inčim Max segmenta krivulje: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2903,693 +2923,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Konstrukcijska Geometrija + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativno + + + + R + R + + + + Continue + Nastavi + + + + T + T + + + + Close + Zatvori + + + + O + O + + + + Copy + Kopiraj + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Ispuni + + + + L + L + + + + Exit + Izađi + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Dužina + + + + H + H + + + + Wipe + Obriši + + + + W + W + + + + Set WP + Postavljanje WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Ograničeno X + + + + X + X + + + + Restrict Y + Ograničeno Y + + + + Y + Y + + + + Restrict Z + Ograničeno Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Privuci Nacrt - - - Draft creation tools - Alati za kreiranje Nacrta - - - - Draft modification tools - Alati za izmjene nacrta - - - - Utilities - Uslužni programi - - - - Wire tools - alati konture - - - - Snapping - Privuci - draft - + not shape found nisam našao oblik - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Naredbene trake nacrta - + Toggle construction mode Uključivanje/isključivanje konstrukcijskog moda - + Current line color Aktualna boja linije - + Current face color Aktualna boja lica - + Current line width Aktualna širina linije - + Current font size Trenutna veličina slova - + Apply to selected objects Primijeni na odabrane objekte - + Autogroup off Auto grupa isključena - + active command: aktivna naredba: - + None Prazno - + Active Draft command Aktivna naredbu nacrta - + X coordinate of next point X koordinate sljedeće točke - + X X - + Y Y - + Z Z - + Y coordinate of next point Y koordinate sljedeće točke - + Z coordinate of next point Z koordinate sljedeće točke - + Enter point Unesi točku - + Enter a new point with the given coordinates Unesite novu točku s danim koordinatama - + Length Dužina - + Angle Kut - + Length of current segment Dužina aktualnog odjeljka - + Angle of current segment Kut aktualnog odjeljka - + Radius Radijus - + Radius of Circle Radijus kruga - + If checked, command will not finish until you press the command button again Ako je označeno, naredba neće završiti sve dok se ponovno ne pritisnete gumb naredbe - + If checked, an OCC-style offset will be performed instead of the classic offset Ako je označeno, pomak u OCC stilu izvršiti će se umjesto klasičnog pomaka - + &OCC-style offset pomak u &OCC-stilu - + Add points to the current object Dodaj točke trenutnom objektu - + Remove points from the current object Ukloni točke iz trenutnog objekta - + Make Bezier node sharp Napravi Bezier čvorove oštrim - + Make Bezier node tangent Napravi Bezier čvorove tangencijalno - + Make Bezier node symmetric Napravi Bezier čvorove simetrično - + Sides Strane - + Number of sides Broj strana - + Offset Pomak - + XY (top) XY (vrh) - - Select XY plane - Odaberite XY ravninu - - - + XZ (front) XZ (prednje) - - Select XZ plane - Odaberite XZ ravninu - - - + YZ (side) YZ (strana) - - Select YZ plane - Odaberite YZ ravninu - - - + View Pregled - - Select plane perpendicular to the current view - Odaberite ravnini okomito na trenutnom prikazu - - - + Auto Automatski - - Do not project points to a drawing plane - Ne projeciraj točke na crtaču ravninu - - - + Text string to draw Tekst za crtanje - + String Tekst (string) - + Height of text Visina teksta - + Height Visina - + Intercharacter spacing Unutrašnji razmak između znakova - + Tracking Praćenje - + Full path to font file: Cijeli put do datoteke pisma: - + Open a FileChooser for font file Otvorite FileChooser za datoteku fonta - + Grid spacing Veličina rešetke - + The spacing between the grid lines Razmak između linija rešetke - + Main line every Glavna linija svakih - + The number of lines between main lines Broj linija između glavnih linija - + Center plane on view Centriraj ravninu na pogled - - Select Plane - Odaberite ravninu - - - + Line Linija - + DWire DWire - + Circle Krug - + Center X Centar X - + Arc Luk - + Point Točka - + Label Oznaka - + Distance Udaljenost - + Trim Skrati - + Pick Object Odaberite objekt - + Edit Uredi - + Global X Globalno X - + Global Y Globalno Y - + Global Z Globalno Z - + Local X Lokalno X - + Local Y Lokalno Y - + Local Z Lokalno Z - + Invalid Size value. Using 200.0. Pogrešna veličina vrijednosti. Koristit će se 200.0. - + Invalid Tracking value. Using 0. Pogrešna veličina vrijednosti. Koristit će se 0. - + Please enter a text string. Molimo vas, unesite tekst poruke. - + Select a Font file Odaberite datoteku pisma - + Please enter a font file. Molim unesite datoteku pisma. - + Autogroup: AutomatskaGrupa: - + Faces Plohe - + Remove Ukloniti - + Add Dodaj - + Facebinder elements Facebinder elements - + Create Line Napravi liniju - - Pick next point: - - Odaberite sljedeću točku - - - + Convert to Wire Pretvori u žicu - + BSpline BSpline - + BezCurve BezierKrivulja - + Create BezCurve Napravi BezKrivu - + Rectangle Pravokutnik - + Create Plane Napravi ravninu - + Create Rectangle Napravi pravokutnik - + Create Circle Kreiraj krug - + Create Arc Kreiraj luk - + Start Angle Početni kut - + Aperture Apertura - + Polygon Poligon - + Create Polygon Kreiraj poligon - + Ellipse Elipsa - + Create Ellipse Napravi Elipsu - + Text Tekst - + Create Text Stvori tekst - + Dimension Dimenzija - + Create Dimension Kreiraj dimenziju - + ShapeString Oblik Teksta - + Create ShapeString Napravi OblikTeksta - + Copy Kopiraj - + Move Pomicanje - + Change Style Promjeni stil - + Rotate Rotiraj - - Cannot offset this object type - - Ne mogu pomaknuti ovaj tip objekta - - - + Stretch Rastegni - + Upgrade Nadogradnja - + Downgrade Razbiti - + Selection is not a Knot Odabrano nije čvor - + Convert to Sketch Pretvori u Skicu - + Convert to Draft Pretvori u Nacrt - + Convert Pretvori - + Array Polje - + Create Point Stvori točku - + Mirror Zrcaljenje - + &Draft &Nacrt @@ -3613,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes). - + Draft.makeBSpline: not enough points Crtanje.napravi B-krivulju: nema dovoljno točaka - + Draft.makeBSpline: Equal endpoints forced Closed Crtanje.napravi B-krivulju: Jednake točke prisilno zatvorene - + Draft.makeBSpline: Invalid pointslist Crtanje.napravi B-krivulju: pogreška u listi točaka - + No object given Nema danog objekta - + The two points are coincident Dvije točke se podudaraju - + Found groups: closing each open object inside Pronađene grupe: zatvara svaki otvoreni objekt unutar - + Found mesh(es): turning into Part shapes Pronađena mreža(e): postaje Dio oblik - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Pronađena 2 objekta: spoji njih - + Found several objects: creating a shell Pronađeno nekoliko objekata: Izrada ljuske - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Pronađen 1 zatvoreni objekt skice: stvaranje lice od njega - + Found 1 linear object: converting to line Pronađen 1 linearni objekt: pretvaranje u liniju - + Found closed wires: creating faces Našao zatvorene žice: stvaranje lica - + Found 1 open wire: closing it Pronađena 1 otvorena žica: spajanje - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Nije moguće ažurirati ove objekte. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Pronađeno nekoliko lica: razdjeli ih - + Found several objects: subtracting them from the first one Pronađeno nekoliko objekata: oduzimanje tih objekata od prvog objekta - + Found 1 face: extracting its wires Pronađeno 1 lice: izdvajanje njegovih žica - + Found only wires: extracting their edges Našao samo žice: izdvajanje njihovih rubova - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _B-krivulja.napraviGeometriju: zatvoreno s istom prvom/zadnjom točkom. Geometrija se ne ažurira. - + No point found Nije pronađena točka - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relativno - + Continue Nastavi - + Close Zatvori @@ -3830,7 +3998,7 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Ograničeno Z - + Select edge Odaberite rub @@ -3845,7 +4013,7 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Dužina mod - + Wipe Obriši @@ -3860,513 +4028,636 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Cycle snap object - + Check this to lock the current angle Uključi za zaključavanje aktualnog kuta - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Ispunjeno - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Završiti - + Finishes the current drawing or editing operation Završava aktualni crtež ili uređuje operacije - + &Undo (CTRL+Z) &Poništi (CTRL + Z) - + Undo the last segment Poništiti posljednji segment - + Finishes and closes the current line Završi i zatvori aktualnu liniju - + Wipes the existing segments of this line and starts again from the last point Briše postojeće segmente ovog retka i počinje ponovo od zadnje točke - + Set WP Postavljanje WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Odabire postojeći rub za mjerenje sa ovom dimenzijom - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Ako je označeno, objekti će se kopirati umjesto premještanja. Postavke-> Nacrt-> Globalno kopiranje mod da bi zadržao ovaj mod u sljedećim naredbama - - options - opcije - - - + Default Inicijalno - + Pick a face to define the drawing plane Odaberite lice da bi ste definirali ravninu crteža - - First point: - Prva točka: - - - - Closing - Zatvaranje - - - + Create Wire Stvaranje žice - - Removing last point - Uklanjanje zadnje točke - - - - Next point: - Sljedeća točka: - - - - Restarting from - Resetiranje iz - - - + Unable to create a Wire from selected objects Nije moguće stvoriti žicu od odabranih objekata - + Spline has been closed Kriva je zatvorena - + Last point has been removed Zadnja točka je uklonjena - - Pick next point, or Finish (shift-F) or close (o): - Odaberite slijedeću točku, ili završna obrada (Shift-F) ili zatvaranje (o): - - - + Create B-spline Stvaranje B-spline - + Bezier curve has been closed Bezierova krivulja je zatvorena - - Pick first point: - Odaberite početnu točku: - - - - Pick opposite point: - Odaberite suprotnu točku: - - - - Pick center point: - Odaberite srednju točku: - - - - Pick radius: - Odaberite radijus: - - - - Pick start angle: - Odaberite početni kut: - - - - Pick aperture: - Odaberite otvor: - - - - Aperture angle: - Kut otvora: - - - - Pick location point: - Odaberite točku položaja: - - - + Edges don't intersect! Rubovi se ne križaju! - + Pick ShapeString location point: Odaberite ShapeString mjesto točke: - + Select an object to move Odaberite objekt za pomak - - Pick start point: - Odaberite početnu točku: - - - - Pick end point: - Odaberite krajnju točku: - - - + Select an object to rotate Odaberite objekt za rotaciju - - Pick rotation center: - Odaberite središte rotacije: - - - - Pick base angle: - Odaberite početni kut: - - - - Pick rotation angle: - Odaberite kut rotacije: - - - + Select an object to offset Odaberite objekt za pomak - + Offset only works on one object at a time Pomak radi samo na jednom objektu trenutno - + Sorry, offset of Bezier curves is currently still not supported Žao nam je, pomak Bezijerove krivulje trenutno još uvijek nije podržan - - Pick distance: - Odaberite udaljenost: - - - + Select an object to stretch Odaberite objekt za pomak - - Pick first point of selection rectangle: - Izaberite prvu točku na izborniku pravokutnika: - - - - Pick opposite point of selection rectangle: - Izaberite suprotnu točku na izborniku pravokutnika: - - - - Pick start point of displacement: - Odaberite početnu točku premještanja: - - - - Pick end point of displacement: - Odaberite završnu točku premještanja: - - - + Turning one Rectangle into a Wire Prebaci jedan pravokutnik u Žicu - + Select an object to join - Select an object to join + Odaberite objekt za spojiti - + Join Spoji - + Select an object to split - Select an object to split + Odaberite objekt za razdvajanje - + Select an object to upgrade Odaberite objekt za nadogradnju - + Select object(s) to trim/extend Odaberite objekt(e) za skraćivanje/produživanje - + Unable to trim these objects, only Draft wires and arcs are supported Nije moguće skratiti te objekte, samo žice i lukovi Nacrta su podržani - + Unable to trim these objects, too many wires Nije moguće skratiti te objekte, previše žica - + These objects don't intersect Ovi objekti se ne sijeku - + Too many intersection points Previše sjecišta - + Select an object to scale Odaberite objekt za skaliranje - - Pick base point: - Odaberite točku odredišta: - - - - Pick reference distance from base point: - Odaberite referencu udaljenost od bazne točke: - - - - Pick new distance from base point: - Odaberite novu udaljenost od bazne točke: - - - + Select an object to project Odaberite jedan objekt za projekt - - This object type is not editable - Ovaj objekt nije moguće uređivati - - - + Please select only one object Odaberite samo jedan objekt - + Select a Draft object to edit Odaberite Nacrt objekt za uređivanje - + Active object must have more than two points/nodes Aktivni objekt mora imati više od dvije točke/čvorišta - + Endpoint of BezCurve can't be smoothed Ishod BezCurve može biti izglađen - + Select an object to convert Odaberite objekt za konvertiranje - + Select an object to array Odaberite objekt za matricu - + Please select base and path objects Molimo odaberite osnovni objekt i objekte puta - + Please select base and pointlist objects Molimo odaberite osnovni objekt i objekte liste točaka - + Select an object to clone Odaberite objekt za kloniranje - + Select face(s) on existing object(s) Odaberite lice(a) na postojećim objektu(ima) - + Select an object to mirror Odaberite objekt za zrcaljenje - - Pick start point of mirror line: - Odaberite početnu točku od linije zrcaljenja: - - - - Pick end point of mirror line: - Odaberite krajnju točku od linije zrcaljenja: - - - + This tool only works with Wires and Lines Ovaj alat radi samo sa Žicama i Linijama - - - Pick target point: - Odaberite točku odredišta: - - - - Pick endpoint of leader line: - Odaberite krajnju točku od linije vođenja: - - - - Pick text position: - Odaberite poziciju teksta: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. Subelement mode - Subelement mode + Pod-element mod - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements - Modify subelements + Izmjene pod-elemenata - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Neke pod elemente nije bilo moguće premjestiti. - + Scale Skaliraj - + Some subelements could not be scaled. - Some subelements could not be scaled. + Neke pod elemente nije bilo moguće skalirati. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Gore + + + + Front + Ispred + + + + Side + Strana + + + + Current working plane + Aktualna radna ravnina + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatsko + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotacija + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Odaberite objekt za uređivanje + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Skica + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Uslužni programi + + + + Wire tools + alati konture + + + + Snapping + Privuci + diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index f1d742a916..7933a7df39 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 395f19bdac..b4a29846b8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Megadja a kitöltési mintát - + Sets the size of the pattern Beállítja a minta méretet - + Startpoint of dimension Méretvonal kezdőpontja - + Endpoint of dimension Méretvonal végpontja - + Point through which the dimension line passes Pont, amelyen áthalad a méretvonal - + The object measured by this dimension Ezzel a méretvonallal mért tárgy - + The geometry this dimension is linked to A méretvonalhoz kapcsolódó geometria - + The measurement of this dimension Ennek a méretvonalnak a mérete - + For arc/circle measurements, false = radius, true = diameter Ív/kör mérésekhez, hamis = sugár, igaz = átmérő - + Font size Betűméret - + The number of decimals to show Hány tizedes megjelenítése - + Arrow size Nyíl méret - + The spacing between the text and the dimension line A szöveg és a méretvonal távolsága - + Arrow type Nyíl típus - + Font name Betűtípus neve - + Line width Vonalvastagság - + Line color Vonalszín - + Length of the extension lines A méret segédvonalak hossza - + Rotate the dimension arrows 180 degrees A méretvonal nyilainak 180 fokos forgatása - + Rotate the dimension text 180 degrees A méretszöveg 180 fokos forgatása - + Show the unit suffix Mértékegység utótag megjelenítése - + The position of the text. Leave (0,0,0) for automatic position A szöveg helyzete. Hagyja (0,0,0) értéken az automatikus pozicionáláshoz - + Text override. Use $dim to insert the dimension length Szöveg felülírása. Helyezze be a méretvonal hosszúságát a $dim segítségével - + A unit to express the measurement. Leave blank for system default Egy mértékegység a mérési egység kifejezéséhez. Hagyja üresen a rendszer alapértelmezetthez - + Start angle of the dimension Kezdőszög, a méretvonalhoz - + End angle of the dimension Záró szög, a méretvonalhoz - + The center point of this dimension Ennek a méretvonalnak a középpontja - + The normal direction of this dimension A méretvonal alapértelmezett iránya - + Text override. Use 'dim' to insert the dimension length Szöveg felülírása. Helyezze be a méretvonal hosszúságát a 'dim' segítségével - + Length of the rectangle A téglalap hossza - + Radius to use to fillet the corners Sarkok lekerekítéséhez használt rádiusz - + Size of the chamfer to give to the corners Sarkokhoz használt letörés mérete - + Create a face Felület létrehozása - + Defines a texture image (overrides hatch patterns) Határozza meg a textúrafájlt (felülbírálja a kitöltési mintákat) - + Start angle of the arc Ív kezdőszöge - + End angle of the arc (for a full circle, give it same value as First Angle) Ív befejező szöge (egy teljes körhöz, adja meg a kezdő szög értékét) - + Radius of the circle Kör sugara - + The minor radius of the ellipse Ellipszis alárendelt sugara - + The major radius of the ellipse Ellipszis fő sugara - + The vertices of the wire Drótháló sarkai - + If the wire is closed or not Drótháló be van zárva, vagy nem - + The start point of this line Ennek a vonalnak az induló pontja - + The end point of this line Ennek a vonalnak a végpontja - + The length of this line Ennek a vonalnak a hossza - + Create a face if this object is closed Hozzon létre egy felületet, ha ez az objektum le van zárva - + The number of subdivisions of each edge Minden él alosztályainak száma - + Number of faces Felületek száma - + Radius of the control circle Vezérlő kör sugara - + How the polygon must be drawn from the control circle Hogyan kell a sokszöget rajzolni a vezérlő körről - + Projection direction Vetítési irány - + The width of the lines inside this object A vonalak vastagsága ebben a tárgyban - + The size of the texts inside this object A szöveg vastagsága ebben az objektumban - + The spacing between lines of text A szövegsorok közötti térköz - + The color of the projected objects A vetített objektumok színe - + The linked object A kapcsolt objektum - + Shape Fill Style Alakzat kitöltési stílus - + Line Style Vonalstílus - + If checked, source objects are displayed regardless of being visible in the 3D model Ha be van jelölve, a forrásobjektumok megjelenik függetlenül attól, hogy látható legyen, a 3D-s modellben - + Create a face if this spline is closed Hozzon létre egy felületet, ha ez a görbe le van zárva - + Parameterization factor Paraméterezés tényező - + The points of the Bezier curve A Bezier-görbe pontjai - + The degree of the Bezier function A Bezier-függvény mértéke - + Continuity Folytonosság - + If the Bezier curve should be closed or not Ha a Bezier-görbét zárni kell, vagy nem - + Create a face if this curve is closed Hozzon létre egy felületet, ha ez a görbe le van zárva - + The components of this block Ennek a blokknak az összetevői - + The base object this 2D view must represent Az alap objektumot ennek a 2D nézetnek kell képviselnie - + The projection vector of this object Ennek az objektumnak a vetítési vektora - + The way the viewed object must be projected A megtekintett objektum vetítésének az útja - + The indices of the faces to be projected in Individual Faces mode A mutatott felületek vetítése az Egyéni felület módban - + Show hidden lines Mutassa a rejtett vonalakat - + The base object that must be duplicated Az alap objektum, melyet meg kell kettőzni - + The type of array to create Létrehozandó tömb típusa - + The axis direction A tengely iránya - + Number of copies in X direction Másolatok száma X irányban - + Number of copies in Y direction Másolatok száma Y irányban - + Number of copies in Z direction Másolatok száma Z irányban - + Number of copies Másolatok száma - + Distance and orientation of intervals in X direction Távolság és közök tájolása az X irányban - + Distance and orientation of intervals in Y direction Távolság és közök tájolása az Y irányban - + Distance and orientation of intervals in Z direction Távolság és közök tájolása az Z irányban - + Distance and orientation of intervals in Axis direction Távolság és közök tájolása az Tengely irányban - + Center point Középpont - + Angle to cover with copies Szög a másolattokkal fedéshez - + Specifies if copies must be fused (slower) Itt adható meg, ha másolatokat be kell olvasztani (lassabb) - + The path object along which to distribute objects Az objektum menti útvonal, amely az objektumokat elosztja - + Selected subobjects (edges) of PathObj A PathObj kijelölt al-objektumai (élek) - + Optional translation vector Választható elfordítás vektor - + Orientation of Base along path Alap menti útvonal betájolása - + X Location X hely - + Y Location Y hely - + Z Location Z-hely - + Text string Szöveglánc - + Font file name Betűtípus fájl név - + Height of text Szöveg magassága - + Inter-character spacing Karakteren-bellüli térköz - + Linked faces Csatolt felületek - + Specifies if splitter lines must be removed Itt adható meg, ha el kell távolítani a daraboló vonalak - + An optional extrusion value to be applied to all faces Az összes felületre alkalmazandó, választható kihúzási érték - + Height of the rectangle A téglalap magassága - + Horizontal subdivisions of this rectangle Ennek a téglalapnak a vízszintes felosztása - + Vertical subdivisions of this rectangle Ennek a téglalapnak a függőleges felosztása - + The placement of this object Ennek az objektumnak az elhelyezése - + The display length of this section plane A metszősík megjelenítési hossza - + The size of the arrows of this section plane Metszősík nyilainak a nagysága - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location A Vonalvágás és Felületvágás módhoz, ez a felületeket a vágási helynél meghagyja - + The base object is the wire, it's formed from 2 objects Az alap objektum a drótháló, 2 objektumból képzett - + The tool object is the wire, it's formed from 2 objects Az eszköz objektum a drótháló, 2 objektumból képzett - + The length of the straight segment Az egyenes szakasz hossza - + The point indicated by this label A pontot ez a címke jelzi - + The points defining the label polyline A pontok meghatározzák a címke vonalláncot - + The direction of the straight segment Az egyenes szakasz iránya - + The type of information shown by this label Ez a címke által megjelenített információ típusa - + The target object of this label Ennek a címkének a cél tárgya - + The text to display when type is set to custom A szöveg megjelenítése ha a típusa egyéni szöveg - + The text displayed by this label Ezzel a címkével megjelenített szöveg - + The size of the text A szöveg mérete - + The font of the text A szöveg betütípusa - + The size of the arrow A nyíl mérete - + The vertical alignment of the text A szöveg függőleges igazítása - + The type of arrow of this label Ennek a címkének a nyíl típusa - + The type of frame around the text of this object A keret a szöveg körül ehhez a tárgyhoz - + Text color Szöveg szín - + The maximum number of characters on each line of the text box A szöveg doboz soronkénti karaktereinek maximális száma - + The distance the dimension line is extended past the extension lines A meghoszabbítás utáni méretsegédvonal meghosszabbításának hossza - + Length of the extension line above the dimension line A méretvonal felett a méretmeghoszabbítás hossza - + The points of the B-spline Az B-görbe pontjai - + If the B-spline is closed or not Ha a B-görbe lezárt vagy sem - + Tessellate Ellipses and B-splines into line segments Mozaikos ellipsziseket és B-Görbéket vonalszakaszokban - + Length of line segments if tessellating Ellipses or B-splines into line segments Vonalszakaszok hosszai, ha mozaikos ellipsziseket vagy B-görbéket a vonalszakaszokba - + If this is True, this object will be recomputed only if it is visible Ha ez igaz, ez a tárgy csak akkor lesz újraszámítva, ha látható - + Base Alap - + PointList Pont Lista - + Count Számol - + The objects included in this clone Ebben a klónban szereplő tárgyak - + The scale factor of this clone Ennek a klónnak a léptéktényezője - + If this clones several objects, this specifies if the result is a fusion or a compound Ha ez több tárgyat klónoz, ez adja meg, hogy az eredmény fúzió vagy egyesítés - + This specifies if the shapes sew Ez határozza meg, ha a test varrott - + Display a leader line or not Vezető vonal meg jelenítése, vagy sem - + The text displayed by this object Ezzel a tárggyal megjelenített szöveg - + Line spacing (relative to font size) Egyenes illesztés (relatív a betűméretehez) - + The area of this object - The area of this object + Ennek a tárgynak az területe - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Megjelenít egy méret szimbólumot a drótháló végén - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Ugyanazon típusú anyagból készült fal és építő elemeket olvaszt egybe + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Lejtő - + Scale Méretezés - + Writing camera position Kamera helyzet írása - + Writing objects shown/hidden state Tárgy megjelenítés/elrejtés állapotának kiírása - + X factor X lépték - + Y factor Y lépték - + Z factor Z lépték - + Uniform scaling Egységes méretezés - + Working plane orientation Munka sík tájolás @@ -781,20 +816,25 @@ Kérjük, telepítse a dxf könyvtár kiegészítőt kézzel az Eszközök -> Kiegészítő kezelő menüből - + This Wire is already flat Ez a drót már lapos - + Pick from/to points Ettől/eddig pontok kiválasztása - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Lejtő a kiválasztott Drótvázakhoz/Vonalakhoz: 0 = vízszintes, 1 = 45fok felfelé, -1 = 45fok lefelé + + + Create a clone + Létrehoz egy klónt + DraftShapeStringGui @@ -846,28 +886,28 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Adjon meg koordinátákat vagy válasszon pontot az egérrel. Reset 3d point selection - Reset 3d point selection + 3d pont kiválasztás alaphelyzetbe állítása Reset Point - Reset Point + Pont visszaállítása Draft_AddConstruction - + Add to Construction group Építőipari csoporthoz adása - + Adds the selected objects to the Construction group A kijelölt objektumok felvétele az építési csoporthoz @@ -875,12 +915,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_AddPoint - + Add Point Pont hozzáadása - + Adds a point to an existing Wire or B-spline Egy pont hozzáadása egy meglévő dróthálóhoz vagy a B-görbéhez @@ -888,12 +928,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_AddToGroup - + Move to group... Áthelyezés csoportba... - + Moves the selected object(s) to an existing group Kijelölt objektum(ok) egy létező csoportba költöztetése @@ -901,12 +941,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_ApplyStyle - + Apply Current Style Aktuális stílus alkalmazása - + Applies current line width and color to selected objects A kijelölt objektumok aktuális vonal vastagságát és színét vonatkoztatja @@ -914,46 +954,46 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_Arc - + Arc Ív - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Ívet hoz létre középponttal és sugárral. CTRL az illesztéshez, SHIFT a kényszerítéshez Draft_ArcTools - + Arc tools - Arc tools + Körív eszközök Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Körív 3 pontból - + Creates an arc by 3 points - Creates an arc by 3 points + Körív létrehozása 3 pont alapján Draft_Array - + Array Sorba rendezés - + Creates a polar or rectangular array from a selected object Poláris vagy négyszögletes elrendezést hoz létre a kijelölt tárgyból @@ -961,12 +1001,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_AutoGroup - + AutoGroup Autocsoport - + Select a group to automatically add all Draft & Arch objects to Válasszon ki egy csoportot az összes Tervezet & Építészet objektum automatikus hozzáadásához @@ -974,12 +1014,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_BSpline - + B-spline B-görbe - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Több pontos B-görbe létrehozása. CTRL igazít, SHIFT kényszerítés @@ -987,12 +1027,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_BezCurve - + BezCurve BézGörbe - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain A Bezier-görbét hoz létre. CTRL az illesztéshez, SHIFT a korlátozáshoz @@ -1000,20 +1040,20 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_BezierTools - + Bezier tools - Bezier tools + Bezier-görbe eszközök Draft_Circle - + Circle Kör - + Creates a circle. CTRL to snap, ALT to select tangent objects Kör létrehozása. CTRL igazít, ALT érintő kiválasztása @@ -1021,12 +1061,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_Clone - + Clone Klónozás - + Clones the selected object(s) Kijelölt objektum(ok) klónozása @@ -1034,12 +1074,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_CloseLine - + Close Line Vonal lezárása - + Closes the line being drawn Rajzolt vonalsorozat lezárása @@ -1047,27 +1087,27 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + HarmadfokúBezGörbe - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Harmadfokú Bezier-görbe létrehozása +Vezérlőpont létrehozásához kattints és húzzd. CTRL: illesztés, SHIFT: kényszerítés Draft_DelPoint - + Remove Point Pont eltávolítása - + Removes a point from an existing Wire or B-spline Egy pontot vesz el egy meglévő dróthálótól vagy a B-görbétől @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimenzió - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Létrehoz egy dimenziót. CTRL igazít, SHIFT kényszerít, ALT szegmens kiválasztás @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Visszaminősít - + Explodes the selected objects into simpler objects, or subtracts faces A kijelölt objektumokat, egyszerűbb objektumokká robbantja szét, vagy kivon felületeket @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Tervrajzból vázlat - + Convert bidirectionally between Draft and Sketch objects Konvertálja kettős irányba a terv és a vázlat objektumokat @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Rajzolás - + Puts the selected objects on a Drawing sheet A kijelölt objektumokat helyez el egy rajz lapon @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Szerkesztés - + Edits the active object Az aktív objektum szerkesztése @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Javított szerkesztés - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Kijelölt objektum szerkesztése Draft_Ellipse - + Ellipse Ellipszis - + Creates an ellipse. CTRL to snap Ellipszis létrehozása. CTRL az illesztéshez @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Felületösszesítő - + Creates a facebinder object from selected face(s) Összesített felületű tárgyat képez a kiválasztott felület(ek)ből @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Vonal befejezése - + Finishes a line without closing it Befejez anélkül, hogy bezárná a vonalat @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Dimenziók megfordítása - + Flip the normal direction of a dimension A dimenzió irányának megfordítása @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Gyógyít - + Heal faulty Draft objects saved from an earlier FreeCAD version Hibás tervrajz objektumok gyógyítása egy korábbi mentett FreeCAD verziójából @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Csatlakoztatás - + Joins two wires together Két háló csatlakoztatása @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Címke - + Creates a label, optionally attached to a selected object or element Létrehoz egy címkét, tetszés szerint a kijelölt objektumhoz vagy elemhez csatolja + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Vonal - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 2 pontos vonal készítése. CTRL igazítás, SHIFT kényszerítés @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Tükrözés - + Mirrors the selected objects along a line defined by two points A kijelölt tárgyakat két pont által meghatározott vonal mentén tükrözi @@ -1275,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mozgat - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + A kijelölt objektum mozgatása két pont között. CTRL az illesztéshez, SHIFT a kényszerítéshez, ALT a másoláshoz Draft_Offset - + Offset Eltolás - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Az aktív objektum átméretezése. CTLR igazít, SHIFT kényszerít, ALT másol @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Út az Adatmezőhöz - + Creates copies of a selected object along a selected path. A kijelölt objektummal a kijelölt útvonalon másolatokat készít. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Pont - + Creates a point object Létrehoz egy pont objektumot @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Pont Tömb - + Creates copies of a selected object on the position of points. Másolatok készítése a kijelölt objektumokról a pontok helyén. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Sokszög - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Szabályos sokszög létrehozása. CTRL igazít, SHIFT korlátoz @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Téglalap - + Creates a 2-point rectangle. CTRL to snap Téglalap létrehozása 2 ponttal. CTRL igazít @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Forgatás - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Kijelölt objektumok forgatása. CTLR igazítás, SHIFT kényszerít, ALT másolatot készít @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Méretezés - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Méretezi a kiválasztott tárgyat egy alap ponttól. CTRL igazításhoz, SHIFT a kényszerít, ALT CTRL a másoláshoz @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Válassza ki a csoportot - + Selects all objects with the same parents as this group Kiválasztja az összes azonos szülőkkel rendelkező objektumot ebben a csoportban @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Sík kijelölés - + Select a working plane for geometry creation Válassz ki egy munkasíkot a geometria létrehozásához @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Egy proxy objektum létrehozása a jelenlegi munka síkból - + Create Working Plane Proxy Munka sík proxy létrehozása @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D alak nézet - + Creates Shape 2D views of selected objects A kijelölt tárgy 2D felület nézetét hozza létre @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Alakzat szöveg leírásból... - + Creates text string in shapes. Karakterláncot hoz létre az alakzatokban. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Illesztési sáv megjelenítése - + Shows Draft snap toolbar Tervrajz Illesztési pont eszköztár megjelenítése @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Lejtő beállítás - + Sets the slope of a selected Line or Wire Beállítja a kijelölt vonal lejtójét vagy dróthálóját @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Szögek - + Snaps to 45 and 90 degrees points on arcs and circles 45 és 90 fokos pontokat igazít az íveken és körökön @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Középre - + Snaps to center of circles and arcs Körök és Körívek középpontjához illeszti @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Méretek - + Shows temporary dimensions when snapping to Arch objects Ív tárgyhoz illesztésnél ideiglenesen mutatja a méreteket @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Végpont - + Snaps to endpoints of edges Illesztés az élek végpontjaihoz @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Meghosszabbítás - + Snaps to extension of edges Élek meghosszabbításához illesztés @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Rács - + Snaps to grid points Rácspontokhoz illesztés @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Metszet - + Snaps to edges intersections Éleket metszéséhez illesztés @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Illesztés Be/Ki kapcsolás - + Activates/deactivates all snap tools at once Egyszerre Be-/kikapcsolja az összes illesztő eszközt - + Lock Zárolás @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Felező - + Snaps to midpoints of edges Élek felezőpontjaihoz ilesztés @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Legközelebbi - + Snaps to nearest point on edges Élek legközelebbi pontjához illeszt @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Merőleges - + Snaps to orthogonal and 45 degrees directions Merőleges és 45 fokos irányú illesztés @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Párhuzamos - + Snaps to parallel directions of edges Illesztés az élek párhuzamos irányaiban @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Merőleges - + Snaps to perpendicular points on edges Illesztés az élek merőleges pontjaihoz @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Különleges - + Snaps to special locations of objects Hozzáilleszti az objektumok különleges helyeihez @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Munka sík - + Restricts the snapped point to the current working plane Korlátozza az illesztési pontokat a jelenlegi munka síkra @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Feloszt - + Splits a wire into two wires Háló két részre osztása @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Nyújtás - + Stretches the selected objects Kinyújtja a kiválasztott objektumokat @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Szöveg - + Creates an annotation. CTRL to snap Megjegyzés létrehozása. CTRL illeszt @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Váltás szerkezeti módra a következő objektumoknál. - + Toggle Construction Mode Építési mód váltása @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Folyamatos üzemmódra váltás - + Toggles the Continue Mode for next commands. A folyamat mód következő parancsra váltása. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Megjelenítési módra váltás - + Swaps display mode of selected objects between wireframe and flatlines Megjelenítési módot cserél a Drótvázas és a Sima vonalak között @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Rácsvonal kapcsolása - + Toggles the Draft grid on/off Tervrajz rácsát kapcsolja ki/be - + Grid Rács - + Toggles the Draft grid On/Off Tervrajz rács ki/be kapcsolása @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Levág-Bővít (trimex) - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts A kijelölt tárgyat levág és meghosszabbít vagy kihúz egy egyoldalú felületet. CTRL-al igazít, SHIFT-el korlátozza a választott szegmenshez vagy a normál állapothoz, ALT megfordít @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Utolsó szakasz visszavonása - + Undoes the last drawn segment of the line being drawn A vonal utolsó rajzolt szakaszának visszavonása @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Frissítés - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Összecsatolja a kijelölt tárgyakat, vagy összezárja a drótvázakat kitöltött felületekké, vagy egyesíti a felületeket - - Draft_VisGroup - - - VisGroup - LátCsoport - - - - Adds a VisGroup - LátCsoport hozzáadása - - Draft_Wire - - DWire - Terv-vonal + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Létrehoz egy több pontos vonalat (DWire). CTRL az igazításhoz, SHIFT a korlátozáshoz + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Drótháló a B-görbéhez - + Converts between Wire and B-spline Átváltás a drótháló és a B-görbe közt @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Általános Tervrajz beállítások - + This is the default color for objects being drawn while in construction mode. Ez az alapértelmezett színe a tárgyaknak, az építési módban. - + This is the default group name for construction geometry Ez az alapértelmezett csoport-név, az építési geometriánál - + Construction Építési @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainMentse az aktuális színt és vonalvastagságot erre a munkamenetre - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Ha ez be van jelölve, másolási üzemmódban marad az egész parancson keresztül, különben induláskor nem a másolási móddal fog indulni - + Global copy mode Globális másolási üzemmód - + Default working plane Alapértelmezett munkasík - + None Egyik sem - + XY (Top) XY (Felülről) - + XZ (Front) XZ (Elölről) - + YZ (Side) YZ (Oldalról) @@ -1988,12 +2023,12 @@ mint a " Arial: Dőlt " Általános beállítások - + Construction group name Konstrukció-csoport neve - + Tolerance Tűrés @@ -2018,22 +2053,22 @@ mint a " Arial: Dőlt " Itt lehet megadni egy SVG fájlokat tartalmazó könyvtár <pattern> meghatározásokat, melyet ki lehet egészíteni a standard-tervezet sraffozási mintákkal - + Draft interface mode Tervrajz interfész mód - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Ez az UI üzemmód, amelyben a tervrajz modul működik: Eszköztár mód helyére az összes tervrajz beállítás egy külön eszköztárba lesz téve, míg a tálca módot fogja használni a FreeCAD Tálcanézet rendszer minden felhasználói beavatkozáshoz - + Toolbar Eszköztár - + Taskview Tárgynézet @@ -2063,12 +2098,12 @@ mint a " Arial: Dőlt " Alt mód - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Tárgy másolása után, normális, ha a másolat van kiválasztva. Ha ez az opció nincs kiválasztva, akkor az alap tárgy lesz kiválasztva. - + Select base objects after copying Válassza ki a bázis objektumokat másolás után @@ -2103,7 +2138,7 @@ mint a " Arial: Dőlt " A fő vonalak vastagabb rajzolatúak. Adja meg, mennyi négyzet legyen a fővonalak közt. - + Internal precision level Belső pontossági szint @@ -2218,12 +2253,12 @@ mint a " Arial: Dőlt " Fehér vonal szín feketére váltása - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Ha bejelölt, A Tervezet eszközök Alkatrész primitíveket hoz létre a Tervezet tárgyak helyett, ha elérhető. - + Use Part Primitives when available Ha elérhető kiinduló alkatrészeket használ @@ -2243,12 +2278,7 @@ mint a " Arial: Dőlt " Mindig illeszt (kiiktatja az illesztési módot) - - Construction geometry - Építőipari geometria - - - + Construction geometry color Építési geometria színe @@ -2388,7 +2418,7 @@ mint a " Arial: Dőlt " Válasszon ki egy betűtípus fájlt - + Fill objects with faces whenever possible Töltse ki a tárgyakat felületekkel amikor csak lehetséges @@ -2678,7 +2708,7 @@ mint a " Arial: Dőlt " Automatikus frissítés (csak az örökölt importálása) - + Prefix labels of Clones with: Klónozás ezzel előtag címkék: @@ -2717,7 +2747,7 @@ Pl: a fájl milliméterben: 1, a centiméterben: 10, méterben: 1000, inches: 25 Ez a kiválasztott SVG objektum szín importálás módja a FreeCAD rendszerbe. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Ha ez be van jelölve, tárgyak alap esetben kitöltöttként jelennek meg. Ellenkező esetben, ezek drótvázként jelennek meg @@ -2797,17 +2827,7 @@ Pl: a fájl milliméterben: 1, a centiméterben: 10, méterben: 1000, inches: 25 Ha ez be van jelölve, az azonos rétegeken lévő tárgyakat összeköti tervrajz blokká, gyorsabb kijelzéshez, de így nehezebben szerkeszthető - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Kijelölés esetén az utasítás lépések a Kimeneti Ablakban megjelennek a Vázlat parancsok futtatásakor - - - - Verbose command line mode - Beszédes parancssori mód - - - + When drawing lines, set focus on Length instead of X coordinate Amikor vonalakat rajzol, a fókuszt a hosszra helyezi az X koordináta helyett @@ -2887,709 +2907,857 @@ Pl: a fájl milliméterben: 1, a centiméterben: 10, méterben: 1000, inches: 25 Max görbületi szegmens: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Tizedesek száma a belső koordinátás műveletekhez (pl. 3 = 0.001). A 6 és 8 közötti értékeket általában a FreeCAD használói között a legjobban elterjedtek. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Ez a tűréshatárt használó függvények által használt érték. +A fenti értéknél kisebb különbségű értékeket azonos értékekként fogja kezelni. Ez az érték hamarosan elavulnak, így a pontossági szint mindkettőt felülértékeli. Use legacy python exporter - Use legacy python exporter + Használj örökölt python exportálót + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Építési geometria + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relatív + + + + R + R + + + + Continue + Tovább + + + + T + T + + + + Close + Bezárás + + + + O + O + + + + Copy + Másolás + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Kitöltés + + + + L + L + + + + Exit + Kilépés + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Hossz + + + + H + H + + + + Wipe + Radíroz + + + + W + W + + + + Set WP + WP beállítás + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + X korlátozása + + + + X + X + + + + Restrict Y + Y korlátozása + + + + Y + Y + + + + Restrict Z + Z korlátozása + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Tervrajz ilesztés - - - Draft creation tools - Tervezési létrehozó eszközök - - - - Draft modification tools - Tervezési módosítási eszközök - - - - Utilities - Kiegészítők - - - - Wire tools - Vonal eszköztár - - - - Snapping - Illesztés - draft - + not shape found nem található alakzat - + All Shapes must be co-planar Minden alakzatnak azonos síkban kell lennie - + The given object is not planar and cannot be converted into a sketch. Az adott objektum nem sík és nem lehet átalakítani vázlattá. - + Unable to guess the normal direction of this object Nem tudja meghatározni ennek az objektumnak a normális irányát - + Draft Command Bar Tervezet parancssor - + Toggle construction mode Építési mód váltása - + Current line color Aktuális vonal szín - + Current face color Aktuális felület szín - + Current line width Aktuális vonalvastagság - + Current font size Aktuális betűméret - + Apply to selected objects Alkalmazza a kijelölt objektumokon - + Autogroup off Autócsoport kikapcsolása - + active command: aktív parancs: - + None Egyik sem - + Active Draft command Aktív tervezési parancs - + X coordinate of next point Következő pont X koordinátája - + X X - + Y Y - + Z Z - + Y coordinate of next point Következő pont Y koordinátája - + Z coordinate of next point Következő pont Z koordinátája - + Enter point Pont megadása - + Enter a new point with the given coordinates Adjon meg egy új pontot a megadott koordinátákkal - + Length Hossz - + Angle Szög - + Length of current segment Aktuális szakasz hossza - + Angle of current segment Aktuális szakasz szöge - + Radius Sugár - + Radius of Circle A kör sugara - + If checked, command will not finish until you press the command button again Ha be van jelölve, a parancs nem fejeződik be, amíg újra meg nem nyomja a parancs gombot - + If checked, an OCC-style offset will be performed instead of the classic offset Ha kijelölt, egy OCC-stílusú eltolás lesz végrehajtva a klasszikus eltolás helyett - + &OCC-style offset OCC-stílusú eltolás - + Add points to the current object Pontot ad az aktuális objektumhoz - + Remove points from the current object A meglévő objektumból kiveszi a pontokat - + Make Bezier node sharp Bézier csomókat élcsomókká alakít - + Make Bezier node tangent Bezier-csomópontot érintővé alakít - + Make Bezier node symmetric Bézier-csomópontot szimmetrikussá alakít - + Sides Oldalak - + Number of sides Oldalak száma - + Offset Eltolás - + XY (top) XY (felülről) - - Select XY plane - XY sík kiválasztása - - - + XZ (front) XZ (előlről) - - Select XZ plane - XZ sík kiválasztása - - - + YZ (side) YZ (oldalról) - - Select YZ plane - YZ sík kiválasztása - - - + View Nézet - - Select plane perpendicular to the current view - Aktuális nézetre merőleges sík kiválasztása - - - + Auto Automatikus - - Do not project points to a drawing plane - Ne vetíts pontot a rajz síkra - - - + Text string to draw Szöveges karakterlánc rajzolás - + String Karakterlánc - + Height of text Szöveg magassága - + Height Magasság - + Intercharacter spacing Karakteren belüli távolság - + Tracking Léptetés - + Full path to font file: Betűtípus fájl teljes elérési útja: - + Open a FileChooser for font file Nyissa meg a FájlKiválasztót a betűtípus fájlhoz - + Grid spacing Rács térköze - + The spacing between the grid lines A rács vonalai közötti térköz - + Main line every Fő vonal minden - + The number of lines between main lines Fő vonalak közt lévő vonalak száma - + Center plane on view Sík központ a nézeten - - Select Plane - Jelölje ki a síkot - - - + Line Vonal - + DWire Terv-vonal - + Circle Kör - + Center X Közép X - + Arc Ív - + Point Pont - + Label Címke - + Distance Távolság - + Trim Vágás - + Pick Object Objektum kiválasztás - + Edit Szerkesztés - + Global X Globális X - + Global Y Globális Y - + Global Z Globális Z - + Local X Helyi X - + Local Y Helyi Y - + Local Z Helyi Z - + Invalid Size value. Using 200.0. Érvénytelen méret érték. Használja 200.0. - + Invalid Tracking value. Using 0. Léptetés értéke érvénytelen. Használja 0. - + Please enter a text string. Adjon meg egy szöveges karakterláncot. - + Select a Font file Válasszon ki egy betűtípus fájlt - + Please enter a font file. Kérjük, írja be a betűtípus fájlt. - + Autogroup: Autogroup: - + Faces Felületek - + Remove Törlés - + Add Hozzáad - + Facebinder elements Felülettároló elemek - + Create Line Vonal létrehozása - - Pick next point: - - Következő pont kiválasztása: - - - + Convert to Wire Dróthálóvá alakítja - + BSpline Folyamatos ív - + BezCurve BézGörbe - + Create BezCurve BézGörbe létrehozása - + Rectangle Téglalap - + Create Plane Sík létrehozása - + Create Rectangle Téglalap rajzolása - + Create Circle Kör rajzolása - + Create Arc Ív létrehozása - + Start Angle Kezdő nézet - + Aperture Nyílás - + Polygon Sokszög - + Create Polygon Polygon létrehozása - + Ellipse Ellipszis - + Create Ellipse Ellipszis létrehozása - + Text Szöveg - + Create Text Szöveg létrehozása - + Dimension Dimenzió - + Create Dimension Méretek létrehozása - + ShapeString AlakzatSzövegből - + Create ShapeString AlakzatSzövegből létrehozása - + Copy Másolás - + Move Mozgat - + Change Style Stílus váltás - + Rotate Forgatás - - Cannot offset this object type - - Ezt az objektum típust nem képes eltolni - - - + Stretch Nyújtás - + Upgrade Frissítés - + Downgrade Visszaminősít - + Selection is not a Knot A kiválasztás nem egy csomó - + Convert to Sketch Alakítsa vázlattá - + Convert to Draft Tervrajzzá alakít - + Convert Átalakítás - + Array Sorba rendezés - + Create Point Pont létrehozása - + Mirror Tükrözés - + &Draft Tervrajz @@ -3613,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. - + Draft.makeBSpline: not enough points Draft.makeBSpline: nincs elég pont - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Azonos végpontok összezárásának eröltetése - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Érvénytelen pontlista - + No object given Nincs megadott tárgy - + The two points are coincident A két pont egybeesik - + Found groups: closing each open object inside Csoportokat talált: minden belső nyitott objektum bezárása - + Found mesh(es): turning into Part shapes Háló(ka)t találtam: Alkatrészekké alakít - + Found 1 solidifiable object: solidifying it Egy kialakítható tárgy található: megszilárdítjuk, felületet képzünk - + Found 2 objects: fusing them Két objektum található: egybeolvaszt - + Found several objects: creating a shell Több objektumot talált: létrehoz egy héjat - + Found several coplanar objects or faces: creating one face Találtam több egy síkban fekvő tárgyat vagy felületet: létrehoz egy felületet - + Found 1 non-parametric objects: draftifying it Találtunk 1 nem parametrikus objektumok: tervrajzzá alakít - + Found 1 closed sketch object: creating a face from it 1 zárt vázlat tárgyat talált: létrehoz belőle egy felületet - + Found 1 linear object: converting to line 1 lineáris tárgyat talált: átalakítja egyenessé - + Found closed wires: creating faces Zárt drótvázat talált: létrehoz felületeket - + Found 1 open wire: closing it 1 nyílt szakaszt talált: bezárja - + Found several open wires: joining them Találtam több nyitott vonalat: csatlakoztatom - + Found several edges: wiring them Több élt talált: összeköti őket - + Found several non-treatable objects: creating compound Találtam több nem kezelhető tárgyat: létrehoz egyesítést - + Unable to upgrade these objects. Nem lehet frissíteni ezeket a tárgyakat. - + Found 1 block: exploding it Találtam 1 blokkot: szétrobbantom - + Found 1 multi-solids compound: exploding it Találtam 1 összetett multi-szilárd testet: robbantom - + Found 1 parametric object: breaking its dependencies Találtunk 1 parametrikus objektumot: függőségeket felosztja - + Found 2 objects: subtracting them Két objektum találat: kivonja egymásból - + Found several faces: splitting them Több felület találat: felosztja - + Found several objects: subtracting them from the first one Több objektum találat: kivonja az elsőből - + Found 1 face: extracting its wires Találtunk 1 felületet: vonalakra bontja - + Found only wires: extracting their edges Csak vonalak találhatók: éleiket kibontja - + No more downgrade possible Nem lehet több visszaminősítést végezni - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Ugyanazzal az első/utolsó ponttal bezárva. Geometria nem frissül. - + No point found Nem található pont - + ShapeString: string has no wires ShapeString: karakterláncnak nincs drótváza - + Relative Relatív - + Continue Tovább - + Close Bezárás @@ -3830,7 +3998,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Z korlátozása - + Select edge Válassza ki az élt @@ -3845,7 +4013,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Hosszanti mód - + Wipe Radíroz @@ -3860,513 +4028,636 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Illesztés objektumok váltogatása - + Check this to lock the current angle Jelölje be az aktuális szög lezárásához - + Coordinates relative to last point or absolute Előző ponthoz viszonyított vagy abszolút koordináták - + Filled Kitöltött - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Jelölje be ezt, ha a tárgyat kitöltve szeretné megjeleníteni, különben drótvázként jelenik meg - - - + Finish Befejezés - + Finishes the current drawing or editing operation Befejezi az aktuális rajz vagy szerkesztési műveletet - + &Undo (CTRL+Z) Visszavonás (CTRL + Z) - + Undo the last segment Utolsó szegmens visszavonása - + Finishes and closes the current line A folyamatban lévő vonal befejezése és lezárása - + Wipes the existing segments of this line and starts again from the last point Kiradírozza a meglévő szegmenst ebből a vonalból és ismét az utolsó ponttól kezdi - + Set WP WP beállítás - + Reorients the working plane on the last segment A munkasíkot átállítja az utolsó szegmensen - + Selects an existing edge to be measured by this dimension Ezzel a mérettel történő méréshez válasszon ki egy létező élt - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Ha ki van jelölve, az objektumok másolva lesznek mozgatás helyett. A Beállítások -> Vázlat -> Globális másolás mód a későbbi parancsok esetén - - options - beállítások - - - + Default Alapértelmezett - + Pick a face to define the drawing plane Felület megadása, amely meghatározza a rajz síkját - - First point: - Első pont: - - - - Closing - Bezárja - - - + Create Wire Drótváz létrehozása - - Removing last point - Utolsó pontot eltávolítja - - - - Next point: - Következő pont: - - - - Restarting from - Újraindítás innen - - - + Unable to create a Wire from selected objects Nem sikerült létrehozni egy dróthálót a kijelölt objektumokból - + Spline has been closed Görbe lezárva - + Last point has been removed Utolsó pont eltávolítva - - Pick next point, or Finish (shift-F) or close (o): - Válasszon következő pontot, vagy fejezze be (shift-F) vagy zárja (o): - - - + Create B-spline B-görbe létrehozása - + Bezier curve has been closed Bezier-görbe lezárásra került - - Pick first point: - Válassza ki az első pontot: - - - - Pick opposite point: - Ellenkező pontot kiválasztása: - - - - Pick center point: - Középpont kijelölése: - - - - Pick radius: - Sugár megadása: - - - - Pick start angle: - Kezdő fok megadása: - - - - Pick aperture: - Nyílás kiválasztás: - - - - Aperture angle: - Nyílás szöge: - - - - Pick location point: - Helyzet pont megadása: - - - + Edges don't intersect! Élek nem metszik egymást! - + Pick ShapeString location point: Válasszon AlakzatSzövegből elhelyezési pontot: - + Select an object to move Objektum kijelölése mozgatáshoz - - Pick start point: - Kiinduló pont megadása: - - - - Pick end point: - Végpont megadása: - - - + Select an object to rotate Jelöljön ki egy objektumot elforgatáshoz - - Pick rotation center: - Elforgatás középpont (tengely) megadás: - - - - Pick base angle: - Alap szög megadása: - - - - Pick rotation angle: - Elforgatási szög megadása: - - - + Select an object to offset Egy tárgy kijelölése az eltoláshoz - + Offset only works on one object at a time Egyszerre csak egy tárgyon működik az eltolás - + Sorry, offset of Bezier curves is currently still not supported Elnézést, a Bézier görbe eltolás jelenleg még nem támogatott - - Pick distance: - Adja meg a távolságot: - - - + Select an object to stretch Jelöljön ki egy objektumot a nyújtáshoz - - Pick first point of selection rectangle: - Válassza ki az első pontot a téglalap kijelölésén: - - - - Pick opposite point of selection rectangle: - Válassza ki a második pontot a téglalap kijelölésén: - - - - Pick start point of displacement: - Elmozdulás kezdőpontjának kiválasztása: - - - - Pick end point of displacement: - Elmozdulás végpontjának kiválasztása: - - - + Turning one Rectangle into a Wire Egy téglalap átalakítása drótvázzá - + Select an object to join Objektum kijelölése csatalkoztatáshoz - + Join Csatlakoztatás - + Select an object to split Objektum kijelölése felosztáshoz - + Select an object to upgrade Jelöljön ki egy objektumot a frissítéshez - + Select object(s) to trim/extend Válassza ki a tárgya(ka)t a vágáshoz/kiterjesztéshez - + Unable to trim these objects, only Draft wires and arcs are supported Nem lehet vágni a tárgyakat, csak Tervrajz vonalak és ívek támogatottak - + Unable to trim these objects, too many wires Nem lehet ezeket a tárgyakat vágni, túl sok drótváz - + These objects don't intersect Ezek az objektumok nem metszik egymást - + Too many intersection points Túl sok kereszteződési pont - + Select an object to scale Objektum kijelölése a méretezéshez - - Pick base point: - Bázis pont kiválasztása: - - - - Pick reference distance from base point: - Válassza ki a referencia távolságot az alap pontból: - - - - Pick new distance from base point: - Válassza ki az új referencia távolságot az alap pontból: - - - + Select an object to project Jelöljön ki egy objektumot a vetítéshez - - This object type is not editable - Ehhez az objektumtípus nem szerkezthető - - - + Please select only one object Kérem csak egy objektumot válasszon - + Select a Draft object to edit Szerkesztéshez Tervrajz tárgyat választ - + Active object must have more than two points/nodes Aktív objektumnak kettőnél több pontot/csomópontot kell tartalmaznia - + Endpoint of BezCurve can't be smoothed BézGörbe végpontját nem lehet elsimítani - + Select an object to convert Jelöljön ki egy konvertálandó tárgyat - + Select an object to array Jelöljön ki egy objektumot, a sorba rendezéshez - + Please select base and path objects Kérem válassza ki az alap és az útvonal tárgyakat - + Please select base and pointlist objects Kérem válasszon alap és pontlista objektumokat - + Select an object to clone Jelöljön ki egy tárgyat a klónozáshoz - + Select face(s) on existing object(s) Válassza ki a meglévő objektum(ok) felülete(i)t - + Select an object to mirror Elem kiválasztása tükrözéshez - - Pick start point of mirror line: - Tükrözési tengely kezdőpontja: - - - - Pick end point of mirror line: - Tükrözési tengely végpontja: - - - + This tool only works with Wires and Lines Ez az eszköz csak Dróthálókkal vagy Egyenesekkel működik - - - Pick target point: - Válassza ki a cél pontot: - - - - Pick endpoint of leader line: - Válassza ki a vezető vonal végpontját: - - - - Pick text position: - Válassza ki a szöveg helyzetét: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (korábban Teigha) fájl konverter nem található, DWG támogatás le van tiltva - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s megosztja az alappontot %d másik objektummal. Kérem ellenőrizze, ha módosítani szeretné ezt. Subelement mode - Subelement mode + Alelem mód - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Sugár-és szögívek szerkesztésének ki-és bekapcsolása - + Modify subelements - Modify subelements + Alelemek módosítása - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Ha be van jelölve, az al-elemek lesznek módosítva a teljes tárgy helyett - + CubicBezCurve - CubicBezCurve + HarmadfokúBezGörbe - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Egyes al elemeket nem lehet mozgatni. - + Scale Méretezés - + Some subelements could not be scaled. - Some subelements could not be scaled. + Egyes al elemeket nem lehet léptékezni. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + Fal alap vázlatát túl bonyolult szerkeszteni: javasol, hogy közvetlenül szerkessze a vázlatot + + + + Top + Felülnézet + + + + Front + Elölnézet + + + + Side + Oldal + + + + Current working plane + Jelenlegi munka sík + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatikus + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Forgatás + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Jelöljön ki egy objektumot a szerkeztéshez + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Tervrajz + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Kiegészítők + + + + Wire tools + Vonal eszköztár + + + + Snapping + Illesztés diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm index ee0a944e66..5fc581a6d4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index 492259a517..207d62badb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Mendefinisikan pola penetasan - + Sets the size of the pattern Menyetel ukuran pola - + Startpoint of dimension Dimensi Startpoint - + Endpoint of dimension Dimensi Endpoint - + Point through which the dimension line passes Titik mana lewat jalur dimensi - + The object measured by this dimension Objek yang diukur dengan dimensi ini - + The geometry this dimension is linked to Geometri dimensi ini terkait dengan - + The measurement of this dimension Pengukuran dimensi ini - + For arc/circle measurements, false = radius, true = diameter Untuk pengukuran busur lingkaran, palsu = radius, benar = diameter - + Font size Ukuran huruf - + The number of decimals to show Jumlah desimal untuk menunjukkan - + Arrow size Panah ukuran - + The spacing between the text and the dimension line Jarak antara teks dan garis dimensi - + Arrow type Jenis Panah - + Font name Nama font - + Line width Lebar garis - + Line color Line warna - + Length of the extension lines Panjang baris ekstensi - + Rotate the dimension arrows 180 degrees Memutar panah dimensi 180 derajat - + Rotate the dimension text 180 degrees Putar teks dimensi 180 derajat - + Show the unit suffix Tampilkan akhiran unit - + The position of the text. Leave (0,0,0) for automatic position Posisi teks. Tinggalkan (0,0,0) untuk posisi otomatis - + Text override. Use $dim to insert the dimension length Menimpa teks. Gunakan $dim untuk memasukkan dimensi panjang - + A unit to express the measurement. Leave blank for system default Sebuah unit untuk mengekspresikan pengukuran. Biarkan kosong untuk sistem default - + Start angle of the dimension Mulai sudut dimensi - + End angle of the dimension Akhir sudut dimensi - + The center point of this dimension Titik pusat dari dimensi ini - + The normal direction of this dimension Arah yang normal dimensi ini - + Text override. Use 'dim' to insert the dimension length Menimpa teks. Gunakan 'redup' untuk memasukkan dimensi panjang - + Length of the rectangle Panjang persegi panjang - + Radius to use to fillet the corners Radius menggunakan untuk fillet sudut - + Size of the chamfer to give to the corners Ukuran Talang untuk memberikan sudut - + Create a face Menciptakan wajah - + Defines a texture image (overrides hatch patterns) Mendefinisikan sebuah gambar tekstur (mengabaikan menetas pola) - + Start angle of the arc Mulai sudut busur - + End angle of the arc (for a full circle, give it same value as First Angle) Akhir sudut dari busur (untuk lingkaran penuh, memberikan sama nilai sebagai sudut pertama) - + Radius of the circle Jari-jari lingkaran - + The minor radius of the ellipse Jari-jari kecil ellipse - + The major radius of the ellipse Radius utama dari ellipse - + The vertices of the wire Vertex kawat - + If the wire is closed or not Jika kawat tertutup atau tidak - + The start point of this line Titik awal dari jalur ini - + The end point of this line Titik akhir dari jalur ini - + The length of this line Panjang baris ini - + Create a face if this object is closed Menciptakan wajah jika objek ini ditutup - + The number of subdivisions of each edge Jumlah subdivisi dari tepi masing-masing - + Number of faces Jumlah wajah - + Radius of the control circle Jari-jari lingkaran kontrol - + How the polygon must be drawn from the control circle Bagaimana poligon harus ditarik dari lingkaran kontrol - + Projection direction Proyeksi arah - + The width of the lines inside this object Lebar garis dalam objek ini - + The size of the texts inside this object Ukuran teks didalam objek ini - + The spacing between lines of text Jarak antara baris teks - + The color of the projected objects Warna benda yang diproyeksikan - + The linked object Objek terkait - + Shape Fill Style Bentuk Isi Style - + Line Style Gaya baris - + If checked, source objects are displayed regardless of being visible in the 3D model Kalau dicentang, sumber objek ditampilkan tanpa memperhatikan untuk menjadi tampil dalam model 3D - + Create a face if this spline is closed Menciptakan wajah jika spline ini ditutup - + Parameterization factor Demikian faktor - + The points of the Bezier curve Titik kurva Bezier - + The degree of the Bezier function Tingkat fungsi Bezier - + Continuity Lanjutkan - + If the Bezier curve should be closed or not Jika kurva Bezier harus tertutup atau tidak - + Create a face if this curve is closed Menciptakan wajah jika spline ini ditutup - + The components of this block Komponen dari jendela ini - + The base object this 2D view must represent Objek dasar harus mewakili pandangan ini 2D - + The projection vector of this object Vektor proyeksi objek ini - + The way the viewed object must be projected Cara objek dilihat harus diproyeksikan - + The indices of the faces to be projected in Individual Faces mode Indeks yang wajah-wajah ke dalam individu wajah mode - + Show hidden lines Tampilkan garis tersembunyi - + The base object that must be duplicated Objek dasar yang harus digandakan - + The type of array to create Jenis array untuk membuat - + The axis direction Arah sumbu - + Number of copies in X direction Jumlah salinan di X arah - + Number of copies in Y direction Jumlah salinan arah Y - + Number of copies in Z direction Jumlah salinan arah Z - + Number of copies Jumlah salinan - + Distance and orientation of intervals in X direction Jarak dan orientasi interval di X arah - + Distance and orientation of intervals in Y direction Jarak dan orientasi interval arah Y - + Distance and orientation of intervals in Z direction Jarak dan orientasi interval dalam arah Z - + Distance and orientation of intervals in Axis direction Jarak dan orientasi interval dalam arah Axis - + Center point Pusat titik - + Angle to cover with copies Angle untuk menutupi dengan salinan - + Specifies if copies must be fused (slower) Menentukan apakah salinan harus menyatu (lebih lambat) - + The path object along which to distribute objects The path objek bersama yang untuk mendistribusikan benda - + Selected subobjects (edges) of PathObj Subobject (tepi) yang dipilih dari PathObj - + Optional translation vector Vektor terjemahan pilihan - + Orientation of Base along path Orientasi Basis sepanjang jalan - + X Location X Lokasi - + Y Location Lokasi y - + Z Location Z Location - + Text string String teks - + Font file name Nama file font - + Height of text Tinggi teks - + Inter-character spacing Jarak antar karakter - + Linked faces Wajah yang tertaut - + Specifies if splitter lines must be removed Menentukan apakah garis membagi harus dilepas - + An optional extrusion value to be applied to all faces Nilai ekstrusi opsional untuk diterapkan ke semua wajah - + Height of the rectangle Tinggi pesrsegi panjang - + Horizontal subdivisions of this rectangle Subdivisi horizantal dari persegi panjang ini - + Vertical subdivisions of this rectangle Subdivisi vertikal dari persegi panjang ini - + The placement of this object Penempatan objek ini - + The display length of this section plane Panjang tampilan bidang bagian ini - + The size of the arrows of this section plane Ukuran panah bidang bagian ini - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Untuk mode Cutlines and Cutfaces, daun ini menghadap ke lokasi yang dipotong - + The base object is the wire, it's formed from 2 objects Objek dasarnya adalah kawat , itu terbentuk dari 2 benda - + The tool object is the wire, it's formed from 2 objects Objek alat adalah kawat, itu terbentuk dari 2 benda - + The length of the straight segment Panjang segmen lurus - + The point indicated by this label The titik yang ditunjukkan oleh ini label - + The points defining the label polyline Poin yang menentukan label polyline - + The direction of the straight segment Arah segmen lurus - + The type of information shown by this label Jenis informasi yang ditunjukkan oleh label ini - + The target object of this label Tujuan dari label ini - + The text to display when type is set to custom Teks yang akan ditampilkan saat tipe diatur ke custom - + The text displayed by this label Teks yang ditampilkan oleh label ini - + The size of the text Ukuran teksnya - + The font of the text Huruf teks - + The size of the arrow Ukuran panah - + The vertical alignment of the text Penyelarasan vertikal teks - + The type of arrow of this label Jenis panah dari label ini - + The type of frame around the text of this object Jenis bingkai di sekitar teks objek ini - + Text color Text color - + The maximum number of characters on each line of the text box Jumlah maksimum karakter di setiap baris dalam kotak teks - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Base - + PointList PointList - + Count Menghitung - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Kemiringan - + Scale Skala - + Writing camera position Menulis posisi kamera - + Writing objects shown/hidden state Menulis benda yang ditampilkan / tersembunyi - + X factor Faktor X - + Y factor Faktor Y - + Z factor Z faktor - + Uniform scaling Seragam penskalaan - + Working plane orientation Orientasi bidang kerja @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager Download perpustakaan dxf gagal Silahkan install addon perpustakaan dxf secara manual dari menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Buat tiruan + DraftShapeStringGui @@ -860,12 +900,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Add Point - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Pindah ke grup... - + Moves the selected object(s) to an existing group Memindahkan objek yang dipilih ke grup yang ada @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Terapkan Gaya Ini - + Applies current line width and color to selected objects Terapkan lebar garis dan warna ini untuk objek yang dipilih @@ -912,12 +952,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Busur - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -925,7 +965,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -933,12 +973,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -946,12 +986,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Array - + Creates a polar or rectangular array from a selected object Menciptakan susunan melingkar atau persegi panjang dari obyek yang dipilih @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Pilih grup untuk secara otomatis menambahkan semua Draft & Arch objek untuk @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Menciptakan kurva Bezier. CTRL untuk snap, SHIFT untuk membatasi @@ -998,7 +1038,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1006,12 +1046,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Lingkaran - + Creates a circle. CTRL to snap, ALT to select tangent objects Menciptakan sebuah lingkaran. CTRL untuk snap, ALT untuk memilih objek singgung @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Klon - + Clones the selected object(s) Klon obyek yang dipilih @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Tutup Garis - + Closes the line being drawn Menutup garis yang ditarik @@ -1045,12 +1085,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1060,12 +1100,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Menghapus Titik - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensi - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Menciptakan sebuah dimensi. CTRL untuk snap, pergeseran untuk membatasi, ALT untuk memilih segmen @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Kelas bawah - + Explodes the selected objects into simpler objects, or subtracts faces Explodes objek yang dipilih menjadi objek yang lebih sederhana, atau kurangi wajah @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draf untuk Sketsa - + Convert bidirectionally between Draft and Sketch objects Mengkonversi bidirectionally antara Draft dan Sketch objek @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Gambar - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Edit - + Edits the active object Mengedit objek yang aktif @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Elips - + Creates an ellipse. CTRL to snap Membuat elips CTRL untuk snap @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Pengikat wajah - + Creates a facebinder object from selected face(s) Membuat objek facebinder dari wajah yang dipilih @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Garis Akhir - + Finishes a line without closing it Mengakhiri garis tanpa menutupnya @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Balikkan arah normal dari dimensi @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Menyembuhkan - + Heal faulty Draft objects saved from an earlier FreeCAD version Sembuhkan benda-benda Rusak yang salah yang disimpan dari versi FreeCAD sebelumnya @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Membuat label, secara opsional terikat pada objek atau elemen yang dipilih + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Garis - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Membuat garis 2 titik. CTRL untuk sejajarkan. SHIFT untuk mengekang @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Cermin - + Mirrors the selected objects along a line defined by two points Cermin objek yang dipilih sepanjang garis yang didefinisikan oleh dua titik @@ -1273,12 +1321,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Pindah - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1286,12 +1334,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Mengimbangi - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Nonaktifkan objek aktif. CTRL untuk snap, SHIFT untuk membatasi, ALT untuk menyalin @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Membuat salinan dari objek yang dipilih di sepanjang jalur yang dipilih. @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Titik - + Creates a point object Membuat objek titik @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Poligon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Membuat poligon biasa. CTRL untuk snap, SHIFT untuk membatasi @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Empat persegi panjang - + Creates a 2-point rectangle. CTRL to snap Membuat persegi panjang 2 titik. CTRL untuk snap @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Memutar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Memutar objek yang dipilih. CTRL untuk snap, SHIFT untuk membatasi, ALT membuat salinan @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Tentukan objek yang dipilih dari titik dasar. CTRL untuk snap, SHIFT untuk membatasi, ALT untuk menyalin @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Pilih grup - + Selects all objects with the same parents as this group Memilih semua objek dengan orang tua yang sama dengan grup ini @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Pilih Pesawat - + Select a working plane for geometry creation Pilih bidang kerja untuk pembuatan geometri @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Membuat objek proxy dari pesawat kerja saat ini - + Create Working Plane Proxy Create Working Plane Proxy @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Bentuk tampilan 2D - + Creates Shape 2D views of selected objects Menciptakan Bentuk 2D dilihat dari objek yang dipilih @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Bentuk dari teks... - + Creates text string in shapes. Membuat string teks dalam bentuk. @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Tampilkan Snap Bar - + Shows Draft snap toolbar Menunjukkan draf toolbar snap @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Sudut - + Snaps to 45 and 90 degrees points on arcs and circles Jepret ke 45 dan 90 derajat poin pada busur dan lingkaran @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Pusat - + Snaps to center of circles and arcs Jepret ke tengah lingkaran dan busur @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Ukuran - + Shows temporary dimensions when snapping to Arch objects Menunjukkan dimensi sementara saat membuka objek Arch @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Titik akhir - + Snaps to endpoints of edges Jepret ke titik akhir tepi @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Perpanjangan - + Snaps to extension of edges Jepret ke ekstensi tepi @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Kisi - + Snaps to grid points Bentak untuk grid poin @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Persimpangan - + Snaps to edges intersections Jepret ke tepi persimpangan @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Toggle On / Off - + Activates/deactivates all snap tools at once Mengaktifkan / menonaktifkan semua alat snap sekaligus - + Lock Mengunci @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Titik tengah - + Snaps to midpoints of edges Jepret ke titik tengah tepi @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Terdekat - + Snaps to nearest point on edges Jepret ke titik terdekat di tepinya @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Jepret ke arah ortogonal dan 45 derajat @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralel - + Snaps to parallel directions of edges Jepret ke arah tepi yang sejajar @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Tegak lurus - + Snaps to perpendicular points on edges Jepret ke titik tegak lurus di tepinya @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Jepret ke lokasi khusus objek @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Pesawat Kerja - + Restricts the snapped point to the current working plane Batasi titik bentak ke bidang kerja saat ini @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Peregangan objek yang dipilih @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Teks - + Creates an annotation. CTRL to snap Membuat anotasi. CTRL untuk snap @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Toggles the Construction Mode untuk objek berikutnya. - + Toggle Construction Mode Toggle Construction Mode @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode untuk perintah berikutnya. @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Toggle mode tampilan - + Swaps display mode of selected objects between wireframe and flatlines Swap menampilkan mode objek yang dipilih antara wireframe dan flatlines @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Toggle Grid - + Toggles the Draft grid on/off Mengaktifkan / menonaktifkan kisi grid - + Grid Kisi - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Potong atau rentangkan objek yang dipilih, atau ekstrusi wajah tunggal. CTRL terkunci, SHIFT membatasi segmen saat ini atau normal, pembalikan ALT @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Urungkan segmen terakhir - + Undoes the last drawn segment of the line being drawn Membatalkan ditarik terakhir segmen dari garis yang ditarik @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Meningkatkan - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Bergabung dengan benda yang dipilih menjadi satu, atau ubah kabel yang tertutup ke wajah yang terisi, atau satukan wajah - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Menambahkan VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Membuat DraftWire beberapa titik ( DWire). CTRL untuk snap, SHIFT untuk membatasi + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Pengaturan Umum Rancang - + This is the default color for objects being drawn while in construction mode. Ini adalah warna default untuk objek yang ditarik saat berada dalam mode konstruksi. - + This is the default group name for construction geometry Ini adalah nama grup default untuk geometri konstruksi - + Construction Konstruksi @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSimpan warna dan linewidth saat ini di seluruh sesi - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Jika ini dicentang, mode copy akan disimpan di seluruh perintah, jika tidak, perintah akan selalu dimulai dalam mode tanpa salinan - + Global copy mode Mode penyalinan global - + Default working plane Pesawat kerja standar - + None Tidak ada - + XY (Top) XY (Atas) - + XZ (Front) XZ (Depan) - + YZ (Side) YZ (sisi) @@ -1983,12 +2018,12 @@ such as "Arial:Bold" Pengaturan Umum - + Construction group name Nama grup konstruksi - + Tolerance Toleransi @@ -2013,22 +2048,22 @@ such as "Arial:Bold" Di sini Anda dapat menentukan direktori yang berisi file SVG yang berisi definisi <pattern> yang dapat ditambahkan ke pola menetas Draft standar - + Draft interface mode Rancang mode antarmuka - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Ini adalah mode UI di mana modul Draft akan bekerja: Mode Toolbar akan menempatkan semua pengaturan Draft di toolbar terpisah, sementara mode taskbar akan menggunakan sistem TaskView FreeCAD untuk semua interaksi penggunanya - + Toolbar Toolbar - + Taskview Tampilan tugas @@ -2058,12 +2093,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Biasanya, setelah menyalin objek, salinannya bisa dipilih. Jika opsi ini dicentang, maka objek dasar akan dipilih. - + Select base objects after copying Pilih objek dasar setelah disalin @@ -2098,7 +2133,7 @@ such as "Arial:Bold" Mainlines akan ditarik lebih tebal. Tentukan di sini berapa banyak kotak di antara jalur utama. - + Internal precision level Tingkat presisi internal @@ -2213,12 +2248,12 @@ such as "Arial:Bold" Terjemahkan warna garis putih ke hitam - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Saat ini dicentang, alat Draft akan membuat bagian primitif daripada membuat draf benda, bila tersedia. - + Use Part Primitives when available Gunakan Bagian Primitif bila tersedia @@ -2238,12 +2273,7 @@ such as "Arial:Bold" Selalu jepret (nonaktifkan snap mod) - - Construction geometry - Geometri konstruksi - - - + Construction geometry color Konstruksi geometri warna @@ -2383,7 +2413,7 @@ such as "Arial:Bold" Pilih file font - + Fill objects with faces whenever possible Isi benda dengan wajah bila memungkinkan @@ -2673,7 +2703,7 @@ such as "Arial:Bold" Pembaruan otomatis (hanya untuk importir lawas) - + Prefix labels of Clones with: Label awalan Klon dengan: @@ -2710,7 +2740,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Ini adalah metode yang dipilih untuk mengimpor objek SVG menjadi FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Jika ini dicentang, objek akan muncul sebagai terisi secara default. Jika tidak, mereka akan muncul sebagai bingkai gambar @@ -2790,17 +2820,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Jika ini dicentang, benda-benda dari lapisan yang sama akan bergabung ke dalam rancangan blok, mengubah tampilan lebih cepat, tapi membuat mereka kurang mudah diedit - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2880,12 +2900,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2896,695 +2916,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometri Konstruksi + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Dekat + + + + O + O + + + + Copy + Salinan + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Panjangnya + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draf Snap - - - Draft creation tools - Draft alat pembuatan - - - - Draft modification tools - Draft alat modifikasi - - - - Utilities - Utilitas - - - - Wire tools - Alat kawat - - - - Snapping - Gertakan - draft - + not shape found bukan bentuk yang ditemukan - + All Shapes must be co-planar Semua Bentuk harus co-planar - + The given object is not planar and cannot be converted into a sketch. Objek yang diberikan tidak planar dan tidak bisa diubah menjadi sketsa. - + Unable to guess the normal direction of this object Tidak dapat menebak arah normal objek ini - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle mode konstruksi - + Current line color Warna garis saat ini - + Current face color Warna wajah saat ini - + Current line width Lebar baris saat ini - + Current font size Ukuran font saat ini - + Apply to selected objects Terapkan ke objek yang dipilih - + Autogroup off Autogroup mati - + active command: perintah aktif: - + None Tidak ada - + Active Draft command Perintah Aktif Rancang - + X coordinate of next point Koordinat titik X berikutnya - + X X - + Y Y - + Z Z - + Y coordinate of next point Koordinat titik Y berikutnya - + Z coordinate of next point Koordinat titik Z berikutnya - + Enter point Masukkan titik - + Enter a new point with the given coordinates Masukkan sebuah titik yang baru dengan koordinat tertentu - + Length Panjangnya - + Angle Sudut - + Length of current segment Panjang segmen saat ini - + Angle of current segment Sudut segmen saat ini - + Radius Jari-jari - + Radius of Circle Jari-jari lingkaran - + If checked, command will not finish until you press the command button again Jika dicentang, perintah tidak akan selesai sampai Anda menekan tombol perintah lagi - + If checked, an OCC-style offset will be performed instead of the classic offset Jika dicentang, offset gaya OCC akan dilakukan alih-alih offset klasik - + &OCC-style offset & Offset gaya OCC - + Add points to the current object Tambahkan poin ke objek saat ini - + Remove points from the current object Hapus titik dari objek saat ini - + Make Bezier node sharp Buat node Bezier tajam - + Make Bezier node tangent Buat node Bezier bersinggungan - + Make Bezier node symmetric Buat nodal Bezier simetris - + Sides Sisi - + Number of sides Jumlah sisi - + Offset Mengimbangi - + XY (top) XY (atas) - - Select XY plane - Pilih Bidang XY - - - + XZ (front) XZ (depan) - - Select XZ plane - Pilih bidang XZ - - - + YZ (side) YZ (sisi) - - Select YZ plane - Pilih bidang YZ - - - + View Tampilan - - Select plane perpendicular to the current view - Pilih bidang tegak lurus untuk tampilan saat ini - - - + Auto Mobil - - Do not project points to a drawing plane - jangan memproyeksikan titik ke bidang gambar - - - + Text string to draw String teks untuk menggambar - + String Tali - + Height of text Tinggi teks - + Height Tinggi - + Intercharacter spacing Jarak antar karakte - + Tracking Pelacakan - + Full path to font file: Jalur penuh ke file font: - + Open a FileChooser for font file Buka FileChooser untuk file font - + Grid spacing Jarak kisi - + The spacing between the grid lines Jarak antar garis grid - + Main line every Jalur utama setiap - + The number of lines between main lines Jumlah garis antara garis utama - + Center plane on view Pusat pesawat di lihat - - Select Plane - Pilih Bidang - - - + Line Garis - + DWire DWire - + Circle Lingkaran - + Center X Pusat X - + Arc Busur - + Point Titik - + Label Label - + Distance Distance - + Trim Memangkas - + Pick Object Ambil Objek - + Edit Edit - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Lokal X - + Local Y Lokal Y - + Local Z Lokal Z - + Invalid Size value. Using 200.0. Nilai ukuran tidak valid Menggunakan 200.0. - + Invalid Tracking value. Using 0. Nilai Pelacakan tidak valid Menggunakan 0. - + Please enter a text string. Harap masukkan string teks. - + Select a Font file Pilih file Font - + Please enter a font file. Silahkan masukkan file font. - + Autogroup: Autogroup: - + Faces Wajah - + Remove Menghapus - + Add Menambahkan - + Facebinder elements Elemen facebinder - + Create Line Membuat garis - - Pick next point: - - Pilih titik berikutnya: - - - - + Convert to Wire Konversikan ke Kawat - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Buat BezCurve - + Rectangle Empat persegi panjang - + Create Plane Buat Pesawat - + Create Rectangle Buat Rectangle - + Create Circle Buat Lingkaran - + Create Arc Buat Arc - + Start Angle Mulai Angle - + Aperture Bukaan - + Polygon Poligon - + Create Polygon Buat Polygon - + Ellipse Elips - + Create Ellipse Buat Ellipse - + Text Teks - + Create Text Buat Teks - + Dimension Dimensi - + Create Dimension Buat Dimensi - + ShapeString ShapeString - + Create ShapeString Buat ShapeString - + Copy Salinan - + Move Pindah - + Change Style Ubah Gaya - + Rotate Memutar - - Cannot offset this object type - - Tidak bisa mengimbangi jenis objek ini - - - - + Stretch Stretch - + Upgrade Meningkatkan - + Downgrade Kelas bawah - + Selection is not a Knot Seleksi bukan Simpul - + Convert to Sketch Konversikan ke Sketsa - + Convert to Draft Konversikan ke Konsep - + Convert Mengubah - + Array Array - + Create Point Buat titik - + Mirror Cermin - + &Draft &Konsep @@ -3603,179 +3769,179 @@ To enabled FreeCAD to download these libraries, answer Yes. 2 - Menu Edit> Preferences> Import-Export> DXF> Aktifkan unduhan Atau unduh pustaka ini secara manual, seperti yang dijelaskan di https://github.com/yorikvanhavre/Draft- dxf-importer Untuk mengaktifkan FreeCAD mendownload library ini, jawab Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Dekat @@ -3820,7 +3986,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3835,7 +4001,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3850,454 +4016,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Selesai - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Bawaan - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Buat B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4307,56 +4298,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Skala - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Puncak + + + + Front + Depan + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Otomatis + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Perputaran + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Konsep + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitas + + + + Wire tools + Alat kawat + + + + Snapping + Gertakan + diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 169ed3d980..c168c023e5 100755 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 67c64a1e2d..e552538eee 100755 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern - Definisci un modello di tratteggio + Definisce un modello di tratteggio - + Sets the size of the pattern Imposta la dimensione del modello - + Startpoint of dimension Punto iniziale della dimensione - + Endpoint of dimension Punto finale della dimensione - + Point through which the dimension line passes Punto attraverso il quale passa la linea di quota - + The object measured by this dimension L'oggetto misurato da questa dimensione - + The geometry this dimension is linked to La geometria a cui è collegata questa dimensione - + The measurement of this dimension La misura di questa dimensione - + For arc/circle measurements, false = radius, true = diameter Per misure di arco o cerchio, false = raggio, true = diametro - + Font size Dimensione del carattere - + The number of decimals to show Il numero di decimali da mostrare - + Arrow size - Dimensione delle frecce + Dimensione freccia - + The spacing between the text and the dimension line La spaziatura tra il testo e la linea di quota - + Arrow type Tipo di freccia - + Font name Tipo di carattere - + Line width Spessore linea - + Line color Colore della linea - + Length of the extension lines Lunghezza delle linee di estensione - + Rotate the dimension arrows 180 degrees Ruota le frecce della dimensione di 180 gradi - + Rotate the dimension text 180 degrees Ruota il testo della dimensione di 180 gradi - + Show the unit suffix Visualizza il suffisso dell'unità - + The position of the text. Leave (0,0,0) for automatic position La posizione del testo che descrive questo spazio. Lasciare (0, 0,0) per posizionarlo automaticamente - + Text override. Use $dim to insert the dimension length Sovrascrivere il testo. Utilizzare $dim per inserire la lunghezza della dimensione - + A unit to express the measurement. Leave blank for system default - Un'unità per esprimere la misura. Lasciare vuoto per usare l'impostazione predefinita del sistema + Unità per esprimere la misura. Lasciare vuoto per il default di sistema - + Start angle of the dimension Angolo iniziale della dimensione - + End angle of the dimension Angolo finale della dimensione - + The center point of this dimension Il punto centrale di questa dimensione - + The normal direction of this dimension La direzione normale di questa dimensione - + Text override. Use 'dim' to insert the dimension length Sovrascrivere il testo. Utilizzare 'dim' per inserire la lunghezza della dimensione - + Length of the rectangle - Larghezza del rettangolo + Lunghezza del rettangolo - + Radius to use to fillet the corners Raggio da utilizzare per raccordare gli angoli - + Size of the chamfer to give to the corners Dimensione dello smusso da dare agli angoli - + Create a face Crea una faccia - + Defines a texture image (overrides hatch patterns) Definisce un'immagine di texture (sovrascrive i modelli di tratteggio) - + Start angle of the arc Angolo iniziale dell'arco - + End angle of the arc (for a full circle, give it same value as First Angle) Angolo finale dell'arco (per un cerchio completo, dare lo stesso valore del primo angolo) - + Radius of the circle Raggio del cerchio - + The minor radius of the ellipse Il raggio minore dell'ellisse - + The major radius of the ellipse Il raggio maggiore dell'ellisse - + The vertices of the wire I vertici della polilinea - + If the wire is closed or not Se la polilinea è chiusa o no - + The start point of this line Il punto iniziale di questa linea - + The end point of this line Il punto finale di questa linea - + The length of this line La lunghezza di questa linea - + Create a face if this object is closed Crea una faccia se l'oggetto è chiuso - + The number of subdivisions of each edge Il numero di suddivisioni di ogni bordo - + Number of faces Numero di facce - + Radius of the control circle Raggio del cerchio di controllo - + How the polygon must be drawn from the control circle Come deve essere disegnato il poligono rispetto al cerchio di controllo - + Projection direction Direzione di proiezione - + The width of the lines inside this object La larghezza delle linee all'interno di questo oggetto - + The size of the texts inside this object La dimensione dei testi all'interno di questo oggetto - + The spacing between lines of text - La spaziatura tra le righe del testo + La spaziatura tra le righe di testo - + The color of the projected objects Il colore degli oggetti proiettati - + The linked object L'oggetto collegato - + Shape Fill Style Stile di riempimento della forma - + Line Style Stile linea - + If checked, source objects are displayed regardless of being visible in the 3D model Se selezionata, gli oggetti di origine vengono visualizzati indipendentemente dall'essere visibili nel modello 3D - + Create a face if this spline is closed - Crea una faccia se questa b-spline è chiusa + Crea una faccia se questa spline è chiusa - + Parameterization factor Fattore di parametrizzazione - + The points of the Bezier curve I punti della curva di Bezier - + The degree of the Bezier function Il grado della funzione Bezier - + Continuity Continuità - + If the Bezier curve should be closed or not Se la curva di Bézier deve essere chiusa o no - + Create a face if this curve is closed Crea una faccia se questa curva è chiusa - + The components of this block I componenti di questo blocco - + The base object this 2D view must represent L'oggetto di base che questa vista 2D deve rappresentare - + The projection vector of this object Il vettore di proiezione di questo oggetto - + The way the viewed object must be projected Il modo in cui l'oggetto osservato deve essere proiettato - + The indices of the faces to be projected in Individual Faces mode Gli indici delle facce da proiettare in modalità Facce singole - + Show hidden lines Visualizza le linee nascoste - + The base object that must be duplicated - L'oggetto di base che deve essere duplicato + L'oggetto base che deve essere duplicato - + The type of array to create - Il tipo di schiera da creare + Il tipo di serie da creare - + The axis direction La direzione dell'asse - + Number of copies in X direction Numero di copie nella direzione X - + Number of copies in Y direction Numero di copie nella direzione Y - + Number of copies in Z direction Numero di copie nella direzione Z - + Number of copies Numero di copie - + Distance and orientation of intervals in X direction Distanza e orientamento degli intervalli nella direzione X - + Distance and orientation of intervals in Y direction Distanza e orientamento degli intervalli nella direzione Y - + Distance and orientation of intervals in Z direction Distanza e orientamento degli intervalli nella direzione Z - + Distance and orientation of intervals in Axis direction Distanza e orientamento degli intervalli nella direzione degli assi - + Center point Centro - + Angle to cover with copies Angolo da coprire con le copie - + Specifies if copies must be fused (slower) Specifica se le copie devono essere fuse (più lento) - + The path object along which to distribute objects Il tracciato lungo il quale distribuire gli oggetti - + Selected subobjects (edges) of PathObj - Suboggetti di PathObj selezionati (bordi) + Suboggetti selezionati (bordi) di PathObj - + Optional translation vector Vettore di traslazione opzionale - + Orientation of Base along path - Orienta l'oggetto di base lungo il percorso + Orienta l'oggetto di base lungo il tracciato - + X Location Posizione X - + Y Location Posizione Y - + Z Location Posizione Z - + Text string Stringa di testo - + Font file name - Nome del file di font + Nome del font - + Height of text Altezza del testo - + Inter-character spacing Spaziatura tra i caratteri - + Linked faces Facce collegate - + Specifies if splitter lines must be removed Specifica se le linee di divisione devono essere rimosse - + An optional extrusion value to be applied to all faces Un valore opzionale di estrusione da applicare a tutte le facce - + Height of the rectangle Altezza del rettangolo - + Horizontal subdivisions of this rectangle Suddivisioni orizzontali di questo rettangolo - + Vertical subdivisions of this rectangle Suddivisioni verticali di questo rettangolo - + The placement of this object Il posizionamento di questo oggetto - + The display length of this section plane La lunghezza di visualizzazione di questo piano di sezione - + The size of the arrows of this section plane La dimensione delle frecce di questo piano di sezione - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Per le modalità Cutlines e Cutfaces, questo lascia le facce nella posizione di taglio - + The base object is the wire, it's formed from 2 objects L'oggetto base è una polilinea, essa è formata da due oggetti - + The tool object is the wire, it's formed from 2 objects - L'oggetto utensile è il wire, è formato da 2 oggetti + L'oggetto utensile è una polilinea, essa è formata da due oggetti - + The length of the straight segment La lunghezza del segmento di retta - + The point indicated by this label Il punto indicato da questa etichetta - + The points defining the label polyline I punti che definiscono la polilinea dell'etichetta - + The direction of the straight segment La direzione del segmento - + The type of information shown by this label Il tipo di informazioni visualizzate da questa etichetta - + The target object of this label L'oggetto di destinazione di questa etichetta - + The text to display when type is set to custom Il testo da visualizzare quando il tipo è impostato su personalizzato - + The text displayed by this label - Il testo visualizzato di questa etichetta + Il testo visualizzato da questa etichetta - + The size of the text La dimensione del testo - + The font of the text - Il tipo di testo + Il tipo di font del testo - + The size of the arrow La dimensione della freccia - + The vertical alignment of the text L'allineamento verticale del testo - + The type of arrow of this label Il tipo di freccia di questa etichetta - + The type of frame around the text of this object Il tipo di cornice attorno al testo di questo oggetto - + Text color - Colore del testo + Colore testo - + The maximum number of characters on each line of the text box - Il numero massimo di caratteri in ogni riga della casella di testo + Il numero massimo di caratteri per ogni riga della casella di testo - + The distance the dimension line is extended past the extension lines La lunghezza predefinita a cui estendere la linea di quota oltre le linee di riferimento - + Length of the extension line above the dimension line Lunghezza della linea di riferimento oltre la linea di quota - + The points of the B-spline I punti della B-spline - + If the B-spline is closed or not Se la B-spline è chiusa o no - + Tessellate Ellipses and B-splines into line segments Tessellare ellissi e B-spline in segmenti di linea - + Length of line segments if tessellating Ellipses or B-splines into line segments Lunghezza dei segmenti di linea per tessellare ellissi o B-spline - + If this is True, this object will be recomputed only if it is visible Se questo è Vero (True), l'oggetto verrà ricalcolato solo se è visibile - + Base Base - + PointList Lista di punti - + Count Num. di sezioni - + The objects included in this clone Gli oggetti inclusi in questo clone - + The scale factor of this clone - Il fattore di scala di questo clone + Il fattore di ridimensionamento di questo clone - + If this clones several objects, this specifies if the result is a fusion or a compound Se questo clona diversi oggetti, consente di specificare se il risultato è una fusione o un composto - + This specifies if the shapes sew Questo specifica se le forme sono cucite - + Display a leader line or not - Mostra linee guida o no + Visualizza linee guida o no - + The text displayed by this object Il testo visualizzato da questo oggetto - + Line spacing (relative to font size) Interlinea (relativo alla dimensione del carattere) - + The area of this object - The area of this object + L'area di questo oggetto - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Visualizza un simbolo di quotatura all'estremità della polilinea - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusione delle pareti e degli oggetti della struttura dello stesso tipo di materiale + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Pendenza - + Scale Scala - + Writing camera position Scrivere la posizione della camera - + Writing objects shown/hidden state Scrivere lo stato mostrato o nascosto degli oggetti - + X factor Fattore X - + Y factor Fattore Y - + Z factor Fattore Z - + Uniform scaling - Scalatura uniforme + Ridimensionamento uniforme - + Working plane orientation Orientamento del piano di lavoro @@ -776,23 +811,30 @@ Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager - Il download delle librerie dxf non è riuscito. Si prega di installare manualmente le librerie dxf tramite l'addon dal menu Strumenti-> Addon Manager + Download delle librerie dxf non riuscito. +Si prega di installare la libreria dxf manualmente +dal menu Strumenti -> Addon Manager - + This Wire is already flat - Questo Wire è già piatto + Questa polilinea è già piatta - + Pick from/to points Selezionare i punti da/a - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Pendenza da assegnare alle linee o polilinee selezionate: 0 = orizzontale, 1 = 45 gradi verso l'alto, -1 = 45 gradi verso il basso + + + Create a clone + Crea un clone + DraftShapeStringGui @@ -844,28 +886,28 @@ from menu Tools -> Addon Manager Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Inserire le coordinate o selezionare un punto con il mouse. Reset 3d point selection - Reset 3d point selection + Azzera la selezione del punto 3D Reset Point - Reset Point + Reimposta punto Draft_AddConstruction - + Add to Construction group Aggiungi al gruppo Costruzione - + Adds the selected objects to the Construction group Aggiunge gli oggetti selezionati al gruppo Costruzione @@ -873,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Aggiungi punto - + Adds a point to an existing Wire or B-spline Aggiunge un punto a una polilinea o una B-spline esistente @@ -886,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Sposta nel gruppo... - + Moves the selected object(s) to an existing group Sposta gli oggetti selezionati in un gruppo esistente @@ -899,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Applica lo stile corrente - + Applies current line width and color to selected objects Applica lo spessore ed il colore della linea corrente agli oggetti selezionati @@ -912,59 +954,59 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Arco - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Crea un arco da centro e raggio. Ctrl per spuntare, Maiusc per vincolare Draft_ArcTools - + Arc tools - Arc tools + Strumenti Arco Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arco da 3 punti - + Creates an arc by 3 points - Creates an arc by 3 points + Crea un arco da 3 punti Draft_Array - + Array - Schiera + Serie - + Creates a polar or rectangular array from a selected object - Crea una schiera polare o rettangolare da un oggetto selezionato + Crea una serie polare o rettangolare da un oggetto selezionato Draft_AutoGroup - + AutoGroup Auto-gruppo - + Select a group to automatically add all Draft & Arch objects to Selezionare un gruppo a cui aggiungere automaticamente tutti gli oggetti Draft & Arch @@ -972,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Crea una B-spline multi-punto. Ctrl per eseguire lo snap, Maiusc per vincolare @@ -985,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Curva di Bezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Crea una curva di Bezier. Ctrl per agganciare, Maiusc per vincolare @@ -998,20 +1040,20 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + Strumenti Bezier Draft_Circle - + Circle Cerchio - + Creates a circle. CTRL to snap, ALT to select tangent objects Crea un cerchio. CTRL per agganciare, ALT per selezionare oggetti tangenti @@ -1019,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Clona - + Clones the selected object(s) Clona gli oggetti selezionati @@ -1032,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Chiudi la linea - + Closes the line being drawn Chiude la linea che si sta disegnando @@ -1045,27 +1087,27 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + Curva di Bezier cubica - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Crea una curva di Bezier cubica +Cliccare e trascinare per definire i punti di controllo. Ctrl per snap, Maiusc per vincolare Draft_DelPoint - + Remove Point Rimuovi punto - + Removes a point from an existing Wire or B-spline Rimuove un punto da una polilinea o una B-spline esistente @@ -1073,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Quota - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crea una quotatura. Ctrl per agganciare, Maiusc per vincolare, Alt per selezionare un segmento @@ -1086,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Declassa - + Explodes the selected objects into simpler objects, or subtracts faces Esplode gli oggetti selezionati in oggetti più semplici, o sottrae facce @@ -1099,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Da Draft a Sketch - + Convert bidirectionally between Draft and Sketch objects Converte oggetti Draft in Schizzi, e viceversa @@ -1112,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Disegno - + Puts the selected objects on a Drawing sheet Mette gli oggetti selezionati in un foglio di disegno @@ -1125,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Modifica - + Edits the active object Modifica l'oggetto attivo @@ -1138,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Modifica evoluta - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Modifica gli oggetti selezionati Draft_Ellipse - + Ellipse Ellisse - + Creates an ellipse. CTRL to snap Crea un'ellisse. CTRL per lo snap @@ -1169,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Lega facce - + Creates a facebinder object from selected face(s) Crea un oggetto facebinder dalla faccia(e) selezionata @@ -1182,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Termina la linea - + Finishes a line without closing it Termina la linea senza chiuderla @@ -1195,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inverti la direzione - + Flip the normal direction of a dimension Inverte la direzione del testo di una dimensione @@ -1208,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Ripara - + Heal faulty Draft objects saved from an earlier FreeCAD version Ripara gli oggetti Draft difettosi salvati con una versione precedente di FreeCAD @@ -1221,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Congiungi - + Joins two wires together Unisce due contorni @@ -1234,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Etichetta - + Creates a label, optionally attached to a selected object or element Crea un'etichetta, eventualmente collegata a un oggetto selezionato o elemento + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linea - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crea una linea tra due punti. Ctrl per agganciare, Maiusc per vincolare @@ -1260,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Specchio - + Mirrors the selected objects along a line defined by two points Rispecchia gli oggetti selezionati lungo una linea definita da due punti @@ -1273,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Sposta - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Sposta gli oggetti selezionati tra 2 punti. Ctrl per agganciare, Maiusc per vincolare Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Crea un offset dell'oggetto selezionato. Ctrl per agganciare, Maiusc per vincolare, Alt per creare una copia @@ -1299,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Copie su tracciato - + Creates copies of a selected object along a selected path. Crea copie di un oggetto selezionato lungo un tracciato selezionato. @@ -1312,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punto - + Creates a point object Crea un oggetto punto @@ -1325,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Copie su punti - + Creates copies of a selected object on the position of points. Crea copie di un oggetto selezionato sulla posizione dei punti. @@ -1338,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Poligono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crea un poligono regolare. Ctrl per agganciare, Maiusc per vincolare @@ -1351,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rettangolo - + Creates a 2-point rectangle. CTRL to snap Crea un rettangolo tra due punti. CTRL per agganciare @@ -1364,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Ruota - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Ruota gli oggetti selezionati. Ctrl per agganciare, Maiusc per vincolare, Alt per creare una copia @@ -1377,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Scala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Scala gli oggetti selezionati partendo da un punto base. Ctrl per agganciare, Maiusc per vincolare, Alt per creare una copia @@ -1390,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Seleziona gruppo - + Selects all objects with the same parents as this group Seleziona tutti gli oggetti di questo gruppo aventi gli stessi genitori @@ -1403,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Seleziona piano - + Select a working plane for geometry creation Seleziona un piano di lavoro per creare la geometria @@ -1416,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Crea un oggetto Piano di lavoro delegato (proxy) del piano di lavoro attuale - + Create Working Plane Proxy Crea piano di lavoro Proxy @@ -1429,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Vista Profilo 2D - + Creates Shape 2D views of selected objects Crea delle viste "Profilo 2D" degli oggetti selezionati @@ -1442,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma da testo... - + Creates text string in shapes. Crea una stringa di testo nella forma. @@ -1455,25 +1505,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Mostra la barra Snap - + Shows Draft snap toolbar - Mostra la barra degli strumenti di aggancio, Snap + Mostra la barra degli strumenti di aggancio Draft Draft_Slope - + Set Slope Imposta la pendenza - + Sets the slope of a selected Line or Wire Imposta la pendenza di una linea o polilinea selezionata @@ -1481,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angoli - + Snaps to 45 and 90 degrees points on arcs and circles Aggancia i punti a 45 e 90 gradi su archi e cerchi @@ -1494,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Snap al centro di cerchi e archi @@ -1507,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensioni - + Shows temporary dimensions when snapping to Arch objects Mostra le quotature temporanee durante l'aggancio agli oggetti Arch @@ -1520,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punto finale - + Snaps to endpoints of edges Aggancia i punti finali di una linea @@ -1533,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Estensione - + Snaps to extension of edges Aggancia le linee sulla loro estensione @@ -1546,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Griglia - + Snaps to grid points Aggancia i punti della griglia @@ -1559,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersezione - + Snaps to edges intersections Aggancia alle intersezioni delle linee @@ -1572,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Attiva/Disattiva - + Activates/deactivates all snap tools at once Attiva/Disattiva contemporaneamente tutti gli strumenti snap - + Lock Blocca @@ -1590,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punto medio - + Snaps to midpoints of edges Aggancia ai punti medi delle linee @@ -1603,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Vicino - + Snaps to nearest point on edges Aggancia una linea nel punto più vicino @@ -1616,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortogonale - + Snaps to orthogonal and 45 degrees directions Snap ortogonale e a 45 gradi @@ -1629,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallelo - + Snaps to parallel directions of edges Aggancia in direzione parallela alle linee @@ -1642,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicolare - + Snaps to perpendicular points on edges Aggancia una linea nei punti di perpendicolarità @@ -1655,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Speciale - + Snaps to special locations of objects Aggancia a punti speciali degli oggetti @@ -1668,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Piano di lavoro - + Restricts the snapped point to the current working plane Limita la zona di snap al piano di lavoro corrente @@ -1681,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Dividi - + Splits a wire into two wires Divide un contorno in due parti @@ -1694,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stira - + Stretches the selected objects Stira gli oggetti selezionati @@ -1707,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Testo - + Creates an annotation. CTRL to snap Crea un'annotazione. CTRL per lo snap @@ -1720,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Attiva o disattiva la Modalità Costruzione per i prossimi oggetti. - + Toggle Construction Mode Attiva/disattiva modalità di costruzione @@ -1733,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Attiva/Disattiva Modalità Continua - + Toggles the Continue Mode for next commands. Attiva o disattiva la Modalità "Continua" per i comandi successivi. @@ -1746,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Cambia la visualizzazione - + Swaps display mode of selected objects between wireframe and flatlines Commuta la modalità di visualizzazione degli oggetti selezionati da "reticolo" a "facce piene" o viceversa @@ -1759,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Mostra/Nascondi la griglia - + Toggles the Draft grid on/off Attiva o disattiva la griglia di Draft - + Grid Griglia - + Toggles the Draft grid On/Off Attiva o disattiva la griglia di Draft @@ -1782,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Tronca/Estendi - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Tronca o estende l'oggetto selezionato, o estrude singole facce. Ctrl per agganciare, Maiusc per vincolare al segmento corrente o alla sua normale, Alt per invertire @@ -1795,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Annulla l'ultimo segmento - + Undoes the last drawn segment of the line being drawn Annulla l'ultimo segmento della linea che si sta disegnando @@ -1808,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Promuovi - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Unisce gli oggetti selezionati in uno solo o converte i contorni chiusi in facce piene, o unisce le facce - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Aggiunge un VisGroup - - Draft_Wire - - DWire - Polilinea + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crea una polilinea (DWire, Wire di Draft) da una serie di punti. Ctrl per eseguire lo snap, Maiusc per vincolare + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Polilinea in B-spline - + Converts between Wire and B-spline Converte tra polilinea e B-spline @@ -1860,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Impostazioni generali di Draft - + This is the default color for objects being drawn while in construction mode. Questo è il colore predefinito per oggetti che vengono disegnati in modalità costruzione. - + This is the default group name for construction geometry Questo è il nome predefinito del gruppo per la geometria di costruzione - + Construction Costruzione @@ -1885,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSalva il colore e lo spessore di linea correnti, per tutte le sessioni - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Se questa opzione è spuntata, la modalità copia sarà mantenuta per tutti i comandi, altrimenti i comandi si avvieranno sempre in modalità senza-copia - + Global copy mode Modalità di copia globale - + Default working plane Piano di lavoro predefinito - + None Nessuno - + XY (Top) XY (Superiore) - + XZ (Front) XZ (Frontale) - + YZ (Side) YZ (Laterale) @@ -1984,12 +2021,12 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Impostazioni generali - + Construction group name Nome del gruppo di costruzione - + Tolerance Tolleranza @@ -2014,22 +2051,22 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Qui è possibile specificare un repertorio con dei file SVG contenenti definizioni <pattern> che possono essere aggiunti ai motivi di campitura standard di Draft - + Draft interface mode Modalità d'interfaccia Draft - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Questa è la modalità in cui funzionerà l'Interfaccia Utente del modulo Draft per tutte le sue interazioni con l'utente: la modalità "barra strumenti" porrà tutte le impostazioni di Draft in barre degli strumenti indipendenti, mentre la modalità "barra attività" utilizzerà il sistema Vista delle attività di FreeCAD - + Toolbar Barra degli strumenti - + Taskview Finestra Azioni @@ -2059,12 +2096,12 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Modalità di Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalmente, dopo la copia di oggetti, rimangono selezionate le copie. Spuntando questa opzione, rimarranno invece selezionati gli oggetti di base. - + Select base objects after copying Seleziona gli oggetti di base dopo la copia @@ -2099,7 +2136,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Le linee principali saranno disegnate più spesse. Specificare qui il numero di quadrati tra linee principali. - + Internal precision level Livello di precisione interno @@ -2131,7 +2168,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Export 3D objects as polyface meshes - Esporta gli oggetti 3D come maglie poligonali multifaccia + Esporta gli oggetti 3D come mesh poligonali multifaccia @@ -2141,7 +2178,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Show Draft Snap toolbar - Mostra la barra degli strumenti di aggancio, Snap + Mostra la barra degli strumenti di aggancio Draft @@ -2166,12 +2203,12 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Use standard font size for texts - Usa dimensioni di font standard per testi + Usa la dimensione standard del font per i testi If this is checked, hatches will be converted into simple wires - Se questo è selezionato, i tratteggi sono convertiti in semplici wire + Se selezionato, i tratteggi sono convertiti in semplici wire @@ -2181,7 +2218,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - Se questo è selezionato, quando le polilinee hanno una larghezza definita, sono disegnate come wire chiusi con la larghezza corretta + Se selezionato, quando le polilinee hanno una larghezza definita, saranno visualizzate come wire chiusi con larghezza corretta @@ -2191,7 +2228,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Style of SVG file to write when exporting a Sketch. - Stile dei file in formato SVG quando si esporta uno sketch. + Stile dei file SVG quando si esporta uno Sketch. @@ -2201,12 +2238,12 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Raw (for CAM) - RAW (per CAM) + Raw (per CAM) When exporting SVG views, make all white linework appear in black, for better readability against white backgrounds - Quando si esportano viste SVG, rende nere tutte le linee bianche, per una migliore leggibilità su sfondi bianchi + Quando si esportano viste SVG rende nere tutte le linee bianche, per una migliore leggibilità su sfondi bianchi @@ -2214,12 +2251,12 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Trasforma le linee bianche in linee nere - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Quando questo è selezionato, gli strumenti Draft creano primitive di Part invece di oggetti Draft, se è possibile. - + Use Part Primitives when available Usa le primitive di Part quando sono disponibili @@ -2231,7 +2268,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" If this is checked, snapping is activated without the need to press the snap mod key - Selezionando questa opzione, lo snap è attivo senza dover premere il tasto di attivazione + Selezionando questa opzione, lo snap si attiva senza dover premere il tasto di attivazione @@ -2239,12 +2276,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Aggancia sempre (disabilita la Modalità di aggancio) - - Construction geometry - Geometria di costruzione - - - + Construction geometry color Colore della geometria di costruzione @@ -2384,7 +2416,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Seleziona un file di font - + Fill objects with faces whenever possible Riempi gli oggetti con le facce quando è possibile @@ -2675,7 +2707,7 @@ VisGroup è un tipo speciale di gruppo FreeCAD, con funzionalità aggiuntive: co Aggiornamento automatico (solo per il vecchio importatore) - + Prefix labels of Clones with: Prefisso per le etichette dei cloni: @@ -2712,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Questo è il metodo scelto per importare in FreeCAD il colore di un oggetto SVG. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Se questa opzione è spuntata, di default gli oggetti appaiono "a facce piene". Altrimenti, appaiono "a reticolo" @@ -2792,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Se questa opzione è spuntata, gli oggetti dello stesso livello sono uniti in Blocchi di Draft, aumentandone la velocità di visualizzazione, ma rendendoli meno facilmente modificabili - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Selezionando questa opzione, vengono visualizzate delle istruzioni passo-passo nella finestra Output quando si eseguono comandi di Draft - - - - Verbose command line mode - Modalità riga di comando dettagliata - - - + When drawing lines, set focus on Length instead of X coordinate Quando si disegnano linee, proponi la lunghezza invece della coordinata X @@ -2874,7 +2896,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Ellipse export is poorly supported. Use this to export them as polylines instead. - L'esportazione dell'ellisse è mal supportata. Usare questo per esportarla come polilinea. + L'esportazione dell'ellisse è mal supportata. Usare questo per esportarla invece come polilinea. @@ -2882,710 +2904,856 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Massimo segmento Spline: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Il numero di decimali nelle operazioni delle coordinate interne (es. 3=0.001). Tra gli utenti FreeCAD, i valori tra 6 e 8 sono generalmente considerati i migliori per l'esportazione. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Questo è il valore utilizzato da funzioni che usano una tolleranza. +Misure con valori sotto questo soglia saranno arrotondate. Questo valore sarà presto obsoleto, quindi il livello di precisione del campo precedente, vale per entrambi. Use legacy python exporter - Use legacy python exporter + Usa il vecchio esportatore python + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria di costruzione + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativo + + + + R + R + + + + Continue + Continua + + + + T + T + + + + Close + Chiudi + + + + O + O + + + + Copy + Copia + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Riempi + + + + L + L + + + + Exit + Esci + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Lunghezza + + + + H + H + + + + Wipe + Pulisci + + + + W + W + + + + Set WP + Imposta il piano di lavoro + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restringi X + + + + X + X + + + + Restrict Y + Restringi Y + + + + Y + Y + + + + Restrict Z + Restringi Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Snap Draft - - - Draft creation tools - Strumenti di creazione Draft - - - - Draft modification tools - Strumenti di modifica Draft - - - - Utilities - Utilità - - - - Wire tools - Strumenti Polilinea - - - - Snapping - Aggancio - draft - + not shape found forma non trovata - + All Shapes must be co-planar Tutte le forme devono essere complanari - + The given object is not planar and cannot be converted into a sketch. L'oggetto non è piano e non può essere convertito in uno schizzo. - + Unable to guess the normal direction of this object Impossibile stabilire la direzione normale di questo oggetto - + Draft Command Bar Barra dei comandi Draft - + Toggle construction mode Attiva/Disattiva la modalità costruzione - + Current line color Colore attuale della linea - + Current face color Colore attuale della faccia - + Current line width Larghezza attuale della riga - + Current font size Dimensione attuale del carattere - + Apply to selected objects Applica agli oggetti selezionati - + Autogroup off Disattiva auto-gruppo - + active command: comando attivo: - + None Nessuno - + Active Draft command Comando Draft attivo - + X coordinate of next point Coordinata X del prossimo punto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordinata Y del prossimo punto - + Z coordinate of next point Coordinata Z del prossimo punto - + Enter point Inserisci punto - + Enter a new point with the given coordinates Inserisce un nuovo punto con le coordinate date - + Length Lunghezza - + Angle Angolo - + Length of current segment Lunghezza del segmento corrente - + Angle of current segment Angolo del segmento corrente - + Radius Raggio - + Radius of Circle Raggio del Cerchio - + If checked, command will not finish until you press the command button again Se spuntato, il comando non termina finché non si preme nuovamente il pulsante di comando - + If checked, an OCC-style offset will be performed instead of the classic offset Se spuntato, viene eseguito un offset in stile OCC invece dell'offset classico - + &OCC-style offset &Offset in stile OCC - + Add points to the current object Aggiungi punti all'oggetto corrente - + Remove points from the current object Rimuovi punti dall'oggetto corrente - + Make Bezier node sharp Crea nodo Bezier spigoloso - + Make Bezier node tangent Crea nodo Bezier tangente - + Make Bezier node symmetric Nodo Bezier simmetrico - + Sides Lati - + Number of sides Numero di lati - + Offset Offset - + XY (top) XY (dall'alto) - - Select XY plane - Seleziona il piano XY - - - + XZ (front) XZ (frontale) - - Select XZ plane - Seleziona il piano XZ - - - + YZ (side) YZ (laterale) - - Select YZ plane - Seleziona il piano YZ - - - + View Vista - - Select plane perpendicular to the current view - Seleziona il piano perpendicolare alla vista corrente - - - + Auto Auto - - Do not project points to a drawing plane - Non proiettare i punti su un piano di disegno - - - + Text string to draw Stringa di testo da disegnare - + String Stringa - + Height of text Altezza del testo - + Height Altezza - + Intercharacter spacing Spaziatura intercarattere - + Tracking Crenatura - + Full path to font file: Percorso completo del file di font: - + Open a FileChooser for font file Apre un finestra per selezionare un file di font - + Grid spacing Spaziatura della griglia - + The spacing between the grid lines La spaziatura tra le linee della griglia - + Main line every Linea principale ogni - + The number of lines between main lines Il numero di linee tra linee principali - + Center plane on view Centra piano su vista corrente - - Select Plane - Seleziona il piano - - - + Line Linea - + DWire Polilinea - + Circle Cerchio - + Center X Centro X - + Arc Arco - + Point Punto - + Label Etichetta - + Distance Distanza - + Trim Taglia - + Pick Object Scegliere un Oggetto - + Edit Modifica - + Global X X globale - + Global Y Y globale - + Global Z Z globale - + Local X X locale - + Local Y Y locale - + Local Z Z locale - + Invalid Size value. Using 200.0. Dimensione non valida. Uso 200.0. - + Invalid Tracking value. Using 0. Valore di crenatura non valido. Utilizzato 0. - + Please enter a text string. Inserire una stringa di testo. - + Select a Font file Seleziona un file di font - + Please enter a font file. Inserire un file di font. - + Autogroup: Auto-gruppo: - + Faces Facce - + Remove Rimuovi - + Add Aggiungi - + Facebinder elements Elementi di Facebinder - + Create Line Crea Linea - - Pick next point: - - Scegliere il prossimo punto: - - - - + Convert to Wire Converti in Wire - + BSpline B-spline - + BezCurve Curva di Bezier - + Create BezCurve Crea Curva di Bezier - + Rectangle Rettangolo - + Create Plane Crea Piano - + Create Rectangle Crea Rettangolo - + Create Circle Crea Cerchio - + Create Arc Crea Arco - + Start Angle Angolo iniziale - + Aperture Apertura - + Polygon Poligono - + Create Polygon Crea Poligono - + Ellipse Ellisse - + Create Ellipse Crea Ellisse - + Text Testo - + Create Text Crea Testo - + Dimension Quota - + Create Dimension Crea Quotatura - + ShapeString Forma da Stringa - + Create ShapeString Crea Forma da Stringa - + Copy Copia - + Move Sposta - + Change Style Cambia stile - + Rotate Ruota - - Cannot offset this object type - - Non è possibile creare un offset con questo tipo di oggetto - - - - + Stretch Stira - + Upgrade Promuovi - + Downgrade Declassa - + Selection is not a Knot La selezione non è un nodo - + Convert to Sketch Converti in schizzo - + Convert to Draft Converti in Draft - + Convert Converti - + Array - Schiera + Serie - + Create Point Crea Punto - + Mirror Specchio - + &Draft &Draft @@ -3606,179 +3774,179 @@ Oppure scaricare queste librerie manualmente, come spiegato su https://github.co Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. - + Draft.makeBSpline: not enough points Draft.makeBSpline: numero di punti insufficiente - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: I punti finali sono uguali. Chiusura forzata - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: elenco dei punti non valido - + No object given - Nessun oggetto dato + Nessun oggetto fornito - + The two points are coincident I due punti sono coincidenti - + Found groups: closing each open object inside Trovati gruppi: chiusura di tutti gli oggetti interni aperti - + Found mesh(es): turning into Part shapes Trovare maglie poligonali multifaccia: trasformazione in forme - + Found 1 solidifiable object: solidifying it - Trovato 1 oggetto solidificable: traformazione in solido dell'oggetto trovato + Trovato 1 oggetto solidificable: trasformazione in solido dell'oggetto trovato - + Found 2 objects: fusing them Trovati 2 oggetti: fusione degli oggetti - + Found several objects: creating a shell Trovati oggeti diversi: creazione di un guscio - + Found several coplanar objects or faces: creating one face Trovati diversi oggetti o facce complanari: creazione di una faccia - + Found 1 non-parametric objects: draftifying it Trovato 1 oggetto non parametrico: parametrizzazione dell'oggetto - + Found 1 closed sketch object: creating a face from it Trovato 1 oggetto schizzo chiuso: creazione di una faccia da esso - + Found 1 linear object: converting to line Trovato 1 oggetto lineare: sua conversione in linea - + Found closed wires: creating faces Trovato dei contorni chiusi: creazione di facce - + Found 1 open wire: closing it Trovato 1 contorno aperto: chiusura del contorno - + Found several open wires: joining them - Trovati diversi wire aperti: creazione di un'unione + Trovate diverse polilinee aperte: unione in corso - + Found several edges: wiring them Trovati numerosi bordi: connessione degli stessi - + Found several non-treatable objects: creating compound Trovati diversi oggetti non trattabili: creazione di un composto - + Unable to upgrade these objects. Impossibile promuovere questi oggetti. - + Found 1 block: exploding it Trovato 1 blocco: esplosione del blocco - + Found 1 multi-solids compound: exploding it Trovato un solido multi-componente: sua scomposizione - + Found 1 parametric object: breaking its dependencies Trovato 1 oggetto parametrico: rottura delle sue dipendenze - + Found 2 objects: subtracting them Trovati 2 oggetti: sottrazione tra gli oggetti trovati - + Found several faces: splitting them Trovate diverse facce: divisione delle facce - + Found several objects: subtracting them from the first one Trovati diversi oggetti: loro sottrazione dal primo - + Found 1 face: extracting its wires Trovata 1 faccia: estrazione delle sue polilinee - + Found only wires: extracting their edges Trovate solo polilinee: estrazione dei rispettivi bordi - + No more downgrade possible Non è possibile effettuare ulteriori declassamenti - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: chiusa con lo stesso primo/ultimo punto. Geometria non aggiornata. - + No point found Nessun punto trovato - + ShapeString: string has no wires ShapeString: la stringa non ha polilinee - + Relative Relativo - + Continue Continua - + Close Chiudi @@ -3823,7 +3991,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Restringi Z - + Select edge Seleziona bordo @@ -3838,7 +4006,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Modalità di lunghezza - + Wipe Pulisci @@ -3853,446 +4021,271 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Scorri oggetti per lo snap - + Check this to lock the current angle Selezionare questa casella per bloccare l'angolo corrente - + Coordinates relative to last point or absolute Coordinate relative all'ultimo punto o assolute - + Filled Riempito - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Spuntare questa opzione se l'oggetto deve apparire "a facce piene", altrimenti esso appare "a reticolo" - - - + Finish Termina - + Finishes the current drawing or editing operation Termina il disegno corrente o l'operazione di modifica - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Annulla l'ultimo segmento - + Finishes and closes the current line Finisce e chiude la linea corrente - + Wipes the existing segments of this line and starts again from the last point Pulisce i segmenti esistenti di questa linea e ricomincia dall'ultimo punto - + Set WP Imposta il piano di lavoro - + Reorients the working plane on the last segment Riorienta il piano di lavoro sull'ultimo segmento - + Selects an existing edge to be measured by this dimension Seleziona un bordo esistente da misurare in questa quotatura - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Se selezionata, gli oggetti verranno copiati anziché spostati. Preferenze-> Draft-> Modalità di copia globale per mantenere questa modalità nei prossimi comandi - - options - opzioni - - - + Default - Normale + Predefinito - + Pick a face to define the drawing plane Scegliere una faccia per definire il piano di disegno - - First point: - Primo punto: - - - - Closing - Chiusura - - - + Create Wire Crea polilinea - - Removing last point - Rimuovi l'ultimo punto - - - - Next point: - Punto successivo: - - - - Restarting from - Riavvio da - - - + Unable to create a Wire from selected objects Impossibile creare una polilinea dagli oggetti selezionati - + Spline has been closed La Spline è stata chiusa - + Last point has been removed L'ultimo punto è stato rimosso - - Pick next point, or Finish (shift-F) or close (o): - Specificare il punto successivo, o terminare (Maiusc-F) o chiudere (o): - - - + Create B-spline B-spline - + Bezier curve has been closed La curva di Bézier è stata chiusa - - Pick first point: - Scegliere il primo punto: - - - - Pick opposite point: - Scegliere il punto opposto: - - - - Pick center point: - Scegliere il punto centrale: - - - - Pick radius: - Specificare il raggio: - - - - Pick start angle: - Scegliere l'angolo iniziale: - - - - Pick aperture: - Scegliere l'apertura: - - - - Aperture angle: - Angolo di apertura: - - - - Pick location point: - Scegliere il punto di localizzazione: - - - + Edges don't intersect! I bordi non si intersecano! - + Pick ShapeString location point: Sceglire un punto per posizionare ShapeString: - + Select an object to move Selezionare un oggetto da spostare - - Pick start point: - Specificare il punto iniziale: - - - - Pick end point: - Specificare il punto finale: - - - + Select an object to rotate Selezionare un oggetto da ruotare - - Pick rotation center: - Specificare il centro di rotazione: - - - - Pick base angle: - Selezionare l'angolo iniziale: - - - - Pick rotation angle: - Selezionare l'angolo di rotazione: - - - + Select an object to offset Selezionare un oggetto da sfalsare - + Offset only works on one object at a time Offset funziona solo su un oggetto alla volta - + Sorry, offset of Bezier curves is currently still not supported Siamo spiacenti, l'offset delle curve di Bézier non è ancora supportato - - Pick distance: - Scegliere la distanza: - - - + Select an object to stretch Selezionare un oggetto da stirare - - Pick first point of selection rectangle: - Specificare il primo punto del rettangolo di selezione: - - - - Pick opposite point of selection rectangle: - Specificare il punto opposto del rettangolo di selezione: - - - - Pick start point of displacement: - Specificare il punto iniziale dello spostamento: - - - - Pick end point of displacement: - Specificare il punto finale dello spostamento: - - - + Turning one Rectangle into a Wire - Convertire un rettangolo in un Wire + Convertire un rettangolo in una polilinea - + Select an object to join Selezionare un oggetto da unire - + Join Congiungi - + Select an object to split Selezionare un oggetto da dividere - + Select an object to upgrade Selezionare un oggetto da promuovere - + Select object(s) to trim/extend Selezionare l'oggetto(i) da accorciare o estendere - + Unable to trim these objects, only Draft wires and arcs are supported Impossibile tagliare o estendere questi oggetti, sono supportati solo polilinee e archi di Draft - + Unable to trim these objects, too many wires Impossibile tagliare o estendere questi oggetti, troppi contorni - + These objects don't intersect Questi oggetti non si intersecano - + Too many intersection points Troppi punti di intersezione - + Select an object to scale Selezionare un oggetto da scalare - - Pick base point: - Specificare il punto base: - - - - Pick reference distance from base point: - Scegliere la distanza di riferimento dal punto base: - - - - Pick new distance from base point: - Scegliere una nuova distanza dal punto base: - - - + Select an object to project Selezionare un oggetto da proiettare - - This object type is not editable - Questo tipo di oggetto non è modificabile - - - + Please select only one object - Si prega di selezionare un solo oggetto + Selezionare un solo oggetto - + Select a Draft object to edit Selezionare un oggetto Draft da modificare - + Active object must have more than two points/nodes L'oggetto attivo deve avere più di due punti/nodi - + Endpoint of BezCurve can't be smoothed Il punto finale di una curva di Bezier non può essere levigato - + Select an object to convert Seleziona un oggetto da convertire - + Select an object to array Seleziona un oggetto per la serie - + Please select base and path objects - Selezionare l'oggetto di base e il percorso + Selezionare l'oggetto base e il tracciato - + Please select base and pointlist objects Selezionare l'oggetto base e la lista di punti - + Select an object to clone Seleziona un oggetto da clonare - + Select face(s) on existing object(s) Selezionare facce su oggetti esistenti - + Select an object to mirror Selezionare un oggetto da specchiare - - Pick start point of mirror line: - Specificare il punto iniziale della linea speculare: - - - - Pick end point of mirror line: - Specificare il punto finale della linea speculare: - - - + This tool only works with Wires and Lines - Questo strumento funziona solo con wire e linee - - - - Pick target point: - Specificare il punto di destinazione: - - - - Pick endpoint of leader line: - Scegliere il punto finale della linea guida: - - - - Pick text position: - Scegliere la posizione del testo: + Questo strumento funziona solo con polilinee e linee @@ -4300,66 +4293,364 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Convertitore di File ODA (precedentemente Teigha) non trovato, il supporto DWG è disabilitato - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s condivide una base con %d altri oggetti. Controllare se si vuole modificare questo. Subelement mode - Subelement mode + Modalità sottoelemento - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Cambia il raggio e modifica gli archi - + Modify subelements - Modify subelements + Modifica i sottoelementi - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Se selezionato, saranno modificati i sottoelementi invece degli oggetti completi - + CubicBezCurve - CubicBezCurve + Curva di Bezier cubica - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Alcuni sottoelementi non possono essere spostati. - + Scale Scala - + Some subelements could not be scaled. - Some subelements could not be scaled. + Alcuni sottoelementi non possono essere scalati. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + Lo schizzo di base del muro è troppo complesso per modificarlo: si consiglia di modificare direttamente lo schizzo + + + + Top + Dall'alto + + + + Front + Di fronte + + + + Side + Lato + + + + Current working plane + Piano di lavoro corrente + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatica + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotazione + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Selezionare un oggetto da modificare + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Pescaggio + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilità + + + + Wire tools + Strumenti Polilinea + + + + Snapping + Aggancio diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index ce68023ded..e2365b9fdc 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index f572f69d49..928f55e4ea 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern ハッチパターンを定義 - + Sets the size of the pattern パターンのサイズを設定 - + Startpoint of dimension 寸法の始点 - + Endpoint of dimension 寸法の終点 - + Point through which the dimension line passes 寸法線が通過する点 - + The object measured by this dimension この寸法で測定するオブジェクト - + The geometry this dimension is linked to この寸法がリンクされているジオメトリー - + The measurement of this dimension この寸法の大きさ - + For arc/circle measurements, false = radius, true = diameter 円弧/円の測定。false = 半径、true = 直径。 - + Font size フォントサイズ - + The number of decimals to show 表示する小数点以下の桁数 - + Arrow size 矢印のサイズ - + The spacing between the text and the dimension line テキストと寸法線との間隔 - + Arrow type 矢印のタイプ - + Font name フォント名 - + Line width ライン幅 - + Line color 線の色 - + Length of the extension lines 寸法補助線の長さ - + Rotate the dimension arrows 180 degrees 寸法矢印を180度回転 - + Rotate the dimension text 180 degrees 寸法テキストを180度回転 - + Show the unit suffix 単位表記を表示 - + The position of the text. Leave (0,0,0) for automatic position テキスト位置。自動配置の場合は (0,0,0) としてください。 - + Text override. Use $dim to insert the dimension length テキストのオーバーライド。寸法長さを挿入するには$dimを使用。 - + A unit to express the measurement. Leave blank for system default 測定表示の単位。システムのデフォルトを使用する場合は空白のままにしてください。 - + Start angle of the dimension 寸法の開始角度 - + End angle of the dimension 寸法の終了角度 - + The center point of this dimension この寸法の中心点 - + The normal direction of this dimension この寸法の法線方向 - + Text override. Use 'dim' to insert the dimension length テキストのオーバーライド。寸法長さを挿入するには「dim」を使用。 - + Length of the rectangle 四角形の長さ - + Radius to use to fillet the corners 角のフィレットで使用する半径 - + Size of the chamfer to give to the corners 角の面取りのサイズ - + Create a face 面を作成 - + Defines a texture image (overrides hatch patterns) テクスチャイメージを定義（ハッチングパターンをオーバライド） - + Start angle of the arc 円弧の開始角度 - + End angle of the arc (for a full circle, give it same value as First Angle) 円弧の終了角度（完全な円の場合、最初の角度と同じ値を設定） - + Radius of the circle 円の半径 - + The minor radius of the ellipse 楕円の短半径 - + The major radius of the ellipse 楕円の長半径 - + The vertices of the wire ワイヤーの頂点 - + If the wire is closed or not ワイヤーが閉じているかどうか - + The start point of this line この線の始点 - + The end point of this line この線の終点 - + The length of this line この線の長さ - + Create a face if this object is closed このオブジェクトが閉じている場合、面を作成 - + The number of subdivisions of each edge 各エッジの再分割数 - + Number of faces 面の数 - + Radius of the control circle 制御円の半径 - + How the polygon must be drawn from the control circle 制御円から多角形を描く方法 - + Projection direction 投影方向 - + The width of the lines inside this object このオブジェクト内部の線の幅 - + The size of the texts inside this object このオブジェクト内部のテキストの幅 - + The spacing between lines of text テキストの行間隔 - + The color of the projected objects 投影オブジェクトの色 - + The linked object リンクされたオブジェクト - + Shape Fill Style シェイプの塗りつぶしのスタイル - + Line Style 線のスタイル - + If checked, source objects are displayed regardless of being visible in the 3D model チェックされている場合、ソースオブジェクトが3Dモデル内で表示されているかどうかに関わらず表示されます。 - + Create a face if this spline is closed このスプラインが閉じている場合、面を作成 - + Parameterization factor パラメーター化係数 - + The points of the Bezier curve ベジエ曲線の点 - + The degree of the Bezier function ベジエ関数の次数 - + Continuity 続行 - + If the Bezier curve should be closed or not ベジエ曲線を閉じるかどうか。 - + Create a face if this curve is closed この曲線が閉じている場合、面を作成 - + The components of this block このブロックのコンポーネント - + The base object this 2D view must represent この2Dビューが表現する必要のあるベースオブジェクト - + The projection vector of this object このオブジェクトの投影ベクトル - + The way the viewed object must be projected 表示オブジェクトの投影方向 - + The indices of the faces to be projected in Individual Faces mode 個別面モードで投影される面のインデックス - + Show hidden lines 隠線を表示 - + The base object that must be duplicated ベースオブジェクトが重複しています。 - + The type of array to create 作成する列のタイプ - + The axis direction 軸方向 - + Number of copies in X direction X方向のコピー数 - + Number of copies in Y direction Y方向のコピー数 - + Number of copies in Z direction Z方向のコピー数 - + Number of copies コピー数 - + Distance and orientation of intervals in X direction X方向の区間の距離と向き - + Distance and orientation of intervals in Y direction Y方向の区間の距離と向き - + Distance and orientation of intervals in Z direction Z方向の区間の距離と向き - + Distance and orientation of intervals in Axis direction 軸方向の区間の距離と向き - + Center point 中心点 - + Angle to cover with copies コピーを敷きつめる角度 - + Specifies if copies must be fused (slower) コピー同士を結合するかどうかを指定（処理が遅くなります）。 - + The path object along which to distribute objects オブジェクトを配置する経路を表すパスオブジェクト - + Selected subobjects (edges) of PathObj パスオブジェクトの選択したサブオブジェクト（エッジ） - + Optional translation vector オプションの平行移動ベクトル - + Orientation of Base along path ベースのパスに沿った向き - + X Location X位置 - + Y Location Y位置 - + Z Location Z位置 - + Text string テキスト文字列 - + Font file name フォントファイル名 - + Height of text テキストの高さ - + Inter-character spacing 文字間隔 - + Linked faces リンクされた面 - + Specifies if splitter lines must be removed 分割線を削除する必要があるかどうかを指定 - + An optional extrusion value to be applied to all faces すべての面に適用するオプションの押し出し値 - + Height of the rectangle 四角形の高さ - + Horizontal subdivisions of this rectangle この四角形の水平方向の細分割数 - + Vertical subdivisions of this rectangle この四角形の垂直方向の細分割数 - + The placement of this object このオブジェクトの配置 - + The display length of this section plane この断面平面の表示長さ - + The size of the arrows of this section plane この断面平面の矢印のサイズ - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location カットラインモード、カットフェイスモードでカット位置の面を残します。 - + The base object is the wire, it's formed from 2 objects ベースオブジェクトは2つのオブジェクトから形成されたワイヤーです。 - + The tool object is the wire, it's formed from 2 objects ツールオブジェクトは2つのオブジェクトから形成されたワイヤーです。 - + The length of the straight segment 直線セグメントの長さ - + The point indicated by this label このラベルで指し示される点 - + The points defining the label polyline ラベルポリラインを定義する点 - + The direction of the straight segment 直線セグメントの方向 - + The type of information shown by this label このラベルによって表示される情報の種類 - + The target object of this label このラベルの対象オブジェクト - + The text to display when type is set to custom 種類がカスタムに設定されている場合に表示するテキスト - + The text displayed by this label このラベルで表示されるテキスト - + The size of the text テキストのサイズ - + The font of the text テキストのフォント - + The size of the arrow 矢印のサイズ - + The vertical alignment of the text テキストの垂直方向の位置 - + The type of arrow of this label このラベルの矢印の種類 - + The type of frame around the text of this object このオブジェクトのテキストを囲む枠の種類 - + Text color テキストの色 - + The maximum number of characters on each line of the text box テキストボックスの各行の最大文字数 - + The distance the dimension line is extended past the extension lines 寸法線が寸法補助線を超えて伸びる距離 - + Length of the extension line above the dimension line 寸法線の上の寸法補助線の長さ - + The points of the B-spline B-スプラインの点 - + If the B-spline is closed or not B-スプラインが閉じているかどうか - + Tessellate Ellipses and B-splines into line segments 楕円、B-スプラインを線分に分割 - + Length of line segments if tessellating Ellipses or B-splines into line segments 楕円、B-スプラインを曲線の断片に分割する場合のの曲線の長さ - + If this is True, this object will be recomputed only if it is visible True の場合、このオブジェクトは表示されている場合にのみ再計算されます。 - + Base Base - + PointList 点リスト - + Count 総数 - + The objects included in this clone このクローンに含まれるオブジェクト - + The scale factor of this clone このクローンの拡大率 - + If this clones several objects, this specifies if the result is a fusion or a compound 複数オブジェクトがクローンされる場合に結果を結合するか、コンパウンドにするかを指定 - + This specifies if the shapes sew シェイプの縫い合わせを行うかどうか指定 - + Display a leader line or not 引き出し線を表示するかどうか - + The text displayed by this object このオブジェクトで表示されるテキスト - + Line spacing (relative to font size) 行間隔(フォント サイズに対する相対値) - + The area of this object - The area of this object + このオブジェクトの面積 - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + ワイヤーの終端に寸法記号を表示します - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + 壁と構造物を同じ種類とマテリアルに融合 + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope 傾斜 - + Scale 拡大縮小 - + Writing camera position カメラ位置を書き込み - + Writing objects shown/hidden state オブジェクトの表示/非表示の状態を書き込み - + X factor X係数 - + Y factor Y係数 - + Z factor Z係数 - + Uniform scaling 均一スケール - + Working plane orientation 作業平面の向き @@ -780,20 +815,25 @@ from menu Tools -> Addon Manager メニューのツール→アドオンマネージャーからdxfライブラリーアドオンを手動でインストールしてください。 - + This Wire is already flat このワイヤーは既にフラットです - + Pick from/to points 点から選択 - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down 選択されたワイヤー/線に設定する傾斜: 0=水平、1=上方向に45°、-1=下方向に45° + + + Create a clone + クローンを作成 + DraftShapeStringGui @@ -845,28 +885,28 @@ from menu Tools -> Addon Manager Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + 座標を入力するかマウスで点を選択。 Reset 3d point selection - Reset 3d point selection + 3D点選択をリセット Reset Point - Reset Point + ポイントリセット Draft_AddConstruction - + Add to Construction group 補助グループに追加 - + Adds the selected objects to the Construction group 選択したオブジェクトを補助グループに追加 @@ -874,12 +914,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point 点の追加 - + Adds a point to an existing Wire or B-spline 既存の連線またはB-スプラインに点を追加 @@ -887,12 +927,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... グループに移動... - + Moves the selected object(s) to an existing group 選択したオブジェクトを既存のグループに移動 @@ -900,12 +940,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style 現在のスタイルを適用する - + Applies current line width and color to selected objects 現在の線の幅と色を選択したオブジェクトに適用 @@ -913,46 +953,46 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc 円弧 - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + 中心点と半径で円弧を作成します。 CTRL はスナップ、SHIFT は拘束 Draft_ArcTools - + Arc tools - Arc tools + 円弧ツール Draft_Arc_3Points - + Arc 3 points - Arc 3 points + 3点円弧 - + Creates an arc by 3 points - Creates an arc by 3 points + 3点で円弧を作成 Draft_Array - + Array 配列 - + Creates a polar or rectangular array from a selected object 選択したオブジェクトから円形または矩形の配列を作成します @@ -960,12 +1000,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup オートグループ - + Select a group to automatically add all Draft & Arch objects to 全てのDraft、Archオブジェクトを自動追加するグループを選択 @@ -973,12 +1013,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-スプライン - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain 複数点からなるB-スプラインを作成。[Ctrl]でスナップ、[Shift]で拘束。 @@ -986,12 +1026,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve ベジェ曲線 - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain ベジエ曲線を作成します。[Ctrl]でスナップ、[Shift]で拘束。 @@ -999,20 +1039,20 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + ベジェツール Draft_Circle - + Circle 円 - + Creates a circle. CTRL to snap, ALT to select tangent objects 円を作成します。[Ctrl]でスナップ、[Alt]で接するオブジェクトを選択 @@ -1020,12 +1060,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone クローン - + Clones the selected object(s) 選択されたオブジェクト（複数可）のクローンを作成 @@ -1033,12 +1073,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line 閉じた線 - + Closes the line being drawn 製図中の線を閉じます @@ -1046,27 +1086,26 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + 3次ベジェ曲線 - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + 3次ベジェ曲線を作成します。クリック＆ドラッグで制御点を定義します。CTRL はスナップ、SHIFT は拘束 Draft_DelPoint - + Remove Point 点の削除 - + Removes a point from an existing Wire or B-spline 既存の連線またはB-スプラインから点を削除 @@ -1074,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension 寸法 - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 寸法を記入します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でセグメントを選択 @@ -1087,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade ダウングレード - + Explodes the selected objects into simpler objects, or subtracts faces 選択したオブジェクトをより単純な形状に分解、または面を減算します @@ -1100,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch ドラフトからスケッチへ - + Convert bidirectionally between Draft and Sketch objects ドラフトオブジェクトとスケッチオブジェクトを相互に変換します @@ -1113,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing 図面 - + Puts the selected objects on a Drawing sheet 選択したオブジェクトを図面上に配置 @@ -1126,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit 編集 - + Edits the active object アクティブなオブジェクトを編集します。 @@ -1139,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + 改善された編集 - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + 選択オブジェクトの編集 Draft_Ellipse - + Ellipse 楕円 - + Creates an ellipse. CTRL to snap 楕円を作成します。[Ctrl]でスナップ。 @@ -1170,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder フェイスバインダー - + Creates a facebinder object from selected face(s) 選択された面(複数可)からフェイスバインダー・オブジェクトを作成 @@ -1183,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line フィニッシュ ライン - + Finishes a line without closing it 線を閉じずに終了します @@ -1196,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension 寸法を反転 - + Flip the normal direction of a dimension 寸法の法線方向を反転 @@ -1209,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal 修復 - + Heal faulty Draft objects saved from an earlier FreeCAD version 旧FreeCAD バージョンに保存されている、 欠陥のあるドラフト オブジェクトを修復します @@ -1222,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join ジョイン - + Joins two wires together 2つのワイヤーを接合 @@ -1235,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label ラベル - + Creates a label, optionally attached to a selected object or element ラベルを作成し、必要に応じて選択したオブジェクトまたは要素に添付 + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line 直線 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain ２点を指定して線を作成します。[Ctrl]でスナップ、[Shift]で拘束 @@ -1261,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror 鏡像コピー - + Mirrors the selected objects along a line defined by two points 2点で定義された線に沿って選択したオブジェクトを鏡像コピー @@ -1274,25 +1321,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move 移動 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + 2点間で選択したオブジェクトを移動します。[Ctrl] でスナップ、[Shift] で拘束。 Draft_Offset - + Offset オフセット - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy アクティブなオブジェクトをオフセットします。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -1300,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. 選択したパスに沿って選択したオブジェクトのコピーを作成します。 @@ -1313,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point 点 - + Creates a point object 点を作成します。 @@ -1326,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. ポイントの位置に、選択したオブジェクトのコピーを作成します。 @@ -1339,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon 多角形 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 正多角形を作成します。[Ctrl]でスナップ、[Shift]で拘束。 @@ -1352,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle 四角形 - + Creates a 2-point rectangle. CTRL to snap 2 点を指定し四角形を作成します。[Ctrl]でスナップ @@ -1365,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate 回転 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 選択したオブジェクトを回転します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -1378,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale 拡大縮小 - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 選択したオブジェクトを基準点を中心に拡大します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -1391,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group グループを選択 - + Selects all objects with the same parents as this group このグループと同じ親を持つすべてのオブジェクトを選択します @@ -1404,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane 面を選択する - + Select a working plane for geometry creation ジオメトリを作成する作業面を選択する @@ -1417,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane 現在の作業平面からプロキシーオブジェクトを作成 - + Create Working Plane Proxy 作業平面プロキシを作成 @@ -1430,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2Dビュー形状 - + Creates Shape 2D views of selected objects 選択したオブジェクトの2Dビュー形状を作成 @@ -1443,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... テキストからシェイプへ... - + Creates text string in shapes. テキスト文字列をシェイプとして作成 @@ -1456,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar スナップバーを表示 - + Shows Draft snap toolbar ドラフトスナップ ツールバーを表示 @@ -1469,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope 傾斜を設定 - + Sets the slope of a selected Line or Wire 選択した線またはワイヤーに傾斜を設定 @@ -1482,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles 角度 - + Snaps to 45 and 90 degrees points on arcs and circles 円弧や円上の点を、45度および90度にスナップさせる @@ -1495,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center 中心 - + Snaps to center of circles and arcs 円、円弧の中心にスナップ @@ -1508,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions 寸法 - + Shows temporary dimensions when snapping to Arch objects Archオブジェクトにスナップする場合は仮寸法を表示 @@ -1521,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint 端点 - + Snaps to endpoints of edges エッジの端点にスナップ @@ -1534,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension 延長線上 - + Snaps to extension of edges エッジの延長にスナップ @@ -1547,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid グリッド - + Snaps to grid points グリッド点にスナップ @@ -1560,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection 共通集合 - + Snaps to edges intersections エッジの交点にスナップ @@ -1573,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off オン/オフを切り替え - + Activates/deactivates all snap tools at once 全てのスナップツールを同時にアクティブ化/非アクティブ化 - + Lock ロック @@ -1591,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint 中点 - + Snaps to midpoints of edges エッジの中点にスナップ @@ -1604,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest 最近接 - + Snaps to nearest point on edges エッジ上の最も近い点にスナップ @@ -1617,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho 正射投影 - + Snaps to orthogonal and 45 degrees directions ４５度の方向でスナップさせる @@ -1630,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel 平行 - + Snaps to parallel directions of edges エッジの平行方向にスナップ @@ -1643,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular 垂直 - + Snaps to perpendicular points on edges エッジ上の垂直点にスナップ @@ -1656,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special スペシャル - + Snaps to special locations of objects オブジェクトの特別位置にスナップ @@ -1669,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane 作業平面 - + Restricts the snapped point to the current working plane スナップされる点を現在の作業平面に制限 @@ -1682,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split スプリット - + Splits a wire into two wires ワイヤーを2つのワイヤーに分割 @@ -1695,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch ストレッチ - + Stretches the selected objects 選択したオブジェクトを伸縮 @@ -1708,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text テキスト - + Creates an annotation. CTRL to snap 注釈を作成します。[Ctrl]でスナップ @@ -1721,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. 次のオブジェクトのコンストラクションモードを切り替えます。 - + Toggle Construction Mode 補助モードの切り替え @@ -1734,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode 続行モードに切り替え - + Toggles the Continue Mode for next commands. 次のコマンドを続行モードに切り替える。 @@ -1747,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode 表示モードを切り替える - + Swaps display mode of selected objects between wireframe and flatlines 選択したオブジェクトの表示モードを変更する @@ -1760,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid グリッドの切り替え - + Toggles the Draft grid on/off ドラフトのグリッドの オン/オフを切り替えます - + Grid グリッド - + Toggles the Draft grid On/Off ドラフトのグリッドの オン/オフを切り替え @@ -1783,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex トリメックス - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 選択したオブジェクトをトリムまたは延長するか、もしくは単一の面を押し出します。[Ctrl]でスナップ、[Shift]で現在のセグメントまたは垂直方向に拘束、[Alt]で反転 @@ -1796,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment 最後のセグメントを元に戻す - + Undoes the last drawn segment of the line being drawn 描画中の線で最後に描いたセグメントを元に戻す @@ -1809,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade アップグレード - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces 選択したオブジェクトをひとつに結合、または閉じた連線を塗り潰された面に変換、または面を統合 - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - VisGroup を追加 - - Draft_Wire - - DWire - Dワイヤー + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - 複数の頂点のドラフトワイヤー(Dワイヤー)を作成します。[Ctrl]でスナップ、[SHIFT]で拘束 + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline ワイヤーからB-スプラインへ - + Converts between Wire and B-spline ワイヤーとB-スプラインを相互変換 @@ -1861,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings 一般的なドラフトの設定 - + This is the default color for objects being drawn while in construction mode. 補助モード中に描画されるオブジェクトのデフォルトの色 - + This is the default group name for construction geometry 補助ジオメトリーのデフォルトグループ名です。 - + Construction コンストラクション @@ -1886,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainセッションをまたいで現在の色と線幅を保存 - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode チェックされている場合、別コマンドでもコピーモードが継続します。それ以外の場合、コマンドは常に非コピーモードで開始します。 - + Global copy mode グローバルコピーモード - + Default working plane デフォルトの作業面 - + None なし - + XY (Top) XY (平面図) - + XZ (Front) XZ (正面図) - + YZ (Side) YZ (側面図) @@ -1984,12 +2018,12 @@ such as "Arial:Bold" 全般的な設定 - + Construction group name 補助グループ名 - + Tolerance 公差 @@ -2014,22 +2048,22 @@ such as "Arial:Bold" ここでの標準のドラフト ハッチ パターンを追加することができます。 <pattern>の定義を含む SVG ファイルが保存されているディレクトリを指定してください。 - + Draft interface mode ドラフトのインタフェイスモード - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction ドラフトモジュール動作時のUIモードです: ツールバーモードでは全てのドラフト設定が分離ツールバーに配置されます。一方、タスクバーモードではFreeCADのタスクビューシステムが全てのユーザー入力のために使用されます。 - + Toolbar ツールバー - + Taskview タスクビュー @@ -2059,12 +2093,12 @@ such as "Arial:Bold" Altモード - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. 通常はオブジェクトのコピー後にはコピーが選択されます。このオプションをチェックすると代わりに元オブジェクトが選択されます。 - + Select base objects after copying コピー後に元オブジェクトを選択 @@ -2099,7 +2133,7 @@ such as "Arial:Bold" 主線は太めに描画されます。主線間を何スクエアにするかここに指定してください。 - + Internal precision level 内部の精度レベル @@ -2214,12 +2248,12 @@ such as "Arial:Bold" 白い線の色を黒に変換 - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. ここをチェックすると、ドラフトツールはドラフトオブジェクトの代わりに利用可能な部品プリミティブを作成します。 - + Use Part Primitives when available 利用可能な場合はプリミティブ部品を使用 @@ -2239,12 +2273,7 @@ such as "Arial:Bold" 常にスナップ (スナップモードを無効にする) - - Construction geometry - 補助ジオメトリー - - - + Construction geometry color 補助ジオメトリーの色 @@ -2384,7 +2413,7 @@ such as "Arial:Bold" フォントファイルを選択 - + Fill objects with faces whenever possible できるだけオブジェクトの面を塗りつぶす @@ -2621,7 +2650,7 @@ such as "Arial:Bold" Use legacy python importer - 過去のPythonインポーターを使用 + 過去の Python インポーターを使用 @@ -2674,7 +2703,7 @@ such as "Arial:Bold" 自動更新 (旧インポート機能のみ) - + Prefix labels of Clones with: クローンの接頭ラベル： @@ -2713,7 +2742,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: SVGオブジェクトの色をFreeCADにインポートするための選択された方法です。 - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe チェックされている場合、オブジェクトはデフォルトと同様、塗りつぶし表示されます。それ以外の場合はワイヤーフレーム表示されます。 @@ -2793,17 +2822,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: チェックされている場合、同じレイヤーのオブジェクトがドラフトブロックとして連結されて表示が高速になりますが、編集は難しくなります。 - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - これがオンの場合、ドラフト コマンドを実行時に出力ウィンドウで手順を表示 - - - - Verbose command line mode - 詳細なコマンド ライン モード - - - + When drawing lines, set focus on Length instead of X coordinate ドローイングラインの場合、X座標の代わりに長さにフォーカスを設定 @@ -2883,710 +2902,857 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: スプラインの最大セグメント数: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + 内部での座標操作で使用される小数点以下の桁数（例. 3 = 0.001）。通常、FreeCAD ユーザーには6から8の間の値が 最も適しています。 - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + これは閾値を使用する機能で使用される値です。 +この値よりも小さい差しかない値は同じものとして扱われます。上記の精度レベルが両方を制御するようになるとこの値は使用されなくなります。 Use legacy python exporter - Use legacy python exporter + 過去の Python エクスポーターを使用 + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + 補助ジオメトリー + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + 相対 + + + + R + R + + + + Continue + 続行 + + + + T + T + + + + Close + 閉じる + + + + O + O + + + + Copy + コピー + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + 塗りつぶし + + + + L + L + + + + Exit + 終了 + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + 長さ + + + + H + H + + + + Wipe + ワイプ + + + + W + W + + + + Set WP + WPを設定 + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + X 制限 + + + + X + X + + + + Restrict Y + Y 制限 + + + + Y + Y + + + + Restrict Z + Z 制限 + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap ドラフトスナップ - - - Draft creation tools - ドラフト作成ツール - - - - Draft modification tools - ドラフト修正ツール - - - - Utilities - ユーティリティ - - - - Wire tools - 連線ツール - - - - Snapping - スナップ - draft - + not shape found シェイプが見つかりません - + All Shapes must be co-planar シェイプは全て同一平面上にある必要があります。 - + The given object is not planar and cannot be converted into a sketch. 指定されたオブジェクトは平面およびスケッチに変換することができません。 - + Unable to guess the normal direction of this object このオブジェクトの法線方向を決定できませんでした。 - + Draft Command Bar ドラフトコマンドバー - + Toggle construction mode 補助モードの切り替え - + Current line color 現在の線の色 - + Current face color 現在の面の色 - + Current line width 現在の線幅 - + Current font size 現在のフォントサイズ - + Apply to selected objects 選択したオブジェクトに適用します。 - + Autogroup off オートグループ無効 - + active command: アクティブコマンド: - + None なし - + Active Draft command アクティブドラフトコマンド - + X coordinate of next point 次の点の X 座標 - + X X - + Y Y - + Z Z - + Y coordinate of next point 次の点の Y 座標 - + Z coordinate of next point 次の点の Z 座標 - + Enter point 点の入力 - + Enter a new point with the given coordinates 指定された座標に新しい点を入力 - + Length 長さ - + Angle 角度 - + Length of current segment 現在のセグメントの長さ - + Angle of current segment 現在のセグメントの角度 - + Radius 半径 - + Radius of Circle 円の半径 - + If checked, command will not finish until you press the command button again チェックされている場合、再びコマンドボタンを押すまでコマンドが終了しなくなります - + If checked, an OCC-style offset will be performed instead of the classic offset チェックされている場合、従来のオフセットの代わりにくOCC-スタイルのオフセットが行われます - + &OCC-style offset OCC スタイル オフセット (&O) - + Add points to the current object 現在のオブジェクトに点を追加します - + Remove points from the current object 現在のオブジェクトから点を削除します - + Make Bezier node sharp ベジエ曲線の頂点を鋭角にする - + Make Bezier node tangent ベジエ曲線の頂点を接線にする - + Make Bezier node symmetric ベジエ曲線の頂点を対称にする - + Sides 側面 - + Number of sides 辺の数 - + Offset オフセット - + XY (top) XY (上面図) - - Select XY plane - XY 平面を選択 - - - + XZ (front) XZ (正面図) - - Select XZ plane - XZ 平面を選択 - - - + YZ (side) YZ (側面図) - - Select YZ plane - YZ 平面を選択 - - - + View 表示 - - Select plane perpendicular to the current view - 現在のビューに垂直な面を選択する。 - - - + Auto 自動 - - Do not project points to a drawing plane - 描画平面に点を投影しないでください - - - + Text string to draw 描画するテキスト文字列 - + String 文字列 - + Height of text テキストの高さ - + Height 高さ - + Intercharacter spacing 文字間隔 - + Tracking トラッキング - + Full path to font file: フォントファイルのフルパス: - + Open a FileChooser for font file ファイル選択ダイアログを開いてフォントファイルを選択 - + Grid spacing グリッド間隔 - + The spacing between the grid lines グリッド線の間隔 - + Main line every 主線ごと - + The number of lines between main lines 主線間の線の数 - + Center plane on view ビューの中心面 - - Select Plane - 平面選択 - - - + Line 直線 - + DWire Dワイヤー - + Circle 円 - + Center X 中心X - + Arc 円弧 - + Point 点 - + Label ラベル - + Distance 距離 - + Trim トリム - + Pick Object オブジェクトを選択 - + Edit 編集 - + Global X グローバル座標 X - + Global Y グローバル座標 Y - + Global Z グローバル座標 Z - + Local X ローカル座標 X - + Local Y ローカル座標 Y - + Local Z ローカル座標 Z - + Invalid Size value. Using 200.0. サイズの値が無効です。　200.0 を使ってください。 - + Invalid Tracking value. Using 0. トラッキングの値が無効です。　0 を使ってください。 - + Please enter a text string. 文字を入力してください。 - + Select a Font file フォントファイルを選択 - + Please enter a font file. フォントファイルを入力してください。 - + Autogroup: オートグループ: - + Faces 面 - + Remove 削除 - + Add 追加 - + Facebinder elements フェイスバインダー要素 - + Create Line 線分を作成 - - Pick next point: - - 次の点を選択: - - - - + Convert to Wire 連線に変換 - + BSpline B-スプライン - + BezCurve ベジェ曲線 - + Create BezCurve ベジェ曲線を作成 - + Rectangle 四角形 - + Create Plane 平面を作成 - + Create Rectangle 矩形を作成 - + Create Circle 円を作成 - + Create Arc 円弧を作成 - + Start Angle 開始角度 - + Aperture 視野口径 - + Polygon 多角形 - + Create Polygon 多角形を作成 - + Ellipse 楕円 - + Create Ellipse 楕円を作成 - + Text テキスト - + Create Text テキストを作成 - + Dimension 寸法 - + Create Dimension 寸法の作成 - + ShapeString シェイプストリング - + Create ShapeString シェイプストリングを作成 - + Copy コピー - + Move 移動 - + Change Style スタイルの変更 - + Rotate 回転 - - Cannot offset this object type - - このオブジェクトの種類はオフセットすることができません。 - - - + Stretch ストレッチ - + Upgrade アップグレード - + Downgrade ダウングレード - + Selection is not a Knot 節点が選択されていません - + Convert to Sketch スケッチに変換 - + Convert to Draft ドラフトに変換 - + Convert 変換 - + Array 配列 - + Create Point 点を作成 - + Mirror 鏡像コピー - + &Draft ドラフト(&D) @@ -3610,179 +3776,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer FreeCADでこれらライブラリーのダウンロードを有効にするためにYesを選択します。 - + Draft.makeBSpline: not enough points Draft.makeBSpline: 点の数が不十分 - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: 等しい端点を強制的につなぐ - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: 無効な頂点リスト - + No object given オブジェクトが指定されていません - + The two points are coincident 2点が一致しています - + Found groups: closing each open object inside グループを見つけました: 内部の開いているオブジェクトを閉じます - + Found mesh(es): turning into Part shapes メッシュが見つかりました：パート形状へ変換します - + Found 1 solidifiable object: solidifying it ソリッド化可能なオブジェクトが1つ見つかりました：ソリッド化します - + Found 2 objects: fusing them オブジェクトが2つ見つかりました：結合します - + Found several objects: creating a shell 複数のオブジェクトが見つかりました：シェルを作成します - + Found several coplanar objects or faces: creating one face 同一平面上にあるオブジェクトまたは面が見つかりました：ひとつの面を作成します - + Found 1 non-parametric objects: draftifying it 非パラメトリックなオブジェクトが1つ見つかりました：製図します - + Found 1 closed sketch object: creating a face from it 閉じたスケッチオブジェクトが1つ見つかりました：面を作成します - + Found 1 linear object: converting to line 線形オブジェクトが1つ見つかりました: 線分へ変換します - + Found closed wires: creating faces 閉じたワイヤーが見つかりました： 面を作成します - + Found 1 open wire: closing it 開いたワイヤーが1つ見つかりました：閉じます - + Found several open wires: joining them 複数の開いたワイヤーが見つかりました：結合します - + Found several edges: wiring them 複数のエッジが見つかりました：ワイヤーとして結合します - + Found several non-treatable objects: creating compound 複数の修復不能なオブジェクトが見つかりました：コンパウンドを作成します - + Unable to upgrade these objects. これらのオブジェクトはアップグレードできません。 - + Found 1 block: exploding it ブロックが1つ見つかりました：このブロックを分解 - + Found 1 multi-solids compound: exploding it コンパウンドが1つ見つかりました：このコンパウンドを分解 - + Found 1 parametric object: breaking its dependencies パラメトリックなオブジェクトが1つ見つかりました：依存関係を破棄します - + Found 2 objects: subtracting them オブジェクトが2つ見つかりました：減算を行います - + Found several faces: splitting them 複数の面が見つかりました：分割します - + Found several objects: subtracting them from the first one 複数のオブジェクトが見つかりました：最初の1つから残りを減算します - + Found 1 face: extracting its wires 面が1つ見つかりました：ワイヤーを抽出します - + Found only wires: extracting their edges ワイヤーのみ見つかりました：エッジを抽出します - + No more downgrade possible これ以上のダウングレードはできません - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry：最初/最後の点を一致させて曲線を閉じてください。ジオメトリーは更新されていません。 - + No point found ポイントが見つかりません。 - + ShapeString: string has no wires ShapeString: 文字列のワイヤーがありません。 - + Relative 相対 - + Continue 続行 - + Close 閉じる @@ -3827,7 +3993,7 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた Z 制限 - + Select edge エッジを選択 @@ -3842,7 +4008,7 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた 長さモード - + Wipe ワイプ @@ -3857,513 +4023,636 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた 循環的にオブジェクトにスナップ - + Check this to lock the current angle ここにチェックを入れると、現在の角度を拘束 - + Coordinates relative to last point or absolute 最後の点からの相対座標、または絶対座標 - + Filled 塗りつぶし - - Check this if the object should appear as filled, otherwise it will appear as wireframe - チェックされている場合、オブジェクトは塗りつぶし表示。それ以外の場合、ワイヤーフレーム表示。 - - - + Finish 完了 - + Finishes the current drawing or editing operation 現在の製図、または編集操作を終了 - + &Undo (CTRL+Z) 取り消し(Ctrl+Z) (&U) - + Undo the last segment 最後のセグメントを元に戻す - + Finishes and closes the current line 現在の線を閉じて終了 - + Wipes the existing segments of this line and starts again from the last point 直線の既存のセグメントを消去して最後の点から再開 - + Set WP WPを設定 - + Reorients the working plane on the last segment 最後のセグメントで作業平面を再設定 - + Selects an existing edge to be measured by this dimension 寸法を計測したいところの既存エッジを選択して下さい - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands チェックされている場合、オブジェクトは移動の代わりにコピーされます。設定 → Draft → グローバルコピーモード で次回以降のコマンドに対してこのモードを維持します。 - - options - オプション - - - + Default デフォルト - + Pick a face to define the drawing plane ドローイング平面を定義するための面を選択 - - First point: - 最初の点: - - - - Closing - 閉じる - - - + Create Wire ワイヤーを作成 - - Removing last point - 最後の点を削除 - - - - Next point: - 次の点: - - - - Restarting from - 次から再開 - - - + Unable to create a Wire from selected objects 選択したオブジェクトからワイヤを作成できません。 - + Spline has been closed スプラインは閉じられています。 - + Last point has been removed 最後の点が取り除かれています。 - - Pick next point, or Finish (shift-F) or close (o): - 次の点を選択、または終了（Shiftキー＋F）、閉じる（o）: - - - + Create B-spline B-スプラインを作成 - + Bezier curve has been closed ベジエ曲線は閉じています。 - - Pick first point: - 最初の点を選択: - - - - Pick opposite point: - 反対側の点を選択: - - - - Pick center point: - 中心点を選択: - - - - Pick radius: - 半径を選択: - - - - Pick start angle: - 開始角度を選択: - - - - Pick aperture: - 開口角を選択: - - - - Aperture angle: - 開口角: - - - - Pick location point: - 配置点を選択: - - - + Edges don't intersect! エッジが交差していません！ - + Pick ShapeString location point: シェイプストリングの配置点を選択: - + Select an object to move 移動するオブジェクトを選択 - - Pick start point: - 開始点を選択: - - - - Pick end point: - 終了点を選択: - - - + Select an object to rotate 回転するオブジェクトを選択 - - Pick rotation center: - 回転中心を選択: - - - - Pick base angle: - ベース角度を選択: - - - - Pick rotation angle: - 回転角を選択: - - - + Select an object to offset オフセットするオブジェクトを選択 - + Offset only works on one object at a time 一度にオフセットできるのは1つのオブジェクトだけです - + Sorry, offset of Bezier curves is currently still not supported 申し訳ありませんがベジエ曲線のオフセットは現在まだサポートされていません - - Pick distance: - 距離を選択: - - - + Select an object to stretch 伸縮するオブジェクトを選択 - - Pick first point of selection rectangle: - 選択矩形の最初の点を選択: - - - - Pick opposite point of selection rectangle: - 選択四角形の対角点を選択: - - - - Pick start point of displacement: - 移動の始点を選択: - - - - Pick end point of displacement: - 移動の終点を選択: - - - + Turning one Rectangle into a Wire 1 つの四角形をワイヤーへ変換 - + Select an object to join 接合するオブジェクトを選択 - + Join ジョイン - + Select an object to split 分割するオブジェクトを選択 - + Select an object to upgrade アップグレードするオブジェクトを選択 - + Select object(s) to trim/extend トリム/伸長するオブジェクトを選択 - + Unable to trim these objects, only Draft wires and arcs are supported これらのオブジェクトをトリムすることはできません。サポートされているのはドラフトのワイヤーと円弧のみです。 - + Unable to trim these objects, too many wires これらのオブジェクトはワイヤーが多すぎてトリミングできません - + These objects don't intersect これらのオブジェクトは交差してません - + Too many intersection points 交点が多すぎます - + Select an object to scale 拡大縮小縮小するオブジェクトを選択 - - Pick base point: - 基準点を選択: - - - - Pick reference distance from base point: - 基準点からの参照距離を選択: - - - - Pick new distance from base point: - 基準点からの新しい距離を選択: - - - + Select an object to project 投影するオブジェクトを選択 - - This object type is not editable - このオブジェクトタイプは編集できません - - - + Please select only one object オブジェクトを1つ選択してください - + Select a Draft object to edit 編集するDraftオブジェクトを選択 - + Active object must have more than two points/nodes アクティブオブジェクトは２つ以上の点またはノードが必要 - + Endpoint of BezCurve can't be smoothed ベジエ曲線の端点はスムージングできません - + Select an object to convert 変換するオブジェクトを選択 - + Select an object to array 整列させるオブジェクトを選択 - + Please select base and path objects ベースとパスオブジェクトを選択してください - + Please select base and pointlist objects ベースとポイントリストジェクトを選択してください - + Select an object to clone クローンするオブジェクトを選択 - + Select face(s) on existing object(s) 既存のオブジェクトの面を選択 - + Select an object to mirror 鏡像コピーするオブジェクトを選択 - - Pick start point of mirror line: - 対称線の始点を選択: - - - - Pick end point of mirror line: - 対称線の終点を選択: - - - + This tool only works with Wires and Lines このツールは連線と線でのみ動作します - - - Pick target point: - 対象点を選択: - - - - Pick endpoint of leader line: - 引き出し線の終点を選択: - - - - Pick text position: - テキスト位置を選択: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA （旧 Teigha）ファイルコンバーターが見つかりません。DWG サポートは無効になります。 - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s は %d 個の別のオブジェクトとベースを共有しています。本当に変更対象かを確認してください。 Subelement mode - Subelement mode + サブ要素モード - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + 編集している円弧の半径と角度を切り替え - + Modify subelements - Modify subelements + サブ要素を変更 - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + チェックされている場合、オブジェクト全体ではなくサブ要素が変更されます。 - + CubicBezCurve - CubicBezCurve + 3次ベジェ曲線 - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + 一部のサブ要素が移動できませんでした。 - + Scale 拡大縮小 - + Some subelements could not be scaled. - Some subelements could not be scaled. + 一部のサブ要素が拡大縮小できませんでした。 - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + 壁ベースのスケッチが複雑過ぎて編集できません: スケッチを直接編集してください。 + + + + Top + 上面図 + + + + Front + 正面図 + + + + Side + サイド + + + + Current working plane + 現在の作業平面 + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + 自動 + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + 回転 + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + 編集するオブジェクトを選択 + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + 喫水 + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + ユーティリティ + + + + Wire tools + 連線ツール + + + + Snapping + スナップ diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.qm b/src/Mod/Draft/Resources/translations/Draft_kab.qm index cf7844483d..378397696d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_kab.qm and b/src/Mod/Draft/Resources/translations/Draft_kab.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.ts b/src/Mod/Draft/Resources/translations/Draft_kab.ts index c195fdc2c9..58a29333c6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_kab.ts +++ b/src/Mod/Draft/Resources/translations/Draft_kab.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Defines a hatch pattern - + Sets the size of the pattern Sets the size of the pattern - + Startpoint of dimension Taneqqiḍt tamezwarut n tsekta - + Endpoint of dimension Taneqqiḍt taneggarut n tsekta - + Point through which the dimension line passes Point through which the dimension line passes - + The object measured by this dimension The object measured by this dimension - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter For arc/circle measurements, false = radius, true = diameter - + Font size Taille de police - + The number of decimals to show The number of decimals to show - + Arrow size Tehri n uneccab - + The spacing between the text and the dimension line The spacing between the text and the dimension line - + Arrow type Anaw n uneccab - + Font name Isem n tseftit - + Line width Largeur de ligne - + Line color Ini n yizirig - + Length of the extension lines Length of the extension lines - + Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees - + Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default A unit to express the measurement. Leave blank for system default - + Start angle of the dimension Start angle of the dimension - + End angle of the dimension End angle of the dimension - + The center point of this dimension The center point of this dimension - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Length of the rectangle - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Create a face - + Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) - + Start angle of the arc Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle Radius of the circle - + The minor radius of the ellipse The minor radius of the ellipse - + The major radius of the ellipse The major radius of the ellipse - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line The start point of this line - + The end point of this line The end point of this line - + The length of this line The length of this line - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Number of faces - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text The spacing between lines of text - + The color of the projected objects The color of the projected objects - + The linked object The linked object - + Shape Fill Style Shape Fill Style - + Line Style Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Afficher les lignes masquées - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Number of copies Number of copies - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Location - + Y Location Y Location - + Z Location Z Location - + Text string Text string - + Font file name Font file name - + Height of text Height of text - + Inter-character spacing Inter-character spacing - + Linked faces Linked faces - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object The placement of this object - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Azadur - + PointList PointList - + Count Nombre - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Sellum - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Add Point - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Apply Current Style - + Applies current line width and color to selected objects Applies current line width and color to selected objects @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Arc - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Array - + Creates a polar or rectangular array from a selected object Creates a polar or rectangular array from a selected object @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Tawinest - + Creates a circle. CTRL to snap, ALT to select tangent objects Creates a circle. CTRL to snap, ALT to select tangent objects @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Clone - + Clones the selected object(s) Clones the selected object(s) @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Close Line - + Closes the line being drawn Closes the line being drawn @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Remove Point - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Downgrade - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draft to Sketch - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Mise en plan - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Éditer - + Edits the active object Édite l'objet actif @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Crée une ellipse. CTRL pour aimanter @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Lier des faces - + Creates a facebinder object from selected face(s) Crée un objet unique en courbant la ou les surfaces sélectionnées @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Fak izirig - + Finishes a line without closing it Terminer la ligne sans la fermer @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Inverser le sens d’écriture d'une cote @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Réparer - + Heal faulty Draft objects saved from an earlier FreeCAD version Réparer les objets de type Draft défectueux enregistrés avec une version antérieure de FreeCAD @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Ligne - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crée une ligne par deux points. CTRL pour accrocher aux objets, Maj pour contraindre @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Miroir - + Mirrors the selected objects along a line defined by two points Effectue une symétrie en miroir des objets sélectionnés le long d'une ligne définie par deux points @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Déplacer - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Décale l'objet actif. CTRL pour accrocher, Maj pour contraindre, Alt pour copier @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Chemin pour série de formes - + Creates copies of a selected object along a selected path. Crée une série de copies d’un objet sélectionné le long d'un tracé sélectionné. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Point - + Creates a point object Crée un objet point @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygone - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crée un polygone régulier. CTRL pour accrocher, Maj pour contraindre @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rectangle - + Creates a 2-point rectangle. CTRL to snap Crée un rectangle par deux points. CTRL pour accrocher aux objets @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Pivoter - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Faire pivoter les objets sélectionnés. CTRL pour accrocher, MAJ pour contraindre, ALT pour créer une copie @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Sellum - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Change l'échelle des objets sélectionnés à partir d'un point de base. CTRL pour accrocher, MAJ pour contraindre, ALT pour copier @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Sélectionner le groupe - + Selects all objects with the same parents as this group Sélectionne tous les objets avec les mêmes parents que ce groupe @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Plan de travail - + Select a working plane for geometry creation Choisir un plan de travail pour la création d'objets 2D @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Projection 2D d'une forme - + Creates Shape 2D views of selected objects Crée une projection 2D d'objets sélectionnés @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Formes à partir de texte… - + Creates text string in shapes. Crée une forme à partir d’une chaîne textuelle. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Monter la barre d'accrochage - + Shows Draft snap toolbar Montrer la barre d'outils d'accrochage @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Tiɣemmaṛ - + Snaps to 45 and 90 degrees points on arcs and circles Aimante aux points à 45° et 90° de cercles ou arcs de cercle @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centre - + Snaps to center of circles and arcs Aimante au centre des cercles et des arcs @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Affiche des dimensions provisoires lors de l'aimantation aux objets Arch @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Terminaison - + Snaps to endpoints of edges S’accroche aux extrémités des arêtes @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Asiɣzef - + Snaps to extension of edges S’accroche sur le prolongement des lignes @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Tamezzut - + Snaps to grid points S’accroche aux points de grille @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersection - + Snaps to edges intersections S’accroche aux intersections des arêtes @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Activer/désactiver - + Activates/deactivates all snap tools at once Active/désactive tous les outils d’accrochage en une fois - + Lock Sekkeṛ @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Milieu - + Snaps to midpoints of edges S’accroche en milieu d’arête @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Le plus proche - + Snaps to nearest point on edges S’accroche sur l'arête au point le plus proche @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orthogonalement - + Snaps to orthogonal and 45 degrees directions S’accroche perpendiculairement ou à 45 degrés @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallèle - + Snaps to parallel directions of edges S’accroche parallèlement aux arêtes @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendiculaire - + Snaps to perpendicular points on edges S’accroche perpendiculairement aux arêtes @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plan de travail - + Restricts the snapped point to the current working plane Limite le point accroché au plan de travail actuel @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Aḍris - + Creates an annotation. CTRL to snap Crée une annotation. CTRL pour accrocher aux objets @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Bascule en mode construction pour les prochains objets. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Inverser le mode Continuer - + Toggles the Continue Mode for next commands. Bascule le mode Continu pour les prochaines commandes. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Bascule le mode d'affichage - + Swaps display mode of selected objects between wireframe and flatlines Bascule le mode d'affichage des objets sélectionnés entre filaire ou ombré @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Grille - + Toggles the Draft grid on/off Active/désactive la grille - + Grid Tamezzut - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Ajuste ou prolonge l'objet sélectionné, ou extrude les faces simples. CTRL active l'accrochage, Maj contraint au segment courant ou à la normale, Alt inverse @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Annuler le dernier segment - + Undoes the last drawn segment of the line being drawn Annuler le dernier segment de la ligne actuelle @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Mettre à niveau - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - GroupeVisu - - - - Adds a VisGroup - Ajoute un GroupeVisu - - Draft_Wire - - DWire - Filaire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crée un filaire à plusieurs points. CTRL pour forcer l'accrochage, MAJ pour contraindre. + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Réglages généraux Draft - + This is the default color for objects being drawn while in construction mode. La couleur par défaut pour les objets en cours de conception en mode construction. - + This is the default group name for construction geometry Le nom du groupe par défaut pour les géométries de construction - + Construction Construction @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainEnregistrer la couleur et la largeur de ligne actuelles pour toutes les sessions - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Si cette case est cochée, le mode copie sera conservée dans la commande, sinon les commandes seront toujours démarrées sans le mode copie - + Global copy mode Mode de copie global - + Default working plane Plan de travail par défaut - + None Ula yiwen - + XY (Top) XY (dessus) - + XZ (Front) XZ (face) - + YZ (Side) YZ (côté) @@ -1989,12 +2024,12 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Paramètres généraux - + Construction group name Nom du groupe de construction - + Tolerance Tolérance @@ -2019,22 +2054,22 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Spécifier un répertoire contenant des fichiers SVG de motifs de hachures qui peuvent être ajoutées aux définitions de hachures standards - + Draft interface mode Mode d'interface Draft - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Il s'agit du mode d'interface utilisateur de l'atelier Draft : le mode barre d'outils place tous les paramètres Draft dans une barre d'outils distincte, tandis que le mode de vue Tâches utilisera le système Vue Tâches de FreeCAD pour toutes les interactions avec l'utilisateur - + Toolbar Barre d'outils - + Taskview Vue Tâches @@ -2064,13 +2099,13 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Mode Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalement, après avoir copié les objets, les copies seront sélectionnées. Si cette option est cochée, les objets de base seront plutôt sélectionnés. - + Select base objects after copying Sélectionner les objets de base après la copie @@ -2105,7 +2140,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Les traits de lignes principales seront plus épais. Spécifiez ici le nombre de carreaux entre les lignes principales. - + Internal precision level Niveau de précision interne @@ -2220,12 +2255,12 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Imprimer les lignes blanches en noir - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Lorsque cette case est cochée, les outils Draft créeront des objets Part de type primitives au lieu des objets Draft, lorsque disponible. - + Use Part Primitives when available Utiliser des primitives de pièces si possible @@ -2245,12 +2280,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Toujours aimanté (désactiver le mode aimantation) - - Construction geometry - Géométrie de construction - - - + Construction geometry color Couleur de la géométrie de construction @@ -2390,7 +2420,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Sélectionnez un fichier de police - + Fill objects with faces whenever possible Remplir des objets avec des faces si possible @@ -2680,7 +2710,7 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Mise à jour automatique (ancien importateur uniquement) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2719,7 +2749,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2799,17 +2829,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2889,12 +2909,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2905,695 +2925,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Fermer + + + + O + O + + + + Copy + Copie + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Longueur + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Accroche Draft - - - Draft creation tools - Outils de création de Draft - - - - Draft modification tools - Outils de modification de Draft - - - - Utilities - Utilities - - - - Wire tools - Wire tools - - - - Snapping - Snapping - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. L'objet donné n'est pas plan et ne peut pas être converti en esquisse. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Barre de commandes Draft - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Appliquer aux objets sélectionnés - + Autogroup off Autogroup off - + active command: commande active : - + None Ula yiwen - + Active Draft command Taladna turmiḍt - + X coordinate of next point Tasidegt X n tneqqiḍt d-iteddun - + X X - + Y Y - + Z Z - + Y coordinate of next point Tasidegt Y n tneqqiḍt d-iteddun - + Z coordinate of next point Tasidegt Z n tneqqiḍt d-iteddun - + Enter point Entrez le point - + Enter a new point with the given coordinates Entrez un nouveau point avec les coordonnées données - + Length Longueur - + Angle Tiɣmeṛt - + Length of current segment Longueur du segment actuel - + Angle of current segment Angle du segment actuel - + Radius Aqqaṛ - + Radius of Circle Aqqaṛ n twinest - + If checked, command will not finish until you press the command button again Si cette case est cochée, la commande ne se terminera que si vous appuyez à nouveau sur son icône - + If checked, an OCC-style offset will be performed instead of the classic offset Si coché, un décalage de type OCC sera effectué au lieu du décalage classique - + &OCC-style offset Décalage de type &OCC - + Add points to the current object Ajouter des points à l'objet actuel - + Remove points from the current object Supprimer des points de l'objet actuel - + Make Bezier node sharp rendre les noeuds de Bezier angulaire - + Make Bezier node tangent Continuité en tangence - + Make Bezier node symmetric Tangence symétrique sur les sommet de courbes de bezier - + Sides Côtés - + Number of sides Nombre de côtés - + Offset Offset - + XY (top) XY (top) - - Select XY plane - Sélectionner le plan XY - - - + XZ (front) XZ (front) - - Select XZ plane - Sélectionner le plan XZ - - - + YZ (side) YZ (side) - - Select YZ plane - Sélectionner le plan YZ - - - + View Vue - - Select plane perpendicular to the current view - Sélectionner le plan perpendiculaire à l'axe de la vue actuelle - - - + Auto Auto - - Do not project points to a drawing plane - Ne pas projeter les points sur un plan de dessin - - - + Text string to draw Chaîne de texte à dessiner - + String Chaîne - + Height of text Height of text - + Height Awrir - + Intercharacter spacing Espacement entre les caractères - + Tracking Crénage - + Full path to font file: Chemin d'accès complet au fichier de police : - + Open a FileChooser for font file Ouvre une boîte de dialogue pour choisir le fichier de police - + Grid spacing Espacement de la grille - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Sélectionner un plan de travail - - - + Line Ligne - + DWire Filaire - + Circle Tawinest - + Center X Centre X - + Arc Arc - + Point Point - + Label Label - + Distance Distance - + Trim Ajuster - + Pick Object Choisir un objet - + Edit Éditer - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Valeur de taille non valide. Utilisation de 200,0. - + Invalid Tracking value. Using 0. Valeur non valide de crénage. Utilisation de 0. - + Please enter a text string. Veuillez entrer une chaîne de texte. - + Select a Font file Sélectionnez un fichier de police - + Please enter a font file. Veuillez entrer un fichier de police s'il vous plaît - + Autogroup: Autogroup: - + Faces Faces - + Remove Enlever - + Add Add - + Facebinder elements Surfaces liées: éléments - + Create Line Créer une ligne - - Pick next point: - - Indiquez le point suivant : - - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Create BezCurve - + Rectangle Rectangle - + Create Plane Create Plane - + Create Rectangle Create Rectangle - + Create Circle Create Circle - + Create Arc Create Arc - + Start Angle Tiɣmert n tazwara - + Aperture Aperture - + Polygon Polygone - + Create Polygon Create Polygon - + Ellipse Ellipse - + Create Ellipse Create Ellipse - + Text Aḍris - + Create Text Create Text - + Dimension Dimension - + Create Dimension Create Dimension - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Copie - + Move Déplacer - + Change Style Change Style - + Rotate Pivoter - - Cannot offset this object type - - Cannot offset this object type - - - - + Stretch Stretch - + Upgrade Mettre à niveau - + Downgrade Downgrade - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch Convertir en Esquisse - + Convert to Draft Convertir en Ébauche - + Convert Convertir - + Array Array - + Create Point Créer un point - + Mirror Miroir - + &Draft &Draft @@ -3617,179 +3783,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Fermer @@ -3834,7 +4000,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3849,7 +4015,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3864,454 +4030,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Terminer - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Défaut - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4321,56 +4312,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Sellum - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Dessus + + + + Front + Face + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Tirant d'eau + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilities + + + + Wire tools + Wire tools + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index d9f5c937c8..1831e94519 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index e7140052b5..9260075bcc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern 해치 패턴 정의 - + Sets the size of the pattern 패턴의 크기를 설정 - + Startpoint of dimension 치수의 시작점 - + Endpoint of dimension 치수의 끝점 - + Point through which the dimension line passes Point through which the dimension line passes - + The object measured by this dimension 측정되는 개체 - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter For arc/circle measurements, false = radius, true = diameter - + Font size 폰트 크기 - + The number of decimals to show 소수점 표시 수 - + Arrow size 화살표 크기 - + The spacing between the text and the dimension line 텍스트 및 치수선 사이의 간격 - + Arrow type 화살표 유형 - + Font name 글꼴 이름 - + Line width 선 두께 - + Line color 선 색 - + Length of the extension lines 연장선의 길이 - + Rotate the dimension arrows 180 degrees 치수 화살표를 180도 회전 - + Rotate the dimension text 180 degrees 치수 텍스트를 180도 회전 - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default 측정 단위. 빈칸이면 시스템 기본값 사용 - + Start angle of the dimension Start angle of the dimension - + End angle of the dimension End angle of the dimension - + The center point of this dimension 치수의 중심점 - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle 사각형의 길이 - + Radius to use to fillet the corners 모 깍기(필렛) 반지름 - + Size of the chamfer to give to the corners 모따기(챔퍼) 크기 - + Create a face 면 생성 - + Defines a texture image (overrides hatch patterns) 질감 이미지를 정의(해치 패턴 무시) - + Start angle of the arc Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle 원의 반지름 - + The minor radius of the ellipse 타원의 작은 반지름 - + The major radius of the ellipse 타원의 주요 반지름 - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line 라인의 시작점 - + The end point of this line 라인의 끝점 - + The length of this line 라인의 길이 - + Create a face if this object is closed 개체가 닫힌 경우 면 생성 - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces 면의 수 - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text The spacing between lines of text - + The color of the projected objects The color of the projected objects - + The linked object The linked object - + Shape Fill Style Shape Fill Style - + Line Style Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines 히든라인 보기 - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction X방향으로 복사할 개수 - + Number of copies in Y direction Y방향으로 복사할 개수 - + Number of copies in Z direction Z방향으로 복사할 개수 - + Number of copies 복사할 개수 - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X 위치 - + Y Location Y 위치 - + Z Location Z 위치 - + Text string 문자열 - + Font file name Font file name - + Height of text Height of text - + Inter-character spacing Inter-character spacing - + Linked faces Linked faces - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object 이 오브젝트의 배치 - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Base - + PointList PointList - + Count 횟수 - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Scale - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling 전체 크기조절 - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point 포인트 추가 - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style 현재 스타일을 적용 - + Applies current line width and color to selected objects 현재 선 굵기와 색상을 선택한 개체에 적용 @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc 호 - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array 배열 - + Creates a polar or rectangular array from a selected object 선택한 객체에서 원형 또는 사각형의 배열을 만듭니다 @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup 자동 그룹 - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Bezier 곡선을 만듭니다. [Ctrl]+ [Shift] @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle 원 - + Creates a circle. CTRL to snap, ALT to select tangent objects 원을 만듭니다. [Ctrl]+ [Alt] 접할 개체를 선택 @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone 복제 - + Clones the selected object(s) 선택한 객체를 복제 @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line 라인 닫기 - + Closes the line being drawn 그리고 있는 선을 닫습니다. @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point 점 제거 - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 치수를 생성 합니다. 스냅, 시프트 제한, 선분을 선택 하려면 ALT CTRL @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade 다운그레이드 - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch 초안을 스케치로 - + Convert bidirectionally between Draft and Sketch objects Draft와 스케치 개체 간의 양방향 변환 @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing 드로잉 - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit 편집 - + Edits the active object 활성 개체 편집 @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse 타원 - + Creates an ellipse. CTRL to snap 타원을 만듭니다. 스냅 하려면 CTRL @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) 선택한 면에서 facebinder 개체를 만듭니다. @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line 마침 선 - + Finishes a line without closing it 그것을 닫지 않고 선 종료 @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension 차원 플립 - + Flip the normal direction of a dimension 치수의 수직 방향으로 대칭 이동 @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal 치료 - + Heal faulty Draft objects saved from an earlier FreeCAD version 이전 FreeCAD 버전에서 저장 된 잘못 된 초안 개체를 치료 @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line 선 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 2 포인트 라인을 만듭니다. 스냅 하려면 CTRL, 제한 하려면 SHIFT @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Mirror - + Mirrors the selected objects along a line defined by two points Mirrors the selected objects along a line defined by two points @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move 이동 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy 활성 개체를 오프셋합니다. 스냅하려면 CTRL, 제한하려면 SHIFT, 복사하려면 ALT @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. 선택한 경로 따라 선택 된 개체의 복사본을 만듭니다. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point 점 - + Creates a point object Point 개체를 만듭니다. @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon 다각형 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 정N각 다각형을 만듭니다. 스냅하려면 CTRL, 제한 하려면 SHIFT @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle 사각형 - + Creates a 2-point rectangle. CTRL to snap 2-포인트 사각형을 만듭니다. 스냅하려면 CTRL @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate 회전 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 선택한 개체를 회전합니다. 스냅하려면 CTRL, 제한 하려면 SHIFT, ALT는 복사본을 만듭니다. @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Scale - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 기준점에서 선택한 객체를 스케일 변경 합니다. 스냅하려면 CTRL, 제한 하려면 SHIFT, 복사하려면 ALT @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group 그룹 선택 - + Selects all objects with the same parents as this group 동일한 부모로 이루어진 모든 개체를 이 그룹으로 선택 @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane SelectPlane - + Select a working plane for geometry creation 형상 생성을 위한 작업 평면 선택 @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 모양 2D 보기 - + Creates Shape 2D views of selected objects 선택한 개체의 모양을 2D 뷰로 만듭니다. @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... 텍스트에서 셰이프... - + Creates text string in shapes. 셰이프에 텍스트 문자열을 만듭니다. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar 스냅 표시줄 표시 - + Shows Draft snap toolbar Draft 스냅인 도구 모음을 표시 @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles 각도 - + Snaps to 45 and 90 degrees points on arcs and circles 호와 원에서 45와 90도 지점으로 스냅 @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center 센터 - + Snaps to center of circles and arcs 원 및 호의 중심에 스냅 @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects 아치 객체에 스냅 하는 경우 치수를 표시 @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint 끝점 - + Snaps to endpoints of edges 모서리의 끝점으로 스냅 @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension 확장 - + Snaps to extension of edges 모서리의 연장으로 스냅 @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid 격자 - + Snaps to grid points 격자 점으로 스냅 @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection 교집합 - + Snaps to edges intersections 모서리 교차점으로 스냅 @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off 켜기/끄기 전환 - + Activates/deactivates all snap tools at once 모든 스냅인 도구를 한 번에 활성화/비활성화 - + Lock Lock @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint 중간점 - + Snaps to midpoints of edges 모서리의 중간점으로 스냅 @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest 가장 가까운 - + Snaps to nearest point on edges 모서리에서 가장 가까운 점에 스냅 @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho 직교 - + Snaps to orthogonal and 45 degrees directions 직교 및 45도 방향으로 스냅 @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel 평행 - + Snaps to parallel directions of edges 모서리의 평행 방향으로 스냅 @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular 수직 - + Snaps to perpendicular points on edges 모서리의 수직 점에 스냅 @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane 작업 평면 - + Restricts the snapped point to the current working plane 스냅된 포인트를 현재 작업 평면으로 제한 @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap 주석을 만듭니다. 스냅하려면 CTRL @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. 다음 개체에 대 한 Construction 모드를 전환합니다. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Continue모드를 토글 - + Toggles the Continue Mode for next commands. 다음 명령에 대 한 Continue 모드를 토글 합니다. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode 디스플레이 모드 전환 - + Swaps display mode of selected objects between wireframe and flatlines 선택된 객체의 디스플레이 모드를 와이어 프레임과 flatlines 사이에서 변경합니다 @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid 격자 선택/해제 - + Toggles the Draft grid on/off Draft 격자 켜기/끄기 전환 - + Grid 격자 - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 선택한 개체를 트림 또는 확장 하거나 하나의 면을 밀어냅니다. 스냅하려면 CTRL, 현재 segment또는 normal로 제한하려면 SHIFT, 뒤집으려면 ALT @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment 마지막 세그먼트를 취소 - + Undoes the last drawn segment of the line being drawn 그려지는 선의 마지막으로 그린된 세그먼트를 취소 @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - VisGroup 추가 - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - 다중 포인트 DraftWire (DWire)를 만듭니다. 스냅인 하려면 CTRL, 제한 하려면 SHIFT + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings 일반적인 Draft 설정 - + This is the default color for objects being drawn while in construction mode. 이것은 construction 모드에서 그려지는 개체에 대 한 기본 색입니다. - + This is the default group name for construction geometry 이것은 구조형상에 대한 기본 그룹 이름임. - + Construction Construction @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain세션에서 현재 색상 및 선 폭을 저장 - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode 여기가 선택 되면, 모든 커맨드에서 복사모드가 유지된다. 그렇지 않으면 커맨드는 항상 비-복사모드에서 시작한다. - + Global copy mode 글로벌 복사 모드 - + Default working plane 기본 작업 평면 - + None 없음 - + XY (Top) XY (맨 위) - + XZ (Front) XZ (앞) - + YZ (Side) YZ (측면) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" 일반 설정 - + Construction group name Construction 그룹 이름 - + Tolerance 공차 @@ -2015,22 +2050,22 @@ such as "Arial:Bold" 여기에 표준 Draft hatch 패턴을 추가할 수 있는 <pattern>정의를 포함 하는 SVG 파일이 포함 된 디렉터리를 지정할 수 있습니다. - + Draft interface mode Draft 인터페이스 모드 - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction 이것은 Draft 모듈이 작동 할 UI 모드 입니다: 도구 모음 모드 에서는 모든 Draft 설정이 별도의 도구 모음에 위치하며, 작업 표시줄 모드 에서는 FreeCAD Taskview 시스템을 사용 하 여 모든 사용자와 상호 작용을 합니다. - + Toolbar 도구 모음 - + Taskview Taskview @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. 일반적으로, 개체를 복사한 후 복사본은 자동으로 선택 되어 있습니다. 이 옵션을 선택 하는 경우 기본 개체 대신 선택 됩니다. - + Select base objects after copying 복사 후 base 개체 선택 @@ -2100,7 +2135,7 @@ such as "Arial:Bold" 메인라인은 두껍게 그려집니다. 메인라인 사이에 들어갈 사각형의 수를 지정합니다. - + Internal precision level 내부 정밀도 수준 @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Translate white line color to black - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2240,12 +2275,7 @@ such as "Arial:Bold" 항상 스냅 (snap 모드 해제) - - Construction geometry - Construction geometry - - - + Construction geometry color Construction geometry color @@ -2385,7 +2415,7 @@ such as "Arial:Bold" 글꼴 파일을 선택 - + Fill objects with faces whenever possible 가능한 모든 개체의 면을 채우기 @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2714,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2794,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2884,12 +2904,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,695 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + 생성 geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + 닫기 + + + + O + O + + + + Copy + 복사하기 + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + 돌출 컷(Pocket) 길이 + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Draft creation tools - - - - Draft modification tools - Draft modification tools - - - - Utilities - Utilities - - - - Wire tools - Wire tools - - - - Snapping - Snapping - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Apply to selected objects - + Autogroup off Autogroup off - + active command: active command: - + None 없음 - + Active Draft command Active Draft command - + X coordinate of next point X coordinate of next point - + X X - + Y Y - + Z Z - + Y coordinate of next point Y coordinate of next point - + Z coordinate of next point Z coordinate of next point - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length 돌출 컷(Pocket) 길이 - + Angle 각 - + Length of current segment Length of current segment - + Angle of current segment Angle of current segment - + Radius Radius - + Radius of Circle Radius of Circle - + If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset &OCC-style offset - + Add points to the current object Add points to the current object - + Remove points from the current object Remove points from the current object - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Sides - + Number of sides Number of sides - + Offset Offset - + XY (top) XY (top) - - Select XY plane - Select XY plane - - - + XZ (front) XZ (front) - - Select XZ plane - Select XZ plane - - - + YZ (side) YZ (side) - - Select YZ plane - Select YZ plane - - - + View View - - Select plane perpendicular to the current view - Select plane perpendicular to the current view - - - + Auto 자동 - - Do not project points to a drawing plane - Do not project points to a drawing plane - - - + Text string to draw Text string to draw - + String 문자열 - + Height of text Height of text - + Height 높이 - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing 그리드 간격 - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Select Plane - - - + Line 선 - + DWire DWire - + Circle 원 - + Center X Center X - + Arc 호 - + Point 점 - + Label Label - + Distance Distance - + Trim Trim - + Pick Object Pick Object - + Edit 편집 - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Autogroup: Autogroup: - + Faces Faces - + Remove 제거 - + Add 추가 - + Facebinder elements Facebinder elements - + Create Line Create Line - - Pick next point: - - Pick next point: - - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Create BezCurve - + Rectangle 사각형 - + Create Plane Create Plane - + Create Rectangle Create Rectangle - + Create Circle Create Circle - + Create Arc Create Arc - + Start Angle Start Angle - + Aperture Aperture - + Polygon 다각형 - + Create Polygon Create Polygon - + Ellipse 타원 - + Create Ellipse Create Ellipse - + Text Text - + Create Text Create Text - + Dimension Dimension - + Create Dimension Create Dimension - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy 복사하기 - + Move 이동 - + Change Style Change Style - + Rotate 회전 - - Cannot offset this object type - - Cannot offset this object type - - - - + Stretch Stretch - + Upgrade Upgrade - + Downgrade 다운그레이드 - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch 스케치를 변환 - + Convert to Draft 초안을 변환 - + Convert 변환 - + Array 배열 - + Create Point Create Point - + Mirror Mirror - + &Draft 드래프트(&D) @@ -3612,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close 닫기 @@ -3829,7 +3995,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3844,7 +4010,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3859,454 +4025,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Finish - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default 기본값 - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline 생성: B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4316,56 +4307,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Scale - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + 위 + + + + Front + 전면 + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + 흘수 + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilities + + + + Wire tools + Wire tools + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.qm b/src/Mod/Draft/Resources/translations/Draft_lt.qm index badb4693bc..4998ead446 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_lt.qm and b/src/Mod/Draft/Resources/translations/Draft_lt.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts index 6beed7bc8e..2c42e0fa1b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_lt.ts +++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Apibrėžia brūkšniuotę - + Sets the size of the pattern Nustato modelio dydį - + Startpoint of dimension Matmens pradžios taškas - + Endpoint of dimension Matmens pabaigos taškas - + Point through which the dimension line passes Taškas, per kurį eina matmenų linija - + The object measured by this dimension Objektas matuojamas pagal šį matmenį - + The geometry this dimension is linked to Geometrija susijusi su šiuo matmeniu - + The measurement of this dimension Šio matmens matavimas - + For arc/circle measurements, false = radius, true = diameter Lanko ar apskritimo matavimuose, „Netiesa“ reiškia spindulį, „Tiesa“ – skersmenį - + Font size Šrifto dydis - + The number of decimals to show Atvaizduojamų skaitmenų po kablelio kiekis - + Arrow size Rodyklės dydis - + The spacing between the text and the dimension line Tarpas tarp teksto ir matmens linijos - + Arrow type Rodyklės rūšis - + Font name Šrifto pavadinimas - + Line width Linijos storis - + Line color Linijos spalva - + Length of the extension lines Kraštinės tęsinio ilgis - + Rotate the dimension arrows 180 degrees Pasukti matmenų rodyklę 180° - + Rotate the dimension text 180 degrees Pasukti matmens užrašą 180° - + Show the unit suffix Rodyti priesagą - + The position of the text. Leave (0,0,0) for automatic position Teksto padėtis. Palikite (0,0,0) padėčiai savaime nustatyti - + Text override. Use $dim to insert the dimension length Teksto nepaisymas. Jei norite įterpti matmenų ilgį, naudokite $dim - + A unit to express the measurement. Leave blank for system default Matavimo vienetas. Palikite tuščią sistemos numatytiems nustatymams - + Start angle of the dimension Matmens pradžios kampas - + End angle of the dimension Matmens pabaigos kampas - + The center point of this dimension Matmens vidurio taškas - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Stačiakampio ilgis - + Radius to use to fillet the corners Kampų užapvalinimo spindulys - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Sukurti sieną - + Defines a texture image (overrides hatch patterns) Apibrėžia tekstūros vaizdą (pakeičia brūkšniuotę) - + Start angle of the arc Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle Radius of the circle - + The minor radius of the ellipse Mažasis elipsės spindulys - + The major radius of the ellipse Didysis elipsės spindulys - + The vertices of the wire Laužtės viršūnės - + If the wire is closed or not Ar laužtė yra uždara, ar atvira - + The start point of this line The start point of this line - + The end point of this line The end point of this line - + The length of this line The length of this line - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Number of faces - + Radius of the control circle Valdančiojo apskritimo spindulys - + How the polygon must be drawn from the control circle Kaip daugiakampis turi būti nupieštas iš valdančiojo apskritimo - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object Rašmenų dydis šio objekto viduje - + The spacing between lines of text The spacing between lines of text - + The color of the projected objects The color of the projected objects - + The linked object Susietas objektas - + Shape Fill Style Shape Fill Style - + Line Style - Line Style + Atkarpos stilius - + If checked, source objects are displayed regardless of being visible in the 3D model Jeigu patikrinta, šaltinio objektai yra vaizduojami neatsižvelgiant į tai kaip jie rodomi 3D modelyje - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve Bezjė glodžiosios kreivės taškai - + The degree of the Bezier function Bezjė funkcijos eilė - + Continuity Continuity - + If the Bezier curve should be closed or not Ar Bezjė kreivė turėtų būti uždaroji arba atviroji - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object - The projection vector of this object + Projekcijos vektorius šiam daiktui - + The way the viewed object must be projected - The way the viewed object must be projected + Būdas, kaip daiktas turi būti projektuojamas - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Rodyti paslėptas linijas - + The base object that must be duplicated - The base object that must be duplicated + Pagrindinis daiktas, kuris turi būti padaugintas - + The type of array to create - The type of array to create + Kuriamo pasyvo rūšis - + The axis direction Ašies kryptis - + Number of copies in X direction Kopijų kiekis X ašies kryptimi - + Number of copies in Y direction Kopijų kiekis Y ašies kryptimi - + Number of copies in Z direction Kopijų kiekis Z ašies kryptimi - + Number of copies Kopijų kiekis - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Vidurio taškas - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Padėtis - + Y Location Y Padėtis - + Z Location Z Padėtis - + Text string - Text string + Tekstinė eilutė - + Font file name - Font file name + Šrifto rinkmenos vardas - + Height of text - Height of text + Rašmenų aukštis - + Inter-character spacing - Inter-character spacing + Tarpas tarp rašmenų - + Linked faces - Linked faces + Susietos sienos - + Specifies if splitter lines must be removed - Specifies if splitter lines must be removed + Nurodoma, jei skirtuko linijos turi būti pašalintas - + An optional extrusion value to be applied to all faces - An optional extrusion value to be applied to all faces + Pasirinktinis išstūmimo dydis, pritaikomas visoms sienoms - + Height of the rectangle - Height of the rectangle + Stačiakampio ilgis - + Horizontal subdivisions of this rectangle - Horizontal subdivisions of this rectangle + Šio stačiakampio gulščiųjų sudalinimų kiekis - + Vertical subdivisions of this rectangle - Vertical subdivisions of this rectangle + Šio stačiakampio statmenųjų sudalinimų kiekis - + The placement of this object Šio objekto dėstymas - + The display length of this section plane Pjūvio plokštumos ilgio rodmuo - + The size of the arrows of this section plane Pjūvio plokštumos rodyklių dydis - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text Teksto dydis - + The font of the text Teksto šriftas - + The size of the arrow Rodyklės dydis - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Teksto spalva - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible Jei nurodyta „Tiesa“, šio daikto ypatybės bus perskaičiuotas tik jei jis bus matomas - + Base Pagrindas - + PointList PointList - + Count Kiekis - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Mastelis - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X rodiklis - + Y factor Y rodiklis - + Z factor Z rodiklis - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -780,20 +815,25 @@ from menu Tools -> Addon Manager Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Plėtinių valdyklė) pagalba - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Kurti kloną + DraftShapeStringGui @@ -861,12 +901,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -874,12 +914,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_AddPoint - + Add Point Pridėti tašką - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -887,12 +927,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -900,12 +940,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_ApplyStyle - + Apply Current Style Apply Current Style - + Applies current line width and color to selected objects Applies current line width and color to selected objects @@ -913,12 +953,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_Arc - + Arc Lankas - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -926,7 +966,7 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_ArcTools - + Arc tools Arc tools @@ -934,12 +974,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -947,12 +987,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_Array - + Array Masyvas - + Creates a polar or rectangular array from a selected object Creates a polar or rectangular array from a selected object @@ -960,12 +1000,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -973,12 +1013,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_BSpline - + B-spline B-splainas, glodžioji kreivė - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Sukuria daugiataškę glodžiąją Bezjė keivę. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui @@ -986,12 +1026,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_BezCurve - + BezCurve glodžioji Bezjė kreivė - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Sukuria glodžiąją Bezjė keivę. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui @@ -999,7 +1039,7 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_BezierTools - + Bezier tools Bezier tools @@ -1007,12 +1047,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_Circle - + Circle Apskritimas - + Creates a circle. CTRL to snap, ALT to select tangent objects Sukuria apskritimą. Spauskite CTRL kibimo įgalinimui, ALT besiliečiančių daiktų parinkimui @@ -1020,12 +1060,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_Clone - + Clone Klonuoti - + Clones the selected object(s) Clones the selected object(s) @@ -1033,12 +1073,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_CloseLine - + Close Line Close Line - + Closes the line being drawn Closes the line being drawn @@ -1046,12 +1086,12 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1061,12 +1101,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Pašalinti tašką - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1074,12 +1114,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Matmuo - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Sukuria matmens užrašą. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui, ALT atkarpos parinkimui @@ -1087,12 +1127,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Atstatyti į ankstesnę laidą - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1100,12 +1140,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draft to Sketch - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -1113,12 +1153,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Techninis brėžinys - + Puts the selected objects on a Drawing sheet Įtraukia pasirinktus daiktus į Techninio brėžinio apipavidalinimo lapą @@ -1126,12 +1166,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Taisyti - + Edits the active object Taisyti daiktą @@ -1139,30 +1179,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Elipsė - + Creates an ellipse. CTRL to snap Sukuria elipsę. Spauskite CTRL kibimo įgalinimui @@ -1170,12 +1205,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1183,12 +1218,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Finish line - + Finishes a line without closing it Finishes a line without closing it @@ -1196,12 +1231,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Apgręžti matmenį - + Flip the normal direction of a dimension Apgręžti matmens normalės kryptį @@ -1209,12 +1244,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1222,12 +1257,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1235,25 +1270,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Atkarpa - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Sukuria tiesės atkarpą, turinčią du galinius taškus. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui @@ -1261,12 +1309,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Mirror - + Mirrors the selected objects along a line defined by two points Mirrors the selected objects along a line defined by two points @@ -1274,12 +1322,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Perkelti - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1287,12 +1335,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Paslinkti taisomą daiktą. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui, ALT kopijavimui @@ -1300,12 +1348,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -1313,12 +1361,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Taškas - + Creates a point object Sukuria tašką @@ -1326,12 +1374,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1339,12 +1387,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Daugiakampis - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Sukuria taisyklingąjį daugiakampį. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui @@ -1352,12 +1400,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Stačiakampis - + Creates a 2-point rectangle. CTRL to snap Sukuria stačiakampį iš dviejų taškų. Spauskite CTRL kibimo įgalinimui @@ -1365,12 +1413,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Pasukti - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Pasuka pažymėtus daiktus. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui, ALT kopijavimui @@ -1378,12 +1426,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Mastelis - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Pakeičia pažymėtų daiktų dydį nuo pradžios taško. