From 2e4dcfc22ac3cd4dd555cba28fa72e3fa2c81e27 Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Wed, 8 Jun 2022 12:32:59 +0200 Subject: [PATCH] Generated ts files --- src/Gui/Language/FreeCAD.ts | 44 +-- src/Mod/Arch/Resources/translations/Arch.ts | 66 ++--- src/Mod/Draft/Resources/translations/Draft.ts | 124 ++++---- src/Mod/Fem/Gui/Resources/translations/Fem.ts | 208 +++++++------ .../Mesh/Gui/Resources/translations/Mesh.ts | 2 +- .../Part/Gui/Resources/translations/Part.ts | 6 +- .../Gui/Resources/translations/PartDesign.ts | 26 +- .../Path/Gui/Resources/translations/Path.ts | 212 +++++++------- .../Robot/Gui/Resources/translations/Robot.ts | 12 +- .../Gui/Resources/translations/Sketcher.ts | 78 ++--- .../Gui/Resources/translations/TechDraw.ts | 276 +++++++++--------- 11 files changed, 548 insertions(+), 506 deletions(-) diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 5cb50ea688..4cdae7a1ec 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -221,8 +221,8 @@ - + Transform @@ -6791,66 +6791,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X + + - - Y + + - - Z + + - - User defined... + - Wrong direction + - Direction must not be the null vector @@ -6881,9 +6881,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros @@ -9139,8 +9139,8 @@ Please open a browser window and type in: http://localhost:%1. - + Transform @@ -10324,9 +10324,9 @@ the current copy will be lost. + - Unnamed @@ -11978,12 +11978,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric - + Set NaviCube to Isometric mode @@ -11991,12 +11991,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic - + Set View to Orthographic mode @@ -12004,12 +12004,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective - + Set View to Perspective mode @@ -12017,12 +12017,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit - + Zoom so that model fills the view diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 9ff3aea9e6..926f2d5735 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -95,14 +95,14 @@ - + The length of this element, if not based on a profile - + The width of this element, if not based on a profile @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element @@ -135,8 +135,8 @@ - + The facemaker type to use to build the profile of this object @@ -425,14 +425,14 @@ - + The height of this object - + The computed floor area of this floor @@ -850,9 +850,9 @@ - + The type of this building @@ -956,8 +956,8 @@ - + The type of this object @@ -1147,20 +1147,20 @@ - + An optional description for this component - + An optional tag for this component - + The shape of this object @@ -1180,8 +1180,8 @@ - + The line width of this object @@ -1664,8 +1664,8 @@ - + The name of the font @@ -1675,8 +1675,8 @@ - + The size of the text font @@ -2339,23 +2339,23 @@ - + Length - + Width - + Height @@ -2387,8 +2387,8 @@ - + Facemaker returned an error @@ -2500,8 +2500,8 @@ - + Couldn't compute a shape @@ -2768,21 +2768,21 @@ - + - + Remove - - + + Add @@ -2927,9 +2927,9 @@ Floor creation aborted. - + Axes @@ -2944,8 +2944,8 @@ Floor creation aborted. - + Please select only one base object or none @@ -2997,10 +2997,10 @@ Floor creation aborted. - - + + Error: Couldn't determine character encoding @@ -3018,8 +3018,8 @@ Floor creation aborted. - + Please select a base object @@ -3606,9 +3606,9 @@ Site creation aborted. - + Description @@ -3623,8 +3623,8 @@ Site creation aborted. - + Export CSV File @@ -3692,16 +3692,16 @@ Site creation aborted. - + Value - + Unit diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index af1d01699d..a57ff232b0 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -39,16 +39,16 @@ - + Radius to use to fillet the corners - + Size of the chamfer to give to the corners @@ -63,12 +63,12 @@ - - - - + + + + The area of this object @@ -239,10 +239,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN&ap - - + + Create a face @@ -294,8 +294,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN&ap - + Show the individual array elements (only for Link arrays) @@ -898,33 +898,33 @@ This property is read-only, as the number depends on the points contained within - + The size of the text - + The font of the text + - The vertical alignment of the text - + Text color - + Line spacing (relative to font size) @@ -1488,16 +1488,16 @@ from menu Tools -> Addon Manager - - + + True - - + + False @@ -4045,13 +4045,13 @@ such as "Arial:Bold" - + mm @@ -4363,9 +4363,9 @@ from the Addon Manager. + - Import options @@ -5243,11 +5243,11 @@ To enabled FreeCAD to download these libraries, answer Yes. + - Copy @@ -5919,41 +5919,41 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - - + + + + - - - - + + + No active document. Aborting. - - + - - + + + Wrong input: object not in document. @@ -6376,6 +6376,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab + @@ -6388,15 +6389,14 @@ Not available if Draft preference option 'Use Part Primitives' is enab - Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. @@ -6428,10 +6428,10 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - + + Wrong input: must be a list of strings or a single string. @@ -6442,12 +6442,12 @@ Not available if Draft preference option 'Use Part Primitives' is enab + - - + Wrong input: must be a number. @@ -6987,10 +6987,10 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - + + Pick first point @@ -7083,8 +7083,8 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Pick distance @@ -7212,8 +7212,8 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Please select exactly two objects, the base object and the path object, before calling this command. @@ -7304,8 +7304,8 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Pick opposite point @@ -7559,8 +7559,8 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Some subelements could not be moved. @@ -7730,16 +7730,16 @@ The final angle will be the base angle plus this amount. - - + + Task panel: - - + + At least one element must be selected. @@ -7749,19 +7749,19 @@ The final angle will be the base angle plus this amount. - - + + Selection is not suitable for array. - - - - + + + + Object: @@ -7781,16 +7781,16 @@ The final angle will be the base angle plus this amount. - - + + Fuse: - - + + Create Link array: @@ -7825,9 +7825,9 @@ The final angle will be the base angle plus this amount. - - + + Aborted: @@ -7857,8 +7857,8 @@ The final angle will be the base angle plus this amount. - + Center reset: @@ -7883,8 +7883,8 @@ The final angle will be the base angle plus this amount. - + Center of rotation: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 9b3a2fd0a9..95c9b0472c 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem - + Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem - + Region clip filter - + Define/create a clip filter which uses functions to define the cliped region - + Wrong selection - + Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem - + Function cut filter - + Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem - + Line clip filter - + Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem - + Data at point clip filter - + Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem - + Filter functions - + Functions for use in postprocessing filter... - + Plane - + Sphere @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + + + + + Stress [MPa] + Plot Y-Axis Label + + + + + Linearized Stresses + Plot title + + + + + Membrane + Plot legend item label + + + + + Membrane and Bending + Plot legend item label + + + + + Total + Plot legend item label + + + + Fem - + Stress linearization plot - + Define/create stress linearization plots - - + + Wrong selection - - + + Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem - + Post pipeline from result - + Creates a post processing pipeline from a result object - + Wrong selection type - + Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem - + Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem - + Warp filter - + Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ - + Create function - + Create pipeline from result @@ -1376,12 +1412,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius @@ -3012,7 +3048,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function @@ -3024,11 +3060,17 @@ that "MAXKOI" needs to be increased. Data along a line options + + + Length + X-Axis plot label + + FemGui::TaskPostDataAtPoint - + Data at point options @@ -3052,7 +3094,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options @@ -3060,7 +3102,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options @@ -3502,7 +3544,10 @@ that "MAXKOI" needs to be increased. + + + @@ -3511,9 +3556,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm @@ -3528,11 +3570,11 @@ that "MAXKOI" needs to be increased. + + - - Parameter @@ -3562,9 +3604,9 @@ that "MAXKOI" needs to be increased. - - + + Constraint Properties @@ -3579,14 +3621,14 @@ that "MAXKOI" needs to be increased. - - - + + - - + + + unspecified @@ -3689,30 +3731,30 @@ that "MAXKOI" needs to be increased. - + Velocity x: - + Velocity y: - + Velocity z: - - - + + + m/s @@ -3905,26 +3947,26 @@ that "MAXKOI" needs to be increased. + + + + + + - - - - - - A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? @@ -4056,10 +4098,10 @@ that "MAXKOI" needs to be increased. - - + + Are you sure you want to continue? @@ -4408,10 +4450,10 @@ following referencing objects might be lost: - - + + Object dependencies diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts index 4c12f2312e..b0e5ab4e22 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts @@ -2383,8 +2383,8 @@ Please visit http://www.openscad.org/index.html to install it. - + Leave info mode diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 2e0fea2de0..9848ea6908 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -5934,20 +5934,20 @@ Do you want to continue? - + Face - + Edge - + Vertex diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index 4a9765dc9a..7213f2aa61 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -3518,28 +3518,28 @@ click again to end selection - - - - + + + + A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? @@ -3808,14 +3808,14 @@ This may lead to unexpected results. - + Vertical sketch axis - + Horizontal sketch axis @@ -3867,11 +3867,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr - - - + + + Edit %1 diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index af4e821ec8..5bdfbcafc9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify @@ -58,10 +58,10 @@ - + Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ - + Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code @@ -167,8 +167,8 @@ - + The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ - - + + Make True, if specifying a Start Point @@ -367,44 +367,44 @@ - + Width of tags. - + Height of tags. - + Angle of tag plunge and ascent. - + Radius of the fillet for the tag. - + Locations of inserted holding tags - + IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation @@ -796,8 +796,8 @@ - + Uses the outline of the base geometry. @@ -868,9 +868,9 @@ + - Percent of cutter diameter to step over on each pass @@ -1016,9 +1016,9 @@ + - Additional base objects to be engraved @@ -1965,31 +1965,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form @@ -2150,9 +2150,9 @@ - + Add @@ -2162,10 +2162,10 @@ - - + + Remove @@ -2175,8 +2175,8 @@ - + Clear @@ -2267,53 +2267,53 @@ - + Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... - + Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down @@ -2364,53 +2364,53 @@ - - - - + + + + ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode @@ -2420,20 +2420,20 @@ - - - - + + + + Tool Controller - + Coolant @@ -2458,8 +2458,8 @@ - + Step Over Percent @@ -2549,8 +2549,8 @@ - + Use Outline @@ -2560,10 +2560,10 @@ - - + + Direction @@ -2883,8 +2883,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2904,8 +2904,8 @@ - + Use Start Point @@ -3138,15 +3138,15 @@ - + Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3472,8 +3472,8 @@ - + Operation @@ -4025,8 +4025,8 @@ For example: - + Choose a Path Job @@ -4131,8 +4131,8 @@ For example: - + Edit @@ -4168,8 +4168,8 @@ For example: - + %s is not a Base Model object of the job %s @@ -4718,14 +4718,14 @@ Aborting op creation - + Outside - + Inside @@ -5126,22 +5126,22 @@ Aborting op creation Path_Dressup - + Please select one path object - + The selected object is not a path - + Please select a Path object @@ -5462,14 +5462,14 @@ Aborting op creation - + The selected object is not a path - + Please select a Profile object @@ -6022,15 +6022,15 @@ Aborting op creation Path_Profile - + Profile - + Profile entire model, selected face(s) or selected edge(s) @@ -7044,8 +7044,8 @@ Aborting op creation - + Dressup diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot.ts b/src/Mod/Robot/Gui/Resources/translations/Robot.ts index 07c3022c42..bea131dfab 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection @@ -381,11 +381,11 @@ - + Select one Robot and one Trajectory object. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index a80680ba90..57edaf7ad8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -1688,11 +1688,11 @@ invalid constraints, degenerated geometry, etc. + + - - Add coincident constraint @@ -2326,6 +2326,39 @@ invalid constraints, degenerated geometry, etc. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2457,39 +2490,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection @@ -2553,6 +2553,8 @@ invalid constraints, degenerated geometry, etc. + + @@ -2569,8 +2571,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint @@ -2672,6 +2672,7 @@ invalid constraints, degenerated geometry, etc. + @@ -2679,7 +2680,6 @@ invalid constraints, degenerated geometry, etc. - Error @@ -3152,9 +3152,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + CAD Kernel Error diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index fe68222893..afd0e7eca3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -1857,8 +1857,8 @@ - + Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection @@ -2596,9 +2596,6 @@ - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection @@ -2707,11 +2707,6 @@ - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ + - Are you sure you want to continue? @@ -3247,19 +3247,19 @@ it has a weld symbol that would become broken. - + - - - + + + Object dependencies @@ -5081,47 +5081,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line - + Base View - + Elements - + Orientation - + Top to Bottom line - + Vertical - + Left to Right line - + Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5129,92 +5129,92 @@ Do you want to continue? - + Aligned - + Shift Horizontal - + Move line -Left or +Right - + Shift Vertical - + Move line +Up or -Down - + Rotate - + Rotate line +CCW or -CW - + Extend By - + Make the line a little longer. - + mm - + Color - + Weight - + Style - + Continuous - + Dash - + Dot - + DashDot - + DashDotDot @@ -5222,38 +5222,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex - + Base View - + Point Picker - + Position from the view center - + Position - + X - + Y @@ -5330,312 +5330,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols - + GD&T - + Straightness - + Flatness - + Circularity - + Cylindricity - + Parallelism - + Perpendicularity - + Angularity - + Profile of a line - + Profile of a surface - + Circular runout - + Total runout - + Position - + Concentricity - + Symmetry - + Modifiers - + derived geometry element - + Minimax (Tschebyschew) - + Hull condition - + Free state - + Least square geometry element - + Least material condition (LMC) - + Maximum material condition (MMC) - + least inscribed geometry element - + Projected tolerance zone - + Reciprocity condition - + Regardless of feature size (RFS) - + Tangent plane - + Unequal Bilateral - + most inscribed geometry element - + Radius & Diameter - + Radius - + Diameter - + Radius of sphere - + Diameter of sphere - + Square - + Angles - + Degree - + (Arc) Minute - + (Arc) Second - + (Arc) Tertie - + Other - + Taper - + Slope - + Counterbore - + Countersink - + Plus - Minus - + Centerline - + Left/right arrow - + Downward arrow - + Multiplication sign - + Greek Letters - + Capital delta - + Capital sigma - + Capital omega - + Small mu - + Small sigma - + Small phi - + Small omega - + Format: - + Preview: @@ -5648,68 +5648,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor - + Base View - + Detail View - + Click to drag detail highlight to new position - + Drag Highlight - + X - + x position of detail highlight within view - + Y - + y position of detail highlight within view - + Radius - + size of detail view - + Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5717,37 +5717,37 @@ Custom: custom scale factor is used - + Page - + Automatic - + Custom - + Scale Factor - + scale factor for detail view - + Reference - + reference label