diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 282efb981c..42357ae17d 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -3,1758 +3,1970 @@ App::Property - + The intervals between axes - + The angles of each axis - + The length of the axes - + The size of the axis bubbles - + The numbering style - + The type of this building - + The base object this component is built upon - + The object this component is cloning - + Other shapes that are appended to this object - + Other shapes that are subtracted from this object - + An optional description for this component - + An optional tag for this component - + Custom IFC properties and attributes - + A material for this object - + The role of this object - + Specifies if this object must move together when its host is moved - + The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane - + The perimeter length of the horizontal area - + The model description of this equipment - - The url of the product page of this equipment - - - - + Additional snap points for this equipment - + The electric power needed by this equipment in Watts - + The height of this object - + The computed floor area of this floor - + The placement of this object - + The profile used to build this frame - + Specifies if the profile must be aligned with the extrusion wires - + An offset vector between the base sketch and the frame - + Crossing point of the path on the profile. - + The rotation of the profile around its extrusion axis - + The length of this element, if not based on a profile - + The width of this element, if not based on a profile - + The thickness or extrusion depth of this element - + The number of sheets to use - + The offset between this panel and its baseline - + The length of waves for corrugated elements - + The height of waves for corrugated elements - + The direction of waves for corrugated elements - + The type of waves for corrugated elements - + The area of this panel - + The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object - + The line width of the rendered objects - + The color of the panel outline - + The size of the tag text - + The color of the tag text - + The X offset of the tag text - + The Y offset of the tag text - + The font of the tag text - + The text to display. Can be %tag%, %label% or %description% to display the panel tag or label - + The position of the tag text. Keep (0,0,0) for automatic center position - + The rotation of the tag text - + A margin inside the boundary - + Turns the display of the margin on/off - + The linked Panel cuts - + The tag text to display - + The width of the sheet - + The height of the sheet - + The fill ratio of this sheet - + The diameter of this pipe, if not based on a profile - + The length of this pipe, if not based on an edge - + An optional closed profile to base this pipe on - + Offset from the start point - + Offset from the end point - + The curvature radius of this connector - + The pipes linked by this connector - + The type of this connector - + The length of this element - + The width of this element - + The height of this element - + The structural nodes of this element - + The size of the chamfer of this element - + The dent length of this element - + The dent height of this element - + The dents of this element - + The chamfer length of this element - + The base length of this element - + The groove depth of this element - + The groove height of this element - + The spacing between the grooves of this element - + The number of grooves of this element - + The dent width of this element - + The type of this slab - + The size of the base of this element - + The number of holes in this element - + The major radius of the holes of this element - + The minor radius of the holes of this element - + The spacing between the holes of this element - + The length of the down floor of this element - + The number of risers in this element - + The riser height of this element - + The tread depth of this element - + Outside Diameter - + Wall thickness - + Width of the beam - + Height of the beam - + Thickness of the web - + Thickness of the flanges - + Thickness of the sides - + Thickness of the webs - + Thickness of the flange - + The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars - + The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. - + A list of angles for each roof pane - + A list of horizontal length projections for each roof pane - + A list of IDs of relative profiles for each roof pane - + A list of thicknesses for each roof pane - + A list of overhangs for each roof pane - + A list of calculated heights for each roof pane - + The face number of the base object used to build this roof - + The total length of ridges and hips of this roof - + The total length of borders of this roof - + The description column - + The values column - + The units column - + The objects column - + The filter column - + The spreadsheet to print the results to - - The objects that must be considered by this section plane. Empty means all document - - - - + If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane - + The display height of this section plane - + The size of the arrows of this section plane - + Show the cut in the 3D view - + The rendering mode to use - + If cut geometry is shown or not - + If cut geometry is filled or not - + The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site - - The street and housenumber of this site - - - - + The postal or zip code of this site - + The city of this site - + The country of this site - + The latitude of this site - + Angle between the true North and the North direction in this document - + The elevation of level 0 of this site - - An url that shows this site in a mapping website - - - - - The objects that are part of this site - - - - + The perimeter length of this terrain - + The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape - + Show solar diagram or not - + The scale of the solar diagram - + The position of the solar diagram - + The color of the solar diagram - + The objects that make the boundaries of this space object - + The computed floor area of this space - + The finishing of the floor of this space - + The finishing of the walls of this space - + The finishing of the ceiling of this space - + Objects that are included inside this space, such as furniture - + The type of this space - + The thickness of the floor finish - + A zone this space is part of - + The number of people who typically occupy this space - + The electric power needed to light this space in Watts - + The electric power needed by the equipment of this space in Watts - + If True, Equipment Power will be automatically filled by the equipment included in this space - + The type of air conditioning of this space - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font - + The color of the area text - + The size of the text font - + The size of the first line of text - + The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position - + The justification of the text - + The number of decimals to use for calculated texts - + Show the unit suffix - + The length of these stairs, if no baseline is defined - + The width of these stairs - + The total height of these stairs - + The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs - + The depth of the treads of these stairs - + The height of the risers of these stairs - + The size of the nosing - + The thickness of the treads - - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - - - - + The type of landings of these stairs - + The type of winders in these stairs - + The type of structure of these stairs - + The thickness of the massive structure or of the stringers - + The width of the stringers - + The offset between the border of the stairs and the structure - + An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line - + If the nodes are visible or not - + The width of the nodes line - + The size of the node points - + The color of the nodes line - + The type of structural node - + Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) - - the components of this window - - - - - The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - - - - an optional object that defines a volume to be subtracted from hosts of this window - - - - - The width of this window (for preset windows only) - - - - - The height of this window (for preset windows only) - - - - + The normal direction of this window - + The area of this window - - the width of louvre elements - - - - - the space between louvre elements - - - - + An optional higher-resolution mesh or shape for this object - + An optional additional placement to add to the profile before extruding it - + Opens the subcomponents that have a hinge defined - + A standard code (MasterFormat, OmniClass,...) - + A description for this material - - An URL where to find information about this material - - - - + The transparency value of this material - + The color of this material - + The list of layer names - + The list of layer materials - + The list of layer thicknesses - + The line color of the projected objects - + The color of the cut faces (if turned on) - + The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic - + The label of each axis - + If true, show the labels - + A transformation to apply to each label - + The axes this system is made of - + An optional axis or axis system on which this object should be duplicated - + The type of edges to consider - + If true, geometry is fused, otherwise a compound - + If True, the object is rendered as a face, if possible. - + The allowed angles this object can be rotated to when placed on sheets - + Specifies an angle for the wood grain (Clockwise, 0 is North) - + Specifies the scale applied to each panel view. - + A list of possible rotations for the nester - + Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars - + The structure object that hosts this rebar - + The custom spacing of rebar - + Shape of rebar - + Flip the roof direction if going the wrong way - + Shows plan opening symbols if available - + Show elevation opening symbols if available - + The objects that host this window + + + An optional custom bubble number + + + + + The type of line to draw this axis + + + + + Where to add bubbles to this axis: Start, end, both or none + + + + + The line width to draw this axis + + + + + The color of this axis + + + + + The number of the first axis + + + + + The font to use for texts + + + + + The font size + + + + + The placement of this axis system + + + + + The level of the (0,0,0) point of this level + + + + + The shape of this object + + + + + Stores IFC properties + + + + + The line width of this object + + + + + An optional unit to express levels + + + + + A transformation to apply to the level mark + + + + + If true, show the level + + + + + If true, show the unit on the level tag + + + + + If true, when activated, the working plane will automatically adapt to this level + + + + + If true, when activated, Display offset will affect the origin mark too + + + + + If true, when activated, the object's label is displayed + + + + + The font to be used for texts + + + + + The font size of texts + + + + + Camera position data associated with this object + + + + + If set, the view stored in this object will be restored on double-click + + + + + The individual face colors + + + + + If set to True, the working plane will be kept on Auto mode + + + + + An optional standard (OmniClass, etc...) code for this component + + + + + The URL of the product page of this equipment + + + + + A URL where to find information about this material + + + + + The horizontal offset of waves for corrugated elements + + + + + If the wave also affects the bottom side or not + + + + + The position of the tag text. Keep (0,0,0) for center position + + + + + The font file + + + + + An offset value to move the cut plane from the center point + + + + + Length of a single rebar + + + + + Total length of all rebars + + + + + The base file this component is built upon + + + + + The part to use from the base file + + + + + If True, the shape will be discarded when turning visibility off, resulting in a lighter file, but with an additional loading time when turning the object back on + + + + + The latest time stamp of the linked file + + + + + If true, the colors from the linked file will be kept updated + + + + + The objects that must be considered by this section plane. Empty means the whole document. + + + + + The transparency of this object + + + + + The color of this object + + + + + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) + + + + + The street and house number of this site, with postal box or apartment number if needed + + + + + The region, province or county of this site + + + + + A url that shows this site in a mapping website + + + + + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates + + + + + Specifies if this space is internal or external + + + + + The width of a Landing (Second edge and after - First edge follows Width property) + + + + + The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in + + + + + The depth of the landing of these stairs + + + + + The depth of the treads of these stairs - Enforced regardless of Length or edge's Length + + + + + The height of the risers of these stairs - Enforced regardless of Height or edge's Height + + + + + The direction of flight after landing + + + + + The 'absolute' top level of a flight of stairs leads to + + + + + The 'left outline' of stairs + + + + + The 'left outline' of all segments of stairs + + + + + Enable this to make the wall generate blocks + + + + + The length of each block + + + + + The height of each block + + + + + The horizontal offset of the first line of blocks + + + + + The horizontal offset of the second line of blocks + + + + + The size of the joints between each block + + + + + The number of entire blocks + + + + + The number of broken blocks + + + + + The components of this window + + + + + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. + + + + + An optional object that defines a volume to be subtracted from hosts of this window + + + + + The width of this window + + + + + The height of this window + + + + + The preset number this window is based on + + + + + The frame size of this window + + + + + The offset size of this window + + + + + The width of louvre elements + + + + + The space between louvre elements + + + + + The number of the wire that defines the hole. If 0, the value will be calculated automatically + + Arch - + Components - + Components of this object - + Axes - + Create Axis - + Remove - + Add - + Axis - + Distance - + Angle - + is not closed - + is not valid - + doesn't contain any solid - + contains a non-closed solid - + contains faces that are not part of any solid - + Grouping - + Ungrouping - + Split Mesh - + Mesh to Shape - - All good! no problems found - - - - + Base component - + Additions - + Subtractions - + Objects - - closing Sketch edit - - - - + Roof - + Create Roof - + Unable to create a roof - + Page - + View of - + Create Section Plane - + Create Site - + Create Structure - + Create Wall - - WallTrace - - - - + Width - + Height - + Error: Invalid base object - + This mesh is an invalid solid - + Create Window - + Edit - + Create/update component - + Base 2D object - + Wires - + Create new component - + Name - + Type - + Thickness - - - Z offset - - Error: Couldn't determine character encoding - + file %s successfully created. - - Error: Couldn't determine character encoding - - - - - - Couldn't locate IfcOpenShell - - - - - - IFC Schema not found, IFC import disabled. - - - - - - successfully written - - - - + Add space boundary - + Remove space boundary - + Please select a base object - + Fixtures - + Frame - + Create Frame - + Create Rebar - - Please select a base face on a structural object - - - - - - Please select a base object - - - - - + Create Space - + Create Stairs - + Length - + Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape - + Merge Wall - - The selected wall contain no subwall to merge - - - - + Please select only wall objects - + Merge Walls - - Pick a face on an existing object or select a preset - - - - - - Unable to create component - - - - - - pycollada not found, collada support is disabled. - - - - - - IfcOpenShell not found or disabled, falling back on internal parser. - - - - - + Distances (mm) and angles (deg) between axes - + Error computing the shape of this object - + Create Structural System - - Error: IfcOpenShell is not installed - - - - - - Error: your IfcOpenShell version is too old - - - - - - Found a shape containing curves, triangulating - - - - - - Invalid cutplane - - - - - + Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object - + Enabling Brep force flag of object - + has no solid - + has an invalid shape - + has a null shape @@ -1764,47 +1976,47 @@ - + Create Equipment - + You must select exactly one base object - + The selected object must be a mesh - + This mesh has more than 1000 facets. - + This operation can take a long time. Proceed? - + The mesh has more than 500 facets. This will take a couple of minutes... - + Create 3 views - + Create Panel - + Parameters of the profiles of the roof: * Angle : slope in degrees compared to the horizontal one. * Run : outdistance between the wall and the ridge sheathing. @@ -1819,12 +2031,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Id - + IdRel @@ -1864,782 +2076,968 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - - Crossing point not found in profile. - - - - - + Angle (deg) - + Run (mm) - + Thickness (mm) - + Overhang (mm) - + Height (mm) - + Create Component - + Create material - + Walls can only be based on Part or Mesh objects - - Objects seen by this section plane - - - - + Set text position - + Category - + Key - + Value - + Unit - - The object have not IfcProperties attribute. Cancel spreadsheet creation for object : - - - - + Create IFC properties spreadsheet - - You can put anything but Site and Building object in a Building object. -Building object are not allowed to accept Site and Building object. -Site and Building objects will be removed from the selection. -You can change that in the preferences. - - - - - - There is no valid object in the selection. -Building creation aborted. - - - - - + Create Building - + Group - - You can put anything but Site, Building, Floor object in a Floor object. -Floor object are not allowed to accept Site or Building object. -Site, Building and Floor objects will be removed from the selection. -You can change that in the preferences. - - - - - - There is no valid object in the selection. -Floor creation aborted. - - - - - + Create Floor - + Create Panel Cut - + Create Panel Sheet - + Facemaker returned an error - + Tools - + Edit views positions - + Create Pipe - - Please select exactly 2 or 3 Pipe objects - - - - - - Please select only Pipe objects - - - - - + Create Connector - - Unable to build the base path - - - - - - Unable to build the profile - - - - - - Unable to build the pipe - - - - - - The base object is not a Part - - - - - - Too many wires in the base shape - - - - - - The base wire is closed - - - - - - The profile is not a 2D Part - - - - - - Too many wires in the profile - - - - - - The profile is not closed - - - - - - Only the 3 first wires will be connected - - - - - - Common vertex not found - - - - - - Pipes are already aligned - - - - - - At least 2 pipes must aligned - - - - - + Precast elements - + Slab type - + Chamfer - + Dent length - + Dent width - + Dent height - + Slab base - + Number of holes - + Major diameter of holes - + Minor diameter of holes - + Spacing between holes - + Number of grooves - + Depth of grooves - + Height of grooves - + Spacing between grooves - + Number of risers - + Length of down floor - + Height of risers - + Depth of treads - + Precast options - + Dents list - + Add dent - + Remove dent - + Slant - + Level - + Rotation - + Offset - - No spreadsheet attached to this schedule - - - - - + Unable to retrieve value from object - + Import CSV File - + Export CSV File - + Schedule - - Please select only Building objects or nothing! -Site are not allowed to accept other object than Building. -Other objects will be removed from the selection. -You can change that in the preferences. - - - - + There is no valid object in the selection. Site creation aborted. - + Node Tools - + Reset nodes - + Edit nodes - + Extend nodes - + Extends the nodes of this element to reach the nodes of another element - + Connect nodes - + Connects nodes of this element with the nodes of another element - + Toggle all nodes - + Toggles all structural nodes of the document on/off - - Pick another Structure object: - - - - - The picked object is not a Structure - - - - - - The picked object has no structural nodes - - - - - - One of these objects has more than 2 nodes - - - - - - Unable to find a suitable intersection point - - - - - + Intersection found. - + Door - + Hinge - + Opening mode - + Get selected edge - + Press to retrieve the selected edge - - - This exporter can currently only export one site object - - - - - - Error: Space '%s' has no Zone. Aborting. - - - Which side to cut - + You must select a base shape object and optionally a mesh object - - successfully imported - - - - + Create multi-material - + Material - + New layer - + Wall Presets... - + Hole wire - - The number of the wire that defines a hole in the host object. A value of zero will adopt automatically the biggest wire - - - - + Pick selected - - Only axes must be selected - - - - - + Create Axis System - - Please select at least one axis - - - - - + Create Grid - + Label - + Axis system components - - Auto height is bigger than height - - - - - Total row size is bigger than height - - - - - Auto width is bigger than width - - - - - Total column size is bigger than width - - - - + Grid - + Total width - + Total height - + Add row - + Del row - + Add col - + Del col - + Create span - + Remove span - + Rows - + Columns - + This object has no face - + Space boundaries - + Error: Unable to modify the base object of this wall - + Window elements - + Survey - + Set description - + Clear - + Copy Length - + Copy Area - + Export CSV - + Description - + Area - + Total - + Hosts + + + Only axes must be selected + + + + + Please select at least one axis + + + + + Auto height is larger than height + + + + + Total row size is larger than height + + + + + Auto width is larger than width + + + + + Total column size is larger than width + + + + + You can put anything but Site and Building object in a Building object. +Building object is not allowed to accept Site and Building object. +Site and Building objects will be removed from the selection. +You can change that in the preferences. + + + + + There is no valid object in the selection. +Building creation aborted. + + + + + BuildingPart + + + + + Create BuildingPart + + + + + Invalid cutplane + + + + + All good! No problems found + + + + + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: + + + + + Toggle subcomponents + + + + + Closing Sketch edit + + + + + Component + + + + + Edit IFC properties + + + + + Edit standard code + + + + + Property + + + + + Add property... + + + + + Add property set... + + + + + New... + + + + + New property + + + + + New property set + + + + + You can put anything but the following objects: Site, Building, and Floor - in a Floor object. +Floor object is not allowed to accept Site or Building objects. +Site, Building, and Floor objects will be removed from the selection. +You can change that in the preferences. + + + + + There is no valid object in the selection. +Floor creation aborted. + + + + + Crossing point not found in profile. + + + + + Error computing shape of + + + + + Please select exactly 2 or 3 Pipe objects + + + + + Please select only Pipe objects + + + + + Unable to build the base path + + + + + Unable to build the profile + + + + + Unable to build the pipe + + + + + The base object is not a Part + + + + + Too many wires in the base shape + + + + + The base wire is closed + + + + + The profile is not a 2D Part + + + + + Too many wires in the profile + + + + + The profile is not closed + + + + + Only the 3 first wires will be connected + + + + + Common vertex not found + + + + + Pipes are already aligned + + + + + At least 2 pipes must align + + + + + Profile + + + + + Please select a base face on a structural object + + + + + Create external reference + + + + + No spreadsheet attached to this schedule + + + + + Section plane settings + + + + + Objects seen by this section plane: + + + + + Section plane placement: + + + + + Rotate X + + + + + Rotate Y + + + + + Rotate Z + + + + + Resize + + + + + Center + + + + + Please either select only Building objects or nothing at all! +Site is not allowed to accept any other object besides Building. +Other objects will be removed from the selection. +Note: You can change that in the preferences. + + + + + Choose another Structure object: + + + + + The chosen object is not a Structure + + + + + The chosen object has no structural nodes + + + + + One of these objects has more than 2 nodes + + + + + Unable to find a suitable intersection point + + + + + Intersection found. + + + + + The selected wall contains no subwall to merge + + + + + Error computing block cuts for wall + + + + + Cannot compute blocks for wall + + + + + Choose a face on an existing object or select a preset + + + + + Unable to create component + + + + + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire + + + + + + default + + + + + If this is checked, the default Frame value of this window will be added to the value entered here + + + + + If this is checked, the default Offset value of this window will be added to the value entered here + + + + + pycollada not found, collada support is disabled. + + + + + This exporter can currently only export one site object + + + + + Error: Space '%s' has no Zone. Aborting. + + + + + Couldn't locate IfcOpenShell + + + + + IfcOpenShell not found or disabled, falling back on internal parser. + + + + + IFC Schema not found, IFC import disabled. + + + + + Error: IfcOpenShell is not installed + + + + + Error: your IfcOpenShell version is too old + + + + + Successfully written + + + + + Found a shape containing curves, triangulating + + + + + Successfully imported + + ArchMaterial @@ -2649,105 +3047,110 @@ Site creation aborted. - + Choose preset... - + Name - + Description - + Color - + URL - + Copy existing... - + Choose a preset card - + Copy values from an existing material in the document - + The name/label of this material - + An optional description for this material - + The color of this material - + Transparency - + A transparency value for this material - + Standard code - + A standard (MasterFormat, Omniclass...) code for this material - - Opens the OmniClass website to pick a category - - - - + Opens the URL in a browser - + A URL describing this material + + + Opens a browser dialog to choose a class from a BIM standard + + + + + Father + + Arch_3Views - + 3 views from mesh - + Creates 3 views (top, front, side) from a mesh-based object @@ -2755,12 +3158,12 @@ Site creation aborted. Arch_Add - + Add component - + Adds the selected components to the active