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui, ALT kopijavimui @@ -1391,12 +1439,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Pasirinkti grupę - + Selects all objects with the same parents as this group Selects all objects with the same parents as this group @@ -1404,12 +1452,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane SelectPlane - + Select a working plane for geometry creation Select a working plane for geometry creation @@ -1417,12 +1465,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1430,12 +1478,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Shape 2D view - + Creates Shape 2D views of selected objects Creates Shape 2D views of selected objects @@ -1443,12 +1491,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -1456,12 +1504,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Rodyti kibimo įrankių juostą - + Shows Draft snap toolbar Rodo braižyklės kibimo įrankių juostą @@ -1469,12 +1517,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1482,12 +1530,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Kampai - + Snaps to 45 and 90 degrees points on arcs and circles Kimba prie apskritimo ar lanko taškų, sudarančių 45° ar 90° kampą @@ -1495,12 +1543,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Vidurys - + Snaps to center of circles and arcs Kimba prie apskritimo ar lanko vidurio taško @@ -1508,12 +1556,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Matmenys - + Shows temporary dimensions when snapping to Arch objects Rodyti laikinąjį matmenį kimbant prie architektūrinių daiktų @@ -1521,12 +1569,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Galinis taškas - + Snaps to endpoints of edges Kimba prie kraštinės galinių taškų @@ -1534,12 +1582,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Tęsinys - + Snaps to extension of edges Kimba prie kraštinės tęsinių @@ -1547,12 +1595,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Tinklelis - + Snaps to grid points Kimba prie tinklelio taškų @@ -1560,12 +1608,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Sankirta - + Snaps to edges intersections Kimba prie kraštinių sankirtos taškų @@ -1573,17 +1621,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Įjungti arba išjungti - + Activates/deactivates all snap tools at once Iškart įjungia arba išjungia visus kibimo įrankius - + Lock Užrakinti @@ -1591,12 +1639,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Vidurio taškas - + Snaps to midpoints of edges Kimba prie kraštinės vidurio taško @@ -1604,12 +1652,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Artimiausias - + Snaps to nearest point on edges Kimba prie kraštinės artimiausiojo taško @@ -1617,12 +1665,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Statmenas - + Snaps to orthogonal and 45 degrees directions Kimba prie statmens arba 45° kampą sudarančios įstrižainės @@ -1630,12 +1678,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Lygiagretus - + Snaps to parallel directions of edges Kimba prie kraštinės lygiagretės @@ -1643,12 +1691,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Statmenas - + Snaps to perpendicular points on edges Kimba prie statmenį sudarančių taškų ar kraštinių @@ -1656,12 +1704,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Ypatingasis - + Snaps to special locations of objects Kimba prie ypatingųjų daiktų vietų @@ -1669,12 +1717,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Darbinė plokštuma - + Restricts the snapped point to the current working plane Pritraukia prie taškų, esančių darbinėje plokštumoje @@ -1682,12 +1730,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1695,12 +1743,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Stretches the selected objects @@ -1708,12 +1756,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Tekstas - + Creates an annotation. CTRL to snap Sukuria aprašą. Spauskite CTRL kibimo įgalinimui @@ -1721,12 +1769,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Toggles the Construction Mode for next objects. - + Toggle Construction Mode Įjungti ar išjungti pagalbinės geometrijos braižymą @@ -1734,12 +1782,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode for next commands. @@ -1747,12 +1795,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Toggle display mode - + Swaps display mode of selected objects between wireframe and flatlines Swaps display mode of selected objects between wireframe and flatlines @@ -1760,22 +1808,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Rodyti ar slėpti tinklelį - + Toggles the Draft grid on/off Rodomas arba slepiamas braižyklės tinklelis - + Grid Tinklelis - + Toggles the Draft grid On/Off Rodomas arba slepiamas braižyklės tinklelis @@ -1783,12 +1831,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trumpina arba prailgina pažymėtą daiktą, arba išstumia pavienes sienas. Paspaustas CTRL mygtukas įgalina kibimą, SHIFT susieja su dabartine atkarpa arba statmeniu, ALT apgręžia @@ -1796,12 +1844,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Undo last segment - + Undoes the last drawn segment of the line being drawn Undoes the last drawn segment of the line being drawn @@ -1809,51 +1857,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Sukuria laužtę braižyklėje. Spauskite CTRL kibimo įgalinimui, SHIFT varžymui + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1861,22 +1896,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings General Draft Settings - + This is the default color for objects being drawn while in construction mode. This is the default color for objects being drawn while in construction mode. - + This is the default group name for construction geometry This is the default group name for construction geometry - + Construction Construction @@ -1886,37 +1921,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSave current color and linewidth across sessions - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode - + Global copy mode Global copy mode - + Default working plane Default working plane - + None Joks - + XY (Top) XY (viršus) - + XZ (Front) XZ (Priekis) - + YZ (Side) YZ (Šonas) @@ -1987,12 +2022,12 @@ such as "Arial:Bold" General settings - + Construction group name Construction group name - + Tolerance Leidžiamoji nuokrypa @@ -2017,22 +2052,22 @@ such as "Arial:Bold" Čia nurodykite aplanką, kuriame yra raštų, kuriais gali būti papildyta įprastinė brūkšniuotė - + Draft interface mode Draft interface mode - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction - + Toolbar Toolbar - + Taskview Taskview @@ -2062,12 +2097,12 @@ such as "Arial:Bold" Alt mygtuko veiksena - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - + Select base objects after copying Select base objects after copying @@ -2102,7 +2137,7 @@ such as "Arial:Bold" Pagrindiniai langeliai bus storesni. Čia nurodykite, kiek pagalbinių langelių telpa pagrindinio langelio kraštinėje. - + Internal precision level Vidinis tikslumo lygis @@ -2217,12 +2252,12 @@ such as "Arial:Bold" Translate white line color to black - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2242,12 +2277,7 @@ such as "Arial:Bold" Visuomet kibti (išjungia kibimo mygtuko veikseną) - - Construction geometry - Construction geometry - - - + Construction geometry color Construction geometry color @@ -2387,7 +2417,7 @@ such as "Arial:Bold" Select a font file - + Fill objects with faces whenever possible Fill objects with faces whenever possible @@ -2677,7 +2707,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2716,7 +2746,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2796,17 +2826,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate Brėžiant tiesės atkarpas, svarbiau bus ilgis, nei X koordinatė @@ -2886,12 +2906,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2902,695 +2922,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Pagalbinė braižymo geometrija + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Užverti + + + + O + O + + + + Copy + Kopijuoti + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Length + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Kibimas braižyklėje - - - Draft creation tools - Draft creation tools - - - - Draft modification tools - Draft modification tools - - - - Utilities - Utilities - - - - Wire tools - Vieliniai įrankiai - - - - Snapping - Kibimas - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color Esamoji kreivės spalva - + Current face color Esamoji sienos spalva - + Current line width Esamasis kreivės storis - + Current font size Esamasis šrifto dydį - + Apply to selected objects Apply to selected objects - + Autogroup off Autogroup off - + active command: atliekamas veiksmas: - + None Joks - + Active Draft command Atliekamas braižyklės veiksmas - + X coordinate of next point Sekančio taško X koordinatė - + X X - + Y Y - + Z Z - + Y coordinate of next point Sekančio taško Y koordinatė - + Z coordinate of next point Sekančio taško Z koordinatė - + Enter point Įveskite tašką - + Enter a new point with the given coordinates Įvesti naujo taško koordinates - + Length Length - + Angle Kampas - + Length of current segment Esamos atkarpos ilgis - + Angle of current segment Esamos atkarpos kampas - + Radius Spindulys - + Radius of Circle Apskritimo spindulys - + If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset &OCC-style offset - + Add points to the current object Add points to the current object - + Remove points from the current object Remove points from the current object - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Sienos - + Number of sides Sienų skaičius - + Offset Offset - + XY (top) XY (viršus) - - Select XY plane - Pasirinkti XY plokštumą - - - + XZ (front) XZ (priekis) - - Select XZ plane - Pasirinkti XZ plokštumą - - - + YZ (side) YZ (šonas) - - Select YZ plane - Pasirinkti YZ plokštumą - - - + View Rodyti - - Select plane perpendicular to the current view - Select plane perpendicular to the current view - - - + Auto Automatiškai - - Do not project points to a drawing plane - Neprojektuoti taškų į brėžinio plokštumą - - - + Text string to draw Text string to draw - + String Eilutė - + Height of text - Height of text + Rašmenų aukštis - + Height Aukštis - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing Tinklelio langelių dydis - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Select Plane - - - + Line Atkarpa - + DWire DWire - + Circle Apskritimas - + Center X Vidurio X - + Arc Lankas - + Point Taškas - + Label Label - + Distance Distance - + Trim Apkarpyti - + Pick Object Pasirinkti daiktą - + Edit Taisyti - + Global X Visuotinis X - + Global Y Visuotinis Y - + Global Z Visuotinis Z - + Local X Vietinis X - + Local Y Vietinis Y - + Local Z Vietinis Z - + Invalid Size value. Using 200.0. Neleistina dydžio skaitinė vertė. Bus naudojama 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Pasirinkite šriftų failą - + Please enter a font file. Įveskite šrifto failą. - + Autogroup: Autogroup: - + Faces Sienos - + Remove Pašalinti - + Add Pridėti - + Facebinder elements Facebinder elements - + Create Line Nubrėžti tiesę - - Pick next point: - - Pasirinkti sekantį tašką: - - - - + Convert to Wire Versti į laužtę - + BSpline B-splainas (glodžioji kreivė) - + BezCurve glodžioji Bezjė kreivė - + Create BezCurve Create BezCurve - + Rectangle Stačiakampis - + Create Plane Sukurti plokštumą - + Create Rectangle Nubrėžti stačiakampį - + Create Circle Nubrėžti apskritimą - + Create Arc Nubrėžti lanką - + Start Angle Pradinis kampas - + Aperture Anga - + Polygon Daugiakampis - + Create Polygon Nubrėžti daugiakampį - + Ellipse Elipsė - + Create Ellipse Nubrėžti elipsę - + Text Tekstas - + Create Text Nubrėžti tekstą - + Dimension Matmuo - + Create Dimension Kurti matmens užrašą - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Kopijuoti - + Move Perkelti - + Change Style Keisti stilių - + Rotate Pasukti - - Cannot offset this object type - - Cannot offset this object type - - - - + Stretch Stretch - + Upgrade Upgrade - + Downgrade Atstatyti į ankstesnę laidą - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Paversti - + Array Masyvas - + Create Point Nubrėžti tašką - + Mirror Mirror - + &Draft &Draft @@ -3614,179 +3780,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Užverti @@ -3831,7 +3997,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3846,7 +4012,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3861,454 +4027,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Užbaigti - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Numatytasis - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Nubrėžti B-splainą - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4318,56 +4309,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Mastelis - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Iš viršaus + + + + Front + Iš priekio + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatinis + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Sukimas + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Grimzlė + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilities + + + + Wire tools + Vieliniai įrankiai + + + + Snapping + Kibimas + diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index c39e0e3ec2..36bb2b9455 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 14fd96ac12..434dba90a5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definieert een arceer patroon - + Sets the size of the pattern Stelt de grootte van het patroon in - + Startpoint of dimension Dimensie startpunt - + Endpoint of dimension Dimensie eindpunt - + Point through which the dimension line passes Punt waardoor de dimensie lijn passeert - + The object measured by this dimension Het object gemeten door deze maat - + The geometry this dimension is linked to De geometrie waarmee deze maat gelinkt is - + The measurement of this dimension De meetwaarde van deze maat - + For arc/circle measurements, false = radius, true = diameter Voor boog/cirkel maten, vals = radius, waar = diameter - + Font size Lettergrootte - + The number of decimals to show Het aantal weer te geven decimalen - + Arrow size Pijl grootte - + The spacing between the text and the dimension line De afstand tussen de tekst en de maatlijn - + Arrow type Pijl type - + Font name Font naam - + Line width Lijndikte - + Line color Lijnkleur - + Length of the extension lines Lengte van de verlengingslijnen - + Rotate the dimension arrows 180 degrees Draai de dimensiepijlen 180 graden - + Rotate the dimension text 180 degrees Roteer het maatgetal 180 graden - + Show the unit suffix Eenheid-achtervoegsel tonen - + The position of the text. Leave (0,0,0) for automatic position De positie van de tekst. (0,0,0) behouden voor automatisch positioneren - + Text override. Use $dim to insert the dimension length Tekst overschrijven. Gebruik $dim om de afmeting in te voegen - + A unit to express the measurement. Leave blank for system default De eenheid waarin de maat wordt uitgedrukt. Laat open voor systeem standaard - + Start angle of the dimension Starthoek van de dimensie - + End angle of the dimension Eindhoek van de dimensie - + The center point of this dimension Het centerpunt van deze maat - + The normal direction of this dimension De haakse richting van deze maat - + Text override. Use 'dim' to insert the dimension length Tekst overschrijven. Gebruik 'dim' om de maatlengte in te geven - + Length of the rectangle Lengte van de rechthoek - + Radius to use to fillet the corners Radius waarmee de hoeken worden afgerond - + Size of the chamfer to give to the corners De grote waarmee de hoeken worden afgeschuind - + Create a face Maak een vlak - + Defines a texture image (overrides hatch patterns) Definieert een afbeelding als textuur (overschrijft arceer patroon) - + Start angle of the arc Starthoek van de boog - + End angle of the arc (for a full circle, give it same value as First Angle) Eindhoek van de boog (voor een volledige cirkel, geeft dezelfde waarde als de eerste hoek) - + Radius of the circle Straal van de cirkel - + The minor radius of the ellipse De kleine straal van de ellips - + The major radius of the ellipse De grote straal van de ellips - + The vertices of the wire De hoekpunten van de lijn - + If the wire is closed or not Als de draad is gesloten of niet - + The start point of this line Het beginpunt van deze lijn - + The end point of this line Het eindpunt van deze lijn - + The length of this line De lengte van deze lijn - + Create a face if this object is closed Maak een vlak als dit object gesloten is - + The number of subdivisions of each edge Het aantal onderverdelingen van elke rand - + Number of faces Aantal vlakken - + Radius of the control circle De straal van de controlecirkel - + How the polygon must be drawn from the control circle Hoe de polygoon moet getekend worden vanuit de controlecirkel - + Projection direction Projectie richting - + The width of the lines inside this object De breedte van de lijnen binnen dit object - + The size of the texts inside this object De grootte van de teksten binnen dit object - + The spacing between lines of text De afstand tussen twee regels tekst - + The color of the projected objects De kleur van het geprojecteerd object - + The linked object Het gekoppelde object - + Shape Fill Style Vulstijl van de vorm - + Line Style Lijnstijl - + If checked, source objects are displayed regardless of being visible in the 3D model Indien aangevinkt, worden bronobjecten weergegeven ongeacht de zichtbaarheid in het 3D-model - + Create a face if this spline is closed Maak een vlak als de curve gesloten is - + Parameterization factor Parametrisatiefactor - + The points of the Bezier curve De punten van de Bezier curve - + The degree of the Bezier function De omvang van de Bezier-functie - + Continuity Continuïteit - + If the Bezier curve should be closed or not Of de Bezier-curve moet worden gesloten of niet - + Create a face if this curve is closed Maak een vlak als deze curve gesloten is - + The components of this block De componenten van dit blok - + The base object this 2D view must represent Het basisobject dat deze 2D-weergave moet weergeven - + The projection vector of this object De vector projectie van dit object - + The way the viewed object must be projected De manier waarop die het weergegeven object moet worden geprojecteerd - + The indices of the faces to be projected in Individual Faces mode De indexen van de vlakken die geprojecteerd moeten worden in de individuele aanzichtmodus - + Show hidden lines Toon verborgen lijnen - + The base object that must be duplicated Het basisobject dat moet worden gedupliceerd - + The type of array to create Het type array dat moet worden gemaakt - + The axis direction De richting van de as - + Number of copies in X direction Aantal Kopieën in X-richting - + Number of copies in Y direction Aantal Kopieën in Y-richting - + Number of copies in Z direction Aantal Kopieën in Z-richting - + Number of copies Aantal kopieën - + Distance and orientation of intervals in X direction Afstand en richting van het interval in X-richting - + Distance and orientation of intervals in Y direction Afstand en richting van het interval in Y-richting - + Distance and orientation of intervals in Z direction Afstand en richting van het interval in Z-richting - + Distance and orientation of intervals in Axis direction Afstand en richting van het interval in As-richting - + Center point Middelpunt - + Angle to cover with copies Hoek om te dekken met kopieën - + Specifies if copies must be fused (slower) Geeft aan of de kopieën moeten samensmelten (trager) - + The path object along which to distribute objects Het trajectobject waarlangs de objecten gedistribueerd moeten worden - + Selected subobjects (edges) of PathObj Geselecteerde subobjecten (kanten) fan PathObj - + Optional translation vector Optionele translatievector - + Orientation of Base along path Richting van de basis volgens het pad - + X Location X locatie - + Y Location Y locatie - + Z Location Z locatie - + Text string Tekstreeks - + Font file name Lettertype bestandsnaam - + Height of text Teksthoogte - + Inter-character spacing Tussentekenafstand - + Linked faces Gekoppelde vlakken - + Specifies if splitter lines must be removed Geeft aan of de splitslijnen verwijderd worden moeten - + An optional extrusion value to be applied to all faces Een optionele extrusiewaarde die op alle vlakken toegepast moet worden - + Height of the rectangle Hoogte van de rechthoek - + Horizontal subdivisions of this rectangle Horizontale onderverdelingen van deze rechthoek - + Vertical subdivisions of this rectangle Verticale onderverdelingen van deze rechthoek - + The placement of this object De plaatsing van dit object - + The display length of this section plane De weergavelengte van dit sectievlak - + The size of the arrows of this section plane De grootte van de pijlen van dit sectievlak - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects Het basisobject is de draad, deze is gevormd uit 2 objecten - + The tool object is the wire, it's formed from 2 objects Het gereedschapsobject is de draad, deze is gevormd uit 2 objecten - + The length of the straight segment De lengte van het rechte segment - + The point indicated by this label Het punt aangegeven door dit label - + The points defining the label polyline De punten die de polylijn van het label definiëren - + The direction of the straight segment De richting van het rechte segment - + The type of information shown by this label Het type informatie dat door dit label wordt weergegeven - + The target object of this label Het doelobject van dit label - + The text to display when type is set to custom De tekst die weergegeven moet worden wanneer het type ingesteld is op aangepast - + The text displayed by this label De tekst die door dit label wordt weergegeven - + The size of the text De grootte van de tekst - + The font of the text Het lettertype van de tekst - + The size of the arrow De grootte van de pijl - + The vertical alignment of the text De verticale uitlijning van de tekst - + The type of arrow of this label Het pijltype van dit label - + The type of frame around the text of this object Het kadertype rond de tekst van dit object - + Text color Tekst kleur - + The maximum number of characters on each line of the text box Het maximale aantal tekens op elke regel van het tekstvak - + The distance the dimension line is extended past the extension lines De afstand die de maatlijn voorbij de verlengingslijnen wordt verlengd - + Length of the extension line above the dimension line Lengte van de verlengingslijn boven de maatlijn - + The points of the B-spline De punten van de B-spline - + If the B-spline is closed or not Als de B-spline gesloten is of niet - + Tessellate Ellipses and B-splines into line segments Ellipsen en B-splines in lijnsegmenten betegelen - + Length of line segments if tessellating Ellipses or B-splines into line segments Lengte van lijnsegmenten als de ellipsen of B-splines in lijnsegmenten betegeld worden - + If this is True, this object will be recomputed only if it is visible Wanneer waar, wordt dit object alleen opnieuw berekend als het zichtbaar is - + Base Basis - + PointList PuntLijst - + Count Tellen - + The objects included in this clone De objecten inbegrepen in deze kloon - + The scale factor of this clone De schaalfactor van deze kloon - + If this clones several objects, this specifies if the result is a fusion or a compound Als dit meerdere objecten kloont, geeft dit aan of het resultaat een fusie of een samenstelling is - + This specifies if the shapes sew Dit geeft aan of de vormen zich hechten - + Display a leader line or not Toon een leiderslijn of niet - + The text displayed by this object De tekst die door dit object wordt weergegeven - + Line spacing (relative to font size) Lijnafstand (ten opzichte van de tekengrootte) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Helling - + Scale Schalen - + Writing camera position Camerapositie schrijven - + Writing objects shown/hidden state De weergegeven/verborgen staat van de objecten schrijven - + X factor X-factor - + Y factor Y-factor - + Z factor Z-factor - + Uniform scaling Uniforme schaalverdeling - + Working plane orientation Oriëntatie van het werkvlak @@ -781,20 +816,25 @@ Download en installeer ze handmatig vanuit het menu Tools -> Addon Manager - + This Wire is already flat Deze draad is al vlak - + Pick from/to points Kies van/naar punten - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Helling om geselecteerde draden/lijnen te geven: 0 = horizontaal, 1 = 45graden naar boven, -1 = 45graden naar beneden + + + Create a clone + Een kloon maken + DraftShapeStringGui @@ -862,12 +902,12 @@ vanuit het menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Voeg aan Constructiegroep toe - + Adds the selected objects to the Construction group Voegt de geselecteerde objecten toe aan de constructiegroep @@ -875,12 +915,12 @@ vanuit het menu Tools -> Addon Manager Draft_AddPoint - + Add Point Punt toevoegen - + Adds a point to an existing Wire or B-spline Voegt een punt toe aan een een bestaande draad of B-spline @@ -888,12 +928,12 @@ vanuit het menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Verplaats naar groep... - + Moves the selected object(s) to an existing group Verplaats de geselecteerde object(en) naar een bestaande groep @@ -901,12 +941,12 @@ vanuit het menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Huidige stijl toepassen - + Applies current line width and color to selected objects Huidige lijndikte en -kleur toepassen op geselecteerde objecten @@ -914,12 +954,12 @@ vanuit het menu Tools -> Addon Manager Draft_Arc - + Arc Boog - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ vanuit het menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ vanuit het menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ vanuit het menu Tools -> Addon Manager Draft_Array - + Array Reeks - + Creates a polar or rectangular array from a selected object Maak een polair of rechthoekige array van een geselecteerd object @@ -961,12 +1001,12 @@ vanuit het menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup Automatisch groeperen - + Select a group to automatically add all Draft & Arch objects to Selecteer een groep om automatisch alle Schets- & Arch-objecten toe te voegen @@ -974,12 +1014,12 @@ vanuit het menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Maakt een B-spline aan met meerdere punten. CTRL om te snappen, SHIFT om te beperken @@ -987,12 +1027,12 @@ vanuit het menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Hiermee maakt u een Bezier-curve. CTRL om te vangen, SHIFT om te beperken @@ -1000,7 +1040,7 @@ vanuit het menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ vanuit het menu Tools -> Addon Manager Draft_Circle - + Circle Cirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Hiermee maakt u een cirkel. CTRL om te snappen, ALT om rakende objecten te kiezen @@ -1021,12 +1061,12 @@ vanuit het menu Tools -> Addon Manager Draft_Clone - + Clone Kopieer - + Clones the selected object(s) Kopieer het/de geselecteerde(e) object(en) @@ -1034,12 +1074,12 @@ vanuit het menu Tools -> Addon Manager Draft_CloseLine - + Close Line Sluit lijn - + Closes the line being drawn Sluit de getekende lijn @@ -1047,12 +1087,12 @@ vanuit het menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Punt verwijderen - + Removes a point from an existing Wire or B-spline Verwijdert een punt uit een bestaande draad of B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Afmeting - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Hiermee maakt u een dimensie. CTRL om te snappen, SHIFT om te beperken, ALT om een segment te kiezen @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Vorige versie - + Explodes the selected objects into simpler objects, or subtracts faces Explodeert de geselecteerde objecten in eenvoudigere objecten, of verwijdert vlakken @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Van klad naar schets - + Convert bidirectionally between Draft and Sketch objects Converteer bidirectioneel tussen Draft en Sketch objecten @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Tekening - + Puts the selected objects on a Drawing sheet Zet de geselecteerde objecten op een tekenplaat @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Bewerken - + Edits the active object Bewerkt het actieve object @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellips - + Creates an ellipse. CTRL to snap Hiermee maakt u een ellips. CTRL om te vangen @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Vlakenbinder - + Creates a facebinder object from selected face(s) Creëert een vlakkenbinder object van geselecteerde vlak(en) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Voltooi lijn - + Finishes a line without closing it Voltooit een lijn zonder deze te sluiten @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Afmeting spiegelen - + Flip the normal direction of a dimension Keer de normaal richting van een maat om @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Repareer - + Heal faulty Draft objects saved from an earlier FreeCAD version Repareer beschadigde Draft objecten van een oudere FreeCAD versie @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Maakt een label aan, eventueel toegevoegd aan een geselecteerd object of element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Lijn - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Hiermee maakt u een 2-punts lijn. CTRL om te snappen, SHIFT om te beperken @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Spiegelen - + Mirrors the selected objects along a line defined by two points Spiegelt de geselecteerde objecten langs een lijn redefiniert door twee punten @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Verplaatsen - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Verschuiving - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Verschuift het actieve object. CTRL om te snappen, SHIFT om te beperken, ALT om te kopiëren @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Padpatroon - + Creates copies of a selected object along a selected path. Maakt kopieën van een geselecteerd object langs een geselecteerd pad. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punt - + Creates a point object Maak een punt object @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Puntenreeks - + Creates copies of a selected object on the position of points. Maakt kopieën aan van een geselecteerd object op de positie van punten. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Veelhoek - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Creëert een regelmatige veelhoek. CTRL om te snappen, SHIFT te beperken @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rechthoek - + Creates a 2-point rectangle. CTRL to snap Hiermee maakt u een 2-punts rechthoek. CTRL om te snappen @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Draaien - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Draait de geselecteerde objecten. CTRL om te snappen, SHIFT om te beperken, ALT om een kopie te creëren @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Schalen - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Schaalt de geselecteerde objecten uit een basispunt. CTRL om te srpingen, SHIFT om te beperken, ALT om te kopiëren @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Selecteer groep - + Selects all objects with the same parents as this group Selecteert alle objecten met dezelfde ouders als deze groep @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Selecteer vlak - + Select a working plane for geometry creation Selecteer een werkvlak om geometrie te creëren @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Maakt een proxy-object aan van het huidige werkvlak - + Create Working Plane Proxy Maak proxy van het werkvlak aan @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D-uitzichtvorm - + Creates Shape 2D views of selected objects Maakt 2D-uitzichtvormen van geselecteerde objecten @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Vorm van tekst... - + Creates text string in shapes. Hiermee maakt u een tekst in vormen. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Toon Snap Werkbalk - + Shows Draft snap toolbar Toont Draft snap werkbalk @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Helling instellen - + Sets the slope of a selected Line or Wire Stelt de helling van een geselecteerde lijn of draad in @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Hoeken - + Snaps to 45 and 90 degrees points on arcs and circles Vangt op 45 en 90 graden op bogen en cirkels @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Middelpunt - + Snaps to center of circles and arcs Vangt op het middelpunt van cirkels en bogen @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensies - + Shows temporary dimensions when snapping to Arch objects Toont tijdelijke bemating terwijl men snapt aan Arch objecten @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Eindpunt - + Snaps to endpoints of edges Snapt aan eindpunten van ribbes @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensie - + Snaps to extension of edges Snapt aan het verlengde van ribbes @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Raster - + Snaps to grid points Vangt op rasterpunten @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Snijpunt - + Snaps to edges intersections Vangt op snijpunten van randen @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off In-/ uitschakelen - + Activates/deactivates all snap tools at once Activeert deactiveert/alle vanghulpmiddelen in één keer - + Lock Vergrendelen @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Midden - + Snaps to midpoints of edges Vangt op het midden van randen @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Dichtstbijzijnde - + Snaps to nearest point on edges Vangt op het dichtstbijzijnde punt op randen @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Vangt op orthogonale en 45 graden richtingen @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Evenwijdig - + Snaps to parallel directions of edges Snapt aan parallelen richtingen van ribbes @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Loodrecht - + Snaps to perpendicular points on edges Snapt aan rechthoekige punten aan ribbes @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snapt naar speciale locaties van de objecten @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Werkvlak - + Restricts the snapped point to the current working plane Beperkt het gesnapte punt tot beweging in het huidige werkvlak @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Delen - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Rekt de geselecteerde objecten uit @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Hiermee maakt u een aantekening. CTRL op te snappen @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Schakelt de Bouw-modus voor de volgende objecten aan/uit. - + Toggle Construction Mode Constructiemodus omschakelen @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Schakel Continue Modus - + Toggles the Continue Mode for next commands. Schakelt de vervolg-modus voor de volgende opdrachten. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Wissel weergave-modus - + Swaps display mode of selected objects between wireframe and flatlines Schakelt weergavemodus van geselecteerde objecten tussen wireframe en flatlines @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Schakel raster - + Toggles the Draft grid on/off Schakel draft raster aan/uit - + Grid Raster - + Toggles the Draft grid On/Off Schakelt het schetsraster in/uit @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trimt of breidt het geselecteerde object uit, of extrudeert enkele oppervlakken. CTRL snapt, SHIFT, beperkt tot huidige segment of tot de normale, ALT omkeert @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Maak laatste segment ongedaan - + Undoes the last drawn segment of the line being drawn Verwijdert het laatst getekende segment van de lijn die wordt getekend @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Opwaarderen - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Voegt de geselecteerde objecten samen tot één of converteert gesloten draden naar gevulde vlakken of verenigt vlakken - - Draft_VisGroup - - - VisGroup - Visuele Groep - - - - Adds a VisGroup - Voeg toe aan Visuele Groep - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Het creëren van een veelvoudig-punt onderwerp (DWire). Druk op CTRL en SHIFT te gelijker tijd + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Draad naar B-spline - + Converts between Wire and B-spline Converteert tussen draad en B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Algemene ontwerpinstellingen - + This is the default color for objects being drawn while in construction mode. Dit is de gekozen kleur voor objecten getekend in constructie-modus - + This is the default group name for construction geometry Dit is de standaard groepsnaam voor de constructie geometrie - + Construction Constructie @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSla de huidige kleur en lijnbreedte op voor alle sessies - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Als dit is aangevinkt zal de 'kopie' modus gehandhaafd worden doorheen opeenvolgende commando's. Kopie modus kan uitgeschakeld worden door het aanvinken ongedaan te maken. - + Global copy mode Globale kopieermodus - + Default working plane Standaard werkvlak - + None Geen - + XY (Top) XY (Bovenkant) - + XZ (Front) XZ (voorkant) - + YZ (Side) YZ (zijkant) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Algemene instellingen - + Construction group name Bouwgroepsnaam - + Tolerance Tolerantie @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Hier kunt u een map aanduiden met SVG bestanden die <pattern> definities bevat die toegevoegd aan de standaard Draft hatch patronen zullen zijn - + Draft interface mode Draft interfacemodus - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Dit is de UI-modus waarin de Draft module zal werken: werkbalk modus zal alle ontwerp-instellingen in een aparte werkbalk plaatsen, terwijl taakzicht modus zal het FreeCAD Taskview systeem gebruiken voor alle haar gebruikersinteractie - + Toolbar Werkbalk - + Taskview Taakzicht @@ -2060,12 +2095,12 @@ such as "Arial:Bold" ALT modus - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normaal, na het kopiëren van objecten, worden de kopieën geselecteerd. Als deze optie is aangevinkt, zullen de basisobjecten in plaats daarvan worden geselecteerd. - + Select base objects after copying Selecteer basisobjecten na het kopiëren @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Hoofdlijnen worden dikker getrokken. Geef hier aan hoeveel ruitjes tussen de hoofdlijnen. - + Internal precision level Interne precisie-niveau @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Vertaal witte lijnkleur naar zwart - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Als u dit selectievakje aanvinkt, zullen de schetsgereedschappen, indien beschikbaar, deelbasisvormen aanmaken in plaats van schetsobjecten. - + Use Part Primitives when available Gebruik deelbasisvormen indien beschikbaar @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Altijd uitlijnen (schakel de snapmodus uit) - - Construction geometry - Constructie geometrie - - - + Construction geometry color Kleur van de bouwgeometrie @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Kies een lettertypebestand - + Fill objects with faces whenever possible Vul, waar mogelijk, de objecten op met vlakken @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatische update (alleen oud importeerprogramma) - + Prefix labels of Clones with: Voorvoegsellabels van klonen met: @@ -2714,7 +2744,7 @@ Bijv: voor bestanden in millimeters: 1, in centimeters: 10, in meters: 1000, in Dit is de methode die gekozen is voor het importeren van de SVG-objectkleur in FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Als u dit selectievakje aanvinkt, verschijnen de objecten als standaard gevuld. Anders verschijnen ze als draadmodel @@ -2794,17 +2824,7 @@ Bijv: voor bestanden in millimeters: 1, in centimeters: 10, in meters: 1000, in Als dit aangevinkt is, zullen objecten uit dezelfde lagen samengevoegd worden in ontwerpblokken, waardoor het scherm sneller weergegeven wordt, maar minder gemakkelijk bewerkt kunnen worden - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Als u dit selectievakje aanvinkt, zullen stapsgewijze instructies weergegeven worden in het uitvoervenster bij het uitvoeren van ontwerpopdrachten - - - - Verbose command line mode - Uitgebreide opdrachtregelmodus - - - + When drawing lines, set focus on Length instead of X coordinate Bij het tekenen van lijnen, focus instellen op Lengte in plaats van X-coördinaat @@ -2884,12 +2904,12 @@ Bijv: voor bestanden in millimeters: 1, in centimeters: 10, in meters: 1000, in Max. Splinesegment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,694 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relatief + + + + R + R + + + + Continue + Doorgaan + + + + T + T + + + + Close + Sluiten + + + + O + O + + + + Copy + Kopie + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Vullen + + + + L + L + + + + Exit + Afsluiten + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Lengte + + + + H + H + + + + Wipe + Wissen + + + + W + W + + + + Set WP + WV instellen + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + X beperken + + + + X + X + + + + Restrict Y + Y beperken + + + + Y + Y + + + + Restrict Z + Z beperken + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Ontwerpsnap - - - Draft creation tools - Ontwerpaanmaakgereedschap - - - - Draft modification tools - Ontwerpwijzigingsgereedschap - - - - Utilities - Hulpmiddelen - - - - Wire tools - Draadwerktuigen - - - - Snapping - Magnetisch uitlijnen - draft - + not shape found vorm niet gevonden - + All Shapes must be co-planar Alle vormen moeten coplanair zijn - + The given object is not planar and cannot be converted into a sketch. Het gegeven object is niet vlak en kan niet omgezet worden in een schets. - + Unable to guess the normal direction of this object Kan de normale richting van dit object niet raden - + Draft Command Bar Ontwerpopdrachtbalk - + Toggle construction mode Constructiemodus omschakelen - + Current line color Huidige lijnkleur - + Current face color Huidige vlakkleur - + Current line width Huidige lijnbreedte - + Current font size Huidige lettertypegrootte - + Apply to selected objects Toepassen op geselecteerde objecten - + Autogroup off Autogroup uit - + active command: actieve opdracht: - + None Geen - + Active Draft command Actieve opdracht - + X coordinate of next point X-coördinaat van het volgende punt - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-coördinaat van het volgende punt - + Z coordinate of next point Z-coördinaat van het volgende punt - + Enter point Punt invoeren - + Enter a new point with the given coordinates Voer een nieuw punt in met de gegeven coördinaten - + Length Lengte - + Angle Hoek - + Length of current segment Lengte van het huidige segment - + Angle of current segment Hoek van het huidige segment - + Radius Straal - + Radius of Circle Straal van de cirkel - + If checked, command will not finish until you press the command button again Indien ingeschakeld, zal de huidige opdracht niet beëindigen totdat u opnieuw op de command-toets druk - + If checked, an OCC-style offset will be performed instead of the classic offset Indien ingeschakeld, zal een OCC-stijl verschuiving worden uitgevoerd in plaats van de klassieke stijl - + &OCC-style offset &OCC-stijl verschuiving - + Add points to the current object Punten aan het huidige object toevoegen - + Remove points from the current object Punten van het huidige object verwijderen - + Make Bezier node sharp Maak het Bezier-knooppunt hoekig - + Make Bezier node tangent Maak het Bezier-knooppunt tangentieel - + Make Bezier node symmetric Maak het Bezier-knooppunt symmetrisch - + Sides Zijkanten - + Number of sides Aantal zijden - + Offset Verschuiving - + XY (top) XY (bovenaan) - - Select XY plane - Selecteer XY-vlak - - - + XZ (front) XZ (voor) - - Select XZ plane - Selecteer XY-vlak - - - + YZ (side) YZ (zijkant) - - Select YZ plane - Selecteer YZ vlak - - - + View Weergave - - Select plane perpendicular to the current view - Selecteer een vlak loodrecht op het huidige aanzicht - - - + Auto Automatisch - - Do not project points to a drawing plane - Projecteer geen punten naar een tekenvlak - - - + Text string to draw Tekstreeks om te tekenen - + String Tekenreeks - + Height of text Teksthoogte - + Height Hoogte - + Intercharacter spacing Tekenafstand - + Tracking Volgen - + Full path to font file: Volledig traject naar lettertypebestand: - + Open a FileChooser for font file Open een Bestandkiezer voor het lettertypebestand - + Grid spacing Rasterafstand - + The spacing between the grid lines De afstand tussen de rasterlijnen - + Main line every Hoofdlijn elk - + The number of lines between main lines Het aantal lijnen tussen de hoofdlijnen - + Center plane on view Middenvlak op zicht - - Select Plane - Selecteer vlak - - - + Line Lijn - + DWire DWire - + Circle Cirkel - + Center X Middelpunt X - + Arc Boog - + Point Punt - + Label Label - + Distance Afstand - + Trim Trim - + Pick Object Selecteer object - + Edit Bewerken - + Global X Globale X - + Global Y Globale Y - + Global Z Globale Z - + Local X Lokale X - + Local Y Lokale Y - + Local Z Lokale Z - + Invalid Size value. Using 200.0. Ongeldige groottewaarde. 200.0 wordt gebruikt. - + Invalid Tracking value. Using 0. Ongeldige kerningwaarde. 0 wordt gebruikt. - + Please enter a text string. Voer een tekstreeks in. - + Select a Font file Kies een lettertypebestand - + Please enter a font file. Voer een lettertypebestand in. - + Autogroup: Autogroeperen: - + Faces Vlakken - + Remove Verwijderen - + Add Toevoegen - + Facebinder elements Vlakenbinderelementen - + Create Line Lijn aanmaken - - Pick next point: - - Kies volgende punt: - - - + Convert to Wire Converteren naar draad - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve BezCurve aanmaken - + Rectangle Rechthoek - + Create Plane Vlak aanmaken - + Create Rectangle Rechthoek aanmaken - + Create Circle Cirkel aanmaken - + Create Arc Boog aanmaken - + Start Angle Starthoek - + Aperture Opening - + Polygon Veelhoek - + Create Polygon Veelhoek aanmaken - + Ellipse Ellips - + Create Ellipse Ellips aanmaken - + Text Tekst - + Create Text Tekst aanmaken - + Dimension Afmeting - + Create Dimension Dimensie aanmaken - + ShapeString Tekenreeksvorm - + Create ShapeString ShapeString aanmaken - + Copy Kopie - + Move Verplaatsen - + Change Style Stijl wijzigen - + Rotate Draaien - - Cannot offset this object type - - Dit objecttype niet kan verschuift worden - - - - + Stretch Stretch - + Upgrade Opwaarderen - + Downgrade Vorige versie - + Selection is not a Knot De selectie is geen knoop - + Convert to Sketch Converteren naar schets - + Convert to Draft Converteren naar ontwerp - + Convert Converteer - + Array Reeks - + Create Point Punt aanmaken - + Mirror Spiegelen - + &Draft &Schets @@ -3611,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja. - + Draft.makeBSpline: not enough points Draft.makeBSpline: niet genoeg punten - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Gelijke eindpunten geforceerd gesloten - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Ongeldige puntenlijst - + No object given Geen object gegeven - + The two points are coincident De twee punten vallen samen - + Found groups: closing each open object inside Gevonden groepen: sluiting van elk open object binnenin - + Found mesh(es): turning into Part shapes Een of meerdere mesh(es) gevonden: veranderen in deelvormen - + Found 1 solidifiable object: solidifying it 1 object gevonden welke massief kan worden gemaakt: Maak deze nu massief - + Found 2 objects: fusing them 2 objecten gevonden: ze samenvoegen - + Found several objects: creating a shell Verschillende objecten gevonden: een schil maken - + Found several coplanar objects or faces: creating one face Verschillende coplanaire objecten of vlakken gevonden: één gezicht aanmaken - + Found 1 non-parametric objects: draftifying it 1 niet-parametrische object gevonden: ontwerp aanmaken - + Found 1 closed sketch object: creating a face from it 1 gesloten schetsobject gevonden: er een gezicht van maken - + Found 1 linear object: converting to line 1 lineair object gevonden: naar lijn converteren - + Found closed wires: creating faces Gesloten draden gevonden: vlakken aanmaken - + Found 1 open wire: closing it 1 open draad gevonden: word gesloten - + Found several open wires: joining them Verscheidene open draden gevonden: worden samengevoegd - + Found several edges: wiring them Verscheidene randen gevonden: worden aan elkaar verbonden - + Found several non-treatable objects: creating compound Verschillende niet-behandelbare objecten gevonden: samenstellingen worden aangemaakt - + Unable to upgrade these objects. Kan deze objecten niet upgraden. - + Found 1 block: exploding it 1 blok gevonden: wordt opgeblazen - + Found 1 multi-solids compound: exploding it 1 samenstelling van meerdere volumemodellen gevonden: het opblazen - + Found 1 parametric object: breaking its dependencies 1 parametrisch object gevonden: de afhankelijkheden ervan breken - + Found 2 objects: subtracting them 2 objecten gevonden: hiervan aftrekken - + Found several faces: splitting them Verschillende gezichten gevonden: ze splitsen - + Found several objects: subtracting them from the first one Verschillende objecten gevonden: deze van de eerste aftrekken - + Found 1 face: extracting its wires 1 vlak gevonden: de draden eruit trekken - + Found only wires: extracting their edges Alleen draden gevonden: randen uittrekken - + No more downgrade possible Geen downgrade meer mogelijk - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Gesloten met hetzelfde eerste/laatste punt. Geometrie niet bijgewerkt. - + No point found Geen punt gevonden - + ShapeString: string has no wires ShapeString: tekenreeks heeft geen draden - + Relative Relatief - + Continue Doorgaan - + Close Sluiten @@ -3828,7 +3995,7 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Z beperken - + Select edge Selecteer rand @@ -3843,7 +4010,7 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Lengtemodus - + Wipe Wissen @@ -3858,454 +4025,279 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Cycle snap object - + Check this to lock the current angle Vink dit aan om de huidige hoek te vergrendelen - + Coordinates relative to last point or absolute Coördinaten ten opzichte van het laatste punt of absoluut - + Filled Gevuld - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Vink dit aan als het object als gevuld moet worden weergegeven, anders wordt het als draadmodel weergegeven - - - + Finish Voltooien - + Finishes the current drawing or editing operation Beëindigt de huidige tekening of bewerking - + &Undo (CTRL+Z) &Ongedaan maken (CTRL+Z) - + Undo the last segment Maak het laatste segment ongedaan - + Finishes and closes the current line Eindigt en sluit de huidige lijn - + Wipes the existing segments of this line and starts again from the last point Wist de bestaande segmenten van deze lijn en begint opnieuw vanaf het laatste punt - + Set WP WV instellen - + Reorients the working plane on the last segment Heroriënteert het werkvlak op het laatste segment - + Selects an existing edge to be measured by this dimension Selecteert een bestaande rand die door deze afmeting gemeten moet worden - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Indien aangevinkt, zullen de objecten gekopieerd worden in plaats van verplaatst. Voorkeuren -> Ontwerp -> Globale kopieermodus om deze modus in de volgende opdrachten te behouden - - options - opties - - - + Default Standaard - + Pick a face to define the drawing plane Kies een vlak om het tekenvlak te definiëren - - First point: - Eerste punt: - - - - Closing - Sluiting - - - + Create Wire Draad aanmaken - - Removing last point - Laatste punt verwijderen - - - - Next point: - Volgende punt: - - - - Restarting from - Herstarten vanaf - - - + Unable to create a Wire from selected objects Kan geen draad maken van de geselecteerde objecten - + Spline has been closed Spline is gesloten - + Last point has been removed Het laatste punt is verwijderd - - Pick next point, or Finish (shift-F) or close (o): - Kies het volgende punt, of afwerken (shift-F) of sluiten (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed De bezier-curve is gesloten - - Pick first point: - Kies het startpunt: - - - - Pick opposite point: - Kies het tegenovergestelde punt: - - - - Pick center point: - Kies het middelpunt: - - - - Pick radius: - Kies de straal: - - - - Pick start angle: - Kies de starthoek: - - - - Pick aperture: - Kies de opening: - - - - Aperture angle: - Openingshoek: - - - - Pick location point: - Kies het locatiepunt: - - - + Edges don't intersect! De randen snijden elkaar niet! - + Pick ShapeString location point: Kies het ShapeString-locatiepunt: - + Select an object to move Selecteer een object om te verplaatsen - - Pick start point: - Kies het startpunt: - - - - Pick end point: - Kies het eindpunt: - - - + Select an object to rotate Selecteer een object om te roteren - - Pick rotation center: - Kies het rotatiemiddelpunt: - - - - Pick base angle: - Kies de basishoek: - - - - Pick rotation angle: - Kies de rotatiehoek: - - - + Select an object to offset Selecteer een object om te verschuiven - + Offset only works on one object at a time Verschuiving werkt maar op één object tegelijk - + Sorry, offset of Bezier curves is currently still not supported Sorry, de verschuiving van Bezier-curven wordt momenteel nog steeds niet ondersteund - - Pick distance: - Kies de afstand: - - - + Select an object to stretch Selecteer een object om uit te rekken - - Pick first point of selection rectangle: - Kies het eerste punt van de selectierechthoek: - - - - Pick opposite point of selection rectangle: - Kies het tegenovergestelde punt van de selectierechthoek: - - - - Pick start point of displacement: - Kies het startpunt van verplaatsing: - - - - Pick end point of displacement: - Kies het eindpunt van verplaatsing: - - - + Turning one Rectangle into a Wire Een rechthoek in een draad veranderen - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Selecteer een object om te upgraden - + Select object(s) to trim/extend Selecteer (een) object(en) om te trimmen/uit te breiden - + Unable to trim these objects, only Draft wires and arcs are supported Kan deze objecten niet trimmen, alleen ontwerpdraden en bogen worden ondersteund - + Unable to trim these objects, too many wires Kan deze objecten niet trimmen, te veel draden - + These objects don't intersect Deze objecten snijden elkaar niet - + Too many intersection points Te veel snijpunten - + Select an object to scale Selecteer een object om schaal te brengen - - Pick base point: - Kies het basispunt: - - - - Pick reference distance from base point: - Kies een referentieafstand vanaf het basispunt: - - - - Pick new distance from base point: - Kies een nieuwe afstand vanaf het basispunt: - - - + Select an object to project Selecteer een object om te projecteren - - This object type is not editable - Dit objecttype kan niet bewerkt worden - - - + Please select only one object Gelieve slechts één object te selecteren - + Select a Draft object to edit Selecteer een ontwerpobject om te bewerken - + Active object must have more than two points/nodes Het actieve object moet meer dan twee punten/knooppunten hebben - + Endpoint of BezCurve can't be smoothed Het eindpunt van de BezCurve kan niet geëffend worden - + Select an object to convert Selecteer een object om te converteren - + Select an object to array Selecteer een object voor de reeks - + Please select base and path objects Selecteer de basis- en trajectobjecten - + Please select base and pointlist objects Gelieve de basis- en puntlijstobjecten te selecteren - + Select an object to clone Selecteer een object om te klonen - + Select face(s) on existing object(s) Selecteer een of meerdere vlak(en) op de bestaande objecten - + Select an object to mirror Selecteer een object om te spiegelen - - Pick start point of mirror line: - Kies het beginpunt van de spiegellijn: - - - - Pick end point of mirror line: - Kies het eindpunt van de spiegellijn: - - - + This tool only works with Wires and Lines Dit gereedschap werkt alleen met draden en lijnen - - - Pick target point: - Kies het doelpunt: - - - - Pick endpoint of leader line: - Kies het eindpunt van de leiderslijn: - - - - Pick text position: - Kies de tekstpositie: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA-bestandsconverter (voorheen Teigha) niet gevonden, DWG-ondersteuning is uitgeschakeld - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4315,56 +4307,354 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Schalen - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Boven + + + + Front + Voorkant + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatisch + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotatie + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Schets + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Hulpmiddelen + + + + Wire tools + Draadwerktuigen + + + + Snapping + Magnetisch uitlijnen + diff --git a/src/Mod/Draft/Resources/translations/Draft_no.qm b/src/Mod/Draft/Resources/translations/Draft_no.qm index 65886a3c6a..549a4ccbc1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_no.qm and b/src/Mod/Draft/Resources/translations/Draft_no.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_no.ts b/src/Mod/Draft/Resources/translations/Draft_no.ts index 8ae2f916d8..5c29481aab 100644 --- a/src/Mod/Draft/Resources/translations/Draft_no.ts +++ b/src/Mod/Draft/Resources/translations/Draft_no.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definerer et hatch mønster - + Sets the size of the pattern Setter mønsterstørrelse - + Startpoint of dimension Startpunkt for dimensjon - + Endpoint of dimension Endepunkt for dimensjon - + Point through which the dimension line passes Punkt som dimensioneringslinjen går gjennom - + The object measured by this dimension Objektet målt av denne dimensjoneringen - + The geometry this dimension is linked to Geometrien denne dimensjoneringen er tilknyttet - + The measurement of this dimension Målingen av denne dimensjoneringen - + For arc/circle measurements, false = radius, true = diameter For bue/sirkelmålinger, falsk = radius, sann = diameter - + Font size Font size - + The number of decimals to show Antall desimaler som skal vises - + Arrow size Pilstørrelse - + The spacing between the text and the dimension line Avstanden mellom teksten og dimensjoneringslinjen - + Arrow type Piltype - + Font name Skriftnavn - + Line width Line width - + Line color Linjefarge - + Length of the extension lines Lengde på forlengelseslinjene - + Rotate the dimension arrows 180 degrees Drei dimensjonspilene 180 grader - + Rotate the dimension text 180 degrees Drei dimensjonsteksten 180 grader - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Tekstoverstyring. Bruk $dim for å sette dimensjonslengden - + A unit to express the measurement. Leave blank for system default En enhet for å uttrykke målingen. La stå tom for systemstandard - + Start angle of the dimension Startvinkel på dimensjoneringen - + End angle of the dimension Sluttvinkel på dimensjoneringen - + The center point of this dimension Midtpunktet av denne dimensjoneringen - + The normal direction of this dimension Normalen til denne dimensjonen - + Text override. Use 'dim' to insert the dimension length Tekstoverstyring. Bruk 'dim' for å sette dimensjonens lengde - + Length of the rectangle Lengden av rektangelet - + Radius to use to fillet the corners Radius for å bruke til å runde av kantene - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Lag en overflate - + Defines a texture image (overrides hatch patterns) Definerer et teksturbilde (overstyrer hatch mønstre) - + Start angle of the arc Startvinkel på buen - + End angle of the arc (for a full circle, give it same value as First Angle) Sluttvinkel på buen (for en full sirkel, gi samme verdi som Første vinkel) - + Radius of the circle Sirkelradius - + The minor radius of the ellipse Den minste ellipseradiusen - + The major radius of the ellipse Den største ellipseradiusen - + The vertices of the wire Punktene til kantlinjene - + If the wire is closed or not Dersom kantlinjene er lukket er ikke - + The start point of this line Startpunktet for denne linjen - + The end point of this line Sluttpunktet for denne linjen - + The length of this line Lengden av denne linjen - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge Antall underdelinger av hver kant - + Number of faces Antall overflater - + Radius of the control circle Radius av kontrollsirkelen - + How the polygon must be drawn from the control circle Hvordan polygonen må tegnes fra kontrollsirkelen - + Projection direction Projiseringsretning - + The width of the lines inside this object Bredden på linjene inne i dette objektet - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text Avstanden mellom linjer med tekst - + The color of the projected objects Fargen på de projiserte objekter - + The linked object The linked object - + Shape Fill Style Shape Fill Style - + Line Style Linjestil - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parametriseringsfaktor - + The points of the Bezier curve Punktene til Bezier-kurven - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Vis skjulte linjer - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Number of copies Number of copies - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Location - + Y Location Y Location - + Z Location Z Location - + Text string Text string - + Font file name Font file name - + Height of text Height of text - + Inter-character spacing Inter-character spacing - + Linked faces Sammenkoblede flater - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object Plasseringen av dette objektet - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Base - + PointList PointList - + Count Antall - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Skaler - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Legg til punkt - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Bruk gjeldende stil - + Applies current line width and color to selected objects Legg til gjeldende linjebredde og farge på valgte objekter @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Bue - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Matrise - + Creates a polar or rectangular array from a selected object Oppretter en polar eller rektangulær matrise av et merket objekt @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Sirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Lager en sirkel. CTRL for magnet/ ALT velger tangent til objekter @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Klone - + Clones the selected object(s) Kloner valgte objektet @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Lukk linje - + Closes the line being drawn Lukker linja som blir tegnet @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Fjern punkt - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensjon - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Lager en dimensjon. CTRL for magnet/ SHIFT for å låse/ ALT for å velge et segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Nedgrader - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Utkast til skisse - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Tegning - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Rediger - + Edits the active object Redigerer aktivt objekt @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Overflatebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Avslutt linje - + Finishes a line without closing it Avslutter en linje uten å lukke den @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linje - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Lager en 2-punkts linje. CTRL for magnet / SHIFT for å låse @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Mirror - + Mirrors the selected objects along a line defined by two points Mirrors the selected objects along a line defined by two points @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Flytt - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Avsetting - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Forskyver aktivt objekt. CTRL for magnet/ SHIFT for å låse/ ALT for å kopiere @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Point - + Creates a point object Oppretter et punktobjekt @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Lager en vanlig polygon. CTRL for magnet/ SHIFT for å låse @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rektangel - + Creates a 2-point rectangle. CTRL to snap Lager et 2-punkts rektangel. CTRL for magnet @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Roter - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roterer valgte objekter. CTRL for magnet/ SKIFT for å låse/ ALT lager en kopi @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skaler - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skalerer valgte objekter fra et basepunkt. CTRL for magnet/ SHIFT for å låse/ ALT for å kopiere @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Velg gruppe - + Selects all objects with the same parents as this group Merker alle objekter med samme overordnede som denne gruppen @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Velg plan - + Select a working plane for geometry creation Velg et arbeidsplan for opprettelse av geometri @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Figur 2D-visning - + Creates Shape 2D views of selected objects Oppretter figur 2D-visning for valgte objekter @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Vinkler - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Kryssningspunkt - + Snaps to edges intersections Snaps to edges intersections @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Aktiverer/deaktiverer alle snap-verktøy samtidig - + Lock Lock @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Lager en merknad. CTRL for magnet @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Veksler konstruksjonsmodus for neste objekter. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode for next commands. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Bytt visningsmodus - + Swaps display mode of selected objects between wireframe and flatlines Bytter visningsmodus på utvalgte objekter mellom trådrammer og flatlinjer @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Toggle Grid - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid Grid - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Angre siste segment - + Undoes the last drawn segment of the line being drawn Angrer siste segment på linjen som blir tegnet @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Oppgrader - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Generelle innstillinger for utkast - + This is the default color for objects being drawn while in construction mode. Dette er standard farge for objekter tegnet i konstruksjonmodus. - + This is the default group name for construction geometry Dette er standard gruppenavn for konstruksjongeometri - + Construction Konstruksjon @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainLagre gjeldende farge og linjebredde på tvers av økter - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode dersom denne er avkryssa vil kopieringsmodus beholdes på tvers av kommandoen, ellers vil kommandoer alltid starte i ikke kopieringsmodus - + Global copy mode Global kopieringsmodus - + Default working plane Standard arbeidsplan - + None Ingen - + XY (Top) XY (Topp) - + XZ (Front) XZ (Front) - + YZ (Side) YZ (Side) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Generelle innstillinger - + Construction group name Konstruksjonsgruppenavn - + Tolerance Toleranse @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns - + Draft interface mode Draft interface mode - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction - + Toolbar Toolbar - + Taskview Taskview @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - + Select base objects after copying Select base objects after copying @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Mainlines will be drawn thicker. Specify here how many squares between mainlines. - + Internal precision level Internal precision level @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Translate white line color to black - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Always snap (disable snap mod) - - Construction geometry - Construction geometry - - - + Construction geometry color Construction geometry color @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Select a font file - + Fill objects with faces whenever possible Fill objects with faces whenever possible @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2714,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2794,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2884,12 +2904,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,693 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Lukk + + + + O + O + + + + Copy + Kopier + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Lengde + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Draft creation tools - - - - Draft modification tools - Draft modification tools - - - - Utilities - Utilities - - - - Wire tools - Wire tools - - - - Snapping - Snapping - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Gjeldende overflatefarge - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Bruk på valgte objekter - + Autogroup off Autogroup off - + active command: aktiv kommando: - + None Ingen - + Active Draft command Aktiv kommando - + X coordinate of next point X koordinat for neste punkt - + X X - + Y Y - + Z Z - + Y coordinate of next point Y koordinat for neste punkt - + Z coordinate of next point Z koordinat for neste punkt - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length Lengde - + Angle Vinkel - + Length of current segment Length of current segment - + Angle of current segment Angle of current segment - + Radius Radius - + Radius of Circle Sirkelradius - + If checked, command will not finish until you press the command button again Hvis denne er merket vil kommandoen ikke bli fullført før du trykker kommandoknappen igjen - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset &OCC-style offset - + Add points to the current object Legg punkter til det gjeldende objekt - + Remove points from the current object Remove points from the current object - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Sides - + Number of sides Antall sider - + Offset Avsetting - + XY (top) XY (top) - - Select XY plane - Velg XY plan - - - + XZ (front) XZ (front) - - Select XZ plane - Velg XZ plan - - - + YZ (side) YZ (side) - - Select YZ plane - Velg YZ plan - - - + View Vis - - Select plane perpendicular to the current view - Velg plan vinkelrett på gjeldende visning - - - + Auto Auto - - Do not project points to a drawing plane - Ikke vis punkter på et tegningsplan - - - + Text string to draw Text string to draw - + String Streng - + Height of text Height of text - + Height Høyde - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing Grid spacing - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Velg plan - - - + Line Linje - + DWire DWire - + Circle Sirkel - + Center X Senter X - + Arc Bue - + Point Point - + Label Label - + Distance Avstand - + Trim Trim - + Pick Object Velg objekt - + Edit Rediger - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Autogroup: Autogroup: - + Faces Flater - + Remove Fjern - + Add Legg til - + Facebinder elements Facebinder elements - + Create Line Create Line - - Pick next point: - - Velg neste punkt: - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Create BezCurve - + Rectangle Rektangel - + Create Plane Create Plane - + Create Rectangle Create Rectangle - + Create Circle Create Circle - + Create Arc Create Arc - + Start Angle Start Angle - + Aperture Blenderåpning - + Polygon Polygon - + Create Polygon Create Polygon - + Ellipse Ellipse - + Create Ellipse Create Ellipse - + Text Tekst - + Create Text Create Text - + Dimension Dimensjon - + Create Dimension Create Dimension - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Kopier - + Move Flytt - + Change Style Change Style - + Rotate Roter - - Cannot offset this object type - - Kan ikke avsette denne objekttypen - - - + Stretch Stretch - + Upgrade Oppgrader - + Downgrade Nedgrader - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Convert - + Array Matrise - + Create Point Create Point - + Mirror Mirror - + &Draft &Draft @@ -3610,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Lukk @@ -3827,7 +3995,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3842,7 +4010,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3857,454 +4025,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Fullfør - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Standard - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4314,56 +4307,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Skaler - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Topp + + + + Front + Front + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Draft + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilities + + + + Wire tools + Wire tools + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index 2dc1700579..d51bb97821 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index aa889a45f9..5c995ef9e3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definiuje wzorzec kreskowania - + Sets the size of the pattern Ustawia rozmiar wzoru - + Startpoint of dimension Punkt początkowy wymiaru - + Endpoint of dimension Punkt końcowy wymiaru - + Point through which the dimension line passes Punkt, przez który przechodzi linia wymiarowa - + The object measured by this dimension Obiekt mierzony tym wymiarem - + The geometry this dimension is linked to Geometria połączona z tym wymiarem - + The measurement of this dimension Miara tego wymiaru - + For arc/circle measurements, false = radius, true = diameter Miara łuku/okręgu, fałsz = promień, prawda = średnica - + Font size Wielkość czcionki - + The number of decimals to show Liczba dziesiętnych do pokazania - + Arrow size Rozmiar strzałki - + The spacing between the text and the dimension line Odstęp między tekstem a linią wymiarową - + Arrow type Styl strzałki - + Font name Nazwa czcionki - + Line width Szerekość linii - + Line color Kolor linii - + Length of the extension lines Długość linii pomocniczych - + Rotate the dimension arrows 180 degrees Obróć strzałki wymiarowe o 180 stopni - + Rotate the dimension text 180 degrees Obróć tekst wymiarowy o 180 stopni - + Show the unit suffix Pokaż symbol jednostki - + The position of the text. Leave (0,0,0) for automatic position Położenie tekstu. Pozostaw (0,0,0) jako pozycja automatyczna - + Text override. Use $dim to insert the dimension length Zastępowanie tekstu. Użyj $dim, aby wstawić wymiar - + A unit to express the measurement. Leave blank for system default Jednostka miary. Pozostaw puste aby użyć wartości domyślnej - + Start angle of the dimension Kąt początkowy wymiaru - + End angle of the dimension Kąt końcowy wymiaru - + The center point of this dimension Punkt środkowy tego wymiaru - + The normal direction of this dimension Normalny kierunek względem tego wymiaru - + Text override. Use 'dim' to insert the dimension length Zastępowanie tekstu. Użyj 'dim', aby wstawić wymiar - + Length of the rectangle Długość prostokąta - + Radius to use to fillet the corners Promień zaokrąglenia narożników - + Size of the chamfer to give to the corners Wymiar fazowania narożników - + Create a face Utwórz płaszczyznę - + Defines a texture image (overrides hatch patterns) Określa obraz tekstury (zastępuje wzory kreskowania) - + Start angle of the arc Kąt początkowy łuku - + End angle of the arc (for a full circle, give it same value as First Angle) Końcowy kąt łuku (dla pełnego okręgu, daj taką samą wartość jak dla pierwszego kąta) - + Radius of the circle Promień okręgu - + The minor radius of the ellipse Mniejszy promień elipsy - + The major radius of the ellipse Większy promień elipsy - + The vertices of the wire Wierzchołki łamanej - + If the wire is closed or not Czy łamana jest zamknięta - + The start point of this line Punkt początkowy tej linii - + The end point of this line Punkt końcowy tej linii - + The length of this line Długość tej linii - + Create a face if this object is closed Utwórz ścianę jeśli ten obiekt jest zamknięty - + The number of subdivisions of each edge Liczba podziałów każdej krawędzi - + Number of faces Liczba płaszczyzn - + Radius of the control circle Promień kontrolnego okręgu - + How the polygon must be drawn from the control circle Jak należy narysować wielokąt z okręgu kontrolnego - + Projection direction Kierunek projekcji - + The width of the lines inside this object Grubość linii wewnątrz tego obiektu - + The size of the texts inside this object Rozmiar tekstów wewnątrz tego obiektu - + The spacing between lines of text Odstęp między wierszami tekstu - + The color of the projected objects Kolor rzutowanych obiektów - + The linked object Obiekt połączony - + Shape Fill Style Styl wypełnienia kształtu - + Line Style Styl linii - + If checked, source objects are displayed regardless of being visible in the 3D model Jeśli jest zaznaczone, obiekty źródłowe są wyświetlane niezależnie od tego, czy są widoczne w modelu 3D - + Create a face if this spline is closed Utwórz ścianę jeśli ta krzywa składana jest zamknięta - + Parameterization factor Współczynnik parametryzacji - + The points of the Bezier curve Punkty krzywej Bezier'a - + The degree of the Bezier function Stopień funkcja Beziera - + Continuity Ciągłość - + If the Bezier curve should be closed or not Jeśli krzywa Bezier'a powinna być zamknięta lub otwarta - + Create a face if this curve is closed Utwórz ścianę jeśli ta krzywa jest zamknięta - + The components of this block Składniki tego bloku - + The base object this 2D view must represent Obiekt bazowy musi reprezentować widok 2D - + The projection vector of this object Wektor rzutowania tego obiektu - + The way the viewed object must be projected Sposób rzutowania oglądanego obiektu - + The indices of the faces to be projected in Individual Faces mode Wskaźniki twarzy mają być wyświetlane w trybie pojedynczych twarzy - + Show hidden lines Pokaż ukryte linie - + The base object that must be duplicated Obiekt Bazowy, który musi zostać zduplikowany - + The type of array to create Typ tablicy do utworzenia - + The axis direction Kierunek osi - + Number of copies in X direction Liczba kopii w kierunku X - + Number of copies in Y direction Liczba kopii w kierunku Y - + Number of copies in Z direction Liczba kopii w kierunku Z - + Number of copies Liczba kopii - + Distance and orientation of intervals in X direction Dystans i orientacja interwałów w kierunku X - + Distance and orientation of intervals in Y direction Dystans i orientacja interwałów w kierunku Y - + Distance and orientation of intervals in Z direction Dystans i orientacja interwałów w kierunku Z - + Distance and orientation of intervals in Axis direction Dystans i orientacja interwałów w kierunku Axis - + Center point Punkt środkowy - + Angle to cover with copies Kąt do pokrycia kopiami - + Specifies if copies must be fused (slower) Określa, czy kopie muszą byś zabezpieczone (wolniej) - + The path object along which to distribute objects Obiekt ścieżki, wzdłuż którego można rozmieszczać obiekty - + Selected subobjects (edges) of PathObj Wybrane podobiekty (krawędzie) PathObj - + Optional translation vector Opcjonalny wektor przemieszczenia - + Orientation of Base along path Orientacja bazy wzdłuż ścieżki - + X Location Pozycja X - + Y Location Pozycja Y - + Z Location Pozycja Z - + Text string Tekst - + Font file name Nazwa pliku czcionki - + Height of text Wysokość tekstu - + Inter-character spacing Odstępy między znakami - + Linked faces Połączone ściany - + Specifies if splitter lines must be removed Określa, czy linie podziału muszą zostać usunięte - + An optional extrusion value to be applied to all faces Opcjonalna wartość wytłaczania, którą należy zastosować do wszystkich powierzchni - + Height of the rectangle Wysokość prostokąta - + Horizontal subdivisions of this rectangle Poziome podziały tego prostokątu - + Vertical subdivisions of this rectangle Pionowe podziały tego prostokątu - + The placement of this object Położenie tego obiektu - + The display length of this section plane Widoczna długość tej płaszczyzny przekroju - + The size of the arrows of this section plane Rozmiar strzałek na tej płaszczyźnie przekroju - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location W przypadku trybów Cutlines i Cutfaces pozostawia twarze w miejscu cięcia - + The base object is the wire, it's formed from 2 objects Obiektem podstawowym jest drut, utworzony z 2 obiektów - + The tool object is the wire, it's formed from 2 objects Narzędziem podstawowym jest drut, utworzony z 2 obiektów - + The length of the straight segment Długość segmentu prostej - + The point indicated by this label Punkt wskazany przez tę etykietę - + The points defining the label polyline Punkty definiujące polilinię etykiet - + The direction of the straight segment Kierunek prostego segmentu - + The type of information shown by this label Typ informacji pokazywanych przez tę etykietę - + The target object of this label Obiekt docelowy tej etykiety - + The text to display when type is set to custom Tekst do wyświetlenia, gdy typ jest ustawiony jako niestandardowy - + The text displayed by this label Tekst wyświetlany przez tę etykietę - + The size of the text Rozmiar tekstu - + The font of the text Font tego tekstu - + The size of the arrow Rozmiar strzałki - + The vertical alignment of the text Pionowe wyrównanie tekstu - + The type of arrow of this label Typ strzałki tej etykiety - + The type of frame around the text of this object Typ ramki wokół tekstu tego obiektu - + Text color Kolor tekstu - + The maximum number of characters on each line of the text box Maksymalna liczba znaków w każdym wierszu pola tekstowego - + The distance the dimension line is extended past the extension lines Odległość na jaką linia wymiarowa jest przedłużona poza linie przedłużenia - + Length of the extension line above the dimension line Długość linii pomocniczej powyżej linii wymiaru - + The points of the B-spline Punkty B-spline - + If the B-spline is closed or not Czy B-spline jest zamknięta - + Tessellate Ellipses and B-splines into line segments Te elipsy mozaikowe i B-splajny w segmenty liniowe - + Length of line segments if tessellating Ellipses or B-splines into line segments Długość segmentów liniowych w przypadku mozaikowania elips lub B-spline w segmenty liniowe - + If this is True, this object will be recomputed only if it is visible Jeśli to jest Prawda, obiekt ten zostanie przeliczony tylko wtedy, gdy będzie widoczny - + Base Baza - + PointList Lista punktów - + Count Przelicz - + The objects included in this clone Obiekty zawarte w tym klonie - + The scale factor of this clone Współczynnik skali tego klonu - + If this clones several objects, this specifies if the result is a fusion or a compound Jeśli klonuje kilka obiektów, określa to, czy wynikiem jest fuzja, czy związek - + This specifies if the shapes sew To określa, czy kształty szyją - + Display a leader line or not Wyświetl lub ukryj linie odniesienia - + The text displayed by this object Tekst wyświetlany przez ten obiekt - + Line spacing (relative to font size) Odstęp między wierszami (w stosunku do rozmiaru czcionki) - + The area of this object - The area of this object + Kształt tego obiektu - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Wyświetla symbol wymiaru na końcu łamanej - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Bezpieczna ściana i obiekty struktury tego samego typu i materiału + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Nachylenie - + Scale Skala - + Writing camera position Pozycja kamery pisania - + Writing objects shown/hidden state Pisanie obiektów pokazanych / ukrytych - + X factor Czynnik X - + Y factor Czynnik Y - + Z factor współczynnik Z - + Uniform scaling Jednolite skalowanie - + Working plane orientation Orientacja płaszczyzny roboczej @@ -780,20 +815,25 @@ from menu Tools -> Addon Manager Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> menedżer dodadków - + This Wire is already flat Ten Przewód jest już płaski - + Pick from/to points Wybierz z/do punktów - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Nachylenie dla wybranych przewodów / linii: 0 = poziomo, 1 = 45 stopni w górę, -1 = 45 stopni w dół + + + Create a clone + Utwórz klon + DraftShapeStringGui @@ -805,7 +845,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Text to be made into ShapeString - Text to be made into ShapeString + Tekst do przekształcenia w ciąg kształtów @@ -820,7 +860,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Height of the result - Height of the result + Wysokość wyniku @@ -845,28 +885,28 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Wprowadź współrzędne lub wybierz punkt za pomocą myszy. Reset 3d point selection - Reset 3d point selection + Zresetuj wybór punktu 3d Reset Point - Reset Point + Zresetuj punkt Draft_AddConstruction - + Add to Construction group Dodać do grupy budowlanej - + Adds the selected objects to the Construction group Dodawanie wybranych obiektów do grupy budowlanej @@ -874,12 +914,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_AddPoint - + Add Point Dodaj punkt - + Adds a point to an existing Wire or B-spline Dodaje punkt do bieżącego szkieletu lub B-spline @@ -887,12 +927,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_AddToGroup - + Move to group... Przenieś do grupy... - + Moves the selected object(s) to an existing group Przenieś wybrane obiekt(-y) do bieżącej grupy @@ -900,12 +940,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_ApplyStyle - + Apply Current Style Zastosuj Bieżący styl - + Applies current line width and color to selected objects Stosuje bieżącą szerokość linii i kolorów do zaznaczonych obiektów @@ -913,46 +953,46 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_Arc - + Arc Łuk - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Tworzy łuk według punktu środkowego i promienia. CTRL, aby przyciągnąć, SHIFT, aby ograniczyć Draft_ArcTools - + Arc tools - Arc tools + Narzędzia łuku Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Łuk przez 3 punkty - + Creates an arc by 3 points - Creates an arc by 3 points + Tworzy łuk przez 3 punkty Draft_Array - + Array Tablica - + Creates a polar or rectangular array from a selected object Tworzy biegunową lub prostokątną tablicę z zaznaczonego obiektu @@ -960,12 +1000,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_AutoGroup - + AutoGroup Autogrupowanie - + Select a group to automatically add all Draft & Arch objects to Wybierz grupę, aby automatycznie dodać wszystkie obiekty Draft i Arch do @@ -973,12 +1013,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Tworzy wielopunktowe B-spline. CTRL aby przyciągnąć, SHIFT aby ograniczyć @@ -986,12 +1026,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_BezCurve - + BezCurve Krzywa Beziera - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Tworzy krzywą Beziera. Klawisz CTRL aby przyciągnąć, SHIFT aby ograniczyć @@ -999,20 +1039,20 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_BezierTools - + Bezier tools - Bezier tools + Narzędzia Beziera Draft_Circle - + Circle Okrąg - + Creates a circle. CTRL to snap, ALT to select tangent objects Tworzy okrąg. CTRL przyciągaj, ALT wybierz styczną obiektu @@ -1020,12 +1060,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_Clone - + Clone Klon - + Clones the selected object(s) Klonuje wskazany obiekt(y) @@ -1033,12 +1073,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_CloseLine - + Close Line Zamknij Linię - + Closes the line being drawn Zamyka rysowaną linię @@ -1046,27 +1086,27 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + PrzestrzenieBezKrzywych - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Tworzy krzywą sześcienną Beziera +Kliknij i przeciągnij, aby zdefiniować punkty kontrolne. CTRL, aby przyciągnąć, SHIFT, aby ograniczyć Draft_DelPoint - + Remove Point Usuń punkt - + Removes a point from an existing Wire or B-spline Usuwa punktu z bieżącego szkieletu lub B-spline @@ -1074,12 +1114,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Wymiar - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Tworzy wymiar. CTRL przyciągaj, SHIFT, aby ograniczyć, ALT, aby zaznaczyć segment @@ -1087,12 +1127,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Zainstalowanie starszej wersji - + Explodes the selected objects into simpler objects, or subtracts faces Rozbicie wybranych obiektów na prostsze obiekty, lub odjęcie płaszczyzn @@ -1100,12 +1140,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Projekt do szkicu - + Convert bidirectionally between Draft and Sketch objects Konwersja dwukierunkowa pomiędzy obiektami Draft i Sketch @@ -1113,12 +1153,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Rysunek - + Puts the selected objects on a Drawing sheet Umieszcza wybrane obiekty na arkuszu rysunku @@ -1126,12 +1166,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Edytuj - + Edits the active object Modyfikuje aktywny obiekt @@ -1139,30 +1179,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Edytuj ulepszenia - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Edytuj zaznaczone obiekty Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Tworzy elipsę. CTRL żeby włączyć przyciąganie @@ -1170,12 +1205,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Grupa powierzchni - + Creates a facebinder object from selected face(s) Tworzy obiekt grupę powierzchni z zaznaczonej(-nych) powierzchni @@ -1183,12 +1218,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Zakończenie linii - + Finishes a line without closing it Zakończenie linii bez zamykania @@ -1196,12 +1231,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Odwróć przestrznie - + Flip the normal direction of a dimension odwróć normalny wymiar przestrzeni @@ -1209,12 +1244,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Ulecz - + Heal faulty Draft objects saved from an earlier FreeCAD version Naprawia błędnie zapisane obiekty Szkicu z wcześniejszych wersji FreeCAD @@ -1222,38 +1257,51 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Połącz - + Joins two wires together - Joins two wires together + Łączy dwa przewody razem Draft_Label - + Label Etykieta - + Creates a label, optionally attached to a selected object or element Tworzy etykietę, opcjonalnie dołączoną do wybranego obiektu lub elementu + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linia - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Tworzy 2-punktowe line. CTRL przyciągaj, SHIFT ogranicz @@ -1261,12 +1309,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Odbicie lustrzane - + Mirrors the selected objects along a line defined by two points Odbicie szkicu @@ -1274,25 +1322,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Przesuń - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Przenosi wybrane obiekty między 2 punktami. CTRL, aby przyciągnąć, SHIFT, aby ograniczyć Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Offset aktywnego obiektu. CTRL przyciągnij, SHIFT, ogranicz, ALT, kopiuj @@ -1300,12 +1348,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray ŚcieżkaSzyku - + Creates copies of a selected object along a selected path. Utwórz kopię wybranego obiektu względem zdefiniowanej ścieżki @@ -1313,12 +1361,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punkt - + Creates a point object Tworzy obiekt punktowy @@ -1326,12 +1374,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Tablica Punktów - + Creates copies of a selected object on the position of points. Tworzy w miejscu punktów kopie wybranych obiektów. @@ -1339,12 +1387,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Wielokąt - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Tworzy regularny wielobok. CTRL przyciągaj, SHIFT ogranicz @@ -1352,12 +1400,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Prostokąt - + Creates a 2-point rectangle. CTRL to snap Tworzy prostokąt względem 2 punktów. CTRL przyciągnij @@ -1365,12 +1413,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Obróć - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Obraca wybrane obiekty. CTRL przyciągaj, SHIFT, ogranicz, ALT tworzy kopię @@ -1378,12 +1426,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skaluje zaznaczone obiekty z punktu bazowego. CTRL przyciąganie, SHIFT, aby ograniczyć, ALT, aby skopiować @@ -1391,12 +1439,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Zaznacz grupę... - + Selects all objects with the same parents as this group Zaznacza wszystkie obiekty w danej grupie od tych samych rodziców @@ -1404,12 +1452,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Wybierz płaszczyznę - + Select a working plane for geometry creation Wybierz płaszczyznę roboczą do tworzenia geometrii @@ -1417,12 +1465,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Tworzy obiekt proxy z aktualnej płaszczyzny roboczej - + Create Working Plane Proxy Tworzenie powierzchni roboczej Proxy @@ -1430,12 +1478,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Widok 2D kształtu - + Creates Shape 2D views of selected objects Tworzy kształt 2D z widoków zaznaczonych obiektów @@ -1443,12 +1491,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Kształt z tekstu... - + Creates text string in shapes. Utwórz tekst po krzywiźnie. @@ -1456,12 +1504,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Pokaż belkę przyciągania - + Shows Draft snap toolbar Pokazuje przyciąganie do paska narzędzi w module Szkic @@ -1469,12 +1517,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Ustaw nachylenie - + Sets the slope of a selected Line or Wire Ustawia nachylenie wybranej linii lub szkieletu @@ -1482,12 +1530,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Kąty - + Snaps to 45 and 90 degrees points on arcs and circles Przyciągaj do punktów 45-tego i 90-tego stopnia na łukach i okręgach @@ -1495,12 +1543,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Środek - + Snaps to center of circles and arcs Przyciągaj do środka łuków i okręgów @@ -1508,12 +1556,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Wymiary - + Shows temporary dimensions when snapping to Arch objects Pokazuj chwilowe wymiary podczas przyciągania do łuków @@ -1521,12 +1569,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punkt końcowy - + Snaps to endpoints of edges Przyciągaj do punktów końcowych krawędzi @@ -1534,12 +1582,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Rozszerzenie - + Snaps to extension of edges Przyciągaj do rozszerzenia krawędzi @@ -1547,12 +1595,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Siatka - + Snaps to grid points Przyciągaj do punktów sieci @@ -1560,12 +1608,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Przecięcie - + Snaps to edges intersections Przyciągaj do miejsc przecięcia krawędzi @@ -1573,17 +1621,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Przełączanie Włącz/Wyłącz - + Activates/deactivates all snap tools at once Włącza/Wyłącza wszystkie narzędzia przyciągania - + Lock Blokada @@ -1591,12 +1639,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punkt środkowy - + Snaps to midpoints of edges Przyciągnij do punktów środkowych krawędzi @@ -1604,12 +1652,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Najbliższy - + Snaps to nearest point on edges Przyciągnij do najbliższego punktu krawędzi @@ -1617,12 +1665,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orto - + Snaps to orthogonal and 45 degrees directions Przyciągnij do pozycji ortogonalnej i kierunku 45 stopni @@ -1630,12 +1678,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Równolegle - + Snaps to parallel directions of edges Przyciągnij równolegle do kierunku krawędzi @@ -1643,12 +1691,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Prostopadle - + Snaps to perpendicular points on edges Przyciągnij prostopadle do punktu na krawędzi @@ -1656,12 +1704,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Specjalne - + Snaps to special locations of objects Przyciąga do specjalnych lokalizacji obiektów @@ -1669,12 +1717,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Płaszczyzna robocza - + Restricts the snapped point to the current working plane Przypisz przyciągany punkt do bieżącej płaszczyzny roboczej @@ -1682,25 +1730,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Rozdziel - + Splits a wire into two wires - Splits a wire into two wires + Dzieli przewód na dwa przewody Draft_Stretch - + Stretch Rozciągnij - + Stretches the selected objects Rozciąga wybrane obiekty @@ -1708,12 +1756,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Tworzy adnotacje. CTRL przyciągnij @@ -1721,12 +1769,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Przełącza tryb budowy dla kolejnych obiektów. - + Toggle Construction Mode Przełącz do trybu budowy @@ -1734,12 +1782,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Przełącz w tryb ciągły - + Toggles the Continue Mode for next commands. Przełącza tryb Kontynuuj dla następnego polecenia. @@ -1747,12 +1795,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Przełącz tryb wyświetlania - + Swaps display mode of selected objects between wireframe and flatlines Zamiana trybu wyświetlania wybranych obiektów pomiędzy modelem siatkowym i liniowym @@ -1760,22 +1808,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Przełącz siatki - + Toggles the Draft grid on/off Włącza/wyłącza siatkę Draft - + Grid Siatka - + Toggles the Draft grid On/Off Włącza/wyłącza siatkę szkicu @@ -1783,12 +1831,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Przytnij/Rozciągnij - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Przycina lub rozszerza zaznaczony obiekt, lub wytłacza pojedyncze powierzchnie. CTRL skokowo, SHIFT ogranicza do aktualnego segmentu lub do prostopadłej, ALT odwraca @@ -1796,12 +1844,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Cofnij ostatni segment - + Undoes the last drawn segment of the line being drawn Cofa ostatni segment rysowanej linii @@ -1809,51 +1857,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Aktualizuj - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Łączy wybrane obiekty w jeden lub konwertuje zamknięte przewody na wypełnione twarze lub jednoczy twarze - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Dodaje VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Tworzy wielokrotne punty DraftWire (DWire). Naciśnięcie klawisza CTRL spowoduje przyciąganie, naciśnięcie klawisza SHIFT to ogranicza + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Połącz z B-splajnem - + Converts between Wire and B-spline Konwertuje pomiędzy Wire a B-spline @@ -1861,22 +1896,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Ogólne ustawienia rysunkowe - + This is the default color for objects being drawn while in construction mode. Jest to domyślny kolor dla obiektów, które są sporządzone w trybie budowy. - + This is the default group name for construction geometry Jest to domyślna nazwa grupy dla geometrii konstrukcji - + Construction Konstrukcja @@ -1886,37 +1921,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainZapisz bieżący kolor i szerokość linii całej sesji - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Jeśli włączone, tryb kopiowania jest aktywny w czasie komendy. Domyślnie tryb kopiowania jest wyłączony. - + Global copy mode Tryb globalny kopiowania - + Default working plane Domyślna płaszczyzna robocza - + None Żaden - + XY (Top) XY (góra) - + XZ (Front) XZ (przód) - + YZ (Side) YZ (strona) @@ -1984,12 +2019,12 @@ such as "Arial:Bold" Ustawienia ogólne - + Construction group name Nazwa grupy Konstrukcja - + Tolerance Tolerancja @@ -2014,22 +2049,22 @@ such as "Arial:Bold" Podaj folder zawierający pliki SVG definicji wzorów wypełnienia ,które można dodać do standardowego modułu wypełnień Draft. - + Draft interface mode Tryb Draft - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction To jest tryb UI, w którym moduł Draft będzie działać następująco: Pasek narzędzi umieści wszystkie ustawienia Draft w osobnym pasku, natomiast tryb paska zadań użyje system FreeCAD Taskview dla wszystkich jego interakcji z użytkownikiem - + Toolbar Pasek narzędzi - + Taskview Pasek zadań @@ -2059,12 +2094,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Po wklejeniu skopiowanych obiektów zaznaczone są kopie. Ta opcja powoduje, że zaznaczone pozostają obiekty bazowe. - + Select base objects after copying Zaznacz obiekty bazowe po skopiowaniu @@ -2099,7 +2134,7 @@ such as "Arial:Bold" Linia główna będzie grubsza. Określ, ile kwadratów między liniami głównymi. - + Internal precision level Wewnętrzny poziom precyzji @@ -2214,12 +2249,12 @@ such as "Arial:Bold" Zamień kolor linii z białego na czarny - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Gdy to pole jest zaznaczone, narzędzia projektu stworzą część pierwotną zamiast obiektów, jeśli będą dostępne. - + Use Part Primitives when available Używaj Prymitywów Części, gdy dostępne @@ -2239,12 +2274,7 @@ such as "Arial:Bold" Zawsze przyciągaj (deaktywuje tryb przyciągania) - - Construction geometry - Geometria konstrukcji - - - + Construction geometry color Kolor geometrii konstrukcji @@ -2384,7 +2414,7 @@ such as "Arial:Bold" Wybierz plik czcionki - + Fill objects with faces whenever possible Wypełnij obiekt powierzchniami, gdy tylko możliwe @@ -2674,7 +2704,7 @@ such as "Arial:Bold" Automatyczna aktualizacja (tylko bazowy importer) - + Prefix labels of Clones with: Prefiksy etykiet klonów za pomocą: @@ -2713,7 +2743,7 @@ Np.: w przypadku plików w milimetrach: 1, w centymetrach: 10, w metrach: 1000, Jest to metoda wybrana do importowania koloru obiektu SVG do FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Jeśli ta opcja jest zaznaczona, obiekty pojawią się jako wypełnione domyślnie. W przeciwnym razie pojawią się one jako szkielet @@ -2793,17 +2823,7 @@ Np.: w przypadku plików w milimetrach: 1, w centymetrach: 10, w metrach: 1000, Jeśli ta opcja jest włączona, obiekty z tych samych warstw zostaną połączone w bloki próbne, co spowoduje szybsze wyświetlanie, ale spowoduje, że będą one mniej łatwe do edycji - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate Podczas rysowania linii ustaw ostrość na długość zamiast współrzędnej X @@ -2845,22 +2865,22 @@ Np.: w przypadku plików w milimetrach: 1, w centymetrach: 10, w metrach: 1000, Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) - Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) + Zaznacz to, jeśli chcesz zachować kolory ściany podczas wykonywania obniżania i podnoszenia (tylko przy dzieleniu ściany i tworzeniu powłoki) Preserve colors of faces during downgrade/upgrade - Preserve colors of faces during downgrade/upgrade + Zachowaj kolory powierzchni podczas obniżania / podnoszenia Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) - Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) + Zaznacz to pole, jeśli chcesz, aby nazwy powierzchni pochodziły od nazwy obiektu źródłowego i podobnie podczas wykonywania obniżania i podnoszenia (tylko przy dzieleniu ściany i tworzeniu powłoki) Preserve names of faces during downgrade/upgrade - Preserve names of faces during downgrade/upgrade + Zachowaj kolory powierzchni podczas obniżania / podnoszenia @@ -2875,7 +2895,7 @@ Np.: w przypadku plików w milimetrach: 1, w centymetrach: 10, w metrach: 1000, Ellipse export is poorly supported. Use this to export them as polylines instead. - Ellipse export is poorly supported. Use this to export them as polylines instead. + Eksport elipsy jest źle obsługiwany. Użyj tego aby eksportować je jako polilinie zamiast tego. @@ -2883,709 +2903,856 @@ Np.: w przypadku plików w milimetrach: 1, w centymetrach: 10, w metrach: 1000, Maksymalny segment splajnu: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Liczba miejsc po przecinku we współrzędnych wewnętrznych (np. 3 = 0,001). Wartości pomiędzy 6 a 8 są zwykle uważane za najlepszy kompromis wśród użytkowników FreeCADa. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Jest to wartość używana przez funkcje, które używają tolerancji. Wartości z różnicami poniżej tej wartości będą traktowane tak samo. Ta wartość będzie wkrótce przestarzała, więc powyższy poziom dokładności kontroluje oba. Use legacy python exporter - Use legacy python exporter + Użyj starszego eksportera pytona + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria Konstrukcji + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Względny + + + + R + R + + + + Continue + Kontynuuj + + + + T + T + + + + Close + Zamknij + + + + O + O + + + + Copy + Kopiuj + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Wypełnij + + + + L + L + + + + Exit + Wyjdź + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Długość + + + + H + H + + + + Wipe + Wyczyść + + + + W + W + + + + Set WP + Ustaw WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Ogranicz X + + + + X + X + + + + Restrict Y + Ogranicz Y + + + + Y + Y + + + + Restrict Z + Ogranicz Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Przyciągnij projekt - - - Draft creation tools - Narzędzia tworzenia projektu - - - - Draft modification tools - Narzędzia modyfikacji projektu - - - - Utilities - Narzędzia - - - - Wire tools - Narzędzia Szkieletu - - - - Snapping - Przyciąganie - draft - + not shape found nie znaleziono kształtu - + All Shapes must be co-planar Wszystkie kształty muszą być współpłaszczyznowe - + The given object is not planar and cannot be converted into a sketch. Podany obiekt nie jest planarny i nie może być konwertowany na szkic. - + Unable to guess the normal direction of this object Nie można odgadnąć normalnego kierunku tego obiektu - + Draft Command Bar Pasek komend projektu - + Toggle construction mode Przełącz tryb budowlany - + Current line color Obecny kolor linii - + Current face color Obrecny kolor twarzy - + Current line width Obecna szerokość linii - + Current font size Obecny rozmiar czcionki - + Apply to selected objects Zastosuj do wybranych obiektów - + Autogroup off Wyłącz Autogrupowanie - + active command: aktywne polecenie: - + None Żaden - + Active Draft command Aktywne polecenie kreślarskie - + X coordinate of next point Współrzędna X następnego punktu - + X X - + Y Y - + Z Z - + Y coordinate of next point Współrzędna Y następnego punktu - + Z coordinate of next point Współrzędna Z następnego punktu - + Enter point Wprowadź punkt - + Enter a new point with the given coordinates Wprowadź nowy punkt z koordynatami - + Length Długość - + Angle Kąt - + Length of current segment Długość odcinka bieżącego - + Angle of current segment Kąt bieżącego segmentu - + Radius Promień - + Radius of Circle Promień okręgu - + If checked, command will not finish until you press the command button again Jeżeli opcja jest zaznaczona, polecenie nie zostanie zakończone do momentu naciśnięcia przycisku polecenia ponownie - + If checked, an OCC-style offset will be performed instead of the classic offset Jeśli zaznaczone, będzie wykonywane przesunięcie w stylu OCC zamiast classic - + &OCC-style offset &OCC-styl przesunięcie - + Add points to the current object Dodaj punkty do aktywnego obiektu - + Remove points from the current object Usuń punkty z aktywnego obiektu - + Make Bezier node sharp Zrób węzeł krzywej Beziera ostrym - + Make Bezier node tangent Zrób węzeł krzywej Beziera styczny - + Make Bezier node symmetric Zrób węzeł krzywej Beziera symetryczny - + Sides Boki - + Number of sides Liczba boków - + Offset Offset - + XY (top) XY (góra) - - Select XY plane - Wybierz płaszczyznę XY - - - + XZ (front) XZ (przód) - - Select XZ plane - Wybierz płaszczyznę XZ - - - + YZ (side) YZ (bok) - - Select YZ plane - Wybierz płaszczyznę YZ - - - + View Widok - - Select plane perpendicular to the current view - Wybierz płaszczyznę prostopadłą do aktualnego widoku - - - + Auto Automatyczny - - Do not project points to a drawing plane - Nie rzutuj punktów na płaszczyznę rysunku - - - + Text string to draw Krzywe tekstu do rysowania - + String Ciąg - + Height of text Wysokość tekstu - + Height Wysokość - + Intercharacter spacing Odstęp pomiędzy znakami - + Tracking Śledzenie - + Full path to font file: Pełna ścieżka do pliku czcionki: - + Open a FileChooser for font file Otwórz okno wyboru pliku dla czcionki - + Grid spacing Odstępy siatki - + The spacing between the grid lines Odległość między liniami siatki - + Main line every Główna linia co - + The number of lines between main lines Liczba linii między głównymi liniami - + Center plane on view Wyśrodkuj płaszczyznę na widoku - - Select Plane - Wybierz Płaszczyznę - - - + Line Linia - + DWire DWire - + Circle Okrąg - + Center X Środek X - + Arc Łuk - + Point Punkt - + Label Etykieta - + Distance Odległość - + Trim Ucinanie - + Pick Object Wybierz obiekt - + Edit Edytuj - + Global X Globalna X - + Global Y Globalna Y - + Global Z Globalna Z - + Local X Lokalna X - + Local Y Lokalna Y - + Local Z Lokalna Z - + Invalid Size value. Using 200.0. Nieprawidłowa wartość rozmiaru. Użyj 200.0. - + Invalid Tracking value. Using 0. Nieprawidłowa wartość śledzenia. Użyj 0. - + Please enter a text string. Wprowadź tekst. - + Select a Font file Wybierz plik czcionki - + Please enter a font file. Wprowadź plik czcionki. - + Autogroup: Autogrupowanie: - + Faces Ściany - + Remove Usuń - + Add Dodaj - + Facebinder elements Elementy facebindera - + Create Line Utwórz linię - - Pick next point: - - Wybierz następny punkt - - - + Convert to Wire Konwersja do szkieletu - + BSpline BSpline - + BezCurve Krzywa Beziera - + Create BezCurve Stwórz krzywą Beziera - + Rectangle Prostokąt - + Create Plane Utwórz płaszczyznę - + Create Rectangle Utwórz Prostokąt - + Create Circle Utwórz Okrąg - + Create Arc Utwórz Łuk - + Start Angle Kąt początkowy - + Aperture Celownik - + Polygon Wielokąt - + Create Polygon Utwórz Wielokąt - + Ellipse Elipsa - + Create Ellipse Utwórz elipsę - + Text Tekst - + Create Text Utwórz Tekst - + Dimension Wymiar - + Create Dimension Utwórz Wymiarowanie - + ShapeString Forma teksowa - + Create ShapeString Stwórz formę tekstową - + Copy Kopiuj - + Move Przesuń - + Change Style Zmiana Stylu - + Rotate Obróć - - Cannot offset this object type - - Nie można odsunąć obiektu tego typu - - - + Stretch Rozciągnij - + Upgrade Aktualizuj - + Downgrade Zainstalowanie starszej wersji - + Selection is not a Knot Zaznaczenie nie jest Węzłem - + Convert to Sketch Konwertuj do Szkicu - + Convert to Draft Konwersja do Draft - + Convert Konwertuj - + Array Tablica - + Create Point Stwórz punkt - + Mirror Odbicie lustrzane - + &Draft Rysunek @@ -3608,179 +3775,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer żeby pozwolić FreeCAD na pobranie bibliotek, odpowiedz tak. - + Draft.makeBSpline: not enough points Draft.makeBSpline: niewystarczająca ilość punktów - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Równe punkty końcowe, wymuszono Zamknięcie - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Nieprawidłowa lista punktów - + No object given Nie podano obiektu - + The two points are coincident Dwa punkty są zbieżne - + Found groups: closing each open object inside Znalezione grupy: zamknięcie każdego otwartego obiektu wewnątrz - + Found mesh(es): turning into Part shapes Znaleziono siatkę(-ki): zamieniam w kształty Części - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Znaleziono 2 obiekty: łączenie ich - + Found several objects: creating a shell Znaleziono kilka obiektów: tworzenie powłoki - + Found several coplanar objects or faces: creating one face Znaleziono kilka obiektów współpłaszczyznowych lub powierzchń: tworzenie jednej powierzchni - + Found 1 non-parametric objects: draftifying it Znaleziono 1 nieparametryczny obiekt: formułowanie go - + Found 1 closed sketch object: creating a face from it Znaleziono 1 zamknięty obiekt rysunku: tworzenie z niego powierzchni - + Found 1 linear object: converting to line Znaleziono 1 obiekt liniowy: konwersja do linii - + Found closed wires: creating faces Znaleziono zamknięte przewody: tworzenie powierzchni - + Found 1 open wire: closing it Znaleziono 1 otwarty przewód: zamykanie go - + Found several open wires: joining them Znaleziono kilka otwartych przewodów: łączenie ich - + Found several edges: wiring them Znaleziono kilka krawędzi: łączenie ich - + Found several non-treatable objects: creating compound Znaleziono kilka nieprzypisanych obiektów: tworzenie kształtu złożonego - + Unable to upgrade these objects. Nie można uaktualnić tych obiektów. - + Found 1 block: exploding it Znaleziono 1 blok: rozbijanie go - + Found 1 multi-solids compound: exploding it Znaleziono 1 wielocząsteczkowy kształt złożony: rozbijanie go - + Found 1 parametric object: breaking its dependencies Znaleziono 1 obiekt parametryczny: łamanie jego zależności - + Found 2 objects: subtracting them Znaleziono 2 obiekty: odejmowanie ich - + Found several faces: splitting them Znaleziono kilka powierzchni: dzielenie ich - + Found several objects: subtracting them from the first one Znaleziono kilka obiektów: odejmowanie ich od pierwszego - + Found 1 face: extracting its wires Znaleziono 1 powierzchnię: wyodrębnianie jej przewodów - + Found only wires: extracting their edges Znaleziono tylko przewody: wyodrębnianie ich krawędzi - + No more downgrade possible Większe nachylenie nie jest możliwe - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Zamknięte tym samym pierwszym/końcowym Punktem. Geometria nie została zaktualizowana. - + No point found Nie znaleziono punktu - + ShapeString: string has no wires ShapeString: ciąg nie ma przewodów - + Relative Względny - + Continue Kontynuuj - + Close Zamknij @@ -3825,7 +3992,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Ogranicz Z - + Select edge Wybierz krawędź @@ -3840,7 +4007,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Tryb długości - + Wipe Wyczyść @@ -3855,454 +4022,279 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cycle snap object - + Check this to lock the current angle Zaznacz to, aby zablokować bieżący kąt - + Coordinates relative to last point or absolute Współrzędne w stosunku do ostatniego punktu lub bezwzględne - + Filled Wypełniony - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Zaznacz to, jeśli obiekt powinien się pojawić wypełniony, w przeciwnym razie pojawi się jego szkielet - - - + Finish Zakończ - + Finishes the current drawing or editing operation Kończy aktualny rysunek lub operację edycji - + &Undo (CTRL+Z) &Cofnij (CTRL+Z) - + Undo the last segment Cofnij ostatni segment - + Finishes and closes the current line Kończy i zamyka bieżący wiersz - + Wipes the existing segments of this line and starts again from the last point Czyści istniejące segmenty tego wierszu i rozpoczyna ponownie od ostatniego punktu - + Set WP Ustaw WP - + Reorients the working plane on the last segment Zmienia orientację płaszczyzny roboczej na ostatnim segmencie - + Selects an existing edge to be measured by this dimension Wybiera istniejącą krawędź w celu pomiaru przez ten wymiar - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - opcje - - - + Default Domyślne - + Pick a face to define the drawing plane Wybierz powierzchnię, aby zdefiniować płaszczyznę rysunku - - First point: - Pierwszy punkt: - - - - Closing - Zamykanie - - - + Create Wire Create Wire - - Removing last point - Usuwanie ostatniego punktu - - - - Next point: - Następny punkt: - - - - Restarting from - Uruchamianie ponowne z - - - + Unable to create a Wire from selected objects Nie można utworzyć szkieletu z zaznaczonych obiektów - + Spline has been closed Wątek został zamknięty - + Last point has been removed Ostatni punkt został usunięty - - Pick next point, or Finish (shift-F) or close (o): - Wybierz następny punkt, zakończ (shift-F) lub zamknij (o): - - - + Create B-spline Utwórz B-spline - + Bezier curve has been closed Krzywa Beziera została zamknięta - - Pick first point: - Wybierz punkt początkowy: - - - - Pick opposite point: - Wybierz przeciwległy punkt: - - - - Pick center point: - Wybierz punkt środkowy: - - - - Pick radius: - Wybierz promień: - - - - Pick start angle: - Wybierz kąt początkowy: - - - - Pick aperture: - Wybierz celownik: - - - - Aperture angle: - Kąt celownika: - - - - Pick location point: - Wybierz lokalizację punktu: - - - + Edges don't intersect! Krawędzie nie przecinają się! - + Pick ShapeString location point: Wybierz punkt lokalizacji ShapeString: - + Select an object to move Zaznacz obiekt do przeniesienia - - Pick start point: - Wybierz punkt początkowy: - - - - Pick end point: - Wybierz punkt końcowy: - - - + Select an object to rotate Zaznacz obiekt do obrócenia - - Pick rotation center: - Wybierz środek obrotu: - - - - Pick base angle: - Wybierz kąt bazowy: - - - - Pick rotation angle: - Wybierz kąt obrotu: - - - + Select an object to offset Wybierz obiekt do przesunięcia - + Offset only works on one object at a time Przesunięcie działa tylko na jeden obiekt w czasie - + Sorry, offset of Bezier curves is currently still not supported Przepraszamy, przesunięcie krzywych Beziera na chwilę obecną nie jest obsługiwane - - Pick distance: - Wybierz odległość: - - - + Select an object to stretch Zaznacz obiekt do rozciągnięcia - - Pick first point of selection rectangle: - Wybierz pierwszy punkt zaznaczenia prostokątnego: - - - - Pick opposite point of selection rectangle: - Wybierz przeciwległy punkt zaznaczenia prostokątnego: - - - - Pick start point of displacement: - Wybierz początkowy punkt przemieszczenia: - - - - Pick end point of displacement: - Wybierz końcowy punkt przemieszczenia: - - - + Turning one Rectangle into a Wire Przekształcanie jednego Prostokąta w Szkielet - + Select an object to join Wybierz obiekt do połączenia - + Join Połącz - + Select an object to split Wybierz obiekt do podzielenia - + Select an object to upgrade Zaznacz obiekt do uaktualnienia - + Select object(s) to trim/extend Wybierz obiekt(y) do przycięcia/rozszerzenia - + Unable to trim these objects, only Draft wires and arcs are supported Niemożliwym jest przycięcie tych obiektów, tylko łuki i linie Rysunku są obsługiwane - + Unable to trim these objects, too many wires Niemożliwym jest przycięcie tych obiektów, za dużo linii - + These objects don't intersect Te obiekty się nie przecinają - + Too many intersection points Zbyt wiele punktów przecięcia - + Select an object to scale Wybierz obiekt do skalowania - - Pick base point: - Wybierz punkt bazowy: - - - - Pick reference distance from base point: - Wybierz odległość odniesienia od punktu bazowego: - - - - Pick new distance from base point: - Wybierz nową odległość od punktu bazowego: - - - + Select an object to project Wybierz obiekt do projektowania - - This object type is not editable - Ten typ obiektu nie jest edytowalny - - - + Please select only one object Proszę zaznaczyć tylko jeden obiekt - + Select a Draft object to edit Wybierz obiekt szkicu do edycji - + Active object must have more than two points/nodes Aktywny obiekt musi mieć więcej niż dwa punkty/węzły - + Endpoint of BezCurve can't be smoothed Punkt końcowy krzywej Beziera nie może być wygładzony - + Select an object to convert Zaznacz obiekt, aby przekonwertować - + Select an object to array Wybierz obiekt do stworzenia szyku - + Please select base and path objects Proszę wybrać podstawę i ścieżkę obiektu - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Wybierz obiekt do klonowania - + Select face(s) on existing object(s) Wybierz powierzchnię(e) na istniejącym(ch) obiekcie(ach) - + Select an object to mirror Wybierz obiekt do stworzenia kopii danych - - Pick start point of mirror line: - Wybierz punkt startowy linii odbicia: - - - - Pick end point of mirror line: - Wybierz punkt końcowy linii odbicia: - - - + This tool only works with Wires and Lines To narzędzie działa tylko z Przewodami i Liniami - - - Pick target point: - Wybierz punkt docelowy: - - - - Pick endpoint of leader line: - Wybierz punkt końcowy linii odniesienia: - - - - Pick text position: - Wybierz pozycję tekstu: - ODA (formerly Teigha) File Converter not found, DWG support is disabled Nie znaleziono ODA (dawniej Teigha) File Converter, obsługa DWG jest wyłączona - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4312,56 +4304,354 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve - CubicBezCurve + PrzestrzenieBezKrzywych - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Niektóre pliki nie mogą być przeniesione. - + Scale Skala - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Góra + + + + Front + Przód + + + + Side + Strona + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatyczna + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Obrót + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Wybierz obiekt do edycji + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Szkic + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Narzędzia + + + + Wire tools + Narzędzia Szkieletu + + + + Snapping + Przyciąganie + diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 0361b3bb55..2dab35a557 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 23212f4e02..b06d4d640c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Define um padrão de hachura - + Sets the size of the pattern Define o tamanho do padrão - + Startpoint of dimension Ponto de partida da dimensão - + Endpoint of dimension Ponto de término da dimensão - + Point through which the dimension line passes Ponto pelo qual a linha de dimensão passa - + The object measured by this dimension O objeto medido por esta dimensão - + The geometry this dimension is linked to A geometria que esta dimensão se relaciona - + The measurement of this dimension A medida desta dimensão - + For arc/circle measurements, false = radius, true = diameter Para medidas de arco/círculo, falso = raio, verdadeiro = diâmetro - + Font size Tamanho da fonte - + The number of decimals to show O número de decimais a mostrar - + Arrow size Tamanho do ponteiro - + The spacing between the text and the dimension line O espaçamento entre o texto e a linha de dimensão - + Arrow type Tipo de ponteiro - + Font name Nome da fonte - + Line width Espessura de linha - + Line color Cor da linha - + Length of the extension lines Comprimento das linhas de extensão - + Rotate the dimension arrows 180 degrees Rotacione os ponteiros de dimensão a 180 graus - + Rotate the dimension text 180 degrees Rotacione o texto de dimensão a 180 graus - + Show the unit suffix Mostrar o sufixo de unidade - + The position of the text. Leave (0,0,0) for automatic position A posição do texto. Deixe (0, 0,0) para posição automática - + Text override. Use $dim to insert the dimension length Substituição de texto. Use $dim para inserir o comprimento da dimensão - + A unit to express the measurement. Leave blank for system default Uma unidade para expressar a medida. Deixe em branco para padrão do sistema - + Start angle of the dimension Ângulo de início da dimensão - + End angle of the dimension Ângulo de fim da dimensão - + The center point of this dimension O ponto central desta dimensão - + The normal direction of this dimension A direção normal desta dimensão - + Text override. Use 'dim' to insert the dimension length Substituição de texto. Use 'dim' para inserir o comprimento da dimensão - + Length of the rectangle Largura do retângulo - + Radius to use to fillet the corners Use o raio para fatiar os cantos - + Size of the chamfer to give to the corners Tamanho do chanfro nos cantos - + Create a face Criar um rosto - + Defines a texture image (overrides hatch patterns) Define uma imagem de textura (Substitui os padrões de hachura) - + Start angle of the arc Ângulo inicial do arco - + End angle of the arc (for a full circle, give it same value as First Angle) Ângulo final do arco (para um círculo completo, use o mesmo valor do ângulo inicial) - + Radius of the circle Raio do círculo - + The minor radius of the ellipse O raio menor da elipse - + The major radius of the ellipse O raio maior da elipse - + The vertices of the wire Os vértices do arame - + If the wire is closed or not Se o arame está fechado ou não - + The start point of this line O ponto de partida desta linha - + The end point of this line O ponto final desta linha - + The length of this line O comprimento desta linha - + Create a face if this object is closed Criar uma face se este objeto estiver fechado - + The number of subdivisions of each edge O número de subdivisões de cada aresta - + Number of faces Número de faces - + Radius of the control circle Raio do círculo de controlo - + How the polygon must be drawn from the control circle Como o polígono deve ser desenhado a partir do círculo de controle - + Projection direction Direção de projeção - + The width of the lines inside this object A largura das linhas dentro deste objeto - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + The spacing between lines of text O espaçamento entre as linhas de texto - + The color of the projected objects A cor dos objetos projetados - + The linked object O objeto vinculado - + Shape Fill Style Estilo do Preenchimento de Forma - + Line Style Estilo da linha - + If checked, source objects are displayed regardless of being visible in the 3D model Se esta casa estiver marcada, objetos fonte serão exibidos mesmo se estão invisíveis na vista 3D - + Create a face if this spline is closed Criar uma face se esta spline estiver fechada - + Parameterization factor Fator de parametrização - + The points of the Bezier curve Os pontos da curva de Bézier - + The degree of the Bezier function O grau da função de Bezier - + Continuity Continuidade - + If the Bezier curve should be closed or not Se a curva de Bézier deve ser fechada ou não - + Create a face if this curve is closed Criar uma face se esta curva estiver fechada - + The components of this block Os componentes deste bloco - + The base object this 2D view must represent O objeto base que esta vista 2D deve representar - + The projection vector of this object O vetor de projeção deste objeto - + The way the viewed object must be projected A maneira como o objeto visualizado deve ser projetada - + The indices of the faces to be projected in Individual Faces mode Os índices das faces a serem projetados no modo Individual Faces - + Show hidden lines Mostrar linhas ocultas - + The base object that must be duplicated O objeto de base que deve ser duplicado - + The type of array to create O tipo de rede a criar - + The axis direction A direção do eixo - + Number of copies in X direction Número de cópias na direção X - + Number of copies in Y direction Número de cópias na direção Y - + Number of copies in Z direction Número de cópias na direção Z - + Number of copies Número de cópias - + Distance and orientation of intervals in X direction Distância e orientação de intervalos na direção X - + Distance and orientation of intervals in Y direction Distância e orientação de intervalos na direção Y - + Distance and orientation of intervals in Z direction Distância e orientação de intervalos na direção Z - + Distance and orientation of intervals in Axis direction Distância e orientação de intervalos na direção do Eixo - + Center point Ponto central - + Angle to cover with copies Ângulo para cobrir com cópias - + Specifies if copies must be fused (slower) Especifica se cópias devem ser fundidas (mais lento) - + The path object along which to distribute objects O caminho do objeto ao longo do qual vão se distribuir os objetos - + Selected subobjects (edges) of PathObj Sub-objetos selecionados (arestas) de PathObj - + Optional translation vector Vetor de deslocamento opcional - + Orientation of Base along path Orientação da Base ao longo do caminho - + X Location Posição de X - + Y Location Posição de Y - + Z Location Posição de Z - + Text string Texto - + Font file name Nome do arquivo fonte - + Height of text Altura do texto - + Inter-character spacing Espaçamento entre caráteres - + Linked faces Rostos vinculados - + Specifies if splitter lines must be removed Especifica se as linhas do divisor devem ser removidas - + An optional extrusion value to be applied to all faces Um valor de extrusão opcional a ser aplicado a todas as faces - + Height of the rectangle Altura do retângulo - + Horizontal subdivisions of this rectangle Subdivisões horizontais deste retângulo - + Vertical subdivisions of this rectangle Subdivisões verticais deste retângulo - + The placement of this object O localizador deste objeto - + The display length of this section plane O comprimento da representação 3D deste plano de corte - + The size of the arrows of this section plane O tamanho das setas deste plano de corte - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Para os modos de CutLines e CutFaces, isto deixa as faces na localização de corte - + The base object is the wire, it's formed from 2 objects O objeto de base é o arame, é formado a partir de 2 objetos - + The tool object is the wire, it's formed from 2 objects A ferramenta de objeto é o arame, é formado a partir de 2 objetos - + The length of the straight segment O comprimento do segmento reto - + The point indicated by this label O ponto indicado por este rótulo - + The points defining the label polyline Os pontos que definem a polilinha do rótulo - + The direction of the straight segment A direção do segmento reto - + The type of information shown by this label O tipo de informação mostrada por este rótulo - + The target object of this label O objeto alvo deste rótulo - + The text to display when type is set to custom O texto a ser exibido quando o tipo está definido como Custom - + The text displayed by this label O texto exibido por este rótulo - + The size of the text O tamanho do texto - + The font of the text A fonte do texto - + The size of the arrow O tamanho da seta - + The vertical alignment of the text O alinhamento vertical do texto - + The type of arrow of this label O tipo de seta deste rótulo - + The type of frame around the text of this object O tipo de quadro em torno do texto deste objeto - + Text color Cor do texto - + The maximum number of characters on each line of the text box O número máximo de caracteres em cada linha da caixa de texto - + The distance the dimension line is extended past the extension lines A distância da linha de cota além das linhas de extensão - + Length of the extension line above the dimension line Comprimento da linha de extensão acima da linha de cota - + The points of the B-spline Os pontos da b-spline - + If the B-spline is closed or not Se a b-spline está fechada ou não - + Tessellate Ellipses and B-splines into line segments Tesselação de Elipses e Bsplines em segmentos de linha - + Length of line segments if tessellating Ellipses or B-splines into line segments Comprimento de segmentos de linha se existir tesselação de Elipses ou Bsplines em segmentos de linha - + If this is True, this object will be recomputed only if it is visible Se isto for verdadeiro, esse objeto será ser recalculado somente se estiver visível - + Base Base - + PointList Lista de Pontos - + Count Quantidade - + The objects included in this clone Os objetos incluídos neste clone - + The scale factor of this clone O fator de escala deste clone - + If this clones several objects, this specifies if the result is a fusion or a compound Se este clone é de vários objetos, especifica se o resultado é uma fusão ou um composto - + This specifies if the shapes sew Especifica se as formas se juntam (costuram) - + Display a leader line or not Exibir uma linha de anotação ou não - + The text displayed by this object O texto exibido por este objeto - + Line spacing (relative to font size) Espaçamento entre linhas (em relação ao tamanho da fonte) - + The area of this object - The area of this object + A área deste objeto - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Exibe um símbolo Dimensão na extremidade do fio - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusão de parede e estrutura do mesmo tipo e material + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Inclinação - + Scale Escalar - + Writing camera position Gravando posição da câmera - + Writing objects shown/hidden state Gravando estado visível dos objetos - + X factor Fator X - + Y factor Fator Y - + Z factor Fator Z - + Uniform scaling Dimensionamento uniforme - + Working plane orientation Orientação do plano de trabalho @@ -781,20 +816,25 @@ Instale o addon de biblioteca de dxf manualmente no menu ferramentas-> Addon Manager - + This Wire is already flat Este traço já está plano - + Pick from/to points Escolha de pontos de/para - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Inclinação para dar aos arames/linhas selecionadas: 0 = horizontal, 1 = 45deg acima, -1 = 45deg para baixo + + + Create a clone + Criar um clone + DraftShapeStringGui @@ -846,28 +886,28 @@ no menu ferramentas-> Addon Manager Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Insira coordenadas ou selecione o ponto com o mouse. Reset 3d point selection - Reset 3d point selection + Redefinir seleção de pontos 3d Reset Point - Reset Point + Redefinir Pontos Draft_AddConstruction - + Add to Construction group Adicionar ao grupo de construção - + Adds the selected objects to the Construction group Adiciona o(s) objeto(s) selecionado(s) ao grupo de construção @@ -875,12 +915,12 @@ no menu ferramentas-> Addon Manager Draft_AddPoint - + Add Point Adicionar ponto - + Adds a point to an existing Wire or B-spline Adiciona um ponto a um arame/bspline existente @@ -888,12 +928,12 @@ no menu ferramentas-> Addon Manager Draft_AddToGroup - + Move to group... Mover para o grupo... - + Moves the selected object(s) to an existing group Adiciona o(s) objeto(s) selecionado(s) a um grupo existente @@ -901,12 +941,12 @@ no menu ferramentas-> Addon Manager Draft_ApplyStyle - + Apply Current Style Aplicar o estilo atual - + Applies current line width and color to selected objects Aplica a espessura de linha e a cor atual aos objetos selecionados @@ -914,46 +954,46 @@ no menu ferramentas-> Addon Manager Draft_Arc - + Arc Arco - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Cria um arco com ponto central e raio. CTRL para fixar, SHIFT para restringir Draft_ArcTools - + Arc tools - Arc tools + Ferramentas de arco Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arco de 3 pontos - + Creates an arc by 3 points - Creates an arc by 3 points + Cria um arco com 3 pontos Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object Cria uma matriz retangular ou polar a partir de um objeto selecionado @@ -961,12 +1001,12 @@ no menu ferramentas-> Addon Manager Draft_AutoGroup - + AutoGroup Auto Agrupar - + Select a group to automatically add all Draft & Arch objects to Escolha um grupo no qual objetos Draft/Arch serão adicionados automaticamente @@ -974,12 +1014,12 @@ no menu ferramentas-> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Cria uma b-spline de múltiplos pontos. CTRL para snap, Shift para restringir @@ -987,12 +1027,12 @@ no menu ferramentas-> Addon Manager Draft_BezCurve - + BezCurve Curva de Bezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Cria uma curva de Bézier. Ctrl para snap, Shift para restringir @@ -1000,20 +1040,20 @@ no menu ferramentas-> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + Ferramentas de Bezier Draft_Circle - + Circle Círculo - + Creates a circle. CTRL to snap, ALT to select tangent objects Cria um círculo. Ctrl para snap, Alt para selecionar objetos tangentes @@ -1021,12 +1061,12 @@ no menu ferramentas-> Addon Manager Draft_Clone - + Clone Clonar - + Clones the selected object(s) Clona o(s) objeto(s) selecionado(s) @@ -1034,12 +1074,12 @@ no menu ferramentas-> Addon Manager Draft_CloseLine - + Close Line Fechar linha - + Closes the line being drawn Fechar a linha que está sendo desenhada @@ -1047,27 +1087,27 @@ no menu ferramentas-> Addon Manager Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Cria uma curva cúbica de Bezier +Clique e arraste para definir pontos de controle. Ctrl para snap, Shift para restringir Draft_DelPoint - + Remove Point Remover ponto - + Removes a point from an existing Wire or B-spline Remove um ponto de um arame ou bspline existente @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensão - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Cria uma cota. Ctrl para snap, Shift para restringir, Alt para selecionar um segmento @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Rebaixar - + Explodes the selected objects into simpler objects, or subtracts faces Explode os objetos selecionados em objetos mais simples, ou subtrai faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Projeto para rascunho - + Convert bidirectionally between Draft and Sketch objects Converter bidirecionalmente entre objetos do projeto e do rascunho @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Desenho - + Puts the selected objects on a Drawing sheet Coloca os objetos selecionados em uma folha de desenho @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Editar - + Edits the active object Edita o objeto ativo @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Editar Melhorada - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Editar os objetos selecionados Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Cria uma elipse. Ctrl para snap @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Cria um objeto facebinder a partir de faces selecionadas @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Finalizar linha - + Finishes a line without closing it Terminar a linha sem fechar @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inverter cota - + Flip the normal direction of a dimension Inverte a direção normal de uma cota @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Corrigir - + Heal faulty Draft objects saved from an earlier FreeCAD version Corrige objetos defeituosos salvos por uma versão anterior do FreeCAD @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Juntar - + Joins two wires together Junta dois arames em um @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Rótulo - + Creates a label, optionally attached to a selected object or element Cria um rótulo, opcionalmente vinculado a um elemento ou objeto selecionado + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linha - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Cria uma linha de 2 pontos. CTRL para snap, Shift para parametrizar @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Espelho - + Mirrors the selected objects along a line defined by two points Espelha os objetos selecionados ao longo de uma linha definida por dois pontos @@ -1275,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Mova os objetos selecionados entre 2 pontos. CTRL para fixar, SHIFT para restringir Draft_Offset - + Offset Deslocamento - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Cria um deslocamento do objeto ativo. CTRL para snap, Shift para restringir, ALT para criar uma cópia @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Cópia múltipla com caminho - + Creates copies of a selected object along a selected path. Cria cópias de um objeto selecionado ao longo de um caminho selecionado @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Ponto - + Creates a point object Criar um objeto ponto @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Matriz de Pontos - + Creates copies of a selected object on the position of points. Cria cópias de um objeto selecionado na posição dos pontos. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Cria um polígono regular. Ctrl para snap, Shift para restringir @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Retângulo - + Creates a 2-point rectangle. CTRL to snap Cria um retângulo com 2 pontos. CTRL para snap @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rotacionar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Rotaciona o objeto selecionado. Ctrl para snap, Shift para restringir, Alt para copiar @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Escalar - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Redimensiona os objetos selecionados a partir de um ponto de base. Ctrl para snap, Shift para restringir, Alt para copiar @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Selecionar grupo - + Selects all objects with the same parents as this group Seleciona todos os objetos com os mesmos pais que este grupo @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Plano de trabalho - + Select a working plane for geometry creation Selecionar um plano de trabalho para a criação de objetos 2D @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Cria um objeto proxy do plano de trabalho atual - + Create Working Plane Proxy Criar proxy de plano de trabalho @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Forma vista 2D - + Creates Shape 2D views of selected objects Cria formas com vistas 2D dos objetos selecionados @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma a partir de texto... - + Creates text string in shapes. Cria uma cadeia de texto em formas. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Mostrar barra de Snap - + Shows Draft snap toolbar Mostra a barra de ferramentas Draft snap @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Definir inclinação - + Sets the slope of a selected Line or Wire Define a inclinação de uma linha ou arame selecionado @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Ângulos - + Snaps to 45 and 90 degrees points on arcs and circles Snap para ângulos de 45 e 90 graus em círculos e arcos @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Ativa o snap no centro de círculos e arcos @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensões - + Shows temporary dimensions when snapping to Arch objects Mostra cotas temporárias quando fizer snap para objetos arquitetônicos @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Ponto de extremidade - + Snaps to endpoints of edges Ativa snap em pontos de extremidade de arestas @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensão - + Snaps to extension of edges Snap nas extensões das arestas @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grade - + Snaps to grid points Snap nos nós da grade @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersecção - + Snaps to edges intersections Snap nas interseções das arestas @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Ligar/desligar - + Activates/deactivates all snap tools at once Ativa/desativa todas as ferramentas de snap - + Lock Travar @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Ponto médio - + Snaps to midpoints of edges Snap em pontos médios das arestas @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Mais próximo - + Snaps to nearest point on edges Snap no ponto mais próximo das arestas @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortogonal - + Snaps to orthogonal and 45 degrees directions Snap em direções ortogonais e a 45 graus @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralelo - + Snaps to parallel directions of edges Snap em direções paralelas a arestas @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snap em pontos perpendiculares nas arestas @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Especial - + Snaps to special locations of objects Snap para pontos especiais de objetos @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plano de trabalho - + Restricts the snapped point to the current working plane Restringe o snap ao plano de trabalho atual @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Separar - + Splits a wire into two wires Divide um arame em dois @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Extender - + Stretches the selected objects Estica os objetos selecionados @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Cria uma anotação. CTRL para snap @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Alterna o modo de construção para os próximos objetos. - + Toggle Construction Mode Ativar / desativar o modo de construção @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Alternar modo contínuo - + Toggles the Continue Mode for next commands. Alterna o modo de continuar para os próximos comandos @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Alternar o modo de exibição - + Swaps display mode of selected objects between wireframe and flatlines Muda o modo de exibição dos objetos selecionados entre Arame e Linhas planas @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Alternar grade - + Toggles the Draft grid on/off Ativa/desativa a grade - + Grid Grade - + Toggles the Draft grid On/Off Ativa/desativa a grade @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Apara ou estende o objeto selecionado ou extruda faces. Ctrl para snap, Shift restringe ao segmento atual ou ao seu normal, Alt inverte @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Desfazer o último segmento - + Undoes the last drawn segment of the line being drawn Desfaz o último segmento da linha que está sendo desenhada @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Promover - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Junta os objetos selecionados em um, ou converte arames fechados em faces preenchidas, ou une faces - - Draft_VisGroup - - - VisGroup - GrupoVis - - - - Adds a VisGroup - Adiciona um GrupoVis - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Cria um DraftWire de múltiplos pontos (DWire). Ctrl para snap, Shift para restringir + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Arame para B-Spline - + Converts between Wire and B-spline Converte entre o arame e B-Spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Configurações gerais do módulo rascunho - + This is the default color for objects being drawn while in construction mode. Esta é a cor padrão para objetos desenhados no modo de construção. - + This is the default group name for construction geometry Este é o nome padrão para o grupo de geometria de construção - + Construction Construção @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSalvar a cor e espessura de linha atual entre sessões - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Se essa opção estiver marcada, o modo de cópia será mantido entre comandos sucessivos, caso contrário os comandos sempre iniciarão em modo "sem cópia" - + Global copy mode Modo de cópia global - + Default working plane Plano de trabalho padrão - + None Nenhum - + XY (Top) XY (Cima) - + XZ (Front) XZ (Frente) - + YZ (Side) YZ (Lateral) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Configurações gerais - + Construction group name Nome do grupo de construção - + Tolerance Tolerância @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Aqui você pode especificar um diretório contendo arquivos SVG contendo definições <pattern> que podem ser adicionadas às hachuras padrão do rascunho - + Draft interface mode Modo de interface do rascunho - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Este é o modo de interface do usuário em que o módulo Draft irá trabalhar: O Modo barra de ferramentas coloca todas as configurações do rascunho em uma barra de ferramentas em separada, enquanto o modo Visualização de tarefa utiliza o sistema de interação com o usuário do FreeCAD - + Toolbar Toolbar - + Taskview Visualização de tarefas @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Modo Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalmente, depois de copiar objetos, as cópias ficam selecionadas. Se selecionado, em vez disso, os objetos-base serão selecionados. - + Select base objects after copying Selecionar objetos de base após a cópia @@ -2100,7 +2135,7 @@ such as "Arial:Bold" As linhas principais serão representadas mais espessas. Especifique aqui quantos quadrados deseja entre as linhas principais. - + Internal precision level Nível de precisão interno @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Transformar linhas de cor branca para preto - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Se essa opção estiver marcada, as ferramentas de Draft irão criar peças primitivas em vez de objetos do Draft, quando possível. - + Use Part Primitives when available Usar peças primitivas quando disponíveis @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Snap sempre ativo (desativar tecla de snap) - - Construction geometry - Geometria de construção - - - + Construction geometry color Cor da geometria de construção @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Selecione um arquivo de fonte - + Fill objects with faces whenever possible Preencher objetos com faces sempre que possível @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Atualização automática (apenas importador antigo) - + Prefix labels of Clones with: Prefixo para rótulos de clones: @@ -2714,7 +2744,7 @@ Ex: para arquivos em milímetros: 1, em centímetros: 10, em metros: 1000, em po Este é o método escolhido para importar a cor dos objetos SVG no FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Se selecionado, objetos aparecerão preenchidos como padrão. Caso contrário, eles serão exibidos como arame @@ -2794,17 +2824,7 @@ Ex: para arquivos em milímetros: 1, em centímetros: 10, em metros: 1000, em po Se selecionado, objetos das mesmas camadas serão reunidos em blocos, para agilizar a exibição, mas dificultando a edição - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Se isto estiver marcado, instruções passo-a-passo serão exibidas na Janela de Saída durante a execução de comandos de Esboço - - - - Verbose command line mode - Modo de linha de comando detalhado - - - + When drawing lines, set focus on Length instead of X coordinate Quando desenhar linhas, por o foco no comprimento em vez da coordenada X @@ -2884,709 +2904,857 @@ Ex: para arquivos em milímetros: 1, em centímetros: 10, em metros: 1000, em po Segmento de Spline máximo: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Algarismos significativos em operações internas de coordenadas (por ex: 3 = 0.001). Geralmente, valores entre 6 e 8 são considerados os melhores custo-benefício entre os usuários do FreeCAD. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Se uma função requerer tolerância, esse é o valor usado. +Valores com diferenças menores serão tratados como iguais. Esse valor será depreciado em breve, o nível de precisão controlará ambos. Use legacy python exporter - Use legacy python exporter + Use o importador python antigo (legacy) + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria de construção + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativo + + + + R + R + + + + Continue + Continuar + + + + T + T + + + + Close + Fechar + + + + O + O + + + + Copy + Copiar + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Preenchimento + + + + L + L + + + + Exit + Sair + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Comprimento + + + + H + H + + + + Wipe + Limpar + + + + W + W + + + + Set WP + Definir Plano de Trabalho + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restringir X + + + + X + X + + + + Restrict Y + Restringir Y + + + + Y + Y + + + + Restrict Z + Restringir Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Traço Snap - - - Draft creation tools - Ferramentas de criação do projeto - - - - Draft modification tools - Ferramentas de modifição do projeto - - - - Utilities - Utilitários - - - - Wire tools - Ferramentas de arame - - - - Snapping - Snap - draft - + not shape found nenhuma forma encontrada - + All Shapes must be co-planar Todas as formas devem ser coplanares - + The given object is not planar and cannot be converted into a sketch. Este objeto não é planar e não pode ser convertido em um esboço. - + Unable to guess the normal direction of this object Não foi possível detectar a direção normal deste objeto - + Draft Command Bar Barra de comando Traço - + Toggle construction mode Ativar / desativar o modo de construção - + Current line color Cor de linha atual - + Current face color Cor de face atual - + Current line width Espessura de linha atual - + Current font size Tamanho de fonte atual - + Apply to selected objects Aplicar aos objetos selecionados - + Autogroup off Autogrupo desligado - + active command: comando ativo: - + None Nenhum - + Active Draft command Ação ativa - + X coordinate of next point Coordenada X do ponto seguinte - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y do ponto seguinte - + Z coordinate of next point Coordenada Z do ponto seguinte - + Enter point Inserir ponto - + Enter a new point with the given coordinates Inserir um novo ponto nas coordenadas indicadas - + Length Comprimento - + Angle Ângulo - + Length of current segment Comprimento de segmento atual - + Angle of current segment Ângulo de segmento atual - + Radius Raio - + Radius of Circle Raio do círculo - + If checked, command will not finish until you press the command button again Se selecionado, o comando não terminará até que você pressione o ícone dele novamente - + If checked, an OCC-style offset will be performed instead of the classic offset Selecionado, o offset será feito no modo OCC em vez do modo clássico - + &OCC-style offset Modo &OCC - + Add points to the current object Adicionar pontos ao objeto atual - + Remove points from the current object Remover pontos do objeto atual - + Make Bezier node sharp Fazer nó estrito - + Make Bezier node tangent Fazer nó tangente - + Make Bezier node symmetric Fazer nó simétrico - + Sides Lados - + Number of sides Número de lados - + Offset Deslocamento - + XY (top) XY (topo) - - Select XY plane - Selecionar plano XY - - - + XZ (front) XZ (frente) - - Select XZ plane - Selecionar plano XZ - - - + YZ (side) YZ (lado) - - Select YZ plane - Selecionar plano YZ - - - + View Vista - - Select plane perpendicular to the current view - Selecionar plano perpendicular à vista atual - - - + Auto Auto - - Do not project points to a drawing plane - Não projetar pontos no plano de desenho - - - + Text string to draw Texto a ser desenhado - + String Texto - + Height of text Altura do texto - + Height Altura - + Intercharacter spacing Espaçamento entre caráteres - + Tracking Rastreamento - + Full path to font file: Caminho completo para o arquivo de fonte: - + Open a FileChooser for font file Abre um diálogo para escolher um arquivo de fonte - + Grid spacing Espaçamento da grade - + The spacing between the grid lines O espaçamento entre cada linha da grade - + Main line every Toda linha principal - + The number of lines between main lines O número de linhas entre cada linha principal - + Center plane on view Centralizar plano de trabalho - - Select Plane - Selecionar plano - - - + Line Linha - + DWire DWire - + Circle Círculo - + Center X Centro X - + Arc Arco - + Point Ponto - + Label Rótulo - + Distance Distância - + Trim Aparar - + Pick Object Selecionar objeto - + Edit Editar - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Tamanho inválido. Usando 200,0. - + Invalid Tracking value. Using 0. Rastreamento inválido. Usando 0. - + Please enter a text string. Por favor, insira um texto. - + Select a Font file Selecione um arquivo de fonte - + Please enter a font file. Por favor, insira um arquivo de fonte. - + Autogroup: Auto Agrupar: - + Faces Faces - + Remove Remover - + Add Adicionar - + Facebinder elements Elementos da Película - + Create Line Criar linha - - Pick next point: - - Escolha o ponto seguinte: - - - + Convert to Wire Converter em Arestas - + BSpline BSpline - + BezCurve Curva de Bezier - + Create BezCurve Criar uma curva de Bezier - + Rectangle Retângulo - + Create Plane Criar um plano - + Create Rectangle Criar Retângulo - + Create Circle Criar Círculo - + Create Arc Criar Arco - + Start Angle Ângulo inicial - + Aperture Abertura - + Polygon Polígono - + Create Polygon Criar Polígono - + Ellipse Elipse - + Create Ellipse Criar uma elipse - + Text Texto - + Create Text Criar texto - + Dimension Dimensão - + Create Dimension Criar Dimensão - + ShapeString ShapeString - + Create ShapeString Criar um ShapeString - + Copy Copiar - + Move Mover - + Change Style Alterar estilo - + Rotate Rotacionar - - Cannot offset this object type - - Não é possível gerar offset desse tipo de objeto - - - + Stretch Extender - + Upgrade Promover - + Downgrade Rebaixar - + Selection is not a Knot A seleção não é um nó - + Convert to Sketch Converter para esboço - + Convert to Draft Converter para traço - + Convert Converter - + Array Matriz - + Create Point Criar um ponto - + Mirror Espelho - + &Draft &Projeto @@ -3609,179 +3777,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. - + Draft.makeBSpline: not enough points Draft.makeBSpline: pontos insuficientes - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Pontos de extremidade iguais, fecho forçado - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Lista de pontos inválida - + No object given Nenhum objeto dado - + The two points are coincident Os dois pontos são coincidentes - + Found groups: closing each open object inside Grupos encontrados: fechando cada objeto aberto contido - + Found mesh(es): turning into Part shapes Malha(s) encontrada(s): transformando em formas de peça - + Found 1 solidifiable object: solidifying it Encontrado 1 objeto solidificavel: criando um sólido - + Found 2 objects: fusing them Encontrado 2 objetos: fundindo-os - + Found several objects: creating a shell Vários objetos encontrados: criando casca (shell) - + Found several coplanar objects or faces: creating one face Encontrado vários objetos ou faces coplanares: criando uma face - + Found 1 non-parametric objects: draftifying it Encontrado 1 objetos não paramétricos: esboçando - + Found 1 closed sketch object: creating a face from it 1 esboço fechado (sketch) encontrado: criando uma face dele - + Found 1 linear object: converting to line Encontrado 1 objeto linear: convertendo para linha - + Found closed wires: creating faces Encontrado arames fechados: criando faces - + Found 1 open wire: closing it Encontrado 1 arame aberto: fechando - + Found several open wires: joining them Encontrado vários arames abertos: juntando - + Found several edges: wiring them Encontrado várias arestas: conectando - + Found several non-treatable objects: creating compound Encontrado vários objetos não tratáveis: criando compostos - + Unable to upgrade these objects. Não é possível atualizar esses objetos. - + Found 1 block: exploding it Encontrado 1 bloco: explodindo - + Found 1 multi-solids compound: exploding it Encontrado 1 composto multi-sólido: explodindo - + Found 1 parametric object: breaking its dependencies Encontrado 1 objeto paramétrico: quebrando suas dependências - + Found 2 objects: subtracting them Encontrado 2 objetos: subtraindo - + Found several faces: splitting them Encontrado vários rostos: dividi-los - + Found several objects: subtracting them from the first one Encontrado vários objetos: subtraindo-os do primeiro - + Found 1 face: extracting its wires Encontrado 1 face: extraindo seus fios - + Found only wires: extracting their edges Encontrado apenas arames: extraindo suas arestas - + No more downgrade possible Não há mais regressão possível - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Fechado com o mesmo primeiro/último ponto. Geometria não atualizada. - + No point found Nenhum ponto encontrado - + ShapeString: string has no wires ShapeString: O texto não contém arames - + Relative Relativo - + Continue Continuar - + Close Fechar @@ -3826,7 +3994,7 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Restringir Z - + Select edge Selecionar aresta @@ -3841,7 +4009,7 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Modo comprimento - + Wipe Limpar @@ -3856,513 +4024,636 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Alternar objeto snapeado - + Check this to lock the current angle Marcar para bloquear o ângulo atual - + Coordinates relative to last point or absolute Coordenadas relativas ao último ponto ou absolutas - + Filled Preenchido - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Marcar para o objeto aparecer preenchido, caso contrário ele será mostrado como aramado (wireframe) - - - + Finish Concluir - + Finishes the current drawing or editing operation Termina o desenho atual ou a operação de edição - + &Undo (CTRL+Z) &Desfazer (CTRL+Z) - + Undo the last segment Desfazer o último segmento - + Finishes and closes the current line Termina e fecha a linha atual - + Wipes the existing segments of this line and starts again from the last point Limpa os segmentos existentes desta linha e começa novamente a partir do último ponto - + Set WP Definir Plano de Trabalho - + Reorients the working plane on the last segment Reorienta o plano de trabalho para o último segmento - + Selects an existing edge to be measured by this dimension Seleciona uma aresta existente a ser medida por esta dimensão - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Se isto estiver marcado, os objetos serão copiados em vez de deslocados. Use Preferências -> Draft -> Modo cópia global para manter este modo nas próximas operações - - options - opções - - - + Default Padrão - + Pick a face to define the drawing plane Escolha uma face para definir o plano de desenho - - First point: - Primeiro ponto: - - - - Closing - Fechando - - - + Create Wire Criar arame - - Removing last point - Removendo o último ponto - - - - Next point: - Próximo ponto: - - - - Restarting from - Reiniciando desde - - - + Unable to create a Wire from selected objects Não foi possível criar um arame a partir dos objetos selecionados - + Spline has been closed A Spline foi fechada - + Last point has been removed O último ponto foi removido - - Pick next point, or Finish (shift-F) or close (o): - Escolher o próximo ponto, ou finalizar (shift-F) ou fechar (o): - - - + Create B-spline Criar B-spline - + Bezier curve has been closed A curva de Bezier foi fechada - - Pick first point: - Escolha o primeiro ponto: - - - - Pick opposite point: - Escolha o ponto oposto: - - - - Pick center point: - Escolha o centro: - - - - Pick radius: - Indique o raio: - - - - Pick start angle: - Indique o ângulo inicial: - - - - Pick aperture: - Escolhe a abertura: - - - - Aperture angle: - Ângulo de abertura: - - - - Pick location point: - Escolha o ponto de localização: - - - + Edges don't intersect! As aresta não se cruzam! - + Pick ShapeString location point: Escolha o ponto de localização do ShapeString: - + Select an object to move Selecione um objeto para mover - - Pick start point: - Escolha o ponto de origem: - - - - Pick end point: - Escolha um ponto final: - - - + Select an object to rotate Selecione um objeto a ser rotacionado - - Pick rotation center: - Escolha o centro de rotação: - - - - Pick base angle: - Escolha o ângulo de referência: - - - - Pick rotation angle: - Escolha o ângulo de rotação: - - - + Select an object to offset Selecionar um objeto para deslocamento paralelo - + Offset only works on one object at a time Deslocamento paralelo só funciona com um objeto de cada vez - + Sorry, offset of Bezier curves is currently still not supported Desculpe, o deslocamento paralelo de curvas Bézier não é suportado no momento - - Pick distance: - Indique a distância: - - - + Select an object to stretch Selecione um objeto para esticar - - Pick first point of selection rectangle: - Escolha o primeiro ponto do retângulo de seleção: - - - - Pick opposite point of selection rectangle: - Escolha o ponto oposto do retângulo de seleção: - - - - Pick start point of displacement: - Escolha o ponto inicial do deslocamento: - - - - Pick end point of displacement: - Escolha o ponto final do deslocamento: - - - + Turning one Rectangle into a Wire Convertendo um retângulo em arame - + Select an object to join Selecione um objeto para juntar - + Join Juntar - + Select an object to split Selecione um objeto para dividir - + Select an object to upgrade Selecione um objeto para promover - + Select object(s) to trim/extend Selecione objetos para aparar/estender (trim/extend) - + Unable to trim these objects, only Draft wires and arcs are supported Não é possível aparar estes objetos, somente arames e arcos são suportados - + Unable to trim these objects, too many wires Não é possível aparar estes objetos: número de arames muito alto - + These objects don't intersect Esses objetos não se cruzam - + Too many intersection points Número muito alto de pontos de interseção - + Select an object to scale Selecione um objeto para escalar - - Pick base point: - Escolha o ponto de referência: - - - - Pick reference distance from base point: - Escolha a distância ao ponto de referência: - - - - Pick new distance from base point: - Escolha uma nova distância ao ponto de referência: - - - + Select an object to project Selecione um objeto a projetar - - This object type is not editable - Este tipo de objeto não é editável - - - + Please select only one object Por favor, selecione apenas um objeto - + Select a Draft object to edit Selecione um objeto Traço para editar - + Active object must have more than two points/nodes O objeto ativo deve ter mais de dois pontos/nós - + Endpoint of BezCurve can't be smoothed O ponto de extremidade desta curva não pode ser suavizado - + Select an object to convert Selecione um objeto para converter - + Select an object to array Selecione um objeto para criar matriz - + Please select base and path objects Por favor selecione um objeto base e uma trajetória - + Please select base and pointlist objects Por favor selecione um objeto base e uma nuvem de pontos - + Select an object to clone Selecione um objeto para clonar - + Select face(s) on existing object(s) Selecione face(s) em objeto(s) existente(s) - + Select an object to mirror Selecione um objeto a ser espelhado - - Pick start point of mirror line: - Escolha o ponto inicial da linha de simetria: - - - - Pick end point of mirror line: - Escolha o ponto final da linha de simetria: - - - + This tool only works with Wires and Lines Esta ferramenta só funciona com arames e linhas - - - Pick target point: - Escolha o ponto de destino: - - - - Pick endpoint of leader line: - Escolha o ponto final da linha de chamada: - - - - Pick text position: - Escolha a posição do texto: - ODA (formerly Teigha) File Converter not found, DWG support is disabled O aplicativo ODA File Converter (antigamente Teigha) não foi encontrado. O suporte a DWG está desativado - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s compartilha uma base com %d outros objetos. Por favor verifique se deseja modificar isso. Subelement mode - Subelement mode + Modo de sub-elemento - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Alternar edição de arco por raio e angulo - + Modify subelements - Modify subelements + Modificar sub-elementos - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Se marcado, os sub-elementos serão modificados em vez de todos os objetos - + CubicBezCurve - CubicBezCurve + CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Alguns sub-elementos não puderam ser movidos. - + Scale Escalar - + Some subelements could not be scaled. - Some subelements could not be scaled. + Alguns sub-elementos não foram redimensionados. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + O desenho da parede de base é muito complexo para editar: É sugerido editar o desenho diretamente + + + + Top + Topo + + + + Front + Frente + + + + Side + Lateral + + + + Current working plane + Plano de trabalho atual + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automática + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotação + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Selecione um objeto para editar + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Projeto + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitários + + + + Wire tools + Ferramentas de arame + + + + Snapping + Snap diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index b32182f7bc..a041d50506 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index df74125d96..f57cb0e741 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Define um padrão de trama - + Sets the size of the pattern Define o tamanho do padrão - + Startpoint of dimension Ponto inicial da cotagem - + Endpoint of dimension Ponto Final da cotagem - + Point through which the dimension line passes Ponto através do qual passa a linha de cotagem - + The object measured by this dimension O objeto medido por esta cotagem - + The geometry this dimension is linked to A geometria a que esta cotagem se refere - + The measurement of this dimension A medida desta cotagem - + For arc/circle measurements, false = radius, true = diameter Para medidas de arco/círculo, falso = raio, verdadeiro = diâmetro - + Font size Tamanho da fonte - + The number of decimals to show O número de casas decimais a mostrar - + Arrow size Tamanho da seta - + The spacing between the text and the dimension line O espaçamento entre o texto e a linha de cotagem - + Arrow type Tipo de seta - + Font name Nome da fonte - + Line width Largura da linha - + Line color Cor da linha - + Length of the extension lines Comprimento das linhas de extensão - + Rotate the dimension arrows 180 degrees Girar as setas da cotagem 180 graus - + Rotate the dimension text 180 degrees Girar o texto da cotagem 180 graus - + Show the unit suffix Mostrar o sufixo de unidade - + The position of the text. Leave (0,0,0) for automatic position Posição do texto. Deixe (0, 0,0) para posição automática - + Text override. Use $dim to insert the dimension length Substituição de texto. Use $dim para inserir o comprimento de cotagem - + A unit to express the measurement. Leave blank for system default Uma unidade para expressar a medição. Deixe em branco para o padrão do sistema - + Start angle of the dimension Ângulo inicial da cotagem - + End angle of the dimension Ângulo final da cotagem - + The center point of this dimension O ponto central desta cotagem - + The normal direction of this dimension A direção normal desta cotagem - + Text override. Use 'dim' to insert the dimension length Substituição de texto. Use $dim para inserir o comprimento de cotagem - + Length of the rectangle Comprimento do retângulo - + Radius to use to fillet the corners Raio a usar para bolear (fillet) os cantos - + Size of the chamfer to give to the corners Tamanho do chanfro para dar aos cantos - + Create a face Criar uma face - + Defines a texture image (overrides hatch patterns) Define uma imagem de textura (Substitui os padrões de trama) - + Start angle of the arc Ângulo inicial do arco - + End angle of the arc (for a full circle, give it same value as First Angle) Ângulo final do arco (para um círculo completo, dê o mesmo valor do Primeiro Ângulo) - + Radius of the circle Raio do círculo - + The minor radius of the ellipse O menor raio da elipse - + The major radius of the ellipse O raio maior da elipse - + The vertices of the wire Os vértices do traço - + If the wire is closed or not Se o traço está fechado ou não - + The start point of this line O ponto de partida desta linha - + The end point of this line O ponto final desta linha - + The length of this line O comprimento desta linha - + Create a face if this object is closed Criar uma face se este objeto estiver fechado - + The number of subdivisions of each edge O número de sub-divisões de cada aresta - + Number of faces Número de faces - + Radius of the control circle Raio do círculo de controlo - + How the polygon must be drawn from the control circle Como o polígono deve ser desenhado a partir do círculo de controle - + Projection direction Direção da projeção - + The width of the lines inside this object A largura das linhas dentro deste objeto - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + The spacing between lines of text O espaçamento entre as linhas de texto - + The color of the projected objects A cor dos objetos projetados - + The linked object O objeto ligado - + Shape Fill Style Estilo do Preenchimento de Forma - + Line Style Estilo da linha - + If checked, source objects are displayed regardless of being visible in the 3D model Se marcado, objetos são mostrados independente de estarem visível no modelo 3D - + Create a face if this spline is closed Criar uma face se esta spline estiver fechada - + Parameterization factor Fator de parametrização - + The points of the Bezier curve Os pontos da curva de Bézier - + The degree of the Bezier function O grau da função de Bezier - + Continuity Continuidade - + If the Bezier curve should be closed or not Se a curva de Bézier deve ser fechada ou não - + Create a face if this curve is closed Criar uma face se esta curva estiver fechada - + The components of this block Os componentes deste bloco - + The base object this 2D view must represent O objeto base que esta vista 2D deve representar - + The projection vector of this object O vetor de projeção deste objeto - + The way the viewed object must be projected A maneira como o objeto visualizado deve ser projetado - + The indices of the faces to be projected in Individual Faces mode Os índices das faces a serem projetados no modo individual de Faces - + Show hidden lines Mostrar linhas ocultas - + The base object that must be duplicated O objeto de base que deve ser duplicado - + The type of array to create O tipo de matriz (array) a criar - + The axis direction A direção do eixo - + Number of copies in X direction Número de cópias na direção X - + Number of copies in Y direction Número de cópias na direção Y - + Number of copies in Z direction Número de cópias na direção Z - + Number of copies Número de cópias - + Distance and orientation of intervals in X direction Distância e orientação de intervalos na direção X - + Distance and orientation of intervals in Y direction Distância e orientação de intervalos na direção Y - + Distance and orientation of intervals in Z direction Distância e orientação de intervalos na direção Z - + Distance and orientation of intervals in Axis direction Distância e orientação de intervalos na direção do Eixo - + Center point Ponto central - + Angle to cover with copies Ângulo para cobrir com cópias - + Specifies if copies must be fused (slower) Especifica se as cópias devem ser fundidas (mais lento) - + The path object along which to distribute objects O caminho ao longo do qual se vão distribuir objetos - + Selected subobjects (edges) of PathObj Sub-objetos selecionados (arestas) de PathObj - + Optional translation vector Vetor de translação opcional - + Orientation of Base along path Orientação da Base ao longo do caminho - + X Location Localização X - + Y Location Localização Y - + Z Location Localização Z - + Text string Texto - + Font file name Nome do ficheiro do tipo de letra - + Height of text Altura do texto - + Inter-character spacing Espaçamento entre carateres - + Linked faces Faces ligadas - + Specifies if splitter lines must be removed Especifica se as linhas divisórias devem ser removidas - + An optional extrusion value to be applied to all faces Um valor de extrusão opcional a ser aplicado a todas as faces - + Height of the rectangle Altura do retângulo - + Horizontal subdivisions of this rectangle Subdivisões horizontais deste retângulo - + Vertical subdivisions of this rectangle Subdivisões verticais deste retângulo - + The placement of this object A posição deste objeto - + The display length of this section plane Comprimento da representação 3D deste plano de corte - + The size of the arrows of this section plane Tamanho das setas deste plano de corte - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Para os modos de LinhasCortadas e FacesCortadas, isto deixa as faces na localização do corte - + The base object is the wire, it's formed from 2 objects O objeto de base é o traço, é formado a partir de 2 objetos - + The tool object is the wire, it's formed from 2 objects A ferramenta de objeto é o traço, é formado a partir de 2 objetos - + The length of the straight segment O comprimento do segmento de reta - + The point indicated by this label O ponto indicado por esta etiqueta - + The points defining the label polyline Os pontos que definem a polilinha da etiqueta - + The direction of the straight segment A direção do segmento de reta - + The type of information shown by this label O tipo de informação mostrada por esta etiqueta - + The target object of this label O objeto alvo desta etiqueta - + The text to display when type is set to custom O texto a ser exibido quando o tipo está definido para personalizado - + The text displayed by this label O texto exibido por esta etiqueta - + The size of the text O tamanho do texto - + The font of the text O tipo de letra do texto - + The size of the arrow O tamanho da seta - + The vertical alignment of the text O alinhamento vertical do texto - + The type of arrow of this label O tipo de seta desta etiqueta - + The type of frame around the text of this object O tipo de moldura em torno do texto deste objeto - + Text color Cor do texto - + The maximum number of characters on each line of the text box O número máximo de caracteres em cada linha da caixa de texto - + The distance the dimension line is extended past the extension lines A distância da linha de cotagem para além das linhas de extensão - + Length of the extension line above the dimension line Comprimento da linha de extensão acima da linha de cotagem - + The points of the B-spline Os pontos da b-spline - + If the B-spline is closed or not Se a b-spline está fechada ou não - + Tessellate Ellipses and B-splines into line segments Suavização de serrilhado em elipses e B-splines como segmentos de linha - + Length of line segments if tessellating Ellipses or B-splines into line segments Comprimento dos segmentos de linha se existir tesselação de Elipses ou Bsplines como segmentos de linha - + If this is True, this object will be recomputed only if it is visible Se isto for verdadeiro, este objeto será ser recalculado somente se estiver visível - + Base Base - + PointList Lista de Pontos - + Count Contagem - + The objects included in this clone Os objetos incluídos neste clone - + The scale factor of this clone O fator de escala deste clone - + If this clones several objects, this specifies if the result is a fusion or a compound Se clonar vários objetos, especifica se o resultado é uma fusão ou um composto - + This specifies if the shapes sew Especifica se as formas se juntam (costuram) - + Display a leader line or not Mostrar uma linha de chamada ou não - + The text displayed by this object O texto exibido por este objeto - + Line spacing (relative to font size) Espaçamento entre linhas (em relação ao tamanho da fonte) - + The area of this object - The area of this object + A área deste objeto - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Inclinação - + Scale Escala - + Writing camera position Gravar a posição da câmara - + Writing objects shown/hidden state Gravar estado de visibilidade dos objetos - + X factor Fator x - + Y factor Fator Y - + Z factor Fator Z - + Uniform scaling Escala uniforme - + Working plane orientation Orientação do plano de trabalho @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager O download de bibliotecas dxf falhou. Instale o addon de biblioteca de dxf manualmente no menu ferramentas-> Addon Manager - + This Wire is already flat Este traço já está plano - + Pick from/to points Escolha de pontos de/para - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Inclinação para dar às arestas/linhas selecionadas: 0 = horizontal, 1 = 45deg acima, -1 = 45deg para baixo + + + Create a clone + Criar um clone + DraftShapeStringGui @@ -860,12 +900,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Adicionar ao grupo Construção - + Adds the selected objects to the Construction group Adiciona os objetos selecionados para o grupo Construção @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Adicionar Ponto - + Adds a point to an existing Wire or B-spline Adiciona um ponto a um traço ou a uma B-spline existente @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Mover para o grupo... - + Moves the selected object(s) to an existing group Move o(s) objeto(s) selecionado(s) para um grupo existente @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Aplicar Estilo Atual - + Applies current line width and color to selected objects Aplica a espessura e cor da linha atual aos objetos selecionados @@ -912,12 +952,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Arco - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -925,7 +965,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -933,12 +973,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -946,12 +986,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object Cria uma matriz polar ou retangular de um objeto selecionado @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup Auto Agrupar - + Select a group to automatically add all Draft & Arch objects to Escolha um grupo ao qual objetos Draft/Arch serão adicionados automaticamente @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Cria uma b-spline com múltiplos pontos. CTRL para Alinhamento e atração (snap), Shift para restringir @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Curva de Bezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Cria uma curva de Bezier. CTRL para snap, SHIFT para restringir @@ -998,7 +1038,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1006,12 +1046,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Círculo - + Creates a circle. CTRL to snap, ALT to select tangent objects Cria um círculo. CTRL p/ alinhamento e atração (snap), ALT p/ selecionar objetos tangentes @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Clonar - + Clones the selected object(s) Clona o(s) objeto(s) selecionado(s) @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Fechar Linha - + Closes the line being drawn Fecha a linha que se está a desenhar @@ -1045,12 +1085,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1060,12 +1100,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Remover Ponto - + Removes a point from an existing Wire or B-spline Remove um ponto de um traço ou bspline existente @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Cotagem - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Cria uma cotagem. CTRL p/ alinhamento e atração (snap), SHIFT p/ restringir, ALT p/ selecionar um segmento @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Despromover - + Explodes the selected objects into simpler objects, or subtracts faces Explode os objetos selecionados em objetos mais simples, ou subtrai faces @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Draft para Sketch - + Convert bidirectionally between Draft and Sketch objects Converter bidirecionalmente entre objetos de Rascunho e Esboço @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Desenho - + Puts the selected objects on a Drawing sheet Coloca os objetos selecionados numa folha de desenho @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Editar - + Edits the active object Edita o objeto ativo @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Criar uma elipse. CTRL para alinhamento e atração (snap) @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Criar um objeto facebinder a partir de face(s) selecionada(s) @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Terminar linha - + Finishes a line without closing it Termina uma linha sem a fechar @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inverter cota - + Flip the normal direction of a dimension Inverter a direção normal de uma cota @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Corrigir - + Heal faulty Draft objects saved from an earlier FreeCAD version Corrige objetos (Draft) defeituosos salvos por uma versão anterior do FreeCAD @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Juntar - + Joins two wires together Juntar dois traços @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Rótulo - + Creates a label, optionally attached to a selected object or element Cria uma etiqueta, anexada opcionalmente a um objeto ou elemento + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linha - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Cria uma linha de 2 pontos. CTRL p/ ajustar, SHIFT p/ restringir @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Espelho (simetria) - + Mirrors the selected objects along a line defined by two points Espelha os objetos selecionados ao longo de uma linha definida por dois pontos @@ -1273,12 +1321,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1286,12 +1334,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Deslocamento paralelo - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Cria deslocamento paralelo ao objeto selecionado. CTRL para conectar, SHIFT para parametrizar, ALT para copiar @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Cópia múltipla com caminho - + Creates copies of a selected object along a selected path. Cria cópias de um objeto selecionado ao longo de um caminho. @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Ponto - + Creates a point object Criar um objeto ponto @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Matriz de Pontos - + Creates copies of a selected object on the position of points. Cria cópias de um objeto selecionado sobre a posição dos pontos. @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Cria um polígono regular. CTRL para conectar (Snap), SHIFT para restringir @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Retângulo - + Creates a 2-point rectangle. CTRL to snap Cria um retângulo de 2 pontos. CTRL p/ ajustar @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rodar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roda os objetos selecionados. CTRL p/ Ajustar, SHIFT p/ restringir, ALT cria uma cópia @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Escala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Redimensione um objeto desde um ponto base. CTRL para conectar, SHIFT para restringir, ALT para copiar @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Selecione o grupo - + Selects all objects with the same parents as this group Seleciona todos os objetos com as mesmas origens como grupo @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane SelecionarPlano - + Select a working plane for geometry creation Selecione um plano de trabalho para a criação da geometria @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Cria um objeto proxy do plano de trabalho atual - + Create Working Plane Proxy Criar proxy do plano de trabalho @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Visualizar Forma em 2D - + Creates Shape 2D views of selected objects Cria vista em 2D dos objetos selecionados @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma a partir de texto... - + Creates text string in shapes. Cria cadeia de texto em formas. @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Mostrar barra de Alinhamento e atração (snap) - + Shows Draft snap toolbar Mostra a barra de ferramentas de Alinhamento e atração (snap) do Draft @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Definir inclinação - + Sets the slope of a selected Line or Wire Define a inclinação de uma linha ou traço selecionado @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Ângulos - + Snaps to 45 and 90 degrees points on arcs and circles Ativa o alinhamento para ângulos de 45 e 90 graus em círculos e arcos @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Atrair ao centro de círculos e arcos @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensões - + Shows temporary dimensions when snapping to Arch objects Mostra cotas temporárias quando fizer snap a objetos arquitetónicos @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Ponto de extremidade - + Snaps to endpoints of edges Ativar a atração a pontos de extremidade das arestas @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensão (prolongamento) - + Snaps to extension of edges Atrair ao prolongamento das arestas @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grelha - + Snaps to grid points Atrair aos pontos da grelha @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Interseção - + Snaps to edges intersections Atrair às interseções das arestas @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Ligar/desligar - + Activates/deactivates all snap tools at once Activa/desactiva todas as ferramentas de Alinhamento e atração (snap) - + Lock Bloqueio @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Ponto médio - + Snaps to midpoints of edges Atrair aos pontos médios das arestas @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Mais próximo - + Snaps to nearest point on edges Atrair ao ponto mais próximo das arestas @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortogonal - + Snaps to orthogonal and 45 degrees directions Alinhar em direções ortogonais e a 45 graus @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralelo - + Snaps to parallel directions of edges Alinhar nas direções paralelas às arestas @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Atrair aos pontos perpendiculares às arestas @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Especial - + Snaps to special locations of objects Atrair aos pontos especiais dos objetos @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plano de trabalho - + Restricts the snapped point to the current working plane Projeta o ponto no plano de trabalho atual @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Separar - + Splits a wire into two wires Separa um traço em dois traços @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Esticar - + Stretches the selected objects Estica os objetos selecionados @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Cria uma anotação. CTRL para ajustar @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Liga/Desliga o Modo de Construção para os objetos seguintes. - + Toggle Construction Mode Alternar modo de construção @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Alternar modo continuo - + Toggles the Continue Mode for next commands. Alterna o modo de continuar para os comandos seguintes. @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Alternar Modo de Visualização - + Swaps display mode of selected objects between wireframe and flatlines Muda o modo de visualização dos objetos selecionados entre "wireframe" e as linhas ocultas @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Alternar Grelha - + Toggles the Draft grid on/off Liga ou desliga a grelha do módulo Draft - + Grid Grelha - + Toggles the Draft grid On/Off Ativa/desativa a grelha de desenho @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex aparar_extender - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Apara ou estende o objeto selecionado ou extruda faces. CTRL para conectar, SHIFT restringe ao segmento atual ou perpendicular, ALT inverte a direção @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Anular Últ. Segm. - + Undoes the last drawn segment of the line being drawn Desfaz o último segmento desenhado da linha que se está a desenhar @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Promover - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Junta os objetos selecionados num, ou converte traços fechados em faces preenchidas, ou une faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adiciona um VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Cria um DraftWire de vários pontos (DWire). CTRL para fazer snap, SHIFT para restringir + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Traço para B-Spline - + Converts between Wire and B-spline Converte entre traços e B-spline @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Configurações gerais do modulo Draft - + This is the default color for objects being drawn while in construction mode. Esta é a cor pré-configurada para objetos sendo desenhados no modo de construção - + This is the default group name for construction geometry Este ;e o nome pré-configurado para o grupo para a geometria de construção - + Construction Construção @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainGuardar a cor atual e a largura da linha entre sessões - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Se essa opção estiver marcada, o modo de cópia será mantido através de comando, caso contrário os comandos sempre iniciarão no modo não-cópia - + Global copy mode Modo de cópia para tudo - + Default working plane Plano de Trabalho Predefinido - + None Nenhum - + XY (Top) XY (Topo) - + XZ (Front) XZ (Frente) - + YZ (Side) YZ (Lado) @@ -1983,12 +2018,12 @@ such as "Arial:Bold" Ajustes Gerais - + Construction group name Nome do grupo de construção - + Tolerance Tolerância @@ -2013,22 +2048,22 @@ such as "Arial:Bold" Aqui, pode indicar uma pasta com os ficheiros SVG, contendo as definições <modelo> que podem ser adicionadas aos modelos de escotilha de projeto standard - + Draft interface mode Modo de interface do rascunho (Draft) - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Este é o modo de interface do utilizador em que o módulo Draft irá trabalhar: O Modo barra de ferramentas coloca todas as configurações do rascunho (Draft) numa barra de ferramentas separada, enquanto o modo Visualização de tarefa utiliza o sistema de interação com o utilizador do FreeCAD - + Toolbar Barra de ferramentas - + Taskview Visualizar tarefa @@ -2058,12 +2093,12 @@ such as "Arial:Bold" Modo Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalmente, após copiar objetos, as cópias ficam selecionadas. Se esta opção estiver marcada, em vez disso os objetos base ficarão selecionados. - + Select base objects after copying Selecione objetos base após copiar @@ -2098,7 +2133,7 @@ such as "Arial:Bold" linhas principais serão desenhados mais grossas. Especifique aqui quantos quadrados entre as linhas principais. - + Internal precision level Nível de precisão interno @@ -2213,12 +2248,12 @@ such as "Arial:Bold" Transformar linhas de cor branca para preto - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Se esta opção estiver marcada, as ferramentas de Draft irão criar primitivas do módulo part em vez de objetos Traço, quando possível. - + Use Part Primitives when available Usar primitivas do módulo part quando disponível @@ -2238,12 +2273,7 @@ such as "Arial:Bold" Snap sempre ativo (desativar tecla de snap) - - Construction geometry - Geometria de construção - - - + Construction geometry color Cor de geometria de construção @@ -2383,7 +2413,7 @@ such as "Arial:Bold" Selecione um ficheiro de tipos - + Fill objects with faces whenever possible Preencher objetos com faces sempre que possível @@ -2673,7 +2703,7 @@ such as "Arial:Bold" Atualização automática (apenas importador antigo) - + Prefix labels of Clones with: Rótulos de Clones com o prefixo: @@ -2710,7 +2740,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Este é o método escolhido para importar a cor de um objeto SVG para o FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Se selecionado, os objetos aparecerão preenchidos por predefinição. Caso contrário, eles serão mostrados como aramado (wireframe) @@ -2790,17 +2820,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Se selecionado, objetos das mesmas camadas serão reunidos em blocos, para agilizar a exibição, mas dificultando a edição - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Se verificado, instruções passo a passo serão exibidas na janela de saída durante a execução de comandos Traço (Draft) - - - - Verbose command line mode - Modo detalhado de linha de comando - - - + When drawing lines, set focus on Length instead of X coordinate Quando desenhar linhas, focar no comprimento em vez da coordenada X @@ -2880,12 +2900,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Segmento de Spline máximo: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2896,694 +2916,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria de construção + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativo + + + + R + R + + + + Continue + Continuar + + + + T + T + + + + Close + Fechar + + + + O + O + + + + Copy + Copiar + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Preenchimento + + + + L + L + + + + Exit + Sair + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Comprimento + + + + H + H + + + + Wipe + Limpar + + + + W + W + + + + Set WP + Definir Plano de Trabalho + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restringir X + + + + X + X + + + + Restrict Y + Restringir Y + + + + Y + Y + + + + Restrict Z + Restringir Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Ferramentas de criação Draft - - - - Draft modification tools - Ferramentas de modificação Draft - - - - Utilities - Utilitários - - - - Wire tools - Ferramentas de Linha - - - - Snapping - Alinhamento e atração (snap) - draft - + not shape found forma não encontrada - + All Shapes must be co-planar Todas a formas devem estar no mesmo plano - + The given object is not planar and cannot be converted into a sketch. O objeto não é planar e não pode ser convertido em esboço (sketch). - + Unable to guess the normal direction of this object Incapaz de predizer a direção normal deste objeto - + Draft Command Bar Barra de comando Draft - + Toggle construction mode Alternar modo de construção - + Current line color Cor de linha atual - + Current face color Cor da face atual - + Current line width Comprimento de linha atual - + Current font size Tamanho do tipo de letra atual - + Apply to selected objects Aplicar aos Objet. Selec. - + Autogroup off Autoagrupar desactivado - + active command: Comando ativo: - + None Nenhum - + Active Draft command comando Desenhar ativado - + X coordinate of next point Coordenada X do Próximo Ponto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y do Próximo Ponto - + Z coordinate of next point Coordenada Z do Próximo Ponto - + Enter point Inserir ponto - + Enter a new point with the given coordinates Insirir um novo ponto com pelas coordenadas - + Length Comprimento - + Angle Ângulo - + Length of current segment Comprimento do segmento atual - + Angle of current segment Ângulo do segmento atual - + Radius Raio - + Radius of Circle Raio do Círculo - + If checked, command will not finish until you press the command button again Se marcado, o comando não irá terminar até que clique novamente no botão de comando - + If checked, an OCC-style offset will be performed instead of the classic offset Se selecionado, um deslocamento ao estilo OCC será executado em vez do deslocamento clássico - + &OCC-style offset &Deslocamento estilo OCC - + Add points to the current object Adicionar pontos ao objeto atual - + Remove points from the current object Remover pontos do objeto atual - + Make Bezier node sharp Tornar nó Bezier afiado - + Make Bezier node tangent Tornar nó Bezier tangente - + Make Bezier node symmetric Tornar nó Bezier simétrico - + Sides Lados - + Number of sides Nr. de Lados - + Offset Deslocamento paralelo - + XY (top) XY (topo) - - Select XY plane - Selecionar o Plano XY - - - + XZ (front) XZ (frente) - - Select XZ plane - Selecionar o Plano XZ - - - + YZ (side) YZ (lado) - - Select YZ plane - Selecionar o Plano YZ - - - + View Vista - - Select plane perpendicular to the current view - Selecionar o plano perpendicular à vista atual - - - + Auto Auto - - Do not project points to a drawing plane - Não projectar pontos para um plano de desenho - - - + Text string to draw Cadeia de caracteres de texto a desenhar - + String Texto - + Height of text Altura do texto - + Height Altura - + Intercharacter spacing Espaçamento entre caráteres - + Tracking Monitorização - + Full path to font file: Caminho completo para o arquivo de fonte: - + Open a FileChooser for font file Abrir um diálogo para escolher um arquivo de fonte - + Grid spacing Espaçamento da grelha - + The spacing between the grid lines O espaçamento entre as linhas da grelha - + Main line every Linha principal a cada - + The number of lines between main lines O número de linhas entre as linhas principais - + Center plane on view Centrar plano de trabalho - - Select Plane - Selec. Plano - - - + Line Linha - + DWire DWire - + Circle Círculo - + Center X Centrar X - + Arc Arco - + Point Ponto - + Label Rótulo - + Distance Distância - + Trim Aparar - + Pick Object Escolha objeto - + Edit Editar - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Valor de Tamanho inválido. Usando 200,0. - + Invalid Tracking value. Using 0. Rastreamento inválido. Usando 0. - + Please enter a text string. Por favor, insira um texto. - + Select a Font file Selecione um ficheiro de tipos - + Please enter a font file. Por favor, insira um arquivo de fonte. - + Autogroup: Autoagrupar: - + Faces Faces - + Remove Remover - + Add Adicionar - + Facebinder elements Elementos Película (facebinder) - + Create Line Criar linha - - Pick next point: - - Sel. ponto seguinte: - - - + Convert to Wire Converter em traços - + BSpline BSpline - + BezCurve Curva de Bezier - + Create BezCurve Criar CurvaBez - + Rectangle Retângulo - + Create Plane Criar plano - + Create Rectangle Criar retângulo - + Create Circle Criar círculo - + Create Arc Criar Arco - + Start Angle Ângulo de início - + Aperture Abertura - + Polygon Polígono - + Create Polygon Criar polígono - + Ellipse Elipse - + Create Ellipse Criar elipse - + Text Texto - + Create Text Criar texto - + Dimension Cotagem - + Create Dimension Criar cota - + ShapeString FormaString - + Create ShapeString Criar FormaString - + Copy Copiar - + Move Mover - + Change Style Alterar Estilo - + Rotate Rodar - - Cannot offset this object type - - Não consegue criar um deslocamento (offset) deste tipo de objecto - - - - + Stretch Esticar - + Upgrade Promover - + Downgrade Despromover - + Selection is not a Knot A seleção não é um nó - + Convert to Sketch Converter para esboço (Sketch) - + Convert to Draft Converter para traço (Draft) - + Convert Converter - + Array Matriz - + Create Point Criar Ponto - + Mirror Espelho (simetria) - + &Draft &Traço (Draft) @@ -3603,179 +3770,179 @@ To enabled FreeCAD to download these libraries, answer Yes. Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. - + Draft.makeBSpline: not enough points Draft.makeBSpline: não há pontos suficientes - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Pontos de extremidade iguais, fecho forçado - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Lista de pontos inválida - + No object given Nenhum objeto dado - + The two points are coincident Os dois pontos são coincidentes - + Found groups: closing each open object inside Encontrei grupos: fechando cada objeto aberto contido - + Found mesh(es): turning into Part shapes Encontrada(s) malha(s): transformando em formas de Peça - + Found 1 solidifiable object: solidifying it Encontrado 1 objeto solidificável: solidificando-o - + Found 2 objects: fusing them 2 objetos encontrados: fundindo-os - + Found several objects: creating a shell Vários objetos encontrados: criando casca (shell) - + Found several coplanar objects or faces: creating one face Vários objetos ou faces complanares encontrados: Será criada uma face - + Found 1 non-parametric objects: draftifying it Encontrado 1 objeto não-paramétrico: draftifying it - + Found 1 closed sketch object: creating a face from it 1 esboço fechado (sketch) encontrado: será criada uma face - + Found 1 linear object: converting to line 1 objeto linear encontrado: será criada uma linha - + Found closed wires: creating faces Linhas fechadas (wires) encontradas: serão criadas faces - + Found 1 open wire: closing it Encontrado 1 traço aberto: fechando-o - + Found several open wires: joining them Vários traços abertos encontrados: unindo-os - + Found several edges: wiring them Várias arestas encontradas: irão ser criados traços (wires) - + Found several non-treatable objects: creating compound Vários objetos não tratáveis encontrados: criando composto (compound) - + Unable to upgrade these objects. Não é possível promover estes objetos. - + Found 1 block: exploding it Um bloco encontrado: Explodindo-o - + Found 1 multi-solids compound: exploding it Encontrado 1 composto multi-sólidos: explodindo-o - + Found 1 parametric object: breaking its dependencies Encontrado 1 objeto paramétrico: quebrando suas dependências - + Found 2 objects: subtracting them Escontrados 2 objeto: Subtraindo-os - + Found several faces: splitting them Encontradas várias faces: separando-as - + Found several objects: subtracting them from the first one Encontrados vários objetos: subtraindo-os ao primeiro - + Found 1 face: extracting its wires Encontrada 1 face: extraindo os seus traços - + Found only wires: extracting their edges Encontrados apenas Traços: extraindo as suas arestas - + No more downgrade possible Não existem mais despromoções possíveis - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: fechado com o mesmo primeiro/último Ponto. Geometria não atualizada. - + No point found Nenhum ponto encontrado - + ShapeString: string has no wires ShapeString: O texto não contém traços - + Relative Relativo - + Continue Continuar - + Close Fechar @@ -3820,7 +3987,7 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Restringir Z - + Select edge Selecionar aresta @@ -3835,7 +4002,7 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Modo comprimento - + Wipe Limpar @@ -3850,454 +4017,279 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Alterna Alinhamento e atração (snap) do objeto - + Check this to lock the current angle Marcar para bloquear o ângulo atual - + Coordinates relative to last point or absolute Coordenadas relativas ao último ponto ou absolutas - + Filled Preenchido - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Marcar para o objeto aparecer preenchido, caso contrário ele será mostrado como aramado (wireframe) - - - + Finish Terminar - + Finishes the current drawing or editing operation Termina o desenho atual ou a operação de edição - + &Undo (CTRL+Z) &Desfazer (CTRL+Z) - + Undo the last segment Desfazer o último segmento - + Finishes and closes the current line Termina e fecha a linha atual - + Wipes the existing segments of this line and starts again from the last point Limpa os segmentos existentes desta linha e começa novamente a partir do último ponto - + Set WP Definir Plano de Trabalho - + Reorients the working plane on the last segment Reorienta o plano de trabalho para o último segmento - + Selects an existing edge to be measured by this dimension Seleciona uma aresta existente a ser medida por esta cotagem - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Se marcado, os objetos serão copiados em vez de movidos. Preferências-> Traço-> Modo de cópia Global para manter este modo nos comandos seguintes - - options - opções - - - + Default Predefinição - + Pick a face to define the drawing plane Escolher uma face para definir o plano de desenho - - First point: - Primeiro ponto: - - - - Closing - Fechando - - - + Create Wire Criar traço - - Removing last point - Removendo o último ponto - - - - Next point: - Ponto seguinte: - - - - Restarting from - Reiniciando desde - - - + Unable to create a Wire from selected objects Não é possível criar um traço dos objetos selecionados - + Spline has been closed Spline foi fechada - + Last point has been removed O último ponto foi removido - - Pick next point, or Finish (shift-F) or close (o): - Escolher o próximo ponto, ou finalizar (shift-F) ou fechar (o): - - - + Create B-spline Criar B-spline - + Bezier curve has been closed Curva de Bezier foi fechada - - Pick first point: - Escolher primeiro ponto: - - - - Pick opposite point: - Escolher ponto oposto: - - - - Pick center point: - Escolhe centro: - - - - Pick radius: - Escolher raio: - - - - Pick start angle: - Escolher ângulo inicial: - - - - Pick aperture: - Escolher abertura: - - - - Aperture angle: - Ângulo de Abertura: - - - - Pick location point: - Escolha o ponto de localização: - - - + Edges don't intersect! As aresta não se intercetam! - + Pick ShapeString location point: Escolher ponto de localização da Shapestring: - + Select an object to move Selecione um objeto para mover - - Pick start point: - Escolher ponto de origem: - - - - Pick end point: - Escolher o ponto de extremidade: - - - + Select an object to rotate Selecione um objeto a ser rodado - - Pick rotation center: - Escolha o centro de rotação: - - - - Pick base angle: - Escolha o ângulo de referência: - - - - Pick rotation angle: - Escolha o ângulo de rotação: - - - + Select an object to offset Selecionar objeto para deslocamento paralelo - + Offset only works on one object at a time Deslocamento paralelo só funciona com um objeto de cada vez - + Sorry, offset of Bezier curves is currently still not supported Desculpe, o deslocamento (offset) de curvas Bézier não é suportado no momento - - Pick distance: - Escolha a distância: - - - + Select an object to stretch Selecione um objeto para esticar - - Pick first point of selection rectangle: - Escolha o primeiro ponto do retângulo de seleção: - - - - Pick opposite point of selection rectangle: - Escolha o ponto oposto do retângulo de seleção: - - - - Pick start point of displacement: - Escolha o ponto inicial do deslocamento: - - - - Pick end point of displacement: - Escolha o ponto final do deslocamento: - - - + Turning one Rectangle into a Wire Transformando um retângulo em traço - + Select an object to join Selecione um objeto para juntar - + Join Juntar - + Select an object to split Selecione um objeto para separar - + Select an object to upgrade Selecione um objeto para promover - + Select object(s) to trim/extend Selecione objetos para aparar/estender (trim/extend) - + Unable to trim these objects, only Draft wires and arcs are supported Incapaz de cortar estes objetos, apenas os traços e arcos (Draft wires) são suportados - + Unable to trim these objects, too many wires Incapaz de cortar estes objetos, demasiados traços (wires) - + These objects don't intersect Estes objetos não se intersetam - + Too many intersection points Demasiados pontos de interseção - + Select an object to scale Selecione um objeto para escalar - - Pick base point: - Escolha o ponto de referência: - - - - Pick reference distance from base point: - Escolha a distância ao ponto de referência: - - - - Pick new distance from base point: - Escolha a nova distância ao ponto de referência: - - - + Select an object to project Selecione um objeto a projetar - - This object type is not editable - Este tipo de objeto não é editável - - - + Please select only one object Por favor selecione um só objeto - + Select a Draft object to edit Selecione um objeto de traço para editar - + Active object must have more than two points/nodes O objeto ativo deve ter mais de dois pontos/nós - + Endpoint of BezCurve can't be smoothed Ponto de extremidade final de BezCurve não pode ser suavizado - + Select an object to convert Selecione um objeto para converter - + Select an object to array Selecione um objeto para criar matriz - + Please select base and path objects Por favor selecione objetos base e trajetória - + Please select base and pointlist objects Por favor selecione objetos de base e lista de pontos - + Select an object to clone Selecione objeto a clonar - + Select face(s) on existing object(s) Selecione face(s) em objeto(s) existente(s) - + Select an object to mirror Selecione um objeto a ser espelhado - - Pick start point of mirror line: - Escolha o ponto inicial da linha de simetria: - - - - Pick end point of mirror line: - Escolha o ponto final da linha de simetria: - - - + This tool only works with Wires and Lines Esta ferramenta só funciona com traços e Linhas - - - Pick target point: - Escolha o ponto de destino: - - - - Pick endpoint of leader line: - Escolha o ponto final da linha de chamada: - - - - Pick text position: - Escolha a posição do texto: - ODA (formerly Teigha) File Converter not found, DWG support is disabled Conversor de Ficheiro ODA (anteriormente Teigha) não encontrado, suporte para DWG está desativado - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4307,56 +4299,354 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Escala - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Topo + + + + Front + Frente + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automática + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotação + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Calado do Navio + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitários + + + + Wire tools + Ferramentas de Linha + + + + Snapping + Alinhamento e atração (snap) + diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index d9ca6e32d0..e84b5e927c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 522bca0683..c1f319714f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definește un model de hașură - + Sets the size of the pattern Definește mărimea motivului - + Startpoint of dimension Punct de plecare al dimensiunii - + Endpoint of dimension Punct final al dimensiunii - + Point through which the dimension line passes Punctul prin care trece linia de cota - + The object measured by this dimension Obiect măsurat prin această dimensiune - + The geometry this dimension is linked to Geometria la care această dimensiune este legată - + The measurement of this dimension Măsura acestei dimensiuni - + For arc/circle measurements, false = radius, true = diameter Pentru măsurători de arc/cerc, false = raza, true = diametrul - + Font size Dimensiunea fontului - + The number of decimals to show Numărul de zecimale de arătat - + Arrow size Dimensiunea săgeții - + The spacing between the text and the dimension line Distanţa dintre text şi linia de dimensiune - + Arrow type Tipul de săgeată - + Font name Nume font - + Line width Latimea liniei - + Line color Culoarea liniei - + Length of the extension lines Lungimea liniilor de extensie - + Rotate the dimension arrows 180 degrees Roti săgeţile de dimensiune cu 180 de grade - + Rotate the dimension text 180 degrees Rotire text dimensiune cu 180 de grade - + Show the unit suffix Arată sufixul unității folosite - + The position of the text. Leave (0,0,0) for automatic position Poziția textului. Păstrați (0,0,0) pentru poziționare automata - + Text override. Use $dim to insert the dimension length Suprascrie textul. Folosi $dim pentru a introduce lungimea de dimensiune - + A unit to express the measurement. Leave blank for system default O unitate pentru a exprima unitatea de măsurare. Lăsați-o necompletată pentru sistemul implicit - + Start angle of the dimension Unghiul de început a dimensiunii - + End angle of the dimension Unghi de final a dimensiunii - + The center point of this dimension Punctul central al această dimensiune - + The normal direction of this dimension Întoarce direcția normală a unei dimensiuni - + Text override. Use 'dim' to insert the dimension length Suprascrie textul. Folosi 'dim' pentru a introduce lungimea de dimensiune - + Length of the rectangle Lungimea dreptunghiului - + Radius to use to fillet the corners Raza de utilizat pentru a rotunji colţurile - + Size of the chamfer to give to the corners Dimensiunea chamfer să dea la colturi - + Create a face Creaţi-o-față - + Defines a texture image (overrides hatch patterns) Definește un model de textură (schimbă modelul de hașură) - + Start angle of the arc Unghiul de start al arcului - + End angle of the arc (for a full circle, give it same value as First Angle) Unghiul final al arcului (pentru un cerc complet, dati-i aceeaşi valoarea ca unghiului de început) - + Radius of the circle Raza cercului - + The minor radius of the ellipse Raza minoră a elipsei - + The major radius of the ellipse Raza majoră a elipsei - + The vertices of the wire Les sommets du fil - + If the wire is closed or not În cazul în care B-spline este închis sau nu - + The start point of this line Punctul de pornire al acestei linii - + The end point of this line Punctul final al acestei linii - + The length of this line Lungimea acestei linii - + Create a face if this object is closed Creaţi o față dacă acest obiect este închis - + The number of subdivisions of each edge Numărul subdiviziunilor din fiecare margine - + Number of faces Numărul de feţe - + Radius of the control circle Raza cercului de control - + How the polygon must be drawn from the control circle Cum poligonului trebuie desenat pornind de la cercul de control - + Projection direction Direcţia de proiecţie - + The width of the lines inside this object Lăţimea de linii în interiorul acestui obiect - + The size of the texts inside this object Dimensiunea textelor în interiorul acestui obiect - + The spacing between lines of text Spaţierea dintre liniile de text - + The color of the projected objects Culoarea obiectelor proiectate - + The linked object Obiectul corelat - + Shape Fill Style Stil de umplere a formei - + Line Style Stilul de linie - + If checked, source objects are displayed regardless of being visible in the 3D model În cazul în care bifat, sursa de obiecte sunt afişată indiferent dacă sunt vizibile sau nu în modelul 3D - + Create a face if this spline is closed Creaţi o fațetă dacă acest obiect (line b-spline) este închis(ă) - + Parameterization factor Factor de parametrizare - + The points of the Bezier curve Punctele curbei Bézier - + The degree of the Bezier function Gradul funcției Bézier - + Continuity Continuitate - + If the Bezier curve should be closed or not Dacă curba Bézier ar trebui să fie închisă sau deschisă - + Create a face if this curve is closed Creaţi o fațetă dacă această curbă este închisă - + The components of this block Componentele acestui bloc - + The base object this 2D view must represent Obiectul de bază pe care această vedere 2 D trebuie să o prezinte - + The projection vector of this object Vectorul de proiecție al acestui obiect - + The way the viewed object must be projected Modul în care obiectul văzut trebuie să se proiecteze - + The indices of the faces to be projected in Individual Faces mode Indicii fețelor care urmează să fie proiectate în modul Fețe individuale - + Show hidden lines Afișează liniile ascunse - + The base object that must be duplicated Obiectul de bază care trebuie multiplicat - + The type of array to create Tipul de matrice creeat - + The axis direction Direcția axei - + Number of copies in X direction Numărul de copii pe direcția X - + Number of copies in Y direction Numărul de copii pe direcția Y - + Number of copies in Z direction Numărul de copii pe direcția Z - + Number of copies Numărul de copii - + Distance and orientation of intervals in X direction Distanța și orientarea intervalelor pe direcția X - + Distance and orientation of intervals in Y direction Distanța și intervalele pe direcția Y - + Distance and orientation of intervals in Z direction Distanța și orientarea intervalelor pe direcția Z - + Distance and orientation of intervals in Axis direction Distanța și orientarea intervalelor pe direcția axei - + Center point Punctul central - + Angle to cover with copies Unghiul de acoperit cu copii - + Specifies if copies must be fused (slower) Specificați dacă copiile trebuie să fuzioneze (proces mai lent) - + The path object along which to distribute objects Traiectoria după care se distribuie aceste obiecte - + Selected subobjects (edges) of PathObj Soub-obiecte sélectionate (edges) ale PathObj - + Optional translation vector Vector opțional de translație - + Orientation of Base along path Orientarea Bazei de-a lungul traiectoriei - + X Location Localizarea pe X - + Y Location Localizarea pe Y - + Z Location Localizarea pe Z - + Text string Şir tip text - + Font file name Numele fișierului de fonturi - + Height of text Înălțimea textului - + Inter-character spacing Spațiul dintre caractere - + Linked faces Faces liées - + Specifies if splitter lines must be removed Specificați dacă liniile secante trebuie șterse - + An optional extrusion value to be applied to all faces O valoare opțională de extrudere se aplică la toate fațetele - + Height of the rectangle Înălţimea dreptunghiului - + Horizontal subdivisions of this rectangle Subdiviziunile orizontale de acest dreptunghi - + Vertical subdivisions of this rectangle Subdiviziunile verticale de acest dreptunghi - + The placement of this object Amplasarea acestui obiect - + The display length of this section plane Lungimea vederii de afișare al acestui plan de secționare - + The size of the arrows of this section plane Dimensiunea săgeţilor acestui plan de secțiune - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Pentru modurile de Cutlines şi Cutfaces, acest lucru lasă rezultatul la locul de tăiere - + The base object is the wire, it's formed from 2 objects Obiectul de baza este firul, este format din 2 obiecte - + The tool object is the wire, it's formed from 2 objects Obiect instrument este firul, este format din 2 obiecte - + The length of the straight segment Lungimea segmentului de dreaptă - + The point indicated by this label Punctul indicat de această etichetă - + The points defining the label polyline Punctele definind eticheta poliliniei - + The direction of the straight segment Direcţia de segment de dreaptă - + The type of information shown by this label Tipul de informaţie indicat de această etichetă - + The target object of this label Obiectivul ţintă această etichetă - + The text to display when type is set to custom Text de afișat atunci când tipul este setat la particularizat - + The text displayed by this label Textul afişat de această etichetă - + The size of the text Dimensiunea textului - + The font of the text Fontul textului - + The size of the arrow Dimensiunea săgeții - + The vertical alignment of the text Aliniere verticală a textului - + The type of arrow of this label Tipul de săgeată din această etichetă - + The type of frame around the text of this object Tipul de cadru în jurul textul de la acest obiect - + Text color Culoarea textului - + The maximum number of characters on each line of the text box Numărul maxim de caractere pe fiecare linie din caseta de text - + The distance the dimension line is extended past the extension lines Distanța liniei de dimensiune se extinde peste liniile de prelungire - + Length of the extension line above the dimension line Lungimea liniei de extensie deasupra liniei de dimensiune - + The points of the B-spline Punctele de B-spline - + If the B-spline is closed or not În cazul în care B-spline este închis sau nu - + Tessellate Ellipses and B-splines into line segments Tessellate elipselor şi B-spline în segmente de linie - + Length of line segments if tessellating Ellipses or B-splines into line segments Lungimea segmentelor de linie dacă aproximarea elipselor sau curbelor B-spline prin segmente de linie - + If this is True, this object will be recomputed only if it is visible În cazul în care acest lucru este adevărat, acest obiect va fi recalculat numai în cazul în care este vizibil - + Base Bază - + PointList List[ de puncte - + Count Numar - + The objects included in this clone Obiectele incluse în această clona - + The scale factor of this clone Factorul de scară la această clonă - + If this clones several objects, this specifies if the result is a fusion or a compound Dacă această clonează mai multe obiedcte, această opțiune indică rezultatul unei fuziuni sau compuneri - + This specifies if the shapes sew Aceasta specifică dacă formele sunt croite - + Display a leader line or not Afișați indicații sau nu - + The text displayed by this object Textul afişat de acest obiect - + Line spacing (relative to font size) Interlinia (relativ la dimensiunea fontului) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Pantă - + Scale Scalare - + Writing camera position Scrie poziţia camerei - + Writing objects shown/hidden state Scrie starea obiectului vizibil/ascuns - + X factor Factor de X - + Y factor Factor de Y - + Z factor Factor de Z - + Uniform scaling Scalare uniformă - + Working plane orientation Orientarea de planul de lucru @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager Descarcarea bibliotecii dxf a eșuat. Vă rugăm să instalaţi addon biblioteca dxf manual din meniul Tools-> Addon Manager - + This Wire is already flat Acest fir este deja plat - + Pick from/to points Alege la puncte - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Panta de dat firelor/liniilor selectate, selectat fire/linii: 0 = orizontală, 1 = 45deg în sus, -1 = 45deg în jos + + + Create a clone + Creaţi o clona + DraftShapeStringGui @@ -860,12 +900,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Adăugaţi la grupul de Constructii - + Adds the selected objects to the Construction group Adaugă obiectele selectate la grupul de Constructii @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Adaugă punct - + Adds a point to an existing Wire or B-spline Adaugă un punct la un fir sau B-spline existentă @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Mutare la grup... - + Moves the selected object(s) to an existing group Adaugă obiectul(ele) selectat(e) la un grup existent @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Aplică stilul curent - + Applies current line width and color to selected objects Aplică lăţimea și culoarea liniei curente pentru obiectele selectate @@ -912,12 +952,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Arc - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -925,7 +965,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -933,12 +973,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -946,12 +986,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Matrice - + Creates a polar or rectangular array from a selected object Creează o matrice polară (de rotație) sau dreptunghiulară din obiectele selectate @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Sélectionați un grup pentru a adăuga automat toate obiectele Draft & Arch @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creaza o polilinie b -spline/ Bezier. CTRL pentru a ancora, SHIFT pentru a constrange @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Curbă bezier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creează o curbă Bezier. CTRL pentru a ancora, SHIFT pentru a constrânge @@ -998,7 +1038,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1006,12 +1046,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Cerc - + Creates a circle. CTRL to snap, ALT to select tangent objects Creează un cerc. CTRL pentru ancorare, ALT pentru selectare obiecte tangente @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Clonă - + Clones the selected object(s) Clonează obiectul(ele) selectate @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Închide linia - + Closes the line being drawn Închide linia în curs de elaborare @@ -1045,12 +1085,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1060,12 +1100,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Eliminare punct - + Removes a point from an existing Wire or B-spline Elimina un punct dintr-o polilinie/curba @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensiune - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Creează o dimensiune. CTRL pentru ancorare, SHIFT pentru constrângere, ALT pentru selectare segment @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Downgrade - + Explodes the selected objects into simpler objects, or subtracts faces Explodează obiectele selectate în simple obiecte, sau scade feţele @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Ciorna in schita - + Convert bidirectionally between Draft and Sketch objects Conversie bidirectionala a obiectelor intre ciorna si schita @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Desen - + Puts the selected objects on a Drawing sheet Pune obiectele selectate într-o foaie de desen @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Editare - + Edits the active object Editează obiectul activ @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Crează o elipsă. CTRL pentru a ancora @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creează un obiect facebinder de la feţele selectate @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Linia de sosire - + Finishes a line without closing it Termină o linie fără a o închide @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inversează direcția cotei - + Flip the normal direction of a dimension Inversează direcția normală a unei dimensiuni @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Repară - + Heal faulty Draft objects saved from an earlier FreeCAD version Repară obiectele ciornă/draft defecte salvate din o versiune mai veche de FreeCAD @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Etichetă - + Creates a label, optionally attached to a selected object or element Creează o etichetă, opţional ataşată la un obiect selectat sau un element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linie - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Creează o linie din 2 puncte. CTRL pentru ancorare, SHIFT pentru constrângere @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Oglindă - + Mirrors the selected objects along a line defined by two points Oglindirea obiectelor selectate de-a lungul unei linii definite prin două puncte @@ -1273,12 +1321,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mută - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1286,12 +1334,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Compensare - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Compensează obiectul activ. CTRL la ancorare, SHIFT pentru constrângere, ALT pentru a copia @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray (cale pentru o serie de forme) - + Creates copies of a selected object along a selected path. Creează copii ale unui obiect selectat de-a lungul unui traseu selectat. @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punct - + Creates a point object Creează un obiect punct @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Matrice de puncte - + Creates copies of a selected object on the position of points. Creează copii ale unui obiect selectat pe poziţia punctelor. @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Poligon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Creează un poligon regulat. CTRL pentru a fixa, SHIFT pentru a limita @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Dreptunghi - + Creates a 2-point rectangle. CTRL to snap Creează un dreptunghi din 2 puncte. CTRL pentru a ancora @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rotire - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roteşte obiectele selectate. CTRL pentru ancorare, SHIFT pentru constrângere, ALT creează copie @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Scalare - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Scalează obiectele selectate de la un punct de bază. CTRL pentru ancorare, SHIFT pentru constrângere, ALT pentru a copia @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Selectați un grup - + Selects all objects with the same parents as this group Selectează toate obiectele cu aceeaşi părinţii ca acest grup @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Selecție plan - + Select a working plane for geometry creation Selectare plan de lucru pentru creare unui obiect geometric @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creează un obiect proxy din planul de lucru curent - + Create Working Plane Proxy Crearea Proxy planului de lucru @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Vizualizare forma 2D - + Creates Shape 2D views of selected objects Creaza vizualizari forma 2D pentru obiectele selectate @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma din text... - + Creates text string in shapes. Creează şir text în forme. @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Arata bara de ancore - + Shows Draft snap toolbar Arata bara de ancore pentru ciorna @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Setaţi panta - + Sets the slope of a selected Line or Wire Stabileşte panta liniei selectate sau firului/sârmei @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Unghiuri - + Snaps to 45 and 90 degrees points on arcs and circles Se ancorează la punctele de la 45 și 90 de grade pe un arc de cerc @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centru - + Snaps to center of circles and arcs Se ancorează pe centrul cercului și pe arce @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensiuni - + Shows temporary dimensions when snapping to Arch objects Arată dimensiunile temporare când se ancorează la obiecte arc @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punct final - + Snaps to endpoints of edges Se ancorează la capetele marginilor @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensie - + Snaps to extension of edges Se ancorează pe extensia marginilor @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Grilă - + Snaps to grid points Se fancorează pe punctele grilei @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersecţie - + Snaps to edges intersections Se ancorează pe marginile intersecțiilor @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Activează/dezactivează - + Activates/deactivates all snap tools at once Activează/dezactivează toate instrumentele de ancorare odată - + Lock Zăvorăște @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punct mijlociu - + Snaps to midpoints of edges Se ancorează pe mijlocul marginii @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Cel mai apropiat - + Snaps to nearest point on edges Se fixează la extremitățile marginilor @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortogonal - + Snaps to orthogonal and 45 degrees directions Se fixează la ortogonale şi la 45 de grade în direcţii @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paralel - + Snaps to parallel directions of edges Se ancorează la direcţiile paralele cu marginile @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Se ancorează pe punctele perpendiculare pe margini @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Se ancorează pe locaţii speciale ale obiectelor @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Plan de lucru - + Restricts the snapped point to the current working plane Limiteză punctul de ancorare în planul de lucru actual @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Divizare - + Splits a wire into two wires Splits a wire into two wires @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Întinde obiectele selecționate @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Creează o notă. CTRL pentru a ancora @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Activează/dezactivează Modul de Construcţie pentru obiectele următoare. - + Toggle Construction Mode Activează/dezactivează Modul de Construcție @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Activează/dezactivează modul continuu - + Toggles the Continue Mode for next commands. Activează/dezactivează modul continuu pentru urmatoarea comanda. @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Activează/dezactivează mod de afişare - + Swaps display mode of selected objects between wireframe and flatlines Activează/dezactivează modul de afişare a obiectelor selectate între wireframe şi linii bidimensionale @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Activează/dezactivează grila - + Toggles the Draft grid on/off Activează/dezactivează grila pentru modul ciorna - + Grid Grilă - + Toggles the Draft grid On/Off Activează/dezactivează grila pentru modul ciorna @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Taie sau extinde obiectele selectate sau extrudeaza o fateta. CTRL activeaza ancorele, SHIFT adauga segmentul sau normala, ALT inverseaza @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Anulare ultimul segment - + Undoes the last drawn segment of the line being drawn Anulează ultimul segment al liniei în curs de elaborare @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Se alătură obiectele selectate într-unul singur, converteşte fire închis umplut fațete sau uneşte faţete - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adaugă o VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Creaza o polililinie (DWire). CTRL activeaza ancorele, SHIFT constrange + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Polilinie spsre curba b-spline - + Converts between Wire and B-spline Converteste un obiect din polilinie in curba @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Setări generale proiect - + This is the default color for objects being drawn while in construction mode. Aceasta este culoarea implicită pentru obiecte în curs de elaborare în Modul de Construcţie. - + This is the default group name for construction geometry Acesta este numele implicit al grupurilor pentru geometria de construcţie - + Construction Construcţie @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSalveaza culoarea si grosimea liniei curente intre sesiuni - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Dacă casuţa este bifată, modul de copiere se păstrează pentru toate comenzile, altfel comenzile vor începe întotdeauna în modul fără copiere - + Global copy mode Modul de copiere global - + Default working plane Planul de lucru implicit - + None Niciunul - + XY (Top) XY (sus) - + XZ (Front) XZ (faţă) - + YZ (Side) YZ (lateral) @@ -1985,12 +2020,12 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Setări generale - + Construction group name Nume de grup constructii - + Tolerance Toleranţă @@ -2015,22 +2050,22 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Aici puteti specifica un director care contine fisiere SVG cu definitii de sabloane - <pattern> - care pot fi adaugate la modele standard - + Draft interface mode Modul de interfacta ciorna - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Variante de interfata pentru modulul Ciorna: toolbar - amplaseaza toate comenzile pentru Ciorna intr-un toolbar separat; taskbar - foloseste panoul Taskview pentru interactiunea cu utilizatorul - + Toolbar Bara de instrumente - + Taskview Taskview @@ -2060,12 +2095,12 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Mod Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. În mod normal, după copierea unui obiect, copiile obţinute vor fi selectate. Dacă această opţiune este bifată, obiectele de bază vor fi selectate în schimb. - + Select base objects after copying Selectează obiectele de bază după copiere @@ -2100,7 +2135,7 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Liniile principale vor fi trasate îngroşat. Specificaţi aici cate pătrăţele sunt între liniile principale. - + Internal precision level Nivel de precizie internă @@ -2215,12 +2250,12 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Converteste alb in negru - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Atunci când este bifatt, Instrumentele Draft vor crea Part Primitives în loc de obiecte Draft, atunci când sunt disponibile. - + Use Part Primitives when available Utilizare Part primitives când sunt disponibile @@ -2240,12 +2275,7 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Aliniază întotdeauna (dezactivare mod aliniere) - - Construction geometry - Geometria constructiei - - - + Construction geometry color Culoare de geometrie constructii @@ -2385,7 +2415,7 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Selectați un fișier font - + Fill objects with faces whenever possible Remplir des objets avec des faces si possible @@ -2676,7 +2706,7 @@ Altfel vor fi aplicate culorile implicite. Actualizare automată ( numai pentru importatorul vechi) - + Prefix labels of Clones with: Prefixați etichetele de clone cu: @@ -2713,7 +2743,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Aceasta este metoda aleasa pentru importul culorilor obiectului SVG in FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Dacă această căsuţă este bifată, obiecte vor apărea umplute implicit. Altfel, ele vor apărea ca obiecte wireframe @@ -2793,17 +2823,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Dacă bifaţi căsuţa obiectele de pe acelaşi strat vor fi unite în Blocuri de Schiţe, făcând afişarea lor mai rapidă dar editarea lor ulterioară devine mai complicată - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - În cazul în care acest lucru este bifat, instrucţiuni pas cu pas vor fi afişate în fereastra de ieşire atunci când execută comenzi Draft - - - - Verbose command line mode - Mod linie de comandă detaliată - - - + When drawing lines, set focus on Length instead of X coordinate În timpul desenului liniilor, puneți accent pe lungime în loc de coordonatele X @@ -2883,12 +2903,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Lungime maxima a segmentului de polilinie: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2899,693 +2919,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria construcției + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativ + + + + R + R + + + + Continue + Continua + + + + T + T + + + + Close + Închide + + + + O + O + + + + Copy + Copiere + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Completare + + + + L + L + + + + Exit + Iesire + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Lungime + + + + H + H + + + + Wipe + Șterge + + + + W + W + + + + Set WP + Definește planul de lucru + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Limita X + + + + X + X + + + + Restrict Y + Limita Y + + + + Y + Y + + + + Restrict Z + Limita Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Ancorare masă de desen - - - Draft creation tools - Unelte pentru crearea de ciorne - - - - Draft modification tools - Unelte pentru modificarea ciornelor - - - - Utilities - Utilități - - - - Wire tools - Instrumente pentru polilinii - - - - Snapping - Ancorare - draft - + not shape found nicio formă găsită - + All Shapes must be co-planar Toate formele trebuie să fie coplanare - + The given object is not planar and cannot be converted into a sketch. Obiectul dat nu este plan și nu poate fi convertit în sketch. - + Unable to guess the normal direction of this object Incapable de a évalua directia normală a acestui obiect - + Draft Command Bar Bara de Comandă Schiță - + Toggle construction mode Activează/dezactivează Modul de Construcție - + Current line color Culoarea liniei curente - + Current face color Culoare curentă a fațetei - + Current line width Lățimea linei curente - + Current font size Dimensiunea curentă a fontului - + Apply to selected objects Se aplică la obiectele selectate - + Autogroup off Autogrup dezactivat - + active command: Comanda activă: - + None Niciunul - + Active Draft command Comanda activă proiect - + X coordinate of next point Coordonata X a punctului următor - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordonata Y a punctului următor - + Z coordinate of next point Coordonata Z a punctului următor - + Enter point Introduceți punctul - + Enter a new point with the given coordinates Introduceți un nou punct cu coordonatele date - + Length Lungime - + Angle Unghi - + Length of current segment Lungimea segmentului curent - + Angle of current segment Unghiul segmentului curent - + Radius Raza - + Radius of Circle Raza cercului - + If checked, command will not finish until you press the command button again Dacă bifaţi casuţa, comanda nu se va termina până când nu apăsaţi butonul de comandă din nou - + If checked, an OCC-style offset will be performed instead of the classic offset Daca este bifat, o expandare tip OCC va fi folosita inlocul expandarii clasice - + &OCC-style offset Expandare tip &OCC - + Add points to the current object Adăuga puncte la obiectul curent - + Remove points from the current object Elimina puncte din obiectul curent - + Make Bezier node sharp Fă nodul Bezier ascuțit - + Make Bezier node tangent Fă nodul Bezier tangent - + Make Bezier node symmetric Fă nodul Bezier simetric - + Sides Părți - + Number of sides Numărul de laturi - + Offset Compensare - + XY (top) XY (sus) - - Select XY plane - Selectare plan XY - - - + XZ (front) XZ (în față) - - Select XZ plane - Selectare plan XZ - - - + YZ (side) YZ (lateral) - - Select YZ plane - Selectare plan YZ - - - + View Vizualizare - - Select plane perpendicular to the current view - Selectare plan perpendicular pe vizualizarea curentă - - - + Auto Automat - - Do not project points to a drawing plane - Nu proiectează punctele pe planul desenului - - - + Text string to draw Șir text de desenat - + String Şir - + Height of text Înălțimea textului - + Height Înălţime - + Intercharacter spacing Spațiul dintre caractere - + Tracking Urmărire - + Full path to font file: Calea întreagă la fișierul text: - + Open a FileChooser for font file Deschide un FileChooser pentru fişier de font - + Grid spacing Spaţierea grilei - + The spacing between the grid lines Spaţierea dintre liniile grilei - + Main line every Linii principale la fiecare - + The number of lines between main lines Numărul de linii între liniile principale - + Center plane on view Centrează planul în vedere - - Select Plane - Selectare plan - - - + Line Linie - + DWire DWire - + Circle Cerc - + Center X Centrul X - + Arc Arc - + Point Punct - + Label Etichetă - + Distance Distance - + Trim Taiere - + Pick Object Alege obiect - + Edit Editare - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Valoare dimensiune nevalidă. Utilizați 200.0. - + Invalid Tracking value. Using 0. Valoare dimensiune nevalidă. Utilizați 0. - + Please enter a text string. Introduceți un șir text. - + Select a Font file Selectați un fișier font - + Please enter a font file. Introduceți un fișier font. - + Autogroup: AutoGroup: - + Faces Fete - + Remove Elimină - + Add Adaugă - + Facebinder elements Surfaces liées: éléments - + Create Line Creează o linie - - Pick next point: - - Alege următorul punct: - - - + Convert to Wire Conversia la fir - + BSpline BSpline - + BezCurve Curbă bezier - + Create BezCurve Creează o curbă Bezier - + Rectangle Dreptunghi - + Create Plane Creaţi planul - + Create Rectangle Creează un Dreptunghi - + Create Circle Creează un Cerc - + Create Arc Creează un Arc de cerc - + Start Angle Unghiul de inceput - + Aperture Deschidere - + Polygon Poligon - + Create Polygon Creează un Poligon - + Ellipse Elipsa - + Create Ellipse Creează o elipsă - + Text Text - + Create Text Creează un Text - + Dimension Dimensiune - + Create Dimension Creează Cotă - + ShapeString ShapeString - + Create ShapeString Crea ShapeString - + Copy Copiere - + Move Mută - + Change Style Modifică stilul - + Rotate Rotire - - Cannot offset this object type - - Acest tip de obiect nu poate fi expandat - - - + Stretch Stretch - + Upgrade Upgrade - + Downgrade Downgrade - + Selection is not a Knot Selecția nu este un nod - + Convert to Sketch Convertește la schiță - + Convert to Draft Convertește în Draft - + Convert Converteşte - + Array Matrice - + Create Point Creează un punct - + Mirror Oglindă - + &Draft &Schiţă @@ -3602,179 +3770,179 @@ To enabled FreeCAD to download these libraries, answer Yes. Les bibliothèques d'importation/exportation DXF nécessaires FreeCAD pour manipuler le format DXF ne se trouvaient pas sur ce système. Il vous faut soit activer FreeCAD télécharger ces bibliothèques: plan de travail de charge projet 1 - 2 - Menu Edition > Préférences > Import-Export > DXF > activer les téléchargements ou télécharger ces bibliothèques manuellement, comme expliqué sur https://github.com/yorikvanhavre/Draft-dxf-importer pour FreeCAD activé pour télécharger ces bibliothèques, répondre Oui. - + Draft.makeBSpline: not enough points Draft.makeBSpline: nu sunt suficiente puncte - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: punctele de capăt sunt egale. închidere forțată - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Pointslist nevalidă - + No object given Niciun obiect fournizat - + The two points are coincident Cele două puncte coincid - + Found groups: closing each open object inside S-au găsit grupuri: se închid toate obiectele deschise din grup - + Found mesh(es): turning into Part shapes S-a găsit plase (ochiuri): se transformă în forme ale pieselor - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Am descoperit 2 obiecte: le unesc - + Found several objects: creating a shell Mai multe obiecte găsite: crearea unei carcase - + Found several coplanar objects or faces: creating one face Mai multe obiecte coplanare găsite,: crearea unei fațete - + Found 1 non-parametric objects: draftifying it Am gasit un obiect neparametric; il schitam - + Found 1 closed sketch object: creating a face from it Am gasit un obiect schita inchis; il convertesc in fata - + Found 1 linear object: converting to line 1 obiect linear găsit: convertit în linie - + Found closed wires: creating faces Am gasit polilinie inchisa; construim fațeta - + Found 1 open wire: closing it Am gasit o linie deschisa; o inchid - + Found several open wires: joining them Am gasit mai multe fire; le imbin - + Found several edges: wiring them Am gasit mai multe margini; le transform în fire - + Found several non-treatable objects: creating compound Am găsit mai multe obiecte netratabile; creez complex - + Unable to upgrade these objects. Nu se poat actualiza aceste obiecte. - + Found 1 block: exploding it S-a găsit 1 bloc: să-l explodăm - + Found 1 multi-solids compound: exploding it Un solid multi-composant a fost găsit: separă-l - + Found 1 parametric object: breaking its dependencies Am gasit un obiect parametric fara toate dependentele - + Found 2 objects: subtracting them Am gasit doua obiecte; le substragem - + Found several faces: splitting them Am gasit mai multe fete; le divizam - + Found several objects: subtracting them from the first one Am gasit mai multe obiecte; le substragem din primul - + Found 1 face: extracting its wires Am gasit o fateta; ii extragem liniile - + Found only wires: extracting their edges Am gasit doar linii; le extragem marginile - + No more downgrade possible Imposibil de retrogradat - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometrie: este o curbă închisă având același prim / ultim Punct. Geometria nu a fost actualizată. - + No point found Nici un punct găsit - + ShapeString: string has no wires ShapeString: șirul de caractere nu are nici un fir atașat - + Relative Relativ - + Continue Continua - + Close Închide @@ -3819,7 +3987,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Limita Z - + Select edge Selectează marginea @@ -3834,7 +4002,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Modul longitudinal - + Wipe Șterge @@ -3849,454 +4017,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Bifați asta pentru a bloca unghiul curent - + Coordinates relative to last point or absolute Coordonate relative faţă de ultimul punct sau absolute - + Filled Umplut - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Verifica dacă obiectul ar trebui să apară ca umplut, altfel va apare ca wireframe - - - + Finish Terminare - + Finishes the current drawing or editing operation Termina operatiunea curenta de editare sau desenare - + &Undo (CTRL+Z) & Undo (CTRL + Z) - + Undo the last segment Anulare ultimul segment - + Finishes and closes the current line Termină, şi închide linia curentă - + Wipes the existing segments of this line and starts again from the last point Şterge toate segmentele existente ale acestei linii şi reporneşte de la ultimul punct - + Set WP Definește planul de lucru - + Reorients the working plane on the last segment Reorientează plan de lucru pe ultimul segment - + Selects an existing edge to be measured by this dimension Selectați o margine existentă pentru a fi măsurată de către această dimensiune - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Dacă este bifat, obiectele vor fi copiate în loc de a fi mutate. Preferences -> Draft -> Global copy mode pentru a menţine acest mod în următoarele comenzi - - options - opţiuni - - - + Default Implicit - + Pick a face to define the drawing plane Selectați o fațetă pentru a defini planul de desenare - - First point: - Primul punct: - - - - Closing - Închidere - - - + Create Wire Creare filament - - Removing last point - Eliminarea ultimul punct - - - - Next point: - Următorul punct: - - - - Restarting from - Repornirea de la - - - + Unable to create a Wire from selected objects Imposibil de creat un fir din obiectele selectate - + Spline has been closed Spline a fost închis - + Last point has been removed Ultimul punct a fost eliminat - - Pick next point, or Finish (shift-F) or close (o): - Selectați punctul următor, sau Terminați(Maj-F) sau închideți(o) : - - - + Create B-spline Creează o Bspline - + Bezier curve has been closed Curba Bezier a fost închisă - - Pick first point: - Alege primul punct: - - - - Pick opposite point: - Alege punctul opus: - - - - Pick center point: - Alege punctul central: - - - - Pick radius: - Selectează raza: - - - - Pick start angle: - Selectează unghiul de start: - - - - Pick aperture: - Alege deschiderea: - - - - Aperture angle: - Unghiul de deschidere: - - - - Pick location point: - Alege punctul de locaţie: - - - + Edges don't intersect! Marginile nu se intersectează! - + Pick ShapeString location point: Alege punctul de locaţie ShapeString: - + Select an object to move Selectaţi un obiect pentru a muta - - Pick start point: - Selecționați punctul de plecare: - - - - Pick end point: - Alege punctul final: - - - + Select an object to rotate Selectaţi un obiect pentru a roti - - Pick rotation center: - Alege centrul de rotaţie: - - - - Pick base angle: - Alege unghiul de bază: - - - - Pick rotation angle: - Selectează unghiul de start: - - - + Select an object to offset Selectaţi un obiect pentru a compensa - + Offset only works on one object at a time Offset funcţionează numai pe un singur obiect, la un moment dat - + Sorry, offset of Bezier curves is currently still not supported Ne pare rau, offset de curbe Bezier în prezent încă nu este acceptat - - Pick distance: - Alege distanţa: - - - + Select an object to stretch Selectaţi un obiect să se întindă - - Pick first point of selection rectangle: - Alege primul punct de selecţie al dreptunghiului: - - - - Pick opposite point of selection rectangle: - Alege punct opus de selecţie al dreptunghiului: - - - - Pick start point of displacement: - Alege punctul de pornire al deplasării: - - - - Pick end point of displacement: - Alege punctul final de deplasare: - - - + Turning one Rectangle into a Wire Un dreptunghi de cotitură într-un fir - + Select an object to join Selecteaza un obiect pentru a uni - + Join Join - + Select an object to split Seleceaza un obiect pentru a diviza - + Select an object to upgrade Selectaţi un obiect pentru a face upgrade - + Select object(s) to trim/extend Selectaţi obiectul sau obiectele trim/extinderea - + Unable to trim these objects, only Draft wires and arcs are supported Incapabil să tăiaţi aceste obiecte, doar firele de proiect şi arce sunt acceptate - + Unable to trim these objects, too many wires Incapabil să tăiaţi aceste obiecte, prea multe fire - + These objects don't intersect Aceste obiecte nu se intersectează - + Too many intersection points Prea multe puncte de intersecţie - + Select an object to scale Selectaţi un obiect pentru mărire la scară - - Pick base point: - Selectați punctul țintă: - - - - Pick reference distance from base point: - Alege distanţa de referinţă de la punctul de bază: - - - - Pick new distance from base point: - Alege noua distanţa de la punctul de bază: - - - + Select an object to project Selectați un obiect de proiectat - - This object type is not editable - Acest tip de obiect nu poate fi editat - - - + Please select only one object Vă rugăm să selectaţi doar un singur obiect - + Select a Draft object to edit Selectați un obiect ciornă de editat - + Active object must have more than two points/nodes Obiectul activ trebuie să aibă mai mult de două puncte/noduri - + Endpoint of BezCurve can't be smoothed Punctul final al curbei Bezier nu poate fi netezit - + Select an object to convert Selectați un obiect de convertit - + Select an object to array Selectați un obiect de recopiat - + Please select base and path objects Sélectionați un object de bază și o traiectorie - + Please select base and pointlist objects Selectionați un object de bază și o listă de obiecte puncte - + Select an object to clone Selectați un obiect de clonat - + Select face(s) on existing object(s) Selectați fațete ale obiectului(elor) existent(e) - + Select an object to mirror Selectați un obiect pentru a-l face simetric - - Pick start point of mirror line: - Selectați punctul de plecare al liniei de simetrie: - - - - Pick end point of mirror line: - Selectați punctul de sfârșit al liniei de simetrie: - - - + This tool only works with Wires and Lines Acest instrument funcționează doar cu fire și linii - - - Pick target point: - Selectați punctul țintă: - - - - Pick endpoint of leader line: - Selectați punctul terminal al liniei de repère : - - - - Pick text position: - Alegeți poziția textului: - ODA (formerly Teigha) File Converter not found, DWG support is disabled Convertorul de fișiere ODA (fostă Teigha) este negăsit, suportul DWG este dezactivat - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4306,56 +4299,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Scalare - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Partea de sus + + + + Front + Din față + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automat + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotaţie + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Pescaj + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilități + + + + Wire tools + Instrumente pentru polilinii + + + + Snapping + Ancorare + diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 818e045a5b..75e0e12190 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index c804811350..e134c6dd31 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Задать шаблон штриховки - + Sets the size of the pattern Задать размер шаблона - + Startpoint of dimension Начальная точка размера - + Endpoint of dimension Конечная точка размера - + Point through which the dimension line passes Точка прохождения размерной линии - + The object measured by this dimension Измеряемый объект - + The geometry this dimension is linked to Геометрия этого размера связана с - + The measurement of this dimension Измерение этого размера - + For arc/circle measurements, false = radius, true = diameter Для дуг и окружностей: ложь — радиус, истина — диаметр - + Font size Размер шрифта - + The number of decimals to show Отображаемые цифры после запятой - + Arrow size Размер стрелки - + The spacing between the text and the dimension line Отступ текста от размерной линии - + Arrow type Тип стрелки - + Font name Шрифт - + Line width Ширина линии - + Line color Цвет линии - + Length of the extension lines Длина линий расширения - + Rotate the dimension arrows 180 degrees Повернуть размерные стрелки на 180° - + Rotate the dimension text 180 degrees Повернуть размерный текст на 180° - + Show the unit suffix Показать единицу измерения - + The position of the text. Leave (0,0,0) for automatic position Положение текста. Оставьте (0,0,0) для автоматического расположения - + Text override. Use $dim to insert the dimension length Принудительный текст. Используйте $dim для вставки длины размера - + A unit to express the measurement. Leave blank for system default Единицы измерения. Оставьте пустым для использования системных настроек по умолчанию - + Start angle of the dimension Начальный угол размера - + End angle of the dimension Конечный угол размера - + The center point of this dimension Центральная точка размера - + The normal direction of this dimension Направление нормали размера - + Text override. Use 'dim' to insert the dimension length Принудительный текст. Используйте 'dim' для вставки длины размера - + Length of the rectangle Длина прямоугольника - + Radius to use to fillet the corners Радиус скругления углов - + Size of the chamfer to give to the corners Размер фаски углов - + Create a face Создать грань - + Defines a texture image (overrides hatch patterns) Задать изображение текстуры (заменяет шаблон штриховки) - + Start angle of the arc Начальный угол дуги - + End angle of the arc (for a full circle, give it same value as First Angle) Конечный угол дуги (для окружности равен начальному углу) - + Radius of the circle Радиус окружности - + The minor radius of the ellipse Малая полуось эллипса - + The major radius of the ellipse Большая полуось эллипса - + The vertices of the wire Вершины ломаной - + If the wire is closed or not Ломаная замкнута или нет - + The start point of this line Начальная точка линии - + The end point of this line Конечная точка линии - + The length of this line Длина линии - + Create a face if this object is closed Создать грань, если объект замкнут - + The number of subdivisions of each edge Количество делений каждого угла - + Number of faces Количество граней - + Radius of the control circle Радиус задающей окружности - + How the polygon must be drawn from the control circle Как должен быть создан полигон из задающей окружности - + Projection direction Направление проекции - + The width of the lines inside this object Толщина линий в объекте - + The size of the texts inside this object Размер текста внутри объекта - + The spacing between lines of text Междустрочное расстояние текста - + The color of the projected objects Цвет проекции объектов - + The linked object Связанный объект - + Shape Fill Style Стиль заполнения - + Line Style Стиль линии - + If checked, source objects are displayed regardless of being visible in the 3D model Если флажок установлен, исходные объекты отображаются независимо от видимости в 3D-модели - + Create a face if this spline is closed Создать грань, если сплайн замкнут - + Parameterization factor Параметрический коэффициент - + The points of the Bezier curve Точки кривой Безье - + The degree of the Bezier function Степень функции Безье - + Continuity Непрерывность - + If the Bezier curve should be closed or not Кривая Безье замкнута или нет - + Create a face if this curve is closed Создать грань, если кривая замкнута - + The components of this block Компоненты блока - + The base object this 2D view must represent Базовый объект представляемый этим двумерным видом - + The projection vector of this object Вектор проекции объекта - + The way the viewed object must be projected Способ проецирования отображаемого объекта - + The indices of the faces to be projected in Individual Faces mode Индексы граней для проекции в режиме отдельных граней - + Show hidden lines Показать скрытые линии - + The base object that must be duplicated Базовый объект для дублирования - + The type of array to create Тип создаваемого массива - + The axis direction Направление осей - + Number of copies in X direction Количество копий по X - + Number of copies in Y direction Количество копий по Y - + Number of copies in Z direction Количество копий по Z - + Number of copies Количество копий - + Distance and orientation of intervals in X direction Расстояние и ориентация интервалов в направлении X - + Distance and orientation of intervals in Y direction Расстояние и ориентация интервалов в направлении Y - + Distance and orientation of intervals in Z direction Расстояние и ориентация интервалов в направлении Z - + Distance and orientation of intervals in Axis direction Расстояние и ориентация интервалов в направлении оси - + Center point Центральная точка - + Angle to cover with copies Угол для заполнения копиями - + Specifies if copies must be fused (slower) Копии должны быть объединены (медленнее) - + The path object along which to distribute objects Объект траектории, вдоль которого распределить объекты - + Selected subobjects (edges) of PathObj Выбранные подобъекты (края) объекта траектории - + Optional translation vector Необязательный вектор преобразования - + Orientation of Base along path Ориентация базового объекта по траектории - + X Location Расположение по X - + Y Location Расположение по Y - + Z Location Расположение по Z - + Text string Текстовая строка - + Font file name Имя файла шрифта - + Height of text Высота текста - + Inter-character spacing Межсимвольное расстояние - + Linked faces Связанные грани - + Specifies if splitter lines must be removed Определяет, если разделители должны быть удалены - + An optional extrusion value to be applied to all faces Дополнительное значение выдавливания применяемое ко всем граням - + Height of the rectangle Высота прямоугольника - + Horizontal subdivisions of this rectangle Горизонтальное деление прямоугольника - + Vertical subdivisions of this rectangle Вертикальные деление прямоугольника - + The placement of this object Размещение объекта - + The display length of this section plane Отображение длины плоскости сечения - + The size of the arrows of this section plane Размер углов плоскости сечения - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Для режимов обрезки линий и обрезки граней эти уровни расположены в точке среза - + The base object is the wire, it's formed from 2 objects Базовым объектом является ломаная, состоящая из 2 объектов - + The tool object is the wire, it's formed from 2 objects Инструментальный объект является ломаной состоящей из двух объектов - + The length of the straight segment Длина прямого сегмента - + The point indicated by this label Точка, отмеченная этой меткой - + The points defining the label polyline Точки, определяющие ломаную линию метки - + The direction of the straight segment Направлении прямолинейного сегмента - + The type of information shown by this label Тип информации, показываемой этой меткой - + The target object of this label Целевой объект этой метки - + The text to display when type is set to custom Текст для отображения, когда установлен пользовательский тип - + The text displayed by this label Текст, отображаемый этой меткой - + The size of the text Размер шрифта текста - + The font of the text Шрифт текста - + The size of the arrow Размер стрелки - + The vertical alignment of the text Вертикальное выравнивание текста - + The type of arrow of this label Тип стрелки этой метки - + The type of frame around the text of this object Тип рамки вокруг текста данного объекта - + Text color Цвет текста - + The maximum number of characters on each line of the text box Максимальное количество символов в каждой строке текстового поля - + The distance the dimension line is extended past the extension lines Расстояние, на которое размерная линия расширена за выносные линии - + Length of the extension line above the dimension line Длина выносной линии над размерной линией - + The points of the B-spline Точки B-сплайна - + If the B-spline is closed or not B-сплайн замкнут или нет - + Tessellate Ellipses and B-splines into line segments Тесселяция Эллипсов и B-Сплайнов в сегменты линий - + Length of line segments if tessellating Ellipses or B-splines into line segments Длина сегментов линии при тесселяции Эллипсов или B-Сплайнов в линейные сегменты - + If this is True, this object will be recomputed only if it is visible Если это значение Истина, этот объект будет пересчитан, только если он видим - + Base Основание - + PointList Список точек - + Count Количество - + The objects included in this clone Объекты, включенные в этот клон - + The scale factor of this clone Масштаб этого клона - + If this clones several objects, this specifies if the result is a fusion or a compound При клонировании нескольких объектов, это указывает, является ли результат слиянием или составным - + This specifies if the shapes sew Это определяет, нужно ли сшивать фигуры - + Display a leader line or not Отображение выноски или нет - + The text displayed by this object Текст отображаемый этим объектом - + Line spacing (relative to font size) Межстрочный интервал (относительно размера шрифта) - + The area of this object - The area of this object + Площадь этого объекта - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Склон - + Scale Масштаб - + Writing camera position Записать позицию камеры - + Writing objects shown/hidden state Запись состояния объектов показан/скрыт - + X factor Коэффициент X - + Y factor Коэффициент Y - + Z factor Коэффициент Z - + Uniform scaling Равномерное масштабирование - + Working plane orientation Ориентация рабочей плоскости @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager Ошибка при загрузке dxf библиотек. Пожалуйта установите библиотеку расширения dxf вручную из меню Инструменты-> менеджер расширений - + This Wire is already flat Эта кривая уже плоская - + Pick from/to points Выбрать от/до точки - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Наклонить выбранные Ломаные/Прямые 0 = горизонтально, 1 = 45 градусов вверх, -1 = 45 градусов вниз + + + Create a clone + Создать клон + DraftShapeStringGui @@ -860,12 +900,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Добавить в группу конструкции - + Adds the selected objects to the Construction group Добавить выбранные объекты в группу конструкции @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Добавить точку - + Adds a point to an existing Wire or B-spline Добавить точку к существующей ломаной/B-сплайну @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Переместить в группу... - + Moves the selected object(s) to an existing group Перемещает выбранный(е) объект(ы) в существующую группу @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Применить текущий стиль - + Applies current line width and color to selected objects Применить текущую ширину линии и цвет для выделенных объектов @@ -912,12 +952,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Дуга - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -925,7 +965,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -933,12 +973,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -946,12 +986,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Массив - + Creates a polar or rectangular array from a selected object Создать круговой или прямоугольный массив из выделенного объекта @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup Автогруппирование - + Select a group to automatically add all Draft & Arch objects to Выберите группу к которой автоматически добавить все объекты типа Эскиз и Архитектурный @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-сплайн - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Создать B-сплайн. CTRL для привязки, SHIFT для ограничения @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Кривая Безье - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Создать кривую Безье. CTRL для привязки, SHIFT для ограничения @@ -998,7 +1038,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1006,12 +1046,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Окружность - + Creates a circle. CTRL to snap, ALT to select tangent objects Создать окружность. CTRL для привязки, ALT для выбора касательной @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Клонировать - + Clones the selected object(s) Создать клон выделенных объектов @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Замкнуть линию - + Closes the line being drawn Замкнуть рисуемую линию @@ -1045,12 +1085,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1060,12 +1100,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Удалить точку - + Removes a point from an existing Wire or B-spline Удаляет точку из существующих ломаных или B-сплайнов @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Размер - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Создать размер. CTRL для привязки, SHIFT для ограничения, ALT для выбора сегмента @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Разделить - + Explodes the selected objects into simpler objects, or subtracts faces Разделить выбранные объекты на более простые объекты, или вычесть грани @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Преобразовать из Эскиза в Набросок - + Convert bidirectionally between Draft and Sketch objects Конвертировать двунаправленно между объектами Эскиза и Наброска @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Рисунок - + Puts the selected objects on a Drawing sheet Помещает выбранные объекты на лист чертежа @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Правка - + Edits the active object Редактировать активный объект @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Эллипс - + Creates an ellipse. CTRL to snap Создать эллипс. CTRL для привязки @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Граневяз - + Creates a facebinder object from selected face(s) Создать объект, состоящий из выделенных граней другого объекта @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Закончить линию - + Finishes a line without closing it Закончить линию без ее закрытия @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Перевернуть размер - + Flip the normal direction of a dimension Перевернуть нормальное направление размера @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Лечить - + Heal faulty Draft objects saved from an earlier FreeCAD version Для исправления испорченных Эскизов созданных в ранних версиях FreeCAD @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Соединить - + Joins two wires together Соединяет две ломаные @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Метка - + Creates a label, optionally attached to a selected object or element Создает необязательную метку к выбранному объекту или элементу + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Линия - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Создать линию по двум точкам. CTRL для привязки, SHIFT для ограничения @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Отразить - + Mirrors the selected objects along a line defined by two points Отражает выбранные объекты вдоль линии, определенной двумя точками @@ -1273,12 +1321,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Переместить - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1286,12 +1334,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Смещение - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Смещения активного объекта.CTRL, для привязки, SHIFT, для ограничения, ALT для копирования @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Массив по направляющей - + Creates copies of a selected object along a selected path. Создать копии выбранного объекта вдоль выбранной направляющей. @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Точка - + Creates a point object Создать объект точка @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Массив точек - + Creates copies of a selected object on the position of points. Создает копии выбранного объекта в положениях точек. @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Многоугольник - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Создать правильный многоугольник. CTRL для привязки, SHIFT для ограничения @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Прямоугольник - + Creates a 2-point rectangle. CTRL to snap Создать прямоугольник по двум точкам. CTRL для привязки @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Повернуть - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Поворот выделенных объектов. CTRL для привязки, SHIFT для ограничения, ALT для создания копии @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Масштаб - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Масштабирует выбранные объекты из базовой точки. CTRL для привязки, SHIFT для ограничения, ALT для копирования @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Выбрать группу - + Selects all objects with the same parents as this group Выделяет все объекты с одинаковыми родителями в группу @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Выбор плоскости - + Select a working plane for geometry creation Выберите рабочую плоскость для создания геометрии @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Создает прокси объект из текущей рабочей плоскости - + Create Working Plane Proxy Создать прокси рабочей плоскости @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Двумерный вид фигуры - + Creates Shape 2D views of selected objects Создать двумерные виды выбранных объектов @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Текст в кривую... - + Creates text string in shapes. Создать текстовую строку из кривых. @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Показывать панель привязок - + Shows Draft snap toolbar Показать панель привязки из инструментов черчения @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Задать Наклон - + Sets the slope of a selected Line or Wire Задать наклон выбранной линии или ломанной @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Углы - + Snaps to 45 and 90 degrees points on arcs and circles Привязка к октантам дуг и окружностей @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Центр - + Snaps to center of circles and arcs Привязка к центру окружностей или дуг @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Размеры - + Shows temporary dimensions when snapping to Arch objects Показывать временные размеры при привязке к дуге @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Конечные точки - + Snaps to endpoints of edges Привязывает по конечным точкам ребра @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Продолжение - + Snaps to extension of edges Привязка к продолжению сегмента ребра @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Сетка - + Snaps to grid points Привязывает по сетке @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Пересечение - + Snaps to edges intersections Привязка к пересечению рёбер @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Включить/выключить привязки - + Activates/deactivates all snap tools at once Включает и выключает все установленные привязки - + Lock Заблокировать @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Середина - + Snaps to midpoints of edges Привязывает к середине ребра @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Ближайшие - + Snaps to nearest point on edges Привязывает к ближайшим точкам на рёбрах @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ортогональная - + Snaps to orthogonal and 45 degrees directions Привязывает к ортогональным и 45 градусным направлениям сегментов @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Параллельно - + Snaps to parallel directions of edges Привязывает к параллельным направлениям рёбер @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Перпендикулярно - + Snaps to perpendicular points on edges Перпендикулярная привязка к ребру @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Специальные - + Snaps to special locations of objects Привязка к особым частям объектов @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane К рабочей плоскости - + Restricts the snapped point to the current working plane Привязывает точки к текущей рабочей плоскости @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Разделить - + Splits a wire into two wires Разделяет ломаную на две ломаные @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Растягивание - + Stretches the selected objects Растянуть выбранный объект @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Текст - + Creates an annotation. CTRL to snap Создать Заметку. CTRL для привязки @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Переключение режима конструирования для следующих объектов. - + Toggle Construction Mode Переключить режим конструирования @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Переключить режима продолжения - + Toggles the Continue Mode for next commands. Переключение режима продления для следующей команды. @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Переключить режим отображения - + Swaps display mode of selected objects between wireframe and flatlines Переключает режим отображения выбранных объектов между каркасным и плоскими линиями @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Показывать сетку - + Toggles the Draft grid on/off Включение или выключение сетки чертежа - + Grid Сетка - + Toggles the Draft grid On/Off Включение или выключение сетки чертежа @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Подогнать - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Подогнать выбранный объект или выдавить одиночную грань. CTRL для привязки, SHIFT ограничить к текущему сегменту или к нормали, ALT инвертировать @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Отменить последний сегмент - + Undoes the last drawn segment of the line being drawn Отмена последнего нарисованного сегмента рисуемой линии @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Обновить - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Объединить выбранные объекты в один, или преобразовать замкнутые ломаные в заполненные грани, или объединить грани - - Draft_VisGroup - - - VisGroup - ВидоГруппа - - - - Adds a VisGroup - Добавить в ВидоГруппу - - Draft_Wire - - DWire - Ломаная + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Создать многоточечную линию (DWire). CTRL для привязки, SHIFT для ограничения + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Ломаная в B-сплайн - + Converts between Wire and B-spline Преобразование Ломаной в B-сплайн и наоборот @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Основные параметры черчения - + This is the default color for objects being drawn while in construction mode. Цвет по умолчанию для объектов, обрабатываемых в режиме конструктора. - + This is the default group name for construction geometry Имя группы по умолчанию для конструктора геометрии - + Construction Конструктор @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainСохранить текущий цвет и толщину линии между сессиями - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Если выбран этот пункт, режим копирования будет применен для поледующих команд, в противном случае выполнение команд всегда будет начинаться без режима копирования - + Global copy mode Глобальный режим копирования - + Default working plane Рабочая плоскость по умолчанию - + None Ничего - + XY (Top) XY (cверху) - + XZ (Front) XZ (спереди) - + YZ (Side) YZ (сбоку) @@ -1983,12 +2018,12 @@ such as "Arial:Bold" Общие настройки - + Construction group name Имя конструкционной группы - + Tolerance Точность @@ -2013,22 +2048,22 @@ such as "Arial:Bold" Здесь можно указать каталог, содержащий файлы SVG, содержащие определения <шаблонов>, которые могут быть добавлены в стандартные шаблоны типов штриховок модуля Черчения - + Draft interface mode Режим интерфейса черчения - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Это режим пользовательского интерфейса, в котором будет работать модуль Проект: панели инструментов будут вмещать все параметры проекта на отдельной панели инструментов, в то время как режим Панели задач будет использовать Панель задач FreeCAD для его взаимодействия с пользователем - + Toolbar Панель инструментов - + Taskview Менеджер задач @@ -2058,12 +2093,12 @@ such as "Arial:Bold" Режим alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Как правило, после копирования объектов будут выбраны полученные копии. Если установить этот параметр, будут выбираться базовые объекты. - + Select base objects after copying Выбор базовых объектов после копирования @@ -2098,7 +2133,7 @@ such as "Arial:Bold" Основные линии рисуются толще. Укажите здесь, сколько квадратов между основными линиями. - + Internal precision level Уровень внутренней точности @@ -2213,12 +2248,12 @@ such as "Arial:Bold" Преобразование белых линий в черные - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Если отмечено, то Инструмент эскиз по возможности будет создавать примитивы Деталь вместо объектов эскиза. - + Use Part Primitives when available Использовать примитивы Деталь по возможности @@ -2238,12 +2273,7 @@ such as "Arial:Bold" Всегда привязывать (отключить модификатор привязки) - - Construction geometry - вспомогательная геометрия - - - + Construction geometry color Цвет вспомогательной геометрии @@ -2383,7 +2413,7 @@ such as "Arial:Bold" Выберите файл шрифта - + Fill objects with faces whenever possible Залить объекты поверхностями, если это возможно @@ -2673,7 +2703,7 @@ such as "Arial:Bold" Автоматическое обновление (только для устаревшего импортёра) - + Prefix labels of Clones with: Префикс меток клонов: @@ -2710,7 +2740,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Это метод выбирается для импорта цвета объекта SVG во FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Если этот параметр выбран, по умолчанию объекты будут отображаться как заполненные. В противном случае они будут отображаться как каркас @@ -2790,17 +2820,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Если этот параметр выбран, объекты одного слоя будут объединены в блоки. Это ускорит работу с объектами, но сделает сложнее их редактирование - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Если этот флажок установлен, в окне вывода при запуске команд будут отображаться пошаговые инструкции - - - - Verbose command line mode - Режим командной строки с подробным выводом - - - + When drawing lines, set focus on Length instead of X coordinate При рисовании линий, установите фокус на длину вместо координаты X @@ -2880,12 +2900,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Макс сплайн сегментов: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2896,694 +2916,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Вспомогательная геометрия + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Относительно + + + + R + R + + + + Continue + Продолжить + + + + T + T + + + + Close + Закрыть + + + + O + O + + + + Copy + Скопировать + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Заполнить + + + + L + L + + + + Exit + Выход + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Длина + + + + H + H + + + + Wipe + Стереть + + + + W + W + + + + Set WP + Задать РП + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Ограничить по X + + + + X + X + + + + Restrict Y + Ограничить по Y + + + + Y + Y + + + + Restrict Z + Ограничить по Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Привязки - - - Draft creation tools - инструменты создания чертежа - - - - Draft modification tools - инструменты изменения чертежа - - - - Utilities - Вспомогательные - - - - Wire tools - Инструменты ломаной - - - - Snapping - Привязка - draft - + not shape found фигура не найдена - + All Shapes must be co-planar Все фигуры должны быть компланарны - + The given object is not planar and cannot be converted into a sketch. Данный объект не плоский и не может быть преобразован в Эскиз. - + Unable to guess the normal direction of this object Невозможно предположить направление нормали объекта - + Draft Command Bar Командная строка черчения - + Toggle construction mode Переключить режим конструирования - + Current line color Текущий цвет линии - + Current face color Текущий цвет поверхности - + Current line width Текущая ширина линии - + Current font size Текущий размер шрифта - + Apply to selected objects Применить к выбранным объектам - + Autogroup off Автогруппировка выключена - + active command: Текущая команда: - + None Ничего - + Active Draft command Активная команда черчения - + X coordinate of next point абсцисса следующей точки - + X X - + Y Y - + Z Z - + Y coordinate of next point ордината следующей точки - + Z coordinate of next point аппликата следующей точки - + Enter point Введите точку - + Enter a new point with the given coordinates Введите новую точку с заданными координатами - + Length Длина - + Angle Угол - + Length of current segment Длина текущего сегмента - + Angle of current segment Угол текущего сегмента - + Radius Радиус - + Radius of Circle Радиус окружности - + If checked, command will not finish until you press the command button again Если отмечено, команда не будет завершена до нажатия кнопки снова - + If checked, an OCC-style offset will be performed instead of the classic offset Если флажок установлен, вместо классического смещения будет выполняться смещение в стиле OCC - + &OCC-style offset Смещение в стиле &OCC - + Add points to the current object Добавление точек к текущему объекту - + Remove points from the current object Удаление точек из текущего объекта - + Make Bezier node sharp Сделать узел Безье острым - + Make Bezier node tangent Сгладить узел Безье - + Make Bezier node symmetric Создать симметричный узел Безье - + Sides Стороны - + Number of sides Количество сторон - + Offset Смещение - + XY (top) XY (сверху) - - Select XY plane - Выберите плоскость XY - - - + XZ (front) XZ (спереди) - - Select XZ plane - Выберите плоскость XZ - - - + YZ (side) YZ (сбоку) - - Select YZ plane - Выберите плоскость YZ - - - + View Вид - - Select plane perpendicular to the current view - Выберите плоскость, перпендикулярную текущему виду - - - + Auto Авто - - Do not project points to a drawing plane - Не проецировать точки на плоскость рисунка - - - + Text string to draw Cтрока текста для рисования - + String Строка - + Height of text Высота текста - + Height Высота - + Intercharacter spacing Межсимвольное расстояние - + Tracking Межсимвольное расстояние - + Full path to font file: Полный путь к файлу шрифта: - + Open a FileChooser for font file Открыть обозреватель файлов для выбора файла шрифта - + Grid spacing Шаг сетки - + The spacing between the grid lines Пространство между линиями сетки - + Main line every Основные линии каждые - + The number of lines between main lines Количество линий между основными - + Center plane on view Центрировать плоскость вида - - Select Plane - Выберите плоскость - - - + Line Линия - + DWire Ломаная - + Circle Окружность - + Center X Центр X - + Arc Дуга - + Point Точка - + Label Метка - + Distance Расстояние - + Trim Подгонка - + Pick Object Выберите объект - + Edit Редактировать - + Global X Глобальный X - + Global Y Глобальный Y - + Global Z Глобальный Z - + Local X Локальный X - + Local Y Локальный Y - + Local Z Локальный Z - + Invalid Size value. Using 200.0. Неверное значение размера. Используется 200.0. - + Invalid Tracking value. Using 0. Неверный интервал между символами. Используется 0. - + Please enter a text string. Пожалуйста, введите текст. - + Select a Font file Выберите файл шрифта - + Please enter a font file. Пожалуйста, введите файл шрифта. - + Autogroup: Автогруппировка: - + Faces Грани - + Remove Удалить - + Add Добавить - + Facebinder elements Элементы граневяза - + Create Line Создать линию - - Pick next point: - - Укажите следующую точку - - - + Convert to Wire Преобразовать в ломаную - + BSpline Bсплайн - + BezCurve Кривая Безье - + Create BezCurve Создать кривую Безье - + Rectangle Прямоугольник - + Create Plane Создать плоскость - + Create Rectangle Создать прямоугольник - + Create Circle Создать окружность - + Create Arc Создать дугу - + Start Angle Начальный угол - + Aperture Смещение - + Polygon Многоугольник - + Create Polygon Создать Многоугольник - + Ellipse Эллипс - + Create Ellipse Создать Эллипс - + Text Текст - + Create Text Создать Текст - + Dimension Размер - + Create Dimension Создать Размер - + ShapeString Текст в кривую - + Create ShapeString Создать фигуру-текст - + Copy - Скопировать + Копировать - + Move Переместить - + Change Style Изменить Стиль - + Rotate Повернуть - - Cannot offset this object type - - Не удается сместить этот тип объекта - - - - + Stretch Растягивание - + Upgrade Обновить - + Downgrade Разделить - + Selection is not a Knot Выбран не узел - + Convert to Sketch Преобразовать в Эскиз - + Convert to Draft Преобразовать в Эскиз - + Convert Преобразовать - + Array Массив - + Create Point Создать точку - + Mirror Отразить - + &Draft &Черчение @@ -3606,178 +3773,178 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Чтобы разрешить FreeCAD скачать эту библиотеку, ответьте Да. - + Draft.makeBSpline: not enough points Draft.makeBSpline: недостаточно точек - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Равные конечные точки принудительно замкнуты - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Недопустимый набор точек - + No object given Объект не задан - + The two points are coincident Две точки совпадают - + Found groups: closing each open object inside Найдены группы: закрытие каждого открытого объекта внутри - + Found mesh(es): turning into Part shapes Найдена полигональная сетка: преобразую в фигурные детали - + Found 1 solidifiable object: solidifying it Найден 1 незамкнутый объект: исправляем его - + Found 2 objects: fusing them Найдено два объекта: объединяю - + Found several objects: creating a shell Найдено несколько объектов: создание оболочки - + Found several coplanar objects or faces: creating one face Найдено несколько компланарных объектов или граней: создание одной грани - + Found 1 non-parametric objects: draftifying it Найден один непараметрический объект: создаем его эскиз - + Found 1 closed sketch object: creating a face from it Найден 1 закрытый эскиз объекта: создаю из него грань - + Found 1 linear object: converting to line Найден 1 линейный объект: преобразование в линию - + Found closed wires: creating faces Найдены замкнутые ломаные: создание граней - + Found 1 open wire: closing it Найдена одна незамкнутая линия: замыкаю её - + Found several open wires: joining them Найдено несколько незамкнутых ломаных: соединяю их - + Found several edges: wiring them Найдено несколько кромок: соединяем их - + Found several non-treatable objects: creating compound Найдено несколько необрабатываемых объектов: создание составного объекта - + Unable to upgrade these objects. Не удается обновить эти объекты. - + Found 1 block: exploding it Найден 1 блок: разделение - + Found 1 multi-solids compound: exploding it Найдено 1 соединение нескольких тел: Разделение тел - + Found 1 parametric object: breaking its dependencies Найден один параметрический объект: устраняю его зависимости - + Found 2 objects: subtracting them Найдено 2 объекта: вычитание - + Found several faces: splitting them Найдено несколько поверхностей: разделение - + Found several objects: subtracting them from the first one Найдено несколько объектов: вычитание их из первого - + Found 1 face: extracting its wires Найдена 1 поверхность: извлечение ее направляющих - + Found only wires: extracting their edges Найдены только ломаные: извлечение их линий - + No more downgrade possible Дальнейшее разделение не возможно - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Замкнут в первой/последней точке. Геометрия не обновляется. - + No point found Точек не найдено - + ShapeString: string has no wires ShapeString: строка не имеет ломаных - + Relative Относительно - + Continue Продолжить - + Close Закрыть @@ -3822,7 +3989,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Ограничить по Z - + Select edge Выбрать ребро @@ -3837,7 +4004,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Режим длины - + Wipe Стереть @@ -3852,454 +4019,279 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Выбор объекта по узловым точкам - + Check this to lock the current angle Отметьте чтобы закрепить текущий угол - + Coordinates relative to last point or absolute Координаты относительно последней точки или абсолютные - + Filled Заполнено - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Установить флажок если объект должен отображаться как заполненный, в противном случае он будет отображаться как каркас - - - + Finish Завершить - + Finishes the current drawing or editing operation Завершить текущую операцию черчения или редактирования - + &Undo (CTRL+Z) Отменить (Ctrl+Z) - + Undo the last segment Отменить последний сегмент - + Finishes and closes the current line Закончить и замкнуть текущую линию - + Wipes the existing segments of this line and starts again from the last point Стирает существующие сегменты этой линии и начинает снова с последней точки - + Set WP Задать РП - + Reorients the working plane on the last segment Переориентирует рабочую плоскость по последнему сегменту - + Selects an existing edge to be measured by this dimension Выбирает существующую кромку чтобы измерить размер - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Если флажок установлен, объекты будут скопированы, иначе будут перенесены. Настройки-> Чертёж-> Режим глобального копирования сохранить для последующих команд. - - options - параметры - - - + Default По умолчанию - + Pick a face to define the drawing plane Укажите грань, чтобы задать плоскость черчения - - First point: - Первая точка: - - - - Closing - Замыкание - - - + Create Wire Создать ломаную - - Removing last point - Удаление последней точки - - - - Next point: - Следующая точка: - - - - Restarting from - Перезапуск с этого места - - - + Unable to create a Wire from selected objects Невозможно создать ломаную из выбранных объектов - + Spline has been closed Сплайн замкнут - + Last point has been removed Последняя точка была удалена - - Pick next point, or Finish (shift-F) or close (o): - Укажите следующую точку или Завершить (Shift-F) или замкнуть (O): - - - + Create B-spline Создать B-сплайн - + Bezier curve has been closed Кривая Безье замкнута - - Pick first point: - Укажите первую точку: - - - - Pick opposite point: - Укажите противоположную точку: - - - - Pick center point: - Укажите центральную точку: - - - - Pick radius: - Укажите радиус: - - - - Pick start angle: - Укажите начальный угол: - - - - Pick aperture: - Укажите отклонение: - - - - Aperture angle: - Угол отклонения: - - - - Pick location point: - Выберите положение точки: - - - + Edges don't intersect! Рёбра не пересекаются! - + Pick ShapeString location point: Укажите точку расположения текста: - + Select an object to move Выберите объект для перемещения - - Pick start point: - Указать начальную точку: - - - - Pick end point: - Укажите конечную точку: - - - + Select an object to rotate Выберите объект для поворота - - Pick rotation center: - Выберите центр вращения: - - - - Pick base angle: - Укажите начальный угол: - - - - Pick rotation angle: - Укажите угол поворота: - - - + Select an object to offset Выделите объект для смещения - + Offset only works on one object at a time Смещение работает только на один объект за раз - + Sorry, offset of Bezier curves is currently still not supported К сожалению, смещение кривых Безье ещё не поддерживается - - Pick distance: - Выберите расстояние: - - - + Select an object to stretch Выберите объект, чтобы растянуть - - Pick first point of selection rectangle: - Выберите первую точку прямоугольника: - - - - Pick opposite point of selection rectangle: - Выберите противоположную точку прямоугольника: - - - - Pick start point of displacement: - Выберите начальную точку перемещения: - - - - Pick end point of displacement: - Выберите конечную точку перемещения: - - - + Turning one Rectangle into a Wire Преобразовать прямоугольник в ломаную - + Select an object to join Выберите объект для присоединения - + Join Соединить - + Select an object to split Выберите объект для разделения - + Select an object to upgrade Выберите объект для обновления - + Select object(s) to trim/extend Выберите объект(ы) для подгонки - + Unable to trim these objects, only Draft wires and arcs are supported Невозможно обрезать эти объекты, поддерживаются только ломаные и дуги - + Unable to trim these objects, too many wires Невозможно обрезать объекты, слишком много ломаных - + These objects don't intersect Эти объекты не пересекаются - + Too many intersection points Слишком много точек пересечения - + Select an object to scale Выберите объект для масштабирования - - Pick base point: - Выберите базовую точку: - - - - Pick reference distance from base point: - Укажите ориентировочное расстояние от базовой точки: - - - - Pick new distance from base point: - Укажите новое расстояние от базовой точки: - - - + Select an object to project Выберите объект для проекции - - This object type is not editable - Этот тип объекта не редактируется - - - + Please select only one object Пожалуйста, выберите только один объект - + Select a Draft object to edit Выберите объект Эскиза для редактирования - + Active object must have more than two points/nodes Активный объект должен иметь более двух точек/узлов - + Endpoint of BezCurve can't be smoothed Конечная точка кривой Безье не может быть сглажена - + Select an object to convert Выберите объект для преобразования - + Select an object to array Выберите объект для создания массива - + Please select base and path objects Выберите базовый объект и траекторию - + Please select base and pointlist objects Выберите базовый объект и объект набора точек - + Select an object to clone Выберите объект для клонирования - + Select face(s) on existing object(s) Выберите поверхность(и) на существующем(их) объекте(ах) - + Select an object to mirror Выберите объект для отражения - - Pick start point of mirror line: - Укажите начальную точку линии отражения: - - - - Pick end point of mirror line: - Укажите конечную точку линии отражения: - - - + This tool only works with Wires and Lines Данный инструмент работает только с ломаными и прямыми - - - Pick target point: - Укажите целевую точку: - - - - Pick endpoint of leader line: - Укажите конечную точку выносной линии: - - - - Pick text position: - Укажите положение текста: - ODA (formerly Teigha) File Converter not found, DWG support is disabled Конвертер файлов ODA (Teigha) не найден, поддержка DWG отключена - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4309,56 +4301,354 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Масштаб - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Сверху + + + + Front + Спереди + + + + Side + Side + + + + Current working plane + Текущая рабочая плоскость + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Автоматически + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Вращение + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Осадка + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Вспомогательные + + + + Wire tools + Инструменты ломаной + + + + Snapping + Привязка + diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.qm b/src/Mod/Draft/Resources/translations/Draft_sk.qm index 04f0e9772f..48edd8874a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sk.qm and b/src/Mod/Draft/Resources/translations/Draft_sk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.ts b/src/Mod/Draft/Resources/translations/Draft_sk.ts index f4a7396e20..66b9cfcd22 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sk.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definuje vzor šrafovania - + Sets the size of the pattern Nastaví veľkosť vzoru - + Startpoint of dimension Východiskový bod rozmeru - + Endpoint of dimension Koncový bod rozmeru - + Point through which the dimension line passes Point through which the dimension line passes - + The object measured by this dimension The object measured by this dimension - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter For arc/circle measurements, false = radius, true = diameter - + Font size Veľkosť písma - + The number of decimals to show The number of decimals to show - + Arrow size Veľkosť šípky - + The spacing between the text and the dimension line The spacing between the text and the dimension line - + Arrow type Typ šípky - + Font name Názov písma - + Line width Hrúbka čiary - + Line color Farba čiary - + Length of the extension lines Length of the extension lines - + Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees - + Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default A unit to express the measurement. Leave blank for system default - + Start angle of the dimension Start angle of the dimension - + End angle of the dimension End angle of the dimension - + The center point of this dimension The center point of this dimension - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Length of the rectangle - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Create a face - + Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) - + Start angle of the arc Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle Radius of the circle - + The minor radius of the ellipse The minor radius of the ellipse - + The major radius of the ellipse The major radius of the ellipse - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line The start point of this line - + The end point of this line The end point of this line - + The length of this line The length of this line - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Number of faces - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text The spacing between lines of text - + The color of the projected objects The color of the projected objects - + The linked object Prepojený objekt - + Shape Fill Style Shape Fill Style - + Line Style Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Show hidden lines - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Number of copies Number of copies - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Location - + Y Location Y Location - + Z Location Z Location - + Text string Text string - + Font file name Font file name - + Height of text Výška textu - + Inter-character spacing Inter-character spacing - + Linked faces Linked faces - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object Umiestnenie objektu - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Základňa - + PointList PointList - + Count Počet - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale Škála, zmena veľkosti - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Pridá bod - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Použi aktuálny štýl - + Applies current line width and color to selected objects Na vybraté objekty použiť aktuálnu hrúbku čiary aj farbu @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Oblúk - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Pole - + Creates a polar or rectangular array from a selected object Vytvára polárne alebo obdĺžnikové pole z vybratého objektu @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Kružnica - + Creates a circle. CTRL to snap, ALT to select tangent objects Vytvorí kruh. CTRL pre prichytenie, ALT vyberie tangent @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Klonuj - + Clones the selected object(s) Klonuj vybraný objekt(y) @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Ukončiť čiaru - + Closes the line being drawn Ukončiť rozpracovanú čiaru @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Odstráni bod - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Kóta - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Vytvorí kótu. CTRL uchopiť, SHIFT obmedziť, ALT vybrať časť @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Degradácia - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Návrh do Náčrtu - + Convert bidirectionally between Draft and Sketch objects Previesť obojsmerne medzi Návrhom a Náčrt objektov @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Kreslenie - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Upraviť - + Edits the active object Upraviť aktívny objekt @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Dokončiť čiaru - + Finishes a line without closing it Ukončiť čiaru bez jej uzatvorenia @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line čiara - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Vytvoriť 2-bodovú čiaru. CTRL uchopiť, SHIFT obmedziť @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Mirror - + Mirrors the selected objects along a line defined by two points Mirrors the selected objects along a line defined by two points @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Presunúť - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Odsadenie - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Odsadí aktívny objekt. CTRL pre prichytenie, SHIFT pre obmedzenie, ALT pre kopírovanie @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Bod - + Creates a point object Vytvor bodový objekt @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygón - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Vytvára pravidelný polygón. CTRL prichytiť, SHIFT obmedziť @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Obdĺžnik - + Creates a 2-point rectangle. CTRL to snap Vytvorí 2-bodový obdĺžnik. CTRL pre uchopenie @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Otočiť - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Otočí vybraté objekty. CTRL pre prichytenie, SHIFT pre obmedzenie, ALT vytvorí kópiu @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Škála, zmena veľkosti - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Zmení veľkosť vybratých objektov zo základného bodu. CTRL pre prichytenie, SHIFT pre obmedzenie, ALT pre kopírovanie @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Vyberte skupinu - + Selects all objects with the same parents as this group Vyberie všetky objekty s rovnakými rodičmi ako má táto skupina @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Vybrať rovinu - + Select a working plane for geometry creation Vyberať pracovnú rovinu na vytvorenie geometrie @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Tvary 2D - + Creates Shape 2D views of selected objects Vytvorí 2D pohľady vybratých objektov @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Vytvorí textový reťazec z tvarov. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Uhly - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Rozmery - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Koncový bod - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Rozšírenie - + Snaps to extension of edges Snaps to extension of edges @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Mriežka - + Snaps to grid points Snaps to grid points @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Priesečník - + Snaps to edges intersections Snaps to edges intersections @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once - + Lock Lock @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Súbežne - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Kolmo - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Špeciálne - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Pracovná rovina - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Roztiahnuť - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Vytvorí poznámky. CTRL na prichytenie @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Prepnúť režim konštrukcie pre ďalšie objekty. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Prepne mód Pokračovania na ďalšie príkazy. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Prepnúť režim zobrazenia - + Swaps display mode of selected objects between wireframe and flatlines Prepína režim zobrazenia vybratých objektov medzi drôtovým modelom a plochami @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Toggle Grid - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid Mriežka - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Orezať/Rozšíriť - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Odreže alebo rozširuje vybraný objekt alebo vysunie jednotlivé plochy. CTRL zachytiť, SHIFT obmedziť na aktuálny alebo na Normálny segment, ALT invertovať @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Vrátiť späť posledný segment - + Undoes the last drawn segment of the line being drawn Vrátiť späť posledný segment rozpracovanej čiary @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Aktualizácia - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - Návrhová krivka + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Vytvára viacbodovú Návrhovú Krivku (Návrhová Krivka). CTRL bude prichytávať, SHIFT obmedzovať + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Všeobecné nastavenie návrhu - + This is the default color for objects being drawn while in construction mode. Toto je predvolená farba pre kreslené objekty počas počas konštrukčného módu. - + This is the default group name for construction geometry Toto je predvolený názov konštrukčnej geometrie - + Construction Konštrukcia @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainUložiť aktuálnu farbu a šírku čiary okolo relácie - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Ak je toto začiarknuté, bude uchovaný režim kopírovania, inak budú príkazy spúšťané v móde ne-kopírovať - + Global copy mode Všeobecný mód kopírovania - + Default working plane Predvolená pracovná rovina - + None Žiadny - + XY (Top) XY (hore) - + XZ (Front) XZ (Predok) - + YZ (Side) YZ (Bok) @@ -1988,12 +2023,12 @@ napríklad "Arial:Bold" Základné nastavenia - + Construction group name Názov Konštrukčnej skupiny - + Tolerance Tolerancia @@ -2018,22 +2053,22 @@ napríklad "Arial:Bold" Tu môžete určiť adresár obsahujúci SVG súbory obsahujúce definície <šablóna>, ktoré môžu byť pridané medzi štandardné šrafovacie vzory Návrhu - + Draft interface mode Režim rozhrania Návrhu - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Toto je UI režim, v ktorom bude modul Návrhu pracovať: Panel nástrojov premietne všetky nastavenia Návrhu do samostatných Panelov nástrojov dovtedy, pokiaľ bude FreeCAD používať systém Zobrazenia úloh pre všetky užívateľské interakcie - + Toolbar Panel nástrojov - + Taskview Zobrazenie úloh @@ -2063,12 +2098,12 @@ napríklad "Arial:Bold" ALT mód - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normálne sú po kopírovaní vybraté kópie. Ak vyberiete túto možnosť, budú namiesto nich vyberané pôvodné objekty. - + Select base objects after copying Po kopírovaní vyberať základné objekty @@ -2103,7 +2138,7 @@ napríklad "Arial:Bold" Hlavné čiary budú hrubšie. Určite koľko štvorcov bude medzi hlavnými čiarami. - + Internal precision level Úroveň internej precíznosti @@ -2218,12 +2253,12 @@ napríklad "Arial:Bold" Translate white line color to black - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2243,12 +2278,7 @@ napríklad "Arial:Bold" Always snap (disable snap mod) - - Construction geometry - Konštrukčná geometria - - - + Construction geometry color Construction geometry color @@ -2388,7 +2418,7 @@ napríklad "Arial:Bold" Select a font file - + Fill objects with faces whenever possible Fill objects with faces whenever possible @@ -2678,7 +2708,7 @@ napríklad "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2717,7 +2747,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2797,17 +2827,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2887,12 +2907,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2903,693 +2923,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Zavrieť + + + + O + O + + + + Copy + Kópia + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Dĺžka + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Draft creation tools - - - - Draft modification tools - Draft modification tools - - - - Utilities - Utilities - - - - Wire tools - Drôtové nástroje - - - - Snapping - Snapping - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Aplikovať na vybrané objekty - + Autogroup off Autogroup off - + active command: aktívny príkaz: - + None Žiadny - + Active Draft command Aktívny príkaz návrhu - + X coordinate of next point X-ová súradnica ďalšieho bodu - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-ová súradnica ďalšieho bodu - + Z coordinate of next point Z-ová súradnica ďalšieho bodu - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length Dĺžka - + Angle Uhol - + Length of current segment Length of current segment - + Angle of current segment Angle of current segment - + Radius Polomer - + Radius of Circle Polomer kruhu - + If checked, command will not finish until you press the command button again Ak je začiarknuté, príkaz sa neskončí kým znova nestlačíte tlačítko - + If checked, an OCC-style offset will be performed instead of the classic offset Ak je začiarknuté, tak sa namiesto klasického použije OCC štýl odchýlky - + &OCC-style offset &OCC-štýl odchýlky - + Add points to the current object Pridá body do aktuálneho objektu - + Remove points from the current object Odstráni body z aktuálneho objektu - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Strany - + Number of sides Počet strán - + Offset Odsadenie - + XY (top) XY (top) - - Select XY plane - Vybrať rovinu XY - - - + XZ (front) XZ (front) - - Select XZ plane - Vybrať rovinu XZ - - - + YZ (side) YZ (side) - - Select YZ plane - Vybrať rovinu YZ - - - + View Pohľad - - Select plane perpendicular to the current view - Vyberte rovinu kolmú na aktuálny pohľad - - - + Auto Auto - - Do not project points to a drawing plane - Nepremietať body do kresliacej roviny - - - + Text string to draw Text string to draw - + String Reťazec - + Height of text Výška textu - + Height Výška - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing Rozostup mriežky - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Vybrať rovinu - - - + Line čiara - + DWire Návrhová krivka - + Circle Kružnica - + Center X Stredové X - + Arc Oblúk - + Point Bod - + Label Label - + Distance Vzdialenosť - + Trim Odrezať - + Pick Object Vybrať objekt - + Edit Upraviť - + Global X Globálna os X - + Global Y Globálna os Y - + Global Z Globálna os Z - + Local X Lokálna os X - + Local Y Lokálna os Y - + Local Z Lokálna os Z - + Invalid Size value. Using 200.0. Neplatná hodnota veľkosti. Použije sa 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Vyberte súbor obsahujúci písmo - + Please enter a font file. Zadajte súbor obsahujúci písmo. - + Autogroup: Autogroup: - + Faces Predné strany - + Remove Odstrániť - + Add Pridať - + Facebinder elements Facebinder elements - + Create Line Create Line - - Pick next point: - - Vyberte daľší bod: - - - + Convert to Wire Convert to Wire - + BSpline B-Čiara - + BezCurve BezCurve - + Create BezCurve Vytvoriť Bézierovu krivku - + Rectangle Obdĺžnik - + Create Plane Create Plane - + Create Rectangle Vytvorte obdĺžnik - + Create Circle Vytvoriť kruh - + Create Arc Vytvoriť oblúk - + Start Angle Úvodný uhol - + Aperture Clona - + Polygon Polygón - + Create Polygon Vytvoriť mnohouholník - + Ellipse Elipsa - + Create Ellipse Create Ellipse - + Text Text - + Create Text Vytvoriť Text - + Dimension Kóta - + Create Dimension Vytvoriť rozmer - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Kópia - + Move Presunúť - + Change Style Zmeniť štýl - + Rotate Otočiť - - Cannot offset this object type - - Tento typ objektu sa nedá odsadiť - - - + Stretch Roztiahnuť - + Upgrade Aktualizácia - + Downgrade Degradácia - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch Konvertovať na náčrt - + Convert to Draft Konvertovať na návrh - + Convert Konvertovať - + Array Pole - + Create Point Create Point - + Mirror Mirror - + &Draft &Draft @@ -3613,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Zavrieť @@ -3830,7 +3998,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3845,7 +4013,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3860,454 +4028,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Dokončiť - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Predvolené - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4317,56 +4310,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Škála, zmena veľkosti - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Zhora + + + + Front + Predok + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Draft + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilities + + + + Wire tools + Drôtové nástroje + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 4cd49bc55e..95e25d16c0 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index e01eea1f89..9b54fbab17 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Določa vzorec črtkanja - + Sets the size of the pattern Nastavi velikost vzorca - + Startpoint of dimension Začetna točka mere - + Endpoint of dimension Končna točka mere - + Point through which the dimension line passes Točka, skozi katero teče kotirna črta - + The object measured by this dimension Predmet, ki je izmerjen s to kotnico - + The geometry this dimension is linked to Geometrija, s katero je povezana ta mera - + The measurement of this dimension Meritev te mere - + For arc/circle measurements, false = radius, true = diameter Za meritve lokov/krogov je false = polmer, true = premer - + Font size Velikost pisave - + The number of decimals to show Število prikazanih decimalk - + Arrow size Velikost puščic - + The spacing between the text and the dimension line Razmik med kotirno črto in besedilom - + Arrow type Vrsta puščic - + Font name Ime pisave - + Line width Širina črte - + Line color Barva črt - + Length of the extension lines Dolžina pomožnih kotirnih črt - + Rotate the dimension arrows 180 degrees Zavrti puščice za 180° - + Rotate the dimension text 180 degrees Zavrti besedilo mere za 180° - + Show the unit suffix Prikaži pripono enote - + The position of the text. Leave (0,0,0) for automatic position Položaj besedila. Pustite (0,0,0) za samodejno poravnavo - + Text override. Use $dim to insert the dimension length Preglasitev besedila. Uporabite $dim za vstavitev dolžine mere - + A unit to express the measurement. Leave blank for system default Enote mere. Pustite prazno za sistemsko privzeto - + Start angle of the dimension Začetni kot mere - + End angle of the dimension Kočni kot mere - + The center point of this dimension Središčna točka te mere - + The normal direction of this dimension Normalna smer te mere - + Text override. Use 'dim' to insert the dimension length Preglasitev besedila. Uporabite 'dim' za vstavitev dolžine mere - + Length of the rectangle Dolžina pravokotnika - + Radius to use to fillet the corners Polmer zaokrožitev robov - + Size of the chamfer to give to the corners Velikost posnetja robov - + Create a face Ustvari ploskev - + Defines a texture image (overrides hatch patterns) Določa sliko teksture (povozi vzorce črtkanja) - + Start angle of the arc Začetni kot loka - + End angle of the arc (for a full circle, give it same value as First Angle) Končni kot loka ( za poln krog je vrednost enaka začetnemu kotu) - + Radius of the circle Polmer kroga - + The minor radius of the ellipse Mali polmer elipse - + The major radius of the ellipse Veliki polmer elipse - + The vertices of the wire Oglišča črtovja - + If the wire is closed or not Če je črtovje sklenjeno ali ne - + The start point of this line Začetna točka te črte - + The end point of this line Končna točka te črte - + The length of this line Dolžina te črte - + Create a face if this object is closed Ustvari ploskev, če je ta predmet sklenjen - + The number of subdivisions of each edge Število razdelitev vsakega roba - + Number of faces Število ploskev - + Radius of the control circle Polmer nadzornega kroga - + How the polygon must be drawn from the control circle Način risanja mnogokotnika iz nadzornega kroga - + Projection direction Smer projekcije - + The width of the lines inside this object Debelina črt znotraj tega predmeta - + The size of the texts inside this object Velikost pisave znotraj predmeta - + The spacing between lines of text Razmik med vrsticami besedila - + The color of the projected objects Barva preslikanih predmetov - + The linked object Povezani predmet - + Shape Fill Style Slog zapolnjevanja oblike - + Line Style Slog črt - + If checked, source objects are displayed regardless of being visible in the 3D model Kadar obkljukano, izvori predmetov so prikazani ne glede na to ali so vidni v 3D modelu - + Create a face if this spline is closed Ustvari ploskev, če je ta zlepek zaprt - + Parameterization factor Faktor parametrizacije - + The points of the Bezier curve Točke Bezierjeve krivulje - + The degree of the Bezier function Stopnja Bezierjeve funkcije - + Continuity Zveznost - + If the Bezier curve should be closed or not Ali naj bo Bezierjeva krivulja zaprta - + Create a face if this curve is closed Ustvari ploskev, če je ta krivulja zaprta - + The components of this block Sestavine tega zbira - + The base object this 2D view must represent Izhodiščni predmet, ki ga mora predstavljati ta dvorazseži pogled - + The projection vector of this object Vektor preslikavanja tega predmeta - + The way the viewed object must be projected Potrebni način preslikave opazovanega predmeta - + The indices of the faces to be projected in Individual Faces mode Kazala ploskev, ki naj se projicirajo v načinu posameznih ploskev - + Show hidden lines Prikaži skrite črte - + The base object that must be duplicated Izhodiščni predmet, ki ga je treba podvojiti - + The type of array to create Vrsta razpostavitve, ki naj se ustvari - + The axis direction Smer osi - + Number of copies in X direction Število kopij v smeri X - + Number of copies in Y direction Število kopij v smeri Y - + Number of copies in Z direction Število kopij v smeri Z - + Number of copies Število kopij - + Distance and orientation of intervals in X direction Razdalja in usmerjenost intervalov v smeri X - + Distance and orientation of intervals in Y direction Razdalja in usmerjenost intervalov v smeri Y - + Distance and orientation of intervals in Z direction Razdalja in usmerjenost intervalov v smeri Z - + Distance and orientation of intervals in Axis direction Razdalja in usmerjenost intervalov v smeri osi - + Center point Središčna točka - + Angle to cover with copies Kot, ki naj ga zapolnijo kopije - + Specifies if copies must be fused (slower) Določa, če morajo biti kopije zlite (počasneje) - + The path object along which to distribute objects Pot, vzdolž katere se razvršča predmete - + Selected subobjects (edges) of PathObj Izbrani deli predmetov (robovi) PathObj - + Optional translation vector Možnost vektorja premika - + Orientation of Base along path Usmerjenost izhodišča vzdolž poti - + X Location X Položaj - + Y Location Y Položaj - + Z Location Z Položaj - + Text string Besedilni niz - + Font file name Ime datoteke pisav - + Height of text Višina besedila - + Inter-character spacing Razmik med znaki - + Linked faces Povezane ploskve - + Specifies if splitter lines must be removed Določa, ali morajo biti delitvene črte odstranjene - + An optional extrusion value to be applied to all faces Izbirna vrednost izrivanja, ki bo uporabljena na vseh ploskvah - + Height of the rectangle Višina pravokotnika - + Horizontal subdivisions of this rectangle Vodoravna delitev tega pravokotnika - + Vertical subdivisions of this rectangle Navpična delitev tega pravokotnika - + The placement of this object Postavitev tega predmeta - + The display length of this section plane Prikazana dolžina te presečne ravnine - + The size of the arrows of this section plane Velikost puščic te presečne ravnine - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Za načine prereznic in prereznih ploskev, to pušča ploskve na mestu rezanja - + The base object is the wire, it's formed from 2 objects Izhodiščni predmet je črtovje, sestavljeno iz dveh predmetov - + The tool object is the wire, it's formed from 2 objects Orodni predmet je črtovje, sestavljeno iz dveh predmetov - + The length of the straight segment Dolžina ravnega odseka - + The point indicated by this label Točka, na katero kaže ta opisnica - + The points defining the label polyline Točke, ki določajo opisnično črto - + The direction of the straight segment Smer ravnega odseka - + The type of information shown by this label Vrsta informacij, prikazanih s to opisnico - + The target object of this label Tarčni predmet te opisnice - + The text to display when type is set to custom Besedilo za prikazovanje, ko je vrsta nastavljena na "po meri" - + The text displayed by this label Besedilo te opisnice - + The size of the text Velikost pisave - + The font of the text Vrsta pisave - + The size of the arrow Velikost puščice - + The vertical alignment of the text Navpična poravnava besedila - + The type of arrow of this label Vrsta puščice za to opisnico - + The type of frame around the text of this object Vrsta okvirja okrog besedila za ta predmet - + Text color Barva besedila - + The maximum number of characters on each line of the text box Največje število znakov v vsaki vrstici polja z besedilom - + The distance the dimension line is extended past the extension lines Dolžina podaljšanja kotirne črte preko pomožnih kotirnih črt - + Length of the extension line above the dimension line Dolžina pomožne kotirne črte preko kotirne črte - + The points of the B-spline Točke B-zlepka - + If the B-spline is closed or not Ali je B-zlepek sklenjen ali ne - + Tessellate Ellipses and B-splines into line segments Razdelji elipse in B-zlepke na ravne odseke - + Length of line segments if tessellating Ellipses or B-splines into line segments Dolžina ravnih odsekov, če se na njih razdeli elipse ali B-zlepke - + If this is True, this object will be recomputed only if it is visible Če drži, potem se ta predmet preračuna le, če je viden - + Base Osnova - + PointList Seznam točk - + Count Število - + The objects included in this clone Predmeti, vključeni v ta dvojnik - + The scale factor of this clone Količnik velikosti za ta dvojnik - + If this clones several objects, this specifies if the result is a fusion or a compound Če podvaja več predmetov, to določa ali dobite zlitje ali sestav - + This specifies if the shapes sew To določa, ali se oblike sprijemajo - + Display a leader line or not Prikaži opisnično črto ali ne - + The text displayed by this object Besedilo prikazano s tem predmetom - + Line spacing (relative to font size) Medvrstični razmik (glede na velikost pisave) - + The area of this object - The area of this object + Površina tega predmeta - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Na koncu črtovja prikaži kotirni znak - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Zlij steno s konstrukcijskimi predmeti enake vrste in snovi + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Naklon - + Scale Povečava - + Writing camera position Zapis položaja kamere - + Writing objects shown/hidden state Zapis stanja prikazanosti/skritosti predmeta - + X factor Količnik X - + Y factor Količnik Y - + Z factor Kiličnik Z - + Uniform scaling Enakomerna sprememba velikosti - + Working plane orientation Usmerjenost delavne ravnine @@ -781,20 +816,25 @@ Ročno namestite vstavek knjižnice DXF z menija Orodja -> Upravljalnik vstavkov - + This Wire is already flat To črtovje je že ravninsko - + Pick from/to points Izberi točke iz/v - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Določitev nagiba izbranim črtovjem/daljicam: 0 = vodoravno, 1 = 45stopinj navzgor, -1 = 45stopinj navzdol + + + Create a clone + Ustvari dvojnika + DraftShapeStringGui @@ -846,28 +886,28 @@ z menija Orodja -> Upravljalnik vstavkov Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Vnesite somernice ali z miško izberite točko. Reset 3d point selection - Reset 3d point selection + Ponastavi izbiranje 3d točk Reset Point - Reset Point + Ponastavi točko Draft_AddConstruction - + Add to Construction group Dodaj v skupino konstrukcije - + Adds the selected objects to the Construction group Doda izbrane predmete v skupino kostrukcije @@ -875,12 +915,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_AddPoint - + Add Point Dodaj točko - + Adds a point to an existing Wire or B-spline Doda točko obstoječemu črtovju ali B-zlepku @@ -888,12 +928,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_AddToGroup - + Move to group... Premakni v skupino... - + Moves the selected object(s) to an existing group Prestavi izbrani(e) predmet(e) v obstoječo skupino @@ -901,12 +941,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_ApplyStyle - + Apply Current Style Uporabi trenutni slog - + Applies current line width and color to selected objects Uporabi trenutno širino in barvo črte za izbrane objekte @@ -914,46 +954,46 @@ z menija Orodja -> Upravljalnik vstavkov Draft_Arc - + Arc Lok - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Ustvari lok z določitvijo središča in polmera. CTRL za pripenjanje, PREMAKNI za omejitev Draft_ArcTools - + Arc tools - Arc tools + Ločna orodja Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Lok 3 točke - + Creates an arc by 3 points - Creates an arc by 3 points + Ustvari lok z določitvijo 3 točk Draft_Array - + Array Razpostavitev - + Creates a polar or rectangular array from a selected object Ustvari krožen ali pravokoten vzorec razpostavitve izbranega predmeta @@ -961,12 +1001,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_AutoGroup - + AutoGroup Samodejna skupina - + Select a group to automatically add all Draft & Arch objects to Izberite skupino, v katero se samodejno doda vse predmete osnutka in arhitekture @@ -974,12 +1014,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_BSpline - + B-spline B-zlepek - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Ustvari večtočkovni B-zlepek. CTRL za pripenjanje in SHIFT za omejila @@ -987,12 +1027,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_BezCurve - + BezCurve Bez. krivulja - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Ustvari Bezierjevo krivuljo. Ctrl za pripenjanje, Shift za omejitev @@ -1000,20 +1040,20 @@ z menija Orodja -> Upravljalnik vstavkov Draft_BezierTools - + Bezier tools - Bezier tools + Bezierjeva orodja Draft_Circle - + Circle Krog - + Creates a circle. CTRL to snap, ALT to select tangent objects Ustvari krog. Ctrl za pripenjanje, Alt za izbiro tangentnih objektov @@ -1021,12 +1061,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_Clone - + Clone Kloniraj - + Clones the selected object(s) Podvaja izbrane predmete @@ -1034,12 +1074,12 @@ z menija Orodja -> Upravljalnik vstavkov Draft_CloseLine - + Close Line Zapri črto - + Closes the line being drawn Zapre risano črto @@ -1047,27 +1087,27 @@ z menija Orodja -> Upravljalnik vstavkov Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + KubičnaBezierKrivulja - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Ustvari kubično bezierjevo krivuljo +Kliknite in povlecite, da določite krmilne točke. CTRL za pripenjanje, SHIFT za omejitev Draft_DelPoint - + Remove Point Odstrani točko - + Removes a point from an existing Wire or B-spline Odstrani točko iz obstoječega črtovja ali B-zlepka @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Kota - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Ustvari koto. Ctrl za pripenjanje, Shift za omejilo, Alt za izbiro odseka @@ -1088,25 +1128,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Podgradi - + Explodes the selected objects into simpler objects, or subtracts faces - Razbije izbrane objete v preprostejše ali odšteje ploskve + Razbij izbrane predmete v preprostejše ali odštej ploskve Draft_Draft2Sketch - + Draft to Sketch Osnutek v očrt - + Convert bidirectionally between Draft and Sketch objects Dvosmerno pretvori med osnutkom in očrtom @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Risba - + Puts the selected objects on a Drawing sheet Postavi izbrane predmete na risalno polo @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Uredi - + Edits the active object Uredi dejaven objekt @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Uredi izboljšano - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Uredi izbrane predmete Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Ustvari elipso. Ctrl za pripenjanje @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Vezalnik ploskev - + Creates a facebinder object from selected face(s) Ustvari predmet ploskvoveznika iz izbranih ploskev @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Zaključi črto - + Finishes a line without closing it Zaključi črto brez zapiranja @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Obrni koto - + Flip the normal direction of a dimension Obrni običajno smer kote @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Popravi - + Heal faulty Draft objects saved from an earlier FreeCAD version Popravi okvarjene predmete osnutka, ki so bili shranjeni v predhodnih različicah FreeCADa @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Združi - + Joins two wires together Združi dve črtovji @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Oznaka - + Creates a label, optionally attached to a selected object or element Ustvari opisnico, ki je lahko pripeta na izbrani predmet ali enoto + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Črta - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Ustvari črto z dvema točkama. Ctrl za pripenjanje, Shift za omejitev @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Zrcali - + Mirrors the selected objects along a line defined by two points Prezrcali izbrane predmete preko črte, ki jo določata dve točki @@ -1275,38 +1323,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Premakni - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Premakne izbrane predmete med dvema točkama. CTRL za pripenjanje, SHIFT za omejitev, ALT za kopiranje Draft_Offset - + Offset Odmik - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy - Odmakne dejavni predmet. Ctrl za pripenjanje, Shift za omejila, Alt za kopiranje + Odmakne dejavni predmet. CTRL za pripenjanje, SHIFT za omejitev, ALT za kopiranje Draft_PathArray - + PathArray Črtni vzorec - + Creates copies of a selected object along a selected path. Ustvari kopije izbranih predmetov vzdolž izbrane poti. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Točka - + Creates a point object Ustvari točkovni predmet @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Razpostavitev točk - + Creates copies of a selected object on the position of points. Ustvari kopije izbranih predmetov na položaje točk. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Mnogokotnik - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Ustvari preprosti mnogokotnik. Ctrl za pripenjanje, Shift za omejitev @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Pravokotnik - + Creates a 2-point rectangle. CTRL to snap Ustvari pravokotnik z dvema točkama. Ctrl za pripenjanje @@ -1366,25 +1414,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Zavrti - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy - Zavrti izbrane objekte. Ctrl za pripenjanje, Shift za omejitev, Alt za kopiranje + Zavrti izbrane objekte. CTRL za pripenjanje, SHIFT za omejitev, ALT za kopiranje Draft_Scale - + Scale Povečava - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Poveča/Pomanjša izbrane objekte iz izhodiščne točke. Ctrl za pripenjanje, Shift za omejitev, Alt za kopiranje @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Izberi skupino - + Selects all objects with the same parents as this group Izbere vse predmete z istimi nadrejeniki kot ta skupina @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Izberi ravnino - + Select a working plane for geometry creation Izberi delovno ravnino za ustvarjanje geometrje @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Iz trenutne delavne ravnine ustvari nadomestni predmet - + Create Working Plane Proxy Ustvari nadomestni predmet delavne ravnine @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Pogled 2D oblike - + Creates Shape 2D views of selected objects Ustvari poglede 2D oblik izbranih objektov @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Oblika iz besedila … - + Creates text string in shapes. Ustvari besedilni niz v oblikah. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Prikaži vrs. pripenjanja - + Shows Draft snap toolbar Prikaže orodno vrstico za pripenjanje @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Nastavi naklon - + Sets the slope of a selected Line or Wire Nastavi naklon izbrane daljice ali črtovja @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Koti - + Snaps to 45 and 90 degrees points on arcs and circles Pripne na 45 in 90-stopinjske točke na lokih in krogih @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Središče - + Snaps to center of circles and arcs Pripne na središče krogov in lokov @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Mere - + Shows temporary dimensions when snapping to Arch objects Prikaže začasne mere ob pripenjanju na arhitekturne objekte @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Končna točka - + Snaps to endpoints of edges Pripne na končne točke robov @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Podaljšek - + Snaps to extension of edges Pripne na podaljške robov @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Mreža - + Snaps to grid points Pripne na mrežne točke @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Sečišče - + Snaps to edges intersections Pripne na sečišča robov @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Vklopi/Izklopi - + Activates/deactivates all snap tools at once Aktivira/deaktivira vsa orodja za pripenjanje naenkrat - + Lock Zakleni @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Sredina - + Snaps to midpoints of edges Pripne na sredino robov @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Bližnje - + Snaps to nearest point on edges Pripne na bližnje točke robov @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orto - + Snaps to orthogonal and 45 degrees directions Pripne na ortogonalne in 45-stopinjske smeri @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Vzporedno - + Snaps to parallel directions of edges Pripne na vzporedne smeri robov @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Pravokotno - + Snaps to perpendicular points on edges Pripne na pravokotne točke robov @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Posebno - + Snaps to special locations of objects Pripenja na določeno mesto predmetov @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Delovna ravnina - + Restricts the snapped point to the current working plane Omeji pripeto točko na trenutno delovno ravnino @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Razdeli - + Splits a wire into two wires Razcepi črtovje v dve črtovji @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Raztegni - + Stretches the selected objects Raztegne izbrane predmete @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Besedilo - + Creates an annotation. CTRL to snap Ustvari opis. Ctrl za pripenjanje @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Preklopi pomožni način za naslednje objekte. - + Toggle Construction Mode Preklapljanje med načini konstrukcije @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Preklopi neprekinjeni način - + Toggles the Continue Mode for next commands. Preklopi neprekinjeni način za naslednje ukaze. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Preklopi način prikaza - + Swaps display mode of selected objects between wireframe and flatlines Zamenja način prikaza izbranih predmetov med žičnim in črtno-senčenim modelom @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Preklopi mrežo - + Toggles the Draft grid on/off Vklopi/izklopi mrežo osnutka - + Grid Mreža - + Toggles the Draft grid On/Off Vklaplja/izklaplja mrežo osnutka @@ -1784,25 +1832,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts - Prireže ali podaljša izbrani predmet, ali izriva posamezne ploskve. Ctrl za pripenjanje, Shift za omejitev na trenutni odsek ali na normalo, Alt za obrnitev + Prireže ali podaljša izbrani predmet, ali izriva posamezne ploskve. CTRL za pripenjanje, SHIFT za omejitev na trenutni odsek ali na normalo, ALT za obrnitev Draft_UndoLine - + Undo last segment Razveljavi zadnji odsek - + Undoes the last drawn segment of the line being drawn Razveljavi zadnji narisani odsek risane črte @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Nadgradi - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Spoji izbrane predmete v enega ali pretvori sklenjena črtovja v ploskve ali združi ploskve - - Draft_VisGroup - - - VisGroup - Vidljive skupine - - - - Adds a VisGroup - Doda vidljivo skupino - - Draft_Wire - - DWire - OsČrtovje + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Ustvari večtočkovni osnutek črtovja (OsČrtovje). Ctrl za pripenjanje, Shift za omejilo + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Črtovje v B-zlepek - + Converts between Wire and B-spline Pretvarja med črtovjem in B-zlepkom @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Splošne nastavitve osnutkov - + This is the default color for objects being drawn while in construction mode. To je privzeta barva risanih predmetov v pomožnem načinu. - + This is the default group name for construction geometry To je privzeto ime skupine pomožne geometrije - + Construction Pomožni način @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainShrani trenutno barvo in debelino črt med sejami - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Če je to označeno, bo način kopiranja obdržan med ukazi, v nasprotnem primeru se bodo ukazi zagnali v načinu brez kopiranja - + Global copy mode Splošni način kopiranja - + Default working plane Privzeta delovna ravnina - + None Brez - + XY (Top) XY (Tloris) - + XZ (Front) XZ (Naris) - + YZ (Side) YZ (Stranski ris) @@ -1988,12 +2023,12 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Splošne nastavitve - + Construction group name Ime skupine pomožne geometrije - + Tolerance Toleranca @@ -2018,22 +2053,22 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Tukaj lahko navedete mapo z datotekami SVG, ki vsebujejo določila <pattern> za dodajanje k običajnim vzorcem črtkanja - + Draft interface mode Način vmesnika za osnutke - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction To je način up. vmesnika, v katerem bo deloval modul osnutkov: način orodne vrstice bo postavil vse nastavitve osnutkov v ločeno orodno vrstico, medtem ko bo način opravilne vrstice uporabil sistem pogleda opravil FreeCADa za vse posege uporabnika - + Toolbar Orodna vrstica - + Taskview Pogled opravil @@ -2063,12 +2098,12 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Sprem. Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Običajno bodo po kopiranju predmetov kopije izbrane. Če je ta možnost označena, bodo namesto tega izbrani izhodiščni predmeti. - + Select base objects after copying Po kopiranju izberi izhodiščne predmete @@ -2103,7 +2138,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Glavne črte bodo narisane debelejše. Tu navedite št. kvadratov med glavnimi črtami. - + Internal precision level Notranja raven natančnosti @@ -2218,12 +2253,12 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Pretvori bele črte v črne - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Ko je to označeno in ko je to mogoče, bodo orodja za osnutke ustvarila osnovnike delov namesto predmetov osnutka. - + Use Part Primitives when available Uporabi osnovne oblike delov, ko so na voljo @@ -2243,12 +2278,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Vedno pripni (onemogoči spremenilno tipko) - - Construction geometry - Pomožna geometrija - - - + Construction geometry color Barva pomožne geometrije @@ -2388,7 +2418,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Izberite datoteko pisave - + Fill objects with faces whenever possible Zapolni predmete s ploskvami, ko je to mogoče @@ -2678,7 +2708,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Samodejna posodobitev (samo zastareli uvozilnik) - + Prefix labels of Clones with: Predponske oznake dvojnikov z: @@ -2717,7 +2747,7 @@ Npr.: za datoteke v milimetrih: 1. v centimetrih: 10, v metrih: 1000, v palcih: To je pristop, izbran za uvoz barv predmetov SVG v FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Če je to označeno, bodo predmeti privzeto prikazani zapolnjeno, sicer pa kot žični model @@ -2797,17 +2827,7 @@ Npr.: za datoteke v milimetrih: 1. v centimetrih: 10, v metrih: 1000, v palcih: Če je to označeno, bodo predmeti istih plasti spojeni v osnutkovne zbire, kar bo pospešilo prikaz, vendar jih bo težje urejati - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Če je to označneno, bodo pri izvajanje ukazov osnutkov prikazana navodila korak za korakom - - - - Verbose command line mode - Način ukazne vrstice s podrobnim izpisom - - - + When drawing lines, set focus on Length instead of X coordinate Pri risanju daljic se osredini na dolžino namesto na sorednico X @@ -2887,711 +2907,857 @@ Npr.: za datoteke v milimetrih: 1. v centimetrih: 10, v metrih: 1000, v palcih: Največje število odsekov zlepka: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Število decimalk sorednic pri zalednih operacijah (pri 3 = 0,001). Med uporabni FreeCADA veljajo vrednosti med 6 in 8 za najboljši kompromis. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Ta vrednost pri funkcijah, ki vsebujejo dopustna odstopanja. +Vrednosti z odstopanjem, manjšim od te vrednosti bodo obravnavane kot enake. Ta vrednost bo kmalu zastarela, zato raven natančnosti zgoraj določa oboje. Use legacy python exporter - Use legacy python exporter + Uporabi zastarel izvozilnik Python + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Pomožna geometrija + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relativno + + + + R + R + + + + Continue + Nadaljuj + + + + T + T + + + + Close + Zapri + + + + O + O + + + + Copy + Kopiraj + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Polnilo + + + + L + L + + + + Exit + Izhod + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Dolžina + + + + H + H + + + + Wipe + Počisti + + + + W + W + + + + Set WP + Ponastavi DP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Omejite X + + + + X + X + + + + Restrict Y + Omejite Y + + + + Y + Y + + + + Restrict Z + Omejite Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Pripen. v osnutkih - - - Draft creation tools - Orodja za ustvarjanje osnutkov - - - - Draft modification tools - Orodja za spreminjanje osnutkov - - - - Utilities - Pripomočki - - - - Wire tools - Orodja za črtovja - - - - Snapping - Pripenjanje - draft - + not shape found ni najdenih oblik - + All Shapes must be co-planar Vse oblike morajo biti koplanarne - + The given object is not planar and cannot be converted into a sketch. Dani predmet ni ravninski in ga ni mogoče pretvoriti v očrt. - + Unable to guess the normal direction of this object Smeri normale tega predmeta ni mogoče ocenti - + Draft Command Bar Ukazna vrstica osnutkov - + Toggle construction mode Preklopi pomožni način - + Current line color Trenutna barva črt - + Current face color Trenutna barva ploskev - + Current line width Trenutna debelina črte - + Current font size Trenutna velikost pisave - + Apply to selected objects Uporabi za izbrane predmete - + Autogroup off Samodejno združevanje izklopljeno - + active command: dejaven ukaz: - + None Brez - + Active Draft command Dejaven ukaz osnutka - + X coordinate of next point Sorednica X naslednje točke - + X X - + Y Y - + Z Z - + Y coordinate of next point Sorednica Y naslednje točke - + Z coordinate of next point Sorednica Z naslednje točke - + Enter point Vnesi točko - + Enter a new point with the given coordinates Vnesi novo točko z danimi sorednicami - + Length Dolžina - + Angle Kot - + Length of current segment Dolžina trenutnega odseka - + Angle of current segment Kot trenutnega odseka - + Radius Polmer - + Radius of Circle Polmer kroga - + If checked, command will not finish until you press the command button again Če je označeno, se ukaz ne bo zaključil, dokler ponovno ne pritisnete gumba za ukaz - + If checked, an OCC-style offset will be performed instead of the classic offset Če je označeno, bo izveden odmik sloga OCC namesto klasičnega - + &OCC-style offset Odmik sloga &OCC - + Add points to the current object Dodaj točke k trenutnemu predmetu - + Remove points from the current object Odstrani točke trenutnemu predmetu - + Make Bezier node sharp Naredi Bezierjevo vozlišče ostro - + Make Bezier node tangent Naredi Bezierjevo vozlišče neprelomljeno - + Make Bezier node symmetric Naredi Bezierjevo vozlišče simetrično - + Sides Strani - + Number of sides Število strani - + Offset Odmik - + XY (top) XY (tloris) - - Select XY plane - Izberite ravnino XY - - - + XZ (front) XZ (naris) - - Select XZ plane - Izberite ravnino XZ - - - + YZ (side) YZ (stranski ris) - - Select YZ plane - Izberite ravnino YZ - - - + View Pogled - - Select plane perpendicular to the current view - Izberite ravnino, ki je pravokotna na trenutni pogled - - - + Auto Samodejno - - Do not project points to a drawing plane - Ne projeciraj točke v risalno ravnino - - - + Text string to draw Niz besedila, ki ga želite narisati - + String Niz - + Height of text Višina besedila - + Height Višina - + Intercharacter spacing Razmik med znaki - + Tracking Sledenje - + Full path to font file: Polna pot do datoteke pisave: - + Open a FileChooser for font file Odpri izbirnik datotek za datoteko pisave - + Grid spacing Razmik mreže - + The spacing between the grid lines Razmik med črtami mreže - + Main line every Glavne črte vsakih - + The number of lines between main lines Število črt med glavnimi črtami - + Center plane on view Usredišči ravnino v pogled - - Select Plane - Izberi ravnino - - - + Line Črta - + DWire OsČrtovje - + Circle Krog - + Center X Središče X - + Arc Lok - + Point Točka - + Label Oznaka - + Distance Distance - + Trim Prireži - + Pick Object Izberi predmet - + Edit Uredi - + Global X Splošen X - + Global Y Splošen Y - + Global Z Splošen Z - + Local X Lokalen X - + Local Y Lokalen Y - + Local Z Lokalen Z - + Invalid Size value. Using 200.0. Neveljavna vrednost velikosti. Uporabljeno bo 200,0. - + Invalid Tracking value. Using 0. Neveljavna vrednost sledenja. Uporabljeno bo 0. - + Please enter a text string. Vnesite besedilni niz. - + Select a Font file Izberite datoteko pisave - + Please enter a font file. Vnesite datoteko pisave - + Autogroup: Samodejno združevanje: - + Faces Ploskve - + Remove Odstrani - + Add Dodaj - + Facebinder elements Elementi vezalnika ploskev - + Create Line Ustvari črto - - Pick next point: - - Izberite naslednjo točko: - - - - + Convert to Wire Pretvori v črtovje - + BSpline B-zlepek - + BezCurve Bez. krivulja - + Create BezCurve Ustvari Bezierjevo krivuljo - + Rectangle Pravokotnik - + Create Plane Ustvari ravnino - + Create Rectangle Ustvari pravokotnik - + Create Circle Ustvari krog - + Create Arc Ustvari lok - + Start Angle Začetni kot - + Aperture Odprtina - + Polygon Mnogokotnik - + Create Polygon Ustvari mnogokotnik - + Ellipse Elipsa - + Create Ellipse Ustvari elipso - + Text Besedilo - + Create Text Ustvari besedilo - + Dimension Kota - + Create Dimension Ustvari mero - + ShapeString Besedilna oblika - + Create ShapeString Ustvari besedilno obliko - + Copy Kopiraj - + Move Premakni - + Change Style Spremeni slog - + Rotate Zavrti - - Cannot offset this object type - - Te vrste predmeta ni mogoče odmakniti - - - - + Stretch Raztegni - + Upgrade Nadgradi - + Downgrade Podgradi - + Selection is not a Knot Izbira ni vozel - + Convert to Sketch Pretvori v očrt - + Convert to Draft Pretvori v osnutek - + Convert Pretvori - + Array Razpostavitev - + Create Point Ustvari točko - + Mirror Zrcali - + &Draft &Osnutek @@ -3615,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer. Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. - + Draft.makeBSpline: not enough points Draft.makeBSpline: ni dovolj točk - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: isti krajni točki sta bili prisilno sklenjeni - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: neveljaven seznam točk - + No object given Nobenega podanega predmeta - + The two points are coincident Točki sovpadata - + Found groups: closing each open object inside Najdene skupine: zapiranje vseh notranjih odprtih predmetov - + Found mesh(es): turning into Part shapes Najdeno(a) ploskovje(a): spreminjanje v dele - + Found 1 solidifiable object: solidifying it Najden 1 predmet, ki ga je mogoče spremeniti v telo: spreminjanje - + Found 2 objects: fusing them Najdena 2 predmeta: zlivanje - + Found several objects: creating a shell Najdenih več predmetov: ustvarjanje lupine - + Found several coplanar objects or faces: creating one face Najdenih več koplanarnih predmetov ali ploskev: ustvarjanje ene ploskve - + Found 1 non-parametric objects: draftifying it Najden 1 nenastavljiv predmet: spreminjanje v osnutek - + Found 1 closed sketch object: creating a face from it Najden 1 sklenjen očrt: ustvarjanje ploskve - + Found 1 linear object: converting to line Najden 1 premi predmet: pretvarjanje v daljico - + Found closed wires: creating faces Najdena sklenjena črtovja: ustvarjanje ploskev - + Found 1 open wire: closing it Najdeno 1 nesklenjeno črtovje: sklepanje - + Found several open wires: joining them Najdenih več nesklenjenih črtovij: spajanje - + Found several edges: wiring them Najdenih več robov: pretvarjanje v žico - + Found several non-treatable objects: creating compound Najdenih več nepopravljivih predmetov: ustvarjanje sestava - + Unable to upgrade these objects. Teh predmetov ni mogoče nadgraditi. - + Found 1 block: exploding it Najden 1 zbir: razbijanje - + Found 1 multi-solids compound: exploding it Najden 1 večtelesen sestav: razbijanje - + Found 1 parametric object: breaking its dependencies Najden 1 nastavljiv predmet: odstranjevanje njegovih odvisnosti - + Found 2 objects: subtracting them Najdena 2 predmeta: odštevanje - + Found several faces: splitting them Najdenih več ploskev: razcepljanje - + Found several objects: subtracting them from the first one Najdenih več predmetov: odštevanje od prvega - + Found 1 face: extracting its wires Najdena 1 ploskev: izluščenje črtovij - + Found only wires: extracting their edges Najdena le črtovja: izvluščenje njihovih robov - + No more downgrade possible Ni več možnih pretvorb v enostavnejše predmete - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: sklenjena z isto prvo/zadnjo točko. Geometrija ni bila posodobljena. - + No point found Ni mogoče najti nobene točke - + ShapeString: string has no wires Besedilna oblika: niz je brez črtovij - + Relative Relativno - + Continue Nadaljuj - + Close Zapri @@ -3832,7 +3998,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Omejite Z - + Select edge Izberite rob @@ -3847,7 +4013,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Dolžinski način - + Wipe Počisti @@ -3862,513 +4028,636 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Menjavanje predmeta pripenjanja - + Check this to lock the current angle Označite, če želite zakleniti trenutni kot - + Coordinates relative to last point or absolute Sorednice glede na zadnjo točko ali absolutne - + Filled Zapolnjeno - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Označite, če želite, da se predmet prikaže zapolnjeno, sicer bo prikazan kot žični model - - - + Finish Končaj - + Finishes the current drawing or editing operation Zaključi trenutno risanje ali urejanje - + &Undo (CTRL+Z) &Razveljavi (CTRL+Z) - + Undo the last segment Razveljavi zadnji odsek - + Finishes and closes the current line Zaključi in sklene trenutno črto - + Wipes the existing segments of this line and starts again from the last point Izbriše obstoječe odseke tega črtovja in začne iz zadnje točke - + Set WP Ponastavi DP - + Reorients the working plane on the last segment Prilagodi delavno ravnino glede na zadnji odsek - + Selects an existing edge to be measured by this dimension Izbere obstoječi rob za izmero s to kotnico - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Če je označeno, se predmete kopira namesto premika. Lastnosti -> Osnutek -> Splošni način kopiranja, da ohranite ta način pri sledečih ukazih - - options - možnosti - - - + Default Privzeti - + Pick a face to define the drawing plane Izberite ploskev, da določite delavno ravnino - - First point: - Prva točka: - - - - Closing - Zapiranje - - - + Create Wire Ustvarite črtovje - - Removing last point - Odstranjevanje zadnje točke - - - - Next point: - Naslednja točka: - - - - Restarting from - Ponovni začetek iz - - - + Unable to create a Wire from selected objects Črtovja iz izbranih predmetov ni bilo mogoče ustvariti - + Spline has been closed Zlepek je bil sklenjen - + Last point has been removed Zadnja točka je bila odstranjena - - Pick next point, or Finish (shift-F) or close (o): - Izberite naslednjo točko ali zaključite (shift-F) ali pa sklenite (o): - - - + Create B-spline Ustvari B-zlepek - + Bezier curve has been closed Bezierjeva krivulja je bila sklenjena - - Pick first point: - Izberite prvo točko: - - - - Pick opposite point: - Izberite nasprotno točko: - - - - Pick center point: - Izberite središče: - - - - Pick radius: - Izberite polmer: - - - - Pick start angle: - Izberite začetni kot: - - - - Pick aperture: - Izberite središčni kot: - - - - Aperture angle: - Središčni kot: - - - - Pick location point: - Izberite točko položaja: - - - + Edges don't intersect! Robovi se ne sekajo! - + Pick ShapeString location point: Izberite točko postavitve besedilne oblike: - + Select an object to move Izberite predmet za premik - - Pick start point: - Izberite začetno točko: - - - - Pick end point: - Izberite končno točko: - - - + Select an object to rotate Izberite predmet za sukanje - - Pick rotation center: - Izberite središče vrtenja: - - - - Pick base angle: - Izberite izhodiščni kot: - - - - Pick rotation angle: - Izberite kot vrtenja: - - - + Select an object to offset Izberite predmet za odmikanje - + Offset only works on one object at a time Odmikanje deluje le ne enem predmetu naenkrat - + Sorry, offset of Bezier curves is currently still not supported Zamik Bezierjevih krivulj še vedno ni podprt - - Pick distance: - Izberite razdaljo: - - - + Select an object to stretch Izberite predmet za raztegovanje - - Pick first point of selection rectangle: - Izberite prvo točko izbirnega pravokotnika: - - - - Pick opposite point of selection rectangle: - Izberite nasprotno točko izbirnega pravokotnika: - - - - Pick start point of displacement: - Izberite začetno točko prestavljanja: - - - - Pick end point of displacement: - Izberite končno točko prestavljanja: - - - + Turning one Rectangle into a Wire Pretvori pravokotnik v črtovje - + Select an object to join Izberite predmet za združevanje - + Join Združi - + Select an object to split Izbrite predmet, ki ga želite razcepiti - + Select an object to upgrade Izberite predmet, ki ga želite posodobiti - + Select object(s) to trim/extend Izberite predmet(e) za prirezovanje/podaljšanje - + Unable to trim these objects, only Draft wires and arcs are supported Teh predmetov ni mogoče prirezati, le črtovja osnutka in loki imajo to možnost - + Unable to trim these objects, too many wires Ni mogoče prirezati teh predmetov, preveč črtovij - + These objects don't intersect Ti predmeti se ne sekajo - + Too many intersection points Preveč presečišč - + Select an object to scale Izberite predmet za spreminjanje velikosti - - Pick base point: - Izberite izhodišče: - - - - Pick reference distance from base point: - Izberite primerjalno dolžino od izhodišča: - - - - Pick new distance from base point: - Izberite novo dolžino od izhodišča: - - - + Select an object to project Izberite predmet za preslikavanje - - This object type is not editable - Te vrste predmetov ni mogoče urejati - - - + Please select only one object Izberite le en predmet - + Select a Draft object to edit Za urejanje izberite predmet očrta - + Active object must have more than two points/nodes Dejavni predmet mora imeti več kot dve točki/vozlišči - + Endpoint of BezCurve can't be smoothed Končne točke Bezierjeve krivulje ni mogoče zgladiti - + Select an object to convert Izberit predmet za pretvorbo - + Select an object to array Izberite predmet za razpostavljanje - + Please select base and path objects Izberite izhodiščni predmet in pot - + Please select base and pointlist objects Izberite izhodiščni predmet in seznam točk - + Select an object to clone Izberite predmet za podvjajanje - + Select face(s) on existing object(s) Izberite ploskve na obstoječih predmetih - + Select an object to mirror Izberite predmet za zrcaljenje - - Pick start point of mirror line: - Izberite začetno točko črte zrcaljenja: - - - - Pick end point of mirror line: - Izberite končno točko črte zrcaljenja: - - - + This tool only works with Wires and Lines To orodje deluja samo z Žicami in Črtami - - - Pick target point: - Izberite ciljno točko: - - - - Pick endpoint of leader line: - Izberite končno točko opisnične črte: - - - - Pick text position: - Določite položaj besedila: - ODA (formerly Teigha) File Converter not found, DWG support is disabled Pretvornika datotek ODA (predhodno Teigha) ni mogoče najti, podpora za DWG je onemogočena - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s si deli podlogo še s %d drugimi predmeti. Označite, če želite to spremeniti. Subelement mode - Subelement mode + Način podprvine - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Preklopi med urejanjem polmera in kota loka - + Modify subelements - Modify subelements + Preoblikuj podprvine - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Če je označeno, bodo namesto celotnega predmeta preoblikovane le podprvine - + CubicBezCurve - CubicBezCurve + KubičnaBezierKrivulja - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Nekaterih podprvin ni bilo mogoče premakniti. - + Scale Povečava - + Some subelements could not be scaled. - Some subelements could not be scaled. + Nekaterih podprvin ni bilo mogoče prevelikostiti. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + Izhodiščni očrt stene je prezapleten za urejanje: predlaga se neposredno urejanje očrta + + + + Top + Zgoraj + + + + Front + Spredaj + + + + Side + Stran + + + + Current working plane + Trenutna delovna ravnina + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Avtomatsko + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotacija + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Izberite predmet, ki ga želite urejati + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Ugrez + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Pripomočki + + + + Wire tools + Orodja za črtovja + + + + Snapping + Pripenjanje diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index cd3004c304..ae23f4ff2a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 794d354ed5..f573d04e34 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Defines a hatch pattern - + Sets the size of the pattern Поставља величину узоркa - + Startpoint of dimension Startpoint of dimension - + Endpoint of dimension Endpoint of dimension - + Point through which the dimension line passes Point through which the dimension line passes - + The object measured by this dimension The object measured by this dimension - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter For arc/circle measurements, false = radius, true = diameter - + Font size Величина фонта - + The number of decimals to show The number of decimals to show - + Arrow size Arrow size - + The spacing between the text and the dimension line The spacing between the text and the dimension line - + Arrow type Arrow type - + Font name Font name - + Line width Ширина линије - + Line color Line color - + Length of the extension lines Length of the extension lines - + Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees - + Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default A unit to express the measurement. Leave blank for system default - + Start angle of the dimension Start angle of the dimension - + End angle of the dimension End angle of the dimension - + The center point of this dimension The center point of this dimension - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Length of the rectangle - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Create a face - + Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) - + Start angle of the arc Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle Radius of the circle - + The minor radius of the ellipse The minor radius of the ellipse - + The major radius of the ellipse The major radius of the ellipse - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line The start point of this line - + The end point of this line The end point of this line - + The length of this line The length of this line - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Number of faces - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text The spacing between lines of text - + The color of the projected objects The color of the projected objects - + The linked object The linked object - + Shape Fill Style Shape Fill Style - + Line Style Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Прикажи невидљиве линије - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Number of copies Number of copies - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Location - + Y Location Y Location - + Z Location Z Location - + Text string Text string - + Font file name Font file name - + Height of text Виcина текcта - + Inter-character spacing Inter-character spacing - + Linked faces Linked faces - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object Положај овог објекта - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base База - + PointList PointList - + Count Број - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale увеличај/умањи - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Create a clone + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Додај тачку - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Примени Тренутни стил - + Applies current line width and color to selected objects Примена текуће ширине и боје линије на одабране објекте @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Лук - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array Распоред - + Creates a polar or rectangular array from a selected object Creates a polar or rectangular array from a selected object @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup AutoGroup - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle Круг - + Creates a circle. CTRL to snap, ALT to select tangent objects Креира круг. 'CTRL' за контролисано везивање, 'ALT' да бисте изабрали објекте тангенте @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Клон - + Clones the selected object(s) Клонира одабрани објекат/те @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Затвори линију - + Closes the line being drawn Затвара линију која се црта @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Уклони тачку - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Димензија - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Креира димензију. 'CTRL' контролисано одскочи, SHIFT да ограничи, ALT да бисте изабрали сегмент @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade умањити - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Нацрт у Cкицу - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Цртеж - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Измени - + Edits the active object Мења активни објекат @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Елипса - + Creates an ellipse. CTRL to snap Формира елипcу. CTRL да прикачиш @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Завршна линија - + Finishes a line without closing it Завршава линију без затварања @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Исцели - + Heal faulty Draft objects saved from an earlier FreeCAD version Исцели неисправан цртеж сачуван у ранијој верзији FreeCAD-a @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Линија - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Прави линију на основу 2 тачке. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Огледало - + Mirrors the selected objects along a line defined by two points Пресликава изабране објекте дуж линије одређене двема тачкама @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Премести - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Померај - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Ставара умношке изабраног објекта на изабраној путањи. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Тачка - + Creates a point object Креира тачку објекта @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Многоугао - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Креира многоугао. CTRL за везивање, SHIFT за ограничавање @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Правоугаоник - + Creates a 2-point rectangle. CTRL to snap Прави правоугаоник уз помоћ 2 тачке. 'CTRL' за везивање @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Ротирати - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Ротира одабране предмет. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи, 'ALT' креира копију @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale увеличај/умањи - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Увеличава/смањује изабране објекте из основне тачке. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи, 'ALT' да копирате @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Одабери групу - + Selects all objects with the same parents as this group Одабире све објекте са истим родитељима за ову групу @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Изабери раван - + Select a working plane for geometry creation Изаберите радну површину за стварање геометрије @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D приказ облика - + Creates Shape 2D views of selected objects Cтвара 2D поглед одабраних објеката @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Облик из текcта... - + Creates text string in shapes. Creates text string in shapes. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Углови - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Центар - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Димензије - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Крајња тачка - + Snaps to endpoints of edges Поравнај са крајњим тачкама ивица @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Додатак - + Snaps to extension of edges Поравнај са продужетком ивица @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Мрежа - + Snaps to grid points Поравнај са мрежним тачкама @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Преcек - + Snaps to edges intersections Snaps to edges intersections @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once - + Lock Lock @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Средишња тачка - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Најближи - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Паралелно - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Управан - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Радна раван - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Текст - + Creates an annotation. CTRL to snap Прави коментар. 'CTRL' да контролисано одскочи @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Мења стање режима изградње за наредне објекте. - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode for next commands. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Мењај режим приказа - + Swaps display mode of selected objects between wireframe and flatlines Swaps display mode of selected objects between wireframe and flatlines @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Toggle Grid - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid Мрежа - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Поништи последњи сегмент - + Undoes the last drawn segment of the line being drawn Опозив последњег нацртаног сегмента линије која се црта @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Надоградња - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - Д-жица + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Опште поставке Нацрта - + This is the default color for objects being drawn while in construction mode. Ово је подразумевана боја за цртање објеката док сте у режиму изградње. - + This is the default group name for construction geometry Ово је подразумевано име групе за геометрију изградње - + Construction Конструкција @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainСачувај тренутну боју и дебљину линије кроз више 'сесија' - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Ако је ово означено, режим копирања ће бити сачуван кроз команду, у супротном ће команде увек почети у режиму без копирања - + Global copy mode Свеопшти режим копирања - + Default working plane Подразумевана радна површина - + None Ниједан - + XY (Top) 'XY' (врх) - + XZ (Front) 'XZ' (предњи) - + YZ (Side) 'YZ' (Са стране) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Општа подешавања - + Construction group name Construction group name - + Tolerance Толеранција @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns - + Draft interface mode Сучеље режима Нацрт - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction - + Toolbar Алатна трака - + Taskview Преглед задатака @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - + Select base objects after copying Одабери објекте темеља након копирања @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Mainlines will be drawn thicker. Specify here how many squares between mainlines. - + Internal precision level Internal precision level @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Преведи боју беле линије у црну - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Always snap (disable snap mod) - - Construction geometry - Конcтрукциона геометрија - - - + Construction geometry color Боја конcтрукционе геометрије @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Одабери датотеку фонта - + Fill objects with faces whenever possible Попуни објекте cа површима кад год је могуће @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2714,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2794,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2884,12 +2904,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,694 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Zatvori + + + + O + O + + + + Copy + Умножи + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Дужина + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + 'X' + + + + Restrict Y + Restrict Y + + + + Y + 'Y' + + + + Restrict Z + Restrict Z + + + + Z + 'Z' + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Алати за прављење нацрта - - - - Draft modification tools - Алати за модификацију нацрта - - - - Utilities - Кориcни алати - - - - Wire tools - Алати за Жицу - - - - Snapping - Snapping - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Нацрт Командна трака - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Примени на изабране објекте - + Autogroup off Autogroup off - + active command: активне команде: - + None Ниједан - + Active Draft command Активна команда нацрта - + X coordinate of next point 'X' координата следеће тачке - + X 'X' - + Y 'Y' - + Z 'Z' - + Y coordinate of next point 'Y' координата следеће тачке - + Z coordinate of next point 'Z' координата следеће тачке - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length Дужина - + Angle Угао - + Length of current segment Length of current segment - + Angle of current segment Angle of current segment - + Radius Полупречник - + Radius of Circle Полупречник круга - + If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset &OCC-style offset - + Add points to the current object Додај тачке актуелном објекту - + Remove points from the current object Обриши тачке из актуелног објекта - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Стране - + Number of sides Број страна - + Offset Померај - + XY (top) XY (top) - - Select XY plane - Изаберите 'XY' равaн - - - + XZ (front) XZ (front) - - Select XZ plane - Изаберите 'XZ' раван - - - + YZ (side) YZ (side) - - Select YZ plane - Изаберите 'YZ' равaн - - - + View Приказ - - Select plane perpendicular to the current view - Изаберите раван нормалну у односу на тренутни приказ - - - + Auto Аутоматски - - Do not project points to a drawing plane - Немојте пројектовати тачке на раван цртања - - - + Text string to draw Text string to draw - + String Нит - + Height of text Виcина текcта - + Height Висина - + Intercharacter spacing Intercharacter spacing - + Tracking Праћење - + Full path to font file: Цео пут до датотеке фонта: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing Размак координантне мреже - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - Изаберите раван - - - + Line Линија - + DWire Д-жица - + Circle Круг - + Center X Центар 'X' - + Arc Лук - + Point Тачка - + Label Label - + Distance Distance - + Trim Trim - + Pick Object Изаберите објекат - + Edit Измени - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Одабери датотеку Фонта - + Please enter a font file. Молим, унеcите датотеку фонта. - + Autogroup: Autogroup: - + Faces Површи - + Remove Obriši - + Add Додај - + Facebinder elements Facebinder elements - + Create Line Нацртај линију - - Pick next point: - - Изаберите следећу тачку: - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Create BezCurve - + Rectangle Правоугаоник - + Create Plane Направи Раван - + Create Rectangle Креирај правоугаоник - + Create Circle Нацртај круг - + Create Arc Креирај лук - + Start Angle Почетни угао - + Aperture Отвор - + Polygon Многоугао - + Create Polygon Нацртај многоугао - + Ellipse Елипса - + Create Ellipse Направ Елипcу - + Text Текст - + Create Text Креирај текст - + Dimension Димензија - + Create Dimension Одреди димензије - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Умножи - + Move Премести - + Change Style Промени Стил - + Rotate Ротирати - - Cannot offset this object type - - Cannot offset this object type - - - - + Stretch Stretch - + Upgrade Надоградња - + Downgrade умањити - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch Пребаци у скицу - + Convert to Draft Пребаци у нацрт - + Convert Пребаци - + Array Распоред - + Create Point Нацртај тачку - + Mirror Огледало - + &Draft &Нацрт @@ -3611,179 +3778,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close Zatvori @@ -3828,7 +3995,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Select edge @@ -3843,7 +4010,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Wipe @@ -3858,454 +4025,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Заврши - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default Подразумевано - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4315,56 +4307,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale увеличај/умањи - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Горе + + + + Front + Front + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Цртеж + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Кориcни алати + + + + Wire tools + Алати за Жицу + + + + Snapping + Snapping + diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index 74931541b5..926d6947c6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 55f8da0caf..a87441316e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Definierar ett luckmönster - + Sets the size of the pattern Anger storleken på mönstret - + Startpoint of dimension Startpunkten för dimensionen - + Endpoint of dimension Slutpunkten för dimensionen - + Point through which the dimension line passes Punkt genom vilken dimensionslinjen passerar - + The object measured by this dimension Objektet mätt med denna dimension - + The geometry this dimension is linked to Den geometri som denna dimension är kopplad till - + The measurement of this dimension Mätningen av denna dimension - + For arc/circle measurements, false = radius, true = diameter - For arc/circle measurements, false = radius, true = diameter + För båg/cirkel mått, falskt = radie, sant = diameter - + Font size Teckenstorlek - + The number of decimals to show Antalet decimaler att visa - + Arrow size Pilstorlek - + The spacing between the text and the dimension line Avståndet mellan texten och dimensionslinjen - + Arrow type Piltyp - + Font name Typsnittsnamn - + Line width Linjebredd - + Line color Linjefärg - + Length of the extension lines Förlängningslinjernas längd - + Rotate the dimension arrows 180 degrees Rotera dimensionspilarna 180 grader - + Rotate the dimension text 180 degrees Rotera dimensionstexten 180 grader - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position Placeringen av texten. Lämna (0,0,0) för automatisk positionering - + Text override. Use $dim to insert the dimension length Text åsidosättning. Använd $dim för att infoga dimensionslängden - + A unit to express the measurement. Leave blank for system default En enhet för att uttrycka mätningen. Lämna tomt för systemets standard - + Start angle of the dimension Startvinkel för dimensionen - + End angle of the dimension Slutvinkel för dimensionen - + The center point of this dimension Mittpunkten för denna dimension - + The normal direction of this dimension Den normala riktningen för denna dimension - + Text override. Use 'dim' to insert the dimension length Text åsidosättning. Använd "dim" för att infoga dimensionslängden - + Length of the rectangle Rektangelns längd - + Radius to use to fillet the corners Radius som ska användas för att filetera hörnen - + Size of the chamfer to give to the corners Storleken på avfasningen för att ge till hörnen - + Create a face Skapa ett ansikte - + Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) - + Start angle of the arc - Start angle of the arc + Startvinkel av bågen - + End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle Cirkelns radie - + The minor radius of the ellipse Ellipsens mindre radie - + The major radius of the ellipse Ellipsens stora radie - + The vertices of the wire The vertices of the wire - + If the wire is closed or not Om tråden är stängd eller inte - + The start point of this line Startpunkten för denna linje - + The end point of this line Slutpunkten för denna linje - + The length of this line Längden på denna linje - + Create a face if this object is closed Skapa ett ansikte om det här objektet är stängt - + The number of subdivisions of each edge Antalet indelningar av varje kant - + Number of faces Antalet ansikten - + Radius of the control circle Kontrollcirkelns radie - + How the polygon must be drawn from the control circle Hur polygonen måste dras från kontrollcirkeln - + Projection direction Projektionsriktning - + The width of the lines inside this object Bredden på linjerna inuti det här objektet - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text Avståndet mellan textraderna - + The color of the projected objects Färgen på de projicerade objekten - + The linked object Det länkade objektet - + Shape Fill Style Forma fyllningsstilen - + Line Style Linjestil - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Skapa ett ansikte om denna spline är stängd - + Parameterization factor Parametriseringsfaktor - + The points of the Bezier curve Punkterna i Bezierkurvan - + The degree of the Bezier function Graden av Bezierfunktionen - + Continuity Kontinuitet - + If the Bezier curve should be closed or not Om Bezierkurvan ska stängas eller inte - + Create a face if this curve is closed Skapa ett ansikte om denna kurva är stängd - + The components of this block Komponenterna i detta block - + The base object this 2D view must represent Basobjektet denna 2D-vy måste representera - + The projection vector of this object Projektionsvektorn för detta objekt - + The way the viewed object must be projected Hur det visade objektet måste projiceras - + The indices of the faces to be projected in Individual Faces mode Indexen för de ansikten som ska projiceras i Enskilda ansiktsläge - + Show hidden lines Visa dolda linjer - + The base object that must be duplicated Basobjektet som måste dupliceras - + The type of array to create Den typ av matris som ska skapas - + The axis direction Axelriktningen - + Number of copies in X direction Antal kopior i X-riktning - + Number of copies in Y direction Antal kopior i Y-riktning - + Number of copies in Z direction Antal kopior i Z-riktning - + Number of copies Antal kopior - + Distance and orientation of intervals in X direction Avstånd och orientering av intervaller i X-riktning - + Distance and orientation of intervals in Y direction Avstånd och orientering av intervaller i Y-riktning - + Distance and orientation of intervals in Z direction Avstånd och orientering av intervaller i Z-riktning - + Distance and orientation of intervals in Axis direction Avstånd och orientering av intervaller i Axelriktningen - + Center point Mittpunkt - + Angle to cover with copies Vinkel för att täcka med kopior - + Specifies if copies must be fused (slower) Anger om kopior måste smälta (långsammare) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Valda delobjekt (kanter) för PathObj - + Optional translation vector Valfri översättningsvektor - + Orientation of Base along path Orientation of Base along path - + X Location X-plats - + Y Location Y-plats - + Z Location Z-plats - + Text string Textsträng - + Font file name Filnamn för typsnitt - + Height of text Texthöjd - + Inter-character spacing Mellantecken avstånd - + Linked faces Länkade ansikten - + Specifies if splitter lines must be removed Anger om splitterlinjer måste tas bort - + An optional extrusion value to be applied to all faces Ett valfritt extruderingsvärde som ska tillämpas på alla ytor - + Height of the rectangle Rektangelns höjd - + Horizontal subdivisions of this rectangle Horisontella indelningar av denna rektangel - + Vertical subdivisions of this rectangle Vertikala indelningar av denna rektangel - + The placement of this object Placeringen av detta objektet - + The display length of this section plane The display length of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location För Cutlines- och Cutfaces-lägen, lämnar detta ansikten på den skurna platsen - + The base object is the wire, it's formed from 2 objects Basobjektet är tråden, den är bildad av 2 objekt - + The tool object is the wire, it's formed from 2 objects Verktygsobjektet är tråden, den är bildad av 2 objekt - + The length of the straight segment Längden på det raka segmentet - + The point indicated by this label Den punkt som anges i denna etikett - + The points defining the label polyline De punkter som definierar etiketten polyline - + The direction of the straight segment Riktning av det raka segmentet - + The type of information shown by this label Den typ av information som visas av denna etikett - + The target object of this label Målobjektet för denna etikett - + The text to display when type is set to custom Texten som ska visas när typen är inställd på anpassad - + The text displayed by this label Texten som visas av denna etikett - + The size of the text Textstorleken - + The font of the text Typsnittets storlek - + The size of the arrow Pilens storlek - + The vertical alignment of the text Den vertikala anpassningen av texten - + The type of arrow of this label Typ av pil på denna etikett - + The type of frame around the text of this object Typ av ram runt texten i det här objektet - + Text color Textfärg - + The maximum number of characters on each line of the text box Det maximala antalet tecken på varje rad i textrutan - + The distance the dimension line is extended past the extension lines Avståndet dimensionslinjen förlängs förbi förlängningslinjerna - + Length of the extension line above the dimension line Förlängningslinjens längd ovanför dimensionslinjen - + The points of the B-spline Punkterna i B-spline - + If the B-spline is closed or not Om B-spline är stängd eller inte - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipser och B-splines till linjesegment - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible Om detta är sant kommer det här objektet endast att omräknas om det är synligt - + Base Bas - + PointList PointList - + Count Antal - + The objects included in this clone Objekten som ingår i denna klon - + The scale factor of this clone Skalfaktorn för denna klon - + If this clones several objects, this specifies if the result is a fusion or a compound Om detta klonar flera objekt, anger detta om resultatet är en fusion eller en förening - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Visa en ledarlinje eller inte - + The text displayed by this object Texten som visas av det här objektet - + Line spacing (relative to font size) Radavstånd (relativ till teckenstorlek) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Backe - + Scale Skala - + Writing camera position Skriver kamerans position - + Writing objects shown/hidden state Skriva objekt visas/dolda tillstånd - + X factor X-faktor - + Y factor Y-faktor - + Z factor Z-faktor - + Uniform scaling Enhetlig skalning - + Working plane orientation Arbetsplan orientering @@ -781,20 +816,25 @@ Installera dxf-bibliotek insticksmodul manuellt från menyverktyg -> Insticksmodulshanterare - + This Wire is already flat Den här tråden är redan platt - + Pick from/to points Välj från/till punkter - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Lutning för att ge valda ledningar/linjer: 0 = horisontell, 1 = 45 grader upp, -1 = 45 grader ner + + + Create a clone + Skapa en klon + DraftShapeStringGui @@ -856,18 +896,18 @@ menyverktyg -> Insticksmodulshanterare Reset Point - Reset Point + Återställ punkt Draft_AddConstruction - + Add to Construction group Lägg till i Konstruktionsgrupp - + Adds the selected objects to the Construction group Lägger till de markerade objekten i Konstruktionsgruppen @@ -875,12 +915,12 @@ menyverktyg -> Insticksmodulshanterare Draft_AddPoint - + Add Point Lägg till punkt - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ menyverktyg -> Insticksmodulshanterare Draft_AddToGroup - + Move to group... Flytta till grupp... - + Moves the selected object(s) to an existing group Flyttar de valda objekt(en) till en befintlig grupp @@ -901,12 +941,12 @@ menyverktyg -> Insticksmodulshanterare Draft_ApplyStyle - + Apply Current Style Tillämpa aktuell stil - + Applies current line width and color to selected objects Applicerar nuvarande linjebredd och -färg till valda objekt @@ -914,12 +954,12 @@ menyverktyg -> Insticksmodulshanterare Draft_Arc - + Arc Cirkelbåge - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ menyverktyg -> Insticksmodulshanterare Draft_ArcTools - + Arc tools Arc tools @@ -935,25 +975,25 @@ menyverktyg -> Insticksmodulshanterare Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points - Creates an arc by 3 points + Skapar en båge genom 3 punkter Draft_Array - + Array Matris - + Creates a polar or rectangular array from a selected object Skapar en polar eller rektangulär matris från ett markerat objekt @@ -961,12 +1001,12 @@ menyverktyg -> Insticksmodulshanterare Draft_AutoGroup - + AutoGroup Gruppera automatiskt - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ menyverktyg -> Insticksmodulshanterare Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ menyverktyg -> Insticksmodulshanterare Draft_BezCurve - + BezCurve BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Skapar en Bezier-kurva. CTRL för att fästa, SHIFT för att villkora @@ -1000,7 +1040,7 @@ menyverktyg -> Insticksmodulshanterare Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ menyverktyg -> Insticksmodulshanterare Draft_Circle - + Circle Cirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Skapar en cirkel. CTRL för att snäppa, ALT för att välja tangentobjekt @@ -1021,12 +1061,12 @@ menyverktyg -> Insticksmodulshanterare Draft_Clone - + Clone Klona - + Clones the selected object(s) Klonar ett eller flera valda objekt @@ -1034,12 +1074,12 @@ menyverktyg -> Insticksmodulshanterare Draft_CloseLine - + Close Line Stäng linje - + Closes the line being drawn Stänger den linje som ritas @@ -1047,12 +1087,12 @@ menyverktyg -> Insticksmodulshanterare Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Ta bort punkt - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Skapar en dimension. CTRL för att snäppa, SKIFT för att begränsa, ALT för att välja ett segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Nedgradera - + Explodes the selected objects into simpler objects, or subtracts faces Explodes the selected objects into simpler objects, or subtracts faces @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Utkast till skiss - + Convert bidirectionally between Draft and Sketch objects Konvertera bidirektionellt mellan ritning och skiss objekt @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Ritning - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Redigera - + Edits the active object Redigerar det aktiva objektet @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Ellips - + Creates an ellipse. CTRL to snap Skapar en ellips. CTRL för att fästa @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Avsluta linje - + Finishes a line without closing it Avslutar en linje utan att stänga den @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Växla riktning på dimension - + Flip the normal direction of a dimension Vänd den normala riktningen av en dimension @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Bota - + Heal faulty Draft objects saved from an earlier FreeCAD version Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Förena - + Joins two wires together Förenar två ledningar tillsammans @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Skapar en etikett, eventuellt kopplad till ett markerat objekt eller element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Linje - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Skapar en 2-punkts linje. CTRL för att snäppa, SKIFT för att begränsa @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Spegel - + Mirrors the selected objects along a line defined by two points Speglar de markerade objekten längs en linje som definieras av två punkter @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Flytta - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Skapar en offset till det aktiva objektet. CTRL för att snäppa, SKIFT för att begränsa, ALT för att kopiera @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Skapar kopior av ett markerat objekt utmed vald bana. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punkt - + Creates a point object Skapar punktobjekt @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Skapar kopior av ett markerat objekt på positionen för punkter. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Skapar en regelbunden månghörning. CTRL för att snäppa, SKIFT för att begränsa @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rektangel - + Creates a 2-point rectangle. CTRL to snap Skapar en 2-punkts rektangel. CTRL för att snäppa @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Rotera - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roterar de valda objekten. CTRL för att snäppa, SKIFT för att begränsa, ALT skapar en kopia @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Skala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skalar de valda objekten från en baspunkt.CTRL för att snäppa, SKIFT för att begränsa, ALT för att kopiera @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Välj grupp - + Selects all objects with the same parents as this group Markerar alla objekt med samma föräldrar som denna grupp @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Välj plan - + Select a working plane for geometry creation Väljer ett arbetsplan för skapande av geometri @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Skapar ett proxyobjekt från det aktuella arbetsplanet - + Create Working Plane Proxy Skapa Arbetsplansproxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D form vy - + Creates Shape 2D views of selected objects Skapar form 2D vyer för markerade objekt @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Form från text... - + Creates text string in shapes. Skapar textsträng i former. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Visa snäppfält - + Shows Draft snap toolbar Visar snäpp-verktygsfält för ritning @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Ställ in lutning - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Vinklar - + Snaps to 45 and 90 degrees points on arcs and circles Fäst mot 45- och 90-graderspunkter på bågar och cirklar @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Mitten - + Snaps to center of circles and arcs Fäst mot mitten av cirklar och bågar @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensioner - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Ändpunkt - + Snaps to endpoints of edges Fäst mot kanters ändpunkter @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Förlängning - + Snaps to extension of edges Fäst mot kanters förlängning @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Rutnät - + Snaps to grid points Fäst mot rutnät @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Skärning - + Snaps to edges intersections Fäst mot kanters skärningspunkter @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Växla på/av - + Activates/deactivates all snap tools at once Aktiverar/inaktiverar alla fästverktyg samtidigt - + Lock Lås @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Mittpunkt - + Snaps to midpoints of edges Fäst mot kanters mittpunkt @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Närmaste - + Snaps to nearest point on edges Fäst mot närmaste punkt på kanter @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Vinkelrät - + Snaps to orthogonal and 45 degrees directions Fäst mot vinkelräta och 45 graders riktningar @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Parallell - + Snaps to parallel directions of edges Fäst mot kanters parallellriktningar @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Vinkelrätt - + Snaps to perpendicular points on edges Fäst mot kanters vinkelräta punkter @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Arbetsyta - + Restricts the snapped point to the current working plane Begränsar fästpunkter till den aktuella arbetsytan @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Sträck - + Stretches the selected objects Sträcker de valda objekten @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Skapar en annotering. CTRL för att snäppa @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Växlar till konstruktionsläge för efterkommande objekt. - + Toggle Construction Mode Växla konstruktionsläge @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Växla kontinuerligt läge - + Toggles the Continue Mode for next commands. Växlar Fortsättläge för nästa kommandon. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Växla visningsläge - + Swaps display mode of selected objects between wireframe and flatlines Växlar visningsläget för de valda objekten mellan trådar och platta linjer @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Tänd/släck rutnät - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid Rutnät - + Toggles the Draft grid On/Off Växlar ritningsrutnätet på/av @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trimmar eller förlänger det markerade objektet eller extruderar enstaka ytor. CTRL snäpper, SKIFT begränsar till nuvarande segment eller till normal, ALT inverterar @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Ångra sista segmentet - + Undoes the last drawn segment of the line being drawn Ångrar det senast ritade segmentet på den linje som ritas @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Uppgradera - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Lägger till en VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Skapar en flerpunkts DraftWire (DWire). CTRL för att snäppa, SKIFT för att begränsa + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Allmänna skissinställningar - + This is the default color for objects being drawn while in construction mode. Detta är standardfärgen för objekt som ritats i konstruktionsläget. - + This is the default group name for construction geometry Detta är standardgruppnamnet för konstruktionsgeometri - + Construction Konstruktion @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainSpara nuvarande färg och linjebredd över sessioner - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Om denna är ikryssad så kommer kopieringsläget att behållas över kommandot, annars kommer kommandon att alltid starta i inte-kopieringsläge - + Global copy mode Globalt kopieringsläge - + Default working plane Standard arbetsplan - + None Inget - + XY (Top) XY (Topp) - + XZ (Front) XZ (Fram) - + YZ (Side) YZ (sida) @@ -1988,12 +2023,12 @@ som "Arial:Bold" Allmänna inställningar - + Construction group name Konstruktion gruppnamn - + Tolerance Tolerans @@ -2018,22 +2053,22 @@ som "Arial:Bold" Här kan du ange en katalog som innehåller SVG-filer som innehåller <pattern> definitioner som kan läggas till standard tvärsnittsmönstren - + Draft interface mode Gränssnittsläge för skiss - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Detta är det gränssnittsläge i vilket skissmodulen kommer att arbeta: Verktygsfält läget kommer att placera alla skiss inställningar i ett separat verktygsfält, medan Aktivitetsfälts läget kommer att använda FreeCAD's uppgiftsvysystem för alla sina användarinteraktioner - + Toolbar Verktygsfält - + Taskview Uppgiftsvy @@ -2063,12 +2098,12 @@ som "Arial:Bold" Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Efter kopiering av objekt, så blir objekten normalt markerade. Om detta alternativ är markerat, så kommer grundobjekten att markeras istället. - + Select base objects after copying Välj grundobjekt efter kopiering @@ -2103,7 +2138,7 @@ som "Arial:Bold" Huvudlinjer kommer att ritas tjockare. Ange här hur många rutor mellan huvudlinjer. - + Internal precision level Intern precisionsnivå @@ -2218,12 +2253,12 @@ som "Arial:Bold" Översätt vit linjefärg till svart - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2243,12 +2278,7 @@ som "Arial:Bold" Fäst alltid (inaktivera fästläge) - - Construction geometry - Konstruktionsgeometri - - - + Construction geometry color Konstruktionsgeometrifärg @@ -2388,7 +2418,7 @@ som "Arial:Bold" Välj en teckensnittsfil - + Fill objects with faces whenever possible Fill objects with faces whenever possible @@ -2678,7 +2708,7 @@ som "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2717,7 +2747,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2797,17 +2827,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2887,12 +2907,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2903,694 +2923,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Konstruktionsgeometri + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Släkting + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + Stäng + + + + O + O + + + + Copy + Kopiera + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Längd + + + + H + H + + + + Wipe + Rensa + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Draft Snap - - - Draft creation tools - Verktyg för att skapa skisser - - - - Draft modification tools - Modifieringsverktyg till skisser - - - - Utilities - Verktyg - - - - Wire tools - Trådverktyg - - - - Snapping - Fästning - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Draft Command Bar - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects Applicera på valda objekt - + Autogroup off Autogroup off - + active command: Aktivt kommando: - + None Inget - + Active Draft command Aktivt ritkommando - + X coordinate of next point Nästa punkts X koordinat - + X X - + Y Y - + Z Z - + Y coordinate of next point Nästa punkts Y koordinat - + Z coordinate of next point Nästa punkts Z koordinat - + Enter point Enter point - + Enter a new point with the given coordinates Enter a new point with the given coordinates - + Length Längd - + Angle Vinkel - + Length of current segment Längd på aktuellt segment - + Angle of current segment Vinkel på aktuellt segment - + Radius Radie - + Radius of Circle Cirkelradie - + If checked, command will not finish until you press the command button again Om markerat, så avslutas inte kommandot förrän du trycker på kommandoknappen igen - + If checked, an OCC-style offset will be performed instead of the classic offset Om detta är markerat så kommer en offset i OCC-stil utföras istället för klassisk offset - + &OCC-style offset &OCC-stil offset - + Add points to the current object Lägg till punkter till det aktuella objektet - + Remove points from the current object Ta bort punkter från det aktuella objektet - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Sidor - + Number of sides Antal sidor - + Offset Offset - + XY (top) XY (ovanifrån) - - Select XY plane - Välj XY plan - - - + XZ (front) XZ (framifrån) - - Select XZ plane - Välj XZ plan - - - + YZ (side) YZ (från sidan) - - Select YZ plane - Välj YZ plan - - - + View Vy - - Select plane perpendicular to the current view - Välj plan vinkelrätt till nuvarande vy - - - + Auto Automatisk - - Do not project points to a drawing plane - Projicera inte punkter till ett ritplan - - - + Text string to draw Text att rita - + String Sträng - + Height of text Texthöjd - + Height Höjd - + Intercharacter spacing Intercharacter spacing - + Tracking Spårning - + Full path to font file: Fullständig sökväg till teckensnittsfil: - + Open a FileChooser for font file Öppna fildialog för teckensnittsfil - + Grid spacing Rutnätsavstånd - + The spacing between the grid lines The spacing between the grid lines - + Main line every Huvudlinje varje - + The number of lines between main lines Antal linjer mellan huvudlinjer - + Center plane on view Center plane on view - - Select Plane - Välj plan - - - + Line Linje - + DWire DWire - + Circle Cirkel - + Center X X center - + Arc Cirkelbåge - + Point Punkt - + Label Label - + Distance Distans - + Trim Trimma - + Pick Object Välj objekt - + Edit Redigera - + Global X Globalt X - + Global Y Globalt Y - + Global Z Globalt Z - + Local X Lokalt X - + Local Y Lokalt Y - + Local Z Lokalt Z - + Invalid Size value. Using 200.0. Ogiltigt värde. Använder 200,0 istället. - + Invalid Tracking value. Using 0. Ogiltigt värde för spårning. Använder 0 som värde. - + Please enter a text string. Ange en textsträng. - + Select a Font file Välj en teckensnittsfil - + Please enter a font file. Ange en teckensnittsfil. - + Autogroup: Gruppera automatiskt: - + Faces Ytor - + Remove Ta bort - + Add Lägg till - + Facebinder elements Facebinder elements - + Create Line Skapa linje - - Pick next point: - - Välj nästa punkt: - - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve BezCurve - + Create BezCurve Skapa BezCurve - + Rectangle Rektangel - + Create Plane Skapa plan - + Create Rectangle Skapa rektangel - + Create Circle Skapa Cirkel - + Create Arc Skapa Cirkelbåge - + Start Angle Startvinkel - + Aperture Öppning - + Polygon Polygon - + Create Polygon Skapa Polygon - + Ellipse Ellips - + Create Ellipse Skapa ellips - + Text Text - + Create Text Skapa Text - + Dimension Dimension - + Create Dimension Skapa Dimension - + ShapeString ShapeString - + Create ShapeString Skapa ShapeString - + Copy Kopiera - + Move Flytta - + Change Style Ändra Stil - + Rotate Rotera - - Cannot offset this object type - - Kan inte skapa offset för denna objekttyp - - - + Stretch Sträck - + Upgrade Uppgradera - + Downgrade Nedgradera - + Selection is not a Knot Markerat föremål är inte en knut - + Convert to Sketch Convert to Sketch - + Convert to Draft Konvertera till Utdrag - + Convert Konvertera - + Array Matris - + Create Point Skapa punkt - + Mirror Spegel - + &Draft &Skiss @@ -3614,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Kunde inte uppgradera de här objekten. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Släkting - + Continue Continue - + Close Stäng @@ -3831,7 +3998,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Välj kant @@ -3846,7 +4013,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Längdläge - + Wipe Rensa @@ -3861,454 +4028,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Gör klart - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - alternativ - - - + Default Standard - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Stänger - - - + Create Wire Create Wire - - Removing last point - Tar bort senaste poängen - - - - Next point: - Next point: - - - - Restarting from - Startar om från - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Skapa B-spline - + Bezier curve has been closed Bezierkurvan har stängts - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Välj ett objekt att flytta - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Välj ett objekt att rotera - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Förena - + Select an object to split Select an object to split - + Select an object to upgrade Välj ett objekt att uppgradera - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4318,56 +4310,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Skala - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Topp + + + + Front + Front + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Djupgående + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Verktyg + + + + Wire tools + Trådverktyg + + + + Snapping + Fästning + diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index 45465ac045..57fa3c40d1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index e59e4e1895..14963eff1a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Tarama deseni tanımlar - + Sets the size of the pattern Modelin ölçülerini ayarlar - + Startpoint of dimension Ölçümün başlangıç noktası - + Endpoint of dimension Ölçümün bitiş noktası - + Point through which the dimension line passes Ölçü çizgisinin geçtiği nokta - + The object measured by this dimension Bu ölçüm ile ölçülen nesne - + The geometry this dimension is linked to Bu boyutun bağlı olduğu geometri - + The measurement of this dimension Bu ölçümün ölçüsü - + For arc/circle measurements, false = radius, true = diameter Yay/çember ölçümleri, yanlış = radyüs, doğru = çap - + Font size Yazı Boyutu - + The number of decimals to show Gösterilecek ondalık sayı - + Arrow size Ok boyu - + The spacing between the text and the dimension line Metin ve ölçü çizgisi arasındaki boşluk - + Arrow type Ok tipi - + Font name Yazı tipi ismi - + Line width Çizgi Kalınlığı - + Line color Çizgi rengi - + Length of the extension lines Uzatma çizgilerinin uzunluğu - + Rotate the dimension arrows 180 degrees Ölçüm oklarını 180 derece döndürür - + Rotate the dimension text 180 degrees Ölçüm yazısını 180 derece döndürür - + Show the unit suffix Birim son eki - + The position of the text. Leave (0,0,0) for automatic position Etiket metin konumu. (0,0,0) için otomatik Merkezi konumunu korumak - + Text override. Use $dim to insert the dimension length Metni geçersiz kılmak. Ölçüm uzunluğunu eklemek için $dim kullanın - + A unit to express the measurement. Leave blank for system default Ölçümü ifade eden bir birim. Sistem varsayılanı için boş bırakın - + Start angle of the dimension Ölçümün başlangıç açısı - + End angle of the dimension Ölçümün başlangıç açısı - + The center point of this dimension Bu ölçümün ölçüsü - + The normal direction of this dimension Bu ölçümün normal yönü - + Text override. Use 'dim' to insert the dimension length Metin geçersiz kılma. Boyut uzunluğunu eklemek için 'dim' kullanın - + Length of the rectangle Dikdörtgenin uzunluğu - + Radius to use to fillet the corners Köşeleri yuvarlamak için kullanılacak yarıçap - + Size of the chamfer to give to the corners Köşelere verilecek pahın ölçüsü - + Create a face Yüzey oluştur - + Defines a texture image (overrides hatch patterns) Doku imajı tanımla (tarama desenlerini geçersiz kılar) - + Start angle of the arc Yayın başlangıç açısı - + End angle of the arc (for a full circle, give it same value as First Angle) Yayın bitiş açısı (tam çember için, aynı değeri başlangıç açısı olarak verin) - + Radius of the circle Çemberin yarıçapı - + The minor radius of the ellipse Elipsin küçük yarıçapı - + The major radius of the ellipse Elipsin büyük yarıçapı - + The vertices of the wire Kesişme noktaları tel - + If the wire is closed or not Tel ya da değil kapalıysa - + The start point of this line Çizginin başlangıç noktası - + The end point of this line Çizginin bitiş noktası - + The length of this line Bu çizginin uzunluğu - + Create a face if this object is closed Bu obje kapalı ise yüzey oluştur - + The number of subdivisions of each edge Her kenarın alt bölündüklerinin sayısı - + Number of faces Yüzeylerin sayısı - + Radius of the control circle Kontrol çemberinin yarıçapı - + How the polygon must be drawn from the control circle Nasıl çokgen kontrol daire çizilmiş olması gerekir - + Projection direction Projeksiyon yön - + The width of the lines inside this object Bu nesnenin içindeki çizgilerin genişliği - + The size of the texts inside this object Bu nesnenin içindeki metinlerin boyutu - + The spacing between lines of text Metin satırları arasındaki boşluk - + The color of the projected objects Yansıtılan nesnelerin rengi - + The linked object Bağlantı - + Shape Fill Style Şekil Dolgu Stili - + Line Style Çizgi Stili - + If checked, source objects are displayed regardless of being visible in the 3D model İşaretlenirse, görünür olmasına bakılmaksızın kaynak nesneler 3D modelde görüntülenir - + Create a face if this spline is closed Bu spline kapalıysa yüzey oluştur - + Parameterization factor Parametreleştirme faktörü - + The points of the Bezier curve Bezier eğrisinin noktaları - + The degree of the Bezier function Bezier işlevinin derecesini - + Continuity Süreklilik - + If the Bezier curve should be closed or not Bezier eğrisi ya da kapatılması gerekir Eğer - + Create a face if this curve is closed Bu eğri kapalıysa yüzey oluştur - + The components of this block Bu bloğun bileşenleri - + The base object this 2D view must represent Temel nesne bu 2B görünümü temsil etmelidir - + The projection vector of this object Bu nesnenin projeksiyon vektör - + The way the viewed object must be projected Görüntülenen nesne öngörülen şekilde - + The indices of the faces to be projected in Individual Faces mode Bireysel yüz modunda projelendirilen yüzler endeksleri - + Show hidden lines Gizli dosyaları göster - + The base object that must be duplicated Çoğaltılması gereken temel nesne - + The type of array to create Oluşturmak dizi türü - + The axis direction Eksen yönü - + Number of copies in X direction X yönünde kopya sayısı - + Number of copies in Y direction Y yönünde kopya sayısı - + Number of copies in Z direction Z yönünde kopya sayısı - + Number of copies Kopyaların sayısı - + Distance and orientation of intervals in X direction Mesafe ve yön X aralıklarla yönünü - + Distance and orientation of intervals in Y direction Mesafe ve yön X aralıklarla yönünü - + Distance and orientation of intervals in Z direction Mesafe ve yön X aralıklarla yönünü - + Distance and orientation of intervals in Axis direction Mesafe ve yön X aralıklarla yönünü - + Center point Orta noktası - + Angle to cover with copies Kopya ile karşılamak için açı - + Specifies if copies must be fused (slower) Kopya (daha yavaş) erimiş gerekir Eğer belirtir - + The path object along which to distribute objects Nesneleri dağıtmanın yol nesnesi - + Selected subobjects (edges) of PathObj PathObj seçilen alt nesneleri (kenarları) - + Optional translation vector İsteğe bağlı çeviri vektörü - + Orientation of Base along path Bazın yol boyunca yönlendirilmesi - + X Location X Konumu - + Y Location Y Konumu - + Z Location Z Konumu - + Text string Metin dizesi - + Font file name Yazı tipi dosyası adı - + Height of text Satır yüksekliği - + Inter-character spacing Arası karakter aralığı - + Linked faces Bağlantılı yüzler - + Specifies if splitter lines must be removed Bölme çizgilerinin kaldırılması gerekip gerekmeyeceğini belirtir - + An optional extrusion value to be applied to all faces Tüm yüzlere uygulanacak isteğe bağlı bir ekstrüzyon değeri - + Height of the rectangle Dikdörtgenin yüksekliği - + Horizontal subdivisions of this rectangle Bu dikdörtgenin yatay alt bölümleri - + Vertical subdivisions of this rectangle Bu dikdörtgenin yatay alt bölümleri - + The placement of this object Bu nesnenin yerleşimi - + The display length of this section plane Kesit düzlemin ekran boyutu - + The size of the arrows of this section plane Bu kesit düzleminin oklarının boyutu - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Cutlines ve Cutfaces modları için, bu, yüzleri kesme konumunda bırakır - + The base object is the wire, it's formed from 2 objects Temel nesne tel, 2 nesnelerden oluşan - + The tool object is the wire, it's formed from 2 objects Alet nesnesi tel olup 2 nesneden oluşmaktadır - + The length of the straight segment Düz bir parça uzunluğu - + The point indicated by this label Bu etiket tarafından belirtilen noktası - + The points defining the label polyline Etiket bağlantılı çizgi tanımlama Puan - + The direction of the straight segment Düz bir parça uzunluğu - + The type of information shown by this label Bu etiket tarafından gösterilen bilgi türü - + The target object of this label Bu etiket hedef nesne - + The text to display when type is set to custom Yazım özel olarak ayarlandığında görüntülenecek metin - + The text displayed by this label Bu etiket tarafından görüntülenen metin - + The size of the text Etiket yazısının boyutu - + The font of the text Etiket yazısının fontu - + The size of the arrow Ok İşaretinin boyutu - + The vertical alignment of the text Metnin dikey hizalaması - + The type of arrow of this label Bu etiketin ok işareti türü - + The type of frame around the text of this object Bu nesnenin metin etrafında çerçeve türü - + Text color Metin rengi - + The maximum number of characters on each line of the text box Her satırında metin kutusunun karakter sayısı - + The distance the dimension line is extended past the extension lines Ölçülendirme çizgisinin uzantı hatlarını geçtiği mesafe - + Length of the extension line above the dimension line Ölçülendirme çizgisi üzerindeki uzantı hattı mesafesi - + The points of the B-spline B-spline'ın noktaları - + If the B-spline is closed or not B-spline kapalı veya değilse - + Tessellate Ellipses and B-splines into line segments Desenli Elipsler ve B-spline'ları çizgi parçalarına ayırır - + Length of line segments if tessellating Ellipses or B-splines into line segments Çizgi parçalarını çıkartmak için Elips veya B-spline'ları çizgi parçalarına ayır - + If this is True, this object will be recomputed only if it is visible Eğer bu doğruysa, yalnızca görünür olduğunda bu nesne yeniden hesaplanacaktır - + Base Baz - + PointList NoktaListesi - + Count Saymak - + The objects included in this clone Bu klon da bulunan nesneler - + The scale factor of this clone Bu klonun ölçek faktörü - + If this clones several objects, this specifies if the result is a fusion or a compound Eğer bu çeşitli nesneleri klonlarsa, sonuç bir füzyon veya bir bileşik olup olmadığını belirtir - + This specifies if the shapes sew Bu şeklin kapalı yüzeyden katıya geçiş olup olmadığını belirtir - + Display a leader line or not Rehber hattını göster ya da gösterme - + The text displayed by this object Bu nesne tarafından görüntülenen metin - + Line spacing (relative to font size) Satır aralığı (yazı tipi boyutuna nispetle) - + The area of this object - The area of this object + Bu nesnenin alanı - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Telin sonunda Ebat sembolü gösterir - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Sigorta duvarı ve aynı tip ve malzemeden yapı nesneleri + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Eğim - + Scale Ölçek - + Writing camera position Yazma kamera konumu - + Writing objects shown/hidden state Nesneleri gösterilen/hidden devlet yazma - + X factor X faktörü - + Y factor Y faktörü - + Z factor Z faktörü - + Uniform scaling Tek tip ölçekleme - + Working plane orientation Çalışma düzlemi yönlendirme @@ -781,20 +816,25 @@ Lütfen dxf Kütüphane addon'unu manuel olarak kurun menüden Araçlar -> Eklenti Yöneticisi - + This Wire is already flat Bu Tel daima düz yüzeydir - + Pick from/to points Noktalar ı/dan seçin - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Seçilen Tel / Hatları vermek için eğim: 0 = yatay, 1 = 45 derece yukarı, -1 = 45 derece aşağıda + + + Create a clone + Klon oluştur + DraftShapeStringGui @@ -846,28 +886,28 @@ menüden Araçlar -> Eklenti Yöneticisi Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Koordinatları girin veya noktayı fareyle seçin. Reset 3d point selection - Reset 3d point selection + 3B nokta seçimini sıfırla Reset Point - Reset Point + Noktayı sıfırla Draft_AddConstruction - + Add to Construction group İnşa grubuna ekle - + Adds the selected objects to the Construction group Seçilen nesneleri Yapı grubuna ekler @@ -875,12 +915,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_AddPoint - + Add Point Nokta Ekle - + Adds a point to an existing Wire or B-spline Mevcut bir Tel veya B-spline'a bir nokta ekler @@ -888,12 +928,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_AddToGroup - + Move to group... Gurubu Taşı... - + Moves the selected object(s) to an existing group Seçili nesneleri mevcut gruplara taşır @@ -901,12 +941,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_ApplyStyle - + Apply Current Style Varsayılan çizim şeklini uygula - + Applies current line width and color to selected objects Seçili nesnelere geçerli çizgi genişliğini ve rengini uygular @@ -914,46 +954,46 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_Arc - + Arc Yay - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Merkez nokta ve yarıçapa göre bir yay oluşturur. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT Draft_ArcTools - + Arc tools - Arc tools + Yay Araçları Draft_Arc_3Points - + Arc 3 points - Arc 3 points + 3 Noktalı Yay - + Creates an arc by 3 points - Creates an arc by 3 points + 3 noktayla bir yay oluşturur Draft_Array - + Array Dizi - + Creates a polar or rectangular array from a selected object Seçilen bir nesneden polar veya dikdörtgen bir dizi oluşturur @@ -961,12 +1001,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_AutoGroup - + AutoGroup Oto Grubu - + Select a group to automatically add all Draft & Arch objects to Tüm Taslak / Mimari nesnelerini otomatik olarak eklemek için bir grup seçin @@ -974,12 +1014,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Bir çok-noktalı B-spline oluşturur. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT @@ -987,12 +1027,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_BezCurve - + BezCurve Çan eğrisi - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Bir Bezier eğrisi oluşturur. Nokta yakalamak için CTRL, sınırlamak için ÜSTKRKT @@ -1000,20 +1040,20 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_BezierTools - + Bezier tools - Bezier tools + Bezier araçları Draft_Circle - + Circle Çember - + Creates a circle. CTRL to snap, ALT to select tangent objects Bir çember oluşturur. Nokta Yakalamak için CTRL, teğet nesneleri seçmek için ALT tuşlarına basın @@ -1021,12 +1061,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_Clone - + Clone Klon - + Clones the selected object(s) Seçili nesneleri / dosyaları kopyalar @@ -1034,12 +1074,12 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_CloseLine - + Close Line Çizgiyi Kapat - + Closes the line being drawn Çizilen çizgiyi kapatır @@ -1047,27 +1087,27 @@ menüden Araçlar -> Eklenti Yöneticisi Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + KübikBezierEğrisi - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Bir Kübik Bezier eğrisi oluşturur +Kontrol noktalarını tanımlamak için tıklayın ve sürükleyin. Eklemek için CTRL, kısıtlamak için SHIFT Draft_DelPoint - + Remove Point Nokta Kaldır - + Removes a point from an existing Wire or B-spline Mevcut bir Kablo veya B-spline'dan bir noktayı kaldırır @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Boyut - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Bir ölçülendirme oluşturur. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT, bir segment seçmek için ALT @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Önceki sürüme dön - + Explodes the selected objects into simpler objects, or subtracts faces Seçilen nesneleri daha basit nesneler halinde patlar veya yüzleri çıkarır @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Taslaktan Eskize - + Convert bidirectionally between Draft and Sketch objects Taslak ve Eskiz nesneleri arasında çift yönlü dönüştürün @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Çizim - + Puts the selected objects on a Drawing sheet Seçilen nesneleri Çizim sayfasına yerleştirir @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Düzenle - + Edits the active object Etkin nesneyi düzenler @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Geliştirilmiş Düzenleme - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Seçilen nesneleri düzenler Draft_Ellipse - + Ellipse Elips - + Creates an ellipse. CTRL to snap Bir elips oluşturur. Nokta Yakalamak için CTRL @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Seçili face(s) bir facebinder nesnesi oluşturur @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Çizgiyi bitir - + Finishes a line without closing it Bir satırı kapatmadan tamamlar @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Boyut çevir - + Flip the normal direction of a dimension Bu ölçümün normal yönü @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal İyileştir - + Heal faulty Draft objects saved from an earlier FreeCAD version Eski bir FreeCAD sürümünden kaydedilen hatalı Taslak nesneleri iyileştirin @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Birleştir - + Joins two wires together İki kabloyu birleştirir @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Etiket - + Creates a label, optionally attached to a selected object or element İsteğe bağlı olarak bir seçili nesne veya öğesine iliştirilmiş bir etiket oluşturur + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Çizgi - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 2 noktalı bir çizgi oluşturur. Nokta Yakalamak için CTRL, kısıtlamak için ÜSTKRKT @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Ayna - + Mirrors the selected objects along a line defined by two points Seçili nesneleri iki nokta ile tanımlanan bir çizgide aynalar @@ -1275,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Taşı - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Seçilen nesneleri 2 nokta arasında hareket ettirir. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT Draft_Offset - + Offset Uzaklaşma - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Aktif nesneyi Öteler. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT, kopyalamak için ALT @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Bölüm dizisi - + Creates copies of a selected object along a selected path. Seçilen bir yol boyunca seçili bir nesnenin kopyalarını oluşturur. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Nokta - + Creates a point object Bir nokta nesnesi oluşturur @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray NoktaÇoğalt - + Creates copies of a selected object on the position of points. Seçilen nesnenin kopyalarını noktalar konumuna oluşturur. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Çokgen - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Sıradan bir çokgen oluşturur. Nokta Yakalamak için CTRL, Kısıtlamak için SHIFT @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Dikdörtgen - + Creates a 2-point rectangle. CTRL to snap 2-noktalı bir dikdörtgen oluşturur. Nokta Yakalamak için CTRL @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Döndür - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Seçili nesneleri döndürür. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT, kopyalamak için ALT @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Ölçek - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Temel bir noktaya göre seçilen nesneleri ölçekler. Nokta Yakalamak için CTRL, kısıtlamak için SHIFT, kopyalamak için ALT @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Grubu seç - + Selects all objects with the same parents as this group Aynı ebeveynelere sahip nesneleri bu grup olarak seçer @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane DüzlemSeçin - + Select a working plane for geometry creation Geometri oluşturulması için bir çalışma düzlemi seçin @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Geçerli çalışma düzleminden bir proxy nesnesi oluşturur - + Create Working Plane Proxy Çalışma Planı Proxy'si Oluşturma @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Şekil 2B görünümü - + Creates Shape 2D views of selected objects Seçilen nesnelerin Şekil 2B görünümlerini oluşturur @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Metinden şekil... - + Creates text string in shapes. Şekillerde metin dizesi oluşturur. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Yakalama Çubuğunu Göster - + Shows Draft snap toolbar Taslak yakalama araç çubuğunu gösterir @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Eğimi Ayarlayın - + Sets the slope of a selected Line or Wire Seçilen bir Çizgi veya Telin eğimini ayarlar @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Açı - + Snaps to 45 and 90 degrees points on arcs and circles Yaylar ve daireler 45 ve 90 derecede noktaları yakalar @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Ortala - + Snaps to center of circles and arcs Daireler ve yayların merkezini yakalar @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Ebatlar - + Shows temporary dimensions when snapping to Arch objects Yay nesneleri yakalandığında geçici olarak ölçülerini gösterir @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Bitiş noktası - + Snaps to endpoints of edges Kenarların (Çizgilerin) bitiş (uç) noktalarını yakalar @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Uzantı - + Snaps to extension of edges Kenarların (Çizgilerin) uzantılarını yakalar @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Izgara - + Snaps to grid points Izgara noktalarını yakalar @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Kesişim - + Snaps to edges intersections Kenarların (Çizgilerin) kesişim noktaları yakalar @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Yakalama Modu Aktif/Pasif - + Activates/deactivates all snap tools at once Tüm yakalama araçları Etkinleştirir/devre dışı bırakır - + Lock Kilitle @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Orta nokta - + Snaps to midpoints of edges Kenarların (Çizgilerin) orta noktalarını yakalar @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest En Yakın - + Snaps to nearest point on edges Kenarların (Çizgilerin) yanın noktalarını yakalar @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orto - + Snaps to orthogonal and 45 degrees directions Dikey ve 45 dereceli doğrultuları yakalar @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Koşut - + Snaps to parallel directions of edges Kenarların (Çizgilerin) paralel doğrultularını yakalar @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Dik - + Snaps to perpendicular points on edges Kenarların (Çizgilerin) dik doğrultularını yakalar @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Özel - + Snaps to special locations of objects Nesnelerin özel konumlarını yakalar @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Çalışma Düzlemi - + Restricts the snapped point to the current working plane Yakalanan noktayı geçerli çalışma düzlemi ile sınırlar @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Ayır - + Splits a wire into two wires Bir kabloyu iki parçaya ayırır @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Uzat - + Stretches the selected objects Seçili nesneleri uzatır @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Metin - + Creates an annotation. CTRL to snap Bir elips oluşturur. Nokta Yakalamak için CTRL @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Sonraki nesneler için inşa kipini değiştirir - + Toggle Construction Mode İnşa Modunu Değiştir @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Devam moduna geç - + Toggles the Continue Mode for next commands. Sonraki komutlar için Devam Modunu değiştirir. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Ekran modunu aç / kapat - + Swaps display mode of selected objects between wireframe and flatlines Seçilen nesnelerin ekran modunu tel kafes ve düz çizgiler arasında değiştirir @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Izgarayı(klavuzu) Aç/Kapa - + Toggles the Draft grid on/off Taslak ızgarasının görünürlüğünü değiştir - + Grid Izgara - + Toggles the Draft grid On/Off Taslak Izgarasını Aç/Kapat ayarını değiştir @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Seçilen nesneyi kırpar veya uzatır ya da tekil yüzleri katılar(kalınlık verir). CTRL Nokta Yakalar, SHIFT mevcut segmente ya da normale kısıtlar, ALT tersine çevirir @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Son segmenti geri alır - + Undoes the last drawn segment of the line being drawn Çizilen çizginin son çizilen parçasını geri alır @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Güncelle - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Seçili nesneleri bir içine katılır ya da dolu yüzleri kapalı teller dönüştürür veya yüzler birleştiren - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Bir VisGroup ekler - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Çok noktalı TaslakTel DraftWire (DWire) oluşturur. Nokta Yakalama için CTRL, sınırlamak için ÜSTKRKT + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Telden B-spline oluştur - + Converts between Wire and B-spline Tel ve B-spline arasında dönüştürür @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Genel Taslak Ayarları - + This is the default color for objects being drawn while in construction mode. Bu, inşa kipinde çizine nesneler için varsayılan renktir. - + This is the default group name for construction geometry Bu, inşa geometrisi için varsayılan grup adıdır. - + Construction İnşa @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainOturumlar arası kullanım için mevcut rengi ve çizgi kalınlığını sakla - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Eğer bu işaretli ise, kopyalama kipi, uçbirimler arasında kullanılabilir olacaktır, aksi durumda uçbirimler her zaman kopyalanamaz kipte başlayacaktır - + Global copy mode Genel kopyalama kipi - + Default working plane Varsayılan çalışma düzlemi - + None Hiçbiri - + XY (Top) XY (Üst) - + XZ (Front) XZ (Ön) - + YZ (Side) YZ (tarafı) @@ -1986,12 +2021,12 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Genel ayarlar - + Construction group name Yapı grup adı - + Tolerance Tolerans @@ -2016,22 +2051,22 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Burada standart Taslak(Draft) tarama şablonlarına eklenebilen, <pattern> tanımlaması içeren SVG dosyalarını barındıran bir dizin seçebilirsiniz - + Draft interface mode Taslak arabirimi modu - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Taslak modülü çalışacak arayüz modu budur: Araç çubuğu modu, yer tüm taslak ayarları için ayrı bir araç çubuğu yerleştirecektir, Araç çubuğu modu, tüm kullanıcı etkileşimleri için FreeCAD Görev penceresi sistemini kullanacaktır - + Toolbar Araç çubuğu - + Taskview Görev Penceresi @@ -2061,12 +2096,12 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Alt mod - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalde, nesneleri kopyaladıktan sonra kopya seçili kalır. Bu seçenek seçili ise, bunun yerine temel nesneler seçili olacaktır. - + Select base objects after copying Kopyaladıktan sonra temel nesneleri seç @@ -2101,7 +2136,7 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Ana çizgiler daha kalın çizilecektir. Şimdi burada ana çizgiler arasında kaç kare olacağını belirleyiniz. - + Internal precision level Dahili duyarlık düzeyi @@ -2216,12 +2251,12 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Beyaz çizgi rengini siyaha çevir - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Bu seçiliyse, taslak araçlar bölümü basit taslak nesneleri, kullanılabilir olduğunda yerine oluşturur. - + Use Part Primitives when available Kısım temel öğeler kullanılabilir olduğunda kullanın @@ -2241,12 +2276,7 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Unsurları her zaman yakala (unsur yakalama modu devre dışı) - - Construction geometry - Yapı geometrisi - - - + Construction geometry color Yapı geometrisi @@ -2386,7 +2416,7 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Grip Dosyasını Seçin - + Fill objects with faces whenever possible Nesneleri ile karşı karşıya mümkün olduğunca doldurmak @@ -2676,7 +2706,7 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a Otomatik olarak güncelle (yalnızca içe aktarım kalıntıları) - + Prefix labels of Clones with: Klon ile önek etiketleri: @@ -2713,7 +2743,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Bu SVG nesne renk FreeCAD almak için seçilmiş olan yönteme bağlıdır. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Seçiliyse, nesneler varsayılan olarak doldurulmuş olarak görünür. Aksi takdirde, tel kafes görünecektir @@ -2793,17 +2823,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Seçiliyse, aynı katmanlardan nesneler Taslak bloklarında birleştirilecektir, görüntü hızlanır ama onları düzenlemek daha az kolay olacaktır - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Eğer bu seçiliyse, Taslak komutlarını çalıştırırken Çıktı Penceresinde adım adım yönergeler görüntülenir. - - - - Verbose command line mode - Ayrıntılı komut satırı modu - - - + When drawing lines, set focus on Length instead of X coordinate Çizgileri çizerken, X koordinatı yerine Uzunluk üzerine odak koyun @@ -2883,710 +2903,857 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Maksimum düzlem dilimi: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Dahili koordinat işlemlerinde ondalık sayısı (örneğin, 3 = 0,001). 6 ile 8 arasındaki değerler genellikle FreeCAD kullanıcıları arasında en iyi takas sayılır. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Tolerans kullanan fonksiyonların kullandığı değer budur. +Bu değerin altında farklılık gösteren değerler aynı şekilde ele alınacaktır. Bu değer yakında kullanılmayacak, böylece yukarıdaki hassasiyet seviyesi her ikisini de kontrol edebilecek. Use legacy python exporter - Use legacy python exporter + Eski python dışa aktarımcısını kullanın + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Yapı Geometrisi + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Göreceli + + + + R + R + + + + Continue + Devam + + + + T + T + + + + Close + Kapat + + + + O + O + + + + Copy + Kopyala + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Doldur + + + + L + L + + + + Exit + Çıkış + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Uzunluk + + + + H + H + + + + Wipe + Temizle + + + + W + W + + + + Set WP + WP ayarla + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Kısıtla X + + + + X + X + + + + Restrict Y + Kısıtla Y + + + + Y + Y + + + + Restrict Z + Kısıtla Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Taslak Yakalama Araçları - - - Draft creation tools - Taslak çizim araçları - - - - Draft modification tools - Taslak değişiklik araçları - - - - Utilities - Yard. Uygulamalar - - - - Wire tools - Tel Araçları - - - - Snapping - Yakalama - draft - + not shape found bulundu şekil - + All Shapes must be co-planar Tüm şekiller co-düzlemsel olmalıdır - + The given object is not planar and cannot be converted into a sketch. Verilen nesne düzlemsel değil ve bir eskize dönüştürülemez. - + Unable to guess the normal direction of this object Bu nesne normal yönünü tahmin edilemiyor - + Draft Command Bar Taslak komut çubuğu - + Toggle construction mode İnşa Modunu Değiştir - + Current line color Geçerli çizgi rengi - + Current face color Geçerli çizgi rengi - + Current line width Geçerli çizgi rengi - + Current font size Geçerli yazı tipi boyutu - + Apply to selected objects Seçili nesnelere uygulayın - + Autogroup off Autogroup kapalı - + active command: Etkin söz dizisi: - + None Hiçbiri - + Active Draft command Aktif Çizim komutu - + X coordinate of next point Bir sonraki noktanın X koordinatı - + X X - + Y Y - + Z Z - + Y coordinate of next point Bir sonraki noktanın Y koordinatı - + Z coordinate of next point Bir sonraki noktanın Z koordinatı - + Enter point Nokta gir - + Enter a new point with the given coordinates Yeni bir noktası verilen koordinatlarla girin - + Length Uzunluk - + Angle Açı - + Length of current segment Geçerli kesimin uzunluğu - + Angle of current segment Geçerli kesimin uzunluğu - + Radius Yarıçap - + Radius of Circle Çemberin Yarıçapı - + If checked, command will not finish until you press the command button again Eğer işaretliyse, komut tekrar komut tuşuna basana kadar bitmeyecek - + If checked, an OCC-style offset will be performed instead of the classic offset Bu onay kutusu seçiliyse, klasik kaydırmanın yerine OCC-tarzı kaydırma gerçekleştirilecek - + &OCC-style offset &amp; OCC tarzı ofset - + Add points to the current object Etkin nesneye noktalar ekle - + Remove points from the current object Etkin nesneden noktalar kaldır - + Make Bezier node sharp Keskin Bezier düğümü yapmak - + Make Bezier node tangent Keskin Bezier düğümü yapmak - + Make Bezier node symmetric Keskin Bezier düğümü yapmak - + Sides Kenarlar - + Number of sides Yüzlerin sayısı - + Offset Uzaklaşma - + XY (top) XY(üst) - - Select XY plane - XY düzlemini seçin - - - + XZ (front) XZ (ön) - - Select XZ plane - XZ düzlemini seçin - - - + YZ (side) YZ (yan) - - Select YZ plane - YZ düzlemini seçin - - - + View Görünüm - - Select plane perpendicular to the current view - Geçerli görünüşe dik düzlemi seçin - - - + Auto Otomatik - - Do not project points to a drawing plane - Çizim düzlemine noktaların izdüşümünü almayın - - - + Text string to draw Çizmek için metin dizesi - + String Dize - + Height of text Satır yüksekliği - + Height Yükseklik - + Intercharacter spacing Arası karakter aralığı - + Tracking İzleme - + Full path to font file: Yazı tipi dosyasının tam yolu: - + Open a FileChooser for font file Bir FileChooser için yazı tipi dosyası aç - + Grid spacing Izgara aralığı - + The spacing between the grid lines Her bir kılavuz çizgisi arasındaki mesafe - + Main line every Ana çizgiler her - + The number of lines between main lines Ana hatları arasında satırlarının sayısı - + Center plane on view Görünümde düzlem merkezi - - Select Plane - Düzlemi seçin - - - + Line Çizgi - + DWire DWire - + Circle Çember - + Center X Merkez X - + Arc Yay - + Point Nokta - + Label Etiket - + Distance Uzaklık - + Trim Kırp - + Pick Object Nesne Seç - + Edit Düzenle - + Global X Evrensel X - + Global Y Evrensel Y - + Global Z Evrensel Z - + Local X Yerel X - + Local Y Yerel Y - + Local Z Yerel Z - + Invalid Size value. Using 200.0. Geçersiz boyut değeri. 200.0 kullanarak. - + Invalid Tracking value. Using 0. Geçersiz izleme değeri. 0 kullanarak. - + Please enter a text string. Lütfen geçerli bir Url dizesi girin. - + Select a Font file Font dosyası seç - + Please enter a font file. Lütfen geçerli bir başlık giriniz. - + Autogroup: Autogroup: - + Faces Yüzler - + Remove Kaldır - + Add Ekle - + Facebinder elements Yüz kaplama elemanları - + Create Line Çizgi oluştur - - Pick next point: - - Bir sonraki noktayı seçin: - - - - + Convert to Wire Tel'e dönüştür - + BSpline BSpline - + BezCurve Çan eğrisi - + Create BezCurve Bezier eğrisi oluştur - + Rectangle Dikdörtgen - + Create Plane Düzlem oluştur - + Create Rectangle Dikdörtgen oluştur - + Create Circle Çember oluştur - + Create Arc Yay oluştur - + Start Angle Başlangıç açısı - + Aperture Açıklık - + Polygon Çokgen - + Create Polygon Çokgen oluştur - + Ellipse Elips - + Create Ellipse Elips Oluştur - + Text Metin - + Create Text Metin oluştur - + Dimension Boyut - + Create Dimension Boyut oluştur - + ShapeString Şekil dizesi - + Create ShapeString Şekil dizesi oluştur - + Copy Kopyala - + Move Taşı - + Change Style Stil Değiştir - + Rotate Döndür - - Cannot offset this object type - - Bu nesne türü kaydırılamaz - - - + Stretch Uzat - + Upgrade Güncelle - + Downgrade Önceki sürüme dön - + Selection is not a Knot Seçilen bir düğüm değil - + Convert to Sketch Eskize Dönüştür - + Convert to Draft Taslağa dönüştür - + Convert Dönüştür - + Array Dizi - + Create Point Nokta Oluştur - + Mirror Ayna - + &Draft &Taslak @@ -3610,179 +3777,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabını verin. - + Draft.makeBSpline: not enough points Draft.makeBSpline: yeterli nokta yok - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Eş uç noktalar kapamaya zorlandı - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Geçersiz nokta listesi - + No object given Nesne yok - + The two points are coincident İki nokta çakışık - + Found groups: closing each open object inside Bulunan gruplar: içindeki her açık nesneyi kapatılıyor - + Found mesh(es): turning into Part shapes Bulunan Mesh(ler): Parça şekillerine dönüşüyor - + Found 1 solidifiable object: solidifying it Katılaştırılabilir 1 nesne bulundu: Katılaştırılıyor - + Found 2 objects: fusing them 2 Nesne bulundu: eritiliyorlar - + Found several objects: creating a shell Birkaç nesne bulundu: bir kabuk oluşturuluyor - + Found several coplanar objects or faces: creating one face Birçok eş düzlemli nesne veya yüz bulundu: bir yüzey oluşturuluyor - + Found 1 non-parametric objects: draftifying it Parametrik olmayan 1 nesne bulundu: tasarlanıyor - + Found 1 closed sketch object: creating a face from it Kapalı 1 eskiz nesnesi bulundu: ondan bir yüzey oluşturuluyor - + Found 1 linear object: converting to line Doğrusal 1 nesne bulundu: Çizgiye dönüştürülüyor - + Found closed wires: creating faces Kapalı teller/kafesler bulundu: Yüzeyler oluşturuluyor - + Found 1 open wire: closing it 1 açık tel bulundu: kapatılsın mı - + Found several open wires: joining them Bir çok açık tel bulundu: onlar birleştirilsin mi - + Found several edges: wiring them Birkaç kenar bulundu: onlar Telleniyor (kafesleniyor) - + Found several non-treatable objects: creating compound Birkaç iyileştirilemeyen nesne bulundu: Bileşik oluşturuluyor - + Unable to upgrade these objects. Bu nesneler yükseltilemiyor. - + Found 1 block: exploding it 1 blok bulundu: o patlatılıyor - + Found 1 multi-solids compound: exploding it 1 çoklu-katı bileşiği bulundu: o patlatılıyor - + Found 1 parametric object: breaking its dependencies 1 parametrik nesne bulundu: onun bağımlılıkları bozuluyor - + Found 2 objects: subtracting them 2 nesne bulundu: onlar çıkarılıyor - + Found several faces: splitting them Birkaç yüzey bulundu: onlar ayrılıyor - + Found several objects: subtracting them from the first one Birçok nesne bulundu: onlar ilkinden çıkarılıyor - + Found 1 face: extracting its wires 1 yüzey bulundu: o tellere ayıklanıyor - + Found only wires: extracting their edges Sadece teller bulundu: kenarlarına ayıklanıyor - + No more downgrade possible Daha fazla versiyon düşürme mümkün değil - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Aynı ilk / son nokta ile kapatıldı. Geometri güncellenmedi. - + No point found Bulunan Nokta Yok - + ShapeString: string has no wires ShapeString: dize tel içermiyor - + Relative Göreceli - + Continue Devam - + Close Kapat @@ -3827,7 +3994,7 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Kısıtla Z - + Select edge Kenarı seç @@ -3842,7 +4009,7 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Uzunluk modu - + Wipe Temizle @@ -3857,513 +4024,636 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Döngüsel yakalama nesnesi - + Check this to lock the current angle Geçerli açıyı kilitlemek için bunu kontrol edin - + Coordinates relative to last point or absolute Son noktaya veya Kesin'e (mutlak'a) göre Koordinatlar - + Filled Dolu - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Nesnenin dolu görünmesi gerekiyor ise bunu kontrol edin, aksi halde tel kafes olarak görünecektir - - - + Finish Bitir - + Finishes the current drawing or editing operation Geçerli çizim veya düzenleme işlemini sonlandırır - + &Undo (CTRL+Z) Geri Al (Ctrl+Z) - + Undo the last segment Son segmenti geri al - + Finishes and closes the current line Geçerli çizgiyi kapatır ve sonlandırır - + Wipes the existing segments of this line and starts again from the last point Bu çizginin mevcut bölümlerini siler ve son noktadan tekrar başlar - + Set WP WP ayarla - + Reorients the working plane on the last segment Son segmentteki çalışma düzlemini yeniden yönlendirir - + Selects an existing edge to be measured by this dimension Bu ebat tarafından ölçülecek mevcut bir kenar seçer - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands İşaretlenirse, taşınacaklar yerine nesneler kopyalanacaktır. Tercihler -> Taslak -> Evrensel Kopyalama modu için bu modu sonraki komutlarda sürdür - - options - seçenekler - - - + Default Varsayılan - + Pick a face to define the drawing plane Çizim düzlemini tanımlamak için bir yüzey seçin - - First point: - İlk Nokta: - - - - Closing - Kapatılıyor - - - + Create Wire Tel oluştur - - Removing last point - Son nokta kaldırılıyor - - - - Next point: - Sonraki nokta: - - - - Restarting from - ...dan tekrar başlatılıyor - - - + Unable to create a Wire from selected objects Seçilen nesnelerden bir Tel oluşturulamıyor - + Spline has been closed Eğri kapatıldı - + Last point has been removed Son nokta kaldırıldı - - Pick next point, or Finish (shift-F) or close (o): - Sonraki nokta seçin veya Sonlandırın (shift-F) ya da kapatın (o): - - - + Create B-spline B-spline'ı yarat - + Bezier curve has been closed Bezier eğrisi kapatıldı - - Pick first point: - İlk noktayı seçin: - - - - Pick opposite point: - Karşıt noktayı seçin: - - - - Pick center point: - Merkez noktasını seçin: - - - - Pick radius: - Yarıçapı seçin: - - - - Pick start angle: - Başlangıç açısını seçin: - - - - Pick aperture: - Aralığı seçin: - - - - Aperture angle: - Aralık açısı: - - - - Pick location point: - Konum noktasını seçin: - - - + Edges don't intersect! Kenarlar kesişmiyor! - + Pick ShapeString location point: ShapeString konum noktasını seçin: - + Select an object to move Taşımak için bir nesneyi seçin - - Pick start point: - Başlangıç noktasını seçin: - - - - Pick end point: - Bitiş noktasını seçin: - - - + Select an object to rotate Döndürmek için bir nesne seçin - - Pick rotation center: - Döndürme merkezini seçin: - - - - Pick base angle: - Taban açısını seçin: - - - - Pick rotation angle: - Döndürme açısını seçin: - - - + Select an object to offset Ötelemek için bir nesneyi seçin - + Offset only works on one object at a time Öteleme bir defada yalnız tek bir nesnede çalışır - + Sorry, offset of Bezier curves is currently still not supported Üzgünüz, Bezier eğrilerinin ötelenmesi şu anda hala desteklenmiyor - - Pick distance: - Mesafe seçin: - - - + Select an object to stretch Uzatmak için bir nesne seçin - - Pick first point of selection rectangle: - Seçim dikdörtgeninin ilk noktasını seçin: - - - - Pick opposite point of selection rectangle: - Seçim dikdörtgeninin karşıt noktasını seçin: - - - - Pick start point of displacement: - Deplasman başlangıç noktasını seçin: - - - - Pick end point of displacement: - Deplasman bitiş noktasını seçin: - - - + Turning one Rectangle into a Wire Dikdörtgeni bir Tele Dönüştür - + Select an object to join Birleştirmek için bir nesne seçin - + Join Birleştir - + Select an object to split Bölmek için bir nesne seçin - + Select an object to upgrade Yükseltmek için bir nesne seçin - + Select object(s) to trim/extend Kırpmak/genişletmek için nesneleri seçin - + Unable to trim these objects, only Draft wires and arcs are supported Bu nesneler kırpılamıyor, sadece Taslak teller ve yaylar destekleniyor - + Unable to trim these objects, too many wires Bu nesneler kırpılamıyor, çok fazla tel içeriyor - + These objects don't intersect Bu nesneler kesişmiyor - + Too many intersection points Çok fazla çakışma noktası - + Select an object to scale Boyutlandırmak için bir nesne seçin - - Pick base point: - Başlangıç noktasını seçin: - - - - Pick reference distance from base point: - Temel noktasından referans mesafesi seçin: - - - - Pick new distance from base point: - Temel noktasından yeni mesafeyi seçin: - - - + Select an object to project Yansıtılacak bir nesne seçin - - This object type is not editable - Nesne tipi düzenlenebilir değil - - - + Please select only one object Lütfen sadece bir nesne seçiniz - + Select a Draft object to edit Düzenlemek için bir taslak nesneyi seçin - + Active object must have more than two points/nodes Etkin nesnenin ikiden fazla puan / düğüm olması gerekir - + Endpoint of BezCurve can't be smoothed BezCurve bitiş noktası düzeltilemez - + Select an object to convert Dönüştürmek için bir nesne seçin - + Select an object to array Dizilemek için bir nesne seçin - + Please select base and path objects Lütfen temel ve noktalistesi nesnelerini seçin - + Please select base and pointlist objects Lütfen temel ve noktalistesi nesnelerini seçin - + Select an object to clone Çoğaltmak için bir nesne seçin - + Select face(s) on existing object(s) Varolan nesne(ler) üzerinde seçin yüz(ler) seçin - + Select an object to mirror Aynalamak için bir nesne seçin - - Pick start point of mirror line: - Aynalama hattının başlangıç noktasını seçin: - - - - Pick end point of mirror line: - Aynalama hattının bitim noktasını seçin: - - - + This tool only works with Wires and Lines Bu araç yalnız Teller ve Çizgiler ile çalışır - - - Pick target point: - Hedef Noktası seçin: - - - - Pick endpoint of leader line: - Kılavuz çizginin bitiş noktasını seçin: - - - - Pick text position: - Metin konumunu seçin: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (eski adıyla Teigha) Dosya Dönüştürücüsü bulunamadı, DWG desteği devre dışı bırakıldı - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s, %d diğer nesnelerle bir tabanı paylaşır. Lütfen bunu değiştirmek isteyip istemediğinizi kontrol edin. Subelement mode - Subelement mode + AltSeçim modu - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Yarıçapı ve açıları yayı düzenleyerek değiştir - + Modify subelements - Modify subelements + AltElemanları değiştir - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + İşaretlenirse, nesnelerin tamamı yerine alt öğeler değiştirilir - + CubicBezCurve - CubicBezCurve + KübikBezierEğrisi - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Bazı alt öğeler taşınamadı. - + Scale Ölçek - + Some subelements could not be scaled. - Some subelements could not be scaled. + Bazı alt öğeler ölçeklenemedi. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + Duvar tabanı taslağını düzenlemek için çok karmaşık: doğrudan taslağını düzenlemeniz önerilir + + + + Top + üst + + + + Front + Ön + + + + Side + Yan + + + + Current working plane + Mevcut çalışma düzlemi + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Otomatik + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Dönüş + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Düzenlenecek nesneyi seçin + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Taslak + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Yard. Uygulamalar + + + + Wire tools + Tel Araçları + + + + Snapping + Yakalama diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index c3285b980f..cf6886b743 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index c49caba8f2..9728940a4c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Визначає шаблон штрихування - + Sets the size of the pattern Встановлює розмір зразка [pattern] - + Startpoint of dimension Початкова точка вимірювання - + Endpoint of dimension Кінцева точка вимірювання - + Point through which the dimension line passes Точка проходження розмірної лінії - + The object measured by this dimension Об'єкт зміни розміру - + The geometry this dimension is linked to Геометрія цього розміру пов'язана з - + The measurement of this dimension Вимірювання цього розміру - + For arc/circle measurements, false = radius, true = diameter Для дуг та окружностей: хибно — радіус, істинно — діаметр - + Font size Розмір шрифту - + The number of decimals to show Показати кількість десяткових знаків - + Arrow size Розмір стрілки - + The spacing between the text and the dimension line Відступ тексту від розмірної лінії - + Arrow type Тип стрілки - + Font name Назва шрифту - + Line width Ширина лінії - + Line color Колір лінії - + Length of the extension lines Довжина виносних ліній - + Rotate the dimension arrows 180 degrees Поворот стрілок розміру на 180 градусів - + Rotate the dimension text 180 degrees Поворот тексту з розміром на 180 градусів - + Show the unit suffix Показати суфікс одиниці - + The position of the text. Leave (0,0,0) for automatic position Розташування тексту. Залишити (0,0,0) для автоматичного розташування - + Text override. Use $dim to insert the dimension length Текст заміщення. Використайте $dim, щоб вставити зазначення довжини - + A unit to express the measurement. Leave blank for system default Одинці виміру. Залиште пустим для використання системних за замовчуванням - + Start angle of the dimension Початковий кут розміру - + End angle of the dimension Кінцевий кут розміру - + The center point of this dimension Центральна точка розміру - + The normal direction of this dimension Нормальний напрямок розміру - + Text override. Use 'dim' to insert the dimension length Текст заміщення. Використайте $dim, щоб вставити зазначення довжини - + Length of the rectangle Довжина прямокутника - + Radius to use to fillet the corners Радіус скруглення кутів - + Size of the chamfer to give to the corners Розмір фаски кутів - + Create a face Створи грань - + Defines a texture image (overrides hatch patterns) Задати текстурне зображення (заміняє шаблон штрихування) - + Start angle of the arc Початковий кут дуги - + End angle of the arc (for a full circle, give it same value as First Angle) Кінцевий кут дуги (для повного кола, задайте таке ж значення як початковий кут) - + Radius of the circle Радіус кола - + The minor radius of the ellipse Мала напів-вісь еліпса - + The major radius of the ellipse Велика напів-вісь еліпса - + The vertices of the wire Вершини каркасу - + If the wire is closed or not Якщо каркас закритий чи ні - + The start point of this line Початкова точка цієї лінії - + The end point of this line Кінцева точка цієї лінії - + The length of this line Довжина цієї лінії - + Create a face if this object is closed Створити грань, якщо цей об'єкт замкнений - + The number of subdivisions of each edge Кількість ділень кожного ребра - + Number of faces Кількість граней - + Radius of the control circle Радіус контрольного кола - + How the polygon must be drawn from the control circle Як має бути зображений багатокутник по відношенню до контрольного кола - + Projection direction Напрямок проекції - + The width of the lines inside this object Товщина ліній всередині об'єкту - + The size of the texts inside this object The size of the texts inside this object - + The spacing between lines of text Відстань між рядками тексту - + The color of the projected objects Колір проектованого об'єкту - + The linked object Пов'язаний об'єкт - + Shape Fill Style Тип заливки фігури - + Line Style Стиль лінії - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed Створити грань, якщо сплайн замкнутий - + Parameterization factor Фактор параметризації - + The points of the Bezier curve Точки кривої Безьє - + The degree of the Bezier function Ступінь функції Безье - + Continuity Неперервність - + If the Bezier curve should be closed or not Якщо крива Безьє має бути замкнута або ні - + Create a face if this curve is closed Створити грань, якщо ця крива замкнута - + The components of this block Складові цього блоку - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object Вектор проекції цього об'єкту - + The way the viewed object must be projected - The way the viewed object must be projected + Спосіб, яким об'єкт, що розглядається, має бути спроектованим - + The indices of the faces to be projected in Individual Faces mode Індекси поверхонь, які мають бути спроектовані у режимі Individual Faces - + Show hidden lines Відобразити приховані рядки - + The base object that must be duplicated Базовий об'єкт, який має бути задубльованим - + The type of array to create Тип масиву, що створюється - + The axis direction Напрямок осей - + Number of copies in X direction Кількість копій у напрямку осі X - + Number of copies in Y direction Кількість копій у напрямку осі Y - + Number of copies in Z direction Кількість копій у напрямку осі Z - + Number of copies Кількість копій - + Distance and orientation of intervals in X direction Відстань і орієнтація інтервалів у напрямку осі X - + Distance and orientation of intervals in Y direction Відстань і орієнтація інтервалів у напрямку осі Y - + Distance and orientation of intervals in Z direction Відстань і орієнтація інтервалів у напрямку осі Z - + Distance and orientation of intervals in Axis direction Відстань і орієнтація інтервалів у напрямку осей координат - + Center point Точка центру - + Angle to cover with copies Кут для покриття копіями - + Specifies if copies must be fused (slower) Вказується коли копії мають бути злиті (повільніше) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj - Selected subobjects (edges) of PathObj + Вибрані підоб'єкти (ребра) PathObj - + Optional translation vector Опціональний вектор переміщення - + Orientation of Base along path Orientation of Base along path - + X Location Розташування по осі X - + Y Location Розташування по осі Y - + Z Location Розташування по осі Z - + Text string Текстовий рядок - + Font file name Ім'я файлу зі шрифтом - + Height of text Висота тексту - + Inter-character spacing Міжсимвольна відстань - + Linked faces Зв'язані поверхні - + Specifies if splitter lines must be removed Визначається якщо розділяючі лінії мають бути видалені - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Висота прямокутника - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object Розміщення цього об'єкта - + The display length of this section plane Довжина відображення цієї площини перерізу - + The size of the arrows of this section plane Розмір стрілок цієї площини перерізу - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment Довжина прямого сенменту - + The point indicated by this label Точка позначена цією міткою - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label - The target object of this label + Цільовий об'єкт цієї мітки - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label - The text displayed by this label + Текст, відображений цією міткою - + The size of the text Розмір тексту - + The font of the text Шрифт тексту - + The size of the arrow Розмір стрілки - + The vertical alignment of the text Вертикальне вирівнювання тексту - + The type of arrow of this label Тип стрілки цієї позначки - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Колір тексту - + The maximum number of characters on each line of the text box Максимальна кількість символів в кожному рядку текстового поля - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline Точки B-сплайну - + If the B-spline is closed or not Якщо B-сплайн замкнений або ні - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base Основа - + PointList Список точок - + Count Кількість - + The objects included in this clone The objects included in this clone - + The scale factor of this clone Масштабний множник цього клону - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Міжрядковий інтервал (по відношенню до розміру шрифту) - + The area of this object - The area of this object + Площа цього об'єкту - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Відображає символ вимірювання у кінці ламаної - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Нахил - + Scale Масштабування - + Writing camera position Запис положення камери - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X коефіцієнт - + Y factor Y коефіцієнт - + Z factor Z коефіцієнт - + Uniform scaling Рівномірне масштабування - + Working plane orientation Орієнтація робочої площини @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat Цей каркас вже є плоским - + Pick from/to points Оберіть від/до точки - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + Клонувати + DraftShapeStringGui @@ -851,7 +891,7 @@ from menu Tools -> Addon Manager Reset 3d point selection - Reset 3d point selection + Скинути вибір 3d точки @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Додає вибрані об'єкти до групи Construction @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point Додати Точку - + Adds a point to an existing Wire or B-spline Додає точку до існуючої Ламаної або B-сплайна @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Перемістити до групи... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style Застосувати поточний стиль - + Applies current line width and color to selected objects Застосувати поточну ширину лінії та колір до обраного об'єкту @@ -914,46 +954,46 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc Дуга - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Створює дугу за центром та радіусом. CTRL для прив'язки, SHIFT для стримування Draft_ArcTools - + Arc tools - Arc tools + Інструменти подудови дуг Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Дуга за 3 точками - + Creates an arc by 3 points - Creates an arc by 3 points + Створює дугу за 3 точками Draft_Array - + Array Масив - + Creates a polar or rectangular array from a selected object Створює круговий або прямокутний масив з обраного об'єкту @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup АвтоГрупування - + Select a group to automatically add all Draft & Arch objects to Select a group to automatically add all Draft & Arch objects to @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-сплайн - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve Крива Безьє - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Створює криву Безьє. CTRL для захоплення, SHIFT для обмеження @@ -1000,20 +1040,20 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools - Bezier tools + Інструменти для побудови кривої Безьє Draft_Circle - + Circle Коло - + Creates a circle. CTRL to snap, ALT to select tangent objects Створює коло. CTRL для прив’язки, ALT, для вибору дотичної @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone Клонувати - + Clones the selected object(s) Клони вибраного об'єкту(ів) @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line Закрити лінію - + Closes the line being drawn Закриває лінію, що креслиться @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Видалити Точку - + Removes a point from an existing Wire or B-spline Видаляє точку з існуючої Ламаної або B-сплайна @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Розмірність - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Створює розмірність. CTRL для прив'язки, SHIFT для обмеження, ALT для вибору сегмента @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Понизити - + Explodes the selected objects into simpler objects, or subtracts faces Руйнує обрані об'єкти до простіших, або віднімає поверхні @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Креслення у Ескіз - + Convert bidirectionally between Draft and Sketch objects Конвертувати двонаправлено між об'єктами Draft та Sketch @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Малюнок - + Puts the selected objects on a Drawing sheet Розміщує обрані об'єкти на аркуш креслення @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Правка - + Edits the active object Редагування активного об'єкта @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Еліпс - + Creates an ellipse. CTRL to snap Створити еліпс. CTRL для захоплення @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Зібрання поверхонь - + Creates a facebinder object from selected face(s) Поєднати обрані поверхні у зібрання @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Завершити лінію - + Finishes a line without closing it Завершення лінії без її закриття @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Обернений напрямок написання розміру - + Flip the normal direction of a dimension Обернути нормальний напрямок написання розміру @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Виправити - + Heal faulty Draft objects saved from an earlier FreeCAD version Виправити пошкоджене креслення об'єкту, який був збережений у попередній версії FreeCAD @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join З'єднати - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Позначка - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Лінія - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Створює лінію по 2-м точкам. Використовуйте CTRL для прив'язки, SHIFT для обмеження @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Віддзеркалити - + Mirrors the selected objects along a line defined by two points Віддзеркалити обрані об'єкти вздовж лінії, яка визначена двома точками @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Переміщення - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Зміщення - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Зміщення активного об'єкта.CTRL для прив'язки, SHIFT для обмеження, ALT для копіювання @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Масив вздовж направляючої - + Creates copies of a selected object along a selected path. Створює копії обраного об'єкту вздовж обраної траєкторії. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Точка - + Creates a point object Створює об'єкт точка @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Багатокутник - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Створює вірний багатокутник. CTRL для прив'язки, SHIFT для обмеження @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Прямокутник - + Creates a 2-point rectangle. CTRL to snap Створює прямокутник по 2 точкам. CTRL для прив'язки @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Обертання - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Обертання обраних об'єктів. CTRL для прив'язки, SHIFT, для обмеження, ALT для створення копії @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Масштабування - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Масштабує обрані об'єкти з базової точки. CTRL, для прив'язки, SHIFT, для обмеження, ALT для копіювання @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Обрати групу - + Selects all objects with the same parents as this group Обрати всі об’єкти, які були породжені такими самими групами, як і ця @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Вибір площини - + Select a working plane for geometry creation Вибір робочої площини для створення геометрії @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D вигляд фігури - + Creates Shape 2D views of selected objects Створює 2D види обраних об'єктів @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Показати панель прив'язування - + Shows Draft snap toolbar Показати панель інструментів прив'язки креслення @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Встановити нахил - + Sets the slope of a selected Line or Wire Встановлює нахил вибраної Лінії або ламаної @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Кути - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Центр - + Snaps to center of circles and arcs Прив'язати до центру кола або дуги @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Розміри - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Кінцева точка - + Snaps to endpoints of edges Прив'язати кінцеві точки до ребер @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Розширення - + Snaps to extension of edges Прив'язати до подовження ребер @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Сітка - + Snaps to grid points Прив'язати до сітки точок @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Перетин - + Snaps to edges intersections Прив'язати до перетину ребер @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Вкл./викл. прив'язки - + Activates/deactivates all snap tools at once Активувати/деактивувати всі прив'язки одразу - + Lock Зафіксувати @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Середня точка - + Snaps to midpoints of edges Прив'язати до середніх точок ребер @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Найближчий - + Snaps to nearest point on edges Прив'язати до найближчої точки на ребрах @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Орто - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Паралельно - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Перпендикулярно - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Особливий - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Робоча площина - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Розділити - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Розтягнути - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Текст - + Creates an annotation. CTRL to snap Створює анотацію. CTRL для прив'язки @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Перехід в режим конструювання для наступних об'єктів. - + Toggle Construction Mode Змінити режим конструювання @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode for next commands. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Переключити режим відображення - + Swaps display mode of selected objects between wireframe and flatlines Перемикає режим відображення обраних об’єктів між каркасним та рівними лініями @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Показати або приховати сітку - + Toggles the Draft grid on/off Toggles the Draft grid on/off - + Grid Сітка - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Обрізати або подовжити обраний об'єкт чи витиснену окрему поверхню. CTRL - прив'язка, SHIFT - обмежити поточним сегментом або нормаллю, ALT - інвертувати @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Скасувати останній сегмент - + Undoes the last drawn segment of the line being drawn Скасовує останній накреслений сегмент лінії @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Оновлення - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Об'єднує обрані об'єкти в один, або перетворює замкнуті ламані в суцільні грані, або об'єднує грані - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Adds a VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Конвертує Ламану в B-сплайн та навпаки @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Загальні налаштування креслення - + This is the default color for objects being drawn while in construction mode. Стандартний колір для об’єктів створюваних в режимі конструктора. - + This is the default group name for construction geometry Стандартне ім’я групи для конструкції - + Construction Конструкція @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainЗберігати поточний колір та ширину лінії між сеансами - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Якщо встановлено, режим копіювання буде зберігатися між командами, в іншому випадку команди будуть завжди починатися в режимі "не копіювати" - + Global copy mode Режим глобального копіювання - + Default working plane Стандартна робоча площина - + None Немає - + XY (Top) XY (Зверху) - + XZ (Front) XZ (З переду) - + YZ (Side) YZ (З боку) @@ -1988,12 +2023,12 @@ such as "Arial:Bold" Загальні параметри - + Construction group name Назва групи конструкцій - + Tolerance Точність @@ -2018,22 +2053,22 @@ such as "Arial:Bold" Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns - + Draft interface mode Режим інтерфейсу креслення - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Це режим інтерфейсу користувача, в якому модуль креслення буде працювати: режим панелі інструментів буде містити усі налаштування креслення, тоді як режим панелі задач буде використовувати систему перегляду задач FreeCAD для всіх взаємодій з користувачем - + Toolbar Панель інструментів - + Taskview Taskview @@ -2063,12 +2098,12 @@ such as "Arial:Bold" Alt-режим - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Зазвичай, після копіювання об'єктів, вибраними стають копії. Якщо встановлена ця опція, вибраними будуть початкові об'єкти. - + Select base objects after copying Після копіювання вибрати початкові об'єкти @@ -2103,7 +2138,7 @@ such as "Arial:Bold" Mainlines will be drawn thicker. Specify here how many squares between mainlines. - + Internal precision level Рівень внутрішньої точності @@ -2218,12 +2253,12 @@ such as "Arial:Bold" Перетворити білий колір лінії у чорний - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available Use Part Primitives when available @@ -2243,12 +2278,7 @@ such as "Arial:Bold" Always snap (disable snap mod) - - Construction geometry - Допоміжна геометрія - - - + Construction geometry color Колір допоміжної геометрії @@ -2388,7 +2418,7 @@ such as "Arial:Bold" Обрати файл шрифту - + Fill objects with faces whenever possible Fill objects with faces whenever possible @@ -2678,7 +2708,7 @@ such as "Arial:Bold" Automatic update (legacy importer only) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2717,7 +2747,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2797,17 +2827,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2887,12 +2907,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2903,694 +2923,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Продовжити + + + + T + T + + + + Close + Закрити + + + + O + O + + + + Copy + Копіювати + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Заповнити + + + + L + L + + + + Exit + Вихід + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Довжина + + + + H + H + + + + Wipe + Витерти + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Y + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Прив'язка креслення - - - Draft creation tools - Інструменти створення ескізу - - - - Draft modification tools - Інструменти редагування ескізу - - - - Utilities - Утиліти - - - - Wire tools - Інструменти каркасу - - - - Snapping - Прив'язка - draft - + not shape found not shape found - + All Shapes must be co-planar Усі Фігури мають бути компланарними - + The given object is not planar and cannot be converted into a sketch. The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar Панель команд креслення - + Toggle construction mode Змінити режим конструювання - + Current line color Колір поточної лінії - + Current face color Колір поточної поверхні - + Current line width Ширина поточної лінії - + Current font size Розмір поточного шрифта - + Apply to selected objects Застосувати до вибраних об'єктів - + Autogroup off Автогрупування вимкнено - + active command: активна команда: - + None Немає - + Active Draft command Активна команда креслення - + X coordinate of next point X координати наступної точки - + X X - + Y Y - + Z Z - + Y coordinate of next point Y координати наступної точки - + Z coordinate of next point Z координати наступної точки - + Enter point Введіть точку - + Enter a new point with the given coordinates Задати нову точку з вказаними координатами - + Length Довжина - + Angle Кут - + Length of current segment Довжина поточного сегменту - + Angle of current segment Кут поточного сегменту - + Radius Радіус - + Radius of Circle Радіус кола - + If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset Зміщення у &OCC-стилі - + Add points to the current object Додати точку до поточного об'єкта - + Remove points from the current object Видалити точки з поточного об'єкту - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + Sides Сторони - + Number of sides Кількість сторін - + Offset Зміщення - + XY (top) XY (зверху) - - Select XY plane - Вибір XY площини - - - + XZ (front) XZ (спереду) - - Select XZ plane - Вибір XZ площини - - - + YZ (side) YZ (збоку) - - Select YZ plane - Вибір YZ площини - - - + View Вигляд - - Select plane perpendicular to the current view - Вибір площини, перпендикулярної до поточної - - - + Auto Автоматично - - Do not project points to a drawing plane - Не проектувати точки на площину креслення - - - + Text string to draw Text string to draw - + String Рядок - + Height of text Висота тексту - + Height Висота - + Intercharacter spacing Міжсимвольна відстань - + Tracking Відстеження - + Full path to font file: Повний шлях до файлу шрифта: - + Open a FileChooser for font file Open a FileChooser for font file - + Grid spacing Розмір сітки - + The spacing between the grid lines The spacing between the grid lines - + Main line every Основна лінія кожні - + The number of lines between main lines Кількість ліній між основними лініями - + Center plane on view Center plane on view - - Select Plane - Вибір площини - - - + Line Лінія - + DWire DWire - + Circle Коло - + Center X Центр X - + Arc Дуга - + Point Точка - + Label Позначка - + Distance Відстань - + Trim Обрізати - + Pick Object Вкажіть об'єкт - + Edit Правка - + Global X Глобальна X - + Global Y Глобальна Y - + Global Z Глобальна Z - + Local X Локальна X - + Local Y Локальна Y - + Local Z Локальна Z - + Invalid Size value. Using 200.0. Неприпустиме значення розміру. Буде використано 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Введіть рядок тексту, будь ласка. - + Select a Font file Обрати файл шрифту - + Please enter a font file. Введіть файл шрифта, будь ласка. - + Autogroup: Autogroup: - + Faces Грані - + Remove Видалити - + Add Додати - + Facebinder elements Facebinder elements - + Create Line Створити лінію - - Pick next point: - - Вкажіть наступну точку: - - - - + Convert to Wire Convert to Wire - + BSpline B-сплайн - + BezCurve Крива Безьє - + Create BezCurve Створити криву Безьє - + Rectangle Прямокутник - + Create Plane Створити площину - + Create Rectangle Створити прямокутник - + Create Circle Створити коло - + Create Arc Створити дугу - + Start Angle Початковий кут - + Aperture Діафрагма - + Polygon Багатокутник - + Create Polygon Створити багатокутник - + Ellipse Еліпс - + Create Ellipse Створити еліпс - + Text Текст - + Create Text Створити текст - + Dimension Розмірність - + Create Dimension Створити розмір - + ShapeString ShapeString - + Create ShapeString Create ShapeString - + Copy Копіювати - + Move Переміщення - + Change Style Змінити стиль - + Rotate Обертання - - Cannot offset this object type - - Неможливо змістити цей тип об'єкта - - - + Stretch Розтягнути - + Upgrade Оновлення - + Downgrade Понизити - + Selection is not a Knot Виділений елемент не є вузол - + Convert to Sketch Перетворити на ескіз - + Convert to Draft Перетворити на креслення - + Convert Перетворити - + Array Масив - + Create Point Створити точку - + Mirror Віддзеркалити - + &Draft &Ескіз @@ -3614,179 +3781,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given Об'єкт не задано - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found Точок не знайдено - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Продовжити - + Close Закрити @@ -3831,7 +3998,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict Z - + Select edge Оберіть ребро @@ -3846,7 +4013,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - + Wipe Витерти @@ -3861,454 +4028,279 @@ To enabled FreeCAD to download these libraries, answer Yes. Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish Завершити - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default За замовчуванням - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - Перша точка: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Наступна точка: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Сплайн було замкнено - + Last point has been removed Останню точку було видалено - - Pick next point, or Finish (shift-F) or close (o): - Оберіть наступну точку, або Закінчити (shift-F) або закрити (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Криву Безьє було закрито - - Pick first point: - Вкажіть першу точку: - - - - Pick opposite point: - Вкажіть протилежну точку: - - - - Pick center point: - Вкажіть точку центру: - - - - Pick radius: - Вибрати радіус: - - - - Pick start angle: - Вибрати початковий кут: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Ребра не перетинаються! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Оберіть об'єкт для переміщення - - Pick start point: - Вкажіть початкову точку: - - - - Pick end point: - Вибрати кінцеву точку: - - - + Select an object to rotate Оберіть об'єкт для обертання - - Pick rotation center: - Вкажіть центр обертання: - - - - Pick base angle: - Вибрати базисний кут: - - - - Pick rotation angle: - Вкажіть кут обертання: - - - + Select an object to offset Оберіть об'єкт для зміщення - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Вибачте, зміщення кривої Безьє на даний момент все ще не підтримується - - Pick distance: - Вибрати відстань: - - - + Select an object to stretch Оберіть об'єкт для розтягування - - Pick first point of selection rectangle: - Вкажіть першу точку прямокутника вибору: - - - - Pick opposite point of selection rectangle: - Вкажіть протилежну точку прямокутника вибору: - - - - Pick start point of displacement: - Вкажіть початкову точку зміщення: - - - - Pick end point of displacement: - Вкажіть кінцеву точку зміщення: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Оберіть обʼєкт для зʼєднання - + Join З'єднати - + Select an object to split Оберіть обʼєкт для розділення - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Оберіть об'єкт(и) для підрізання/подовження - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect Ці об'єкти не перетинаються - + Too many intersection points Забагато точок перетину - + Select an object to scale Оберіть об'єкт для масштабування - - Pick base point: - Вкажіть базову точку: - - - - Pick reference distance from base point: - Вкажіть відносну відстань від базової точки: - - - - Pick new distance from base point: - Вкажіть нову відстань від базовоої точки: - - - + Select an object to project Оберіть об'єкт для створення проєкції - - This object type is not editable - Цей об'єкт не редагується - - - + Please select only one object Будь ласка, оберіть тільки один об'єкт - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Оберіть об'єкт для перетворення - + Select an object to array Оберіть об'єкт для створення масиву - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Оберіть об'єкт для клонування - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Оберіть об'єкт для дзеркального відображення - - Pick start point of mirror line: - Вкажіть початкову точку лінії дзеркала: - - - - Pick end point of mirror line: - Вкажіть кінцеву точку лінії дзеркала: - - - + This tool only works with Wires and Lines Цей інструмент працює лише з ламаними та прямими - - - Pick target point: - Вкажіть цільову точку: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Вказати положення тексту: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4318,56 +4310,354 @@ To enabled FreeCAD to download these libraries, answer Yes. Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Масштабування - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Згори + + + + Front + Фронт + + + + Side + Сторона + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Автоматичний + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Поворот + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Креслення + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Утиліти + + + + Wire tools + Інструменти каркасу + + + + Snapping + Прив'язка + diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index 7f33a10afc..54dcde9a2c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 5fef6e93d1..2b1b582890 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Defineix un patró d'ombrejat - + Sets the size of the pattern Defineix la mida del patró - + Startpoint of dimension Punt d'inici de la dimensió - + Endpoint of dimension Punt final de la dimensió - + Point through which the dimension line passes Punt per on passa la línia de dimensió - + The object measured by this dimension L'objecte mesurat per aquesta dimensió - + The geometry this dimension is linked to La geometria d'aquesta dimensió està vinculada amb - + The measurement of this dimension La mesura d'aquesta dimensió - + For arc/circle measurements, false = radius, true = diameter Mesures de l'arc/cercle, falses=radi, veritat=diàmetre - + Font size Mida del tipus de lletra - + The number of decimals to show El nombre de decimals que cal mostrar - + Arrow size Mida de la fletxa - + The spacing between the text and the dimension line L'espaiat entre el text i la línia de dimensió - + Arrow type Tipus de fletxa - + Font name Nom de la font - + Line width Amplària de línia - + Line color Color de línia - + Length of the extension lines Llargària de les línies d'extensió - + Rotate the dimension arrows 180 degrees Gira les fletxes de dimensió 180 graus - + Rotate the dimension text 180 degrees Gira el text de dimensió 180 graus - + Show the unit suffix Mostra el sufix de la unitat - + The position of the text. Leave (0,0,0) for automatic position La posició del text. Deixeu (0,0,0) per a la posició automàtica al centre - + Text override. Use $dim to insert the dimension length Invalidació del text. Utilitza $dim per a inserir la llargària de la dimensió - + A unit to express the measurement. Leave blank for system default Una unitat per a expressar la mesura. Deixa en blanc per defecte del sistema - + Start angle of the dimension Angle inicial de la dimensió - + End angle of the dimension Angle final de la dimensió - + The center point of this dimension El punt central d'aquesta dimensió - + The normal direction of this dimension La direcció normal d'aquesta dimensió - + Text override. Use 'dim' to insert the dimension length Invalidació del text. Utilitza 'esmorteix' per a inserir la longitud de la dimensió - + Length of the rectangle Llargària del rectangle - + Radius to use to fillet the corners Radi que cal utilitzar per a arredonir els cantons - + Size of the chamfer to give to the corners Mida del xamfrà que cal donar als cantons - + Create a face Crea una cara - + Defines a texture image (overrides hatch patterns) Defineix una imatge de textura (ignoraels patrons de trama) - + Start angle of the arc Angle de començament de l'arc - + End angle of the arc (for a full circle, give it same value as First Angle) Angle final de l'arc (per a un cercle complet, dona-li el valor del primer angle) - + Radius of the circle Radi de la cercle - + The minor radius of the ellipse El radi menor de l'el·lipse - + The major radius of the ellipse El radi major de l'el·lipse - + The vertices of the wire Els vèrtexs del filferro - + If the wire is closed or not Si el filferro està tancat o no - + The start point of this line El punt de partida d'aquesta línia - + The end point of this line El punt final d'aquesta línia - + The length of this line La llargària d'aquesta línia - + Create a face if this object is closed Crear una cara si aquest objecte s'està tancat - + The number of subdivisions of each edge El nombre de subdivisions de cada aresta - + Number of faces Nombre de cares - + Radius of the control circle Radi de la circumferència de control - + How the polygon must be drawn from the control circle Com el polígon ha de ser extret del cercle de control - + Projection direction Direcció de la projecció - + The width of the lines inside this object L'amplària de les línies dins d'aquest objecte - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + The spacing between lines of text L'espaiat entre línies de text - + The color of the projected objects El color dels objectes projectats - + The linked object L'objecte enllaçat - + Shape Fill Style Estil d'emplenament de forma - + Line Style Estil de línia - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D - + Create a face if this spline is closed Crear una cara si aquest objecte s'està tancat - + Parameterization factor Factor de parametrització - + The points of the Bezier curve Els punt de la corba Bezier - + The degree of the Bezier function Els graus de la funció Bezier - + Continuity Continuïtat - + If the Bezier curve should be closed or not Si la corba Bezier s'ha de tancar o no - + Create a face if this curve is closed Crea una cara si aquesta corba està tancada - + The components of this block Els components d'aquest bloc - + The base object this 2D view must represent L'objecte base que ha de representar aquesta visualització 2D - + The projection vector of this object Projecció vectorial d'aquest objecte - + The way the viewed object must be projected La manera en què l'objecte visualitzat ha de ser projectat - + The indices of the faces to be projected in Individual Faces mode Els índexs de les cares per a projectar en el mode cares individuals - + Show hidden lines Mostra les línies amagades - + The base object that must be duplicated L'objecte de base que s'ha de duplicat - + The type of array to create El tipus de matriu a crear - + The axis direction La direcció de l'eix - + Number of copies in X direction Nombre de còpies en la direcció X - + Number of copies in Y direction Nombre de còpies en la direcció Y - + Number of copies in Z direction Nombre de còpies en la direcció Z - + Number of copies Nombre de còpies - + Distance and orientation of intervals in X direction Distància i orientació d'intervals en direcció X - + Distance and orientation of intervals in Y direction Distància i orientació d'intervals en direcció Y - + Distance and orientation of intervals in Z direction Distància i orientació d'intervals en direcció Z - + Distance and orientation of intervals in Axis direction Distància i orientació d'intervals en la direcció de l'eix - + Center point Punt central - + Angle to cover with copies Angle per a cobrir amb còpies - + Specifies if copies must be fused (slower) Especifica si les còpies s'han de fusionat (més lent) - + The path object along which to distribute objects L'objecte camí al llarg del qual distribuir objectes - + Selected subobjects (edges) of PathObj Seleccionats subobjects (arestes) de PathObj - + Optional translation vector Vector de translació opcional - + Orientation of Base along path Orientació de Base al llarg del camí - + X Location Ubicació X - + Y Location Ubicació Y - + Z Location Ubicació Z - + Text string Cadena de text - + Font file name Nom de fitxer de tipus de lletra - + Height of text Alçària del text - + Inter-character spacing Espaiat entre caràcters - + Linked faces Cares enllaçades - + Specifies if splitter lines must be removed Especifica si cal eliminar línies de separació - + An optional extrusion value to be applied to all faces Un valor opcional d'extrusió per a aplicar a totes les cares - + Height of the rectangle Alçària del rectangle - + Horizontal subdivisions of this rectangle Subdivisió horitzontal del rectangle - + Vertical subdivisions of this rectangle Subdivisió vertical del rectangle - + The placement of this object La posició d'aquest objecte - + The display length of this section plane La longitud que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Per als modes Cutlines i Cutfaces, açò deixa les cares en la ubicació de tall - + The base object is the wire, it's formed from 2 objects L'objecte base és el filferro, està format per 2 objectes - + The tool object is the wire, it's formed from 2 objects L'objecte eina és el filferro, està format per 2 objectes - + The length of the straight segment La llargària del segment recte - + The point indicated by this label El punt indicat per aquesta etiqueta - + The points defining the label polyline Els punts que defineixen la polilínia de l'etiqueta - + The direction of the straight segment La direcció del segment recte - + The type of information shown by this label El tipus d'informació mostrat per aquesta etiqueta - + The target object of this label L'objecte objectiu d'aquesta etiqueta - + The text to display when type is set to custom El text que es mostra quan aquest tipus està definit com a personalitzat - + The text displayed by this label El text mostrat per aquesta etiqueta - + The size of the text La mida del text - + The font of the text El tipus de lletra del text - + The size of the arrow La mida de la fletxa - + The vertical alignment of the text L'alineació vertical del text - + The type of arrow of this label El tipus de fletxa d'aquesta etiqueta - + The type of frame around the text of this object El tipus de marc al voltant del text d'aquest objecte - + Text color Color del text - + The maximum number of characters on each line of the text box El màxim nombre de caràcters de cada línia de la caixa de text - + The distance the dimension line is extended past the extension lines La distància de la línia de dimensió s'estén més enllà de les línies d'extensió - + Length of the extension line above the dimension line La llargària de la línia d'extensió per damunt de la línia de dimensió - + The points of the B-spline Els punts de la B-spline - + If the B-spline is closed or not Si la B-spline està tancada o no - + Tessellate Ellipses and B-splines into line segments Encaixa a la perfecció El·lipses i B-splines en segments de línia - + Length of line segments if tessellating Ellipses or B-splines into line segments Llargària dels segments de línia si s'està encaixant a la perfecció el·lipses o B-Splines en segments de línia - + If this is True, this object will be recomputed only if it is visible Si és cert, aquest objecte es tornarà a calcular sols si és visible - + Base Base - + PointList Llista de punts - + Count Nombre - + The objects included in this clone Els objectes inclosos en aquest clon - + The scale factor of this clone El factor d'escala d'aquest clon - + If this clones several objects, this specifies if the result is a fusion or a compound Si açò clona diversos objectes, açò especifica si el resultat és una fusió o una composició - + This specifies if the shapes sew Especifica si les formes es cusen - + Display a leader line or not Mostra una línia guia o no - + The text displayed by this object El text que mostra aquest objecte - + Line spacing (relative to font size) Interlineat (relatiu a la mida del tipus de lletra) - + The area of this object - The area of this object + L'àrea d'aquest objecte - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + Mostra un símbol de dimensió a l'extrem del filferro - + Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Fusiona el mur i els objectes estructurals del mateix tipus i material + + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer Draft - + Slope Pendent - + Scale Redimensiona - + Writing camera position S'està escrivint la posició de la càmera - + Writing objects shown/hidden state S'està escrivint l'estat mostra/oculta dels objectes - + X factor Factor X - + Y factor Factor Y - + Z factor Factor Z - + Uniform scaling Escalat uniforme - + Working plane orientation Orientació del pla de treball @@ -781,20 +816,25 @@ Instal·leu el complement de la llibreria dxf mitjançant l'opció Eines ->Gestor de complements - + This Wire is already flat Aquest filferro ja està pla - + Pick from/to points Tria des de/ cap a punts - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Pendent que cal donar als filferros/línies: 0=horitzontal, 1=45graus amunt, -1=45 graus avall + + + Create a clone + Crea un clon + DraftShapeStringGui @@ -846,28 +886,28 @@ mitjançant l'opció Eines ->Gestor de complements Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Introduïu les coordenades o seleccioneu un punt amb el ratolí. Reset 3d point selection - Reset 3d point selection + Reinicia la selecció d'un punt 3D Reset Point - Reset Point + Reinicia el punt Draft_AddConstruction - + Add to Construction group Afig al Grup de Construcció - + Adds the selected objects to the Construction group Afig els objectes seleccionats al grup de Construcció @@ -875,12 +915,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_AddPoint - + Add Point Afig punt - + Adds a point to an existing Wire or B-spline Afig un punt a un filferro existent o a una B-spline @@ -888,12 +928,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_AddToGroup - + Move to group... Mou al grup... - + Moves the selected object(s) to an existing group Mou el(s) objecte(s) seleccionat(s) a un grup existent @@ -901,12 +941,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_ApplyStyle - + Apply Current Style Aplica l'estil actual - + Applies current line width and color to selected objects Aplica l'amplària i color de la línia actual als objectes seleccionats @@ -914,46 +954,46 @@ mitjançant l'opció Eines ->Gestor de complements Draft_Arc - + Arc Arc - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain - Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + Crea un arc a partir del punt central i el radi. Ctrl per a ajustar, Maj. per a restringir Draft_ArcTools - + Arc tools - Arc tools + Eines d'arquitectura Draft_Arc_3Points - + Arc 3 points - Arc 3 points + Arc de 3 punts - + Creates an arc by 3 points - Creates an arc by 3 points + Crea un arc que passe per tres punts Draft_Array - + Array Matriu - + Creates a polar or rectangular array from a selected object Crea una matriu rectangular o polar d'un objecte seleccionat @@ -961,12 +1001,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_AutoGroup - + AutoGroup Agrupa automàticament - + Select a group to automatically add all Draft & Arch objects to Seleccioneu un grup per hi afegir automàticament tots els objectes Esborrany i Arquitectura @@ -974,12 +1014,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Crea una B-spline de múltiples punts. Ctrl per ajustar, Maj. per a restringir @@ -987,12 +1027,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_BezCurve - + BezCurve Corba Bézier - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Crea una corba Bezier. Ctrl per a ajustar, Maj. per a restringir @@ -1000,20 +1040,20 @@ mitjançant l'opció Eines ->Gestor de complements Draft_BezierTools - + Bezier tools - Bezier tools + Eines Bézier Draft_Circle - + Circle Cercle - + Creates a circle. CTRL to snap, ALT to select tangent objects Crea un cercle. Ctrl per a ajustar, Alt per a seleccionar objectes tangents @@ -1021,12 +1061,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_Clone - + Clone Clona - + Clones the selected object(s) Clona l'objecte o objectes seleccionat(s) @@ -1034,12 +1074,12 @@ mitjançant l'opció Eines ->Gestor de complements Draft_CloseLine - + Close Line Tanca la línia - + Closes the line being drawn Tanca la línia que s'està dibuixant @@ -1047,27 +1087,27 @@ mitjançant l'opció Eines ->Gestor de complements Draft_CubicBezCurve - + CubicBezCurve - CubicBezCurve + CorbaBézierCúbica - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain - Creates a Cubic Bezier curve -Click and drag to define control points. CTRL to snap, SHIFT to constrain + Crea una corba Bézier cúbica +Feu clic i arrossegueu per a definir punts de control. Ctrl per a ajustar, Maj. per a restringir Draft_DelPoint - + Remove Point Eliminar punt - + Removes a point from an existing Wire or B-spline Elimina un punt d'un filferro o d'una B-spline existent @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Dimensió - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crea una dimensió. CTRL per a ajustar, Maj. per a restringir, Alt per a seleccionar un segment @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Retrograda - + Explodes the selected objects into simpler objects, or subtracts faces Descompon els objectes seleccionats en objectes més simples, o sostrau les cares @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Esborrany per a esbós - + Convert bidirectionally between Draft and Sketch objects Conversió bidireccional entre objectes esborrany i esbós @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Dibuix - + Puts the selected objects on a Drawing sheet Posa els objectes seleccionats en un full de Dibuix @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Edita - + Edits the active object Edita l'objecte actiu @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - Edit Improved + Edició millorada - + Edits the selected objects - Edits the selected objects - - - - Select an object to edit - Select an object to edit + Edita els objectes seleccionats Draft_Ellipse - + Ellipse El·lipse - + Creates an ellipse. CTRL to snap Crea una el·lipse. CTRL per a ajustar @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Galeria de cares - + Creates a facebinder object from selected face(s) Crear un objecte galeria de cares a partir de cara(es) seleccionada(es) @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Acaba la línia - + Finishes a line without closing it Acaba una línia sense tancar-la @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Inverteix la dimensió - + Flip the normal direction of a dimension Inverteix la direcció normal d'una dimensió @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Repara - + Heal faulty Draft objects saved from an earlier FreeCAD version Repara objectes esborrany defectuosos guardats d'una versió anterior FreeCAD @@ -1223,38 +1258,51 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join - Join + Unió - + Joins two wires together - Joins two wires together + Uneix dos filferros Draft_Label - + Label Etiqueta - + Creates a label, optionally attached to a selected object or element Crea una etiqueta, opcionalment lligada a l'objecte o element seleccionat + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Línia - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crea una línia de 2 punts. Ctlr per ajustar, Maj. per a restringir @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Espill - + Mirrors the selected objects along a line defined by two points Reflecteix els objectes seleccionats seguint una línia definida per dos punts @@ -1275,25 +1323,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Mou - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain + Mou els objectes seleccionats entre 2 punts. Ctrl per a ajustar, Maj. per a restringir Draft_Offset - + Offset Separació - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Separa l'objecte actiu. Ctrl per a ajustar, maj. per a restringir, Alt per a copiar @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Matriu de camins - + Creates copies of a selected object along a selected path. Crea còpies d'un objecte seleccionat al llarg una ruta seleccionada. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Punt - + Creates a point object Crea un objecte punt @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray Matriu de Punts - + Creates copies of a selected object on the position of points. Crea còpies d'un objecte seleccionat en la posició dels punts. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Polígon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crea un polígon regular. Ctrl per a ajustar, Maj. per a restringir @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Rectangle - + Creates a 2-point rectangle. CTRL to snap Crea un rectangle donat per 2 punts. Ctrl per a ajustar @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Gira - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Gira els objectes seleccionats. Ctrl per a ajustar, maj. per a restringir, Alt crea una còpia @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Redimensiona - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Redimensiona els objectes seleccionats des d'un punt base. Ctrl per a ajustar, maj. per a restringir, Alt per a copiar @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Selecciona un grup - + Selects all objects with the same parents as this group Selecciona tots els objectes amb els mateixos pares que aquest grup @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Selecciona pla - + Select a working plane for geometry creation Seleccioneu un pla de treball per a la creació de la geometria @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Crea un objecte servidor intermediari des del pla de treball actual - + Create Working Plane Proxy Crea un servidor intermediari d'un Pla de Treball @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Visualització de forma 2D - + Creates Shape 2D views of selected objects Crea visualitzacions de formes 2D dels objectes seleccionats @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Forma a partir de text... - + Creates text string in shapes. Crea una cadena de text en les formes. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Mostra la barra d'ajusts - + Shows Draft snap toolbar Mostra la barra d'eines d'ajust de l'esborrany @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Defineix el pendent - + Sets the slope of a selected Line or Wire Estableix el pendent d'una línia o filferro seleccionats @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Ajusta a 45 i 90 graus els punts sobre arcs i cercles @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Centre - + Snaps to center of circles and arcs Ajusta al centre de cercles i dels arcs @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Mostra les dimensions temporals quan ajusta objectes als arcs @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Punt final - + Snaps to endpoints of edges Ajusta els extrems de les arestes @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Extensió - + Snaps to extension of edges S' ajusta a l'extensió de les arestes @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Quadrícula - + Snaps to grid points S' ajusta als punts de la quadrícula @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Intersecció - + Snaps to edges intersections S' ajusta a les interseccions de les arestes @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Commuta activa/desactiva - + Activates/deactivates all snap tools at once Activa/desactiva totes les eines d'ajust a la vegada - + Lock Bloqueja @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Punt mig - + Snaps to midpoints of edges S' ajusta als punts migs de les arestes @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Més proper - + Snaps to nearest point on edges S'ajusta al punt més proper en les arestes @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Orto - + Snaps to orthogonal and 45 degrees directions S' ajusta a direccions ortogonals i de 45 graus @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Paral·lel - + Snaps to parallel directions of edges S' ajusta a direccions paral·leles de les arestes @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges S'ajusta als punts perpendiculars de les arestes @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special - Special + Especial - + Snaps to special locations of objects Ajusta en ubicacions especials d'objectes @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Pla de treball - + Restricts the snapped point to the current working plane Restringeix el punt d'ajustament al pla de treball actual @@ -1683,25 +1731,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Divideix - + Splits a wire into two wires - Splits a wire into two wires + Divideix un filferro en dos filferros Draft_Stretch - + Stretch - Stretch + Estira - + Stretches the selected objects Estirar els objectes seleccionats @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Crea una anotació. Ctlr per a ajustar @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Activa/desactiva el mode de construcció per a objectes propers. - + Toggle Construction Mode Activa/desactiva el mode Construcció @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Activa/desactiva el mode Continua - + Toggles the Continue Mode for next commands. Activa/desactiva el mode Continua per a les ordres següents. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Activa/desactiva el mode de visualització - + Swaps display mode of selected objects between wireframe and flatlines Intercanvia el mode de mostrar els objectes seleccionats entre models de malla i línies planes @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Activa/desactiva la quadrícula - + Toggles the Draft grid on/off Activa/desactiva la quadrícula de l'Esborrany - + Grid Quadrícula - + Toggles the Draft grid On/Off Activa/desactiva la quadrícula de l'Esborrany @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Retalla o s'estén l'objecte seleccionat o extrudeix cares individuals. Ctrl ajusta, maj. restringeix al segment actual o normal, Alt inverteix @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Desfés l'últim segment - + Undoes the last drawn segment of the line being drawn Desfà l'últim segment dibuixat de la línia que s'està dibuixant @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Actualitza - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Uneix els objectes seleccionats en un de sol, o converteix els filferros tancats en cares, o uneix cares - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Afig a VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crea un DraftWire (DWire) de punts múltiples. Ctrl per a ajustar, Maj. per a restringir + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Filferro a B-splines - + Converts between Wire and B-spline Converteix entre Filferro i B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Paràmetres generals de l'esborrany - + This is the default color for objects being drawn while in construction mode. Aquest es el color predeterminat per als objectes que s'estan dibuixant en el mode de construcció. - + This is the default group name for construction geometry Aquest es el nom predeterminat del grup per a la geometria de la construcció - + Construction Construcció @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainGuarda el color actual i la grossària de les línies en totes les sessions - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Si està marcada, el mode copia es mantindrà d'una ordre a l'altra, en cas contrari les ordres sempre s'iniciaran en el mode no-còpia - + Global copy mode Mode de còpia global - + Default working plane Pla de treball per defecte - + None Cap - + XY (Top) XY (dalt) - + XZ (Front) XZ (Frontal) - + YZ (Side) YZ (Side) @@ -1985,12 +2020,12 @@ such as "Arial:Bold" Paràmetres generals - + Construction group name Nom del grup de construcció - + Tolerance Tolerància @@ -2015,22 +2050,22 @@ such as "Arial:Bold" Podeu especificar un directori d'arxius SVG que continga definicions <pattern> que es poden afegir als patrons estàndards de trama d'esborranys - + Draft interface mode Mode d'interfície d'esborrany - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Aquest és el mode d'interfície d'usuari en què treballarà el mòdul Esborrany: el mode Barra d'eines situarà tots els paràmetres d'Esborrany en una barra d'eines separada, mentre que mode Barra de tasques utilitzarà el sistema de Visualització de tasques de FreeCAD per a totes les seues interaccions amb l'usuari - + Toolbar Barra d'eines - + Taskview Visualització de tasques @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Mode Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Normalment, després de copiar objectes, selecciona les còpies. Si aquesta opció està marcada, se seleccionaran, en el seu lloc, els objectes base. - + Select base objects after copying Selecciona objectes base després de copiar @@ -2100,7 +2135,7 @@ such as "Arial:Bold" Les línies principals es dibuixaran més gruixudes. Especifiqueu ací quantsquadres entre línies principals. - + Internal precision level Nivell de precisió interna @@ -2215,12 +2250,12 @@ such as "Arial:Bold" Transforma el color balc de línia en negre - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Quan està marcada, les eines d'esborrany crearan peces primitives en lloc d'objectes d'objectes d'esborrany, si està disponible. - + Use Part Primitives when available Utilitza els primitius de les peces si estan disponibles @@ -2240,12 +2275,7 @@ such as "Arial:Bold" Ajusta sempre (mode Ajusta desactivat) - - Construction geometry - Geometria de la construcció - - - + Construction geometry color Color de la geometria de la construcció @@ -2385,7 +2415,7 @@ such as "Arial:Bold" Seleccioneu un fitxer de tipus de lletra - + Fill objects with faces whenever possible Ompli els objectes amb cares sempre que siga possible @@ -2675,7 +2705,7 @@ such as "Arial:Bold" Actualització automàtica (sols per a l'importador llegat) - + Prefix labels of Clones with: Prefixa les etiquetes de clons amb: @@ -2712,7 +2742,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Aquest és el mètode escollit per a importar el color d'objecte SVG cap a FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Si està marcada, els objectes apareixeran plens per defecte. En cas contrari, apareixeran com a estructura metàl·lica @@ -2792,17 +2822,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Si està marcada, els objectes de les mateixes capes s'uniran en Blocs d'Esborrany, la visualització serà més ràpida, però l'edició serà més difícil - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - Si es marca aquesta opció, les instruccions es mostraran pas a pas en la finestra d'eixida quan s'executen les ordres d'esborrany - - - - Verbose command line mode - Mode de línia d'ordres detallat - - - + When drawing lines, set focus on Length instead of X coordinate Quan es dibuixen línies, estableix el focus en la llargària en lloc de en la coordenada X @@ -2874,7 +2894,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Ellipse export is poorly supported. Use this to export them as polylines instead. - Ellipse export is poorly supported. Use this to export them as polylines instead. + Exportació d'el·lipses poc compatible. En el seu lloc, utilitzeu açò per a exportar-les com a polilínies. @@ -2882,711 +2902,857 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Segment de Spline Màxim: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + El nombre de decimals en les operacions de coordenades internes (p. ex. 3 = 0,001). Els usuaris de FreeCAD consideren el millor rang els valors entre 6 i 8. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Aquest és el valor utilitzat per a funcions que utilitzen una tolerància. +Els valors amb diferències per davall d'aquest valor es tractaran com a iguals. Aquest valor prompte serà obsolet, així que el nivell de precisió superior controla ambdós. Use legacy python exporter - Use legacy python exporter + Utilitza l'exportador python llegat + + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Geometria de construcció + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relatiu + + + + R + R + + + + Continue + Continua + + + + T + T + + + + Close + Tanca + + + + O + O + + + + Copy + Copia + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Ompli + + + + L + L + + + + Exit + Ix + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Longitud + + + + H + H + + + + Wipe + Neteja + + + + W + W + + + + Set WP + Configura WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restringeix X + + + + X + X + + + + Restrict Y + Restringeix Y + + + + Y + Y + + + + Restrict Z + Restringeix Z + + + + Z + Z + + + + Grid color + Grid color Workbench - + Draft Snap Ajust de l'esborrany - - - Draft creation tools - Eines de creació d'esborrany - - - - Draft modification tools - Eines de modificació de l'esborrany - - - - Utilities - Utilitats - - - - Wire tools - Eines de filferro - - - - Snapping - Ajusta - draft - + not shape found no s'ha trobat la forma - + All Shapes must be co-planar Totes les formes han de ser coplanàries - + The given object is not planar and cannot be converted into a sketch. L'objecte donat no és planar i no es pot convertir en un esbós. - + Unable to guess the normal direction of this object No es pot endevinar la direcció normal d'aquest objecte - + Draft Command Bar Barra d'ordres de l'esborrany - + Toggle construction mode Activa/desactiva el mode de construcció - + Current line color Color de la línia actual - + Current face color Color de la cara actual - + Current line width Amplària de la línia actual - + Current font size Mida del tipus de lletra actual - + Apply to selected objects Aplica als objectes seleccionats - + Autogroup off Desactiva Auto-agrupar - + active command: ordre activa: - + None Cap - + Active Draft command Ordre d'esborrany activa - + X coordinate of next point Coordenada X del punt següent - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y del punt següent - + Z coordinate of next point Coordenada Z del punt següent - + Enter point Introduïu un punt - + Enter a new point with the given coordinates Introduïu un nou punt amb les coordenades donades - + Length Longitud - + Angle Angle - + Length of current segment Llargària del segment actual - + Angle of current segment Angle del segment actual - + Radius Radi - + Radius of Circle Radi del cercle - + If checked, command will not finish until you press the command button again Si està marcada, l'ordre no acabarà fins que premeu el botó d'ordre una altra vegada - + If checked, an OCC-style offset will be performed instead of the classic offset Si està marcada, es realitzarà una separació de tipus OCC en lloc de la separació clàssica - + &OCC-style offset Separació &OCC-style - + Add points to the current object Add points to the current object - + Remove points from the current object Elimina punts de l'objecte actual - + Make Bezier node sharp Fes un node Bezier agut - + Make Bezier node tangent Fes un node Bezier tangent - + Make Bezier node symmetric Fes un node Bezier simètric - + Sides Costats - + Number of sides Nombre de costats - + Offset Separació - + XY (top) XY (superior) - - Select XY plane - Selecciona el pla XY - - - + XZ (front) XZ (frontal) - - Select XZ plane - Selecciona el pla XZ - - - + YZ (side) YZ (costat) - - Select YZ plane - Selecciona el pla YZ - - - + View Visualitza - - Select plane perpendicular to the current view - Selecciona el pla perpendicular de la visualització actual - - - + Auto Auto - - Do not project points to a drawing plane - No projectes punts al pla de dibuix - - - + Text string to draw Text string to draw - + String Cadena - + Height of text Alçària del text - + Height Alçària - + Intercharacter spacing Espaiat entre caràcters - + Tracking Seguiment - + Full path to font file: Ruta d'accés completa a l'arxiu de tipus de lletra: - + Open a FileChooser for font file Obri un selector de fitxers per a l'arxiu de tipus de lletra - + Grid spacing Espaiat de la quadrícula - + The spacing between the grid lines L'espaiat entre les línies de la graella - + Main line every Línies principals cada - + The number of lines between main lines El nombre de línies entre les línies principals - + Center plane on view Center plane on view - - Select Plane - Seleccioneu pla - - - + Line Línia - + DWire DWire - + Circle Cercle - + Center X Centre X - + Arc Arc - + Point Punt - + Label Etiqueta - + Distance Distance - + Trim Retalla - + Pick Object Tria un objecte - + Edit Edita - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X Local - + Local Y Y Local - + Local Z Z Local - + Invalid Size value. Using 200.0. Valor de mida no vàlid. S'està utilitzant 200.0. - + Invalid Tracking value. Using 0. Valor de seguiment no és vàlid. S'està utilitzant 0. - + Please enter a text string. Introduïu una cadena de text. - + Select a Font file Seleccioneu un fitxer de tipus de lletra - + Please enter a font file. Introduïu un fitxer de tipus de lletra. - + Autogroup: Agrupa automàticament: - + Faces Cares - + Remove Elimina - + Add Afig - + Facebinder elements Elements de Galeria de cares - + Create Line Crea una línia - - Pick next point: - - Trieu el següent punt: - - - - + Convert to Wire Converteix en Filferro - + BSpline BSpline - + BezCurve Corba Bézier - + Create BezCurve Crea corba de Bézier - + Rectangle Rectangle - + Create Plane Crea un pla - + Create Rectangle Crea un rectangle - + Create Circle Crea un cercle - + Create Arc Crea un arc - + Start Angle Angle inicial - + Aperture Obertura - + Polygon Polígon - + Create Polygon Crea un polígon - + Ellipse El·lipse - + Create Ellipse Crea una el·lipse - + Text Text - + Create Text Crea un text - + Dimension Dimensió - + Create Dimension Crea dimensió - + ShapeString TextForma, ShapeString - + Create ShapeString Crea Textforma, ShapeString - + Copy Copia - + Move Mou - + Change Style Canvia l'estil - + Rotate Gira - - Cannot offset this object type - - Aquest tipus d'objectes no es pot separar - - - - + Stretch - Stretch + Estira - + Upgrade Actualitza - + Downgrade Retrograda - + Selection is not a Knot La selecció no és un nus - + Convert to Sketch Converteix en un esbós - + Convert to Draft Converteix en un esborrany - + Convert Converteix - + Array Matriu - + Create Point Crea un punt - + Mirror Espill - + &Draft & Esborrany @@ -3609,179 +3775,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí. - + Draft.makeBSpline: not enough points Draft.makeBSpline: no hi ha pro punts - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: extrems iguals forcen el tancament - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: la llista de punts no és vàlida - + No object given Cap objecte donat - + The two points are coincident Els dos punts són coincidents - + Found groups: closing each open object inside Grups trobats: tanca dins cada objecte obert - + Found mesh(es): turning into Part shapes Malla(es) trobada(es): converteix formes en peces - + Found 1 solidifiable object: solidifying it - Found 1 solidifiable object: solidifying it + S'ha trobat un objecte solidificable: solidifica'l - + Found 2 objects: fusing them Trobats 2 objectes: fusiona'ls - + Found several objects: creating a shell Trobats diversos objectes: crea una closca - + Found several coplanar objects or faces: creating one face Trobats diversos objectes o cares coplanaris: Crea una cara - + Found 1 non-parametric objects: draftifying it Trobat un objecte no-paramètric: esbossant-lo - + Found 1 closed sketch object: creating a face from it Trobat un objecte esbós tancat: Crea una cara amb ell - + Found 1 linear object: converting to line Trobat un objecte lineal: Converteix-lo en una línia - + Found closed wires: creating faces Trobats filferros tancats: Crea cares - + Found 1 open wire: closing it Trobat 1 filferro obert: tanca'l - + Found several open wires: joining them Trobats diversos filferros oberts: uneix-los - + Found several edges: wiring them Trobades diverses arestes: connecta-les - + Found several non-treatable objects: creating compound Trobats diversos objectes no tractables: crea una composició - + Unable to upgrade these objects. No es pot actualitzar aquests objectes. - + Found 1 block: exploding it Trobat un bloc: descompon-lo - + Found 1 multi-solids compound: exploding it Trobat un compost multi-sòlid: descompon-lo - + Found 1 parametric object: breaking its dependencies Trobat un objecte paramètric: trenca les seues dependències - + Found 2 objects: subtracting them Trobats dos objectes: sostrau-los - + Found several faces: splitting them Trobades diverses cares: divideix-les - + Found several objects: subtracting them from the first one Trobars diversos objectes: sostrau-los del primer - + Found 1 face: extracting its wires Trobada una cara: extrau els seus filferros - + Found only wires: extracting their edges Trobats sols filferros: extrau les arestes - + No more downgrade possible No hi ha més retrogradació possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: tancat amb el mateix primer/últim punt. La geometria no està actualitzada. - + No point found No s'ha trobat cap punt - + ShapeString: string has no wires ShapeString: la cadena no té filferros - + Relative Relatiu - + Continue Continua - + Close Tanca @@ -3826,7 +3992,7 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Restringeix Z - + Select edge Selecciona l'aresta @@ -3841,7 +4007,7 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Mode de Llargària - + Wipe Neteja @@ -3853,516 +4019,639 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí. Cycle snap object - Cycle snap object + Canvia cíclicament l'ajust d'un objecte - + Check this to lock the current angle Marqueu aquesta casella per bloquejar l'angle actual - + Coordinates relative to last point or absolute Coordenades relatives a l'últim punt o absolutes - + Filled Emplenat - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Marqueu aquesta casella si l'objecte ha d'aparéixer emplenat, si no, apareixerà com a estructura metàl·lica - - - + Finish Finalitza - + Finishes the current drawing or editing operation Acaba el dibuix actual o l'operació d'edició - + &Undo (CTRL+Z) &Desfés (CTRL+Z) - + Undo the last segment Desfés l'últim segment - + Finishes and closes the current line Finalitza i tanca la línia actual - + Wipes the existing segments of this line and starts again from the last point Esborra els segments existents d'aquesta línia i comença de nou des de l'últim punt - + Set WP Configura WP - + Reorients the working plane on the last segment Reorienta el pla de treball de l'últim segment - + Selects an existing edge to be measured by this dimension Selecciona una aresta existent per a mesurar-la amb aquesta dimensió - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands Si està activada, els objectes es copiaran en lloc de moure's. Preferències->Esborrany->Mode de còpia global per a mantenir aquest mode en les ordres següents - - options - opcions - - - + Default Per defecte - + Pick a face to define the drawing plane Tria una cara per a definir el pla de dibuix - - First point: - Primer punt: - - - - Closing - S'està tancant - - - + Create Wire Crea un Filferro - - Removing last point - Elimina l'últim punt - - - - Next point: - Punt següent: - - - - Restarting from - S'està tornant a iniciar des de - - - + Unable to create a Wire from selected objects No es pot crear un Filferro da partir dels objectes seleccionats - + Spline has been closed S'ha tancat Spline - + Last point has been removed S'ha eliminat l'últim punt - - Pick next point, or Finish (shift-F) or close (o): - Tria el punt següent, o Acaba(Maj-F) o tanca (o): - - - + Create B-spline Crea un B-spline - + Bezier curve has been closed S'ha tancat la corba Bezier - - Pick first point: - Tria el primer punt: - - - - Pick opposite point: - Tria el punt oposat: - - - - Pick center point: - Tria el punt central: - - - - Pick radius: - Trieu el radi: - - - - Pick start angle: - Trieu l'angle inicial: - - - - Pick aperture: - Trieu l'obertura: - - - - Aperture angle: - Obertura de l'angle: - - - - Pick location point: - Trieu el punt d'ubicació: - - - + Edges don't intersect! Les arestes no s'intersequen! - + Pick ShapeString location point: Tria el punt d'ubicació de ShapeString: - + Select an object to move Selecciona un objecte per a moure - - Pick start point: - Tria un punt inicial: - - - - Pick end point: - Tria un punt final: - - - + Select an object to rotate Selecciona un objecte per a girar - - Pick rotation center: - Tria el centre de rotació: - - - - Pick base angle: - Tria un angle base: - - - - Pick rotation angle: - Tria l'angle de rotació: - - - + Select an object to offset Selecciona un objecte per a separar - + Offset only works on one object at a time La separació només funciona amb un objecte cada vegada - + Sorry, offset of Bezier curves is currently still not supported La separació de les corbes Bezier encara no està disponible - - Pick distance: - Tria la distància: - - - + Select an object to stretch Selecciona un objecte per a estirar - - Pick first point of selection rectangle: - Tria el primer punt del rectangle de selecció: - - - - Pick opposite point of selection rectangle: - Tria el punt oposat del rectangle de selecció: - - - - Pick start point of displacement: - Trieu un punt inicial de desplaçament: - - - - Pick end point of displacement: - Trieu un punt final de desplaçament: - - - + Turning one Rectangle into a Wire Transforma un rectangle en un filferro - + Select an object to join - Select an object to join + Seleccioneu un objecte per a unir - + Join - Join + Unió - + Select an object to split - Select an object to split + Seleccioneu un objecte per a dividir - + Select an object to upgrade Selecciona un objecte per a actualitzar - + Select object(s) to trim/extend Selecciona objecte(s) per a acurtar/estrendre - + Unable to trim these objects, only Draft wires and arcs are supported No es poden retallar aquests objectes, sols són compatibles esborranys de filferros i arcs - + Unable to trim these objects, too many wires No es poden retallar aquests objectes, massa filferros - + These objects don't intersect Aquests objectes no s'intersequen - + Too many intersection points Massa punts d'intersecció - + Select an object to scale Selecciona un objecte per a redimensionar - - Pick base point: - Tria un punt de base: - - - - Pick reference distance from base point: - Trieu una distància de referència des del punt de base: - - - - Pick new distance from base point: - Trieu una nova distància des del punt de base: - - - + Select an object to project Selecciona un objecte per a projectar - - This object type is not editable - Aquest tipus d'objecte no es pot editar - - - + Please select only one object Seleccioneu un únic objecte - + Select a Draft object to edit Seleccioneu un objecte esborrany per a editar - + Active object must have more than two points/nodes L'objecte actiu ha de tenir més de dos punts/nodes - + Endpoint of BezCurve can't be smoothed El punt final d'una corba Bezier no es pot allisar - + Select an object to convert Seleccioneu un objecte per a convertir - + Select an object to array Seleccioneu un objecte matriu - + Please select base and path objects Seleccioneu un objecte base i una trajectòria - + Please select base and pointlist objects Seleccioneu objectes de base i de llista de punts - + Select an object to clone Seleccioneu un objecte per a clonar - + Select face(s) on existing object(s) Selecciona cara(es) d'un objecte(s) existent(s) - + Select an object to mirror Seleccioneu un objecte per a reflectir - - Pick start point of mirror line: - Trieu el punt de partida de la línia de reflexió: - - - - Pick end point of mirror line: - Trieu un punt final d'una línia espill: - - - + This tool only works with Wires and Lines Aquesta eina sols funciona amb filferros i línies - - - Pick target point: - Trieu punt de destinació: - - - - Pick endpoint of leader line: - Trieu el punt final de la línia guia: - - - - Pick text position: - Trieu la posició del text: - ODA (formerly Teigha) File Converter not found, DWG support is disabled No s'ha trobat el convertidor de fitxers ODA ( anteriorment Teigha), el suport DWG està desactivat - + %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s comparteix una base amb %d altres objectes. Comproveu si voleu modificar açò. Subelement mode - Subelement mode + Mode subelement - + Toggle radius and angles arc editing - Toggle radius and angles arc editing + Commuta l'edició del radi i de l'arc dels angles - + Modify subelements - Modify subelements + Modifica els subelements - + If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Si està marcat, els subelements es modificaran en lloc dels objectes sencers - + CubicBezCurve - CubicBezCurve + CorbaBézierCúbica - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. - Some subelements could not be moved. + Alguns subelements no es poden moure. - + Scale Redimensiona - + Some subelements could not be scaled. - Some subelements could not be scaled. + No es pot canviar la mida d'alguns subelements. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch - Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + L'esbós de la base del mur és massa complex per a editar-lo: se suggereix editar l'esbós directament + + + + Top + Planta + + + + Front + Alçat + + + + Side + Costat + + + + Current working plane + Pla de treball actual + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automàtica + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotació + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Seleccioneu un objecte per a editar + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Calat + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Utilitats + + + + Wire tools + Eines de filferro + + + + Snapping + Ajusta diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm index 54ffc8fe03..ead6e97bcc 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index 2ed9eefa0e..184d533b8f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern Xác định mẫu hatch tô vật liệu - + Sets the size of the pattern Thiết lập kích thước của mô hình - + Startpoint of dimension Điểm bắt đầu của kích thước - + Endpoint of dimension Điểm cuối của kích thước - + Point through which the dimension line passes Điểm dòng kẻ kích thước đã thông qua - + The object measured by this dimension Đối tượng được đo đạc bằng kích thước này - + The geometry this dimension is linked to Hình dạng kích thước này được liên kết với - + The measurement of this dimension Đo lường kích thước này - + For arc/circle measurements, false = radius, true = diameter Đối với phép đo vòng cung / vòng tròn, Sai = bán kính, Đúng = đường kính - + Font size Cỡ phông chữ - + The number of decimals to show Số lượng số thập phân được hiển thị - + Arrow size Kích cỡ mũi tên - + The spacing between the text and the dimension line Khoảng cách giữa các chữ và đường kích thước - + Arrow type Loại mũi tên - + Font name Tên phông chữ - + Line width Chiều rộng đường vẽ - + Line color Màu đường vẽ - + Length of the extension lines Chiều dài của đường mở rộng - + Rotate the dimension arrows 180 degrees Xoay mũi tên kích thước sang 180 độ - + Rotate the dimension text 180 degrees Xoay kích cỡ chữ sang 180 độ - + Show the unit suffix Hiển thị các đơn vị đi kèm - + The position of the text. Leave (0,0,0) for automatic position Vị trí của văn bản. Đặt (0,0,0) là vị trí tự động - + Text override. Use $dim to insert the dimension length Ghi đè văn bản. Sử dụng $dim để chèn chiều dài kích thước - + A unit to express the measurement. Leave blank for system default Đơn vị để thực hiện các phép tính đo lường. Để trống nếu sử dụng mặc định của hệ thống - + Start angle of the dimension Góc bắt đầu của kích thước - + End angle of the dimension Góc cuối của kích thước - + The center point of this dimension Trung điểm của kích thước - + The normal direction of this dimension Phương pháp tuyến của kích thước này - + Text override. Use 'dim' to insert the dimension length Ghi đè văn bản. Sử dụng $dim để chèn chiều dài kích thước - + Length of the rectangle Chiều dài của hình chữ nhật - + Radius to use to fillet the corners Bán kính để sử dụng để điền vào các góc - + Size of the chamfer to give to the corners Kích thước của các mặt vát để cung cấp cho các góc - + Create a face Tạo ra một bề mặt - + Defines a texture image (overrides hatch patterns) Xác định một hình ảnh kết cấu (ghi đè lên các mẫu vạch chéo hatch) - + Start angle of the arc Góc bắt đầu của vòng cung - + End angle of the arc (for a full circle, give it same value as First Angle) Góc kết thúc của vòng cung (cho một vòng tròn đầy đủ, có cùng giá trị như Góc đầu tiên) - + Radius of the circle Bán kính của hình tròn - + The minor radius of the ellipse Bán kính nhỏ của hình bầu dục (ellipse) - + The major radius of the ellipse Bán kính lớn của hình bầu dục (ellipse) - + The vertices of the wire Các đỉnh của dây dẫn - + If the wire is closed or not Nếu dây đóng hay mở - + The start point of this line Điểm bắt đầu của dòng này - + The end point of this line Điểm bắt đầu của dòng này - + The length of this line Chiều dài của dòng này - + Create a face if this object is closed Tạo bề mặt nếu đối tượng này bị đóng - + The number of subdivisions of each edge Số lượng phân vùng của mỗi cạnh - + Number of faces Số lượng bề mặt - + Radius of the control circle Bán kính của vòng tròn điều khiển - + How the polygon must be drawn from the control circle Làm sao để vẽ đa giác từ vòng tròn điều khiển - + Projection direction Hướng chiếu - + The width of the lines inside this object Chiều rộng của các dòng bên trong bộ phận này - + The size of the texts inside this object Kích thước của các văn bản bên trong bộ phận này - + The spacing between lines of text Khoảng cách giữa các dòng chữ - + The color of the projected objects Màu sắc của các vật thể được chiếu - + The linked object Đối tượng được liên kết - + Shape Fill Style Lấp đầy hình khối - + Line Style Kiểu đường - + If checked, source objects are displayed regardless of being visible in the 3D model Nếu được chọn, các đối tượng sẽ hiển thị bất kể chúng có hiển thị trong mô hình 3D hay không - + Create a face if this spline is closed Tạo ra một bề mặt nếu đường cong spline bị đóng - + Parameterization factor Yếu tố tham số - + The points of the Bezier curve Các điểm đường cong Bezier - + The degree of the Bezier function Mức độ chức năng Bezier - + Continuity Liên tục - + If the Bezier curve should be closed or not Nếu đường cong Bezier nên đóng hay mở - + Create a face if this curve is closed Tạo ra một bề mặt nếu đường cong bị đóng - + The components of this block Các thành phần của khối này - + The base object this 2D view must represent Đối tượng cơ sở mà chế độ 2D này đại diện - + The projection vector of this object Các vector chiếu của đối tượng này - + The way the viewed object must be projected Phương pháp chiếu được áp dụng cho các đối tượng quan sát - + The indices of the faces to be projected in Individual Faces mode Chỉ số bề mặt được chiếu trong chế độ từng bề mặt - + Show hidden lines Hiển thị những đường bị ẩn - + The base object that must be duplicated Đối tượng cơ sở đó phải được nhân đôi - + The type of array to create Kiểu dãy được chọn - + The axis direction Hướng trục - + Number of copies in X direction Số lượng bản sao trong hướng X - + Number of copies in Y direction Số lượng bản sao trong hướng Y - + Number of copies in Z direction Số lượng bản sao trong hướng Z - + Number of copies Số lượng bản sao - + Distance and orientation of intervals in X direction Khoảng cách và định hướng các khoảng theo hướng X - + Distance and orientation of intervals in Y direction Khoảng cách và định hướng các khoảng theo hướng Y - + Distance and orientation of intervals in Z direction Khoảng cách và định hướng các khoảng theo hướng Z - + Distance and orientation of intervals in Axis direction Khoảng cách và định hướng các khoảng theo hướng trục - + Center point Trung điểm - + Angle to cover with copies Bao phủ góc bằng bản sao - + Specifies if copies must be fused (slower) Chỉ định nếu bản sao phải được hợp nhất (chậm hơn) - + The path object along which to distribute objects Dùng đối tượng phương tuyến để phân phối các đối tượng - + Selected subobjects (edges) of PathObj Chọn subobjects (cạnh) của PathObj - + Optional translation vector Tuỳ chọn dịch thuật vector - + Orientation of Base along path Định hướng cơ sở dọc theo phương tuyến - + X Location Vị trí X - + Y Location Vị trí Y - + Z Location Vị trí Z - + Text string Chuỗi văn bản - + Font file name Tên tập phông - + Height of text Chiều cao phông chữ - + Inter-character spacing Khoảng cách giữa các kí tự - + Linked faces Liên kết bề mặt - + Specifies if splitter lines must be removed Xác định nếu dòng splitter cần phải loại bỏ - + An optional extrusion value to be applied to all faces Giá trị ép đùn tùy chọn sẽ được áp dụng cho tất cả các bề mặt - + Height of the rectangle Chiều dài của hình chữ nhật - + Horizontal subdivisions of this rectangle Phân mục ngang của hình chữ nhật này - + Vertical subdivisions of this rectangle Phân mục dọc của hình chữ nhật này - + The placement of this object Vị trí của đối tượng này - + The display length of this section plane Chiều dài hiển thị của mặt cắt này - + The size of the arrows of this section plane Kích thước mũi tên chỉ hướng của mặt cắt này - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location Đối với chế độ Cutline và Cutfaces, điều này có có nghĩa là Cắt ở các vị trí bề mặt - + The base object is the wire, it's formed from 2 objects Đối tượng cơ bản là dây, nó được hình thành từ 2 đối tượng - + The tool object is the wire, it's formed from 2 objects Các đối tượng công cụ là dây, nó được hình thành từ 2 đối tượng - + The length of the straight segment Chiều dài của đoạn thẳng - + The point indicated by this label Điểm chỉ định bởi nhãn hiệu này - + The points defining the label polyline Điểm xác định nhãn polyline - + The direction of the straight segment Hướng của đoạn thẳng - + The type of information shown by this label Loại thông tin được hiển thị bởi nhãn này - + The target object of this label Đối tượng mục tiêu của nhãn này - + The text to display when type is set to custom Văn bản hiển thị khi phân loại được đặt thành tùy chỉnh - + The text displayed by this label Văn bản được hiển thị bởi nhãn này - + The size of the text Cỡ chữ của văn bản - + The font of the text Phông chữ của văn bản - + The size of the arrow Kích thước của mũi tên - + The vertical alignment of the text Sắp xếp văn bản theo chiều dọc - + The type of arrow of this label Các loại mũi tên của nhãn này - + The type of frame around the text of this object Các loại viền xung quanh cho văn bản đối tượng này - + Text color Màu chữ - + The maximum number of characters on each line of the text box Số lượng ký tự tối đa trên mỗi dòng trong hộp văn bản - + The distance the dimension line is extended past the extension lines Khoảng cách đường đo kích thước mở rộng thông qua các đường dây tiện ích mở rộng - + Length of the extension line above the dimension line Chiều dài dòng mở rộng trên đường đo kích thước - + The points of the B-spline Điểm B-spline - + If the B-spline is closed or not Nếu B-spline đóng hay mở - + Tessellate Ellipses and B-splines into line segments Lát hình Elip và B-splines thành các dây phân đoạn - + Length of line segments if tessellating Ellipses or B-splines into line segments Chiều của đường dây nếu lát elip hay B-spline thành các đường dây phân đoạn - + If this is True, this object will be recomputed only if it is visible Nếu nó là True, đối tượng này sẽ được xử lý lại nếu nó hữu hình - + Base Cơ bản - + PointList PointList - + Count Tổng số - + The objects included in this clone Các đối tượng trong bản sao này - + The scale factor of this clone Các yếu tố tỷ lệ của bản sao này - + If this clones several objects, this specifies if the result is a fusion or a compound Nếu nhân bản thành nhiều đối tượng, kết quả sẽ được xác định xem là sự hoà nhập tổng hợp hoặc một hợp chất - + This specifies if the shapes sew Xác định nếu hình dạng này là Chuyển từ surface kín sang Solid (SEW) - + Display a leader line or not Display a leader line or not - + The text displayed by this object Văn bản được hiển thị bởi đối tượng này - + Line spacing (relative to font size) Giãn cách dòng (tương ứng với kích cỡ phông chữ) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Độ dốc - + Scale Kích cỡ - + Writing camera position Viết vị trí camera - + Writing objects shown/hidden state Viết các đối tượng được hiển thị / trạng thái ẩn - + X factor Nhân tố X - + Y factor Nhân tố Y - + Z factor Nhân tố Z - + Uniform scaling Kích cỡ quy mô đồng nhất - + Working plane orientation Hướng máy bay @@ -781,20 +816,25 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách đây Công cụ -> Quản lý chương trình bổ trợ - + This Wire is already flat Dây phẳng - + Pick from/to points Chọn từ/ đến điểm - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Độ dốc để cung cấp cho các Dây đã chọn/Dây: 0 = ngang, 1 = 45 độ lên, -1 = 45 độ xuống + + + Create a clone + Tạo một bản sao + DraftShapeStringGui @@ -862,12 +902,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_AddConstruction - + Add to Construction group Thêm vào nhóm xây dựng - + Adds the selected objects to the Construction group Bổ sung các đối tượng vào nhóm xây dựng @@ -875,12 +915,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_AddPoint - + Add Point Thêm điểm - + Adds a point to an existing Wire or B-spline Thệm điểm cho dây có sẵn hoặc B-spline @@ -888,12 +928,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_AddToGroup - + Move to group... Di chuyển đến nhóm... - + Moves the selected object(s) to an existing group Di chuyển (các) đối tượng đã chọn đến một nhóm hiện có @@ -901,12 +941,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_ApplyStyle - + Apply Current Style Áp dụng kiểu hiện tại - + Applies current line width and color to selected objects Áp dụng chiều rộng và màu đường hiện tại cho các đối tượng được chọn @@ -914,12 +954,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_Arc - + Arc Vòng cung - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_Array - + Array Mảng - + Creates a polar or rectangular array from a selected object Tạo một mảng phân cực hoặc hình chữ nhật từ một đối tượng được chọn @@ -961,12 +1001,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_AutoGroup - + AutoGroup Nhóm tự động - + Select a group to automatically add all Draft & Arch objects to Chọn một nhóm để tự động thêm tất cả các đối tượng Nháp và Vòng cung vào @@ -974,12 +1014,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_BSpline - + B-spline Đường B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Tạo ra một đa điểm B-spline. CTRL để chụp, SHIFT để hạn chế @@ -987,12 +1027,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_BezCurve - + BezCurve Đường BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain Tạo ra một đường cong Bezier. CTRL để chụp, SHIFT để hạn chế @@ -1000,7 +1040,7 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_Circle - + Circle Vòng tròn - + Creates a circle. CTRL to snap, ALT to select tangent objects Tạo hình vòng tròn. CTRL để chụp, ALT để chọn đối tượng tiếp tuyến @@ -1021,12 +1061,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_Clone - + Clone Nhân bản - + Clones the selected object(s) Nhân bản các đối tượng đã chọn(s) @@ -1034,12 +1074,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_CloseLine - + Close Line Đóng dòng - + Closes the line being drawn Đóng dòng đang được vẽ @@ -1047,12 +1087,12 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point Xoá điểm - + Removes a point from an existing Wire or B-spline Xoá điểm cho dây có sẵn hoặc B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension Kích thước - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Tạo kích thước. CTRL để chụp, SHIFT để hạn chế, ALT để chọn phân đoạn @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade Hạ cấp - + Explodes the selected objects into simpler objects, or subtracts faces Phá tan các đối tượng đã chọn thành các đối tượng đơn giản hơn, hoặc để giảm bớt các bề mặt @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch Bảnh nháp thành bản vẽ - + Convert bidirectionally between Draft and Sketch objects Chuyển đổi hai chiều giữa các đối tượng bản nháp và bản vẽ @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing Bản vẽ - + Puts the selected objects on a Drawing sheet Đặt các đối tượng đã chọn trên một bản vẽ @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit Chỉnh sửa - + Edits the active object Chỉnh sửa đối tượng đang hoạt động @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse Hình elíp - + Creates an ellipse. CTRL to snap Tạo một hình elip. CTRL để chụp @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Tạo đối tượng facebinder từ (các) bề mặt đã được chọn @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line Dòng kết thúc - + Finishes a line without closing it Kết thúc một dòng mà không đóng nó @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension Kích thước ngược - + Flip the normal direction of a dimension Phương pháp tuyến của kích thước này @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal Chữa trị - + Heal faulty Draft objects saved from an earlier FreeCAD version Chữa lành các bản nháp bị lỗi đã được lưu từ phiên bản FreeCAD trước đó @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Nhãn - + Creates a label, optionally attached to a selected object or element Tạo nhãn, tùy chọn được đính kèm với đối tượng hoặc phần tử đã chọn + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line Đường thẳng - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Tạo một dòng 2 điểm. CTRL để chụp, SHIFT để hạn chế @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror Đối xứng - + Mirrors the selected objects along a line defined by two points Lấy đối xứng các đối tượng được chọn qua một đường thẳng tạo bởi hai điểm @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move Di chuyển - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Offset đối tượng đang hoạt động. Nhấn phím CTRL để bắt điểm, phím SHIFT để ghìm lại và phím ALT để sao chép @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray Mảng đường dẫn - + Creates copies of a selected object along a selected path. Tạo bản sao của đối tượng được chọn dọc theo một đường dẫn đã chọn. @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point Điểm - + Creates a point object Tạo một điểm đối tượng @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon Đa giác - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Tạo một đa giác thông thường. CTRL để chụp, SHIFT để hạn chế @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle Hình chữ nhật - + Creates a 2-point rectangle. CTRL to snap Tạo hình chữ nhật 2 điểm. CTRL để chụp nhanh @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate Xoay - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Xoay các đối tượng đã chọn. CTRL để chụp, SHIFT để hạn chế, ALT để tạo một bản sao @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale Kích cỡ - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Cân chỉnh kích cỡ các đối tượng được chọn từ một điểm cơ bản. CTRL để chụp, SHIFT để hạn chế, ALT để sao chép @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group Chọn nhóm - + Selects all objects with the same parents as this group Chọn tất cả các đối tượng có cùng gốc với nhóm này @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane Chọn mặt phẳng - + Select a working plane for geometry creation Chọn một mặt phẳng làm việc để tạo hình @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Tạo một đối tượng proxy từ mặt phẳng đang làm việc hiện tại - + Create Working Plane Proxy Tạo mặt phẳng Proxy làm việc @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view Chế độ xem hình 2D - + Creates Shape 2D views of selected objects Tạo các chế độ xem 2D của các đối tượng được chọn @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... Hình dạng từ văn bản... - + Creates text string in shapes. Tạo chuỗi văn bản theo hình dạng. @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar Hiển thị thanh chụp - + Shows Draft snap toolbar Hiển thị thanh công cụ chụp nháp @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Thiết lập độ dốc - + Sets the slope of a selected Line or Wire Đặt độ dốc của Đường hoặc Dây đã chọn @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles Góc - + Snaps to 45 and 90 degrees points on arcs and circles Khoá từ điểm 45 và 90 độ trên vòng cung và vòng tròn @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center Trung tâm - + Snaps to center of circles and arcs Khoá trung điểm của vòng tròn và vòng cung @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions Kích thước - + Shows temporary dimensions when snapping to Arch objects Hiển thị kích thước tạm thời khi chụp vào đối tượng Arch @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint Đầu cuối - + Snaps to endpoints of edges Chụp đến điểm cuối của các cạnh @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension Phần mở rộng - + Snaps to extension of edges Chụp đến phần mở rộng của các cạnh @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid Lưới - + Snaps to grid points Chụp các điểm trên lưới @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection Điểm giao nhau - + Snaps to edges intersections Chụp các cạnh của giao điểm @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off Bật / Tắt - + Activates/deactivates all snap tools at once Kích hoạt / hủy kích hoạt tất cả các công cụ chụp cùng một lúc - + Lock Khoá @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint Trung điểm - + Snaps to midpoints of edges Chụp trung điểm của các cạnh @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest Gần nhất - + Snaps to nearest point on edges Chụp đến các điểm gần nhất trên cạnh @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho Thẳng góc - + Snaps to orthogonal and 45 degrees directions Chụp vuông góc và góc hướng 45 độ @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel Song song - + Snaps to parallel directions of edges Chụp theo hướng song song của các cạnh @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular Vuông góc - + Snaps to perpendicular points on edges Bắt điểm vuông góc đến các điểm trên các cạnh @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Bắt điểm đến các vị trí đặc biệt của đối tượng @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane Mặt phẳng làm việc - + Restricts the snapped point to the current working plane Giới hạn điểm được bắt tới mặt phẳng làm việc hiện tại @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Kéo dài các đối tượng đã chọn @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text Văn bản - + Creates an annotation. CTRL to snap Tạo chú thích. Nhấn phím CTRL để bắt điểm nhanh @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. Bật/tắt chế độ xây dựng cho các đối tượng tiếp theo. - + Toggle Construction Mode Bật/tắt chế độ xây dựng @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode Bật/tắt chế độ tiếp tục - + Toggles the Continue Mode for next commands. Bật/tắt chế độ tiếp tụp cho các lệnh tiếp theo. @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode Bật/tắt chế độ hiển thị - + Swaps display mode of selected objects between wireframe and flatlines Giao dịch hoán đổi chế độ hiển thị các đối tượng được lựa chọn giữa khung dây và đường mờ nhạt @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid Bật/tắt Lưới - + Toggles the Draft grid on/off Bật/tắt lưới sơ họa - + Grid Lưới - + Toggles the Draft grid On/Off Bật/tắt lưới sơ họa @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Cắt bớt hoặc mở rộng đối tượng đã chọn hoặc ép đẩy các mặt đơn lẻ. Nhấn phím CTRL để bắt điểm, nhấm phím SHIFT để ràng buộc với đoạn hiện tại hoặc với trực giao, nhấm phím ALT để đảo ngược @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment Hoàn tác đoạn cuối cùng - + Undoes the last drawn segment of the line being drawn Hoàn tác đoạn được vẽ cuối cùng của đường đang được vẽ @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade Nâng cấp - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Ghép các đối tượng đã chọn thành một hoặc chuyển đổi các dây kín thành các bề mặt được lấp kín hoặc ghép các bề mặt - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - Thêm một VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Tạo một Dây sơ họa đa điểm (DWire). Nhấn phím CTRL để bắt điểm, phím SHIFT để khống chế + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Dây đến đường cong B-spline - + Converts between Wire and B-spline Chuyển đổi giữa dây và đường cong B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings Cài đặt Sơ họa chung - + This is the default color for objects being drawn while in construction mode. Đây là màu mặc định cho các đối tượng được vẽ trong khi ở chế độ xây dựng. - + This is the default group name for construction geometry Đây là tên nhóm mặc định cho hình học xây dựng - + Construction Xây dựng @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrainLưu màu và độ rộng đường vẽ hiện tại qua các tác vụ - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode Nếu chọn ô này, chế độ sao chép sẽ được giữ trên lệnh, nếu không lệnh sẽ luôn bắt đầu ở chế độ không sao chép - + Global copy mode Chế độ sao chép toàn bộ - + Default working plane Mặt phẳng làm việc mặc định - + None Không - + XY (Top) XY (Trên) - + XZ (Front) XZ (phía trước) - + YZ (Side) YZ (bên cạnh) @@ -1986,12 +2021,12 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Cài đặt chung - + Construction group name Tên nhóm xây dựng - + Tolerance Dung sai @@ -2016,22 +2051,22 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Ở đây bạn có thể chỉ định một thư mục chứa các tệp SVG bao gồm các định nghĩa <pattern> mà có thể được thêm vào các mẫu tô vật liệu sơ họa chuẩn - + Draft interface mode Chế độ giao diện sơ họa - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction Đây là chế độ giao diện người dùng mà mô-đun Sơ họa sẽ hoạt động: Chế độ Thanh công cụ sẽ đặt tất cả các cài đặt Sơ họa trong thanh công cụ riêng biệt, trong khi đó, chế độ thanh tác vụ sẽ sử dụng hệ thống chế độ xem công việc FreeCAD cho tất cả tương tác của người dùng - + Toolbar Thanh công cụ - + Taskview Chế độ xem công việc @@ -2061,12 +2096,12 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Chế độ Alt - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Thông thường, sau khi sao chép các đối tượng, các bản sao sẽ được chọn. Nếu tùy chọn này được chọn, các đối tượng cơ sở sẽ được chọn thay thế. - + Select base objects after copying Chọn đối tượng cơ sở sau khi sao chép @@ -2101,7 +2136,7 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Các đường chính sẽ được vẽ dày hơn. Chỉ định ở đây có bao nhiêu ô vuông giữa các đường chính. - + Internal precision level Mức độ chính xác nội bộ @@ -2216,12 +2251,12 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Dịch đường màu trắng thành màu đen - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. Khi chọn ô này, các công cụ Sơ họa sẽ tạo một các đối tượng Phần thay vì các đối tượng Sơ họa, khi có hiệu lực. - + Use Part Primitives when available Sử dụng các đối tượng Phần khi có thể @@ -2241,12 +2276,7 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Luôn bắt điểm (hủy chế độ bắt điểm) - - Construction geometry - Hình học xây dựng - - - + Construction geometry color Màu hình học xây dựng @@ -2386,7 +2416,7 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Chọn một tệp phông chữ - + Fill objects with faces whenever possible Điền các đối tượng với các bề mặt bất cứ khi nào có thể @@ -2676,7 +2706,7 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh Cập nhật tự động (chỉ dành cho trình nhập cũ) - + Prefix labels of Clones with: Nhãn tiền tố của các bản sao với: @@ -2715,7 +2745,7 @@ Ví dụ: đối với các tệp tính bằng milimét: 1, tính bằng centim Đây là phương thức được chọn để nhập màu đối tượng SVG vào FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe Nếu chọn ô này, các đối tượng sẽ xuất hiện dưới dạng được điền theo mặc định. Ngược lại, chúng sẽ xuất hiện dưới dạng khung lưới @@ -2795,17 +2825,7 @@ Ví dụ: đối với các tệp tính bằng milimét: 1, tính bằng centim Nếu điều này được chọn, các đối tượng từ cùng một lớp sẽ được tham gia vào Draft Blocks, chuyển màn hình nhanh hơn, nhưng cũng sẽ làm cho chúng dễ dàng chỉnh sửa hơn - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate Khi vẽ các đường, đặt tập trung vào các chiều dài thay vì tọa độ X @@ -2885,12 +2905,12 @@ Ví dụ: đối với các tệp tính bằng milimét: 1, tính bằng centim Đoạn Spline tối đa: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2901,695 +2921,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Xây dựng hình học + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Tương đối + + + + R + R + + + + Continue + Tiếp tục + + + + T + T + + + + Close + Đóng + + + + O + O + + + + Copy + Sao chép + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Điền vào + + + + L + L + + + + Exit + Thoát + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + Chiều dài + + + + H + H + + + + Wipe + Xóa dữ liệu + + + + W + W + + + + Set WP + Thiết lập WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Giới hạn X + + + + X + X + + + + Restrict Y + Giới hạn Y + + + + Y + Y + + + + Restrict Z + Giới hạn Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap Bắt điểm Sơ họa - - - Draft creation tools - Công cụ tạo bản sơ họa - - - - Draft modification tools - Công cụ sửa đổi bản sơ họa - - - - Utilities - Tiện ích - - - - Wire tools - Dụng cụ dây - - - - Snapping - Chế độ bắt điểm - draft - + not shape found hình dạng không tìm thấy - + All Shapes must be co-planar Tất cả các hình dạng phải là đồng phẳng - + The given object is not planar and cannot be converted into a sketch. Đối tượng đã cho không phải là phẳng và không thể chuyển đổi thành bản phác họa. - + Unable to guess the normal direction of this object Không thể đoán hướng bình thường của đối tượng này - + Draft Command Bar Thanh lệnh bản sơ họa - + Toggle construction mode Bật/tắt chế độ xây dựng - + Current line color Màu đường vẽ hiện tại - + Current face color Màu mặt hiện tại - + Current line width Bề rộng đường vẽ hiện tại - + Current font size Kích thước phông chữ hiện tại - + Apply to selected objects Áp dụng cho các đối tượng được chọn - + Autogroup off Tự động tắt nhóm - + active command: lệnh hoạt động: - + None Không - + Active Draft command Lệnh nháp hoạt động - + X coordinate of next point Tọa độ X của điểm tiếp theo - + X X - + Y Y - + Z Z - + Y coordinate of next point Tọa độ Y của điểm tiếp theo - + Z coordinate of next point Tọa độ Z của điểm tiếp theo - + Enter point Nhập điểm - + Enter a new point with the given coordinates Nhập một điểm mới với tọa độ đã cho - + Length Chiều dài - + Angle Góc - + Length of current segment Độ dài của phân đoạn hiện tại - + Angle of current segment Góc của phân đoạn hiện tại - + Radius Bán kính - + Radius of Circle Bán kính của đường tròn - + If checked, command will not finish until you press the command button again Nếu được chọn, lệnh sẽ không kết thúc cho đến khi bạn nhấn nút lệnh một lần nữa - + If checked, an OCC-style offset will be performed instead of the classic offset Nếu được chọn, một offset kiểu OCC sẽ được thực hiện thay vì offset cổ điển - + &OCC-style offset &Offset kiểu OCC - + Add points to the current object Thêm điểm vào đối tượng hiện tại - + Remove points from the current object Xóa điểm khỏi đối tượng hiện tại - + Make Bezier node sharp Làm cho nút Bezier nhọn - + Make Bezier node tangent Tạo nút Bezier tiếp tuyến - + Make Bezier node symmetric Làm cho nút Bezier đối xứng - + Sides Các bên - + Number of sides Số mặt bên - + Offset Offset - + XY (top) XY (Trên) - - Select XY plane - Chọn mặt phẳng XY - - - + XZ (front) XZ (phía trước) - - Select XZ plane - Chọn mặt phẳng XZ - - - + YZ (side) YZ (bên cạnh) - - Select YZ plane - Chọn mặt phẳng YZ - - - + View Chế độ xem - - Select plane perpendicular to the current view - Chọn mặt phẳng vuông góc với giao diện hiện thời - - - + Auto Tự động - - Do not project points to a drawing plane - Không chiếu các điểm vào mặt phẳng vẽ - - - + Text string to draw Chuỗi văn bản để vẽ - + String Chuỗi - + Height of text Chiều cao phông chữ - + Height Chiều cao - + Intercharacter spacing Khoảng cách giữa các ký tự - + Tracking Theo dõi - + Full path to font file: Đường dẫn đầy đủ đến tệp phông chữ: - + Open a FileChooser for font file Mở một tệp phông chữ - + Grid spacing Khoảng cách lưới - + The spacing between the grid lines Khoảng cách giữa các đường lưới - + Main line every Đường chính của mỗi - + The number of lines between main lines Số đường giữa các đường chính - + Center plane on view Mặt phẳng trung tâm trên chế độ xem - - Select Plane - Chọn mặt phẳng - - - + Line Đường thẳng - + DWire DWire - + Circle Vòng tròn - + Center X Tâm X - + Arc Vòng cung - + Point Điểm - + Label Nhãn - + Distance Distance - + Trim Cắt bỏ - + Pick Object Chọn đối tượng - + Edit Chỉnh sửa - + Global X Tổng thể X - + Global Y Tổng thể Y - + Global Z Tổng thể Z - + Local X Cục bộ X - + Local Y Cục bộ Y - + Local Z Cục bộ Z - + Invalid Size value. Using 200.0. Giá trị Kích thước không hợp lệ. Sử dụng 200.0. - + Invalid Tracking value. Using 0. Giá trị theo dõi không hợp lệ. Sử dụng 0. - + Please enter a text string. Vui lòng nhập một chuỗi văn bản. - + Select a Font file Chọn một tệp Phông chữ - + Please enter a font file. Vui lòng nhập một tệp phông chữ. - + Autogroup: Nhóm tự động: - + Faces Bề mặt - + Remove Xóa bỏ - + Add Thêm mới - + Facebinder elements Các thành phần của Facebinder - + Create Line Tạo Đường vẽ - - Pick next point: - - Chọn điểm tiếp theo: - - - - + Convert to Wire Chuyển đổi thành Dây - + BSpline Đường cong BSpline - + BezCurve Đường BezCurve - + Create BezCurve Tạo BezCurve - + Rectangle Hình chữ nhật - + Create Plane Tạo mặt phẳng - + Create Rectangle Tạo hình chữ nhật - + Create Circle Tạo đường tròn - + Create Arc Tạo Cung - + Start Angle Góc ban đầu - + Aperture Khẩu độ - + Polygon Đa giác - + Create Polygon Tạo đa giác - + Ellipse Hình elíp - + Create Ellipse Tạo hình elip - + Text Văn bản - + Create Text Tạo văn bản - + Dimension Kích thước - + Create Dimension Tạo kích thước - + ShapeString Chuỗi tạo hình - + Create ShapeString Tạo Chuỗi tạo hình - + Copy Sao chép - + Move Di chuyển - + Change Style Thay đổi Kiểu - + Rotate Xoay - - Cannot offset this object type - - Không thể offset loại đối tượng này - - - - + Stretch Stretch - + Upgrade Nâng cấp - + Downgrade Hạ cấp - + Selection is not a Knot Điểm đã chọn không phải là một nút - + Convert to Sketch Chuyển sang Bản phác họa - + Convert to Draft Chuyển đổi sang Bản nháp - + Convert Chuyển đổi - + Array Mảng - + Create Point Tạo điểm - + Mirror Đối xứng - + &Draft &Bản nháp @@ -3613,179 +3779,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Để cho phép FreeCAD tải xuống các thư viện này, hãy trả lời Có. - + Draft.makeBSpline: not enough points Draft.makeBSpline: không đủ điểm - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Hai điểm cuối cùng bắt buộc phải kín - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Danh sách điểm không hợp lệ - + No object given Không có đối tượng nào được đưa ra - + The two points are coincident Hay điểm này trùng nhau - + Found groups: closing each open object inside Các nhóm được tìm thấy: đóng mỗi cái và mở đối tượng bên trong - + Found mesh(es): turning into Part shapes (Các) lưới được tìm thấy: chuyển thành các hình Phần - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Đã tìm thấy 2 đối tượng: đã hợp nhất - + Found several objects: creating a shell Đã tìm thấy các đối tượng khác nhau: tạo một vỏ - + Found several coplanar objects or faces: creating one face Tìm thấy một số đối tượng đồng phẳng hoặc khuôn mặt: tạo một khuôn mặt - + Found 1 non-parametric objects: draftifying it Đã tìm thấy 1 đối tượng không có tham số: chỉnh lại nó - + Found 1 closed sketch object: creating a face from it Tìm thấy 1 đối tượng phác họa kín: tạo một mặt từ nó - + Found 1 linear object: converting to line Đã tìm thấy 1 đối tượng tuyến tính: chuyển đổi thành đường - + Found closed wires: creating faces Tìm thấy các dây kín: tạo các mặt - + Found 1 open wire: closing it Tìm thấy 1 dây hở: làm kín nó - + Found several open wires: joining them Tìm thấy một số dây hở: hợp nhất các dây đó - + Found several edges: wiring them Tìm thấy một số cạnh: nối chúng lại - + Found several non-treatable objects: creating compound Tìm thấy một số đối tượng không thể sửa: tạo ra thể hỗn hợp - + Unable to upgrade these objects. Không thể nâng cấp các đối tượng này. - + Found 1 block: exploding it Đã tìm thấy 1 khối: làm nổ nó - + Found 1 multi-solids compound: exploding it Tìm thấy 1 hợp chất đa chất rắn: làm nổ nó - + Found 1 parametric object: breaking its dependencies Tìm thấy 1 đối tượng tham số: phá vỡ các phụ thuộc của nó - + Found 2 objects: subtracting them Đã tìm thấy 2 đối tượng: khử chúng - + Found several faces: splitting them Tìm thấy một số mặt: tách chúng ra - + Found several objects: subtracting them from the first one Đã tìm thấy một số đối tượng: khử chúng ra khỏi đối tượng đầu tiên - + Found 1 face: extracting its wires Tìm thấy 1 mặt: Cởi dây của nó ra - + Found only wires: extracting their edges Chỉ tìm thấy dây: Gỡ rời các cạnh của chúng ra - + No more downgrade possible Không hạ cấp được nữa - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Đóng cùng với điểm đầu tiên / cuối cùng. Hình học không được cập nhật. - + No point found No point found - + ShapeString: string has no wires ShapeString: chuỗi không có dây - + Relative Tương đối - + Continue Tiếp tục - + Close Đóng @@ -3830,7 +3996,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Giới hạn Z - + Select edge Chọn cạnh @@ -3845,7 +4011,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Chế độ dài - + Wipe Xóa dữ liệu @@ -3860,454 +4026,279 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cycle snap object - + Check this to lock the current angle Kiểm tra điều này để khóa góc hiện tại - + Coordinates relative to last point or absolute Tọa độ tương đối hoặc tuyệt đối so với điểm cuối cùng - + Filled Đã lấp đầy - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Kiểm tra điều này nếu đối tượng sẽ xuất hiện như được lấp đầy, nếu không nó sẽ xuất hiện như khung dây - - - + Finish Hoàn tất - + Finishes the current drawing or editing operation Hoàn thành bản vẽ hoặc chỉnh sửa thao tác - + &Undo (CTRL+Z) &Hoàn tác (CTRL + Z) - + Undo the last segment Hoàn tác đoạn cuối cùng - + Finishes and closes the current line Kết thúc và làm kín đường vẽ hiện tại - + Wipes the existing segments of this line and starts again from the last point Xóa các phân đoạn hiện tại của đường vẽ này và bắt đầu lại từ điểm cuối cùng - + Set WP Thiết lập WP - + Reorients the working plane on the last segment Định hướng lại mặt phẳng làm việc trên đoạn cuối cùng - + Selects an existing edge to be measured by this dimension Chọn cạnh hiện tại được đo theo kích thước này - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - tùy chọn - - - + Default Mặc định - + Pick a face to define the drawing plane Chọn một mặt để xác định mặt phẳng vẽ - - First point: - Điểm đầu tiên: - - - - Closing - Đang đóng - - - + Create Wire Create Wire - - Removing last point - Đang gỡ điểm cuối cùng - - - - Next point: - Điểm tiếp theo: - - - - Restarting from - Đang khởi động lại - - - + Unable to create a Wire from selected objects Không thể tạo một Dây từ các đối tượng đã chọn - + Spline has been closed Spline đã bị đóng - + Last point has been removed Điểm cuối cùng đã bị xóa - - Pick next point, or Finish (shift-F) or close (o): - Chọn điểm tiếp theo, hoặc Kết thúc (shift-F) hoặc đóng (o): - - - + Create B-spline Tạo đường cong B-spline - + Bezier curve has been closed Đường cong Bezier đã bị đóng - - Pick first point: - Chọn điểm đầu: - - - - Pick opposite point: - Chọn điểm đối diện: - - - - Pick center point: - Chọn trung điểm: - - - - Pick radius: - Chọn bán kính: - - - - Pick start angle: - Chọn góc ban đầu: - - - - Pick aperture: - Chọn khẩu độ: - - - - Aperture angle: - Khẩu độ góc: - - - - Pick location point: - Chọn điểm vị trí: - - - + Edges don't intersect! Các cạnh không cắt nhau! - + Pick ShapeString location point: Chọn điểm định vị chuỗi tạo hình: - + Select an object to move Chọn một đối tượng để di chuyển - - Pick start point: - Chọn điểm đầu: - - - - Pick end point: - Chọn điểm cuối: - - - + Select an object to rotate Chọn một đối tượng để xoay - - Pick rotation center: - Chọn tâm xoay: - - - - Pick base angle: - Chọn góc cơ sở: - - - - Pick rotation angle: - Chọn góc xoay: - - - + Select an object to offset Chọn một đối tượng để offset - + Offset only works on one object at a time Offset chỉ hoạt động trên một đối tượng tại một thời điểm - + Sorry, offset of Bezier curves is currently still not supported Xin lỗi, offset đường cong Bezier hiện vẫn chưa được hỗ trợ - - Pick distance: - Chọn khoảng cách: - - - + Select an object to stretch Chọn một đối tượng để kéo dài - - Pick first point of selection rectangle: - Chọn điểm đầu tiên của hình chữ nhật đã chọn: - - - - Pick opposite point of selection rectangle: - Chọn điểm đối diện của hình chữ nhật đã chọn: - - - - Pick start point of displacement: - Chọn điểm bắt đầu để di chuyển: - - - - Pick end point of displacement: - Chọn điểm cuối để di chuyển: - - - + Turning one Rectangle into a Wire Chuyển một hình chữ nhật thành một dây - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Chọn một đối tượng để nâng cấp - + Select object(s) to trim/extend Chọn (các) đối tượng để cắt / mở rộng - + Unable to trim these objects, only Draft wires and arcs are supported Không thể cắt các đối tượng này, chỉ hỗ trợ các dây và cung nháp - + Unable to trim these objects, too many wires Không thể cắt các đối tượng này, quá nhiều dây - + These objects don't intersect Các đối tượng này không giao nhau - + Too many intersection points Quá nhiều điểm giao nhau - + Select an object to scale Chọn một đối tượng để chia tỷ lệ - - Pick base point: - Chọn điểm cơ sở: - - - - Pick reference distance from base point: - Chọn khoảng cách tham chiếu từ điểm cơ sở: - - - - Pick new distance from base point: - Chọn khoảng cách mới từ điểm cơ sở: - - - + Select an object to project Chọn một đối tượng cho dự án - - This object type is not editable - Loại đối tượng này không thể chỉnh sửa được - - - + Please select only one object Vui lòng chỉ chọn một đối tượng - + Select a Draft object to edit Chọn một đối tượng Nháp để chỉnh sửa - + Active object must have more than two points/nodes Đối tượng hoạt động phải có nhiều hơn hai điểm / nút - + Endpoint of BezCurve can't be smoothed Điểm cuối của BezCurve không thể được làm mượt - + Select an object to convert Chọn một đối tượng để chuyển đổi - + Select an object to array Chọn một đối tượng cho mảng - + Please select base and path objects Vui lòng chọn các đối tượng cơ sở và đường dẫn - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Chọn một đối tượng để sao chép - + Select face(s) on existing object(s) Chọn (các) mặt trên (các) đối tượng hiện có - + Select an object to mirror Chọn một đối tượng để lấy đối xứng - - Pick start point of mirror line: - Chọn điểm bắt đầu của đường đối xứng: - - - - Pick end point of mirror line: - Chọn điểm cuối của đường đối xứng: - - - + This tool only works with Wires and Lines Công cụ này chỉ hoạt động với Dây và Đường - - - Pick target point: - Chọn điểm mục tiêu: - - - - Pick endpoint of leader line: - Chọn điểm cuối của đường chính: - - - - Pick text position: - Chọn vị trí văn bản: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4317,56 +4308,354 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale Kích cỡ - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + Đỉnh + + + + Front + Phía trước + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Tự động + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Xoay + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + Mớn nước của tàu + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + Tiện ích + + + + Wire tools + Dụng cụ dây + + + + Snapping + Chế độ bắt điểm + diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index 12b7bcf9d7..b36e1b586a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 7e0a1ca6b3..fe1276d119 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern 定义剖面线样式 - + Sets the size of the pattern 设置图样的大小 - + Startpoint of dimension 尺寸的起始点 - + Endpoint of dimension 尺寸的终点 - + Point through which the dimension line passes 尺寸线所经过的点 - + The object measured by this dimension 尺寸测定的对象 - + The geometry this dimension is linked to 此尺寸链接到的几何体 - + The measurement of this dimension 这个尺寸的大小 - + For arc/circle measurements, false = radius, true = diameter 用于圆弧/圆测量，假 = 半径，true = 直径 - + Font size 字体大小 - + The number of decimals to show 显示小数位数 - + Arrow size 箭头大小 - + The spacing between the text and the dimension line 文本和尺寸线之间的间距 - + Arrow type 箭头类型 - + Font name 字体名称 - + Line width 线宽 - + Line color 线条颜色 - + Length of the extension lines 延长线的长度 - + Rotate the dimension arrows 180 degrees 尺寸箭头旋转 180 度 - + Rotate the dimension text 180 degrees 将尺寸文本旋转 180 度 - + Show the unit suffix 显示单元后缀 - + The position of the text. Leave (0,0,0) for automatic position 文本的位置。保持 (00, 0) 自动位置 - + Text override. Use $dim to insert the dimension length 文本覆写。使用 $dim 插入尺寸长度 - + A unit to express the measurement. Leave blank for system default 表示测量的单位。保留系统默认值为空 - + Start angle of the dimension 尺寸的起始角度 - + End angle of the dimension 尺寸的终止角度 - + The center point of this dimension 此尺寸的中心点 - + The normal direction of this dimension 此尺寸的法线方向 - + Text override. Use 'dim' to insert the dimension length 文本覆写。使用 dim 插入尺寸长度 - + Length of the rectangle 矩形的长度 - + Radius to use to fillet the corners 倒圆角的半径 - + Size of the chamfer to give to the corners 倒角尺寸 - + Create a face 创建一个面 - + Defines a texture image (overrides hatch patterns) 定义纹理图像 (覆盖剖面线样式) - + Start angle of the arc 圆弧的起始角度 - + End angle of the arc (for a full circle, give it same value as First Angle) 圆孤的终止角度(对于完整的圆，终止角与起始角设为相同值) - + Radius of the circle 圆的半径 - + The minor radius of the ellipse 椭圆的短半径 - + The major radius of the ellipse 椭圆的长半径 - + The vertices of the wire 线的顶点 - + If the wire is closed or not 线是封闭或开放的 - + The start point of this line 这条线的起点 - + The end point of this line 这条线的终点 - + The length of this line 此线的长度 - + Create a face if this object is closed 如果此对象封闭, 则创建一个面 - + The number of subdivisions of each edge 每个边的细分数 - + Number of faces 面数 - + Radius of the control circle 控制圆的半径 - + How the polygon must be drawn from the control circle 如何从控制圆绘制多边形 - + Projection direction 投影方向 - + The width of the lines inside this object 此对象内线条的宽度 - + The size of the texts inside this object 此对象内文本的大小 - + The spacing between lines of text 文本行之间的间距 - + The color of the projected objects 投影对象的颜色 - + The linked object 链接的对象 - + Shape Fill Style 形状填充样式 - + Line Style 线条样式 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果选中, 则无论在3D 模型中是否可见, 都将显示源对象 - + Create a face if this spline is closed 如果此样条封闭, 则创建一个面 - + Parameterization factor 参数化因子 - + The points of the Bezier curve 贝塞尔曲线的点 - + The degree of the Bezier function 贝塞尔函数的程度 - + Continuity 连续性 - + If the Bezier curve should be closed or not 贝塞尔曲线是封闭的还是开放的 - + Create a face if this curve is closed 如果曲线闭合, 则创建一个面 - + The components of this block 此区块的组件 - + The base object this 2D view must represent 此2D视图必须表示的基对象 - + The projection vector of this object 此对象的投影向量 - + The way the viewed object must be projected 所查看对象的投影方式 - + The indices of the faces to be projected in Individual Faces mode 单独面模式下的面索引 - + Show hidden lines 显示隐藏线 - + The base object that must be duplicated 必须重复的基对象 - + The type of array to create 要创建的数组的类型 - + The axis direction 轴方向 - + Number of copies in X direction X 方向的副本数 - + Number of copies in Y direction Y方向的副本数 - + Number of copies in Z direction Z方向的副本数 - + Number of copies 复制份数 - + Distance and orientation of intervals in X direction X 方向上间隔的距离和方向 - + Distance and orientation of intervals in Y direction Y 方向上间隔的距离和方向 - + Distance and orientation of intervals in Z direction Z 方向上间隔的距离和方向 - + Distance and orientation of intervals in Axis direction 轴方向的距离和方向 - + Center point 中心点 - + Angle to cover with copies 用副本覆盖的角度 - + Specifies if copies must be fused (slower) 指定是否必须将副本融合 (较慢) - + The path object along which to distribute objects 沿其分布对象的路径对象 - + Selected subobjects (edges) of PathObj 选定路径对象的子对象 (边) - + Optional translation vector 可选的翻译向量 - + Orientation of Base along path 沿程方向 - + X Location X位置 - + Y Location Y 位置 - + Z Location Z位置 - + Text string 文本字符串 - + Font file name 字体文件名称 - + Height of text 字高 - + Inter-character spacing 文字间隔 - + Linked faces 关联的面 - + Specifies if splitter lines must be removed 指定是否必须删除分割线 - + An optional extrusion value to be applied to all faces 一个应用于所有面的可选延伸值 - + Height of the rectangle 矩形的高度 - + Horizontal subdivisions of this rectangle 此矩形的水平细分 - + Vertical subdivisions of this rectangle 此矩形的垂直细分 - + The placement of this object 此对象的位置 - + The display length of this section plane 此剖面的显示长度 - + The size of the arrows of this section plane 此剖面箭头的大小 - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location 对于切割线和切割面模式, 这在切口位置留下面 - + The base object is the wire, it's formed from 2 objects 基对象是连线, 它是由2个对象形成的 - + The tool object is the wire, it's formed from 2 objects 工具对象是连线, 它由2个对象形成的 - + The length of the straight segment 直线段的长度 - + The point indicated by this label 此标签指示的点 - + The points defining the label polyline 定义标签折线的点 - + The direction of the straight segment 直线段的方向 - + The type of information shown by this label 此标签显示的信息类型 - + The target object of this label 此标签的目标对象 - + The text to display when type is set to custom 当类型设置为自定义时显示的文本 - + The text displayed by this label 此标签显示的文本 - + The size of the text 文本的大小 - + The font of the text 文本的字体 - + The size of the arrow 箭头的大小 - + The vertical alignment of the text 文本的垂直对齐方式 - + The type of arrow of this label 此标签的箭头类型 - + The type of frame around the text of this object 此对象的文本周围的框架类型 - + Text color 文本颜色 - + The maximum number of characters on each line of the text box 文本框每一行上的最大字符数 - + The distance the dimension line is extended past the extension lines 尺寸线延伸到延长线之后的距离 - + Length of the extension line above the dimension line 尺寸线上方延长线的长度 - + The points of the B-spline B样条的点 - + If the B-spline is closed or not B样条曲线是封闭还是开放的 - + Tessellate Ellipses and B-splines into line segments 镶嵌椭圆和B样条曲线为直线段 - + Length of line segments if tessellating Ellipses or B-splines into line segments 镶嵌椭圆或B样条曲线的合成线段，则为线段的长度 - + If this is True, this object will be recomputed only if it is visible 如果真, 此对象仅在可见时才被重新计算。 - + Base 基本 - + PointList 点列表 - + Count 计数 - + The objects included in this clone 在复制中包含的对象 - + The scale factor of this clone 此复制的比例因子 - + If this clones several objects, this specifies if the result is a fusion or a compound 如果复制了多个对象, 则指定结果是合并还是组合 - + This specifies if the shapes sew 这指定形状是否缝合 - + Display a leader line or not 显示或不显示引线 - + The text displayed by this object 此对象显示的文本 - + Line spacing (relative to font size) 行距 (相对于字体大小) - + The area of this object - The area of this object + 此对象的面积 - + Displays a Dimension symbol at the end of the wire - Displays a Dimension symbol at the end of the wire + 在线的末端显示尺寸符号 - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope 倾斜 - + Scale 缩放 - + Writing camera position 写入相机位置 - + Writing objects shown/hidden state 写入显示的对象/隐藏状态 - + X factor X系数 - + Y factor Y系数 - + Z factor Z系数 - + Uniform scaling 均匀缩放 - + Working plane orientation 工作平面方向 @@ -779,20 +814,25 @@ from menu Tools -> Addon Manager Dxf 库下载失败。请从菜单的工具-> 插件管理器中手动安装 dxf 库插件 - + This Wire is already flat 该线已经平了 - + Pick from/to points 多点间拾取 - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down 选取连线或直线的斜率: 0 = 水平, 1 =上升45度, -1 = 下降45度 + + + Create a clone + 创建副本 + DraftShapeStringGui @@ -860,12 +900,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group 添加到铺助组 - + Adds the selected objects to the Construction group 将所选对象添加到辅助组 @@ -873,12 +913,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point 添加点 - + Adds a point to an existing Wire or B-spline 向现有线或B样条曲线上添加点 @@ -886,12 +926,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... 移动到组... - + Moves the selected object(s) to an existing group 将所选的对象移到现有组 @@ -899,12 +939,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style 应用当前样式 - + Applies current line width and color to selected objects 将当前线宽及颜色应用到选中对象 @@ -912,12 +952,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc 圆弧 - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -925,7 +965,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -933,12 +973,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -946,12 +986,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array 阵列 - + Creates a polar or rectangular array from a selected object 从所选对象创建极坐标或矩形阵列 @@ -959,12 +999,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup 自动群组 - + Select a group to automatically add all Draft & Arch objects to 自动加入所有底图跟建筑物件到选择的群组 @@ -972,12 +1012,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline 贝塞尔曲线 - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain 创建一个多点贝塞尔曲线。按CTRL键以捕捉，按SHIFT键以约束 @@ -985,12 +1025,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve 贝兹曲线 - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain 创建贝塞尔曲线。按CTRL键以捕捉, 按SHIFT键以建立约束 @@ -998,7 +1038,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1006,12 +1046,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle 圆 - + Creates a circle. CTRL to snap, ALT to select tangent objects 创建圆.Ctrl捕捉,Alt选择相切对象 @@ -1019,12 +1059,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone 克隆 - + Clones the selected object(s) 克隆所选对象 @@ -1032,12 +1072,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line 闭合线段 - + Closes the line being drawn 闭合当前绘制线段 @@ -1045,12 +1085,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1060,12 +1100,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point 删除点 - + Removes a point from an existing Wire or B-spline 从现有的线或贝塞尔曲线中删除点 @@ -1073,12 +1113,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension 尺寸标注 - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 创建尺寸标注.Ctrl捕捉,Shift约束,Alt选择线段 @@ -1086,12 +1126,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade 降级 - + Explodes the selected objects into simpler objects, or subtracts faces 将所选物件分解为更简单的物件或移除面 @@ -1099,12 +1139,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch 底图转草图 - + Convert bidirectionally between Draft and Sketch objects 底图和草图间双向转换 @@ -1112,12 +1152,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing 图纸 - + Puts the selected objects on a Drawing sheet 将选中的对象放在图纸上 @@ -1125,12 +1165,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit 编辑 - + Edits the active object 编辑当前对象 @@ -1138,30 +1178,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse 椭圆 - + Creates an ellipse. CTRL to snap 建立一个椭圆，按CTRL可捕捉 @@ -1169,12 +1204,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder 面连接器 - + Creates a facebinder object from selected face(s) 从所选面创建 facebinder 对象 @@ -1182,12 +1217,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line 完成线段 - + Finishes a line without closing it 完成线段但不闭合 @@ -1195,12 +1230,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension 翻转尺寸 - + Flip the normal direction of a dimension 翻转尺寸的法线方向 @@ -1208,12 +1243,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal 修复 - + Heal faulty Draft objects saved from an earlier FreeCAD version 修复以较早FreeCAD版本保存的底图物件 @@ -1221,12 +1256,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join 拼接 - + Joins two wires together 拼接两条线 @@ -1234,25 +1269,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label 标签 - + Creates a label, optionally attached to a selected object or element 创建一个标签, 可以选择附加到选定的对象或元素 + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line 线 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 两点创建线段.Ctrl捕捉,Shift约束 @@ -1260,12 +1308,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror 镜像 - + Mirrors the selected objects along a line defined by two points 沿由两点定义的直线映射所选对象 @@ -1273,12 +1321,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move 移动 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1286,12 +1334,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset 偏移 - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy 偏移当前对象.Ctrl捕捉,Shift约束,Alt复制 @@ -1299,12 +1347,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray 路径阵列 - + Creates copies of a selected object along a selected path. 沿所选路位建立所选物件的副本 @@ -1312,12 +1360,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point 点 - + Creates a point object 创建点对象 @@ -1325,12 +1373,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray 点阵列 - + Creates copies of a selected object on the position of points. 在点的位置创建选定对象的副本。 @@ -1338,12 +1386,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon 多边形 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 创建正多边形.CTRL捕捉,Shift约束 @@ -1351,12 +1399,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle 矩形 - + Creates a 2-point rectangle. CTRL to snap 两点创建矩形.Ctrl捕捉 @@ -1364,12 +1412,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate 旋转 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 旋转选中对象.CTRL捕捉,Shift约束,Alt复制 @@ -1377,12 +1425,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale 缩放 - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 自基点缩放选定对象.Ctrl捕捉,Shift约束,Alt复制 @@ -1390,12 +1438,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group 选择组 - + Selects all objects with the same parents as this group 选择同一父级下的所有对象 @@ -1403,12 +1451,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane 选择平面 - + Select a working plane for geometry creation 选择工作平面以创建几何对象 @@ -1416,12 +1464,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane 从当前工作平面创建代理对象 - + Create Working Plane Proxy 创建工作平面代理 @@ -1429,12 +1477,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 2D 形体视图 - + Creates Shape 2D views of selected objects 创建所选对象的2D形体视图 @@ -1442,12 +1490,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... 由文字建立图形... - + Creates text string in shapes. 在形状中创建文本字符串。 @@ -1455,12 +1503,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar 显示捕捉栏 - + Shows Draft snap toolbar 显示底图捕捉工具栏 @@ -1468,12 +1516,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope 斜率设置 - + Sets the slope of a selected Line or Wire 设置所选线或线的斜率 @@ -1481,12 +1529,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles 角度 - + Snaps to 45 and 90 degrees points on arcs and circles 锁定圆及弧的四分点 @@ -1494,12 +1542,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center 中心 - + Snaps to center of circles and arcs 捕捉圆或弧的中心 @@ -1507,12 +1555,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions 尺寸 - + Shows temporary dimensions when snapping to Arch objects 捕捉弧对象时显示当前的尺寸 @@ -1520,12 +1568,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint 终点 - + Snaps to endpoints of edges 捕捉边的端点 @@ -1533,12 +1581,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension 延伸 - + Snaps to extension of edges 与边缘的扩展对齐 @@ -1546,12 +1594,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid 网格 - + Snaps to grid points 对齐到网格点 @@ -1559,12 +1607,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection 交集 - + Snaps to edges intersections 捕捉边线交点 @@ -1572,17 +1620,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off 切换开/关 - + Activates/deactivates all snap tools at once 一次启动/取消所有捕捉工具 - + Lock 锁 @@ -1590,12 +1638,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint 中点 - + Snaps to midpoints of edges 捕捉边线中点 @@ -1603,12 +1651,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest 最近处 - + Snaps to nearest point on edges 捕捉边线上的最近点 @@ -1616,12 +1664,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho 垂直 - + Snaps to orthogonal and 45 degrees directions 捕捉正交和 45 度方向 @@ -1629,12 +1677,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel 平行 - + Snaps to parallel directions of edges 与边的平行方向对齐 @@ -1642,12 +1690,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular 垂直 - + Snaps to perpendicular points on edges 对齐边缘上的垂直点 @@ -1655,12 +1703,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special 特定 - + Snaps to special locations of objects 对对象的特殊位置进行快照 @@ -1668,12 +1716,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane 工作平面 - + Restricts the snapped point to the current working plane 将已捕捉的点限制为当前工作平面 @@ -1681,12 +1729,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split 分割 - + Splits a wire into two wires 将线分成两段 @@ -1694,12 +1742,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch 拉伸 - + Stretches the selected objects 缩放所选的对象 @@ -1707,12 +1755,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text 文本 - + Creates an annotation. CTRL to snap 创建注释.Ctrl捕捉 @@ -1720,12 +1768,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. 切换后续对象为辅助线模式. - + Toggle Construction Mode 切换辅助线模式 @@ -1733,12 +1781,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode 切换连续模式 - + Toggles the Continue Mode for next commands. 后续命令切换为连续模式. @@ -1746,12 +1794,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode 切换显示模式 - + Swaps display mode of selected objects between wireframe and flatlines 切换选中对象的显示模式为"线框"或"带边框着色" @@ -1759,22 +1807,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid 切换网格 - + Toggles the Draft grid on/off 开/关底图格线 - + Grid 网格 - + Toggles the Draft grid On/Off 切换草稿网格开/关 @@ -1782,12 +1830,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex 修剪/延伸 - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 修剪或延伸所选对象,或拉伸单一面. CTRL捕捉,shift约束到当前段或正交,ALT反转 @@ -1795,12 +1843,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment 撤销上一段 - + Undoes the last drawn segment of the line being drawn 撤销当前绘制线段的上一段 @@ -1808,51 +1856,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade 升级 - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces 将所选对象加入其中, 或将闭合的连线转换为填充的面, 或联合的面 - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - 增加 VisGroup - - Draft_Wire - - DWire - 草图线 + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - 创建多点底图线. CTRL键捕捉, SHIFT键约束 + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline 连线到B样条曲线 - + Converts between Wire and B-spline 在线和B样条曲线之间转换 @@ -1860,22 +1895,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings 底图全局设置 - + This is the default color for objects being drawn while in construction mode. 这是构造模式下绘制对象的默认颜色. - + This is the default group name for construction geometry 这是构造几何元素的默认组名 - + Construction 构造 @@ -1885,37 +1920,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain保存当前颜色及线宽到所有会话 - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode 选中则命令间启用复制模式,否则为非复制模式 - + Global copy mode 全局复制模式 - + Default working plane 默认工作平面 - + None 无 - + XY (Top) XY(顶面) - + XZ (Front) XZ(前面) - + YZ (Side) YZ(侧面) @@ -1983,12 +2018,12 @@ such as "Arial:Bold" 常规设置 - + Construction group name 构造组名 - + Tolerance 公差 @@ -2013,22 +2048,22 @@ such as "Arial:Bold" 此处你可以指定一个包含SVG样式定义的文件目录, 该SVG样式定义可添加至标准底图剖面线样式 - + Draft interface mode 底图界面模式 - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction 底图模块工作的界面模式: 工具栏模式将所有的底图设置放置在单独的工具条内, 任务栏模式使用FreeCAD的任务浏览器系统与用户进行所有交互 - + Toolbar 工具栏 - + Taskview 任务视图 @@ -2058,12 +2093,12 @@ such as "Arial:Bold" Alt 模式 - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. 通常,复制对象后,副本被选种.如果选中此选项，则原对象被选种. - + Select base objects after copying 复制后选中原对象 @@ -2098,7 +2133,7 @@ such as "Arial:Bold" 主网格线加厚绘制. 在此处指定主网格线间的分格数. - + Internal precision level 内部精度等级 @@ -2213,12 +2248,12 @@ such as "Arial:Bold" 转换白线为黑色 - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. 勾选时，底图工具若许可会以建立零件图元来取代底图物件。 - + Use Part Primitives when available 当许可时使用零件图元 @@ -2238,12 +2273,7 @@ such as "Arial:Bold" 持续锁点(取消锁点模式) - - Construction geometry - 辅助几何体 - - - + Construction geometry color 辅助用几何颜色 @@ -2383,7 +2413,7 @@ such as "Arial:Bold" 选择一个字体文件 - + Fill objects with faces whenever possible 当可行时将物件以面填满 @@ -2673,7 +2703,7 @@ such as "Arial:Bold" 自动更新(仅适用于旧的导入器) - + Prefix labels of Clones with: 副本的前缀标签: @@ -2712,7 +2742,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 这是为将 SVG 对象颜色导入 FreeCAD 所选择的方法。 - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe 如果选中此项, 则默认情况下, 对象将显示为已填充。否则, 它们将显示为线框 @@ -2792,17 +2822,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 如果选中此项, 则同一图层中的对象将加入到草稿块中, 从而更快地打开显示, 但使其不易编辑 - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - 如果选中此选项, 则在运行 "草稿" 命令时, 单步执行说明将显示在 "输出" 窗口中 - - - - Verbose command line mode - 详细命令行模式 - - - + When drawing lines, set focus on Length instead of X coordinate 绘制线条时, 将焦点设置为长度而不是 X 坐标 @@ -2882,12 +2902,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 最大样条线段: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2898,693 +2918,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + 辅助几何体 + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + 相对 + + + + R + R + + + + Continue + 继续 + + + + T + T + + + + Close + 关闭 + + + + O + O + + + + Copy + 复制 + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + 填充 + + + + L + L + + + + Exit + 退出 + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + 长度 + + + + H + H + + + + Wipe + 清除 + + + + W + W + + + + Set WP + 设置WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + 限制 x轴 + + + + X + X + + + + Restrict Y + 限制 Y轴 + + + + Y + Y + + + + Restrict Z + 限制z轴 + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap 底图捕捉 - - - Draft creation tools - 底图创建工具 - - - - Draft modification tools - 底图修改工具 - - - - Utilities - 实用程序 - - - - Wire tools - 线框工具 - - - - Snapping - 对齐功能 - draft - + not shape found 未找到形状 - + All Shapes must be co-planar 所有形状都必须共面 - + The given object is not planar and cannot be converted into a sketch. 给定的对象不是平面的, 不能转换为草图。 - + Unable to guess the normal direction of this object 无法推测该对象的正常方向 - + Draft Command Bar 底图命令栏 - + Toggle construction mode 切换辅助线模式 - + Current line color 当前线条颜色 - + Current face color 当前面颜色 - + Current line width 当前线宽 - + Current font size 当前字号 - + Apply to selected objects 应用于选中对象 - + Autogroup off Autogroup 关闭 - + active command: 当前命令: - + None 无 - + Active Draft command 当前绘图命令 - + X coordinate of next point 下一个点的X坐标 - + X X - + Y Y - + Z Z - + Y coordinate of next point 下一个点的Y坐标 - + Z coordinate of next point 下一个点的Z坐标 - + Enter point 输入点 - + Enter a new point with the given coordinates 以给定座标方式新增点 - + Length 长度 - + Angle 角度 - + Length of current segment 此线段之长度 - + Angle of current segment 此线段之角度 - + Radius 半径 - + Radius of Circle 圆半径 - + If checked, command will not finish until you press the command button again 选中则命令连续运行直至再次按下命令按钮 - + If checked, an OCC-style offset will be performed instead of the classic offset 若选中则使用OCC风格偏移而非经典偏移 - + &OCC-style offset &OCC风格偏移 - + Add points to the current object 将点添加到当前对象 - + Remove points from the current object 从当前对象中删除点 - + Make Bezier node sharp 使贝塞尔节点尖锐 - + Make Bezier node tangent 使贝塞尔节点相切 - + Make Bezier node symmetric 使贝塞尔节点对称 - + Sides 侧面 - + Number of sides 边数 - + Offset 偏移 - + XY (top) XY (上面图) - - Select XY plane - 选择XY平面 - - - + XZ (front) XZ (正面图) - - Select XZ plane - 选择XZ平面 - - - + YZ (side) YZ (侧面图) - - Select YZ plane - 选择YZ平面 - - - + View 视图 - - Select plane perpendicular to the current view - 选择垂直于当前视图的平面 - - - + Auto 自动 - - Do not project points to a drawing plane - 不在绘图平面上投影点 - - - + Text string to draw 要绘制的文本字符串 - + String 字符串 - + Height of text 字高 - + Height 高度 - + Intercharacter spacing 文字间距 - + Tracking 追踪 - + Full path to font file: 字体文件的完整路径: - + Open a FileChooser for font file 选取字体文档 - + Grid spacing 网格间距 - + The spacing between the grid lines 网格线之间的间距 - + Main line every 每段干线 - + The number of lines between main lines 主线之间的线数 - + Center plane on view 视图中的中心平面 - - Select Plane - 选择平面 - - - + Line 线 - + DWire 草图线 - + Circle 圆 - + Center X 圆心 X - + Arc 圆弧 - + Point 点 - + Label 标签 - + Distance 距离 - + Trim 修剪 - + Pick Object 选择对象 - + Edit 编辑 - + Global X 全局 X - + Global Y 全局 Y - + Global Z 全局 Z - + Local X 区域 X - + Local Y 区域 Y - + Local Z 区域 Z - + Invalid Size value. Using 200.0. 无效值。使用200.0。 - + Invalid Tracking value. Using 0. 无效的追踪值。使用0。 - + Please enter a text string. 请输入一段文字。 - + Select a Font file 选择一个字体文件 - + Please enter a font file. 请输入字体文件。 - + Autogroup: 自动群组: - + Faces 面 - + Remove 删除 - + Add 添加 - + Facebinder elements Facebinder 构件 - + Create Line 创建线 - - Pick next point: - - 选择下一点: - - - + Convert to Wire 转换为线 - + BSpline B样条曲线 - + BezCurve 贝兹曲线 - + Create BezCurve 建立贝赛尔曲线 - + Rectangle 矩形 - + Create Plane 建立平面 - + Create Rectangle 创建矩形 - + Create Circle 创建圆 - + Create Arc 创建弧 - + Start Angle 起始角度 - + Aperture 张角 - + Polygon 多边形 - + Create Polygon 创建多边形 - + Ellipse 椭圆 - + Create Ellipse 建立椭圆 - + Text 文本 - + Create Text 创建文本 - + Dimension 尺寸标注 - + Create Dimension 创建尺寸标注 - + ShapeString 字串造型产生器 - + Create ShapeString 建立字串造型产生器 - + Copy 复制 - + Move 移动 - + Change Style 更改样式 - + Rotate 旋转 - - Cannot offset this object type - - 无法偏移此类对象 - - - + Stretch 拉伸 - + Upgrade 升级 - + Downgrade 降级 - + Selection is not a Knot 选择不是一个结点 - + Convert to Sketch 转换为草图 - + Convert to Draft 转换为底图 - + Convert 转换 - + Array 阵列 - + Create Point 创建点 - + Mirror 镜像 - + &Draft 底图(&D) @@ -3606,179 +3774,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 的说明启动FreeCAD来下载这些函数库，并回答确定。 - + Draft.makeBSpline: not enough points Draft.makeBSpline︰ 没有足够的点 - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline︰ 强制关闭等效的端点 - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline︰ 无效的点列表 - + No object given 没有给定的对象 - + The two points are coincident 这两点是重合的 - + Found groups: closing each open object inside 发现群组：关闭内部的每个打开对象 - + Found mesh(es): turning into Part shapes 发现网格: 转换为零件形状 - + Found 1 solidifiable object: solidifying it 发现1个可实体化对象: 将其实体化 - + Found 2 objects: fusing them 找到2个对象: 融合它们 - + Found several objects: creating a shell 找到多个对象: 创建壳体 - + Found several coplanar objects or faces: creating one face 找到几个共面对象或面: 创建一个面 - + Found 1 non-parametric objects: draftifying it 找到1个非参数对象: 对其进行编辑 - + Found 1 closed sketch object: creating a face from it 发现一个闭合的草图对象: 由它创造一个面 - + Found 1 linear object: converting to line 找到1个线性对象: 转换为直线 - + Found closed wires: creating faces 找到闭合线: 创建面 - + Found 1 open wire: closing it 发现 1 个开口线：封闭它 - + Found several open wires: joining them 发现几个开放的线段︰ 将它们联结起来 - + Found several edges: wiring them 找到了几个边缘：连接它们 - + Found several non-treatable objects: creating compound 找到数个未设定物件：建立元件 - + Unable to upgrade these objects. 无法升级这些对象 - + Found 1 block: exploding it 发现一个图块：进行拆解 - + Found 1 multi-solids compound: exploding it 发现一个多实体组合：进行拆解 - + Found 1 parametric object: breaking its dependencies 找到1个参数化对象: 打破其依赖关系 - + Found 2 objects: subtracting them 找到2个对象: 删掉它们 - + Found several faces: splitting them 找到多个面：分割它们 - + Found several objects: subtracting them from the first one 发现多个对象: 从第一个对象中减去它们 - + Found 1 face: extracting its wires 找到一个面: 提取其线段 - + Found only wires: extracting their edges 只找到线段: 提取它们的边缘 - + No more downgrade possible 无法再降级 - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline. createGeometry: 以相同的第一/最后一点结束。几何图形未更新。 - + No point found 未找到点 - + ShapeString: string has no wires ShapeString: 字符串没有线 - + Relative 相对 - + Continue 继续 - + Close 关闭 @@ -3823,7 +3991,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 限制z轴 - + Select edge 选取边 @@ -3838,7 +4006,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 长度模式 - + Wipe 清除 @@ -3853,454 +4021,279 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 画圈捕捉对象 - + Check this to lock the current angle 勾选以锁定当前角度 - + Coordinates relative to last point or absolute 相对于最后一个点或绝对值的坐标 - + Filled 填充 - - Check this if the object should appear as filled, otherwise it will appear as wireframe - 如果对象需显示为填充, 请勾选此项, 否则它将显示为线框 - - - + Finish 完成 - + Finishes the current drawing or editing operation 完成当前绘图或编辑操作 - + &Undo (CTRL+Z) 撤消 (&U, Ctrl + Z) - + Undo the last segment 撤消最近一次面创建 - + Finishes and closes the current line 处理后关闭当前线 - + Wipes the existing segments of this line and starts again from the last point 清除线的已有部分并从上一点重新开始 - + Set WP 设置WP - + Reorients the working plane on the last segment 重定向最后一段(或几段) 的工作平面 - + Selects an existing edge to be measured by this dimension 选取一个将由此尺寸来测量的现有边 - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands 如果选中, 对象将被复制而不是移动。首选项-> 草图-> 全局下的复制模式, 将在后续的操作中继续保留此模式 - - options - 选项 - - - + Default 默认 - + Pick a face to define the drawing plane 选择一个面来定义绘图平面 - - First point: - 第一点: - - - - Closing - 闭合 - - - + Create Wire 创建线 - - Removing last point - 删除最后一点 - - - - Next point: - 下一点: - - - - Restarting from - 正在重启... - - - + Unable to create a Wire from selected objects 无法从所选对象创建连线 - + Spline has been closed 样条线已闭合 - + Last point has been removed 最后一点已被删除 - - Pick next point, or Finish (shift-F) or close (o): - 选取下一个点, 或完成 (shift-F) 或关闭 (o): - - - + Create B-spline 创建 B-样条 - + Bezier curve has been closed 贝塞尔曲线已封闭 - - Pick first point: - 选取起点: - - - - Pick opposite point: - 选择相对点： - - - - Pick center point: - 选取中心点: - - - - Pick radius: - 选取半径 - - - - Pick start angle: - 选择起始角度: - - - - Pick aperture: - 选择孔径： - - - - Aperture angle: - 孔径角： - - - - Pick location point: - 选择位置点: - - - + Edges don't intersect! 边缘不相交! - + Pick ShapeString location point: 选取字样生成器定位点： - + Select an object to move 选择要移动的对象 - - Pick start point: - 选择起始点： - - - - Pick end point: - 选取端点: - - - + Select an object to rotate 选择要旋转的对象 - - Pick rotation center: - 选择旋转中心: - - - - Pick base angle: - 选择基角： - - - - Pick rotation angle: - 选择旋转角度: - - - + Select an object to offset 选择要偏移的对象 - + Offset only works on one object at a time 偏移操作一次只对一个对象起作用 - + Sorry, offset of Bezier curves is currently still not supported 抱歉，目前尚未支持贝塞尔曲线的偏移复制 - - Pick distance: - 选择距离: - - - + Select an object to stretch 选择要拉伸的对象 - - Pick first point of selection rectangle: - 选取矩形的第一个点: - - - - Pick opposite point of selection rectangle: - 选取矩形的相对点: - - - - Pick start point of displacement: - 选择位移的起点: - - - - Pick end point of displacement: - 选择位移的终点: - - - + Turning one Rectangle into a Wire 将一个矩形变成一条连线 - + Select an object to join 选择要连接的对象 - + Join 拼接 - + Select an object to split 选择要拆分的对象 - + Select an object to upgrade 选择要升级的对象 - + Select object(s) to trim/extend 选择要修剪/延伸的对象 - + Unable to trim these objects, only Draft wires and arcs are supported 无法修剪这些对象，改操作仅支持草图下的线段及弧线 - + Unable to trim these objects, too many wires 过多线段导致无法修剪这些对象 - + These objects don't intersect 这些对象没有交叉 - + Too many intersection points 太多的交叉点 - + Select an object to scale 选择要缩放的对象 - - Pick base point: - 选择基点： - - - - Pick reference distance from base point: - 选择与基点的参考距离: - - - - Pick new distance from base point: - 选择与基准点的参考距离: - - - + Select an object to project 选择要投影的对象 - - This object type is not editable - 此对象类型不可编辑 - - - + Please select only one object 请只选择一个对象 - + Select a Draft object to edit 选择要编辑的 "草图" 对象 - + Active object must have more than two points/nodes 激活的对象必须有两个以上的点/节点 - + Endpoint of BezCurve can't be smoothed 贝兹曲线的端点无法平滑 - + Select an object to convert 选择要转换的对象 - + Select an object to array 选择要进行阵列操作的对象 - + Please select base and path objects 请选择基础和路径对象 - + Please select base and pointlist objects 请选择基点和点列表对象 - + Select an object to clone 选择一个需要克隆的对象 - + Select face(s) on existing object(s) 在现有对象上选择面 - + Select an object to mirror 选择要镜像的对象 - - Pick start point of mirror line: - 选取镜像线的起始点: - - - - Pick end point of mirror line: - 选取镜像线的端点: - - - + This tool only works with Wires and Lines 此工具仅适用于连线和直线 - - - Pick target point: - 选取目标点: - - - - Pick endpoint of leader line: - 选取引线的端点: - - - - Pick text position: - 选取文本位置: - ODA (formerly Teigha) File Converter not found, DWG support is disabled 找不到 oda (原 teigha) 文件转换器, dwg 格式文件支持被禁用 - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4310,56 +4303,354 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale 缩放 - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + 俯视 + + + + Front + 前视 + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + 自动 + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + 旋转 + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + 吃水深度 + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + 实用程序 + + + + Wire tools + 线框工具 + + + + Snapping + 对齐功能 + diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index 9694c08720..06ba88fb70 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 94816158a3..6ec458baf4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -4,770 +4,805 @@ App::Property - + Defines a hatch pattern 定義剖面線樣式 - + Sets the size of the pattern 設置圖樣的大小 - + Startpoint of dimension 尺寸的起始點 - + Endpoint of dimension 尺寸的終點 - + Point through which the dimension line passes 尺寸線通過的點 - + The object measured by this dimension The object measured by this dimension - + The geometry this dimension is linked to The geometry this dimension is linked to - + The measurement of this dimension 此尺寸的測量 - + For arc/circle measurements, false = radius, true = diameter 對弧/圓的測量，false = 半徑，true = 直徑 - + Font size 字型尺寸 - + The number of decimals to show 顯示位數 - + Arrow size 箭頭尺寸 - + The spacing between the text and the dimension line 文字與尺寸線間的間距 - + Arrow type 箭頭樣式 - + Font name 字體名稱 - + Line width 線寬 - + Line color 線條顏色 - + Length of the extension lines 延長線長度 - + Rotate the dimension arrows 180 degrees 將尺寸箭頭旋轉180度 - + Rotate the dimension text 180 degrees 將尺寸文字旋轉180度 - + Show the unit suffix Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default A unit to express the measurement. Leave blank for system default - + Start angle of the dimension Start angle of the dimension - + End angle of the dimension End angle of the dimension - + The center point of this dimension The center point of this dimension - + The normal direction of this dimension The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length Text override. Use 'dim' to insert the dimension length - + Length of the rectangle Length of the rectangle - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners - + Create a face Create a face - + Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) - + Start angle of the arc 圓弧的起始角度 - + End angle of the arc (for a full circle, give it same value as First Angle) 圓弧的結束角度 (對於完整的圓, 給它與起始角度相同的值) - + Radius of the circle 圓的半徑 - + The minor radius of the ellipse 橢圓的短軸半徑 - + The major radius of the ellipse 橢圓的長軸半徑 - + The vertices of the wire The vertices of the wire - + If the wire is closed or not If the wire is closed or not - + The start point of this line 此線段之起點 - + The end point of this line 此線段之終點 - + The length of this line The length of this line - + Create a face if this object is closed Create a face if this object is closed - + The number of subdivisions of each edge The number of subdivisions of each edge - + Number of faces Number of faces - + Radius of the control circle Radius of the control circle - + How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle - + Projection direction Projection direction - + The width of the lines inside this object The width of the lines inside this object - + The size of the texts inside this object 此對象內文本的大小 - + The spacing between lines of text 文本行之間的間距 - + The color of the projected objects 專案物件的顏色 - + The linked object 鏈接的對象 - + Shape Fill Style Shape Fill Style - + Line Style 線條樣式 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果選中，則無論在 3D 模型中是否可見，都將顯示源對象 - + Create a face if this spline is closed Create a face if this spline is closed - + Parameterization factor Parameterization factor - + The points of the Bezier curve The points of the Bezier curve - + The degree of the Bezier function The degree of the Bezier function - + Continuity Continuity - + If the Bezier curve should be closed or not If the Bezier curve should be closed or not - + Create a face if this curve is closed Create a face if this curve is closed - + The components of this block The components of this block - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines 顯示影藏線 - + The base object that must be duplicated The base object that must be duplicated - + The type of array to create The type of array to create - + The axis direction The axis direction - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Number of copies Number of copies - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction Distance and orientation of intervals in Axis direction - + Center point Center point - + Angle to cover with copies Angle to cover with copies - + Specifies if copies must be fused (slower) Specifies if copies must be fused (slower) - + The path object along which to distribute objects The path object along which to distribute objects - + Selected subobjects (edges) of PathObj Selected subobjects (edges) of PathObj - + Optional translation vector Optional translation vector - + Orientation of Base along path Orientation of Base along path - + X Location X Location - + Y Location Y Location - + Z Location Z Location - + Text string Text string - + Font file name Font file name - + Height of text 字高 - + Inter-character spacing Inter-character spacing - + Linked faces Linked faces - + Specifies if splitter lines must be removed Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces - + Height of the rectangle Height of the rectangle - + Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle - + The placement of this object 這個對象的位置 - + The display length of this section plane 此剖面的顯示長度 - + The size of the arrows of this section plane 此剖面箭頭的大小 - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects - + The length of the straight segment The length of the straight segment - + The point indicated by this label The point indicated by this label - + The points defining the label polyline The points defining the label polyline - + The direction of the straight segment The direction of the straight segment - + The type of information shown by this label The type of information shown by this label - + The target object of this label The target object of this label - + The text to display when type is set to custom The text to display when type is set to custom - + The text displayed by this label The text displayed by this label - + The size of the text The size of the text - + The font of the text The font of the text - + The size of the arrow The size of the arrow - + The vertical alignment of the text The vertical alignment of the text - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Text color Text color - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line Length of the extension line above the dimension line - + The points of the B-spline The points of the B-spline - + If the B-spline is closed or not If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible If this is True, this object will be recomputed only if it is visible - + Base 基礎 - + PointList PointList - + Count 計數 - + The objects included in this clone The objects included in this clone - + The scale factor of this clone The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew This specifies if the shapes sew - + Display a leader line or not Display a leader line or not - + The text displayed by this object The text displayed by this object - + Line spacing (relative to font size) Line spacing (relative to font size) - + The area of this object The area of this object - + Displays a Dimension symbol at the end of the wire Displays a Dimension symbol at the end of the wire - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material + + + The objects that are part of this layer + The objects that are part of this layer + + + + If on, the child objects of this layer will match its visual aspects + If on, the child objects of this layer will match its visual aspects + + + + The line color of the children of this layer + The line color of the children of this layer + + + + The shape color of the children of this layer + The shape color of the children of this layer + + + + The line width of the children of this layer + The line width of the children of this layer + + + + The draw style of the children of this layer + The draw style of the children of this layer + + + + The transparency of the children of this layer + The transparency of the children of this layer + Draft - + Slope Slope - + Scale 縮放 - + Writing camera position Writing camera position - + Writing objects shown/hidden state Writing objects shown/hidden state - + X factor X factor - + Y factor Y factor - + Z factor Z factor - + Uniform scaling Uniform scaling - + Working plane orientation Working plane orientation @@ -781,20 +816,25 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat This Wire is already flat - + Pick from/to points Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + Create a clone + 建立一個副本 + DraftShapeStringGui @@ -862,12 +902,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the Construction group Adds the selected objects to the Construction group @@ -875,12 +915,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point 添加點 - + Adds a point to an existing Wire or B-spline Adds a point to an existing Wire or B-spline @@ -888,12 +928,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... Move to group... - + Moves the selected object(s) to an existing group Moves the selected object(s) to an existing group @@ -901,12 +941,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style 套用目前的樣式 - + Applies current line width and color to selected objects 將當前的線寬和顏色應用於所選物件 @@ -914,12 +954,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc 弧 - + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain @@ -927,7 +967,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools Arc tools @@ -935,12 +975,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points Arc 3 points - + Creates an arc by 3 points Creates an arc by 3 points @@ -948,12 +988,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array 矩陣 - + Creates a polar or rectangular array from a selected object 由所選物件建立一個極或矩形陣列 @@ -961,12 +1001,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup 自動群組 - + Select a group to automatically add all Draft & Arch objects to 自動加入所有草圖跟建築物件到選擇的群組 @@ -974,12 +1014,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -987,12 +1027,12 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve 貝茲曲線 - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain 建立貝茲曲線,CTRL可鎖點,SHIFT可限制 @@ -1000,7 +1040,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools Bezier tools @@ -1008,12 +1048,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle 圓 - + Creates a circle. CTRL to snap, ALT to select tangent objects 創建圓。按Ctrl 貼齊、按ALT 選擇相切物件 @@ -1021,12 +1061,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone 複製 - + Clones the selected object(s) 複製所選物件 @@ -1034,12 +1074,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line 閉合線段 - + Closes the line being drawn 閉合正在繪製的線條 @@ -1047,12 +1087,12 @@ from menu Tools -> Addon Manager Draft_CubicBezCurve - + CubicBezCurve CubicBezCurve - + Creates a Cubic Bezier curve Click and drag to define control points. CTRL to snap, SHIFT to constrain Creates a Cubic Bezier curve @@ -1062,12 +1102,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point 移除點 - + Removes a point from an existing Wire or B-spline Removes a point from an existing Wire or B-spline @@ -1075,12 +1115,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Dimension - + Dimension 標註 - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 創建標註。按CTRL 貼齊，按SHIFT 正交，按ALT 選取線段 @@ -1088,12 +1128,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade 降級 - + Explodes the selected objects into simpler objects, or subtracts faces 將所選物件分解為更簡單的物件或移除面 @@ -1101,12 +1141,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch 底圖至草圖 - + Convert bidirectionally between Draft and Sketch objects 於底圖及草圖物件間雙向轉換 @@ -1114,12 +1154,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing 圖面 - + Puts the selected objects on a Drawing sheet Puts the selected objects on a Drawing sheet @@ -1127,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit 編輯 - + Edits the active object 編輯使用中物件 @@ -1140,30 +1180,25 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved Edit Improved - + Edits the selected objects Edits the selected objects - - - Select an object to edit - Select an object to edit - Draft_Ellipse - + Ellipse 橢圓 - + Creates an ellipse. CTRL to snap 建立一個橢圓，CTRL可鎖點 @@ -1171,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder 面連接器 - + Creates a facebinder object from selected face(s) 由所選面中建立一個面連接器物件 @@ -1184,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FinishLine - + Finish line 完成線 - + Finishes a line without closing it 完成線而不閉合它 @@ -1197,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension 翻轉維度 - + Flip the normal direction of a dimension 翻轉一維度的法線方向 @@ -1210,12 +1245,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal 修復 - + Heal faulty Draft objects saved from an earlier FreeCAD version 修復以較早FreeCAD版本儲存之底圖物件 @@ -1223,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join Join - + Joins two wires together Joins two wires together @@ -1236,25 +1271,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label Label - + Creates a label, optionally attached to a selected object or element Creates a label, optionally attached to a selected object or element + + Draft_Layer + + + Layer + Layer + + + + Adds a layer + Adds a layer + + Draft_Line - + Line 線 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 創建 2點線。Ctrl 鍵可對齊，SHIFT 鍵正交限制 @@ -1262,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror 鏡射 - + Mirrors the selected objects along a line defined by two points 依由兩點定義而來的對稱線鏡射所選物件 @@ -1275,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move 移動 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1288,12 +1336,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset 偏移複製 - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy 偏移複製使用中物件。按Ctrl 貼齊，按SHIFT 正交，按ALT 複製 @@ -1301,12 +1349,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray 路徑陣列 - + Creates copies of a selected object along a selected path. 沿所選路徑建立所選物件之複製 @@ -1314,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point 點 - + Creates a point object 建立一個點物件 @@ -1327,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray PointArray - + Creates copies of a selected object on the position of points. Creates copies of a selected object on the position of points. @@ -1340,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Polygon - + Polygon 多邊形 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 創建正多邊形。按CTRL 貼齊，按SHIFT 正交 @@ -1353,12 +1401,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rectangle - + Rectangle 矩形 - + Creates a 2-point rectangle. CTRL to snap 創建 2 點矩形。按Ctrl 貼齊 @@ -1366,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate 旋轉 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 旋轉所選的物件。按CTRL 貼齊，按SHIFT 正交，按ALT 創建副本 @@ -1379,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale 縮放 - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 從基準點縮放選取的物件。按CTRL 貼齊，按SHIFT 正交，按ALT 複製 @@ -1392,12 +1440,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group 選取群組 - + Selects all objects with the same parents as this group 選取此群組中同系物件 @@ -1405,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectPlane - + SelectPlane 選取平面 - + Select a working plane for geometry creation 選取一個幾何創建的工作平面 @@ -1418,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane Creates a proxy object from the current working plane - + Create Working Plane Proxy Create Working Plane Proxy @@ -1431,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view 造型2D視圖 - + Creates Shape 2D views of selected objects 建立選定物件之2D造型視圖 @@ -1444,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShapeString - + Shape from text... 由文字建立造型... - + Creates text string in shapes. 於造型上建立文字 @@ -1457,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar 顯示鎖點列 - + Shows Draft snap toolbar 顯示底圖鎖點工具列 @@ -1470,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope Set Slope - + Sets the slope of a selected Line or Wire Sets the slope of a selected Line or Wire @@ -1483,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles 角度 - + Snaps to 45 and 90 degrees points on arcs and circles 鎖定圓及弧的四分點 @@ -1496,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center 中心 - + Snaps to center of circles and arcs 鎖定圓及弧的中心點 @@ -1509,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions 尺寸 - + Shows temporary dimensions when snapping to Arch objects 於鎖定弧時顯示目前的尺寸 @@ -1522,12 +1570,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint 終點 - + Snaps to endpoints of edges 鎖定邊之端點 @@ -1535,12 +1583,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension 延伸 - + Snaps to extension of edges 對齊邊之延伸 @@ -1548,12 +1596,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid 格線 - + Snaps to grid points 對齊至格線上之點 @@ -1561,12 +1609,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection 交集 - + Snaps to edges intersections 對齊至邊之交叉處 @@ -1574,17 +1622,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off 切換開/關 - + Activates/deactivates all snap tools at once 一次啟動/取消所有鎖點工具 - + Lock Lock @@ -1592,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint 中點 - + Snaps to midpoints of edges 對齊至邊之中點 @@ -1605,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest 最近處 - + Snaps to nearest point on edges 對齊至邊上的最近點 @@ -1618,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho 垂直 - + Snaps to orthogonal and 45 degrees directions 鎖定至垂直或45度方向 @@ -1631,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel 平行 - + Snaps to parallel directions of edges 鎖定至邊之平行方向 @@ -1644,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular 垂直 - + Snaps to perpendicular points on edges 鎖點至邊上的垂直點 @@ -1657,12 +1705,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special Special - + Snaps to special locations of objects Snaps to special locations of objects @@ -1670,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane 工作平面 - + Restricts the snapped point to the current working plane 限制目前工作平面被鎖定的點 @@ -1683,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split Split - + Splits a wire into two wires Splits a wire into two wires @@ -1696,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch Stretch - + Stretches the selected objects Stretches the selected objects @@ -1709,12 +1757,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Text - + Text 文字 - + Creates an annotation. CTRL to snap 創建註解。按Ctrl 貼齊 @@ -1722,12 +1770,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. 切換下一個物件的建造模式。 - + Toggle Construction Mode Toggle Construction Mode @@ -1735,12 +1783,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode 切換連續模式 - + Toggles the Continue Mode for next commands. 為下一個指令切換連續模式 @@ -1748,12 +1796,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode 切換顯示模式 - + Swaps display mode of selected objects between wireframe and flatlines 切換選取物件(線框和平板+邊緣)之間的顯示模式 @@ -1761,22 +1809,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid 切換網格 - + Toggles the Draft grid on/off 開/關底圖格線 - + Grid 格線 - + Toggles the Draft grid On/Off Toggles the Draft grid On/Off @@ -1784,12 +1832,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex 修剪及延伸 - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 修剪或延展選定物件或延展單一面,CTRL為快速,SHIFT為手動限制為目前片斷或垂直,ALT為相反 @@ -1797,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_UndoLine - + Undo last segment 復原上一段 - + Undoes the last drawn segment of the line being drawn 復原已繪製線的上一線段 @@ -1810,51 +1858,38 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade 升級 - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces Joins the selected objects into one, or converts closed wires to filled faces, or unites faces - - Draft_VisGroup - - - VisGroup - VisGroup - - - - Adds a VisGroup - 增加 VisGroup - - Draft_Wire - - DWire - DWire + + Polyline + Polyline - - Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - 建立一多點底圖線(DWire),CTRL可快選,SHIFT可限制 + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline Wire to B-spline - + Converts between Wire and B-spline Converts between Wire and B-spline @@ -1862,22 +1897,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Gui::Dialog::DlgSettingsDraft - + General Draft Settings 一般底圖設定 - + This is the default color for objects being drawn while in construction mode. 這是建構模式中繪製物件的預設顏色。 - + This is the default group name for construction geometry 這是建構幾何的預設組名稱 - + Construction 建構 @@ -1887,37 +1922,37 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain儲存目前色彩及線寬橫跨工作階段 - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode 若勾選此項，複製模式將被保存在指令中，否則指令開始時將維持在不複製模式 - + Global copy mode 全球複製模式 - + Default working plane 預設工作平面 - + None 無 - + XY (Top) XY （上） - + XZ (Front) XZ (正面) - + YZ (Side) YZ（側面） @@ -1985,12 +2020,12 @@ such as "Arial:Bold" 一般設定 - + Construction group name 建構群組名稱 - + Tolerance 公差 @@ -2015,22 +2050,22 @@ such as "Arial:Bold" 您可於此指定含有SVG檔之目錄,其含有可加入標準底圖影像之特徵定義 - + Draft interface mode 底圖介面模式 - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction 此為底圖模組之使用者介面模式，可執行：工具列模式將含有所有底圖設定於各別之工具列，工作列模式則對所有使用者介面採用FreeCAD工作視圖 - + Toolbar 工具列 - + Taskview 工作視圖 @@ -2060,12 +2095,12 @@ such as "Arial:Bold" Alt模式 - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. 通常複製物件後,會選定複製者，若勾選此項，將改為選定原始物件 - + Select base objects after copying 複製後選定原始物件 @@ -2100,7 +2135,7 @@ such as "Arial:Bold" 主線較粗,特別於主線間有許多方形時 - + Internal precision level 內部精度等級 @@ -2215,12 +2250,12 @@ such as "Arial:Bold" 轉換白線色彩為黑色 - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. 勾選時，底圖工具若許可會以建立零件圖元來取代底圖物件。 - + Use Part Primitives when available 當許可時使用零件圖元 @@ -2240,12 +2275,7 @@ such as "Arial:Bold" 持續鎖點(取消鎖點模式) - - Construction geometry - 構造幾何 - - - + Construction geometry color 輔助用幾何色彩 @@ -2385,7 +2415,7 @@ such as "Arial:Bold" 選擇一個字型檔 - + Fill objects with faces whenever possible 當可行時將物件以面填滿 @@ -2675,7 +2705,7 @@ such as "Arial:Bold" 自動更新(僅適用於舊的匯入器) - + Prefix labels of Clones with: Prefix labels of Clones with: @@ -2714,7 +2744,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: This is the method chosen for importing SVG object color into FreeCAD. - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2794,17 +2824,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands - - - - Verbose command line mode - Verbose command line mode - - - + When drawing lines, set focus on Length instead of X coordinate When drawing lines, set focus on Length instead of X coordinate @@ -2884,12 +2904,12 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: Max Spline Segment: - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. This is the value used by functions that use a tolerance. @@ -2900,693 +2920,841 @@ Values with differences below this value will be treated as same. This value wil Use legacy python exporter Use legacy python exporter + + + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + + + + Set the Support properry when possible + Set the Support properry when possible + + + + Construction Geometry + Construction Geometry + + + + In-Command Shortcuts + In-Command Shortcuts + + + + Relative + Relative + + + + R + R + + + + Continue + Continue + + + + T + T + + + + Close + 關閉 + + + + O + O + + + + Copy + 複製 + + + + P + P + + + + Subelement Mode + Subelement Mode + + + + D + D + + + + Fill + Fill + + + + L + L + + + + Exit + Exit + + + + A + A + + + + Select Edge + Select Edge + + + + E + E + + + + Add Hold + Add Hold + + + + Q + Q + + + + Length + 長度 + + + + H + H + + + + Wipe + Wipe + + + + W + W + + + + Set WP + Set WP + + + + U + U + + + + Cycle Snap + Cycle Snap + + + + ` + ` + + + + Snap + Snap + + + + S + S + + + + Increase Radius + Increase Radius + + + + [ + [ + + + + Decrease Radius + Decrease Radius + + + + ] + ] + + + + Restrict X + Restrict X + + + + X + X + + + + Restrict Y + Restrict Y + + + + Y + Ÿ + + + + Restrict Z + Restrict Z + + + + Z + Z + + + + Grid color + Grid color + Workbench - + Draft Snap 底圖鎖點 - - - Draft creation tools - 底圖建立工具 - - - - Draft modification tools - 底圖修改工具 - - - - Utilities - 功能 - - - - Wire tools - 線條工具 - - - - Snapping - 對齊 - draft - + not shape found not shape found - + All Shapes must be co-planar All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. 給定的物件非平面並且無法轉換為草圖 - + Unable to guess the normal direction of this object Unable to guess the normal direction of this object - + Draft Command Bar 底圖指令列 - + Toggle construction mode Toggle construction mode - + Current line color Current line color - + Current face color Current face color - + Current line width Current line width - + Current font size Current font size - + Apply to selected objects 應用於所選物件 - + Autogroup off Autogroup off - + active command: 啟動指令： - + None 無 - + Active Draft command 啟動底圖指令 - + X coordinate of next point 下一個點的X座標 - + X X - + Y Ÿ - + Z Z - + Y coordinate of next point 下一個點的Y座標 - + Z coordinate of next point 下一個點的Z座標 - + Enter point 新增點 - + Enter a new point with the given coordinates 以給定座標方式新增點 - + Length 長度 - + Angle 角度 - + Length of current segment 此線段之長度 - + Angle of current segment 此線段之角度 - + Radius 半徑 - + Radius of Circle 圓半徑 - + If checked, command will not finish until you press the command button again 如果選取，命令將不會完成直到你再次按這個命令按鈕 - + If checked, an OCC-style offset will be performed instead of the classic offset 若勾選,會以OCC型式取代基本印刷型式 - + &OCC-style offset &OCC型式印刷 - + Add points to the current object 於目前物件中增加點 - + Remove points from the current object 將點從目前物件上移除 - + Make Bezier node sharp 使貝茲曲線節點銳利 - + Make Bezier node tangent 使貝茲曲線節點相切 - + Make Bezier node symmetric 使貝茲曲線節點對稱 - + Sides Sides - + Number of sides 邊數 - + Offset 偏移複製 - + XY (top) XY (top) - - Select XY plane - 選擇 XY 平面 - - - + XZ (front) XZ (front) - - Select XZ plane - 選擇 XZ平面 - - - + YZ (side) YZ (side) - - Select YZ plane - 選擇 YZ 平面 - - - + View 檢視 - - Select plane perpendicular to the current view - 選取垂直於當前視圖的平面 - - - + Auto 自動 - - Do not project points to a drawing plane - 不投射點到繪圖平面 - - - + Text string to draw 要繪製之文字字串 - + String 字串 - + Height of text 字高 - + Height 高度 - + Intercharacter spacing 字元間距 - + Tracking 追蹤 - + Full path to font file: 字型檔完整路徑： - + Open a FileChooser for font file 選取字型檔 - + Grid spacing 網格間距 - + The spacing between the grid lines The spacing between the grid lines - + Main line every Main line every - + The number of lines between main lines The number of lines between main lines - + Center plane on view Center plane on view - - Select Plane - 選擇平面 - - - + Line 線 - + DWire DWire - + Circle 圓 - + Center X 中心 X - + Arc 弧 - + Point 點 - + Label Label - + Distance 距離 - + Trim 修剪 - + Pick Object 選取物件 - + Edit 編輯 - + Global X 全域X - + Global Y 全域Y - + Global Z 全域Z - + Local X 區域X - + Local Y 區域Y - + Local Z 區域Z - + Invalid Size value. Using 200.0. 無效值。使用 200.0。 - + Invalid Tracking value. Using 0. 追蹤的值無效。使用 0。 - + Please enter a text string. 請輸入一段文字 - + Select a Font file 選擇一個字型檔 - + Please enter a font file. 請輸入字型檔。 - + Autogroup: Autogroup: - + Faces 面 - + Remove 移除 - + Add 新增 - + Facebinder elements Facebinder elements - + Create Line 建立線 - - Pick next point: - - 選取下一個點： - - - + Convert to Wire Convert to Wire - + BSpline BSpline - + BezCurve 貝茲曲線 - + Create BezCurve 建立貝茲曲線 - + Rectangle 矩形 - + Create Plane 建立平面 - + Create Rectangle 建立矩型 - + Create Circle 建立圓 - + Create Arc 建立弧線 - + Start Angle 起始角度 - + Aperture 孔徑 - + Polygon 多邊形 - + Create Polygon 建立多邊形 - + Ellipse 橢圓 - + Create Ellipse 建立橢圓 - + Text 文字 - + Create Text 建立文字 - + Dimension 標註 - + Create Dimension 建立尺度 - + ShapeString 字串造型產生器 - + Create ShapeString 建立字串造型產生器 - + Copy 複製 - + Move 移動 - + Change Style 改變樣式 - + Rotate 旋轉 - - Cannot offset this object type - - 無法顯示此物件類型 - - - + Stretch Stretch - + Upgrade 升級 - + Downgrade 降級 - + Selection is not a Knot Selection is not a Knot - + Convert to Sketch 轉換為草圖 - + Convert to Draft 轉換為底圖 - + Convert 轉換 - + Array 矩陣 - + Create Point 建立點 - + Mirror 鏡射 - + &Draft 底圖(&D) @@ -3608,179 +3776,179 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 之說明啟動FreeCAD來下載這些函式庫，並回答確定。 - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + No object given No object given - + The two points are coincident The two points are coincident - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - + Found several objects: creating a shell Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line Found 1 linear object: converting to line - + Found closed wires: creating faces Found closed wires: creating faces - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - + Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them Found 2 objects: subtracting them - + Found several faces: splitting them Found several faces: splitting them - + Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires Found 1 face: extracting its wires - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found No point found - + ShapeString: string has no wires ShapeString: string has no wires - + Relative Relative - + Continue Continue - + Close 關閉 @@ -3825,7 +3993,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Restrict Z - + Select edge Select edge @@ -3840,7 +4008,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Length mode - + Wipe Wipe @@ -3855,454 +4023,279 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cycle snap object - + Check this to lock the current angle Check this to lock the current angle - + Coordinates relative to last point or absolute Coordinates relative to last point or absolute - + Filled Filled - - Check this if the object should appear as filled, otherwise it will appear as wireframe - Check this if the object should appear as filled, otherwise it will appear as wireframe - - - + Finish 結束 - + Finishes the current drawing or editing operation Finishes the current drawing or editing operation - + &Undo (CTRL+Z) &Undo (CTRL+Z) - + Undo the last segment Undo the last segment - + Finishes and closes the current line Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point - + Set WP Set WP - + Reorients the working plane on the last segment Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - - options - options - - - + Default 預設 - + Pick a face to define the drawing plane Pick a face to define the drawing plane - - First point: - First point: - - - - Closing - Closing - - - + Create Wire Create Wire - - Removing last point - Removing last point - - - - Next point: - Next point: - - - - Restarting from - Restarting from - - - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Spline has been closed Spline has been closed - + Last point has been removed Last point has been removed - - Pick next point, or Finish (shift-F) or close (o): - Pick next point, or Finish (shift-F) or close (o): - - - + Create B-spline Create B-spline - + Bezier curve has been closed Bezier curve has been closed - - Pick first point: - Pick first point: - - - - Pick opposite point: - Pick opposite point: - - - - Pick center point: - Pick center point: - - - - Pick radius: - Pick radius: - - - - Pick start angle: - Pick start angle: - - - - Pick aperture: - Pick aperture: - - - - Aperture angle: - Aperture angle: - - - - Pick location point: - Pick location point: - - - + Edges don't intersect! Edges don't intersect! - + Pick ShapeString location point: Pick ShapeString location point: - + Select an object to move Select an object to move - - Pick start point: - Pick start point: - - - - Pick end point: - Pick end point: - - - + Select an object to rotate Select an object to rotate - - Pick rotation center: - Pick rotation center: - - - - Pick base angle: - Pick base angle: - - - - Pick rotation angle: - Pick rotation angle: - - - + Select an object to offset Select an object to offset - + Offset only works on one object at a time Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported Sorry, offset of Bezier curves is currently still not supported - - Pick distance: - Pick distance: - - - + Select an object to stretch Select an object to stretch - - Pick first point of selection rectangle: - Pick first point of selection rectangle: - - - - Pick opposite point of selection rectangle: - Pick opposite point of selection rectangle: - - - - Pick start point of displacement: - Pick start point of displacement: - - - - Pick end point of displacement: - Pick end point of displacement: - - - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Select an object to join Select an object to join - + Join Join - + Select an object to split Select an object to split - + Select an object to upgrade Select an object to upgrade - + Select object(s) to trim/extend Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect These objects don't intersect - + Too many intersection points Too many intersection points - + Select an object to scale Select an object to scale - - Pick base point: - Pick base point: - - - - Pick reference distance from base point: - Pick reference distance from base point: - - - - Pick new distance from base point: - Pick new distance from base point: - - - + Select an object to project Select an object to project - - This object type is not editable - This object type is not editable - - - + Please select only one object Please select only one object - + Select a Draft object to edit Select a Draft object to edit - + Active object must have more than two points/nodes Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Please select base and pointlist objects Please select base and pointlist objects - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) - + Select an object to mirror Select an object to mirror - - Pick start point of mirror line: - Pick start point of mirror line: - - - - Pick end point of mirror line: - Pick end point of mirror line: - - - + This tool only works with Wires and Lines This tool only works with Wires and Lines - - - Pick target point: - Pick target point: - - - - Pick endpoint of leader line: - Pick endpoint of leader line: - - - - Pick text position: - Pick text position: - ODA (formerly Teigha) File Converter not found, DWG support is disabled ODA (formerly Teigha) File Converter not found, DWG support is disabled - + %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. @@ -4312,56 +4305,354 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Subelement mode - + Toggle radius and angles arc editing Toggle radius and angles arc editing - + Modify subelements Modify subelements - + If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects - + CubicBezCurve CubicBezCurve - - Click and drag to define next knot: - - Click and drag to define next knot: - - - - - Click and drag to define next knot: ESC to Finish or close (o): - Click and drag to define next knot: ESC to Finish or close (o): - - - + Some subelements could not be moved. Some subelements could not be moved. - + Scale 縮放 - + Some subelements could not be scaled. Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + 上 + + + + Front + 前視圖 + + + + Side + Side + + + + Current working plane + Current working plane + + + + No edit point found for selected object + No edit point found for selected object + + + + This object is not editable + This object is not editable + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Select a face or working plane proxy or 3 vertices, or choose one of the options below + Select a face or working plane proxy or 3 vertices, or choose one of the options below + + + + Sets the working plane on the ground XY plane + Sets the working plane on the ground XY plane + + + + Sets the working plane on the front XZ plane + Sets the working plane on the front XZ plane + + + + Sets the working plane on the side YZ plane + Sets the working plane on the side YZ plane + + + + Sets the working plane perpendicular to the current view + Sets the working plane perpendicular to the current view + + + + Automatic + Automatic + + + + The working plane adapts to the current view when a command is started + The working plane adapts to the current view when a command is started + + + + Centers the working plane on the current view + Centers the working plane on the current view + + + + Snapping radius + Snapping radius + + + + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + This is the distance in screen pixels under which a point will be snapped. You can also change the radius while drawing, using keys + + + + Working plane setup + Working plane setup + + + + No active document. Aborting + No active document. Aborting + + + + Layer + Layer + + + + Layers + Layers + + + + Pick first point + Pick first point + + + + Pick next point + Pick next point + + + + Polyline + Polyline + + + + Pick next point, or Finish (shift-F) or close (o) + Pick next point, or Finish (shift-F) or close (o) + + + + Click and drag to define next knot + Click and drag to define next knot + + + + Click and drag to define next knot: ESC to Finish or close (o) + Click and drag to define next knot: ESC to Finish or close (o) + + + + Pick opposite point + Pick opposite point + + + + Pick center point + Pick center point + + + + Pick radius + Pick radius + + + + Pick start angle + Pick start angle + + + + Pick aperture + Pick aperture + + + + Pick aperture angle + Pick aperture angle + + + + Pick location point + Pick location point + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Pick start point + Pick start point + + + + Pick end point + Pick end point + + + + Pick rotation center + Pick rotation center + + + + Base angle + Base angle + + + + Pick base angle + Pick base angle + + + + Rotation + Rotation + + + + Pick rotation angle + Pick rotation angle + + + + Cannot offset this object type + Cannot offset this object type + + + + Pick distance + Pick distance + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + Pick new distance from base point + Pick new distance from base point + + + + Select an object to edit + Select an object to edit + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Pick target point + Pick target point + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + Pick text position + Pick text position + + + + Draft + 吃水 + + + + The Draft module is used for basic 2D CAD Drafting + The Draft module is used for basic 2D CAD Drafting + + + + Utilities + 功能 + + + + Wire tools + 線條工具 + + + + Snapping + 對齊 + diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm index d974f57bec..88b6b77267 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts index 1714e2fa94..84445787b4 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts @@ -574,7 +574,7 @@ Szeretné folytatni? Visible outline edges - Élek látható körvonala + Látható körvonal élek @@ -599,7 +599,7 @@ Szeretné folytatni? Hidden outline edges - Rejtett szerkezeti élek + Rejtett vázlat élek diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm index c85f573c2e..9a48683a8a 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.ts index cfcb4a84ae..2457924f01 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.ts @@ -194,7 +194,7 @@ Project shape onto a user-defined plane - Projektuoti kūno atvaizdą į pasirinktą plokštumą + Projektuoti daikto atvaizdą į pasirinktą plokštumą diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm index 838e093b8a..440981e5bd 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.ts index eaa3505c8b..feffc71a3c 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.ts @@ -508,7 +508,7 @@ Do you want to continue? View projection - View projection + Projecció de la vista diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm index 2029dd69b1..617ed21096 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts index c7204745c6..25f5b8a9d4 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Skep 'n FEM vergelyking vir fluxsolver - - - Creates a FEM equation for fluxsolver - Skep 'n FEM vergelyking vir fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Omskep die oppervlak van 'n FEM maas na 'n maas - - - Convert the surface of a FEM mesh to a mesh - Omskep die oppervlak van 'n FEM maas na 'n maas - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Skep 'n Nielineêre meganiese materiaal - + Creates a nonlinear mechanical material Skep 'n Nielineêre meganiese materiaal + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM maas vanaf vorm deur Netgen + + + + FEM mesh from shape by Netgen + FEM maas vanaf vorm deur Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Verwyder - - - Add - Voeg by - Remove Verwyder - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm index 1c93304d88..c73f20f00e 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts index 8582b6c727..9dd91a480f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ يقوم بإنشاء مادة ميكانيكية غير خطية - + Creates a nonlinear mechanical material يقوم بإنشاء مادة ميكانيكية غير خطية + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove إزالة - - - Add - إضافة - Remove إزالة - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm index 69ed60baf1..96b4848cd5 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index eb69d41f8f..013e49db8a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Crea una equació FEM per fluxsolver - - - Creates a FEM equation for fluxsolver - Crea una equació FEM per fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Converteix la superfície de malla MEF en malla - - - Convert the surface of a FEM mesh to a mesh - Converteix la superfície de malla MEF en malla - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Crea material mecànic no lineal - + Creates a nonlinear mechanical material Crea material mecànic no lineal + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Crea un grup de malla MEF + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Crea un grup de malla MEF + + FEM mesh from shape by Netgen + Malla MEF de la forma per Netgen + + + + FEM mesh from shape by Netgen + Malla MEF de la forma per Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Crea un solucionador FEM CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solucionador CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Crea un solucionador FEM CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solucionador del CalculiX + + + + Creates a FEM solver CalculiX + Crea un solucionador MEF basat en CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Canvia els atributs del solucionador i executa els càlculs per al solucionador seleccionat + + + FEM_SolverElmer - - Solver job control - Control de treball del solucionador + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Canvia els atributs del solucionador i executa els càlculs per al solucionador seleccionat + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Elimina - - - Add - Afig - Remove Elimina - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solucionador del CalculiX - - - - Creates a FEM solver CalculiX - Crea un solucionador MEF basat en CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm index 8c7e49ce93..94bce8e6d7 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index d3bc63a678..8bc326c7b9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Vytvoří MKP rovnici pro řešič tepelného toku - - - Creates a FEM equation for fluxsolver - Vytvoří MKP rovnici pro řešič tepelného toku - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Převést povrch MKP sítě na síť - - - Convert the surface of a FEM mesh to a mesh - Převést povrch MKP sítě na síť - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Vytvoří nelineární mechanický materiál - + Creates a nonlinear mechanical material Vytvoří nelineární mechanický materiál + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Zobrazit informace o MKP síti - - - Display FEM mesh info - Zobrazit informace o MKP síti - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Vytvoří skupinu MKP sítě + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Vytvoří skupinu MKP sítě + + FEM mesh from shape by Netgen + MKP síť z tvaru pomocí Netgenu + + + + FEM mesh from shape by Netgen + MKP síť z tvaru pomocí Netgenu @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Vytvoří MKP řešič CalculiX (experimentální) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Řešič CalculiX (experimentální) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Vytvoří MKP řešič CalculiX (experimentální) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Řešič CalculiX + + + + Creates a FEM solver CalculiX + Vytvoří MKP řešič CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Změní atributy řešiče a spustí výpočty pro vybraný řešič + + + FEM_SolverElmer - - Solver job control - Správa práce řešiče + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Změní atributy řešiče a spustí výpočty pro vybraný řešič + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Odstranit - - - Add - Přidat - Remove Odstranit - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Řešič CalculiX - - - - Creates a FEM solver CalculiX - Vytvoří MKP řešič CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm index b4a01b8773..91820bb2f9 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 3e79cb82b3..8b03ad96eb 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -114,12 +114,12 @@ Constraint electrostatic potential - Randbedingung elektrostatisches Potential + Elektrostatisches Potential Creates a FEM constraint electrostatic potential - FEM-Bedingung für elektrostatisches Potential erstellen + Elektrostatisches Potential erstellen @@ -127,7 +127,7 @@ Constraint flow velocity - Randbedingung Fluss Geschwindigkeit + Fließgeschwindigkeit @@ -140,12 +140,12 @@ Constraint initial flow velocity - Randbedingung Anfangs Fluss Geschwindigkeit + Anfangsfließgeschwindigkeit Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Anfangsfließgeschwindigkeit festlegen @@ -153,12 +153,12 @@ Constraint self weight - Einschränkung Eigengewicht + Eigengewicht Creates a FEM constraint self weight - Erstellt ein FEM-Einschränkungsgewicht + Eigengewicht hinzufügen @@ -166,12 +166,12 @@ Fluid section for 1D flow - Flüssigkeitsteil für 1D-Druchfluss + Fluid-Abschnitt für 1D-Fluß Creates a FEM Fluid section for 1D flow - Erzeugt einen FEM-Flüssigkeitsabschnitt für 1D-Durchfluss + Erzeugt einen Fluidbereich für 1D-Durchfluß @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver FEM-Gleichung für Strömungen erstellen - - - Creates a FEM equation for fluxsolver - FEM-Gleichung für Strömungen erstellen - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Wärmefluß-Solver + + + + Fluxsolver heat + Wärmefluß-Solver @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Wandelt die Oberfläche eines FEM-Netzes in ein Netz um - - - Convert the surface of a FEM mesh to a mesh - Wandelt die Oberfläche eines FEM-Netzes in ein Netz um - FEM_MaterialFluid Material for fluid - Material for fluid + Material für Flüssigkeit + + + + Material for fluid + Material für Flüssigkeit @@ -327,17 +327,30 @@ Erzeugt ein nichtlineares mechanisches Material - + Creates a nonlinear mechanical material Erzeugt ein nichtlineares mechanisches Material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Material für Festkörper + + + + Material for solid + Material für Festkörper @@ -378,23 +391,18 @@ Display FEM mesh info Informationen zum FEM-Netz anzeigen - - - Display FEM mesh info - Informationen zum FEM-Netz anzeigen - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + FEM-Netz erstellen (Gmsh) Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + FEM-Netz mit Gmsh-Vernetzer erstellen @@ -419,10 +427,18 @@ Creates a FEM mesh group Erstellt eine FEM-Netz-Gruppe + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Erstellt eine FEM-Netz-Gruppe + + FEM mesh from shape by Netgen + FEM-Netz von Form von Netgen + + + + FEM mesh from shape by Netgen + FEM-Netz von Form von Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Erzeugt ein FEM-Solver CalculiX (experimentell) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimentell) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Erzeugt ein FEM-Solver CalculiX (experimentell) + + Creates a standard FEM solver CalculiX with ccx tools + CalculiX-Solver erstellen + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Erstellt einen FEM-Solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Ändert Solver-Attribute und führt die Berechnungen für den ausgewählten Solver aus + + + FEM_SolverElmer - - Solver job control - Solver-Auftragssteuerung + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Ändert Solver-Attribute und führt die Berechnungen für den ausgewählten Solver aus + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Entfernen - - - Add - Hinzufügen - Remove Entfernen - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Erstellt einen FEM-Solver CalculiX - - FEM_MeshFromShape @@ -683,12 +692,12 @@ Fluid section for 1D flow - Flüssigkeitsteil für 1D-Druchfluss + Fluid-Abschnitt für 1D-Fluß Creates a FEM Fluid section for 1D flow - Erzeugt einen FEM-Flüssigkeitsabschnitt für 1D-Durchfluss + Erzeugt einen Fluidbereich für 1D-Durchfluß @@ -724,7 +733,7 @@ Create a new mechanical analysis - Erstellen einer neuen mechanischen Analyse + Neue mechanischen Analyse erstellen @@ -768,12 +777,12 @@ Constraint self weigt - Einschränkung Eigengewicht + Eigengewicht Creates a FEM constraint self weigt - Erstellt ein FEM-Einschränkungsgewicht + Eigengewicht hinzufügen @@ -825,12 +834,12 @@ Mechanical material... - Mechanisches Material... + Festkörpermaterial... Creates a mechanical material - Erstellt ein mechanisches Material + Festkörpermaterial erstellen @@ -1016,7 +1025,7 @@ Create a new mechanical analysis - Erstellen einer neuen mechanischen Analyse + Neue mechanischen Analyse erstellen @@ -1024,12 +1033,12 @@ Run CalculiX ccx - CalculiX Ccx ausführen + CalculiX ausführen Write .inp file and run CalculiX ccx - .inp-Datei erstellen und CalculiX ccx starten + .inp-Datei erstellen und CalculiX starten @@ -1063,7 +1072,7 @@ Mechanical material... - Mechanisches Material... + Festkörpermaterial... @@ -1126,7 +1135,7 @@ Create FEM displacement constraint - FEM-Verschiebungsrandbedingung erstellen + Verschiebung erstellen @@ -1361,12 +1370,12 @@ High frequency limit - Hochfrequenz-Limit + Höchste Frequenz Low frequency limit - Niederfrequenz-Limit + Niedrigste Frequenz @@ -1786,7 +1795,7 @@ Use FreeCAD Property Editor - FreeCAD-Eigenschaften-Editor verwenden + FreeCAD-Eigenschaftseditor verwenden diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm index 02a4939c3a..56f2343ac6 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 959daacb6d..5753aafb97 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Δημιουργεί μια εξίσωση FEM για τον επιλυτή ροής - - - Creates a FEM equation for fluxsolver - Δημιουργεί μια εξίσωση FEM για τον επιλυτή ροής - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Μετατρέψτε την επιφάνεια ενός πλέγματος FEM σε πλέγμα - - - Convert the surface of a FEM mesh to a mesh - Μετατρέψτε την επιφάνεια ενός πλέγματος FEM σε πλέγμα - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Δημιουργεί ένα μη γραμμικό μηχανικό υλικό - + Creates a nonlinear mechanical material Δημιουργεί ένα μη γραμμικό μηχανικό υλικό + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Δημιουργεί μια ομάδα πλεγμάτων FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Δημιουργεί μια ομάδα πλεγμάτων FEM + + FEM mesh from shape by Netgen + Πλέγμα FEM από σχήμα με τη χρήση Netgen + + + + FEM mesh from shape by Netgen + Πλέγμα FEM από σχήμα με τη χρήση Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Δημιουργεί έναν επιλυτή CalculiX FEM (πειραματικός) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Επιλυτής CalculiX (πειραματικός) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Δημιουργεί έναν επιλυτή CalculiX FEM (πειραματικός) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Επιλυτής Calculix + + + + Creates a FEM solver CalculiX + Δημιουργεί έναν επιλυτή CalculiX FEM @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Αλλάζει τα χαρακτηριστικά του επιλυτή και εκτελεί τους υπολογισμούς για τον επιλεγμένο επιλυτή + + + FEM_SolverElmer - - Solver job control - Έλεγχος εργασίας επιλυτή + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Αλλάζει τα χαρακτηριστικά του επιλυτή και εκτελεί τους υπολογισμούς για τον επιλεγμένο επιλυτή + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Αφαίρεση - - - Add - Προσθήκη - Remove Αφαίρεση - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Επιλυτής Calculix - - - - Creates a FEM solver CalculiX - Δημιουργεί έναν επιλυτή CalculiX FEM - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm index ba8eb22ffa..648c107648 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 5160d20c50..ad7143ed5d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Crea una restricción FEM de velocidad inicial de flujo @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Crea una ecuación FEM para fluxsolver - - - Creates a FEM equation for fluxsolver - Crea una ecuación FEM para fluxsolver - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Fluxsolver calor + + + + Fluxsolver heat + Fluxsolver calor @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Convertir la superficie de una malla FEM en una malla - - - Convert the surface of a FEM mesh to a mesh - Convertir la superficie de una malla FEM en una malla - FEM_MaterialFluid Material for fluid - Material for fluid + Material para fluído + + + + Material for fluid + Material para fluído @@ -327,17 +327,30 @@ Crea un material mecánico no lineal - + Creates a nonlinear mechanical material Crea un material mecánico no lineal + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Material para sólido + + + + Material for solid + Material para sólido @@ -378,23 +391,18 @@ Display FEM mesh info Mostrar la información de la malla FEM - - - Display FEM mesh info - Mostrar la información de la malla FEM - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Malla FEM desde forma por Gmsh Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Crear una malla FEM de una forma por el mallador Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Crear un grupo de malla FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Crear un grupo de malla FEM + + FEM mesh from shape by Netgen + Mallado FEM de la figura por Netgen + + + + FEM mesh from shape by Netgen + Mallado FEM de la figura por Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Crea un Solver FEM de Calculix (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Calculix Solver (experimental) + + Solver CalculiX Standard + Solver CalculiX estándar - - Creates a FEM solver CalculiX (experimental) - Crea un Solver FEM de Calculix (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Crea una estándar CalculiX solver de FEM con herramientas ccx + + + + Solver CalculiX + CalculiX Solver + + + + Creates a FEM solver CalculiX + Crea un solver FEM CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Cambia atributos del solucionador y ejecuta los cálculos + + + FEM_SolverElmer - - Solver job control - Control de trabajo del solucionador + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Cambia atributos del solucionador y ejecuta los cálculos + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Quitar - - - Add - Añadir - Remove Quitar - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - CalculiX Solver - - - - Creates a FEM solver CalculiX - Crea un solver FEM CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm index 82aae3e410..8f8a25404e 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 76c9d4efb7..d4cc762ed4 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Hasierako fluxu-abiaduraren FEM murrizketa bat sortzen du @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver FEM ekuazio bat sortzen du fluxua ebazteko - - - Creates a FEM equation for fluxsolver - FEM ekuazio bat sortzen du fluxua ebazteko - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Fluxua ebaztearen beroa + + + + Fluxsolver heat + Fluxua ebaztearen beroa @@ -288,12 +288,7 @@ Convert the surface of a FEM mesh to a mesh - Bihurtu sare FEM sare baten azalera - - - - Convert the surface of a FEM mesh to a mesh - Bihurtu sare FEM sare baten azalera + Bihurtu sare FEM sare baten gainazala @@ -301,7 +296,12 @@ Material for fluid - Material for fluid + Materiala jariakinerako + + + + Material for fluid + Materiala jariakinerako @@ -327,17 +327,30 @@ Material mekaniko ez-lineal bat sortzen du - + Creates a nonlinear mechanical material Material mekaniko ez-lineal bat sortzen du + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Materiala solidorako + + + + Material for solid + Materiala solidorako @@ -378,23 +391,18 @@ Display FEM mesh info Bistaratu FEM sarearen informazioa - - - Display FEM mesh info - Bistaratu FEM sarearen informazioa - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + FEM sarea formatik, Gmsh bidez Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Sortu FEM sare bat forma batetik abiatuz, Gmsh sare-sortzailea erabiliz @@ -419,10 +427,18 @@ Creates a FEM mesh group FEM sare-talde bat sortzen du + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - FEM sare-talde bat sortzen du + + FEM mesh from shape by Netgen + FEM sarea formatik, Netgen bidez + + + + FEM mesh from shape by Netgen + FEM sarea formatik, Netgen bidez @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) FEM CalculiX ebazle bat sortzen du (esperimentala) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - CalculiX ebazlea (esperimentala) + + Solver CalculiX Standard + CalculiX ebazle estandarra - - Creates a FEM solver CalculiX (experimental) - FEM CalculiX ebazle bat sortzen du (esperimentala) + + Creates a standard FEM solver CalculiX with ccx tools + FEM CalculiX ebazle estandarra sortzen du ccx tresnekin + + + + Solver CalculiX + CalculiX ebazlea + + + + Creates a FEM solver CalculiX + FEM CalculiX ebazlea sortzen du @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Ebazlearen atributuak aldatzen ditu eta hautatutako ebazlerako kalkuluak exekutatzen ditu + + + FEM_SolverElmer - - Solver job control - Ebazle-lanaren kontrola + + Solver Elmer + Elmer ebazlea - - Changes solver attributes and runs the calculations for the selected solver - Ebazlearen atributuak aldatzen ditu eta hautatutako ebazlerako kalkuluak exekutatzen ditu + + Solver Elmer + Elmer ebazlea @@ -615,35 +647,12 @@ Remove Kendu - - - Add - Gehitu - Remove Kendu - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - CalculiX ebazlea - - - - Creates a FEM solver CalculiX - FEM CalculiX ebazlea sortzen du - - FEM_MeshFromShape @@ -799,7 +808,7 @@ Convert the surface of a FEM mesh to a mesh - Bihurtu sare FEM sare baten azalera + Bihurtu sare FEM sare baten gainazala @@ -2163,7 +2172,7 @@ Surface - Azalera + Gainazala diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm index 660fb4aae4..1910e6e064 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 48f3b8a31f..b1838da8c7 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creates a nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Poista - - - Add - Lisää - Remove Poista - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm index d3ca6e7c7b..5b90415364 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts index 7b0e177378..d34ef366cf 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Lumilikha ng FEM na ekwasyon para sa fluxsolver - - - Creates a FEM equation for fluxsolver - Lumilikha ng FEM na ekwasyon para sa fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Baguhin ang ibabaw ng FEM na mata sa isang mata - - - Convert the surface of a FEM mesh to a mesh - Baguhin ang ibabaw ng FEM na mata sa isang mata - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Lumilikha ng mga hindi tuwid na mekanikal na materyales - + Creates a nonlinear mechanical material Lumilikha ng mga hindi tuwid na mekanikal na materyales + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Lumilkha ng mga grupo ng FEM mesh + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Lumilkha ng mga grupo ng FEM mesh + + FEM mesh from shape by Netgen + Ang FEM mesh mula sa mga hugis ng Netgen + + + + FEM mesh from shape by Netgen + Ang FEM mesh mula sa mga hugis ng Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Lumilikha ng FEM na tagalutas na CalculiX (pagsusubok) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Tagalutas na CalculiX (pagsusubok) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Lumilikha ng FEM na tagalutas na CalculiX (pagsusubok) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver Calculix + + + + Creates a FEM solver CalculiX + Lumilikha ng taga resulba ng CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Nagbabago sa mga katangian ng tagalutas at nagpapatakbo sa mga kalkulasyon sa pangalawang napiling tagalutas + + + FEM_SolverElmer - - Solver job control - Pagkontrola ng trabaho ng tagalutas + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Nagbabago sa mga katangian ng tagalutas at nagpapatakbo sa mga kalkulasyon sa pangalawang napiling tagalutas + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Ihiwalay - - - Add - Magdugtong - Remove Ihiwalay - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver Calculix - - - - Creates a FEM solver CalculiX - Lumilikha ng taga resulba ng CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm index 02029e43fd..1199016e2b 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 763d0195e8..98ed127c64 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Créer une contrainte FEM vitesse initial d'écoulement @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Créer une équation de solveur de flux - - - Creates a FEM equation for fluxsolver - Créer une équation de solveur de flux - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Fluxsolver chaleur + + + + Fluxsolver heat + Fluxsolver chaleur @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Convertir la surface d'un maillage MEF en maillage - - - Convert the surface of a FEM mesh to a mesh - Convertir la surface d'un maillage MEF en maillage - FEM_MaterialFluid Material for fluid - Material for fluid + Matériau pour le fluide + + + + Material for fluid + Matériau pour le fluide @@ -327,17 +327,30 @@ Créer un matériau à mécanique non linéaire - + Creates a nonlinear mechanical material Créer un matériau à mécanique non linéaire + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Matériau pour le solide + + + + Material for solid + Matériau pour le solide @@ -378,23 +391,18 @@ Display FEM mesh info Afficher info maille MEF - - - Display FEM mesh info - Afficher info maille MEF - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Maillage FEM à partir d'une forme avec Gmsh Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Créer un maillage FEM à partir d'une forme avec le mailleur Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Créer un groupe de type maillage FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Créer un groupe de type maillage FEM + + FEM mesh from shape by Netgen + Maillage FEM à partir d'une forme avec Netgen + + + + FEM mesh from shape by Netgen + Maillage FEM à partir d'une forme avec Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Créer un solveur FEM CalculiX (expérimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solveur CalculiX (expérimental) + + Solver CalculiX Standard + Solveur CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Créer un solveur FEM CalculiX (expérimental) + + Creates a standard FEM solver CalculiX with ccx tools + Crée un solveur FEM standard CalculiX avec les outils ccx + + + + Solver CalculiX + Solveur CalculiX + + + + Creates a FEM solver CalculiX + Créer un solver FEM CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Modifier les attributs du solveur et lancer les calculs pour le solveur sélectionné + + + FEM_SolverElmer - - Solver job control - Contrôle de tâches du solveur + + Solver Elmer + Solveur Elmer - - Changes solver attributes and runs the calculations for the selected solver - Modifier les attributs du solveur et lancer les calculs pour le solveur sélectionné + + Solver Elmer + Solveur Elmer @@ -615,35 +647,12 @@ Remove Enlever - - - Add - Ajouter - Remove Enlever - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solveur CalculiX - - - - Creates a FEM solver CalculiX - Créer un solver FEM CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm index bc753c50d7..467457cae8 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 296f9f803b..483a2cfde5 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Crea unha constrición MEF inicial da velocidade do fluído @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Crea unha ecuación MEF para fluxsolver - - - Creates a FEM equation for fluxsolver - Crea unha ecuación MEF para fluxsolver - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Calor Fluxsolver + + + + Fluxsolver heat + Calor Fluxsolver @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Converte a superficie dunha malla FEM nunha malla - - - Convert the surface of a FEM mesh to a mesh - Converte a superficie dunha malla FEM nunha malla - FEM_MaterialFluid Material for fluid - Material for fluid + Material para fluído + + + + Material for fluid + Material para fluído @@ -327,17 +327,30 @@ Crea un material mecánico non linear - + Creates a nonlinear mechanical material Crea un material mecánico non linear + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Material para sólido + + + + Material for solid + Material para sólido @@ -378,23 +391,18 @@ Display FEM mesh info Amosar info da malla FEM - - - Display FEM mesh info - Amosar info da malla FEM - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Malla MEF dende forma Gmsh Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Crea unha malla MEF dunha forma por medio do xerador de malla Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Crear un grupo de malla FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Crear un grupo de malla FEM + + FEM mesh from shape by Netgen + Malla FEM dunha Forma por Netgen + + + + FEM mesh from shape by Netgen + Malla FEM dunha Forma por Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Crea un resolvedor MEF CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Resolvedor CalculiX (experimental) + + Solver CalculiX Standard + Resolvedor CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Crea un resolvedor MEF CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Crea un standard resolvedor MEF CalculiX con ferramentas ccx + + + + Solver CalculiX + Resolvedor CalculiX + + + + Creates a FEM solver CalculiX + Crea un resolvedor CalculiX para o FEM @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Troca os atributos do resolvedor e executa os cálculos para o resolvedor escolmado + + + FEM_SolverElmer - - Solver job control - Control de traballo do resolvedor + + Solver Elmer + Resolvedor Elmer - - Changes solver attributes and runs the calculations for the selected solver - Troca os atributos do resolvedor e executa os cálculos para o resolvedor escolmado + + Solver Elmer + Resolvedor Elmer @@ -615,35 +647,12 @@ Remove Rexeitar - - - Add - Engadir - Remove Rexeitar - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Resolvedor CalculiX - - - - Creates a FEM solver CalculiX - Crea un resolvedor CalculiX para o FEM - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm index e612e7cd16..7390663a2e 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index a74612db46..0f7ae7388d 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Stvara FEM jednadžbu za protok - - - Creates a FEM equation for fluxsolver - Stvara FEM jednadžbu za protok - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Pretvoriti površinu FEM mreže u mrežu - - - Convert the surface of a FEM mesh to a mesh - Pretvoriti površinu FEM mreže u mrežu - FEM_MaterialFluid Material for fluid - Material for fluid + Materijal za tekućinu + + + + Material for fluid + Materijal za tekućinu @@ -327,17 +327,30 @@ Stvaranje nelinearnih mehaničkih materijala - + Creates a nonlinear mechanical material Stvaranje nelinearnih mehaničkih materijala + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Materijal za kruto tijelo + + + + Material for solid + Materijal za kruto tijelo @@ -378,11 +391,6 @@ Display FEM mesh info Prikaz informacija o FEM mreži - - - Display FEM mesh info - Prikaz informacija o FEM mreži - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Stvara grupu FEM mreže + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Stvara grupu FEM mreže + + FEM mesh from shape by Netgen + FEM mreža od Netgen forme + + + + FEM mesh from shape by Netgen + FEM mreža od Netgen forme @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Stvara FEM rješavača CalculiX (eksperimentalno) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Alat za rješavanje CalculiX (eksperimentalno) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Stvara FEM rješavača CalculiX (eksperimentalno) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Alat za rješavanje CalculiX + + + + Creates a FEM solver CalculiX + Stvara FEM rješavača CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Mijenja atribute rješavača i izvodi izračune za odabrani alat za rješavanje + + + FEM_SolverElmer - - Solver job control - Kontrola posla rješavača + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Mijenja atribute rješavača i izvodi izračune za odabrani alat za rješavanje + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Ukloniti - - - Add - Dodaj - Remove Ukloniti - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Alat za rješavanje CalculiX - - - - Creates a FEM solver CalculiX - Stvara FEM rješavača CalculiX - - FEM_MeshFromShape @@ -2038,13 +2047,13 @@ Constraint force - Constraint force + Sila ograničenja Constraint normal stress - Constraint normal stress + Ograničenje normalnog naprezanja @@ -2092,12 +2101,12 @@ Abs displacement - Abs displacement + Apsolutno premještanje Avg: - Avg: + Prosj.: @@ -2140,7 +2149,7 @@ Meshes: - Meshes: + Mreže: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm index 578a936b39..8548f5852d 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 437d7500f9..cada5e099a 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Létrehoz egy véges-elemes módszerű kezdeti áramlási sebesség kényszerítést @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Létrehoz egy végeselemes módszerű Flux megoldó egyenletet - - - Creates a FEM equation for fluxsolver - Létrehoz egy végeselemes módszerű Flux megoldó egyenletet - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Fluxmegoldó hő + + + + Fluxsolver heat + Fluxmegoldó hő @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Egy VEM háló felületet átalakítja egy hálóvá - - - Convert the surface of a FEM mesh to a mesh - Egy VEM háló felületet átalakítja egy hálóvá - FEM_MaterialFluid Material for fluid - Material for fluid + Folyadék anyaga + + + + Material for fluid + Folyadék anyaga @@ -327,17 +327,30 @@ Létrehoz egy nemlineáris mechanikus anyagot - + Creates a nonlinear mechanical material Létrehoz egy nemlineáris mechanikus anyagot + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Szilárd test anyaga + + + + Material for solid + Szilárd test anyaga @@ -378,23 +391,18 @@ Display FEM mesh info FEM-háló adatainak megjelenítése - - - Display FEM mesh info - FEM-háló adatainak megjelenítése - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + VEM-háló az GMSH alakzat által Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Egy VEM-háló létrehozása egy GMSH hálózó alakzatából @@ -419,10 +427,18 @@ Creates a FEM mesh group Egy VEM-háló csoportot hoz létre + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Egy VEM-háló csoportot hoz létre + + FEM mesh from shape by Netgen + VEM-háló alakzat Netgen által + + + + FEM mesh from shape by Netgen + VEM-háló alakzat Netgen által @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Létrehoz egy VEM megoldó CalculiiX (kísérleti) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - CalculiX megoldó (kísérleti) + + Solver CalculiX Standard + CalculiX alapértelmezett megoldó - - Creates a FEM solver CalculiX (experimental) - Létrehoz egy VEM megoldó CalculiiX (kísérleti) + + Creates a standard FEM solver CalculiX with ccx tools + Létrehoz egy normál CalculiX VEM megoldót ccx eszközzel + + + + Solver CalculiX + CalculiX megoldó + + + + Creates a FEM solver CalculiX + Létrehoz egy VEM CalculiX megoldót @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Megoldó attribútumainak módosítása és a kiválasztott megoldó számításainak elindítása + + + FEM_SolverElmer - - Solver job control - Munka megoldó ellenőrzés + + Solver Elmer + Elmer megoldó - - Changes solver attributes and runs the calculations for the selected solver - Megoldó attribútumainak módosítása és a kiválasztott megoldó számításainak elindítása + + Solver Elmer + Elmer megoldó @@ -615,35 +647,12 @@ Remove Törlés - - - Add - Hozzáad - Remove Törlés - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - CalculiX megoldó - - - - Creates a FEM solver CalculiX - Létrehoz egy VEM CalculiX megoldót - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm index 87337b84bf..f36bb162bd 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index 8a67d059b1..07d74ee27d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Mengkonversi permukaan mesh FEM ke mesh - - - Convert the surface of a FEM mesh to a mesh - Mengkonversi permukaan mesh FEM ke mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Membuat bahan mekanik non linier - + Creates a nonlinear mechanical material Membuat bahan mekanik non linier + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Membuat kelompok mesh FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Membuat kelompok mesh FEM + + FEM mesh from shape by Netgen + FEM mesh dari bentuk oleh Netgen + + + + FEM mesh from shape by Netgen + FEM mesh dari bentuk oleh Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Membuat FEM pemecah CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Mengubah atribut pemecah dan menjalankan penghitungan untuk pemecah yang dipilih + + + FEM_SolverElmer - - Solver job control - Kontrol pekerjaan memecah + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Mengubah atribut pemecah dan menjalankan penghitungan untuk pemecah yang dipilih + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Menghapus - - - Add - Menambahkan - Remove Menghapus - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Membuat FEM pemecah CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm index 0553a61a21..1973f018fb 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 6e658ad958..b65625185a 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Crea un vincolo FEM Velocità di flusso iniziale @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Crea un'equazione FEM per fluxsolver - - - Creates a FEM equation for fluxsolver - Crea un'equazione FEM per fluxsolver - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Risolutore del flusso di calore + + + + Fluxsolver heat + Risolutore del flusso di calore @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Converte la superficie di una mesh FEM in una mesh - - - Convert the surface of a FEM mesh to a mesh - Converte la superficie di una mesh FEM in una mesh - FEM_MaterialFluid Material for fluid - Material for fluid + Materiale per fluido + + + + Material for fluid + Materiale per fluido @@ -327,17 +327,30 @@ Crea un materiale meccanico non lineare - + Creates a nonlinear mechanical material Crea un materiale meccanico non lineare + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Materiale per solido + + + + Material for solid + Materiale per solido @@ -378,23 +391,18 @@ Display FEM mesh info Visualizza le informazioni di mesh FEM - - - Display FEM mesh info - Visualizza le informazioni di mesh FEM - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Mesh FEM da forma con Gmsh Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Crea una mesh FEM da una forma con il mesher Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Crea un gruppo di mesh FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Crea un gruppo di mesh FEM + + FEM mesh from shape by Netgen + Mesh FEM da forma con Netgen + + + + FEM mesh from shape by Netgen + Mesh FEM da forma con Netgen @@ -443,7 +459,7 @@ Show result - Mostra risultato + Mostra i risultati @@ -456,7 +472,7 @@ Purge results - Azzera risultati + Azzera i risultati @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Crea un solutore FEM CalculiX (sperimentale) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Risolutore CalculiX (sperimentale) + + Solver CalculiX Standard + Risolutore CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Crea un solutore FEM CalculiX (sperimentale) + + Creates a standard FEM solver CalculiX with ccx tools + Crea un solutore standard CalculiX per FEM con strumenti ccx + + + + Solver CalculiX + Risolutore CalculiX + + + + Creates a FEM solver CalculiX + Crea un solutore FEM basato su CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Cambia gli attributi di solutore ed esegue i calcoli per il solutore selezionato + + + FEM_SolverElmer - - Solver job control - Imposta il risolutore + + Solver Elmer + Risolutore Elmer - - Changes solver attributes and runs the calculations for the selected solver - Cambia gli attributi di solutore ed esegue i calcoli per il solutore selezionato + + Solver Elmer + Risolutore Elmer @@ -615,35 +647,12 @@ Remove Rimuovi - - - Add - Aggiungi - Remove Rimuovi - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Risolutore CalculiX - - - - Creates a FEM solver CalculiX - Crea un solutore FEM basato su CalculiX - - FEM_MeshFromShape @@ -890,7 +899,7 @@ Purge results - Azzera risultati + Azzera i risultati @@ -944,7 +953,7 @@ Show result - Mostra risultato + Mostra i risultati @@ -1076,7 +1085,7 @@ Show result - Mostra risultato + Mostra i risultati @@ -1923,7 +1932,7 @@ Properties - Propietà + Proprietà @@ -2057,7 +2066,7 @@ Show result - Mostra risultato + Mostra i risultati diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm index d35bacf5c8..25c4699c98 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 84960532da..47b92b01fc 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + FEM 拘束の初期流速を作成します @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver FluxsolverのためのFEM方程式を作成 - - - Creates a FEM equation for fluxsolver - FluxsolverのためのFEM方程式を作成 - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + フラックスソルバー ヒート + + + + Fluxsolver heat + フラックスソルバー ヒート @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh FEMメッシュの表面をメッシュに変換 - - - Convert the surface of a FEM mesh to a mesh - FEMメッシュの表面をメッシュに変換 - FEM_MaterialFluid Material for fluid - Material for fluid + 流体のためのマテリアル + + + + Material for fluid + 流体のためのマテリアル @@ -327,17 +327,30 @@ 非線形機械材料を作成 - + Creates a nonlinear mechanical material 非線形機械材料を作成 + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + 個体のためのマテリアル + + + + Material for solid + 個体のためのマテリアル @@ -378,23 +391,18 @@ Display FEM mesh info FEMメッシュ情報を表示 - - - Display FEM mesh info - FEMメッシュ情報を表示 - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Gmshによる形状からのFEMメッシュ Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Gmshメッシャーを使用して形状からFEMメッシュを作成 @@ -419,10 +427,18 @@ Creates a FEM mesh group FEMメッシュグループを作成 + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - FEMメッシュグループを作成 + + FEM mesh from shape by Netgen + Netgenによる形状からのFEMメッシュ + + + + FEM mesh from shape by Netgen + Netgenによる形状からのFEMメッシュ @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) CalculiX FEM ソルバーを作成 (実験的実装) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - ソルバー CalculiX (実験的実装) + + Solver CalculiX Standard + ソルバー CalculiX 標準 - - Creates a FEM solver CalculiX (experimental) - CalculiX FEM ソルバーを作成 (実験的実装) + + Creates a standard FEM solver CalculiX with ccx tools + 標準FEMソルバーであるccxツール付属CalculiXを作成 + + + + Solver CalculiX + ソルバー CalculiX + + + + Creates a FEM solver CalculiX + FEMソルバーCalculiXを作成 @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver ソルバー属性を変更し、選択したソルバーのための計算を実行 + + + FEM_SolverElmer - - Solver job control - ソルバー ジョブ制御 + + Solver Elmer + ソルバー Elmer - - Changes solver attributes and runs the calculations for the selected solver - ソルバー属性を変更し、選択したソルバーのための計算を実行 + + Solver Elmer + ソルバー Elmer @@ -615,35 +647,12 @@ Remove 削除 - - - Add - 追加 - Remove 削除 - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - ソルバー CalculiX - - - - Creates a FEM solver CalculiX - FEMソルバーCalculiXを作成 - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm index 3d3772f7de..0ea38b943a 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts index 2ecd0b484c..7b98e9b95e 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creates a nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Enlever - - - Add - Add - Remove Enlever - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm index c7f14e8cee..da73acfe6e 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index cae0a8653b..773be7b01e 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ 비선형 기계 재료 생성 - + Creates a nonlinear mechanical material 비선형 기계 재료 생성 + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + 솔버 CalculiX + + + + Creates a FEM solver CalculiX + FEM 솔버 CalculiX 생성 @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - 솔버 작업 제어 + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove 제거 - - - Add - 추가 - Remove 제거 - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - 솔버 CalculiX - - - - Creates a FEM solver CalculiX - FEM 솔버 CalculiX 생성 - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm index fef29c4ddb..d2bfabfb3e 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts index 1a19924d34..798b08c462 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Paverčia paviršinį BE tinklą į geometrinį tinklą - - - Convert the surface of a FEM mesh to a mesh - Paverčia paviršinį BE tinklą į geometrinį tinklą - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Sukuria medžiagą su netiesinėmis mechaninėmis fizikinėmis savybėmis - + Creates a nonlinear mechanical material Sukuria medžiagą su netiesinėmis mechaninėmis fizikinėmis savybėmis + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,10 +347,15 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid - Medžiaga kietajam kūnui + Medžiaga pilnaviduriams kūnams @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + Daikto BE tinklas iš „Netgen“ + + + + FEM mesh from shape by Netgen + Daikto BE tinklas iš „Netgen“ @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Sprendiklio darbo valdymas + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -574,7 +606,7 @@ Solid - Pilnaviduris kūnas + Pilnaviduris daiktas @@ -615,41 +647,18 @@ Remove Pašalinti - - - Add - Pridėti - Remove Pašalinti - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape FEM mesh from shape by Netgen - Kūno BE tinklas iš „Netgen“ + Daikto BE tinklas iš „Netgen“ @@ -843,7 +852,7 @@ FEM mesh from shape by Netgen - Kūno BE tinklas iš „Netgen“ + Daikto BE tinklas iš „Netgen“ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm index ac075b9ed2..95cff6cb2d 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index ae5cd655c9..62bc0f053e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Maak een FEM vergelijking voor de Fluxsolver - - - Creates a FEM equation for fluxsolver - Maak een FEM vergelijking voor de Fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Converteer het oppervlak van een FEM maas naar een maas - - - Convert the surface of a FEM mesh to a mesh - Converteer het oppervlak van een FEM maas naar een maas - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creëert een niet-lineair mechanisch materiaal - + Creates a nonlinear mechanical material Creëert een niet-lineair mechanisch materiaal + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Veranderd de solver eigenschap en voor de berekeningen uit voor de gekozen solver + + + FEM_SolverElmer - - Solver job control - Taakbeheer solver + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Veranderd de solver eigenschap en voor de berekeningen uit voor de gekozen solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Verwijderen - - - Add - Toevoegen - Remove Verwijderen - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm index 264a67cf73..638f9a5bfe 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts index 78e2910c8f..fac4a57da5 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creates a nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Fjern - - - Add - Legg til - Remove Fjern - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index 714254b7a8..d5c4b866bf 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 790006737d..6f90cbab94 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Tworzy równanie MES dla fluxsolver - - - Creates a FEM equation for fluxsolver - Tworzy równanie MES dla fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Przekształć powierzchnię siatki MES do siatki - - - Convert the surface of a FEM mesh to a mesh - Przekształć powierzchnię siatki MES do siatki - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,17 +327,30 @@ Tworzy nieliniowy materiał mechaniczny - + Creates a nonlinear mechanical material Tworzy nieliniowy materiał mechaniczny + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Materiał dla bryły + + + + Material for solid + Materiał dla bryły @@ -378,23 +391,18 @@ Display FEM mesh info Wyświetl informacje o siatce MES - - - Display FEM mesh info - Wyświetl informacje o siatce MES - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Siatka MES z kształtu Netgen'a Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Tworzenie siatki MES z kształtu przez generator siatki Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Tworzy grupę siatka MES + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Tworzy grupę siatka MES + + FEM mesh from shape by Netgen + Siatka MES z kształtu Netgen'a + + + + FEM mesh from shape by Netgen + Siatka MES z kształtu Netgen'a @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Tworzy solver MES CalculiX (eksperymentalnie) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (eksperymentalnie) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Tworzy solver MES CalculiX (eksperymentalnie) + + Creates a standard FEM solver CalculiX with ccx tools + Tworzy standardowy solver MES CalculiX korzystając z narzędzi ccx + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Tworzy analizę FEM w CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Zmiany atrybutów solver i uruchamia obliczenia dla wybranego dodatku solver + + + FEM_SolverElmer - - Solver job control - Uruchom kontrolę pracy solvera + + Solver Elmer + Solwer Elmer - - Changes solver attributes and runs the calculations for the selected solver - Zmiany atrybutów solver i uruchamia obliczenia dla wybranego dodatku solver + + Solver Elmer + Solwer Elmer @@ -615,35 +647,12 @@ Remove Usuń - - - Add - Dodaj - Remove Usuń - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Tworzy analizę FEM w CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm index 049d2cb9b6..a91f80a734 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index 376983805d..d5d1a0defd 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Criar uma restrição de velocidade de fluxo inicial @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Cria uma equação FEM para fluxsolver - - - Creates a FEM equation for fluxsolver - Cria uma equação FEM para fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Converter a superfície de uma malha FEM em uma malha - - - Convert the surface of a FEM mesh to a mesh - Converter a superfície de uma malha FEM em uma malha - FEM_MaterialFluid Material for fluid - Material for fluid + Material para fluido + + + + Material for fluid + Material para fluido @@ -327,17 +327,30 @@ Cria um material mecânico não-linear - + Creates a nonlinear mechanical material Cria um material mecânico não-linear + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Material para sólido + + + + Material for solid + Material para sólido @@ -378,23 +391,18 @@ Display FEM mesh info Exibir informações da malha FEM - - - Display FEM mesh info - Exibir informações da malha FEM - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Malha FEM de uma superfície usando o Gmsh Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Criar uma malha FEM de uma superfície usando o Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Cria um grupo de malha FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Cria um grupo de malha FEM + + FEM mesh from shape by Netgen + Forma para malha FEM usando Netgen + + + + FEM mesh from shape by Netgen + Forma para malha FEM usando Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Cria um calculador FEM CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Calculador CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX padrão - - Creates a FEM solver CalculiX (experimental) - Cria um calculador FEM CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Cria uma malha FEM padrão para o CalculiX com as ferramentas ccx + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Criar um calculador FEM usando o CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Altera os atributos do solver e executa os cálculos usando o solver selecionado + + + FEM_SolverElmer - - Solver job control - Controle do solver + + Solver Elmer + Elmo Solver - - Changes solver attributes and runs the calculations for the selected solver - Altera os atributos do solver e executa os cálculos usando o solver selecionado + + Solver Elmer + Elmo Solver @@ -615,35 +647,12 @@ Remove Remover - - - Add - Adicionar - Remove Remover - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Criar um calculador FEM usando o CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm index 330e7b42f5..b8ce00e559 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index d4bb843a32..1392211dcb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Cria uma equação FEM para fluxsolver - - - Creates a FEM equation for fluxsolver - Cria uma equação FEM para fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Converter a superfície de uma malha FEM para uma malha - - - Convert the surface of a FEM mesh to a mesh - Converter a superfície de uma malha FEM para uma malha - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Cria um material mecânico não-linear - + Creates a nonlinear mechanical material Cria um material mecânico não-linear + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Exibir informações da malha FEM - - - Display FEM mesh info - Exibir informações da malha FEM - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Cria um grupo de malha FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Cria um grupo de malha FEM + + FEM mesh from shape by Netgen + Forma para malha FEM usando Netgen + + + + FEM mesh from shape by Netgen + Forma para malha FEM usando Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Criar um calculador FEM CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Calculador CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Criar um calculador FEM CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Criar um calculador FEM usando o CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Altera os atributos do solver e executa os cálculos para o solver selecionado + + + FEM_SolverElmer - - Solver job control - Controle de trabalho do Solver + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Altera os atributos do solver e executa os cálculos para o solver selecionado + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Remover - - - Add - Adicionar - Remove Remover - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Criar um calculador FEM usando o CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm index 74d1830d1f..82a27c99da 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 74c9d2baa0..b8e9bc51f9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creează o ecuație FEM pentru fluxsolver - - - Creates a FEM equation for fluxsolver - Creează o ecuație FEM pentru fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convertește o suprafaţa de Plasă FEM (Metoda Elementului Finit) într-o Plasă - - - Convert the surface of a FEM mesh to a mesh - Convertește o suprafaţa de Plasă FEM (Metoda Elementului Finit) într-o Plasă - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creează un material mecanic neliniar - + Creates a nonlinear mechanical material Creează un material mecanic neliniar + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Afişează informaţii FEM -Metoda Elementului Finit despre Plasă - - - Display FEM mesh info - Afişează informaţii FEM -Metoda Elementului Finit despre Plasă - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creează un grup de Plasă FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creează un grup de Plasă FEM + + FEM mesh from shape by Netgen + O Plasă FEM plecând de la o formă cu Netgen + + + + FEM mesh from shape by Netgen + O Plasă FEM plecând de la o formă cu Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Crează un rezolvitor FEM CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Rezolvitor CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Crează un rezolvitor FEM CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Rezolvitor CalculiX + + + + Creates a FEM solver CalculiX + Creați un rezolvitor FEM Calculix @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Modifică atributele Rezolvitorului şi se execută calcule pentru Rezolvitorul selectat + + + FEM_SolverElmer - - Solver job control - Controlul sarcinilor rezolvitorului + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Modifică atributele Rezolvitorului şi se execută calcule pentru Rezolvitorul selectat + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Elimină - - - Add - Adaugă - Remove Elimină - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Rezolvitor CalculiX - - - - Creates a FEM solver CalculiX - Creați un rezolvitor FEM Calculix - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm index 9a2dc7c06e..b67ce606df 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index f702235c9c..fa1c8bd689 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Создает граничное условие начальной скорости потока для МКЭ @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Создает уравнение МКЭ для решения задач распространения полей - - - Creates a FEM equation for fluxsolver - Создает уравнение МКЭ для решения задач распространения полей - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Решатель тепла Fluxsolver + + + + Fluxsolver heat + Решатель тепла Fluxsolver @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Преобразует поверхность сетки МКЭ в полигональную сетку - - - Convert the surface of a FEM mesh to a mesh - Преобразует поверхность сетки МКЭ в полигональную сетку - FEM_MaterialFluid Material for fluid - Material for fluid + Текучий материал + + + + Material for fluid + Текучий материал @@ -327,17 +327,30 @@ Создает нелинейный механический материал - + Creates a nonlinear mechanical material Создает нелинейный механический материал + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Твердотельный материал + + + + Material for solid + Твердотельный материал @@ -378,23 +391,18 @@ Display FEM mesh info Информация о полигональной сетке МКЭ - - - Display FEM mesh info - Информация о полигональной сетке МКЭ - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Сетка МКЭ из фигуры генерируемая построителем Gmsh Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Создать сетку МКЭ из фигуры с помощью генератора сетки Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Создает группу сетки МКЭ + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Создает группу сетки МКЭ + + FEM mesh from shape by Netgen + Cетка МКЭ из фигуры генерируемая построителем Netgen + + + + FEM mesh from shape by Netgen + Cетка МКЭ из фигуры генерируемая построителем Netgen @@ -477,15 +493,28 @@ Creates a FEM solver CalculiX (experimental) Создает решателя МКЭ CalculiX (экспериментальная) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Решатель CalculiX (экспериментальный) + + Solver CalculiX Standard + Стандартный решатель CalculiX - - Creates a FEM solver CalculiX (experimental) - Создает решателя МКЭ CalculiX (экспериментальная) + + Creates a standard FEM solver CalculiX with ccx tools + Создает стандартный механизм расчета МКЭ CalculiX инструментами ccx + + + + Solver CalculiX + Решатель CalculiX + + + + Creates a FEM solver CalculiX + Создает задачу для решателя МКЭ CalculiX @@ -500,15 +529,18 @@ Changes solver attributes and runs the calculations for the selected solver Изменяет атрибуты решателя и выполняет алгоритмы вычисления выбранного решателя + + + FEM_SolverElmer - - Solver job control - Управление решаемыми задачами решателя + + Solver Elmer + Решатель Elmer - - Changes solver attributes and runs the calculations for the selected solver - Изменяет атрибуты решателя и выполняет алгоритмы вычисления выбранного решателя + + Solver Elmer + Решатель Elmer @@ -616,35 +648,12 @@ Remove Удалить - - - Add - Добавить - Remove Удалить - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Решатель CalculiX - - - - Creates a FEM solver CalculiX - Создает задачу для решателя МКЭ CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm index 86a1c49292..9e2c1396b1 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts index e7019af419..5525e21d95 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creates a nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Odstrániť - - - Add - Pridať - Remove Odstrániť - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm index 7bc49fa51f..42c89db830 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index 829fb1d656..2e638e8bcf 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Ustvari MKE pogoj začetne hitrosti toka @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Ustvari MKE enačbo zareševalnik toka - - - Creates a FEM equation for fluxsolver - Ustvari MKE enačbo zareševalnik toka - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Fluxsolver toplota + + + + Fluxsolver heat + Fluxsolver toplota @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Pretvori površje MKE ploskovja v ploskovje - - - Convert the surface of a FEM mesh to a mesh - Pretvori površje MKE ploskovja v ploskovje - FEM_MaterialFluid Material for fluid - Material for fluid + Snov za tekočino + + + + Material for fluid + Snov za tekočino @@ -327,17 +327,30 @@ Ustvari nelinearen material - + Creates a nonlinear mechanical material Ustvari nelinearen material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Snov za trdnino + + + + Material for solid + Snov za trdnino @@ -378,23 +391,18 @@ Display FEM mesh info Prikaži podatke o ploskovju MKE - - - Display FEM mesh info - Prikaži podatke o ploskovju MKE - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Ploskovje MKE iz Gmsh-jeve oblike Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Ustvari ploskovje MKE iz oblike ploskovjevalnika Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Ustvari skupino ploskovij MKE + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Ustvari skupino ploskovij MKE + + FEM mesh from shape by Netgen + Ploskovje MKE iz Netgenove oblike + + + + FEM mesh from shape by Netgen + Ploskovje MKE iz Netgenove oblike @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Ustvari MKE reševalnik CalculiX (poskusno) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Reševalnik CalculiX (poskusno) + + Solver CalculiX Standard + Reševalnik CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Ustvari MKE reševalnik CalculiX (poskusno) + + Creates a standard FEM solver CalculiX with ccx tools + Ustvari standardni MKE reševalnik CalculiX s ccx orodji + + + + Solver CalculiX + Reševalnik CalculiX + + + + Creates a FEM solver CalculiX + Ustvari MKE CalculiX reševalnik @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Spremeni značilke reševalnika in izvede izračune za izbran reševalnik + + + FEM_SolverElmer - - Solver job control - Nadzor opravil reševalnika + + Solver Elmer + Reševalnik Elmer - - Changes solver attributes and runs the calculations for the selected solver - Spremeni značilke reševalnika in izvede izračune za izbran reševalnik + + Solver Elmer + Reševalnik Elmer @@ -615,35 +647,12 @@ Remove Odstrani - - - Add - Dodaj - Remove Odstrani - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Reševalnik CalculiX - - - - Creates a FEM solver CalculiX - Ustvari MKE CalculiX reševalnik - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm index f1330b033e..7ca587734a 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index 95434da330..4837905c7c 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creates a nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Obriši - - - Add - Додај - Remove Obriši - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm index 529e0c55a2..052484e5bc 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index afc0b2fadf..dafd796fbc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Creates a nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Solver CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Ta bort - - - Add - Lägg till - Remove Ta bort - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Solver CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm index 7453deef95..9f27adc34d 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index be325156a9..b16135b54f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + FEM kısıtlaması başlangıç akış hızı oluşturur @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Fluksolver için bir FEM denklemi oluşturur - - - Creates a FEM equation for fluxsolver - Fluksolver için bir FEM denklemi oluşturur - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + AkıÇözücüsü ısısı + + + + Fluxsolver heat + AkıÇözücüsü ısısı @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh FEM kafes yüzeyi bir kafese dönüştürmek - - - Convert the surface of a FEM mesh to a mesh - FEM kafes yüzeyi bir kafese dönüştürmek - FEM_MaterialFluid Material for fluid - Material for fluid + Sıvı malzemesi + + + + Material for fluid + Sıvı malzemesi @@ -327,17 +327,30 @@ Bir doğrusal olmayan mekanik malzeme oluşturur - + Creates a nonlinear mechanical material Bir doğrusal olmayan mekanik malzeme oluşturur + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Katı malzemesi + + + + Material for solid + Katı malzemesi @@ -378,23 +391,18 @@ Display FEM mesh info FEM kafes (mesh) bilgisini görüntüle - - - Display FEM mesh info - FEM kafes (mesh) bilgisini görüntüle - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Gmsh tarafından şekilden FEM ağ Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Gmsh mesher tarafından bir şekilden bir FEM ağı oluşturun. @@ -419,10 +427,18 @@ Creates a FEM mesh group FEM kafes grup oluşturur + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - FEM kafes grup oluşturur + + FEM mesh from shape by Netgen + FEM süzgeci Netgen tarafından şekil üzerinden + + + + FEM mesh from shape by Netgen + FEM süzgeci Netgen tarafından şekil üzerinden @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Bir FEM çözücüsü Calculix (Deneysel) oluşturur. + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Çözücü CalculiX (Deneysel) + + Solver CalculiX Standard + Çözücü CalculiX Standardı - - Creates a FEM solver CalculiX (experimental) - Bir FEM çözücüsü Calculix (Deneysel) oluşturur. + + Creates a standard FEM solver CalculiX with ccx tools + Ccx araçlarıyla standart bir FEM çözücü CalculiX oluşturur + + + + Solver CalculiX + Çözücü CalculiX + + + + Creates a FEM solver CalculiX + FEM çözücü CalculiX oluşturur @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Çözücü özniteliklerini değiştirir ve hesaplamalar seçili çözücü için çalışır + + + FEM_SolverElmer - - Solver job control - Çözücü iş denetimi + + Solver Elmer + çözücü Elmer - - Changes solver attributes and runs the calculations for the selected solver - Çözücü özniteliklerini değiştirir ve hesaplamalar seçili çözücü için çalışır + + Solver Elmer + çözücü Elmer @@ -615,35 +647,12 @@ Remove Kaldır - - - Add - Ekle - Remove Kaldır - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Çözücü CalculiX - - - - Creates a FEM solver CalculiX - FEM çözücü CalculiX oluşturur - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm index 0781cef73c..071fc9608d 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index 030ea579eb..7aea42100d 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -39,7 +39,7 @@ Elapsed Time: - Elapsed Time: + Минуло часу: @@ -127,7 +127,7 @@ Constraint flow velocity - Constraint flow velocity + Обмеження швидкості потоку @@ -140,12 +140,12 @@ Constraint initial flow velocity - Constraint initial flow velocity + Обмеження початкової швидкості потоку Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Створює обмеження початкової швидкості потоку для МСЕ @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Конвертувати поверхню сітки МСЕ [FEM] в сітку - - - Convert the surface of a FEM mesh to a mesh - Конвертувати поверхню сітки МСЕ [FEM] в сітку - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Створює нелінійний механічний матеріал - + Creates a nonlinear mechanical material Створює нелінійний механічний матеріал + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Розв'язувач CalculiX + + + + Creates a FEM solver CalculiX + Creates a FEM solver CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver + + + FEM_SolverElmer - - Solver job control - Solver job control + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Видалити - - - Add - Додати - Remove Видалити - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Розв'язувач CalculiX - - - - Creates a FEM solver CalculiX - Creates a FEM solver CalculiX - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm index 24eb38b886..40800d8773 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 55d18b2125..2221b498dc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Crea una restricció FEM de la velocitat inicial de flux @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver Crea una equació FEM per a la resolució de flux - - - Creates a FEM equation for fluxsolver - Crea una equació FEM per a la resolució de flux - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + Sistema de resolució del flux de calor + + + + Fluxsolver heat + Sistema de resolució del flux de calor @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh Converteix la superfície de malla FEM en malla - - - Convert the surface of a FEM mesh to a mesh - Converteix la superfície de malla FEM en malla - FEM_MaterialFluid Material for fluid - Material for fluid + Material per a fluid + + + + Material for fluid + Material per a fluid @@ -327,17 +327,30 @@ Crea material mecànic no lineal - + Creates a nonlinear mechanical material Crea material mecànic no lineal + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + Material per a sòlid + + + + Material for solid + Material per a sòlid @@ -378,23 +391,18 @@ Display FEM mesh info Mostra la informació de la malla FEM - - - Display FEM mesh info - Mostra la informació de la malla FEM - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + Malla MEF des d'una forma amb GMSH Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Crea una malla FEM des d'una forma amb el generador de malles Gmsh @@ -419,10 +427,18 @@ Creates a FEM mesh group Crea un grup de malla FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Crea un grup de malla FEM + + FEM mesh from shape by Netgen + Malla FEM de la forma per Netgen + + + + FEM mesh from shape by Netgen + Malla FEM de la forma per Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Crea un sistema de resolució FEM CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Sistema de resolució CalculiX (experimental) + + Solver CalculiX Standard + Sistema de resolució CalculiX estàndard - - Creates a FEM solver CalculiX (experimental) - Crea un sistema de resolució FEM CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Crea un sistema de resolució FEM estàndard CalculiX amb eines ccx + + + + Solver CalculiX + Sistema de resolució del CalculiX + + + + Creates a FEM solver CalculiX + Crea un sistema de resolució FEM basat en CalculiX @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Canvia els atributs del sistema de resolució i executa els càlculs per al sistema de resolució seleccionat + + + FEM_SolverElmer - - Solver job control - Control de treball del sistema de resolució + + Solver Elmer + Sistema de resolució Elmer - - Changes solver attributes and runs the calculations for the selected solver - Canvia els atributs del sistema de resolució i executa els càlculs per al sistema de resolució seleccionat + + Solver Elmer + Sistema de resolució Elmer @@ -615,35 +647,12 @@ Remove Elimina - - - Add - Afig - Remove Elimina - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Sistema de resolució del CalculiX - - - - Creates a FEM solver CalculiX - Crea un sistema de resolució FEM basat en CalculiX - - FEM_MeshFromShape @@ -1983,7 +1992,7 @@ Select an edge, face or body. Only one body is allowed. - Select an edge, face or body. Only one body is allowed. + Seleccioneu una aresta, una cara o un cos. Sols es permet un cos. @@ -1995,7 +2004,7 @@ Fillet works only on parts - Fillet works only on parts + L'arredoniment sols funciona en les peces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm index 5e4da6de04..e89d4bd17c 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index b1b411328a..5f54355668 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Lập phương trình giải pháp dòng chảy theo FEM - - - Creates a FEM equation for fluxsolver - Lập phương trình giải pháp dòng chảy theo FEM - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh Chuyển đổi bề mặt của lưới theo FEM thành lưới - - - Convert the surface of a FEM mesh to a mesh - Chuyển đổi bề mặt của lưới theo FEM thành lưới - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ Tạo vật liệu cơ khí phi tuyến - + Creates a nonlinear mechanical material Tạo vật liệu cơ khí phi tuyến + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Tạo nhóm lưới theo FEM + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Tạo nhóm lưới theo FEM + + FEM mesh from shape by Netgen + Lưới theo FEM được tạo ra từ hình dạng bởi Netgen + + + + FEM mesh from shape by Netgen + Lưới theo FEM được tạo ra từ hình dạng bởi Netgen @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Tạo một giải pháp CalculiX (thử nghiệm) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Giải pháp CalculiX (thử nghiệm) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Tạo một giải pháp CalculiX (thử nghiệm) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + Giải pháp CalculiX + + + + Creates a FEM solver CalculiX + Tạo một giải pháp CalculiX theo FEM @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver Thay đổi các đặc điểm của chương trình giải và thực hiện các phép tính cho bộ giải được chọn + + + FEM_SolverElmer - - Solver job control - Kiểm tra giải quyết công việc + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - Thay đổi các đặc điểm của chương trình giải và thực hiện các phép tính cho bộ giải được chọn + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove Xóa bỏ - - - Add - Thêm mới - Remove Xóa bỏ - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - Giải pháp CalculiX - - - - Creates a FEM solver CalculiX - Tạo một giải pháp CalculiX theo FEM - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm index 957e1a7a7e..4fed96950f 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index 43dd15acbd..3f1ace5e5d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -145,7 +145,7 @@ Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + 创建有限元初始流速约束 @@ -264,18 +264,18 @@ Creates a FEM equation for fluxsolver 为 fluxsolver 建立有限元方程 - - - Creates a FEM equation for fluxsolver - 为 fluxsolver 建立有限元方程 - FEM_EquationHeat Fluxsolver heat - Fluxsolver heat + 热Flux求解器 + + + + Fluxsolver heat + 热Flux求解器 @@ -290,18 +290,18 @@ Convert the surface of a FEM mesh to a mesh 将有限元网格的面转换为网格 - - - Convert the surface of a FEM mesh to a mesh - 将有限元网格的面转换为网格 - FEM_MaterialFluid Material for fluid - Material for fluid + 流体材料 + + + + Material for fluid + 流体材料 @@ -327,17 +327,30 @@ 创建一种非线性机械材料 - + Creates a nonlinear mechanical material 创建一种非线性机械材料 + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid Material for solid - Material for solid + 固体材料 + + + + Material for solid + 固体材料 @@ -378,23 +391,18 @@ Display FEM mesh info 显示有限元网格信息 - - - Display FEM mesh info - 显示有限元网格信息 - FEM_MeshGmshFromShape FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + GMSH 型有限元网格 Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + 用 GMSH 网格生成器从形状创建有限元网格 @@ -419,10 +427,18 @@ Creates a FEM mesh group 创建有限元网格组 + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - 创建有限元网格组 + + FEM mesh from shape by Netgen + Netgen 型有限元网格 + + + + FEM mesh from shape by Netgen + Netgen 型有限元网格 @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) 创建有限元求解 CalculiX (实验) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - CalculiX 求解器(实验) + + Solver CalculiX Standard + CalculiX求解器标准 - - Creates a FEM solver CalculiX (experimental) - 创建有限元求解 CalculiX (实验) + + Creates a standard FEM solver CalculiX with ccx tools + 使用 ccx 工具创建标准的有限元CalculiX求解 + + + + Solver CalculiX + CalculiX求解器 + + + + Creates a FEM solver CalculiX + 建立一个CalculiX求解器 @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver 变更求解器属性并以所选求解器进行解算 + + + FEM_SolverElmer - - Solver job control - 求解器任务设定 + + Solver Elmer + Elmer求解器 - - Changes solver attributes and runs the calculations for the selected solver - 变更求解器属性并以所选求解器进行解算 + + Solver Elmer + Elmer求解器 @@ -615,35 +647,12 @@ Remove 删除 - - - Add - 添加 - Remove 删除 - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - CalculiX求解器 - - - - Creates a FEM solver CalculiX - 建立一个CalculiX求解器 - - FEM_MeshFromShape diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm index 5ae0b59b12..981c03b1b7 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 87a35d3941..1f55ba7884 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - Creates a FEM equation for fluxsolver - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat Fluxsolver heat + + + Fluxsolver heat + Fluxsolver heat + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh 將FEM網格之面轉換為網格 - - - Convert the surface of a FEM mesh to a mesh - 將FEM網格之面轉換為網格 - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid Material for fluid + + + Material for fluid + Material for fluid + FEM material for Fluid @@ -327,11 +327,19 @@ 建立一種非線性機械材料 - + Creates a nonlinear mechanical material 建立一種非線性機械材料 + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + FEM_MaterialSolid @@ -339,6 +347,11 @@ Material for solid Material for solid + + + Material for solid + Material for solid + FEM material for solid @@ -378,11 +391,6 @@ Display FEM mesh info Display FEM mesh info - - - Display FEM mesh info - Display FEM mesh info - FEM_MeshGmshFromShape @@ -419,10 +427,18 @@ Creates a FEM mesh group Creates a FEM mesh group + + + FEM_MeshNetgenFromShape - - Creates a FEM mesh group - Creates a FEM mesh group + + FEM mesh from shape by Netgen + 以Netgen從造型建立FEM網格 + + + + FEM mesh from shape by Netgen + 以Netgen從造型建立FEM網格 @@ -476,15 +492,28 @@ Creates a FEM solver CalculiX (experimental) Creates a FEM solver CalculiX (experimental) + + + FEM_SolverCalculix - - Solver CalculiX (experimental) - Solver CalculiX (experimental) + + Solver CalculiX Standard + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + Solver CalculiX + CalculiX求解器 + + + + Creates a FEM solver CalculiX + 建立一個CalculiX求解器 @@ -499,15 +528,18 @@ Changes solver attributes and runs the calculations for the selected solver 變更求解器屬性並以所選求解器進行運算 + + + FEM_SolverElmer - - Solver job control - 求解器任務設定 + + Solver Elmer + Solver Elmer - - Changes solver attributes and runs the calculations for the selected solver - 變更求解器屬性並以所選求解器進行運算 + + Solver Elmer + Solver Elmer @@ -615,35 +647,12 @@ Remove 移除 - - - Add - 新增 - Remove 移除 - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools - - - - Solver CalculiX - CalculiX求解器 - - - - Creates a FEM solver CalculiX - 建立一個CalculiX求解器 - - FEM_MeshFromShape diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.qm b/src/Mod/Image/Gui/Resources/translations/Image_de.qm index 8211a38b6f..a5b24e6f16 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_de.qm and b/src/Mod/Image/Gui/Resources/translations/Image_de.