diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index ef261795b9..a58cd26e31 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -3228,10 +3228,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - - Workbench Name @@ -3248,6 +3244,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4435,31 +4435,31 @@ The 'Status' column shows whether the document could be recovered. - Around y-axis: + Pitch (around y-axis): - Around z-axis: + Roll (around x-axis): - Around x-axis: + Yaw (around z-axis): - Rotation around the x-axis + Yaw (around z-axis) - Rotation around the y-axis + Pitch (around y-axis) - Rotation around the z-axis + Roll (around the x-axis) - Euler angles (xy'z'') + Euler angles (zy'x'') @@ -5973,6 +5973,18 @@ Do you want to specify another directory? Vietnamese + + Bulgarian + + + + Greek + + + + Spanish, Argentina + + Gui::TreeDockWidget @@ -6919,6 +6931,34 @@ Document: Physical path: + + Could not save document + + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + + Document not saved + + + + The document%1 could not be saved. Do you want to cancel closing it? + + + + %1 Document(s) not saved + + + + Some documents could not be saved. Do you want to cancel closing? + + SelectionFilter @@ -9719,6 +9759,10 @@ Do you still want to proceed? Special Ops + + Axonometric + + testClass diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index 7112c6c5ca..a5ddcc8f2a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -3,7 +3,7 @@ AddonInstaller - + Installed location @@ -96,97 +96,97 @@ - + Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. - + Retrieving description... - + Retrieving info from - + An update is available for this addon. - + This addon is already installed. - + Retrieving info from git - + Retrieving info from wiki - + GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench - + Missing python module - + Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench - + Please install the missing components first. - + Error: Unable to download - + Successfully installed - + GitPython not installed! Cannot retrieve macros from git @@ -206,72 +206,72 @@ - + This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed - + Python Markdown library is missing. diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 3f82940b26..f2110996d6 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -865,7 +865,7 @@ beyond the dimension line - + If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1063,6 +1063,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + + Dialog @@ -1402,27 +1407,27 @@ from menu Tools -> Addon Manager - + Toggles Grid On/Off - + Object snapping - + Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off @@ -2776,12 +2781,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap - + Toggles Grid On/Off - + Toggle Draft Grid @@ -5079,7 +5084,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap @@ -6152,17 +6157,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + custom - + Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 4f4a6ffe68..99f8010f96 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -74,11 +74,6 @@ Geometry reference selector for a - - - Geometry reference selector for a - - Add @@ -134,6 +129,11 @@ Solid + + + Geometry reference selector for a + + SolidSelector diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts index 4d4ef9d680..262a203b70 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts @@ -488,7 +488,19 @@ A value in the range of 0.2-10. - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + + You have selected a shape without faces. +Select a different shape, please. + + + + Select a shape for meshing, first. diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index d91f8bace4..6f107465b6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -248,6 +248,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + + + + + Split objects where they intersect + + Boolean fragments @@ -325,16 +335,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to Slice to compound - - - Boolean Fragments - - - - - Split objects where they intersect - - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index ec6dcd191e..7a49c7a7b3 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - - - - - Should the operation be limited by the stock object or by the bounding box of the base object - - - - - Step over percentage of the drop cutter path - - - - - Z-axis offset from the surface of the object - - - - - The Sample Interval. Small values cause long wait times - - - - - Enable optimization which removes unnecessary points from G-Code output - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - - - - - Depth used to identify waste areas to ignore. - - - - - Cut through waste to depth at model edge, releasing the model. - - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied - - - The base geometry of this toolpath - - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object + + + Controls how tool moves around corners. Default=Round + + Maximum distance before a miter join is truncated @@ -699,13 +649,63 @@ - - The library to use to generate the path + + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + + + + + Step over percentage of the drop cutter path + + + + + Z-axis offset from the surface of the object + + + + + The Sample Interval. Small values cause long wait times + + + + + Enable optimization which removes unnecessary points from G-Code output + + + + + The completion mode for the operation: single or multi-pass + + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + + Ignore areas that proceed below specified depth. + + + + + Depth used to identify waste areas to ignore. + + + + + Cut through waste to depth at model edge, releasing the model. + + + + + The base geometry of this toolpath @@ -987,13 +987,13 @@ - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + + + + + Consider toggling the 'InverseAngle' property and recomputing. + + + + + Multiple faces in Base Geometry. + + + + + Depth settings will be applied to all faces. + + + + + EnableRotation property is 'Off'. + + Unable to create path for face(s). @@ -1217,31 +1242,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - - - - - Consider toggling the 'InverseAngle' property and recomputing. - - - - - Multiple faces in Base Geometry. - - - - - Depth settings will be applied to all faces. - - - - - EnableRotation property is 'Off'. - - Ignoring non-horizontal Face @@ -1982,6 +1982,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + Normal @@ -2032,16 +2042,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. - - - Pocket Shape - - - - - Creates a Path Pocket object from a face or faces - - 3D Pocket @@ -2175,13 +2175,13 @@ If it is necessary to set the FinalDepth manually please select a different oper - - For open edges, verify Final Depth for this operation. + + Check edge selection and Final Depth requirements for profiling open edge(s). - - Check edge selection and Final Depth requirements for profiling open edge(s). + + For open edges, verify Final Depth for this operation. @@ -3452,16 +3452,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - - - - - Creates a Path Dess-up object from a selected path - - Please select one path object @@ -3479,6 +3469,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object + + + Dress-up + + + + + Creates a Path Dess-up object from a selected path + + Path_DressupAxisMap @@ -3951,6 +3951,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object + + + The selected object is not a path + + + Please select one path object @@ -3966,12 +3972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop - - - The selected object is not a path - - - Path_Inspect @@ -4218,11 +4218,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - - Check the path job for common errors @@ -4473,6 +4468,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date + + + The Job has no selected Base object. + + It appears the machine limits haven't been set. Not able to check path extents. @@ -4628,6 +4628,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + + Add Tool Controller to the Job @@ -4638,11 +4643,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller - - - Tool Number to Load - - Path_ToolTable @@ -4669,6 +4669,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4679,11 +4684,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - - Path_Waterline @@ -4718,11 +4718,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library + + + Tooltable JSON (*.json) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + Open tooltable + + + Save tooltable + + + + + Rename Tooltable + + + + + Enter Name: + + + + + Add New Tool Table + + + + + Delete Selected Tool Table + + + + + Rename Selected Tool Table + + Tooltable editor @@ -4933,11 +4978,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - - Tooltable XML (*.xml) @@ -4953,46 +4993,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property - - - Rename Tooltable - - - - - Enter Name: - - - - - Add New Tool Table - - - - - Delete Selected Tool Table - - - - - Rename Selected Tool Table - - - - - Tooltable JSON (*.json) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts index 19d504ad36..3141d50f51 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts @@ -243,7 +243,7 @@ - + Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 8ab8a1175c..acbae7bba5 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -2652,7 +2652,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space @@ -2662,12 +2664,12 @@ invalid constraints, degenerated geometry, etc. - + Swap constraint names - + Rename sketch constraint @@ -2735,42 +2737,42 @@ invalid constraints, degenerated geometry, etc. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -3880,12 +3882,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Unnamed constraint - + Only the names of named constraints can be swapped. @@ -4607,11 +4609,6 @@ Defaults to: %N = %V DimensionalStringFormat - - - Mod/Sketcher - - Visibility automation @@ -4871,11 +4868,6 @@ However, no constraints linking to the endpoints were found. All - - - Normal - - Datums @@ -4891,34 +4883,192 @@ However, no constraints linking to the endpoints were found. Reference + + + Horizontal + + + Vertical + + + + + Coincident + + + + + Point on Object + + + + + Parallel + + + + + Perpendicular + + + + + Tangent + + + + + Equality + + + + + Symmetric + + + + + Block + + + + + Distance + + + + + Horizontal Distance + + + + + Vertical Distance + + + + + Radius + + + + + Weight + + + + + Diameter + + + + + Angle + + + + + Snell's Law + + + + + Internal Alignment + + + + + View + + + + + Shows all the constraints in the list + + + + + Show All + + + + + Hides all the constraints in the list + + + + + Hide All + + + + + Controls visualisation in the 3D view + + + + + Automation + + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + + Track filter selection + + + + + Controls widget list behaviour + + + + + List + + + + Internal alignments will be hidden - + Hide internal alignment - + Extended information will be added to the list - + + Geometric + + + + Extended information - + Constraints - - + + + + + Error @@ -5276,136 +5426,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch - + A dialog is already open in the task panel - + Do you want to close this dialog? - + Invalid sketch - + Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. - + Please remove the following constraint: - + Please remove at least one of the following constraints: - + Please remove the following redundant constraint: - + Please remove the following redundant constraints: - + The following constraint is partially redundant: - + The following constraints are partially redundant: - + Please remove the following malformed constraint: - + Please remove the following malformed constraints: - + Empty sketch - + Over-constrained sketch - + Sketch contains malformed constraints - + Sketch contains conflicting constraints - + Sketch contains redundant constraints - + Sketch contains partially redundant constraints - - - - + + + + (click to select) - + Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec - + Unsolved (%1 sec) diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index dc7bda3d59..30c4d5afcb 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -367,6 +367,106 @@ + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + + + + + Draw circle center lines + + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + + + + + Cosmetic thread bolt bottom view + + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + + + + + Cosmetic thread bolt side view + + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + + + + + Cosmetic thread hole bottom view + + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + + + + + Cosmetic thread hole side view + + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + + CmdTechDrawExtentGroup @@ -843,7 +943,7 @@ - + Save page to dxf @@ -1752,28 +1852,28 @@ - + PDF (*.pdf) - - + + All Files (*.*) - + Export Page As PDF - + SVG (*.svg) - + Export page as SVG @@ -1905,17 +2005,71 @@ Edit %1 + + + + TechDraw Circle Centerlines + + + + + + + + + Selection is empty + + + + + + + + + No object selected + + + + + + + TechDraw Thread Hole Side + + + + + + TechDraw Thread Bolt Side + + + + + + TechDraw Thread Hole Bottom + + + + + + TechDraw Tread Bolt Bottom + + + + + Please select two straight lines + + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1924,9 +2078,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies @@ -1938,19 +2092,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. @@ -3421,49 +3575,49 @@ Fast, but result is a collection of short straight lines. - + Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? - + Different paper size - + The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed - + Can not open file %1 for writing. - + Save Dxf File - + Dxf (*.dxf) - + Selected: diff --git a/src/Mod/Web/Gui/Resources/translations/Web.ts b/src/Mod/Web/Gui/Resources/translations/Web.ts index a1ad8e87a4..989e5fe4ef 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web.ts @@ -128,7 +128,7 @@ QObject - + Browser