object @@ -2768,43 +3171,43 @@ Site creation aborted. Arch_Axis - + Axis - - Creates a set of axes. - - - - + Grid - + Creates a customizable grid object + + + Creates a set of axes + + Arch_AxisSystem - + Axis System - - Creates an axis system from a set of axes. + + Creates an axis system from a set of axes Arch_AxisTools - + Axis tools @@ -2812,43 +3215,56 @@ Site creation aborted. Arch_Building - + Building - + Creates a building object including selected objects. + + Arch_BuildingPart + + + BuildingPart + + + + + Creates a BuildingPart object including selected objects + + + Arch_Check - + Check - + Checks the selected objects for problems - - Explore the contents of an Ifc file + + Explore the contents of an IFC file Arch_CloneComponent - + Clone component - + Clones an object as an undefined architectural component @@ -2856,12 +3272,12 @@ Site creation aborted. Arch_CloseHoles - + Close holes - + Closes holes in open shapes, turning them solids @@ -2869,12 +3285,12 @@ Site creation aborted. Arch_Component - + Component - + Creates an undefined architectural component @@ -2895,12 +3311,12 @@ Site creation aborted. Arch_Equipment - + Equipment - + Creates an equipment object from a selected object (Part or Mesh) @@ -2908,12 +3324,12 @@ Site creation aborted. Arch_Floor - + Floor - + Creates a floor object including selected objects @@ -2921,12 +3337,12 @@ Site creation aborted. Arch_Frame - + Frame - + Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. @@ -2934,62 +3350,62 @@ Site creation aborted. Arch_Grid - + The number of rows - + The number of columns - + The sizes for rows - + The sizes of columns - + The span ranges of cells that are merged together - + The type of 3D points produced by this grid object - + The total width of this grid - + The total height of this grid - + Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide @@ -2997,7 +3413,7 @@ Site creation aborted. Arch_IfcExplorer - + Ifc Explorer @@ -3005,25 +3421,25 @@ Site creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... - - Creates a spreadsheet to store ifc properties of an object. + + Creates a spreadsheet to store IFC properties of an object. Arch_Material - + Creates or edits the material definition of a selected object. - + Material @@ -3031,7 +3447,7 @@ Site creation aborted. Arch_MaterialTools - + Material tools @@ -3039,12 +3455,12 @@ Site creation aborted. Arch_MergeWalls - + Merge Walls - + Merges the selected walls, if possible @@ -3052,12 +3468,12 @@ Site creation aborted. Arch_MeshToShape - + Mesh to Shape - + Turns selected meshes into Part Shape objects @@ -3065,12 +3481,12 @@ Site creation aborted. Arch_MultiMaterial - + Multi-Material - + Creates or edits multi-materials @@ -3078,12 +3494,12 @@ Site creation aborted. Arch_Nest - + Nest - + Nests a series of selected shapes in a container @@ -3091,12 +3507,12 @@ Site creation aborted. Arch_Panel - + Panel - + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) @@ -3104,7 +3520,7 @@ Site creation aborted. Arch_PanelTools - + Panel tools @@ -3112,7 +3528,7 @@ Site creation aborted. Arch_Panel_Cut - + Panel Cut @@ -3120,17 +3536,17 @@ Site creation aborted. Arch_Panel_Sheet - + Creates 2D views of selected panels - + Panel Sheet - + Creates a 2D sheet which can contain panel cuts @@ -3138,17 +3554,17 @@ Site creation aborted. Arch_Pipe - + Pipe - + Creates a pipe object from a given Wire or Line - + Creates a connector between 2 or 3 selected pipes @@ -3156,7 +3572,7 @@ Site creation aborted. Arch_PipeConnector - + Connector @@ -3164,7 +3580,7 @@ Site creation aborted. Arch_PipeTools - + Pipe tools @@ -3172,25 +3588,38 @@ Site creation aborted. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar + + Arch_Reference + + + External reference + + + + + Creates an external reference object + + + Arch_Remove - + Remove component - + Remove the selected components from their parents, or create a hole in a component @@ -3198,12 +3627,12 @@ Site creation aborted. Arch_RemoveShape - + Remove Shape from Arch - + Removes cubic shapes from Arch components @@ -3211,12 +3640,12 @@ Site creation aborted. Arch_Roof - + Roof - + Creates a roof object from the selected wire. @@ -3224,12 +3653,12 @@ Site creation aborted. Arch_Schedule - + Schedule - + Creates a schedule to collect data from the model @@ -3237,12 +3666,12 @@ Site creation aborted. Arch_SectionPlane - + Section Plane - + Creates a section plane object, including the selected objects @@ -3250,12 +3679,12 @@ Site creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups @@ -3263,12 +3692,12 @@ Site creation aborted. Arch_Site - + Site - + Creates a site object including selected objects. @@ -3276,17 +3705,17 @@ Site creation aborted. Arch_Space - + Space - + Creates a space object from selected boundary objects - + Creates a stairs object @@ -3294,12 +3723,12 @@ Site creation aborted. Arch_SplitMesh - + Split Mesh - + Splits selected meshes into independent components @@ -3307,7 +3736,7 @@ Site creation aborted. Arch_Stairs - + Stairs @@ -3315,12 +3744,12 @@ Site creation aborted. Arch_Structure - + Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -3328,12 +3757,12 @@ Site creation aborted. Arch_Survey - + Survey - + Starts survey @@ -3341,12 +3770,12 @@ Site creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag - + Force an object to be exported as Brep or not @@ -3354,12 +3783,12 @@ Site creation aborted. Arch_ToggleSubs - + Toggle subcomponents - + Shows or hides the subcomponents of this object @@ -3367,12 +3796,12 @@ Site creation aborted. Arch_Wall - + Wall - + Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -3380,12 +3809,12 @@ Site creation aborted. Arch_Window - + Window - + Creates a window object from a selected object (wire, rectangle or sketch) @@ -3576,12 +4005,7 @@ Site creation aborted. - - This exports the contents of the "Result" spreadsheet to a csv file. In Libreoffice, you can keep this csv file linked by right-clicking the sheets tab bar -> New sheet -> From file -> Link - - - - + Export @@ -3590,11 +4014,6 @@ Site creation aborted. BimServer Login - - - Bim server URL: - - Login (email): @@ -3606,13 +4025,67 @@ Site creation aborted. - - Keep me logged across FreeCAD sessions + + Dialog - - Dialog + + This exports the contents of the "Result" spreadsheet to a CSV file. In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -> New sheet -> From file -> Link + Note: as of LibreOffice v5.4.5.1 the correct path now is: Sheets tab bar -> Insert Sheet... -> From file -> Browse... + + + + + BimServer URL: + + + + + Keep me logged in across FreeCAD sessions + + + + + IFC properties editor + + + + + IFC UUID: + + + + + Leave this empty to generate one at export + + + + + List of IFC properties for this object. Double-click to edit, drag and drop to reorganize + + + + + Delete selected property/set + + + + + Force exporting geometry as BREP + + + + + Force export full FreeCAD parametric data + + + + + Draft + + + Writing camera position @@ -3827,187 +4300,182 @@ Site creation aborted. - + This is the default color for new Wall objects - + This is the default color for new Structure objects - + 2D rendering - + Show debug information during 2D rendering - + Show renderer debug messages - + Cut areas line thickness ratio - + Specifies how many times the viewed line thickness must be applied to cut lines - + Width: - + Height: - + Color: - + Length: - + Diameter - + Offset - + The default width for new windows - + The default height for new windows - + Thickness: - + The default thickness for new windows - + Frame color: - + Glass color: - + Auto-join walls - + If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one - + Join walls base sketches when possible - + Mesh to Shape Conversion - + If this is checked, conversion is faster but the result might still contain triangulated faces - + Fast conversion - + Tolerance: - + If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results - + Force flat faces - + If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - + Cut method - + Show debug messages - + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings - + If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number - - Exclude list: - - - - + A comma-separated list of Ifc entities to exclude from import @@ -4027,92 +4495,92 @@ Site creation aborted. - + mm - + Structures - + Rebars - + Windows - + Transparency: - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - + 30, 10 - + Stairs - + Number of steps: - + Panels - + mm - + Thickness - + Force export as Brep - + Bim server - + Address - + The URL of a bim server instance (www.bimserver.org) to connect to. - + http://localhost:8082 @@ -4122,7 +4590,7 @@ Site creation aborted. - + Export options @@ -4137,92 +4605,92 @@ Site creation aborted. - + Show verbose information during import and export of IFC files - + Import options - + Import arch IFC objects as - + Specifies what kind of objects will be created in FreeCAD - + Parametric Arch objects - + Non-parametric Arch objects - + Simple Part shapes - + One compound per floor - + Do not import Arch objects - + Import struct IFC objects as - + One compound for all - + Do not import structural objects - + Root element: - + Only subtypes of this element will be imported. Keep value as "IfcProduct" to import all building elements. - + If this is checked, the importer will try to detect extrusions. This might slow things down... - + Detect extrusions - + If several materials with the same name are found in the IFC file, they will be treated as one. - + Merge materials with same name @@ -4332,22 +4800,22 @@ Site creation aborted. - + Use triangulation options set in the DAE options page - + Use DAE triangulation options - + Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, some additional calculation is done to join coplanar facets. - + Join coplanar facets when triangulating @@ -4357,17 +4825,17 @@ Site creation aborted. - + Two possible strategies to avoid circular dependencies: Create one more object (unchecked) or remove external geometry of base sketch (checked) - + Remove external geometry of base sketches when needed - + Create clones when objects have shared geometry @@ -4377,138 +4845,203 @@ Site creation aborted. - + If checked each object will have their Ifc Properties stored in a spreadsheet object. - + Import Ifc Properties in spreadsheet - + When exporting objects without UID, the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported, which gives smaller diffs between versions - + Store IFC universal ID in FreeCAD objects - + If this is checked, when an object becomes Subtraction or Addition of an Arch object, it will receive the Draft Construction color. - + Apply Draft construction style to subcomponents - + Symbol line thickness ratio - + Pattern scale - + Scaling factor for patterns used by object that have a Footprint display mode - + Open in external browser - + Survey - + If this is checked, the text that gets placed in the clipboard will include the unit. Otherwise, it will be a simple number expressed in internal units (millimeters) - + Include unit when sending measurements to clipboard - + Pipes - + Diameter: - + Split walls made of multiple layers - + Split multilayer walls - + Warning, experimental feature! - + Use IfcOpenShell serializer if available - + Export 2D objects as IfcAnnotations - + Hidden geometry pattern - + Tolerance value to use when checking if 2 adjacent faces as planar - + Fit view during import on the imported objects. This will slow down the import, but one can watch the import. - + Fit view while importing - + If this is checked, all FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - + Export full FreeCAD parametric model - - If this is checked, the "open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench + + Do not compute areas for object with more than: + + + + + faces + + + + + Interval between file checks for references + + + + + seconds + + + + + By default, new objects will have their "Move with host" property set to False, which means they won't move when their host object is moved. + + + + + Set "Move with host" property to True by default + + + + + If this is checked, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench + + + + + Use sketches + + + + + Helpers (grids, axes, etc...) + + + + + Exclude list: + + + + + If this is checked, when possible, similar entities will be used only once in the file. This can reduce the file size a lot, but will make it less easily readable by humans + + + + + Reuse similar entities + + + + + When possible, IFC objects that are extruded rectangles are exported as IfcRectangleProfileDef. However, some other applications notoriously have problems importing that entity. If this is your case, you can disable this here (all profiles will be exported as IfcArbitraryClosedProfileDef). + + + + + Disable IfcRectangleProfileDef diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index d4d41b1f5e..bac6b7c8e1 100755 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -3,678 +3,723 @@ App::Property - + Defines a hatch pattern - + Sets the size of the pattern - + Startpoint of dimension - + Endpoint of dimension - - the normal direction of this dimension - - - - + Point through which the dimension line passes - + The object measured by this dimension - + The geometry this dimension is linked to - + The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter - + Font size - + The number of decimals to show - + Arrow size - + The spacing between the text and the dimension line - + Arrow type - + Font name - + Line width - + Line color - + Length of the extension lines - + Rotate the dimension arrows 