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.ts b/src/Mod/Image/Gui/Resources/translations/Image_de.ts index 77b8def17d..d18d3c638c 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_de.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_de.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distanz [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm index b5d97ff295..ec0f349751 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm and b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.ts b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.ts index 7b00655b95..c32f03212e 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distancia [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_eu.qm b/src/Mod/Image/Gui/Resources/translations/Image_eu.qm index 554c836509..bc405ae1b5 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_eu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_eu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_eu.ts b/src/Mod/Image/Gui/Resources/translations/Image_eu.ts index ae255039c4..23e193287e 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_eu.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_eu.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distantzia [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fr.ts b/src/Mod/Image/Gui/Resources/translations/Image_fr.ts index 5003b4a1da..ec3a1a474b 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_fr.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_fr.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distance [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_gl.qm b/src/Mod/Image/Gui/Resources/translations/Image_gl.qm index 732769d77f..52906f8bc9 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_gl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_gl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_gl.ts b/src/Mod/Image/Gui/Resources/translations/Image_gl.ts index e5c1abe285..79090d5ba6 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_gl.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_gl.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distancia [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hr.qm b/src/Mod/Image/Gui/Resources/translations/Image_hr.qm index 6603182ca1..54db9c681b 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hr.ts b/src/Mod/Image/Gui/Resources/translations/Image_hr.ts index bd09de2d71..2a72b28177 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_hr.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_hr.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Udaljenost [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm index 4375f92d3c..96c5b15db4 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.ts b/src/Mod/Image/Gui/Resources/translations/Image_hu.ts index 4c14efb5f6..35305bba70 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_hu.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_hu.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Távolság [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_it.qm b/src/Mod/Image/Gui/Resources/translations/Image_it.qm index f38fe9b26c..11debcc17c 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_it.qm and b/src/Mod/Image/Gui/Resources/translations/Image_it.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_it.ts b/src/Mod/Image/Gui/Resources/translations/Image_it.ts index c078dc44f1..742f9b6591 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_it.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_it.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distanza [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm index 659e583971..280df1e960 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.ts b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.ts index 1d50d72982..1d0bdf0729 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distância [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm index d3a961be56..8ac0a4d426 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.ts b/src/Mod/Image/Gui/Resources/translations/Image_ru.ts index 4e79cbe707..0204613743 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_ru.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_ru.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Расстояние [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sl.qm b/src/Mod/Image/Gui/Resources/translations/Image_sl.qm index 7ea950eb7f..bdff5f6d93 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_sl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_sl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sl.ts b/src/Mod/Image/Gui/Resources/translations/Image_sl.ts index 7b71c98ad0..5509da13b4 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_sl.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_sl.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Razdalja [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_tr.qm b/src/Mod/Image/Gui/Resources/translations/Image_tr.qm index 255b813959..0123691e56 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_tr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_tr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_tr.ts b/src/Mod/Image/Gui/Resources/translations/Image_tr.ts index a5ee30af39..d22e3345f4 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_tr.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_tr.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Mesafe [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_uk.qm b/src/Mod/Image/Gui/Resources/translations/Image_uk.qm index 6303c52598..eb258313ae 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_uk.qm and b/src/Mod/Image/Gui/Resources/translations/Image_uk.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_uk.ts b/src/Mod/Image/Gui/Resources/translations/Image_uk.ts index 5a0995f55e..b2d6b6addc 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_uk.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_uk.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Відстань [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm b/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm index 894f77a40b..90878a00db 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm and b/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_val-ES.ts b/src/Mod/Image/Gui/Resources/translations/Image_val-ES.ts index 0a5ee84e25..1f86f8f9d1 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_val-ES.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_val-ES.ts @@ -11,7 +11,7 @@ Distance [mm] - Distance [mm] + Distància [mm] diff --git a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm index e499a51af2..06b66aa6cc 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm and b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.ts b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.ts index 85252b4cb9..ad1ab198a0 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.ts @@ -6,32 +6,32 @@ Scale image plane - Scale image plane + 缩放图像平面 Distance [mm] - Distance [mm] + 距离 [mm] Select first point - Select first point + 选择第一点 <font color='red'>Enter distance</font> - <font color='red'>Enter distance</font> + <font color='red'>输入距离</font> <font color='red'>Select ImagePlane</font> - <font color='red'>Select ImagePlane</font> + <font color='red'>选择图像面</font> Select second point - Select second point + 选择第二点 @@ -44,12 +44,12 @@ Scale image plane - Scale image plane + 缩放图像平面 Scales an image plane by defining a distance between two points - Scales an image plane by defining a distance between two points + 通过定义两个点之间的距离来缩放图像平面 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts index 4ca86fd6af..bff544cf56 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Voeg driehoek by - + Flip normal Swaai normaallyn om - + Clear Maak skoon - + Finish Klaar @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Voltooi diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts index e09679dabe..17d583ef6d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle إضافة مثلث - + Flip normal انقلاب عادي - + Clear مسح - + Finish إنهاء @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish إنهاء diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts index 02d02ad2c3..a950d9e263 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Afegeix un triangle - + Flip normal Inverteix les normals - + Clear Neteja - + Finish Finalitza @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Finalitza diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts index 04771a0c1d..ada321fa42 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Přidat trojúhelník - + Flip normal Převrátit normály - + Clear Vyčistit - + Finish Dokončit @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Dokončit diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm index 54e10ea987..564851aa5c 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts index d0b2ec0267..e13ce6fbd4 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts @@ -1163,8 +1163,8 @@ Bitte starten Sie vorher den Befehl zum Reparieren von Falten This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Dieser Parameter zeigt an, ob ZIP-Komprimierung +beim Schreiben einer Datei im AMF-Format verwendet wird @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Dreieck hinzufügen - + Flip normal Normalen umdrehen - + Clear Löschen - + Finish Fertig @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Fertig diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts index 0c53f6947b..816b79d44d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts @@ -1302,22 +1302,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Προσθέστε τρίγωνο - + Flip normal Αντιστροφή κάθετου διανύσματος - + Clear Εκκαθάριση - + Finish Ολοκλήρωση @@ -1325,7 +1325,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Ολοκλήρωση diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm index 8519d44db4..019dc0c428 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts index 94c11b61d3..4229f2da2c 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts @@ -1162,8 +1162,8 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Este parámetro indica si la compresión ZIP +se utiliza al escribir un archivo en formato AMF @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Añadir triángulo - + Flip normal Invertir normal - + Clear Borrar - + Finish Finalizar @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Terminado diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm index 6135fd8073..4b88a45ac2 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts index 0b6f02a560..a75dc5c0a3 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts @@ -769,7 +769,7 @@ Folds on surface - Tolesturak azaleran + Tolesturak gainazalean @@ -825,7 +825,7 @@ Check failed due to folds on the surface. Please run the command to repair folds first - Egiaztapenak huts egin du azaleran tolesturak daudelako. + Egiaztapenak huts egin du gainazalean tolesturak daudelako. Exekutatu tolesturak zuzentzeko komandoa @@ -944,12 +944,12 @@ Exekutatu tolesturak zuzentzeko komandoa No folds on surface - Tolesturarik ez azaleran + Tolesturarik ez gainazalean %1 folds on surface - %1 tolestura azaleran + %1 tolestura gainazalean @@ -983,7 +983,7 @@ Exekutatu tolesturak zuzentzeko komandoa Enable check for folds on surface - Gaitu azalerako tolesturen egiaztapena + Gaitu gainazaleko tolesturen egiaztapena @@ -1142,12 +1142,12 @@ Exekutatu tolesturak zuzentzeko komandoa Defines the deviation of tessellation to the actual surface - Uneko azaleraren teselazio-desbideratzea definitzen du + Uneko gainazalaren teselazio-desbideratzea definitzen du <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Teselazioa</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Teselatutako sareak azalerarekiko duen gehienezko desbideratzea definitzen du. Balioa txikiagoa bada, errendatze-abiadura motelagoa izango da eta xehetasunak/bereizmena hobea izango da.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Teselazioa</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Teselatutako sareak gainazalarekiko duen gehienezko desbideratzea definitzen du. Balioa txikiagoa bada, errendatze-abiadura motelagoa izango da eta xehetasunak/bereizmena hobea izango da.</span></p></body></html> @@ -1163,8 +1163,8 @@ Exekutatu tolesturak zuzentzeko komandoa This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Parametro honek adierazten du ZIP konpresioa +erabiliko den fitxategi bat AMF formatuan idaztean @@ -1232,7 +1232,7 @@ is used when writing a file in AMF format <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defines the appearance of surfaces.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If this option is set Phong shading is used, if it is unset flat shading is used.</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Itzaleztadura laua/Phong itzaleztadura</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Azaleren itxura definitzen du.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Itzaleztadura lauarekin, azaleraren normalak ez dira definitzen erpinen arabera, eta horrek azalera kurbatuei itxura irreala ematen die; Phong itzaleztadura erabilita, itxura leunagoa sortzen da. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Aukera hau ezarrita badago, Phong itzaleztadura erabiliko da; ezarrita ez badago, itzaleztadura laua erabiliko da.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Itzaleztadura laua/Phong itzaleztadura</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Azaleren itxura definitzen du.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Itzaleztadura lauarekin, gainazalaren normalak ez dira definitzen erpinen arabera, eta horrek gainazal kurbatuei itxura irreala ematen die; Phong itzaleztadura erabilita, itxura leunagoa sortzen da. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Aukera hau ezarrita badago, Phong itzaleztadura erabiliko da; ezarrita ez badago, itzaleztadura laua erabiliko da.</p></body></html> @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Gehitu triangelua - + Flip normal Alderantzikatu normala - + Clear Garbitu - + Finish Amaitu @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Amaitu @@ -1334,7 +1334,7 @@ is used when writing a file in AMF format Surface fit - Azalera doitzea + Gainazala doitzea @@ -1374,7 +1374,7 @@ is used when writing a file in AMF format Before fitting the surface select an area. - Azalera doitu baino lehen, hautatu area bat. + Gainazala doitu baino lehen, hautatu area bat. diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts index e9c8e1d07a..e5712870bb 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Lisää kolmio - + Flip normal Käännä normaalit päinvastaisiksi - + Clear Tyhjennä - + Finish Valmis @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Valmis diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts index a8b7e60158..12d2c929c4 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Dagdagan ng tatsulok - + Flip normal Flip normal - + Clear Malinaw - + Finish Tapos na @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Tapos na diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm index 7f48e82c17..b298bcf6df 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts index f6760339f8..0b698c4033 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts @@ -1162,8 +1162,8 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Ce paramètre indique si la compression ZIP +est utilisée lors de l'écriture d'un fichier au format AMF @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Ajouter un triangle - + Flip normal Inverser les normales - + Clear Effacer - + Finish Terminer @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Terminer diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm index bb9c27cc1e..ab743e22fc 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts index 84d6570414..711faac466 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts @@ -1162,8 +1162,7 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Iste parámetro indica uso de compresión ZIP cando escribe ficheiros en formato AMF @@ -1300,22 +1299,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Engadir triángulo - + Flip normal Inverter normal - + Clear Baleirar - + Finish Rematar @@ -1323,7 +1322,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Rematar diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm index b55247bf65..e41dada3d4 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts index 1447dd74ab..a23a0423f8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts @@ -1163,8 +1163,7 @@ Molimo pokrenite naredbu za popravak nabora This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Ovaj parametar pokazuje koja ZIP kompresija je korištena za zapis u AMF formatu @@ -1301,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Dodaj trokut - + Flip normal Okreni normalu - + Clear Brisanje - + Finish Završiti @@ -1324,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Završiti diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm index fe93b0d31c..35fa5b961e 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts index c677032ab3..cfa89006d0 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts @@ -1163,8 +1163,7 @@ Kérjük először futtassa a hajlítás javítása parancsot This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Ez a paraméter azt jelzi, hogy a program használ-e ZIP-tömörítést a fájlok AMF formátumban történő írásakor @@ -1301,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Háromszöget adjon hozzá - + Flip normal Normál tükrözés - + Clear Tiszta - + Finish Befejezés @@ -1324,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Befejezés diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts index f8c4f65962..495edabe82 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Tambahkan segitiga - + Flip normal Flip normal - + Clear Bersih - + Finish Selesai @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Selesai diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm index 6b94cb1bd4..cb91ee0b7e 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts index 74dea5c366..eeb3593d14 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts @@ -1162,8 +1162,8 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Questo parametro indica se la compressione ZIP +è utilizzata quando si scrive un file in formato AMF @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Aggiungi triangolo - + Flip normal Inverti la normale - + Clear Cancella - + Finish Termina @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Termina diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts index e8b0cf27be..aae8f134bd 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle 三角形を追加 - + Flip normal 法線を逆向きに設定 - + Clear クリア - + Finish 完了 @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish 完了 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts index 6473d3a58b..684df81a3e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Ajouter un triangle - + Flip normal Inverser les normales - + Clear Clear - + Finish Terminer @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Terminer diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts index 4b4d4ee4de..5395e8947f 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Add triangle - + Flip normal Flip normal - + Clear Clear - + Finish Finish @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Finish diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm index 632653a9f1..065f9bdbd3 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts index 9ea1dbd072..7f86d1ee0e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts @@ -246,7 +246,7 @@ Create mesh from shape... - Sukurti tinklą iš kūno pavidalo... + Sukurti daikto tinklą... @@ -625,7 +625,7 @@ Mesh - Mesh + Tinklas @@ -1020,7 +1020,7 @@ Please run the command to repair folds first Solid: - Vientisinis kūnas: + Pilnaviduris kūnas: @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Pridėti trikampį - + Flip normal Apgręžti normalę - + Clear Išvalyti - + Finish Užbaigti @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Užbaigti diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts index cf0fc06592..54219efa1b 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Driehoek toevoegen - + Flip normal Normaal spiegelen - + Clear Wissen - + Finish Voltooien @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Voltooien diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts index 1e7fcd6b9a..dc0f7f6d27 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Legg til triangel - + Flip normal Vend normal - + Clear Tøm - + Finish Fullfør @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Fullfør diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index 126d1e1ab5..ce8bdfe92e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Dodaj trójkąt - + Flip normal Odwróć wektory normalny - + Clear Wyczyść - + Finish Zakończ @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Zakończ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm index 177a69b7c0..a0cf5e7f46 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts index 47f1bfcce3..b5bd480058 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts @@ -1162,8 +1162,8 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Este parâmetro indica se a compressão ZIP +é usada ao escrever um arquivo no formato AMF @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Adicionar triângulo - + Flip normal Inverter normais - + Clear Limpar - + Finish Concluir @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Concluir diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts index 0bb6d4d2d3..366a7380a5 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Adicionar Triâgulo - + Flip normal Inverter normais - + Clear Limpar - + Finish Terminar @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Terminar diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts index 0255d6dee8..feed31eb46 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Adauga triunghi - + Flip normal Comuta normalele - + Clear Șterge - + Finish Terminare @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Terminare diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index 45f2301e57..222b7fa669 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -1303,22 +1303,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Добавить треугольник - + Flip normal Направить нормаль в противоположную сторону - + Clear Очистить - + Finish Завершить @@ -1326,7 +1326,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Завершить diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts index 25210d104d..4b9ce38fe6 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Pridať trojuholník - + Flip normal Prevrátiť normálu - + Clear Vyčistiť - + Finish Dokončiť @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Dokončiť diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm index cdb616b403..e438014963 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts index ffd3c3e0aa..5b011d6f41 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts @@ -1163,8 +1163,8 @@ Najprej zaženite ukaz za odpravljaje pregibov This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Ta parameter prikazuje ali je pri zapisovanju datoteke + v zapis AMF uporabljeno ZIP stiskanje @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Dodaj trikotnik - + Flip normal Obrni normalo - + Clear Počisti - + Finish Končaj @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Končaj diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts index 2d0e5f38fb..c36c5821bf 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Додај троугао - + Flip normal Окрени нормалу - + Clear Обриши - + Finish Заврши @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Заврши diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts index ac769f90c0..2210c167d5 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Addera triangel - + Flip normal Vänd normal - + Clear Rensa - + Finish Slutför @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Gör klart diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm index 53978f2769..8fcb47b84c 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts index 8f971cc723..1a1bc98b01 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts @@ -1163,8 +1163,7 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Bu parametre, AMF formatında bir dosya yazarken ZIP sıkıştırmasının kullanılıp kullanılmayacağını gösterir @@ -1301,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Üçgen Ekle - + Flip normal Normal çevir - + Clear Temizle - + Finish Bitir @@ -1324,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Bitir diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts index 95a3a80e54..b607fee1dd 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Додати трикутник - + Flip normal Відображення по нормалі - + Clear Очистити - + Finish Завершити @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Завершити diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm index 792fd37081..1fa1c63767 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts index d2800c8945..b9c13be8be 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts @@ -972,7 +972,7 @@ Please run the command to repair folds first Settings - Settings + Paràmetres @@ -1015,7 +1015,7 @@ Please run the command to repair folds first Alt+O - Alt+O + Alt+O @@ -1146,7 +1146,7 @@ Please run the command to repair folds first <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessel·lació</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defineix la desviació màxima de la malla tessel·lada respecte a la superfície. Com més menut és el valor més lenta és la velocitat de renderització la qual cosa augmenta el detall/resolució.</span></p></body></html> @@ -1162,8 +1162,7 @@ Please run the command to repair folds first This parameter indicates whether ZIP compression is used when writing a file in AMF format - This parameter indicates whether ZIP compression -is used when writing a file in AMF format + Aquest paràmetre indica si la compressió ZIP s'utilitza en escriure un fitxer en format AMF @@ -1246,7 +1245,7 @@ is used when writing a file in AMF format <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Pista</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definir les normals pel vèrtex també s'anomena <span style=" font-style:italic;">Ombreig Phong</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">mentre que definir les normals per la cara s'anomena </span>Ombreig pla<span style=" font-style:normal;">.</span></p></body></html></span><span style=" font-weight:600;"> @@ -1300,22 +1299,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Afig un triangle - + Flip normal Inverteix les normals - + Clear Neteja - + Finish Finalitza @@ -1323,7 +1322,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Finalitza diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts index ad0ae6d8bc..a0d8e89f8f 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts @@ -1302,22 +1302,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle Thêm hình tam giác - + Flip normal Đảo ngược tiêu chuẩn - + Clear Xóa - + Finish Hoàn tất @@ -1325,7 +1325,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish Hoàn tất diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm index 1eb84a527c..2e11007c00 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts index 6dbb5c6a13..31586dbe53 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts @@ -1301,22 +1301,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle 增加三角形 - + Flip normal 翻转法线 - + Clear 清除 - + Finish 完成 @@ -1324,7 +1324,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish 完成 @@ -1364,7 +1364,7 @@ is used when writing a file in AMF format Compute - Compute + 计算 @@ -1496,7 +1496,7 @@ is used when writing a file in AMF format Curvature - Curvature + 曲率 @@ -1521,12 +1521,12 @@ is used when writing a file in AMF format Max. Curvature - Max. Curvature + 最大曲率 Min. Curvature - Min. Curvature + 最小曲率 @@ -1560,7 +1560,7 @@ is used when writing a file in AMF format Parameters... - Parameters... + 参数... diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts index 92323c474e..03f74ec20e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts @@ -1300,22 +1300,22 @@ is used when writing a file in AMF format MeshGui::MeshFaceAddition - + Add triangle 加入三角形 - + Flip normal 翻轉正常面 - + Clear 清除 - + Finish 完成 @@ -1323,7 +1323,7 @@ is used when writing a file in AMF format MeshGui::MeshFillHole - + Finish 結束 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.ts index 95b789b02e..f321623f16 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Skep - + Close wire Close wire - + Clear Maak skoon - + Cancel Kanselleer - + Wrong mesh picked Wrong mesh picked - + No point was picked Geen punt is gekies nie @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts index dc6ad7f007..beed16e1b6 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create إنشاء - + Close wire إغلاق الأسلاك - + Clear مسح - + Cancel إلغاء - + Wrong mesh picked اخترت شبكة خاطئة - + No point was picked No point was picked @@ -140,22 +140,22 @@ خط تقريب - + Tolerance to mesh Tolerance to mesh - + Continuity استمرارية - + Maximum curve degree أقصى درجة منحنى - + Start البدء diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts index 08a9d636a3..33ebd1f0a2 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Crea - + Close wire Tanca el filferro - + Clear Neteja - + Cancel Cancel·la - + Wrong mesh picked S'ha seleccionat una malla incorrecta - + No point was picked No s'ha seleccionat cap punt. @@ -140,22 +140,22 @@ Aproximació d'spline - + Tolerance to mesh Tolerància de malla - + Continuity Continuitat - + Maximum curve degree Grau màxim de la corba - + Start Inicia diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts index 738a67f328..f4076d1650 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Vytvořit - + Close wire Uzavření drátu - + Clear Vyčistit - + Cancel Zrušit - + Wrong mesh picked Je vybrána špatná síť - + No point was picked Nebyl vybrán bod @@ -140,22 +140,22 @@ Aproximace splajnu - + Tolerance to mesh Tolerance sítě - + Continuity Pokračování - + Maximum curve degree Maximální stupeň křivky - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts index e18a75ff45..bff3dd770a 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Erstellen - + Close wire Kantenzug schließen - + Clear Löschen - + Cancel Abbrechen - + Wrong mesh picked Falsches Netz ausgewählt - + No point was picked Es wurde kein Punkt ausgewählt @@ -140,22 +140,22 @@ Annäherung durch Splines - + Tolerance to mesh Toleranz zu Netz - + Continuity Kontinuität - + Maximum curve degree Maximaler Grad der Kurve - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts index 98079eca36..ea3908ca9a 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Δημιουργήστε - + Close wire Κλείσιμο σύρματος - + Clear Εκκαθάριση - + Cancel Ακύρωση - + Wrong mesh picked Επιλέχθηκε λάθος πλέγμα - + No point was picked Δεν επιλέχθηκε κανένα σημείο @@ -140,22 +140,22 @@ Προσέγγιση Καμπύλης Spline - + Tolerance to mesh Ανοχή πλέγματος - + Continuity Συνέχεια - + Maximum curve degree Μέγιστος βαθμός καμπύλης - + Start Εκκίνηση diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts index a6df7fcc96..18436fb9e9 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Crear - + Close wire Cerrar alambre - + Clear Limpiar - + Cancel Cancelar - + Wrong mesh picked Malla equivocada seleccionada - + No point was picked No fue elegido ningún punto @@ -140,22 +140,22 @@ Aproximación por Spline - + Tolerance to mesh Tolerancia de malla - + Continuity Continuidad - + Maximum curve degree Grado máximo de la curva - + Start Inicio diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm index 7d2e4b2448..e0d967530e 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts index 3620faf59d..269ac52a0e 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Sortu - + Close wire Itxi lerroa - + Clear Garbitu - + Cancel Utzi - + Wrong mesh picked Sare okerra aukeratu da - + No point was picked Ez da punturik aukeratu @@ -140,22 +140,22 @@ Spline hurbilketa - + Tolerance to mesh Sarearekiko tolerantzia - + Continuity Jarraitutasuna - + Maximum curve degree Kurba-gradu maximoa - + Start Hasi @@ -195,7 +195,7 @@ Surface deviation: - Azaleraren desbideratzea: + Gainazalaren desbideratzea: @@ -205,7 +205,7 @@ Relative surface deviation - Azaleraren desbideratze erlatiboa + Gainazalaren desbideratze erlatiboa @@ -275,7 +275,7 @@ Optimize surface - Optimizatu azalera + Optimizatu gainazala diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts index 8a88baabbd..c1a2d2f06f 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Luo - + Close wire Close wire - + Clear Tyhjennä - + Cancel Peruuta - + Wrong mesh picked Wrong mesh picked - + No point was picked Yhtään kohdetta ei valittu @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Jatkuvuus - + Maximum curve degree Käyrän enimmäiskulma - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts index d142e7d1a2..2d659d41f0 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Gumawa - + Close wire Close wire - + Clear Malinaw - + Cancel Kanselado - + Wrong mesh picked Maling nakuhang mesh - + No point was picked Walang punto ang napili @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance sa mesh - + Continuity Pagtuloy-tuloy - + Maximum curve degree Pinakamataas ng degree ng kurba - + Start Simula diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts index 8875c4a1c9..c480665874 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Créer - + Close wire Fermer un fil - + Clear Effacer - + Cancel Annuler - + Wrong mesh picked Mauvaise maille choisie - + No point was picked Aucun point n'a été sélectionné @@ -140,22 +140,22 @@ Approximation de Spline - + Tolerance to mesh Tolérance pour mailler - + Continuity Continuité - + Maximum curve degree Angle de courbure maximal - + Start Début diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts index cc032b47f8..83fec08699 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Facer - + Close wire Pechar arame - + Clear Baleirar - + Cancel Cancelar - + Wrong mesh picked Selección de malla errada - + No point was picked Ningúm punto escolmado @@ -140,22 +140,22 @@ Aproximación Spline - + Tolerance to mesh Tolerancia de grella - + Continuity Continuidade - + Maximum curve degree Grao máximo da curva - + Start Inicio diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts index 967b2910bb..a181a36b2a 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Stvoriti - + Close wire Zatvori žicu - + Clear Brisanje - + Cancel Otkazati - + Wrong mesh picked Izabrana pogrešna mreža - + No point was picked Ni jedan vrh nije odabran @@ -140,22 +140,22 @@ Kriva aproksimacija - + Tolerance to mesh Odstupanje na mreži - + Continuity Kontinuitet - + Maximum curve degree Maksimalni Stupanj krivulje - + Start Počni diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts index 0c9f5aa39e..34038d069d 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Létrehozás - + Close wire Drótháló lezárása - + Clear Törlés - + Cancel Mégse - + Wrong mesh picked Rossz háló választva - + No point was picked Nem lett pont kiválasztva @@ -140,22 +140,22 @@ Hozzávetőleges görbe - + Tolerance to mesh Tűrés a hálóhoz - + Continuity Folytonosság - + Maximum curve degree Hozzávetőleges szöge a görbének - + Start Kezdő időpont diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts index b7a99bdfd5..0854ceac72 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Membuat - + Close wire Tutup kawat - + Clear Bersih - + Cancel Membatalkan - + Wrong mesh picked Jala yang salah dipetik - + No point was picked Tidak ada gunanya dipilih @@ -140,22 +140,22 @@ Pendekatan Spline - + Tolerance to mesh Toleransi untuk mesh - + Continuity Lanjutkan - + Maximum curve degree Tingkat kurva maksimum - + Start Mulai diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts index 92f7c6eceb..610b8f812f 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Crea - + Close wire Chiudi il wire - + Clear Pulisci - + Cancel Annulla - + Wrong mesh picked Rilevata mesh errata - + No point was picked Nessun punto è stato selezionato @@ -140,22 +140,22 @@ Approssimazione con spline - + Tolerance to mesh Tolleranza discretizzazione della mesh - + Continuity Continuità - + Maximum curve degree Massimo grado di curvatura - + Start Inizio diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts index 0bf1692742..dc1e4f0d09 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create 作成 - + Close wire 閉じた連線 - + Clear クリア - + Cancel キャンセル - + Wrong mesh picked 不適切なメッシュがピックされています。 - + No point was picked ピックされた点はありません @@ -140,22 +140,22 @@ スプライン近似 - + Tolerance to mesh メッシュのトレランス - + Continuity 続行 - + Maximum curve degree 最大曲率 - + Start 開始 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.ts index 5d25414a6f..4f0ec8ee8f 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Créer - + Close wire Close wire - + Clear Clear - + Cancel Annuler - + Wrong mesh picked Wrong mesh picked - + No point was picked Aucun point n'a été sélectionné @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts index 44e720861f..fd26a9bc39 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create 만들기 - + Close wire Close wire - + Clear Clear - + Cancel 취소 - + Wrong mesh picked Wrong mesh picked - + No point was picked No point was picked @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts index ed29d0c299..b9d2b4db6f 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Sukurti - + Close wire Uždaryti laužtę - + Clear Išvalyti - + Cancel Atšaukti - + Wrong mesh picked Pasirinktas netinkamas tinklas - + No point was picked Nėra pasirinkta taškų @@ -140,22 +140,22 @@ Apytikslis atkartojimas glodžiosiomis kreivėmis - + Tolerance to mesh Tinklo tolerancija - + Continuity Continuity - + Maximum curve degree Didžiausias kreivės laipsnis - + Start Pradėti diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts index 6a8fcb3a17..293ce0a7df 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Aanmaken - + Close wire Sluit draad - + Clear Wissen - + Cancel Annuleren - + Wrong mesh picked Verkeerde gaas gepakt - + No point was picked Geen punt was geselecteerd @@ -140,22 +140,22 @@ Benadering spleet - + Tolerance to mesh Tolerantie tot het gaas - + Continuity Continuïteit - + Maximum curve degree Maximaal aantal graden voor de ronding - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.ts index 66fb663d96..8d59bc906e 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Lag - + Close wire Close wire - + Clear Tøm - + Cancel Avbryt - + Wrong mesh picked Wrong mesh picked - + No point was picked No point was picked @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts index 6e9e2f512a..00bcecc9a4 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Utwórz - + Close wire Krzywa zamknięta - + Clear Wyczyść - + Cancel Anuluj - + Wrong mesh picked Wybraną nieodpowiednią siatkę - + No point was picked Nie wybrano żadnego punktu @@ -140,22 +140,22 @@ Przybliżenie splajnu - + Tolerance to mesh Tolerancja do siatki - + Continuity Ciągłość - + Maximum curve degree Maksymalny stopień krzywej - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts index a0c3e89983..1ee4fd1fbb 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Criar - + Close wire Fechar aresta - + Clear Limpar - + Cancel Cancelar - + Wrong mesh picked Malha errada escolhida - + No point was picked Nenhum ponto foi escolhido @@ -140,22 +140,22 @@ Aproximação de spline - + Tolerance to mesh Tolerância da malha - + Continuity Continuidade - + Maximum curve degree Grau máximo da curva - + Start Começar diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts index 297eadde03..b14ce8b1c5 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Criar - + Close wire Fechar traço - + Clear Limpar - + Cancel Cancelar - + Wrong mesh picked Malha errada escolhida - + No point was picked Nenhum ponto foi escolhido @@ -140,22 +140,22 @@ Aproximação de spline - + Tolerance to mesh Tolerância da malha - + Continuity Continuidade - + Maximum curve degree Grau máximo da curva - + Start Começar diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts index 511b381cdd..5b02a5ad83 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Creează - + Close wire Fir închis - + Clear Șterge - + Cancel Renunţă - + Wrong mesh picked Ochiurilor de plasă greşit alese - + No point was picked Nu a fost ales nici un punct @@ -140,22 +140,22 @@ Aproximare Spline - + Tolerance to mesh Toleranta la discretizarea Plasei - + Continuity Continuitate - + Maximum curve degree Unghiul de curbură maximal - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts index 5955046683..702123827c 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Собрать - + Close wire Замкнуть ломаную - + Clear Очистить - + Cancel Отмена - + Wrong mesh picked Выбрана неправильная полигональная сетка - + No point was picked Не выбрано ни одной точки @@ -140,22 +140,22 @@ Апроксимация сплайна - + Tolerance to mesh Допуск для полигональной сетки - + Continuity Непрерывность - + Maximum curve degree Максимальный градус скругления - + Start Запустить diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.ts index 89fa2ce558..93c62f1646 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Vytvoriť - + Close wire Close wire - + Clear Vyčistiť - + Cancel Zrušiť - + Wrong mesh picked Wrong mesh picked - + No point was picked No point was picked @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts index 21413425b2..cefe08644c 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Ustvari - + Close wire Skledni črtovje - + Clear Počisti - + Cancel Prekliči - + Wrong mesh picked Izbrano je napačno ploskovje - + No point was picked Ni izbranih točk @@ -140,22 +140,22 @@ Približek zlepku - + Tolerance to mesh Dopustna odstopanja ploskovja - + Continuity Zveznost - + Maximum curve degree Najvišja stopnja krivulje - + Start Začni diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts index a5fd1d15f4..d9fcb2e372 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Stvori - + Close wire Close wire - + Clear Обриши - + Cancel Поништи - + Wrong mesh picked Wrong mesh picked - + No point was picked Ниједна тачка није одабрана @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts index ad28a4f0bf..2510e3b7fb 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Skapa - + Close wire Close wire - + Clear Rensa - + Cancel Avbryt - + Wrong mesh picked Wrong mesh picked - + No point was picked Ingen punkt markerades @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Kontinuitet - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts index 5da172d5f8..6744883e39 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Oluştur - + Close wire Telin Yakını - + Clear Temizle - + Cancel İptal et - + Wrong mesh picked Yanlış örgü seçildi - + No point was picked Hiçbir nokta seçilmedi @@ -140,22 +140,22 @@ Spline Yaklaşımı - + Tolerance to mesh Örgü toleransı - + Continuity Süreklilik - + Maximum curve degree Maksimum eğri derecesi - + Start Başla diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts index dea9f06dac..9477a77900 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Створити - + Close wire Close wire - + Clear Очистити - + Cancel Скасувати - + Wrong mesh picked Wrong mesh picked - + No point was picked Жодної точки не вибрано @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Неперервність - + Maximum curve degree Maximum curve degree - + Start Початок diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts index 80f0530023..2dd69d91f1 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Crea - + Close wire Tanca el filferro - + Clear Neteja - + Cancel Cancel·la - + Wrong mesh picked S'ha seleccionat una malla incorrecta - + No point was picked No s'ha seleccionat cap punt. @@ -140,22 +140,22 @@ Aproximació d'spline - + Tolerance to mesh Tolerància de malla - + Continuity Continuïtat - + Maximum curve degree Grau màxim de la corba - + Start Inicia diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts index d6fab92892..e8aa2e5ba7 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create Tạo - + Close wire Đóng dây - + Clear Xóa - + Cancel Hủy - + Wrong mesh picked Lưới được chọn sai - + No point was picked Không có điểm nào được chọn @@ -140,22 +140,22 @@ Ước tính đường cong Spline - + Tolerance to mesh Dung sai của lưới - + Continuity Liên tục - + Maximum curve degree Độ cong tối đa - + Start Bắt đầu diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts index 42bd685b10..a15f885f67 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create 创建 - + Close wire 封闭线 - + Clear 清除 - + Cancel 取消 - + Wrong mesh picked 错误的网格选择 - + No point was picked 没有点被选 @@ -140,22 +140,22 @@ 样条逼近 - + Tolerance to mesh 网格公差 - + Continuity 连续性 - + Maximum curve degree 最大曲率 - + Start 开始 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts index 9911023d94..d9195c2cf7 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts @@ -77,32 +77,32 @@ MeshPartGui::CurveOnMeshHandler - + Create 建立 - + Close wire Close wire - + Clear 清除 - + Cancel 取消 - + Wrong mesh picked Wrong mesh picked - + No point was picked 無選定點 @@ -140,22 +140,22 @@ Spline Approximation - + Tolerance to mesh Tolerance to mesh - + Continuity Continuity - + Maximum curve degree Maximum curve degree - + Start Start diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm index 7172a581ce..72886bad23 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts index c19efd258f..e4696ae43c 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts @@ -106,27 +106,27 @@ If this is checked, Features will claim their children in the tree view - If this is checked, Features will claim their children in the tree view + Якщо встановити, то властивості будуть застосовані до дочірніх обʼєктів у дереві перегляду Print debug information in the Console - Print debug information in the Console + Вивести налагоджувальну інформацію в консолі The path to the OpenSCAD executable - The path to the OpenSCAD executable + Шлях до виконуваного файлу OpenSCAD Minimum angle for a fragment - Minimum angle for a fragment + Мінімальний кут для фрагменту Minimum size of a fragment - Minimum size of a fragment + Мінімальний розмір фрагменту @@ -184,7 +184,7 @@ Error all shapes must be either 2D or both must be 3D - Error all shapes must be either 2D or both must be 3D + Помилка: усі обʼєкти повинні бути або дво-, або тривимірними @@ -249,7 +249,7 @@ Remove fusion, apply placement to children, and color randomly - Remove fusion, apply placement to children, and color randomly + Видалити злиття та випадково застосувати розташування та колір до дочірніх обʼєктів @@ -288,7 +288,7 @@ Export objects as meshes and use OpenSCAD to perform a boolean operation - Export objects as meshes and use OpenSCAD to perform a boolean operation + Експортувати об'єкти у вигляді сітки та задіяти OpenSCAD для виконання логічних операцій @@ -314,7 +314,7 @@ Create Refine Shape Feature - Create Refine Shape Feature + Створити елемент, що уточнює форму @@ -327,7 +327,7 @@ Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Видалити обраний та всі дочірні об'єкти, на які відсутні посилання з інших об'єктів @@ -340,7 +340,7 @@ Replace an object in the Feature Tree. Please select old, new, and parent object - Replace an object in the Feature Tree. Please select old, new, and parent object + Замінити об'єкт у дереві властивостей. Оберіть, будь ласка, старий, новий та породжуючий об'єкт diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.qm b/src/Mod/Part/Gui/Resources/translations/Part_ca.qm index ea32d0b3c5..a58bf23a41 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ca.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ca.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index 28542d10dd..b2c815fbd6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -5261,7 +5261,7 @@ Do you want to continue? Join - Join + Unió diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm index b25823c926..7946a2318e 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index bd2cddf525..73105330a9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -745,20 +745,20 @@ Sakatu 'Jarraitu' elementua sortzeko, edo 'Abortatu' eragiketa uzteko. Tangent to surface (U) AttachmentLine mode caption - Azaleraren tangentea (U) + Gainazalaren tangentea (U) Tangent to surface, along U parameter. Vertex link defines where. AttachmentLine mode tooltip - Azalera baten tangentea, U parametroan zehar. Erpin-esteka batek definituko du zein puntutan. + Gainazal baten tangentea, U parametroan zehar. Erpin-esteka batek definituko du zein puntutan. Tangent to surface (V) AttachmentLine mode caption - Azaleraren tangentea (V) + Gainazalaren tangentea (V) @@ -836,13 +836,13 @@ Sakatu 'Jarraitu' elementua sortzeko, edo 'Abortatu' eragiketa uzteko. Normal to surface AttachmentLine mode caption - Normaletik azalerara + Normaletik gainazalera Line perpendicular to surface at point set by vertex. AttachmentLine mode tooltip - Erpinaren arabera ezarritako puntuan azalerarekiko perpendikularra den lerroa. + Erpinaren arabera ezarritako puntuan gainazalarekiko perpendikularra den lerroa. @@ -923,13 +923,13 @@ Sakatu 'Jarraitu' elementua sortzeko, edo 'Abortatu' eragiketa uzteko. Tangent to surface AttachmentPlane mode caption - Azaleraren tangentea + Gainazalaren tangentea Plane is made tangent to surface at vertex. AttachmentPlane mode tooltip - Planoa azaleraren tangentea da erpinean. + Planoa gainazalaren tangentea da erpinean. @@ -1120,13 +1120,13 @@ Sakatu 'Jarraitu' elementua sortzeko, edo 'Abortatu' eragiketa uzteko. XY tangent to surface Attachment3D mode caption - Azaleraren XY tangentea + Gainazalaren XY tangentea X' Y' plane is made tangent to surface at vertex. Attachment3D mode tooltip - X' Y' planoa azaleraren tangentea da erpinean. + X' Y' planoa gainazalaren tangentea da erpinean. @@ -3180,7 +3180,7 @@ Markatu ertz-entitate bat edo gehiago. Write out curves in parametric space of surface - Idatzi kurbak azaleraren espazio parametrikoan + Idatzi kurbak gainazalaren espazio parametrikoan @@ -3845,12 +3845,12 @@ Markatu ertz-entitate bat edo gehiago. Defines the deviation of tessellation to the actual surface - Uneko azaleraren teselazio-desbideratzea definitzen du + Uneko gainazalaren teselazio-desbideratzea definitzen du <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Teselazioa</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Teselatutako sareak azalerarekiko duen gehienezko desbideratzea definitzen du. Balioa txikiagoa bada, errendatze-abiadura motelagoa izango da eta xehetasunak/bereizmena hobea izango da.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Teselazioa</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Teselatutako sareak gainazalarekiko duen gehienezko desbideratzea definitzen du. Balioa txikiagoa bada, errendatze-abiadura motelagoa izango da eta xehetasunak/bereizmena hobea izango da.</span></p></body></html> @@ -4930,12 +4930,12 @@ Do you want to continue? Invalid Point On Curve On Surface - Kurbako edo azalerako puntu baliogabea + Kurbako edo gainazaleko puntu baliogabea Invalid Point On Surface - Azalerako puntu baliogabea + Gainazaleko puntu baliogabea @@ -4955,17 +4955,17 @@ Do you want to continue? No Curve On Surface - Kurbarik ez azaleran + Kurbarik ez gainazalean Invalid Curve On Surface - Kurba baliogabea azaleran + Kurba baliogabea gainazalean Invalid Curve On Closed Surface - Kurba baliogabea azalera itxian + Kurba baliogabea gainazal itxian @@ -5015,7 +5015,7 @@ Do you want to continue? No Surface - Azalerarik ez + Gainazalik ez @@ -5150,7 +5150,7 @@ Do you want to continue? BOPAlgo_InvalidCurveOnSurface - BOPAlgo - Baliogabeko kurba azaleran + BOPAlgo - Baliogabeko kurba gainazalean diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm index d08f4617bc..a61b2023d5 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 333874dc9f..8035a82c8e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -263,7 +263,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Creates a tube - Créer un tube + Crée un tube @@ -299,7 +299,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Split objects where they intersect - Diviser les objets où ils se croisent + Diviser les objets à leur intersection @@ -324,7 +324,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Slice apart - Trancher + Séparer @@ -1766,7 +1766,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Compound tools: working with lists of shapes. - Outils de compilation : travailler avec des listes de formes. + Outils de composition : travailler avec des listes de formes. @@ -1815,7 +1815,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Split objects... - Objets éclatés... + Éclater des objets... @@ -1932,7 +1932,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Remove feature from a shape - Supprimer la fonctionnalité d’une forme + Supprimer la fonction d’une forme @@ -2148,7 +2148,7 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Utility to offset planar shapes - Utilitaire pour décaler les formes planaires + Utilitaire pour décaler des formes planaires @@ -4205,7 +4205,7 @@ Please check one or more edge entities first. Select adjacent edges - Sélectionnez les bords adjacents + Sélectionnez des bords adjacents @@ -4669,7 +4669,7 @@ Please check one or more edge entities first. Wire from edges - Fil à partir des arêtes + Fil à partir d'arêtes diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm index cd005fe621..b1655dc524 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 9fed589ce4..2517709454 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -4777,7 +4777,7 @@ in the 3D view for the sweep path. Part design - 部品設計 + パートデザイン @@ -5235,7 +5235,7 @@ Do you want to continue? &Part - 部品(&p) + パート(&P) diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.qm b/src/Mod/Part/Gui/Resources/translations/Part_lt.qm index e12fdadec9..3a8a83bd72 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_lt.qm and b/src/Mod/Part/Gui/Resources/translations/Part_lt.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts index 7b65f1253c..31ba68c541 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts @@ -354,7 +354,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Vertex Attacher reference type - Vertex + Viršūnė @@ -456,7 +456,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Solid Attacher reference type - Pilnaviduris kūnas + Pilnaviduris daiktas @@ -471,7 +471,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Deactivated AttachmentPoint mode caption - Neveikiamas + Nepriskirta niekam @@ -567,7 +567,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Vertex AttachmentPoint mode caption - Vertex + Viršūnė @@ -606,7 +606,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Deactivated AttachmentLine mode caption - Neveikiamas + Nepriskirta niekam @@ -794,7 +794,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Line that spans the shortest distance between shapes. AttachmentLine mode tooltip - Arčiausiai geometrinių kūnų esanti tiesė. + Trumpiausia daiktus jungianti atkarpa. @@ -851,7 +851,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Deactivated AttachmentPlane mode caption - Neveikiamas + Nepriskirta niekam @@ -1048,7 +1048,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Deactivated Attachment3D mode caption - Neveikiamas + Nepriskirta niekam @@ -2458,7 +2458,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Attachment mode: - Prijungimo būdas: + Atskaitos sistemos pradžia: @@ -3686,7 +3686,7 @@ Please check one or more edge entities first. Vertex - Vertex + Viršūnė @@ -4342,7 +4342,7 @@ Please check one or more edge entities first. Attachment mode: - Prijungimo būdas: + Atskaitos sistemos pradžia: @@ -4433,7 +4433,7 @@ Please check one or more edge entities first. Vertex - Vertex + Viršūnė @@ -4885,7 +4885,7 @@ Ar vistiek norite tęsti? Vertex - Vertex + Viršūnė @@ -4900,7 +4900,7 @@ Ar vistiek norite tęsti? Solid - Pilnaviduris kūnas + Pilnaviduris daiktas @@ -5266,7 +5266,7 @@ Ar vistiek norite tęsti? Primitives - Paprasčiausi kūnai + Paprastieji daiktai diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index 6e8ec84c55..b45e80e591 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 688b664c71..06b005f0a4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -263,7 +263,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Creates a tube - Creates a tube + Utwórz rurę @@ -294,17 +294,17 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Boolean Fragments - Boolean Fragments + Fragmenty boolowskie Split objects where they intersect - Split objects where they intersect + Podziel obiekty, które się przecinają Select at least two objects, or one or more compounds, first! If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). - Select at least two objects, or one or more compounds, first! If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + Najpierw wybierz co najmniej dwa obiekty lub jeden lub więcej złożeń! Jeśli wybrano tylko jedno złożenie, złożone kształty zostaną przecięte między sobą (w przeciwnym razie związki z przecięciami własnymi są nieważne). diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm index df9bad3e42..001d24cea9 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index aceb2fb6d0..bdd985da22 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -91,7 +91,7 @@ Error: {err} - Error: {err} + Помилка: {err} @@ -106,7 +106,7 @@ Attachment... - Attachment... + Вкладення... @@ -134,7 +134,7 @@ Bad selection - Bad selection + Поганий вибір @@ -170,7 +170,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Bad selection - Bad selection + Поганий вибір @@ -178,7 +178,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Connect objects - Connect objects + Зʼєднати обʼєкти @@ -230,7 +230,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Bad selection - Bad selection + Поганий вибір @@ -284,7 +284,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Bad selection - Bad selection + Поганий вибір @@ -334,7 +334,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Boolean XOR - Boolean XOR + Логічний XOR @@ -1015,7 +1015,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Plane will pass through first two vertices, and perpendicular to plane that passes through three vertices. AttachmentPlane mode tooltip - Plane will pass through first two vertices, and perpendicular to plane that passes through three vertices. + Площина буде проходити через перші дві вершини та буде перпендикулярною до площини, яка проходить через всі три вершини. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm index 2945b70d80..47792d1673 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm and b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index 080cade27c..91d7ade31e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -61,7 +61,7 @@ Reference combinations: - Reference combinations: + Combinacions de referència: @@ -209,7 +209,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Fuses one object into another, taking care to preserve voids. - Fuses one object into another, taking care to preserve voids. + Fusiona un objecte en un altre i va amb compte de preservar els buits. @@ -258,12 +258,12 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Create tube - Create tube + Crea un tub Creates a tube - Creates a tube + Crea un tub @@ -299,7 +299,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Split objects where they intersect - Split objects where they intersect + Divideix els objectes on s'intersequen @@ -1725,7 +1725,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Chamfer... - Chamfer... + Xamfrà... @@ -1761,12 +1761,12 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Counpound tools - Counpound tools + Eines compostes Compound tools: working with lists of shapes. - Compound tools: working with lists of shapes. + Eines compostes: treballa amb llistes de formes. @@ -1927,12 +1927,12 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Defeaturing - Defeaturing + Eliminador de característiques Remove feature from a shape - Remove feature from a shape + Elimina les característiques d'una forma @@ -2076,7 +2076,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Make face from set of wires (e.g. from a sketch) - Make face from set of wires (e.g. from a sketch) + Crea una cara a partir d'un conjunt de filferros (p ex. d'un esbós) @@ -2130,7 +2130,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Utility to offset in 3D - Utility to offset in 3D + Utilitat per a separar en 3D @@ -2148,7 +2148,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Utility to offset planar shapes - Utility to offset planar shapes + Utilitat per a separar les formes d'un pla @@ -2676,7 +2676,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Chamfer Edges - Chamfer Edges + Arestes del xamfrà @@ -2851,7 +2851,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Extrusion direction link is invalid. %1 - Extrusion direction link is invalid. + L'enllaç de la direcció de l'extrusió no és vàlid. %1 @@ -2968,7 +2968,7 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Edges to chamfer - Edges to chamfer + Arestes a xamfrà @@ -3840,7 +3840,7 @@ Please check one or more edge entities first. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessel·lació</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defineix la desviació màxima de la malla tessel·lada respecte a la superfície. Com més menut és el valor més lenta és la velocitat de renderització la qual cosa augmenta el detall/resolució.</span></p></body></html> @@ -3979,7 +3979,7 @@ Please check one or more edge entities first. Random shape color - Random shape color + Color de forma aleatori @@ -4198,7 +4198,7 @@ Please check one or more edge entities first. Select adjacent edges - Select adjacent edges + Selecciona les arestes adjacents @@ -4443,7 +4443,7 @@ Please check one or more edge entities first. Reference combinations: - Reference combinations: + Combinacions de referència: @@ -4474,7 +4474,7 @@ Please check one or more edge entities first. Check geometry - Check geometry + Comprova la geometria @@ -4662,7 +4662,7 @@ Please check one or more edge entities first. Wire from edges - Wire from edges + Filferro d'arestes @@ -5260,7 +5260,7 @@ Do you want to continue? Join - Join + Unió diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm index 3d0ebee79c..25749ac8e6 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index 6abc0df79e..eb54a70c3b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -1188,7 +1188,7 @@ Boolean: Accept: Input error - Boolean: Accepter: erreur d'entrée + Booléen : Accepter : erreur d'entrée diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index 5c0dedab67..642d83c426 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index 39a3210180..6040ee4950 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -1258,12 +1258,12 @@ Pull direction - Direzione di estrazione + Direzione di trazione Reverse pull direction - Inverti la direzione di estrazione + Inverti la direzione di trazione diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm index c6eeaddff0..1561dbe6f0 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index 02de973e86..3eb3bcdf11 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -3354,7 +3354,7 @@ Although you will be able to migrate any moment later with 'Part Design->Migr Part Design - 部品設計 + パートデザイン diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm index c8d3fdcab5..b4e87dca80 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts index b03550435a..b46b095e0e 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts @@ -47,12 +47,12 @@ Create body - Create body + Kurti daiktą Create a new body and make it active - Sukurti naują kūną ir jį taisyti + Sukurti naują daiktą ir pradėti jį rengti @@ -160,7 +160,7 @@ Duplicates the selected object and adds it to the active body - Klonuoti pasirinktą daiktą ir įtraukti jį į rengiamą kūną + Klonuoti pasirinktąjį daiktą ir įtraukti jį į rengiamąjį daiktą @@ -299,7 +299,7 @@ Move object to other body - Move object to other body + Perkelti daiktą į kitą daiktą @@ -538,7 +538,7 @@ Loft a selected profile through other profile sections and remove it from the body - Sukurti tiesiškąjį paviršių turintį kūną pasirinkus kelis jo skerspjūvius ir atimti jį iš kūno tūrio + Sukurti tiesiškąjį paviršių turintį daiktą pasirinkus kelis jo skerspjūvius @@ -556,7 +556,7 @@ Sweep a selected sketch along a path or to other profiles and remove it from the body - Pratempti pasirinktą brėžinį nurodytu keliu ar skerspjūviu ir atimti jį iš kūno tūrio + Pratempti pasirinktą rėmelį nurodytu keliu ar skerspjūviu @@ -1055,7 +1055,7 @@ You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references cancel the command. - Pasirinkote daiktus, nesančius rengiamo daikto dalimi. Prašom nurodyti kaip elgtis su šiuo pasirinkimu. Jei jūsų netenkina esamas pasirinkimas, atšaukite veiksmą. + Pasirinkote daiktus, nesančius rengiamo daikto nariais. Prašom nurodyti kaip elgtis su šiuo pasirinkimu. Jei jūsų netenkina esamas pasirinkimas, atšaukite veiksmą. @@ -2381,7 +2381,7 @@ Toggle active body - Įgalinti daiktą taisai + Įgalinti arba baigti daikto taisą @@ -2475,12 +2475,12 @@ Select body - Select body + Parinkti daiktą Select a body from the list - Select a body from the list + Pasirinkti daiktą iš sąrašo @@ -2623,7 +2623,7 @@ Select an edge, face or body from an active body. - Pasirinkite kraštinę, sieną ar veikiamojo kūno sudedamąjį kūną. + Pasirinkite kraštinę, sieną ar veikiamąjį daiktą sudarantį kitą daiktą. @@ -2668,7 +2668,7 @@ Please select only one subtractive or additive feature in an active body. - Pirma reikia sukurti tik vieną atimantį ar pridedantį kūną veikiamajame kūne. + Pirma reikia sukurti tik vieną atimantį ar pridedantį daiktą rengiamajame daikte. @@ -2873,7 +2873,7 @@ This may lead to unexpected results. No active Body - Nėra pasirinkto kūno + Nėra jokio pasirinkto daikto @@ -2887,12 +2887,12 @@ If you have a legacy document with PartDesign objects without Body, use the migr Active Body Required - Reikia pasirinkti kūną + Reikia pasirinkti daiktą To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. - Kad sukurti naują detalę, dokumente turi būti pasirinktas veikiamasis kūnas. Prašome pasirinkti esamą kūną (dukart spustelėjus), arba jį sukurti. + Kad sukurti naują detalę, dokumente turi būti pasirinktas daiktas. Prašome pasirinkti daiktą (dukart spustelėjus), arba jį sukurti. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index 4a05893469..19e8c3ce9b 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index 7f552ef58d..24dd605139 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -728,7 +728,7 @@ Face tools - Инструменты редактирования граней + Инструменты работы с гранями @@ -1751,7 +1751,7 @@ Two dimensions - Два измерения + Два размера @@ -2028,7 +2028,7 @@ Two dimensions - Два измерения + Два размера @@ -2313,7 +2313,7 @@ Transformed feature messages - Преобразование процедуры сообщений + Сообщения функции преобразования @@ -2893,7 +2893,7 @@ If you have a legacy document with PartDesign objects without Body, use the migr To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. - Чтобы создать новый объект "разработанной детали", в документе должно быть активное тело. Пожалуйста, сделайте существующее тело активным (двойной клик) или создайте новое. + Что бы создать новый объект в PartDesign, в документе должно быть активное Тело. Пожалуйста, сделайте тело активным (двойной щелчок) или создайте новое Тело. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm index dfc23efee2..951fa8877f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts index a8141fde90..c2f0de5e09 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts @@ -83,12 +83,12 @@ Create a local coordinate system - Create a local coordinate system + Crea un sistema de coordenades local Create a new local coordinate system - Create a new local coordinate system + Crea un sistema nou de coordenades local @@ -795,11 +795,10 @@ • the active Body does not contain a base shape, so there is no material to be removed; • the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: + La funció sol·licitada no es pot crear. Pot ser perquè: - • the active Body does not contain a base shape, so there is no - material to be removed; - • the selected sketch does not belong to the active Body. + • El cos actiu no conté una forma base, per això no hi ha cap material per a ser eliminat; + • L'esbós seleccionat no pertany al cos actiu. @@ -811,11 +810,10 @@ • the active Body does not contain a base shape, so there is no material to be removed; • the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: + La funció sol·licitada no es pot crear. Pot ser perquè: - • the active Body does not contain a base shape, so there is no - material to be removed; - • the selected sketch does not belong to the active Body. + • El cos actiu no conté una forma base, per això no hi ha cap material per a ser eliminat; + • L'esbós seleccionat no pertany al cos actiu. @@ -827,11 +825,10 @@ • the active Body does not contain a base shape, so there is no material to be removed; • the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: + La funció sol·licitada no es pot crear. Pot ser perquè: - • the active Body does not contain a base shape, so there is no - material to be removed; - • the selected sketch does not belong to the active Body. + • El cos actiu no conté una forma base, per això no hi ha cap material per a ser eliminat; + • L'esbós seleccionat no pertany al cos actiu. @@ -1291,7 +1288,7 @@ From other bodies of the same part - From other bodies of the same part + Des d'altres cossos de la mateixa peça @@ -1883,7 +1880,7 @@ Path to sweep along - Path to sweep along + Trajectòria de l'escombratge @@ -2523,32 +2520,32 @@ Several sub-elements selected - Several sub-elements selected + S'han seleccionat diversos sub-elements You have to select a single face as support for a sketch! - You have to select a single face as support for a sketch! + Heu de seleccionar una única cara com a suport de l'esbós. No support face selected - No support face selected + No s'ha seleccionat una cara de suport You have to select a face as support for a sketch! - You have to select a face as support for a sketch! + Heu seleccionat una cara de suport per a un esbós. No planar support - No planar support + No hi ha suport planari You need a planar face as support for a sketch! - You need a planar face as support for a sketch! + Necessiteu una cara d'un pla com a suport per a un esbós. @@ -2753,7 +2750,7 @@ Això pot portar a resultats inesperats. No PartDesign features found that don't belong to a body.Nothing to migrate. - No PartDesign features found that don't belong to a body.Nothing to migrate. + No s'ha trobat cap funció de PartDesign que no pertanga a un cos. No hi ha res per migrar. @@ -2878,9 +2875,9 @@ Això pot portar a resultats inesperats. In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. + Per a utilitzar PartDesign necessiteu un objecte cos actiu en el document. Feu actiu un cos (doble clic) o crear-ne un. -If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. +Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funció de migrar a PartDesign per a posar-los en un cos. @@ -3052,9 +3049,8 @@ This feature is broken and can't be edited. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design->Migrate...'. - Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. -If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design->Migrate...'. + Nota: Si trieu migrar no podreu editar el fitxer amb una versió més antiga del FreeCAD. +Si rebutgeu migrar no podreu utilitzar les funcions noves de Disseny de peces com ara Cossos i Peces. Per tant, no podreu tampoc utilitzar les vostres peces en el banc de muntatge. De totes maneres sempre podreu migrar en qualsevol moment amb «Disseny de peces->Migra...». diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.qm b/src/Mod/Path/Gui/Resources/translations/Path_af.qm index 33107c1ee9..d5daa96414 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_af.qm and b/src/Mod/Path/Gui/Resources/translations/Path_af.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.ts b/src/Mod/Path/Gui/Resources/translations/Path_af.ts index 4878e910b8..535d70fc87 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_af.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_af.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Wysig + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Wysig + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Wysig - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Drilling + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.qm b/src/Mod/Path/Gui/Resources/translations/Path_ar.qm index 683201fef1..5386b8e9fa 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ar.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ar.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts index ced90c9d50..5e564a2890 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts @@ -204,14 +204,14 @@ تمكين التنقيط - - Height to clear top of material - Height to clear top of material + + Enable pecking + تمكين التنقيط - - Diameters of the holes - أقطار من الثقوب + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - تمكين التنقيط + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - ثقوب الملف الشخصي وكذلك الخطوط العريضة + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ زاوية من نمط متعرج - - Maximum distance before a miter join is truncated - يتم اقتطاع المسافة القصوى قبل انضمام تاج الاسقف + + Percent of cutter diameter to step over on each pass + نسبة قطر القاطع إلى الخطوة على كل تمريرة - - Extra offset to apply to the operation. Direction is operation dependent. - إزاحة إضافية لتطبيقها على العملية. الاتجاه يعتمد على العملية. + + Angle of the zigzag pattern + زاوية من نمط متعرج @@ -329,9 +349,9 @@ أسلوب النمط - - Angle of the zigzag pattern - زاوية من نمط متعرج + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves معدل سريع للتحركات الأفقية - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + تعديل + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + تعديل + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point اختيار نقطة البداية + + + Heights + الإرتفاعات + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + اختيار نقطة البداية + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &المسار - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - الأدوات المفيدة - - - - &Path - &المسار - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - تعديل - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + gcode ليتم إدراجها + + + + The tool controller that will be used to calculate the path + وحدة تحكم الأداة التي سيتم استخدامها لحساب المسار + + + + The gcode to be inserted + gcode ليتم إدراجها + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - حفر + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + نقش @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - لإنشاء كائن مسار حلزوني من ميزات كائن أساسي - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + حدد معالج المشاركة + + + + Arguments for the Post Processor (specific to the script) + الحجج الخاصة بمعالج البريد (خاصة بالنص البرمجي) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + حدد معالج المشاركة @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - حدد معالج المشاركة + + Arguments for the Post Processor (specific to the script) + الحجج الخاصة بمعالج البريد (خاصة بالنص البرمجي) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ مواقع قاعدة لهذه العملية - - Holds the calculated value for the StartDepth - يحمل القيمة المحسوبة ل StartDepth + + Holds the calculated value for the FinalDepth + يحمل القيمة المحسوبة ل FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + تعليق اختياري لهذه العملية + + + + User Assigned Label + تسمية المستخدم المعينة + + + + Incremental Step Down of Tool + تنحي تدريجيا من الأداة @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - وحدة تحكم الأداة التي سيتم استخدامها لحساب المسار - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - تمرير التمديد - - - - The distance the facing operation will extend beyond the boundary shape. - والمسافة التي تواجه العملية تمتد خارج شكل الحدود. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - الملف الشخصي للحافة - - - - Profile based on edges - ملف شخصي مستند إلى الحواف - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object يرجى اختيار عنصر مسار واحد بالضبط + + + Creates an array from a selected path + يقوم بإنشاء مصفوفة إنطلاقا من المسار المختار + + + + Please select exactly one path object + يرجى اختيار عنصر مسار واحد بالضبط + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper المرجو اختيار عنصر مسار واحد - - - Please select a Path object - المرجو اختيار عنصر مسار - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - المرجو إختيار عنصر مسار واحد - - - - The selected object is not a path - العنصر الذي قمت بإختياره ليس عبارة عن مسار - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - المرجو إختيار عنصر مسار واحد - - - - The selected object is not a path - العنصر الذي قمت بإختياره ليس عبارة عن مسار - - - - Please select a Path object - المرجو اختيار عنصر مسار - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. زاوية المنحدر. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + زاوية المنحدر. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - المرجو اختيار عنصر مسار واحد - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper العنصر الذي قمت باختياره ليس عبارة عن مسار - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object المرجو إختيار عنصر مسار واحد + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object يرجى اختيار عنصر مسار واحد بالضبط + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object إنشاء كائن اختيار الطائرة + + + Create a Selection Plane object + إنشاء كائن اختيار الطائرة + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - إنهاء اختيار الحلقة - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path يقوم بإنشاء نسخة لا بارامترية لمسار أخر - - - Simple Copy - نسخة عادية - - - - Creates a non-parametric copy of another path - يقوم بإنشاء نسخة لا بارامترية لمسار أخر - - - - Please select exactly one path object - يرجى اختيار عنصر مسار واحد بالضبط - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm مم + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - gcode ليتم إدراجها - - - - The tool controller that will be used to calculate the path - وحدة تحكم الأداة التي سيتم استخدامها لحساب المسار - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm index f924f0971c..16d07f19b9 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index a43bcb90bc..91635d0ca2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -204,14 +204,14 @@ Habilita les passades - - Height to clear top of material - Height to clear top of material + + Enable pecking + Habilita les passades - - Diameters of the holes - Diàmetres dels forats + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Profunditat de perforació incremental abans de retirar-se per a netejar la borumballa + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Habilita les passades + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + L'alçària a què s'inicia l'avanç i l'alçària durant la retirada de l'eina quan el camí està finalitzat + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Pla d'orientació del camí CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Perfila els forats redons - - Orientation plane of CNC path - Pla d'orientació del camí CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Perfila els forats redons - - Profile holes as well as the outline - Perfila els forats a més del contorn + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle del patró en zig-zag - - Maximum distance before a miter join is truncated - Distància màxima abans que es trunque la unió en biaix + + Percent of cutter diameter to step over on each pass + Avanç en percentatge del diàmetre de l'eina de tall en cada passada - - Extra offset to apply to the operation. Direction is operation dependent. - Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + Angle of the zigzag pattern + Angle del patró en zig-zag @@ -329,9 +349,9 @@ Mètode del patró - - Angle of the zigzag pattern - Angle del patró en zig-zag + + Add Optional or Mandatory Stop to the program + Afig al programa una parada opcional o obligatòria @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Velocitat d'avanç ràpid per als desplaçaments horitzontals - - - Direction of spindle rotation - Direcció de rotació d'eix - - - - Feed rate for vertical moves in Z - Velocitat d'avanç per als desplaçaments verticals en Z - - - - Feed rate for horizontal moves - Velocitat d'avanç dels moviments horitzontals - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Edita + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Edita + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ La tasca pare %s no té un objecte de base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Trieu el punt d'inici + + + Heights + Alçàries + + + + AreaOp Operation + Operació AreaOp + + + + Uncreate AreaOp Operation + Elimina l'operació AreaOp + + + + Pick Start Point + Trieu el punt d'inici + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Camí - - - Path Dressup - Aspecte del camí - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configuració del projecte - - - - Path Modification - Path Modification - - - - Helpful Tools - Eines útils - - - - &Path - &Camí - - - - Path Dressup - Aspecte del camí - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Edita - this object already in the list @@ -749,6 +837,14 @@ Crea un perfil basat en una selecció de vores + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -762,17 +858,45 @@ no s'ha trobat cap tasca per a op %s. - + job %s has no Base. la tasca %s no té base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + El gcode que s'ha d'inserir + + + + The tool controller that will be used to calculate the path + El controlador d'eina que s'utilitza per a calcular el camí + + + + The gcode to be inserted + El gcode que s'ha d'inserir + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -849,8 +973,8 @@ - Drilling - Perforació + Creates a Path Drilling object from a features of a base object + Crea un objecte de perforació de camí a partir de característiques d'un objecte base @@ -870,23 +994,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Grava @@ -971,26 +1082,11 @@ Start cutting from the inside or outside Inicia el tall des de l'interior o l'exterior - - - Creates a Path Helix object from a features of a base object - Crea un objecte de camí helicoïdal a partir de característiques d'un objecte base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Inicia el tall des de l'interior o l'exterior - - - Radius increment (must be smaller than tool diameter) - Increment del radi (ha de ser menor que el diàmetre de l'eina) - PathJob @@ -1020,9 +1116,24 @@ No s'admet el tipus d'stock %s (%d) - - Stock not from Base bound box! - No Stockis no des de la Base de caixa lligada! + + Select the Post Processor + Selecciona el postprocessador + + + + Arguments for the Post Processor (specific to the script) + Arguments del postprocessador (específic a l'script) + + + + Stock not a box! + No una caixa d'existències! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Per al càlcul dels camins; més menut augmenta la precisió, però fa més lent el càlcul @@ -1040,9 +1151,9 @@ Col·lecció de controladors d'eina disponibles per aquest treball. - - Unsupported stock type %s (%d) - No s'admet el tipus d'stock %s (%d) + + Select the Post Processor + Selecciona el postprocessador @@ -1050,9 +1161,9 @@ El fitxer d'eixida NC per a aquest projecte - - Select the Post Processor - Selecciona el postprocessador + + Arguments for the Post Processor (specific to the script) + Arguments del postprocessador (específic a l'script) @@ -1060,9 +1171,9 @@ SetupSheet mantenint la configuració per aquest treball - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + Per al càlcul dels camins; més menut augmenta la precisió, però fa més lent el càlcul @@ -1105,14 +1216,9 @@ Tipus d'existència no admès - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1142,6 +1248,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1163,9 +1274,9 @@ Posició de base per a aquesta operació - - Holds the calculated value for the StartDepth - Té el valor calculat per a la StartDepth + + Holds the calculated value for the FinalDepth + Té el valor calculat per a la FinalDepth @@ -1178,14 +1289,9 @@ Profunditat final de l'eina: valor més baix en Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1193,9 +1299,19 @@ Marqueu «fals», per a evitar l'operació de generació de codi - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Un comentari opcional per a aquesta operació + + + + User Assigned Label + Etiqueta assignada de l'usuari + + + + Incremental Step Down of Tool + Pas incremental cap avall de l'eina @@ -1212,11 +1328,6 @@ Make True, if specifying a Start Point Marqueu «cert», si s'especifica un punt final - - - The tool controller that will be used to calculate the path - El controlador d'eina que s'utilitza per a calcular el camí - Base Geometry @@ -1239,6 +1350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Profunditats + + + Make True, if specifying a Start Point + Marqueu «cert», si s'especifica un punt final + PathPocket @@ -1252,16 +1368,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Crea un objecte Trajectòria de buidat 3D des de una cara o cares - - - Vertical faces do not form a loop - ignoring - Las cares verticals no formen un cicle - ignorant - Pocket does not support shape %s.%s El buidatge no admet la forma %s.%s + + + Vertical faces do not form a loop - ignoring + Las cares verticals no formen un cicle - ignorant + Adaptive clearing and profiling @@ -1302,31 +1418,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares - - - Vertical faces do not form a loop - ignoring - Las cares verticals no formen un cicle - ignorant - - - - Pocket does not support shape %s.%s - El buidatge no admet la forma %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Extensió de la passada - - - - The distance the facing operation will extend beyond the boundary shape. - La distància de l'operació de generació de cares s'estendrà més enllà de la forma límit. - Generating toolpath with libarea offsets. @@ -1341,11 +1432,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1366,16 +1452,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1399,26 +1475,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Perfil de vora - - - - Profile based on edges - Perfil basat en vores - - - - Face Profile - Perfil de cara - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1598,6 +1654,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1674,20 +1780,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error d'actualització TC: %s - - Error updating TC: %s - Error d'actualització TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1723,6 +1824,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Crea una matriu a partir del camí seleccionat + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1781,11 +1892,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Seleccioneu un objecte de tipus camí - - - Please select a Path object - Seleccioneu un objecte camí - Dress-up @@ -1892,36 +1998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Crea un aspecte d'os de gos - - - Edit Dogbone Dress-up - Edita l'aspecte d'os de gos - - - - Dogbone Dress-up - Aspecte d'os de gos - - - - Creates a Dogbone Dress-up object from a selected path - Crea un objecte de tipus aspecte d'os de gos a partir d'un camí seleccionat - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Crea un aspecte d'os de gos - Path_DressupDragKnife @@ -1955,36 +2031,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Crea un aspecte - - - DragKnife Dress-up - Aspecte de ganivet arrossegat - - - - Modifies a path to add dragknife corner actions - Modifica un camí per a afegir accions de ganivet arrossegat en les cantonades - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Seleccioneu un objecte camí - - - - Create Dress-up - Crea un aspecte - Path_DressupLeadInOut @@ -2003,21 +2049,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2028,6 +2059,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2041,19 +2082,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle de la rampa. + + + RampEntry Dress-up + Aspecte d'EntradaRampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un objecte de tipus aspecte d'EntradaRampa a partir d'un camí seleccionat + + + + The base path to modify + El camí de base que es modifica + + + + Angle of ramp. + Angle de la rampa. + + + + RampEntry Dress-up + Aspecte d'EntradaRampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un objecte de tipus aspecte d'EntradaRampa a partir d'un camí seleccionat + Path_DressupTag - - - Tag Dress-up - Aspecte d'etiqueta - - - - Creates a Tag Dress-up object from a selected path - Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat - The base path to modify @@ -2079,6 +2140,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radi d'arredoniment per a l'etiqueta + + + The base path to modify + El camí de base que es modifica + + + + Width of tags. + Amplària de les etiquetes + + + + Tag Dress-up + Aspecte d'etiqueta + + + + Creates a Tag Dress-up object from a selected path + Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat + + + + Radius of the fillet for the tag. + Radi d'arredoniment per a l'etiqueta + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2115,33 +2221,22 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objecte de tipus salt en el camí - - - Please select one path object - - Seleccioneu un objecte de tipus camí - The selected object is not a path L'objecte seleccionat no és un camí - - - Create Hop - Crea un salt - - - - Creates a Path Hop object - Crea un objecte de tipus salt en el camí - Please select one path object Please select one path object + + + Create Hop + Crea un salt + Path_Inspect @@ -2165,6 +2260,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspecciona G-code + + + + Inspects the G-code contents of a path + Inspecciona el G-code d'un camí + Path_Job @@ -2234,6 +2339,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Crea un objecte selecció de pla + + + Create a Selection Plane object + Crea un objecte selecció de pla + Path_Post @@ -2298,11 +2408,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No s'han detectat problemes, {} ha passat la verificació bàsica de correctesa. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2322,16 +2427,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Completa la selecció del bucle a partir de dues vores - - - Finish Selecting Loop - Finalitza la selecció del bucle - - - - Complete loop selection from two edges - Completa la selecció del bucle a partir de dues vores - Path_SetupSheet @@ -2340,11 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2364,21 +2454,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Crea una còpia no paramètrica d'un altre camí - - - Simple Copy - Còpia simple - - - - Creates a non-parametric copy of another path - Crea una còpia no paramètrica d'un altre camí - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2392,16 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simular la Trajectòria G-Code en stock - - - CAM Simulator - Simulador CAM - - - - Simulate Path G-Code on stock - Simular la Trajectòria G-Code en stock - Path_Stop @@ -2434,7 +2499,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2476,12 +2541,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Afig un controlador d'eina a la tasca - + Add Tool Controller to the Job Afig un controlador d'eina a la tasca - + Add Tool Controller Afig un controlador d'eina @@ -2550,15 +2615,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Taula d'eines LinuxCNC (*.tbl) - + Open tooltable Obri la taula d'eines - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - Save tooltable @@ -2799,6 +2859,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) + Object not found @@ -2815,19 +2880,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Taula d'eines XML (*.xml);;Taula d'eines LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - El gcode que s'ha d'inserir - - - - The tool controller that will be used to calculate the path - El controlador d'eina que s'utilitza per a calcular el camí - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm index dd70f629fe..77586fe26a 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm and b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index f84774cf8d..a084977d97 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Průměr otvorů + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Upravit + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Upravit + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Výšky + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path Cesta - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Nastavení projektu - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - Cesta - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Upravit - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Vrtání + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Obrobit @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Natavte Nepravdu, aby operace negenerovala kód - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.qm b/src/Mod/Path/Gui/Resources/translations/Path_de.qm index 002de61b4a..3d516b3ceb 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_de.qm and b/src/Mod/Path/Gui/Resources/translations/Path_de.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index 7a2efbb605..a58474d5f8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -31,32 +31,32 @@ The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + Der Vervollständigungsmodus für die Operation: einfach oder mehrfach The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Umlaufrichtung des Werkzeugs um das Werkstück: Gleichlauf (Uhrzeigersinn) oder Gegenlauf (entgegen des Uhrzeigersinns) Clearing pattern to use - Clearing pattern to use + Ausräummuster The model will be rotated around this axis. - The model will be rotated around this axis. + Das Modell wird um diese Achse gedreht. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Start-Index(Winkel) für Rotationssuche Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Stopp-Index(Winkel) für Rotationssuche @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignoriere Bereiche, die unterhalb der angegebenen Tiefe fortfahren. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Tiefe zum Ermitteln von überschüssigen Flächen, um diese auszulassen. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Schneide durch überschüssiges Material bis zur Werkstückkante, um dieses zu befreien. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Verwende Radiuskompensation / Werkzeugbahnkorrektur G41 / G42 @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Sollen Bewegungsbefehle oberhalb von DressupStartDepth ignoriert werden @@ -203,40 +203,60 @@ Enable pecking Spanbrechen aktivieren - - - Height to clear top of material - Rückzugshöhe über Rohmaterial - - - - Diameters of the holes - Durchmesser der Bohrungen - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Inkrementale Bohrtiefe vor dem rück ziehen aus dem Material - Enable pecking Spanbrechen aktivieren - + + Enable dwell + Pause aktivieren + + + + Calculate the tip length and subtract from final depth + Berechnung der Spitzenlänge und Abzug von der Endtiefe + + + + Calculate the tip length and subtract from final depth + Berechnung der Spitzenlänge und Abzug von der Endtiefe + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Die Höhe, bei der die Positionierbewegung beginnt und der Rückzug am Bahnende durchgeführt wird + + + + Shape to use for calculating Boundary + Form zur Berechnen der Begrenzung + + + Orientation plane of CNC path Orientierungsebene des CNC-Pfades - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Form zur Berechnen der Begrenzung + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Runde Profillöcher - - Orientation plane of CNC path - Orientierungsebene des CNC-Pfades + + The base object this collision refers to + Das Basisobjekt auf das sich diese Kollision bezieht - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Runde Profillöcher - - Profile holes as well as the outline - Sowohl Löcher im Profil als auch die Aussenlinie + + The base object this collision refers to + Das Basisobjekt auf das sich diese Kollision bezieht @@ -309,14 +329,14 @@ Winkel des Zick-Zack Musters - - Maximum distance before a miter join is truncated - Maximale Entfernung, bevor Gehrungsverbindungen abgeschnitten werden + + Percent of cutter diameter to step over on each pass + Faktor für die seitliche Zustellung - - Extra offset to apply to the operation. Direction is operation dependent. - Zusätzlicher Versatz der auf die Operation angewendet wird. Richtung ist abhängig von der Operation. + + Angle of the zigzag pattern + Winkel des Zick-Zack Musters @@ -329,9 +349,9 @@ Muster-Methode - - Angle of the zigzag pattern - Winkel des Zick-Zack Musters + + Add Optional or Mandatory Stop to the program + Ein optionaler oder obligatorischer Programmstop @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Eilgang für horizontale Bewegungen - - - Direction of spindle rotation - Drehrichtung der Spindel - - - - Feed rate for vertical moves in Z - Zustell-Rate für vertikale Bewegungen in Z - - - - Feed rate for horizontal moves - Vorschubgeschwindigkeit für horizontale Bewegungen - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Bearbeiten + + + + %s is not a Base Model object of the job %s + %s ist kein Basismodellobjekt des Jobs %s + + + + Base shape %s already in the list + Basisform %s ist bereits auf der Liste + + + + Ignoring vertex + Ignoriere Knoten + + + + Edit + Bearbeiten + + + + %s is not a Base Model object of the job %s + %s ist kein Basismodellobjekt des Jobs %s + Didn't find job %s @@ -587,19 +622,14 @@ Der Jab %s hat kein Basis Objekt - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Spanwinkel (%.2f) führt zu negative Länge der Werkzeugspitze - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein @@ -621,6 +651,109 @@ Pick Start Point Wählen Sie den Startpunkt + + + Heights + Höhen + + + + AreaOp Operation + "AreaOp" Arbeitsschritt + + + + Uncreate AreaOp Operation + Rückgängigmachen des "AreaOp" Arbeitsschrittes + + + + Pick Start Point + Wählen Sie den Startpunkt + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Pfad "Dressup" - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Projekt-Einstellungen - - - - Path Modification - Pfad Änderung - - - - Helpful Tools - Hilfreiche Werkzeuge - - - - &Path - &Path - - - - Path Dressup - Pfad "Dressup" - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Bearbeiten - this object already in the list @@ -750,6 +838,14 @@ Profil mit ausgewählten Kanten erzeugen + + PathAdaptive + + + Adaptive + Adaptiv + + PathAreaOp @@ -763,17 +859,45 @@ Kein Job zur Operation %s gefunden. - + job %s has no Base. Job %s hat keine Basis. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Einzufügender G-Code + + + + The tool controller that will be used to calculate the path + Vermessungspunkt welcher zur Berechnung des Werkzeugweges verwendet wird + + + + The gcode to be inserted + Einzufügender G-Code + + + + PathDeburr + + + The desired width of the chamfer + Die gewünschte Breite der Fase + + + + The additional depth of the tool path + Die zusätzliche Tiefe des Werkzeugpfads + + + + Deburr + Entgraten @@ -850,8 +974,8 @@ - Drilling - Bohren + Creates a Path Drilling object from a features of a base object + Erstellt einen Bohrpfad aus der gewählten Bohrung des Basis Objekts @@ -869,25 +993,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Zusätzliche Basisobjekte, die graviert werden sollen - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Gravierwerkzeug @@ -961,7 +1072,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + Die Richtung der kreisförmigen Schnitte, im Uhrzeigersinn (CW), oder gegen den Uhrzeigersinn (CCW) @@ -973,26 +1084,11 @@ Start cutting from the inside or outside Bearbeitung von innen oder außen starten - - - Creates a Path Helix object from a features of a base object - Erstellt einen Helix (gewendelten) Pfad aus der gewählten Bohrung des Basis Objekts - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Bearbeitung von innen oder außen starten - - - Radius increment (must be smaller than tool diameter) - Radius-Inkrement (muss kleiner sein als Werkzeug-Durchmesser) - PathJob @@ -1022,9 +1118,24 @@ Nicht unterstützte Basis %s (%d) - - Stock not from Base bound box! - Grundmaterial nicht aus einer mit der Basis verbunden Box! + + Select the Post Processor + Wählen Sie den Postprozessor aus + + + + Arguments for the Post Processor (specific to the script) + Argumente für den Post-Prozessor (abhängig vom gewählten Post-Prozessor) + + + + Stock not a box! + Grundkörper ist kein Quader + + + + For computing Paths; smaller increases accuracy, but slows down computation + Zur Berechnung der Werkzeugwege; kleiner erhöht die Genauigkeit, verlangsamt jedoch die Berechnung @@ -1042,9 +1153,9 @@ Auswahl der Tool-Controller die für diesen Job zur Verfügung stehen. - - Unsupported stock type %s (%d) - Nicht unterstützte Basis %s (%d) + + Select the Post Processor + Wählen Sie den Postprozessor aus @@ -1052,9 +1163,9 @@ Die NC-Ausgabedatei für dieses Projekt - - Select the Post Processor - Wählen Sie den Postprozessor aus + + Arguments for the Post Processor (specific to the script) + Argumente für den Post-Prozessor (abhängig vom gewählten Post-Prozessor) @@ -1062,9 +1173,9 @@ Setup Tabelle mit den Einstellungen dieses Jobs - - An optional description for this job - Eine optionale Beschreibung für diesen Arbeitsablauf + + For computing Paths; smaller increases accuracy, but slows down computation + Zur Berechnung der Werkzeugwege; kleiner erhöht die Genauigkeit, verlangsamt jedoch die Berechnung @@ -1107,14 +1218,9 @@ Nicht unterstützte Basis - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Basis-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1144,6 +1250,11 @@ Holds the max Z value of Stock Hält den maximalen Z-Wert des Grundkörpers + + + Holds the min Z value of Stock + Hält den minimalen Z-Wert des Grundkörpers + Make False, to prevent operation from generating code @@ -1165,9 +1276,9 @@ Ausgangspunkt für diese Operation - - Holds the calculated value for the StartDepth - Hält den berechneten Wert für die Starttiefe "StartDepth" + + Holds the calculated value for the FinalDepth + Hält den berechneten Wert für die Endtiefe "FinalDepth" @@ -1180,14 +1291,9 @@ Endgültige Tiefe des Werkzegs - niedrigster Wert in Z - - Holds the max Z value of Stock - Hält den maximalen Z-Wert des Grundkörpers - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starttiefe, interne Verwendung nur für abgeleitete Werte @@ -1195,9 +1301,19 @@ Abwählen, damit die Aktion keinen Code generiert - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Ein optionaler Kommentar für diese Operation + + + + User Assigned Label + Vom Benutzer vergebener Name + + + + Incremental Step Down of Tool + Inkrementaler Abwärtsschritt des Werkzeugs @@ -1214,11 +1330,6 @@ Make True, if specifying a Start Point Auf Wahr setzen, wenn ein Startpunkt angegeben werden soll - - - The tool controller that will be used to calculate the path - Vermessungspunkt welcher zur Berechnung des Werkzeugweges verwendet wird - Base Geometry @@ -1241,6 +1352,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Depths Tiefen + + + Make True, if specifying a Start Point + Auf Wahr setzen, wenn ein Startpunkt angegeben werden soll + PathPocket @@ -1254,16 +1370,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path 3D Pocket object from a face or faces Erstellt ein Path Taschen Objekt anhand von einer oder mehreren Flächen - - - Vertical faces do not form a loop - ignoring - Vertikale Flächen bilden keine Schleife - Ignoriert - Pocket does not support shape %s.%s Die Tasche unterstützt nicht die Form %s.%s + + + Vertical faces do not form a loop - ignoring + Vertikale Flächen bilden keine Schleife - Ignoriert + Adaptive clearing and profiling @@ -1304,31 +1420,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path Pocket object from a face or faces Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen - - - Vertical faces do not form a loop - ignoring - Vertikale Flächen bilden keine Schleife - Ignoriert - - - - Pocket does not support shape %s.%s - Die Tasche unterstützt nicht die Form %s.%s - - - - Adaptive clearing and profiling - Adapatives Räumen und Profillieren - - - - Pass Extension - Durchlauf-Verlängerung - - - - The distance the facing operation will extend beyond the boundary shape. - Der Abstand der Fräsoperation wird über die Begrenzung der Form ragen. - Generating toolpath with libarea offsets. @@ -1344,40 +1435,25 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Benutzt die Kontur der Basisgeometrie. Default length of extensions. - Default length of extensions. + Standardlänge der Verlängerung/Erweiterungen. List of features to extend. - List of features to extend. + Liste der zu erweiternden Eigenschaften. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Wenn aktiviert, werden die verbundenen Erweiterungskanten zu Kabeln vereinigt. @@ -1402,26 +1478,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Profile based on face or faces Auf eine oder mehrere Flächen basierendes Profil - - - Edge Profile - Kanten-basiertes Profil - - - - Profile based on edges - Erstellt einen Fräspfad aus den gewählten Kanten - - - - Face Profile - Flächen-Profil - - - - Profile based on face or faces - Auf eine oder mehrere Flächen basierendes Profil - The tool number in use @@ -1596,12 +1652,62 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Standardgeschwindigkeit für horizontalen Eilgang. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Standardgeschwindigkeit für vertikalen Eilgang. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Die Verwendung dieses Felds hängt vom Ausdruck des Sicherheitsabstandes ab - standardmäßig wird der Wert zur StartTiefe addiert und für den Sicherheitsabstand einer Operation verwendet. + + + + Expression set for the SafeHeight of new operations. + Ausdruck für den Sicherheitsabstand von neuen Operationen. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Die Verwendung dieses Felds hängt vom Ausdruck der Rückzugsebene ab - standardmäßig wird der Wert zur StartTiefe addiert und für die Rückzugsebene einer Operation verwendet. + + + + Expression set for the ClearanceHeight of new operations. + Ausdruck für die Rückzugsebene von neuen Operationen. + + + + Default speed for horizontal rapid moves. + Standardgeschwindigkeit für horizontalen Eilgang. + + + + Default speed for vertical rapid moves. + Standardgeschwindigkeit für vertikalen Eilgang. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Die Verwendung dieses Felds hängt vom Ausdruck des Sicherheitsabstandes ab - standardmäßig wird der Wert zur StartTiefe addiert und für den Sicherheitsabstand einer Operation verwendet. + + + + Expression set for the SafeHeight of new operations. + Ausdruck für den Sicherheitsabstand von neuen Operationen. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Die Verwendung dieses Felds hängt vom Ausdruck der Rückzugsebene ab - standardmäßig wird der Wert zur StartTiefe addiert und für die Rückzugsebene einer Operation verwendet. + + + + Expression set for the ClearanceHeight of new operations. + Ausdruck für die Rückzugsebene von neuen Operationen. @@ -1679,20 +1785,15 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathToolController - - - Unsupported PathToolController template version %s - Nicht von Path unterstützte Version des Werkzeug Kontrollers %s - Error updating TC: %s Fehler beim Aktualisieren des Werkzeug Kontrollers %s - - Error updating TC: %s - Fehler beim Aktualisieren des Werkzeug Kontrollers %s + + Unsupported PathToolController template version %s + Nicht von Path unterstützte Version des Werkzeug Kontrollers %s @@ -1728,6 +1829,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Please select exactly one path object Bitte eine einzelne Bewegungsbahn auswählen + + + Creates an array from a selected path + Erstellt ein Array aus einer ausgewählten Bewegungsbahn + + + + Please select exactly one path object + Bitte eine einzelne Bewegungsbahn auswählen + Path_Comment @@ -1787,11 +1898,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Bitte eine einzelne Bewegungsbahn auswählen - - - Please select a Path object - Bitte wählen Sie ein Pfadobjekt - Dress-up @@ -1898,36 +2004,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create Dogbone Dress-up Dogbone Dress-Up erstellen - - - Edit Dogbone Dress-up - Einstellungen für Dogbone Dress-up - - - - Dogbone Dress-up - DogBone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Erstellt aus dem gewählen Pfad einen Pfad mit Dogbone Dressup - - - - Please select one path object - Bitte eine einzelne Bewegungsbahn auswählen - - - - The selected object is not a path - Das ausgewählte Objekt ist keine Bewegungsbahn - - - - Create Dogbone Dress-up - Dogbone Dress-Up erstellen - Path_DressupDragKnife @@ -1961,36 +2037,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create Dress-up Erzeuge Erweiterung - - - DragKnife Dress-up - Zugmesser DressUp - - - - Modifies a path to add dragknife corner actions - Ändert eine Bewegungsbahn um Schneidmesserecken zu berücksichtigen - - - - Please select one path object - Bitte eine einzelne Bewegungsbahn auswählen - - - - The selected object is not a path - Das ausgewählte Objekt ist keine Bewegungsbahn - - - - Please select a Path object - Bitte wählen Sie ein Pfadobjekt - - - - Create Dress-up - Erzeuge Erweiterung - Path_DressupLeadInOut @@ -2002,37 +2048,32 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b The Style of LeadOut the Path - The Style of LeadOut the Path + Wegfahr Modus von der Kontur The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - Anfahr Modus zur Kontur - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Radius Offset oder Center-Modus LeadInOut Dressup - LeadInOut Dressup + An-/Abfahr Erweiterung Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Erstellt eine Fräserradiuskorrektur G41 / G42 Erweiterungsobjekt von einem ausgewählten Pfad + + + + LeadInOut Dressup + An-/Abfahr Erweiterung + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Erstellt eine Fräserradiuskorrektur G41 / G42 Erweiterungsobjekt von einem ausgewählten Pfad @@ -2047,19 +2088,39 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Angle of ramp. Winkel der Rampe. + + + RampEntry Dress-up + Eintauchwinkel Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Erstellt eine Anfangsrampen-Erweiterung (Dress-up) für den gewählten Pfad + + + + The base path to modify + Zu ändernder Basispfad + + + + Angle of ramp. + Winkel der Rampe. + + + + RampEntry Dress-up + Eintauchwinkel Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Erstellt eine Anfangsrampen-Erweiterung (Dress-up) für den gewählten Pfad + Path_DressupTag - - - Tag Dress-up - Haltesteg Dress-up - - - - Creates a Tag Dress-up object from a selected path - Erstellt einen mit Haltestegen versehenen Pfad aus dem gewählten Pfad - The base path to modify @@ -2085,6 +2146,51 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Radius of the fillet for the tag. Radius der Rundung für den Haltesteg. + + + The base path to modify + Zu ändernder Basispfad + + + + Width of tags. + Breite des Haltesteges. + + + + Tag Dress-up + Haltesteg Dress-up + + + + Creates a Tag Dress-up object from a selected path + Erstellt einen mit Haltestegen versehenen Pfad aus dem gewählten Pfad + + + + Radius of the fillet for the tag. + Radius der Rundung für den Haltesteg. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2121,13 +2227,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path Hop object Erzeugt ein Bewegungsbahn Sprung Objekt - - - Please select one path object - - Bitte eine einzelne Bewegungsbahn auswählen - - The selected object is not a path @@ -2135,21 +2234,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Das ausgewählte Objekt ist keine Bewegungsbahn - - - Create Hop - Erzeuge Sprung - - - - Creates a Path Hop object - Erzeugt ein Bewegungsbahn Sprung Objekt - Please select one path object Bitte eine einzelne Bewegungsbahn auswählen + + + Create Hop + Erzeuge Sprung + Path_Inspect @@ -2173,6 +2267,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Please select exactly one path object Bitte eine einzelne Bewegungsbahn auswählen + + + Inspect G-code + G-code untersuchen + + + + Inspects the G-code contents of a path + Untersucht den G-Code-Inhalt einer Bewegungsbahn + Path_Job @@ -2242,6 +2346,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create a Selection Plane object Erzeugt ein Auswahlebenenobjekt + + + Create a Selection Plane object + Erzeugt ein Auswahlebenenobjekt + Path_Post @@ -2306,11 +2415,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Ein Werkzeug Kontroller wurde nicht gefunden. Es werden Standardwerte übernommen, was gefährlich ist. Bitte fügen Sie einen Werkzeug Kontroller hinzu. - - - No issues detected, {} has passed basic sanity check. - Es wurden keine Probleme festgestellt, {} hat die grundlegende Prüfung bestanden. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2330,16 +2434,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Complete loop selection from two edges Erstelle einen geschlossne Schleife aus 2 ausgewählten Kanten - - - Finish Selecting Loop - Auswahl der Schleifen beenden - - - - Complete loop selection from two edges - Erstelle einen geschlossne Schleife aus 2 ausgewählten Kanten - Path_SetupSheet @@ -2348,11 +2442,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Edit SetupSheet Setup Tabelle bearbeiten - - - Edit SetupSheet - Setup Tabelle bearbeiten - Path_SimpleCopy @@ -2372,21 +2461,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a non-parametric copy of another path erstellt eine nicht-parametrisierte Kopie einer anderen Bewegungsbahn - - - Simple Copy - Einfache Kopie - - - - Creates a non-parametric copy of another path - erstellt eine nicht-parametrisierte Kopie einer anderen Bewegungsbahn - - - - Please select exactly one path object - Bitte eine einzelne Bewegungsbahn auswählen - Path_Simulator @@ -2400,16 +2474,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Simulate Path G-Code on stock Simuliere Bewegungsbahn G-Code auf Grundkörper - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simuliere Bewegungsbahn G-Code auf Grundkörper - Path_Stop @@ -2442,7 +2506,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Installation von OpenCamLib erforderlich. - + This operation requires OpenCamLib to be installed. Installation von OpenCamLib erforderlich. @@ -2484,12 +2548,12 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Einen Werkzeug- Kontroller zum Job hinzufügen - + Add Tool Controller to the Job Einen Werkzeug- Kontroller zum Job hinzufügen - + Add Tool Controller Werkzeug Kontroller bearbeiten @@ -2558,15 +2622,10 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b LinuxCNC Werkzeugtabelle (*.tbl) - + Open tooltable Werkzeugtabelle öffnen - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Werkzeugtabelle XML (XML); HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2807,6 +2866,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Werkzeugtabelle XML (XML); HeeksCAD tooltable (*.tooltable) + Object not found @@ -2823,19 +2887,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Werkzeugtabelle XML (*.XML); LinuxCNC Werkzeugtabelle (*.tbl) - - PathCustom - - - The gcode to be inserted - Einzufügender G-Code - - - - The tool controller that will be used to calculate the path - Vermessungspunkt welcher zur Berechnung des Werkzeugweges verwendet wird - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.qm b/src/Mod/Path/Gui/Resources/translations/Path_el.qm index 0d59c021c3..23dc366b38 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_el.qm and b/src/Mod/Path/Gui/Resources/translations/Path_el.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index bbed89fbdd..5fd0cbde93 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -204,14 +204,14 @@ Ενεργοποίηση ραμφίσματος - - Height to clear top of material - Height to clear top of material + + Enable pecking + Ενεργοποίηση ραμφίσματος - - Diameters of the holes - Διάμετροι των οπών + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Σταδιακό βάθος διάτρησης πριν την απόσυρση για τον καθαρισμό των ρινισμάτων + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Ενεργοποίηση ραμφίσματος + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Το ύψος όπου ξεκινά η τροφοδοσία και το ύψος απόσυρσης εργαλείου όταν η διαδρομή έχει ολοκληρωθεί + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Επίπεδο προσανατολισμού της διαδρομής CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Δημιουργήστε το προφίλ των στρογγυλών οπών - - Orientation plane of CNC path - Επίπεδο προσανατολισμού της διαδρομής CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Δημιουργήστε το προφίλ των στρογγυλών οπών - - Profile holes as well as the outline - Δημιουργήστε το προφίλ των οπών και του περιγράμματος + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Γωνία του μοτίβου zigzag - - Maximum distance before a miter join is truncated - Η μέγιστη απόσταση πριν περικοπεί μια λοξοτομή + + Percent of cutter diameter to step over on each pass + Ποσοστό της διαμέτρου του κόπτη προς υπέρθεση σε κάθε πέρασμα - - Extra offset to apply to the operation. Direction is operation dependent. - Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία. + + Angle of the zigzag pattern + Γωνία του μοτίβου zigzag @@ -329,9 +349,9 @@ Μέθοδος μοτίβου - - Angle of the zigzag pattern - Γωνία του μοτίβου zigzag + + Add Optional or Mandatory Stop to the program + Προσθέστε Προαιρετική ή Υποχρεωτική Διακοπή στο πρόγραμμα @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Ταχύς ρυθμός για οριζόντιες κινήσεις - - - Direction of spindle rotation - Κατεύθυνση περιστροφής της ατράκτου - - - - Feed rate for vertical moves in Z - Ρυθμός τροφοδοσίας για κατακόρυφες κινήσεις στον άξονα Z - - - - Feed rate for horizontal moves - Ρυθμός τροφοδοσίας για οριζόντιες κινήσεις - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Επεξεργασία + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Επεξεργασία + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Η γονική εργασία %s δεν έχει αντικείμενο βάσης - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Η Γωνία Περικοπής Ακμής (%.2f) θα έχει ως αποτέλεσμα αρνητικό μήκος άκρου εργαλείου - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Διαλέξτε Σημείο Εκκίνησης + + + Heights + Ύψη + + + + AreaOp Operation + Λειτουργία AreaOp + + + + Uncreate AreaOp Operation + Κατάργηση Λειτουργίας AreaOp + + + + Pick Start Point + Διαλέξτε Σημείο Εκκίνησης + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path Διαδρομή - - - Path Dressup - Αναδιαμόρφωση Διαδρομής - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Εγκατάσταση Έργου - - - - Path Modification - Τροποποίηση Διαδρομής - - - - Helpful Tools - Βοηθητικά Εργαλεία - - - - &Path - Διαδρομή - - - - Path Dressup - Αναδιαμόρφωση Διαδρομής - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Επεξεργασία - this object already in the list @@ -751,6 +839,14 @@ Δημιουργήστε ένα Προφίλ βασισμένο στην επιλογή ακμών + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ δεν βρέθηκε εργασία για την λειτουργία %s. - + job %s has no Base. η εργασία %s δεν έχει Βάση. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Gcode προς εισαγωγή + + + + The tool controller that will be used to calculate the path + Ο ελεγκτής εργαλείων που θα χρησιμοποιηθεί για τον υπολογισμό της διαδρομής + + + + The gcode to be inserted + Gcode προς εισαγωγή + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Διάτρηση + Creates a Path Drilling object from a features of a base object + Δημιουργεί μια Διαδρομή Διάτρησης από τα χαρακτηριστικά ενός αντικειμένου βάσης @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Χάραξη @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Έναρξη περικοπής από το εσωτερικό ή το εξωτερικό - - - Creates a Path Helix object from a features of a base object - Δημιουργεί ένα αντικείμενο ελικοειδούς διαδρομής από τα χαρακτηριστικά ενός αντικειμένου βάσης - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Έναρξη περικοπής από το εσωτερικό ή το εξωτερικό - - - Radius increment (must be smaller than tool diameter) - Προσαύξηση ακτίνας (θα πρέπει να είναι μικρότερη από την διάμετρο του εργαλείου) - PathJob @@ -1023,9 +1119,24 @@ Μη υποστηριζόμενος τύπος αποθέματος %s(%d) - - Stock not from Base bound box! - Το απόθεμα δεν είναι από το πλαίσιο οριοθέτησης Βάσης! + + Select the Post Processor + Επιλέξτε τον Τελικό Επεξεργαστή + + + + Arguments for the Post Processor (specific to the script) + Παράμετροι για τον Τελικό Επεξεργαστή (συγκεκριμένα για το σενάριο) + + + + Stock not a box! + Το απόθεμα δεν είναι κιβώτιο! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Για τον υπολογισμό Διαδρομών· το μικρότερο μέγεθος αυξάνει την ακρίβεια, αλλά επιβραδύνει τον υπολογισμό @@ -1043,9 +1154,9 @@ Συλλογή διαθέσιμων ελεγκτών εργαλείων για αυτήν την εργασία. - - Unsupported stock type %s (%d) - Μη υποστηριζόμενος τύπος αποθέματος %s(%d) + + Select the Post Processor + Επιλέξτε τον Τελικό Επεξεργαστή @@ -1053,9 +1164,9 @@ Το αρχείο εξόδου NC για αυτό το έργο - - Select the Post Processor - Επιλέξτε τον Τελικό Επεξεργαστή + + Arguments for the Post Processor (specific to the script) + Παράμετροι για τον Τελικό Επεξεργαστή (συγκεκριμένα για το σενάριο) @@ -1063,9 +1174,9 @@ ΦύλλοΕγκατάστασης που περιέχει τις ρυθμίσεις για αυτήν την εργασία - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + Για τον υπολογισμό Διαδρομών· το μικρότερο μέγεθος αυξάνει την ακρίβεια, αλλά επιβραδύνει τον υπολογισμό @@ -1108,14 +1219,9 @@ Μη υποστηριζόμενος τύπος αποθέματος - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Βάση -/+%.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Οι τοποθεσίες βάσης για αυτήν την λειτουργία - - Holds the calculated value for the StartDepth - Περιέχει την υπολογισμένη τιμή για το Βάθος Εκκίνησης + + Holds the calculated value for the FinalDepth + Περιέχει την υπολογισμένη τιμή για το Τελικό Βάθος @@ -1181,14 +1292,9 @@ Τελικό Βάθος του Εργαλείου- χαμηλότερη τιμή στον άξονα Ζ - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Ένα προαιρετικό σχόλιο για αυτήν την Λειτουργία + + + + User Assigned Label + Ετικέτα που έχει Εκχωρηθεί από τον Χρήστη + + + + Incremental Step Down of Tool + Σταδιακό Βήμα Καθόδου του Εργαλείου @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης - - - The tool controller that will be used to calculate the path - Ο ελεγκτής εργαλείων που θα χρησιμοποιηθεί για τον υπολογισμό της διαδρομής - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Βάθη + + + Make True, if specifying a Start Point + Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Δημιουργεί μια Τρισδιάστατη Εσοχή Διαδρομής από μια όψη ή από όψεις - - - Vertical faces do not form a loop - ignoring - Κάθετες όψεις δεν σχηματίζουν βρόχο - πραγματοποιείται παράβλεψη - Pocket does not support shape %s.%s Η εσοχή δεν υποστηρίζει το σχήμα %s.%s + + + Vertical faces do not form a loop - ignoring + Κάθετες όψεις δεν σχηματίζουν βρόχο - πραγματοποιείται παράβλεψη + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις - - - Vertical faces do not form a loop - ignoring - Κάθετες όψεις δεν σχηματίζουν βρόχο - πραγματοποιείται παράβλεψη - - - - Pocket does not support shape %s.%s - Η εσοχή δεν υποστηρίζει το σχήμα %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Επέκταση Περάσματος - - - - The distance the facing operation will extend beyond the boundary shape. - Η απόσταση κατά την οποία θα επεκταθεί η λειτουργία κατασκευής όψεων πέρα από το όριο του σχήματος. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Προφίλ Ακμής - - - - Profile based on edges - Προφίλ βασισμένο σε ακμές - - - - Face Profile - Προφίλ Όψης - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Μη υποστηριζόμενη έκδοση προτύπου ΕλεγκτήΕργαλείωνΔιαδρομής %s - Error updating TC: %s Σφάλμα κατά την ενημέρωση του TC: %s - - Error updating TC: %s - Σφάλμα κατά την ενημέρωση του TC: %s + + Unsupported PathToolController template version %s + Μη υποστηριζόμενη έκδοση προτύπου ΕλεγκτήΕργαλείωνΔιαδρομής %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Παρακαλώ επιλέξτε ακριβώς ένα αντικείμενο διαδρομής + + + Creates an array from a selected path + Δημιουργεί μια διάταξη από μια επιλεγμένη διαδρομή + + + + Please select exactly one path object + Παρακαλώ επιλέξτε ακριβώς ένα αντικείμενο διαδρομής + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής - - - Please select a Path object - Παρακαλώ επιλέξτε ένα αντικείμενο Διαδρομής - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Δημιουργήστε Αναδιαμόρφωση Περικοπής Dogbone - - - Edit Dogbone Dress-up - Επεξεργασία Αναδιαμόρφωσης Περικοπής Dogbone - - - - Dogbone Dress-up - Αναδιαμόρφωση Περικοπής Dogbone - - - - Creates a Dogbone Dress-up object from a selected path - Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Περικοπής Dogbone από μια επιλεγμένη διαδρομή - - - - Please select one path object - Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής - - - - The selected object is not a path - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - - - Create Dogbone Dress-up - Δημιουργήστε Αναδιαμόρφωση Περικοπής Dogbone - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Δημιουργήστε Αναδιαμόρφωση - - - DragKnife Dress-up - Αναδιαμόρφωση Συρόμενης Λεπίδας - - - - Modifies a path to add dragknife corner actions - Τροποποιεί μια διαδρομή για να προσθέσει γωνιακές ενέργειες για τη συρόμενη λεπίδα - - - - Please select one path object - Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής - - - - The selected object is not a path - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - - - Please select a Path object - Παρακαλώ επιλέξτε ένα αντικείμενο Διαδρομής - - - - Create Dress-up - Δημιουργήστε Αναδιαμόρφωση - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Ο Τύπος Μορφοποίησης του σημείου Προσέγγισης στην Διαδρομή - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Γωνία της κεκλιμένης επιφάνειας. + + + RampEntry Dress-up + Αναδιαμόρφωση Καταχώρησης Κεκλιμένης Επιφάνειας + + + + Creates a Ramp Entry Dress-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Καταχώρησης Κεκλιμένης Επιφάνειας από μια επιλεγμένη διαδρομή + + + + The base path to modify + Η διαδρομή βάσης προς τροποποίηση + + + + Angle of ramp. + Γωνία της κεκλιμένης επιφάνειας. + + + + RampEntry Dress-up + Αναδιαμόρφωση Καταχώρησης Κεκλιμένης Επιφάνειας + + + + Creates a Ramp Entry Dress-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Καταχώρησης Κεκλιμένης Επιφάνειας από μια επιλεγμένη διαδρομή + Path_DressupTag - - - Tag Dress-up - Αναδιαμόρφωση Προσάρτησης - - - - Creates a Tag Dress-up object from a selected path - Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Προσάρτησης από μια επιλεγμένη διαδρομή - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Ακτίνα του στρογγυλέματος για την προσάρτηση. + + + The base path to modify + Η διαδρομή βάσης προς τροποποίηση + + + + Width of tags. + Πλάτος των προσαρτήσεων. + + + + Tag Dress-up + Αναδιαμόρφωση Προσάρτησης + + + + Creates a Tag Dress-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Προσάρτησης από μια επιλεγμένη διαδρομή + + + + Radius of the fillet for the tag. + Ακτίνα του στρογγυλέματος για την προσάρτηση. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Δημιουργεί μια Διαδρομή Άλματος - - - Please select one path object - - Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - - Create Hop - Δημιουργήστε Άλμα - - - - Creates a Path Hop object - Δημιουργεί μια Διαδρομή Άλματος - Please select one path object Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής + + + Create Hop + Δημιουργήστε Άλμα + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Παρακαλώ επιλέξτε ακριβώς ένα αντικείμενο διαδρομής + + + Inspect G-code + Επιθεώρηση G-code + + + + Inspects the G-code contents of a path + Επιθεωρεί τα περιεχόμενα του G-code μιας διαδρομής + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Δημιουργήστε ένα αντικείμενο Επιπέδου Επιλογής + + + Create a Selection Plane object + Δημιουργήστε ένα αντικείμενο Επιπέδου Επιλογής + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - Δεν εντοπίστηκαν προβλήματα, το {} πέρασε τον βασικό έλεγχο αξιοπιστίας. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Ολοκληρώστε την επιλογή βρόχου από δύο ακμές - - - Finish Selecting Loop - Ολοκλήρωση Επιλογής Βρόχου - - - - Complete loop selection from two edges - Ολοκληρώστε την επιλογή βρόχου από δύο ακμές - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Δημιουργεί ένα μη παραμετρικό αντίγραφο κάποιας άλλης διαδρομής - - - Simple Copy - Απλό Αντίγραφο - - - - Creates a non-parametric copy of another path - Δημιουργεί ένα μη παραμετρικό αντίγραφο κάποιας άλλης διαδρομής - - - - Please select exactly one path object - Παρακαλώ επιλέξτε ακριβώς ένα αντικείμενο διαδρομής - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Προσομοίωση του G-Code της διαδρομής στο απόθεμα - - - CAM Simulator - Προσομοιωτής CAM - - - - Simulate Path G-Code on stock - Προσομοίωση του G-Code της διαδρομής στο απόθεμα - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Αυτή η λειτουργία απαιτεί την εγκατάσταση της βιβλιοθήκης OpenCamLib. - + This operation requires OpenCamLib to be installed. Αυτή η λειτουργία απαιτεί την εγκατάσταση της βιβλιοθήκης OpenCamLib. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Προσθέστε Ελεγκτή Εργαλείων στην εργασία - + Add Tool Controller to the Job Προσθέστε Ελεγκτή Εργαλείων στην εργασία - + Add Tool Controller Προσθέστε Ελεγκτή Εργαλείων @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Πίνακας εργαλείων LinuxCNC (*.tbl) - + Open tooltable Άνοιγμα πίνακα εργαλείων - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Πίνακας εργαλείων XML (*.xml);; Πίνακας εργαλείων HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm χιλιοστά + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Πίνακας εργαλείων XML (*.xml);; Πίνακας εργαλείων HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Πίνακας εργαλείων XML (*.xml)·Πίνακας εργαλείων LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - Gcode προς εισαγωγή - - - - The tool controller that will be used to calculate the path - Ο ελεγκτής εργαλείων που θα χρησιμοποιηθεί για τον υπολογισμό της διαδρομής - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm index 581305ceae..83c0c6e820 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 8dd67d6fbc..e012012155 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Planar: Plano, superficie 3D. Rotacional: Escaneo rotacional de 4º ejes. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + El modo de finalización para la operación: single o multi-pass The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) Clearing pattern to use - Clearing pattern to use + Patrón de limpieza a utilizar The model will be rotated around this axis. - The model will be rotated around this axis. + El modelo será rotado alrededor de este eje. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Iniciar índice(ángulo) para el escaneo rotativo Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Detener índice(ángulo) para el escaneo rotativo @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignore las áreas que proceden por debajo de la profundidad especificada. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Profundidad usada para identificar las áreas residuales a ignorar. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. @@ -203,40 +203,60 @@ Enable pecking Habilitar picoteo - - - Height to clear top of material - Altura para limpiar la parte superior del material - - - - Diameters of the holes - Diámetros de los agujeros - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Profundidad de taladrado incremental antes de retraerse para limpiar las virutas - Enable pecking Habilitar picoteo - + + Enable dwell + Activar la espera + + + + Calculate the tip length and subtract from final depth + Calcular la longitud de la punta y restar desde profundidad final + + + + Calculate the tip length and subtract from final depth + Calcular la longitud de la punta y restar desde profundidad final + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + La altura donde el avance empieza y altura durante herramienta retrae cuando la ruta esta terminada + + + + Shape to use for calculating Boundary + Forma a utilizar para calcular el límite + + + Orientation plane of CNC path Plano de orientación de la ruta CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Forma a utilizar para calcular el límite + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Agujeros redondos de perfil - - Orientation plane of CNC path - Plano de orientación de la ruta CNC + + The base object this collision refers to + El objeto base a que esta colisión se refiere - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Agujeros redondos de perfil - - Profile holes as well as the outline - Perfilar agujeros así como su contorno + + The base object this collision refers to + El objeto base a que esta colisión se refiere @@ -309,14 +329,14 @@ Ángulo del patrón zigzag - - Maximum distance before a miter join is truncated - Distancia máxima antes de que una Unión de inglete este truncada + + Percent of cutter diameter to step over on each pass + Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada - - Extra offset to apply to the operation. Direction is operation dependent. - Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. + + Angle of the zigzag pattern + Ángulo del patrón zigzag @@ -329,9 +349,9 @@ Método de patrón - - Angle of the zigzag pattern - Ángulo del patrón zigzag + + Add Optional or Mandatory Stop to the program + Añadir paro obligatorio u opcional al programa @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Avance rápido para movimientos horizontales - - - Direction of spindle rotation - Dirección de rotación del eje - - - - Feed rate for vertical moves in Z - Avance para los movimientos verticales en Z - - - - Feed rate for horizontal moves - Velocidad de avance para movimientos horizontales - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Forma base %s ya en la lista + + + + Ignoring vertex + Ignorando vértice + + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ %s trabajo padre no tiene un objeto base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Angulo de esquina de corte (%.2f) resulta en de una longitud de punta de la herramienta negativa - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Elegir Punto de Inicio + + + Heights + Alturas + + + + AreaOp Operation + Operación AreaOp + + + + Uncreate AreaOp Operation + Sin crear operación AreaOp + + + + Pick Start Point + Elegir Punto de Inicio + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Trayectoria - - - Path Dressup - Trayectoria enmascarada - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configuración del proyecto - - - - Path Modification - Modificación de ruta - - - - Helpful Tools - Herramientas útiles - - - - &Path - &Trayectoria - - - - Path Dressup - Trayectoria enmascarada - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Editar - this object already in the list @@ -751,6 +839,14 @@ Crear un perfil basado en la selección de una arista + + PathAdaptive + + + Adaptive + Adaptativo + + PathAreaOp @@ -764,17 +860,45 @@ no hay trabajo para operación %s encontrada. - + job %s has no Base. trabajo %s no tiene ninguna Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + El gcode se insertará + + + + The tool controller that will be used to calculate the path + El controlador de la herramienta que se utilizará para calcular la trayectoria + + + + The gcode to be inserted + El gcode se insertará + + + + PathDeburr + + + The desired width of the chamfer + El ancho deseado del chaflán + + + + The additional depth of the tool path + La profundidad adicional de la herramienta de trayectoria + + + + Deburr + Desbarbar @@ -851,8 +975,8 @@ - Drilling - Perforación + Creates a Path Drilling object from a features of a base object + Crea un objeto trayectoria de perforación de características de un objeto base @@ -870,25 +994,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Objetos base adicionales para ser grabados - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Grabar @@ -962,7 +1073,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + La dirección de los cortes circulares, Sentido horario (CW), o Sentido antihorario (CCW) @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Iniciar el corte desde el interior o exterior - - - Creates a Path Helix object from a features of a base object - Crea un objeto de trayectoria de hélice de características de un objeto base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Iniciar el corte desde el interior o exterior - - - Radius increment (must be smaller than tool diameter) - Incremento de radio (debe ser menor que el diámetro de la herramienta) - PathJob @@ -1023,9 +1119,24 @@ No soportado tipo stock %s (%d) - - Stock not from Base bound box! - ¡Stock no desde la Base de caja atada! + + Select the Post Processor + Seleccione el postprocesador + + + + Arguments for the Post Processor (specific to the script) + Argumentos del postprocesador (específico para la secuencia de comandos) + + + + Stock not a box! + No es una caja stock! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Para calcular Trayectorias; más pequeñas aumenta la precisión, pero retrasa de cómputo @@ -1043,9 +1154,9 @@ Colección de controladores de herramienta disponibles para este trabajo. - - Unsupported stock type %s (%d) - No soportado tipo stock %s (%d) + + Select the Post Processor + Seleccione el postprocesador @@ -1053,9 +1164,9 @@ El archivo de salida NC para este proyecto - - Select the Post Processor - Seleccione el postprocesador + + Arguments for the Post Processor (specific to the script) + Argumentos del postprocesador (específico para la secuencia de comandos) @@ -1063,9 +1174,9 @@ SetupSheet manteniendo la configuración para este trabajo - - An optional description for this job - Una descripción opcional para este trabajo + + For computing Paths; smaller increases accuracy, but slows down computation + Para calcular Trayectorias; más pequeñas aumenta la precisión, pero retrasa de cómputo @@ -1108,14 +1219,9 @@ Tipo de stock no compatible - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Trabajos @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Mantiene el valor Z máximo de Stock + + + Holds the min Z value of Stock + Mantiene el valor Z mínimo de Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Puntos base para esta operación - - Holds the calculated value for the StartDepth - Contiene el valor calculado para StartDepth + + Holds the calculated value for the FinalDepth + Mantiene el valor calculado para FinalDepth @@ -1181,14 +1292,9 @@ Profundidad final de la herramienta- valor mas bajo en Z - - Holds the max Z value of Stock - Mantiene el valor Z máximo de Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Hacer falso, para evitar la operación generación de código - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Un comentario opcional para esta operación + + + + User Assigned Label + Etiqueta de usuario asignado + + + + Incremental Step Down of Tool + Paso incremental hacia abajo de la herramienta @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Hacer verdadero, sí especifica un punto inicial - - - The tool controller that will be used to calculate the path - El controlador de la herramienta que se utilizará para calcular la trayectoria - Base Geometry @@ -1241,6 +1352,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Profundidades + + + Make True, if specifying a Start Point + Hacer verdadero, sí especifica un punto inicial + PathPocket @@ -1254,16 +1370,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Crea un objeto trayectoria de vaciado 3D desde una cara o caras - - - Vertical faces do not form a loop - ignoring - Las caras verticales no forman un ciclo - ignorar - Pocket does not support shape %s.%s El vaciado no admite la forma %s.%s + + + Vertical faces do not form a loop - ignoring + Las caras verticales no forman un ciclo - ignorar + Adaptive clearing and profiling @@ -1304,31 +1420,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Crea la trayectoria de un objeto de vaciado desde una cara o caras - - - Vertical faces do not form a loop - ignoring - Las caras verticales no forman un ciclo - ignorar - - - - Pocket does not support shape %s.%s - El vaciado no admite la forma %s.%s - - - - Adaptive clearing and profiling - Limpieza y perfilado adaptativo - - - - Pass Extension - Ampliación de pasada - - - - The distance the facing operation will extend beyond the boundary shape. - La distancia de la operación de refrendado se extenderá más allá de la forma límite. - Generating toolpath with libarea offsets. @@ -1344,40 +1435,25 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Utiliza el contorno de la geometría de base. Default length of extensions. - Default length of extensions. + Longitud de extensiones por defecto. List of features to extend. - List of features to extend. + Lista de operaciones a ampliar. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Cuando esta activado las aristas de extensión conectadas se combinan con los cables. @@ -1402,26 +1478,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Perfil basado en la cara o caras - - - Edge Profile - Perfil de arista - - - - Profile based on edges - Perfil basado en los bordes - - - - Face Profile - Perfil de Cara - - - - Profile based on face or faces - Perfil basado en la cara o caras - The tool number in use @@ -1599,12 +1655,62 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Velocidad por defecto para movimientos rápidos horizontales. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Velocidad por defecto para movimientos rápidos verticales. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Velocidad por defecto para movimientos rápidos horizontales. + + + + Default speed for vertical rapid moves. + Velocidad por defecto para movimientos rápidos verticales. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. @@ -1682,20 +1788,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Version %s de plantilla de controlador de trayectoria de herramienta no soportada - Error updating TC: %s Error al actualizar TC: %s - - Error updating TC: %s - Error al actualizar TC: %s + + Unsupported PathToolController template version %s + Version %s de plantilla de controlador de trayectoria de herramienta no soportada @@ -1731,6 +1832,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Por favor seleccione exactamente un objeto trayectoria + + + Creates an array from a selected path + Crear un arreglo desde una trayectoria seleccionada + + + + Please select exactly one path object + Por favor seleccione exactamente un objeto trayectoria + Path_Comment @@ -1790,11 +1901,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Por favor seleccione un objeto de trayectoria - - - Please select a Path object - Por favor seleccione un objeto de trayectoria - Dress-up @@ -1901,36 +2007,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Crear Dogbone Dress-up - - - Edit Dogbone Dress-up - Editar Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Crea un objeto Dogbone Dress-up desde una trayectoria seleccionada - - - - Please select one path object - Por favor seleccione un objeto de trayectoria - - - - The selected object is not a path - El objeto seleccionado no es una trayectoria - - - - Create Dogbone Dress-up - Crear Dogbone Dress-up - Path_DressupDragKnife @@ -1964,36 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Crear disfraz - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifica una trayectoria para agregar acciones de esquina a cuchilla de arrastre - - - - Please select one path object - Por favor seleccione un objeto de trayectoria - - - - The selected object is not a path - El objeto seleccionado no es una trayectoria - - - - Please select a Path object - Por favor seleccione un objeto de trayectoria - - - - Create Dress-up - Crear disfraz - Path_DressupLeadInOut @@ -2012,21 +2058,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Estilo para conducir dentro del camino - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2037,6 +2068,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2050,19 +2091,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Ángulo de rampa. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un objeto de entrada rampa Dress-up desde una trayectoria seleccionada + + + + The base path to modify + La trayectoria base a modificar + + + + Angle of ramp. + Ángulo de rampa. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un objeto de entrada rampa Dress-up desde una trayectoria seleccionada + Path_DressupTag - - - Tag Dress-up - Aspecto de etiquetaje - - - - Creates a Tag Dress-up object from a selected path - Crea un objeto de etiqueta vestir desde una trayectoria seleccionada - The base path to modify @@ -2088,6 +2149,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radio del redondeo de la etiqueta. + + + The base path to modify + La trayectoria base a modificar + + + + Width of tags. + Anchura de las etiquetas. + + + + Tag Dress-up + Aspecto de etiquetaje + + + + Creates a Tag Dress-up object from a selected path + Crea un objeto de etiqueta vestir desde una trayectoria seleccionada + + + + Radius of the fillet for the tag. + Radio del redondeo de la etiqueta. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2124,13 +2230,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objeto de salto de trayectoria - - - Please select one path object - - Por favor seleccione un objeto de trayectoria - - The selected object is not a path @@ -2138,21 +2237,16 @@ If it is necessary to set the FinalDepth manually please select a different oper El objeto seleccionado no es una trayectoria - - - Create Hop - Crear Salto - - - - Creates a Path Hop object - Crea un objeto de salto de trayectoria - Please select one path object Por favor seleccione un objeto de trayectoria + + + Create Hop + Crear Salto + Path_Inspect @@ -2176,6 +2270,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Por favor seleccione exactamente un objeto trayectoria + + + Inspect G-code + Inspeccionar código G + + + + Inspects the G-code contents of a path + Inspecciona los contenidos de un código G de una trayectoria + Path_Job @@ -2245,6 +2349,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Crear un objeto de plano de selección + + + Create a Selection Plane object + Crear un objeto de plano de selección + Path_Post @@ -2309,11 +2418,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. No se encontró un controlador de herramienta. Se usan valores por defecto, lo cual es peligroso. Por favor, añada un controlador de herramienta. - - - No issues detected, {} has passed basic sanity check. - Ningún problema detectado, {} ha pasado la verificación básica de salud. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2334,16 +2438,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Selección de ciclo completo de dos bordes - - - Finish Selecting Loop - Finalizar el bucle seleccionado - - - - Complete loop selection from two edges - Selección de ciclo completo de dos bordes - Path_SetupSheet @@ -2352,11 +2446,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Editar SetupSheet - - - Edit SetupSheet - Editar SetupSheet - Path_SimpleCopy @@ -2377,21 +2466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Crea una copia no-paramétrica de otra trayectoria - - - Simple Copy - Copia simple - - - - Creates a non-parametric copy of another path - Crea una copia no-paramétrica de otra trayectoria - - - - Please select exactly one path object - Por favor seleccione exactamente un objeto trayectoria - Path_Simulator @@ -2405,16 +2479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simular la trayectoria G-Code en stock - - - CAM Simulator - CAM Simulador - - - - Simulate Path G-Code on stock - Simular la trayectoria G-Code en stock - Path_Stop @@ -2447,7 +2511,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Esta operación requiere OpenCamLib para instalarse. - + This operation requires OpenCamLib to be installed. Esta operación requiere OpenCamLib para instalarse. @@ -2493,12 +2557,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Añadir Controlador de Herramienta para el trabajo - + Add Tool Controller to the Job Añadir Controlador de Herramienta para el trabajo - + Add Tool Controller Añadir Controlador de Herramienta @@ -2567,15 +2631,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabla de herramientas LinuxCNC (*.tbl) - + Open tooltable Abierta mesa de herramientas - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Mesa de herramientas XML (*.xml);;mesa de herramientas HeeksCAD (*.tooltable) - Save tooltable @@ -2816,6 +2875,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Mesa de herramientas XML (*.xml);;mesa de herramientas HeeksCAD (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabla de herramientas (*.xml); Tabla de herramientas Linuxcnc (*.tbl) - - PathCustom - - - The gcode to be inserted - El gcode se insertará - - - - The tool controller that will be used to calculate the path - El controlador de la herramienta que se utilizará para calcular la trayectoria - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm index a4863c7799..277ebbbf70 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index b92fbc0589..d262fa4eab 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Planarra: Laua, 3D gainazal eskaneatzea. Birakaria: 4. ardatzeko eskaneatze birakaria. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + Eragiketa osatzeko modua: bakarra edo pasaera anitzekoa The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan edo aurka Clearing pattern to use - Clearing pattern to use + Erabiliko den garbitze-eredua The model will be rotated around this axis. - The model will be rotated around this axis. + Eredua ardatz honen inguruan biratuko da. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Abiarazteko indizea (angelua) biraketa-eskaneatzerako Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Gelditzeko indizea (angelua) biraketa-eskaneatzerako @@ -66,7 +66,7 @@ Z-axis offset from the surface of the object - Z ardatzeko desplazamendua objektuaren azaleratik + Z ardatzeko desplazamendua objektuaren gainazaletik @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ezikusi adierazitako sakoneraren azpitik dauden areak. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Ezikusiko diren hondar-areak identifikatzeko erabiliko den sakonera. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Moztu gehiegizko materiala ereduaren ertzeraino, eredua garbitzeko. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Erabili makinaren ebakigailu-erradioaren konpentsazioa / Tresna-bidearen G41/G42 desplazamendua @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Jantziak DressupStartDepth gaineko mugimendu-komandoak ezikusiko dituen ala ez @@ -203,40 +203,60 @@ Enable pecking Gaitu txirbiltzea - - - Height to clear top of material - Materialaren goiko aldea garbitzeko altuera - - - - Diameters of the holes - Zuloen diametroa - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Zulatze-sakonera hazkorra, txirbilak garbitzeko atzeraka egin baino lehen - Enable pecking Gaitu txirbiltzea - + + Enable dwell + Gaitu itxarotea + + + + Calculate the tip length and subtract from final depth + Kalkulatu puntaren luzera eta egin kenketa azken sakoneratik + + + + Calculate the tip length and subtract from final depth + Kalkulatu puntaren luzera eta egin kenketa azken sakoneratik + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Elikatzea hasten den altuera eta bidea amaituta dagoenean tresna atzeratzen den altuera + + + + Shape to use for calculating Boundary + Muga kalkulatzeko erabiliko den forma + + + Orientation plane of CNC path CNC bidearen orientazio-planoa - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Muga kalkulatzeko erabiliko den forma + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profilatu zulo biribilak - - Orientation plane of CNC path - CNC bidearen orientazio-planoa + + The base object this collision refers to + Talka honek erreferentziatzat duen oinarri-objektua - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profilatu zulo biribilak - - Profile holes as well as the outline - Profilatu zuloak eta eskema + + The base object this collision refers to + Talka honek erreferentziatzat duen oinarri-objektua @@ -309,14 +329,14 @@ Sigi-saga ereduaren angelua - - Maximum distance before a miter join is truncated - Elkartze zorrotz bat trunkatzen hasteko distantzia maximoa + + Percent of cutter diameter to step over on each pass + Igaroaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den - - Extra offset to apply to the operation. Direction is operation dependent. - Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. + + Angle of the zigzag pattern + Sigi-saga ereduaren angelua @@ -329,9 +349,9 @@ Eredu-metodoa - - Angle of the zigzag pattern - Sigi-saga ereduaren angelua + + Add Optional or Mandatory Stop to the program + Gehitu aukerako edo derrigorrezko etena programari @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Aurreratze azkarreko tasa mugimendu horizontaletarako - - - Direction of spindle rotation - Hax-biraketaren norabidea - - - - Feed rate for vertical moves in Z - Elikatze-abiadura Z ardatzeko mugimendu bertikaletarako - - - - Feed rate for horizontal moves - Elikatze-abiadura mugimendu horizontaletarako - The base geometry of this toolpath @@ -526,7 +531,7 @@ The retract height, above top surface of part, between compounded operations inside clamping area - Atzeratze-altuera, piezaren goiko azaleraren gainetik, euste-arearen barruko eragiketa konposatuen artean + Atzeratze-altuera, piezaren goiko gainazalaren gainetik, euste-arearen barruko eragiketa konposatuen artean @@ -561,6 +566,36 @@ Path + + + Edit + Editatu + + + + %s is not a Base Model object of the job %s + %s ez da oinarri-ereduen objektua %s lanerako + + + + Base shape %s already in the list + %s oinarri-forma dagoeneko zerrendan dago + + + + Ignoring vertex + Erpina ezikusten + + + + Edit + Editatu + + + + %s is not a Base Model object of the job %s + %s ez da oinarri-ereduen objektua %s lanerako + Didn't find job %s @@ -587,19 +622,14 @@ %s lan gurasoak ez du oinarri-objekturik - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Mozte-ertzaren angeluak (%.2f) tresna-puntaren luzera negatiboa ematen du - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du @@ -621,6 +651,109 @@ Pick Start Point Aukeratu hasiera-puntua + + + Heights + Altuerak + + + + AreaOp Operation + AreaOp eragiketa + + + + Uncreate AreaOp Operation + Desegin AreaOp eragiketa + + + + Pick Start Point + Aukeratu hasiera-puntua + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Bidea - - - Path Dressup - Bidearen jantzia - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Proiektuaren konfigurazioa - - - - Path Modification - Bidearen aldaketa - - - - Helpful Tools - Tresna lagungarriak - - - - &Path - &Bidea - - - - Path Dressup - Bidearen jantzia - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Editatu - this object already in the list @@ -750,6 +838,14 @@ Sortu profil bat ertz-hautapenean oinarrituta + + PathAdaptive + + + Adaptive + Moldakorra + + PathAreaOp @@ -763,17 +859,45 @@ ez da lanik aurkitu %s eragiketarako. - + job %s has no Base. %s lanak ez du oinarririk. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Txertatuko den gcode-a + + + + The tool controller that will be used to calculate the path + Bidea kalkulatzeko erabiliko den tresna-kontrolatzailea + + + + The gcode to be inserted + Txertatuko den gcode-a + + + + PathDeburr + + + The desired width of the chamfer + Alakarako nahi den zabalera + + + + The additional depth of the tool path + Tresna-bidearen sakonera gehigarria + + + + Deburr + Kendu bizarrak @@ -850,8 +974,8 @@ - Drilling - Zulaketa + Creates a Path Drilling object from a features of a base object + Bidea zulatzeko objektu bat sortzen du oinarri-objektu bateko elementuetatik @@ -869,25 +993,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Grabatuko diren oinarri-objektu gehigarriak - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Grabatu @@ -961,7 +1072,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + Mozketa zirkularren norabidea, erlojuaren orratzen noranzkoan (CW) edo aurkakoan (CCW) @@ -973,26 +1084,11 @@ Start cutting from the inside or outside Hasi mozten barrutik edo kanpotik - - - Creates a Path Helix object from a features of a base object - Helize-bideko objektu bat sortzen du oinarri-objektu bateko elementuetatik - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Hasi mozten barrutik edo kanpotik - - - Radius increment (must be smaller than tool diameter) - Erradio-gehikuntza (tresnaren diametroa baino txikiagoa izan behar du) - PathJob @@ -1022,9 +1118,24 @@ Onartzen ez den %s objektu gordina (%d) - - Stock not from Base bound box! - Pieza gordinak ez dauka oinarriaren muga-kutxa! + + Select the Post Processor + Hautatu post-prozesadorea + + + + Arguments for the Post Processor (specific to the script) + Post-prozesadorerako argumentuak (script-erako espezifikoak) + + + + Stock not a box! + Pieza gordina ez da kutxa bat! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Bideak kalkulatzeko; txikiagoak zehaztasuna handitzen du, baina kalkulua moteltzen du @@ -1042,9 +1153,9 @@ Lan honetarako erabilgarri dauden tresna-kontrolatzaileen bilduma. - - Unsupported stock type %s (%d) - Onartzen ez den %s objektu gordina (%d) + + Select the Post Processor + Hautatu post-prozesadorea @@ -1052,9 +1163,9 @@ Proiektu honen NC irteera-fitxategia - - Select the Post Processor - Hautatu post-prozesadorea + + Arguments for the Post Processor (specific to the script) + Post-prozesadorerako argumentuak (script-erako espezifikoak) @@ -1062,9 +1173,9 @@ Lan honen ezarpenak biltzen dituen konfigurazio-orria - - An optional description for this job - Lan honen aukerako deskribapen bat + + For computing Paths; smaller increases accuracy, but slows down computation + Bideak kalkulatzeko; txikiagoak zehaztasuna handitzen du, baina kalkulua moteltzen du @@ -1107,14 +1218,9 @@ Onartzen ez den pieza gordina - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Oinarria -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Lanak @@ -1144,6 +1250,11 @@ Holds the max Z value of Stock Pieza gordinaren Z balio maximoa du + + + Holds the min Z value of Stock + Pieza gordinaren Z balio minimoa du + Make False, to prevent operation from generating code @@ -1165,9 +1276,9 @@ Eragiketa honetarako oinarri-kokapenak - - Holds the calculated value for the StartDepth - Hasierako sakonerarako kalkulatutako balioari eusten dio + + Holds the calculated value for the FinalDepth + Amaierako sakonerarako kalkulatutako balioari eusten dio @@ -1180,14 +1291,9 @@ Tresnaren azken sakonera - baliorik baxuena Z ardatzean - - Holds the max Z value of Stock - Pieza gordinaren Z balio maximoa du - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Hasierako sakoneraren barneko erabilera soilik balio eratorrietarako @@ -1195,9 +1301,19 @@ Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Eragiketa honetarako aukerako iruzkin bat + + + + User Assigned Label + Erabiltzaileak esleitutako etiketa + + + + Incremental Step Down of Tool + Tresnaren beheratze hazkorra @@ -1214,11 +1330,6 @@ Make True, if specifying a Start Point Markatu 'Egia', hasierako puntu bat adieraziko bada - - - The tool controller that will be used to calculate the path - Bidea kalkulatzeko erabiliko den tresna-kontrolatzailea - Base Geometry @@ -1241,6 +1352,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Depths Sakonerak + + + Make True, if specifying a Start Point + Markatu 'Egia', hasierako puntu bat adieraziko bada + PathPocket @@ -1254,16 +1370,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path 3D Pocket object from a face or faces 3d bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik - - - Vertical faces do not form a loop - ignoring - Aurpegi bertikalek ez dute begizta bat osatzen - ez ikusten - Pocket does not support shape %s.%s Poltsak ez du onartzen %s.%s forma + + + Vertical faces do not form a loop - ignoring + Aurpegi bertikalek ez dute begizta bat osatzen - ez ikusten + Adaptive clearing and profiling @@ -1304,31 +1420,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path Pocket object from a face or faces Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik - - - Vertical faces do not form a loop - ignoring - Aurpegi bertikalek ez dute begizta bat osatzen - ez ikusten - - - - Pocket does not support shape %s.%s - Poltsak ez du onartzen %s.%s forma - - - - Adaptive clearing and profiling - Garbitze eta profilatze moldakorra - - - - Pass Extension - Igaroaldien hedadura - - - - The distance the facing operation will extend beyond the boundary shape. - Aurpegia sortzeko eragiketa hedatuko den distantzia muga-formaz kanpo. - Generating toolpath with libarea offsets. @@ -1344,40 +1435,25 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Oinarri-geometriaren eskema erabiltzen du. Default length of extensions. - Default length of extensions. + Hedapenen luzera lehenetsia. List of features to extend. - List of features to extend. + Hedatuko den elementuen zerrenda. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Gaituta dagoenean, konektatutako hedapenen ertzak konbinatu egiten dira eta hariak sortzen dira. @@ -1402,26 +1478,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Profile based on face or faces Aurpegi batean edo batzuetan oinarritutako profila - - - Edge Profile - Ertz-profila - - - - Profile based on edges - Ertzetan oinarritutako profila - - - - Face Profile - Aurpegi-profila - - - - Profile based on face or faces - Aurpegi batean edo batzuetan oinarritutako profila - The tool number in use @@ -1599,12 +1655,62 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Abiadura lehenetsia mugimendu azkar horizontaletarako. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Abiadura lehenetsia mugimendu azkar bertikaletarako. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Eremu honen erabilera altuera segururako adierazpenaren mendekoa da - modu lehenetsian, balio hori hasierako sakonerari gehitzen zaio eta eragiketa baten altuera segururako erabiltzen da. + + + + Expression set for the SafeHeight of new operations. + Eragiketa berrien altuera segururako erabilitako adierazpena. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Eremu honen erabilera altuera segururako adierazpenaren mendekoa da - modu lehenetsian, balio hori hasierako sakonerari gehitzen zaio eta eragiketa baten altuera segururako erabiltzen da. + + + + Expression set for the ClearanceHeight of new operations. + Eragiketa berrien altuera segururako erabilitako adierazpena. + + + + Default speed for horizontal rapid moves. + Abiadura lehenetsia mugimendu azkar horizontaletarako. + + + + Default speed for vertical rapid moves. + Abiadura lehenetsia mugimendu azkar bertikaletarako. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Eremu honen erabilera altuera segururako adierazpenaren mendekoa da - modu lehenetsian, balio hori hasierako sakonerari gehitzen zaio eta eragiketa baten altuera segururako erabiltzen da. + + + + Expression set for the SafeHeight of new operations. + Eragiketa berrien altuera segururako erabilitako adierazpena. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Eremu honen erabilera altuera segururako adierazpenaren mendekoa da - modu lehenetsian, balio hori hasierako sakonerari gehitzen zaio eta eragiketa baten altuera segururako erabiltzen da. + + + + Expression set for the ClearanceHeight of new operations. + Eragiketa berrien altuera segururako erabilitako adierazpena. @@ -1682,20 +1788,15 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathToolController - - - Unsupported PathToolController template version %s - Onartzen ez den PathToolController txantiloi-bertsioa (%s) - Error updating TC: %s Errorea TC eguneratzean: %s - - Error updating TC: %s - Errorea TC eguneratzean: %s + + Unsupported PathToolController template version %s + Onartzen ez den PathToolController txantiloi-bertsioa (%s) @@ -1731,6 +1832,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Please select exactly one path object Hautatu bide-objektu bakar bat + + + Creates an array from a selected path + Matrize bat sortzen du hautatutako bide batetik + + + + Please select exactly one path object + Hautatu bide-objektu bakar bat + Path_Comment @@ -1790,11 +1901,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Hautatu bide-objektu bat - - - Please select a Path object - Hautatu bide-objektu bat - Dress-up @@ -1901,36 +2007,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Dogbone Dress-up Sortu txakur-hezurraren jantzia - - - Edit Dogbone Dress-up - Editatu txakur-hezurraren jantzia - - - - Dogbone Dress-up - Txakur-hezurraren jantzia - - - - Creates a Dogbone Dress-up object from a selected path - Txakur-hezurraren jantzi-objektu bat sortzen du hautatutako bide bat erabiliz - - - - Please select one path object - Hautatu bide-objektu bat - - - - The selected object is not a path - Hautatutako objektua ez da bide bat - - - - Create Dogbone Dress-up - Sortu txakur-hezurraren jantzia - Path_DressupDragKnife @@ -1964,36 +2040,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Dress-up Sortu jantzia - - - DragKnife Dress-up - Arraste-hortzeko jantzia - - - - Modifies a path to add dragknife corner actions - Bide bat aldatzen du arraste-hortz erako izkina-ekintzak gehitzeko - - - - Please select one path object - Hautatu bide-objektu bat - - - - The selected object is not a path - Hautatutako objektua ez da bide bat - - - - Please select a Path object - Hautatu bide-objektu bat - - - - Create Dress-up - Sortu jantzia - Path_DressupLeadInOut @@ -2005,37 +2051,32 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat The Style of LeadOut the Path - The Style of LeadOut the Path + Bidearen irteera-estiloa The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - Bidearen sarrera-estiloa - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Puntuaren erradio-desplazamenduaren edo erdigunearen modua LeadInOut Dressup - LeadInOut Dressup + Sarrera-irteeraren jantzia Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Ebakigailu-erradioaren konpentsazioaren G41/G42 sarrerako jantzi-objektu bat sortzen du hautatutako bide bat erabilita + + + + LeadInOut Dressup + Sarrera-irteeraren jantzia + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Ebakigailu-erradioaren konpentsazioaren G41/G42 sarrerako jantzi-objektu bat sortzen du hautatutako bide bat erabilita @@ -2050,19 +2091,39 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Angle of ramp. Arrapalaren angelua. + + + RampEntry Dress-up + Arrapala-sarreraren jantzia + + + + Creates a Ramp Entry Dress-up object from a selected path + Arrapala-sarreraren jantzi-objektu bat sortzen du hautatutako bide bat erabiliz + + + + The base path to modify + Aldatuko den oinarri-bidea + + + + Angle of ramp. + Arrapalaren angelua. + + + + RampEntry Dress-up + Arrapala-sarreraren jantzia + + + + Creates a Ramp Entry Dress-up object from a selected path + Arrapala-sarreraren jantzi-objektu bat sortzen du hautatutako bide bat erabiliz + Path_DressupTag - - - Tag Dress-up - Etiketa-jantzia - - - - Creates a Tag Dress-up object from a selected path - Etiketa-jantzi objektu bat sortzen du hautatutako bide bat erabiliz - The base path to modify @@ -2088,6 +2149,51 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Radius of the fillet for the tag. Biribiltze-erradioa etiketarako. + + + The base path to modify + Aldatuko den oinarri-bidea + + + + Width of tags. + Etiketen zabalera. + + + + Tag Dress-up + Etiketa-jantzia + + + + Creates a Tag Dress-up object from a selected path + Etiketa-jantzi objektu bat sortzen du hautatutako bide bat erabiliz + + + + Radius of the fillet for the tag. + Biribiltze-erradioa etiketarako. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2124,13 +2230,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path Hop object Bide-jauziko objektu bat sortzen du - - - Please select one path object - - Hautatu bide-objektu bat - - The selected object is not a path @@ -2138,21 +2237,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Hautatutako objektua ez da bide bat - - - Create Hop - Sortu jauzia - - - - Creates a Path Hop object - Bide-jauziko objektu bat sortzen du - Please select one path object Hautatu bide-objektu bat + + + Create Hop + Sortu jauzia + Path_Inspect @@ -2176,6 +2270,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Please select exactly one path object Hautatu bide-objektu bakar bat + + + Inspect G-code + Ikuskatu G-code edukia + + + + Inspects the G-code contents of a path + Bide baten G-code edukia ikuskatzen du + Path_Job @@ -2245,6 +2349,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create a Selection Plane object Sortu hautapen-plano objektu bat + + + Create a Selection Plane object + Sortu hautapen-plano objektu bat + Path_Post @@ -2309,11 +2418,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Ez da tresna-kontrolatzailerik aurkitu. Balio lehenetsiak erabiliko dira, eta hori arriskutsua da. Mesedez, gehitu tresna-kontrolatzaile bat. - - - No issues detected, {} has passed basic sanity check. - Ez da arazorik detektatu, {} elementuak oinarrizko osasun-egiaztapenak gainditu ditu. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2334,16 +2438,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Complete loop selection from two edges Osatu begizta-hautapena bi ertzetatik - - - Finish Selecting Loop - Amaitu begizta-hautapena - - - - Complete loop selection from two edges - Osatu begizta-hautapena bi ertzetatik - Path_SetupSheet @@ -2352,11 +2446,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Edit SetupSheet Editatu konfigurazio-orria - - - Edit SetupSheet - Editatu konfigurazio-orria - Path_SimpleCopy @@ -2377,21 +2466,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a non-parametric copy of another path Beste bide baten kopia ez parametriko bat sortzen du - - - Simple Copy - Kopia sinplea - - - - Creates a non-parametric copy of another path - Beste bide baten kopia ez parametriko bat sortzen du - - - - Please select exactly one path object - Hautatu bide-objektu bakar bat - Path_Simulator @@ -2405,16 +2479,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Simulate Path G-Code on stock Simulatu G-Code bidea pieza gordinean - - - CAM Simulator - CAM simulatzailea - - - - Simulate Path G-Code on stock - Simulatu G-Code bidea pieza gordinean - Path_Stop @@ -2447,7 +2511,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Eragiketa hau egiteko OpenCamLib instalatu behar da. - + This operation requires OpenCamLib to be installed. Eragiketa hau egiteko OpenCamLib instalatu behar da. @@ -2493,12 +2557,12 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Gehitu tresna-kontrolatzailea lanari - + Add Tool Controller to the Job Gehitu tresna-kontrolatzailea lanari - + Add Tool Controller Gehitu tresna-kontrolatzailea @@ -2526,7 +2590,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat 3D Surface - 3D azalera + 3D gainazala @@ -2536,7 +2600,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat 3D Surface - 3D azalera + 3D gainazala @@ -2567,15 +2631,10 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat LinuxCNC tresna-mahaia (*.tbl) - + Open tooltable Ireki tresna-mahaia - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - XML tresna-mahaia (*.xml);;HeeksCAD tresna-mahaia (*.tooltable) - Save tooltable @@ -2816,6 +2875,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + XML tresna-mahaia (*.xml);;HeeksCAD tresna-mahaia (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat XML tresna-mahaia (*.xml);;LinuxCNC tresna-mahaia (*.tbl) - - PathCustom - - - The gcode to be inserted - Txertatuko den gcode-a - - - - The tool controller that will be used to calculate the path - Bidea kalkulatzeko erabiliko den tresna-kontrolatzailea - - PathDressup_Dogbone @@ -3506,7 +3557,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Surface - Sortu azalera + Sortu gainazala @@ -3746,7 +3797,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat The retract height, above top surface of part, between compounded operations inside clamping area - Atzeratze-altuera, piezaren goiko azaleraren gainetik, euste-arearen barruko eragiketa konposatuen artean + Atzeratze-altuera, piezaren goiko gainazalaren gainetik, euste-arearen barruko eragiketa konposatuen artean diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm index d54e041f31..61fd1a67a1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index 013c1e1077..055f9bb6b9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Reikien halkaisijat + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Muokkaa + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Muokkaa + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Korkeudet + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Muokkaa - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Drilling + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Kaiverra @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Syvyydet + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Rampin kulma. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Rampin kulma. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm index 7cbf874903..78b99c9387 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts index 609a6ddf9d..ba350246cc 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts @@ -204,14 +204,14 @@ Paganahin ang pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Paganahin ang pecking - - Diameters of the holes - Mga diameter ng mga hole + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth bago retracting to malinis chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Paganahin ang pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Ang tugatog kung saan nagsisimula at taas ang feed habang nagtatanggal ng tool kapag natapos na ang landas + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane ng CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ I-profile ang bilog na mga hole - - Orientation plane of CNC path - Orientation plane ng CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + I-profile ang bilog na mga hole - - Profile holes as well as the outline - Mga holes ng profile at pati na rin ng outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angel ng zigzag pattern - - Maximum distance before a miter join is truncated - Maximum na distansya bago ang miter join ay truncated + + Percent of cutter diameter to step over on each pass + Ang porsiyento ng cutter diameter upang mag step over sa bawat pass - - Extra offset to apply to the operation. Direction is operation dependent. - Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon. + + Angle of the zigzag pattern + Angel ng zigzag pattern @@ -329,9 +349,9 @@ Method ng pattern - - Angle of the zigzag pattern - Angel ng zigzag pattern + + Add Optional or Mandatory Stop to the program + Magdagdag ng Opsyonal o Mandatory Stop sa programa @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Mabilis na rate para sa mga horizontal moves - - - Direction of spindle rotation - Direksyon ng pagikot ng spindle - - - - Feed rate for vertical moves in Z - Feed rate para sa mga patayong mga galaw sa Z - - - - Feed rate for horizontal moves - Feed rate para sa mga horizontal na galaw - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + I-edit + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + I-edit + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s walang base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) nagresulta sa negatibong haba ng tool tip - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pumili ng Simulang Point + + + Heights + Taas + + + + AreaOp Operation + Operasyon ng AreaOp + + + + Uncreate AreaOp Operation + Operasyon ng Uncreate AreaOp + + + + Pick Start Point + Pumili ng Simulang Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Setup ng Proyekto - - - - Path Modification - Path Modification - - - - Helpful Tools - Makakatulong na mga Tool - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - I-edit - this object already in the list @@ -751,6 +839,14 @@ Lumikha ng Profile na nakabase sa edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ walang job para sa op %s ang natagpuan. - + job %s has no Base. job %s ay walang Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Ang gcode na dapat i-insert + + + + The tool controller that will be used to calculate the path + Ang controller ng tool na gagamitin para kalkulahin ang path + + + + The gcode to be inserted + Ang gcode na dapat i-insert + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Pag drill + Creates a Path Drilling object from a features of a base object + Lumilikha ng Path Drilling object mula sa mga feature ng base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Simulan ang pag cut mula sa loob o sa labas - - - Creates a Path Helix object from a features of a base object - Lumilikha ng Path Helix object mula sa mga feature ng isang base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Simulan ang pag cut mula sa loob o sa labas - - - Radius increment (must be smaller than tool diameter) - Pagtaas ng Radius (dapat ay mas maliit kaysa sa diameter ng tool) - PathJob @@ -1023,9 +1119,24 @@ Hindi suportadong uri ng stock %s (%d) - - Stock not from Base bound box! - Ang stock ay hindi mula sa Bse bound box! + + Select the Post Processor + Piliin ang Post Processor + + + + Arguments for the Post Processor (specific to the script) + Mga agrumento para sa Post Processor (partikular na nasa script) + + + + Stock not a box! + Ang Stock ay hindi isang box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Koleksyon ng mga controller ng tool na magagamit para sa job na ito. - - Unsupported stock type %s (%d) - Hindi suportadong uri ng stock %s (%d) + + Select the Post Processor + Piliin ang Post Processor @@ -1053,9 +1164,9 @@ Ang NC output file para sa proyektong ito - - Select the Post Processor - Piliin ang Post Processor + + Arguments for the Post Processor (specific to the script) + Mga agrumento para sa Post Processor (partikular na nasa script) @@ -1063,9 +1174,9 @@ SetupSheet na humahawak sa mga setting para sa job na ito - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Hindi suportadong uri ng stock - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Ang mga lokasyon ng base para sa operasyong ito - - Holds the calculated value for the StartDepth - Humahawak sa nakalkulang halaga para sa StartDepth + + Holds the calculated value for the FinalDepth + Humahawak sa nakalkulang halaga para sa FinalDepth @@ -1181,14 +1292,9 @@ Huling lalim ng Tool - pinakamababang halaga sa Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Ang opsyonal na komento para sa Operasyon na ito + + + + User Assigned Label + Naka-assign na Label ng User + + + + Incremental Step Down of Tool + Paunti-unting pag Step down ng Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Gawing totoo, kung tumutukoy sa isang Start Point - - - The tool controller that will be used to calculate the path - Ang controller ng tool na gagamitin para kalkulahin ang path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Mga Lalim + + + Make True, if specifying a Start Point + Gawing totoo, kung tumutukoy sa isang Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Lumilikha ng isang bagay na Bulsang 3D na Landas mula sa isang mukha o mga mukha - - - Vertical faces do not form a loop - ignoring - Ang mukhang Patayo ay hindi bumubuo ng isang silo - hindi pinapansin - Pocket does not support shape %s.%s Ang Bulsa ay hindi suportado ang hugis na %s.%s + + + Vertical faces do not form a loop - ignoring + Ang mukhang Patayo ay hindi bumubuo ng isang silo - hindi pinapansin + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha - - - Vertical faces do not form a loop - ignoring - Ang mukhang Patayo ay hindi bumubuo ng isang silo - hindi pinapansin - - - - Pocket does not support shape %s.%s - Ang Bulsa ay hindi suportado ang hugis na %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - Ang distansya na i-extend ng facing operation lagpas sa hangganan ng hugis. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Profile ng Edge - - - - Profile based on edges - Profile na nakabase sa mga edge - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Hindi suportadong bersyon ng PathToolController template %s - Error updating TC: %s Kamalian sa pag u-update TC: %s - - Error updating TC: %s - Kamalian sa pag u-update TC: %s + + Unsupported PathToolController template version %s + Hindi suportadong bersyon ng PathToolController template %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Lumilikha ng isang array mula sa napiling path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Mangyaring pumili ng isang path object - - - Please select a Path object - Mangyaring pumili ng isang Path Object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Lumikha ng Dogbone Dress-up - - - Edit Dogbone Dress-up - I-edit ang Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Lumikha ng Dogbone Dress-up object mula sa napiling path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Lumikha ng Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Lumikha ng Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Binabago ang path pata magdagdag ng dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Mangyaring pumili ng isang Path Object - - - - Create Dress-up - Lumikha ng Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Ang Estilo ng LeadIn sa Landas - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle ng ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Lumilikha ng Ramp Entry Dress-up object mula sa napiling path + + + + The base path to modify + Ang batayang landas na baguhin + + + + Angle of ramp. + Angle ng ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Lumilikha ng Ramp Entry Dress-up object mula sa napiling path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Lumikha ng Tag Dress-up object mula sa napiling path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius ng fillet para sa tag. + + + The base path to modify + Ang batayang landas na baguhin + + + + Width of tags. + Lapad ng tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Lumikha ng Tag Dress-up object mula sa napiling path + + + + Radius of the fillet for the tag. + Radius ng fillet para sa tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Lumilikha ng Path Hop object - - - Please select one path object - - Mangyaring pumili ng isang path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Ang napiling object ay hindi isang path - - - Create Hop - Lumikha ng Hop - - - - Creates a Path Hop object - Lumilikha ng Path Hop object - Please select one path object Please select one path object + + + Create Hop + Lumikha ng Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspeksyunin ang G-code + + + + Inspects the G-code contents of a path + Iniinspeksyon ang mga nilalaman ng G-code ng isang path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Lumikha ng Selection Plane Object + + + Create a Selection Plane object + Lumikha ng Selection Plane Object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - Walang anumang mga isyu na nakita, {} nakapasa sa pamantayan ng pagsusuri sa kalinisan. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Kumpletong loop selection mula sa dalawang edges - - - Finish Selecting Loop - Tapos na ang pagpili ng Loop - - - - Complete loop selection from two edges - Kumpletong loop selection mula sa dalawang edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Lumilikha ng non-parametric na kopya ng ibang path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Lumilikha ng non-parametric na kopya ng ibang path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Gayahin ang Landas na G-Code sa stock - - - CAM Simulator - Paggaya ng CAM - - - - Simulate Path G-Code on stock - Gayahin ang Landas na G-Code sa stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Idagdag ang Tool Controller sa job - + Add Tool Controller to the Job Idagdag ang Tool Controller sa job - + Add Tool Controller Magdagdag ng Controller ng Tool @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Buksan ang tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - Ang gcode na dapat i-insert - - - - The tool controller that will be used to calculate the path - Ang controller ng tool na gagamitin para kalkulahin ang path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm index 0718834d68..f797dc444b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index 44859146c6..b0e22ddf49 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Planaire : Analyse de surface 3D à plat. Rotatif : Analyse rotative du 4e axe. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + Mode d’achèvement de l’opération : simple ou multi-passes The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Direction que le parcours d’outils doit effectuer autour de la pièce : monter(sens des aiguille d’une montre) ou conventionnel(sens inverse des aiguille d’une montre) Clearing pattern to use - Clearing pattern to use + Effacement du motif à utiliser The model will be rotated around this axis. - The model will be rotated around this axis. + Le modèle sera pivoter autour de cet axe. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Index(angle) de départ pour le balayage en rotation Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Index(angle) d’arrêt pour le balayage en rotation @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignorer les zones qui se trouvent sous la profondeur indiquée. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Profondeur utilisée pour identifier la zone de chute à ignorer. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Couper au travers de la chute jusqu’à la profondeur en bordure du modèle, libérant le modèle. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Utiliser la compensation du rayon d’outil de coupe de la machine /Décalage de chemin d’outil G41/G42 @@ -181,12 +181,12 @@ Custom feedrate - Vitesse d’avance personnalisé + Vitesse d’avance personnalisée Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Si l’habillage doit ignorer les commandes de mouvement au-dessus de DressupStartDepth @@ -203,40 +203,60 @@ Enable pecking Activer le débourrage - - - Height to clear top of material - Hauteur de dégagement par rapport au dessus de la pièce - - - - Diameters of the holes - Diamètre des perçages - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Incrément de profondeur de perçage avant retrait pour enlever les copeaux (débourrage) - Enable pecking Activer le débourrage - + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculer la longueur de l’extrémité et la soustraire de la profondeur finale + + + + Calculate the tip length and subtract from final depth + Calculer la longueur de l’extrémité et la soustraire de la profondeur finale + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé + + + + Shape to use for calculating Boundary + Forme à utiliser pour calculer les limites + + + Orientation plane of CNC path Plan d'orientation du parcours CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Forme à utiliser pour calculer les limites + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profil des trous circulaires - - Orientation plane of CNC path - Plan d'orientation du parcours CNC + + The base object this collision refers to + Objet de base à laquelle se réfère cette collision - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profil des trous circulaires - - Profile holes as well as the outline - Profiler les trous ainsi que le contour + + The base object this collision refers to + Objet de base à laquelle se réfère cette collision @@ -309,14 +329,14 @@ Angle de la fonction ZigZag - - Maximum distance before a miter join is truncated - Distance maximale avant le troncature de la jointure à onglet + + Percent of cutter diameter to step over on each pass + Avance en pourcentage du diamètre de l'outil à chaque passe - - Extra offset to apply to the operation. Direction is operation dependent. - Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante. + + Angle of the zigzag pattern + Angle de la fonction ZigZag @@ -329,9 +349,9 @@ Méthode de l'opération - - Angle of the zigzag pattern - Angle de la fonction ZigZag + + Add Optional or Mandatory Stop to the program + Ajouter une arrêt facultatif ou obligatoire du programme @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Avance rapide horizontale - - - Direction of spindle rotation - Sens de rotation de la fraise - - - - Feed rate for vertical moves in Z - Vitesse d'avancement pour les déplacements verticaux suivant Z - - - - Feed rate for horizontal moves - Vitesse d'avancement pour les déplacements horizontaux - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Éditer + + + + %s is not a Base Model object of the job %s + %s n’est pas un objet Modèle de Base de la tâche %s + + + + Base shape %s already in the list + La forme de base %s se trouve déjà dans la liste + + + + Ignoring vertex + Ignorer le sommet + + + + Edit + Éditer + + + + %s is not a Base Model object of the job %s + %s n’est pas un objet Modèle de Base de la tâche %s + Didn't find job %s @@ -587,19 +622,14 @@ La tâche d'origine %s n’a pas d'objet de base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Angle d'arrête tranchante (%.2f) cause une longueur négative de la pointe de l'outil - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° @@ -621,6 +651,109 @@ Pick Start Point Sélectionner le point de départ + + + Heights + Hauteur + + + + AreaOp Operation + Opération AreaOp + + + + Uncreate AreaOp Operation + Ne pas crée d'opération AreaOp + + + + Pick Start Point + Sélectionner le point de départ + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Parcours - - - Path Dressup - Parcours de la trajectoire additionnelle (Dressup) - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configuration du projet - - - - Path Modification - Modification du parcours - - - - Helpful Tools - Outils utiles - - - - &Path - &Parcours - - - - Path Dressup - Parcours de la trajectoire additionnelle (Dressup) - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Éditer - this object already in the list @@ -751,6 +839,14 @@ Créer un contour basé sur une sélection d'arrêtes + + PathAdaptive + + + Adaptive + Adaptatif + + PathAreaOp @@ -764,17 +860,45 @@ aucun tâche trouvée pour op " %s ". - + job %s has no Base. La tâche %s ne contient aucune pièce - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Le gcode à insérer + + + + The tool controller that will be used to calculate the path + Le contrôleur d’outil qui sera utilisé pour calculer la trajectoire + + + + The gcode to be inserted + Le gcode à insérer + + + + PathDeburr + + + The desired width of the chamfer + Largeur désirée pour le chanfrein + + + + The additional depth of the tool path + Profondeur supplémentaire du parcours d’outil + + + + Deburr + Ébavurer @@ -851,8 +975,8 @@ - Drilling - Perçage + Creates a Path Drilling object from a features of a base object + Crée un objet parcours de Perçage à partir d'une fonction de l'objet de base @@ -870,25 +994,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Objets de base à graver - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Graver @@ -962,7 +1073,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + Direction des coupes circulaires, Sens des aiguilles d’une montre (CW), ou Sens inverse des aiguille d’une montre (CCW) @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Commencer l'usinage de l’intérieur ou l’extérieur - - - Creates a Path Helix object from a features of a base object - Crée un objet percours Helix à partir d'une fonction de l'objet de base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Commencer l'usinage de l’intérieur ou l’extérieur - - - Radius increment (must be smaller than tool diameter) - Incrément de rayon (doit être plus petit que le diamètre de l’outil) - PathJob @@ -1023,9 +1119,24 @@ Type de brut " %s (%d) " non pris en charge - - Stock not from Base bound box! - Le brut ne tient pas dans les bases de la boîte englobante! + + Select the Post Processor + Sélectionner un post-traitement + + + + Arguments for the Post Processor (specific to the script) + Arguments pour le post-processeur (spécifique au script) + + + + Stock not a box! + Le brut n'est pas une boîte ! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Pour le calcul des trajectoires ; plus petite augmente la précision, mais ralentit le calcul @@ -1043,9 +1154,9 @@ Collection des contrôleurs outil disponibles pour cette tâche. - - Unsupported stock type %s (%d) - Type de brut " %s (%d) " non pris en charge + + Select the Post Processor + Sélectionner un post-traitement @@ -1053,9 +1164,9 @@ Le fichier de sortie NC pour ce projet - - Select the Post Processor - Sélectionner un post-traitement + + Arguments for the Post Processor (specific to the script) + Arguments pour le post-processeur (spécifique au script) @@ -1063,9 +1174,9 @@ Fiche de contrôle portant les paramètres pour cette tâche - - An optional description for this job - Une description optionnel pour cette tâche + + For computing Paths; smaller increases accuracy, but slows down computation + Pour le calcul des trajectoires ; plus petite augmente la précision, mais ralentit le calcul @@ -1108,14 +1219,9 @@ Type de brut non pris en charge - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Emplois @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Contient la valeur Z max du Brut + + + Holds the min Z value of Stock + Conserver la valeur min. de Z du brut + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Point de départ de cette opération - - Holds the calculated value for the StartDepth - Contient la valeur calculée pour la StartDepth + + Holds the calculated value for the FinalDepth + Contient la valeur calculée pour la FinalDepth @@ -1181,14 +1292,9 @@ Profondeur finale de l'outil - plus petite valeur dans Z - - Holds the max Z value of Stock - Contient la valeur Z max du Brut - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Utilisation interne de la profondeur de départ uniquement pour les valeurs dérivées @@ -1196,9 +1302,19 @@ Marquer « false », pour empêcher l'opération ne génére du code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Commentaire pour cette opération (facultatif) + + + + User Assigned Label + Label assigné par l'utilisateur + + + + Incremental Step Down of Tool + Incrément de pas de l'outil vers le bas @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Marquer « true » si vous définissez un point de départ - - - The tool controller that will be used to calculate the path - Le contrôleur d’outil qui sera utilisé pour calculer la trajectoire - Base Geometry @@ -1242,6 +1353,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Depths Profondeurs + + + Make True, if specifying a Start Point + Marquer « true » si vous définissez un point de départ + PathPocket @@ -1255,16 +1371,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path 3D Pocket object from a face or faces Crée un objet poche 3D à partir d'arêtes ou d'une surface - - - Vertical faces do not form a loop - ignoring - Surfaces verticales ne forment pas une boucle - ignoré - Pocket does not support shape %s.%s La poche ne prend pas en charge la forme " %s.%s " + + + Vertical faces do not form a loop - ignoring + Surfaces verticales ne forment pas une boucle - ignoré + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path Pocket object from a face or faces Crée un objet poche à partir d'arêtes ou d'une surface - - - Vertical faces do not form a loop - ignoring - Surfaces verticales ne forment pas une boucle - ignoré - - - - Pocket does not support shape %s.%s - La poche ne prend pas en charge la forme " %s.%s " - - - - Adaptive clearing and profiling - Surfaçage et profilage adaptif - - - - Pass Extension - Ajouter une extension - - - - The distance the facing operation will extend beyond the boundary shape. - L’opération de surfaçage ira au-delà de la limite de la surface. - Generating toolpath with libarea offsets. @@ -1345,40 +1436,25 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Utiliser les contours de la géométrie de base. Default length of extensions. - Default length of extensions. + Longueur par défaut des extensions. List of features to extend. - List of features to extend. + Liste des éléments à étendre. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Lorsque ceci est activé les bords des extensions connectées sont combinées en fils. @@ -1403,26 +1479,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Profile based on face or faces Profil basé sur une ou des faces - - - Edge Profile - Profil d'arête - - - - Profile based on edges - Profil basé sur arêtes - - - - Face Profile - Contour de face - - - - Profile based on face or faces - Profil basé sur une ou des faces - The tool number in use @@ -1600,12 +1656,62 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Vitesse par défaut des déplacement horizontaux rapides. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Vitesse par défaut des déplacement verticaux rapides. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + L’utilisation de ce champ dépend de SafeHeightExpression - par défaut sa valeur est ajoutée à StartDepth et utilisée comme SafeHeight d’une opération. + + + + Expression set for the SafeHeight of new operations. + Expression définie pour la valeur SafeHeight des nouvelles opérations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + L'utilisation de ce champ dépend de ClearenceHeightExpression - par défaut, sa valeur est ajoutée à StartDepth et utilisée pour la valeur ClearanceHeight d’une opération. + + + + Expression set for the ClearanceHeight of new operations. + Expression définie pour la valeur ClearanceHeight des nouvelles opérations. + + + + Default speed for horizontal rapid moves. + Vitesse par défaut des déplacement horizontaux rapides. + + + + Default speed for vertical rapid moves. + Vitesse par défaut des déplacement verticaux rapides. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + L’utilisation de ce champ dépend de SafeHeightExpression - par défaut sa valeur est ajoutée à StartDepth et utilisée comme SafeHeight d’une opération. + + + + Expression set for the SafeHeight of new operations. + Expression définie pour la valeur SafeHeight des nouvelles opérations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + L'utilisation de ce champ dépend de ClearenceHeightExpression - par défaut, sa valeur est ajoutée à StartDepth et utilisée pour la valeur ClearanceHeight d’une opération. + + + + Expression set for the ClearanceHeight of new operations. + Expression définie pour la valeur ClearanceHeight des nouvelles opérations. @@ -1683,20 +1789,15 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathToolController - - - Unsupported PathToolController template version %s - Version non prise en charge du modèle PathToolController %s - Error updating TC: %s Erreur de mise à jour des taux: %s - - Error updating TC: %s - Erreur de mise à jour des taux: %s + + Unsupported PathToolController template version %s + Version non prise en charge du modèle PathToolController %s @@ -1732,6 +1833,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Please select exactly one path object Veuillez sélectionner exactement un objet trajectoire + + + Creates an array from a selected path + Crée une séquence à partir d'un parcours sélectionné + + + + Please select exactly one path object + Veuillez sélectionner exactement un objet trajectoire + Path_Comment @@ -1791,11 +1902,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Veuillez sélectionner un objet parcours - - - Please select a Path object - Veuillez sélectionner un object parcours - Dress-up @@ -1902,36 +2008,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create Dogbone Dress-up Créer la trajectoire additionnelle dégagement des angles (Dogbone Dressup) - - - Edit Dogbone Dress-up - Editer la trajectoire additionnelle dégagement des angles (Dogbone) - - - - Dogbone Dress-up - Trajectoire additionnelle Dégagement des angles (Dogbone) - - - - Creates a Dogbone Dress-up object from a selected path - Crée un objet trajectoire additionnelle dégagement des angles (Dogbone) à partir du parccours sélectionné - - - - Please select one path object - Veuillez sélectionner une objet parcours - - - - The selected object is not a path - L'objet sélectionné n'est pas un parcours - - - - Create Dogbone Dress-up - Créer la trajectoire additionnelle dégagement des angles (Dogbone Dressup) - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create Dress-up Créer une trajectoire additionnelle (Dress-up) - - - DragKnife Dress-up - Trajectoire additionnelle couteau tangentiel - - - - Modifies a path to add dragknife corner actions - Modifie un parcours pour ajouter les mouvements d'angle pour couteaux tangentiels - - - - Please select one path object - Veuillez sélectionner une objet parcours - - - - The selected object is not a path - L'objet sélectionné n'est pas un parcours - - - - Please select a Path object - Veuillez sélectionner un object parcours - - - - Create Dress-up - Créer une trajectoire additionnelle (Dress-up) - Path_DressupLeadInOut @@ -2006,22 +2052,7 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - Style du la trajectoire d'approche - - - - The Style of LeadOut the Path - The Style of LeadOut the Path + Style de trajectoire de dégagement @@ -2036,7 +2067,17 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crée une compensation de rayon de coupe G41/G42 Entrée d'une trajectoire additionnelle (dressup) a partir d'une trajectoire sélectionné + + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crée une compensation de rayon de coupe G41/G42 Entrée d'une trajectoire additionnelle (dressup) a partir d'une trajectoire sélectionné @@ -2051,19 +2092,39 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Angle of ramp. Angle de rampe. + + + RampEntry Dress-up + Trajectoire additionnelle rampe d'entrée + + + + Creates a Ramp Entry Dress-up object from a selected path + Crée une trajectoire additionnelle rampe d'entrée depuis le parcours sélectionnée + + + + The base path to modify + Le parcours de base à modifier + + + + Angle of ramp. + Angle de rampe. + + + + RampEntry Dress-up + Trajectoire additionnelle rampe d'entrée + + + + Creates a Ramp Entry Dress-up object from a selected path + Crée une trajectoire additionnelle rampe d'entrée depuis le parcours sélectionnée + Path_DressupTag - - - Tag Dress-up - Étiquette de trajectoire additionnelle - - - - Creates a Tag Dress-up object from a selected path - Crée un objet étiquette de trajectoire additionnelle depuis le parcours sélectionné - The base path to modify @@ -2089,6 +2150,51 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Radius of the fillet for the tag. Rayon du filet pour l'étiquette. + + + The base path to modify + Le parcours de base à modifier + + + + Width of tags. + Largeur des étiquettes. + + + + Tag Dress-up + Étiquette de trajectoire additionnelle + + + + Creates a Tag Dress-up object from a selected path + Crée un objet étiquette de trajectoire additionnelle depuis le parcours sélectionné + + + + Radius of the fillet for the tag. + Rayon du filet pour l'étiquette. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path Hop object Crée un object saut - - - Please select one path object - - Veuillez sélectionner un objet parcours - - The selected object is not a path @@ -2139,21 +2238,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un L'objet sélectionné n'est pas un parcours - - - Create Hop - Crée un saut - - - - Creates a Path Hop object - Crée un object saut - Please select one path object Veuillez sélectionner une objet parcours + + + Create Hop + Crée un saut + Path_Inspect @@ -2177,6 +2271,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Please select exactly one path object Veuillez sélectionner exactement un objet trajectoire + + + Inspect G-code + Inspecter le G-code + + + + Inspects the G-code contents of a path + Inspecte le G-code d'un parcours + Path_Job @@ -2246,6 +2350,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create a Selection Plane object Crée un objet plan de sélection + + + Create a Selection Plane object + Crée un objet plan de sélection + Path_Post @@ -2310,11 +2419,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Aucun outil contrôleur trouvé. Des valeurs par défaut sont utilisées, ce qui est dangereux. Veuillez ajouter un outil contrôleur. - - - No issues detected, {} has passed basic sanity check. - Aucun problème détecté, {} a passé une vérification basique. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Complete loop selection from two edges Boucle de sélection complète à partir de deux bords - - - Finish Selecting Loop - Termine la boucle de selection - - - - Complete loop selection from two edges - Boucle de sélection complète à partir de deux bords - Path_SetupSheet @@ -2353,11 +2447,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Edit SetupSheet Modifier SetupSheet - - - Edit SetupSheet - Modifier SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a non-parametric copy of another path Crée une copie non paramétrique d'un autre parcours - - - Simple Copy - Copie simple - - - - Creates a non-parametric copy of another path - Crée une copie non paramétrique d'un autre parcours - - - - Please select exactly one path object - Veuillez sélectionner exactement un objet trajectoire - Path_Simulator @@ -2406,16 +2480,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Simulate Path G-Code on stock Simuler le chemin G-Code dans la matière - - - CAM Simulator - Simulateur FAO - - - - Simulate Path G-Code on stock - Simuler le chemin G-Code dans la matière - Path_Stop @@ -2448,7 +2512,7 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Cette opération nécessite l'installation d'OpenCamLib. - + This operation requires OpenCamLib to be installed. Cette opération nécessite l'installation d'OpenCamLib. @@ -2494,12 +2558,12 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Ajouter un contrôleur d’outil à la tâche - + Add Tool Controller to the Job Ajouter un contrôleur d’outil à la tâche - + Add Tool Controller Ajouter un contrôleur d'outil @@ -2568,15 +2632,10 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Table d'outils LinuxCNC (*.tbl) - + Open tooltable Ouvre la table des outils - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Table d'outils XML (*.xml);;Table d'outils LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - Le gcode à insérer - - - - The tool controller that will be used to calculate the path - Le contrôleur d’outil qui sera utilisé pour calculer la trajectoire - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm index 662c1d573e..bb8895a582 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index 4bb24dccac..8afb6d4406 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Planar: Dixitalización de superficies planas 3D. Rotación: explotación rotativa 4 eixe. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + O modo de completado para operación: sinxelo ou pase múltiple The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + A dirección que a traxectoria da ferramenta debe ir ao redor da parte: Climb(ClockWise) ou Conventional(CounterClockWise) Clearing pattern to use - Clearing pattern to use + Patrón de limpado a usar The model will be rotated around this axis. - The model will be rotated around this axis. + O modelo pode rotar ao redor do eixe. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Iniciar índice (ángulo) para dixitalización rotacional Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Parar índice(ángulo) para dixitalización rotacional @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignorar áreas que se desenrolan abaixo a profundidade especificada. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de restos a ignorar. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Tallar os restos na profundidade no bordo do modelo, liberando o modelo. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Usar Compensación de Radio de Tallada da Máquina /Compensación Traxectoria Ferramenta G41/G42 @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Debe a máscara ignorar comandos de movemento sobre DressupStartDepth @@ -203,40 +203,60 @@ Enable pecking Habilitar pecking - - - Height to clear top of material - Altura para limpar a parte superior de material - - - - Diameters of the holes - Diámetros dos buratos - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Fondura de tradeado incrementar antes de retraerse para limpar as labras - Enable pecking Habilitar pecking - + + Enable dwell + Habilitar espera + + + + Calculate the tip length and subtract from final depth + Calcula a lonxitude da pista e sustrae dende a profundidade final + + + + Calculate the tip length and subtract from final depth + Calcula a lonxitude da pista e sustrae dende a profundidade final + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + A altura onde arrinca o avance e mais a altura onde a ferramenta se retrae cando a traxectoria está rematada + + + + Shape to use for calculating Boundary + Forma a usar para calcular o Contorno + + + Orientation plane of CNC path Orientación do plano de traxectoria CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Forma a usar para calcular o Contorno + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Perfil de buratos redondos - - Orientation plane of CNC path - Orientación do plano de traxectoria CNC + + The base object this collision refers to + O obxecto base desta colisión refírese a - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Perfil de buratos redondos - - Profile holes as well as the outline - Perfilar buratos así como a súa contorna + + The base object this collision refers to + O obxecto base desta colisión refírese a @@ -309,14 +329,14 @@ Ángulo do patrón zigzag - - Maximum distance before a miter join is truncated - Distancia máxima antes de que unha unión de inglete esté truncada + + Percent of cutter diameter to step over on each pass + Porcentaxe do diámetro da fresa para entrar no material en cada pasaxe - - Extra offset to apply to the operation. Direction is operation dependent. - Desfase extra para aplicar a operación. A dirección é dependente da operación. + + Angle of the zigzag pattern + Ángulo do patrón zigzag @@ -329,9 +349,9 @@ Método de patrón - - Angle of the zigzag pattern - Ángulo do patrón zigzag + + Add Optional or Mandatory Stop to the program + Engadir unha Parada, obrigatoria ou opcional, ó programa @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Relación de avance para movementos horizontais - - - Direction of spindle rotation - Sentido de xiro do fuso - - - - Feed rate for vertical moves in Z - Relación de avance para movementos verticais en Z - - - - Feed rate for horizontal moves - Taxa de avance para movementos horizontais - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s non é un obxecto de Modelo Base do traballo %s + + + + Base shape %s already in the list + A Forma Base %s xa na lista + + + + Ignoring vertex + Ignorar vértice + + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s non é un obxecto de Modelo Base do traballo %s + Didn't find job %s @@ -587,19 +622,14 @@ O traballo %s non ten un obxecto base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Ángulo do borde de corte (%.2f) resultado en lonxitude negativa da punta da ferramenta - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° @@ -621,6 +651,109 @@ Pick Start Point Escolmar punto de arrinque + + + Heights + Alturas + + + + AreaOp Operation + Operación AreaOp + + + + Uncreate AreaOp Operation + Elimina Operación de AreaOp + + + + Pick Start Point + Escolmar punto de arrinque + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Traxectoria - - - Path Dressup - Revestir traxectoria - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configuración do proxecto - - - - Path Modification - Modificación da traxectoria - - - - Helpful Tools - Ferramentas útiles - - - - &Path - &Traxectoria - - - - Path Dressup - Revestir traxectoria - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Editar - this object already in the list @@ -751,6 +839,14 @@ Crear un perfil baseado na escolma dun bordo + + PathAdaptive + + + Adaptive + Adaptable + + PathAreaOp @@ -764,17 +860,45 @@ ningún traballo para %s atopado. - + job %s has no Base. o traballo %s non ten Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + O gcode para ser inserido + + + + The tool controller that will be used to calculate the path + Controlador da ferramenta que se usará para calcular a traxectoria + + + + The gcode to be inserted + O gcode para ser inserido + + + + PathDeburr + + + The desired width of the chamfer + A largura desexada do chaflán + + + + The additional depth of the tool path + Profundidade adicional da traxectoria da ferramenta + + + + Deburr + Desbarbeado @@ -851,8 +975,8 @@ - Drilling - Tradeado + Creates a Path Drilling object from a features of a base object + Crea un obxecto de Perforación de Traxectoria a partir dunha característica dun obxecto base @@ -870,25 +994,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Obxectos base adicionais que deben gravarse - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Gravando @@ -962,7 +1073,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + A dirección de corte circular, sentido horario (CW) ou ante horario (CCW) @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Principiar cortando dende o interior ou o exterior - - - Creates a Path Helix object from a features of a base object - Crea un obxecto de Perforación Helicoidal a partir dunha característica dun obxecto - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Principiar cortando dende o interior ou o exterior - - - Radius increment (must be smaller than tool diameter) - Incremento de raio (debe ser menor ca o diámetro da ferramenta) - PathJob @@ -1023,9 +1119,24 @@ Tipo de stock non soportado %s (%d) - - Stock not from Base bound box! - Stock non dende caixa atada á Base! + + Select the Post Processor + Escolme o pos-procesador + + + + Arguments for the Post Processor (specific to the script) + Argumentos para o pos-procesador (específico para o script) + + + + Stock not a box! + Non unha caixa de existencias! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Para Rutas de computación; canto máis pequenas aumentan a precisión, pero é máis lenta a computación @@ -1043,9 +1154,9 @@ Colección de controladores de ferramentas dispoñibles para este traballo. - - Unsupported stock type %s (%d) - Tipo de stock non soportado %s (%d) + + Select the Post Processor + Escolme o pos-procesador @@ -1053,9 +1164,9 @@ O ficheiro de saída NC para este proxecto - - Select the Post Processor - Escolme o pos-procesador + + Arguments for the Post Processor (specific to the script) + Argumentos para o pos-procesador (específico para o script) @@ -1063,9 +1174,9 @@ SetupSheet mantendo os axustes para este traballo - - An optional description for this job - Unha descrición opcional para este traballo + + For computing Paths; smaller increases accuracy, but slows down computation + Para Rutas de computación; canto máis pequenas aumentan a precisión, pero é máis lenta a computación @@ -1108,14 +1219,9 @@ Tipo de existencia non soportado - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Traballos @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Manter o valor máximo de Z de Stock + + + Holds the min Z value of Stock + Manter o valor mínimo de Z de Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Posición base para esta operación - - Holds the calculated value for the StartDepth - Contén o valor calculado para StartDepth + + Holds the calculated value for the FinalDepth + Contén o valor calculado para FinalDepth @@ -1181,14 +1292,9 @@ Fondura final da ferramenta - valor máis baixo en Z - - Holds the max Z value of Stock - Manter o valor máximo de Z de Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Iniciar uso interno Depth so para valores derivados @@ -1196,9 +1302,19 @@ Facer Falso, para impedir a operación dende o código xerado - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Un comentario opcional para esta Operación + + + + User Assigned Label + Etiqueta Asinada a Usuario + + + + Incremental Step Down of Tool + Paso incrementar da ferramenta cara baixo @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Facer verdadeiro, se se especifica un punto de principio - - - The tool controller that will be used to calculate the path - Controlador da ferramenta que se usará para calcular a traxectoria - Base Geometry @@ -1242,6 +1353,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Depths Profundidades + + + Make True, if specifying a Start Point + Facer verdadeiro, se se especifica un punto de principio + PathPocket @@ -1255,16 +1371,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path 3D Pocket object from a face or faces Crea un obxecto Traxectoria 3D baleiro dende unha face ou faces - - - Vertical faces do not form a loop - ignoring - As caras verticais non forman un ciclo - ignorando - Pocket does not support shape %s.%s O baleirado non soporta formas %s.%s + + + Vertical faces do not form a loop - ignoring + As caras verticais non forman un ciclo - ignorando + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path Pocket object from a face or faces Crea un obxecto Traxectoria baleiro dende unha face ou faces - - - Vertical faces do not form a loop - ignoring - As caras verticais non forman un ciclo - ignorando - - - - Pocket does not support shape %s.%s - O baleirado non soporta formas %s.%s - - - - Adaptive clearing and profiling - Limpeza e perfilado adaptativo - - - - Pass Extension - Extensión de Paso - - - - The distance the facing operation will extend beyond the boundary shape. - A distancia da operación de refrentado se extenderá máis alá da forma límite. - Generating toolpath with libarea offsets. @@ -1345,40 +1436,25 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Usar a contorna da base xeométrica. Default length of extensions. - Default length of extensions. + Lonxitude por defecto de extensións. List of features to extend. - List of features to extend. + Lista de características a estender. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Cando habilita o bordo da extensión conecta combinando arames. @@ -1403,26 +1479,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Profile based on face or faces Perfil baseado en face ou faces - - - Edge Profile - Perfil de bordo - - - - Profile based on edges - Perfil baseado en bordos - - - - Face Profile - Perfil de face - - - - Profile based on face or faces - Perfil baseado en face ou faces - The tool number in use @@ -1600,12 +1656,62 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Velocidade por defecto para movementos rápidos horizontais. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Velocidade por defecto para movementos verticais rápidos. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + O uso deste campo depende da SafeheightExpression - por defecto este valor está engadido a StartDepth e usado para SafeHeight nunha operación. + + + + Expression set for the SafeHeight of new operations. + Conxunto de expresións para o SafeHeight de novas operacións. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + O uso desde campo depende en ClearanceHeightExpression - por defecto este valor é engadido a StartDepth e usado para ClearanceHeight dunha operación. + + + + Expression set for the ClearanceHeight of new operations. + Conxunto de expresións para o ClearanceHeight de novas operacións. + + + + Default speed for horizontal rapid moves. + Velocidade por defecto para movementos rápidos horizontais. + + + + Default speed for vertical rapid moves. + Velocidade por defecto para movementos verticais rápidos. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + O uso deste campo depende da SafeheightExpression - por defecto este valor está engadido a StartDepth e usado para SafeHeight nunha operación. + + + + Expression set for the SafeHeight of new operations. + Conxunto de expresións para o SafeHeight de novas operacións. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + O uso desde campo depende en ClearanceHeightExpression - por defecto este valor é engadido a StartDepth e usado para ClearanceHeight dunha operación. + + + + Expression set for the ClearanceHeight of new operations. + Conxunto de expresións para o ClearanceHeight de novas operacións. @@ -1683,20 +1789,15 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathToolController - - - Unsupported PathToolController template version %s - Plantilla PathToolController non soportada versión %s - Error updating TC: %s Error ao actualizar TC: %s - - Error updating TC: %s - Error ao actualizar TC: %s + + Unsupported PathToolController template version %s + Plantilla PathToolController non soportada versión %s @@ -1732,6 +1833,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Please select exactly one path object Fai o favor de escolmar exactamente unha traxectoria obxecto + + + Creates an array from a selected path + Fai un arranxo a partir dunha traxectoria escolmada + + + + Please select exactly one path object + Fai o favor de escolmar exactamente unha traxectoria obxecto + Path_Comment @@ -1791,11 +1902,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Por favor, escolme un obxecto traxectoria - - - Please select a Path object - Por favor, escolme un obxecto traxectoria - Dress-up @@ -1902,36 +2008,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create Dogbone Dress-up Crea un aspecto de óso de can - - - Edit Dogbone Dress-up - Editar aspecto de óso de can - - - - Dogbone Dress-up - Aspecto de óso de can - - - - Creates a Dogbone Dress-up object from a selected path - Crea un obxecto con aspecto óso de can dunha traxectoria escollida - - - - Please select one path object - Por favor, escolme un obxecto traxectoria - - - - The selected object is not a path - O obxecto escolmado non é unha traxectoria - - - - Create Dogbone Dress-up - Crea un aspecto de óso de can - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create Dress-up Crear aspecto - - - DragKnife Dress-up - Aspecto coitelo arrastrado - - - - Modifies a path to add dragknife corner actions - Modifica un percorrido para engadir accións de coitelo arrastrado na esquina - - - - Please select one path object - Por favor, escolme un obxecto traxectoria - - - - The selected object is not a path - O obxecto escolmado non é unha traxectoria - - - - Please select a Path object - Por favor, escolme un obxecto traxectoria - - - - Create Dress-up - Crear aspecto - Path_DressupLeadInOut @@ -2006,37 +2052,32 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc The Style of LeadOut the Path - The Style of LeadOut the Path + Estilo de LeadOut na Traxectoria The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - O estilo de Leadln na traxectoria - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Modo de Punto de Compensación de Radio ou Centro LeadInOut Dressup - LeadInOut Dressup + Máscara LeadInOut Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crea unha Compensación de Radio de Tallada G41/G42 Máscara de obxecto dende unha traxectoria escolmada + + + + LeadInOut Dressup + Máscara LeadInOut + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crea unha Compensación de Radio de Tallada G41/G42 Máscara de obxecto dende unha traxectoria escolmada @@ -2051,19 +2092,39 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Angle of ramp. Ángulo da rampa. + + + RampEntry Dress-up + Aspecto da EntradaRampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un obxecto de tipo de aspecto de EntradaRampa desde unha vía de acceso escolmada + + + + The base path to modify + A traxectoria base para modificar + + + + Angle of ramp. + Ángulo da rampa. + + + + RampEntry Dress-up + Aspecto da EntradaRampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un obxecto de tipo de aspecto de EntradaRampa desde unha vía de acceso escolmada + Path_DressupTag - - - Tag Dress-up - Aspecto de Etiqueta - - - - Creates a Tag Dress-up object from a selected path - Crea un obxecto de tipo aspecto de etiqueta desde unha ruta escolmada - The base path to modify @@ -2089,6 +2150,51 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Radius of the fillet for the tag. Radio do filete para a etiqueta. + + + The base path to modify + A traxectoria base para modificar + + + + Width of tags. + Largura das etiquetas. + + + + Tag Dress-up + Aspecto de Etiqueta + + + + Creates a Tag Dress-up object from a selected path + Crea un obxecto de tipo aspecto de etiqueta desde unha ruta escolmada + + + + Radius of the fillet for the tag. + Radio do filete para a etiqueta. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path Hop object Crea un obxecto salto de traxectoria - - - Please select one path object - - Por favor, escolme un obxecto traxectoria - - The selected object is not a path @@ -2139,21 +2238,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc O obxecto escollido non é unha traxectoria - - - Create Hop - Crear Salto - - - - Creates a Path Hop object - Crea un obxecto salto de traxectoria - Please select one path object Por favor, escolme un obxecto traxectoria + + + Create Hop + Crear Salto + Path_Inspect @@ -2177,6 +2271,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Please select exactly one path object Fai o favor de escolmar exactamente unha traxectoria obxecto + + + Inspect G-code + Inspeccionar G-code + + + + Inspects the G-code contents of a path + Inspecciona os contidos do G-code dunha traxectoria + Path_Job @@ -2246,6 +2350,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create a Selection Plane object Crear un obxecto Escolma de plano + + + Create a Selection Plane object + Crear un obxecto Escolma de plano + Path_Post @@ -2310,11 +2419,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Non se atopou un controlador de ferramenta. Úsanse valores por defecto, o que é perigoso. Por favor, engada un controlador de ferramenta. - - - No issues detected, {} has passed basic sanity check. - Ningún problema detectado, {} pasou a comprobación básica de saúde. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Complete loop selection from two edges Completar a escolma de ciclo de dous bordos - - - Finish Selecting Loop - Rematar o ciclo escolmado - - - - Complete loop selection from two edges - Completar a escolma de ciclo de dous bordos - Path_SetupSheet @@ -2353,11 +2447,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Edit SetupSheet Editar SetupSheet - - - Edit SetupSheet - Editar SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a non-parametric copy of another path Crea unha copia non-paramétrica de outra traxectoria - - - Simple Copy - Copia simple - - - - Creates a non-parametric copy of another path - Crea unha copia non-paramétrica de outra traxectoria - - - - Please select exactly one path object - Fai o favor de escolmar exactamente unha traxectoria obxecto - Path_Simulator @@ -2406,16 +2480,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Simulate Path G-Code on stock Simular Ruta G-Code en stock - - - CAM Simulator - CAM Simulador - - - - Simulate Path G-Code on stock - Simular Ruta G-Code en stock - Path_Stop @@ -2448,7 +2512,7 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Esta operación require instalar OpenCamLib. - + This operation requires OpenCamLib to be installed. Esta operación require instalar OpenCamLib. @@ -2494,12 +2558,12 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Engadir Controlador de Ferramenta para o traballo - + Add Tool Controller to the Job Engadir Controlador de Ferramenta para o traballo - + Add Tool Controller Engadir Controlador de Ferramenta @@ -2568,15 +2632,10 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Táboa de ferramentas LinuxCNC (*.tbl) - + Open tooltable Abrir táboa de ferramentas - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Táboa de ferramentas XML (*.xml);;táboa de ferramentas HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Táboa de ferramentas XML (*.xml);;táboa de ferramentas HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Táboa de ferramentas (*.xml); Táboa de ferramentas Linuxcnc (*.tbl) - - PathCustom - - - The gcode to be inserted - O gcode para ser inserido - - - - The tool controller that will be used to calculate the path - Controlador da ferramenta que se usará para calcular a traxectoria - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm index 3b44505157..cd250f721c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index d1a8343fcf..95afcd6f25 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Promjeri rupa + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orijentacijska ravnina CNC-putanje - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profil okrugle rupe - - Orientation plane of CNC path - Orijentacijska ravnina CNC-putanje + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profil okrugle rupe - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Metoda uzorka - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -366,27 +386,12 @@ Rapid rate for vertical moves in Z - Brzi pomak za okomito Z kretanje + Pomak brzog hoda za okomito kretanje (Z) Rapid rate for horizontal moves - Brzi pomak za vodoravno kretanje - - - - Direction of spindle rotation - Smjer rotacije vretena glodala - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves + Pomak brzog hoda za vodoravno kretanje @@ -471,7 +476,7 @@ Rapid Safety Height between locations. - Za Brzo sigurna visina između lokacija. + Sigurna visina brzog hoda između lokacija. @@ -561,6 +566,36 @@ Path + + + Edit + Uredi + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Uredi + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Odaberite početnu točku + + + Heights + Visine + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Odaberite početnu točku + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Put - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Projekt - Podešavanje - - - - Path Modification - Izmjene puta - - - - Helpful Tools - Korisni Alati - - - - &Path - &Put - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Uredi - this object already in the list @@ -751,6 +839,14 @@ Stvaranje profila na bazi odabira ruba + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ nema posla za operaciju %s. - + job %s has no Base. posao %s je bez baze. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Gcode koji če biti umetnut + + + + The tool controller that will be used to calculate the path + Alat kontroler koji će se koristiti za izračunavanje puta + + + + The gcode to be inserted + Gcode koji če biti umetnut + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Bušenje + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Graviranje @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Počinjem glodanje od iznutra prema vani - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Počinjem glodanje od iznutra prema vani - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Nije podržan tip osnove %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Osnova nije kvadar! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Nije podržan tip osnove %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - Dodatni opis za ovaj posao + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Baza-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Poslovi @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Početna lokacija za ovu operaciju - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,14 +1302,24 @@ Postavite na netočno da spriječite generiranje koda - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool Rapid Safety Height between locations. - Za Brzo sigurna visina između lokacija. + Sigurna visina brzog hoda između lokacija. @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - Alat kontroler koji će se koristiti za izračunavanje puta - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Dubine + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pređi produžetak - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1391,7 +1467,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on edges - Profile based on edges + Put baziran na rubovima @@ -1401,27 +1477,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces - Profile based on face or faces - - - - Edge Profile - Profil ruba - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces + Put baziran na licu ili licima @@ -1462,7 +1518,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertexes are not supported - Vertexes are not supported + Vrhovi nisu podržani @@ -1477,7 +1533,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertexes are not supported - Vertexes are not supported + Vrhovi nisu podržani @@ -1521,7 +1577,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select at least one Drillable Location - Please select at least one Drillable Location + Odaberite barem jednu poziciju za bušenje @@ -1567,7 +1623,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Amount of material to leave - Amount of material to leave + Količina ostatka materijala @@ -1600,13 +1656,63 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Zadana brzina za vodoravni brzi hod. Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Zadana brzina za vodoravni brzi hod. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Odaberite samo jedan objekt puta - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Napravi proširenje - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Napravi proširenje - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Širina oznake. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Stvori objekt puta prijelaza - - - Please select one path object - - Odaberite samo jedan objekt puta - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Stvori prijelaz - - - - Creates a Path Hop object - Stvori objekt puta prijelaza - Please select one path object Please select one path object + + + Create Hop + Stvori prijelaz + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Provjeri G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Jednostavno kopiranje - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - Gcode koji če biti umetnut - - - - The tool controller that will be used to calculate the path - Alat kontroler koji će se koristiti za izračunavanje puta - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm index 71e415ca18..16a66eb634 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index 8294d24198..c831db83fd 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Síkbeli: Lapos, 3D felület letapogatás. Forgatás: 4-tengelyes forgató letapogatás. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + A művelet befejezési módja: egy vagy több-áthaladású The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Szerszámmozgás irányának a tárgy körül kell lennie: Mászó(Óramutató járásával egyező(Cw)) vagy agyományos(Ellentétes(Ccw)) Clearing pattern to use - Clearing pattern to use + Felhasznált tisztázó minta The model will be rotated around this axis. - The model will be rotated around this axis. + A modellt ezen tengely köröl forgatjuk. Start index(angle) for rotational scan - Start index(angle) for rotational scan + A körforgó letapogatás kezdő indexe (szöge) Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + A körforgó letapogatás végpont indexe (szöge) @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Hagyja figyelmen kívül azokat a területeket, amelyek a megadott mélység alatt haladnak. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Hulladékterületek figyelmen kívül hagyáshoz használt mélység. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Átvág a hulladékon a mélységgel a modell élénél, a modell kiadásához. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Gépi vágás sugár kompenzáció használata /Eszköz útvonal eltolás G41/G42 @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + BeállIndulásiMélység előtt a felépítő megállíthatja a mozgási parancsot @@ -203,40 +203,60 @@ Enable pecking Vagdosás engedélyezése - - - Height to clear top of material - Anyag tetejének tisztításához használt magasság - - - - Diameters of the holes - Lyukak átmérője - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Fogásmélység Q értéke forgács eltávolításhoz - Enable pecking Vagdosás engedélyezése - + + Enable dwell + Pihentetés engedélyezése + + + + Calculate the tip length and subtract from final depth + Kiszámítja a csúcs hosszát, és levonja a végső mélységből + + + + Calculate the tip length and subtract from final depth + Kiszámítja a csúcs hosszát, és levonja a végső mélységből + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Megközelítési pont, R pont + + + + Shape to use for calculating Boundary + Határ számításához használandó alakzat + + + Orientation plane of CNC path Munkasík kiválasztása a CNC programhoz - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Határ számításához használandó alakzat + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Kerek lyukak profilmarója - - Orientation plane of CNC path - Munkasík kiválasztása a CNC programhoz + + The base object this collision refers to + Az alap objektum mely erre az ütközésre hivatkozik - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Kerek lyukak profilmarója - - Profile holes as well as the outline - Felület furatokat, valamint a körvonalat + + The base object this collision refers to + Az alap objektum mely erre az ütközésre hivatkozik @@ -309,14 +329,14 @@ Cikk-cakk minta szöge - - Maximum distance before a miter join is truncated - Maximális távolság, mielőtt a ferde illesztés csonkul + + Percent of cutter diameter to step over on each pass + Maró átmérő százaléka mellyel átlép minden elhaladáskor - - Extra offset to apply to the operation. Direction is operation dependent. - Extra eltolása a művelethez. Iránya a függ a művelettől. + + Angle of the zigzag pattern + Cikk-cakk minta szöge @@ -329,9 +349,9 @@ Mintázó mód - - Angle of the zigzag pattern - Cikk-cakk minta szöge + + Add Optional or Mandatory Stop to the program + Feltételes, vagy programozott állj hozzáadása @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Gyors ütem a vízszintes előtoláshoz - - - Direction of spindle rotation - Főorsó forgásiránya - - - - Feed rate for vertical moves in Z - Függőleges Z tengely előtolás - - - - Feed rate for horizontal moves - Vízszintes irányú előtolási sebesség - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Szerkesztés + + + + %s is not a Base Model object of the job %s + %s nem egy alap modell objektuma ennek a feladatnak: %s + + + + Base shape %s already in the list + %s alap alakzat már szerepel a listában + + + + Ignoring vertex + Végpont figyelmen kívül hagyása + + + + Edit + Szerkesztés + + + + %s is not a Base Model object of the job %s + %s nem egy alap modell objektuma ennek a feladatnak: %s + Didn't find job %s @@ -587,19 +622,14 @@ Szülő feladat %s nem rendelkezik alap objektummal - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Forgácsoló él szög (%.2f) eredménye negatív szerszám csúcs hossz - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie @@ -621,6 +651,109 @@ Pick Start Point Válasszon indulási pontot + + + Heights + Magasságok + + + + AreaOp Operation + AreaOp művelet + + + + Uncreate AreaOp Operation + Megsemmisített AreaOp művelet + + + + Pick Start Point + Válasszon indulási pontot + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path Szerszámpálya - - - Path Dressup - Szerszámpálya felépítés - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Projekt telepítő beállító - - - - Path Modification - Szerszámpálya módosítása - - - - Helpful Tools - Hasznos eszközök - - - - &Path - Szerszámpálya - - - - Path Dressup - Szerszámpálya felépítés - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Szerkesztés - this object already in the list @@ -751,6 +839,14 @@ Hozzon létre egy profilt a kiválasztott él alapján + + PathAdaptive + + + Adaptive + Adaptív + + PathAreaOp @@ -764,17 +860,45 @@ %s művelethez nem található feladat. - + job %s has no Base. %s feladatnak nincs alapja. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + A beillesztendő gcode + + + + The tool controller that will be used to calculate the path + Útvonal kiszámításához használt eszköz vezérlő + + + + The gcode to be inserted + A beillesztendő gcode + + + + PathDeburr + + + The desired width of the chamfer + A letörés kívánt szélessége + + + + The additional depth of the tool path + További mélység az eszköz nyomvonalán + + + + Deburr + Szálkátlanítás @@ -851,8 +975,8 @@ - Drilling - Fúrás + Creates a Path Drilling object from a features of a base object + Fúrási útvonalat hoz létre az alap objektum egy jellegzetességéből @@ -870,25 +994,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Kiegészítő alap tárgyakat kell bevésni - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Gravírtű @@ -962,7 +1073,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + Körkivágás iránya, óramutató járásával megegyező irányban (CW), vagy az óramutató járásával ellentétes irányban (CCW) @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Kivágás kezdése belülről vagy kívülről - - - Creates a Path Helix object from a features of a base object - Spirál útvonalat hoz létre az alap objektum egy jellegzetességéből - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Kivágás kezdése belülről vagy kívülről - - - Radius increment (must be smaller than tool diameter) - Rádiusz-növekmény (szerszám átmérőnél kisebbnek kell lennie) - PathJob @@ -1023,9 +1119,24 @@ Nem támogatott alaptest típus %s (%d) - - Stock not from Base bound box! - Alaptest nem az alapértelmezetthez kötött listából! + + Select the Post Processor + Válassza ki az utólagos végrehajtót + + + + Arguments for the Post Processor (specific to the script) + Érvek az utólagos végrehajtóhoz (jellemző a scripthez) + + + + Stock not a box! + Alaptest nem egy téglatest! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Útvonalak számításához; kevésbé növeli a pontosságot, de lelassítja a számítást @@ -1043,9 +1154,9 @@ Ehhez a munkához elérhető eszköz vezérlők gyűjteménye. - - Unsupported stock type %s (%d) - Nem támogatott alaptest típus %s (%d) + + Select the Post Processor + Válassza ki az utólagos végrehajtót @@ -1053,9 +1164,9 @@ Ennek a projekt témának a kimeneti NC fájlja - - Select the Post Processor - Válassza ki az utólagos végrehajtót + + Arguments for the Post Processor (specific to the script) + Érvek az utólagos végrehajtóhoz (jellemző a scripthez) @@ -1063,9 +1174,9 @@ Ehhez a munkához tartozó beállításokat tartalmazó beállítólap - - An optional description for this job - Egy lehetséges leírás ehhez a feladathoz + + For computing Paths; smaller increases accuracy, but slows down computation + Útvonalak számításához; kevésbé növeli a pontosságot, de lelassítja a számítást @@ -1108,14 +1219,9 @@ Nem támogatott alaptest típus - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Kiindulás -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Feladatok @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Tartja az alaptest max Z értékét + + + Holds the min Z value of Stock + Tartja az alaptest min Z értékét + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Kiinduló hely ehhez a művelethez - - Holds the calculated value for the StartDepth - Megtartja a kiindulási-mélység számított értékét + + Holds the calculated value for the FinalDepth + Megtartja a végső-mélység számított értékét @@ -1181,14 +1292,9 @@ Vég-fúrásmélység a Z tengelyen - - Holds the max Z value of Stock - Tartja az alaptest max Z értékét - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Kezdeti mélység belső használatára, csak származtatott értékekhez használja @@ -1196,9 +1302,19 @@ Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Választható megjegyzés ehhez a művelethez + + + + User Assigned Label + Felhasználó által hozzárendelt címke + + + + Incremental Step Down of Tool + Visszaléptetés növekménye ehhez szerszámhoz @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Állítsa igazra, ha egy kiinduló pontot ad meg - - - The tool controller that will be used to calculate the path - Útvonal kiszámításához használt eszköz vezérlő - Base Geometry @@ -1242,6 +1353,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Depths Mélység + + + Make True, if specifying a Start Point + Állítsa igazra, ha egy kiinduló pontot ad meg + PathPocket @@ -1255,16 +1371,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path 3D Pocket object from a face or faces Létrehoz egy szerszámpálya 3D zseb útvonal objektumot egy felületből vagy felületekből - - - Vertical faces do not form a loop - ignoring - Függőleges felületek nem alkotnak egy ismétlést - figyelmen kívül hagyva - Pocket does not support shape %s.%s Zseb nem támogatja ezt az alakzatot %s.%s + + + Vertical faces do not form a loop - ignoring + Függőleges felületek nem alkotnak egy ismétlést - figyelmen kívül hagyva + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path Pocket object from a face or faces Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből - - - Vertical faces do not form a loop - ignoring - Függőleges felületek nem alkotnak egy ismétlést - figyelmen kívül hagyva - - - - Pocket does not support shape %s.%s - Zseb nem támogatja ezt az alakzatot %s.%s - - - - Adaptive clearing and profiling - Alkalmazkodó tisztázás és profilírozás (profilkialakítás) - - - - Pass Extension - Áthalad a meghosszabbításon - - - - The distance the facing operation will extend beyond the boundary shape. - A távolság a szemben állók műveletére túlnyúlik az alakzat határán. - Generating toolpath with libarea offsets. @@ -1345,40 +1436,25 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Használja az alap geometria körvonalát. Default length of extensions. - Default length of extensions. + Meghosszabbítások alapértelmezett hossza. List of features to extend. - List of features to extend. + Tulajdonságok listája a meghosszabbításhoz. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Ha az engedélyezett akkor a csatlakoztatott hosszabbított éleket vezetékekké fűzi. @@ -1403,26 +1479,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Profile based on face or faces Felületen vagy felületeken alapuló profil - - - Edge Profile - Él profil - - - - Profile based on edges - Éleken alapuló felület - - - - Face Profile - Felület profil - - - - Profile based on face or faces - Felületen vagy felületeken alapuló profil - The tool number in use @@ -1600,12 +1656,62 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Alapértelmezett sebesség a vízszintes irányú, gyors mozgásokhoz. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Alapértelmezett sebesség a függőleges irányú, gyors mozogásokhoz. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Ennek a mezőnek a használata függ a SafeHeightExpression kiterjesztésen - alapértelmezetten az értékéhez hozzáadódik a StartDepth és egy műveletben felhasználja ehhez: SafeHeight. + + + + Expression set for the SafeHeight of new operations. + Kifejezés megadása az új BiztonságiMagasság műveletekhez. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Ennek a mezőnek a használata függ a ClearanceHeightExpression kiterjesztésen - alapértelmezetten az értékéhez hozzáadódik a StartDepth és egy műveletben felhasználja ehhez: ClearanceHeight. + + + + Expression set for the ClearanceHeight of new operations. + Kifejezés megadása az új BiztonságiMagasság műveletekhez. + + + + Default speed for horizontal rapid moves. + Alapértelmezett sebesség a vízszintes irányú, gyors mozgásokhoz. + + + + Default speed for vertical rapid moves. + Alapértelmezett sebesség a függőleges irányú, gyors mozogásokhoz. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Ennek a mezőnek a használata függ a SafeHeightExpression kiterjesztésen - alapértelmezetten az értékéhez hozzáadódik a StartDepth és egy műveletben felhasználja ehhez: SafeHeight. + + + + Expression set for the SafeHeight of new operations. + Kifejezés megadása az új BiztonságiMagasság műveletekhez. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Ennek a mezőnek a használata függ a ClearanceHeightExpression kiterjesztésen - alapértelmezetten az értékéhez hozzáadódik a StartDepth és egy műveletben felhasználja ehhez: ClearanceHeight. + + + + Expression set for the ClearanceHeight of new operations. + Kifejezés megadása az új BiztonságiMagasság műveletekhez. @@ -1683,20 +1789,15 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathToolController - - - Unsupported PathToolController template version %s - Nem támogatott eszköz vezérlő útvonal sablon változat %s - Error updating TC: %s Frissítési hiba TC: %s - - Error updating TC: %s - Frissítési hiba TC: %s + + Unsupported PathToolController template version %s + Nem támogatott eszköz vezérlő útvonal sablon változat %s @@ -1732,6 +1833,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Please select exactly one path object Kérem, pontosan egy szerszámpálya objektumot jelöljön ki + + + Creates an array from a selected path + A kijelölt szerszámpálya útvonalból egy tömböt hoz létre + + + + Please select exactly one path object + Kérem, pontosan egy szerszámpálya objektumot jelöljön ki + Path_Comment @@ -1791,11 +1902,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Jelöljön ki egy pálya objektumot - - - Please select a Path object - Kérem válasszon egy pályaútvonal objektumot - Dress-up @@ -1902,36 +2008,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create Dogbone Dress-up Kutyacsont felépítés létrehozása - - - Edit Dogbone Dress-up - Kutyacsont felépítés szerkesztése - - - - Dogbone Dress-up - Kutyacsont felépítés - - - - Creates a Dogbone Dress-up object from a selected path - Létrehoz egy kutyacsont felépítésű objektumot a kiválasztott útvonalból - - - - Please select one path object - Kérem jelöljön ki egy pálya objektumot - - - - The selected object is not a path - A kijelölt objektum nem pálya útvonal - - - - Create Dogbone Dress-up - Kutyacsont felépítés létrehozása - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create Dress-up Változtatást hoz létre - - - DragKnife Dress-up - DragKnife felépítés - - - - Modifies a path to add dragknife corner actions - Módosít egy szerszámpályát egy dragknife sarok művelet hozzáadásával - - - - Please select one path object - Kérem jelöljön ki egy pálya objektumot - - - - The selected object is not a path - A kijelölt objektum nem pálya útvonal - - - - Please select a Path object - Kérem válasszon egy pályaútvonal objektumot - - - - Create Dress-up - Változtatást hoz létre - Path_DressupLeadInOut @@ -2006,37 +2052,32 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy The Style of LeadOut the Path - The Style of LeadOut the Path + Útvonal kivezetés stílusa The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - Útvonal bevezetés stílusa - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Sugár eltolási pont vagy középponti mód LeadInOut Dressup - LeadInOut Dressup + LeadInOut felépítés Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Létrehoz egy vágó sugár kompenzációt G41/G42 Belépő felépítő objektumot hoz létre egy kijelölt útról + + + + LeadInOut Dressup + LeadInOut felépítés + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Létrehoz egy vágó sugár kompenzációt G41/G42 Belépő felépítő objektumot hoz létre egy kijelölt útról @@ -2051,19 +2092,39 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Angle of ramp. Rámpa szöge. + + + RampEntry Dress-up + Szerszám pálya megváltoztatás + + + + Creates a Ramp Entry Dress-up object from a selected path + Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból + + + + The base path to modify + A megváltoztatni kívánt alap pálya útvonal + + + + Angle of ramp. + Rámpa szöge. + + + + RampEntry Dress-up + Szerszám pálya megváltoztatás + + + + Creates a Ramp Entry Dress-up object from a selected path + Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból + Path_DressupTag - - - Tag Dress-up - Címke megváltoztatás - - - - Creates a Tag Dress-up object from a selected path - Címke módosító objektumot hoz létre a kiválasztott útvonalból - The base path to modify @@ -2089,6 +2150,51 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Radius of the fillet for the tag. Címke lekerekítési sugara. + + + The base path to modify + A megváltoztatni kívánt alap pálya útvonal + + + + Width of tags. + Címkék szélessége. + + + + Tag Dress-up + Címke megváltoztatás + + + + Creates a Tag Dress-up object from a selected path + Címke módosító objektumot hoz létre a kiválasztott útvonalból + + + + Radius of the fillet for the tag. + Címke lekerekítési sugara. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path Hop object Gyorsmenet beszúrása a visszahúzási síkra - - - Please select one path object - - Jelöljön ki egy pálya objektumot - - The selected object is not a path @@ -2139,21 +2238,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy A kijelölt objektum nem pálya útvonal - - - Create Hop - Visszahúzási útszakasz hozzáadása - - - - Creates a Path Hop object - Gyorsmenet beszúrása a visszahúzási síkra - Please select one path object Kérem jelöljön ki egy pálya objektumot + + + Create Hop + Visszahúzási útszakasz hozzáadása + Path_Inspect @@ -2177,6 +2271,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Please select exactly one path object Kérem, pontosan egy szerszámpálya objektumot jelöljön ki + + + Inspect G-code + G-kód ellenőrzése + + + + Inspects the G-code contents of a path + Ellenőrzi a szerszámpálya útvonal G-kód tartalmát + Path_Job @@ -2246,6 +2350,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create a Selection Plane object Megmunkálási sík létrehozása + + + Create a Selection Plane object + Megmunkálási sík létrehozása + Path_Post @@ -2310,11 +2419,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Egy eszköz vezérlő nem található. Alapértelmezett értékeket használnak, amely veszélyes. Kérjük, adjon hozzá eszköz vezérlőt. - - - No issues detected, {} has passed basic sanity check. - Nem eredményezett problémát, {} alapvető ellenőrzésen átment. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Complete loop selection from two edges Hurok kiválasztás befejezése két élből - - - Finish Selecting Loop - Befejezés ismétlés kiválasztása - - - - Complete loop selection from two edges - Hurok kiválasztás befejezése két élből - Path_SetupSheet @@ -2353,11 +2447,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Edit SetupSheet Beállítólap szerkesztése - - - Edit SetupSheet - Beállítólap szerkesztése - Path_SimpleCopy @@ -2378,21 +2467,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a non-parametric copy of another path Másik szerszámpálya útvonalról egy nem-paraméteres másolatot készít - - - Simple Copy - Egyszerű másolás - - - - Creates a non-parametric copy of another path - Másik szerszámpálya útvonalról egy nem-paraméteres másolatot készít - - - - Please select exactly one path object - Kérem, pontosan egy szerszámpálya objektumot jelöljön ki - Path_Simulator @@ -2406,16 +2480,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Simulate Path G-Code on stock Szimulálni G-kód állomány útvonalát - - - CAM Simulator - CAM szimulátor - - - - Simulate Path G-Code on stock - Szimulálni G-kód állomány útvonalát - Path_Stop @@ -2448,7 +2512,7 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Ehhez a művelethez OpenCamLib kell telepíteni. - + This operation requires OpenCamLib to be installed. Ehhez a művelethez OpenCamLib kell telepíteni. @@ -2494,12 +2558,12 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Eszköz vezérlő hozzáadása a munkához - + Add Tool Controller to the Job Eszköz vezérlő hozzáadása a munkához - + Add Tool Controller Eszköz vezérlő hozzáadása @@ -2568,15 +2632,10 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy LinuxCNC szerszámlista (*.tbl) - + Open tooltable Szerszámlista megnyitása - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Szerszámlista XML (*.xml);; HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Szerszámlista XML (*.xml);; HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Szerszámlista XML (*.xml); LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - A beillesztendő gcode - - - - The tool controller that will be used to calculate the path - Útvonal kiszámításához használt eszköz vezérlő - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.qm b/src/Mod/Path/Gui/Resources/translations/Path_id.qm index 0a5c4ccf4d..341a6fd2e3 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_id.qm and b/src/Mod/Path/Gui/Resources/translations/Path_id.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index 56518a50dc..89a2e26cb9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -204,14 +204,14 @@ Aktifkan pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Aktifkan pecking - - Diameters of the holes - Diameter lubang + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Kedalaman drill inkremental sebelum menarik ke clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Aktifkan pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Tinggi tempat pakan mulai dan tinggi saat alat ditarik saat jalan selesai + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientasi pesawat dari CNC jalan - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profil lubang bundar - - Orientation plane of CNC path - Orientasi pesawat dari CNC jalan + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profil lubang bundar - - Profile holes as well as the outline - Lubang profil serta garis besar + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Sudut dari pola zigzag - - Maximum distance before a miter join is truncated - Jarak maksimal sebelum penggabung bergabung dipotong + + Percent of cutter diameter to step over on each pass + Persentase diameter pemotong untuk mengimbangi setiap lintasan - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi. + + Angle of the zigzag pattern + Sudut dari pola zigzag @@ -329,9 +349,9 @@ Metode pola - - Angle of the zigzag pattern - Sudut dari pola zigzag + + Add Optional or Mandatory Stop to the program + Tambahkan Opsional atau Wajib Berhenti ke program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Kecepatan cepat untuk gerakan horisontal - - - Direction of spindle rotation - Arah putaran poros - - - - Feed rate for vertical moves in Z - Tingkat umpan untuk gerakan vertikal di Z - - - - Feed rate for horizontal moves - Tingkat umpan untuk gerakan horisontal - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Edit + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Edit + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Pekerjaan orang tua % s tidak memiliki objek dasar - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) menghasilkan ujung alat negatif - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pilih Start Point + + + Heights + Heights + + + + AreaOp Operation + Operasi AreaOp + + + + Uncreate AreaOp Operation + Operasi Tanpa Sampah + + + + Pick Start Point + Pilih Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path & Jalur - - - Path Dressup - Jalan dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Setup Proyek - - - - Path Modification - Path Modification - - - - Helpful Tools - Alat Bermanfaat - - - - &Path - & Jalur - - - - Path Dressup - Jalan dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Edit - this object already in the list @@ -749,6 +837,14 @@ Buat Profil berdasarkan seleksi tepi + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -762,17 +858,45 @@ tidak ada pekerjaan untuk op % s ditemukan - + job %s has no Base. job % s tidak memiliki Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Kode gantung yang akan dimasukkan + + + + The tool controller that will be used to calculate the path + Pengontrol alat yang akan digunakan untuk menghitung lintasan + + + + The gcode to be inserted + Kode gantung yang akan dimasukkan + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -848,8 +972,8 @@ - Drilling - Pengeboran + Creates a Path Drilling object from a features of a base object + Membuat objek Pengeboran Jalan dari fitur objek dasar @@ -869,23 +993,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Mengukir @@ -971,26 +1082,11 @@ Start cutting from the inside or outside Mulailah memotong dari dalam atau luar - - - Creates a Path Helix object from a features of a base object - Membuat objek Path Helix dari fitur objek dasar - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Mulailah memotong dari dalam atau luar - - - Radius increment (must be smaller than tool diameter) - Peningkatan radius (harus lebih kecil dari diameter alat ) - PathJob @@ -1020,9 +1116,24 @@ Tidak didukung saham jenis % s ( % d ) - - Stock not from Base bound box! - Stok bukan dari kotak Base bound! + + Select the Post Processor + Pilih Post Processor + + + + Arguments for the Post Processor (specific to the script) + Argumen untuk Prosesor Post (khusus untuk naskah) + + + + Stock not a box! + Stok bukan kotak! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1040,9 +1151,9 @@ Kumpulan alat pengontrol tersedia untuk pekerjaan ini. - - Unsupported stock type %s (%d) - Tidak didukung saham jenis % s ( % d ) + + Select the Post Processor + Pilih Post Processor @@ -1050,9 +1161,9 @@ File keluaran NC untuk proyek ini - - Select the Post Processor - Pilih Post Processor + + Arguments for the Post Processor (specific to the script) + Argumen untuk Prosesor Post (khusus untuk naskah) @@ -1060,9 +1171,9 @@ SetupSheet memegang pengaturan untuk pekerjaan ini - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1105,14 +1216,9 @@ Tidak didukung saham jenis - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base - / + % .2f / % .2f % .2f / % .2f % .2f / % .2f + + Jobs + Jobs @@ -1142,6 +1248,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1163,9 +1274,9 @@ Lokasi dasar untuk operasi ini - - Holds the calculated value for the StartDepth - Pegang nilai yang dihitung untuk StartDepth + + Holds the calculated value for the FinalDepth + Pegang nilai yang dihitung untuk FinalDepth @@ -1178,14 +1289,9 @@ Kedalaman Nilai Tool-terendah di Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1193,9 +1299,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Komentar opsional untuk Operasi ini + + + + User Assigned Label + Label yang Ditugaskan Pengguna + + + + Incremental Step Down of Tool + Langkah Tambahan dari Alat @@ -1212,11 +1328,6 @@ Make True, if specifying a Start Point Buat Benar, jika menentukan Titik Awal - - - The tool controller that will be used to calculate the path - Pengontrol alat yang akan digunakan untuk menghitung lintasan - Base Geometry @@ -1239,6 +1350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Kedalaman + + + Make True, if specifying a Start Point + Buat Benar, jika menentukan Titik Awal + PathPocket @@ -1252,16 +1368,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1302,31 +1418,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - Jarak yang dihadapinya akan melampaui bentuk batas. - Generating toolpath with libarea offsets. @@ -1342,11 +1433,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1367,16 +1453,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1400,26 +1476,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Profil Ujung - - - - Profile based on edges - Profil berdasarkan tepi - - - - Face Profile - Profil Wajah - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1604,6 +1660,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1680,20 +1786,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Versi template PathToolController yang tidak didukung % s - Error updating TC: %s Kesalahan saat memperbarui TC: % s - - Error updating TC: %s - Kesalahan saat memperbarui TC: % s + + Unsupported PathToolController template version %s + Versi template PathToolController yang tidak didukung % s @@ -1729,6 +1830,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Menciptakan sebuah array dari sebuah dipilih jalan + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1787,11 +1898,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Silahkan pilih satu objek jalan - - - Please select a Path object - Silahkan pilih objek Path - Dress-up @@ -1898,36 +2004,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Buat Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Menciptakan dogbone Dress-up objek dari suatu dipilih jalan - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Buat Dogbone Dress-up - Path_DressupDragKnife @@ -1961,36 +2037,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Buat Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Mengubah jalur untuk menambahkan tindakan pojok dragknife - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Silahkan pilih objek Path - - - - Create Dress-up - Buat Dress-up - Path_DressupLeadInOut @@ -2009,21 +2055,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2034,6 +2065,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2047,19 +2088,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Sudut jalan + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Menciptakan Ramp Masuk Dress-up objek dari suatu dipilih jalan + + + + The base path to modify + Basis path untuk memodifikasi + + + + Angle of ramp. + Sudut jalan + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Menciptakan Ramp Masuk Dress-up objek dari suatu dipilih jalan + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Membuat objek Tag Dress-up dari jalur yang dipilih - The base path to modify @@ -2085,6 +2146,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius fillet untuk tag . + + + The base path to modify + Basis path untuk memodifikasi + + + + Width of tags. + Lebar tag. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Membuat objek Tag Dress-up dari jalur yang dipilih + + + + Radius of the fillet for the tag. + Radius fillet untuk tag . + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2121,33 +2227,22 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Membuat Jalur Hop objek - - - Please select one path object - - Silahkan pilih satu objek jalan - The selected object is not a path The dipilih objek bukan jalan - - - Create Hop - Buat Hop - - - - Creates a Path Hop object - Membuat Jalur Hop objek - Please select one path object Please select one path object + + + Create Hop + Buat Hop + Path_Inspect @@ -2171,6 +2266,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Periksa kode G + + + + Inspects the G-code contents of a path + Memeriksa isi kode G dari jalur + Path_Job @@ -2241,6 +2346,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Buat Seleksi Pesawat objek + + + Create a Selection Plane object + Buat Seleksi Pesawat objek + Path_Post @@ -2305,11 +2415,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2329,16 +2434,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Selesaikan seleksi loop dari dua sisi - - - Finish Selecting Loop - Selesai Memilih Loop - - - - Complete loop selection from two edges - Selesaikan seleksi loop dari dua sisi - Path_SetupSheet @@ -2347,11 +2442,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2372,21 +2462,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Membuat salinan non-parametrik dari jalur lain - - - Simple Copy - Salinan Sederhana - - - - Creates a non-parametric copy of another path - Membuat salinan non-parametrik dari jalur lain - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2400,16 +2475,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2442,7 +2507,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2487,12 +2552,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Tambahkan Alat Pengontrol ke Ayub - + Add Tool Controller to the Job Tambahkan Alat Pengontrol ke Ayub - + Add Tool Controller Tambahkan Alat Pengontrol @@ -2561,15 +2626,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable LinuxCNC (*.tbl) - + Open tooltable Buka tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (* .xml) ;, HeeksCAD tooltable (* .tooltable) - Save tooltable @@ -2810,6 +2870,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (* .xml) ;, HeeksCAD tooltable (* .tooltable) + Object not found @@ -2826,19 +2891,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (* .xml) ;; LinuxCNC tooltable (* .tbl) - - PathCustom - - - The gcode to be inserted - Kode gantung yang akan dimasukkan - - - - The tool controller that will be used to calculate the path - Pengontrol alat yang akan digunakan untuk menghitung lintasan - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.qm b/src/Mod/Path/Gui/Resources/translations/Path_it.qm index 98adc92a5e..13a1236e42 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_it.qm and b/src/Mod/Path/Gui/Resources/translations/Path_it.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 94aa81a304..3a265d6040 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Pianare: Flat, scansione 3D della superficie. Rotazionale: scansione 4° asse di rotazione. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + La modalità di completamento per l'operazione: singolo o multi-pass The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direzione percorsa dall'utensile intorno alla parte: CW se in senso orario o CCW se in senso antiorario Clearing pattern to use - Clearing pattern to use + Modello di pulizia da usare The model will be rotated around this axis. - The model will be rotated around this axis. + Il modello sarà ruotato attorno a questo asse. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Avvia indice (angolo) per la scansione di rotazione Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Interrompi indice (angolo) per la scansione di rotazione @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignora le aree che sono al di sotto della profondità specificata. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Profondità utilizzata per identificare le aree di scarto da ignorare. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Taglia lo scarto alla profondità a bordo modello, liberando il modello. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Usa Compensazione del raggio di taglio della macchina / Offset percorso utensile G41/G42 @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Nella mascheratura ignorare i comandi di movimento al di sopra di DressupStartDepth @@ -203,40 +203,60 @@ Enable pecking Abilita pecking - - - Height to clear top of material - Altezza per pulire la parte superiore del materiale - - - - Diameters of the holes - Diametri dei fori - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Incremento della profondità di foratura prima del ritorno per scaricare i trucioli - Enable pecking Abilita pecking - + + Enable dwell + Attiva la pausa + + + + Calculate the tip length and subtract from final depth + Calcola la lunghezza della punta e la sottrae dalla profondità finale + + + + Calculate the tip length and subtract from final depth + Calcola la lunghezza della punta e la sottrae dalla profondità finale + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + L'altezza a cui inizia l'avanzamento e l'altezza durante l'allontanamento dell'utensile a fine percorso + + + + Shape to use for calculating Boundary + Forma da utilizzare per calcolare il contorno + + + Orientation plane of CNC path Orientamento del piano di lavoro del percorso CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Forma da utilizzare per calcolare il contorno + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profila i fori rotondi - - Orientation plane of CNC path - Orientamento del piano di lavoro del percorso CNC + + The base object this collision refers to + L'oggetto base a cui si riferisce questo conflitto - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profila i fori rotondi - - Profile holes as well as the outline - Disegna fori con contorno + + The base object this collision refers to + L'oggetto base a cui si riferisce questo conflitto @@ -309,14 +329,14 @@ Angolo di zigzag - - Maximum distance before a miter join is truncated - Distanza massima prima che il giunto di mitra (45°) sia troncato + + Percent of cutter diameter to step over on each pass + Percentuale del diametro dell'utensile da sovrapporre alla passata precedente - - Extra offset to apply to the operation. Direction is operation dependent. - Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione. + + Angle of the zigzag pattern + Angolo di zigzag @@ -326,12 +346,12 @@ Pattern method - Metodo di generazione della schiera + Metodo di generazione della serie - - Angle of the zigzag pattern - Angolo di zigzag + + Add Optional or Mandatory Stop to the program + Aggiunge una sosta obbligatoria o facoltativa al programma @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Velocità di avanzamento rapido per gli spostamenti orizzontali - - - Direction of spindle rotation - Direzione di rotazione del mandrino - - - - Feed rate for vertical moves in Z - Velocità di avanzamento per i movimenti verticali in Z - - - - Feed rate for horizontal moves - Velocità di avanzamento per gli spostamenti orizzontali - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Modifica + + + + %s is not a Base Model object of the job %s + %s non è un oggetto del Modello Base della lavorazione %s + + + + Base shape %s already in the list + Forma base %s già nell'elenco + + + + Ignoring vertex + Ignora il vertice + + + + Edit + Modifica + + + + %s is not a Base Model object of the job %s + %s non è un oggetto del Modello Base della lavorazione %s + Didn't find job %s @@ -587,19 +622,14 @@ La lavorazione derivante %s non ha un oggetto di base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + L'angolo di taglio (%.2f) risulta negativo nella lunghezza della punta dello strumento - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° @@ -621,6 +651,109 @@ Pick Start Point Scegli il punto iniziale + + + Heights + Altezze + + + + AreaOp Operation + Operazione AreaOp + + + + Uncreate AreaOp Operation + Elimina l'operazione AreaOp + + + + Pick Start Point + Scegli il punto iniziale + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Percorso - - - Path Dressup - Vesti percorso - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Imposta Progetto - - - - Path Modification - Modifica Percorso - - - - Helpful Tools - Strumenti utili - - - - &Path - &Percorso - - - - Path Dressup - Vesti percorso - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Modifica - this object already in the list @@ -751,6 +839,14 @@ Crea un profilo basato sulla selezione del bordo + + PathAdaptive + + + Adaptive + Adattivo + + PathAreaOp @@ -764,17 +860,45 @@ nessun lavoro trovato per op %s. - + job %s has no Base. il lavoro %s non ha Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Il gcode da inserire + + + + The tool controller that will be used to calculate the path + Il controllore di strumento da usare per calcolare il percorso + + + + The gcode to be inserted + Il gcode da inserire + + + + PathDeburr + + + The desired width of the chamfer + La larghezza desiderata dello smusso + + + + The additional depth of the tool path + Profondità addizionale del percorso utensile + + + + Deburr + Sbavare @@ -851,8 +975,8 @@ - Drilling - Foratura + Creates a Path Drilling object from a features of a base object + Crea un oggetto Percorso di foratura da una funzionalità di un oggetto di base @@ -870,25 +994,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Ulteriori oggetti base da incidere - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Incisione @@ -962,7 +1073,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + La direzione dei tagli circolari, in senso orario (CW), o in senso antiorario (CCW) @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Iniziare il taglio dall'interno o dall'esterno - - - Creates a Path Helix object from a features of a base object - Crea un oggetto Percorso elicoidale da una funzionalità di un oggetto di base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Iniziare il taglio dall'interno o dall'esterno - - - Radius increment (must be smaller than tool diameter) - Incremento di raggio (deve essere più piccolo del diametro dell'utensile) - PathJob @@ -1023,9 +1119,24 @@ Tipo di oggetto pezzo base non supportato %s (%d) - - Stock not from Base bound box! - L'oggetto pezzo base non appartiene all'elenco predefinito! + + Select the Post Processor + Seleziona il Post processore + + + + Arguments for the Post Processor (specific to the script) + Argomenti per il Post processore (specifici per lo script) + + + + Stock not a box! + L'oggetto pezzo base non è un parallelepipedo! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Per calcolare i Percorsi: più piccolo incrementa la precisione, ma rallenta il calcolo @@ -1043,9 +1154,9 @@ Insieme dei controller degli utensili disponibili per questa lavorazione. - - Unsupported stock type %s (%d) - Tipo di oggetto pezzo base non supportato %s (%d) + + Select the Post Processor + Seleziona il Post processore @@ -1053,9 +1164,9 @@ Il file di output NC per questo progetto - - Select the Post Processor - Seleziona il Post processore + + Arguments for the Post Processor (specific to the script) + Argomenti per il Post processore (specifici per lo script) @@ -1063,9 +1174,9 @@ Tabella delle impostazioni con le configurazioni di questa lavorazione - - An optional description for this job - Una descrizione facoltativa per questa lavorazione + + For computing Paths; smaller increases accuracy, but slows down computation + Per calcolare i Percorsi: più piccolo incrementa la precisione, ma rallenta il calcolo @@ -1108,14 +1219,9 @@ Tipo di oggetto non supportato come pezzo base - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Lavorazione @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Contiene il valore Z max dell'oggetto + + + Holds the min Z value of Stock + Contiene il valore Z minimo di Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ La posizione di base per questa operazione - - Holds the calculated value for the StartDepth - Contiene il valore calcolato per StartDepth + + Holds the calculated value for the FinalDepth + Contiene il valore calcolato per FinalDepth @@ -1181,14 +1292,9 @@ Profondità finale dell'utensile - il valore inferiore in Z - - Holds the max Z value of Stock - Contiene il valore Z max dell'oggetto - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Profondità iniziale di uso interno solo per valori derivati @@ -1196,9 +1302,19 @@ Rendere False, per escludere l'operazione dalla generazione del codice - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Un commento opzionale per questa operazione + + + + User Assigned Label + Etichetta utente assegnata + + + + Incremental Step Down of Tool + Passo decrementale dello strumento @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Rendere True, se specifica un punto iniziale - - - The tool controller that will be used to calculate the path - Il controllore di strumento da usare per calcolare il percorso - Base Geometry @@ -1241,6 +1352,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Profondità + + + Make True, if specifying a Start Point + Rendere True, se specifica un punto iniziale + PathPocket @@ -1254,16 +1370,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Crea un oggetto percorso Cavità o Tasca 3D da una o più facce - - - Vertical faces do not form a loop - ignoring - Le facce verticali non formano un ciclo - ignorare - Pocket does not support shape %s.%s Tasca non supporta la forma %s.%s + + + Vertical faces do not form a loop - ignoring + Le facce verticali non formano un ciclo - ignorare + Adaptive clearing and profiling @@ -1304,31 +1420,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Crea un oggetto percorso di Cavità (Tasca) da una o più facce - - - Vertical faces do not form a loop - ignoring - Le facce verticali non formano un ciclo - ignorare - - - - Pocket does not support shape %s.%s - Tasca non supporta la forma %s.%s - - - - Adaptive clearing and profiling - Spianatura e profilatura adattativa - - - - Pass Extension - Estensione di passata - - - - The distance the facing operation will extend beyond the boundary shape. - La distanza a cui l'operazione di profilatura si estenderà oltre la forma di contorno. - Generating toolpath with libarea offsets. @@ -1344,40 +1435,25 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Usa il contorno della geometria di base. Default length of extensions. - Default length of extensions. + Lunghezza predefinita delle estensioni. List of features to extend. - List of features to extend. + Elenco delle funzioni da estendere. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Quando abilitato, i bordi di estensione connessi sono combinati con i wire. @@ -1402,26 +1478,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profilo basato su una o più facce - - - Edge Profile - Profilo da bordo - - - - Profile based on edges - Profilo basato sui bordi - - - - Face Profile - Profilo da faccia - - - - Profile based on face or faces - Profilo basato su una o più facce - The tool number in use @@ -1599,12 +1655,62 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Velocità predefinita per l'avanzamento rapido orizzontale. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Velocità predefinita per l'avanzamento rapido verticale. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + L'utilizzo di questo campo dipende da SafeHeightExpression: per impostazione predefinita il suo valore viene aggiunto a StartDepth e utilizzato per un'operazione SafeHeight. + + + + Expression set for the SafeHeight of new operations. + Espressione impostata per SafeHeight nelle nuove operazioni. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + L'utilizzo di questo campo dipende dall'espressione ClearanceHeight - per impostazione predefinita il suo valore viene aggiunto a StartDepth e utilizzato per un'operazione ClearanceHeight. + + + + Expression set for the ClearanceHeight of new operations. + Espressione impostata per ClearanceHeight nelle nuove operazioni. + + + + Default speed for horizontal rapid moves. + Velocità predefinita per l'avanzamento rapido orizzontale. + + + + Default speed for vertical rapid moves. + Velocità predefinita per l'avanzamento rapido verticale. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + L'utilizzo di questo campo dipende da SafeHeightExpression: per impostazione predefinita il suo valore viene aggiunto a StartDepth e utilizzato per un'operazione SafeHeight. + + + + Expression set for the SafeHeight of new operations. + Espressione impostata per SafeHeight nelle nuove operazioni. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + L'utilizzo di questo campo dipende dall'espressione ClearanceHeight - per impostazione predefinita il suo valore viene aggiunto a StartDepth e utilizzato per un'operazione ClearanceHeight. + + + + Expression set for the ClearanceHeight of new operations. + Espressione impostata per ClearanceHeight nelle nuove operazioni. @@ -1682,20 +1788,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - La versione %s del controller degli utensili non è supportata - Error updating TC: %s Errore nell'aggiornare TC: %s - - Error updating TC: %s - Errore nell'aggiornare TC: %s + + Unsupported PathToolController template version %s + La versione %s del controller degli utensili non è supportata @@ -1724,7 +1825,17 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates an array from a selected path - Crea una schiera su un percorso selezionato + Crea una serie su un percorso selezionato + + + + Please select exactly one path object + Si prega di selezionare correttamente un oggetto percorso (path) + + + + Creates an array from a selected path + Crea una serie su un percorso selezionato @@ -1790,11 +1901,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Si prega di selezionare un oggetto Percorso - - - Please select a Path object - Si prega di selezionare un oggetto Percorso - Dress-up @@ -1901,36 +2007,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Crea una Vestizione Osso di cane - - - Edit Dogbone Dress-up - Modifica Dogbone Dress-up - - - - Dogbone Dress-up - Vestizione Osso di cane - - - - Creates a Dogbone Dress-up object from a selected path - Crea un oggetto Dogbone Dress-up (Vestizione Osso di cane) da un tracciato selezionato - - - - Please select one path object - Si prega di selezionare un oggetto Percorso - - - - The selected object is not a path - L'oggetto selezionato non è un percorso - - - - Create Dogbone Dress-up - Crea una Vestizione Osso di cane - Path_DressupDragKnife @@ -1964,36 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Crea una Replica - - - DragKnife Dress-up - Vestizione Trascina lama - - - - Modifies a path to add dragknife corner actions - Modifica un percorso per aggiungere le azioni dragknife (trascina lama) agli angoli - - - - Please select one path object - Si prega di selezionare un oggetto Percorso - - - - The selected object is not a path - L'oggetto selezionato non è un percorso - - - - Please select a Path object - Si prega di selezionare un oggetto Percorso - - - - Create Dress-up - Crea una Replica - Path_DressupLeadInOut @@ -2005,37 +2051,32 @@ If it is necessary to set the FinalDepth manually please select a different oper The Style of LeadOut the Path - The Style of LeadOut the Path + Lo stile di uscita del percorso The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - Lo stile di entrata nel percorso - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Modalità Punto di offset del raggio o modalità Centro LeadInOut Dressup - LeadInOut Dressup + Mascheratura LeadInOut Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crea un oggetto Mascheratura di compensazione in ingresso del raggio della taglierina G41/G42 da un percorso selezionato + + + + LeadInOut Dressup + Mascheratura LeadInOut + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crea un oggetto Mascheratura di compensazione in ingresso del raggio della taglierina G41/G42 da un percorso selezionato @@ -2050,19 +2091,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angolo di rampa. + + + RampEntry Dress-up + Vestizione con angolo di tuffo (RampEntry Dress-up) + + + + Creates a Ramp Entry Dress-up object from a selected path + Creare un oggetto vestizione rampa di entrata (Ramp Entry Dress-up) da un percorso selezionato + + + + The base path to modify + Il percorso di base da modificare + + + + Angle of ramp. + Angolo di rampa. + + + + RampEntry Dress-up + Vestizione con angolo di tuffo (RampEntry Dress-up) + + + + Creates a Ramp Entry Dress-up object from a selected path + Creare un oggetto vestizione rampa di entrata (Ramp Entry Dress-up) da un percorso selezionato + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Crea un oggetto Tag Dress-up da un tracciato selezionato - The base path to modify @@ -2088,6 +2149,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Raggio del raccordo per il tag. + + + The base path to modify + Il percorso di base da modificare + + + + Width of tags. + Larghezza dei tag. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Crea un oggetto Tag Dress-up da un tracciato selezionato + + + + Radius of the fillet for the tag. + Raggio del raccordo per il tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2124,13 +2230,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un oggetto percorso Salto - - - Please select one path object - - Si prega di selezionare un oggetto Percorso - - The selected object is not a path @@ -2138,21 +2237,16 @@ If it is necessary to set the FinalDepth manually please select a different oper L'oggetto selezionato non è un percorso - - - Create Hop - Crea Salto - - - - Creates a Path Hop object - Crea un oggetto percorso Salto - Please select one path object Si prega di selezionare un oggetto Percorso + + + Create Hop + Crea Salto + Path_Inspect @@ -2176,6 +2270,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Si prega di selezionare correttamente un oggetto percorso (path) + + + Inspect G-code + Ispeziona G-code + + + + Inspects the G-code contents of a path + Controlla il contenuto del codice G di un percorso + Path_Job @@ -2245,6 +2349,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Crea un oggetto di selezione del piano + + + Create a Selection Plane object + Crea un oggetto di selezione del piano + Path_Post @@ -2277,7 +2386,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Check the Path project for common errors - Controlla il progetto Percorso per individuare gli errori più comuni + Controlla il Percorso @@ -2309,11 +2418,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Non è stato trovato nessun controller dell'utensile. Vengono adottati i valori predefiniti, e questo è pericoloso. Si prega di aggiungere un controller dell'utensile. - - - No issues detected, {} has passed basic sanity check. - Nessun problema rilevato, {} ha superato il controllo di integrità di base. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2334,16 +2438,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Partendo due lati completa la selezione dei bordi che formano un ciclo chiuso (loop) - - - Finish Selecting Loop - Chiudi il ciclo - - - - Complete loop selection from two edges - Partendo due lati completa la selezione dei bordi che formano un ciclo chiuso (loop) - Path_SetupSheet @@ -2352,11 +2446,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Modifica SetupSheet - - - Edit SetupSheet - Modifica SetupSheet - Path_SimpleCopy @@ -2377,21 +2466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Crea una copia non parametrica di un altro percorso - - - Simple Copy - Copia semplice - - - - Creates a non-parametric copy of another path - Crea una copia non parametrica di un altro percorso - - - - Please select exactly one path object - Si prega di selezionare correttamente un oggetto percorso (path) - Path_Simulator @@ -2405,16 +2479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simula il percorso G-Code sul pezzo base - - - CAM Simulator - Simulatore CAM - - - - Simulate Path G-Code on stock - Simula il percorso G-Code sul pezzo base - Path_Stop @@ -2447,7 +2511,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Questa operazione richiede l'installazione di OpenCamLib. - + This operation requires OpenCamLib to be installed. Questa operazione richiede l'installazione di OpenCamLib. @@ -2493,12 +2557,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Aggiunge un Controllo utensile alla lavorazione - + Add Tool Controller to the Job Aggiunge un Controllo utensile alla lavorazione - + Add Tool Controller Aggiungi un Controllo utensile @@ -2567,15 +2631,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabella degli utensili LinuxCNC (*.tbl) - + Open tooltable Apri la tabella strumenti - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (XML); HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2774,7 +2833,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Properties - Propietà + Proprietà @@ -2816,6 +2875,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (XML); HeeksCAD tooltable (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabella strumenti XML (*.xml);;Tabella strumenti LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - Il gcode da inserire - - - - The tool controller that will be used to calculate the path - Il controllore di strumento da usare per calcolare il percorso - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm index 7bbd4ccd7d..c763c72fb0 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index bf726628ee..d103945ebb 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -204,14 +204,14 @@ ペックを有効 - - Height to clear top of material - Height to clear top of material + + Enable pecking + ペックを有効 - - Diameters of the holes - 穴の直径 + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - チップのクリアのための後退前に増やすドリル深さ + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - ペックを有効 + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + フィード開始位置の高さとパス終了時のツール後退中の高さ + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path CNC パスの方向平面 - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ 円形の穴をプロファイル - - Orientation plane of CNC path - CNC パスの方向平面 + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + 円形の穴をプロファイル - - Profile holes as well as the outline - 輪郭と同様に穴をプロファイル + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ ジグザグパターンの角度 - - Maximum distance before a miter join is truncated - マイタ継ぎ手がとがるまでの最大距離 + + Percent of cutter diameter to step over on each pass + 工具直径に対する経路同士の重なり率（％） - - Extra offset to apply to the operation. Direction is operation dependent. - 工程に適用する追加オフセット。方向は工程に依存して変わります。 + + Angle of the zigzag pattern + ジグザグパターンの角度 @@ -329,9 +349,9 @@ パターン加工 - - Angle of the zigzag pattern - ジグザグパターンの角度 + + Add Optional or Mandatory Stop to the program + プログラムにオプションまたは強制的な停止を追加 @@ -373,21 +393,6 @@ Rapid rate for horizontal moves 水平移動の高速速度 - - - Direction of spindle rotation - スピンドルの回転方向 - - - - Feed rate for vertical moves in Z - Z方向での垂直移動の送り速度 - - - - Feed rate for horizontal moves - 水平移動の送り速度 - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + 編集 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + 編集 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ 親のジョブ %s は基本オブジェクトを持っていません - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + 切れ刃角 (%.2f) は、負の歯先距離をもたらします - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point 開始点を選択 + + + Heights + 高さ + + + + AreaOp Operation + AreaOp工程 + + + + Uncreate AreaOp Operation + AreaOp工程を破棄 + + + + Pick Start Point + 開始点を選択 + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path パス(&P) - - - Path Dressup - パス・ドレスアップ - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - プロジェクトのセットアップ - - - - Path Modification - パス変更 - - - - Helpful Tools - 便利なツール - - - - &Path - パス(&P) - - - - Path Dressup - パス・ドレスアップ - - - - Supplemental Commands - Supplemental Commands - - - - Edit - 編集 - this object already in the list @@ -751,6 +839,14 @@ エッジ選択に基づいてプロファイルを作成 + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ op %s のためのジョブが見つかりません。 - + job %s has no Base. ジョブ %s にはベースがありません。 - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + 挿入するGコード + + + + The tool controller that will be used to calculate the path + パスの計算に使用するツールコント ローラー + + + + The gcode to be inserted + 挿入するGコード + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - 穴開け + Creates a Path Drilling object from a features of a base object + ベースオブジェクトのフィーチャーからパスドリルオブジェクトを作成 @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + 彫刻 @@ -974,26 +1085,11 @@ Start cutting from the inside or outside 内側または外側から切削を開始 - - - Creates a Path Helix object from a features of a base object - ベースオブジェクトのフィーチャーからパスヘリックスオブジェクトを作成 - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside 内側または外側から切削を開始 - - - Radius increment (must be smaller than tool diameter) - 半径の増分 (工具直径よりも小さくなければなりません) - PathJob @@ -1023,9 +1119,24 @@ サポートされていないストックタイプ %s (%d) - - Stock not from Base bound box! - ストックが基本バウンディングボックスから開始していません! + + Select the Post Processor + ポストプロセッサを選択 + + + + Arguments for the Post Processor (specific to the script) + ポストプロセッサの引数（スクリプトに固有） + + + + Stock not a box! + ストックがボックスではありません! + + + + For computing Paths; smaller increases accuracy, but slows down computation + パスの計算用。小さいと精度が上がりますが計算が遅くなります。 @@ -1043,9 +1154,9 @@ このジョブに使用可能なツールコント ローラーのコレクション - - Unsupported stock type %s (%d) - サポートされていないストックタイプ %s (%d) + + Select the Post Processor + ポストプロセッサを選択 @@ -1053,9 +1164,9 @@ このプロジェクトの NC 出力ファイル - - Select the Post Processor - ポストプロセッサを選択 + + Arguments for the Post Processor (specific to the script) + ポストプロセッサの引数（スクリプトに固有） @@ -1063,9 +1174,9 @@ このジョブの設定を保持しているセットアップシート - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + パスの計算用。小さいと精度が上がりますが計算が遅くなります。 @@ -1108,14 +1219,9 @@ サポートされていないストックタイプ - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - ベース -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ この工程のベース位置 - - Holds the calculated value for the StartDepth - StartDepthの計算値を保持 + + Holds the calculated value for the FinalDepth + FinalDepthの計算値を保持 @@ -1181,14 +1292,9 @@ ツールの最終深さ - Z方向の最小値 - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ 生成されたコードの工程を止めるにはFalseにします - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + この工程のオプションコメント + + + + User Assigned Label + ユーザー割り当てラベル + + + + Incremental Step Down of Tool + ツールの増分ステップダウン @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point 開始点を指定する場合は True - - - The tool controller that will be used to calculate the path - パスの計算に使用するツールコント ローラー - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths 深さ + + + Make True, if specifying a Start Point + 開始点を指定する場合は True + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces 1面または複数面からパス・3Dポケット・オブジェクトを作成 - - - Vertical faces do not form a loop - ignoring - 垂直面がループを形成していません - 無視します - Pocket does not support shape %s.%s ポケットは形状 %s.%s をサポートしていません + + + Vertical faces do not form a loop - ignoring + 垂直面がループを形成していません - 無視します + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces 1面または複数面からパス・ポケット・オブジェクトを作成 - - - Vertical faces do not form a loop - ignoring - 垂直面がループを形成していません - 無視します - - - - Pocket does not support shape %s.%s - ポケットは形状 %s.%s をサポートしていません - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - 経路の拡張 - - - - The distance the facing operation will extend beyond the boundary shape. - 境界シェイプを超えてフェイシング工程を延長する距離 - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - エッジ・プロファイル - - - - Profile based on edges - エッジに基づくプロファイル - - - - Face Profile - フェイス・プロファイル - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - バージョン {} のサポートされていないパスツールコントローラーテンプレート - Error updating TC: %s TC更新エラー: %s - - Error updating TC: %s - TC更新エラー: %s + + Unsupported PathToolController template version %s + バージョン {} のサポートされていないパスツールコントローラーテンプレート @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object パス・オブジェクトをひとつだけ選択してください。 + + + Creates an array from a selected path + 選択したパスから配列を作成 + + + + Please select exactly one path object + パス・オブジェクトをひとつだけ選択してください。 + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper パスオブジェクトをひとつ選択してください - - - Please select a Path object - パスオブジェクトを選択して下さい - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up ドッグボーン・ドレスアップを作成 - - - Edit Dogbone Dress-up - ドッグボーン・ドレスアップを編集 - - - - Dogbone Dress-up - ドッグボーン・ドレスアップ - - - - Creates a Dogbone Dress-up object from a selected path - 選択したパスからドッグボーン・ドレスアップ・オブジェクトを作成 - - - - Please select one path object - パスオブジェクトをひとつ選択してください - - - - The selected object is not a path - 選択されたオブジェクトはパスではありません - - - - Create Dogbone Dress-up - ドッグボーン・ドレスアップを作成 - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up ドレスアップを作成 - - - DragKnife Dress-up - ドラッグナイフ・ドレスアップ - - - - Modifies a path to add dragknife corner actions - ドラッグナイフ・コーナーアクションを追加するためにパスを変更軌道、パス - - - - Please select one path object - パスオブジェクトをひとつ選択してください - - - - The selected object is not a path - 選択されたオブジェクトはパスではありません - - - - Please select a Path object - パスオブジェクトを選択して下さい - - - - Create Dress-up - ドレスアップを作成 - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - リードイン・パスのスタイル - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. 斜面の角度 + + + RampEntry Dress-up + RampEntry ドレスアップ + + + + Creates a Ramp Entry Dress-up object from a selected path + 選択したパスからランプエントリー・ドレスアップ・オブジェクトを作成 + + + + The base path to modify + 変更するベースパス + + + + Angle of ramp. + 斜面の角度 + + + + RampEntry Dress-up + RampEntry ドレスアップ + + + + Creates a Ramp Entry Dress-up object from a selected path + 選択したパスからランプエントリー・ドレスアップ・オブジェクトを作成 + Path_DressupTag - - - Tag Dress-up - タグ・ドレスアップ - - - - Creates a Tag Dress-up object from a selected path - 選択したパスからタグ・ドレスアップ・オブジェクトを作成 - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. タグのフィレットの半径 + + + The base path to modify + 変更するベースパス + + + + Width of tags. + タグの幅。 + + + + Tag Dress-up + タグ・ドレスアップ + + + + Creates a Tag Dress-up object from a selected path + 選択したパスからタグ・ドレスアップ・オブジェクトを作成 + + + + Radius of the fillet for the tag. + タグのフィレットの半径 + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object パス・ホップ・オブジェクトを作成 - - - Please select one path object - - パスオブジェクトをひとつ選択してください - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper 選択されたオブジェクトはパスではありません - - - Create Hop - ホップを作成 - - - - Creates a Path Hop object - パス・ホップ・オブジェクトを作成 - Please select one path object パスオブジェクトをひとつ選択してください + + + Create Hop + ホップを作成 + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object パス・オブジェクトをひとつだけ選択してください。 + + + Inspect G-code + Gコードを検査 + + + + Inspects the G-code contents of a path + パスのGコードの内容を検査 + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object 選択平面オブジェクトを作成 + + + Create a Selection Plane object + 選択平面オブジェクトを作成 + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - 問題は検知されませんでした。{} は基本的な正常検査に合格しています。 - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges 2つのエッジからのループ選択を完了 - - - Finish Selecting Loop - ループ選択を終了 - - - - Complete loop selection from two edges - 2つのエッジからのループ選択を完了 - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path 別のパスの非パラメトリックなコピーを作成 - - - Simple Copy - 単純コピー - - - - Creates a non-parametric copy of another path - 別のパスの非パラメトリックなコピーを作成 - - - - Please select exactly one path object - パス・オブジェクトをひとつだけ選択してください。 - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock ストック上のパスのGコードをシミュレート - - - CAM Simulator - CAMシミュレーター - - - - Simulate Path G-Code on stock - ストック上のパスのGコードをシミュレート - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper この工程ではOpenCamLibをインストールする必要があります。 - + This operation requires OpenCamLib to be installed. この工程ではOpenCamLibをインストールする必要があります。 @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper ジョブにツールコントローラーを追加 - + Add Tool Controller to the Job ジョブにツールコントローラーを追加 - + Add Tool Controller ツールコントローラーを追加 @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNCツールテーブル (*.tbl) - + Open tooltable ツールテーブルを開く - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - ツールテーブルXML (*.xml);HeeksCADツールテーブル (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + ツールテーブルXML (*.xml);HeeksCADツールテーブル (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper ツールテーブル XML (*.xml);;LinuxCNCツールテーブル (*.tbl) - - PathCustom - - - The gcode to be inserted - 挿入するGコード - - - - The tool controller that will be used to calculate the path - パスの計算に使用するツールコント ローラー - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.qm b/src/Mod/Path/Gui/Resources/translations/Path_kab.qm index 0b50a3f9f8..0769fec3f7 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_kab.qm and b/src/Mod/Path/Gui/Resources/translations/Path_kab.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts index 64bfb46629..26aeebf4f2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incrément de profondeur de percement avant retrait pour enlever les copeaux + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Plan d'orientation du parcours CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Plan d'orientation du parcours CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Ajouter une arrêt facultatif ou obligatoire du programme @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Sens de rotation de la fraise - - - - Feed rate for vertical moves in Z - Vitesse d'avancement pour les déplacements verticaux suivant Z - - - - Feed rate for horizontal moves - Vitesse d'avancement pour les déplacements horizontaux - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Éditer + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Éditer + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Tawila n usenfaṛ - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Éditer - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Forage + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ Le fichier de sortie NC pour ce projet - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Profondeur finale de l'outil - plus petite valeur dans Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Marquer « false », pour empêcher l'opération ne génére du code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incrément de pas de l'outil vers le bas @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Marquer « true » si vous définissez un point de départ - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Marquer « true » si vous définissez un point de départ + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Profil de face - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Crée un réseau à partir d'une trajectoire sélectionnée + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Veuillez sélectionner une trajectoire - - - Please select a Path object - Veuillez sélectionner une trajectoire - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Créer un habillage - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Veuillez sélectionner une trajectoire - - - - Create Dress-up - Créer un habillage - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + Le parcours de base à modifier + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + Le parcours de base à modifier + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crée une trajectoire de saut - - - Please select one path object - - Veuillez sélectionner une trajectoire - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper L'objet sélectionné n'est pas une trajectoire - - - Create Hop - Crée un saut - - - - Creates a Path Hop object - Crée une trajectoire de saut - Please select one path object Please select one path object + + + Create Hop + Crée un saut + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspecter le G-code + + + + Inspects the G-code contents of a path + Inspecte le G-code d'une trajectoire + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Crée un plan de sélection + + + Create a Selection Plane object + Crée un plan de sélection + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2377,21 +2466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Crée une copie non paramétrique d'un autre chemin - - - Simple Copy - Copie simple - - - - Creates a non-parametric copy of another path - Crée une copie non paramétrique d'un autre chemin - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2405,16 +2479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2447,7 +2511,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2493,12 +2557,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2567,15 +2631,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Ouvre la table des outils - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - Save tooltable @@ -2816,6 +2875,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.qm b/src/Mod/Path/Gui/Resources/translations/Path_ko.qm index 7bccbdf4f2..0ed9925264 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ko.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ko.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts index 00e2e0bf12..60de37c162 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ 패턴 방법 - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + 편집 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + 편집 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - 프로젝트 설정 - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - 편집 - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - 드릴링 + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable 도구목록 열기 - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - 도구목록 XML (*.xml); HeeksCAD 도구목록 (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + 도구목록 XML (*.xml); HeeksCAD 도구목록 (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm index 8f3477a273..c88c8aec7b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm and b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts index 71c404d0b0..0e6771ec4e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Veleno sukimosi kryptis - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -476,7 +481,7 @@ The vertex index to start the path from - The vertex index to start the path from + Pradinės viršūnės indeksas @@ -561,6 +566,36 @@ Path + + + Edit + Taisyti + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Nepaisoma viršūnių + + + + Edit + Taisyti + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Taisyti - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Drilling + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1462,7 +1518,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertexes are not supported - Vertexes are not supported + Viršūnių naudojimas nepalaikomas @@ -1477,7 +1533,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertexes are not supported - Vertexes are not supported + Viršūnių naudojimas nepalaikomas @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm index 5ce7d3e26f..a9b1b154d9 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index a4ee86281a..c1b8646637 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Hoogte tot aan bovenkant van materiaal + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Bewerken + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Bewerken + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - Nuttig gereedschap - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Bewerken - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + De in te voegen gcode + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + De in te voegen gcode + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Boren + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - Een optionele omschrijving voor dit onderdeel + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Houd te maximale Z waarde van Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Houd te maximale Z waarde van Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Profile based on face or faces Profiel gebaseerd op één of meerdere vlakken - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profiel gebaseerd op één of meerdere vlakken - The tool number in use @@ -1607,6 +1663,56 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Een tool controller was niet gevonden. Standaard waarden zijn gebruikt welke onbetrouwbaar zijn. Voeg alsnog een Tool controller toe. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - De in te voegen gcode - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.qm b/src/Mod/Path/Gui/Resources/translations/Path_no.qm index 1f40294f9e..11dc5fdaf8 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_no.qm and b/src/Mod/Path/Gui/Resources/translations/Path_no.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.ts b/src/Mod/Path/Gui/Resources/translations/Path_no.ts index bff2b61fc5..1696b00eb5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_no.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_no.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Rediger + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Rediger + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Rediger - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Drilling + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm index 5953aa6e1b..9dcc3b344b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index bc2996f95a..bf233b252c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -204,14 +204,14 @@ Włącz rwanie - - Height to clear top of material - Height to clear top of material + + Enable pecking + Włącz rwanie - - Diameters of the holes - Średnice otworów + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Przyrostowa głębokość wiercenia przed wyjazdem w celu usunięcia wiórów + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Włącz rwanie + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Wysokość, na której rozpoczyna się posuw i wysokość podczas wycofywania narzędzia po ukończeniu ścieżki + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientację płaszczyzny ścieżki CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profil okrągłych otworów - - Orientation plane of CNC path - Orientację płaszczyzny ścieżki CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profil okrągłych otworów - - Profile holes as well as the outline - Otwory w profilu, tak samo jak kontury + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Kąt do wzoru Zig-Zag - - Maximum distance before a miter join is truncated - Maksymalny dystans pomiędzy stycznymi ukosu jest kadłubowy + + Percent of cutter diameter to step over on each pass + Procent średnicy noża do przekroczenia na każdym przejściu - - Extra offset to apply to the operation. Direction is operation dependent. - Dodatkowy offset do operacji. Kierunek jest zależny od operacji. + + Angle of the zigzag pattern + Kąt do wzoru Zig-Zag @@ -329,9 +349,9 @@ Metoda wzoru - - Angle of the zigzag pattern - Kąt do wzoru Zig-Zag + + Add Optional or Mandatory Stop to the program + Dodaj opcjonalne lub obowiązkowe zatrzymanie programu @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Szybki przyrost dla horyzontalnych ruchów - - - Direction of spindle rotation - Kierunek obrotów wrzeciona - - - - Feed rate for vertical moves in Z - Prędkość posuwu w osi Z - - - - Feed rate for horizontal moves - Prędkość posuwu dla poziomych ruchów - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Edytuj + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Edytuj + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Nadrzędne zadanie %s nie posiada podstawowego obiektu - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Przecinacz krawędzi (%.2f) skutkuje nieprawidłowym narzędziem długości koncówki - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Wybierz punkt początkowy + + + Heights + Wysokości + + + + AreaOp Operation + Operacja AreaOp + + + + Uncreate AreaOp Operation + Nieistniejąca operacja AreaOp + + + + Pick Start Point + Wybierz punkt początkowy + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Ścieżka - - - Path Dressup - Konfiguracja ścieżki - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Ustawienia projektu - - - - Path Modification - Modyfikacja Trajektorii - - - - Helpful Tools - Pomocne narzędzia - - - - &Path - &Ścieżka - - - - Path Dressup - Konfiguracja ścieżki - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Edytuj - this object already in the list @@ -751,6 +839,14 @@ Utwórz profil bazujący na wyborze krawędzi + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ nie znaleziono zadań dla operacji %s. - + job %s has no Base. zadanie %s nie posiada Podstawy. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + G-Code do wstawienia + + + + The tool controller that will be used to calculate the path + Kontroler, który zostanie użyty do określenia ścieżki + + + + The gcode to be inserted + G-Code do wstawienia + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Wiercenie + Creates a Path Drilling object from a features of a base object + Tworzy wiertniczą ściężkę z funkcji projektu bazowego @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Grawerować @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Rozpocznij cięcie od wewnątrz lub na zewnątrz - - - Creates a Path Helix object from a features of a base object - Tworzy obiekt Path Helix z funkcji obiektu bazowego - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Rozpocznij cięcie od wewnątrz lub na zewnątrz - - - Radius increment (must be smaller than tool diameter) - Przyrost promienia (musi być mniejszy niż średnica narzędzia) - PathJob @@ -1023,9 +1119,24 @@ Nieobsługiwany typ zapasów %s (%d) - - Stock not from Base bound box! - Zapas nie pochodzi z podstawowej bryły brzegowej! + + Select the Post Processor + Wybierz Post Procesor + + + + Arguments for the Post Processor (specific to the script) + Argument dla Post-Procesora (zależnie od skryptu) + + + + Stock not a box! + Zapasy nie pudełko! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Do przetwarzania ścieżek; mniejsze zwiększają dokładność, ale spowalniają obliczanie @@ -1043,9 +1154,9 @@ Zbiór dostępnych kontrolerów narzędzi dla tego zadania. - - Unsupported stock type %s (%d) - Nieobsługiwany typ zapasów %s (%d) + + Select the Post Processor + Wybierz Post Procesor @@ -1053,9 +1164,9 @@ NC plik wyjściowy dla tego projektu - - Select the Post Processor - Wybierz Post Procesor + + Arguments for the Post Processor (specific to the script) + Argument dla Post-Procesora (zależnie od skryptu) @@ -1063,9 +1174,9 @@ SetupSheet wstrzymuje ustawienia dla tego zadania - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + Do przetwarzania ścieżek; mniejsze zwiększają dokładność, ale spowalniają obliczanie @@ -1108,14 +1219,9 @@ Nieobsługiwany typ zapasów - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Baza -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Zadania @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Podstawowa lokacja do tej operacji - - Holds the calculated value for the StartDepth - Zatrzymuje obliczoną wartość dla StartDepth + + Holds the calculated value for the FinalDepth + Zatrzymuje obliczoną wartość dla FinalDepth @@ -1181,14 +1292,9 @@ Końcowa głębokość dla narzędzia - najniższa wartość w kierunku Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Opcjonalny komentarz do tej operacji + + + + User Assigned Label + Etykieta przypisana przez użytkownika + + + + Incremental Step Down of Tool + Przyrostowe krok w dół narzędzia @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Upewnij się, że określasz punkt początkowy - - - The tool controller that will be used to calculate the path - Kontroler, który zostanie użyty do określenia ścieżki - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Głębia + + + Make True, if specifying a Start Point + Upewnij się, że określasz punkt początkowy + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Tworzy obiekt Kieszeniowy 3D ścieżki z twarzy lub twarzy - - - Vertical faces do not form a loop - ignoring - Pionowe ściany nie tworzą pętli - ignoruj - Pocket does not support shape %s.%s Kieszeń nie obsługuje kształtu %s.%s + + + Vertical faces do not form a loop - ignoring + Pionowe ściany nie tworzą pętli - ignoruj + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy - - - Vertical faces do not form a loop - ignoring - Pionowe ściany nie tworzą pętli - ignoruj - - - - Pocket does not support shape %s.%s - Kieszeń nie obsługuje kształtu %s.%s - - - - Adaptive clearing and profiling - Adaptacyjne czyszczenie i profilowanie - - - - Pass Extension - Rozszwrzenia pass - - - - The distance the facing operation will extend beyond the boundary shape. - Odległość, na jaką skierowana jest operacja, przekroczy granicę kształtu. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profil oparty na powierzchni lub powierzchniach - - - Edge Profile - Profil krawędzi - - - - Profile based on edges - Profil oparty na krawędziach - - - - Face Profile - Profil powierzchni - - - - Profile based on face or faces - Profil oparty na powierzchni lub powierzchniach - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Nieobsługiwana wersja szablonu PathToolController %s - Error updating TC: %s Błąd podczas aktualizacji TC: %s - - Error updating TC: %s - Błąd podczas aktualizacji TC: %s + + Unsupported PathToolController template version %s + Nieobsługiwana wersja szablonu PathToolController %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Proszę wybrać dokładnie jeden obiekt ścieżki + + + Creates an array from a selected path + Tworzy tablicę z wybranej ścieżki + + + + Please select exactly one path object + Proszę wybrać dokładnie jeden obiekt ścieżki + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Proszę wybrać ścieżkę obiektu - - - Please select a Path object - Proszę wybrać obiekt-ścieżkę - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Utwórz Dogbone Dress-up - - - Edit Dogbone Dress-up - Edycja Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Tworzy obiekt Dogbone Dress-up z wybranych ścieżek - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - Wybrany obiekt nie jest ścieżką - - - - Create Dogbone Dress-up - Utwórz Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Utworzenie ulepszenia - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modyfikuje ścieżkę, żeby dodać dragknife akcji rogu - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - Wybrany obiekt nie jest ścieżką - - - - Please select a Path object - Proszę wybrać obiekt-ścieżkę - - - - Create Dress-up - Utworzenie ulepszenia - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Kąt rampy. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Tworzy obiekt RampEntry Dress-up z wybranej ścieżki + + + + The base path to modify + Ścieżka bazowa do modyfikacji + + + + Angle of ramp. + Kąt rampy. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Tworzy obiekt RampEntry Dress-up z wybranej ścieżki + Path_DressupTag - - - Tag Dress-up - Dress-up etykiety - - - - Creates a Tag Dress-up object from a selected path - Tworzy obiekt Dress-up etykiety z wybranej ścieżki - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Promień paska etykiety. + + + The base path to modify + Ścieżka bazowa do modyfikacji + + + + Width of tags. + Szerokość mostka. + + + + Tag Dress-up + Dress-up etykiety + + + + Creates a Tag Dress-up object from a selected path + Tworzy obiekt Dress-up etykiety z wybranej ścieżki + + + + Radius of the fillet for the tag. + Promień paska etykiety. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tworzy obiekty Path Hop - - - Please select one path object - - Proszę wybrać ścieżkę obiektu - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Wybrany obiekt nie jest ścieżką - - - Create Hop - Utwórz skok - - - - Creates a Path Hop object - Tworzy obiekty Path Hop - Please select one path object Please select one path object + + + Create Hop + Utwórz skok + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Proszę wybrać dokładnie jeden obiekt ścieżki + + + Inspect G-code + Sprawdzić kod G + + + + Inspects the G-code contents of a path + Sprawdza zawartość G-kod ścieżki + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Utwórz obiekt Płaszczyzny selekcji + + + Create a Selection Plane object + Utwórz obiekt Płaszczyzny selekcji + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - Nie wykryto żadnych problemów, {} przeszedł podstawową kontrolę poprawności. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Kompletny wybór pętli z dwóch krawędzi - - - Finish Selecting Loop - Zakończ zaznaczoną pętle - - - - Complete loop selection from two edges - Kompletny wybór pętli z dwóch krawędzi - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2377,21 +2466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Tworzy nieparametryczną kopię innej ścieżki - - - Simple Copy - Prosta kopia - - - - Creates a non-parametric copy of another path - Tworzy nieparametryczną kopię innej ścieżki - - - - Please select exactly one path object - Proszę wybrać dokładnie jeden obiekt ścieżki - Path_Simulator @@ -2405,16 +2479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Symulacja ścieżki G-Code na magazynie - - - CAM Simulator - Symulator CAM - - - - Simulate Path G-Code on stock - Symulacja ścieżki G-Code na magazynie - Path_Stop @@ -2447,7 +2511,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Operacja wymaga zainstalowania OpenCamLib. - + This operation requires OpenCamLib to be installed. Operacja wymaga zainstalowania OpenCamLib. @@ -2493,12 +2557,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Dodaj kontroler narzędzi do zadania - + Add Tool Controller to the Job Dodaj kontroler narzędzi do zadania - + Add Tool Controller Dodaj kontroler narzędzi @@ -2567,15 +2631,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Otwórz tabelę narzędziową - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tabela narzędziowa XML (*.xml); tabela HeeksCAD (*.tooltable) - Save tooltable @@ -2816,6 +2875,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tabela narzędziowa XML (*.xml); tabela HeeksCAD (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - G-Code do wstawienia - - - - The tool controller that will be used to calculate the path - Kontroler, który zostanie użyty do określenia ścieżki - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm index 8bcc48ca6c..4db3aeefe7 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index be470250b3..818a79d7d4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -26,7 +26,7 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Planar: Verificação de superfície Flat, 3D. Girional: 4th-eixo de varredura rotativa. @@ -41,22 +41,22 @@ Clearing pattern to use - Clearing pattern to use + Limpando padrão para usar The model will be rotated around this axis. - The model will be rotated around this axis. + O modelo será girado em torno deste eixo. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Iniciar índice(ângulo) para a verificação rotativa Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Parar índice(ângulo) para a verificação rotativa @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignorar áreas que se desenrolam abaixo da profundidade especificada. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de resíduos para ignorar. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Corte os resíduos para profundidade na borda do modelo, libertando o modelo. @@ -204,14 +204,14 @@ Ativar dobragem - - Height to clear top of material - Altura para limpar a parte superior do material + + Enable pecking + Ativar dobragem - - Diameters of the holes - Diâmetros dos furos + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Profundidade incremental da fresa antes da saída para limpeza dos cavacos + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Ativar dobragem + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + A altura inicial da projeção e altura durante a retração final da extensão + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Plano de orientação do caminho do CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Perfilar furos redondos - - Orientation plane of CNC path - Plano de orientação do caminho do CNC + + The base object this collision refers to + O objeto base a que esta colisão se refere - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Perfilar furos redondos - - Profile holes as well as the outline - Perfilar furos e contorno + + The base object this collision refers to + O objeto base a que esta colisão se refere @@ -309,14 +329,14 @@ Ângulo do padrão em zigue-zague - - Maximum distance before a miter join is truncated - Distancia máxima antes de que uma junta a meia-esquadria ser cortada + + Percent of cutter diameter to step over on each pass + Percentagem do diâmetro da fresa para sobrepor a cada passagem - - Extra offset to apply to the operation. Direction is operation dependent. - Deslocamento extra a ser aplicado à operação. A direção depende da operação. + + Angle of the zigzag pattern + Ângulo do padrão em zigue-zague @@ -329,9 +349,9 @@ Método de geração do padrão (trama) - - Angle of the zigzag pattern - Ângulo do padrão em zigue-zague + + Add Optional or Mandatory Stop to the program + Adicionar parada opcional ou obrigatória ao programa @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Velocidade de avanço rápido para movimentos horizontais - - - Direction of spindle rotation - Sentido de rotação do eixo - - - - Feed rate for vertical moves in Z - Taxa de alimentação para movimentos verticais em Z - - - - Feed rate for horizontal moves - Taxa de alimentação para movimentos horizontais - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignorando o vértice + + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Trabalho pai %s não tem um objeto base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º @@ -621,6 +651,109 @@ Pick Start Point Escolher Ponto Inicial + + + Heights + Alturas + + + + AreaOp Operation + Operação AreaOp + + + + Uncreate AreaOp Operation + Elimina Operação de AreaOp + + + + Pick Start Point + Escolher Ponto Inicial + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Trajetória - - - Path Dressup - Caminho da trajetória adicional - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configurações do Projeto - - - - Path Modification - Modificação de trajetória - - - - Helpful Tools - Ferramentas úteis - - - - &Path - &Trajetória - - - - Path Dressup - Caminho da trajetória adicional - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Editar - this object already in the list @@ -751,6 +839,14 @@ Criar um perfil baseado na seleção de arestas + + PathAdaptive + + + Adaptive + Adaptável + + PathAreaOp @@ -764,17 +860,45 @@ nenhuma tarefa para op %s encontrada. - + job %s has no Base. a tarefa %s não tem nenhuma base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + O gcode a ser inserido + + + + The tool controller that will be used to calculate the path + O controlador de ferramenta que será usado para calcular a trajetória + + + + The gcode to be inserted + O gcode a ser inserido + + + + PathDeburr + + + The desired width of the chamfer + A largura desejada do chamfer + + + + The additional depth of the tool path + A profundidade adicional do caminho da ferramenta + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Perfuração + Creates a Path Drilling object from a features of a base object + Cria uma perfuração a partir de um elemento do objeto de base @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Entalhar @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Iniciar o corte do interior ou exterior - - - Creates a Path Helix object from a features of a base object - Cria um objeto de trajetória helicoidal a partir dos recursos de um objeto base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Iniciar o corte do interior ou exterior - - - Radius increment (must be smaller than tool diameter) - Incremento de raio (deve ser menor que o diâmetro da ferramenta) - PathJob @@ -1023,9 +1119,24 @@ Tipo de estoque não suportado %s(%d) - - Stock not from Base bound box! - O estoque não respeita a caixa delimitadora do objeto base! + + Select the Post Processor + Selecione o Pós-processador + + + + Arguments for the Post Processor (specific to the script) + Argumentos para o pós-processador (específico para cada script) + + + + Stock not a box! + O estoque não é um paralelipípedo! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Para o cálculo de trajetórias; um valor menor aumenta a precisão, mas o cálculo fica mais devagar @@ -1043,9 +1154,9 @@ Coleção de controladores de ferramenta disponíveis para esta tarefa. - - Unsupported stock type %s (%d) - Tipo de estoque não suportado %s(%d) + + Select the Post Processor + Selecione o Pós-processador @@ -1053,9 +1164,9 @@ O arquivo de saída NC para este projeto - - Select the Post Processor - Selecione o Pós-processador + + Arguments for the Post Processor (specific to the script) + Argumentos para o pós-processador (específico para cada script) @@ -1063,9 +1174,9 @@ Folha de configurações para esta tarefa - - An optional description for this job - Uma descrição opcional para este trabalho + + For computing Paths; smaller increases accuracy, but slows down computation + Para o cálculo de trajetórias; um valor menor aumenta a precisão, mas o cálculo fica mais devagar @@ -1108,14 +1219,9 @@ Tipo de estoque não suportado - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Tarefas @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Mantem o valor Z máximo de Stock (Estoque) + + + Holds the min Z value of Stock + Mantém o valor mínimo Z do estoque + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Posições de base para esta operação - - Holds the calculated value for the StartDepth - Contém o valor calculado para a profundidade inicial + + Holds the calculated value for the FinalDepth + Contém o valor calculado para a profundidade final @@ -1181,14 +1292,9 @@ Profundidade final da ferramenta - menor valor em Z - - Holds the max Z value of Stock - Mantem o valor Z máximo de Stock (Estoque) - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Iniciar uso interno de Depth apenas para valores derivados @@ -1196,9 +1302,19 @@ Falso, para impedir a operação de geração de código - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Um comentário opcional para esta operação + + + + User Assigned Label + Rótulo atribuído pelo utilizador + + + + Incremental Step Down of Tool + Passo incremental para baixo da ferramenta @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Verdadeiro, especificando um ponto de partida - - - The tool controller that will be used to calculate the path - O controlador de ferramenta que será usado para calcular a trajetória - Base Geometry @@ -1242,6 +1353,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Depths Profundidades + + + Make True, if specifying a Start Point + Verdadeiro, especificando um ponto de partida + PathPocket @@ -1255,16 +1371,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path 3D Pocket object from a face or faces Cria uma trajetória de vazio (bolso) 3D de uma face ou faces - - - Vertical faces do not form a loop - ignoring - Faces verticais não formam uma sequência - ignorando - Pocket does not support shape %s.%s Vazio (bolso) não suporta a forma %s.%s + + + Vertical faces do not form a loop - ignoring + Faces verticais não formam uma sequência - ignorando + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path Pocket object from a face or faces Cria uma trajetória de vazio (bolso) de uma face ou faces - - - Vertical faces do not form a loop - ignoring - Faces verticais não formam uma sequência - ignorando - - - - Pocket does not support shape %s.%s - Vazio (bolso) não suporta a forma %s.%s - - - - Adaptive clearing and profiling - Limpeza e criação de perfil adaptáveis - - - - Pass Extension - Extensão da passada - - - - The distance the facing operation will extend beyond the boundary shape. - A distância que a operação de faciamento se prolongará para além do contorno da forma. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1358,28 +1444,18 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Default length of extensions. - Default length of extensions. + Tamanho padrão das extensões. List of features to extend. - List of features to extend. + Lista de recursos a estender. When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Profile based on face or faces Perfil baseado em face ou faces - - - Edge Profile - Perfil de aresta - - - - Profile based on edges - Perfil baseado em arestas - - - - Face Profile - Perfil de face - - - - Profile based on face or faces - Perfil baseado em face ou faces - The tool number in use @@ -1600,12 +1656,62 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Velocidade padrão para movimentos rápidos horizontais. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Velocidade padrão para movimentos rápidos verticais. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + O uso deste campo depende da SafeHeightExpression - por padrão, seu valor é somado a StartDepth e usado como SafeHeight em uma operação. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Velocidade padrão para movimentos rápidos horizontais. + + + + Default speed for vertical rapid moves. + Velocidade padrão para movimentos rápidos verticais. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + O uso deste campo depende da SafeHeightExpression - por padrão, seu valor é somado a StartDepth e usado como SafeHeight em uma operação. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. @@ -1683,20 +1789,15 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathToolController - - - Unsupported PathToolController template version %s - Versão do modelo de controlador de ferramenta não suportada %s - Error updating TC: %s Erro ao atualizar o TC: %s - - Error updating TC: %s - Erro ao atualizar o TC: %s + + Unsupported PathToolController template version %s + Versão do modelo de controlador de ferramenta não suportada %s @@ -1732,6 +1833,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Please select exactly one path object Apenas uma trajetória deve ser selecionada + + + Creates an array from a selected path + Cria uma matriz a partir de uma trajetória selecionada + + + + Please select exactly one path object + Apenas uma trajetória deve ser selecionada + Path_Comment @@ -1791,11 +1902,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Por favor selecione uma trajetória - - - Please select a Path object - Por favor selecione uma trajetória - Dress-up @@ -1902,36 +2008,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create Dogbone Dress-up Criar ângulos adicionais de folga de trajetória (Dogbone Dressup) - - - Edit Dogbone Dress-up - Editar ângulos adicionais de folga de trajetória (Dogbone) - - - - Dogbone Dress-up - Distância de Canto de Trajetória Adicional (Dogbone) - - - - Creates a Dogbone Dress-up object from a selected path - Cria um afastamento de trajetória de objeto adicional de ângulos (Dogbone) do caminho selecionado - - - - Please select one path object - Por favor selecione uma trajetória - - - - The selected object is not a path - O objeto selecionado não é uma trajetória - - - - Create Dogbone Dress-up - Criar ângulos adicionais de folga de trajetória (Dogbone Dressup) - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create Dress-up Criar trajetória adicional (Dress-up) - - - DragKnife Dress-up - Corte tangencial da trajetória adicional - - - - Modifies a path to add dragknife corner actions - Editar uma trajetória para adicionar movimentos de ângulo para cortes tangenciais - - - - Please select one path object - Por favor selecione uma trajetória - - - - The selected object is not a path - O objeto selecionado não é uma trajetória - - - - Please select a Path object - Por favor selecione uma trajetória - - - - Create Dress-up - Criar trajetória adicional (Dress-up) - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - O estilo de Aproximação à trajetória - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Angle of ramp. Ângulo da rampa. + + + RampEntry Dress-up + Trajetória adicional da rampa de entrada + + + + Creates a Ramp Entry Dress-up object from a selected path + Cria um caminho de rampa de entrada adicional a partir da trajetória selecionada + + + + The base path to modify + O caminho de base para modificar + + + + Angle of ramp. + Ângulo da rampa. + + + + RampEntry Dress-up + Trajetória adicional da rampa de entrada + + + + Creates a Ramp Entry Dress-up object from a selected path + Cria um caminho de rampa de entrada adicional a partir da trajetória selecionada + Path_DressupTag - - - Tag Dress-up - Etiqueta de trajetória adicional - - - - Creates a Tag Dress-up object from a selected path - Cria etiqueta de trajetória adicional a partir de uma trajetória selecionada - The base path to modify @@ -2089,6 +2150,51 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Radius of the fillet for the tag. Raio do Boleado (fillet) para a etiqueta. + + + The base path to modify + O caminho de base para modificar + + + + Width of tags. + Largura das etiquetas. + + + + Tag Dress-up + Etiqueta de trajetória adicional + + + + Creates a Tag Dress-up object from a selected path + Cria etiqueta de trajetória adicional a partir de uma trajetória selecionada + + + + Radius of the fillet for the tag. + Raio do Boleado (fillet) para a etiqueta. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path Hop object Cria uma trajetória de salto - - - Please select one path object - - Por favor selecione uma trajetória - - The selected object is not a path @@ -2139,21 +2238,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci O objeto selecionado não é uma trajetória - - - Create Hop - Criar salto - - - - Creates a Path Hop object - Cria uma trajetória de salto - Please select one path object Por favor selecione uma trajetória + + + Create Hop + Criar salto + Path_Inspect @@ -2177,6 +2271,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Please select exactly one path object Apenas uma trajetória deve ser selecionada + + + Inspect G-code + Inspecionar G-Code + + + + Inspects the G-code contents of a path + Inspeciona o código G-Code de uma trajetória + Path_Job @@ -2246,6 +2350,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create a Selection Plane object Criar um plano de seleção + + + Create a Selection Plane object + Criar um plano de seleção + Path_Post @@ -2310,11 +2419,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Um Controlador de Ferramentas não foi encontrado. Valores padrão são usados, o que é perigoso. Por favor, adicione um Controlador de Ferramentas. - - - No issues detected, {} has passed basic sanity check. - Sem problemas detectados, {} passou a verificação de sanidade básica. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Complete loop selection from two edges Seleção de sequência completa das duas arestas - - - Finish Selecting Loop - Terminar a seleção de Loop - - - - Complete loop selection from two edges - Seleção de sequência completa das duas arestas - Path_SetupSheet @@ -2353,11 +2447,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Edit SetupSheet Editar SetupSheet - - - Edit SetupSheet - Editar SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a non-parametric copy of another path Cria uma cópia não-paramétricos de outra trajetória - - - Simple Copy - Cópia simples - - - - Creates a non-parametric copy of another path - Cria uma cópia não-paramétricos de outra trajetória - - - - Please select exactly one path object - Apenas uma trajetória deve ser selecionada - Path_Simulator @@ -2406,16 +2480,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Simulate Path G-Code on stock Simular uma trajetória G-Code no estoque - - - CAM Simulator - Simulador de CAM - - - - Simulate Path G-Code on stock - Simular uma trajetória G-Code no estoque - Path_Stop @@ -2448,7 +2512,7 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Esta operação requer a instalação do OpenCamLib. - + This operation requires OpenCamLib to be installed. Esta operação requer a instalação do OpenCamLib. @@ -2494,12 +2558,12 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Adicionar controlador de ferramenta para o trabalho - + Add Tool Controller to the Job Adicionar controlador de ferramenta para o trabalho - + Add Tool Controller Adicionar controlador de ferramenta @@ -2568,15 +2632,10 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Tabela de ferramentas LinuxCNC (*.tbl) - + Open tooltable Abrir tabela de ferramentas - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Tabela de ferramentas XML (*.xml);;tabela de ferramentas LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - O gcode a ser inserido - - - - The tool controller that will be used to calculate the path - O controlador de ferramenta que será usado para calcular a trajetória - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm index 0cff23511b..f28c2e24db 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index 3e3a511ae0..4cd8045ba2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -204,14 +204,14 @@ Habilitar picotar - - Height to clear top of material - Altura para limpar a parte superior do material + + Enable pecking + Habilitar picotar - - Diameters of the holes - Diâmetros dos furos + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Profundidade incremental da fresa antes de retrair para limpeza das aparas + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Habilitar picotar + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + A altura onde começa o avanço e altura quando a ferramenta é retraída no final da trajetória + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Plano de orientação do caminho do CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Perfilar furos redondos - - Orientation plane of CNC path - Plano de orientação do caminho do CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Perfilar furos redondos - - Profile holes as well as the outline - Perfilar furos assim como o seu contorno + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Ângulo do padrão em zigue-zague - - Maximum distance before a miter join is truncated - Distancia máxima antes de que uma junta a meia-esquadria ser cortada + + Percent of cutter diameter to step over on each pass + Percentagem do diâmetro da fresa para sobrepor a cada passagem - - Extra offset to apply to the operation. Direction is operation dependent. - Deslocamento extra para aplicar à operação. Direção é dependente de operação. + + Angle of the zigzag pattern + Ângulo do padrão em zigue-zague @@ -329,9 +349,9 @@ Método de geração do padrão (trama) - - Angle of the zigzag pattern - Ângulo do padrão em zigue-zague + + Add Optional or Mandatory Stop to the program + Adicionar paragem opcional ou obrigatória ao programa @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Avanço rápido para movimentos horizontais - - - Direction of spindle rotation - Sentido de rotação da fresa - - - - Feed rate for vertical moves in Z - Taxa de avanço para movimentos verticais em Z - - - - Feed rate for horizontal moves - Taxa de avanço para movimentos horizontais - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Editar + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Trabalho pai %s não tem um objeto base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Escolher Ponto Inicial + + + Heights + Alturas + + + + AreaOp Operation + Operação AreaOp + + + + Uncreate AreaOp Operation + Elimina Operação de AreaOp + + + + Pick Start Point + Escolher Ponto Inicial + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &trajetória - - - Path Dressup - Trajectória mascarada - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configuração do projeto - - - - Path Modification - Modificação da trajetória - - - - Helpful Tools - Ferramentas úteis - - - - &Path - &trajetória - - - - Path Dressup - Trajectória mascarada - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Editar - this object already in the list @@ -751,6 +839,14 @@ Criar um perfil baseado na seleção de arestas + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ nenhum trabalho para op %s encontrado. - + job %s has no Base. trabalho %s não tem nenhuma Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + O gcode para ser inserido + + + + The tool controller that will be used to calculate the path + O controlador de ferramenta que será usado para calcular a trajetória + + + + The gcode to be inserted + O gcode para ser inserido + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Perfuração + Creates a Path Drilling object from a features of a base object + Cria um objeto de trajetória de perfuração de um objeto de um objeto de base @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Entalhar @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Iniciar o corte do interior ou exterior - - - Creates a Path Helix object from a features of a base object - Cria um objeto de trajetória hélice de uma características de um objeto de base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Iniciar o corte do interior ou exterior - - - Radius increment (must be smaller than tool diameter) - Incremento de raio (deve ser menor que o diâmetro da ferramenta) - PathJob @@ -1023,9 +1119,24 @@ Tipo de armazenamento não suportado %s(%d) - - Stock not from Base bound box! - O armazenamento não respeita a caixa delimitadora do objeto base! + + Select the Post Processor + Selecione o Pós-processador + + + + Arguments for the Post Processor (specific to the script) + Argumentos para o pós-processador (específico para o script) + + + + Stock not a box! + O armazenamento não é uma caixa! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Para a computação de trajetórias; menor aumenta a precisão, mas abranda de computação @@ -1043,9 +1154,9 @@ Coleção de controladores de ferramenta disponíveis para este trabalho. - - Unsupported stock type %s (%d) - Tipo de armazenamento não suportado %s(%d) + + Select the Post Processor + Selecione o Pós-processador @@ -1053,9 +1164,9 @@ O ficheiro de saída NC para este projeto - - Select the Post Processor - Selecione o Pós-processador + + Arguments for the Post Processor (specific to the script) + Argumentos para o pós-processador (específico para o script) @@ -1063,9 +1174,9 @@ Folha de configurações para este trabalho - - An optional description for this job - Uma descrição opcional para este trabalho + + For computing Paths; smaller increases accuracy, but slows down computation + Para a computação de trajetórias; menor aumenta a precisão, mas abranda de computação @@ -1108,14 +1219,9 @@ Tipo de armazenamento não suportado - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Tarefas @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Posições de base para esta operação - - Holds the calculated value for the StartDepth - Contém o valor calculado para a profundidade inicial + + Holds the calculated value for the FinalDepth + Contém o valor calculado para a profundidade final @@ -1181,14 +1292,9 @@ Profundidade final da ferramenta - menor valor em Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Fazer Falso, para impedir a operação de gerar código - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Um comentário opcional para esta operação + + + + User Assigned Label + Etiqueta atribuída pelo utilizador + + + + Incremental Step Down of Tool + Passo incremental para baixo da ferramenta @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Verdadeiro, se especificar um ponto inicial - - - The tool controller that will be used to calculate the path - O controlador de ferramenta que será usado para calcular a trajetória - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Profundidades + + + Make True, if specifying a Start Point + Verdadeiro, se especificar um ponto inicial + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Cria uma trajetória de vazio (bolso) 3D de uma face ou faces - - - Vertical faces do not form a loop - ignoring - Faces verticais não formam uma sequência - ignorando - Pocket does not support shape %s.%s Vazio (bolso) não suporta a forma %s.%s + + + Vertical faces do not form a loop - ignoring + Faces verticais não formam uma sequência - ignorando + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Cria uma trajetória de vazio (bolso) de uma face ou faces - - - Vertical faces do not form a loop - ignoring - Faces verticais não formam uma sequência - ignorando - - - - Pocket does not support shape %s.%s - Vazio (bolso) não suporta a forma %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Extensão da passada - - - - The distance the facing operation will extend beyond the boundary shape. - A distância que a operação de faciamento se prolongará para além do contorno da forma. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Perfil de aresta - - - - Profile based on edges - Perfil baseado em arestas - - - - Face Profile - Perfil de face - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Versão do modelo de controlador de ferramenta não suportada %s - Error updating TC: %s Erro ao atualizar o TC: %s - - Error updating TC: %s - Erro ao atualizar o TC: %s + + Unsupported PathToolController template version %s + Versão do modelo de controlador de ferramenta não suportada %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Cria matriz a partir de caminho seleccionado + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Por favor selecione uma trajetória - - - Please select a Path object - Por favor selecione uma trajetória - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Criar mascara osso-de-cão - - - Edit Dogbone Dress-up - Editar mascara de osso-de-cão - - - - Dogbone Dress-up - Mascarar osso-de-cão - - - - Creates a Dogbone Dress-up object from a selected path - Cria um objeto osso-de-cão mascarado de uma trajectória selecionada - - - - Please select one path object - Por favor selecione uma trajetória - - - - The selected object is not a path - O objeto selecionado não é uma trajetória - - - - Create Dogbone Dress-up - Criar mascara osso-de-cão - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Cria Cobertura - - - DragKnife Dress-up - Mascarar DragKnife - - - - Modifies a path to add dragknife corner actions - Modifica um trajetória para adicionar ações de canto dragknife - - - - Please select one path object - Por favor selecione uma trajetória - - - - The selected object is not a path - O objeto selecionado não é uma trajetória - - - - Please select a Path object - Por favor selecione uma trajetória - - - - Create Dress-up - Cria Cobertura - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - O estilo de Aproximação à trajetória - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Ângulo da rampa. + + + RampEntry Dress-up + Mascara de Entrada-da-rampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Cria uma mascara de rampa de entrada de uma trajetória selecionada + + + + The base path to modify + O caminho de base para modificar + + + + Angle of ramp. + Ângulo da rampa. + + + + RampEntry Dress-up + Mascara de Entrada-da-rampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Cria uma mascara de rampa de entrada de uma trajetória selecionada + Path_DressupTag - - - Tag Dress-up - Etiqueta de mascara - - - - Creates a Tag Dress-up object from a selected path - Cria um objeto etiqueta de mascara de uma trajetória selecionada - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Raio do Boleado (fillet) para a etiqueta. + + + The base path to modify + O caminho de base para modificar + + + + Width of tags. + Largura das etiquetas. + + + + Tag Dress-up + Etiqueta de mascara + + + + Creates a Tag Dress-up object from a selected path + Cria um objeto etiqueta de mascara de uma trajetória selecionada + + + + Radius of the fillet for the tag. + Raio do Boleado (fillet) para a etiqueta. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Cria objeto de ressalto da trajetória - - - Please select one path object - - Por favor selecione uma trajetória - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper O objeto selecionado não é uma trajetória - - - Create Hop - Criar salto - - - - Creates a Path Hop object - Cria objeto de ressalto da trajetória - Please select one path object Por favor selecione uma trajetória + + + Create Hop + Criar salto + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspecionar código-G + + + + Inspects the G-code contents of a path + Inspeciona o conteúdo de código-G de um caminho + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Criar um plano de seleção + + + Create a Selection Plane object + Criar um plano de seleção + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - Sem problemas detectados, {} passou o teste de sanidade básica. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Seleção de sequência completa das duas arestas - - - Finish Selecting Loop - Terminar a seleção de sequência - - - - Complete loop selection from two edges - Seleção de sequência completa das duas arestas - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Editar Configuração - - - Edit SetupSheet - Editar Configuração - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Cria uma cópia não-paramétricos de outra trajetória - - - Simple Copy - Cópia simples - - - - Creates a non-parametric copy of another path - Cria uma cópia não-paramétricos de outra trajetória - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simular uma trajetória G-Code no armazenamento - - - CAM Simulator - Simulador de CAM - - - - Simulate Path G-Code on stock - Simular uma trajetória G-Code no armazenamento - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Adicionar controlador de ferramenta para o trabalho - + Add Tool Controller to the Job Adicionar controlador de ferramenta para o trabalho - + Add Tool Controller Adicionar controlador de ferramenta @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabela de ferramentas LinuxCNC (*.tbl) - + Open tooltable Abrir tabela de ferramentas - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabela de ferramentas XML (*.xml);;tabela de ferramentas LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - O gcode para ser inserido - - - - The tool controller that will be used to calculate the path - O controlador de ferramenta que será usado para calcular a trajetória - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm index b01623e8dd..54a2d29c66 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index be7191852f..e481ea965f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -204,14 +204,14 @@ Activează returul sculei - - Height to clear top of material - Height to clear top of material + + Enable pecking + Activează returul sculei - - Diameters of the holes - Diametre de găuri + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incrementul (pasul la avans) de adâncime la găurire, înainte de retragerea burghiului pentru eliminarea așchiilor/șpanului + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Activează returul sculei + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Înălţime de plecare a sculei și de retragere a sculei atunci când traiectoria activă s-a terminat + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientarea planului de lucru al parcursului CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profil de găuri rotunde - - Orientation plane of CNC path - Orientarea planului de lucru al parcursului CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profil de găuri rotunde - - Profile holes as well as the outline - Profilați găurile cât și conturul + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Unghiul la modelul zig-zag - - Maximum distance before a miter join is truncated - Distanța maximă înainte de cuplarea miterului (45 °) este trunchiată + + Percent of cutter diameter to step over on each pass + Avansul în procente din diametrul sculei tăietor la fiecare trecere - - Extra offset to apply to the operation. Direction is operation dependent. - Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație. + + Angle of the zigzag pattern + Unghiul la modelul zig-zag @@ -329,9 +349,9 @@ Metodă de operare - - Angle of the zigzag pattern - Unghiul la modelul zig-zag + + Add Optional or Mandatory Stop to the program + Adauga o oprire Opţională sau Obligatorie la program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Avans rapid pentru mișcări orizontale - - - Direction of spindle rotation - Sensul de rotație al frezei - - - - Feed rate for vertical moves in Z - Pasul Avansului pentru mișcări verticale pe Z - - - - Feed rate for horizontal moves - Pasul pentru mișcările pe orizontală - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Editare + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Editare + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Sarcina de lucru originală %s nu are un obiect de bază - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Unghiul muchiei tăietoare (%.2f) are ca rezultat o lungime negativă a vărfului sculei - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Selecționați punctul de plecare + + + Heights + Înălţimi + + + + AreaOp Operation + Operația AreaOp + + + + Uncreate AreaOp Operation + Nu creați operația Area Op + + + + Pick Start Point + Selecționați punctul de plecare + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Traiectorie - - - Path Dressup - Parcursul traiectoriei adiționale (Dressup) - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configurarea proiectului - - - - Path Modification - Modificare traiectoria - - - - Helpful Tools - Instrumente utile - - - - &Path - &Traiectorie - - - - Path Dressup - Parcursul traiectoriei adiționale (Dressup) - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Editare - this object already in the list @@ -751,6 +839,14 @@ Crea un contur de bază pe o muchie selctată + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ nu s-a găsit nicio sarcină de lucru pentru op " %s ". - + job %s has no Base. job %s nu are nicio bază. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Gcode de introdus + + + + The tool controller that will be used to calculate the path + Controlerul sculei care va utiizat pentru calcului traiectoriei + + + + The gcode to be inserted + Gcode de introdus + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Găurire + Creates a Path Drilling object from a features of a base object + Creează un obiect traiectorie de găurirea plecând de la o funcție a obiectului de bază @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Gravare @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Uzinajul începe din interior spre exterior - - - Creates a Path Helix object from a features of a base object - Creează un obiect traiectoriea Helix de caracteristici a unui obiect de bază - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Uzinajul începe din interior spre exterior - - - Radius increment (must be smaller than tool diameter) - Increment pe rază (trebuie să fie mai mic decât diametrul sculei) - PathJob @@ -1023,9 +1119,24 @@ Tip de semifabricat %s (%d) de Neacceptat - - Stock not from Base bound box! - Piesa de prelucrat nu vine din cadrul obiectului de bază! + + Select the Post Processor + Selecționați o post procesre + + + + Arguments for the Post Processor (specific to the script) + Argumente pentru Post procesare (specifice script-ul) + + + + Stock not a box! + Brutul nu o cutie! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Pentru calculul traiectoriei; o viteză mai mică crește acuratețea, dar încetinește computerul @@ -1043,9 +1154,9 @@ Colecţie de instrument controlerele disponibile pentru această sarcină de muncă. - - Unsupported stock type %s (%d) - Tip de semifabricat %s (%d) de Neacceptat + + Select the Post Processor + Selecționați o post procesre @@ -1053,9 +1164,9 @@ Fişierul de ieşire NC pentru acest proiect - - Select the Post Processor - Selecționați o post procesre + + Arguments for the Post Processor (specific to the script) + Argumente pentru Post procesare (specifice script-ul) @@ -1063,9 +1174,9 @@ Fișă de control a parametrilor pentru această sarcină de muncă - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + Pentru calculul traiectoriei; o viteză mai mică crește acuratețea, dar încetinește computerul @@ -1108,14 +1219,9 @@ Tip de semifabricat respins ca piesă de bază - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,8 +1277,8 @@ Locatii de bază pentru această operaţie - - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth Conţine valoarea calculată pentru StartDepth @@ -1181,14 +1292,9 @@ Adâncimea finala a sculei - valoarea minima a lui Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Selectează "False" pentru a preveni generarea codului - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Un comentariu opțional pentru această Operaţie + + + + User Assigned Label + Etichetă asignată de către utilizator + + + + Incremental Step Down of Tool + Incrementarea pasului uneltei spre mai jos @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Marchează « true » dacă este spedificat un Punct de Plecare - - - The tool controller that will be used to calculate the path - Controlerul sculei care va utiizat pentru calcului traiectoriei - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Adâncimea + + + Make True, if specifying a Start Point + Marchează « true » dacă este spedificat un Punct de Plecare + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creează o traiectorie 3D plecând de la muchiile unui buzunar, fațetă sau fațete - - - Vertical faces do not form a loop - ignoring - Fațetele verticale nu formează o buclă - sunt ignorate - Pocket does not support shape %s.%s Buzunar nu acceptă forma %s.%s + + + Vertical faces do not form a loop - ignoring + Fațetele verticale nu formează o buclă - sunt ignorate + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creează un obiect tip buzunar plecând de la muchii sau o suprafață - - - Vertical faces do not form a loop - ignoring - Fațetele verticale nu formează o buclă - sunt ignorate - - - - Pocket does not support shape %s.%s - Buzunar nu acceptă forma %s.%s - - - - Adaptive clearing and profiling - Curățare și profilare adaptată - - - - Pass Extension - Adăugați o extensie - - - - The distance the facing operation will extend beyond the boundary shape. - Operarea fațetei se va extinde dincolo de limita suprafeței acesteia. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Profil de muchie - - - - Profile based on edges - Profil bazat pe margini - - - - Face Profile - Profil de față - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Se respinge această versiune de șablon PathStockt {} - Error updating TC: %s Eroare la actualizarea ratelor: %s - - Error updating TC: %s - Eroare la actualizarea ratelor: %s + + Unsupported PathToolController template version %s + Se respinge această versiune de șablon PathStockt {} @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Rugăm selectați doar un obiect tip traiectorie + + + Creates an array from a selected path + Creează o matrice pornind la o traiectorie selectată + + + + Please select exactly one path object + Rugăm selectați doar un obiect tip traiectorie + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Rugăm selectați doar un obiect Traiectorie - - - Please select a Path object - Vă rugăm să selectaţi un obiect traiecorie - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Creează o traiectorie adițională de degajare a colțurilor interioare (Dogbone Dressup) - - - Edit Dogbone Dress-up - Editați traiectoria adițională Degajarea unghiurilor (Dogbone) - - - - Dogbone Dress-up - Traiectorie adițională Degajarea unghiurilor (Dogbone) - - - - Creates a Dogbone Dress-up object from a selected path - Crează un frezare în colț suplimentară plecând de la o traiectorie selectată - - - - Please select one path object - Vă rugăm să selectaţi o traiectori tip obiect - - - - The selected object is not a path - Obiectul selectat nu este o traiectorie - - - - Create Dogbone Dress-up - Creează o traiectorie adițională de degajare a colțurilor interioare (Dogbone Dressup) - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Crează o traiectorie adițională (Dress-up) - - - DragKnife Dress-up - Traiectorie adițională a cuțitului tangențial - - - - Modifies a path to add dragknife corner actions - Modifică o traiectorie pentru a adăuga mișcările de colț pentru cuțitul tangențial - - - - Please select one path object - Vă rugăm să selectaţi o traiectori tip obiect - - - - The selected object is not a path - Obiectul selectat nu este o traiectorie - - - - Please select a Path object - Vă rugăm să selectaţi un obiect traiecorie - - - - Create Dress-up - Crează o traiectorie adițională (Dress-up) - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Stilul traiectoriei de apopiere - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Unghiul de rampă. + + + RampEntry Dress-up + Traiectorie adițională rampă de intrare în material + + + + Creates a Ramp Entry Dress-up object from a selected path + Creează un obiect de rampă de intrare în material pornind de la o traiectorie selcetată + + + + The base path to modify + Traiectoria de bază de modificat + + + + Angle of ramp. + Unghiul de rampă. + + + + RampEntry Dress-up + Traiectorie adițională rampă de intrare în material + + + + Creates a Ramp Entry Dress-up object from a selected path + Creează un obiect de rampă de intrare în material pornind de la o traiectorie selcetată + Path_DressupTag - - - Tag Dress-up - Etichetă de traiectorie suplimentră - - - - Creates a Tag Dress-up object from a selected path - Creează un obiect etichetă a traiectoriei adiționale plecând de la parcursul selectat - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Raza de racord pentru etichete. + + + The base path to modify + Traiectoria de bază de modificat + + + + Width of tags. + Lăţimea de Tag-uri. + + + + Tag Dress-up + Etichetă de traiectorie suplimentră + + + + Creates a Tag Dress-up object from a selected path + Creează un obiect etichetă a traiectoriei adiționale plecând de la parcursul selectat + + + + Radius of the fillet for the tag. + Raza de racord pentru etichete. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creează un obiect salt - - - Please select one path object - - Rugăm selectați doar un obiect Traiectorie - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Obiectul selectat nu este o traiectorie - - - Create Hop - Creați un salt - - - - Creates a Path Hop object - Creează un obiect salt - Please select one path object Vă rugăm să selectaţi o traiectori tip obiect + + + Create Hop + Creați un salt + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Rugăm selectați doar un obiect tip traiectorie + + + Inspect G-code + Inspectează G-code + + + + Inspects the G-code contents of a path + Inspectează conţinutul traiectoriei definită de G-code + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Crearea unui obiect Plan de Selecție + + + Create a Selection Plane object + Crearea unui obiect Plan de Selecție + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - Fără probleme detectate, {} a trecut de o verificare de bază. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Buclă de selecție completă plecând din două muchii - - - Finish Selecting Loop - Termină bucla selcției - - - - Complete loop selection from two edges - Buclă de selecție completă plecând din două muchii - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Editare SetupSheet - - - Edit SetupSheet - Editare SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creează o copie non-parametrice pe o altă traiectorie - - - Simple Copy - Copie simplă - - - - Creates a non-parametric copy of another path - Creează o copie non-parametrice pe o altă traiectorie - - - - Please select exactly one path object - Rugăm selectați doar un obiect tip traiectorie - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulează traiectoria g-Code în material - - - CAM Simulator - Simulator CAM - - - - Simulate Path G-Code on stock - Simulează traiectoria g-Code în material - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Această operație necesită ca biblioteca OpenCamLib să fie instalată. - + This operation requires OpenCamLib to be installed. Această operație necesită ca biblioteca OpenCamLib să fie instalată. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Adaugă controler de sculă pentru sarcina de muncă - + Add Tool Controller to the Job Adaugă controler de sculă pentru sarcina de muncă - + Add Tool Controller Adăugare dispozitiv de control a sculei @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabelă de scule LinuxCNC (*.tbl) - + Open tooltable Deschide tabela de scule - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tabela de scule XML (*.xml);Masă de scule HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tabela de scule XML (*.xml);Masă de scule HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tabela de scule XML (*.xml);;Tabelă de scule HeeksCAD (*.tooltable) - - PathCustom - - - The gcode to be inserted - Gcode de introdus - - - - The tool controller that will be used to calculate the path - Controlerul sculei care va utiizat pentru calcului traiectoriei - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm index 05cfc3f11c..645fe196ba 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index ef29eefed8..e492b2c680 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Планарное: плоское, трехмерной сканирование поверхности. Вращательное: 4-осное вращательное сканирование. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + Режим завершения обработки: одно- или многопроходная The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Направление, по которому должен обойти деталь инструмент по часовой стрелке или против часовой стрелки Clearing pattern to use - Clearing pattern to use + Очистка шаблона для использования The model will be rotated around this axis. - The model will be rotated around this axis. + Модель будет вращаться вокруг этой оси. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Начальный индекс (угол) для вращающегося сканирования Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Конечный индекс (угол) для вращающегося сканирования @@ -76,22 +76,22 @@ Enable optimization which removes unnecessary points from G-Code output - Включить оптимизацию, которая удаляет лишние точки из выходного G-кода + Включить оптимизацию, которая удаляет лишние точки из выходного Г-кода (G-Code) Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Игнорировать области, которые идут ниже указанной глубины. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Глубина, используемая для выявления областей отходов, чтобы игнорировать. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Резать через отходы до глубины края модели, освобождая модель. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Использовать компенсацию радиуса резца машины /инструмент смещения траектории G41/G42 @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Должны ли доп. пути игнорировать движения выше глубины начала применения доп. путей (DressupStartDepth) @@ -203,40 +203,60 @@ Enable pecking Включить сворачивание - - - Height to clear top of material - Высота очистки верхней части материала - - - - Diameters of the holes - Диаметры отверстий - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - инкрементальный шаг заглубления сверла для вывода стружки - Enable pecking Включить сворачивание - + + Enable dwell + Включить задержку (dwell) + + + + Calculate the tip length and subtract from final depth + Рассчитать длину кончика и вычесть из окончательной глубины + + + + Calculate the tip length and subtract from final depth + Рассчитать длину кончика и вычесть из окончательной глубины + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Высота на которой начинается подача и высота на которую возвращается инструмент по окончании прохождения пути + + + + Shape to use for calculating Boundary + Форма, используемая для расчета границы + + + Orientation plane of CNC path Плоскость обработки ЧПУ пути - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Форма, используемая для расчета границы + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Профиль круглые отверстия - - Orientation plane of CNC path - Плоскость обработки ЧПУ пути + + The base object this collision refers to + Базовый объект, к которому относится это столкновение - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Профиль круглые отверстия - - Profile holes as well as the outline - Профиль отверстия, а также наброски + + The base object this collision refers to + Базовый объект, к которому относится это столкновение @@ -309,14 +329,14 @@ Угол наклона зигзагообразного узора - - Maximum distance before a miter join is truncated - Максимальное расстояние до усечения стыка + + Percent of cutter diameter to step over on each pass + Процент диаметра фрезы для шага на каждом проходе - - Extra offset to apply to the operation. Direction is operation dependent. - Дополнительное смещение применяется к операции. Направление зависит от операции. + + Angle of the zigzag pattern + Угол наклона зигзагообразного узора @@ -329,9 +349,9 @@ Метод шаблона - - Angle of the zigzag pattern - Угол наклона зигзагообразного узора + + Add Optional or Mandatory Stop to the program + Добавить вспомогательную или обязательную точку остановки программы @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Скорость подачи для горизонтальных перемещений - - - Direction of spindle rotation - Направление вращения шпинделя - - - - Feed rate for vertical moves in Z - Скорость подачи для вертикальных перемещений по оси Z - - - - Feed rate for horizontal moves - Скорость подачи для горизонтальных перемещений - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Редактировать + + + + %s is not a Base Model object of the job %s + %s не является базовым объектом для задания %s + + + + Base shape %s already in the list + Базовая фигура %s уже в списке + + + + Ignoring vertex + Игнорирование вертекса + + + + Edit + Редактировать + + + + %s is not a Base Model object of the job %s + %s не является базовым объектом для задания %s + Didn't find job %s @@ -587,19 +622,14 @@ Родительское задание %s не имеет базового объекта - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Угол режущей кромки (%.2f) приводит к отрицательной длине наконечника инструмента - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Неверный угол режущей кромки %.2f, должен быть >0° и <=180° @@ -621,6 +651,109 @@ Pick Start Point Указать начальную точку + + + Heights + Высоты + + + + AreaOp Operation + AreaOp операция + + + + Uncreate AreaOp Operation + Отмена AreaOp операции + + + + Pick Start Point + Указать начальную точку + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path & Траектория - - - Path Dressup - Путь Дополнительной траектории (Dressup) - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Настройка проекта - - - - Path Modification - Модификация траектории - - - - Helpful Tools - Вспомогательные инструменты - - - - &Path - & Траектория - - - - Path Dressup - Путь Дополнительной траектории (Dressup) - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Редактировать - this object already in the list @@ -751,6 +839,14 @@ Создание профиля по граням + + PathAdaptive + + + Adaptive + Адаптивный + + PathAreaOp @@ -764,17 +860,45 @@ не найдено задания для оп %s. - + job %s has no Base. задание %s не имеет Базу. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Gcode будет вставлен + + + + The tool controller that will be used to calculate the path + Контроллер инструмента, который будет использоваться для расчёта пути + + + + The gcode to be inserted + Gcode будет вставлен + + + + PathDeburr + + + The desired width of the chamfer + Желаемая ширина фаски + + + + The additional depth of the tool path + Дополнительная глубина траектории инструмента + + + + Deburr + Сглаживать @@ -851,8 +975,8 @@ - Drilling - Сверление + Creates a Path Drilling object from a features of a base object + Создание траектории сверления объекта по особенностям базового объекта @@ -870,25 +994,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Дополнительные базовые объекты для гравировки - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Гравировка @@ -962,7 +1073,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + Направление круговых вырезов по часовой стрелке (clockwise - CW) или против часовой стрелки (counter clockwise - CCW) @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Начать резку изнутри или снаружи - - - Creates a Path Helix object from a features of a base object - Создает ПутьСпираль из элементов базового объекта - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Начать резку изнутри или снаружи - - - Radius increment (must be smaller than tool diameter) - Приращение радиуса (должно быть меньше диаметра инструмента) - PathJob @@ -1023,9 +1119,24 @@ Неподдерживаемый тип заготовки %s (%d) - - Stock not from Base bound box! - Заготовка не из базового ограничивающего объёма! + + Select the Post Processor + Выберите пост процессор + + + + Arguments for the Post Processor (specific to the script) + Аргументы для постпроцессора (специфические для скрипта) + + + + Stock not a box! + Заготовка не блок! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Для вычисления Траектории; меньше - увеличивает точность, но замедляет вычисления @@ -1043,9 +1154,9 @@ Коллекция контроллеров инструментов, доступных для этого задания. - - Unsupported stock type %s (%d) - Неподдерживаемый тип заготовки %s (%d) + + Select the Post Processor + Выберите пост процессор @@ -1053,9 +1164,9 @@ Выходной файл УП данного проекта - - Select the Post Processor - Выберите пост процессор + + Arguments for the Post Processor (specific to the script) + Аргументы для постпроцессора (специфические для скрипта) @@ -1063,9 +1174,9 @@ УстановочныйЛист содержащий настройки задания - - An optional description for this job - Необязательное описание для этой работы + + For computing Paths; smaller increases accuracy, but slows down computation + Для вычисления Траектории; меньше - увеличивает точность, но замедляет вычисления @@ -1108,14 +1219,9 @@ Неподдерживаемый тип заготовки - - 2D - Двумерное - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - База -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Задания @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Хранит максимальное значение Z заготовки + + + Holds the min Z value of Stock + Хранит минимальное значение Z заготовки + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Базовое расположение для этой операции - - Holds the calculated value for the StartDepth - Содержит значение, вычисленное для Стартовой Глубины + + Holds the calculated value for the FinalDepth + Содержит значение, вычисленное для Финальной глубины @@ -1181,14 +1292,9 @@ Конечная глубина инструмента - нижнее значение по оси Z - - Holds the max Z value of Stock - Хранит максимальное значение Z заготовки - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Начальная глубина внутреннего использования только для расчетных значений @@ -1196,9 +1302,19 @@ Установите значение в False, чтобы предотвратить генерацию G-кода для операции - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Необязательный комментарий для этой операции + + + + User Assigned Label + Пользовательская Метка + + + + Incremental Step Down of Tool + Наращиваемое погружение инструмента @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point установить в Истину если указывается начальная точка - - - The tool controller that will be used to calculate the path - Контроллер инструмента, который будет использоваться для расчёта пути - Base Geometry @@ -1241,6 +1352,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Глубины + + + Make True, if specifying a Start Point + установить в Истину если указывается начальная точка + PathPocket @@ -1254,16 +1370,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Создаёт Путь обработки трёхмерного кармана используя контур состоящий из рёбер или из грани - - - Vertical faces do not form a loop - ignoring - Вертикальные грани не образуют петлю - игнорирование - Pocket does not support shape %s.%s Карман не поддерживает формы %s.%s + + + Vertical faces do not form a loop - ignoring + Вертикальные грани не образуют петлю - игнорирование + Adaptive clearing and profiling @@ -1304,31 +1420,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани - - - Vertical faces do not form a loop - ignoring - Вертикальные грани не образуют петлю - игнорирование - - - - Pocket does not support shape %s.%s - Карман не поддерживает формы %s.%s - - - - Adaptive clearing and profiling - Адаптивная очистка и профилирование - - - - Pass Extension - Припуск - - - - The distance the facing operation will extend beyond the boundary shape. - Припуском называется толщина лишнего слоя, оставляемого на поверхности заготовки для последующей обработки резанием. - Generating toolpath with libarea offsets. @@ -1344,40 +1435,25 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Использует контур базовой геометрии. Default length of extensions. - Default length of extensions. + Длина по умолчанию для расширений. List of features to extend. - List of features to extend. + Список элементов для расширения. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Если включено соседние ребра расширения объединяются в ломаные (многоточечные) линии. @@ -1402,26 +1478,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Профиль основанный на грани или гранях - - - Edge Profile - Кривой профиль - - - - Profile based on edges - Профиль на основе кривой - - - - Face Profile - Профиль Грани - - - - Profile based on face or faces - Профиль основанный на грани или гранях - The tool number in use @@ -1599,12 +1655,62 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Скорость быстрых горизонтальных перемещений по умолчанию. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Скорость быстрых вертикальных перемещений по умолчанию. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Использование этого поля зависит от SafeHeightExpression - по умолчанию его значение добавляется к начальной глубине (StartDepth) и используется для безопасной высоты (SafeHeight) операции. + + + + Expression set for the SafeHeight of new operations. + Уравнение для расчета безопасной высоты (SafeHeight) новых операций. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Использование этого поля зависит от ClearanceHeightExpression - по умолчанию его значение добавляется к начальной глубине (StartDepth) и используется для высоты зазора (ClearanceHeight) операции. + + + + Expression set for the ClearanceHeight of new operations. + Уравнение для расчета высоты зазора (ClearanceHeight ) новых операций. + + + + Default speed for horizontal rapid moves. + Скорость быстрых горизонтальных перемещений по умолчанию. + + + + Default speed for vertical rapid moves. + Скорость быстрых вертикальных перемещений по умолчанию. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + Использование этого поля зависит от SafeHeightExpression - по умолчанию его значение добавляется к начальной глубине (StartDepth) и используется для безопасной высоты (SafeHeight) операции. + + + + Expression set for the SafeHeight of new operations. + Уравнение для расчета безопасной высоты (SafeHeight) новых операций. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + Использование этого поля зависит от ClearanceHeightExpression - по умолчанию его значение добавляется к начальной глубине (StartDepth) и используется для высоты зазора (ClearanceHeight) операции. + + + + Expression set for the ClearanceHeight of new operations. + Уравнение для расчета высоты зазора (ClearanceHeight ) новых операций. @@ -1682,20 +1788,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Неподдерживаемый шаблон Контроллера Пути Инструмента версии %s - Error updating TC: %s Ошибка при обновлении TC: %s - - Error updating TC: %s - Ошибка при обновлении TC: %s + + Unsupported PathToolController template version %s + Неподдерживаемый шаблон Контроллера Пути Инструмента версии %s @@ -1731,6 +1832,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Пожалуйста выберете лишь один объект типа путь + + + Creates an array from a selected path + Создает массив из выбранного пути + + + + Please select exactly one path object + Пожалуйста выберете лишь один объект типа путь + Path_Comment @@ -1790,11 +1901,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Пожалуйста выберете один объект пути - - - Please select a Path object - Пожалуйста выберите Путь объект - Dress-up @@ -1901,36 +2007,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Создание СобакаКости ДопТраектории - - - Edit Dogbone Dress-up - Редактирование СобакаКости ДопТраектории - - - - Dogbone Dress-up - СобакаКости ДопТраектории - - - - Creates a Dogbone Dress-up object from a selected path - Создать объект СобакаКости дополнительной траектории из выбранного пути - - - - Please select one path object - Пожалуйста выберете один объект пути - - - - The selected object is not a path - Выделенный объект не является путём - - - - Create Dogbone Dress-up - Создание СобакаКости ДопТраектории - Path_DressupDragKnife @@ -1964,36 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Создать ДопПуть - - - DragKnife Dress-up - ТащиНож ДопТраектории - - - - Modifies a path to add dragknife corner actions - Изменяет путь для добавления угловых действий ТащиНож - - - - Please select one path object - Пожалуйста выберете один объект пути - - - - The selected object is not a path - Выделенный объект не является путём - - - - Please select a Path object - Пожалуйста выберите Путь объект - - - - Create Dress-up - Создать ДопПуть - Path_DressupLeadInOut @@ -2005,37 +2051,32 @@ If it is necessary to set the FinalDepth manually please select a different oper The Style of LeadOut the Path - The Style of LeadOut the Path + Стиль Пути Отвода The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - Стиль Пути Подвода - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Режим Точки РадиусСмещения или Центр LeadInOut Dressup - LeadInOut Dressup + Доп. пути отвода/подвода инструмента Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Создает объект компенсации радиуса резца G41/G42 из выделенной траектории + + + + LeadInOut Dressup + Доп. пути отвода/подвода инструмента + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Создает объект компенсации радиуса резца G41/G42 из выделенной траектории @@ -2050,19 +2091,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Угол наклона входа. + + + RampEntry Dress-up + НаклонВхода ДопТраектории + + + + Creates a Ramp Entry Dress-up object from a selected path + Создать объект НаклонВхода ДопТраектории из выбранного пути + + + + The base path to modify + Базовый путь для модификации + + + + Angle of ramp. + Угол наклона входа. + + + + RampEntry Dress-up + НаклонВхода ДопТраектории + + + + Creates a Ramp Entry Dress-up object from a selected path + Создать объект НаклонВхода ДопТраектории из выбранного пути + Path_DressupTag - - - Tag Dress-up - Тэг ДопПути - - - - Creates a Tag Dress-up object from a selected path - Создать Тэг ДопПути объект из выбранного пути - The base path to modify @@ -2088,6 +2149,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Радиус скругления тэга. + + + The base path to modify + Базовый путь для модификации + + + + Width of tags. + Ширина тэга. + + + + Tag Dress-up + Тэг ДопПути + + + + Creates a Tag Dress-up object from a selected path + Создать Тэг ДопПути объект из выбранного пути + + + + Radius of the fillet for the tag. + Радиус скругления тэга. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2124,13 +2230,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Создает объект шага пути - - - Please select one path object - - Пожалуйста выберете один объект пути - - The selected object is not a path @@ -2138,21 +2237,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Выделенный объект не является путём - - - Create Hop - Создать Шаг - - - - Creates a Path Hop object - Создает объект шага пути - Please select one path object Пожалуйста выберете один объект пути + + + Create Hop + Создать Шаг + Path_Inspect @@ -2176,6 +2270,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Пожалуйста выберете лишь один объект типа путь + + + Inspect G-code + Исследовать G-code + + + + Inspects the G-code contents of a path + Проверяет содержимое G-кода пути + Path_Job @@ -2245,6 +2349,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Создание объекта выбранной плоскости + + + Create a Selection Plane object + Создание объекта выбранной плоскости + Path_Post @@ -2309,11 +2418,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Не найден Контроллер Инструмента. Используются значения по умолчанию, которые опасны. Пожалуйста, добавьте Контроллер Инструмента. - - - No issues detected, {} has passed basic sanity check. - Не обнаружено никаких проблем, {} прошел базовую проверку работоспособности. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2334,16 +2438,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Полный цикл выбора из двух краев - - - Finish Selecting Loop - Закончить выбор цикла - - - - Complete loop selection from two edges - Полный цикл выбора из двух краев - Path_SetupSheet @@ -2352,11 +2446,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Редактировать лист настроек - - - Edit SetupSheet - Редактировать лист настроек - Path_SimpleCopy @@ -2377,21 +2466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Создает непараметрическую копию другого пути - - - Simple Copy - Простое копирование - - - - Creates a non-parametric copy of another path - Создает непараметрическую копию другого пути - - - - Please select exactly one path object - Пожалуйста выберете лишь один объект типа путь - Path_Simulator @@ -2405,16 +2479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Симуляция Пути G-кода по заготовке - - - CAM Simulator - CAM Симулятор - - - - Simulate Path G-Code on stock - Симуляция Пути G-кода по заготовке - Path_Stop @@ -2447,7 +2511,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Эта операция требует установки OpenCamLib. - + This operation requires OpenCamLib to be installed. Эта операция требует установки OpenCamLib. @@ -2493,12 +2557,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Добавить Контроллер Инструмента к Заданию - + Add Tool Controller to the Job Добавить Контроллер Инструмента к Заданию - + Add Tool Controller Добавить Контроллер Инструмента @@ -2567,15 +2631,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Таблица инструментов LinuxCNC (*.tbl) - + Open tooltable Открыть таблицу инструментов - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Таблица инструментов XML (*.xml); Таблица инструментов HeeksCAD (*.tooltable) - Save tooltable @@ -2614,7 +2673,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable editor - Редактор таблицы инструмента + Редактор таблицы инструментов @@ -2816,6 +2875,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm мм + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Таблица инструментов XML (*.xml); Таблица инструментов HeeksCAD (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Таблица инструментов XML (*.xml);;Таблица инструментов LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - Gcode будет вставлен - - - - The tool controller that will be used to calculate the path - Контроллер инструмента, который будет использоваться для расчёта пути - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.qm b/src/Mod/Path/Gui/Resources/translations/Path_sk.qm index 4023ba7771..c0a66f6b3e 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sk.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts index 16aebf0b59..f80b579c6b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Upraviť + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Upraviť + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Upraviť - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Drilling + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm index 2007caee3f..b1a2098325 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index 01f0a85032..c74d16cb66 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Višina za očiščenje zgornje plasti gradiva + + Enable pecking + Enable pecking - - Diameters of the holes - Premeri lukenj + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Korak globine vrtanja pred povratkom za čiščenje ostružkov + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Višina začetka podajanja in višina povratka orodja, ko je pot končana + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Usmerjevalna ravnina poti CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profiliraj okrogle luknje - - Orientation plane of CNC path - Usmerjevalna ravnina poti CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profiliraj okrogle luknje - - Profile holes as well as the outline - Profiliraj luknje kakor tudi oris + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Kot cik-cak vzorca - - Maximum distance before a miter join is truncated - Največja razdalja preden je miter spoj prirezan + + Percent of cutter diameter to step over on each pass + Delež povečanja premera rezalnika v vsakem prehodu - - Extra offset to apply to the operation. Direction is operation dependent. - Dodaten odmik za uporabo pri delovanju. Smer je odvisna od delovanja. + + Angle of the zigzag pattern + Kot cik-cak vzorca @@ -329,9 +349,9 @@ Metoda vzorca - - Angle of the zigzag pattern - Kot cik-cak vzorca + + Add Optional or Mandatory Stop to the program + Doda izbirno ali obvezno ustavitev programa @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Hitra stopnja za vodoravne pomike - - - Direction of spindle rotation - Smer vrtenja vretena - - - - Feed rate for vertical moves in Z - Hitrost podajanja za navpične premike v smeri Z - - - - Feed rate for horizontal moves - Hitrost podajanja vodoravnih premikov - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Uredi + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Uredi + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Izberite Začetno Točko + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Izberite Začetno Točko + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Nastavitev projekta - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Uredi - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Vstavljanje G-kode + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + Vstavljanje G-kode + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Vrtanje + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ Izhodna datoteka NC tega projekta - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Končna globina orodja - najnižja vrednost v smeri Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Naredi Napak, da se opravilu prepreči ustvarjanje kode - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Dolžina koraka orodja @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Naredi Resnično, če je določena začetna točka - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Globine + + + Make True, if specifying a Start Point + Naredi Resnično, če je določena začetna točka + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Prerez ploskve - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Ustvari vzorec iz izbrane poti + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Izberite eno pot - - - Please select a Path object - Izberite pot - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Ustvari prilagoditev - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Izberite pot - - - - Create Dress-up - Ustvari prilagoditev - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Slog uvedbe v pot - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + Osnovna pot za spremembo + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + Osnovna pot za spremembo + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Ustvari objekt skoka poti - - - Please select one path object - - Izberite eno pot - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Izbrani objekt ni pot - - - Create Hop - Ustvari skok - - - - Creates a Path Hop object - Ustvari objekt skoka poti - Please select one path object Please select one path object + + + Create Hop + Ustvari skok + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Preglej G-kodo + + + + Inspects the G-code contents of a path + Pregleda G-kodo poti + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Ustvari objekt izbirne ravnine + + + Create a Selection Plane object + Ustvari objekt izbirne ravnine + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Ustvari neparametrično kopijo druge poti - - - Simple Copy - Preprosta kopija - - - - Creates a non-parametric copy of another path - Ustvari neparametrično kopijo druge poti - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Odpri preglednico orodij - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Preglednica orodij XML (*.xml);;preglednica orodij HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Preglednica orodij XML (*.xml);;preglednica orodij HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - Vstavljanje G-kode - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm index d9e47af3c3..051a3f2f9f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index c19a25f0f5..8b4254e179 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Измени + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Измени + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Поcтавке Пројекта - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Измени - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Бушење + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ NC излазна датотека за овај пројекат - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Учините Лажним, cпречите радњу да генерише код - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Одаберите један објекат путање - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Одаберите један објекат путање - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm мм + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm index 232eb64a8f..48a01e3fce 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index f12813e3eb..a452b783c4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Redigera + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Redigera + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Välj startpunkt + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Välj startpunkt + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Projektinställning - - - - Path Modification - Path Modification - - - - Helpful Tools - Hjälpsamma verktyg - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Redigera - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Borrning + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Select the Post Processor + + + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Select the Post Processor @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Select the Post Processor + + Arguments for the Post Processor (specific to the script) + Arguments for the Post Processor (specific to the script) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Kantprofil - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm index 267ff4c99f..0ab88d5ab6 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 1d0f61d50a..87b8f5cd2a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -204,14 +204,14 @@ Gagalama etkinleştirmek - - Height to clear top of material - Malzemenin üstünü temizlemek için yükseklik + + Enable pecking + Gagalama etkinleştirmek - - Diameters of the holes - Dosya adı + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Temiz cipslere geri çekmeden önce artımlı Matkap derinliği + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Gagalama etkinleştirmek + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Yem başlama yüksekliği ve yol bittiğinde geri çekme aracı sırasında yükseklik + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path CNC yollarının yönlendirme düzlemi - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profil yuvarlak delikleri - - Orientation plane of CNC path - CNC yollarının yönlendirme düzlemi + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profil yuvarlak delikleri - - Profile holes as well as the outline - Profil delikleri ve anahat + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Zikzak deseninin açısı - - Maximum distance before a miter join is truncated - Bir gönyeli birleştirme öncesi azami mesafe kesiliyor + + Percent of cutter diameter to step over on each pass + Her geçide adım atacak kesici çapı yüzdesi - - Extra offset to apply to the operation. Direction is operation dependent. - İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır. + + Angle of the zigzag pattern + Zikzak deseninin açısı @@ -329,9 +349,9 @@ Desen yöntemi - - Angle of the zigzag pattern - Zikzak deseninin açısı + + Add Optional or Mandatory Stop to the program + İsteğe Bağlı veya Zorunlu Durdur programına ekleyin @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Yatay hareketler için hızlı oran - - - Direction of spindle rotation - İş mili dönüş yönü - - - - Feed rate for vertical moves in Z - Z'de dikey hareketler için besleme hızı - - - - Feed rate for horizontal moves - Yatay hareketler için besleme hızı - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Düzenle + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Düzenle + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Üst iş %s bir temel nesne yok - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Kenar kesme açısı (%.2f) negatif araç ipucu uzunluğu sonuç - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Hedef noktası seç + + + Heights + Yükseklik + + + + AreaOp Operation + AreaOp işlemi + + + + Uncreate AreaOp Operation + AreaOp işlemi uncreate + + + + Pick Start Point + Hedef noktası seç + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path Yol - - - Path Dressup - Yol Giydir - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Proje kurulumu - - - - Path Modification - Yol Değişikliği - - - - Helpful Tools - Yararlı araçlar - - - - &Path - Yol - - - - Path Dressup - Yol Giydir - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Düzenle - this object already in the list @@ -751,6 +839,14 @@ Kenar seçimi temel alınarak bir profil oluşturmak + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ buldum op %s iş yok. - + job %s has no Base. iş %s yok tabanı vardır. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Eklenecek gcode + + + + The tool controller that will be used to calculate the path + Yolu hesaplamak için kullanılacak takım denetleyicisi + + + + The gcode to be inserted + Eklenecek gcode + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Sondaj + Creates a Path Drilling object from a features of a base object + Bir temel nesnenin özelliklerinden bir Yol Sondaj nesnesi oluşturur @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Oymak @@ -974,26 +1085,11 @@ Start cutting from the inside or outside İçten veya dıştan kesmeye başlayın - - - Creates a Path Helix object from a features of a base object - Bir temel nesnenin özelliklerinden bir Yol Sondaj nesnesi oluşturur - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside İçten veya dıştan kesmeye başlayın - - - Radius increment (must be smaller than tool diameter) - Yarıçap artışı (takım çapından daha küçük olmalıdır) - PathJob @@ -1023,9 +1119,24 @@ Desteklenmeyen dosya biçimi) - - Stock not from Base bound box! - Stok temel ilişkili kutusundan değil! + + Select the Post Processor + İşlem Sonucu Seçme + + + + Arguments for the Post Processor (specific to the script) + Post İşlemci İçin Argümanlar (komuta özgü) + + + + Stock not a box! + Stok kutusu değil! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Hesaplama yolları için; daha küçük değerler doğruluğu artırır, ancak hesaplamayı yavaşlatır @@ -1043,9 +1154,9 @@ Bu iş için kullanılabilen takım denetleyicileri topluluğu. - - Unsupported stock type %s (%d) - Desteklenmeyen dosya biçimi) + + Select the Post Processor + İşlem Sonucu Seçme @@ -1053,9 +1164,9 @@ Bu proje için NC çıktı dosyası - - Select the Post Processor - İşlem Sonucu Seçme + + Arguments for the Post Processor (specific to the script) + Post İşlemci İçin Argümanlar (komuta özgü) @@ -1063,9 +1174,9 @@ Bu iş için ayarları tutan SetupSheet - - An optional description for this job - Bu iş için isteğe bağlı bir açıklama + + For computing Paths; smaller increases accuracy, but slows down computation + Hesaplama yolları için; daha küçük değerler doğruluğu artırır, ancak hesaplamayı yavaşlatır @@ -1108,14 +1219,9 @@ Desteklenmeyen dosya biçimi - - 2D - 2B - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Taban - / +%.2f /% 2f%.2f /% 2f%.2f /% 2f + + Jobs + İşler @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Malzemenin en büyük Z değerini tutar + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,8 +1277,8 @@ Bu işlem için temel konumlar - - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth StartDepth için hesaplanan değeri @@ -1181,14 +1292,9 @@ Son Alet Derinliği - Z'deki en düşük değer - - Holds the max Z value of Stock - Malzemenin en büyük Z değerini tutar - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ İşlemin kod üretmesini önlemek için Yanlış yapın - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Bu İşlem için isteğe bağlı bir açıklama + + + + User Assigned Label + Kullanıcı atanan etiket + + + + Incremental Step Down of Tool + Aracı artımlı adım aşağı @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Bir Başlama Noktası belirtirken Doğru yapın - - - The tool controller that will be used to calculate the path - Yolu hesaplamak için kullanılacak takım denetleyicisi - Base Geometry @@ -1242,6 +1353,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Depths Derinlik + + + Make True, if specifying a Start Point + Bir Başlama Noktası belirtirken Doğru yapın + PathPocket @@ -1255,16 +1371,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path 3D Pocket object from a face or faces Bir yüz veya yüzlerden 3D Cep Yol nesnesi oluşturur - - - Vertical faces do not form a loop - ignoring - Dikey yüzler bir döngü oluşturmaz - yoksayar - Pocket does not support shape %s.%s Cep%s şekli desteklemiyor.%S + + + Vertical faces do not form a loop - ignoring + Dikey yüzler bir döngü oluşturmaz - yoksayar + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path Pocket object from a face or faces Yüz veya yüzlerden Path Pocket nesnesi oluşturur - - - Vertical faces do not form a loop - ignoring - Dikey yüzler bir döngü oluşturmaz - yoksayar - - - - Pocket does not support shape %s.%s - Cep%s şekli desteklemiyor.%S - - - - Adaptive clearing and profiling - Uyarlanabilir alan ve profil oluşturma - - - - Pass Extension - Pass uzantısı - - - - The distance the facing operation will extend beyond the boundary shape. - Mesafe karşılıklı işlem sınır şekli uzatacaktır. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Profile based on face or faces Yüzey veya yüzeylere dayalı profil - - - Edge Profile - Kenar profili - - - - Profile based on edges - Profil üzerine dayalı - - - - Face Profile - Yüz Profili - - - - Profile based on face or faces - Yüzey veya yüzeylere dayalı profil - The tool number in use @@ -1607,6 +1663,56 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathToolController - - - Unsupported PathToolController template version %s - Desteklenmeyen PathToolController şablon sürümü% s - Error updating TC: %s TC güncellenirken hata oluştu:% s - - Error updating TC: %s - TC güncellenirken hata oluştu:% s + + Unsupported PathToolController template version %s + Desteklenmeyen PathToolController şablon sürümü% s @@ -1732,6 +1833,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Please select exactly one path object Lütfen tam olarak bir yol nesnesi seçin + + + Creates an array from a selected path + Seçilen bir yol bir dizi oluşturur + + + + Please select exactly one path object + Lütfen tam olarak bir yol nesnesi seçin + Path_Comment @@ -1791,11 +1902,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Lütfen bir yol nesnesi seçin - - - Please select a Path object - Lütfen bir Yol nesnesi seçin - Dress-up @@ -1902,36 +2008,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create Dogbone Dress-up Dogbone Dress-up Düzenle - - - Edit Dogbone Dress-up - Dogbone Dress-up Düzenle - - - - Dogbone Dress-up - Dogbone Dress-up Düzenle - - - - Creates a Dogbone Dress-up object from a selected path - Seçilen bir yol bir Dogbone Dress-up oluşturur - - - - Please select one path object - Lütfen bir yol nesnesi seçin - - - - The selected object is not a path - Seçilen nesne bir yol değil - - - - Create Dogbone Dress-up - Dogbone Dress-up Düzenle - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create Dress-up Giydirme - - - DragKnife Dress-up - DragKnife Giydirme - - - - Modifies a path to add dragknife corner actions - Dragknife köşe eylemleri eklemek için bir yolu değiştirir - - - - Please select one path object - Lütfen bir yol nesnesi seçin - - - - The selected object is not a path - Seçilen nesne bir yol değil - - - - Please select a Path object - Lütfen bir Yol nesnesi seçin - - - - Create Dress-up - Giydirme - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Yörünge Yaklaşım Biçimi - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Angle of ramp. Rampa açısı. + + + RampEntry Dress-up + Rampa Girişleri Giydirme + + + + Creates a Ramp Entry Dress-up object from a selected path + Seçilen bir yol bir Dogbone Dress-up oluşturur + + + + The base path to modify + Değiştirilecek taban yolu + + + + Angle of ramp. + Rampa açısı. + + + + RampEntry Dress-up + Rampa Girişleri Giydirme + + + + Creates a Ramp Entry Dress-up object from a selected path + Seçilen bir yol bir Dogbone Dress-up oluşturur + Path_DressupTag - - - Tag Dress-up - Tag Giydirme - - - - Creates a Tag Dress-up object from a selected path - Seçilen bir yol bir Dogbone Dress-up oluşturur - The base path to modify @@ -2089,6 +2150,51 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Radius of the fillet for the tag. Etiketi için köşe yarıçapı. + + + The base path to modify + Değiştirilecek taban yolu + + + + Width of tags. + Etiket genişliği. + + + + Tag Dress-up + Tag Giydirme + + + + Creates a Tag Dress-up object from a selected path + Seçilen bir yol bir Dogbone Dress-up oluşturur + + + + Radius of the fillet for the tag. + Etiketi için köşe yarıçapı. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path Hop object Bir nokta nesnesi oluşturur - - - Please select one path object - - Lütfen bir yol nesnesi seçin - - The selected object is not a path @@ -2139,21 +2238,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Seçilen nesne bir yol değil - - - Create Hop - Kopya oluştur - - - - Creates a Path Hop object - Bir nokta nesnesi oluşturur - Please select one path object Lütfen bir yol nesnesi seçin + + + Create Hop + Kopya oluştur + Path_Inspect @@ -2177,6 +2271,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Please select exactly one path object Lütfen tam olarak bir yol nesnesi seçin + + + Inspect G-code + G-code incelemek + + + + Inspects the G-code contents of a path + Bir yolu G-code içeriğini inceler + Path_Job @@ -2246,6 +2350,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create a Selection Plane object Seçim Düzlemi nesnesi oluşturma + + + Create a Selection Plane object + Seçim Düzlemi nesnesi oluşturma + Path_Post @@ -2310,11 +2419,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. Bir Araç Denetleyicisi bulunamadı. Varsayılan değerlerin kullanılması riskli olabilir. Lütfen bir Araç Denetleyicisi ekleyin. - - - No issues detected, {} has passed basic sanity check. - Herhangi bir sorun tespit edilmedi, {} aklı uygunluğunu kontrol etti. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Complete loop selection from two edges İki kenardan komple loop seçimi - - - Finish Selecting Loop - Döngüyü Seçmeyi Sonlandır - - - - Complete loop selection from two edges - İki kenardan komple loop seçimi - Path_SetupSheet @@ -2353,11 +2447,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Edit SetupSheet ÇizimPlanını Düzenle - - - Edit SetupSheet - ÇizimPlanını Düzenle - Path_SimpleCopy @@ -2378,21 +2467,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a non-parametric copy of another path Başka bir yolun parametrik olmayan bir kopyasını oluşturur - - - Simple Copy - Basit Kopyalama - - - - Creates a non-parametric copy of another path - Başka bir yolun parametrik olmayan bir kopyasını oluşturur - - - - Please select exactly one path object - Lütfen tam olarak bir yol nesnesi seçin - Path_Simulator @@ -2406,16 +2480,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Simulate Path G-Code on stock Simülasyon Yolu G-Kodu stokta - - - CAM Simulator - CAM Simülatörü - - - - Simulate Path G-Code on stock - Simülasyon Yolu G-Kodu stokta - Path_Stop @@ -2448,7 +2512,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Bu işlem, OpenCamLib'in kurulmasını gerektiriyor. - + This operation requires OpenCamLib to be installed. Bu işlem, OpenCamLib'in kurulmasını gerektiriyor. @@ -2494,12 +2558,12 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se İş için Araç Kontrol Cihazı Ekle - + Add Tool Controller to the Job İş için Araç Kontrol Cihazı Ekle - + Add Tool Controller Araç Kumandasını Ekle @@ -2568,15 +2632,10 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se LinuxCNC araç tablosu (*.tbl) - + Open tooltable Araç masasını açın - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Araç Tabanlı XML (*.xml);; HeeksCAD araç tablosu (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Araç Tabanlı XML (*.xml);; HeeksCAD araç tablosu (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Araç Tabanlı XML (*.xml);; LinuxCNC araç tablosu (*.tbl) - - PathCustom - - - The gcode to be inserted - Eklenecek gcode - - - - The tool controller that will be used to calculate the path - Yolu hesaplamak için kullanılacak takım denetleyicisi - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm index 4528671206..f5f229187d 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 3d8cd9e61b..8b4dc90335 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Діаметри отворів + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Орієнтація площини з траєкторією ЧПК - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Профіль круглих отворів - - Orientation plane of CNC path - Орієнтація площини з траєкторією ЧПК + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Профіль круглих отворів - - Profile holes as well as the outline - Профіль отворів, а також контур + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ Pattern method - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Напрямок обертання шпинделя - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - Feed rate for horizontal moves - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Правка + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Правка + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Висоти + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Траєкторія - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Project Setup - - - - Path Modification - Модифікація траєкторії - - - - Helpful Tools - Допоміжні інструменти - - - - &Path - &Траєкторія - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Правка - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Адаптивний + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + The tool controller that will be used to calculate the path + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Згладити @@ -851,8 +975,8 @@ - Drilling - Свердління + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + Оберіть пост процесор + + + + Arguments for the Post Processor (specific to the script) + Аргументи постпроцесора (спеціальні для скрипту) + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + Оберіть пост процесор @@ -1053,9 +1164,9 @@ The NC output file for this project - - Select the Post Processor - Оберіть пост процесор + + Arguments for the Post Processor (specific to the script) + Аргументи постпроцесора (спеціальні для скрипту) @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Creates a non-parametric copy of another path - - - Simple Copy - Simple Copy - - - - Creates a non-parametric copy of another path - Creates a non-parametric copy of another path - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm мм + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm index 8a4116e173..689cb67ea9 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index a8bd82f05e..e9b05aa565 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -26,37 +26,37 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + Planar: pla, escaneig de la superfície 3D. Rotacional: escaneig rotacional del 4t eix. The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass + Mode de compleció per a l'operació: únic o múltiples passos The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) Clearing pattern to use - Clearing pattern to use + Patró de neteja que s'utilitza The model will be rotated around this axis. - The model will be rotated around this axis. + El model girarà al voltant d'aquest eix. Start index(angle) for rotational scan - Start index(angle) for rotational scan + Inicia l'índex(angle) per a l'escàner rotacional Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + Para l'índex(angle) per a l'escàner rotacional @@ -81,17 +81,17 @@ Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. + Ignora les àrees que passen per davall d'una profunditat especificada. Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. + Profunditat utilitzada per a identificar àmplies àrees a ignorar. Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. + Retalla els residus fins al fons en la vora del model, alliberant-lo. @@ -151,7 +151,7 @@ Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Utilitza la compensació del radi de l'eina de tall de la màquina/Tool Path Offset G41/G42 @@ -186,7 +186,7 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Si la modificació ha d'ignorar les ordres del moviment per damunt de DressupStartDepth (Profunditat inicial de la trajectòria addicional) @@ -203,40 +203,60 @@ Enable pecking Habilita les passades - - - Height to clear top of material - Alçària per a netejar la part superior del material - - - - Diameters of the holes - Diàmetres dels forats - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Incremental Drill depth before retracting to clear chips - Profunditat de perforació incremental abans de retirar-se per a netejar la borumballa - Enable pecking Habilita les passades - + + Enable dwell + Habilita l'espera + + + + Calculate the tip length and subtract from final depth + Calcula la longitud de la punta i resta-la de la profunditat final + + + + Calculate the tip length and subtract from final depth + Calcula la longitud de la punta i resta-la de la profunditat final + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + L'alçària a què s'inicia l'avanç i l'alçària durant la retirada de l'eina quan el camí està finalitzat + + + + Shape to use for calculating Boundary + Forma que s'utilitza per al càlcul del límit + + + Orientation plane of CNC path Pla d'orientació del camí CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Forma que s'utilitza per al càlcul del límit + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,24 +274,24 @@ Perfila els forats redons - - Orientation plane of CNC path - Pla d'orientació del camí CNC + + The base object this collision refers to + L'objecte base a què es refereix aquesta interferència - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Perfila els forats redons - - Profile holes as well as the outline - Perfila els forats a més del contorn + + The base object this collision refers to + L'objecte base a què es refereix aquesta interferència Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation + Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall @@ -309,14 +329,14 @@ Angle del patró en zig-zag - - Maximum distance before a miter join is truncated - Distància màxima abans que es trunque la unió en biaix + + Percent of cutter diameter to step over on each pass + Avanç en percentatge del diàmetre de l'eina de tall en cada passada - - Extra offset to apply to the operation. Direction is operation dependent. - Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + Angle of the zigzag pattern + Angle del patró en zig-zag @@ -329,9 +349,9 @@ Mètode del patró - - Angle of the zigzag pattern - Angle del patró en zig-zag + + Add Optional or Mandatory Stop to the program + Afig al programa una parada opcional o obligatòria @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Velocitat d'avanç ràpid per als desplaçaments horitzontals - - - Direction of spindle rotation - Direcció de rotació d'eix - - - - Feed rate for vertical moves in Z - Velocitat d'avanç per als desplaçaments verticals en Z - - - - Feed rate for horizontal moves - Velocitat d'avanç dels moviments horitzontals - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Edita + + + + %s is not a Base Model object of the job %s + %s no és un objecte de Model base del treball %s + + + + Base shape %s already in the list + La forma base %s ja està a la llista + + + + Ignoring vertex + S'ignoren els vèrtexs + + + + Edit + Edita + + + + %s is not a Base Model object of the job %s + %s no és un objecte de Model base del treball %s + Didn't find job %s @@ -587,19 +622,14 @@ La tasca pare %s no té un objecte de base - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° @@ -621,6 +651,109 @@ Pick Start Point Trieu el punt d'inici + + + Heights + Alçàries + + + + AreaOp Operation + Operació AreaOp + + + + Uncreate AreaOp Operation + Elimina l'operació AreaOp + + + + Pick Start Point + Trieu el punt d'inici + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -634,7 +767,7 @@ Engraving Operations - Engraving Operations + Operacions de gravat @@ -671,51 +804,6 @@ &Path &Camí - - - Path Dressup - Aspecte del camí - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Configuració del projecte - - - - Path Modification - Modificacion de camí - - - - Helpful Tools - Eines útils - - - - &Path - &Camí - - - - Path Dressup - Aspecte del camí - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Edita - this object already in the list @@ -749,6 +837,14 @@ Crea un perfil basat en una selecció de vores + + PathAdaptive + + + Adaptive + Adaptable + + PathAreaOp @@ -762,17 +858,45 @@ no s'ha trobat cap tasca per a op %s. - + job %s has no Base. la tasca %s no té base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + El gcode que s'ha d'inserir + + + + The tool controller that will be used to calculate the path + El controlador d'eina que s'utilitza per a calcular el camí + + + + The gcode to be inserted + El gcode que s'ha d'inserir + + + + PathDeburr + + + The desired width of the chamfer + L'amplària desitjada del xamfrà + + + + The additional depth of the tool path + La profunditat addicional del camí de l'eina + + + + Deburr + Desbarba @@ -849,8 +973,8 @@ - Drilling - Perforació + Creates a Path Drilling object from a features of a base object + Crea un objecte de perforació de camí a partir de característiques d'un objecte base @@ -868,25 +992,12 @@ Additional base objects to be engraved - Additional base objects to be engraved - - - - PathDeburr - - - Deburr - Deburr + Objectes de base addicionals per a gravar - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Grava @@ -959,7 +1070,7 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + La direcció dels talls circulars, en sentit horari (CW) o antihorari (CCW) @@ -971,26 +1082,11 @@ Start cutting from the inside or outside Inicia el tall des de l'interior o l'exterior - - - Creates a Path Helix object from a features of a base object - Crea un objecte de camí helicoïdal a partir de característiques d'un objecte base - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Inicia el tall des de l'interior o l'exterior - - - Radius increment (must be smaller than tool diameter) - Increment del radi (ha de ser menor que el diàmetre de l'eina) - PathJob @@ -1020,9 +1116,24 @@ Incompatible el tipus d'estoc %s (%d) - - Stock not from Base bound box! - Estoc no des de la caixa contenidora base! + + Select the Post Processor + Selecciona el postprocessador + + + + Arguments for the Post Processor (specific to the script) + Arguments del postprocessador (específic a l'script) + + + + Stock not a box! + L'estoc no és una caixa! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Per al càlcul dels camins; més menut augmenta la precisió, però fa més lent el càlcul @@ -1040,9 +1151,9 @@ Col·lecció de controladors d'eina disponibles per a aquest treball. - - Unsupported stock type %s (%d) - Incompatible el tipus d'estoc %s (%d) + + Select the Post Processor + Selecciona el postprocessador @@ -1050,9 +1161,9 @@ El fitxer d'eixida NC per a aquest projecte - - Select the Post Processor - Selecciona el postprocessador + + Arguments for the Post Processor (specific to the script) + Arguments del postprocessador (específic a l'script) @@ -1060,9 +1171,9 @@ SetupSheet manté la configuració d'aquest treball - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + Per al càlcul dels camins; més menut augmenta la precisió, però fa més lent el càlcul @@ -1105,14 +1216,9 @@ Tipus d'estoc incompatible - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Treballs @@ -1140,7 +1246,12 @@ Holds the max Z value of Stock - Holds the max Z value of Stock + Manté el valor màxim Z de l'estoc + + + + Holds the min Z value of Stock + Manté el valor mínim Z de l'estoc @@ -1163,9 +1274,9 @@ Posició de base per a aquesta operació - - Holds the calculated value for the StartDepth - Pressiona el valor calculat per a la StartDepth + + Holds the calculated value for the FinalDepth + Pressiona el valor calculat per a la FinalDepth @@ -1178,14 +1289,9 @@ Profunditat final de l'eina: valor més baix en Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Profunditat inicial d'ús intern, únicament per als valors derivats @@ -1193,9 +1299,19 @@ Marqueu «fals», per a evitar l'operació de generació de codi - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Un comentari opcional per a aquesta operació + + + + User Assigned Label + Etiqueta assignada a l'usuari + + + + Incremental Step Down of Tool + Pas incremental cap avall de l'eina @@ -1212,11 +1328,6 @@ Make True, if specifying a Start Point Marqueu «cert», si s'especifica un punt final - - - The tool controller that will be used to calculate the path - El controlador d'eina que s'utilitza per a calcular el camí - Base Geometry @@ -1231,14 +1342,19 @@ FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. + Aquesta operació no pot modificar la profunditat final. +Si és necessari establir la profunditat final de forma manual, seleccioneu una operació diferent. Depths Profunditats + + + Make True, if specifying a Start Point + Marqueu «cert», si s'especifica un punt final + PathPocket @@ -1252,16 +1368,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Crea un objecte Trajectòria de buidat 3D des d'una cara o cares - - - Vertical faces do not form a loop - ignoring - Las cares verticals no formen un bucle - ignora - Pocket does not support shape %s.%s El buidatge no admet la forma %s.%s + + + Vertical faces do not form a loop - ignoring + Las cares verticals no formen un bucle - ignora + Adaptive clearing and profiling @@ -1302,31 +1418,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Crea un objecte de Trajectòria de buidatge des d'una o vàries cares - - - Vertical faces do not form a loop - ignoring - Las cares verticals no formen un bucle - ignora - - - - Pocket does not support shape %s.%s - El buidatge no admet la forma %s.%s - - - - Adaptive clearing and profiling - Perfil i neteja adaptatius - - - - Pass Extension - Extensió de la passada - - - - The distance the facing operation will extend beyond the boundary shape. - La distància de l'operació de generació de cares s'estendrà més enllà de la forma límit. - Generating toolpath with libarea offsets. @@ -1341,40 +1432,25 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. - Uses the outline of the base geometry. + Utilitza el contorn de la geometria de base. Default length of extensions. - Default length of extensions. + Llargària per defecte de les extensions. List of features to extend. - List of features to extend. + Llista de les propietats per a estendre. When enabled connected extension edges are combined to wires. - When enabled connected extension edges are combined to wires. - - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. + Si està habilitat, les arestes de les extensions connectades es combinen amb els filferros. @@ -1397,27 +1473,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces - Profile based on face or faces - - - - Edge Profile - Perfil de vora - - - - Profile based on edges - Perfil basat en vores - - - - Face Profile - Perfil de cara - - - - Profile based on face or faces - Profile based on face or faces + Perfil basat en una o més cares @@ -1591,12 +1647,62 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for horizontal rapid moves. - Default speed for horizontal rapid moves. + Velocitat per defecte per a moviments horitzontals ràpids. Default speed for vertical rapid moves. - Default speed for vertical rapid moves. + Velocitat per defecte per a moviments verticals ràpids. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + La utilització d'aquest camp depén de SafeHeightExpression (Expressió d'alçària segura) - Per defecte el seu valor s'afegeix a StartDepth (Profunditat inicial) i utilitzat com StartDepth (Profunditat inicial) d'una operació. + + + + Expression set for the SafeHeight of new operations. + Conjunt d'expressions per a l'alçària segura d'una operació nova. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + La utilització d'aquest camp depén de la ClearanceHeightExpression (Expressió d'alçària de marge de seguretat) - per defecte el seu valor s'afegeix a la StartDepth (Profunditat inicial) i utilitzat per a la ClearanceHeigh (Alçària de marge de seguretat) d'una operació. + + + + Expression set for the ClearanceHeight of new operations. + Conjunt d'expressions per a l'alçària del marge de seguretat d'una operació nova. + + + + Default speed for horizontal rapid moves. + Velocitat per defecte per a moviments horitzontals ràpids. + + + + Default speed for vertical rapid moves. + Velocitat per defecte per a moviments verticals ràpids. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + La utilització d'aquest camp depén de SafeHeightExpression (Expressió d'alçària segura) - Per defecte el seu valor s'afegeix a StartDepth (Profunditat inicial) i utilitzat com StartDepth (Profunditat inicial) d'una operació. + + + + Expression set for the SafeHeight of new operations. + Conjunt d'expressions per a l'alçària segura d'una operació nova. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + La utilització d'aquest camp depén de la ClearanceHeightExpression (Expressió d'alçària de marge de seguretat) - per defecte el seu valor s'afegeix a la StartDepth (Profunditat inicial) i utilitzat per a la ClearanceHeigh (Alçària de marge de seguretat) d'una operació. + + + + Expression set for the ClearanceHeight of new operations. + Conjunt d'expressions per a l'alçària del marge de seguretat d'una operació nova. @@ -1604,12 +1710,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Length of this stock box - Length of this stock box + Llargària d'aquesta caixa d'estoc Width of this stock box - Width of this stock box + Amplària d'aquesta caixa d'estoc @@ -1674,20 +1780,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Incompatible la plantilla PathJob versió %s - Error updating TC: %s Error d'actualització TC: %s - - Error updating TC: %s - Error d'actualització TC: %s + + Unsupported PathToolController template version %s + Incompatible la plantilla PathJob versió %s @@ -1723,6 +1824,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Seleccioneu exactament un objecte de tipus camí + + + Creates an array from a selected path + Crea una matriu a partir del camí seleccionat + + + + Please select exactly one path object + Seleccioneu exactament un objecte de tipus camí + Path_Comment @@ -1781,11 +1892,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Seleccioneu un objecte de tipus camí - - - Please select a Path object - Seleccioneu un objecte camí - Dress-up @@ -1892,36 +1998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Crea un aspecte d'os de gos - - - Edit Dogbone Dress-up - Edita l'aspecte d'os de gos - - - - Dogbone Dress-up - Aspecte d'os de gos - - - - Creates a Dogbone Dress-up object from a selected path - Crea un objecte de tipus aspecte d'os de gos a partir d'un camí seleccionat - - - - Please select one path object - Seleccioneu un objecte de tipus camí - - - - The selected object is not a path - L'objecte seleccionat no és un camí - - - - Create Dogbone Dress-up - Crea un aspecte d'os de gos - Path_DressupDragKnife @@ -1955,36 +2031,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Crea un aspecte - - - DragKnife Dress-up - Aspecte de ganivet arrossegat - - - - Modifies a path to add dragknife corner actions - Modifica un camí per a afegir accions de ganivet arrossegat en les cantonades - - - - Please select one path object - Seleccioneu un objecte de tipus camí - - - - The selected object is not a path - L'objecte seleccionat no és un camí - - - - Please select a Path object - Seleccioneu un objecte camí - - - - Create Dress-up - Crea un aspecte - Path_DressupLeadInOut @@ -1996,37 +2042,32 @@ If it is necessary to set the FinalDepth manually please select a different oper The Style of LeadOut the Path - The Style of LeadOut the Path + L'estil de la trajectòria per a eixir del camí The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - - - - The Style of LeadIn the Path - L'estil de la trajectòria del camí - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Mode de punt desfasament de radi o Centre LeadInOut Dressup - LeadInOut Dressup + Modificacions de LeadInOut (condueix dins/fora) Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crea una compensació de radi d'eina de tall tall G41/G42. Introdueix un objecte modificat des d'un camí seleccionat + + + + LeadInOut Dressup + Modificacions de LeadInOut (condueix dins/fora) + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Crea una compensació de radi d'eina de tall tall G41/G42. Introdueix un objecte modificat des d'un camí seleccionat @@ -2041,19 +2082,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle de la rampa. + + + RampEntry Dress-up + Aspecte d'EntradaRampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un objecte de tipus aspecte d'EntradaRampa a partir d'un camí seleccionat + + + + The base path to modify + El camí de base que es modifica + + + + Angle of ramp. + Angle de la rampa. + + + + RampEntry Dress-up + Aspecte d'EntradaRampa + + + + Creates a Ramp Entry Dress-up object from a selected path + Crea un objecte de tipus aspecte d'EntradaRampa a partir d'un camí seleccionat + Path_DressupTag - - - Tag Dress-up - Aspecte d'etiqueta - - - - Creates a Tag Dress-up object from a selected path - Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat - The base path to modify @@ -2079,6 +2140,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radi d'arredoniment per a l'etiqueta + + + The base path to modify + El camí de base que es modifica + + + + Width of tags. + Amplària de les etiquetes + + + + Tag Dress-up + Aspecte d'etiqueta + + + + Creates a Tag Dress-up object from a selected path + Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat + + + + Radius of the fillet for the tag. + Radi d'arredoniment per a l'etiqueta + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2115,33 +2221,22 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objecte de tipus salt en el camí - - - Please select one path object - - Seleccioneu un objecte de tipus camí - The selected object is not a path L'objecte seleccionat no és un camí - - - Create Hop - Crea un salt - - - - Creates a Path Hop object - Crea un objecte de tipus salt en el camí - Please select one path object Seleccioneu un objecte de tipus camí + + + Create Hop + Crea un salt + Path_Inspect @@ -2165,6 +2260,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Seleccioneu exactament un objecte de tipus camí + + + Inspect G-code + Inspecciona G-code + + + + Inspects the G-code contents of a path + Inspecciona el G-code d'un camí + Path_Job @@ -2211,7 +2316,7 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - All Files (*.*) + Tots els fitxers (*.*) @@ -2234,6 +2339,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Crea un objecte selecció de pla + + + Create a Selection Plane object + Crea un objecte selecció de pla + Path_Post @@ -2296,12 +2406,7 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - - No issues detected, {} has passed basic sanity check. - No s'han detectat problemes, {} ha passat la verificació bàsica de validesa. + No s'ha trobat cap controlador d'eina. S'utilitzaran els valors per defecte, la qual cosa és perillosa. Afegiu un controlador d'eina. @@ -2322,16 +2427,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Completa la selecció del bucle a partir de dues vores - - - Finish Selecting Loop - Finalitza la selecció del bucle - - - - Complete loop selection from two edges - Completa la selecció del bucle a partir de dues vores - Path_SetupSheet @@ -2340,11 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edita SetupSheet - - - Edit SetupSheet - Edita SetupSheet - Path_SimpleCopy @@ -2364,21 +2454,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Crea una còpia no paramètrica d'un altre camí - - - Simple Copy - Còpia simple - - - - Creates a non-parametric copy of another path - Crea una còpia no paramètrica d'un altre camí - - - - Please select exactly one path object - Seleccioneu exactament un objecte de tipus camí - Path_Simulator @@ -2392,16 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simular la Trajectòria G-Code en estoc - - - CAM Simulator - Simulador CAM - - - - Simulate Path G-Code on stock - Simular la Trajectòria G-Code en estoc - Path_Stop @@ -2434,7 +2499,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Aquesta operació requereix que s'instal·le OpenCamLib. - + This operation requires OpenCamLib to be installed. Aquesta operació requereix que s'instal·le OpenCamLib. @@ -2476,12 +2541,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Afig un controlador d'eina a la tasca - + Add Tool Controller to the Job Afig un controlador d'eina a la tasca - + Add Tool Controller Afig un controlador d'eina @@ -2550,15 +2615,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Taula d'eines LinuxCNC (*.tbl) - + Open tooltable Obri la taula d'eines - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - Save tooltable @@ -2717,7 +2777,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Undefined - Undefined + Sense definir @@ -2799,6 +2859,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) + Object not found @@ -2815,19 +2880,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Taula d'eines XML (*.xml);;Taula d'eines LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - El gcode que s'ha d'inserir - - - - The tool controller that will be used to calculate the path - El controlador d'eina que s'utilitza per a calcular el camí - - PathDressup_Dogbone @@ -3181,7 +3233,7 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - All Files (*.*) + Tots els fitxers (*.*) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm index 8565c2f07c..8b03e73676 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts index 6a8fa251b4..3a435374d4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts @@ -204,14 +204,14 @@ Bật chế độ đục khoét - - Height to clear top of material - Height to clear top of material + + Enable pecking + Bật chế độ đục khoét - - Diameters of the holes - Đường kính các lỗ + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Độ sâu khoan gia tăng trước khi rút lại để làm sạch chỗ sứt mẻ + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Bật chế độ đục khoét + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + Chiều cao nơi nguồn cấp dữ liệu bắt đầu và chiều cao trong công cụ rút lại khi đường dẫn hoàn tất + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Mặt phẳng định hướng của đường CNC - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Làm nghiêng xung quanh các lỗ - - Orientation plane of CNC path - Mặt phẳng định hướng của đường CNC + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Làm nghiêng xung quanh các lỗ - - Profile holes as well as the outline - Làm nghiêng các lỗ cũng như bề mặt + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Góc của mẫu zigzag - - Maximum distance before a miter join is truncated - Khoảng cách tối đa trước khi khớp nối bị cắt ngắn + + Percent of cutter diameter to step over on each pass + Phần trăm đường kính dao cắt từng bước trên mỗi đường chuyền - - Extra offset to apply to the operation. Direction is operation dependent. - Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc. + + Angle of the zigzag pattern + Góc của mẫu zigzag @@ -329,9 +349,9 @@ Phương thức mẫu - - Angle of the zigzag pattern - Góc của mẫu zigzag + + Add Optional or Mandatory Stop to the program + Thêm Dừng tùy chọn hoặc bắt buộc vào chương trình @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Tốc độ di chuyển nhanh nằm ngang - - - Direction of spindle rotation - Hướng quay của trục chính - - - - Feed rate for vertical moves in Z - Tốc độ nạp liệu cho di chuyển thẳng đứng theo trục z - - - - Feed rate for horizontal moves - Tốc độ cấp liệu cho các di chuyển ngang - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + Chỉnh sửa + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + Chỉnh sửa + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Công việc chính %s không có đối tượng cơ sở - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Góc cắt cạnh (%.2f) dẫn đến độ dài đầu công cụ âm - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Chọn điểm đầu + + + Heights + Chiều cao + + + + AreaOp Operation + Hoạt động AreaOp + + + + Uncreate AreaOp Operation + Hủy tạo Hoạt động AreaOp + + + + Pick Start Point + Chọn điểm đầu + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Đường dẫn - - - Path Dressup - Thiết kế áo đường - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - Thiết lập dự án - - - - Path Modification - Sửa đổi đường dẫn - - - - Helpful Tools - Công cụ hữu ích - - - - &Path - &Đường dẫn - - - - Path Dressup - Thiết kế áo đường - - - - Supplemental Commands - Supplemental Commands - - - - Edit - Chỉnh sửa - this object already in the list @@ -751,6 +839,14 @@ Tạo một Cấu hình dựa trên việc lựa chọn cạnh + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ không tìm được công việc nào cho hoạt động %s. - + job %s has no Base. công việc %s không có thành phần Cơ sở. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + Mã gcode được chèn vào + + + + The tool controller that will be used to calculate the path + Bộ điều khiển công cụ sẽ được sử dụng để tính toán đường dẫn + + + + The gcode to be inserted + Mã gcode được chèn vào + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - Khoan + Creates a Path Drilling object from a features of a base object + Tạo đối tượng Khoan đường dẫn từ bộ phận của một đối tượng cơ sở @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Khắc @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Bắt đầu cắt từ bên trong hoặc bên ngoài - - - Creates a Path Helix object from a features of a base object - Tạo đối tượng Đường xoắn ốc từ thành phần của một đối tượng cơ sở - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Bắt đầu cắt từ bên trong hoặc bên ngoài - - - Radius increment (must be smaller than tool diameter) - Tăng bán kính (phải nhỏ hơn đường kính công cụ) - PathJob @@ -1023,9 +1119,24 @@ Loại hàng dự trữ không được hỗ trợ %s (%d) - - Stock not from Base bound box! - Hàng dự trữ không phải từ trong hộp! + + Select the Post Processor + Chọn Đường chạy dao + + + + Arguments for the Post Processor (specific to the script) + Tham số của đường chạy dao (tập lệnh cụ thể) + + + + Stock not a box! + Hàng dự trữ không phải là một hộp! + + + + For computing Paths; smaller increases accuracy, but slows down computation + Đối với đường dẫn tính toán; nhỏ hơn để tăng độ chính xác, nhưng lại làm chậm quá trình tính toán @@ -1043,9 +1154,9 @@ Các bộ điều khiển công cụ được tổng hợp sẵn cho công việc này. - - Unsupported stock type %s (%d) - Loại hàng dự trữ không được hỗ trợ %s (%d) + + Select the Post Processor + Chọn Đường chạy dao @@ -1053,9 +1164,9 @@ Tệp đầu ra NC cho dự án này - - Select the Post Processor - Chọn Đường chạy dao + + Arguments for the Post Processor (specific to the script) + Tham số của đường chạy dao (tập lệnh cụ thể) @@ -1063,9 +1174,9 @@ SetupSheet giữ các cài đặt cho công việc này - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + Đối với đường dẫn tính toán; nhỏ hơn để tăng độ chính xác, nhưng lại làm chậm quá trình tính toán @@ -1108,14 +1219,9 @@ Loai hàng dự trữ không được hỗ trợ - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Cơ sở -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Vị trí cơ sở cho hoạt động này - - Holds the calculated value for the StartDepth - Cố định giá trị được tính cho Độ sâu đầu tiên + + Holds the calculated value for the FinalDepth + Cố định giá trị được tính cho Độ sâu cuối cùng @@ -1181,14 +1292,9 @@ Độ sâu cuối cùng của công cụ - giá trị thấp nhất theo trục z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Làm Sai, để ngăn chặn hoạt động tạo mã - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + Một chú thích tùy chọn cho hoạt động này + + + + User Assigned Label + Nhãn được gán cho người dùng + + + + Incremental Step Down of Tool + Công cụ gia tăng bước xuống @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Thực hiện đúng, nếu chỉ định điểm đầu - - - The tool controller that will be used to calculate the path - Bộ điều khiển công cụ sẽ được sử dụng để tính toán đường dẫn - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Độ sâu + + + Make True, if specifying a Start Point + Thực hiện đúng, nếu chỉ định điểm đầu + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Tạo một đối tượng Đường dẫn túi 3D từ một hoặc nhiều mặt - - - Vertical faces do not form a loop - ignoring - Các mặt thẳng đứng không tạo thành vòng lặp - bỏ qua - Pocket does not support shape %s.%s Pocket không hỗ trợ hình dạng %s.%s + + + Vertical faces do not form a loop - ignoring + Các mặt thẳng đứng không tạo thành vòng lặp - bỏ qua + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt - - - Vertical faces do not form a loop - ignoring - Các mặt thẳng đứng không tạo thành vòng lặp - bỏ qua - - - - Pocket does not support shape %s.%s - Pocket không hỗ trợ hình dạng %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Đường dẫn mở rộng - - - - The distance the facing operation will extend beyond the boundary shape. - Khoảng cách thao tác tạo mặt sẽ vượt ra ngoài hình dạng biên. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Cấu hình cạnh - - - - Profile based on edges - Cấu hình dựa trên các cạnh - - - - Face Profile - Cấu hình mặt - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Phiên bản mẫu PathToolController không được hỗ trợ %s - Error updating TC: %s Lỗi khi cập nhật TC: %s - - Error updating TC: %s - Lỗi khi cập nhật TC: %s + + Unsupported PathToolController template version %s + Phiên bản mẫu PathToolController không được hỗ trợ %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Vui lòng chọn chính xác một đối tượng đường dẫn + + + Creates an array from a selected path + Tạo một mảng từ một đường dẫn đã chọn + + + + Please select exactly one path object + Vui lòng chọn chính xác một đối tượng đường dẫn + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Vui lòng chọn một đối tượng đường dẫn - - - Please select a Path object - Vui lòng chọn đối tượng Đường dẫn - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Tạo kết cấu "Xương chó" - - - Edit Dogbone Dress-up - Chỉnh sửa kết cấu "xương chó" - - - - Dogbone Dress-up - Kết cấu "xương chó" - - - - Creates a Dogbone Dress-up object from a selected path - Tạo một đối tượng Kết cấu "xương chó" từ một đường dẫn đã chọn - - - - Please select one path object - Vui lòng chọn một đối tượng đường dẫn - - - - The selected object is not a path - Đối tượng được chọn không phải là đường dẫn - - - - Create Dogbone Dress-up - Tạo kết cấu "Xương chó" - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Tạo chức năng xây dựng áo đường - - - DragKnife Dress-up - Kết cấu dao phay - - - - Modifies a path to add dragknife corner actions - Sửa đổi đường dẫn để thêm thao tác góc dao phay - - - - Please select one path object - Vui lòng chọn một đối tượng đường dẫn - - - - The selected object is not a path - Đối tượng được chọn không phải là đường dẫn - - - - Please select a Path object - Vui lòng chọn đối tượng Đường dẫn - - - - Create Dress-up - Tạo chức năng xây dựng áo đường - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - Kiểu đường dẫn vào trong - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Góc dốc. + + + RampEntry Dress-up + Kết cấu làn xe vào + + + + Creates a Ramp Entry Dress-up object from a selected path + Tạo một đối tượng kết cấu làn xe vào từ một đường dẫn đã chọn + + + + The base path to modify + Đường cơ sở để sửa đổi + + + + Angle of ramp. + Góc dốc. + + + + RampEntry Dress-up + Kết cấu làn xe vào + + + + Creates a Ramp Entry Dress-up object from a selected path + Tạo một đối tượng kết cấu làn xe vào từ một đường dẫn đã chọn + Path_DressupTag - - - Tag Dress-up - Kết cấu Thẻ - - - - Creates a Tag Dress-up object from a selected path - Tạo một đối tượng kết cấu Thẻ từ một đường dẫn đã chọn - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Bán kính của phần làm tròn cho thẻ. + + + The base path to modify + Đường cơ sở để sửa đổi + + + + Width of tags. + Chiều rộng của thẻ. + + + + Tag Dress-up + Kết cấu Thẻ + + + + Creates a Tag Dress-up object from a selected path + Tạo một đối tượng kết cấu Thẻ từ một đường dẫn đã chọn + + + + Radius of the fillet for the tag. + Bán kính của phần làm tròn cho thẻ. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tạo một đối tượng đường dẫn bước nhảy - - - Please select one path object - - Vui lòng chọn một đối tượng đường dẫn - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Đối tượng được chọn không phải là một đường dẫn - - - Create Hop - Tạo bước nhảy - - - - Creates a Path Hop object - Tạo một đối tượng đường dẫn bước nhảy - Please select one path object Vui lòng chọn một đối tượng đường dẫn + + + Create Hop + Tạo bước nhảy + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Vui lòng chọn chính xác một đối tượng đường dẫn + + + Inspect G-code + Kiểm tra mã G + + + + Inspects the G-code contents of a path + Kiểm tra nội dung mã G của một đường dẫn + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Tạo một đối tượng Mặt phẳng Chọn lựa + + + Create a Selection Plane object + Tạo một đối tượng Mặt phẳng Chọn lựa + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - Không phát hiện thấy vấn đề nào, {} đã đạt yêu cầu khi được kiểm tra độ chính xác cơ bản. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Hoàn thiện quá trình lựa chọn vòng lặp từ hai cạnh - - - Finish Selecting Loop - Kết thúc việc chọn Vòng lặp - - - - Complete loop selection from two edges - Hoàn thiện quá trình lựa chọn vòng lặp từ hai cạnh - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path Tạo một bản sao không tham số của một đường dẫn khác - - - Simple Copy - Sao chép đơn giản - - - - Creates a non-parametric copy of another path - Tạo một bản sao không tham số của một đường dẫn khác - - - - Please select exactly one path object - Vui lòng chọn chính xác một đối tượng đường dẫn - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Mô phỏng đường dẫn G-code trên kho hàng - - - CAM Simulator - Trình mô phỏng CAM - - - - Simulate Path G-Code on stock - Mô phỏng đường dẫn G-code trên kho hàng - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Thao tác này yêu cầu cài đặt OpenCamLib. - + This operation requires OpenCamLib to be installed. Thao tác này yêu cầu cài đặt OpenCamLib. @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Thêm bộ điều khiển công cụ vào công việc - + Add Tool Controller to the Job Thêm bộ điều khiển công cụ vào công việc - + Add Tool Controller Thêm bộ điều khiển công cụ @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper Bảng công cụ LinuxCNC (*.tbl) - + Open tooltable Mở hộp công cụ - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Hộp công cụ XML (*.xml);;Hộp công cụ HeeksCAD (*.tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Hộp công cụ XML (*.xml);;Hộp công cụ HeeksCAD (*.tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Hộp công cụ XML (*.xml);;Hộp công cụ LinuxCNC (*.tbl) - - PathCustom - - - The gcode to be inserted - Mã gcode được chèn vào - - - - The tool controller that will be used to calculate the path - Bộ điều khiển công cụ sẽ được sử dụng để tính toán đường dẫn - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm index 763faae8cb..e6224b0b17 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index d98083b381..40438101cc 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -41,12 +41,12 @@ Clearing pattern to use - Clearing pattern to use + 要使用的清理模式 The model will be rotated around this axis. - The model will be rotated around this axis. + 模型将绕此轴旋转。 @@ -204,14 +204,14 @@ 启用啄钻 - - Height to clear top of material - Height to clear top of material + + Enable pecking + 启用啄钻 - - Diameters of the holes - 孔的直径 + + Enable dwell + 启用驻留 @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - 缩回以清除切屑前的钻孔深度增量 + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - 启用啄钻 + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + 进给开始的高度和当路径完成时撤回工具的高度 + + + + Shape to use for calculating Boundary + 用于计算边界的形状 + + + Orientation plane of CNC path CNC路径方向平面 - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + 用于计算边界的形状 + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,24 +274,24 @@ 轮廓铣圆孔 - - Orientation plane of CNC path - CNC路径方向平面 + + The base object this collision refers to + 引起此冲突的基础对象 - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + 轮廓铣圆孔 - - Profile holes as well as the outline - 轮廓铣孔及外轮廓 + + The base object this collision refers to + 引起此冲突的基础对象 Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation + 如果使用刀具半径补偿, 则为 True @@ -309,14 +329,14 @@ 之字形刀轨的角度 - - Maximum distance before a miter join is truncated - 截断斜接之前的最大距离 + + Percent of cutter diameter to step over on each pass + 路径彼此相对于刀具直径重叠率 - - Extra offset to apply to the operation. Direction is operation dependent. - 要应用于操作的额外偏移量。方向与操作相关。 + + Angle of the zigzag pattern + 之字形刀轨的角度 @@ -329,9 +349,9 @@ 图案加工 - - Angle of the zigzag pattern - 之字形刀轨的角度 + + Add Optional or Mandatory Stop to the program + 向程序添加可选或强制停止 @@ -373,21 +393,6 @@ Rapid rate for horizontal moves 水平移动的速率 - - - Direction of spindle rotation - 主轴旋转方向 - - - - Feed rate for vertical moves in Z - Z向垂直移动的进给速率 - - - - Feed rate for horizontal moves - 水平移动的进给速度 - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + 编辑 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + 编辑 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ 父作业没有基对象 - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + 切削角导致工具的提示长度为负值 - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° @@ -621,6 +651,109 @@ Pick Start Point 选取起点 + + + Heights + 高度 + + + + AreaOp Operation + AreaOp 操作 + + + + Uncreate AreaOp Operation + 不创造 AreaOp 操作 + + + + Pick Start Point + 选取起点 + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &路径 - - - Path Dressup - 修整路径 - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - 项目创建 - - - - Path Modification - 路径修改 - - - - Helpful Tools - 有用的工具 - - - - &Path - &路径 - - - - Path Dressup - 修整路径 - - - - Supplemental Commands - Supplemental Commands - - - - Edit - 编辑 - this object already in the list @@ -751,6 +839,14 @@ 基于边缘选择创建轮廓铣 + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ 找不到 op %s 的作业。 - + job %s has no Base. 作业%s 没有基础。 - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + 要插入的G代码 + + + + The tool controller that will be used to calculate the path + 用于计算刀轨的刀具控制器 + + + + The gcode to be inserted + 要插入的G代码 + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - 钻孔 + Creates a Path Drilling object from a features of a base object + 从基对象的特征创建路径钻孔对象 @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + 刻 @@ -974,26 +1085,11 @@ Start cutting from the inside or outside 从内部或外部开始切割 - - - Creates a Path Helix object from a features of a base object - 从基对象的特征创建路径螺旋线对象 - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside 从内部或外部开始切割 - - - Radius increment (must be smaller than tool diameter) - 半径增量 (必须小于工具直径) - PathJob @@ -1023,9 +1119,24 @@ 不支持的工件类型 %s (%d) - - Stock not from Base bound box! - 工件不是来自于基础物件外框! + + Select the Post Processor + 选择后处理器 + + + + Arguments for the Post Processor (specific to the script) + 后处理器 (特定于脚本) 的参数 + + + + Stock not a box! + 工件不是一个长方体! + + + + For computing Paths; smaller increases accuracy, but slows down computation + 用于计算路径; 越小精度越高, 但计算速度越慢 @@ -1043,9 +1154,9 @@ 可用于此作业的工具控制器的集合。 - - Unsupported stock type %s (%d) - 不支持的工件类型 %s (%d) + + Select the Post Processor + 选择后处理器 @@ -1053,9 +1164,9 @@ 此项目的 NC 输出文件 - - Select the Post Processor - 选择后处理器 + + Arguments for the Post Processor (specific to the script) + 后处理器 (特定于脚本) 的参数 @@ -1063,9 +1174,9 @@ 保存此作业设置的设置表 - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + 用于计算路径; 越小精度越高, 但计算速度越慢 @@ -1108,14 +1219,9 @@ 不支持的工件类型 - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - 基/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ 此操作的基本位置 - - Holds the calculated value for the StartDepth - 保存起始深度的计算值 + + Holds the calculated value for the FinalDepth + 保存终止深度的计算值 @@ -1181,14 +1292,9 @@ 刀具的最终深度-Z向最低值 - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ 使假，以防止生成代码操作 - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + 此操作的可选注释 + + + + User Assigned Label + 用户指定的标签 + + + + Incremental Step Down of Tool + 逐步降低工具 @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point 如果指定起始点, 则为 True - - - The tool controller that will be used to calculate the path - 用于计算刀轨的刀具控制器 - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths 深度 + + + Make True, if specifying a Start Point + 如果指定起始点, 则为 True + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces 从面或多面创建一个3D口袋对象路径 - - - Vertical faces do not form a loop - ignoring - 垂直面没有形成回路 - 忽略 - Pocket does not support shape %s.%s 口袋不支持形状 %s.%s + + + Vertical faces do not form a loop - ignoring + 垂直面没有形成回路 - 忽略 + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces 从一个或多个面创建一个路径口袋对象 - - - Vertical faces do not form a loop - ignoring - 垂直面没有形成回路 - 忽略 - - - - Pocket does not support shape %s.%s - 口袋不支持形状 %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - 传递扩展 - - - - The distance the facing operation will extend beyond the boundary shape. - 所面临的操作将延伸到超出边界形状的距离。 - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - 边缘轮廓铣 - - - - Profile based on edges - 基于边缘的轮廓铣 - - - - Face Profile - 面轮廓铣 - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - 不支持的 PathToolController 模板版本%s - Error updating TC: %s 更新 TC 时出错: %s - - Error updating TC: %s - 更新 TC 时出错: %s + + Unsupported PathToolController template version %s + 不支持的 PathToolController 模板版本%s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + 从选定路径创建数组 + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper 请选择一个路径对象 - - - Please select a Path object - 请选择路径对象 - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up 创建连杆修整 - - - Edit Dogbone Dress-up - 编辑连杆修整 - - - - Dogbone Dress-up - 连杆修整 - - - - Creates a Dogbone Dress-up object from a selected path - 从所选路径创建连杆修整对象 - - - - Please select one path object - 请选择一个路径对象 - - - - The selected object is not a path - 所选对象不是路径 - - - - Create Dogbone Dress-up - 创建连杆修整 - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up 创建修整 - - - DragKnife Dress-up - 拖刀修整 - - - - Modifies a path to add dragknife corner actions - 修改添加 dragknife 角动作的路径 - - - - Please select one path object - 请选择一个路径对象 - - - - The selected object is not a path - 所选对象不是路径 - - - - Please select a Path object - 请选择路径对象 - - - - Create Dress-up - 创建修整 - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - 进刀路径样式 - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. 斜坡角度。 + + + RampEntry Dress-up + 斜切修整 + + + + Creates a Ramp Entry Dress-up object from a selected path + 从选定路径创建斜切修整对象 + + + + The base path to modify + 要修改的基路径 + + + + Angle of ramp. + 斜坡角度。 + + + + RampEntry Dress-up + 斜切修整 + + + + Creates a Ramp Entry Dress-up object from a selected path + 从选定路径创建斜切修整对象 + Path_DressupTag - - - Tag Dress-up - 标签修整 - - - - Creates a Tag Dress-up object from a selected path - 从所选路径创建标签修整 - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. 标记圆角的半径。 + + + The base path to modify + 要修改的基路径 + + + + Width of tags. + 标记的宽度。 + + + + Tag Dress-up + 标签修整 + + + + Creates a Tag Dress-up object from a selected path + 从所选路径创建标签修整 + + + + Radius of the fillet for the tag. + 标记圆角的半径。 + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object 创建一个路径跃点对象 - - - Please select one path object - - 请选择一个路径对象 - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper 所选对象不是路径 - - - Create Hop - 创建跃点 - - - - Creates a Path Hop object - 创建一个路径跃点对象 - Please select one path object 请选择一个路径对象 + + + Create Hop + 创建跃点 + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + 检查 G 代码 + + + + Inspects the G-code contents of a path + 检查路径的 G 代码内容 + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object 创建选择平面对象 + + + Create a Selection Plane object + 创建选择平面对象 + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - 未检测到任何问题, {} 已通过基本的完整性检查。 - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges 从两个边缘完成循环选择 - - - Finish Selecting Loop - 完成选择循环 - - - - Complete loop selection from two edges - 从两个边缘完成循环选择 - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2378,21 +2467,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path 创建另一个路径的非参数副本 - - - Simple Copy - 简单副本 - - - - Creates a non-parametric copy of another path - 创建另一个路径的非参数副本 - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2406,16 +2480,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock 在工件上模拟路径G代码 - - - CAM Simulator - CAM 模拟器 - - - - Simulate Path G-Code on stock - 在工件上模拟路径G代码 - Path_Stop @@ -2448,7 +2512,7 @@ If it is necessary to set the FinalDepth manually please select a different oper 此操作需要安装 OpenCamLib。 - + This operation requires OpenCamLib to be installed. 此操作需要安装 OpenCamLib。 @@ -2494,12 +2558,12 @@ If it is necessary to set the FinalDepth manually please select a different oper 将工具控制器添加到作业中 - + Add Tool Controller to the Job 将工具控制器添加到作业中 - + Add Tool Controller 添加工具控制器 @@ -2568,15 +2632,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (* tbl) - + Open tooltable 打开 tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable xml (*. xml);;HeeksCAD tooltable (* tooltable) - Save tooltable @@ -2817,6 +2876,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable xml (*. xml);;HeeksCAD tooltable (* tooltable) + Object not found @@ -2833,19 +2897,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable xml (*. xml);;LinuxCNC tooltable (* tbl) - - PathCustom - - - The gcode to be inserted - 要插入的G代码 - - - - The tool controller that will be used to calculate the path - 用于计算刀轨的刀具控制器 - - PathDressup_Dogbone diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm index a2856b8d8a..76554200c5 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 8085f0434f..f60acc9b1b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -204,14 +204,14 @@ Enable pecking - - Height to clear top of material - Height to clear top of material + + Enable pecking + Enable pecking - - Diameters of the holes - Diameters of the holes + + Enable dwell + Enable dwell @@ -219,24 +219,44 @@ Calculate the tip length and subtract from final depth - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth - - Enable pecking - Enable pecking + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 - + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + Orientation plane of CNC path Orientation plane of CNC path - - Enable dwell - Enable dwell + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. @@ -254,19 +274,19 @@ Profile round holes - - Orientation plane of CNC path - Orientation plane of CNC path + + The base object this collision refers to + The base object this collision refers to - - Shape to use for calculating Boundary - Shape to use for calculating Boundary + + Profile round holes + Profile round holes - - Profile holes as well as the outline - Profile holes as well as the outline + + The base object this collision refers to + The base object this collision refers to @@ -309,14 +329,14 @@ Angle of the zigzag pattern - - Maximum distance before a miter join is truncated - 斜切下的最大距離已被截斷 + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern + Angle of the zigzag pattern @@ -329,9 +349,9 @@ 圖樣方式 - - Angle of the zigzag pattern - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program @@ -373,21 +393,6 @@ Rapid rate for horizontal moves Rapid rate for horizontal moves - - - Direction of spindle rotation - Direction of spindle rotation - - - - Feed rate for vertical moves in Z - Feed rate for vertical moves in Z - - - - Feed rate for horizontal moves - 水平移動的進給的速度 - The base geometry of this toolpath @@ -561,6 +566,36 @@ Path + + + Edit + 編輯 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignoring vertex + + + + Edit + 編輯 + + + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s + Didn't find job %s @@ -587,19 +622,14 @@ Parent job %s doesn't have a base object - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -621,6 +651,109 @@ Pick Start Point Pick Start Point + + + Heights + Heights + + + + AreaOp Operation + AreaOp Operation + + + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Depth Warning + Depth Warning + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Unable to create path for face(s). + Unable to create path for face(s). + List of disabled features @@ -671,51 +804,6 @@ &Path &Path - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Project Setup - 專案建立 - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Edit - 編輯 - this object already in the list @@ -751,6 +839,14 @@ Create a Profile based on edge selection + + PathAdaptive + + + Adaptive + Adaptive + + PathAreaOp @@ -764,17 +860,45 @@ no job for op %s found. - + job %s has no Base. job %s has no Base. - PathAdaptive + PathCustom - - Adaptive - Adaptive + + The gcode to be inserted + The gcode to be inserted + + + + The tool controller that will be used to calculate the path + 此工具控制器將用於計算軌跡 + + + + The gcode to be inserted + The gcode to be inserted + + + + PathDeburr + + + The desired width of the chamfer + The desired width of the chamfer + + + + The additional depth of the tool path + The additional depth of the tool path + + + + Deburr + Deburr @@ -851,8 +975,8 @@ - Drilling - 鑽孔 + Creates a Path Drilling object from a features of a base object + Creates a Path Drilling object from a features of a base object @@ -872,23 +996,10 @@ Additional base objects to be engraved Additional base objects to be engraved - - - PathDeburr - - Deburr - Deburr - - - - The desired width of the chamfer - The desired width of the chamfer - - - - The additional depth of the tool path - The additional depth of the tool path + + Engrave + Engrave @@ -974,26 +1085,11 @@ Start cutting from the inside or outside Start cutting from the inside or outside - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - Start cutting from the inside or outside Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - Radius increment (must be smaller than tool diameter) - PathJob @@ -1023,9 +1119,24 @@ Unsupported stock type %s (%d) - - Stock not from Base bound box! - Stock not from Base bound box! + + Select the Post Processor + 選擇一個後處理器 + + + + Arguments for the Post Processor (specific to the script) + 後處理器爭議（針對程式碼） + + + + Stock not a box! + Stock not a box! + + + + For computing Paths; smaller increases accuracy, but slows down computation + 計算軌跡用；小幅增加準確度，但會降低計算速度 @@ -1043,9 +1154,9 @@ Collection of tool controllers available for this job. - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) + + Select the Post Processor + 選擇一個後處理器 @@ -1053,9 +1164,9 @@ 此專案的 NC 輸出檔案 - - Select the Post Processor - 選擇一個後處理器 + + Arguments for the Post Processor (specific to the script) + 後處理器爭議（針對程式碼） @@ -1063,9 +1174,9 @@ SetupSheet holding the settings for this job - - An optional description for this job - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation + 計算軌跡用；小幅增加準確度，但會降低計算速度 @@ -1108,14 +1219,9 @@ Unsupported stock type - - 2D - 2D - - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Jobs + Jobs @@ -1145,6 +1251,11 @@ Holds the max Z value of Stock Holds the max Z value of Stock + + + Holds the min Z value of Stock + Holds the min Z value of Stock + Make False, to prevent operation from generating code @@ -1166,9 +1277,9 @@ Base locations for this operation - - Holds the calculated value for the StartDepth - Holds the calculated value for the StartDepth + + Holds the calculated value for the FinalDepth + Holds the calculated value for the FinalDepth @@ -1181,14 +1292,9 @@ Final Depth of Tool- lowest value in Z - - Holds the max Z value of Stock - Holds the max Z value of Stock - - - - Holds the min Z value of Stock - Holds the min Z value of Stock + + Starting Depth internal use only for derived values + Starting Depth internal use only for derived values @@ -1196,9 +1302,19 @@ Make False, to prevent operation from generating code - - Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + + An optional comment for this Operation + An optional comment for this Operation + + + + User Assigned Label + User Assigned Label + + + + Incremental Step Down of Tool + Incremental Step Down of Tool @@ -1215,11 +1331,6 @@ Make True, if specifying a Start Point Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - 此工具控制器將用於計算軌跡 - Base Geometry @@ -1242,6 +1353,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths Depths + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + PathPocket @@ -1255,16 +1371,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces Creates a Path 3D Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - Pocket does not support shape %s.%s Pocket does not support shape %s.%s + + + Vertical faces do not form a loop - ignoring + Vertical faces do not form a loop - ignoring + Adaptive clearing and profiling @@ -1305,31 +1421,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - Vertical faces do not form a loop - ignoring - - - - Pocket does not support shape %s.%s - Pocket does not support shape %s.%s - - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. - Generating toolpath with libarea offsets. @@ -1345,11 +1436,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - Uses the outline of the base geometry. @@ -1370,16 +1456,6 @@ If it is necessary to set the FinalDepth manually please select a different oper When enabled connected extension edges are combined to wires. When enabled connected extension edges are combined to wires. - - - Match B rotations to model (error in FreeCAD rendering). - Match B rotations to model (error in FreeCAD rendering). - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - PathProfile @@ -1403,26 +1479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces Profile based on face or faces - - - Edge Profile - Edge Profile - - - - Profile based on edges - Profile based on edges - - - - Face Profile - Face Profile - - - - Profile based on face or faces - Profile based on face or faces - The tool number in use @@ -1607,6 +1663,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. Default speed for vertical rapid moves. + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + + + + Default speed for horizontal rapid moves. + Default speed for horizontal rapid moves. + + + + Default speed for vertical rapid moves. + Default speed for vertical rapid moves. + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + Expression set for the SafeHeight of new operations. + Expression set for the SafeHeight of new operations. + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + Expression set for the ClearanceHeight of new operations. + Expression set for the ClearanceHeight of new operations. + PathStock @@ -1683,20 +1789,15 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController - - - Unsupported PathToolController template version %s - Unsupported PathToolController template version %s - Error updating TC: %s Error updating TC: %s - - Error updating TC: %s - Error updating TC: %s + + Unsupported PathToolController template version %s + Unsupported PathToolController template version %s @@ -1732,6 +1833,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Creates an array from a selected path + Creates an array from a selected path + + + + Please select exactly one path object + Please select exactly one path object + Path_Comment @@ -1791,11 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select one path object - - - Please select a Path object - Please select a Path object - Dress-up @@ -1902,36 +2008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up Create Dogbone Dress-up - - - Edit Dogbone Dress-up - Edit Dogbone Dress-up - - - - Dogbone Dress-up - Dogbone Dress-up - - - - Creates a Dogbone Dress-up object from a selected path - Creates a Dogbone Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Create Dogbone Dress-up - Create Dogbone Dress-up - Path_DressupDragKnife @@ -1965,36 +2041,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up Create Dress-up - - - DragKnife Dress-up - DragKnife Dress-up - - - - Modifies a path to add dragknife corner actions - Modifies a path to add dragknife corner actions - - - - Please select one path object - Please select one path object - - - - The selected object is not a path - The selected object is not a path - - - - Please select a Path object - Please select a Path object - - - - Create Dress-up - Create Dress-up - Path_DressupLeadInOut @@ -2013,21 +2059,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center The Mode of Point Radiusoffset or Center - - - The Style of LeadIn the Path - The Style of LeadIn the Path - - - - The Style of LeadOut the Path - The Style of LeadOut the Path - - - - The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center - LeadInOut Dressup @@ -2038,6 +2069,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + LeadInOut Dressup + LeadInOut Dressup + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Path_DressupRampEntry @@ -2051,19 +2092,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. Angle of ramp. + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + + + + The base path to modify + The base path to modify + + + + Angle of ramp. + Angle of ramp. + + + + RampEntry Dress-up + RampEntry Dress-up + + + + Creates a Ramp Entry Dress-up object from a selected path + Creates a Ramp Entry Dress-up object from a selected path + Path_DressupTag - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - The base path to modify @@ -2089,6 +2150,51 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. Radius of the fillet for the tag. + + + The base path to modify + The base path to modify + + + + Width of tags. + Width of tags. + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Radius of the fillet for the tag. + Radius of the fillet for the tag. + + + + Locations of inserted holding tags + Locations of inserted holding tags + + + + IDs of disabled holding tags + IDs of disabled holding tags + + + + Factor determining the # of segments used to approximate rounded tags. + Factor determining the # of segments used to approximate rounded tags. + + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + Base Path is empty. @@ -2125,13 +2231,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object - - - Please select one path object - - Please select one path object - - The selected object is not a path @@ -2139,21 +2238,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Create Hop - Create Hop - - - - Creates a Path Hop object - Creates a Path Hop object - Please select one path object Please select one path object + + + Create Hop + Create Hop + Path_Inspect @@ -2177,6 +2271,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object Please select exactly one path object + + + Inspect G-code + Inspect G-code + + + + Inspects the G-code contents of a path + Inspects the G-code contents of a path + Path_Job @@ -2246,6 +2350,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object Create a Selection Plane object + + + Create a Selection Plane object + Create a Selection Plane object + Path_Post @@ -2310,11 +2419,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. - It appears the machine limits haven't been set. Not able to check path extents. @@ -2335,16 +2439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges Complete loop selection from two edges - - - Finish Selecting Loop - Finish Selecting Loop - - - - Complete loop selection from two edges - Complete loop selection from two edges - Path_SetupSheet @@ -2353,11 +2447,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet Edit SetupSheet - - - Edit SetupSheet - Edit SetupSheet - Path_SimpleCopy @@ -2377,21 +2466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path 對另一個路徑進行無參數之複製 - - - Simple Copy - 不與原本物件連動之複製 - - - - Creates a non-parametric copy of another path - 對另一個路徑進行無參數之複製 - - - - Please select exactly one path object - Please select exactly one path object - Path_Simulator @@ -2405,16 +2479,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Simulate Path G-Code on stock Simulate Path G-Code on stock - - - CAM Simulator - CAM Simulator - - - - Simulate Path G-Code on stock - Simulate Path G-Code on stock - Path_Stop @@ -2447,7 +2511,7 @@ If it is necessary to set the FinalDepth manually please select a different oper This operation requires OpenCamLib to be installed. - + This operation requires OpenCamLib to be installed. This operation requires OpenCamLib to be installed. @@ -2493,12 +2557,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller to the Job - + Add Tool Controller to the Job Add Tool Controller to the Job - + Add Tool Controller Add Tool Controller @@ -2567,15 +2631,10 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) - + Open tooltable Open tooltable - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - Save tooltable @@ -2816,6 +2875,11 @@ If it is necessary to set the FinalDepth manually please select a different oper mm mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + Object not found @@ -2832,19 +2896,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - The gcode to be inserted - - - - The tool controller that will be used to calculate the path - 此工具控制器將用於計算軌跡 - - PathDressup_Dogbone diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm index ba433403df..3ec5a3ea63 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts index 68cbd56057..0599c7e3cb 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + Die aktuelle Kamera ist nicht perspektivisch und damit kann das Ergebnis anders aussehen als erwartet. +Möchten Sie fortfahren? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + Die aktuelle Kamera ist nicht perspektivisch und damit kann das Ergebnis anders aussehen als erwartet. +Möchten Sie fortfahren? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm index d8e22fd454..7e948b72d2 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts index 3f37ac6929..91fd8e0e78 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts @@ -181,8 +181,7 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + La vista de cámara actual no está en perspectiva por lo que el resultado de la imagen de POV-Ray podría verse distinto a lo que esperas. ¿Deseas continuar? @@ -215,8 +214,7 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + La vista de cámara actual no está en perspectiva por lo que el resultado de la imagen de luxrender podría verse distinto a lo que esperas. ¿Deseas continuar? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm index 6865b7e4d1..c339e9e97b 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.ts index 3256866f99..ade69d9723 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + Uneko bistaren kamera ez dago perspektiban eta emaitzatzat emango duen POV-Ray irudia espero denaren desberdina izan daiteke. +Jarraitu nahi duzu? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + Uneko bistaren kamera ez dago perspektiban eta emaitzatzat emango duen luxrender irudia espero denaren desberdina izan daiteke. +Jarraitu nahi duzu? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm index 0526dce631..4fb4238499 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts index d472c5bbf9..142d921a6f 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts @@ -181,8 +181,7 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + La vue actuelle n'est pas en perspective, donc le résultat de l'image de POV-Ray pourrait être différent de ce que vous attendez. Voulez-vous continuer? @@ -215,8 +214,7 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + La vue actuelle n'est pas en perspective, donc le résultat de l'image de Luxrender pourrait être différent de ce que vous attendez. Voulez-vous continuer? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm index 005703c52d..7a84fa304c 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.ts index e5b06b717f..0f24310021 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + A actual vista de cámara non ten perspectiva e polo tanto o resultado en POV-Ray da imaxe pode asemellar diferente á desexada. +Queres continuar? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + A actual vista de cámara non ten perspectiva e polo tanto o resultado en luxrender da imaxe pode asemellar diferente á desexada. +Queres continuar? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm index 813c3121b9..64a50c0393 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts index a01a583504..38443c9084 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts @@ -181,8 +181,7 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + Trenutni prikaz kamere nije perspektiva i tako rezultat POV-Ray slike kasnije može izgledati drugačije od očekivanoga. Želite li nastaviti? @@ -215,8 +214,7 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + Trenutni prikaz kamere nije perspektiva i takav rezultat luxrender-slike može kasnije izgledati drugačije od očekivanoga. Želite li nastaviti? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm index f2f9947ba0..c8420e6e5c 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts index 391c1e2c3a..f641867b8d 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + A jelenlegi kamera nézet nem távoli nézet, így a kép Nézőpont-fánysugár eredménye később eltérhet az elvárttól. +Folytatni szeretné? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + A jelenlegi kamera nézet nem távoli nézet, így a kép luxrender eredménye később eltérhet az elvárttól. +Folytatni szeretné? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm index e041c744ba..cc660c254e 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts index 0b00199502..ef0e03295f 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts @@ -181,8 +181,7 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + La vista della camera corrente non è in prospettiva e quindi l'immagine POV-Ray risultante potrebbe apparire diversa da quella attesa. Si desidera continuare? @@ -215,8 +214,7 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + La vista della camera corrente non è in prospettiva e quindi l'immagine Pov-Ray risultante potrebbe apparire diversa da quella attesa. Si desidera continuare? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm index fb1a321e49..ecd812186d 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts index 983bffa4e1..c2e6d1629b 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + A vista atual não está em perspectiva e, portanto, a imagem POV-Ray resultante pode parecer diferente do que era esperado. +Deseja continuar? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + A vista atual não está em perspectiva e, portanto, a imagem luxrender resultante pode parecer diferente do que era esperado. +Deseja continuar? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm index 5cfd00f3ea..47600876a1 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts index a60c514616..6c8d42980c 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + Kamera trenutnega pogleda ni perspektivna in zato bo rezultat slike POV-Ray morda kasneje izgledal drugače kot pričakovano. +Ali želite nadaljevati? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + Kamera trenutnega pogleda ni perspektivna in zato bo rezultat slike Luxrender morda kasneje izgledal drugače kot pričakovano. +Ali želite nadaljevati? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm index a17fb1d669..159ec1fe96 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.ts index cbf39dad28..225f607a2f 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + La càmera de la vista actual no és en perspectiva i per tant el resultat de la imatge de POV-Ray podria ser diferent del que esperàveu. +Voleu continuar? @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + La càmera de la vista actual no és en perspectiva i per tant el resultat de la imatge de LuxRender podria ser diferent del que esperàveu. +Voleu continuar? diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm index a62b250dd5..f489dafaf5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts index f2bdfbbb96..fc97096cd2 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts @@ -181,8 +181,8 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. -Do you want to continue? + 当前的视图照相机不是透视图, 因此POV-Ray图像的结果可能与您预期的不同。 +要继续吗？ @@ -215,8 +215,8 @@ Do you want to continue? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. -Do you want to continue? + 当前的视图照相机不是透视图, 因此luxrender图像的结果可能与您预期的不同。 +要继续吗？ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm index 1d47712e82..dce1028837 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts index 3b3554bc67..722d6e19da 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts @@ -29,12 +29,12 @@ Approximate B-spline surface... - B-spline azalera hurbildua... + Hurbildu B-spline gainazalera... Approximate a B-spline surface - Hurbildu B-spline azalera batera + Hurbildu B-spline gainazal batera @@ -52,7 +52,7 @@ Poisson surface reconstruction - Poisson azaleraren berreraikitzea + Poisson gainazalaren berreraikitzea @@ -79,7 +79,7 @@ Fit B-spline surface - Doitu B-spline azalera + Doitu B-spline gainazala diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm index 6180d3a59f..4fc2604f9a 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts index f9df2db18b..f2ff4a9b13 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts @@ -106,7 +106,7 @@ Settings - Settings + Paràmetres diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm index 475666df01..5da36d7bc7 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts index c177241389..6c04bbf444 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts @@ -441,7 +441,7 @@ Set default speed - Set default speed + Establir velocitat per defecte diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm index dc3e4d0450..a53c47d7d1 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts index 39c391b1cb..4ab0424501 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts @@ -441,7 +441,7 @@ Set default speed - Set default speed + 设置默认速度 @@ -451,7 +451,7 @@ Set default continuity - Set default continuity + 设置默认连续性 @@ -461,7 +461,7 @@ Set default acceleration - Set default acceleration + 设置默认加速度 diff --git a/src/Mod/Ship/resources/translations/Ship_eu.qm b/src/Mod/Ship/resources/translations/Ship_eu.qm index 31f7112461..1d057dbd72 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_eu.qm and b/src/Mod/Ship/resources/translations/Ship_eu.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_eu.ts b/src/Mod/Ship/resources/translations/Ship_eu.ts index 005e4b4fde..48d78e897f 100644 --- a/src/Mod/Ship/resources/translations/Ship_eu.ts +++ b/src/Mod/Ship/resources/translations/Ship_eu.ts @@ -285,7 +285,7 @@ Tank volume operation failed. The tool is retrying that slightly moving the free surface position - Andel-bolumenaren eragiketak huts egin du. Tresna eragiketa berriro egiten saiatzen ari da, azalera askearen posizioa pixka bat mugituz + Andel-bolumenaren eragiketak huts egin du. Tresna eragiketa berriro egiten saiatzen ari da, gainazal askearen posizioa pixka bat mugituz @@ -355,7 +355,7 @@ Boolean operation failed when trying to get the underwater side. The tool is retrying such operation slightly moving the free surface position - Eragiketa boolearrak huts egin du ur azpiko aldea eskuratzen saiatzean. Tresna eragiketa berriro egiten saiatzen ari da, azalera askearen posizioa pixka bat mugituz + Eragiketa boolearrak huts egin du ur azpiko aldea eskuratzen saiatzean. Tresna eragiketa berriro egiten saiatzen ari da, gainazal askearen posizioa pixka bat mugituz diff --git a/src/Mod/Ship/resources/translations/Ship_hu.qm b/src/Mod/Ship/resources/translations/Ship_hu.qm index b5ac6d51dc..41dca94fc4 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_hu.qm and b/src/Mod/Ship/resources/translations/Ship_hu.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_hu.ts b/src/Mod/Ship/resources/translations/Ship_hu.ts index 7dbe99652a..daa149da59 100644 --- a/src/Mod/Ship/resources/translations/Ship_hu.ts +++ b/src/Mod/Ship/resources/translations/Ship_hu.ts @@ -111,7 +111,7 @@ Outline draw - Külső vonal rajzolása + Körvonal rajzolása @@ -563,7 +563,7 @@ Outline draw - Külső vonal rajzolása + Körvonal rajzolása diff --git a/src/Mod/Ship/resources/translations/Ship_nl.qm b/src/Mod/Ship/resources/translations/Ship_nl.qm index 5054aaf928..165b3e63f9 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_nl.qm and b/src/Mod/Ship/resources/translations/Ship_nl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_nl.ts b/src/Mod/Ship/resources/translations/Ship_nl.ts index 3ae6633787..3d8affcfff 100644 --- a/src/Mod/Ship/resources/translations/Ship_nl.ts +++ b/src/Mod/Ship/resources/translations/Ship_nl.ts @@ -16,7 +16,7 @@ True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + True als het een geldige scheepsinstantie is, anders False @@ -36,17 +36,17 @@ Set of external faces of the ship hull - Set of external faces of the ship hull + Set van buitenkanten van de scheepsromp Set of weight instances - Set of weight instances + Set van gewichten Set of tank instances - Set of tank instances + Set van tanks @@ -77,7 +77,7 @@ Create a new ship instance on top of the hull geometry - Create a new ship instance on top of the hull geometry + Maak een nieuwe scheepsinstantie bovenop de geometrie van de romp @@ -90,7 +90,7 @@ Plot the ship hydrostatics - Plot the ship hydrostatics + Teken de hydrostatica van het schip uit @@ -103,7 +103,7 @@ Load an example ship hull geometry. - Load an example ship hull geometry. + Laad een voorbeeld van een scheepsrompgeometrie. @@ -190,12 +190,12 @@ Please create or load a ship hull geometry before using this tool - Please create or load a ship hull geometry before using this tool + Gelieve een scheepsrompgeometrie aan te maken of te laden alvorens dit gereedschap te gebruiken Ship objects can only be created on top of hull geometry (no solid found at selected objects) - Ship objects can only be created on top of hull geometry (no solid found at selected objects) + Scheepsobjecten kunnen alleen boven op de rompgeometrie aangemaakt worden (geen vaste vorm gevonden op geselecteerde objecten) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm index 3217f6507e..fe527217ea 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index ea7b5d75c7..0c314c9749 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Erzeugt ein rechteckiges Array der Geometrie mit Bezug auf den zuletzt ausgewählten Punkt @@ -2733,7 +2733,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Sie können nicht den Bogen einer Ellipse auf den anderen Bogen der gleichen Ellipse einschränken. Wählen Sie nur einen Bogen einer Ellipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index f6d8a1ae64..2cd3653898 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index 145118ba44..9d89e607c7 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Crea un patrón de matriz rectangular de la geometría, tomando como referencia el último punto seleccionado @@ -2732,7 +2732,7 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + No puedes restringir internamente un arco de elipse con otro arco de elipse. Selecciona un solo arco de elipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm index 21cf5eb6ce..41d819944a 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index 2e319a53f2..9730c14e41 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Geometriaren matrize-eredu laukizuzena sortzen du, erreferentzia modura hautatutako azken puntua hartuta @@ -2733,7 +2733,7 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Ezin duzu elipse-arku bat barnetik beste elipse-arku batekin murriztu. Hautatu elipse-arku bakar bat. @@ -3331,7 +3331,7 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Font size - Letra-tipoaren tamaina + Letra-tamaina diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm index 2c2db23332..62fc48aa0e 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index ff4cf714e4..5d88079804 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Créer une matrice rectangulaire de la géométrie en prenant comme référence le dernier point sélectionné @@ -2733,7 +2733,7 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Vous ne pouvez pas contraindre un arc d'ellipse à la géométrie interne d'un autre arc d'ellipse. Sélectionnez un seul arc d'ellipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm index 06f2aeb0f0..f129f75cda 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts index bcb40c900c..89a3272ba6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Fai un patrón de matriz rectangular da xeometría collendo as referencias do último punto escolmado @@ -2731,7 +2731,7 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Non podes constrinxir internamente un arco de elipse noutro arco de elipse. Escolma só un arco de elipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm index 53dcd257ac..1f190241a7 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index 03261aa025..c79c225525 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Stvara pravokutnu matricu uzorka geometrije uzimajući kao referencu zadnje odabranu točku @@ -2733,7 +2733,7 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Ne možete interno ograničiti luk elipse na drugi luk elipse. Odaberite samo jedan luk elipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm index 3e6a660cf9..da1945f0d5 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index e6144f550b..d23a51f38a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Létrehoz egy téglalap alakú tömb mintát a geometriáról, az utolsó kijelölt referenciapont figyelembe vételével @@ -2733,7 +2733,7 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Nem kényszeríthet belsőleg egy ellipszis ívet egy másik ellipszis ívhez. Csak egy ellipszis ívet jelöljön be. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm index 19b60c91bc..a23dc5ab4c 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index d30ef28607..656f321ad0 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Crea una serie rettangolare della geometria usando come riferimento l'ultimo punto selezionato @@ -2733,7 +2733,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Non è possibile applicare il vincolo allineamento interno di un arco di ellisse su altri archi di ellisse. Selezionare un solo arco di ellisse. @@ -3210,7 +3210,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Create array - Crea schiera + Crea serie @@ -3220,7 +3220,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Number of columns of the linear array - Numero di colonne della matrice lineare + Numero di colonne della serie lineare @@ -3230,7 +3230,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Number of rows of the linear array - Numero di righe della matrice lineare + Numero di righe della serie lineare @@ -3240,12 +3240,12 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Equal vertical/horizontal spacing - Uguale spaziatura verticale/orizzontale + Spaziatura verticale/orizzontale uguale If selected, each element in the array is constrained with respect to the others using construction lines - Se selezionato, ogni elemento della schiera è vincolato rispetto gli altri utilizzando le linee di costruzione + Se selezionato, ogni elemento della serie è vincolato rispetto gli altri utilizzando le linee di costruzione @@ -3292,7 +3292,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Create array - Crea schiera + Crea serie @@ -3302,7 +3302,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Number of columns of the linear array - Numero di colonne della matrice lineare + Numero di colonne della serie lineare diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm index 841842ba9c..ed352a89a5 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index 5a29140020..cd98bab448 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + 最後に選択された点を参照位置としてジオメトリーの格子状配列パターンを作成 @@ -2733,7 +2733,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + 楕円弧を他の楕円弧に対して内部拘束することはできません。 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm index 0c5e5a2a49..2ce705be14 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts index cdc056ffa6..85c3cf78a6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts @@ -3108,7 +3108,7 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška This object belongs to another body, can't link. - Šis objektas priklauso kitam kūnui, todėl jo negalima susieti. + Šis daiktas yra kito daikto narys, todėl jo negalima susieti. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm index e02842848e..416f843357 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index 6d3a32714a..ca74463cd3 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Cria um padrão retangular da geometria com referência ao último ponto selecionado @@ -2733,7 +2733,7 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Você não pode restringir internamente um arco de elipse em outro arco de elipse. Selecione apenas um arco de elipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index a30de38f52..148bfd3c5b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index e23cbacf31..0143c22a3d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Создает прямоугольный массив из геометрии, взяв за основу последнюю выделенную точку @@ -2731,7 +2731,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Нельзя ограничить дугу эллипса другой дугой эллипса. Должна быть выделена максимум одна дуга эллипса. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm index ea02f54c25..360b024866 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index a0d5f02af0..4d5672f799 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Ustvari pravokotni vzorec geometrije glede na zadnjo izbrano točko @@ -2733,7 +2733,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Loka elipse ni mogoče notranje omejiti z drugim lokom elipse. Izberi samo en lok elipse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm index 1428ccb19f..3216277e32 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index 1f26a85f07..f62b78fa5c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Son seçilen noktayı referans alarak geometriye dikdörtgen şeklinde bir desen oluşturur @@ -2733,7 +2733,7 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + Dahili olarak bir elipsin yayını diğer elipsin yayı üzerinde sınırlandıramazsınız. Sadece bir elips yayı seçin. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm index bbf7d62b69..e749807a42 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts index c5b9e192c0..d748a3c945 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts @@ -924,7 +924,7 @@ Create a B-spline via control points in the sketch. - Create a B-spline via control points in the sketch. + Crea un B-spline donats els punts de control en l'esbós. @@ -1122,7 +1122,7 @@ Create a periodic B-spline via control points in the sketch. - Create a periodic B-spline via control points in the sketch. + Crea un B-spline periòdic donats uns punts de control en l'esbós. @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + Crea un patró de matriu rectangular de la geometria prenent com a referència l'últim punt seleccionat @@ -1883,37 +1883,37 @@ Autoconstrain error: Unsolvable sketch while applying coincident constraints. - Autoconstrain error: Unsolvable sketch while applying coincident constraints. + Error de restricció automàtica: esbós irresoluble si s'apliquen restriccions coincidents. Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. - Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. + Error de restricció automàtica: esbós irresoluble si s'apliquen restriccions verticals/horitzontals. Autoconstrain error: Unsolvable sketch while applying equality constraints. - Autoconstrain error: Unsolvable sketch while applying equality constraints. + Error de restricció automàtica: esbós irresoluble si s'apliquen restriccions d'igualtat. Autoconstrain error: Unsolvable sketch without constraints. - Autoconstrain error: Unsolvable sketch without constraints. + Error de restricció: esbós irresoluble sense restriccions. Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. - Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. + Error de restricció: esbós irresoluble després d'aplicar restriccions verticals i horitzontals. Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. - Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. + Error de restricció: esbós irresoluble si s'apliquen restriccions de punt a punt. Autoconstrain error: Unsolvable sketch after applying equality constraints. - Autoconstrain error: Unsolvable sketch after applying equality constraints. + Error de restricció: esbós irresoluble si s'apliquen restriccions d'igualtat. @@ -1928,7 +1928,7 @@ BSpline Geometry Index (GeoID) is out of bounds. - BSpline Geometry Index (GeoID) is out of bounds. + L'índex de geometria BSpline (GeoID) està fora de les restriccions. @@ -1938,7 +1938,7 @@ The Geometry Index (GeoId) provided is not a B-spline curve. - The Geometry Index (GeoId) provided is not a B-spline curve. + L'índex de geometria (GeoId) proporcionat no és una corba de B-spline. @@ -1948,7 +1948,7 @@ The multiplicity cannot be increased beyond the degree of the B-spline. - The multiplicity cannot be increased beyond the degree of the B-spline. + La multiplicitat no es pot augmentar més enllà del grau del B-spline. @@ -2245,7 +2245,7 @@ The selected edge already has a horizontal constraint! - The selected edge already has a horizontal constraint! + L'aresta seleccionada ja té una restricció horitzontal. @@ -2253,7 +2253,7 @@ The selected edge already has a vertical constraint! - The selected edge already has a vertical constraint! + L'aresta seleccionada ja té una restricció vertical. @@ -2263,7 +2263,7 @@ The selected edge already has a Block constraint! - The selected edge already has a Block constraint! + L'aresta seleccionada ja té una restricció de Bloc. @@ -2283,7 +2283,7 @@ There are more than one fixed points selected. Select a maximum of one fixed point! - There are more than one fixed points selected. Select a maximum of one fixed point! + Hi ha més d'un punt fixe seleccionat! Seleccioneu-ne com a màxim un de fixe. @@ -2419,7 +2419,7 @@ Cannot add a fixed x-coordinate constraint on the origin point! - Cannot add a fixed x-coordinate constraint on the origin point! + No es pot afegir una restricció de coordenada x fixa sobre el punt d'origen. @@ -2435,7 +2435,7 @@ Cannot add a fixed y-coordinate constraint on the origin point! - Cannot add a fixed y-coordinate constraint on the origin point! + No es pot afegir una restricció de coordenada y fixa sobre el punt d'origen. @@ -2686,7 +2686,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. + No podeu restringir internament una el·lipse sobre una altra el·lipse. Seleccioneu-ne sols una. @@ -2704,7 +2704,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nothing to constrain - Nothing to constrain + No hi ha res per a restringir @@ -2729,12 +2729,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + No podeu restringir internament un arc d'el·lipse sobre un altre arc d'el·lipse. Seleccioneu-ne sols un. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. + No podeu restringir internament una el·lipse o un arc d'el·lipse. Seleccioneu només una el·lipse o un arc d'el·lipse. @@ -2924,7 +2924,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. + L'esbós seleccionat no és paral·lel a aquest esbós. Manteniu les tecles Ctrl+Alt per a permetre esbossos no paral·lels. @@ -3241,7 +3241,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c If selected, each element in the array is constrained with respect to the others using construction lines - If selected, each element in the array is constrained with respect to the others using construction lines + Si està seleccionat, cada element de la matriu es restringeix respecte als altres utilitzant les línies de construcció @@ -3676,11 +3676,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c %2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15 - %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. - -%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). - -Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15 + S'han trobat %1 arcs de geometria externa inversa. Els seus extrems estan encerclats en la vista 3D. %2 restriccions s'apliquen als extrems. Les restriccions s'han llistat en la vista d'informe (menú Vista -> Panells -> Vista d'informe). Feu clic a «Intercanvia els extrems en les restriccions» per a reassignar els extrems. Feu això només una vegada en esbossos creats en una versió del FreeCAD anterior a la v0.15 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm index 61c58c7516..25a4f40e89 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 2d2b0e4da5..a2dc0fc6c4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -924,7 +924,7 @@ Create a B-spline via control points in the sketch. - Create a B-spline via control points in the sketch. + 通过草图控制点创建B样条。 @@ -1122,7 +1122,7 @@ Create a periodic B-spline via control points in the sketch. - Create a periodic B-spline via control points in the sketch. + 通过草图控制点创建周期性B样条。 @@ -1553,7 +1553,7 @@ Creates a rectangular array pattern of the geometry taking as reference the last selected point - Creates a rectangular array pattern of the geometry taking as reference the last selected point + 以最后所选的点作为参考，创建图形的长方形阵列 @@ -1883,42 +1883,42 @@ Autoconstrain error: Unsolvable sketch while applying coincident constraints. - Autoconstrain error: Unsolvable sketch while applying coincident constraints. + 自动约束错误: 应用重合约束时草图无法求解。 Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. - Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. + 自动约束错误: 应用垂直/水平约束时草图无法求解。 Autoconstrain error: Unsolvable sketch while applying equality constraints. - Autoconstrain error: Unsolvable sketch while applying equality constraints. + 自动约束错误: 应用相等约束时草图无法求解。 Autoconstrain error: Unsolvable sketch without constraints. - Autoconstrain error: Unsolvable sketch without constraints. + 自动约束错误: 无约束的不可解草图。 Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. - Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. + 自动约束错误: 应用垂直和水平约束后草图无法求解。 Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. - Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. + 自动约束错误: 应用点到点约束后草图无法求解。 Autoconstrain error: Unsolvable sketch after applying equality constraints. - Autoconstrain error: Unsolvable sketch after applying equality constraints. + 自动约束错误: 应用相等约束后草图无法求解。 Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. + 无法猜测曲线的交叉点。尝试在你打算做圆角的曲线顶点之间添加一个重合约束。 @@ -1948,7 +1948,7 @@ The multiplicity cannot be increased beyond the degree of the B-spline. - The multiplicity cannot be increased beyond the degree of the B-spline. + 多重性无法增加到超过B样条的自由度。 @@ -2245,7 +2245,7 @@ The selected edge already has a horizontal constraint! - The selected edge already has a horizontal constraint! + 所选边已有水平约束! @@ -2253,7 +2253,7 @@ The selected edge already has a vertical constraint! - The selected edge already has a vertical constraint! + 所选边已有垂直约束! @@ -2263,7 +2263,7 @@ The selected edge already has a Block constraint! - The selected edge already has a Block constraint! + 所选边已有块约束! @@ -2283,7 +2283,7 @@ There are more than one fixed points selected. Select a maximum of one fixed point! - There are more than one fixed points selected. Select a maximum of one fixed point! + 选取了多个固定点。最多只能选择一个固定点! @@ -2309,7 +2309,7 @@ A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. + 如果草绘未解决或存在冗余和/或冲突约束, 则无法添加块约束。 @@ -2419,7 +2419,7 @@ Cannot add a fixed x-coordinate constraint on the origin point! - Cannot add a fixed x-coordinate constraint on the origin point! + 无法于原点加入固定x座标的约束! @@ -2435,7 +2435,7 @@ Cannot add a fixed y-coordinate constraint on the origin point! - Cannot add a fixed y-coordinate constraint on the origin point! + 无法于原点加入固定y座标的约束! @@ -2664,7 +2664,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Cannot create constraint with external geometry only!! - Cannot create constraint with external geometry only!! + 无法仅通过外部几何图形创建约束 @@ -2690,7 +2690,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. + 不能将一个椭圆约束在另一个椭圆内。只能选择一个椭圆。 @@ -2708,7 +2708,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nothing to constrain - Nothing to constrain + 无可约束元素 @@ -2733,12 +2733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. + 您无法将一椭圆之孤与另一椭圆之弧设定内部约束，请仅选择单一椭圆之弧。 You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. + 您无法将一椭圆与另一椭圆之弧设定内部约束，请仅选择单一椭圆或椭圆之弧。 @@ -2928,7 +2928,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. + 所选草图与此草图不平行。按住 Ctrl + Alt 以允许不平行的草图。 @@ -3245,7 +3245,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c If selected, each element in the array is constrained with respect to the others using construction lines - If selected, each element in the array is constrained with respect to the others using construction lines + 如果选中，阵列中的每个元素依据辅助线进行约束 @@ -3341,7 +3341,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ask for value after creating a dimensional constraint - Ask for value after creating a dimensional constraint + 创建尺寸约束后询问值 @@ -3356,7 +3356,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint Creation "Continue Mode" - Constraint Creation "Continue Mode" + 约束创建 "继续模式" @@ -3680,11 +3680,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c %2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15 - %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + %1 发现了反向的外部几何圆弧。它们的端点在3维视图中环绕。 -%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). +%2 约束链接到端点。这些约束已在报告视图 (菜单视图->> 视图->> 报告视图) 中列出。 -Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15 +单击 "在约束中交换端点" 按钮以重新分配端点。仅在 FreeCAD 中创建的草图是 v0.15以下旧版本时使用。 @@ -3714,12 +3714,12 @@ However, no constraints linking to the endpoints were found. Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). - Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). + 已启用方向锁定并重新计算%1 约束。这些约束已在报告视图 (菜单视图->> 视图->> 报告视图) 中列出。 Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Note that for all future constraints, the locking still defaults to ON. - Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Note that for all future constraints, the locking still defaults to ON. + 对%1 约束禁用了方向锁定。这些约束已在报告视图 (菜单视图->> 面板->> 报告视图) 中列出。请注意, 对于未来所有的约束, 锁定仍然默认为 ON。 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm index 195b5e3d7e..0bd0e72e3d 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.ts index f0e3b51fbc..92c758993b 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + ادمج الخلايا المحددة @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + افصل الخلايا المدمجة سابقا @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + اجعل النص في الخلايا المحددة بالخط العريض @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + اجعل النص في الخلايا المحددة بالخط المائل diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm index 846174ce39..b97c5ed736 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts index 34e70154e3..950004bf99 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Ausgewählte Zellen zusammenführen @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Vorher zusammengeführte Zellen trennen @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Text in ausgewählten Zellen fett @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Text in ausgewählten Zellen kursiv diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm index 898b9609c0..fdd90f9f30 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts index 1d3266ab52..08e421e210 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Fusionar celdas seleccionadas @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Dividir celdas previamente fusionadas @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Establecer texto en las celdas seleccionadas en negrita @@ -204,11 +204,11 @@ Italic text - Cursiva + Texto en cursiva Set text in selected cells italic - Set text in selected cells italic + Establecer texto en las celdas seleccionadas en cursiva diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm index 0142590213..3eabe4bec2 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts index 1afbef85ee..527f04012d 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Fusionatu hautatutako gelaxkak @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Zatitu lehenago fusionatutako gelaxkak @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Ezarri letra lodia hautatutako gelaxken testuan @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Ezarri letra etzana hautatutako gelaxken testuan diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm index b16f019a08..7d44810983 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts index 6490523447..c40e2be5dd 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Fusionner les cellules sélectionnées @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Scinder les cellules précédemment fusionnées @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Rendre gras le texte des cellules sélectionnées @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Rendre italique le texte des cellules sélectionnées diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm index 7ee4a7d40b..1645e87743 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.ts index 6d43cb078b..5240ff854e 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Fundir celas escolmadas @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Dividir celas previamente mesturadas @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Conxunto de texto en celas escolmadas en negro @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Conxunto de texto en celas escolmadas en itálica diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm index 27000bdbe4..6e58598329 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts index 7390ef0d4f..e8324abe16 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Spajanja odabranih ćelija @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Razdjeli prije spojene ćelije @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Postavi tekst u odabranim ćelijama podebljano @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Postavi tekst u odabranim ćelijama ukošeno diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm index e17d798b12..a1bfa791e4 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts index a917ba7ec9..2ff2cac921 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Kijelölt bejegyzések összefűzése @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Előzőleg összefűzött cellák felosztása @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Félkövér szöveg beállítása a kijelölt cellákban @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Dőlt szöveg beállítása a kijelölt cellákban diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm index 3be04d5dbf..53764e5a96 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts index ea97436f4a..3d3581581e 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Unisci le celle selezionate @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Dividi le celle precedentemente unite @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Imposta testo in grassetto nelle celle selezionate @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Imposta testo in corsivo nelle celle selezionate diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm index f96f34db0d..e22a3b75ca 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts index 0da828ab1c..57ccfa67d6 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + 選択したセルを結合 @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + 結合されているセルを分割 @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + 選択したセルのテキストに太字を設定 @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + 選択したセルのテキストに斜体を設定 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm index 2b808aa0c3..7c8969fd3b 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts index fd478cf8ea..3eeb19f58d 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Mesclar células selecionadas @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Dividir células previamente mescladas @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Definir texto em células selecionadas para Negrito @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Definir texto em células selecionadas para Itálico diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm index 2d29359b25..397630384f 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts index e3f1240230..48b06cb7b6 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Объединить выделенные ячейки @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Разделить ранее объединенные ячейки @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Сделать текст в выбранных ячейках жирным шрифтом @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Сделать текст в выбранных ячейках курсивом diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm index 8192da275b..67593c54eb 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts index 3e82509d1e..d42cd48d8d 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Združi izbrane celice @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Razcepi predhodno združene celice @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Nastavi besedilo v izbranih celicah na krepko @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Nastavi besedilo v izbranih celicah na ležeče diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm index 46809d9a6a..5a2a155fa9 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts index 85189777b9..ee40040325 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Об'єднати обрані комірки @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Розділити раніше обʼєднані комірки @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + У виділених комірках відобразити текст жирним шрифтом @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + У виділених комірках відобразити текст курсивом @@ -223,14 +223,14 @@ Underline text in selected cells - Underline text in selected cells + У виділених комірках зробити текст підкресленим ColorPickerPopup Custom Color - Custom Color + Колір, який встановлюється користувачем @@ -427,7 +427,7 @@ Custom Color - Custom Color + Колір, який встановлюється користувачем diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm index 60374117b1..1581078e64 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.ts index c0db1d7b3c..dc30a27b0b 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.ts @@ -103,7 +103,7 @@ Vertically center-align contents of selected cells - Vertically center-align contents of selected cells + Alineació vertical i centrada dels continguts de les cel·les seleccionades @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + Fusiona les cel·les seleccionades @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + Divideix les cel·les prèviament fusionades @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + Estableix el text en negreta en les cel·les seleccionades @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + Estableix el text en cursiva en les cel·les seleccionades @@ -223,14 +223,14 @@ Underline text in selected cells - Underline text in selected cells + Subratlla el text en les cel·les seleccionades ColorPickerPopup Custom Color - Custom Color + Color personalitzat @@ -257,7 +257,7 @@ Horizontal - Horizontal + Horitzontal Left @@ -273,7 +273,7 @@ Vertical - Vertical + Vertical Top @@ -427,7 +427,7 @@ Custom Color - Custom Color + Color personalitzat diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm index 030fca2f55..cf8f6641ab 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts index 40833efbc2..ad959b6ea3 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts @@ -103,7 +103,7 @@ Vertically center-align contents of selected cells - Vertically center-align contents of selected cells + 竖直居中对齐所选单元格的内容 @@ -148,7 +148,7 @@ Merge selected cells - Merge selected cells + 合并所选单元格 @@ -178,7 +178,7 @@ Split previously merged cells - Split previously merged cells + 分割以前合并的单元格 @@ -193,7 +193,7 @@ Set text in selected cells bold - Set text in selected cells bold + 加粗所选单元格内的文本 @@ -208,7 +208,7 @@ Set text in selected cells italic - Set text in selected cells italic + 设置所选单元格内的文本为斜体 @@ -223,14 +223,14 @@ Underline text in selected cells - Underline text in selected cells + 所选单元格内的文本设置下划线 ColorPickerPopup Custom Color - Custom Color + 自定义颜色 @@ -427,7 +427,7 @@ Custom Color - Custom Color + 自定义颜色 diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm index 93474ae1d2..84e3e839a0 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts index d50ec095ad..b879560c92 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts @@ -157,7 +157,7 @@ Wie Sie FreeCAD selbst kompilieren können, der FreeCAD-Quellcode strukturiert i You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Sie können einen benutzerdefinierten Ordner zur Anzeige konfigurieren. Menü Bearbeiten -> Einstellungen -> Start -> Zusätzlichen Ordner anzeigen @@ -272,7 +272,7 @@ Wie Sie FreeCAD selbst kompilieren können, der FreeCAD-Quellcode strukturiert i Show additional folder - Zusätzliche Ordner anzeigen + Zusätzlichen Ordner anzeigen diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm index 35f38dc768..44e7e63232 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts index 066d33b16b..06b963c896 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Puede configurar una carpeta personalizada para mostrar aquí en el menú Editar -> Preferencias -> Inicio -> Mostrar carpeta adicional diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm index a363fc8a29..7f6da93226 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts index 1d9eb4eaaf..8f032a165e 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Karpeta pertsonalizatu bat konfiguratu daiteke hemen erakutsia izan dadin. Horretarako aukera: 'Editatu -> Hobespenak -> Hasiera -> Erakutsi karpeta gehigarria' diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm index 861e13fd51..65335ce857 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts index 647d2a3bf1..2450eaf0cd 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Vous pouvez configurer un dossier personnalisé à afficher ici dans le menu Modifier -> Préférences -> Début -> Afficher un dossier supplémentaire diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm index ada7ffa9ee..11d3ec67b1 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_gl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_gl.ts index 2880fdb9ab..937515ea1d 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_gl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_gl.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Podes configurar un cartafol persoal amosado aquí en menú Editar -> Preferencias -> Inicio -> Amosar cartafol adicional diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm index 4c57e64e04..405b58fa4d 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts index d94d3b3e14..224bcad8f1 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Možete konfigurirati prilagođenu mapu za prikaz u izborniku Uredi-> Postavke-> Start-> Pokaži dodatne mape diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm index a8585ddaac..3517c98594 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts index 5dda83d9e0..780e4467a1 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Az ebben a menüben megjelenítendő egyéni mappát beállíthatod a Szerkesztés -> Beállítások -> Start -> További mappa menüpontban diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm index 82f55855e5..e4b4f5f605 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts index ab0c46fd48..d56c876063 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + È possibile configurare una cartella personalizzata da visualizzare qui nel menu Modifica-> Preferenze-> Start-> Mostra la cartella aggiuntiva diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm index fa764869b6..3cf8ebb229 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts index 571b61c7e5..adb3b70b93 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts @@ -76,7 +76,7 @@ This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. - This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. + このセクションには開発者のための情報があります。自分で FreeCAD をコンパイルする方法、FreeCAD のソースコードがどのように構成されていてそれをどのように読み進めるのか、また新しいワークベンチの開発方法や自分のアプリケーションに FreeCAD を埋め込む方法についてなどがあります。 @@ -86,7 +86,7 @@ The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available. - The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available. + FreeCAD マニュアルはこのウィキの情報をもっと直線的に見るもう1つの方法です。本のように読めるよう作られていて、上記のハブのたくさんのページを少しずつ読んでいくことができるでしょう。<a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">電子書籍バージョン</a>も利用可能です。 diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm index 3cfb572fed..0ecb52e870 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts index 77f96fb08d..0fc7f14ead 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts @@ -76,7 +76,7 @@ This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. - This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. + Sekcja zawiera materiały dla programistów: Jak skompilować samodzielnie FreeCAD, jaka jest struktura kodu FreeCAD + jak się po nim poruszać, jak rozwijać nowe środowiska lub jak osadzać FreeCAD we własnej aplikacji. @@ -86,12 +86,12 @@ The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available. - The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available. + Podręcznik FreeCAD jest kolejnym, bardziej liniowym sposobem prezentacji informacji zawartych na tej stronie wiki. Jest stworzony tak by można go było czytać jak książkę oraz by wstępnie wprowadzić Cie do treści innych stron z powyższej listy. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">Wersja w postaci e-booka</a> jest również dostępna. Workbenches documentation - Dokumentacja Środowisk + Dokumentacja środowisk @@ -366,7 +366,7 @@ Page text color - Page text color + Kolor czcionki na stronie @@ -381,7 +381,7 @@ Box background color - Box background color + Kolor tła strony @@ -406,7 +406,7 @@ Use FreeCAD style sheet - Use FreeCAD style sheet + Użyj styl strony FreeCAD @@ -446,7 +446,7 @@ Should the start page be closed after loading? - Should the start page be closed after loading? + Czy strona startowa ma być zamknięta po załadowaniu? @@ -456,7 +456,7 @@ Close start page after loading - Close start page after loading + Zamknij stronę startową po załadowaniu diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm index d5a396571f..8323c3f04c 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts index 3e8d013c45..6edd2849cb 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Você pode configurar uma pasta personalizada para exibir aqui no menu Editar -> Preferências -> Iniciar -> Mostrar pasta adicional diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm index 754d85724e..3bdb01e713 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts index ec9a07f5bb..c1daf13d7b 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Можно настроить пользовательскую папку для отображения здесь в меню Правка-> предпочтения-> запуск-> показывать дополнительную папку diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm index 6407b8240e..d173c30789 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts index 98144a5a20..54decc3a43 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Mapo po meri, ki bo prikazana tukaj, lahko nastavite v meniju Uredi -> Možnosti -> Začetek -> Prikaži dodatno mapo diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm index 4cab2cb91d..c82c539075 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.ts index 812494e5ba..73b26d14eb 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.ts @@ -76,7 +76,7 @@ This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. - This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. + Aquesta secció conté materials per a desenvolupadors: com compilar FreeCAD, com està estructurat el codi font de FreeCAD + com navegar per ell, i com desenvolupar nous bancs de treball, i/o incrustar FreeCAD en la vostra pròpia aplicació. @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + Podeu configurar una carpeta personalitzada per a mostrar ací en el menú Edita-> Preferències-> Inici-> Mostra carpeta addicional diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm index 1dc9f91683..9c3848dc7c 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts index fdf6ca6913..b01374533f 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts @@ -111,12 +111,12 @@ If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! - If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! + 如果这是您第一次在论坛上发布评论，请一定 <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=2264">先阅读指南</a>！ FreeCAD also maintains a public <a href="https://www.freecadweb.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting. - FreeCAD also maintains a public <a href="https://www.freecadweb.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting. + FreeCAD 也保持开放 <a href="https://www.freecadweb.org/tracker">bug Tracker</a> 任何人都可以提交bug 和提出新功能。为了避免造成额外的工作，并且提供最佳机会查看您的bug被解决，请确保您阅读了 <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=5236">错误提交指南</a> 之前。 @@ -136,7 +136,7 @@ Cannot fetch information from GitHub. <a href="EnableDownload.py">Authorize FreeCAD to access the internet</a> and reload the Start page. - Cannot fetch information from GitHub. <a href="EnableDownload.py">Authorize FreeCAD to access the internet</a> and reload the Start page. + 无法从 GitHub 获取信息。 <a href="EnableDownload.py">授权 FreeCAD 访问互联网</a> 并重新加载开始页面。 @@ -146,7 +146,7 @@ Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecadweb.org/wiki/Downloads">available options</a> if you wish to obtain a development version. - Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecadweb.org/wiki/Downloads">available options</a> if you wish to obtain a development version. + 以下是添加到 <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD 源代码</a>的最新更改。 这些更改可能无法反映在你目前正在运行的 FreeCAD 版本中。请检查 <a href="https://www.freecadweb.org/wiki/Downloads">可用的选项</a> 如果您想获取开发版本。 @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder + 您可以在菜单编辑 -> 首选项 -> 开始 -> 显示额外文件夹中配置自定义文件夹 @@ -228,12 +228,12 @@ Start Page - Start Page + 开始页面 Displays the start page in a browser view - Displays the start page in a browser view + 在浏览器视图中显示起始页 @@ -241,12 +241,12 @@ Start page options - Start page options + 开始页面选项 Start page template - Start page template + 开始页面模板 @@ -256,22 +256,22 @@ Contents - Contents + 内容 Show forum - Show forum + 显示论坛 Show examples folder contents - Show examples folder contents + 显示示例文件夹内容 Show additional folder - Show additional folder + 显示其他文件夹 @@ -281,12 +281,12 @@ If this is checked, the latest posts from the FreeCAD forum will be displayed on the Activity tab - If this is checked, the latest posts from the FreeCAD forum will be displayed on the Activity tab + 如果选中此项，FreeCAD 论坛的最新帖子将会在活动选项卡上显示 An optional custom folder to be displayed at the bottom of the first page - An optional custom folder to be displayed at the bottom of the first page + 第一页底部显示可选的自定义文件夹 @@ -301,12 +301,12 @@ Fonts and colors - Fonts and colors + 字体和颜色 The background of the main start page area - The background of the main start page area + 开始页页面主背景 @@ -316,32 +316,32 @@ in FreeCAD - in FreeCAD + 在 FreeCAD中 In external browser - In external browser + 在外部浏览器中 Background color gradient down - Background color gradient down + 背景颜色向下渐变 The color of the version text - The color of the version text + 版本文本的颜色 Link color - Link color + 链接颜色 An optional image to display as background - An optional image to display as background + 可选的图像作为背景显示 @@ -351,27 +351,27 @@ Page background color - Page background color + 页面背景颜色 The color of the text on the main pages - The color of the text on the main pages + 主页文字的颜色 Background image - Background image + 背景图片 Page text color - Page text color + 页面文本颜色 The color of the links - The color of the links + 链接的颜色 @@ -386,27 +386,27 @@ The background color behind the panels - The background color behind the panels + 面板背后的背景颜色 The down gradient for the background color (currently unsupported) - The down gradient for the background color (currently unsupported) + 背景颜色的向下渐变(目前不支持) Open links - Open links + 打开链接 Background text color - Background text color + 背景文字颜色 Use FreeCAD style sheet - Use FreeCAD style sheet + 使用 FreeCAD 样式表 @@ -421,12 +421,12 @@ Arial,Helvetica,sans - Arial,Helvetica,sans + Arial,Helvetica,sans The base font size to use for all texts of the Start page - The base font size to use for all texts of the Start page + 用于开始页面所有文本的基本字体大小 @@ -436,7 +436,7 @@ Use gradient for New File icon - Use gradient for New File icon + 为新文件图标使用渐变 @@ -446,17 +446,17 @@ Should the start page be closed after loading? - Should the start page be closed after loading? + 加载后该开始页面是否关闭？ Switch workbench after loading - Switch workbench after loading + 加载后切换工作台 Close start page after loading - Close start page after loading + 加载后关闭开始页面 @@ -466,7 +466,7 @@ If FreeCAD is started by opening a file, apply the two settings above - If FreeCAD is started by opening a file, apply the two settings above + 如果FreeCAD 通过打开文件启动，请使用上面的两个设置 diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm index dd893d6fc7..3fadf8154f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts index 4423d4355c..6af07d127b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Voeg annotasie @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Lêer - + Export page as SVG Export page as SVG - + Export a page to an SVG file Voer 'n blad uit na 'n SVG-lêer @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Lêer - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Stoor Dxf lêer - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Standaard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Verkeerde keuse - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Kies 'n SVG-lêer om oop te maak - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Select exactly one Spreadsheet object. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Create a page first. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Alle lêers (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Wys tekening - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensions - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Square - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Dot - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Solid - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Stoor na PDF - + Different orientation Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size Different paper size - - + + The printer uses a different paper size than the drawing. Do you want to continue? The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed Opening file failed - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Stoor Dxf lêer - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Gekies: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Arrow + + + + Dot + Dot + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Geen + + + + Triangle + Triangle + + + + Inspection + Inspection + + + + Hexagon + Hexagon + + + + Square + Square + + + + Rectangle + Reghoek + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elements + + + + Vertical + Vertikaal + + + + Horizontal + Horisontaal + + + + Aligned + Aligned + + + + Color + Color + + + + Weight + Weight + + + + Style + Styl + + + + NoLine + NoLine + + + + Solid + Solid + + + + Dash + Dash + + + + Dot + Dot + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Dot - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Color - + Weight Weight - + Style Styl - + NoLine NoLine - + Solid Solid - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm index f6b00d0aa7..9ba0b9ad4b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts index 0c1423a636..16ad52b413 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File ملف - + Export page as SVG تصدير الصفحة بصيغة SVG - + Export a page to an SVG file توريد الصفحة علي ملف بصيغة SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File ملف - + Export page as DXF تصدير الصفحة بصيغة DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File حفظ ملف الـ Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry القيام بربط بُعْد مع شكل هندسي ثلاثي الأبعاد - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension إدراج بُعد زاوية جديد @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension إدراج بعد قُطْر جديد - + Insert a new diameter dimension feature إدراج خاصية جديدة لبُعْد القطر @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension إدراج بعد أفقي جديد - + Insert a new horizontal distance dimension إدراج بعد مسافة افقي جديد @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension إدراج بعد عمودي جديد - + Insert a new vertical distance dimension إدراج بعد مسافة عمودي جديد @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension إدراج بعد طول جديد @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template إدراج صفحة جديدة بإستخدام القالب - + Select a Template File تحديد ملف قالب - + Template (*.svg *.dxf) قالب (*.svg.* dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page إدراج صفحة إفتراضية جديدة @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page إدراج العرض في الصفحة @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View إدراج عرض التفاصيل @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group إدراج مجموعة الإسقاط - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view إدراج عرض جدول البيانات - + Inserts a view of a selected spreadsheet يقوم بإدراج عرض لجدول البيانات المختار @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol إدراج رمز الـ SVG - + Insert symbol from a svg file إدراج الرمز من ملف الـ Svg @@ -715,72 +820,77 @@ More functions - + Standard قياسي - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection إختيار خاطئ - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open قم بإختيار ملف الـ SVG لفتحه - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. تحديد عنصر واحد على الأقل. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Select exactly one Spreadsheet object. - + No Drawing View لا يتوفر أي عرض للرسم - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection لا يوجد أي عنصر ثلاثي الأبعاد في هذا الإختيار - + There are no 3D Edges or Vertices in your selection لا توجد أية حَوَافٍ ثلاثية الأبعاد أو قمم رؤوس في الإختيار الذي قمت به - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ إختيار غير صحيح - - + + Select an object first قم بإختيار عنصراً أولا - - + + Too many objects selected تم تحديد عدد كبير جدا من العناصر - - + + Create a page first. قم بإنشاء صفحة أولا. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ قم بتحديد صفحة واحدة بالضبط. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF تصدير الصفحة بصيغة PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG تصدير الصفحة بصيغة SVG - + FreeCAD SVG Export تصدير بصيغة الـ SVG - + Show drawing إظهار الرسم - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ أُنقر لتحديث النص - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ الأبعاد - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square مربع - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot نقطة - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid صلب - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &تصدير SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF تصدير PDF - + Different orientation توجيه مختلف - + The printer uses a different orientation than the drawing. Do you want to continue? تقوم الطابعة باستعمال توجيه مختلف عن التوجيه المستعمل في الرسم. هل ترغب في الإستمرار؟ - - + + Different paper size حجم ورق مختلف - - + + The printer uses a different paper size than the drawing. Do you want to continue? تقوم الطابعة باستعمال حجم ورق مختلف عن الحجم المستعمل في الرسم. هل ترغب في الإستمرار؟ - + Opening file failed تعذّر فتح الملف - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File حفظ ملف الـ Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: محدد: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + سهم + + + + Dot + نقطة + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + القيمة: + + + + Circular + Circular + + + + None + لا يوجد + + + + Triangle + مثلث + + + + Inspection + Inspection + + + + Hexagon + سداسي الأضلاع + + + + Square + مربع + + + + Rectangle + مستطيل + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + العناصر + + + + Vertical + رأسيا + + + + Horizontal + أفقيا + + + + Aligned + Aligned + + + + Color + لون + + + + Weight + Weight + + + + Style + Style + + + + NoLine + NoLine + + + + Solid + صلب + + + + Dash + Dash + + + + Dot + نقطة + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + مم + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot نقطة - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color لون - + Weight Weight - + Style Style - + NoLine NoLine - + Solid صلب - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Do you want to continue? القيمة: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm index 55321b5841..8260a16b69 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 54885cbfe0..5a37e50c7f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insereix Anotació @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fitxer - + Export page as SVG Exporta la Pàgina com a SVG - + Export a page to an SVG file Exportar una pàgina a un arxiu SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fitxer - + Export page as DXF Exporta la pàgina com a DXF - + Export a page to a DXF file Exporta una pàgina a un fitxer DXF - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insereix una nova cota angular @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insereix una nova cota de diàmetre - + Insert a new diameter dimension feature Insereix una nova operació de cota de diàmetre @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insereix una nova cota horitzontal - + Insert a new horizontal distance dimension Insreix una nova cota de distància horitzonta @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insereix una nova cota vertical - + Insert a new vertical distance dimension Insereix una nova cota de distància vertical @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insereix una nova cota de longitud @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insereix una nova Pàgina utilitzant una Plantilla - + Select a Template File Selecciona un fitxer de plantilla - + Template (*.svg *.dxf) Plantilla (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insereix una nova Pàgina per defecte @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insereix una Vista a la Pàgina @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insereix una Vista de Detall @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Estàndard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Selecció incorrecta - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Triar un fitxer SVG per obrir - + Scalable Vector Graphic Vector grafic escalable - - + + Select at least one object. Selecciona com a mínim un objecte. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Seleccioneu exactament un objecte de full de càlcul. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Crear una pàgina primer. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Exporta la Pàgina com a PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporta la Pàgina com a SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Mostra el dibuix - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensions - + Arrow Style Estil de Fletxa @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Quadrat - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Punt - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Sòlid - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Exporta a PDF - + Different orientation Orientació diferent - + The printer uses a different orientation than the drawing. Do you want to continue? La impressora utilitza una orientació diferent que la del dibuix. Voleu continuar? - - + + Different paper size Mida de paper diferent - - + + The printer uses a different paper size than the drawing. Do you want to continue? La impressora utilitza una mida de paper diferent que la del dibuix. Voleu continuar? - + Opening file failed No s'ha pogut obrir l'arxiu - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionat: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Fletxa + + + + Dot + Punt + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Cap + + + + Triangle + Triangle + + + + Inspection + Inspection + + + + Hexagon + Hexàgon + + + + Square + Quadrat + + + + Rectangle + Rectangle + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elements + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Color + + + + Weight + Weight + + + + Style + Estil + + + + NoLine + NoLine + + + + Solid + Sòlid + + + + Dash + Dash + + + + Dot + Punt + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Punt - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Color - + Weight Weight - + Style Estil - + NoLine NoLine - + Solid Sòlid - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm index 88bcf39a88..945e670220 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index 399ec05524..e9e4d1957a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Vložit poznámku @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Vložit rovinu řezu - + Inserts a view of a Section Plane from Arch Workbench Vloží zobrazení roviny řezu z pracovního prostředí Arch @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Vložit Sepnutou skupinu @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Odstranit zobrazení ze Sepnuté skupiny - + Remove a View from Clip group Odstranit zobrazení ze Sepnuté skupiny @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Přidat zobrazení do Sepnuté skupiny - + Add a View to Clip group Přidat zobrazení do Sepnuté skupiny - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Vložit objekt z pracovního prostředí Draft - + Insert a View of a Draft Workbench object Vložit zobrazení objektu z pracovního prostředí Draft @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Soubor - + Export page as SVG Exportovat stránku do SVG - + Export a page to an SVG file Exportovat stránku do souboru SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Soubor - + Export page as DXF Exportovat stránku do DXF - + Export a page to a DXF file Exportovat stránku do souboru DXF - + Save Dxf File Uložit soubor Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Propojit kótu s 3D geometrií - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Vložit novou úhlovou kótu pomocí 3 bodů @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Vložit novou úhlovou kótu @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Vložit novou kótu průměru - + Insert a new diameter dimension feature Vložit novou kótu průměru @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Vložit novou horizontální kótu - + Insert a new horizontal distance dimension Vložit novou kótu horizontální vzdálenosti @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Vložit novou vertikální kótu - + Insert a new vertical distance dimension Vložit novou kótu vertikální vzdálenosti @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Vložit novou délkovou kótu @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Vložit novou stránku pomocí šablony - + Select a Template File Vyberte soubor šablony - + Template (*.svg *.dxf) Šablona (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Vložit novou výchozí stránku @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Vložit zobrazení na stránku @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Vložit zobrazení detailu @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Vložit zobrazení řezu na stránku @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Vložit skupinu promítání - + Insert multiple linked views of drawable object(s) Vložit několik propojených zobrazení objektu/ů + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Vložit zobrazení Tabulky - + Inserts a view of a selected spreadsheet Vloží zobrazení vybrané tabulky @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Vložit SVG Symbol - + Insert symbol from a svg file Vložit symbol ze souboru svg @@ -715,72 +820,77 @@ More functions - + Standard Standard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Neplatný výběr - - + + No Shapes or Groups in this selection Ve výběru nejsou tvary nebo skupiny - - + + Select at least 1 DrawViewPart object as Base. Vyberte alespoň 1 objekt zobrazení části jako základnu. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Vyberte právě jedno zobrazení pro přidání do skupiny. - + Select exactly one Clip group. Vyberte právě jedno zobrazení sepnuté skupiny. - + Clip and View must be from same Page. Sepnutí a Zobrazení musí být na společné stránce. - + Select exactly one View to remove from Group. Vyberte právě jedno zobrazení pro odstranění ze skupiny. - + View does not belong to a Clip Zobrazení není součástí Sepnutí - + Choose an SVG file to open Zvolte soubor SVG pro otevření - + Scalable Vector Graphic Škálovatelná vektorová grafika - - + + Select at least one object. Vyberte alespoň jeden objekt. - + There is no Section Plane in selection. Není vybrána rovina řezu. - + Select exactly one Spreadsheet object. Vyberte právě jeden objekt Tabulky. - + No Drawing View Žádné zobrazení výkresu - + Open Drawing View before attempting export to SVG. Otevřete zobrazení výkresu před exportem do SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Upozornění při výběru + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Vybraná hrana je BSplajn. Poloměr bude přibližný. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Vybraná hrana je BSplajn. Průměr bude přibližný. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Pro úhlovou kótu jsou potřeba dvě rovné hrany - + Need three points to make a 3 point Angle Dimension Pro úhlovou kótu pomocí 3 bodů jsou potřeba tři body - + There is no 3D object in your selection Ve Vašem výběru není žádný 3D objekt - + There are no 3D Edges or Vertices in your selection Ve výběru nejsou žádné 3D hrany nebo vrcholy - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Nesprávný výběr - - + + Select an object first Nejprve vyberte objekt - - + + Too many objects selected Příliš mnoho vybraných objektů - - + + Create a page first. Vytvořte nejprve stránku. - - + + No View of a Part in selection. Ve výběru není zobrazení součásti. - + No Feature with Shape in selection. Ve výběru není tvarový prvek. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Vyberte pouze 1 stránku. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Všechny soubory (*.*) - + Export Page As PDF Exportovat stránku do PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportovat stránku do SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Zobrazit výkres - + Toggle KeepUpdated Přepnout průběžné aktualizace @@ -1121,12 +1306,12 @@ Klikněte pro aktualizaci textu - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Rozměry - + Arrow Style Styl šipky @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Velikost textu kóty včetně jednotek - + Dimension arrowhead size in units Velikost kótovací šipky včetně jednotek - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Dekorace - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Nastaví velikost vrcholů na výkrese - + Vertex Scale Měřítko vrcholu - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Kruh - + Square Čtverec - + Section Line Style Styl čáry řezu - + Center Line Style Styl osy - + Matting Style Styl detailu - + Line type for centerlines Line type for centerlines - - + + NeverShow Nezobrazovat - + Line color for sectionlines Line color for sectionlines - + Line Group Name Název skupiny čar - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Barva vrcholu - + Vertex display color Vertex display color - - + + Dash Čárka - - + + Dot Tečka - - + + DashDot Čárka tečka - - + + DashDotDot Čárka tečka tečka - - + + Solid Těleso - + Center Line Color Barva osy - + Section Line Color Barva čáry řezu @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exportovat SVG - + Toggle &Keep Updated Přepnout průběžné aktualizace - + Toggle &Frames Přepnout rámce - + Export DXF Export DXF - + Export PDF Export PDF - + Different orientation Jiná orientace - + The printer uses a different orientation than the drawing. Do you want to continue? Tiskárna používá jinou orientaci než výkres. Chcete pokračovat? - - + + Different paper size Jiný formát papíru - - + + The printer uses a different paper size than the drawing. Do you want to continue? Tiskárna používá jiný formát papíru než výkres. Chcete pokračovat? - + Opening file failed Otevření souboru selhalo - + Can not open file %1 for writing. Soubor %1 nelze otevřít pro zápis. - + Save Dxf File Uložit soubor Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Vybráno: @@ -1721,16 +1921,230 @@ Chcete pokračovat? TechDrawGui::QGVPage - + Drawing page: Stránka výkresu: - + exported from FreeCAD document: exportované z FreeCAD dokumentu: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Šipka + + + + Dot + Tečka + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Hodnota: + + + + Circular + Circular + + + + None + Žádný + + + + Triangle + Trojúhelník + + + + Inspection + Inspection + + + + Hexagon + Šestiúhelník + + + + Square + Čtverec + + + + Rectangle + Obdélník + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementy + + + + Vertical + Svisle + + + + Horizontal + Vodorovně + + + + Aligned + Aligned + + + + Color + Byrva + + + + Weight + Weight + + + + Style + Styl + + + + NoLine + NoLine + + + + Solid + Těleso + + + + Dash + Čárka + + + + Dot + Tečka + + + + DashDot + Čárka tečka + + + + DashDotDot + Čárka tečka tečka + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Chcete pokračovat? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Fajfka - - - + + + Dot Tečka - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Byrva - + Weight Weight - + Style Styl - + NoLine NoLine - + Solid Těleso - + Dash Čárka - + DashDot Čárka tečka - + DashDotDot Čárka tečka tečka - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Chcete pokračovat? Hodnota: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm index a388d2f4a7..0879d572f6 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 811e5a0c10..bb3055d315 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Technisches Zeichnen - - + + Insert Annotation Anmerkung einfügen @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw Technisches Zeichnen - + Insert a Section Plane Einfügen einer Schnittebene - + Inserts a view of a Section Plane from Arch Workbench Fügt einen Ansicht auf eine Schnittebene aus der Arch Workbench ein @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw Technisches Zeichnen - - + + Insert Clip group Ausschnittsgruppe einfügen @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw Technisches Zeichnen - + Remove View from ClipGroup Ansicht aus Ausschnittsgruppe entfernen - + Remove a View from Clip group Ansicht aus Ausschnittsgruppe entfernen @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw Technisches Zeichnen - + Add View to Clip group Ansicht zu Ausschnittsgruppe hinzufügen - + Add a View to Clip group Ansicht zu Ausschnittsgruppe hinzufügen - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw Technisches Zeichnen - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Technisches Zeichnen + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Technisches Zeichnen + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + Technisches Zeichnen + + + Insert a DraftWB object DraftWB-Objekt einfügen - + Insert a View of a Draft Workbench object Füge die Ansicht eines Draft Arbeitsbereichsobjekts ein @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Datei - + Export page as SVG Seite als SVG exportieren - + Export a page to an SVG file Seite in SVG-Datei exportieren @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Datei - + Export page as DXF Exportiere Seite als DXF - + Export a page to a DXF file Exportiert die Seite als DXF - + Save Dxf File Speichern als Dxf Datei - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Technisches Zeichnen + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw Technisches Zeichnen - - + + Add a line to a view - Add a line to a view + Eine Linie zu einer Ansicht hinzufügen CmdTechDrawLinkDimension - + TechDraw Technisches Zeichnen - - + + Link a dimension to 3D geometry Eine Abmessung mit einer 3D-Geometrie verlinken - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Technisches Zeichnen - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Technisches Zeichnen + + + + Insert a new 3 point Angle dimension Fügt eine 3-Punkt Winkelvermassung ein @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw Technisches Zeichnen - - + + Insert a new angle dimension Winkel bemaßen @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw Technisches Zeichnen - - + + Insert a new balloon - Insert a new balloon + Einen neuen Balloon einfügen CmdTechDrawNewDiameterDimension - + TechDraw Technisches Zeichnen - + Insert a new diameter dimension Durchmesserbemassung einfügen - + Insert a new diameter dimension feature Durchmesserbemassungs Element einfügen @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw Technisches Zeichnen - + Insert a new horizontal dimension Horizontale Bemaßung einfügen - + Insert a new horizontal distance dimension Eine horizontale Abstandsbemaßung hinzufügen @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw Technisches Zeichnen - + Insert a new vertical dimension Vertikale Bemaßung einfügen - + Insert a new vertical distance dimension Eine vertikale Abstans-Bemaßung einfügen @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw Technisches Zeichnen - - + + Insert a new length dimension Längenbemaßung einfügen @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw Technisches Zeichnen + - Insert new Page using Template Neue Seite anhand einer Vorlage einfügen - + Select a Template File Wähle eine Vorlage - + Template (*.svg *.dxf) Vorlage (*.svg *.Dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw Technisches Zeichnen + - Insert new default Page Neue Standard Seite einfügen @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw Technisches Zeichnen + - Insert View in Page Ansicht einfügen @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw Technisches Zeichnen + - Insert Detail View Detailansicht einfügen @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw Technisches Zeichnen + - Insert Section View in Page Schnittansicht einfügen @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw Technisches Zeichnen - + Insert Projection Group Mehrseitenansicht einfügen - + Insert multiple linked views of drawable object(s) Mehrere verknüpfte Ansichten von Zeichenobjekt(en) einfügen + + CmdTechDrawQuadrant + + + TechDraw + Technisches Zeichnen + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw Technisches Zeichnen - - + + Add a rich text annotation - Add a rich text annotation + Anmerkung im "Rich Text"-Format hizufügen CmdTechDrawSpreadsheet - + TechDraw Technisches Zeichnen - + Insert Spreadsheet view Tabellenansicht einfügen - + Inserts a view of a selected spreadsheet Ansicht der ausgewählten Tabelle einfügen @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw Technisches Zeichnen - + Insert SVG Symbol SVG Symbol einfügen - + Insert symbol from a svg file SVG Symbol aus Datei einfügen @@ -555,38 +660,38 @@ Save changes - Save changes + Änderungen speichern Close editor - Close editor + Editor schließen Paragraph formatting - Paragraph formatting + Absatzformatierung Undo (CTRL+Z) - Undo (CTRL+Z) + Rückgängig (Strg+Z) Undo - Undo + Rückgängig machen Redo - Redo + Wiederherstellen Cut (CTRL+X) - Cut (CTRL+X) + Ausschneiden (STRG+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Kopieren (STRG+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Einfügen (STRG+V) Paste - Paste + Einfügen Link (CTRL+L) - Link (CTRL+L) + Link (STRG+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Kursiv (Ctrl+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Unterstreichen (Strg+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Durchgestrichen Strike Out - Strike Out + Durchgestrichen Bullet list (CTRL+-) - Bullet list (CTRL+-) + Aufzählung (STRG+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Nummerierte Liste (STRG+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Einzug verringern (STRG+,) Decrease indentation - Decrease indentation + Einzug verringern Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Einzug vergrößern (STRG+) Increase indentation - Increase indentation + Einzug vergrößern Text foreground color - Text foreground color + Standardfarbe für Text im Vordergrund Text background color - Text background color + Standardfarbe für Text im Hintergrund @@ -712,188 +817,201 @@ More functions - More functions + Weitere Funktionen - + Standard Standard - + Heading 1 - Heading 1 + Überschrift 1. Ordnung - + Heading 2 - Heading 2 + Überschrift 2. Ordnung - + Heading 3 - Heading 3 + Überschrift 3. Ordnung - + Heading 4 - Heading 4 + Überschrift 4. Ordnung - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Zeichenformatierung entfernen + + + + Remove all formatting + Alle Formatierungen entfernen + + + Edit document source - Edit document source + Dokumentenquelle bearbeiten - + Document source - Document source + Dokumentenquelle - + Create a link - Create a link + Link erstellen - + Link URL: - Link URL: + Link-URL: - + Select an image - Select an image + Bild auswählen - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Alle (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Falsche Auswahl - - + + No Shapes or Groups in this selection Keine Formen oder Gruppen in dieser Auswahl - - + + Select at least 1 DrawViewPart object as Base. Wähle mindestens 1 DrawViewPart-Objekt als Basis aus - + Select one Clip group and one View. - Select one Clip group and one View. + Wähle eine Ausschnittsgruppe und eine Ansicht. - + Select exactly one View to add to group. Wählen Sie genau eine Ansicht aus, die Sie zur Gruppe hinzufügen möchten. - + Select exactly one Clip group. Wählen Sie genau eine Ausschnittsgruppe aus. - + Clip and View must be from same Page. Ausschnitt und Ansicht müssen von der selben Seite sein. - + Select exactly one View to remove from Group. Wählen Sie genau eine Ansicht aus, die Sie aus der Gruppe entfernen möchten. - + View does not belong to a Clip Ansicht gehört nicht zu einem Ausschnitt - + Choose an SVG file to open Wählen Sie eine SVG-Datei zum Öffnen aus - + Scalable Vector Graphic Skalierbare Vektorgrafik - - + + Select at least one object. Wählen Sie mindestens ein Objekt. - + There is no Section Plane in selection. Die Auswahl enthält kein Schnittebene. - + Select exactly one Spreadsheet object. Wählen Sie genau ein Tabellen-Objekt. - + No Drawing View Keine Zeichnungsansicht - + Open Drawing View before attempting export to SVG. Öffnen Sie die Zeichnungsansichten vor dem Export nach SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Auswahl Warnung + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Die ausgewählte Kante ist eine BSpline. Der Radius wird angenähert. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Die ausgewählte Kante ist eine BSpline. Durchmesser wird angenähert. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Es werden zwei gerade Kanten für eine Winkelbemaßung benötigt - + Need three points to make a 3 point Angle Dimension Es werden 3 Punkte für eine Winkelbemaßung benötigt - + There is no 3D object in your selection Sie haben kein 3D-Objekt ausgewählt - + There are no 3D Edges or Vertices in your selection Es gibt keine 3D-Kanten oder Ecken in Ihrer Auswahl - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Falsche Auswahl - - + + Select an object first Zuerst ein Objekt auswählen - - + + Too many objects selected Zu viele Objekte ausgewählt - - + + Create a page first. Erstellen Sie zunächst eine Seite. - - + + No View of a Part in selection. Keine Teileansicht in der Auswahl. - + No Feature with Shape in selection. Kein Element einer Form in der Auswahl. - - + + + + + + + + Task In Progress - Task In Progress + Aufgabe in Bearbeitung - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Schließen Sie den aktiven Task-Dialog und versuchen Sie es erneut. - - + + + + + Selection Error - Selection Error + Auswahlfehler - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Kann keinen Header hinzufügen. Es wurde keine Basisansicht ausgewählt. - + + You must select a base View for the line. - You must select a base View for the line. + Sie müssen eine Basisansicht für die Zeile auswählen. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Wählen Sie genau 1 Seite. - + PDF (*.pdf) PDF (*.PDF) - - + + All Files (*.*) Alle Dateien (*.*) - + Export Page As PDF Seite als PDF-Datei exportieren - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Seite als SVG exportieren - + FreeCAD SVG Export FreeCAD SVG-Export - + Show drawing Zeichnung anzeigen - + Toggle KeepUpdated Automatisches Aktualisieren umschalten @@ -1121,24 +1306,34 @@ Text zum aktualisieren anklicken - + New Leader Line - New Leader Line + Neue Führungslinie - + Edit Leader Line - Edit Leader Line + Führungslinie bearbeiten Rich text creator - Rich text creator + Rich-Text Editor - + Rich text editor - Rich text editor + Rich-Text Editor + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Bemaßungen - + Arrow Style Pfeil-Darstellung @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Einheit an Dimensionstext anhängen Dimension text color - Dimension text color + Farbe des Dimensionstexts Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Zeichen zum Anzeigen der Druchmesser-Dimension Use system setting for decimal places. - Use system setting for decimal places. + Verwenden Sie die Systemeinstellung für Dezimalstellen. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Anzahl der Dezimalstellen, wenn nicht globale Einstellungen verwendet werden - + Dimension font size in units Schriftgröße in der Maßeinheit - + Dimension arrowhead size in units Größe der Pfeilspitze in der Maßeinheit - + Default Format - Default Format + Standardformat - + Custom format for Dimension text - Custom format for Dimension text + Benutzerdefiniertes Format für Dimensionstext - + Decorations Dekorationen - + Color for centerlines - Color for centerlines + Farbe für Mittellinen - + Adjusts size of vertices in drawing Passt die Größe der Ecken in der Zeichnung an - + Vertex Scale Eckpunkt skalierung - + Round or Square outline in Detail view - Round or Square outline in Detail view + Runder oder quadratischer Umriss der Detailansicht - + Round Runden - + Square Quadrat - + Section Line Style Linienstil für Schnitte - + Center Line Style Linienstil Mittellinie - + Matting Style Mattierungsstil - + Line type for centerlines - Line type for centerlines + Linientyp für Mittellinien - - + + NeverShow immer unsichtbar - + Line color for sectionlines - Line color for sectionlines + Linienfarbe für Auswahllinien - + Line Group Name Linien Gruppennamen - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Name des Eintrags in der LineGroup CSV-Datei - + Vertex Color Scheitelpunktfarbe - + Vertex display color - Vertex display color + Anzeigefarbe von Knoten - - + + Dash Bindestrich - - + + Dot Punkt - - + + DashDot Strich-Punkt - - + + DashDotDot Strich-Punkt-Punkt - - + + Solid Vollkörper - + Center Line Color Farbe der Mittellinie - + Section Line Color Farbe der Schnittlinie @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exportiere SVG - + Toggle &Keep Updated Automatisches Aktualisieren umschalten - + Toggle &Frames Rahmen umschalten - + Export DXF - Export DXF + Export nach DXF - + Export PDF PDF exportieren - + Different orientation Andere Ausrichtung - + The printer uses a different orientation than the drawing. Do you want to continue? Der Drucker verwendet eine andere Ausrichtung als die Zeichnung. Möchten Sie fortfahren? - - + + Different paper size Anderes Papierformat - - + + The printer uses a different paper size than the drawing. Do you want to continue? Der Drucker verwendet eine andere Papiergröße als die Zeichnung. Möchten Sie fortfahren? - + Opening file failed Fehler beim Öffnen der Datei - + Can not open file %1 for writing. Datei %1 kann nicht zum Schreiben geöffnet werden. - + Save Dxf File Speichern als Dxf Datei - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Ausgewählt: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Zeichnungsseite: - + exported from FreeCAD document: von FreeCAD Dokument exportiert: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Pfeil + + + + Dot + Punkt + + + + Start Symbol + Startsymbol + + + + Symbol: + Symbol: + + + + Value: + Wert: + + + + Circular + Circular + + + + None + Kein + + + + Triangle + Dreieck + + + + Inspection + Inspection + + + + Hexagon + Sechseck + + + + Square + Quadrat + + + + Rectangle + Rechteck + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Basis-Ansicht + + + + Elements + Elemente + + + + Vertical + Vertikale + + + + Horizontal + Horizontale + + + + Aligned + Aligned + + + + Color + Farbe + + + + Weight + Stärke + + + + Style + Stil + + + + NoLine + Keine Linie + + + + Solid + Vollkörper + + + + Dash + Bindestrich + + + + Dot + Punkt + + + + DashDot + Strich-Punkt + + + + DashDotDot + Strich-Punkt-Punkt + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Basis-Ansicht + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Linksklick, um einen Punkt zu setzen + + + + In progress edit abandoned. Start over. + Bearbeitung abgebrochen. Fang noch mal von vorne an. + + TechDrawGui::TaskGeomHatch @@ -1797,135 +2211,141 @@ Do you want to continue? Leader Line - Leader Line + Führungslinie Base View - Base View + Basis-Ansicht - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Startsymbol - - + + No Symbol - No Symbol + Kein Symbol - - + + Filled Triangle - Filled Triangle + Gefülltes Dreieck - - + + Open Triangle - Open Triangle + Offenes Dreieck - - + + Tick Senkrechter Strich - - - + + + Dot Punkt - - + + Open Circle - Open Circle + Offener Kreis - + + + Fork + Fork + + + End Symbol - End Symbol + Endsymbol - + Color Farbe - + Weight - Weight + Stärke - + Style Stil - + NoLine - NoLine + Keine Linie - + Solid Vollkörper - + Dash Bindestrich - + DashDot Strich-Punkt - + DashDotDot Strich-Punkt-Punkt - - + + Pick a starting point for leader line - Pick a starting point for leader line + Wähle einen Startpunkt für die Führunglinie - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Klicke und ziehe Markierungen, um die Führungszeile anzupassen - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Linksklick, um einen Punkt zu setzen - + Press OK or Cancel to continue - Press OK or Cancel to continue + Drücke OK oder ESC um fortzufahren - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Bearbeitung abgebrochen. Fang noch mal von vorne an. @@ -2150,27 +2570,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + Block für Anmerkungen in Rich Text Max Width - Max Width + Max. Breite Base Feature - Base Feature + Basisfunktion Show Frame - Show Frame + Rahmen anzeigen Start Rich Text Editor - Start Rich Text Editor + Rich Text Editor starten @@ -2286,4 +2706,28 @@ Do you want to continue? Wert: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm index 8c009675d1..f1ee9eeec3 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index 6284160459..6305804879 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Τεχνική Σχεδίαση - - + + Insert Annotation Εισαγωγή Περιγραφής @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw Τεχνική Σχεδίαση - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw Τεχνική Σχεδίαση - - + + Insert Clip group Εισαγωγή ομάδας Αποκοπής @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw Τεχνική Σχεδίαση - + Remove View from ClipGroup Αφαίρεση Προβολής από την Ομάδα Αποκοπής - + Remove a View from Clip group Αφαίρεση μιας Προβολής από την ομάδα Αποκοπής @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw Τεχνική Σχεδίαση - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Προσθήκη μιας Προβολής στην ομάδα Αποκοπής - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw Τεχνική Σχεδίαση - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Τεχνική Σχεδίαση + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Τεχνική Σχεδίαση + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + Τεχνική Σχεδίαση + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Αρχείο - + Export page as SVG Εξαγωγή Σελίδας ως SVG - + Export a page to an SVG file Εξαγάγετε μια σελίδα σε ένα αρχείο SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Αρχείο - + Export page as DXF Εξαγωγή σελίδας ως DXF - + Export a page to a DXF file Εξαγωγή μιας σελίδας σε αρχείο DXF - + Save Dxf File Αποθήκευση Αρχείου Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Τεχνική Σχεδίαση + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw Τεχνική Σχεδίαση - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw Τεχνική Σχεδίαση - - + + Link a dimension to 3D geometry Σύνδεση διάστασης με τρισδιάστατο γεωμετρικό στοιχείο - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Τεχνική Σχεδίαση - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Τεχνική Σχεδίαση + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw Τεχνική Σχεδίαση - - + + Insert a new angle dimension Εισαγωγή μιας νέας διάστασης γωνίας @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw Τεχνική Σχεδίαση - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw Τεχνική Σχεδίαση - + Insert a new diameter dimension Εισαγωγή μιας νέας διάστασης διαμέτρου - + Insert a new diameter dimension feature Εισαγωγή ενός νέου χαρακτηριστικού διάστασης διαμέτρου @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw Τεχνική Σχεδίαση - + Insert a new horizontal dimension Εισαγωγή μιας νέας οριζόντιας διάστασης - + Insert a new horizontal distance dimension Εισαγωγή μιας νέας διάστασης οριζόντιας απόστασης @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw Τεχνική Σχεδίαση - + Insert a new vertical dimension Εισαγωγή μιας νέας κατακόρυφης διάστασης - + Insert a new vertical distance dimension Εισαγωγή μιας νέας διάστασης κατακόρυφης απόστασης @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw Τεχνική Σχεδίαση - - + + Insert a new length dimension Εισαγωγή μιας νέας διάστασης μήκους @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw Τεχνική Σχεδίαση + - Insert new Page using Template Εισαγωγή νέας Σελίδας με τη χρήση Προτύπου - + Select a Template File Επιλέξτε ένα Αρχείο Προτύπου - + Template (*.svg *.dxf) Πρότυπο (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw Τεχνική Σχεδίαση + - Insert new default Page Εισαγωγή νέας προεπιλεγμένης Σελίδας @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw Τεχνική Σχεδίαση + - Insert View in Page Εισαγωγή Προβολής στην Σελίδα @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw Τεχνική Σχεδίαση + - Insert Detail View Εισαγωγή Προβολής Λεπτομερειών @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw Τεχνική Σχεδίαση + - Insert Section View in Page Εισαγωγή Προβολής Τομής στην Σελίδα @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Projection Group Εισαγωγή Ομάδας Προβολών - + Insert multiple linked views of drawable object(s) Εισαγωγή πολλαπλών συνδεδεμένων προβολών αντικειμένων προς σχεδίαση + + CmdTechDrawQuadrant + + + TechDraw + Τεχνική Σχεδίαση + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw Τεχνική Σχεδίαση - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw Τεχνική Σχεδίαση - + Insert Spreadsheet view Εισαγωγή προβολής Υπολογιστικού Φύλλου - + Inserts a view of a selected spreadsheet Εισάγει μια προβολή ενός επιλεγμένου υπολογιστικού φύλλου @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw Τεχνική Σχεδίαση - + Insert SVG Symbol Εισαγωγή συμβόλου SVG - + Insert symbol from a svg file Εισαγωγή συμβόλου από αρχείο svg @@ -715,72 +820,77 @@ More functions - + Standard Καθιερωμένο - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Λάθος επιλογή - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Επιλέξτε τουλάχιστον 1 Εξάρτημα Προβολής Σχεδίασης ως Βάση. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Το παράθυρο Αποκοπής και η Προβολή πρέπει να είναι από την ίδια Σελίδα. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Η Προβολή δεν ανήκει σε κάποιο παράθυρο Αποκοπής - + Choose an SVG file to open Επιλέξτε ένα αρχείο SVG για άνοιγμα - + Scalable Vector Graphic Αρχείο Κλιμακωτών Διανυσματικών Γραφικών - - + + Select at least one object. Επιλέξτε τουλάχιστον ένα αντικείμενο. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Επιλέξτε ακριβώς ένα Υπολογιστικό Φύλλο. - + No Drawing View Καμία Προβολή Σχεδίασης - + Open Drawing View before attempting export to SVG. Ανοίξτε την Προβολή Σχεδίασης πριν επιχειρήσετε να κάνετε εξαγωγή σε SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Δεν υπάρχει κανένα τρισδιάστατο αντικείμενο στην επιλογή σας - + There are no 3D Edges or Vertices in your selection Δεν υπάρχουν τρισδιάστατες Ακμές ή Κορυφές στην επιλογή σας - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Εσφαλμένη επιλογή - - + + Select an object first Επιλέξτε πρώτα ένα αντικείμενο - - + + Too many objects selected Επιλέχθηκαν πάρα πολλά αντικείμενα - - + + Create a page first. Δημιουργήστε πρώτα μια σελίδα. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Επιλέξτε ακριβώς 1 σελίδα. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Όλα τα αρχεία (*.*) - + Export Page As PDF Εξαγωγή Σελίδας ως PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Εξαγωγή Σελίδας ως SVG - + FreeCAD SVG Export Εξαγωγή αρχείου FreeCAD SVG - + Show drawing Εμφανίστε σχέδιο - + Toggle KeepUpdated Εναλλαγή Ενημέρωσης της σελίδας @@ -1121,12 +1306,12 @@ Κάντε κλικ για ενημέρωση του κειμένου - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Διαστάσεις - + Arrow Style Τύπος Μορφοποίησης Βέλους @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Μέγεθος γραμματοσειράς διάστασης σε μονάδες - + Dimension arrowhead size in units Μέγεθος αιχμής βέλους διάστασης σε μονάδες - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Επιλογές Γραφικών - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Κυκλικός - + Square Τετράγωνο - + Section Line Style Τύπος Μορφοποίησης Γραμμών Τομής - + Center Line Style Τύπος Μορφοποίησης Κεντρικών Γραμμών - + Matting Style Τύπος Μορφοποίησης Προβολής Λεπτομερειών - + Line type for centerlines Line type for centerlines - - + + NeverShow Να μην Εμφανίζεται ποτέ - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Παύλα - - + + Dot Τελεία - - + + DashDot Παύλα-Τελεία - - + + DashDotDot Παύλα-Τελεία-Τελεία - - + + Solid Στερεό - + Center Line Color Χρώμα Κεντρικών Γραμμών - + Section Line Color Χρώμα Γραμμών Τομής @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Εξαγωγή SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Εξαγωγή σε PDF - + Different orientation Διαφορετικός προσανατολισμός - + The printer uses a different orientation than the drawing. Do you want to continue? Ο εκτυπωτής χρησιμοποιεί διαφορετικό προσανατολισμό από το σχέδιο. Θέλετε να συνεχίσετε; - - + + Different paper size Διαφορετικό μέγεθος χαρτιού - - + + The printer uses a different paper size than the drawing. Do you want to continue? Ο εκτυπωτής χρησιμοποιεί διαφορετικό μέγεθος χαρτιού από το σχέδιο. Θέλετε να συνεχίσετε; - + Opening file failed Αποτυχία ανοίγματος αρχείου - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Αποθήκευση Αρχείου Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Επιλεγμένα: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Βέλος + + + + Dot + Τελεία + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Τιμή: + + + + Circular + Circular + + + + None + Κανένα + + + + Triangle + Τρίγωνο + + + + Inspection + Inspection + + + + Hexagon + Εξάγωνο + + + + Square + Τετράγωνο + + + + Rectangle + Ορθογώνιο + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Στοιχεία + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Χρώμα + + + + Weight + Weight + + + + Style + Τύπος μορφοποίησης + + + + NoLine + NoLine + + + + Solid + Στερεό + + + + Dash + Παύλα + + + + Dot + Τελεία + + + + DashDot + Παύλα-Τελεία + + + + DashDotDot + Παύλα-Τελεία-Τελεία + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + χιλιοστά + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Σημειώστε - - - + + + Dot Τελεία - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Χρώμα - + Weight Weight - + Style Τύπος μορφοποίησης - + NoLine NoLine - + Solid Στερεό - + Dash Παύλα - + DashDot Παύλα-Τελεία - + DashDotDot Παύλα-Τελεία-Τελεία - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Do you want to continue? Τιμή: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm index b60247d332..3fee5ef907 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index 0ac28784be..8351fb4786 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insertar anotación @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Inserte un plano de sección - + Inserts a view of a Section Plane from Arch Workbench Inserta una vista de un plano de sección desde el Entorno de Trabajo Arch @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insertar grupo Clip @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Quitar la vista de ClipGroup - + Remove a View from Clip group Quitar la vista de ClipGroup @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Añadir una Vista a ClipGroup - + Add a View to Clip group Añadir una Vista a ClipGroup - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Inserta un objeto del Entorno de Trabajo Draft - + Insert a View of a Draft Workbench object Insertar una vista de un objeto del Entorno de Trabajo Draft @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Archivo - + Export page as SVG Exportar página como SVG - + Export a page to an SVG file Exportar una página a un archivo SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Archivo - + Export page as DXF Exportar página como DXF - + Export a page to a DXF file Exportar página como archivo DXF - + Save Dxf File Guardar archivo Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + Añadir una línea a una vista CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Vincular una dimensión a geometría 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Inserte una nueva dimensión de ángulo de 3 puntos @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Inserte una nueva dimensión de ángulo @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + Insertar un nuevo globo CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Inserte una nueva cota de diámetro - + Insert a new diameter dimension feature Inserte una nueva función de cota de diámetro @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Inserte una nueva cota horizontal - + Insert a new horizontal distance dimension Inserte una nueva cota de la distancia horizontal @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Inserte una nueva cota vertical - + Insert a new vertical distance dimension Inserte una nueva cota de la distancia vertical @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insertar una nueva dimensión de la longitud @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insertar nueva Página usando Plantilla - + Select a Template File Seleccione un archivo de plantilla - + Template (*.svg *.dxf) Plantilla (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insertar una nueva página por defecto @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insertar vista de página @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insertar vista de detalle @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insertar vista de sección en página @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insertar Grupo de proyección - + Insert multiple linked views of drawable object(s) Insertar varias vistas vinculadas del objeto(s) dibujable + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + Añadir una anotación de texto enriquecido CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insertar vista de hoja de cálculo - + Inserts a view of a selected spreadsheet Inserta una vista de una hoja de cálculo seleccionada @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insertar símbolo SVG - + Insert symbol from a svg file Insertar el símbolo de un archivo svg @@ -555,38 +660,38 @@ Save changes - Save changes + Guardar cambios Close editor - Close editor + Cerrar editor Paragraph formatting - Paragraph formatting + Formato de párrafo Undo (CTRL+Z) - Undo (CTRL+Z) + Deshacer (Ctrl+Z) Undo - Undo + Deshacer Redo - Redo + Rehacer Cut (CTRL+X) - Cut (CTRL+X) + Cortar (Ctrl+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Copiar (Ctrl+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Pegar (Ctrl+V) Paste - Paste + Pegar Link (CTRL+L) - Link (CTRL+L) + Enlace (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Cursiva (Ctrl+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Subrayado (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Tachado Strike Out - Strike Out + Tachar Bullet list (CTRL+-) - Bullet list (CTRL+-) + Lista de viñetas (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Lista ordenada (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Disminuir sangría (CTRL+,) Decrease indentation - Decrease indentation + Disminuir sangría Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Aumentar sangría (CTRL+.) Increase indentation - Increase indentation + Aumentar sangría Text foreground color - Text foreground color + Color de frente de texto Text background color - Text background color + Color de fondo de texto @@ -712,188 +817,201 @@ More functions - More functions + Más funciones - + Standard Estándar - + Heading 1 - Heading 1 + Cabecera 1 - + Heading 2 - Heading 2 + Cabecera 2 - + Heading 3 - Heading 3 + Cabecera 3 - + Heading 4 - Heading 4 + Cabecera 4 - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Eliminar formato de caracteres + + + + Remove all formatting + Quitar todo formato + + + Edit document source - Edit document source + Editar el documento fuente - + Document source - Document source + Origen del Documento - + Create a link - Create a link + Crear un Enlace - + Link URL: - Link URL: + URL de enlace: - + Select an image - Select an image + Seleccionar una imagen - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todo (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Selección incorrecta - - + + No Shapes or Groups in this selection No hay formas o grupos en esta selección - - + + Select at least 1 DrawViewPart object as Base. Seleccione al menos 1 objeto de DrawViewPart como Base. - + Select one Clip group and one View. - Select one Clip group and one View. + Seleccione 1 grupo de recorte y 1 Vista. - + Select exactly one View to add to group. Seleccione exactamente una vista para añadir al grupo. - + Select exactly one Clip group. Seleccione exactamente un único grupo de Clip. - + Clip and View must be from same Page. Clip y vista deben ser de la misma página. - + Select exactly one View to remove from Group. Seleccione exactamente una vista para eliminar del grupo. - + View does not belong to a Clip La vista no pertenece a un Clip - + Choose an SVG file to open Seleccionar un archivo SVG para abrir - + Scalable Vector Graphic Gráfico vectorial escalable - - + + Select at least one object. Seleccione al menos un objeto. - + There is no Section Plane in selection. No hay ningún plano de la sección en la selección. - + Select exactly one Spreadsheet object. Seleccione exactamente un objeto de hoja de cálculo. - + No Drawing View Sin vistas de dibujo - + Open Drawing View before attempting export to SVG. Vista del dibujo abierta antes de intentar exportar a SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Advertencia de selección + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - El borde seleccionado es una BSpline. El radio será aproximado. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - El borde seleccionado es una BSpline. El diámetro será aproximado. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Necesita dos bordes rectos para hacer una cota de ángulo - + Need three points to make a 3 point Angle Dimension Necesita tres puntos para hacer una cota de ángulo de 3 puntos - + There is no 3D object in your selection No hay ningún objeto 3D en su selección - + There are no 3D Edges or Vertices in your selection No hay bordes o vértices 3D en su selección - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Selección incorrecta - - + + Select an object first Seleccione un objeto en primer lugar - - + + Too many objects selected Demasiados objetos seleccionados - - + + Create a page first. Cree una página de dibujo primero. - - + + No View of a Part in selection. Sin vista de un objeto Part en la selección. - + No Feature with Shape in selection. No hay ninguna operación asociada a una Forma en la selección. - - + + + + + + + + Task In Progress - Task In Progress + Tarea en progreso - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Cerrar diálogo de tareas activo e inténtelo de nuevo. - - + + + + + Selection Error - Selection Error + Error de selección - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + No se puede adjuntar directriz. No se ha seleccionado la vista base. - + + You must select a base View for the line. - You must select a base View for the line. + Debe seleccionar una vista base para la línea. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Seleccione 1 página exactamente. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos los archivos (*.*) - + Export Page As PDF Exportar página como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página como SVG - + FreeCAD SVG Export Exportación de SVG de FreeCAD - + Show drawing Mostrar dibujo - + Toggle KeepUpdated Activar KeepUpdated @@ -1121,24 +1306,34 @@ Haga clic para actualizar el texto - + New Leader Line - New Leader Line + Nueva línea directriz - + Edit Leader Line - Edit Leader Line + Editar línea directriz Rich text creator - Rich text creator + Creador de texto enriquecido - + Rich text editor - Rich text editor + Editor de texto enriquecido + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Dimensiones - + Arrow Style Estilo de flecha @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Añadir unidad al texto de cota Dimension text color - Dimension text color + Color de texto de cota Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Caractere a usar para indicar el diámetro de la cota Use system setting for decimal places. - Use system setting for decimal places. + Usar el ajuste del sistema para lugares decimales. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Número de lugares decimales si no se utilizan decimales globales - + Dimension font size in units Tamaño cota de fuente en unidades - + Dimension arrowhead size in units Tamaño cota de punta de flecha en unidades - + Default Format - Default Format + Formato predeterminado - + Custom format for Dimension text - Custom format for Dimension text + Formato personalizado para el texto de la cota - + Decorations Decoraciones - + Color for centerlines - Color for centerlines + Color para las líneas de centro - + Adjusts size of vertices in drawing Ajusta tamaño de vértices en el dibujo - + Vertex Scale Escala de vértices - + Round or Square outline in Detail view - Round or Square outline in Detail view + Contorno redondo o cuadrado en vista de detalle - + Round Redondo - + Square Cuadrado - + Section Line Style Selección estilo de línea - + Center Line Style Centro estilo de línea - + Matting Style Estilo de Tapete - + Line type for centerlines - Line type for centerlines + Tipo de línea para las líneas de centro - - + + NeverShow No Mostrar - + Line color for sectionlines - Line color for sectionlines + Color de línea para las líneas de sección - + Line Group Name Nombre de grupo de línea - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Nombre de entrada en el archivo CSV de LineGroup - + Vertex Color Color de vértices - + Vertex display color - Vertex display color + Color de visualización de vértices - - + + Dash Tablero - - + + Dot Punto - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Sólido - + Center Line Color Color de la línea central - + Section Line Color Color de la sección de la línea @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exportar SVG - + Toggle &Keep Updated Alternar y mantener actualizados - + Toggle &Frames Alternar Marcos - + Export DXF - Export DXF + Exportar DXF - + Export PDF Exportar PDF - + Different orientation Orientación diferente de la hoja - + The printer uses a different orientation than the drawing. Do you want to continue? La impresora utiliza una orientación de papel distinta a la del dibujo. ¿Desea continuar? - - + + Different paper size Tamaño de papel diferente - - + + The printer uses a different paper size than the drawing. Do you want to continue? La impresora usa un tamaño de papel distinto al del dibujo. ¿Desea continuar? - + Opening file failed No se pudo abrir el archivo - + Can not open file %1 for writing. No se puede abrir el archivo %1 para la escritura. - + Save Dxf File Guardar archivo Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionado: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Página de dibujo: - + exported from FreeCAD document: exportado desde documento de FreeCAD: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Flecha + + + + Dot + Punto + + + + Start Symbol + Símbolo de inicio + + + + Symbol: + Symbol: + + + + Value: + Valor: + + + + Circular + Circular + + + + None + Ninguno + + + + Triangle + Triángulo + + + + Inspection + Inspection + + + + Hexagon + Hexágono + + + + Square + Cuadrado + + + + Rectangle + Rectángulo + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Vista base + + + + Elements + Elementos + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Color + + + + Weight + Peso + + + + Style + Estilo + + + + NoLine + Sin línea + + + + Solid + Sólido + + + + Dash + Tablero + + + + Dot + Punto + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Vista base + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Clic izquierdo para establecer un punto + + + + In progress edit abandoned. Start over. + En proceso de edición abandonado. Comenzar de nuevo. + + TechDrawGui::TaskGeomHatch @@ -1799,135 +2213,141 @@ Do you want to continue? Leader Line - Leader Line + Línea directriz Base View - Base View + Vista base - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Símbolo de inicio - - + + No Symbol - No Symbol + Ningún símbolo - - + + Filled Triangle - Filled Triangle + Triángulo relleno - - + + Open Triangle - Open Triangle + Triángulo abierto - - + + Tick Tick - - - + + + Dot Punto - - + + Open Circle - Open Circle + Círculo abierto - + + + Fork + Fork + + + End Symbol - End Symbol + Símbolo final - + Color Color - + Weight - Weight + Peso - + Style Estilo - + NoLine - NoLine + Sin línea - + Solid Sólido - + Dash Tablero - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line - Pick a starting point for leader line + Escoge un punto de partida para la línea directriz - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Haga clic y arrastre marcadores para ajustar la línea directriz - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Clic izquierdo para establecer un punto - + Press OK or Cancel to continue - Press OK or Cancel to continue + Presiona OK o Cancelar para continuar - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + En proceso de edición abandonado. Comenzar de nuevo. @@ -2152,27 +2572,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + Bloque de anotación de texto enriquecido Max Width - Max Width + Anchura máx Base Feature - Base Feature + Operación base Show Frame - Show Frame + Mostrar marco Start Rich Text Editor - Start Rich Text Editor + Iniciar Editor de Texto Enriquecido @@ -2288,4 +2708,28 @@ Do you want to continue? Valor: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm index 11dc66b067..527151952f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index f0e380d6f5..9804aa13e1 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Txertatu oharpena @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Txertatu sekzio-planoa - + Inserts a view of a Section Plane from Arch Workbench Arch lan-mahaiko sekzio-plano baten bista bat txertatzen du @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Txertatu ebaketa-taldea @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Kendu bista ebaketa-taldetik - + Remove a View from Clip group Kendu bista bat ebaketa-taldetik @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Gehitu bista bat ebaketa-taldeari - + Add a View to Clip group Gehitu bista bat ebaketa-taldeari - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Txertatu DraftWB objektu bat - + Insert a View of a Draft Workbench object Txertatu zirriborro lan-mahai objektu baten bista bat @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fitxategia - + Export page as SVG Esportatu orrialdea SVG gisa - + Export a page to an SVG file Esportatu orri bat SVG fitxategi batera @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fitxategia - + Export page as DXF Esportatu orrialdea DXF gisa - + Export a page to a DXF file Esportatu orri bat DXF fitxategi batera - + Save Dxf File Gorde DXF fitxategia - + Dxf (*.dxf) DXF (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + Gehitu lerro bat bista bati CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Estekatu kota bat 3D geometria batekin - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Txertatu 3 puntuko angelu-kota berri bat @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Txertatu beste angelu-kota bat @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + Txertatu bunbuilo berri bat CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Txertatu beste diametro-kota bat - + Insert a new diameter dimension feature Txertatu diametro-kotako beste ezaugarri bat @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Txertatu beste kota horizontal bat - + Insert a new horizontal distance dimension Txertatu distantzia horizontaleko beste kota bat @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Txertatu beste kota bertikal bat - + Insert a new vertical distance dimension Txertatu distantzia bertikaleko beste kota bat @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Txertatu beste luzera-kota bat @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Txertatu beste orri bat txantiloi bat erabilita - + Select a Template File Hautatu txantiloi-fitxategi bat - + Template (*.svg *.dxf) Txantiloia (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Txertatu beste orri lehenetsi bat @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Txertatu bista orrian @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Txertatu xehetasun-bista @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Txertatu sekzio-bista orrian @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Txertatu proiekzio-taldea - + Insert multiple linked views of drawable object(s) Txertatu objektu marrazgai(ar)en bista estekatu anitz + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + Gehitu testu aberatseko oharpen bat CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Txertatu kalkulu-orriaren bista - + Inserts a view of a selected spreadsheet Hautatutako kalkulu-orri baten bista bat txertatzen du @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Txertatu SVG ikurra - + Insert symbol from a svg file Txertatu ikurra SVG fitxategi batetik @@ -555,38 +660,38 @@ Save changes - Save changes + Gorde aldaketak Close editor - Close editor + Itxi editorea Paragraph formatting - Paragraph formatting + Paragrafoaren formatua Undo (CTRL+Z) - Undo (CTRL+Z) + Desegin (Ctrl+Z) Undo - Undo + Desegin Redo - Redo + Berregin Cut (CTRL+X) - Cut (CTRL+X) + Moztu (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Kopiatu (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Itsatsi (CTRL+V) Paste - Paste + Itsatsi Link (CTRL+L) - Link (CTRL+L) + Esteka (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Etzana (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Azpimarra (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Marratua Strike Out - Strike Out + Marratua Bullet list (CTRL+-) - Bullet list (CTRL+-) + Buletdun zerrenda (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Zerrenda ordenatua (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Txikitu koskatzea (CTRL+,) Decrease indentation - Decrease indentation + Txikitu koskatzea Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Handitu koskatzea (CTRL+.) Increase indentation - Increase indentation + Handitu koskatzea Text foreground color - Text foreground color + Testuaren aurreko planoaren kolorea Text background color - Text background color + Testuaren atzeko planoaren kolorea @@ -706,194 +811,207 @@ Font size - Letra-tipoaren tamaina + Letra-tamaina More functions - More functions + Funtzio gehiago - + Standard Estandarra - + Heading 1 - Heading 1 + 1. izenburua - + Heading 2 - Heading 2 + 2. izenburua - + Heading 3 - Heading 3 + 3. izenburua - + Heading 4 - Heading 4 + 4. izenburua - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Kendu karaktere-formatua + + + + Remove all formatting + Kendu formatu guztia + + + Edit document source - Edit document source + Editatu dokumentu-iturburua - + Document source - Document source + Dokumentu-iturburua - + Create a link - Create a link + Sortu esteka bat - + Link URL: - Link URL: + Estekaren URLa: - + Select an image - Select an image + Hautatu irudi bat - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Denak (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Hautapen okerra - - + + No Shapes or Groups in this selection Ez dago formarik edo talderik hautapen honetan - - + + Select at least 1 DrawViewPart object as Base. Hautatu gutxienez marrazki-bistaren pieza bat oinarri gisa. - + Select one Clip group and one View. - Select one Clip group and one View. + Hautatu ebaketa talde bat eta bista bat. - + Select exactly one View to add to group. Hautatu bista bakar bat taldeari gehitzeko. - + Select exactly one Clip group. Hautatu ebaketa-talde bakar bat. - + Clip and View must be from same Page. Ebaketak eta bistak orrialde berekoak izan behar dute. - + Select exactly one View to remove from Group. Hautatu bista bakar bat taldetik kentzeko. - + View does not belong to a Clip Bista ez da ebaketa batekoa - + Choose an SVG file to open Hautatu SVG fitxategi bat irekitzeko - + Scalable Vector Graphic Grafiko bektorial eskalagarria - - + + Select at least one object. Hautatu objektu bat gutxienez. - + There is no Section Plane in selection. Ez dago sekzio-planorik hautapenean. - + Select exactly one Spreadsheet object. Hautatu kalkulu-orri objektu zehatz bat. - + No Drawing View Ez dago marrazki-bistarik - + Open Drawing View before attempting export to SVG. Ireki marrazki-bista SVG formatura esportatzen saiatu baino lehen. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Hautapen-abisua + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Hautatutako ertza BSpline bat da. Erradioa gutxi gorabeherakoa izango da. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Hautatutako ertza BSpline bat da. Diametroa gutxi gorabeherakoa izango da. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Bi ertz zuzen behar dira angelu-kota bat egiteko - + Need three points to make a 3 point Angle Dimension Hiru puntu behar dira 3 puntuko angelu-kota bat egiteko - + There is no 3D object in your selection Ez dago 3D objekturik zure hautapenean - + There are no 3D Edges or Vertices in your selection Ez dago 3D ertzik edo erpinik zure hautapenean - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Hautapen okerra - - + + Select an object first Hautatu objektu bat - - + + Too many objects selected Objektu gehiegi hautatuta - - + + Create a page first. Lehenengo, sortu orrialde bat. - - + + No View of a Part in selection. Ez dago piezaren bistarik hautapenean. - + No Feature with Shape in selection. Ez dago formarik duen elementurik hautapenean. - - + + + + + + + + Task In Progress - Task In Progress + Zeregina abian - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Itxi zeregin aktiboaren elkarrizketa-koadroa eta saiatu berriro. - - + + + + + Selection Error - Selection Error + Hautapen-errorea - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Ezin da gida-marra erantsi. Ez da oinarrizko bistarik hautatu. - + + You must select a base View for the line. - You must select a base View for the line. + Oinarrizko bista bat hautatu behar duzu lerrorako. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Hautatu orrialde bakar bat. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Fitxategi guztiak (*.*) - + Export Page As PDF Esportatu orrialdea PDF gisa - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Esportatu orrialdea SVG gisa - + FreeCAD SVG Export FreeCAD SVG esportazioa - + Show drawing Erakutsi marrazkia - + Toggle KeepUpdated Txandakatu eguneratuta mantentzea @@ -1121,24 +1306,34 @@ Egin klik testua eguneratzeko - + New Leader Line - New Leader Line + Gida-marra berria - + Edit Leader Line - Edit Leader Line + Editatu gida-marra Rich text creator - Rich text creator + Testu aberatsaren sortzailea - + Rich text editor - Rich text editor + Testu aberatsaren editorea + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Kotak - + Arrow Style Gezi-estiloa @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Erantsi unitatea kota-testuari Dimension text color - Dimension text color + Kota-testuaren kolorea Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Diametroaren kota adierazteko erabiliko den karakterea Use system setting for decimal places. - Use system setting for decimal places. + Erabili sistemaren ezarpena dezimaletarako. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Dezimal globalak erabiltzen ez badira erabiliko den dezimal kopurua - + Dimension font size in units - Kotaren letra-tipoaren tamaina unitatetan + Kotaren letra-tamaina unitatetan - + Dimension arrowhead size in units Kotaren gezi-buruaren tamaina unitatetan - + Default Format - Default Format + Formatu lehenetsia - + Custom format for Dimension text - Custom format for Dimension text + Formatu pertsonalizatua kota-testurako - + Decorations Apaingarriak - + Color for centerlines - Color for centerlines + Erdiko lerroen kolorea - + Adjusts size of vertices in drawing Erpinen tamaina egokitzen du marrazkian - + Vertex Scale Erpin-eskala - + Round or Square outline in Detail view - Round or Square outline in Detail view + Eskema biribildua edo karratua xehetasunen bistan - + Round Biribildu - + Square Laukia - + Section Line Style Sekzio-lerroaren estiloa - + Center Line Style Erdiko lerroaren estiloa - + Matting Style Ehundura estiloa - + Line type for centerlines - Line type for centerlines + Erdiko lerroen lerro mota - - + + NeverShow Ez erakutsi - + Line color for sectionlines - Line color for sectionlines + Sekzio-lerroen kolorea - + Line Group Name Lerro taldearen izena - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Sarreraren izena LineGroup CSV fitxategian - + Vertex Color Erpin-kolorea - + Vertex display color - Vertex display color + Erpinak bistaratzeko kolorea - - + + Dash Marra - - + + Dot Puntua - - + + DashDot MarraPuntua - - + + DashDotDot MarraPuntuaPuntua - - + + Solid Solidoa - + Center Line Color Erdiko lerroaren kolorea - + Section Line Color Sekzio-lerroaren kolorea @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Esportatu SVGa - + Toggle &Keep Updated Txandakatu &eguneratuta mantentzea - + Toggle &Frames Txandakatu &markoak - + Export DXF - Export DXF + Esportatu DXFa - + Export PDF Esportatu PDFa - + Different orientation Orientazio desberdina - + The printer uses a different orientation than the drawing. Do you want to continue? Inprimagailuak eta marrazkiak orientazio desberdina dute. Jarraitu nahi duzu? - - + + Different paper size Paper-tamaina desberdina - - + + The printer uses a different paper size than the drawing. Do you want to continue? Inprimagailuak eta marrazkiak paper-tamaina desberdina dute. Jarraitu nahi duzu? - + Opening file failed Fitxategia irekitzeak huts egin du - + Can not open file %1 for writing. Ezin da %1 fitxategia ireki hura idazteko. - + Save Dxf File Gorde DXF fitxategia - + Dxf (*.dxf) DXF (*.dxf) - + Selected: Hautatua: @@ -1721,16 +1921,230 @@ Jarraitu nahi duzu? TechDrawGui::QGVPage - + Drawing page: Marrazte-orria: - + exported from FreeCAD document: FreeCAD dokumentutik esportatua: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Gezia + + + + Dot + Puntua + + + + Start Symbol + Hasierako ikurra + + + + Symbol: + Symbol: + + + + Value: + Balioa: + + + + Circular + Circular + + + + None + Bat ere ez + + + + Triangle + Triangelua + + + + Inspection + Inspection + + + + Hexagon + Hexagonoa + + + + Square + Laukia + + + + Rectangle + Laukizuzena + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Oinarrizko bista + + + + Elements + Elementuak + + + + Vertical + Bertikala + + + + Horizontal + Horizontala + + + + Aligned + Aligned + + + + Color + Kolorea + + + + Weight + Pisua + + + + Style + Estiloa + + + + NoLine + Lerrorik ez + + + + Solid + Solidoa + + + + Dash + Marra + + + + Dot + Puntua + + + + DashDot + MarraPuntua + + + + DashDotDot + MarraPuntuaPuntua + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Oinarrizko bista + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Ezkerreko klika puntu bat ezartzeko + + + + In progress edit abandoned. Start over. + Abian dagoen edizioa utzi da. Hasi berriro. + + TechDrawGui::TaskGeomHatch @@ -1799,135 +2213,141 @@ Jarraitu nahi duzu? Leader Line - Leader Line + Gida-marra Base View - Base View + Oinarrizko bista - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Hasierako ikurra - - + + No Symbol - No Symbol + Ikurrik ez - - + + Filled Triangle - Filled Triangle + Triangelu betea - - + + Open Triangle - Open Triangle + Triangelu irekia - - + + Tick Tika - - - + + + Dot Puntua - - + + Open Circle - Open Circle + Zirkulu irekia - + + + Fork + Fork + + + End Symbol - End Symbol + Amaierako ikurra - + Color Kolorea - + Weight - Weight + Pisua - + Style Estiloa - + NoLine - NoLine + Lerrorik ez - + Solid Solidoa - + Dash Marra - + DashDot MarraPuntua - + DashDotDot MarraPuntuaPuntua - - + + Pick a starting point for leader line - Pick a starting point for leader line + Aukeratu gida-marraren hasierako puntua - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Klikatu eta arrastatu markatzaileak gida-marra doitzeko - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Ezkerreko klika puntu bat ezartzeko - + Press OK or Cancel to continue - Press OK or Cancel to continue + Sakatu 'Ados' edo 'Utzi' jarraitzeko - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Abian dagoen edizioa utzi da. Hasi berriro. @@ -2152,27 +2572,27 @@ Jarraitu nahi duzu? Rich Text Annotation Block - Rich Text Annotation Block + Testu aberatseko oharpenaren blokea Max Width - Max Width + Zabalera maximoa Base Feature - Base Feature + Oinarri-elementua Show Frame - Show Frame + Erakutsi markoa Start Rich Text Editor - Start Rich Text Editor + Hasi testu aberatsaren editorea @@ -2288,4 +2708,28 @@ Jarraitu nahi duzu? Balioa: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm index 1004a8bea2..e1b12b8cd3 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index 67440f33af..4665070b80 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Tiedosto - + Export page as SVG Export page as SVG - + Export a page to an SVG file Vie sivu SVG-tiedostoon @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Tiedosto - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Standardi - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Väärä valinta - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Valitse avattava SVG-tiedosto - + Scalable Vector Graphic Skaalautuva vektorigrafiikka - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Valitse täsmälleen yksi kohde. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Luo sivu ensin. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Kaikki tiedostot (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Näytä piirustus - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Mitat - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Neliö - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Piste - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Monitahokas - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Vienti PDF - + Different orientation Erilainen sivun suunta - + The printer uses a different orientation than the drawing. Do you want to continue? Tulostin käyttää eri paperisuuntaa kuin piirros. Haluatko jatkaa? - - + + Different paper size Erilainen paperikoko - - + + The printer uses a different paper size than the drawing. Do you want to continue? Tulostin käyttää eri paperikokoa kuin piirros. Haluatko jatkaa? - + Opening file failed Tiedoston avaaminen epäonnistui - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Valittu: @@ -1721,16 +1921,230 @@ Haluatko jatkaa? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Nuoli + + + + Dot + Piste + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Ei mitään + + + + Triangle + Kolmio + + + + Inspection + Inspection + + + + Hexagon + Kuusikulmio + + + + Square + Neliö + + + + Rectangle + Suorakulmio + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Osat + + + + Vertical + Pystysuora + + + + Horizontal + Vaakasuora + + + + Aligned + Aligned + + + + Color + Väri + + + + Weight + Weight + + + + Style + Tyyli + + + + NoLine + NoLine + + + + Solid + Monitahokas + + + + Dash + Dash + + + + Dot + Piste + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Haluatko jatkaa? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Piste - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Väri - + Weight Weight - + Style Tyyli - + NoLine NoLine - + Solid Monitahokas - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Haluatko jatkaa? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm index d5c2a747ab..74c2ed3d3d 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts index ddd432a5c5..e2a7d57701 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File File - + Export page as SVG I-luwas pahina ng SVG - + Export a page to an SVG file Nag export ng isang page sa SVG file @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File File - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Mag-ugnay ng dimensyon sa 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Magsingit ng isang bagong sukat ng anggulo @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Magsingit ng isang bagong patindig na dimensyon ng distansya @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Magsingit ng isang bagong sukat ng haba @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Pumili ng isang File ng Template - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Ipasok ang Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Pamantayan - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Maling pagpili - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Pumili ng kahit isang DrawViewPart na bagay bilang Pundasyon. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip at tanaw ay dapat na mula sa parehong Pahina. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Ang pagtingin ay hindi isang Clip - + Choose an SVG file to open Pumili ng SVG file na bubuksan - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Pumili ng hindi bababa sa isang bagay. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Pumili ng isang eksaktong Spreadsheet object. - + No Drawing View Walang Guhit na Pagtingin - + Open Drawing View before attempting export to SVG. Buksan ang Drawing tanaw bago tangkaing i-luwas sa SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Walang bagay sa 3D sa iyong pinili - + There are no 3D Edges or Vertices in your selection Walang 3D hangganan o Vertices sa iyong pagpipilian - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Maling pagpili - - + + Select an object first Pumili muna ng isang bagay - - + + Too many objects selected Napiling napakaraming mga bagay - - + + Create a page first. Lumikha muna ng page. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Pumili ng eksaktong 1 na pahina. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF I-luwas ang Pahina Bilang PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG I-luwas pahina ng SVG - + FreeCAD SVG Export FreeCAD SVG luwas - + Show drawing Ipakita ang drawing - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Mga dimensyon - + Arrow Style Estillo ng pana @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Mga dekorasyon - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Bilugan - + Square Kuwadrado - + Section Line Style Estilo ng linya ng seksyon - + Center Line Style Estilo ng linya ng sentro - + Matting Style Estilo ng matting - + Line type for centerlines Line type for centerlines - - + + NeverShow HwagIpakita - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Dot - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Solid - + Center Line Color Kulay ng linya ng sentro - + Section Line Color Kulay ng linya ng seksyon @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF I-export ang PDF - + Different orientation Ibang orientasyon - + The printer uses a different orientation than the drawing. Do you want to continue? Ang printer ay gumagamit ng ibang orientasyon kaysa sa drawing. Gusto mong magpatuloy? - - + + Different paper size Ibang laki ng papel - - + + The printer uses a different paper size than the drawing. Do you want to continue? Ang printer ay gumagamit ng ibang sukat ng papel kaysa sa drawing. Gusto mong magpatuloy? - + Opening file failed Hindi nagtagumpay ang pagbubukas ng file - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Hinirang: @@ -1721,16 +1921,231 @@ Gusto mong magpatuloy? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Palaso + + + + Dot + Dot + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Halaga: + + + + Circular + Circular + + + + None + Wala + + + + Triangle + Tatlong pánulukan + + + + Inspection + Inspection + + + + Hexagon + Hexagon + + + + Square + Kuwadrado + + + + Rectangle + +Taluhaba + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elemento + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Kolor + + + + Weight + Weight + + + + Style + Estilo + + + + NoLine + NoLine + + + + Solid + Solid + + + + Dash + Dash + + + + Dot + Dot + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + Exis + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2223,130 @@ Gusto mong magpatuloy? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Dot - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Kolor - + Weight Weight - + Style Estilo - + NoLine NoLine - + Solid Solid - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2709,28 @@ Gusto mong magpatuloy? Halaga: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm index ec38260a54..8c0a7b92a4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 34c0c549c3..0588698503 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insérer une annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insérer un plan de section - + Inserts a view of a Section Plane from Arch Workbench Insère une vue d'un plan de section depuis l'atelier Arch @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insérer une fenêtre de rognage @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Supprimer la vue de la fenêtre de rognage - + Remove a View from Clip group Supprimer une vue de la fenêtre de rognage @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Ajouter une vue au groupe Clip - + Add a View to Clip group Ajouter une vue à la fenêtre de rognage - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insère un objet depuis l'atelier Draft - + Insert a View of a Draft Workbench object Insére une vue d’un objet de l'atelier Draft @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fichier - + Export page as SVG Exporter la page au format SVG - + Export a page to an SVG file Exporter une page vers un fichier SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fichier - + Export page as DXF Exporter la page au format DXF - + Export a page to a DXF file Exporter une page vers un fichier DXF - + Save Dxf File Enregistrez le fichier Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + Ajouter une ligne à une vue CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Lier une cote à une géométrie 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insérer une nouvelle cote angulaire avec trois points @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insérer une nouvelle cote angulaire @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + Insérer une nouvelle bulle CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insérer une nouvelle cote diamétrale - + Insert a new diameter dimension feature Insérer une nouvelle cote diamétrale @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insérer une nouvelle cote horizontale - + Insert a new horizontal distance dimension Insérer une nouvelle cote horizontale @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insérer une nouvelle cote verticale - + Insert a new vertical distance dimension Insérer une nouvelle cote verticale @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insérer une nouvelle cote linéaire @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insérer une nouvelle page à partir d'un modèle - + Select a Template File Sélectionner un fichier modèle - + Template (*.svg *.dxf) Modèle (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insérer une nouvelle page par défaut @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insérer une vue dans la page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insérer une vue de détail @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insérer une vue en coupe dans la page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insérer un groupe de projections - + Insert multiple linked views of drawable object(s) Insérer plusieurs vues liées d'objets + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + Ajouter une annotation en texte enrichi CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insérer une vue de feuille de calcul - + Inserts a view of a selected spreadsheet Insère une vue d'une feuille de calcul sélectionnée @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insérer symbole SVG - + Insert symbol from a svg file Insérer un symbole à partir d’un fichier svg @@ -555,38 +660,38 @@ Save changes - Save changes + Enregistrer les modifications Close editor - Close editor + Fermer l’éditeur Paragraph formatting - Paragraph formatting + Formatage du paragraphe Undo (CTRL+Z) - Undo (CTRL+Z) + Annuler (Ctrl + Z) Undo - Undo + Annuler Redo - Redo + Rétablir Cut (CTRL+X) - Cut (CTRL+X) + Couper (Ctrl + X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Copier (Ctrl + C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Coller (Ctrl + V) Paste - Paste + Coller Link (CTRL+L) - Link (CTRL+L) + Lien (Ctrl + L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Italique (Ctrl + I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Souligné (Ctrl + U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Biffé Strike Out - Strike Out + Barré Bullet list (CTRL+-) - Bullet list (CTRL+-) + Liste à puces (Ctrl + -) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Liste ordonnée (Ctrl + =) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Réduire l'indentation (CTRL+,) Decrease indentation - Decrease indentation + Réduire l'indentation Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Augmenter l'indentation (CTRL+.) Increase indentation - Increase indentation + Augmenter l'indentation Text foreground color - Text foreground color + Couleur de premier plan du texte Text background color - Text background color + Couleur d'arrière-plan du texte @@ -712,189 +817,202 @@ More functions - More functions + Plus de fonctions - + Standard Standard - + Heading 1 - Heading 1 + Titre 1 - + Heading 2 - Heading 2 + Titre 2 - + Heading 3 - Heading 3 + Titre 3 - + Heading 4 - Heading 4 + Titre 4 - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Supprimer le formatage de caractères + + + + Remove all formatting + Supprimer tout le formatage + + + Edit document source - Edit document source + Éditer la source du document - + Document source - Document source + Source du document - + Create a link - Create a link + Créer un lien - + Link URL: - Link URL: + URL du lien : - + Select an image - Select an image + Sélectionner une image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tous (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Sélection invalide - - + + No Shapes or Groups in this selection Aucune forme ou groupe dans cette sélection - - + + Select at least 1 DrawViewPart object as Base. Sélectionnez au moins 1 objet DrawViewPart comme base. - + Select one Clip group and one View. - Select one Clip group and one View. + Sélectionnez un groupe de rognage et une vue. - + Select exactly one View to add to group. Sélectionnez exactement une vue à ajouter au groupe. - + Select exactly one Clip group. Sélectionner seulement un groupe de rognage . - + Clip and View must be from same Page. La fenêtre de rognage et la vue doivent être sur la même page. - + Select exactly one View to remove from Group. Sélectionnez exactement une vue à enlever du groupe. - + View does not belong to a Clip La vue n'appartient pas à une fenêtre de rognage - + Choose an SVG file to open Choisir un fichier SVG à ouvrir - + Scalable Vector Graphic Graphique Vectoriel Adaptable (Svg) - - + + Select at least one object. Sélectionner au moins un objet. - + There is no Section Plane in selection. Il n’y a pas de plan de section dans la sélection. - + Select exactly one Spreadsheet object. Sélectionner un seul objet Spreadsheet. - + No Drawing View Aucune vue de dessin - + Open Drawing View before attempting export to SVG. Ouvrir la vue de dessin avant d’essayer d’exporter vers SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -907,50 +1025,70 @@ - - Selection Warning - Avertissement de sélection + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - L'arête sélectionnée est une B-spline. Le rayon sera approximatif. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - L'arête sélectionnée est une B-spline. Le diamètre sera approximatif. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Deux arêtes droites sont requises pour créer une cote angulaire - + Need three points to make a 3 point Angle Dimension Trois points sont requis pour créer une cote angulaire à 3 points - + There is no 3D object in your selection Pas d'objet 3D sélectionné - + There are no 3D Edges or Vertices in your selection Il n’y a aucune arête ou sommet 3D dans votre sélection - - - - - - - - + + + + + + + + @@ -958,61 +1096,108 @@ Sélection non valide - - + + Select an object first Sélectionnez d’abord un objet - - + + Too many objects selected Trop d'éléments sélectionnés - - + + Create a page first. Créez d'abord une page. - - + + No View of a Part in selection. Aucune vue d'une pièce dans la sélection. - + No Feature with Shape in selection. Aucune objet avec une forme dans la sélection. - - + + + + + + + + Task In Progress - Task In Progress + Tâche en cours - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Fermer la boîte de dialogue des tâches actives et réessayer. - - + + + + + Selection Error - Selection Error + Erreur de sélection - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Impossible d'attacher la référence. Aucune vue de base sélectionnée. - + + You must select a base View for the line. - You must select a base View for the line. + Vous devez sélectionner une vue de base pour la ligne. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1076,43 +1261,43 @@ Sélectionnez une seule page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tous les fichiers (*.*) - + Export Page As PDF Exporter la page au format PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporter la page au format SVG - + FreeCAD SVG Export Export SVG - + Show drawing Afficher la mise en plan - + Toggle KeepUpdated Activer/désactiver la mise à jour @@ -1122,24 +1307,34 @@ Cliquez pour mettre à jour le texte - + New Leader Line - New Leader Line + Nouvelle ligne de référence - + Edit Leader Line - Edit Leader Line + Modifier la ligne de référence Rich text creator - Rich text creator + Créateur de texte enrichi - + Rich text editor - Rich text editor + Éditeur de texte enrichi + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1150,7 +1345,7 @@ Dimensions - + Arrow Style Style de flèches @@ -1232,171 +1427,176 @@ Append unit to Dimension text - Append unit to Dimension text + Ajouter l’unité au texte de cotation Dimension text color - Dimension text color + Couleur du texte de cotation Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Caractère à utiliser pour indiquer une cote de diamètre Use system setting for decimal places. - Use system setting for decimal places. + Utiliser les réglages du système pour le nombre de décimales. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Nombre de décimales si le Nombre global de décimal n’est pas utilisé - + Dimension font size in units Taille de police des cotes, avec unité - + Dimension arrowhead size in units Taille de flèche des cotes, avec unité - + Default Format - Default Format + Format par défaut - + Custom format for Dimension text - Custom format for Dimension text + Format personnalisé pour le texte de cotation - + Decorations Décorations - + Color for centerlines - Color for centerlines + Couleur pour les lignes d’axe - + Adjusts size of vertices in drawing Ajuste la taille des sommets dans le dessin - + Vertex Scale Taille des sommets - + Round or Square outline in Detail view - Round or Square outline in Detail view + Contour rond ou rectangulaire pour la vue de détail - + Round Arrondi - + Square Carré - + Section Line Style Style de trait des vues de coupe - + Center Line Style Style de trait des lignes d'axe - + Matting Style Cadrage vue de détail - + Line type for centerlines - Line type for centerlines + Type de ligne pour les lignes d’axe - - + + NeverShow Toujours cacher - + Line color for sectionlines - Line color for sectionlines + Couleur de ligne pour les lignes de coupe - + Line Group Name Nom du groupe de lignes - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Nom de l’entrée dans le fichier CSV LineGroup - + Vertex Color Couleur des points - + Vertex display color - Vertex display color + Couleur d’affichage des Sommets - - + + Dash Tiret - - + + Dot Point - - + + DashDot Tiret point - - + + DashDotDot Tiret point point - - + + Solid Solide - + Center Line Color Couleur des lignes d'axe - + Section Line Color Couleur de trait des coupes @@ -1643,76 +1843,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exporter SVG - + Toggle &Keep Updated Activer/désactiver la &mise à jour - + Toggle &Frames Activer/désactiver les &cadres - + Export DXF - Export DXF + Exporter en DXF - + Export PDF Exporter vers PDF - + Different orientation Orientation différente - + The printer uses a different orientation than the drawing. Do you want to continue? L'imprimante utilise une autre orientation que le dessin. Voulez-vous continuer ? - - + + Different paper size Format de papier différent - - + + The printer uses a different paper size than the drawing. Do you want to continue? L'imprimante utilise un format de papier différent que le dessin. Voulez-vous continuer ? - + Opening file failed L'ouverture du fichier a échoué - + Can not open file %1 for writing. Impossible d’ouvrir le fichier %1 en écriture. - + Save Dxf File Enregistrez le fichier Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Sélectionné: @@ -1720,16 +1920,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Page de dessin : - + exported from FreeCAD document: exporté depuis le document FreeCAD : + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Flèche + + + + Dot + Point + + + + Start Symbol + Symbole de début + + + + Symbol: + Symbol: + + + + Value: + Valeur : + + + + Circular + Circular + + + + None + Aucun + + + + Triangle + Triangle + + + + Inspection + Inspection + + + + Hexagon + Hexagone + + + + Square + Carré + + + + Rectangle + Rectangle + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Vue de base + + + + Elements + Éléments + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Couleur + + + + Weight + Poids + + + + Style + Style + + + + NoLine + PasDeLigne + + + + Solid + Solide + + + + Dash + Tiret + + + + Dot + Point + + + + DashDot + Tiret point + + + + DashDotDot + Tiret point point + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Vue de base + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Clic gauche pour définir un point + + + + In progress edit abandoned. Start over. + Modification en cours abandonnée. Recommencer. + + TechDrawGui::TaskGeomHatch @@ -1798,135 +2212,141 @@ Do you want to continue? Leader Line - Leader Line + Ligne de rappel Base View - Base View + Vue de base - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Symbole de début - - + + No Symbol - No Symbol + Pas de symbole - - + + Filled Triangle - Filled Triangle + Triangle plein - - + + Open Triangle - Open Triangle + Triangle ouvert - - + + Tick Cocher - - - + + + Dot Point - - + + Open Circle - Open Circle + Cercle ouvert - + + + Fork + Fork + + + End Symbol - End Symbol + Symbole de fin - + Color Couleur - + Weight - Weight + Poids - + Style Style - + NoLine - NoLine + PasDeLigne - + Solid Solide - + Dash Tiret - + DashDot Tiret point - + DashDotDot Tiret point point - - + + Pick a starting point for leader line - Pick a starting point for leader line + Choisir un point de départ pour la ligne de rappel - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Cliquer et glisser les marqueurs pour ajuster la ligne de rappel - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Clic gauche pour définir un point - + Press OK or Cancel to continue - Press OK or Cancel to continue + Presser Accepter ou Abandonner pour poursuivre - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Modification en cours abandonnée. Recommencer. @@ -2151,27 +2571,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + Bloc d’annotation de texte enrichi Max Width - Max Width + Largeur max Base Feature - Base Feature + Élément de base Show Frame - Show Frame + Afficher la structure Start Rich Text Editor - Start Rich Text Editor + Lancer l’éditeur de texte enrichi @@ -2287,4 +2707,28 @@ Do you want to continue? Valeur : + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm index af32412b09..6cdba41ac2 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index f282a1730e..bff3f7435b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insire apuntamento @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insire plano de corte - + Inserts a view of a Section Plane from Arch Workbench Insire unha vista do plano de corte dende o banco de traballo Arquitectura @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insire grupo Clip @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Eliminar Vista dende ClipGroup - + Remove a View from Clip group Eliminar unha Vista dende ClipGroup @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Engade unha Vista a grupo Recortar - + Add a View to Clip group Engade unha Vista a grupo Clip - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insire un obxecto DraftWB - + Insert a View of a Draft Workbench object Insire unha vista do obxecto de banco de traballo Borrador @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Ficheiro - + Export page as SVG Exporta páxina como SVG - + Export a page to an SVG file Exportar unha páxina a un ficheiro SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Ficheiro - + Export page as DXF Exportar páxinas coma DXF - + Export a page to a DXF file Exportar páxina a ficheiro DXF - + Save Dxf File Gardar ficheiro Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + Engadir unha liña á vista CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Ligazón a dimensión de xeometría 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insire un novo acoutamento de ángulo de 3 puntos @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insire unha nova dimensión de ángulo @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + Inserir un novo globo CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insire un novo acoutamento diámetro - + Insert a new diameter dimension feature Insire unha nova característica de diámetro de acoutamento @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insire un novo acoutamento horizontal - + Insert a new horizontal distance dimension Insire unha nova distancia de acoutamento horizontal @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insire un novo acoutamento vertical - + Insert a new vertical distance dimension Insire unha dimensión de distancia vertical @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Inserir unha nova dimensión de lonxitude @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insire nova páxina usando unha Plantilla - + Select a Template File Seleciona un Arquivo Modelo - + Template (*.svg *.dxf) Modelo (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insire unha nova Páxina por defecto @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insire Vista na Páxina @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insire a Vista de Detalle @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insire a Vista da Sección na Páxina @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insire un Grupo de Proxección - + Insert multiple linked views of drawable object(s) Insire múltiples ligazóns a vistas de obxecto(s) debuxable(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + Engadir unha anotación de texto enriquecido CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insire vista de Folla de Cálculo - + Inserts a view of a selected spreadsheet Insire unha nova vista de folla de cálculo a escolmar @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insire Símbolo SVG - + Insert symbol from a svg file Insire símbolo dende un ficheiro svg @@ -555,38 +660,38 @@ Save changes - Save changes + Gardar cambios Close editor - Close editor + Pechar editor Paragraph formatting - Paragraph formatting + Formato de parágrafo Undo (CTRL+Z) - Undo (CTRL+Z) + Desfacer (CTRL+Z) Undo - Undo + Desfacer Redo - Redo + Refacer Cut (CTRL+X) - Cut (CTRL+X) + Tallar (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Copiar (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Colar (CTRL+V) Paste - Paste + Colar Link (CTRL+L) - Link (CTRL+L) + Ligazón (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Itálica (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Subliñado (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Riscado Strike Out - Strike Out + Strike Out Bullet list (CTRL+-) - Bullet list (CTRL+-) + Lista de marcadores (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Ordear lista (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Decrementar sangría (CTRL+,) Decrease indentation - Decrease indentation + Decrementar sangría Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Incrementar sangría (CTRL+.) Increase indentation - Increase indentation + Incrementar sangría Text foreground color - Text foreground color + Cor do texto en primeiro plano Text background color - Text background color + Cor de fondo do texto @@ -712,188 +817,201 @@ More functions - More functions + Máis funcións - + Standard Estándar - + Heading 1 - Heading 1 + Cabeceira 1 - + Heading 2 - Heading 2 + Cabeceira 2 - + Heading 3 - Heading 3 + Cabeceira 3 - + Heading 4 - Heading 4 + Cabeceira 4 - + Monospace - Monospace + Monoespazo - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Suprimir o formato de caracteres + + + + Remove all formatting + Suprimir tódolos formatos + + + Edit document source - Edit document source + Editar un documento fonte - + Document source - Document source + Fonte do documento - + Create a link - Create a link + Crear unha ligazón - + Link URL: - Link URL: + Ligazón URL: - + Select an image - Select an image + Escolmar unha imaxe - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todo (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Escolma errada - - + + No Shapes or Groups in this selection Sen Formas ou Grupos nesta selección - - + + Select at least 1 DrawViewPart object as Base. Escolme ao menos 1 obxecto DrawViewPart como base. - + Select one Clip group and one View. - Select one Clip group and one View. + Escolmar un grupo de Recorte e unha Vista. - + Select exactly one View to add to group. Escolma exactamente unha vista a engadir ao grupo. - + Select exactly one Clip group. Escolma exactamente un obxecto Clip. - + Clip and View must be from same Page. Clip e Vista debe ser dende algunha Páxina. - + Select exactly one View to remove from Group. Escolma exactamente unha vista a remover dende o grupo. - + View does not belong to a Clip Na vista non aparece unha Clip - + Choose an SVG file to open Escolme un ficheiro SVG para abrir - + Scalable Vector Graphic Gráfico vectorial escalábel - - + + Select at least one object. Escolma canda menos un obxecto. - + There is no Section Plane in selection. Non hai selección de Plano de corte. - + Select exactly one Spreadsheet object. Escolme só un obxecto Folla de cálculo. - + No Drawing View Sen Vista do Debuxo - + Open Drawing View before attempting export to SVG. Abre Vista de Debuxo antes de tentar exportar a SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Aviso de Selección + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - O bordo escolmado é unha BSpline. O radio será aproximado. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - O bordo escolmado é unha BSpline. O diámetro será aproximado. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Necesita dous bordos dereitos para facer un Acoutamento Angular - + Need three points to make a 3 point Angle Dimension Necesita tres puntos para facer un Acotamento de Ángulo de 3 puntos - + There is no 3D object in your selection Non hai obxectos 3D na túa selección - + There are no 3D Edges or Vertices in your selection Non hai Bordos 3D ou Vértices na túa selección - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Selección incorrecta - - + + Select an object first Primeiro escolme un obxecto - - + + Too many objects selected Demasiados obxectos escolmados - - + + Create a page first. Primeiro, cree unha páxina. - - + + No View of a Part in selection. Sen vista da peza en selección. - + No Feature with Shape in selection. Non hai característica con forma na escolma. - - + + + + + + + + Task In Progress - Task In Progress + Tarefa en Progreso - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Pechar o cadro de diálogo e tentalo outra vez. - - + + + + + Selection Error - Selection Error + Erro de Escolma - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Imposible adxuntar lider. Na vista escolmada. - + + You must select a base View for the line. - You must select a base View for the line. + Debes escolmar unha Vista base para a liña. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Escolma exactamente 1 páxina. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tódolos ficheiros (*.*) - + Export Page As PDF Exporta Páxina Como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporta páxina como SVG - + FreeCAD SVG Export Exporta como FreeCAD SVG - + Show drawing Amosar debuxo - + Toggle KeepUpdated Activar KeepUpdated @@ -1121,24 +1306,34 @@ Premer para actualizar texto - + New Leader Line - New Leader Line + Nova Liña Guía - + Edit Leader Line - Edit Leader Line + Editar Liña Guía Rich text creator - Rich text creator + Creador de texto enriquecido - + Rich text editor - Rich text editor + Editor de texto enriquecido + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Dimensións - + Arrow Style Estilo de Frecha @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Unidade anexa ao texto de acotamento Dimension text color - Dimension text color + Acoutamento color do texto Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Caracter usado para indicar Diámetro de acoutamento Use system setting for decimal places. - Use system setting for decimal places. + Use axustes do sistema para lugares decimais. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Número de postos decimais se non usas Decimais Globais - + Dimension font size in units Tamaño da fonte das cotas en unidades - + Dimension arrowhead size in units Tamaño da frecha das cotas en unidades - + Default Format - Default Format + Formato por Defecto - + Custom format for Dimension text - Custom format for Dimension text + Formato persoal para texto de acoutamento - + Decorations Decoracións - + Color for centerlines - Color for centerlines + Cor para liñas centrais - + Adjusts size of vertices in drawing Axustes de tamaño dos vértices no deseño - + Vertex Scale Escala de Vértice - + Round or Square outline in Detail view - Round or Square outline in Detail view + Redondo o Cadrado contorno da Vista polo miudo - + Round Redondo - + Square Cadrado - + Section Line Style Estilo da Liña de Sección - + Center Line Style Estilo da Liña Central - + Matting Style Estilo de Estera - + Line type for centerlines - Line type for centerlines + Tipo de liña para liñas centrais - - + + NeverShow Non Amosar - + Line color for sectionlines - Line color for sectionlines + Cor de liña para liñas de sección - + Line Group Name Nome de grupo de liñas - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Nome da entidade en LiñaGrupo do ficheiro CSV - + Vertex Color Cor de Vértice - + Vertex display color - Vertex display color + Color de vértice amosado - - + + Dash Trazo - - + + Dot Punto - - + + DashDot TrazoPunto - - + + DashDotDot TrazoPuntoPunto - - + + Solid Sólido - + Center Line Color Cor da Liña Central - + Section Line Color Cor da Sección da Liña @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exporta SVG - + Toggle &Keep Updated Alternar &Desactivar Actualizacións - + Toggle &Frames Alternar &Estruturas - + Export DXF - Export DXF + Exportar DXF - + Export PDF Exportar en PDF - + Different orientation Orientación diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impresora usa unha orientación de papel diferente da do debuxo. Quere seguir? - - + + Different paper size Tamaño de papel diferente - - + + The printer uses a different paper size than the drawing. Do you want to continue? A impresora usa un tamaño de papel diferente do do debuxo. Quere seguir? - + Opening file failed Falla ó abrir o ficheiro - + Can not open file %1 for writing. Non se pode abrir o ficheiro %1 para escribir. - + Save Dxf File Gardar ficheiro Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Escolmado: @@ -1721,16 +1921,230 @@ Quere seguir? TechDrawGui::QGVPage - + Drawing page: Páxina de Debuxo: - + exported from FreeCAD document: exportado dende documento FreeCAD: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Frecha + + + + Dot + Punto + + + + Start Symbol + Símbolo Inicial + + + + Symbol: + Symbol: + + + + Value: + Valor: + + + + Circular + Circular + + + + None + Ningún + + + + Triangle + Triángulo + + + + Inspection + Inspection + + + + Hexagon + Hexágono + + + + Square + Cadrado + + + + Rectangle + Rectángulo + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Vista Base + + + + Elements + Elementos + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Cor + + + + Weight + Peso + + + + Style + Estilo + + + + NoLine + SenLiña + + + + Solid + Sólido + + + + Dash + Trazo + + + + Dot + Punto + + + + DashDot + TrazoPunto + + + + DashDotDot + TrazoPuntoPunto + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Vista Base + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Preme botón esquerdo para definir un punto + + + + In progress edit abandoned. Start over. + En proceso edición abandonada. Inicia de novo. + + TechDrawGui::TaskGeomHatch @@ -1799,135 +2213,141 @@ Quere seguir? Leader Line - Leader Line + Liña Guía Base View - Base View + Vista Base - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Símbolo Inicial - - + + No Symbol - No Symbol + Sen Símbolo - - + + Filled Triangle - Filled Triangle + Triángulo Raiado - - + + Open Triangle - Open Triangle + Triángulo Aberto - - + + Tick Tick - - - + + + Dot Punto - - + + Open Circle - Open Circle + Círculo Aberto - + + + Fork + Fork + + + End Symbol - End Symbol + Símbolo Final - + Color Cor - + Weight - Weight + Peso - + Style Estilo - + NoLine - NoLine + SenLiña - + Solid Sólido - + Dash Trazo - + DashDot TrazoPunto - + DashDotDot TrazoPuntoPunto - - + + Pick a starting point for leader line - Pick a starting point for leader line + Escolma un punto de inicio para a liña líder - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Pincha e arrastra as marcas de axuste da liña líder - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Preme botón esquerdo para definir un punto - + Press OK or Cancel to continue - Press OK or Cancel to continue + Premer OK ou Cancelar para continuar - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + En proceso edición abandonada. Inicia de novo. @@ -2152,27 +2572,27 @@ Quere seguir? Rich Text Annotation Block - Rich Text Annotation Block + Texto enriquecido bloque de anotación Max Width - Max Width + Largura Máx Base Feature - Base Feature + Característica Base Show Frame - Show Frame + Amosar Estrutura Start Rich Text Editor - Start Rich Text Editor + Inicia Editor de Texto Enriquecido @@ -2288,4 +2708,28 @@ Quere seguir? Valor: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm index 270f77e4c9..d6bd05179a 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index fe5c0485ce..8089ab29b4 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Tehničko Crtanje - - + + Insert Annotation Umetanje primjedbe @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw Tehničko Crtanje - + Insert a Section Plane Izradi ravninu presjeka - + Inserts a view of a Section Plane from Arch Workbench Umetni pogled na dio ravni Radne površine Luk @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw Tehničko Crtanje - - + + Insert Clip group Umetni grupu Isječak @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw Tehničko Crtanje - + Remove View from ClipGroup Obriši pogled iz grupe Isječak - + Remove a View from Clip group Obriši pogled iz grupe Isječak @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw Tehničko Crtanje - + Add View to Clip group Dodaj pogled u grupi Isječak - + Add a View to Clip group Dodaj pogled u grupi Isječak - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw Tehničko Crtanje - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Tehničko Crtanje + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Tehničko Crtanje + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + Tehničko Crtanje + + + Insert a DraftWB object Umetni Nacrt-Wb objekt - + Insert a View of a Draft Workbench object Umetni pogled na objekt Radne površine Nacrt @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Datoteka - + Export page as SVG Izvoz Stranice u SVG - + Export a page to an SVG file Izvoz stranicu za SVG datoteku @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Datoteka - + Export page as DXF Izvoz Stranice u DXF - + Export a page to a DXF file Izvezi stranicu u DXF datoteku - + Save Dxf File Spremi Dxf Datoteku - + Dxf (*.dxf) DXF (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Tehničko Crtanje + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw Tehničko Crtanje - - + + Add a line to a view - Add a line to a view + Dodaj liniju u pogled CmdTechDrawLinkDimension - + TechDraw Tehničko Crtanje - - + + Link a dimension to 3D geometry Poveži jednu dimenziju na 3D geometriju - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Tehničko Crtanje - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Tehničko Crtanje + + + + Insert a new 3 point Angle dimension Umetnite novu dimenziju kuta sa 3 točke @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw Tehničko Crtanje - - + + Insert a new angle dimension Umetnite novu dimenziju kuta @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw Tehničko Crtanje - - + + Insert a new balloon - Insert a new balloon + Umetni novi balončić CmdTechDrawNewDiameterDimension - + TechDraw Tehničko Crtanje - + Insert a new diameter dimension Umetnite novu dimenziju promjera - + Insert a new diameter dimension feature Umetnite novu značajku dimenzije promjer @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw Tehničko Crtanje - + Insert a new horizontal dimension Umetnite novu vodoravnu dimenziju - + Insert a new horizontal distance dimension Umetnite novu dimenziju vodoravna udaljenost @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw Tehničko Crtanje - + Insert a new vertical dimension Umetnite novu okomitu dimenziju - + Insert a new vertical distance dimension Umetnite novu vertikalnu udaljenost dimenzije @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw Tehničko Crtanje - - + + Insert a new length dimension Umetanje nove dimenzije dužine @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw Tehničko Crtanje + - Insert new Page using Template Umetni novu stranicu pomoću predloška - + Select a Template File Odaberite datoteku predloška - + Template (*.svg *.dxf) Predložak (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw Tehničko Crtanje + - Insert new default Page Umetnite novu zadanu stranicu @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw Tehničko Crtanje + - Insert View in Page Umetnite pogled na stranicu @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw Tehničko Crtanje + - Insert Detail View Umetanje detaljnog pogleda @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw Tehničko Crtanje + - Insert Section View in Page Umetnite pogled na odjeljak stranice @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw Tehničko Crtanje - + Insert Projection Group Umetanje Projekcijske Grupe - + Insert multiple linked views of drawable object(s) Umetanje više povezanih prikaza od crtajućih objekata + + CmdTechDrawQuadrant + + + TechDraw + Tehničko Crtanje + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw Tehničko Crtanje - - + + Add a rich text annotation - Add a rich text annotation + Dodaj komentar formatiranog teksta CmdTechDrawSpreadsheet - + TechDraw Tehničko Crtanje - + Insert Spreadsheet view Umetanje tablice pregleda - + Inserts a view of a selected spreadsheet Umeće prikaz odabrane tablice pregleda @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw Tehničko Crtanje - + Insert SVG Symbol Umetanje SVG simbola - + Insert symbol from a svg file Umetanje simbola iz svg datoteke @@ -555,38 +660,38 @@ Save changes - Save changes + Spremi promjene Close editor - Close editor + Zatvori uređivač Paragraph formatting - Paragraph formatting + Formatiranje odlomka Undo (CTRL+Z) - Undo (CTRL+Z) + Poništi promjenu (CTRL + Z) Undo - Undo + Poništi promjenu Redo - Redo + Vrati Cut (CTRL+X) - Cut (CTRL+X) + Izreži (STRG+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Kopiraj (STRG+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Umetni (STRG+V) Paste - Paste + Umetni Link (CTRL+L) - Link (CTRL+L) + Link (STRG+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Ukošeno (Ctrl + I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Podvučeno (Ctrl + U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Precrtano Strike Out - Strike Out + Prekriženo Bullet list (CTRL+-) - Bullet list (CTRL+-) + Registar (Strg + -) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Numerirani popis (Strg + =) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Smanji uvlačenje (Ctrl +,) Decrease indentation - Decrease indentation + Smanji uvlačenje Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Povećaj uvlačenje (Ctrl +.) Increase indentation - Increase indentation + Povećaj uvlačenje Text foreground color - Text foreground color + Boja ispisa Text background color - Text background color + Boja pozadine stranice @@ -712,188 +817,201 @@ More functions - More functions + Više funkcija - + Standard Standard - + Heading 1 - Heading 1 + Zaglavlje 1 - + Heading 2 - Heading 2 + Zaglavlje 2 - + Heading 3 - Heading 3 + Zaglavlje 3 - + Heading 4 - Heading 4 + Zaglavlje 4 - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Ukloni format znakova + + + + Remove all formatting + Ukloni sva formatiranja + + + Edit document source - Edit document source + Uredi izvor dokumenta - + Document source - Document source + Izvor dokumenta - + Create a link - Create a link + Stvorite poveznicu - + Link URL: - Link URL: + URL poveznice: - + Select an image - Select an image + Odaberite sliku - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Sve (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Pogrešan odabir - - + + No Shapes or Groups in this selection Nema oblika ili grupa u ovom odabiru - - + + Select at least 1 DrawViewPart object as Base. Odaberite najmanje 1 DrawViewPart objekt kao bazu. - + Select one Clip group and one View. - Select one Clip group and one View. + Odaberite 1 grupu Isječak i 1 Pogled. - + Select exactly one View to add to group. Odaberite točno jedan Pogled za dodavanje u grupu. - + Select exactly one Clip group. Odaberite točno jednu isječak grupu. - + Clip and View must be from same Page. Isječak i prikaz moraju biti s iste stranice. - + Select exactly one View to remove from Group. Odaberite točno jedan Pogled za uklanjanje iz grupe. - + View does not belong to a Clip Prikaz ne pripada isječku - + Choose an SVG file to open Odaberite SVG datoteku za otvaranje - + Scalable Vector Graphic Skalabilna vektorska grafika - - + + Select at least one object. Odaberite barem jedan objekt. - + There is no Section Plane in selection. Nema Dijela Ravni u odabiru. - + Select exactly one Spreadsheet object. Odaberite točno jedan objekt tablice. - + No Drawing View Nema pogleda crteža - + Open Drawing View before attempting export to SVG. Otvori prikaz prije izvoza u SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Upozorenje odabira + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Odabrani rub je BSpline. Polumjer će biti približno točan. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Odabrani rub je BSpline. Promjer će biti približno točan. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Trebaju mi dva ravna ruba da napravim dimenziju kuta - + Need three points to make a 3 point Angle Dimension Trebaju mi tri točke da napravim Dimenziju Kuta od 3 točke - + There is no 3D object in your selection Nema 3D objekta u odabranom - + There are no 3D Edges or Vertices in your selection Ne postoje 3D rubovi ili vrhovi na vašem odabiru - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Netočan odabir - - + + Select an object first Najprije odaberite objekt - - + + Too many objects selected Previše objekata odabrano - - + + Create a page first. Najprije napravite stranicu. - - + + No View of a Part in selection. Ne postoji Pogled na Dio u odabiru. - + No Feature with Shape in selection. Nema Svojstva sa Oblikom u izboru. - - + + + + + + + + Task In Progress - Task In Progress + Rješavanje u postupku - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Zatvori aktivni dijalog rješavača i pokušaj ponovo. - - + + + + + Selection Error - Selection Error + Greška odabira - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Odaberite točno 1 stranicu. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Sve datoteke (*.