180 degrees - + Rotate the dimension text 180 degrees - + Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default - + Start angle of the dimension - + End angle of the dimension - + The center point of this dimension - + The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length - + Length of the rectangle - + Radius to use to fillet the corners - + Size of the chamfer to give to the corners - + Create a face - + Defines a texture image (overrides hatch patterns) - + Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle - + The minor radius of the ellipse - + The major radius of the ellipse - + The vertices of the wire - + If the wire is closed or not - + The start point of this line - + The end point of this line - + The length of this line - + Create a face if this object is closed - + The number of subdivisions of each edge - + Displays a dim symbol at the end of the wire - + Number of faces - + Radius of the control circle - + How the polygon must be drawn from the control circle - + Projection direction - + The width of the lines inside this object - + The size of the texts inside this object - + The spacing between lines of text - + The color of the projected objects - + The linked object - + Shape Fill Style - + Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model - - The points of the b-spline - - - - - If the b-spline is closed or not - - - - + Create a face if this spline is closed - + Parameterization factor - + The points of the Bezier curve - + The degree of the Bezier function - + Continuity - + If the Bezier curve should be closed or not - + Create a face if this curve is closed - + The components of this block - + The base object this 2D view must represent - + The projection vector of this object - + The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode - + Show hidden lines - Tessellate Ellipses and BSplines into line segments - - - - - Length of line segments if tessellating Ellipses or BSplines into line segments - - - - The base object that must be duplicated - + The type of array to create - + The axis direction - + Number of copies in X direction - + Number of copies in Y direction - + Number of copies in Z direction - + Number of copies - + Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction - + Center point - + Angle to cover with copies - + Specifies if copies must be fused (slower) - + The path object along which to distribute objects - + Selected subobjects (edges) of PathObj - + Optional translation vector - + Orientation of Base along path - + X Location - + Y Location - + Z Location - - The objects included in this scale object - - - - - The scale vector of this object - - - - + Text string - + Font file name - + Height of text - + Inter-character spacing - + Linked faces - + Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces - + Height of the rectangle - + Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle - + The placement of this object - + The display length of this section plane - + The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects - + The length of the straight segment - + The point indicated by this label - + The points defining the label polyline - + The direction of the straight segment - + The type of information shown by this label - + The target object of this label - + The text to display when type is set to custom - + The text displayed by this label - + The size of the text - + The font of the text - + The size of the arrow - + The vertical alignment of the text - + The type of arrow of this label - + The type of frame around the text of this object - + Text color - + The maximum number of characters on each line of the text box + + + The distance the dimension line is extended past the extension lines + + + + + Length of the extension line above the dimension line + + + + + The points of the B-spline + + + + + If the B-spline is closed or not + + + + + Tessellate Ellipses and B-splines into line segments + + + + + Length of line segments if tessellating Ellipses or B-splines into line segments + + + + + If this is True, this object will be recomputed only if it is visible + + + + + Base + + + + + PointList + + + + + Count + + + + + The objects included in this clone + + + + + The scale factor of this clone + + + + + If this clones several objects, this specifies if the result is a fusion or a compound + + + + + This specifies if the shapes sew + + + + + Display a leader line or not + + + + + The text displayed by this object + + + + + Line spacing (relative to font size) + + Draft - + Slope - - - Slope to give toselected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down - - Download of dxf libraries failed. @@ -684,62 +729,62 @@ http://www.freecadweb.org/wiki/Dxf_Importer_Install - + Scale - + Writing camera position - + Writing objects shown/hidden state - + X factor - + Y factor - + Z factor - + Uniform scaling - + Working plane orientation - + Result - + Create a clone - + Modify original - + Create a copy @@ -750,29 +795,105 @@ Please install the dxf Library addon manually from menu Tools -> Addon Manager + + + This Wire is already flat + + + + + Pick from/to points + + + + + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down + + + + + DraftShapeStringGui + + + ShapeString + + + + + Text to be made into ShapeString + + + + + String + + + + + Height + + + + + Height of the result + + + + + X + + + + + Y + + + + + Z + + + + + Font file + + + + + Draft_AddConstruction + + + Add to Construction group + + + + + Adds the selected objects to the Construction group + + Draft_AddPoint - + Add Point - - Adds a point to an existing wire/bspline + + Adds a point to an existing Wire or B-spline Draft_AddToGroup - + Move to group... - + Moves the selected object(s) to an existing group @@ -780,12 +901,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style - + Applies current line width and color to selected objects @@ -793,12 +914,12 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc - + Creates an arc. CTRL to snap, SHIFT to constrain @@ -806,12 +927,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array - + Creates a polar or rectangular array from a selected object @@ -819,12 +940,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup - + Select a group to automatically add all Draft & Arch objects to @@ -832,25 +953,25 @@ from menu Tools -> Addon Manager Draft_BSpline - - B-Spline + + B-spline - - Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain + + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain Draft_BezCurve - + BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain @@ -858,12 +979,12 @@ from menu Tools -> Addon Manager Draft_Circle - + Circle - + Creates a circle. CTRL to snap, ALT to select tangent objects @@ -871,12 +992,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone - + Clones the selected object(s) @@ -884,12 +1005,12 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line - + Closes the line being drawn @@ -897,25 +1018,25 @@ from menu Tools -> Addon Manager Draft_DelPoint - + Remove Point - - Removes a point from an existing wire or bspline + + Removes a point from an existing Wire or B-spline Draft_Dimension - + Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment @@ -923,12 +1044,12 @@ from menu Tools -> Addon Manager Draft_Downgrade - + Downgrade - + Explodes the selected objects into simpler objects, or subtracts faces @@ -936,12 +1057,12 @@ from menu Tools -> Addon Manager Draft_Draft2Sketch - + Draft to Sketch - + Convert bidirectionally between Draft and Sketch objects @@ -949,25 +1070,25 @@ from menu Tools -> Addon Manager Draft_Drawing - + Drawing - - Puts the selected objects on a Drawing sheet. + + Puts the selected objects on a Drawing sheet Draft_Edit - + Edit - + Edits the active object @@ -975,12 +1096,12 @@ from menu Tools -> Addon Manager Draft_Ellipse - + Ellipse - + Creates an ellipse. CTRL to snap @@ -988,12 +1109,12 @@ from menu Tools -> Addon Manager Draft_Facebinder - + Facebinder - + Creates a facebinder object from selected face(s) @@ -1001,12 +1122,12 @@ from menu Tools -> Addon Manager Draft_FinishLine - + Finish line - + Finishes a line without closing it @@ -1014,12 +1135,12 @@ from menu Tools -> Addon Manager Draft_FlipDimension - + Flip Dimension - + Flip the normal direction of a dimension @@ -1027,25 +1148,38 @@ from menu Tools -> Addon Manager Draft_Heal - + Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version + + Draft_Join + + + Join + + + + + Joins two wires together + + + Draft_Label - + Label - + Creates a label, optionally attached to a selected object or element @@ -1053,12 +1187,12 @@ from menu Tools -> Addon Manager Draft_Line - + Line - + Creates a 2-point line. CTRL to snap, SHIFT to constrain @@ -1066,12 +1200,12 @@ from menu Tools -> Addon Manager Draft_Mirror - + Mirror - + Mirrors the selected objects along a line defined by two points @@ -1079,12 +1213,12 @@ from menu Tools -> Addon Manager Draft_Move - + Move - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1092,12 +1226,12 @@ from menu Tools -> Addon Manager Draft_Offset - + Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1105,12 +1239,12 @@ from menu Tools -> Addon Manager Draft_PathArray - + PathArray - + Creates copies of a selected object along a selected path. @@ -1118,25 +1252,38 @@ from menu Tools -> Addon Manager Draft_Point - + Point - + Creates a point object + + Draft_PointArray + + + PointArray + + + + + Creates copies of a selected object on the position of points. + + + Draft_Polygon - + Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain @@ -1144,12 +1291,12 @@ from menu Tools -> Addon Manager Draft_Rectangle - + Rectangle - + Creates a 2-point rectangle. CTRL to snap @@ -1157,12 +1304,12 @@ from menu Tools -> Addon Manager Draft_Rotate - + Rotate - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy @@ -1170,12 +1317,12 @@ from menu Tools -> Addon Manager Draft_Scale - + Scale - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1183,12 +1330,12 @@ from menu Tools -> Addon Manager Draft_SelectGroup - + Select group - + Selects all objects with the same parents as this group @@ -1196,12 +1343,12 @@ from menu Tools -> Addon Manager Draft_SelectPlane - + SelectPlane - + Select a working plane for geometry creation @@ -1209,25 +1356,25 @@ from menu Tools -> Addon Manager Draft_SetWorkingPlaneProxy - - Create WP Proxy + + Creates a proxy object from the current working plane - - Creates a proxy object from the current working plane + + Create Working Plane Proxy Draft_Shape2DView - + Shape 2D view - + Creates Shape 2D views of selected objects @@ -1235,12 +1382,12 @@ from menu Tools -> Addon Manager Draft_ShapeString - + Shape from text... - + Creates text string in shapes. @@ -1248,12 +1395,12 @@ from menu Tools -> Addon Manager Draft_ShowSnapBar - + Show Snap Bar - + Shows Draft snap toolbar @@ -1261,25 +1408,25 @@ from menu Tools -> Addon Manager Draft_Slope - - Set slope + + Set Slope - - Sets the slope of a selected line or wire + + Sets the slope of a selected Line or Wire Draft_Snap_Angle - + Angles - + Snaps to 45 and 90 degrees points on arcs and circles @@ -1287,12 +1434,12 @@ from menu Tools -> Addon Manager Draft_Snap_Center - + Center - + Snaps to center of circles and arcs @@ -1300,12 +1447,12 @@ from menu Tools -> Addon Manager Draft_Snap_Dimensions - + Dimensions - + Shows temporary dimensions when snapping to Arch objects @@ -1313,12 +1460,12 @@ from menu Tools -> Addon Manager Draft_Snap_Endpoint - + Endpoint - + Snaps to endpoints of edges @@ -1326,12 +1473,12 @@ from menu Tools -> Addon Manager Draft_Snap_Extension - + Extension - + Snaps to extension of edges @@ -1339,12 +1486,12 @@ from menu Tools -> Addon Manager Draft_Snap_Grid - + Grid - + Snaps to grid points @@ -1352,12 +1499,12 @@ from menu Tools -> Addon Manager Draft_Snap_Intersection - + Intersection - + Snaps to edges intersections @@ -1365,17 +1512,17 @@ from menu Tools -> Addon Manager Draft_Snap_Lock - + Toggle On/Off - + Activates/deactivates all snap tools at once - + Lock @@ -1383,12 +1530,12 @@ from menu Tools -> Addon Manager Draft_Snap_Midpoint - + Midpoint - + Snaps to midpoints of edges @@ -1396,12 +1543,12 @@ from menu Tools -> Addon Manager Draft_Snap_Near - + Nearest - + Snaps to nearest point on edges @@ -1409,12 +1556,12 @@ from menu Tools -> Addon Manager Draft_Snap_Ortho - + Ortho - + Snaps to orthogonal and 45 degrees directions @@ -1422,12 +1569,12 @@ from menu Tools -> Addon Manager Draft_Snap_Parallel - + Parallel - + Snaps to parallel directions of edges @@ -1435,12 +1582,12 @@ from menu Tools -> Addon Manager Draft_Snap_Perpendicular - + Perpendicular - + Snaps to perpendicular points on edges @@ -1448,12 +1595,12 @@ from menu Tools -> Addon Manager Draft_Snap_Special - + Special - + Snaps to special locations of objects @@ -1461,25 +1608,38 @@ from menu Tools -> Addon Manager Draft_Snap_WorkingPlane - + Working Plane - + Restricts the snapped point to the current working plane + + Draft_Split + + + Split + + + + + Splits a wire into two wires + + + Draft_Stretch - + Stretch - + Stretches the selected objects @@ -1487,12 +1647,12 @@ from menu Tools -> Addon Manager Draft_Text - + Text - + Creates an annotation. CTRL to snap @@ -1500,12 +1660,12 @@ from menu Tools -> Addon Manager Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. - + Toggle Construction Mode @@ -1513,12 +1673,12 @@ from menu Tools -> Addon Manager Draft_ToggleContinueMode - + Toggle Continue Mode - + Toggles the Continue Mode for next commands. @@ -1526,12 +1686,12 @@ from menu Tools -> Addon Manager Draft_ToggleDisplayMode - + Toggle display mode - + Swaps display mode of selected objects between wireframe and flatlines @@ -1539,30 +1699,35 @@ from menu Tools -> Addon Manager Draft_ToggleGrid - + Toggle Grid - + Toggles the Draft grid on/off - + Grid + + + Toggles the Draft grid On/Off + + Draft_Trimex - + Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -1570,12 +1735,12 @@ from menu Tools -> Addon Manager Draft_UndoLine - + Undo last segment - + Undoes the last drawn segment of the line being drawn @@ -1583,12 +1748,12 @@ from menu Tools -> Addon Manager Draft_Upgrade - + Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces @@ -1596,12 +1761,12 @@ from menu Tools -> Addon Manager Draft_VisGroup - + VisGroup - + Adds a VisGroup @@ -1609,12 +1774,12 @@ from menu Tools -> Addon Manager Draft_Wire - + DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain @@ -1622,13 +1787,13 @@ from menu Tools -> Addon Manager Draft_WireToBSpline - - Wire to BSpline + + Wire to B-spline - - Converts between Wire and BSpline + + Converts between Wire and B-spline @@ -1640,17 +1805,17 @@ from menu Tools -> Addon Manager - + This is the default color for objects being drawn while in construction mode. - + This is the default group name for construction geometry - + Construction @@ -1660,42 +1825,42 @@ from menu Tools -> Addon Manager - + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode - + Global copy mode - + Default working plane - + None - + XY (Top) - + XZ (Front) - + YZ (Side) - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001) @@ -1763,17 +1928,17 @@ such as "Arial:Bold" - + Construction group name - + Tolerance - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. @@ -1844,12 +2009,12 @@ Values with differences below this value will be treated as same. - + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - + Select base objects after copying @@ -1884,22 +2049,22 @@ Values with differences below this value will be treated as same. - + Internal precision level - + This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. - + Left (ISO standard) - + Right @@ -1999,12 +2164,12 @@ Values with differences below this value will be treated as same. - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available @@ -2024,12 +2189,12 @@ Values with differences below this value will be treated as same. - + Construction geometry - + Construction geometry color @@ -2068,21 +2233,6 @@ Values with differences below this value will be treated as same. Project exported objects along current view direction - - - Ellipse export is badly supported. Use this to export them as polylines instead. - - - - - Path to Teigha File Converter - - - - - The path to your Teigha File Converter executable - - Visual settings @@ -2149,22 +2299,22 @@ Values with differences below this value will be treated as same. - + Dot - + Circle - + Arrow - + The default size of arrows @@ -2174,17 +2324,17 @@ Values with differences below this value will be treated as same. - + The space between the dimension line and the dimension text - + Select a font file - + Fill objects with faces whenever possible @@ -2233,18 +2383,13 @@ Values with differences below this value will be treated as same. Treat ellipses and splines as polylines - - - Max Spline Segment: - - Export style - + Show the unit suffix in dimensions @@ -2299,32 +2444,32 @@ Values with differences below this value will be treated as same. - + Dashed line definition - + 0.09,0.05 - + Dashdot line definition - + 0.09,0.05,0.02,0.05 - + Dotted line definition - + 0.02,0.02 @@ -2359,42 +2504,37 @@ Values with differences below this value will be treated as same. - - Extension lines size - - - - + Arrows style - + Arrows size - + Text orientation - + Text spacing - + ShapeString settings - + Default ShapeString font file - + Drawing view line definitions @@ -2484,7 +2624,7 @@ Values with differences below this value will be treated as same. - + Prefix labels of Clones with: @@ -2521,7 +2661,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2576,7 +2716,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + An SVG linestyle definition @@ -2600,1356 +2740,785 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable + + + If this is checked, step-by-step instructions will be displayed in the Output Window when running Draft commands + + + + + Verbose command line mode + + + + + When drawing lines, set focus on Length instead of X coordinate + + + + + Extension lines size + + + + + Extension line overshoot + + + + + The default length of extension line above dimension line + + + + + Dimension line overshoot + + + + + The default distance the dimension line is extended past extension lines + + + + + Tick + + + + + Tick-2 + + + + + Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) + + + + + Preserve colors of faces during downgrade/upgrade + + + + + Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) + + + + + Preserve names of faces during downgrade/upgrade + + + + + Path to ODA (formerly Teigha) File Converter + + + + + The path to your ODA (formerly Teigha) File Converter executable + + + + + Ellipse export is poorly supported. Use this to export them as polylines instead. + + + + + Max Spline Segment: + + Workbench - + Draft Snap - + Draft creation tools - + Draft modification tools + + + Utilities + + + + + Wire tools + + + + + Snapping + + draft - - Draft.makeBSpline: not enough points - - - - - - Draft.makeBSpline: Equal endpoints forced Closed - - - - - - Draft.makeBSpline: Invalid pointslist - - - - - + not shape found - + All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object - - BSplines and Bezier curves are not supported by this tool - - - - - No object given - - - - - - The two points are coincident - - - - - - Found groups: closing each open object inside - - - - - - Found mesh(es): turning into Part shapes - - - - - - Found 1 solidificable object: solidifying it - - - - - - Found 2 objects: fusing them - - - - - - Found several objects: creating a shell - - - - - - Found several coplanar objects or faces: creating one face - - - - - - Found 1 non-parametric objects: draftifying it - - - - - - Found 1 closed sketch object: creating a face from it - - - - - - Found 1 linear object: converting to line - - - - - - Found closed wires: creating faces - - - - - - Found 1 open wire: closing it - - - - - - Found several open wires: joining them - - - - - - Found several edges: wiring them - - - - - - Found several non-treatable objects: creating compound - - - - - - Unable to upgrade these objects. - - - - - - Found 1 block: exploding it - - - - - - Found 1 multi-solids compound: exploding it - - - - - - Found 1 parametric object: breaking its dependencies - - - - - - Found 2 objects: subtracting them - - - - - - Found several faces: splitting them - - - - - - Found several objects: subtracting them from the first one - - - - - - Found 1 face: extracting its wires - - - - - - Found only wires: extracting their edges - - - - - - No more downgrade possible - - - - - - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - - - - - + Draft Command Bar - + Toggle construction mode - + Current line color - + Current face color - + Current line width - + Current font size - + Apply to selected objects - + Autogroup off - + active command: - + None - + Active Draft command - + X coordinate of next point - + X - + Y - + Z - + Y coordinate of next point - + Z coordinate of next point - + Enter point - + Enter a new point with the given coordinates - + Length - + Angle - + Length of current segment - + Angle of current segment - - Check this to lock the current angle (l) - - - - + Radius - + Radius of Circle - - &Relative - - - - - Coordinates relative to last point or absolute (SPACE) - - - - - F&illed - - - - - Check this if the object should appear as filled, otherwise it will appear as wireframe (i) - - - - - &Finish - - - - - Finishes the current drawing or editing operation (F) - - - - + If checked, command will not finish until you press the command button again - - Co&ntinue - - - - + If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset - + Add points to the current object - + Remove points from the current object - + Make Bezier node sharp - + Make Bezier node tangent - + Make Bezier node symmetric - - &Undo - - - - - Undo the last segment (CTRL+Z) - - - - - Cl&ose - - - - - Finishes and closes the current line (C) - - - - - &Wipe - - - - - Wipes the existing segments of this line and starts again from the last point (W) - - - - - &Set WP - - - - - Reorients the working plane on the last segment (S) - - - - - &Select edge - - - - - Selects an existing edge to be measured by this dimension (E) - - - - + Sides - + Number of sides - + Offset - + XY (top) - + Select XY plane - + XZ (front) - + Select XZ plane - + YZ (side) - + Select YZ plane - + View - + Select plane perpendicular to the current view - + Auto - + Do not project points to a drawing plane - - C&opy - - - - - If checked, objects will be copied instead of moved (O) - - - - + Text string to draw - + String - + Height of text - + Height - + Intercharacter spacing - + Tracking - + Full path to font file: - + Open a FileChooser for font file - + Grid spacing - + The spacing between the grid lines - + Main line every - + The number of lines between main lines - + Center plane on view - + Select Plane - + Line - + DWire - + Circle - + Center X - + Arc - + Point - + Label - + Distance - + Trim - + Pick Object - + Edit - + Global X - + Global Y - + Global Z - + Local X - + Local Y - + Local Z - + Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. - + Please enter a text string. - + Select a Font file - + Please enter a font file. - + Autogroup: - + Faces - + Remove - + Add - + Facebinder elements - - Pick a face to define the drawing plane - - - - - - Pick first point: - - - - - + Create Line - - Create DWire - - - - - DWire has been closed - - - - - - Last point has been removed - - - - - + Pick next point: - - Pick next point, or Finish (shift-F) or close (o): - - - - - - Unable to create a Wire from selected objects - - - - - + Convert to Wire - + BSpline - - Spline has been closed - - - - - - Create BSpline - - - - + BezCurve - - Bezier curve has been closed - - - - - + Create BezCurve - + Rectangle - + Create Plane - + Create Rectangle - - Pick opposite point: - - - - - - Pick center point: - - - - - - Pick radius: - - - - - - Pick start angle: - - - - - - Pick aperture: - - - - - + Create Circle - + Create Arc - + Start Angle - + Aperture - - Aperture angle: - - - - - + Polygon - + Create Polygon - + Ellipse - + Create Ellipse - + Text - - Pick location point: - - - - - + Create Text - + Dimension - + Create Dimension - - Edges don't intersect! - - - - - + ShapeString - - Pick ShapeString location point: - - - - - + Create ShapeString - - Select an object to move - - - - - - Pick start point: - - - - - + Copy - + Move - - Pick end point: - - - - - + Change Style - - Select an object to rotate - - - - - - Pick rotation center: - - - - - + Rotate - - Pick base angle: - - - - - - Pick rotation angle: - - - - - - Select an object to offset - - - - - - Offset only works on one object at a time - - - - - + Cannot offset this object type - - Sorry, offset of Bezier curves is currently still not supported - - - - - - Pick distance: - - - - - - Select an object to stretch - - - - - - Pick first point of selection rectangle: - - - - - - Pick opposite point of selection rectangle: - - - - - - Pick start point of displacement: - - - - - - Pick end point of displacement: - - - - - - Turning one Rectangle into a Wire  - - - - - + Stretch - - Select an object to upgrade - - - - - + Upgrade - + Downgrade - - Select object(s) to trim/extend - - - - - - Unable to trim these objects, only Draft wires and arcs are supported - - - - - - Unable to trim these objects, too many wires - - - - - - These objects don't intersect - - - - - - Too many intersection points - - - - - - Select an object to scale - - - - - - Pick base point: - - - - - - Select an object to project - - - - - - This object type is not editable - - - - - - Please select only one object - - - - - - Select a Draft object to edit - - - - - - Active object must have more than two points/nodes - - - - - + Selection is not a Knot - - Endpoint of BezCurve can't be smoothed - - - - - - Select an object to convert - - - - - + Convert to Sketch - + Convert to Draft - + Convert - - Select an object to array - - - - - + Array - - Please select base and path objects - - - - - + Create Point - - Select an object to clone - - - - - - Select face(s) on existing object(s) - - - - - - Select an object to mirror - - - - - - Pick start point of mirror line: - - - - - + Mirror - - Pick end point of mirror line: - - - - - - This tool only works with Wires and Lines - - - - - - Pick target point: - - - - - - Pick endpoint of leader line: - - - - - - Pick text position: - - - - - + &Draft - - - Utilities - - - - - Wire tools - - - - - Snapping - - - - - Teigha File Converter not found, DWG support is disabled. - - - The DXF import/export libraries needed by FreeCAD to handle @@ -3974,5 +3543,697 @@ https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. + + + Draft.makeBSpline: not enough points + + + + + Draft.makeBSpline: Equal endpoints forced Closed + + + + + Draft.makeBSpline: Invalid pointslist + + + + + No object given + + + + + The two points are coincident + + + + + Found groups: closing each open object inside + + + + + Found mesh(es): turning into Part shapes + + + + + Found 1 solidifiable object: solidifying it + + + + + Found 2 objects: fusing them + + + + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + + + + Found 1 non-parametric objects: draftifying it + + + + + Found 1 closed sketch object: creating a face from it + + + + + Found 1 linear object: converting to line + + + + + Found closed wires: creating faces + + + + + Found 1 open wire: closing it + + + + + Found several open wires: joining them + + + + + Found several edges: wiring them + + + + + Found several non-treatable objects: creating compound + + + + + Unable to upgrade these objects. + + + + + Found 1 block: exploding it + + + + + Found 1 multi-solids compound: exploding it + + + + + Found 1 parametric object: breaking its dependencies + + + + + Found 2 objects: subtracting them + + + + + Found several faces: splitting them + + + + + Found several objects: subtracting them from the first one + + + + + Found 1 face: extracting its wires + + + + + Found only wires: extracting their edges + + + + + No more downgrade possible + + + + + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + + + + + No point found + + + + + + ShapeString: string has no wires + + + + + Relative + + + + + Continue + + + + + Close + + + + + Fill + + + + + Exit + + + + + Snap On/Off + + + + + Increase snap radius + + + + + Decrease snap radius + + + + + Restrict X + + + + + Restrict Y + + + + + Restrict Z + + + + + Select edge + + + + + Add custom snap point + + + + + Length mode + + + + + Wipe + + + + + Set Working Plane + + + + + Cycle snap object + + + + + Check this to lock the current angle + + + + + Coordinates relative to last point or absolute + + + + + Filled + + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe + + + + + Finish + + + + + Finishes the current drawing or editing operation + + + + + &Undo (CTRL+Z) + + + + + Undo the last segment + + + + + Finishes and closes the current line + + + + + Wipes the existing segments of this line and starts again from the last point + + + + + Set WP + + + + + Reorients the working plane on the last segment + + + + + Selects an existing edge to be measured by this dimension + + + + + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands + + + + + options + + + + + Default + + + + + Pick a face to define the drawing plane + + + + + First point: + + + + + Closing + + + + + Create Wire + + + + + Removing last point + + + + + Next point: + + + + + Restarting from + + + + + Unable to create a Wire from selected objects + + + + + Spline has been closed + + + + + Last point has been removed + + + + + Pick next point, or Finish (shift-F) or close (o): + + + + + Create B-spline + + + + + Bezier curve has been closed + + + + + Pick first point: + + + + + Pick opposite point: + + + + + Pick center point: + + + + + Pick radius: + + + + + Pick start angle: + + + + + Pick aperture: + + + + + Aperture angle: + + + + + Pick location point: + + + + + Edges don't intersect! + + + + + Pick ShapeString location point: + + + + + Select an object to move + + + + + Pick start point: + + + + + Pick end point: + + + + + Select an object to rotate + + + + + Pick rotation center: + + + + + Pick base angle: + + + + + Pick rotation angle: + + + + + Select an object to offset + + + + + Offset only works on one object at a time + + + + + Sorry, offset of Bezier curves is currently still not supported + + + + + Pick distance: + + + + + Select an object to stretch + + + + + Pick first point of selection rectangle: + + + + + Pick opposite point of selection rectangle: + + + + + Pick start point of displacement: + + + + + Pick end point of displacement: + + + + + Turning one Rectangle into a Wire + + + + + Select an object to join + + + + + Join + + + + + Select an object to split + + + + + Select an object to upgrade + + + + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + + + + Too many intersection points + + + + + Select an object to scale + + + + + Pick base point: + + + + + Pick reference distance from base point: + + + + + Pick new distance from base point: + + + + + Select an object to project + + + + + This object type is not editable + + + + + Please select only one object + + + + + Select a Draft object to edit + + + + + Active object must have more than two points/nodes + + + + + Endpoint of BezCurve can't be smoothed + + + + + Select an object to convert + + + + + Select an object to array + + + + + Please select base and path objects + + + + + Please select base and pointlist objects + + + + + + Select an object to clone + + + + + Select face(s) on existing object(s) + + + + + Select an object to mirror + + + + + Pick start point of mirror line: + + + + + Pick end point of mirror line: + + + + + This tool only works with Wires and Lines + + + + + Pick target point: + + + + + Pick endpoint of leader line: + + + + + Pick text position: + + + + + ODA (formerly Teigha) File Converter not found, DWG support is disabled + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index ce5144adae..05fc444310 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -1,6 +1,67 @@ + + BoundarySelector + + + Select Faces/Edges/Vertexes + + + + + To add references select them in the 3D view and then click "Add". + + + + + ControlWidget + + + Solver Control + + + + + Working Directory + + + + + Write + + + + + Edit + + + + + Elapsed Time: + + + + + Run + + + + + Re-write + + + + + Re-run + + + + + Abort + + + FEM_Analysis @@ -13,6 +74,79 @@ Creates a analysis container with standard solver CalculiX + + + Creates an analysis container with standard solver CalculiX + + + + + FEM_ClippingPlaneAdd + + + Clipping plane on face + + + + + Add a clipping plane on a selected face + + + + + FEM_ClippingPlaneRemoveAll + + + Remove all clipping planes + + + + + FEM_ConstraintBodyHeatSource + + + Constraint body heat source + + + + + Creates a FEM constraint body heat source + + + + + FEM_ConstraintElectrostaticPotential + + + Constraint electrostatic potential + + + + + Creates a FEM constraint electrostatic potential + + + + + FEM_ConstraintFlowVelocity + + + Constraint flow velocity + + + + + Creates a FEM constraint flow velocity + + + + + FEM_ConstraintInitialFlowVelocity + + + Constraint initial flow velocity + + FEM_ConstraintSelfWeight @@ -65,6 +199,81 @@ Creates a FEM shell plate thickness + + + Shell plate thickness + + + + + Creates a FEM shell plate thickness + + + + + FEM_ElementRotation1D + + + Beam rotation + + + + + Creates a FEM beam rotation + + + + + FEM_EquationElasticity + + + Elasticity equation + + + + + Creates a FEM equation for elasticity + + + + + FEM_EquationElectrostatic + + + Electrostatic equation + + + + + Creates a FEM equation for electrostatic + + + + + FEM_EquationFlow + + + Flow equation + + + + + Creates a FEM equation for flow + + + + + FEM_EquationFluxsolver + + + Fluxsolver equation + + + + + Creates a FEM equation for fluxsolver + + FEM_FEMMesh2Mesh @@ -78,17 +287,14 @@ Convert the surface of a FEM mesh to a mesh - - - FEM_MaterialFluid - - FEM material for Fluid + + FEM mesh to mesh - - Creates a FEM material for Fluid + + Convert the surface of a FEM mesh to a mesh @@ -104,17 +310,22 @@ Creates a nonlinear mechanical material + + + Nonlinear mechanical material + + FEM_MaterialSolid - - FEM material for solid + + Creates a FEM material for solid - - Creates a FEM material for solid + + FEM material for solid @@ -143,30 +354,22 @@ Clear the Mesh of a FEM mesh object - - - FEM_MeshFromShape - - FEM mesh from shape by Netgen + + Clear FEM mesh - - Create a FEM volume mesh from a solid or face shape by Netgen internal mesher + + Clear the Mesh of a FEM mesh object - FEM_MeshGmshFromShape + FEM_MeshDisplayInfo - - FEM mesh from shape by GMSH - - - - - Create a FEM mesh from a shape by GMSH mesher + + Display FEM mesh info @@ -182,12 +385,14 @@ Creates a FEM mesh group - - - FEM_MeshPrintInfo - - Print FEM mesh info + + FEM mesh group + + + + + Creates a FEM mesh group @@ -229,17 +434,27 @@ Purges all results from active analysis - - - FEM_SolverCalculix - - Solver CalculiX + + Purge results - - Creates a FEM solver CalculiX + + Purges all results from active analysis + + + + + FEM_SolverCalculiX + + + Solver CalculiX (experimental) + + + + + Creates a FEM solver CalculiX (experimental) @@ -255,6 +470,16 @@ Changes solver attributes and runs the calculations for the selected solver + + + Solver job control + + + + + Changes solver attributes and runs the calculations for the selected solver + + FEM_SolverRun @@ -295,16 +520,143 @@ - + Default Fem Command MenuText - + Default Fem Command ToolTip + + GeometryElementsSelection + + + Geometry reference selector for a + + + + + Add + + + + + Click on "Add" and select geometric elements to add them to the list. If no geometry is added to the list, all remaining ones are used. The following geometry elements are allowed to select: + + + + + Selection mode + + + + + Solid + + + + + Material_Editor + + + Material editor + + + + + Opens the FreeCAD material editor + + + + + SolidSelector + + + Select Solids + + + + + Select elements part of the solid that shall be added to the list. To than add the solid click "Add". + + + + + _Selector + + + Add + + + + + Remove + + + + + FEM_MaterialFluid + + + FEM material for Fluid + + + + + Creates a FEM material for Fluid + + + + + FEM_MeshFromShape + + + FEM mesh from shape by Netgen + + + + + Create a FEM volume mesh from a solid or face shape by Netgen internal mesher + + + + + FEM_MeshGmshFromShape + + + FEM mesh from shape by GMSH + + + + + Create a FEM mesh from a shape by GMSH mesher + + + + + FEM_MeshPrintInfo + + + Print FEM mesh info + + + + + FEM_SolverCalculix + + + Solver CalculiX + + + + + Creates a FEM solver CalculiX + + + FEM_BeamSection @@ -878,21 +1230,6 @@ Create a FEM analysis - - CmdFemCreateFromShape - - Fem - Fem - - - Create FEM mesh - Skep FEM-maas - - - Create FEM mesh from shape - Skep FEM-maas van vorm - - CmdFemCreateNodesSet @@ -1055,29 +1392,6 @@ User directory - - FemGui::HypothesisWidget - - Hypothesis - Hipotese - - - Quadrangle - Vierhoek - - - Maximum length - Maksimum lengte - - - Local length - Lokale lengte - - - Maximum element area - Maksimum elementoppervlak - - FemGui::TaskAnalysisInfo @@ -1353,18 +1667,6 @@ Only faces and edges can be picked Only faces and edges can be picked - - Point load [N] - Point load [N] - - - Line load [N/mm] - Line load [N/mm] - - - Area load [N/mm²] - Area load [N/mm²] - FemGui::TaskFemConstraintGear @@ -1570,14 +1872,6 @@ Time: Time: - - Write Calculix Input File - Write Calculix Input File - - - Edit Calculix Input File - Edit Calculix Input File - Mechanical material @@ -1648,14 +1942,6 @@ MatWeb database... MatWeb database... - - 0 kg/m^3 - 0 kg/m^3 - - - Pa - Pa - QObject @@ -1718,26 +2004,6 @@ Edit constraint Edit constraint - - Combo View - Saamgestelde aansig - - - combiTab - combiTab - - - qt_tabwidget_stackedwidget - qt_tabwidget_stackedwidget - - - ShaftWizard - ShaftWizard - - - ShaftWizardLayout - ShaftWizardLayout - @@ -1855,14 +2121,6 @@ Slider max: Slider max: - - Colors - Kleure - - - mm - mm - TaskAnalysisInfo diff --git a/src/Mod/Image/Gui/Resources/translations/Image.ts b/src/Mod/Image/Gui/Resources/translations/Image.ts index 7833e664f2..3777bc8d03 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image.ts @@ -1,6 +1,57 @@ + + Dialog + + + Scale image plane + + + + + Distance + + + + + Select first point + + + + + <font color='red'>Enter distance</font> + + + + + <font color='red'>Select ImagePlane</font> + + + + + Select second point + + + + + Select Image Plane and type distance + + + + + Image_Scaling + + + Scale image plane + + + + + Scales an image plane by defining a distance between two points + + + CmdCreateImagePlane diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts index 0a37c1a2a1..3e94dd1305 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts @@ -131,62 +131,62 @@ OpenSCAD - + Convert Edges to Faces - + Please select 3 objects first - + Unsupported Function - + Press OK - + Add - + Clear - + as Mesh - + Add OpenSCAD Element - + Perform - + Mesh Boolean - + Error all shapes must be either 2D or both must be 3D - + Unable to explode %s @@ -194,12 +194,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -207,12 +207,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes - + Color Shapes by validity and type @@ -220,7 +220,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces @@ -228,12 +228,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements - + Expand all placements downwards the FeatureTree @@ -241,25 +241,25 @@ OpenSCAD_ExplodeGroup - + Explode Group - - remove fusion, apply placement to children and color randomly + + Remove fusion, apply placement to children, and color randomly OpenSCAD_Hull - + Hull - + Perform Hull @@ -267,12 +267,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - + Create Feature that allows to increase the tolerance @@ -280,25 +280,25 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... - - Export objects as meshes and use OpenSCAD to perform a boolean operation. + + Export objects as meshes and use OpenSCAD to perform a boolean operation OpenSCAD_Minkowski - + Minkowski - + Perform Minkowski @@ -306,12 +306,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature - + Create Refine Shape Feature @@ -319,12 +319,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects @@ -332,13 +332,13 @@ OpenSCAD_ReplaceObject - + Replace Object - - Replace an object in the Feature Tree. Please select old, new and parent object + + Replace an object in the Feature Tree. Please select old, new, and parent object diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 355006233d..7c05f0a184 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -1,6 +1,335 @@ + + AttachmentEditor + + + No object named {name} + + + + + Failed to parse link (more than one colon