*) - + Export Page As PDF Izvoz Stranice u PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvoz Stranice u SVG - + FreeCAD SVG Export FreeCAD SVG izvoz - + Show drawing Prikaži crtež - + Toggle KeepUpdated Uključivanje/isključivanje KeepUpdated @@ -1121,12 +1306,12 @@ Klikni za nadogradnju teksta - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimenzije - + Arrow Style Vrsta strelice @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimenzije veličina fonta u jedinicama - + Dimension arrowhead size in units Dimenzija vrha strelice veličine u jedinicama - + Default Format - Default Format + Podrazumijevani format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Dekoracija - + Color for centerlines - Color for centerlines + Boja srednje linije - + Adjusts size of vertices in drawing Prilagođava veličinu vrhova u crtežu - + Vertex Scale Skaliranje Vrha - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Zaobljeni - + Square Kvadrat - + Section Line Style Stil odjeljka linije - + Center Line Style Stil linije centra - + Matting Style Stil matiranja - + Line type for centerlines Line type for centerlines - - + + NeverShow Nemoj prikazati - + Line color for sectionlines Line color for sectionlines - + Line Group Name Naziv grupe linija - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Boja Vrha - + Vertex display color Vertex display color - - + + Dash Crtica - - + + Dot Točka - - + + DashDot Crtica Točka - - + + DashDotDot Crtica Točka Točka - - + + Solid Čvrsto tijelo - + Center Line Color Boja srednje linije - + Section Line Color Boja linije presjeka @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &izvoz SVG - + Toggle &Keep Updated Uključivanje/isključivanje & Držati Obnovljeno - + Toggle &Frames Uključivanje/isključivanje & Okviri - + Export DXF - Export DXF + Izvoz DFX - + Export PDF Izvoz PDF - + Different orientation Drugačija orijentacija - + The printer uses a different orientation than the drawing. Do you want to continue? Pisač koristi drugu orijentaciju ispisa nego što je u crtežu. Želite li nastaviti? - - + + Different paper size Drugačija veličina papira - - + + The printer uses a different paper size than the drawing. Do you want to continue? Pisač koristi drugu veličinu papra nego što je u crtežu. Želite li nastaviti? - + Opening file failed Otvaranje dokumenta nije uspjelo - + Can not open file %1 for writing. Ne mogu otvoriti dokument %1 za ispis. - + Save Dxf File Spremi Dxf Datoteku - + Dxf (*.dxf) DXF (*.dxf) - + Selected: Odabrane: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Stranica crteža: - + exported from FreeCAD document: izvezeno iz FreeCAD dokumenta: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Strelica + + + + Dot + Točka + + + + Start Symbol + Početni Simbol + + + + Symbol: + Symbol: + + + + Value: + Vrijednost: + + + + Circular + Circular + + + + None + Prazno + + + + Triangle + Trokut + + + + Inspection + Inspection + + + + Hexagon + Šesterokut + + + + Square + Kvadrat + + + + Rectangle + Pravokutnik + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Osnovni Pogled + + + + Elements + Elementi + + + + Vertical + Okomito + + + + Horizontal + Vodoravno + + + + Aligned + Aligned + + + + Color + Boja + + + + Weight + Weight + + + + Style + Stil + + + + NoLine + NoLine + + + + Solid + Čvrsto tijelo + + + + Dash + Crtica + + + + Dot + Točka + + + + DashDot + Crtica Točka + + + + DashDotDot + Crtica Točka Točka + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Osnovni Pogled + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Lijevi klik za postavljanje točke + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1802,128 +2216,134 @@ Do you want to continue? Base View - Base View + Osnovni Pogled - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Početni Simbol - - + + No Symbol - No Symbol + Bez Simbola - - + + Filled Triangle - Filled Triangle + Ispunjen Trokut - - + + Open Triangle - Open Triangle + Otvoreni Trokut - - + + Tick Okomita crtica - - - + + + Dot Točka - - + + Open Circle - Open Circle + Otvoreni Krug - + + + Fork + Fork + + + End Symbol End Symbol - + Color Boja - + Weight Weight - + Style Stil - + NoLine NoLine - + Solid Čvrsto tijelo - + Dash Crtica - + DashDot Crtica Točka - + DashDotDot Crtica Točka Točka - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Lijevi klik za postavljanje točke - + Press OK or Cancel to continue - Press OK or Cancel to continue + Klikni na OK ili Prekini za nastavak - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2160,12 +2580,12 @@ Do you want to continue? Base Feature - Base Feature + Osnovna Svojstva Show Frame - Show Frame + Prikaži Okvir @@ -2286,4 +2706,28 @@ Do you want to continue? Vrijednost: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm index 3c1f6fc1d4..5b206092af 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index e9f89b5251..5f092850d5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw MűszakiRajz - - + + Insert Annotation Széljegyzet beszúrása @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw MűszakiRajz - + Insert a Section Plane Egy metszősík beszúrása - + Inserts a view of a Section Plane from Arch Workbench Egy nézetet illeszt a metszősíkba az építészet munkafelületből @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw MűszakiRajz - - + + Insert Clip group Kivágás csoport beszúrása @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw MűszakiRajz - + Remove View from ClipGroup Nézet eltávolítása kivágás csoportból - + Remove a View from Clip group Egy nézet eltávolítása kivágás csoportból @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw MűszakiRajz - + Add View to Clip group Nézet hozzáadása a kivágás csoporthoz - + Add a View to Clip group Nézet hozzáadása a kivágás csoporthoz - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw MűszakiRajz - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + MűszakiRajz + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + MűszakiRajz + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + MűszakiRajz + + + Insert a DraftWB object Tervezet munkafelület objektum beszúrása - + Insert a View of a Draft Workbench object Szúrjon be egy nézetet a tervezet munkafelület tárgyból @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fájl - + Export page as SVG Oldal export SVG formában - + Export a page to an SVG file Egy oldal exportálása SVG-fájlba @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fájl - + Export page as DXF Oldal export DXF formában - + Export a page to a DXF file Egy oldal exportálása DXF-fájlba - + Save Dxf File Dxf-fájl mentése - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + MűszakiRajz + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw MűszakiRajz - - + + Add a line to a view - Add a line to a view + Adj egy egyenest a nézethez CmdTechDrawLinkDimension - + TechDraw MűszakiRajz - - + + Link a dimension to 3D geometry Csatolja a dimenziót, a 3D-s geometriához - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw MűszakiRajz - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + MűszakiRajz + + + + Insert a new 3 point Angle dimension Egy új 3 pontos szög méretvonal beillesztése @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw MűszakiRajz - - + + Insert a new angle dimension Egy új szög-dimenzió beillesztése @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw MűszakiRajz - - + + Insert a new balloon - Insert a new balloon + Egy új buborék beszúrása CmdTechDrawNewDiameterDimension - + TechDraw MűszakiRajz - + Insert a new diameter dimension Egy új átmérő-dimenzió beillesztése - + Insert a new diameter dimension feature Egy új átmérő-dimenzió tulajdonság beillesztése @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw MűszakiRajz - + Insert a new horizontal dimension Egy új vízszintes dimenzió beillesztése - + Insert a new horizontal distance dimension Egy új vízszintes távolság dimenzió beillesztése @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw MűszakiRajz - + Insert a new vertical dimension Egy új függőleges dimenzió beillesztése - + Insert a new vertical distance dimension Egy új függúleges távolság dimenzió beillesztése @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw MűszakiRajz - - + + Insert a new length dimension Egy új hossz-dimenzió beillesztése @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw MűszakiRajz + - Insert new Page using Template Helyezzen be az új oldalt a sablon használatával - + Select a Template File Válasszon ki egy sablon fájlt - + Template (*.svg *.dxf) Sablon (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw MűszakiRajz + - Insert new default Page Új alapértelmezett lap beillesztése @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw MűszakiRajz + - Insert View in Page Helyezzen be nézetet az oldalba @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw MűszakiRajz + - Insert Detail View Helyezzen be a részlet nézetet @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw MűszakiRajz + - Insert Section View in Page Szakasz nézet beszúrása a rajzba @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw MűszakiRajz - + Insert Projection Group Vetítés csoport beszúrása - + Insert multiple linked views of drawable object(s) Rajzolható objektum(ok) több összekapcsolt nézetének beszúrása + + CmdTechDrawQuadrant + + + TechDraw + MűszakiRajz + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw MűszakiRajz - - + + Add a rich text annotation - Add a rich text annotation + Egy szöveges magyarázat beszúrása CmdTechDrawSpreadsheet - + TechDraw MűszakiRajz - + Insert Spreadsheet view Táblázat nézet beszúrása - + Inserts a view of a selected spreadsheet A kiválasztott számolótábla-nézetetének beillesztése @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw MűszakiRajz - + Insert SVG Symbol SVG szimbólum beszúrása - + Insert symbol from a svg file Egy svg-fájl szimbólimának beszúrása @@ -555,38 +660,38 @@ Save changes - Save changes + Változások elmentése Close editor - Close editor + Szerkesztő bezárása Paragraph formatting - Paragraph formatting + Bekezdés formázás Undo (CTRL+Z) - Undo (CTRL+Z) + Visszavonás (CTRL + Z) Undo - Undo + Visszavonás Redo - Redo + Ismétlés Cut (CTRL+X) - Cut (CTRL+X) + Kivágás (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Másolás (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Beillesztés (CTRL+V) Paste - Paste + Beillesztés Link (CTRL+L) - Link (CTRL+L) + Hivatkozás (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Dőlt (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Aláhúzott (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Áthúzott Strike Out - Strike Out + Kihúzott Bullet list (CTRL+-) - Bullet list (CTRL+-) + Felsorolásjelek listája (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Rendezett lista (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Behúzás csökkentése (CTRL+,) Decrease indentation - Decrease indentation + Behúzás csökkentése Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Behúzás növelése (CTRL+.) Increase indentation - Increase indentation + Behúzás növelése Text foreground color - Text foreground color + Szöveg előtér szín Text background color - Text background color + Szöveg háttér szín @@ -712,188 +817,201 @@ More functions - More functions + További funkciók - + Standard Általános - + Heading 1 - Heading 1 + Címsor 1 - + Heading 2 - Heading 2 + Címsor 2 - + Heading 3 - Heading 3 + Címsor 3 - + Heading 4 - Heading 4 + Címsor 4 - + Monospace - Monospace + Egyterű - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Karakter formázás eltávolítása + + + + Remove all formatting + Minden formázás eltávolítása + + + Edit document source - Edit document source + Dokumentumforrás szerkesztése - + Document source - Document source + Dokumentumforrás - + Create a link - Create a link + Létrehoz egy hivatkozást - + Link URL: - Link URL: + Hivatkozás webcíme: - + Select an image - Select an image + Válasszon ki egy képet - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Összes (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Rossz kijelölés - - + + No Shapes or Groups in this selection Nincsenek alakzatok vagy csoportok ebben a kiválasztásban - - + + Select at least 1 DrawViewPart object as Base. Jelöljön ki legalább 1 AlkatrészRajzNézet tárgyat a kiinduláshoz. - + Select one Clip group and one View. - Select one Clip group and one View. + Egy kivágás csoport és egy nézet kiválasztása. - + Select exactly one View to add to group. Válasszon pontosan egy nézetet a csoporthoz adásra. - + Select exactly one Clip group. Jelöljön ki pontosan egy kivágandó tárgyat. - + Clip and View must be from same Page. Nyírás és a nézet azonos oldalon legyen. - + Select exactly one View to remove from Group. Válasszon pontosan egy nézetet a csoportból eltávolításra. - + View does not belong to a Clip Nézet nem tartozik kinyíráshoz - + Choose an SVG file to open SVG fájl kiválasztása megnyitáshoz - + Scalable Vector Graphic Méretezhető vektorgrafika - - + + Select at least one object. Jelöljön ki legalább egy objektumot. - + There is no Section Plane in selection. Nincs metszősík a kiválasztásban. - + Select exactly one Spreadsheet object. Jelöljön ki pontosan egy számolótábla tárgyat. - + No Drawing View Nincs rajz nézet - + Open Drawing View before attempting export to SVG. Nyissa meg a rajz nézetet az SVG exportálási kísérlet előtt. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Kijelölés figyelmeztetés + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Kiválasztott él egy folyamatos ív. A sugár hozzávetőleges lesz. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Kiválasztott él egy folyamatos ív. Az átmérő hozzávetőleges lesz. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Két egyenes él szükséges egy szög méretvonal létrehozásához - + Need three points to make a 3 point Angle Dimension Három pont kell a 3 pontos szög méretvonalához - + There is no 3D object in your selection Nem található 3D objektum a kijelölésében - + There are no 3D Edges or Vertices in your selection Nincsenek 3D-s élek vagy csúcspontok a kijelölésében - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Hibás kijelölés - - + + Select an object first Először válasszon ki egy tárgyat - - + + Too many objects selected Túl sok kijelölt objektum - - + + Create a page first. Először hozzon létre egy oldalt. - - + + No View of a Part in selection. Nincs alkatrész nézet ebben a kiválasztásban. - + No Feature with Shape in selection. Nincs alakzat tulajdonság a kiválasztásban. - - + + + + + + + + Task In Progress - Task In Progress + A feladat folyamatban - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Zárja be az aktív feladatot és próbálja később. - - + + + + + Selection Error - Selection Error + Kiválasztási hiba - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + A vezér egyenest nem tudja csatolni. Nem lett kiválasztva alapértelmezett nézet. - + + You must select a base View for the line. - You must select a base View for the line. + Alapértelmezett nézetet kell kiválasztania az egyeneshez. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Válasszon ki pontosan 1 oldalt. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Összes fájl (*.*) - + Export Page As PDF Oldal export PDF formában - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Oldal export SVG formában - + FreeCAD SVG Export FreeCAD SVG exportálás - + Show drawing Mutasd a rajzot - + Toggle KeepUpdated Frissen tartás kapcsolója @@ -1121,24 +1306,34 @@ Kattintson a szöveg frissítéséhez - + New Leader Line - New Leader Line + Új vezér egyenes - + Edit Leader Line - Edit Leader Line + Vezér egyenes szerkesztése Rich text creator - Rich text creator + Szöveg szerkesztő - + Rich text editor - Rich text editor + Szöveg szerkesztő + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Méretek - + Arrow Style Nyíl stílusa @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Fűzze a mértékegységeket a méretvonal szövegéhez Dimension text color - Dimension text color + Méretvonal szöveg szín Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Az átmérő dimenzió jelzésére használandó karakter Use system setting for decimal places. - Use system setting for decimal places. + A rendszerbeállítás használata tizedesjegyek számához. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + A tizedesjegyek száma, ha nem használja a globális tizedeseket - + Dimension font size in units Méretvonal betű mérete mértékegységben megadva - + Dimension arrowhead size in units Méretvonal nyílfejmérete mértékegységben megadva - + Default Format - Default Format + Alapértelmezett formátum - + Custom format for Dimension text - Custom format for Dimension text + Egyedi formátum a méretvonal szövegéhez - + Decorations Dekorációk - + Color for centerlines - Color for centerlines + Szín a középtengelyhez - + Adjusts size of vertices in drawing Beállítja a csúcspontok méreteit a rajzon - + Vertex Scale Végpont nagyítás - + Round or Square outline in Detail view - Round or Square outline in Detail view + Kör és négyzet körvonal a részlet nézetben - + Round Kerek - + Square Négyzet - + Section Line Style A vonal szakasz stílusa - + Center Line Style Tengelyvonal stílus - + Matting Style Formázás stílusa - + Line type for centerlines - Line type for centerlines + Vonal típus a középtengelyhez - - + + NeverShow Sohenemutassa - + Line color for sectionlines - Line color for sectionlines + Vonal típus a szakasz egyenesekhez - + Line Group Name Egyenes csoport név - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + A belépő VonalCsoport CSV fájl neve - + Vertex Color Végpont színe - + Vertex display color - Vertex display color + Végpont megjelenítési szín - - + + Dash Szaggatott - - + + Dot Pont - - + + DashDot Pontvonal - - + + DashDotDot Kétpontvonal - - + + Solid Szilárd test - + Center Line Color Tengely vonalszín - + Section Line Color A vonal szakasz színe @@ -1642,77 +1842,77 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exportálás SVG-be - + Toggle &Keep Updated Frissen tartás kapcsolója - + Toggle &Frames Keretek kapcsolója - + Export DXF - Export DXF + DXF export - + Export PDF Exportálás PDF-be - + Different orientation Eltérő tájolású - + The printer uses a different orientation than the drawing. Do you want to continue? A nyomtató a rajztól eltérő tájolást használ. Szeretné fojtatni? - - + + Different paper size Eltérő papírméret - - + + The printer uses a different paper size than the drawing. Do you want to continue? A nyomtató a rajztól eltérő méretű papír méretet használ. Szeretné folytatni? - + Opening file failed Fájl megnyitása sikertelen - + Can not open file %1 for writing. %1 fájlt nem nyitható meg íráshoz. - + Save Dxf File Dxf-fájl mentése - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Kiválasztott: @@ -1720,16 +1920,230 @@ Szeretné folytatni? TechDrawGui::QGVPage - + Drawing page: Rajz oldal: - + exported from FreeCAD document: FreeCAD dokumentumból exportált: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Nyíl + + + + Dot + Pont + + + + Start Symbol + Indulási szimbólum + + + + Symbol: + Symbol: + + + + Value: + Érték: + + + + Circular + Circular + + + + None + Egyik sem + + + + Triangle + Háromszög + + + + Inspection + Inspection + + + + Hexagon + Hatszög + + + + Square + Négyzet + + + + Rectangle + Téglalap + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Alap nézet + + + + Elements + Elemek + + + + Vertical + Függőleges + + + + Horizontal + Vízszintes + + + + Aligned + Aligned + + + + Color + Szín + + + + Weight + Súly + + + + Style + Stílus + + + + NoLine + Nincs vonal + + + + Solid + Szilárd test + + + + Dash + Szaggatott + + + + Dot + Pont + + + + DashDot + Pontvonal + + + + DashDotDot + Kétpontvonal + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Alap nézet + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Bal klikk pont meghatározásához + + + + In progress edit abandoned. Start over. + Folyamatban lévő szerkesztés megszakítva. Kezdje újra. + + TechDrawGui::TaskGeomHatch @@ -1798,135 +2212,141 @@ Szeretné folytatni? Leader Line - Leader Line + Vezér egyenes Base View - Base View + Alap nézet - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Indulási szimbólum - - + + No Symbol - No Symbol + Nincs szimbólum - - + + Filled Triangle - Filled Triangle + Kitöltött háromszög - - + + Open Triangle - Open Triangle + Nyitott háromszög - - + + Tick Jelölők - - - + + + Dot Pont - - + + Open Circle - Open Circle + Nyitott kör - + + + Fork + Fork + + + End Symbol - End Symbol + Végződés szimbólum - + Color Szín - + Weight - Weight + Súly - + Style Stílus - + NoLine - NoLine + Nincs vonal - + Solid Szilárd test - + Dash Szaggatott - + DashDot Pontvonal - + DashDotDot Kétpontvonal - - + + Pick a starting point for leader line - Pick a starting point for leader line + Válasszon egy kezdő pontot a vezéregyenesnek - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Kattintson és húzzon jelöléseket a vezér egyenes beállításához - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Bal klikk pont meghatározásához - + Press OK or Cancel to continue - Press OK or Cancel to continue + Nyomj OK-t vagy Mégse a folytatáshoz - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Folyamatban lévő szerkesztés megszakítva. Kezdje újra. @@ -2151,27 +2571,27 @@ Szeretné folytatni? Rich Text Annotation Block - Rich Text Annotation Block + Szöveg jegyzetblokk Max Width - Max Width + Max szélesség Base Feature - Base Feature + Alap tulajdonság Show Frame - Show Frame + Keret megjelenítése Start Rich Text Editor - Start Rich Text Editor + Szöveg szerkesztő indítása @@ -2287,4 +2707,28 @@ Szeretné folytatni? Érték: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm index 9926a4a1ed..74951686f9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index 43f64772c0..76f84a40ec 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Mengajukan - + Export page as SVG Ekspor sebagai SVG - + Export a page to an SVG file Mengekspor halaman ke file SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Mengajukan - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Tautkan dimensi ke geometri 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Masukkan dimensi sudut baru @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Masukkan dimensi jarak vertikal baru @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Masukkan dimensi panjang baru @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Pilih File Template - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Sisipkan Grup Proyeksi - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Standar - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Pilihan salah - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Klip dan Tampilan harus dari Halaman yang sama. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Lihat bukan milik Klip - + Choose an SVG file to open Pilih file SVG untuk membuka - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Pilih setidaknya satu objek. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Pilih salah satu objek Spreadsheet. - + No Drawing View Tidak ada tampilan gambar - + Open Drawing View before attempting export to SVG. Buka Drawing View sebelum mencoba ekspor ke SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Tidak ada objek 3D dalam pilihan Anda - + There are no 3D Edges or Vertices in your selection Tidak ada Tepi atau Simpul 3D dalam pilihan Anda - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Pilihan salah - - + + Select an object first Pilih objek terlebih dahulu - - + + Too many objects selected Terlalu banyak objek yang dipilih - - + + Create a page first. Buat halaman terlebih dahulu. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Pilih tepat 1 halaman. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Halaman Ekspor Sebagai PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Ekspor sebagai SVG - + FreeCAD SVG Export Ekspor SVG FreeCAD - + Show drawing Tampilkan gambar - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Ukuran - + Arrow Style Gaya panah @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Dekorasi - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Bulat - + Square Kotak - + Section Line Style Bagian Gaya Baris - + Center Line Style Gaya Baris Tengah - + Matting Style Gaya Bermasalah - + Line type for centerlines Line type for centerlines - - + + NeverShow Tidak pernah menunjukkan - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Berlari - - + + Dot Dot - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Padat - + Center Line Color Warna Garis Pusat - + Section Line Color Bagian Warna Baris @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG & Ekspor SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Ekspor PDF - + Different orientation Orientasi berbeda - + The printer uses a different orientation than the drawing. Do you want to continue? Printer menggunakan orientasi yang berbeda dari pada gambar. Apakah Anda ingin melanjutkan? - - + + Different paper size Ukuran kertas berbeda - - + + The printer uses a different paper size than the drawing. Do you want to continue? Printer menggunakan ukuran kertas yang berbeda dari pada gambar. Apakah Anda ingin melanjutkan? - + Opening file failed Membuka file gagal - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Terpilih: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Panah + + + + Dot + Dot + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Nilai: + + + + Circular + Circular + + + + None + Tidak ada + + + + Triangle + Segi tiga + + + + Inspection + Inspection + + + + Hexagon + Segi enam + + + + Square + Kotak + + + + Rectangle + Empat persegi panjang + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elemen + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Warna + + + + Weight + Weight + + + + Style + Gaya + + + + NoLine + NoLine + + + + Solid + Padat + + + + Dash + Berlari + + + + Dot + Dot + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Dot - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Warna - + Weight Weight - + Style Gaya - + NoLine NoLine - + Solid Padat - + Dash Berlari - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Nilai: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm index dc939c48b7..d9c6840786 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index 4783a3e60f..15323522df 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Annotazione @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Vista di Arch - + Inserts a view of a Section Plane from Arch Workbench Inserisce una vista di un piano di sezione dell'ambiente Arch @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Gruppo di Clip @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Rimuovi la vista dal gruppo clip - + Remove a View from Clip group Rimuove una vista dal gruppo di Clip @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Aggiungi una vista al gruppo clip - + Add a View to Clip group Aggiunge una vista al Gruppo di clip - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Oggetto di Draft - + Insert a View of a Draft Workbench object Inserisce una vista di un oggetto dell'ambiente Draft @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File File - + Export page as SVG Esporta pagina in SVG - + Export a page to an SVG file Esporta una pagina in un file SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File File - + Export page as DXF Esporta la pagina in DXF - + Export a page to a DXF file Esporta una pagina in un file DXF - + Save Dxf File Salva il file DXF - + Dxf (*.dxf) DXF (*. dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + Aggiungi una linea a una vista CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link alla dimensione - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Angolo da 3 punti @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Angolo @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + Pallinatura CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Diametro - + Insert a new diameter dimension feature Inserisce una nuova funzione di dimensione diametro nel disegno @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Dimensione orizzontale - + Insert a new horizontal distance dimension Inserisce una nuova dimensione di distanza orizzontale @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Dimensione verticale - + Insert a new vertical distance dimension Distanza verticale @@ -329,7 +420,7 @@ Apply geometric hatch to a Face - Applica un tratteggio geometrico ad una faccia + Tratteggio geometrico @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Lunghezza @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Nuovo disegno da modello - + Select a Template File Selezionare un File modello - + Template (*.svg *.dxf) Modello (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Nuovo disegno standard @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Vista @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Dettaglio @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Sezione @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Gruppo di proiezioni - + Insert multiple linked views of drawable object(s) Inserisce più viste collegate di oggetti disegnabili + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + Blocco di testo CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Foglio di calcolo - + Inserts a view of a selected spreadsheet Inserisce in un disegno una vista di un foglio di calcolo selezionato @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Simbolo SVG - + Insert symbol from a svg file Inserisce il simbolo da un file in formato svg @@ -555,38 +660,38 @@ Save changes - Save changes + Salva le modifiche Close editor - Close editor + Chiudi l'editor Paragraph formatting - Paragraph formatting + Formato del paragrafo Undo (CTRL+Z) - Undo (CTRL+Z) + Annulla (Ctrl+Z) Undo - Undo + Annulla Redo - Redo + Ripristina Cut (CTRL+X) - Cut (CTRL+X) + Taglia (Ctrl+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Copia (Ctrl+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Incolla (Ctrl+V) Paste - Paste + Incolla Link (CTRL+L) - Link (CTRL+L) + Link (Ctrl+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Corsivo (Ctrl+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Sottolineato (Ctrl+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Barrato Strike Out - Strike Out + Barrato Bullet list (CTRL+-) - Bullet list (CTRL+-) + Elenco puntato (Ctrl+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Elenco ordinato (Ctrl+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Riduci rientro (Ctrl+,) Decrease indentation - Decrease indentation + Diminuisci rientro Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Aumenta rientro (Ctrl+.) Increase indentation - Increase indentation + Aumenta rientro Text foreground color - Text foreground color + Colore di primo piano del testo Text background color - Text background color + Colore di sfondo del testo @@ -712,188 +817,201 @@ More functions - More functions + Altre funzioni - + Standard Standard - + Heading 1 - Heading 1 + Intestazione 1 - + Heading 2 - Heading 2 + Intestazione 2 - + Heading 3 - Heading 3 + Intestazione 3 - + Heading 4 - Heading 4 + Intestazione 4 - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Rimuovi formattazione caratteri + + + + Remove all formatting + Rimuovi la formattazione + + + Edit document source - Edit document source + Modifica sorgente documento - + Document source - Document source + Sorgente documento - + Create a link - Create a link + Crea un link - + Link URL: - Link URL: + URL link: - + Select an image - Select an image + Seleziona un'immagine - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tutti (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Selezione errata - - + + No Shapes or Groups in this selection In questa selezione non c'è nessuna forma o gruppo - - + + Select at least 1 DrawViewPart object as Base. Seleziona almeno 1 oggetto DrawViewPart come Base. - + Select one Clip group and one View. - Select one Clip group and one View. + Selezionare un gruppo Clip e una Vista. - + Select exactly one View to add to group. Selezionare esattamente una vista da aggiungere al gruppo. - + Select exactly one Clip group. Selezionare esattamente un gruppo di Clip. - + Clip and View must be from same Page. Clip e Vista deve essere dalla stessa pagina. - + Select exactly one View to remove from Group. Selezionare una vista da rimuovere dal gruppo. - + View does not belong to a Clip La Vista non appartiene a una Clip - + Choose an SVG file to open Seleziona un file SVG da aprire - + Scalable Vector Graphic Immagine vettoriale scalabile - - + + Select at least one object. Selezionare almeno un oggetto. - + There is no Section Plane in selection. Non c'è nessun piano di sezione nella selezione. - + Select exactly one Spreadsheet object. Selezionare un solo oggetto Foglio di calcolo. - + No Drawing View Nessuna Vista di disegno - + Open Drawing View before attempting export to SVG. Aprire una Vista Disegno prima di tentare l'esportazione in SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Avviso di selezione + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Il bordo selezionato è una BSpline. Il raggio sarà approssimativo. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Il bordo selezionato è una BSpline. Il diametro sarà approssimativo. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Per creare una dimensione di Angolo servono due bordi dritti - + Need three points to make a 3 point Angle Dimension Per creare una dimensione di Angolo da 3 punti servono tre punti - + There is no 3D object in your selection Nella selezione non esiste alcun oggetto 3D - + There are no 3D Edges or Vertices in your selection Nella selezione non esistono spigoli o vertici 3D - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Selezione non corretta - - + + Select an object first Prima selezionare un oggetto - - + + Too many objects selected Troppi oggetti selezionati - - + + Create a page first. Prima creare una pagina. - - + + No View of a Part in selection. Nessuna vista di una Parte nella selezione. - + No Feature with Shape in selection. Nessuna funzione con una forma nella selezione. - - + + + + + + + + Task In Progress - Task In Progress + Attività in corso - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Chiudi la finestra di dialogo attiva e riprova. - - + + + + + Selection Error - Selection Error + Errore di selezione - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Impossibile agganciare la guida. Nessuna vista di base selezionata. - + + You must select a base View for the line. - You must select a base View for the line. + Selezionare una vista base per la linea. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Selezionare solo 1 pagina. - + PDF (*.pdf) PDF (*. pdf) - - + + All Files (*.*) Tutti i File (*.*) - + Export Page As PDF Esporta pagina in PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Esporta pagina in SVG - + FreeCAD SVG Export Esportazione in formato SVG di FreeCAD - + Show drawing Mostra disegno - + Toggle KeepUpdated Attiva o disattiva aggiornamento automatico @@ -1121,24 +1306,34 @@ Fare clic per aggiornare il testo - + New Leader Line - New Leader Line + Nuova linea guida - + Edit Leader Line - Edit Leader Line + Modifica la linea guida Rich text creator - Rich text creator + Editor di Testi Avanzato RTF - + Rich text editor - Rich text editor + Editor di Testi Avanzato + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Dimensioni - + Arrow Style Stile delle frecce @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Aggiungi unità al testo della dimensione Dimension text color - Dimension text color + Colore del testo della dimensione Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Carattere da utilizzare per indicare la dimensione del diametro Use system setting for decimal places. - Use system setting for decimal places. + Usa l'impostazione di sistema per i decimali. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Numero di decimali se non si utilizza il parametro "decimali globali" - + Dimension font size in units Dimensione del carattere, in unità - + Dimension arrowhead size in units Dimensione della freccia, in unità - + Default Format - Default Format + Formato predefinito - + Custom format for Dimension text - Custom format for Dimension text + Formato personalizzato per il testo della dimensione - + Decorations Decorazioni - + Color for centerlines - Color for centerlines + Colore per le "linee di centro" - + Adjusts size of vertices in drawing Regola la dimensione dei vertici nel disegno - + Vertex Scale Scala del vertice - + Round or Square outline in Detail view - Round or Square outline in Detail view + Arrotonda o Squadra il contorno in vista Dettaglio - + Round Rotondo - + Square Quadrato - + Section Line Style Stile della linea di sezione - + Center Line Style Stile della linea di centro - + Matting Style Stile del tappeto - + Line type for centerlines - Line type for centerlines + Tipo di linea per le "linee di centro" - - + + NeverShow Non mostrare - + Line color for sectionlines - Line color for sectionlines + Colore linea per le "linee di sezione" - + Line Group Name Nome del gruppo di linee - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Nome dell'elemento nel file CSV LineGroup - + Vertex Color Colore del vertice - + Vertex display color - Vertex display color + Colore di visualizzazione dei vertici - - + + Dash A tratti - - + + Dot Punto - - + + DashDot Tratto punto - - + + DashDotDot Tratto punto punto - - + + Solid Solido - + Center Line Color Colore della linea di centro - + Section Line Color Colore della linea di sezione @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Esporta SVG - + Toggle &Keep Updated Attiva o disattiva l'aggiornamento automatico - + Toggle &Frames Attiva o disattiva la struttura - + Export DXF - Export DXF + Esporta in DXF - + Export PDF Esporta in formato PDF - + Different orientation Orientamento diverso - + The printer uses a different orientation than the drawing. Do you want to continue? La stampante utilizza un orientamento diverso rispetto al disegno. Si desidera continuare? - - + + Different paper size Formato carta diverso - - + + The printer uses a different paper size than the drawing. Do you want to continue? La stampante utilizza un formato di carta diverso rispetto al disegno. Si desidera continuare? - + Opening file failed Apertura del file non riuscita - + Can not open file %1 for writing. Impossibile aprire il file %1 per la scrittura. - + Save Dxf File Salva il file DXF - + Dxf (*.dxf) DXF (*. dxf) - + Selected: Selezionato: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Pagina di disegno: - + exported from FreeCAD document: esportato dal documento FreeCAD: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Freccia + + + + Dot + Punto + + + + Start Symbol + Simbolo iniziale + + + + Symbol: + Symbol: + + + + Value: + Valore: + + + + Circular + Circular + + + + None + Nessuno + + + + Triangle + Triangolo + + + + Inspection + Inspection + + + + Hexagon + Esagono + + + + Square + Quadrato + + + + Rectangle + Rettangolo + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Vista base + + + + Elements + Elementi + + + + Vertical + Verticale + + + + Horizontal + Orizzontale + + + + Aligned + Aligned + + + + Color + Colore + + + + Weight + Peso + + + + Style + Stile + + + + NoLine + Nessuna Linea + + + + Solid + Solido + + + + Dash + A tratti + + + + Dot + Punto + + + + DashDot + Tratto punto + + + + DashDotDot + Tratto punto punto + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Vista base + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Click sinistro per impostare un punto + + + + In progress edit abandoned. Start over. + Modifica in corso abbandonata. Ricominciare. + + TechDrawGui::TaskGeomHatch @@ -1797,135 +2211,141 @@ Do you want to continue? Leader Line - Leader Line + Linea guida Base View - Base View + Vista base - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Simbolo iniziale - - + + No Symbol - No Symbol + Nessun simbolo - - + + Filled Triangle - Filled Triangle + Triangolo pieno - - + + Open Triangle - Open Triangle + Triangolo aperto - - + + Tick Tratto - - - + + + Dot Punto - - + + Open Circle - Open Circle + Cerchio aperto - + + + Fork + Fork + + + End Symbol - End Symbol + Simbolo finale - + Color Colore - + Weight - Weight + Peso - + Style Stile - + NoLine - NoLine + Nessuna Linea - + Solid Solido - + Dash A tratti - + DashDot Tratto punto - + DashDotDot Tratto punto punto - - + + Pick a starting point for leader line - Pick a starting point for leader line + Scegli un punto di partenza per la linea guida - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Clicca e trascina i marcatori per regolare la linea guida - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Click sinistro per impostare un punto - + Press OK or Cancel to continue - Press OK or Cancel to continue + Premere OK o Annulla per continuare - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Modifica in corso abbandonata. Ricominciare. @@ -2150,27 +2570,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + Blocco di testo Max Width - Max Width + Larghezza massima Base Feature - Base Feature + Funzione di base Show Frame - Show Frame + Mostra la struttura Start Rich Text Editor - Start Rich Text Editor + Avvia l'editor di testo avanzato @@ -2286,4 +2706,28 @@ Do you want to continue? Valore: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm index da8be9da0c..83e1fbc7b7 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index 821c825ad8..279a290903 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation 注釈を挿入 @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane 断面平面を挿入 - + Inserts a view of a Section Plane from Arch Workbench Arch ワークベンチから断面平面のビューを挿入 @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group クリップグループを挿入 @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup クリップグループからビューを削除 - + Remove a View from Clip group クリップグループからビューを削除 @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group クリップグループにビューを追加 - + Add a View to Clip group クリップグループにビューを追加 - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object ドラフトワークベンチオブジェクトを挿入 - + Insert a View of a Draft Workbench object ドラフトワークベンチオブジェクトのビューを挿入 @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File ファイル - + Export page as SVG ページをSVGとしてエクスポート - + Export a page to an SVG file ページをSVGファイルにエクスポート @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File ファイル - + Export page as DXF ページをDXFとしてエクスポート - + Export a page to a DXF file ページをDXFファイルにエクスポート - + Save Dxf File Dxf ファイルを保存 - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + ビューに線を追加 CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry 寸法を3Dジオメトリーとリンク - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension 新しい3点角度寸法を挿入 @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension 新しい角度寸法を挿入 @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + 新しい吹き出しを挿入 CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension 新しい直径寸法を挿入 - + Insert a new diameter dimension feature 新しい直径寸法フィーチャーを挿入 @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension 新しい水平寸法を挿入 - + Insert a new horizontal distance dimension 新しい水平距離寸法を挿入 @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension 新しい垂直寸法を挿入 - + Insert a new vertical distance dimension 新しい垂直距離寸法を挿入 @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension 新しい長さ寸法を挿入 @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template テンプレートを使用して新しいページを挿入 - + Select a Template File テンプレートファイルを選択 - + Template (*.svg *.dxf) テンプレート (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page 新しいデフォルトページを挿入 @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page ページにビューを挿入 @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View 詳細ビューを挿入 @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page ページに断面ビューを挿入 @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group 投影グループの挿入 - + Insert multiple linked views of drawable object(s) 描画オブジェクトの複数のリンクされたビューを挿入 + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + リッチテキストの注釈を追加 CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view スプレッドシートビューを挿入 - + Inserts a view of a selected spreadsheet 選択したスプレッドシートのビューを挿入 @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol SVG 記号を挿入 - + Insert symbol from a svg file SVG ファイルから記号を挿入 @@ -555,38 +660,38 @@ Save changes - Save changes + 変更を保存 Close editor - Close editor + エディターを閉じる Paragraph formatting - Paragraph formatting + 段落フォーマット Undo (CTRL+Z) - Undo (CTRL+Z) + 元に戻す (CTRL+Z) Undo - Undo + 元に戻す Redo - Redo + やり直す Cut (CTRL+X) - Cut (CTRL+X) + 切り取り (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + コピー (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + 貼り付け (CTRL+V) Paste - Paste + 貼り付け Link (CTRL+L) - Link (CTRL+L) + リンク (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + 斜体 (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + 下線 (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + 取り消し線 Strike Out - Strike Out + 取り消し線 Bullet list (CTRL+-) - Bullet list (CTRL+-) + 番号なしリスト (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + 番号付きリスト (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + インデントを減らす (CTRL+,) Decrease indentation - Decrease indentation + インデントを減らす Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + インデントを増す (CTRL+.) Increase indentation - Increase indentation + インデントを増やす Text foreground color - Text foreground color + 文字表示色 Text background color - Text background color + 文字背景色 @@ -712,188 +817,201 @@ More functions - More functions + 他の機能 - + Standard 標準 - + Heading 1 - Heading 1 + 見出し 1 - + Heading 2 - Heading 2 + 見出し 2 - + Heading 3 - Heading 3 + 見出し 3 - + Heading 4 - Heading 4 + 見出し 4 - + Monospace - Monospace + 固定スペース - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + 文字フォーマットを削除 + + + + Remove all formatting + 全てのフォーマットを削除 + + + Edit document source - Edit document source + ドキュメント ソースを編集 - + Document source - Document source + ドキュメント ソース - + Create a link - Create a link + リンクを作成 - + Link URL: - Link URL: + リンク先のURL: - + Select an image - Select an image + 画像を選択 - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; すべてのファイル (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection 誤った選択 - - + + No Shapes or Groups in this selection この選択にはシェイプまたはグループがありません - - + + Select at least 1 DrawViewPart object as Base. ベースとして少なくとも1つのDrawViewPartオブジェクトを選択してください。 - + Select one Clip group and one View. - Select one Clip group and one View. + クリップグループ、ビューをそれぞれ1つ選択してください。 - + Select exactly one View to add to group. - Select exactly one View to add to group. + グループに追加するビューを1つだけ選択してください。 - + Select exactly one Clip group. - Select exactly one Clip group. + クリップグループを1つだけ選択してください。 - + Clip and View must be from same Page. クリップとビューは同じページのものである必要があります。 - + Select exactly one View to remove from Group. - Select exactly one View to remove from Group. + グループから取り除くビューを1つだけ選択してください。 - + View does not belong to a Clip ビューはクリップに属していません。 - + Choose an SVG file to open 開くSVGファイルを選択 - + Scalable Vector Graphic スケーラブル・ベクター・グラフィック - - + + Select at least one object. 少なくとも1つのオブジェクトを選択してください。 - + There is no Section Plane in selection. - There is no Section Plane in selection. + 断面平面が選択されていません。 - + Select exactly one Spreadsheet object. スプレッドシートオブジェクトを1 つだけ選択して下さい。 - + No Drawing View 図面ビューがありません。 - + Open Drawing View before attempting export to SVG. SVGへのエクスポートを試みる前に図面ビューを開きます。 + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -902,54 +1020,74 @@ Can not make a Dimension from this selection - Can not make a Dimension from this selection + この選択対象から寸法を作ることはできません。 - - Selection Warning - 選択の警告 + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - 選択されたエッジはBスプラインです。半径は概算です。 + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - 選択されたエッジはBスプラインです。直径は概算です。 + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension 角度寸法を作成するには2つの直線のエッジが必要です。 - + Need three points to make a 3 point Angle Dimension - Need three points to make a 3 point Angle Dimension + 3点角度寸法の作成には3つの点が必要です。 - + There is no 3D object in your selection 3Dオブジェクトが選択されていません。 - + There are no 3D Edges or Vertices in your selection 3Dエッジまたは頂点が選択されていません。 - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ 誤った選択です。 - - + + Select an object first 最初にオブジェクトを選択してください - - + + Too many objects selected 選択されているオブジェクトが多すぎます。 - - + + Create a page first. 最初にページを作成してください - - + + No View of a Part in selection. - No View of a Part in selection. + パートのビューが選択されていません。 - + No Feature with Shape in selection. - No Feature with Shape in selection. + シェイプのあるフィーチャーが選択されていません。 - - + + + + + + + + Task In Progress - Task In Progress + 実行中のタスク - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + アクテイブなタスクタイアログを閉じて再度実行してください。 - - + + + + + Selection Error - Selection Error + 選択エラー - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + 引き出し線をアタッチできません。ベースビューが選択されていません。 - + + You must select a base View for the line. - You must select a base View for the line. + 線のためのベースビューを選択する必要があります。 + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ 1ページだけ選択 - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) すべてのファイル (*.*) - + Export Page As PDF ページをPDFとしてエクスポート - + SVG (*.svg) SVG (*.svg) - + Export page as SVG ページをSVGとしてエクスポート - + FreeCAD SVG Export FreeCAD SVG エクスポート - + Show drawing 図面を表示します - + Toggle KeepUpdated KeepUpdatedを切り替え @@ -1121,24 +1306,34 @@ クリックしてテキストをアップデート - + New Leader Line - New Leader Line + 新しい引き出し線 - + Edit Leader Line - Edit Leader Line + 引き出し線を編集 Rich text creator - Rich text creator + リッチテキストクリエイター - + Rich text editor - Rich text editor + リッチテキストエディタ + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ 寸法 - + Arrow Style 矢印のスタイル @@ -1186,7 +1381,7 @@ TechDraw Dimensions - TechDraw Dimensions + TechDraw 寸法 @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + 寸法テキストに単位を追加 Dimension text color - Dimension text color + 寸法の文字色 Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + 直径寸法を表すの使用する文字 Use system setting for decimal places. - Use system setting for decimal places. + 小数点設定にシステムの設定を使用 - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + 小数点の全体設定を使用しない場合の小数点以下の桁数 - + Dimension font size in units 寸法フォントのサイズ - + Dimension arrowhead size in units 寸法矢印のサイズ - + Default Format - Default Format + デフォルトフォーマット - + Custom format for Dimension text - Custom format for Dimension text + 寸法テキスト用のカスタムフォーマット - + Decorations 装飾 - + Color for centerlines - Color for centerlines + 中心線の色 - + Adjusts size of vertices in drawing 図面での頂点の大きさを調整する - + Vertex Scale 頂点のスケール - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round 丸め - + Square 正方形 - + Section Line Style 切断線のスタイル - + Center Line Style 主線のスタイル - + Matting Style マットのスタイル - + Line type for centerlines Line type for centerlines - - + + NeverShow 表示しない - + Line color for sectionlines Line color for sectionlines - + Line Group Name ライングループ名 - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color 頂点の色 - + Vertex display color Vertex display color - - + + Dash 破線 - - + + Dot 点 - - + + DashDot 一点鎖線 - - + + DashDotDot 二点鎖線 - - + + Solid ソリッド - + Center Line Color 主線の色 - + Section Line Color 切断線の色 @@ -1476,7 +1676,7 @@ TechDraw General - TechDraw General + TechDraw 全体 @@ -1621,7 +1821,7 @@ Editable Text Marker Size - Editable Text Marker Size + 編集可能テキストのマーカーサイズ @@ -1631,7 +1831,7 @@ Size of editable text marker in Templates (green dot). - Size of editable text marker in Templates (green dot). + テンプレートの編集可能テキストマーカー (緑のドット) のサイズ @@ -1642,77 +1842,77 @@ TechDrawGui::MDIViewPage - + &Export SVG &SVGをエクスポート - + Toggle &Keep Updated 自動更新を切り替え(&K) - + Toggle &Frames フレームを切り替え(&F) - + Export DXF - Export DXF + DXFをエクスポート - + Export PDF PDFファイル形式でエクスポート - + Different orientation 異なる向き - + The printer uses a different orientation than the drawing. Do you want to continue? プリンターでは、図面と異なる印刷方向を使用します。続行しますか？ - - + + Different paper size 別の用紙サイズ - - + + The printer uses a different paper size than the drawing. Do you want to continue? プリンターでは、図面とは異なる用紙サイズを使用します。 続行しますか？ - + Opening file failed ファイルを開けませんでした。 - + Can not open file %1 for writing. 書き込み用ファイル %1 を開くことができません。 - + Save Dxf File Dxf ファイルを保存 - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 選択: @@ -1720,16 +1920,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: 図面ページ: - + exported from FreeCAD document: FreeCADドキュメントからエクスポート: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + 矢印 + + + + Dot + 点 + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + 値: + + + + Circular + Circular + + + + None + なし + + + + Triangle + 正三角形 + + + + Inspection + Inspection + + + + Hexagon + 正六角形 + + + + Square + 正方形 + + + + Rectangle + 四角形 + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + ベースビュー + + + + Elements + 要素 + + + + Vertical + 垂直方向 + + + + Horizontal + 水平方向 + + + + Aligned + Aligned + + + + Color + 色 + + + + Weight + Weight + + + + Style + スタイル + + + + NoLine + NoLine + + + + Solid + ソリッド + + + + Dash + 破線 + + + + Dot + 点 + + + + DashDot + 一点鎖線 + + + + DashDotDot + 二点鎖線 + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + ベースビュー + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + 左クリックで点を設定 + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1798,133 +2212,139 @@ Do you want to continue? Leader Line - Leader Line + 引き出し線 Base View - Base View + ベースビュー - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick 目盛 - - - + + + Dot 点 - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color 色 - + Weight Weight - + Style スタイル - + NoLine NoLine - + Solid ソリッド - + Dash 破線 - + DashDot 一点鎖線 - + DashDotDot 二点鎖線 - - + + Pick a starting point for leader line - Pick a starting point for leader line + 引き出し線の始点をピック - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + マーカーをクリック、ドラッグして引き出し線を調整 - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + 左クリックで点を設定 - + Press OK or Cancel to continue - Press OK or Cancel to continue + OK またはキャンセルを押すと続行します - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2151,27 +2571,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + リッチテキスト注釈ブロック Max Width - Max Width + 最大幅 Base Feature - Base Feature + ベースフィーチャー Show Frame - Show Frame + フレームを表示 Start Rich Text Editor - Start Rich Text Editor + リッチテキストエディタを開始 @@ -2287,4 +2707,28 @@ Do you want to continue? 値: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm index 53e10232f0..747d785c1b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts index 5de37ceecf..5e15d983a3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fichier - + Export page as SVG Export page as SVG - + Export a page to an SVG file Exporter une page vers un fichier SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fichier - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Tizeɣt - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Sélection invalide - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Choisir un fichier SVG à ouvrir - + Scalable Vector Graphic Graphique Vectoriel Adaptable (Svg) - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Merci de sélectionner un seul objet Spreadsheet - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Créez d'abord une page. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Afficher la mise en plan - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensions - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Carré - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Point - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Solide - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Exporter vers PDF - + Different orientation Orientation différente - + The printer uses a different orientation than the drawing. Do you want to continue? L'imprimante utilise une orientation différente que le dessin. Voulez-vous continuer ? - - + + Different paper size Format de papier différent - - + + The printer uses a different paper size than the drawing. Do you want to continue? L'imprimante utilise un format de papier différent que le dessin. Voulez-vous continuer ? - + Opening file failed L'ouverture du fichier a échoué - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Sélectionné: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Flèche + + + + Dot + Point + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Ula yiwen + + + + Triangle + Triangle + + + + Inspection + Inspection + + + + Hexagon + Hexagone + + + + Square + Carré + + + + Rectangle + Rectangle + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Éléments + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Ini + + + + Weight + Weight + + + + Style + Style + + + + NoLine + NoLine + + + + Solid + Solide + + + + Dash + Dash + + + + Dot + Point + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Point - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Ini - + Weight Weight - + Style Style - + NoLine NoLine - + Solid Solide - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm index 6ceeb75277..0b92ad2f9b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts index 6ab4add6a1..480a21d064 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File 파일 - + Export page as SVG Export page as SVG - + Export a page to an SVG file SVG 파일로 페이지 내보내기 @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File 파일 - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard 표준 - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection 잘못 된 선택 - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open 불러올 SVG 파일을 선택하세요 - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Select exactly one Spreadsheet object. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Create a page first. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing 드로잉 보기 - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensions - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square 사각형 - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot 점 - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid 복합체 - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF PDF 내보내기 - + Different orientation Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size 다른 용지 크기 - - + + The printer uses a different paper size than the drawing. Do you want to continue? The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed Opening file failed - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 선택: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + 화살표 + + + + Dot + 점 + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + 없음 + + + + Triangle + 삼각형 + + + + Inspection + Inspection + + + + Hexagon + 육각형 + + + + Square + 사각형 + + + + Rectangle + 사각형 + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + 요소 + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + 색상 + + + + Weight + Weight + + + + Style + 스타일 + + + + NoLine + NoLine + + + + Solid + 복합체 + + + + Dash + Dash + + + + Dot + 점 + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot 점 - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color 색상 - + Weight Weight - + Style 스타일 - + NoLine NoLine - + Solid 복합체 - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm index 9b68a558cb..7de0ee16e4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts index 1401682e50..c955ad31c2 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Techniniai brėžiniai - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw Techniniai brėžiniai - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw Techniniai brėžiniai - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw Techniniai brėžiniai - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw Techniniai brėžiniai - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw Techniniai brėžiniai - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Techniniai brėžiniai + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Techniniai brėžiniai + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + Techniniai brėžiniai + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Failas - + Export page as SVG Export page as SVG - + Export a page to an SVG file Eksportuoti lapą į SVG failą @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Failas - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Techniniai brėžiniai + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw Techniniai brėžiniai - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw Techniniai brėžiniai - - + + Link a dimension to 3D geometry Susieti matmenis su 3D geometrija - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Techniniai brėžiniai - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Techniniai brėžiniai + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw Techniniai brėžiniai - - + + Insert a new angle dimension Įterpti naują kampo matmenį @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw Techniniai brėžiniai - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw Techniniai brėžiniai - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw Techniniai brėžiniai - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw Techniniai brėžiniai - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Įterpti naują vertikalaus atstumo matmenį @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw Techniniai brėžiniai - - + + Insert a new length dimension Įterpti naują ilgio matmenį @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw Techniniai brėžiniai + - Insert new Page using Template Insert new Page using Template - + Select a Template File Pasirinkti šablono rinkmeną - + Template (*.svg *.dxf) Šablonas (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw Techniniai brėžiniai + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw Techniniai brėžiniai + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw Techniniai brėžiniai + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw Techniniai brėžiniai + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw Techniniai brėžiniai - + Insert Projection Group Įterpti projekcijos grupę - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + Techniniai brėžiniai + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw Techniniai brėžiniai - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw Techniniai brėžiniai - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw Techniniai brėžiniai - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Įprastinis - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Netinkama pasirinktis - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Papildomas vaizdas ir rodinys turi būti tame pačiame lape. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Rodinys nepriklauso papildomam vaizdui/pjūviui - + Choose an SVG file to open Pasirinkite SVG failą atvėrimui - + Scalable Vector Graphic SVG vektorinis grafikas - - + + Select at least one object. Pažymėkite bent vieną objektą. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Pasirinkite tik vieną skaičiuoklės objektą. - + No Drawing View Nėra brėžinio vaizdo - + Open Drawing View before attempting export to SVG. Atidaryti brėžinio projekciją prieš bandant eksportuoti į SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Nepasirinkote jokio 3D objekto - + There are no 3D Edges or Vertices in your selection Nepasirinkote jokių 3D objekto kraštinių ar viršūnių - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Netinkamas pasirinkimas - - + + Select an object first Pirmiausia pasirinkite objektą - - + + Too many objects selected Pasirinkta per daug objektų - - + + Create a page first. Pirmiausia sukurkite puslapį. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG eksportavimas - + Show drawing Rodyti techninį brėžinį - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Matmenys - + Arrow Style Rodyklių stilius @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Apdaila - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Apvalus - + Square Kvadratas - + Section Line Style Pjūvio linijų stilius - + Center Line Style Centro linijų stilius - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow Niekada nerodyti - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color - Vertex Color + Viršūnės spalva - + Vertex display color - Vertex display color + Vaizduojamos viršūnės spalva - - + + Dash Brūkšnelis - - + + Dot Taškas - - + + DashDot Brūkšnelis taškelis - - + + DashDotDot Brūkšnelis taškelis taškelis - - + + Solid - Pilnaviduris kūnas + Pilnaviduris daiktas - + Center Line Color Centro linijos spalva - + Section Line Color Pjūvio linijos spalva @@ -1436,7 +1636,7 @@ Solid - Pilnaviduris kūnas + Pilnaviduris daiktas @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG & Eksportuoti SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Eksportuoti į PDF - + Different orientation Kitokia padėtis - + The printer uses a different orientation than the drawing. Do you want to continue? Spausdintuvas naudoja kitokią lapo padėtį nei brėžinys. Ar norite tęsti? - - + + Different paper size Kitoks popieriaus dydis - - + + The printer uses a different paper size than the drawing. Do you want to continue? Spausdintuvas naudoja kitokio dydžio lapą, nei brėžinys. Ar norite tęsti? - + Opening file failed Failo atidarymas nepavyko - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Pasirinktas: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Rodyklė + + + + Dot + Taškas + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Reikšmė: + + + + Circular + Circular + + + + None + Joks + + + + Triangle + Trikampis + + + + Inspection + Inspection + + + + Hexagon + Šešiakampis + + + + Square + Kvadratas + + + + Rectangle + Stačiakampis + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementai + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Spalva + + + + Weight + Weight + + + + Style + Stilius + + + + NoLine + NoLine + + + + Solid + Pilnaviduris daiktas + + + + Dash + Brūkšnelis + + + + Dot + Taškas + + + + DashDot + Brūkšnelis taškelis + + + + DashDotDot + Brūkšnelis taškelis taškelis + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Taškas - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Spalva - + Weight Weight - + Style Stilius - + NoLine NoLine - + Solid - Pilnaviduris kūnas + Pilnaviduris daiktas - + Dash Brūkšnelis - + DashDot Brūkšnelis taškelis - + DashDotDot Brūkšnelis taškelis taškelis - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Reikšmė: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm index 412c74538c..f9c11d92d9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 1fd4da6634..8a5b3cfcff 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Voeg een annotatie in @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Sectievlak maken - + Inserts a view of a Section Plane from Arch Workbench Voegt een aanzicht van een sectie vlak toe van de Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Voeg aanzicht toe aan Clip groep - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Voeg DraftWB object toe - + Insert a View of a Draft Workbench object Voeg een aanzicht van een Draft Workbench object toe @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Bestand - + Export page as SVG Exporteren als SVG - + Export a page to an SVG file Een pagina naar een SVG-bestand exporteren @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Bestand - + Export page as DXF Exporteer pagina als DXF - + Export a page to a DXF file Exporteer een pagina naar een DXF-bestand - + Save Dxf File Bewaar Dxf-bestand - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Plaats een nieuwe horizontale maatlijn - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Plaats een nieuwe verticale maatlijn - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Sjabloon (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Standaard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Verkeerde selectie - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Selecteer precies één Aanzicht om aan groep toe te voegen. - + Select exactly one Clip group. Selecteer precies één Clip groep. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Selecteer precies één Aanzicht om van groep te verwijderen. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Kies een SVG-bestand om te openen - + Scalable Vector Graphic Schaalbare vectorafbeelding - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. Er is geen Sectie-vlak in aangegeven selectie. - + Select exactly one Spreadsheet object. Selecteer exact één Spreadsheet-object. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension 3 ponten nodig voor het aanmaken van een Hoek dimensie - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Maak eerst een pagina. - - + + No View of a Part in selection. Geen aanzicht van een onderdeel in de selectie. - + No Feature with Shape in selection. Geen functie met Vorm in Selectie. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Alle bestanden (*.*) - + Export Page As PDF Exporteren als PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporteren als SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Toon tekening - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensies - + Arrow Style Pijl type @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Versieringen - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Rond - + Square Vierkant - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot punt - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Solid - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,77 +1842,77 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Exporteren als PDF - + Different orientation Verschillende oriëntatie - + The printer uses a different orientation than the drawing. Do you want to continue? De printer gebruikt een andere richting dan de tekening. Wil je doorgaan? - - + + Different paper size Ander papierformaat - - + + The printer uses a different paper size than the drawing. Do you want to continue? De printer gebruikt een ander papierfromaat dan de tekening. Wilt u toch doorgaan? - + Opening file failed Bestand openen mislukt - + Can not open file %1 for writing. Kan bestand '%1' niet openen om te schrijven. - + Save Dxf File Bewaar Dxf-bestand - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Geselecteerd: @@ -1720,16 +1920,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Tekening pagina: - + exported from FreeCAD document: exporteer van FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Pijl + + + + Dot + punt + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Waarde: + + + + Circular + Circular + + + + None + Geen + + + + Triangle + Driehoek + + + + Inspection + Inspection + + + + Hexagon + Zeshoek + + + + Square + Vierkant + + + + Rectangle + Rechthoek + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementen + + + + Vertical + Verticaal + + + + Horizontal + Horizontaal + + + + Aligned + Aligned + + + + Color + Kleur + + + + Weight + Weight + + + + Style + Stijl + + + + NoLine + NoLine + + + + Solid + Solid + + + + Dash + Dash + + + + Dot + punt + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1807,124 +2221,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Vink - - - + + + Dot punt - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Kleur - + Weight Weight - + Style Stijl - + NoLine NoLine - + Solid Solid - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2287,4 +2707,28 @@ Do you want to continue? Waarde: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm index 83fe20e0dc..f6d71e07ce 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts index 10911a1c7b..db0c151803 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File File - + Export page as SVG Export page as SVG - + Export a page to an SVG file Eksportere en side til en SVG-fil @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File File - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Standard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Feil valg - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Velg en SVG-fil å åpne - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Select exactly one Spreadsheet object. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Lag en side først. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Alle filer (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Vis tegning - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensions - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Firkant - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Dot - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Solid - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Eksporter PDF - + Different orientation Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size Different paper size - - + + The printer uses a different paper size than the drawing. Do you want to continue? Skriveren bruker en annen papirstørrelse enn tegningen. Vil du fortsette? - + Opening file failed Opening file failed - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Valgt: @@ -1721,16 +1921,230 @@ Vil du fortsette? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Arrow + + + + Dot + Dot + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Ingen + + + + Triangle + Trekant + + + + Inspection + Inspection + + + + Hexagon + Sekskant + + + + Square + Firkant + + + + Rectangle + Rektangel + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elements + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Color + + + + Weight + Weight + + + + Style + Stil + + + + NoLine + NoLine + + + + Solid + Solid + + + + Dash + Dash + + + + Dot + Dot + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Vil du fortsette? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Dot - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Color - + Weight Weight - + Style Stil - + NoLine NoLine - + Solid Solid - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Vil du fortsette? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm index 7c934336d2..dbbe71e747 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index a3edec33ce..c2a8e69d11 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Wstaw adnotację @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Wstaw grupę Clip @@ -50,18 +66,18 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Usuń widok z grupy Clip - + Remove a View from Clip group Usuń widok z grupy Clip @@ -69,35 +85,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Dodaj widok do grupy Clip - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -105,17 +168,17 @@ CmdTechDrawExportPage - + File Plik - + Export page as SVG Wyeksportuj stronę jako SVG - + Export a page to an SVG file Eksport strony do pliku SVG @@ -123,31 +186,45 @@ CmdTechDrawExportPageDxf - + File Plik - + Export page as DXF Wyeksportuj stronę jako DXF - + Export a page to a DXF file Wyeksportuj stronę do pliku DXF - + Save Dxf File Zapisz plik Dxf - + Dxf (*.dxf) DXF (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -180,13 +257,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -194,27 +271,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Połącz wymiar z geometrią 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Wstaw nowy wymiar kątowy 3-punktowy @@ -222,13 +313,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Wstaw nowy wymiar kątowy @@ -236,13 +327,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -250,17 +341,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Wstaw nowy wymiar średnicy - + Insert a new diameter dimension feature Wstaw nową funkcję wymiaru średnicy @@ -286,17 +377,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Wstaw nowy wymiar horyzontalny - + Insert a new horizontal distance dimension Wstaw nowy wymiar odległości horyzontalnej @@ -304,17 +395,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Wstaw nowy wymiar pionowy - + Insert a new vertical distance dimension Wstaw nowy wymiar pionowo dystansowy @@ -350,13 +441,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Wstaw nowy wymiar długości @@ -364,23 +455,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Wstaw nową stronę przy użyciu szablonu - + Select a Template File Wybierz plik szablonu - + Template (*.svg *.dxf) Szablon (*.svg *.dxf) @@ -388,13 +479,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Wstaw nową domyślną stronę rysunku @@ -416,13 +507,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Wstaw widok na stronę @@ -430,13 +521,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Wstaw widok szczegółu @@ -444,13 +535,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Wstaw widok sekcji na stronę @@ -458,21 +549,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Wstaw grupę projekcyjną - + Insert multiple linked views of drawable object(s) Wstaw wiele połączonych widoków rysowanych elementów + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -490,13 +595,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -504,17 +609,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Wstaw widok arkuszu - + Inserts a view of a selected spreadsheet Wstawia widok wybranego arkusza @@ -522,17 +627,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Wstaw symbol SVG - + Insert symbol from a svg file Wstaw symbol z pliku SVG @@ -716,72 +821,77 @@ More functions - + Standard Standardowy - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -789,112 +899,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Niewłaściwy wybór - - + + No Shapes or Groups in this selection Brak w zaznaczeniu kształtu lub grupy do kreskowania - - + + Select at least 1 DrawViewPart object as Base. Wybierz przynajmniej 1 obiekt DrawViewPart jako podstawę. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Klip i widok muszą byś z tej samej strony. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Widok nie należy do klipu - + Choose an SVG file to open Wybierz plik SVG do otwarcia - + Scalable Vector Graphic Skalowalna grafika wektorowa - - + + Select at least one object. Wybierz przynajmniej jeden obiekt. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Wybierz dokładnie jeden obiekt Arkusza. - + No Drawing View Brak widoku rysunku - + Open Drawing View before attempting export to SVG. Otwórz widok rysunku przed próbą eksportu do SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -907,50 +1025,70 @@ - - Selection Warning - Ostrzeżenie wyboru + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Wybrana krawędź to B-spline. Promień będzie przybliżony. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Wybrana krawędź to B-spline. Średnica będzie przybliżona. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Potrzeba dwóch prostych krawędzi, aby uzyskać wymiar kątowy - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection W Twoim obszarze nie ma obiektu 3D - + There are no 3D Edges or Vertices in your selection Nie ma krawędzi 3D lub wierzchołków w zaznaczeniu - - - - - - - - + + + + + + + + @@ -958,62 +1096,109 @@ Niewłaściwy wybór - - + + Select an object first Najpierw wybierz obiekt - - + + Too many objects selected Wybrałeś zbyt wiele obiektów - - + + Create a page first. Najpierw stwórz stronę. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1076,43 +1261,43 @@ Wybierz dokładnie 1 stronę. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Wszystkie pliki (*.*) - + Export Page As PDF Wyeksportuj stronę jako PDF - + SVG (*.svg) SVG(*.svg) - + Export page as SVG Wyeksportuj stronę jako SVG - + FreeCAD SVG Export Eksport FreeCAD SVG - + Show drawing Pokaż rysunek - + Toggle KeepUpdated Włącz KeepUpdated @@ -1122,12 +1307,12 @@ Kliknij, aby zaktualizować tekst - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1137,10 +1322,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1150,7 +1345,7 @@ Wymiary - + Arrow Style Styl grotu @@ -1250,154 +1445,159 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Rozmiar czcionki wymiaru w jednostkach - + Dimension arrowhead size in units Rozmiar grotu strzałki wymiaru w jednostkach - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Dekoracje - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Dostosowuje rozmiar wierzchołków na rysunku - + Vertex Scale Skaluj wierzchołki - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Okrągły - + Square Kwadrat - + Section Line Style Styl linii przekroju - + Center Line Style Styl linii środkowej - + Matting Style Styl matowania - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Nazwa grupy linii - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Kolor wierzchołków - + Vertex display color Vertex display color - - + + Dash Kreska - - + + Dot Kropka - - + + DashDot KreskaKropka - - + + DashDotDot KreskaKropkaKropka - - + + Solid Bryła - + Center Line Color Kolor linii środkowej - + Section Line Color Kolor linii przekroju @@ -1645,76 +1845,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Eksport SVG - + Toggle &Keep Updated Włącz/wyłącz &automatyczną aktualizacje - + Toggle &Frames Włącz/wyłącz &Ramki - + Export DXF Export DXF - + Export PDF Eksportuj do PDF - + Different orientation Inna orientacja - + The printer uses a different orientation than the drawing. Do you want to continue? Drukarka używa inną orientacje strony niż rysunek. Czy chcesz kontynuować? - - + + Different paper size Inny rozmiar papieru - - + + The printer uses a different paper size than the drawing. Do you want to continue? Drukarka używa innego rozmiaru papieru niż rysunek. Czy chcesz kontynuować? - + Opening file failed Otwarcie pliku nie powiodło się - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Zapisz plik Dxf - + Dxf (*.dxf) DXF (*.dxf) - + Selected: Wybrane: @@ -1722,16 +1922,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Strona rysunku: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Strzałka + + + + Dot + Kropka + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Wartość: + + + + Circular + Circular + + + + None + Żaden + + + + Triangle + Trójkąt + + + + Inspection + Inspection + + + + Hexagon + Sześciokąt + + + + Square + Kwadrat + + + + Rectangle + Prostokąt + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementy + + + + Vertical + Pionowa + + + + Horizontal + Pozioma + + + + Aligned + Aligned + + + + Color + Kolor + + + + Weight + Weight + + + + Style + Styl + + + + NoLine + NoLine + + + + Solid + Bryła + + + + Dash + Kreska + + + + Dot + Kropka + + + + DashDot + KreskaKropka + + + + DashDotDot + KreskaKropkaKropka + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1809,124 +2223,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Odhacz - - - + + + Dot Kropka - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Kolor - + Weight Weight - + Style Styl - + NoLine NoLine - + Solid Bryła - + Dash Kreska - + DashDot KreskaKropka - + DashDotDot KreskaKropkaKropka - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2289,4 +2709,28 @@ Do you want to continue? Wartość: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm index 747a749f33..112d5aa66c 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index 562240bfe8..96d5c3236a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert Annotation Inserir anotação @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a Section Plane Inserir um plano de corte - + Inserts a view of a Section Plane from Arch Workbench Insere uma vista de um plano de corte da bancada de trabalho Arquitetura @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert Clip group Inserir grupo de recorte @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw (Desenhos Técnicos) - + Remove View from ClipGroup Remover vista do grupo de recorte - + Remove a View from Clip group Remover uma vista do grupo de recorte @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw (Desenhos Técnicos) - + Add View to Clip group Adicionar uma vista ao grupo de recorte - + Add a View to Clip group Adicionar uma vista ao grupo de recorte - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw (Desenhos Técnicos) - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw (Desenhos Técnicos) + + + Insert a DraftWB object Insere um objeto da bancada Draft - + Insert a View of a Draft Workbench object Inserir uma vista de um objeto da bancada de trabalho Draft @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Arquivo - + Export page as SVG Exportar página para SVG - + Export a page to an SVG file Exportar página para um arquivo SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Arquivo - + Export page as DXF Exportar página como DXF - + Export a page to a DXF file Exportar uma página para um arquivo DXF - + Save Dxf File Salvar o Arquivo Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw (Desenhos Técnicos) - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw (Desenhos Técnicos) - - + + Link a dimension to 3D geometry Vincular uma cota a uma geometria 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw (Desenhos Técnicos) - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Insert a new 3 point Angle dimension Inserir uma nova cota de ângulo com 3 pontos @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert a new angle dimension Inserir uma nova cota de ângulo @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a new diameter dimension Inserir uma nova cota de diâmetro - + Insert a new diameter dimension feature Inserir um novo recurso de cota de diâmetro @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a new horizontal dimension Inserir uma nova cota horizontal - + Insert a new horizontal distance dimension Inserir uma nova cota de distância horizontal @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a new vertical dimension Inserir uma nova cota vertical - + Insert a new vertical distance dimension Inserir uma nova cota de distância vertical @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert a new length dimension Inserir uma nova cota de comprimento @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw (Desenhos Técnicos) + - Insert new Page using Template Inserir nova Página usando o Modelo - + Select a Template File Selecione um arquivo de modelo - + Template (*.svg *.dxf) Modelo (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw (Desenhos Técnicos) + - Insert new default Page Inserir nova Página padrão @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw (Desenhos Técnicos) + - Insert View in Page Inserir vista na Página @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw (Desenhos Técnicos) + - Insert Detail View Inserir vista de detalhe @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw (Desenhos Técnicos) + - Insert Section View in Page Inserir vista de seção na Página @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Projection Group Inserir grupo de projeção - + Insert multiple linked views of drawable object(s) Inserir varias vistas ligadas dos objeto(s) "desenháveis" + + CmdTechDrawQuadrant + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw (Desenhos Técnicos) - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Spreadsheet view Inserir vista da Planilha - + Inserts a view of a selected spreadsheet Inserir uma vista da Planilha selecionada @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw (Desenhos Técnicos) - + Insert SVG Symbol Inserir símbolo SVG - + Insert symbol from a svg file Inserir o símbolo de um arquivo svg @@ -575,18 +680,18 @@ Undo - Undo + Desfazer Redo - Redo + Refazer Cut (CTRL+X) - Cut (CTRL+X) + Cortar (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Copiar (CTRL+C) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Sublinhado (Ctrl+U) @@ -651,7 +756,7 @@ Strikethrough - Strikethrough + Riscado @@ -661,12 +766,12 @@ Bullet list (CTRL+-) - Bullet list (CTRL+-) + Lista de marcadores (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Lista ordenada (CTRL+=) @@ -691,12 +796,12 @@ Text foreground color - Text foreground color + Define a cor do primeiro plano Text background color - Text background color + Cor de fundo das caixas @@ -712,188 +817,201 @@ More functions - More functions + Mais funções - + Standard Padrão - + Heading 1 - Heading 1 + Título 1 - + Heading 2 - Heading 2 + Título 2 - + Heading 3 - Heading 3 + Título 3 - + Heading 4 - Heading 4 + Título 4 - + Monospace - Monospace + Monoespaçada - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Remover formatação de caracteres + + + + Remove all formatting + Remover todas as formatações + + + Edit document source - Edit document source + Editar fonte de documento - + Document source - Document source + Origem do documento - + Create a link - Create a link + Criar um link - + Link URL: - Link URL: + URL do Link: - + Select an image - Select an image + Selecionar imagem - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todos (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Seleção errada - - + + No Shapes or Groups in this selection Não há formas ou grupos nesta seleção - - + + Select at least 1 DrawViewPart object as Base. Selecione pelo menos 1 objeto DrawViewPart como Base. - + Select one Clip group and one View. - Select one Clip group and one View. + Selecione um grupo de Clip e uma Visão. - + Select exactly one View to add to group. Selecione exatamente uma vista para adicionar ao grupo. - + Select exactly one Clip group. Selecione exatamente um grupo de recorte. - + Clip and View must be from same Page. Recorte e Vista devem estar na mesma página. - + Select exactly one View to remove from Group. Selecione exatamente uma vista para remover do grupo. - + View does not belong to a Clip A Vista não pertence a um Clip - + Choose an SVG file to open Escolha um arquivo SVG para abrir - + Scalable Vector Graphic Gráficos vetoriais escaláveis (Svg) - - + + Select at least one object. Selecione pelo menos um objeto. - + There is no Section Plane in selection. Não há nenhum plano de corte na seleção. - + Select exactly one Spreadsheet object. Selecione exatamente um objeto de planilha. - + No Drawing View Nenhuma Folha de desenho - + Open Drawing View before attempting export to SVG. Abra a folha de desenho antes de tentar a exportação de SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Aviso de seleção + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - A aresta selecionada é uma BSpline. O Raio será aproximado. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - A aresta selecionada é uma BSpline. O diâmetro será aproximado. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension São precisas duas arestas retas para criar uma cota de ângulo - + Need three points to make a 3 point Angle Dimension São necessários três pontos para fazer uma cota de ângulo com 3 pontos - + There is no 3D object in your selection Não há nenhum objeto 3D na sua seleção - + There are no 3D Edges or Vertices in your selection Não existem arestas ou vértices 3D na sua seleção - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Selecção incorrecta - - + + Select an object first Selecione um objeto primeiro - - + + Too many objects selected Demasiados objetos selecionados - - + + Create a page first. Primeiro, crie uma página. - - + + No View of a Part in selection. Nenhuma vista de uma peça na seleção. - + No Feature with Shape in selection. Nenhum objeto com forma na seleção. - - + + + + + + + + Task In Progress - Task In Progress + Tarefa em andamento - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Selecione apenas 1 página. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos os arquivos (*.*) - + Export Page As PDF Exportar página para PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página para SVG - + FreeCAD SVG Export Exportação SVG do FreeCAD - + Show drawing Mostrar o desenho - + Toggle KeepUpdated Alternar atualização automática @@ -1121,12 +1306,12 @@ Clique pra atualizar o texto - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensões - + Arrow Style Estilo de seta @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Tamanho da fonte das dimensões, com unidade - + Dimension arrowhead size in units Tamanho da seta das dimensões, com unidade - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorações - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Ajusta o tamanho dos vértices no desenho - + Vertex Scale Escala dos vértices - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Redondo - + Square Quadrado - + Section Line Style Cor da linha de corte - + Center Line Style Estilo da linha de centro - + Matting Style Estilo de cantos - + Line type for centerlines Line type for centerlines - - + + NeverShow Nunca mostrar - + Line color for sectionlines Line color for sectionlines - + Line Group Name Nome do grupo de linhas - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Cor do vértice - + Vertex display color Vertex display color - - + + Dash Tracejado - - + + Dot Ponto - - + + DashDot Traço Ponto - - + + DashDotDot Traço Ponto Ponto - - + + Solid Sólido - + Center Line Color Cor da linha de centro - + Section Line Color Cor da linha de corte @@ -1642,77 +1842,77 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exportar para SVG - + Toggle &Keep Updated Alternar &manter atualizado - + Toggle &Frames Alternar &Quadros - + Export DXF Export DXF - + Export PDF Exportar PDF - + Different orientation Orientação diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impressora utiliza uma orientação diferente do que o desenho. Deseja continuar? - - + + Different paper size Tamanho de papel diferente - - + + The printer uses a different paper size than the drawing. Do you want to continue? A impressora usa um tamanho de papel diferente do que o desenho. Deseja continuar? - + Opening file failed Falha ao abrir arquivo - + Can not open file %1 for writing. Não é possível abrir o arquivo '%1' para a gravação. - + Save Dxf File Salvar o Arquivo Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Selecionado: @@ -1720,16 +1920,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Folha de desenho: - + exported from FreeCAD document: exportado a partir de um documento FreeCAD: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Seta + + + + Dot + Ponto + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Valor: + + + + Circular + Circular + + + + None + Nenhum + + + + Triangle + Triângulo + + + + Inspection + Inspection + + + + Hexagon + Hexágono + + + + Square + Quadrado + + + + Rectangle + Retângulo + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementos + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Cor + + + + Weight + Weight + + + + Style + Estilo + + + + NoLine + NoLine + + + + Solid + Sólido + + + + Dash + Tracejado + + + + Dot + Ponto + + + + DashDot + Traço Ponto + + + + DashDotDot + Traço Ponto Ponto + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1807,124 +2221,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Diagonal - - - + + + Dot Ponto - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Cor - + Weight Weight - + Style Estilo - + NoLine NoLine - + Solid Sólido - + Dash Tracejado - + DashDot Traço Ponto - + DashDotDot Traço Ponto Ponto - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2287,4 +2707,28 @@ Do you want to continue? Valor: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm index 2b8aeca54b..17fa94ce34 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index c9b92bf200..b74b4b91a6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert Annotation Inserir anotação @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a Section Plane Inserir um plano de corte - + Inserts a view of a Section Plane from Arch Workbench Insere uma vista de um plano de corte da bancada de trabalho Arquitetura @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert Clip group Inserir grupo de recorte @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw (Desenhos Técnicos) - + Remove View from ClipGroup Remover vista do grupo de recorte - + Remove a View from Clip group Remover uma vista do grupo de recorte @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw (Desenhos Técnicos) - + Add View to Clip group Adicionar vista ao grupo de recorte - + Add a View to Clip group Adicionar uma vista ao grupo de recorte - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw (Desenhos Técnicos) - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw (Desenhos Técnicos) + + + Insert a DraftWB object Insere um objeto da bancada Draft - + Insert a View of a Draft Workbench object Inserir uma vista de um objeto da bancada de trabalho Draft @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Ficheiro - + Export page as SVG Exportar folha como SVG - + Export a page to an SVG file Exportar página para um ficheiro SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Ficheiro - + Export page as DXF Exportar folha como DXF - + Export a page to a DXF file Exportar uma folha para um ficheiro DXF - + Save Dxf File Salvar o Ficheiro Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw (Desenhos Técnicos) - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw (Desenhos Técnicos) - - + + Link a dimension to 3D geometry Ligar uma cotagem a uma geometria 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw (Desenhos Técnicos) - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Insert a new 3 point Angle dimension Inserir uma nova cotagem de ângulo com 3 pontos @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert a new angle dimension Inserir uma nova cotagem de ângulo @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a new diameter dimension Inserir uma nova cotagem de diâmetro - + Insert a new diameter dimension feature Inserir um novo objeto de cotagem de diâmetro @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a new horizontal dimension Inserir uma nova cotagem horizontal - + Insert a new horizontal distance dimension Inserir uma nova cotagem de distância horizontal @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert a new vertical dimension Inserir uma nova cotagem vertical - + Insert a new vertical distance dimension Inserir uma nova cotagem de distância vertical @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw (Desenhos Técnicos) - - + + Insert a new length dimension Inserir uma nova cotagem de comprimento @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw (Desenhos Técnicos) + - Insert new Page using Template Inserir nova Folha usando o modelo - + Select a Template File Selecione um Ficheiro de modelo - + Template (*.svg *.dxf) Modelo (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw (Desenhos Técnicos) + - Insert new default Page Inserir nova Folha predefinida @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw (Desenhos Técnicos) + - Insert View in Page Inserir vista na Folha @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw (Desenhos Técnicos) + - Insert Detail View Inserir vista de detalhe @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw (Desenhos Técnicos) + - Insert Section View in Page Inserir vista de seção na Folha @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Projection Group Inserir grupo de projeção - + Insert multiple linked views of drawable object(s) Inserir varias vistas ligadas dos objeto(s) "desenháveis" + + CmdTechDrawQuadrant + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw (Desenhos Técnicos) - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Spreadsheet view Inserir vista de Tabela (folha de cálculo) - + Inserts a view of a selected spreadsheet Inserir uma vista da Tabela (folha de cálculo) selecionada @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw (Desenhos Técnicos) - + Insert SVG Symbol Inserir símbolo SVG - + Insert symbol from a svg file Inserir o símbolo de um ficheiro svg @@ -715,72 +820,77 @@ More functions - + Standard Standard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Seleção errada - - + + No Shapes or Groups in this selection Não há formas ou grupos nesta seleção - - + + Select at least 1 DrawViewPart object as Base. Selecione pelo menos 1 objeto DrawViewPart como Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Selecione exatamente uma vista para adicionar ao grupo. - + Select exactly one Clip group. Selecione exatamente um grupo de recorte. - + Clip and View must be from same Page. Recorte e Vista devem estar na mesma folha. - + Select exactly one View to remove from Group. Selecione exatamente uma vista para remover do grupo. - + View does not belong to a Clip A Vista não pertence a um recorte - + Choose an SVG file to open Escolha um ficheiro SVG para abrir - + Scalable Vector Graphic Gráficos vetoriais escaláveis (Svg) - - + + Select at least one object. Selecione pelo menos um objeto. - + There is no Section Plane in selection. Não há nenhum plano de corte na seleção. - + Select exactly one Spreadsheet object. Selecione apenas um objeto folha de cálculo. - + No Drawing View Nenhuma Folha de desenho - + Open Drawing View before attempting export to SVG. Abra a folha de desenho antes de tentar a exportação de SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Aviso de seleção + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - A aresta selecionada é uma BSpline. O Raio será aproximado. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - A aresta selecionada é uma BSpline. O diâmetro será aproximado. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension São precisas duas arestas retas para criar uma cotagem de ângulo - + Need three points to make a 3 point Angle Dimension São precisos de três pontos para fazer uma cotagem de ângulo com 3 pontos - + There is no 3D object in your selection Não há nenhum objeto 3D na sua seleção - + There are no 3D Edges or Vertices in your selection Não existem arestas ou vértices 3D na sua seleção - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Selecção incorrecta - - + + Select an object first Selecione um objeto primeiro - - + + Too many objects selected Demasiados objetos selecionados - - + + Create a page first. Primeiro, crie uma página. - - + + No View of a Part in selection. Nenhuma vista de uma peça na seleção. - + No Feature with Shape in selection. Nenhum recurso com forma de seleção. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Selecione apenas 1 folha. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos os Ficheiros (*. *) - + Export Page As PDF Exportar folha como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar folha como SVG - + FreeCAD SVG Export Exportação SVG do FreeCAD - + Show drawing Mostrar folha de desenho - + Toggle KeepUpdated Alternar atualização automática @@ -1121,12 +1306,12 @@ Clique para atualizar o texto - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensões - + Arrow Style Estilo de seta @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Tamanho da fonte das cotagem em unidades - + Dimension arrowhead size in units Tamanho da seta das cotagem em unidades - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorações - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Ajusta o tamanho dos vértices em desenho - + Vertex Scale Escala dos vértices - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Redondo - + Square Quadrado - + Section Line Style Estilo da linha de corte - + Center Line Style Estilo de linha de centro - + Matting Style Estilo dos encontros (cantos) - + Line type for centerlines Line type for centerlines - - + + NeverShow NuncaMostrar - + Line color for sectionlines Line color for sectionlines - + Line Group Name Nome do grupo de linhas - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Cor do vértice - + Vertex display color Vertex display color - - + + Dash Tracejado - - + + Dot Ponto - - + + DashDot TraçoPonto - - + + DashDotDot TraçoPontoPonto - - + + Solid Sólido - + Center Line Color Cor da linha de centro - + Section Line Color Cor da linha de corte @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exportar SVG - + Toggle &Keep Updated Alternar &manter atualizado - + Toggle &Frames Alternar &Molduras - + Export DXF Export DXF - + Export PDF Exportar PDF - + Different orientation Orientação diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impressora utiliza uma orientação diferente da folha de desenho. Deseja continuar? - - + + Different paper size Tamanho de papel diferente - - + + The printer uses a different paper size than the drawing. Do you want to continue? A impressora usa um tamanho de papel diferente da folha de desenho. Deseja continuar? - + Opening file failed Falha ao abrir ficheiro - + Can not open file %1 for writing. Não é possível abrir o ficheiro %1 para a escrita. - + Save Dxf File Salvar o Ficheiro Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Selecionado: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Folha de desenho: - + exported from FreeCAD document: exportado documento do FreeCAD: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Flecha + + + + Dot + Ponto + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Valor: + + + + Circular + Circular + + + + None + Nenhum + + + + Triangle + Triângulo + + + + Inspection + Inspection + + + + Hexagon + Hexágono + + + + Square + Quadrado + + + + Rectangle + Retângulo + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementos + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Cor + + + + Weight + Weight + + + + Style + Estilo + + + + NoLine + NoLine + + + + Solid + Sólido + + + + Dash + Tracejado + + + + Dot + Ponto + + + + DashDot + TraçoPonto + + + + DashDotDot + TraçoPontoPonto + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick diagonal - - - + + + Dot Ponto - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Cor - + Weight Weight - + Style Estilo - + NoLine NoLine - + Solid Sólido - + Dash Tracejado - + DashDot TraçoPonto - + DashDotDot TraçoPontoPonto - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Valor: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm index d7590e5a27..9f92e645f4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index 5861d34ebe..fab90d3a4a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Desen tehnic - - + + Insert Annotation Inserare adnotare @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw Desen tehnic - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw Desen tehnic - - + + Insert Clip group Inserați un grup Clip @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw Desen tehnic - + Remove View from ClipGroup Eliminați Vederea din grupul Clip - + Remove a View from Clip group Eliminați o vedere din grupul Clip @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw Desen tehnic - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Adăugați o vedere la ClipGroup - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw Desen tehnic - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Desen tehnic + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Desen tehnic + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + Desen tehnic + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fişier - + Export page as SVG Exportă pagina ca SVG - + Export a page to an SVG file Exportă pagina într-un fişier SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fişier - + Export page as DXF Exportă pagina ca fișier DXF - + Export a page to a DXF file Exportă pagina ca fișier DXF - + Save Dxf File Salvează fișierul Dxf - + Dxf (*.dxf) Dxf(*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Desen tehnic + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw Desen tehnic - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw Desen tehnic - - + + Link a dimension to 3D geometry Leagă o dimensiune de geometria 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Desen tehnic - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Desen tehnic + + + + Insert a new 3 point Angle dimension Inserați o nouă cotă unghiulară definită prin trei puncte @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw Desen tehnic - - + + Insert a new angle dimension Introduceți o nouă dimensiune unghi @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw Desen tehnic - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw Desen tehnic - + Insert a new diameter dimension Introduceți o nouă dimensiune a diametrului - + Insert a new diameter dimension feature Introduceți o nouă caracteristică a dimensiunii diametrului @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw Desen tehnic - + Insert a new horizontal dimension Introduceți o nouă dimensiune orizontală - + Insert a new horizontal distance dimension Introduceți o nouă dimensiune de distanță orizontală @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw Desen tehnic - + Insert a new vertical dimension Introduceți o nouă dimensiune verticală - + Insert a new vertical distance dimension Introduceți o nouă dimensiune de distanță verticală @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw Desen tehnic - - + + Insert a new length dimension Introduceți o nouă dimensiune lungime @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw Desen tehnic + - Insert new Page using Template Inserați o nouă Pagină utilizănd un Șlabon - + Select a Template File Selectați un șablon - + Template (*.svg *.dxf) Șablon (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw Desen tehnic + - Insert new default Page Inserați o nouă Pagină implicită @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw Desen tehnic + - Insert View in Page Inserați o Vedere în Pagină @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw Desen tehnic + - Insert Detail View Inserați o Vedere de Detaliu @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw Desen tehnic + - Insert Section View in Page Inserează o vedere a secțiunii în pagină @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw Desen tehnic - + Insert Projection Group Introduceți un grup de proiecții - + Insert multiple linked views of drawable object(s) Inserează vederei multiple legate a obiectelor care pot fi desenate + + CmdTechDrawQuadrant + + + TechDraw + Desen tehnic + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw Desen tehnic - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw Desen tehnic - + Insert Spreadsheet view Inserează în vedere a unei foi de calcul - + Inserts a view of a selected spreadsheet Introduceți o vedere cu o foaie de calcul selectată @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw Desen tehnic - + Insert SVG Symbol Introduceți SVG & Simbol - + Insert symbol from a svg file Introduceți simbolul dintr-un fișier Svg @@ -715,72 +820,77 @@ More functions - + Standard Standard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Selecţie greşită - - + + No Shapes or Groups in this selection Nu este nici una dintre forme sau grupuri în acestă selecție - - + + Select at least 1 DrawViewPart object as Base. Selectaţi cel puţin 1 obiect DrawViewPart ca bază. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip şi View trebuie să fie din aceeaşi pagină. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View nu aparține unui Clip - + Choose an SVG file to open Alegeţi un fişier SVG pentru deschidere - + Scalable Vector Graphic Vector Grafic Scalabil (Svg) - - + + Select at least one object. Selectaţi cel puţin un obiect. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Selectați doar un singur obiect tip foaie de calcul Spreadsheet. - + No Drawing View Nu vezi desen în plan - + Open Drawing View before attempting export to SVG. Deschide vederea în plan înainte de a încerca exportul ca SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Avertisment asupra selecției + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Muchia selectată este o curbă BSpline. Raza de curbură va fi aproximată. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Muchia selectată este un BSpline. Diametru va fi aproximat. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Aveți nevoie de două margini drepte pentru a face o cotă de unghi - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Nu există nici un obiect 3D în selecţia dvs - + There are no 3D Edges or Vertices in your selection Există margini 3D sau noduri în selecţia dvs - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Selectarea incorectă - - + + Select an object first Selectaţi un obiect mai întâi - - + + Too many objects selected Prea multe obiecte selectate - - + + Create a page first. Creați /selectați o pagină mai întâi. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Selectaţi exact 1 pagină. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Toate fișierele (*.*) - + Export Page As PDF Exportă pagina ca PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportă pagina ca SVG - + FreeCAD SVG Export Exportă ca FreeCAD SVG - + Show drawing Arată desenul - + Toggle KeepUpdated Activează/dezactivează KeepUpdated @@ -1121,12 +1306,12 @@ Faceţi clic pentru a actualiza textul - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensiuni - + Arrow Style Tipul de săgeată @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimensiune de font în unităţi - + Dimension arrowhead size in units Dimensiuni arrowhead în unităţi - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decoraţiuni - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Ajustează dimensiunea vârfurilor în desen - + Vertex Scale Scara vârfului(punctului final) - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Rotunjit - + Square Pătrat - + Section Line Style Înfățișarea liniei de secțiune - + Center Line Style Înfățișarea liniei de centru - + Matting Style Înfățișarea texturii - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Numele grupului de linie - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Culoarea vârfului - + Vertex display color Vertex display color - - + + Dash Punct - - + + Dot Punct - - + + DashDot Linie punct - - + + DashDotDot Linie două puncte - - + + Solid Solid - + Center Line Color Culoarea liniei de centru - + Section Line Color Culoarea liniei de secțiune @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG & Export SVG - + Toggle &Keep Updated Comuta & actualizează - + Toggle &Frames Comutare & cadre - + Export DXF Export DXF - + Export PDF Exportă PDF - + Different orientation Orientare diferită - + The printer uses a different orientation than the drawing. Do you want to continue? Imprimanta utilizează o orientare diferită decât desenul. Doriţi să continuaţi? - - + + Different paper size Hârtie de dimensiune diferită - - + + The printer uses a different paper size than the drawing. Do you want to continue? Imprimanta utilizează o altă dimensiune de hârtie decât desenul. Doriţi să continuaţi? - + Opening file failed Deschiderea fișierului a eșuat - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Salvează fișierul Dxf - + Dxf (*.dxf) Dxf(*.dxf) - + Selected: Selectat: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Săgeată + + + + Dot + Punct + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Valoare: + + + + Circular + Circular + + + + None + Niciunul + + + + Triangle + Triunghi + + + + Inspection + Inspection + + + + Hexagon + Hexagon + + + + Square + Pătrat + + + + Rectangle + Dreptunghi + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elemente + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Culoare + + + + Weight + Weight + + + + Style + Stil + + + + NoLine + NoLine + + + + Solid + Solid + + + + Dash + Punct + + + + Dot + Punct + + + + DashDot + Linie punct + + + + DashDotDot + Linie două puncte + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Cocher - - - + + + Dot Punct - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Culoare - + Weight Weight - + Style Stil - + NoLine NoLine - + Solid Solid - + Dash Punct - + DashDot Linie punct - + DashDotDot Linie două puncte - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Valoare: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm index 4dea11c509..6d3a2ed6ee 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index ffb3295cfe..caa898afdd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -1,120 +1,183 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Технический чертёж - - + + Insert Annotation - Вставить заметку + Вставить Аннотацию CmdTechDrawArchView - + TechDraw Технический чертёж - + Insert a Section Plane Вставить секущую плоскость - + Inserts a view of a Section Plane from Arch Workbench - Вставить плоскость сечения из архитектурного верстака + Вставить вид Секущей плоскости из Архитектурного верстака CmdTechDrawClip - + TechDraw Технический чертёж - - + + Insert Clip group - Вставить группу срезов + Вставить группу видов CmdTechDrawClipMinus - + TechDraw Технический чертёж - + Remove View from ClipGroup - Удалить вид из группы срезов + Удалить Вид из группы Видов - + Remove a View from Clip group - Удалить вид из группы срезов + Удалить Вид из группы Видов CmdTechDrawClipPlus - + TechDraw Технический чертёж - + Add View to Clip group - Добавить вид в группу срезов + Добавить Вид в группу Видов - + Add a View to Clip group - Добавить вид в группу срезов + Добавить Вид в группу Видов + + + + CmdTechDrawCosmeticEraser + + + TechDraw + Технический чертёж + + + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Технический чертёж + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Технический чертёж + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex CmdTechDrawDraftView - + TechDraw Технический чертёж - + Insert a DraftWB object - Вставить набросок + Вставить объект из верстака Draft - + Insert a View of a Draft Workbench object - Вставить объект верстака набросок (draft) + Вставить вид объекта из верстака Draft CmdTechDrawExportPage - + File Файл - + Export page as SVG Экспорт страницы в SVG - + Export a page to an SVG file Экспорт страницы в файл SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Файл - + Export page as DXF Экспорт страницы в DXF - + Export a page to a DXF file Экспорт страницы в файл DXF - + Save Dxf File Сохранить файл в формате Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Технический чертёж + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,89 +256,103 @@ CmdTechDrawLeaderLine - + TechDraw Технический чертёж - - + + Add a line to a view - Add a line to a view + Добавить строку в вид CmdTechDrawLinkDimension - + TechDraw Технический чертёж - - + + Link a dimension to 3D geometry Связать размер с 3D геометрией - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Технический чертёж - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Технический чертёж + + + + Insert a new 3 point Angle dimension - Вставить новый угловой размер по 3 точкам + Задать угол по 3 вершинам CmdTechDrawNewAngleDimension - + TechDraw Технический чертёж - - + + Insert a new angle dimension - Вставить новый угловой размер + Задать величину угла CmdTechDrawNewBalloon - + TechDraw Технический чертёж - - + + Insert a new balloon - Insert a new balloon + Создать аннотацию CmdTechDrawNewDiameterDimension - + TechDraw Технический чертёж - + Insert a new diameter dimension - Вставить новый размер диаметра + Задать диаметр - + Insert a new diameter dimension feature - Вставить новый размер диаметра в чертёж + Задать свойства диаметра @@ -279,43 +370,43 @@ Insert a new dimension - Вставить новый размер + Задать размер CmdTechDrawNewDistanceXDimension - + TechDraw Технический чертёж - + Insert a new horizontal dimension - Вставить новый горизонтальный размер + Задать горизонтальный размер - + Insert a new horizontal distance dimension - Вставить новый горизонтальный размер + Задать горизонтальный размер CmdTechDrawNewDistanceYDimension - + TechDraw Технический чертёж - + Insert a new vertical dimension - Вставить новый вертикальный размер + Задать вертикальный размер - + Insert a new vertical distance dimension - Вставить новый вертикальный размер + Задать вертикальный размер @@ -329,7 +420,7 @@ Apply geometric hatch to a Face - Применить геометрическую штриховку грани + Применить геометрическую штриховку к грани @@ -349,37 +440,37 @@ CmdTechDrawNewLengthDimension - + TechDraw Технический чертёж - - + + Insert a new length dimension - Вставить новый размер длины + Задать новую длину CmdTechDrawNewPage - + TechDraw Технический чертёж + - Insert new Page using Template - Вставить новую страницу с помощью шаблона + Создать новую страницу с помощью шаблона - + Select a Template File Выберите файл шаблона - + Template (*.svg *.dxf) Шаблон (*.svg *.dxf) @@ -387,15 +478,15 @@ CmdTechDrawNewPageDef - + TechDraw Технический чертёж + - Insert new default Page - Вставить новый лист по умолчанию + Вставить новую страницу по умолчанию @@ -409,69 +500,83 @@ Insert a new radius dimension - Вставить новый размер радиуса + Задать Радиус CmdTechDrawNewView - + TechDraw Технический чертёж + - Insert View in Page - Вставить вид на страницу + Вставить Вид на страницу CmdTechDrawNewViewDetail - + TechDraw Технический чертёж + - Insert Detail View - Вставить подробный вид + Вставить Подробный вид CmdTechDrawNewViewSection - + TechDraw Технический чертёж + - Insert Section View in Page - Вставить вид сечения на страницу + Вставить Вид Сечения на страницу CmdTechDrawProjGroup - + TechDraw Технический чертёж - + Insert Projection Group Вставить группу проекций - + Insert multiple linked views of drawable object(s) Вставить несколько связанных видов чертежного(ых) объекта(ов) + + CmdTechDrawQuadrant + + + TechDraw + Технический чертёж + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,49 +594,49 @@ CmdTechDrawRichAnno - + TechDraw Технический чертёж - - + + Add a rich text annotation - Add a rich text annotation + Добавить форматированную текстовую аннотацию CmdTechDrawSpreadsheet - + TechDraw Технический чертёж - + Insert Spreadsheet view - Вставить Электронную таблицу + Вставить вид Электронная Таблица - + Inserts a view of a selected spreadsheet - Вставить выбранную электронную таблицу + Вставить вид выбранной электронной таблицы CmdTechDrawSymbol - + TechDraw Технический чертёж - + Insert SVG Symbol Вставить SVG символ - + Insert symbol from a svg file Вставить символ из файла svg @@ -555,38 +660,38 @@ Save changes - Save changes + Сохранить изменения Close editor - Close editor + Закрыть редактор Paragraph formatting - Paragraph formatting + Форматирование абзаца Undo (CTRL+Z) - Undo (CTRL+Z) + Отменить (Ctrl+Z) Undo - Undo + Отменить Redo - Redo + Повторить Cut (CTRL+X) - Cut (CTRL+X) + Вырезать (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Копировать (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Вставить (CTRL+V) Paste - Paste + Вставить Link (CTRL+L) - Link (CTRL+L) + Ссылка (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Курсив (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Подчеркнутый (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Зачеркнутый Strike Out - Strike Out + Зачёркнутый Bullet list (CTRL+-) - Bullet list (CTRL+-) + Маркированный список (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Упорядоченный список (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Уменьшить отступ (CTRL+,) Decrease indentation - Decrease indentation + Уменьшить отступ Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Увеличить отступ (CTRL+.) Increase indentation - Increase indentation + Увеличить отступ Text foreground color - Text foreground color + Цвет текста Text background color - Text background color + Цвет фона @@ -712,188 +817,201 @@ More functions - More functions + Больше функций - + Standard Стандартно - + Heading 1 - Heading 1 + Заголовок 1 - + Heading 2 - Heading 2 + Заголовок 2 - + Heading 3 - Heading 3 + Заголовок 3 - + Heading 4 - Heading 4 + Заголовок 4 - + Monospace - Monospace + Моноширинный - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Удалить форматирование символов + + + + Remove all formatting + Удалить всё форматирование + + + Edit document source - Edit document source + Изменить источник документа - + Document source - Document source + Источник документа - + Create a link - Create a link + Создать ссылку - + Link URL: - Link URL: + URL-адрес ссылки: - + Select an image - Select an image + Выберите изображение - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Все (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Неправильный выбор - - + + No Shapes or Groups in this selection Нет Фигур или групп в выделении - - + + Select at least 1 DrawViewPart object as Base. Выберите хотя бы один вид детали как базовый. - + Select one Clip group and one View. - Select one Clip group and one View. + Выберите группу видов и один вид. - + Select exactly one View to add to group. Выберите ровно одно представление для добавления в группу. - + Select exactly one Clip group. Выберите ровно одну группу срезов. - + Clip and View must be from same Page. Срез и вид должны быть из одного листа. - + Select exactly one View to remove from Group. Выберите ровно одно представление для удаления из группы. - + View does not belong to a Clip Вид не принадлежит срезу - + Choose an SVG file to open Выберите файл SVG для открытия - + Scalable Vector Graphic Масштабируемая векторная графика - - + + Select at least one object. Выберите хотя бы один объект. - + There is no Section Plane in selection. Нет плоскостей сечения среди выбранного. - + Select exactly one Spreadsheet object. Выберите только один объект типа Таблица. - + No Drawing View Нет видов чертежа - + Open Drawing View before attempting export to SVG. Открыть вид чертежа перед экспортом в SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Предупреждение выбора + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Выбранные края является B-сплайном. Радиус будет приблизительный. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Выбранные края является B-сплайном. Диаметр будет приблизительный. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Необходимы две прямых линии, чтобы создать угловой размер - + Need three points to make a 3 point Angle Dimension Необходимы три точки, чтобы создать угловой размер по точкам - + There is no 3D object in your selection В вашем выборе нет 3D объекта - + There are no 3D Edges or Vertices in your selection Вы вашем выборе нет ребер или вершин - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Некорректный выбор - - + + Select an object first Сначала выберите объект - - + + Too many objects selected Выбрано слишком много объектов - - + + Create a page first. Сначала создайте страницу. - - + + No View of a Part in selection. Нет видов детали в выбранном. - + No Feature with Shape in selection. Нет элемента с формой в выбранном. - - + + + + + + + + Task In Progress - Task In Progress + Задача в процессе - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Закройте окно активной задачи и повторите снова. - - + + + + + Selection Error - Selection Error + Ошибка выбора - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Не могу прикрепить указательную линию. Базовый вид не выбран. - + + You must select a base View for the line. - You must select a base View for the line. + Необходимо выбрать базовый вид для линии. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Выберите ровно 1 страницу. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Все файлы (*.*) - + Export Page As PDF Экспорт страницы в PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Экспорт страницы в SVG - + FreeCAD SVG Export FreeCAD экспорт SVG - + Show drawing Показать чертёж - + Toggle KeepUpdated Вкл/Выкл обновление @@ -1121,24 +1306,34 @@ Нажмите, чтобы обновить текст - + New Leader Line - New Leader Line + Новая указательная линия - + Edit Leader Line - Edit Leader Line + Изменить указательную линию Rich text creator - Rich text creator + Автор форматированного текста - + Rich text editor - Rich text editor + Редактор форматированного текста + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Размеры - + Arrow Style Стиль стрелки @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Добавить блок в текст Измерения Dimension text color - Dimension text color + Цвет текста Измерения Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Символ, используемый для указания размера Диаметра Use system setting for decimal places. - Use system setting for decimal places. + Использовать системные настройки для указания дробной части. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Количество дробных знаков, если не используются Глобальные Значения - + Dimension font size in units Размер шрифта в ед. изм. - + Dimension arrowhead size in units Размер стрелки в ед. изм. - + Default Format - Default Format + Формат по умолчанию - + Custom format for Dimension text - Custom format for Dimension text + Пользовательский формат текста Размера - + Decorations Внешний вид - + Color for centerlines - Color for centerlines + Цвет осевых линий - + Adjusts size of vertices in drawing Настраивает размер вершин в чертеже - + Vertex Scale Масштаб вершины - + Round or Square outline in Detail view - Round or Square outline in Detail view + Круглый или квадратный контур в подробном представлении - + Round Круглый - + Square Квадрат - + Section Line Style Стиль линии разреза - + Center Line Style Стиль центральной линии - + Matting Style Стиль матирования - + Line type for centerlines - Line type for centerlines + Тип линии для осевых линий - - + + NeverShow Больше не показывать - + Line color for sectionlines - Line color for sectionlines + Цвет линии для сечения - + Line Group Name Название группы линий - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Имя записи LineGroup в файле CSV - + Vertex Color Цвет вершины - + Vertex display color - Vertex display color + Цвет отображения вершин - - + + Dash Штрих - - + + Dot Точка - - + + DashDot Штрихпунктир - - + + DashDotDot Штрихпунктир с 2 точками - - + + Solid Твердотельный объект - + Center Line Color Цвет Центральной Линии - + Section Line Color Цвет Линии Сечения @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG Экспорт в SVG - + Toggle &Keep Updated Вкл/Выкл обновление - + Toggle &Frames Вкл./Выкл рамки - + Export DXF - Export DXF + Экспорт в DXF - + Export PDF Экспортировать в PDF - + Different orientation Отличающаяся ориентация - + The printer uses a different orientation than the drawing. Do you want to continue? Принтер использует отличающуюся от чертежа ориентацию бумаги. Хотите продолжить? - - + + Different paper size Отличающийся формат листа - - + + The printer uses a different paper size than the drawing. Do you want to continue? Принтер использует отличающийся от чертежа формат листа. Хотите продолжить? - + Opening file failed Ошибка при открытии файла - + Can not open file %1 for writing. Не удалось открыть файл %1 для записи. - + Save Dxf File Сохранить файл в формате Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Выбрано: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Страница чертежа: - + exported from FreeCAD document: экспортировано из документа FreeCAD: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Стрелка + + + + Dot + Точка + + + + Start Symbol + Начальный символ + + + + Symbol: + Symbol: + + + + Value: + Значение: + + + + Circular + Circular + + + + None + Ничего + + + + Triangle + Треугольник + + + + Inspection + Inspection + + + + Hexagon + Шестиугольник + + + + Square + Квадрат + + + + Rectangle + Прямоугольник + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Базовый вид + + + + Elements + Элементы + + + + Vertical + По вертикали + + + + Horizontal + По горизонтали + + + + Aligned + Aligned + + + + Color + Цвет + + + + Weight + Значение + + + + Style + Стиль + + + + NoLine + Без линии + + + + Solid + Твердотельный объект + + + + Dash + Штрих + + + + Dot + Точка + + + + DashDot + Штрихпунктир + + + + DashDotDot + Штрихпунктир с 2 точками + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + мм + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Базовый вид + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Щелкните левой кнопкой мыши, чтобы установить точку + + + + In progress edit abandoned. Start over. + Редактирование прекращено. Начать сначала. + + TechDrawGui::TaskGeomHatch @@ -1799,135 +2213,141 @@ Do you want to continue? Leader Line - Leader Line + Указательная линия Base View - Base View + Базовый вид - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Начальный символ - - + + No Symbol - No Symbol + Без символа - - + + Filled Triangle - Filled Triangle + Заполненный треугольник - - + + Open Triangle - Open Triangle + Открытый треугольник - - + + Tick Зацеп - - - + + + Dot Точка - - + + Open Circle - Open Circle + Открытый круг - + + + Fork + Fork + + + End Symbol - End Symbol + Конечный символ - + Color Цвет - + Weight - Weight + Значение - + Style Стиль - + NoLine - NoLine + Без линии - + Solid Твердотельный объект - + Dash Штрих - + DashDot Штрихпунктир - + DashDotDot Штрихпунктир с 2 точками - - + + Pick a starting point for leader line - Pick a starting point for leader line + Выберите начальную точку для указательной линии - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Нажмите и перетащите маркеры для настройки указательной линии - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Щелкните левой кнопкой мыши, чтобы установить точку - + Press OK or Cancel to continue - Press OK or Cancel to continue + Нажмите OK или Отмена, чтобы продолжить - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Редактирование прекращено. Начать сначала. @@ -2152,27 +2572,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + Форматированный блок Аннотации Max Width - Max Width + Максимальная Ширина Base Feature - Base Feature + Основные Функции Show Frame - Show Frame + Показать Рамку Start Rich Text Editor - Start Rich Text Editor + Запустить редактор Текста @@ -2270,7 +2690,7 @@ Do you want to continue? Change Editable Field - Редактировать поле + Изменить редактируемые поля @@ -2288,4 +2708,28 @@ Do you want to continue? Значение: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm index 220af60182..900f101800 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts index 2c019d7e9d..43b09bef86 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Súbor - + Export page as SVG Export page as SVG - + Export a page to an SVG file Exportovať stranu do SVG súboru @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Súbor - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Štandard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Chybný výber - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Vyberte súbor SVG k otvoreniu - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Select exactly one Spreadsheet object. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Create a page first. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Všetky súbory (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Zobraziť nákres - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Rozmery - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Štvorec - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Bodka - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Teleso - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Export do PDF - + Different orientation Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size Different paper size - - + + The printer uses a different paper size than the drawing. Do you want to continue? The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed Opening file failed - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Vybrané: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Šípka + + + + Dot + Bodka + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Žiadny + + + + Triangle + Trojuholník + + + + Inspection + Inspection + + + + Hexagon + Šesťuholník + + + + Square + Štvorec + + + + Rectangle + Obdĺžnik + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elements + + + + Vertical + Zvislý + + + + Horizontal + Horizontálne + + + + Aligned + Aligned + + + + Color + Farba + + + + Weight + Weight + + + + Style + Štýl + + + + NoLine + NoLine + + + + Solid + Teleso + + + + Dash + Dash + + + + Dot + Bodka + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Bodka - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Farba - + Weight Weight - + Style Štýl - + NoLine NoLine - + Solid Teleso - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm index e2366e6685..d4e1dbeca5 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index a0fa68d635..7477805514 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TehRisanje - - + + Insert Annotation Vstavi Opombo @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TehRisanje - + Insert a Section Plane Vstavi presečno ravnino - + Inserts a view of a Section Plane from Arch Workbench Vstavi pogled presečne ravnine iz Arch delovnega okolja @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TehRisanje - - + + Insert Clip group Vstavi Clip skupino @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TehRisanje - + Remove View from ClipGroup Odstrani Pogled iz skupine Izrezkov - + Remove a View from Clip group Odstrani Pogled iz skupine Izrezkov @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TehRisanje - + Add View to Clip group Dodaj Pogled v skupino Izrezkov - + Add a View to Clip group Dodaj Pogled v skupino Izrezkov - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TehRisanje - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TehRisanje + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TehRisanje + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TehRisanje + + + Insert a DraftWB object Vstavi DraftWB objekt - + Insert a View of a Draft Workbench object Vstavi Pogled objekta Draft delovnega okolja @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Datoteka - + Export page as SVG Izvozi stran kot SVG - + Export a page to an SVG file Izvozi stran v datoteko SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Datoteka - + Export page as DXF Izvozi stran kot DXF - + Export a page to a DXF file Izvozi stran v datoteko DXF - + Save Dxf File Shrani datoteko Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TehRisanje + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TehRisanje - - + + Add a line to a view - Add a line to a view + Dododaj pogledu črto CmdTechDrawLinkDimension - + TechDraw TehRisanje - - + + Link a dimension to 3D geometry Poveži dimenzijo s 3D geometrijo - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TehRisanje - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TehRisanje + + + + Insert a new 3 point Angle dimension Vstavi novo 3 točkovno mero kota @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TehRisanje - - + + Insert a new angle dimension Vstavi novo dimenzijo kota @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TehRisanje - - + + Insert a new balloon - Insert a new balloon + Vstavite nov okvirček CmdTechDrawNewDiameterDimension - + TechDraw TehRisanje - + Insert a new diameter dimension Vstavi novo mero premera - + Insert a new diameter dimension feature Vstavi novo značilnost mere premera @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TehRisanje - + Insert a new horizontal dimension Vstavi novo vodoravno dimenzijo - + Insert a new horizontal distance dimension Vstavi novo vodoravno mero razdalje @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TehRisanje - + Insert a new vertical dimension Vstavi novo navpično mero - + Insert a new vertical distance dimension Vstavi novo navpično mero razdalje @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TehRisanje - - + + Insert a new length dimension Vstavi novo imenzijo dolžine @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TehRisanje + - Insert new Page using Template Vstavi novo Stran z uporabo Predloge - + Select a Template File Izberi datoteko predloge - + Template (*.svg *.dxf) Predloga (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TehRisanje + - Insert new default Page Vstavi novo privzeto Stran @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TehRisanje + - Insert View in Page Vstavi Pogled v Stran @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TehRisanje + - Insert Detail View Vstavi Podroben Pogled @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TehRisanje + - Insert Section View in Page Vstavi Pogled Prereza v Stran @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TehRisanje - + Insert Projection Group Vstavi Projekcijsko Skupino - + Insert multiple linked views of drawable object(s) Vstavite več povezanih pogledov risanega(-ih) predmeta(-ov) + + CmdTechDrawQuadrant + + + TechDraw + TehRisanje + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TehRisanje - - + + Add a rich text annotation - Add a rich text annotation + Dodaj pripis z obogatenim besedilom CmdTechDrawSpreadsheet - + TechDraw TehRisanje - + Insert Spreadsheet view Vstavi pogled Preglednice - + Inserts a view of a selected spreadsheet Vstavi pogled izbrane preglednice @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TehRisanje - + Insert SVG Symbol Vstavi SVG simbol - + Insert symbol from a svg file Vstavi simbol iz datoteke SVG @@ -555,38 +660,38 @@ Save changes - Save changes + Shrani spremembe Close editor - Close editor + Zapri urejevalnik Paragraph formatting - Paragraph formatting + Oblikovanje odstavka Undo (CTRL+Z) - Undo (CTRL+Z) + Razveljavi (CTRL+Z) Undo - Undo + Razveljavi Redo - Redo + Uveljavi Cut (CTRL+X) - Cut (CTRL+X) + Izreži (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Kopiraj (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Prilepi (CTRL+V) Paste - Paste + Prilepi Link (CTRL+L) - Link (CTRL+L) + Poveži (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Ležeče (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Podčrtaj (CTRL+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Prečrtaj Strike Out - Strike Out + Prečrtano Bullet list (CTRL+-) - Bullet list (CTRL+-) + Seznam vrstičnih oznak (CTRL+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Urejen seznam (CTRL+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Zmanjšaj zamik (CTRL+,) Decrease indentation - Decrease indentation + Zmanjšaj zamik Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Povečaj zamik (CTRL+.) Increase indentation - Increase indentation + Povečaj zamik Text foreground color - Text foreground color + Barva ospredja besedila Text background color - Text background color + Barva ozadja besedila @@ -712,188 +817,201 @@ More functions - More functions + Več funkcij - + Standard Standard - + Heading 1 - Heading 1 + Naslov 1 - + Heading 2 - Heading 2 + Naslov 2 - + Heading 3 - Heading 3 + Naslov 3 - + Heading 4 - Heading 4 + Naslov 4 - + Monospace - Monospace + Enakokoračno - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Odstrani oblikovanje znakov + + + + Remove all formatting + Odstrani vse oblikovanje + + + Edit document source - Edit document source + Uredi vir dukumenta - + Document source - Document source + Vir dokumenta - + Create a link - Create a link + Ustvari povezavo - + Link URL: - Link URL: + URL povezava: - + Select an image - Select an image + Izberite sliko - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Vse (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Napačna izbira - - + + No Shapes or Groups in this selection V izbiri ni Oblik ali Skupin - - + + Select at least 1 DrawViewPart object as Base. Izberi vsaj 1 DrawViewPart objekt kot osnovo. - + Select one Clip group and one View. - Select one Clip group and one View. + Izberite eno skupino Izrezkov in en Pogled. - + Select exactly one View to add to group. Izberi natanko en Pogled za dodajanje v skupino. - + Select exactly one Clip group. Izberi natanko eno skupino Izrezkov. - + Clip and View must be from same Page. Izrezek in Pogled morata biti iz iste Strani. - + Select exactly one View to remove from Group. Izberi natanko en Pogled za odstranitev iz skupine. - + View does not belong to a Clip Pogled ne pripada Clip-u - + Choose an SVG file to open Izberite datoteko SVG, ki jo želite odpreti - + Scalable Vector Graphic Vektorska slika spremenljive velikosti - - + + Select at least one object. Izberite vsaj en predmet. - + There is no Section Plane in selection. V izbiri ni presečne ravnine. - + Select exactly one Spreadsheet object. Izberite natanko eno preglednico. - + No Drawing View Ni Risarskega pogleda - + Open Drawing View before attempting export to SVG. Odpri Drawing Pogled preden poskušaš izvoziti v datoteko SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Opozorilo Izbire + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Izbran rob je BSpline. Radij bo približen. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Izbran rob je BSpline. Premer bo približen. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Za mero kota potrebuješ dva ravna robova - + Need three points to make a 3 point Angle Dimension Za 3 točkovno mero kota potrebuješ 3 točke - + There is no 3D object in your selection V tvoji izbiri ni 3D objekta - + There are no 3D Edges or Vertices in your selection V tvoji izbiri ni 3D Robov ali Ogljišč - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Nepravilna izbira - - + + Select an object first Izberi objekt najprej - - + + Too many objects selected Izbranih je preveč objektov - - + + Create a page first. Najprej ustvarite stran. - - + + No View of a Part in selection. V izboru ni pogleda dela. - + No Feature with Shape in selection. V izboru ni značilnosti oblike. - - + + + + + + + + Task In Progress - Task In Progress + Opravilo je v teku - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Zapri dejavno pogovorno okno z opravili in poskusi ponovno. - - + + + + + Selection Error - Selection Error + Napaka izbire - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + Opisnice ni mogoče pritrdti. Nobega pogleda podloge ni izbranega. - + + You must select a base View for the line. - You must select a base View for the line. + Za črto morate izbrati pogled predloge. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1075,43 +1260,43 @@ Izberin natanko 1 stran. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Vse datoteke (*.*) - + Export Page As PDF Izvozi stran v PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvozi stran kot SVG - + FreeCAD SVG Export FreeCAD SVG Izvoz - + Show drawing Prikaži risbo - + Toggle KeepUpdated Preklopi KeepUpdated @@ -1121,24 +1306,34 @@ Klikni za posodobitev besedila - + New Leader Line - New Leader Line + Nova opisnica - + Edit Leader Line - Edit Leader Line + Uredi opisnico Rich text creator - Rich text creator + Ustvarjalnik obogatenega besedila - + Rich text editor - Rich text editor + Urejevalnik obogatenega besedila + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Mere - + Arrow Style Slog Puščice @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + K besedilu kote pristavi enoto Dimension text color - Dimension text color + Barva besedila kote Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Znak za označevanje premera Use system setting for decimal places. - Use system setting for decimal places. + Nastavitev decimalnih mest prevzami iz sistama. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + Število decimalnih mest, če se ne uporablja Splošnih decimalk - + Dimension font size in units Velikost pisave Dimenzije v enotah - + Dimension arrowhead size in units Velikost glave puščice v enotah - + Default Format - Default Format + Privzeta oblika zapisa - + Custom format for Dimension text - Custom format for Dimension text + Oblikovanje besedila kote po meri - + Decorations Okras - + Color for centerlines - Color for centerlines + Barva središčnice - + Adjusts size of vertices in drawing Prilagodi velikost ogljišč na risbi - + Vertex Scale Povečava vozlišča - + Round or Square outline in Detail view - Round or Square outline in Detail view + Okrogel ali kvadraten obris v pogledu Detajla - + Round Zaokroži - + Square Kvadrat - + Section Line Style Slog črte Razdelka - + Center Line Style Slog Srednjice - + Matting Style Slog Mat delov - + Line type for centerlines - Line type for centerlines + Vrsta črte za središčnico - - + + NeverShow NikoliNePrikaži - + Line color for sectionlines - Line color for sectionlines + Barva črte za središčnico - + Line Group Name Ime Skupine Črt - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Ime vnosa v CSV datoteko NaboraČrt (LineGroup) - + Vertex Color Barva Vozlišča - + Vertex display color - Vertex display color + Prikazna barva oglišča - - + + Dash - Pomišljaj + Črtkana - - + + Dot Pika - - + + DashDot - PomišljajPika + Črta pika - - + + DashDotDot - PomišljajPikaPika + Črta dve piki - - + + Solid Telo - + Center Line Color Barva Srednjice - + Section Line Color Barva Prerezne črte @@ -1426,7 +1626,7 @@ Hidden Line - Skrita Črta + Skrita črta @@ -1441,7 +1641,7 @@ Dash - Pomišljaj + Črtkana @@ -1451,12 +1651,12 @@ DashDot - PomišljajPika + Črta pika DashDotDot - PomišljajPikaPika + Črta dve piki @@ -1516,12 +1716,12 @@ Section Hatch - Šrafure Razdelka + Šrafura prereza Section Face - Ploskev Razdelka + Površine prereza @@ -1546,7 +1746,7 @@ Geom Hatch - Geom Šrafura + Geom šrafura @@ -1566,7 +1766,7 @@ Hatch Image - Slika Šrafure + Slika šrafure @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Izvozi SVG - + Toggle &Keep Updated Preklopi &Ohrani Posodobljeno - + Toggle &Frames Preklopi &Okvirji - + Export DXF - Export DXF + Izvozi DXF - + Export PDF Izvoz PDF - + Different orientation Druga usmerjenost - + The printer uses a different orientation than the drawing. Do you want to continue? Tiskalnik uporablja drugo usmerjenost kot risba. Ali želite nadaljevati? - - + + Different paper size Druga velikost papirja - - + + The printer uses a different paper size than the drawing. Do you want to continue? Tiskalnik uporablja drugo velikost papirja kot risba. Ali želite nadaljevati? - + Opening file failed Odpiranje datoteke ni uspelo - + Can not open file %1 for writing. Datoteke %1 ni mogoče odpreti za pisanje. - + Save Dxf File Shrani datoteko Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Izbrano: @@ -1721,16 +1921,230 @@ Ali želite nadaljevati? TechDrawGui::QGVPage - + Drawing page: Risarska stran: - + exported from FreeCAD document: izvoženo iz FreeCAD dokumenta: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Puščica + + + + Dot + Pika + + + + Start Symbol + Začetni znak + + + + Symbol: + Symbol: + + + + Value: + Vrednost: + + + + Circular + Circular + + + + None + Brez + + + + Triangle + Trikotnik + + + + Inspection + Inspection + + + + Hexagon + Šestkotnik + + + + Square + Kvadrat + + + + Rectangle + Pravokotnik + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Pogled podloge + + + + Elements + Elementi + + + + Vertical + Navpično + + + + Horizontal + Vodoravno + + + + Aligned + Aligned + + + + Color + Barva + + + + Weight + Debelina + + + + Style + Slog + + + + NoLine + Brezčrtno + + + + Solid + Telo + + + + Dash + Črtkana + + + + Dot + Pika + + + + DashDot + Črta pika + + + + DashDotDot + Črta dve piki + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Pogled podloge + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Levi klik za določitev točke + + + + In progress edit abandoned. Start over. + Tekom urejanja je prišlo do prekinitve. Začni znova. + + TechDrawGui::TaskGeomHatch @@ -1799,135 +2213,141 @@ Ali želite nadaljevati? Leader Line - Leader Line + Opisnica Base View - Base View + Pogled podloge - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Začetni znak - - + + No Symbol - No Symbol + Brez znaka - - + + Filled Triangle - Filled Triangle + Zapolnjen Trikotnik - - + + Open Triangle - Open Triangle + Odprt trikotnik - - + + Tick Kljukica - - - + + + Dot Pika - - + + Open Circle - Open Circle + Odprt krog - + + + Fork + Fork + + + End Symbol - End Symbol + Končni znak - + Color Barva - + Weight - Weight + Debelina - + Style Slog - + NoLine - NoLine + Brezčrtno - + Solid Telo - + Dash - Pomišljaj + Črtkana - + DashDot - PomišljajPika + Črta pika - + DashDotDot - PomišljajPikaPika + Črta dve piki - - + + Pick a starting point for leader line - Pick a starting point for leader line + Izberite začetno točko opisnice - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Za prilagoditev opisnice kliknite in povlecite oznake - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Levi klik za določitev točke - + Press OK or Cancel to continue - Press OK or Cancel to continue + Klikni V redu ali Prekliči za nadaljevanje - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + Tekom urejanja je prišlo do prekinitve. Začni znova. @@ -2152,27 +2572,27 @@ Ali želite nadaljevati? Rich Text Annotation Block - Rich Text Annotation Block + Opomba z obogatenim besedilom Max Width - Max Width + Največja širina Base Feature - Base Feature + Osnovna značilnost Show Frame - Show Frame + Pokaži okvir Start Rich Text Editor - Start Rich Text Editor + Zaženi urejevalnik obogatenega besedila @@ -2288,4 +2708,28 @@ Ali želite nadaljevati? Vrednost: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm index 0d62ae1309..3e41180a11 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 6190b5b7b4..b0767fbb58 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insert Annotation @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Датотека - + Export page as SVG Export page as SVG - + Export a page to an SVG file Извези страницу у 'SVG' датотеку @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Датотека - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insert a new angle dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insert a new diameter dimension - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insert a new horizontal dimension - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Select a Template File - + Template (*.svg *.dxf) Template (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insert View in Page @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Insert SVG Symbol - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Стандард - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Погрешан избор - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Изаберите 'SVG' датотеку за отварање - + Scalable Vector Graphic Scalable Vector Graphic - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Изаберите само једну унакрсну табелу. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Прво направите cтраницу. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Све Датотеке (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Прикажи цртеж - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Димензије - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Квадрат - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Тачка - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Чврcто тело - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Извези PDF - + Different orientation Другачија оријентација - + The printer uses a different orientation than the drawing. Do you want to continue? Штампач кориcти другачију оријентацију од цртежа. Да ли желиш да наcтавиш? - - + + Different paper size Другачија величина папира - - + + The printer uses a different paper size than the drawing. Do you want to continue? Штампач кориcти другачију величину папира од цртежа. Да ли желиш да наcтавиш? - + Opening file failed Отварање датотеке неуcпешно - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Одабрано: @@ -1721,16 +1921,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Cтрелица + + + + Dot + Тачка + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Ниједан + + + + Triangle + Троугао + + + + Inspection + Inspection + + + + Hexagon + Хекcагон + + + + Square + Квадрат + + + + Rectangle + Правоугаоник + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Елементи + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Боја + + + + Weight + Weight + + + + Style + Стил + + + + NoLine + NoLine + + + + Solid + Чврcто тело + + + + Dash + Dash + + + + Dot + Тачка + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + мм + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + 'X' + + + + Z + 'Z' + + + + Y + 'Y' + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Тачка - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Боја - + Weight Weight - + Style Стил - + NoLine NoLine - + Solid Чврcто тело - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm index 56309fb712..12d884456f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 0c09f8a171..2183ac6ab5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Infoga Markeringar @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Fil - + Export page as SVG Export page as SVG - + Export a page to an SVG file Exportera en sida till en SVG-fil @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fil - + Export page as DXF Exportera sida som DXF - + Export a page to a DXF file Exportera en sida till en DXF-fil - + Save Dxf File Spara DXF-fil - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Länka en dimension till 3D-geometri - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Infoga en ny Vinkeldimension med 3 punkter @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Infoga en ny vinkel-dimension @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Infoga en ny diameter-dimension - + Insert a new diameter dimension feature Infoga en ny diameter-dimension funktion @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Infoga en ny horisontell dimension - + Insert a new horizontal distance dimension Infoga en ny horisontellt längdmått @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Infoga ett nytt vertikalt mått - + Insert a new vertical distance dimension Infoga ett nytt vertikalt längdmått @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Infoga en ny längdmåttsättning @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Infoga en ny Sida med hjälp av en Mall - + Select a Template File Välj en mall - + Template (*.svg *.dxf) Mall (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Infoga en ny standard-Sida @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Infoga en Vy i Sidan @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Infoga Partiell vy @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Infoga Lokal vy i Sidan @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Infoga Projektionsgrupp - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Infoga SVG symbol - + Insert symbol from a svg file Infoga en symbol från en svg fil @@ -715,72 +820,77 @@ More functions - + Standard Standard - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Fel val - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Välj en SVG fil att öppna - + Scalable Vector Graphic Skalbar vektorgrafik - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Välj exakt ett sprängskissobjekt. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Markeringsvarning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. Skapa en sida först. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Alla filer (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing Visa ritning - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Dimensioner - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square Kvadrat - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot Punkt - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Solid - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Exportera PDF - + Different orientation Annan orientering - + The printer uses a different orientation than the drawing. Do you want to continue? Skrivaren använder en annan orientering än ritningen. Vill du fortsätta? - - + + Different paper size Annan pappersstorlek - - + + The printer uses a different paper size than the drawing. Do you want to continue? Skrivaren använder en annan pappersstorlek än ritningen. Vill du fortsätta? - + Opening file failed Fel vid filöppning - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Spara DXF-fil - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Vald: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Pil + + + + Dot + Punkt + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + Inget + + + + Triangle + Triangel + + + + Inspection + Inspection + + + + Hexagon + Hexagon + + + + Square + Kvadrat + + + + Rectangle + Rektangel + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Element + + + + Vertical + Lodrät + + + + Horizontal + Horisontell + + + + Aligned + Aligned + + + + Color + Färg + + + + Weight + Weight + + + + Style + Stil + + + + NoLine + NoLine + + + + Solid + Solid + + + + Dash + Dash + + + + Dot + Punkt + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Punkt - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Färg - + Weight Weight - + Style Stil - + NoLine NoLine - + Solid Solid - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm index a43553621c..4a31aea503 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index 06133a812c..be0d6ae9ff 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TeknikÇizim - - + + Insert Annotation Açıklama girin @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TeknikÇizim - + Insert a Section Plane Bir Kesit Düzlemi Ekle - + Inserts a view of a Section Plane from Arch Workbench Mimari Çalışma Tezgahından (Arch Workbench) Kesit Düzleminin bir görünümünü ekler @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TeknikÇizim - - + + Insert Clip group Kesim grubu ekleyin @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TeknikÇizim - + Remove View from ClipGroup KesimGrubu'ndan görüntü çıkarın - + Remove a View from Clip group KesimGrubu'ndan bir görüntü çıkarın @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TeknikÇizim - + Add View to Clip group Görüntüyü Kesim Grubu'na ekle - + Add a View to Clip group Kesim Grubu'na Bir Görüntü ekle - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TeknikÇizim - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TeknikÇizim + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TeknikÇizim + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TeknikÇizim + + + Insert a DraftWB object Bir DraftWB nesnesi ekle - + Insert a View of a Draft Workbench object Taslak Çalışma Tezgahının (Draft Workbench) bir görünümünü ekle @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Dosya - + Export page as SVG Sayfayı SVG olarak dışa aktar - + Export a page to an SVG file Sayfayı, SVG dosyası olarak dışarı aktar @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Dosya - + Export page as DXF Sayfayı DXF olarak dışa aktar - + Export a page to a DXF file Sayfayı DXF dosyasına (dışa) aktar - + Save Dxf File DXF dosyasını kaydet - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TeknikÇizim + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TeknikÇizim - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TeknikÇizim - - + + Link a dimension to 3D geometry 3D geometriye bir ebat ekle - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TeknikÇizim - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TeknikÇizim + + + + Insert a new 3 point Angle dimension Yeni bir 3 noktalı Açı ölçüsü ekle @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TeknikÇizim - - + + Insert a new angle dimension Yeni bir açı boyutu ekle @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TeknikÇizim - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TeknikÇizim - + Insert a new diameter dimension Yeni bir çap ölçüsü ekle - + Insert a new diameter dimension feature Yeni bir çap ölçü özelliği ekle @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TeknikÇizim - + Insert a new horizontal dimension Yeni bir yatay ölçü ekle - + Insert a new horizontal distance dimension Yeni bir yatay mesafe ölçüsü ekle @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TeknikÇizim - + Insert a new vertical dimension Yen bir dikey ölçü ekle - + Insert a new vertical distance dimension Yeni bir dikey mesafe boyutu ekle @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TeknikÇizim - - + + Insert a new length dimension Yeni bir uzunluk boyutu ekle @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TeknikÇizim + - Insert new Page using Template Şablondan yeni bir sayfa ekle - + Select a Template File Bir Şablon dosyası seçin - + Template (*.svg *.dxf) Şablon (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TeknikÇizim + - Insert new default Page Yeni varsayılan sayfa ekle @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TeknikÇizim + - Insert View in Page Sayfadaki görünümü ekle @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TeknikÇizim + - Insert Detail View Detay Görünümü Ekle @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TeknikÇizim + - Insert Section View in Page Sayfada Kesit Görünümü Ekle @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TeknikÇizim - + Insert Projection Group Projeksiyon grubu ekle - + Insert multiple linked views of drawable object(s) Çizilebilir nesne(ler) in çok bağlantılı görünümlerini ekle + + CmdTechDrawQuadrant + + + TechDraw + TeknikÇizim + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TeknikÇizim - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TeknikÇizim - + Insert Spreadsheet view Hesap tablosu görünümü ekle - + Inserts a view of a selected spreadsheet Seçili bir hesap tablosunun görünümünü ekle @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TeknikÇizim - + Insert SVG Symbol SVG Simgesi ekle - + Insert symbol from a svg file Bir svg dosyasından simge ekle @@ -715,72 +820,77 @@ More functions - + Standard Standart - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Yanlış seçim - - + + No Shapes or Groups in this selection Seçim içinde şekil(ler) ya da Grup(lar) yok - - + + Select at least 1 DrawViewPart object as Base. En az 1 DrawViewPart nesnesini Temel olarak seçin. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Gruba eklemek için tam olarak bir Görünüm seçin. - + Select exactly one Clip group. Tam olarak bir Kesim grubu seçin. - + Clip and View must be from same Page. Klip ve görünümü bakarak aynı sayfada olması gerekir. - + Select exactly one View to remove from Group. Gruptan kaldırmak için tam olarak bir Görünüm seçin. - + View does not belong to a Clip Görünüm bir klibe ait değil - + Choose an SVG file to open Açmak için bir SVG dosyası seçin - + Scalable Vector Graphic Ölçeklenebilir Vektör Grafiği - - + + Select at least one object. En az bir nesne seçin. - + There is no Section Plane in selection. Seçimde Kesit Düzlemi yok. - + Select exactly one Spreadsheet object. Tam olarak bir Hesap Tablosu nesnesi seçin. - + No Drawing View Çizim görünümü yok - + Open Drawing View before attempting export to SVG. Çizim Önizlemeyi açmadan SVG dosyasını dışarı aktarmayın. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Seçim Uyarısı + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Seçilen kenar bir BSpline'dır. Yarıçap yaklaşık olacaktır. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Seçilen kenar bir BSpline'dır. Çap yaklaşık olacaktır. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Açı Ölçümü yapmak için iki düz kenar gerekir - + Need three points to make a 3 point Angle Dimension 3 noktalı bir Açı Ölçüsü oluşturmak için üç noktaya ihtiyacınız var - + There is no 3D object in your selection Seçiminizde 3D nesne yok - + There are no 3D Edges or Vertices in your selection Seçiminizde hiçbir 3D Kenarlar veya köşe noktası yoktur - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Yanlış seçim - - + + Select an object first Önce bir nesne seçin - - + + Too many objects selected Çok fazla nesne seçili - - + + Create a page first. Önce bir sayfa oluşturun. - - + + No View of a Part in selection. Seçimdeki Parçanın Görünümü Yok. - + No Feature with Shape in selection. Seçimdeki şeklin özelliği yok. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Tam olarak 1 sayfayı seçin. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tüm dosyalar (*. *) - + Export Page As PDF Sayfayı PDF olarak dışa aktar - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Sayfayı SVG olarak dışa aktar - + FreeCAD SVG Export FreeCAD SVG dışa aktarım - + Show drawing Çizimi göster - + Toggle KeepUpdated GüncelTutma Ayarı @@ -1121,12 +1306,12 @@ Metni güncellemek için tıklayın - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Ebatlar - + Arrow Style Ok Stili @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Birimlerde yazı boyutu öçlüsü - + Dimension arrowhead size in units Birimlerde OkBaşı boyut ölçüsü - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Dekorasyonlar - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Çizimde köşelerin boyutunu ayarlar - + Vertex Scale Nokta Ölçeği - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Tur - + Square Kare - + Section Line Style Bölüm çizgi stili - + Center Line Style Merkezi çizgi stili - + Matting Style Paspas Style - + Line type for centerlines Line type for centerlines - - + + NeverShow AslaGösterme - + Line color for sectionlines Line color for sectionlines - + Line Group Name Çizgi Grubu Adı - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Nokta Rengi - + Vertex display color Vertex display color - - + + Dash Kır - - + + Dot Noktalı - - + + DashDot Çizgi nokta - - + + DashDotDot DashDotDot - - + + Solid Katı - + Center Line Color Merkezi çizgi rengi - + Section Line Color Bölüm çizgi rengi @@ -1642,77 +1842,77 @@ TechDrawGui::MDIViewPage - + &Export SVG &SVG olarak dışarıya aktar - + Toggle &Keep Updated Ayarla & Güncel Tut - + Toggle &Frames Ayarla & Çerçeveler - + Export DXF Export DXF - + Export PDF PDF olarak dışa aktar - + Different orientation Ekran yönü - + The printer uses a different orientation than the drawing. Do you want to continue? Yazıcı çizim daha farklı bir yönelim kullanır. Devam etmek istiyor musunuz? - - + + Different paper size Farklı kağıt boyutu - - + + The printer uses a different paper size than the drawing. Do you want to continue? Yazıcı, çizimden farklı bir kağıt boyutu kullanıyor. Devam etmek istiyor musun? - + Opening file failed Dosya açılamadı - + Can not open file %1 for writing. %1 dosyasını yazmak için açamazsın. - + Save Dxf File DXF dosyasını kaydet - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seçili: @@ -1720,16 +1920,230 @@ Devam etmek istiyor musun? TechDrawGui::QGVPage - + Drawing page: Çizim sayfası: - + exported from FreeCAD document: FreeCAD belgesinden dışa aktarıldı: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Ok İşareti + + + + Dot + Noktalı + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Değer: + + + + Circular + Circular + + + + None + Hiçbiri + + + + Triangle + Üçgen + + + + Inspection + Inspection + + + + Hexagon + Altıgen + + + + Square + Kare + + + + Rectangle + Dikdörtgen + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Elementler + + + + Vertical + Dikey + + + + Horizontal + Yatay + + + + Aligned + Aligned + + + + Color + Renk + + + + Weight + Weight + + + + Style + Stil(tarz) + + + + NoLine + NoLine + + + + Solid + Katı + + + + Dash + Kır + + + + Dot + Noktalı + + + + DashDot + Çizgi nokta + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1807,124 +2221,130 @@ Devam etmek istiyor musun? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick işaretleme - - - + + + Dot Noktalı - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Renk - + Weight Weight - + Style Stil(tarz) - + NoLine NoLine - + Solid Katı - + Dash Kır - + DashDot Çizgi nokta - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2287,4 +2707,28 @@ Devam etmek istiyor musun? Değer: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm index b7dd78c79e..b0af3eeaa5 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 36c0d1bf88..ec68472273 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Вставити нотатку @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Файл - + Export page as SVG Експорт в SVG - + Export a page to an SVG file Експорт сторінки в SVG файл @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Файл - + Export page as DXF Export page as DXF - + Export a page to a DXF file Export a page to a DXF file - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Link a dimension to 3D geometry - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Вставити новий вимір кута @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Вставити новий розмір діаметру - + Insert a new diameter dimension feature Insert a new diameter dimension feature @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Вставити новий горизонтальний розмір - + Insert a new horizontal distance dimension Insert a new horizontal distance dimension @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insert a new vertical dimension - + Insert a new vertical distance dimension Insert a new vertical distance dimension @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Вставити новий лінійний розмір @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File Оберіть шаблон - + Template (*.svg *.dxf) Шаблон (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insert new default Page @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Вставити вигляд на сторінку @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insert Detail View @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insert Section View in Page @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insert Projection Group - + Insert multiple linked views of drawable object(s) Insert multiple linked views of drawable object(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Insert Spreadsheet view - + Inserts a view of a selected spreadsheet Inserts a view of a selected spreadsheet @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Вставити SVG-символ - + Insert symbol from a svg file Insert symbol from a svg file @@ -715,72 +820,77 @@ More functions - + Standard Стандартно - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Невірний вибір - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open Виберіть файл SVG для відкриття - + Scalable Vector Graphic Масштабована Векторна графіка - - + + Select at least one object. Оберіть принаймні один об'єкт. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Виберіть саме один об'єкт електронної таблиці. - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Ви не обрали 3D об'єкт - + There are no 3D Edges or Vertices in your selection Ви не обрали 3D кутів або вершин - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Некоректний вибір - - + + Select an object first Оберіть об'єкт для початку - - + + Too many objects selected Обрано забагато об'єктів - - + + Create a page first. Спочатку створіть сторінку. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Всі файли (*.*) - + Export Page As PDF Експорт в PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Експорт в SVG - + FreeCAD SVG Export FreeCAD експорт SVG - + Show drawing Показати креслення - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Розміри - + Arrow Style Тип стрілки @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Декоративні елементи - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Раунд - + Square Квадрат - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Тире - - + + Dot Крапка - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid Суцільне тіло - + Center Line Color Колір центральної лінії - + Section Line Color Section Line Color @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Експорт SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Експорт в PDF - + Different orientation Відмінна орієнтація - + The printer uses a different orientation than the drawing. Do you want to continue? Принтер використовує відмінну від креслення орієнтацію. Бажаєте продовжити? - - + + Different paper size Відмінний розмір паперу - - + + The printer uses a different paper size than the drawing. Do you want to continue? Принтер використовує відмінний від креслення розмір паперу. Бажаєте продовжити? - + Opening file failed Відкриття файлу не вдалося - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Вибрано: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Стрілка + + + + Dot + Крапка + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Значення: + + + + Circular + Circular + + + + None + Немає + + + + Triangle + Трикутник + + + + Inspection + Inspection + + + + Hexagon + Шестикутник + + + + Square + Квадрат + + + + Rectangle + Прямокутник + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Елементи + + + + Vertical + По вертикалі + + + + Horizontal + По горизонталі + + + + Aligned + Aligned + + + + Color + Колір + + + + Weight + Weight + + + + Style + Стиль + + + + NoLine + NoLine + + + + Solid + Суцільне тіло + + + + Dash + Тире + + + + Dot + Крапка + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + мм + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot Крапка - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Колір - + Weight Weight - + Style Стиль - + NoLine NoLine - + Solid Суцільне тіло - + Dash Тире - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Значення: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm index 1aab042f01..e78a6a8722 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index 50419dd5e8..af40417948 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation Insereix Anotació @@ -18,31 +34,31 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane - Insert a Section Plane + Insereix un pla de secció - + Inserts a view of a Section Plane from Arch Workbench - Inserts a view of a Section Plane from Arch Workbench + Insereix una vista d'un pla de secció des d'un banc de treball d'arquitectura CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insereix un grup clip @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Elimina vista del ClipGroup - + Remove a View from Clip group Elimina una vista del ClipGroup @@ -68,53 +84,100 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group - Add View to Clip group + Afig una vista al ClipGroup - + Add a View to Clip group Afig una vista al ClipGroup - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - - Insert a DraftWB object - Insert a DraftWB object + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw - + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + + Insert a DraftWB object + Insereix un objecte DraftWB + + + Insert a View of a Draft Workbench object - Insert a View of a Draft Workbench object + Insereix una vista d'un objecte d'un banc de treball d'esborrany CmdTechDrawExportPage - + File Fitxer - + Export page as SVG Exportar una pàgina com a SVG - + Export a page to an SVG file Exporta una pàgina a un fitxer SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Fitxer - + Export page as DXF Exporta la pàgina com a DXF - + Export a page to a DXF file Exporta una pàgina a un fitxer DXF - + Save Dxf File Guarda el fitxer Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view - Add a line to a view + Afig una línia a una vista CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry Enllaça una dimensió a una geometria 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension Insereix una nova cota angular de 3 punts @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension Insereix una nova cota angular @@ -235,31 +326,31 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon - Insert a new balloon + Insereix un globus nou CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension Insereix una nova cota de diàmetre - + Insert a new diameter dimension feature Insereix una nova propietat de cota de diàmetre @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension Insereix una nova cota horitzontal - + Insert a new horizontal distance dimension Insereix una nova cota de distància horitzontal @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension Insereix una nova cota vertical - + Insert a new vertical distance dimension Insereix una nova cota de distància vertical @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insereix una nova cota de longitud @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insereix una nova Pàgina utilitzant una Plantilla - + Select a Template File Selecciona un fitxer de plantilla - + Template (*.svg *.dxf) Plantilla (*.svg *.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page Insereix una nova Pàgina per defecte @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page Insereix una Vista a la Pàgina @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View Insereix una vista de detall @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page Insereix una vista de secció en la pàgina @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group Insereix un grup de projeccions - + Insert multiple linked views of drawable object(s) Insereix diverses vistes enllaçades d'objecte(s) dibuixable(s) + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation - Add a rich text annotation + Afig una anotació de text enriquida CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view Inserta vista de full de càlcul - + Inserts a view of a selected spreadsheet Inserta la vista d'un full de càlcul seleccionat @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Inserta un símbol SVG - + Insert symbol from a svg file Inserta un símbol des d'un fitxer svg @@ -547,7 +652,7 @@ Turn View Frames On/Off - Turn View Frames On/Off + Activa o desactiva els marcs de la vista @@ -555,38 +660,38 @@ Save changes - Save changes + Guarda els canvis Close editor - Close editor + Tanca l'editor Paragraph formatting - Paragraph formatting + Formatació del paràgraf Undo (CTRL+Z) - Undo (CTRL+Z) + Desfés (CTRL+Z) Undo - Undo + Desfés Redo - Redo + Refés Cut (CTRL+X) - Cut (CTRL+X) + Retalla (Ctrl+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Copia (Ctrl+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Apega (Ctrl+V) Paste - Paste + Apega Link (CTRL+L) - Link (CTRL+L) + Enllaç (Ctrl+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Cursiva (Ctrl+l) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Subratllat (Ctrl+U) @@ -651,52 +756,52 @@ Strikethrough - Strikethrough + Barrat Strike Out - Strike Out + Barrat Bullet list (CTRL+-) - Bullet list (CTRL+-) + Llista de pics (Ctrl+-) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Llista ordenada (Ctrl+=) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Disminueix el sagnat (Ctrl+,) Decrease indentation - Decrease indentation + Disminueix el sagnat Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Augmenta el sagnat (Ctrl+.) Increase indentation - Increase indentation + Augmenta el sagnat Text foreground color - Text foreground color + Color del primer pla del text Text background color - Text background color + Color de fons del text @@ -712,188 +817,201 @@ More functions - More functions + Més funcions - + Standard Estàndard - + Heading 1 - Heading 1 + Encapçalament 1 - + Heading 2 - Heading 2 + Encapçalament 2 - + Heading 3 - Heading 3 + Encapçalament 3 - + Heading 4 - Heading 4 + Encapçalament 4 - + Monospace - Monospace + Monospace - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + Elimina la formatació de caràcters + + + + Remove all formatting + Elimina tota la formatació + + + Edit document source - Edit document source + Edita la font del document - + Document source - Document source + Font del document - + Create a link - Create a link + Crea un enllaç - + Link URL: - Link URL: + URL de l'enllaç: - + Select an image - Select an image + Seleccioneu una imatge - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tot (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Selecció incorrecta - - + + No Shapes or Groups in this selection No hi ha formes o grups en aquesta selecció - - + + Select at least 1 DrawViewPart object as Base. Seleccioneu com a mínim 1 objecte DrawViewPart com a base. - + Select one Clip group and one View. - Select one Clip group and one View. + Seleccioneu un grup clip i una vista. - + Select exactly one View to add to group. - Select exactly one View to add to group. + Seleccioneu exactament una vista per a afegir al grup. - + Select exactly one Clip group. - Select exactly one Clip group. + Seleccioneu exactament un grup clip. - + Clip and View must be from same Page. Clip i Vista han de ser de la mateixa pàgina. - + Select exactly one View to remove from Group. - Select exactly one View to remove from Group. + Seleccioneu exactament una vista per a eliminar del grup. - + View does not belong to a Clip La Vista no pertany a un Clip - + Choose an SVG file to open Trieu un fitxer SVG per a obrir-lo - + Scalable Vector Graphic Gràfic vectorial escalable - - + + Select at least one object. Seleccioneu com a mínim un objecte. - + There is no Section Plane in selection. - There is no Section Plane in selection. + No hi ha cap pla de secció en la selecció. - + Select exactly one Spreadsheet object. Seleccioneu exactament un sol objecte full de càlcul. - + No Drawing View Sense vistes de dibuix - + Open Drawing View before attempting export to SVG. Obri les vistes de dibuix abans d'intentar l'exportació a SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -902,54 +1020,74 @@ Can not make a Dimension from this selection - Can not make a Dimension from this selection + No es pot crear una dimensió d'aquesta selecció - - Selection Warning - Avís de selecció + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - L'aresta seleccionada és una BSpline. El radi serà aproximat. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - L'aresta seleccionada és una BSpline. El diàmetre serà aproximat. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Es necessiten dues arestes rectes per a crear una cota d'angle - + Need three points to make a 3 point Angle Dimension - Need three points to make a 3 point Angle Dimension + Es necessiten 3 punts per a crear una cota d'angle de 3 punts - + There is no 3D object in your selection No hi ha cap objecte 3D en la selecció - + There are no 3D Edges or Vertices in your selection No hi ha cap aresta o vèrtex 3D en la selecció - - - - - - - - + + + + + + + + @@ -957,61 +1095,108 @@ Selecció incorrecta - - + + Select an object first Seleccioneu primer un objecte - - + + Too many objects selected Massa objectes seleccionats - - + + Create a page first. Creeu una pàgina primer - - + + No View of a Part in selection. - No View of a Part in selection. + No hi ha cap vista d'una peça en la selecció. - + No Feature with Shape in selection. - No Feature with Shape in selection. + No hi ha cap propietat amb forma en la selecció. - - + + + + + + + + Task In Progress - Task In Progress + Tasca en procés - - + + + + + + + + Close active task dialog and try again. - Close active task dialog and try again. + Tanca el quadre de diàleg de tasques actiu i intenta-ho altra vegada. - - + + + + + Selection Error - Selection Error + Error de selecció - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + No es pot adjuntar la guia. No s'ha seleccionat cap vista de base. - + + You must select a base View for the line. - You must select a base View for the line. + Heu de seleccionar una vista de base per a la línia. + + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection @@ -1036,7 +1221,7 @@ Create a page to insert. - Create a page to insert. + Creeu una pàgina per a inserir. @@ -1075,43 +1260,43 @@ Seleccioneu exactament un pàgina. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) - All Files (*.*) + Tots els fitxers (*.*) - + Export Page As PDF Exporta una pàgina com a PDF - + SVG (*.svg) - SVG (*.svg) + SVG (*.svg) - + Export page as SVG Exportar una pàgina com a SVG - + FreeCAD SVG Export Exportació de SVG de FreeCAD - + Show drawing Mostra el dibuix - + Toggle KeepUpdated Activa/desactiva l'actualització automàtica @@ -1121,24 +1306,34 @@ Feu clic per a actualitzar el text - + New Leader Line - New Leader Line + Línia guia nova - + Edit Leader Line - Edit Leader Line + Edita la línia guia Rich text creator - Rich text creator + Creador de text enriquit - + Rich text editor - Rich text editor + Editor de text enriquit + + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex @@ -1149,7 +1344,7 @@ Dimensions - + Arrow Style Estil de fletxes @@ -1186,7 +1381,7 @@ TechDraw Dimensions - TechDraw Dimensions + Dimensions TechDraw @@ -1231,171 +1426,176 @@ Append unit to Dimension text - Append unit to Dimension text + Afig una unitat al text de dimensió Dimension text color - Dimension text color + Color del text de dimensió Character to use to indicate Diameter dimension - Character to use to indicate Diameter dimension + Caràcter a utilitzar per a indicar la dimensió del diàmetre Use system setting for decimal places. - Use system setting for decimal places. + Utilitza els paràmetres del sistema per a les xifres decimals. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals - Number of decimal places if not using Global Decimals + El nombre de xifres decimals si no s'utilitzen els decimals globals - + Dimension font size in units Mida del tipus de lletra de la cota en unitats - + Dimension arrowhead size in units Mida de la punta de fletxa de la cota en unitats - + Default Format - Default Format + Format per defecte - + Custom format for Dimension text - Custom format for Dimension text + Format personalitzat per al text de dimensió - + Decorations Decoracions - + Color for centerlines - Color for centerlines + Color de les línies centrals - + Adjusts size of vertices in drawing Ajusta la mida dels vèrtex en el dibuix - + Vertex Scale Escala de vèrtex - + Round or Square outline in Detail view - Round or Square outline in Detail view + Contorn redó o quadrat en la vista de detall - + Round Redó - + Square Quadrat - + Section Line Style Selecció d'estil de línia - + Center Line Style Centre d'estil de línia - + Matting Style Estil estora - + Line type for centerlines - Line type for centerlines + Tipus de línia per a les línies centrals - - + + NeverShow No mostres mai - + Line color for sectionlines - Line color for sectionlines + Color de línia per a les línies de secció - + Line Group Name Nom del grup de la línia - + Name of entry in LineGroup CSV file - Name of entry in LineGroup CSV file + Nom de l'entrada en el fitxer CSV de Grup de línies - + Vertex Color Color del vèrtex - + Vertex display color - Vertex display color + Color de la visualització del vèrtex - - + + Dash Guió - - + + Dot Punt - - + + DashDot Guió punt - - + + DashDotDot Guió punt punt - - + + Solid Sòlid - + Center Line Color Color de la línia central - + Section Line Color Color de la línia de secció @@ -1476,7 +1676,7 @@ TechDraw General - TechDraw General + TechDraw general @@ -1621,7 +1821,7 @@ Editable Text Marker Size - Editable Text Marker Size + Mida del marcador del text editable @@ -1631,7 +1831,7 @@ Size of editable text marker in Templates (green dot). - Size of editable text marker in Templates (green dot). + Mida del marcador del text editable en plantilles (punt verd). @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Exporta SVG - + Toggle &Keep Updated Activa/desactiva l'&actualització automàtica - + Toggle &Frames Activa/desactiva els &marcs - + Export DXF - Export DXF + Exporta DXF - + Export PDF Exporta a PDF - + Different orientation Orientació diferent - + The printer uses a different orientation than the drawing. Do you want to continue? La impressora utilitza una orientació diferent de la del dibuix. Voleu continuar? - - + + Different paper size Mida de paper diferent - - + + The printer uses a different paper size than the drawing. Do you want to continue? La impressora utilitza una mida de paper diferent de la del dibuix. Voleu continuar? - + Opening file failed No s'ha pogut obrir el fitxer. - + Can not open file %1 for writing. - Can not open file %1 for writing. + No s'ha pogut obrir el fitxer %1 per a escriure-hi. - + Save Dxf File Guarda el fitxer Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionat: @@ -1719,14 +1919,228 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: - Drawing page: + Pàgina de dibuix: - + exported from FreeCAD document: - exported from FreeCAD document: + exportat des del document FreeCAD: + + + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Fletxa + + + + Dot + Punt + + + + Start Symbol + Símbol inicial + + + + Symbol: + Symbol: + + + + Value: + Valor: + + + + Circular + Circular + + + + None + Cap + + + + Triangle + Triangle + + + + Inspection + Inspection + + + + Hexagon + Hexàgon + + + + Square + Quadrat + + + + Rectangle + Rectangle + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Vista base + + + + Elements + Elements + + + + Vertical + Vertical + + + + Horizontal + Horitzontal + + + + Aligned + Aligned + + + + Color + Color + + + + Weight + Pes + + + + Style + Estil + + + + NoLine + Sense línia + + + + Solid + Sòlid + + + + Dash + Guió + + + + Dot + Punt + + + + DashDot + Guió punt + + + + DashDotDot + Guió punt punt + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Vista base + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Feu clic al botó esquerre per a definir un punt + + + + In progress edit abandoned. Start over. + S'ha abandonat l'edició en procés. Torna a començar. @@ -1797,135 +2211,141 @@ Do you want to continue? Leader Line - Leader Line + Línia guia Base View - Base View + Vista base - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol - Start Symbol + Símbol inicial - - + + No Symbol - No Symbol + Sense símbol - - + + Filled Triangle - Filled Triangle + Triangle emplenat - - + + Open Triangle - Open Triangle + Triangle obert - - + + Tick Tick - - - + + + Dot Punt - - + + Open Circle - Open Circle + Cercle obert - + + + Fork + Fork + + + End Symbol - End Symbol + Símbol final - + Color Color - + Weight - Weight + Pes - + Style Estil - + NoLine - NoLine + Sense línia - + Solid Sòlid - + Dash Guió - + DashDot Guió punt - + DashDotDot Guió punt punt - - + + Pick a starting point for leader line - Pick a starting point for leader line + Trieu un punt inicial per a la línia guia - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + Feu clic i arrossegueu els marcadors per a ajustar la línia guia - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + Feu clic al botó esquerre per a definir un punt - + Press OK or Cancel to continue - Press OK or Cancel to continue + Premeu D'acord o Cancel·la per a continuar - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + S'ha abandonat l'edició en procés. Torna a començar. @@ -2057,7 +2477,7 @@ Do you want to continue? Current primary view direction - Current primary view direction + La direcció actual de la vista primària @@ -2150,27 +2570,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + Bloc d'anotació de text enriquit Max Width - Max Width + Amplària màxima Base Feature - Base Feature + Propietat base Show Frame - Show Frame + Mostra el marc Start Rich Text Editor - Start Rich Text Editor + Inicia l'editor de text enriquit @@ -2286,4 +2706,28 @@ Do you want to continue? Valor: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm index 66f622ebd4..e53c6a9fdb 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts index b9278add82..e9841164da 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw Vẽ Công nghệ - - + + Insert Annotation Chèn chú thích @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw Vẽ Công nghệ - + Insert a Section Plane Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw Vẽ Công nghệ - - + + Insert Clip group Chèn nhóm clip @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw Vẽ Công nghệ - + Remove View from ClipGroup Xóa khung nhìn khỏi Nhóm clip - + Remove a View from Clip group Xóa một khung nhìn khỏi Nhóm clip @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw Vẽ Công nghệ - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Thêm một khung nhìn vào Nhóm clip - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw Vẽ Công nghệ - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + Vẽ Công nghệ + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + Vẽ Công nghệ + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + Vẽ Công nghệ + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File Tập tin - + Export page as SVG Xuất trang dưới dạng SVG - + Export a page to an SVG file Xuất một trang thành một tệp SVG @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File Tập tin - + Export page as DXF Xuất trang dưới dạng DXF - + Export a page to a DXF file Xuất một trang dưới dạng tệp DXF - + Save Dxf File Lưu tệp Dxf - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + Vẽ Công nghệ + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw Vẽ Công nghệ - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw Vẽ Công nghệ - - + + Link a dimension to 3D geometry Liên kết kích thước tới một hình+ 3D - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw Vẽ Công nghệ - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + Vẽ Công nghệ + + + + Insert a new 3 point Angle dimension Insert a new 3 point Angle dimension @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw Vẽ Công nghệ - - + + Insert a new angle dimension Chèn một kích thước góc mới @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw Vẽ Công nghệ - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw Vẽ Công nghệ - + Insert a new diameter dimension Chèn một kích thước đường kính mới - + Insert a new diameter dimension feature Chèn một tính năng kích thước đường kính mới @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw Vẽ Công nghệ - + Insert a new horizontal dimension Chèn một kích thước ngang mới - + Insert a new horizontal distance dimension Chèn một kích thước khoảng cách theo chiều ngang mới @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw Vẽ Công nghệ - + Insert a new vertical dimension Chèn một kích thước dọc mới - + Insert a new vertical distance dimension Chèn một kích thước khoảng cách theo chiều dọc mới @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw Vẽ Công nghệ - - + + Insert a new length dimension Chèn một kích thước chiều dài mới @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw Vẽ Công nghệ + - Insert new Page using Template Sử dụng Mẫu để chèn Trang mới - + Select a Template File Chọn một tệp Mẫu - + Template (*.svg *.dxf) Mẫu (*.svg*.dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw Vẽ Công nghệ + - Insert new default Page Chèn Trang mặc định mới @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw Vẽ Công nghệ + - Insert View in Page Chèn Khung nhìn vào Trang @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw Vẽ Công nghệ + - Insert Detail View Chèn Khung nhìn chi tiết @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw Vẽ Công nghệ + - Insert Section View in Page Chèn Phần Khung nhìn vào trang @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw Vẽ Công nghệ - + Insert Projection Group Chèn Nhóm Chiếu - + Insert multiple linked views of drawable object(s) Chèn nhiều khung nhìn của (các) đối tượng vẽ được liên kết với nhau + + CmdTechDrawQuadrant + + + TechDraw + Vẽ Công nghệ + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw Vẽ Công nghệ - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw Vẽ Công nghệ - + Insert Spreadsheet view Chèn khung nhìn bảng tính - + Inserts a view of a selected spreadsheet Chèn một khung nhìn của một bảng tính được chọn @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw Vẽ Công nghệ - + Insert SVG Symbol Chèn biểu tượng SVG - + Insert symbol from a svg file Chèn biểu tượng từ một tệp svg @@ -715,72 +820,77 @@ More functions - + Standard Tiêu chuẩn - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection Lựa chọn sai - - + + No Shapes or Groups in this selection No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. Chọn ít nhất một đối tượng Phần khung nhìn vẽ như là một đối tượng cơ sở. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip và Khung nhìn phải từ cùng một Trang. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Khung nhìn không thuộc về một Clip - + Choose an SVG file to open Chọn một tệp SVG để mở - + Scalable Vector Graphic Đồ họa véc tơ có thể mở rộng - - + + Select at least one object. Chọn ít nhất một đối tượng. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. Chọn chính xác một đối tượng bảng tính. - + No Drawing View Không có khung nhìn vẽ nào - + Open Drawing View before attempting export to SVG. Mở khung nhìn vẽ trước khi xuất sang tệp SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Bạn đã không chọn đối tượng 3D nào - + There are no 3D Edges or Vertices in your selection Bạn đã không chọn Cạnh và Đỉnh 3D nào - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Lựa chọn không đúng - - + + Select an object first Chọn một đối tượng trước - - + + Too many objects selected Đã chọn quá nhiều đối tượng - - + + Create a page first. Tạo một trang trước. - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Chọn chính xác một trang. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Xuất trang dưới dạng DXF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Xuất trang dưới dạng SVG - + FreeCAD SVG Export Xuất SVG FreeCAD - + Show drawing Hiển thị bản vẽ - + Toggle KeepUpdated Bật/tắt chế độ Tiếp tục cập nhật @@ -1121,12 +1306,12 @@ Nhấp chuột để cập nhật văn bản - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ Kích thước - + Arrow Style Kiểu mũi tên @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Kích thước cỡ phông tính bằng đơn vị - + Dimension arrowhead size in units Kích thước đầu mũi tên tính bằng đơn vị - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Trang trí - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Tròn - + Square Hình vuông - + Section Line Style Kiểu Phần Đường - + Center Line Style Kiểu Đường Trung tâm - + Matting Style Kiểu rải thảm - + Line type for centerlines Line type for centerlines - - + + NeverShow Không bao giờ hiển thị - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Nét - - + + Dot Chấm - - + + DashDot Nét chấm - - + + DashDotDot Nét chấm chấm - - + + Solid Chất rắn - + Center Line Color Màu Đường Trung tâm - + Section Line Color Màu Phần Đường @@ -1642,78 +1842,78 @@ TechDrawGui::MDIViewPage - + &Export SVG &Xuất SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF Xuất tệp PDF - + Different orientation Định hướng khác nhau - + The printer uses a different orientation than the drawing. Do you want to continue? Máy in sử dụng hướng khác với bản vẽ. Bạn có muốn tiếp tục? - - + + Different paper size Kích thước giấy khác nhau - - + + The printer uses a different paper size than the drawing. Do you want to continue? Máy in sử dụng kích cỡ giấy khác so với bản vẽ. Bạn có muốn tiếp tục? - + Opening file failed Không thể mở tệp - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Lưu tệp Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Đã chọn: @@ -1721,16 +1921,230 @@ Bạn có muốn tiếp tục? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + Mũi tên + + + + Dot + Chấm + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Giá trị: + + + + Circular + Circular + + + + None + Không + + + + Triangle + Tam giác + + + + Inspection + Inspection + + + + Hexagon + Hình lục giác + + + + Square + Hình vuông + + + + Rectangle + Hình chữ nhật + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + Thành phần + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + Màu + + + + Weight + Weight + + + + Style + Kiểu + + + + NoLine + NoLine + + + + Solid + Chất rắn + + + + Dash + Nét + + + + Dot + Chấm + + + + DashDot + Nét chấm + + + + DashDotDot + Nét chấm chấm + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1808,124 +2222,130 @@ Bạn có muốn tiếp tục? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Đánh dấu - - - + + + Dot Chấm - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color Màu - + Weight Weight - + Style Kiểu - + NoLine NoLine - + Solid Chất rắn - + Dash Nét - + DashDot Nét chấm - + DashDotDot Nét chấm chấm - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2288,4 +2708,28 @@ Bạn có muốn tiếp tục? Giá trị: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm index 13a3b63447..243e8aa69b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index 70b82f2aeb..79bf424aaf 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw 制图 - - + + Insert Annotation 插入批注 @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw 制图 - + Insert a Section Plane - Insert a Section Plane + 插入断面 - + Inserts a view of a Section Plane from Arch Workbench Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw 制图 - - + + Insert Clip group 插入剪辑组 @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw 制图 - + Remove View from ClipGroup 从剪辑组中删除视图 - + Remove a View from Clip group 从剪辑组中删除视图 @@ -68,53 +84,100 @@ CmdTechDrawClipPlus - + TechDraw 制图 - + Add View to Clip group - Add View to Clip group + 向剪辑组中添加视图 - + Add a View to Clip group 向剪辑组中添加视图 - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw 制图 - - Insert a DraftWB object - Insert a DraftWB object + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + 制图 - + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + 制图 + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + 制图 + + + + Insert a DraftWB object + 插入底图工作区对象 + + + Insert a View of a Draft Workbench object - Insert a View of a Draft Workbench object + 插入底图工作台对象视图 CmdTechDrawExportPage - + File 文件 - + Export page as SVG 以 SVG格式导出页面 - + Export a page to an SVG file 将页面导出为SVG文件 @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File 文件 - + Export page as DXF 导出页为 DXF - + Export a page to a DXF file 将页面导出到 DXF 文件 - + Save Dxf File 保存 Dxf 文件 - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + 制图 + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,41 +256,55 @@ CmdTechDrawLeaderLine - + TechDraw 制图 - - + + Add a line to a view - Add a line to a view + 在视图中添加线 CmdTechDrawLinkDimension - + TechDraw 制图 - - + + Link a dimension to 3D geometry 将一个尺寸链接到3D几何图形 - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw 制图 - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + 制图 + + + + Insert a new 3 point Angle dimension 插入新的3点角度尺寸 @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw 制图 - - + + Insert a new angle dimension 插入新的角度尺寸 @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw 制图 - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw 制图 - + Insert a new diameter dimension 插入新直径尺寸 - + Insert a new diameter dimension feature 插入新的直径尺寸特征 @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw 制图 - + Insert a new horizontal dimension 插入新的水平尺寸 - + Insert a new horizontal distance dimension 插入新的水平距离尺寸 @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw 制图 - + Insert a new vertical dimension 插入新的垂直尺寸 - + Insert a new vertical distance dimension 插入新的垂直距离尺寸 @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw 制图 - - + + Insert a new length dimension 插入新的长度尺寸 @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw 制图 + - Insert new Page using Template 使用模板插入新页面 - + Select a Template File 选择模板文件 - + Template (*.svg *.dxf) 模板 (*. svg *. dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw 制图 + - Insert new default Page 插入新的默认页 @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw 制图 + - Insert View in Page 在页面中插入视图 @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw 制图 + - Insert Detail View 插入详细信息视图 @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw 制图 + - Insert Section View in Page 在页面中插入剖面视图 @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw 制图 - + Insert Projection Group 插入投影组 - + Insert multiple linked views of drawable object(s) 插入多个可绘制对象的链接视图 + + CmdTechDrawQuadrant + + + TechDraw + 制图 + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,31 +594,31 @@ CmdTechDrawRichAnno - + TechDraw 制图 - - + + Add a rich text annotation - Add a rich text annotation + 添加一个富文本注释 CmdTechDrawSpreadsheet - + TechDraw 制图 - + Insert Spreadsheet view 插入电子表格视图 - + Inserts a view of a selected spreadsheet 插入所选电子表格的视图 @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw 制图 - + Insert SVG Symbol 插入 SVG 符号 - + Insert symbol from a svg file 从 svg 文件中插入符号 @@ -547,7 +652,7 @@ Turn View Frames On/Off - Turn View Frames On/Off + 打开或关闭视图框 @@ -555,38 +660,38 @@ Save changes - Save changes + 保存更改 Close editor - Close editor + 关闭编辑器 Paragraph formatting - Paragraph formatting + 段落格式化 Undo (CTRL+Z) - Undo (CTRL+Z) + 撤销 (CTRL+Z) Undo - Undo + 撤销 Redo - Redo + 重做 Cut (CTRL+X) - Cut (CTRL+X) + 剪切 (CTRL+X) @@ -596,7 +701,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + 复制 (CTRL+C) @@ -606,17 +711,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + 粘贴 (CTRL+V) Paste - Paste + 粘贴 Link (CTRL+L) - Link (CTRL+L) + 链接 (CTRL+L) @@ -631,7 +736,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + 斜体 (CTRL+I) @@ -641,7 +746,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + 下划线 (CTRL+U) @@ -651,17 +756,17 @@ Strikethrough - Strikethrough + 删除线 Strike Out - Strike Out + 删除线 Bullet list (CTRL+-) - Bullet list (CTRL+-) + 符号列表 (CTRL+-) @@ -671,32 +776,32 @@ Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + 减少缩进 (CTRL+)， Decrease indentation - Decrease indentation + 减少缩进 Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + 增加缩进 (CTRL+) Increase indentation - Increase indentation + 增加缩进 Text foreground color - Text foreground color + 文本前景色 Text background color - Text background color + 文本背景色 @@ -712,188 +817,201 @@ More functions - More functions + 更多功能 - + Standard 标准 - + Heading 1 - Heading 1 + 标题1 - + Heading 2 - Heading 2 + 标题2 - + Heading 3 - Heading 3 + 标题3 - + Heading 4 - Heading 4 + 标题4 - + Monospace - Monospace + 等宽 - - Remove character formatting - Remove character formatting - - - - Remove all formatting - Remove all formatting + + + + Remove character formatting + 删除字符格式 + + + + Remove all formatting + 删除所有格式 + + + Edit document source Edit document source - + Document source Document source - + Create a link - Create a link + 创建链接 - + Link URL: - Link URL: + 链接地址： - + Select an image - Select an image + 选择图片 - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; 所有 (*) QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection 选择错误 - - + + No Shapes or Groups in this selection 此选择中没有形状或组 - - + + Select at least 1 DrawViewPart object as Base. 选中至少1个绘制视图零件对象作为基准。 - + Select one Clip group and one View. - Select one Clip group and one View. + 选择一个剪辑组和一个视图。 - + Select exactly one View to add to group. - Select exactly one View to add to group. + 仅选择一个视图添加到组。 - + Select exactly one Clip group. - Select exactly one Clip group. + 仅选择一个剪辑组。 - + Clip and View must be from same Page. 剪辑和视图必须来自同一页。 - + Select exactly one View to remove from Group. - Select exactly one View to remove from Group. + 仅选择一个视图从组中移除。 - + View does not belong to a Clip 视图不属于剪辑 - + Choose an SVG file to open 选择一个SVG文件打开 - + Scalable Vector Graphic 可缩放矢量图形 - - + + Select at least one object. 请至少选择一个对象。 - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. 选择一个电子表格对象。 - + No Drawing View 无绘图视图 - + Open Drawing View before attempting export to SVG. 在尝试导出到 SVG 之前打开绘图视图。 + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - 选择警告 + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - 所选边是贝赛尔曲线。 半径将是近似值。 + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - 所选边是贝塞尔曲线，直径将是近似值。 + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension 需要两条直边才能形成角度尺寸 - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection 选择中没有3D 对象 - + There are no 3D Edges or Vertices in your selection 选择中没有3D 边或顶点 - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ 选择错误 - - + + Select an object first 首先选择对象 - - + + Too many objects selected 选择的对象过多 - - + + Create a page first. 首先创建一个页面。 - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ 仅选择1页。 - + PDF (*.pdf) PDF (* pdf) - - + + All Files (*.*) 所有文件(*.*) - + Export Page As PDF 以 PDF 格式导出页面 - + SVG (*.svg) SVG (*.svg) - + Export page as SVG 以 SVG格式导出页面 - + FreeCAD SVG Export FreeCAD SVG 导出 - + Show drawing 显示绘图 - + Toggle KeepUpdated 切换保持更新 @@ -1121,12 +1306,12 @@ 单击以更新文本 - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ 尺寸 - + Arrow Style 箭头样式 @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units 尺寸字体大小 (单位) - + Dimension arrowhead size in units 尺寸箭头大小 (单位) - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations 装饰 - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing 调整制图中顶点的大小 - + Vertex Scale 顶点比例 - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round 圆形 - + Square 正方形 - + Section Line Style 剖面线样式 - + Center Line Style 中心线样式 - + Matting Style 消光样式 - + Line type for centerlines Line type for centerlines - - + + NeverShow 不显示 - + Line color for sectionlines Line color for sectionlines - + Line Group Name 线组名称 - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color 顶点颜色 - + Vertex display color Vertex display color - - + + Dash 虚线 - - + + Dot 点 - - + + DashDot 点划线 - - + + DashDotDot 双点划线 - - + + Solid 实体 - + Center Line Color 中心线颜色 - + Section Line Color 截面线颜色 @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &导出 SVG - + Toggle &Keep Updated 切换和保持更新 - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF 导出PDF - + Different orientation 不同方向 - + The printer uses a different orientation than the drawing. Do you want to continue? 打印机和图纸使用了不同的定位位置。你想要继续吗？ - - + + Different paper size 不同的图纸大小 - - + + The printer uses a different paper size than the drawing. Do you want to continue? 打印机和当前图纸使用了不同大小的图纸，是否继续？ - + Opening file failed 打开文件失败 - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File 保存 Dxf 文件 - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 已选择: @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: 图纸页： - + exported from FreeCAD document: 从 FreeCAD 文档中导出: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + 箭头 + + + + Dot + 点 + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + 值: + + + + Circular + Circular + + + + None + 无 + + + + Triangle + 三角形 + + + + Inspection + Inspection + + + + Hexagon + 六边形 + + + + Square + 正方形 + + + + Rectangle + 矩形 + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + 元素 + + + + Vertical + 垂直 + + + + Horizontal + 水平 + + + + Aligned + Aligned + + + + Color + 颜色 + + + + Weight + 重量 + + + + Style + 样式 + + + + NoLine + NoLine + + + + Solid + 实体 + + + + Dash + 虚线 + + + + Dot + 点 + + + + DashDot + 点划线 + + + + DashDotDot + 双点划线 + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Y + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + 左键单击以设置点 + + + + In progress edit abandoned. Start over. + 放弃当前编辑。重新开始。 + + TechDrawGui::TaskGeomHatch @@ -1806,126 +2220,132 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick 刻度 - - - + + + Dot 点 - - + + Open Circle Open Circle - - End Symbol - End Symbol + + + Fork + Fork - + + End Symbol + 结束符号 + + + Color 颜色 - + Weight - Weight + 重量 - + Style 样式 - + NoLine NoLine - + Solid 实体 - + Dash 虚线 - + DashDot 点划线 - + DashDotDot 双点划线 - - + + Pick a starting point for leader line - Pick a starting point for leader line + 为引导线选取起始点 - + Click and drag markers to adjust leader line - Click and drag markers to adjust leader line + 点击并拖动标记来调整引导线 - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point - Left click to set a point + 左键单击以设置点 - + Press OK or Cancel to continue - Press OK or Cancel to continue + 按确定或取消继续 - + In progress edit abandoned. Start over. - In progress edit abandoned. Start over. + 放弃当前编辑。重新开始。 @@ -2150,27 +2570,27 @@ Do you want to continue? Rich Text Annotation Block - Rich Text Annotation Block + 富文本注释块 Max Width - Max Width + 最大宽度 Base Feature - Base Feature + 基础特征 Show Frame - Show Frame + 显示边框 Start Rich Text Editor - Start Rich Text Editor + 启动富文本编辑器 @@ -2286,4 +2706,28 @@ Do you want to continue? 值: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm index 0e432ab2aa..16fa81eb70 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index 9c690b32ba..c4247069cc 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -1,16 +1,32 @@ + + CmdMidpoints + + + Midpoints + Midpoints + + + + CmdQuadrant + + + Quadrant + Quadrant + + CmdTechDrawAnnotation - + TechDraw TechDraw - - + + Insert Annotation 插入註釋 @@ -18,17 +34,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert a Section Plane 插入分區平面 - + Inserts a view of a Section Plane from Arch Workbench 插入由Arch Workbench而來的分區平面視角 @@ -36,13 +52,13 @@ CmdTechDrawClip - + TechDraw TechDraw - - + + Insert Clip group Insert Clip group @@ -50,17 +66,17 @@ CmdTechDrawClipMinus - + TechDraw TechDraw - + Remove View from ClipGroup Remove View from ClipGroup - + Remove a View from Clip group Remove a View from Clip group @@ -68,35 +84,82 @@ CmdTechDrawClipPlus - + TechDraw TechDraw - + Add View to Clip group Add View to Clip group - + Add a View to Clip group Add a View to Clip group - CmdTechDrawDraftView + CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + + + Remove a cosmetic object + Remove a cosmetic object + + + + CmdTechDrawCosmeticVertex + + + TechDraw + TechDraw + + + + + Add a cosmetic vertex + Add a cosmetic vertex + + + + CmdTechDrawCosmeticVertexGrp + + + TechDraw + TechDraw + + + + + Insert Cosmetic Vertex + Insert Cosmetic Vertex + + + + Cosmetic Vertex + Cosmetic Vertex + + + + CmdTechDrawDraftView + + + TechDraw + TechDraw + + + Insert a DraftWB object Insert a DraftWB object - + Insert a View of a Draft Workbench object 插入由Draft Workbench 物件事角 @@ -104,17 +167,17 @@ CmdTechDrawExportPage - + File 檔案 - + Export page as SVG Export page as SVG - + Export a page to an SVG file 匯出此頁為SVG檔 @@ -122,31 +185,45 @@ CmdTechDrawExportPageDxf - + File 檔案 - + Export page as DXF 輸出本頁到DXF格式 - + Export a page to a DXF file 輸出本頁到DXF檔 - + Save Dxf File 儲存DXF檔 - + Dxf (*.dxf) Dxf (*.dxf) + + CmdTechDrawFaceCenterLine + + + TechDraw + TechDraw + + + + + Add a centerline to a Face(s) + Add a centerline to a Face(s) + + CmdTechDrawImage @@ -179,13 +256,13 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - - + + Add a line to a view Add a line to a view @@ -193,27 +270,41 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - - + + Link a dimension to 3D geometry 連結尺寸到3D幾何 - CmdTechDrawNewAngle3PtDimension + CmdTechDrawMidpoints - + TechDraw TechDraw - - + + + Add midpoint vertices + Add midpoint vertices + + + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + TechDraw + + + + Insert a new 3 point Angle dimension 插入新三點角度與尺寸 @@ -221,13 +312,13 @@ CmdTechDrawNewAngleDimension - + TechDraw TechDraw - - + + Insert a new angle dimension 插入新角度與尺寸 @@ -235,13 +326,13 @@ CmdTechDrawNewBalloon - + TechDraw TechDraw - - + + Insert a new balloon Insert a new balloon @@ -249,17 +340,17 @@ CmdTechDrawNewDiameterDimension - + TechDraw TechDraw - + Insert a new diameter dimension 插入新直徑尺寸 - + Insert a new diameter dimension feature 插入新直徑尺寸特徵 @@ -285,17 +376,17 @@ CmdTechDrawNewDistanceXDimension - + TechDraw TechDraw - + Insert a new horizontal dimension 插入新水平尺寸 - + Insert a new horizontal distance dimension 插入新水平距離尺寸 @@ -303,17 +394,17 @@ CmdTechDrawNewDistanceYDimension - + TechDraw TechDraw - + Insert a new vertical dimension 插入新垂直尺寸 - + Insert a new vertical distance dimension 插入新垂直距離尺寸 @@ -349,13 +440,13 @@ CmdTechDrawNewLengthDimension - + TechDraw TechDraw - - + + Insert a new length dimension Insert a new length dimension @@ -363,23 +454,23 @@ CmdTechDrawNewPage - + TechDraw TechDraw + - Insert new Page using Template Insert new Page using Template - + Select a Template File 選取範本 - + Template (*.svg *.dxf) 範本 (*. svg *. dxf) @@ -387,13 +478,13 @@ CmdTechDrawNewPageDef - + TechDraw TechDraw + - Insert new default Page 插入新的預設頁 @@ -415,13 +506,13 @@ CmdTechDrawNewView - + TechDraw TechDraw + - Insert View in Page 在頁面中插入視圖 @@ -429,13 +520,13 @@ CmdTechDrawNewViewDetail - + TechDraw TechDraw + - Insert Detail View 插入詳細資訊視圖 @@ -443,13 +534,13 @@ CmdTechDrawNewViewSection - + TechDraw TechDraw + - Insert Section View in Page 在頁面中插入節視圖 @@ -457,21 +548,35 @@ CmdTechDrawProjGroup - + TechDraw TechDraw - + Insert Projection Group 插入投影組 - + Insert multiple linked views of drawable object(s) 插入可繪製物件的多個連結視圖 + + CmdTechDrawQuadrant + + + TechDraw + TechDraw + + + + + Add quadrant vertices + Add quadrant vertices + + CmdTechDrawRedrawPage @@ -489,13 +594,13 @@ CmdTechDrawRichAnno - + TechDraw TechDraw - - + + Add a rich text annotation Add a rich text annotation @@ -503,17 +608,17 @@ CmdTechDrawSpreadsheet - + TechDraw TechDraw - + Insert Spreadsheet view 插入試算表視圖 - + Inserts a view of a selected spreadsheet 插入所選試算表的視圖 @@ -521,17 +626,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol 插入 SVG 符號 - + Insert symbol from a svg file 從 svg 檔中插入符號 @@ -715,72 +820,77 @@ More functions - + Standard 標準 - + Heading 1 Heading 1 - + Heading 2 Heading 2 - + Heading 3 Heading 3 - + Heading 4 Heading 4 - + Monospace Monospace - + + + + + + Remove character formatting Remove character formatting - + Remove all formatting Remove all formatting - + Edit document source Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -788,112 +898,120 @@ QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection 錯誤的選取 - - + + No Shapes or Groups in this selection 此選擇中沒有形狀或組 - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Clip and View must be from same Page. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip View does not belong to a Clip - + Choose an SVG file to open 選擇要開啟的 SVG 檔 - + Scalable Vector Graphic 可縮放向量圖檔 - - + + Select at least one object. Select at least one object. - + There is no Section Plane in selection. There is no Section Plane in selection. - + Select exactly one Spreadsheet object. 請僅選擇一個試算表物件 - + No Drawing View No Drawing View - + Open Drawing View before attempting export to SVG. Open Drawing View before attempting export to SVG. + + + - - - - - - - - - + + + + + + + + + Incorrect Selection @@ -906,50 +1024,70 @@ - - Selection Warning - Selection Warning + + Ellipse Curve Warning + Ellipse Curve Warning - Selected edge is a BSpline. Radius will be approximate. - Selected edge is a BSpline. Radius will be approximate. + Selected edge is an Ellipse. Radius will be approximate. Continue? + Selected edge is an Ellipse. Radius will be approximate. Continue? - - Selected edge is a BSpline. Diameter will be approximate. - Selected edge is a BSpline. Diameter will be approximate. + + + + + BSpline Curve Warning + BSpline Curve Warning - + + + Selected edge is a BSpline. Radius will be approximate. Continue? + Selected edge is a BSpline. Radius will be approximate. Continue? + + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? + Selected edge is an Ellipse. Diameter will be approximate. Continue? + + + + + Selected edge is a BSpline. Diameter will be approximate. Continue? + Selected edge is a BSpline. Diameter will be approximate. Continue? + + + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + @@ -957,62 +1095,109 @@ Incorrect selection - - + + Select an object first Select an object first - - + + Too many objects selected Too many objects selected - - + + Create a page first. 請先建立一個頁面 - - + + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - + + + + + + + + Task In Progress Task In Progress - - + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - + + + + + Selection Error Selection Error - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - + + You must select a base View for the line. You must select a base View for the line. + + + + No DrawViewPart objects in this selection + No DrawViewPart objects in this selection + + + + No base View in Selection. + No base View in Selection. + + + + You must select a Face(s) for the center line. + You must select a Face(s) for the center line. + + + + Nothing selected + Nothing selected + + + + At least 1 object in selection is not a part view + At least 1 object in selection is not a part view + + + + Unknown object type in selection + Unknown object type in selection + No TechDraw Page @@ -1075,43 +1260,43 @@ Select exactly 1 page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) 所有檔 (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG - + FreeCAD SVG Export FreeCAD SVG Export - + Show drawing 顯示圖面 - + Toggle KeepUpdated Toggle KeepUpdated @@ -1121,12 +1306,12 @@ Click to update text - + New Leader Line New Leader Line - + Edit Leader Line Edit Leader Line @@ -1136,10 +1321,20 @@ Rich text creator - + Rich text editor Rich text editor + + + New Center Line + New Center Line + + + + New Cosmetic Vertex + New Cosmetic Vertex + TechDrawGui::DlgPrefsTechDraw2Imp @@ -1149,7 +1344,7 @@ 尺寸 - + Arrow Style Arrow Style @@ -1249,153 +1444,158 @@ Use system setting for decimal places. - + + 5 - Fork + 5 - Fork + + + Number of decimal places if not using Global Decimals Number of decimal places if not using Global Decimals - + Dimension font size in units Dimension font size in units - + Dimension arrowhead size in units Dimension arrowhead size in units - + Default Format Default Format - + Custom format for Dimension text Custom format for Dimension text - + Decorations Decorations - + Color for centerlines Color for centerlines - + Adjusts size of vertices in drawing Adjusts size of vertices in drawing - + Vertex Scale Vertex Scale - + Round or Square outline in Detail view Round or Square outline in Detail view - + Round Round - + Square 正方形 - + Section Line Style Section Line Style - + Center Line Style Center Line Style - + Matting Style Matting Style - + Line type for centerlines Line type for centerlines - - + + NeverShow NeverShow - + Line color for sectionlines Line color for sectionlines - + Line Group Name Line Group Name - + Name of entry in LineGroup CSV file Name of entry in LineGroup CSV file - + Vertex Color Vertex Color - + Vertex display color Vertex display color - - + + Dash Dash - - + + Dot 點 - - + + DashDot DashDot - - + + DashDotDot DashDotDot - - + + Solid 實體 - + Center Line Color Center Line Color - + Section Line Color Section Line Color @@ -1642,76 +1842,76 @@ TechDrawGui::MDIViewPage - + &Export SVG &Export SVG - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + Export DXF Export DXF - + Export PDF 匯出 PDF - + Different orientation 不同方向 - + The printer uses a different orientation than the drawing. Do you want to continue? 印表機與圖面使用之方向不同，您要繼續嗎？ - - + + Different paper size 紙張尺寸不同 - - + + The printer uses a different paper size than the drawing. Do you want to continue? 印表機與圖面之紙張尺寸不同，您要繼續嗎？ - + Opening file failed 開啟檔案失敗 - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File 儲存DXF檔 - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 已選： @@ -1719,16 +1919,230 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: Drawing page: - + exported from FreeCAD document: exported from FreeCAD document: + + TechDrawGui::TaskBalloon + + + Balloon + Balloon + + + + Arrow + 箭頭 + + + + Dot + 點 + + + + Start Symbol + Start Symbol + + + + Symbol: + Symbol: + + + + Value: + Value: + + + + Circular + Circular + + + + None + 無 + + + + Triangle + 三角形 + + + + Inspection + Inspection + + + + Hexagon + 六角形 + + + + Square + 正方形 + + + + Rectangle + 矩形 + + + + Scale: + Scale: + + + + TechDrawGui::TaskCenterLine + + + Center Line + Center Line + + + + Base View + Base View + + + + Elements + 元素 + + + + Vertical + Vertical + + + + Horizontal + Horizontal + + + + Aligned + Aligned + + + + Color + 色彩 + + + + Weight + Weight + + + + Style + 風格 + + + + NoLine + NoLine + + + + Solid + 實體 + + + + Dash + Dash + + + + Dot + 點 + + + + DashDot + DashDot + + + + DashDotDot + DashDotDot + + + + Extend By + Extend By + + + + Make the line a little longer. + Make the line a little longer. + + + + mm + mm + + + + TechDrawGui::TaskCosVertex + + + Cosmetic Vertex + Cosmetic Vertex + + + + Base View + Base View + + + + Point Picker + Point Picker + + + + X + X + + + + Z + Z + + + + Y + Ÿ + + + + Pick a point for cosmetic vertex + Pick a point for cosmetic vertex + + + + Left click to set a point + Left click to set a point + + + + In progress edit abandoned. Start over. + In progress edit abandoned. Start over. + + TechDrawGui::TaskGeomHatch @@ -1806,124 +2220,130 @@ Do you want to continue? - Select Line Points - Select Line Points + Discard Changes + Discard Changes - + + Pick Points + Pick Points + + + Start Symbol Start Symbol - - + + No Symbol No Symbol - - + + Filled Triangle Filled Triangle - - + + Open Triangle Open Triangle - - + + Tick Tick - - - + + + Dot 點 - - + + Open Circle Open Circle - + + + Fork + Fork + + + End Symbol End Symbol - + Color 色彩 - + Weight Weight - + Style 風格 - + NoLine NoLine - + Solid 實體 - + Dash Dash - + DashDot DashDot - + DashDotDot DashDotDot - - + + Pick a starting point for leader line Pick a starting point for leader line - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - ESC or RMB to exit - ESC or RMB to exit - - - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -2286,4 +2706,28 @@ Do you want to continue? Value: + + TechDraw_CosmeticVertex + + + Insert a Cosmetic Vertix into a View + Insert a Cosmetic Vertix into a View + + + + TechDraw_Midpoints + + + Insert Cosmetic Vertex at midpoint of Edge(s) + Insert Cosmetic Vertex at midpoint of Edge(s) + + + + TechDraw_Quadrant + + + Insert Cosmetic Vertex at quadrant points of Circle(s) + Insert Cosmetic Vertex at quadrant points of Circle(s) + + diff --git a/src/Mod/Tux/Resources/translations/Tux_it.qm b/src/Mod/Tux/Resources/translations/Tux_it.qm index 500ae3a2e3..5238377894 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_it.qm and b/src/Mod/Tux/Resources/translations/Tux_it.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_it.ts b/src/Mod/Tux/Resources/translations/Tux_it.ts index f48fa33b56..1b3a8c01e5 100644 --- a/src/Mod/Tux/Resources/translations/Tux_it.ts +++ b/src/Mod/Tux/Resources/translations/Tux_it.ts @@ -61,7 +61,7 @@ Orbit style - Stile Orbita + Stile orbita diff --git a/src/Mod/Tux/Resources/translations/Tux_val-ES.qm b/src/Mod/Tux/Resources/translations/Tux_val-ES.qm index 666b2af6c8..5948658f6e 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_val-ES.qm and b/src/Mod/Tux/Resources/translations/Tux_val-ES.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_val-ES.ts b/src/Mod/Tux/Resources/translations/Tux_val-ES.ts index b63c83ba3c..13e32ebf1f 100644 --- a/src/Mod/Tux/Resources/translations/Tux_val-ES.ts +++ b/src/Mod/Tux/Resources/translations/Tux_val-ES.ts @@ -56,7 +56,7 @@ Settings - Settings + Paràmetres @@ -86,12 +86,12 @@ Undefined - Undefined + Sense definir Middle mouse button or H key. - Middle mouse button or H key. + Botó central del ratolí o la tecla H. diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm b/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm index c0a3b1d39e..4ff68b6f5b 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm and b/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts b/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts index 9a62e10fa3..e73a68308c 100644 --- a/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts +++ b/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts @@ -91,7 +91,7 @@ Middle mouse button or H key. - Middle mouse button or H key. + 鼠标中键或H键 diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ar.qm b/src/Mod/Web/Gui/Resources/translations/Web_ar.qm index 2265fa6285..c811f87b6a 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ar.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ar.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ar.ts b/src/Mod/Web/Gui/Resources/translations/Web_ar.ts index 44a000fe69..37693c445c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ar.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ar.ts @@ -62,7 +62,9 @@ Set URL - Set URL + CmdWebBrowserSetURL +../../Command.cpp:251 +../../Command.cpp:252 @@ -173,7 +175,8 @@ View source - View source + WebGui::WebView +../../BrowserView.cpp:335 diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.qm b/src/Mod/Web/Gui/Resources/translations/Web_de.qm index 14cb9d4e18..d0257592c6 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_de.qm and b/src/Mod/Web/Gui/Resources/translations/Web_de.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.ts b/src/Mod/Web/Gui/Resources/translations/Web_de.ts index 75fd2bbd78..4f9622c3d0 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_de.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_de.ts @@ -62,7 +62,7 @@ Set URL - Set URL + URL festlegen @@ -173,7 +173,7 @@ View source - View source + Quelltext anzeigen diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm index 36ab744d41..effc1d8af4 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm and b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts index 179b4b6795..26053eaffd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Configurar URL @@ -173,7 +173,7 @@ View source - View source + Ver fuente diff --git a/src/Mod/Web/Gui/Resources/translations/Web_eu.qm b/src/Mod/Web/Gui/Resources/translations/Web_eu.qm index c61848ba67..924a4441b2 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_eu.qm and b/src/Mod/Web/Gui/Resources/translations/Web_eu.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts index ba652be08e..69bdf5ca4a 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Ezarri URLa @@ -173,7 +173,7 @@ View source - View source + Bistarau iturburua diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.qm b/src/Mod/Web/Gui/Resources/translations/Web_fr.qm index 7e99af57ee..f633dee36f 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_fr.qm and b/src/Mod/Web/Gui/Resources/translations/Web_fr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts index 7ec82f1421..0b60d72d08 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Définir l’URL @@ -173,7 +173,7 @@ View source - View source + Afficher la source diff --git a/src/Mod/Web/Gui/Resources/translations/Web_gl.qm b/src/Mod/Web/Gui/Resources/translations/Web_gl.qm index eac66161fa..ee78d57ca0 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_gl.qm and b/src/Mod/Web/Gui/Resources/translations/Web_gl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts index 4aa167eb60..06657cde4c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Axustes URL @@ -173,7 +173,7 @@ View source - View source + Vista fonte diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.qm b/src/Mod/Web/Gui/Resources/translations/Web_hr.qm index 7378fc597c..2906602418 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_hr.qm and b/src/Mod/Web/Gui/Resources/translations/Web_hr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts index 7553d494ed..8734989ca4 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Postavi URL @@ -173,7 +173,7 @@ View source - View source + Pogledaj izvor diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.qm b/src/Mod/Web/Gui/Resources/translations/Web_hu.qm index b2de852c49..2d3f643caf 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_hu.qm and b/src/Mod/Web/Gui/Resources/translations/Web_hu.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts index bdbf79fc90..5b9f44cfbd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts @@ -62,7 +62,7 @@ Set URL - Set URL + URL meghatározás @@ -173,7 +173,7 @@ View source - View source + Forrás nézet diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.qm b/src/Mod/Web/Gui/Resources/translations/Web_it.qm index f9813006ba..43414e5641 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_it.qm and b/src/Mod/Web/Gui/Resources/translations/Web_it.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.ts b/src/Mod/Web/Gui/Resources/translations/Web_it.ts index fe90ae735a..6e3a486f2a 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_it.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_it.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Imposta URL @@ -173,7 +173,7 @@ View source - View source + Visualizza l'origine diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.qm b/src/Mod/Web/Gui/Resources/translations/Web_ja.qm index d8e93c9e6b..5fb4e927c3 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ja.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ja.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts index de455acdbf..6a4707d155 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts @@ -62,7 +62,7 @@ Set URL - Set URL + URLを設定 @@ -173,7 +173,7 @@ View source - View source + ソース表示 diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm index d8c037913b..fe64eba85e 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm and b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts index 0041320d09..10abd9e9bb 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Defina URL @@ -173,7 +173,7 @@ View source - View source + Ver fonte diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.qm b/src/Mod/Web/Gui/Resources/translations/Web_ru.qm index e5a3db4a2b..ea6bf1a93c 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ru.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ru.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts index e2d5f23ddf..2604a3493b 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Установить URL @@ -173,7 +173,7 @@ View source - View source + Просмотр HTML-кода diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sl.qm b/src/Mod/Web/Gui/Resources/translations/Web_sl.qm index c9633d4e9d..5e40450ab6 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_sl.qm and b/src/Mod/Web/Gui/Resources/translations/Web_sl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts index ab80b3319f..af59ae6647 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Nastavi URL @@ -173,7 +173,7 @@ View source - View source + Prikaz vira diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.qm b/src/Mod/Web/Gui/Resources/translations/Web_uk.qm index b4f04f47b5..023e88f99f 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_uk.qm and b/src/Mod/Web/Gui/Resources/translations/Web_uk.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts index 8d83b61df7..fd65fe5426 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Задати URL @@ -173,7 +173,7 @@ View source - View source + Переглянути вихідний код diff --git a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm index 7778288855..ede98fdae4 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm and b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts index 37463fc450..f6b44f1614 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts @@ -62,7 +62,7 @@ Set URL - Set URL + Estableix l'URL @@ -173,7 +173,7 @@ View source - View source + Visualitza la vista diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm index d4ded942ca..942562273c 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm and b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts index b05bba67f1..2e818d91ba 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts @@ -62,7 +62,7 @@ Set URL - Set URL + 设置链接 @@ -150,7 +150,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. + 加载文件时出错。有些数据可能已经修改或未全部恢复。在报告视图中查看有关对象的更具体信息。 @@ -173,7 +173,7 @@ View source - View source + 查看来源