encountered) + + + + + Object {name} is neither movable nor attachable, can't edit attachment + + + + + {obj} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + + + + + Attachment + + + + + Continue + + + + + Edit attachment of {feat} + + + + + Ignored. Can't attach object to itself! + + + + + {obj1} depends on object being attached, can't use it for attachment + + + + + {mode} (add {morerefs}) + + + + + {mode} (add more references) + + + + + Reference combinations: + + + + + Reference{i} + + + + + Selecting... + + + + + Failed to resolve links. {err} + + + + + Not attached + + + + + Attached with mode {mode} + + + + + Error: {err} + + + + + Attachment Offset: + + + + + Attachment Offset (inactive - not attached): + + + + + Attachment... + + + + + Edit attachment of selected object. + + + + + Part_CompoundFilter + + + Compound Filter + + + + + Compound Filter: remove some childs from a compound + + + + + Select a shape that is a compound, first! Second selected item (optional) will be treated as a stencil. + + + + + Bad selection + + + + + Computing the result failed with an error: + +{err} + +Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + Part_ExplodeCompound + + + Explode compound + + + + + Explode compound: split up a list of shapes into separate objects + + + + + Select a shape that is a compound, first! + + + + + Bad selection + + + + + Part_JoinConnect + + + Connect objects + + + + + Fuses objects, taking care to preserve voids. + + + + + Part_JoinCutout + + + Cutout for object + + + + + Makes a cutout in one object to fit another object. + + + + + Part_JoinEmbed + + + Embed object + + + + + Fuses one object into another, taking care to preserve voids. + + + + + Part_JoinFeatures + + + Computing the result failed with an error: + +{err} + + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + Bad selection + + + + + Continue + + + + + Select at least two objects, or one or more compounds, first! + + + + + Select base object, then the object to embed, and invoke this tool. + + + + + Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. + + + + + Part_MakeTube + + + Create tube + + + + + Creates a tube + + + + + Part_SplitFeatures + + + Computing the result failed with an error: + +{err} + +Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + Bad selection + + + + + Continue + + + + + Boolean Fragments + + + + + Split objects where they intersect + + + + + Select at least two objects, or one or more compounds, first! If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + + + + + Slice to compound + + + + + Split object by intersections with other objects, and pack the pieces into a compound. + + + + + Select at least two objects, first! First one is the object to be sliced; the rest are objects to slice with. + + + + + Slice apart + + + + + Split object by intersections with other objects. + + + + + Boolean XOR + + + + + Remove intersection fragments + + + Attacher diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 791f0b89ec..221bcde564 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -9,8 +9,38 @@ - - The Sample Interval. Small values cause long wait + + The direction along which dropcutter lines are created + + + + + Should the operation be limited by the stock object or by the bounding box of the base object + + + + + Additional offset to the selected bounding box + + + + + Step over percentage of the drop cutter path + + + + + Z-axis offset from the surface of the object + + + + + The Sample Interval. Small values cause long wait times + + + + + Enable optimization which removes unnecessary points from G-Code output @@ -28,16 +58,6 @@ The base path to modify - - - The position of this dressup in the base path - - - - - The modification to be added - - Angles less than filter angle will not receive corner actions @@ -63,19 +83,39 @@ The Z height of the hop + + + The object to be reached by this hop + + + + + The Z height of the hop + + + + + Calculate roll-on to path + + + + + Calculate roll-off from path + + + + + Keep the Tool Down in Path + + Fixture Offset Number - - The tool controller that will be used to calculate the path - - - - - The gcode to be inserted + + Length or Radius of the approach @@ -83,14 +123,34 @@ Ramping Method + + + Make False, to prevent operation from generating code + + + + + Ramping Method + + + + + Which feed rate to use for ramping + + + + + Custom feedrate + + Incremental Drill depth before retracting to clear chips - - Names of the holes + + Enable pecking @@ -109,13 +169,13 @@ - - Enable pecking + + Height to clear top of material - - Height to clear top of material + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -124,8 +184,13 @@ - - How far the cutter should extend past the boundary + + Enable pecking + + + + + The time to dwell between peck cycles @@ -148,6 +213,11 @@ The base object this collision refers to + + + The base geometry of this toolpath + + Side of edge that tool should cut @@ -183,6 +253,11 @@ Extra offset to apply to the operation. Direction is operation dependent. + + + clearing pattern to use + + Start pocketing at center or boundary @@ -199,8 +274,13 @@ - - clearing pattern to use + + Make True, if using Cutter Radius Compensation + + + + + Extra value to stay away from final profile- good for roughing toolpath @@ -213,16 +293,6 @@ Pattern method - - - The Height offset number of the active tool - - - - - The first height value in Z, to rapid to, before making a feed move in Z - - The active tool @@ -263,6 +333,56 @@ Rapid rate for horizontal moves + + + Pattern method + + + + + The active tool + + + + + Feed rate for horizontal moves + + + + + Rapid rate for vertical moves in Z + + + + + Rapid rate for horizontal moves + + + + + The Sample Interval. Small values cause long wait + + + + + The gcode to be inserted + + + + + How far the cutter should extend past the boundary + + + + + The Height offset number of the active tool + + + + + The first height value in Z, to rapid to, before making a feed move in Z + + The NC output file for this project @@ -283,26 +403,16 @@ Name of the Machine that will use the CNC program + + + The tooltable used for this CNC program + + For computing Paths; smaller increases accuracy, but slows down computation - - - The vertex index to start the path from - - - - - Side of edge that tool should cut - - - - - The base geometry of this toolpath - - The base geometry of this object @@ -328,6 +438,11 @@ Rapid Safety Height between locations. + + + The vertex index to start the path from + + An optional comment for this Operation @@ -358,11 +473,6 @@ The base object this represents - - - The tooltable used for this CNC program - - The base Shape of this toolpath @@ -441,12 +551,6 @@ Parent job %s doesn't have a base object - - - this object already in the list - - - Heights @@ -478,8 +582,13 @@ - - The Job Base Object has no engraveable element. Engraving operation will produce no output. + + No parent job found for operation. + + + + + Parent job %s doesn't have a base object @@ -488,8 +597,8 @@ - - Path + + Partial Commands @@ -502,6 +611,11 @@ New Operations + + + Edit + + Helpful Tools @@ -518,8 +632,54 @@ - - Partial Commands + + Pick Start Point + + + + + Engraving Operations + + + + + 3D Operations + + + + + Project Setup + + + + + Tool Commands + + + + + New Operations + + + + + Path Modification + + + + + Helpful Tools + + + + + this object already in the list + + + + + + The Job Base Object has no engraveable element. Engraving operation will produce no output. @@ -556,142 +716,29 @@ no job for op %s found. - - - PathDressup_Dogbone - - The base path to modify + + job %s has no Base. - - The side of path to insert bones - - - - - The style of boness - - - - - Bones that aren't dressed up - - - - - The algorithm to determine the bone length - - - - - Dressup length if Incision == custom - - - - - Edit Dogbone Dress-up - - - - - Dogbone Dress-up - - - - - Creates a Dogbone Dress-up object from a selected path - - - - - Please select one path object - - - - - - The selected object is not a path - - - - - - Please select a Profile/Contour or Dogbone Dressup object - - - - - Create Dogbone Dress-up - - - - - Please select a Profile/Contour or Dogbone Dressup object - - - - - Create Dogbone Dress-up - - - - - PathDressup_DragKnife - - - DragKnife Dress-up - - - - - Modifies a path to add dragknife corner actions - - - - - Please select one path object - - - - - - The selected object is not a path - - - - - - Please select a Path object - - - - - Create Dress-up - - - - - DragKnife Dress-up - - - - - PathDressup_HoldingTag - - - Holding Tag - - - - - Holding Tag + + no job for op %s found. PathDressup_HoldingTags + + + Edit HoldingTags Dress-up + + + + + Edit HoldingTags Dress-up + + The base path to modify @@ -738,292 +785,6 @@ - - - Edit HoldingTags Dress-up - - - - - Done - - - - - The base path to modify - - - - - Width of tags. - - - - - Height of tags. - - - - - Angle of tag plunge and ascent. - - - - - Radius of the fillet for the tag. - - - - - Locations of insterted holding tags - - - - - Ids of disabled holding tags - - - - - Factor determining the # segments used to approximate rounded tags. - - - - - Cannot insert holding tags for this path - please select a Profile path - - - - - - Edit HoldingTags Dress-up - - - - - Done - - - - - PathDressup_RampEntry - - - The base path to modify - - - - - Angle of ramp. - - - - - RampEntry Dress-up - - - - - Creates a Ramp Entry Dress-up object from a selected path - - - - - The base path to modify - - - - - Angle of ramp. - - - - - RampEntry Dress-up - - - - - Creates a Ramp Entry Dress-up object from a selected path - - - - - PathDressup_Tag - - - The selected object is not a path - - - - - - Please select a Profile object - - - - - Create a Tag dressup - - - - - Tag Dress-up - - - - - Creates a Tag Dress-up object from a selected path - - - - - Please select one path object - - - - - - Create Tag Dress-up - - - - - The base path to modify - - - - - Width of tags. - - - - - Height of tags. - - - - - Angle of tag plunge and ascent. - - - - - Radius of the fillet for the tag. - - - - - Locations of insterted holding tags - - - - - Ids of disabled holding tags - - - - - Factor determining the # segments used to approximate rounded tags. - - - - - No Base object found. - - - - - Base is not a Path::Feature object. - - - - - Base doesn't have a Path to dress-up. - - - - - Base Path is empty. - - - - - The selected object is not a path - - - - - - Please select a Profile object - - - - - Create a Tag dressup - - - - - Tag Dress-up - - - - - Creates a Tag Dress-up object from a selected path - - - - - Please select one path object - - - - - - Create Tag Dress-up - - - - - The base path to modify - - - - - Width of tags. - - - - - Height of tags. - - - - - Angle of tag plunge and ascent. - - - - - Radius of the fillet for the tag. - - - - - Locations of insterted holding tags - - - - - No Base object found. - - - - - Base Path is empty. - - PathDrilling @@ -1037,16 +798,6 @@ Creates a Path Drilling object from a features of a base object - - - Drilling - - - - - Creates a Path Drilling object from a features of a base object - - PathEngrave @@ -1061,24 +812,26 @@ - - Engrave + + The Job Base Object has no engraveable element. Engraving operation will produce no output. + + + + + PathCustom + + + The gcode to be inserted + + + + + The tool controller that will be used to calculate the path PathFace - - - Generating toolpath with libarea offsets. - - - - - - Pick Start Point - - Face @@ -1094,11 +847,78 @@ Create Face + + + Face + + Create a Facing Operation from a model or face + + + Generating toolpath with libarea offsets. + + + + + + Pick Start Point + + + + + PathGeom + + + edge %s not handled, assuming not vertical + + + + + isVertical(%s) not supported + + + + + isHorizontal(%s) not supported + + + + + isVertical(%s) not supported + + + + + isHorizontal(%s) not supported + + + + + %s not support for flipping + + + + + PathGui + + + %s has no property %s (%s)) + + + + + Cannot find property %s of %s + + + + + Cannot find property %s of %s + + PathHelix @@ -1127,11 +947,6 @@ Radius increment (must be smaller than tool diameter) - - - PathHelix - - Creates a helix cut from selected circles @@ -1153,23 +968,211 @@ - + The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) - + Start cutting from the inside or outside - + Radius increment (must be smaller than tool diameter) + + PathJob + + + Stock not from Base bound box! + + + + + Stock not a box! + + + + + Stock not a cylinder! + + + + + Unsupported stock object %s + + + + + Unsupported stock type %s (%d) + + + + + Solid object to be used as stock. + + + + + Compound path of all operations in the order they are processed. + + + + + Unsupported PathJob template version %s + + + + + Stock not from Base bound box! + + + + + Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + + + + Box: %.2f x %.2f x %.2f + + + + + Cylinder: %.2f x %.2f + + + + + Unsupported stock type + + + + + Arguments for the Post Processor (specific to the script) + + + + + An optional description for this job + + + + + For computing Paths; smaller increases accuracy, but slows down computation + + + + + Solid object to be used as stock. + + + + + The base object for all operations + + + + + Compound path of all operations in the order they are processed. + + + + + Collection of tool controllers available for this job. + + + + + SetupSheet holding the settings for this job + + + + + Unsupported PathJob template version %s + + + + + Solids + + + + + 2D + + + + + Jobs + + + + + Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + + + + Box: %.2f x %.2f x %.2f + + + + + Cylinder: %.2f x %.2f + + + + + Unsupported stock type + + + + + Select Output File + + + PathOp + + + The base geometry for this operation + + + + + Holds the calculated value for the StartDepth + + + + + An optional comment for this Operation + + + + + User Assigned Label + + + + + Base locations for this operation + + + + + The base geometry for this operation + + + + + Holds the calculated value for the StartDepth + + Base Geometry @@ -1180,6 +1183,11 @@ Base Location + + + Holds the max Z value of Stock + + Depths @@ -1190,16 +1198,6 @@ Operation - - - The base geometry for this operation - - - - - Holds the calculated value for the StartDepth - - Holds the calculated value for the FinalDepth @@ -1216,18 +1214,44 @@ - + An optional comment for this Operation - + User Assigned Label - - Base locations for this operation + + Starting Depth of Tool- first cut depth in Z + + + + + Final Depth of Tool- lowest value in Z + + + + + The height needed to clear clamps and obstructions + + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + + Depths + + + + + Operation @@ -1243,6 +1267,51 @@ The distance the facing operation will extend beyond the boundary shape. + + + 3D Pocket + + + + + Creates a Path 3D Pocket object from a face or faces + + + + + Pocket does not support shape %s.%s + + + + + Vertical faces do not form a loop - ignoring + + + + + Adaptive clearing and profiling + + + + + Pass Extension + + + + + The distance the facing operation will extend beyond the boundary shape. + + + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + Generating toolpath with libarea offsets. @@ -1268,15 +1337,25 @@ - - The tool number in use + + Face Profile - + Face Profile + + + Profile based on face or faces + + + + + The tool number in use + + The current tool in use @@ -1415,116 +1494,164 @@ - PathGeom + PathStock - - edge %s not handled, assuming not vertical + + Height of this stock box - - isVertical(%s) not supported + + Radius of this stock cylinder - - isHorizontal(%s) not supported + + Corrupted or incomplete placement information in template - ignoring + + + + + Corrupted or incomplete specification for creating stock from base - ignoring extent + + + + + Corrupted or incomplete size for creating a stock box - ignoring size + + + + + Corrupted or incomplete size for creating a stock cylinder - ignoring size + + + + + Unsupported stock type named {} + + + + + Unsupported PathStock template version {} + + + + + Length of this stock box + + + + + Width of this stock box + + + + + Height of this stock box + + + + + Radius of this stock cylinder + + + + + Height of this stock cylinder + + + + + Internal representation of stock type + + + + + Corrupted or incomplete placement information in template - ignoring + + + + + Corrupted or incomplete specification for creating stock from base - ignoring extent + + + + + Corrupted or incomplete size for creating a stock box - ignoring size + + + + + Corrupted or incomplete size for creating a stock cylinder - ignoring size + + + + + Unsupported stock type named {} + + + + + Unsupported PathStock template version {} + + + + + Stock + + + + + Creates a 3D object to represent raw stock to mill the part out of - PathGui + PathToolController - - %s has no property %s (%s)) + + Unsupported PathToolController template version %s - - Cannot find property %s of %s + + Error updating TC: %s + + + + + Unsupported PathToolController template version %s + + + + + Error updating TC: %s - PathJob + PathToolLibraryManager - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f + + Unsupported Path tooltable template version %s - - Box: %.2f x %.2f x %.2f + + Unsupported Path tooltable template version %s + + + + + PathUtils + + + Issue determine drillability: {} - - Cylinder: %.2f x %.2f - - - - - Unsupported stock type - - - - - Stock not from Base bound box! - - - - - Stock not a box! - - - - - Stock not a cylinder! - - - - - Unsupported stock object %s - - - - - Unsupported stock type %s (%d) - - - - - The base object for all operations - - - - - Solid object to be used as stock. - - - - - Compound path of all operations in the order they are processed. - - - - - Collection of tool controllers available for this job. - - - - - SetupSheet holding the settings for this job - - - - - Unsupported PathJob template version %s - - - - - Select Output File + + Issue determine drillability: {} @@ -1558,8 +1685,7 @@ - Please select exactly one path object - + Please select exactly one path object @@ -1642,16 +1768,205 @@ - + Custom - + Creates a path object based on custom G-code + + Path_Dressup + + + Please select one path object + + + + + + The selected object is not a path + + + + + + Please select a Path object + + + + + Create Dress-up + + + + + Please select one path object + + + + + + The selected object is not a path + + + + + + Please select a Path object + + + + + Dress-up + + + + + Creates a Path Dess-up object from a selected path + + + + + Path_DressupAxisMap + + + The base path to modify + + + + + The input mapping axis + + + + + The radius of the wrapped axis + + + + + Axis Map Dress-up + + + + + Remap one axis to another. + + + + + Create Dress-up + + + + + Path_DressupDogbone + + + The base path to modify + + + + + The side of path to insert bones + + + + + The style of bones + + + + + Bones that aren't dressed up + + + + + The algorithm to determine the bone length + + + + + Dressup length if Incision == custom + + + + + Edit Dogbone Dress-up + + + + + Dogbone Dress-up + + + + + Creates a Dogbone Dress-up object from a selected path + + + + + Please select one path object + + + + + The selected object is not a path + + + + + Create Dogbone Dress-up + + + + + Path_DressupDragKnife + + + DragKnife Dress-up + + + + + Modifies a path to add dragknife corner actions + + + + + Please select one path object + + + + + The selected object is not a path + + + + + Please select a Path object + + + + + Create Dress-up + + + + + Path_DressupLeadInOut + + + The Style of LeadIn the Path + + + Path_Fixture @@ -1679,11 +1994,6 @@ Creates a Fixture Offset object - - - Create a Fixture Offset - - Path_Hop @@ -1714,28 +2024,11 @@ Create Hop - - - Hop - - Creates a Path Hop object - - - Please select one path object - - - - - - The selected object is not a path - - - Create Hop @@ -1770,20 +2063,9 @@ <b>Note</b>: Pressing OK will commit any change you make above to the object, but if the object is parametric, these changes will be overridden on recompute. - - - Inspect G-code - - - - - Inspects the G-code contents of a path - - - Please select exactly one path object - + Please select exactly one path object @@ -1809,6 +2091,11 @@ Exports Path Job as a template to be used for other jobs + + + Create Job + + Edit Job @@ -1829,54 +2116,17 @@ All Files (*.*) + + + Path_DressupTag - - Create Job + + Please select a Profile object - - Job - - - - - Creates a Path Job object - - - - - Export Template - - - - - Exports Path Job as a template to be used for other jobs - - - - - Edit Job - - - - - Uncreate Job - - - - - Select Output File - - - - - All Files (*.*) - - - - - Create Job + + Base Path is empty. @@ -1888,7 +2138,7 @@ - + Copy the operation in the job @@ -1957,19 +2207,13 @@ - + Dressups Path_Sanity - - - It appears the machine limits haven't been set. Not able to check path extents. - - - Check the Path project for common errors @@ -2008,6 +2252,11 @@ Check the Path Project for common errors + + + The Job has no selected Base object. + + A Postprocessor has not been selected. @@ -2020,6 +2269,16 @@ + + + A Postprocessor has not been selected. + + + + + No output file is named. You'll be prompted during postprocessing. + + A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. @@ -2027,8 +2286,23 @@ - - The Job has no selected Base object. + + No active operations was found. Post processing will not result in any tooling. + + + + + A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. + + + + + No issues detected, {} has passed basic sanity check. + + + + + It appears the machine limits haven't been set. Not able to check path extents. @@ -2051,13 +2325,19 @@ - + Complete loop selection from two edges Path_SimpleCopy + + + Please select exactly one path object + + + Simple Copy @@ -2068,12 +2348,6 @@ Creates a non-parametric copy of another path - - - Please select exactly one path object - - - Simple Copy @@ -2086,8 +2360,7 @@ - Please select exactly one path object - + Please select exactly one path object @@ -2114,142 +2387,79 @@ - - Path_Surface - - - This operation requires OpenCamLib to be installed. - - - - - - Please select a single solid object from the project tree - - - - - - Cannot work with this object - - - - - - This operation requires OpenCamLib to be installed. - - - - - - Hold on. This might take a minute. - - - - Path_ToolController + + + Tool Number to Load + + Add Tool Controller to the Job - - Add Tool Controller - - - - + Add Tool Controller to the Job - + Add Tool Controller - - - Tool Number to Load - - - - - Path_ToolLenOffset - - - Tool Length Offset - - - - - Create a Tool Length Offset object - - - - - Create a Selection Plane object - - - - - Tool Length Offset - - - - - Create a Tool Length Offset object - - - - - Create a Selection Plane object - - Path_ToolTable - - - Edit the Tool Library - - Tool Manager - + Tool Manager + + + Edit the Tool Library + + + + + Surface + + + 3D Surface + + + + + Create a 3D Surface Operation from a model + + + + + 3D Surface + + + + + Create a 3D Surface Operation from a model + + TooltableEditor - - - Tooltable XML (*.xml) - - - - - Open tooltable - - - - - Save tooltable - - Tooltable JSON (*.json) - + Tooltable XML (*.xml) @@ -2263,16 +2473,6 @@ LinuxCNC tooltable (*.tbl) - - - Open tooltable - - - - - Save tooltable - - Tooltable editor @@ -2488,11 +2688,21 @@ mm + + + Open tooltable + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + + + Save tooltable + + Object not found @@ -2503,6 +2713,36 @@ Object doesn't have a tooltable property + + + Tooltable JSON (*.json) + + + + + Tooltable XML (*.xml) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + + + + Open tooltable + + + + + Save tooltable + + Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) @@ -2510,140 +2750,312 @@ - PathStock + Path_SetupSheet - - Height of this stock box - - - - - Radius of this stock cylinder - - - - - Corrupted or incomplete placement information in template - ignoring - - - - - Corrupted or incomplete specification for creating stock from base - ignoring extent - - - - - Corrupted or incomplete size for creating a stock box - ignoring size - - - - - Corrupted or incomplete size for creating a stock cylinder - ignoring size - - - - - Unsupported stock type named {} - - - - - Unsupported PathStock template version {} - - - - - Stock - - - - - Creates a 3D object to represent raw stock to mill the part out of + + Edit SetupSheet - PathToolController + Path_Simulator - - Unsupported PathToolController template version %s + + CAM Simulator - - Error updating TC: %s + + Simulate Path G-Code on stock - PathToolLibraryManager + Path_Surface - - Unsupported Path tooltable template version %s + + This operation requires OpenCamLib to be installed. + + + + + Hold on. This might take a minute. + + + + + + This operation requires OpenCamLib to be installed. + + + + + + Please select a single solid object from the project tree + + + + + + Cannot work with this object + - PathUtils + PathDressup_Dogbone - - Issue determine drillability: {} - - - - - Surface - - - 3D Surface + + The base path to modify - - Create a 3D Surface Operation from a model - - - - - Path_Dressup - - - Dress-up + + The side of path to insert bones - - Creates a Path Dess-up object from a selected path + + The style of boness - + + Bones that aren't dressed up + + + + + The algorithm to determine the bone length + + + + + Dressup length if Incision == custom + + + + + Edit Dogbone Dress-up + + + + + Dogbone Dress-up + + + + + Creates a Dogbone Dress-up object from a selected path + + + + Please select one path object - + The selected object is not a path - - Creates a Path Dress-up object from a selected path + + Create Dogbone Dress-up - + + Please select a Profile/Contour or Dogbone Dressup object + + + + + PathDressup_DragKnife + + + DragKnife Dress-up + + + + + Modifies a path to add dragknife corner actions + + + + + Please select one path object + + + + + + The selected object is not a path + + + + + Please select a Path object - + Create Dress-up + + PathDressup_HoldingTag + + + Holding Tag + + + + + PathDressup_RampEntry + + + The base path to modify + + + + + Angle of ramp. + + + + + RampEntry Dress-up + + + + + Creates a Ramp Entry Dress-up object from a selected path + + + + + PathDressup_Tag + + + The base path to modify + + + + + Width of tags. + + + + + Height of tags. + + + + + Angle of tag plunge and ascent. + + + + + Radius of the fillet for the tag. + + + + + Locations of insterted holding tags + + + + + Ids of disabled holding tags + + + + + Factor determining the # segments used to approximate rounded tags. + + + + + No Base object found. + + + + + Base is not a Path::Feature object. + + + + + Base doesn't have a Path to dress-up. + + + + + Base Path is empty. + + + + + The selected object is not a path + + + + + + Please select a Profile object + + + + + Create a Tag dressup + + + + + Tag Dress-up + + + + + Creates a Tag Dress-up object from a selected path + + + + + Please select one path object + + + + + + Create Tag Dress-up + + + + + Path_ToolLenOffset + + + Tool Length Offset + + + + + Create a Tool Length Offset object + + + + + Create a Selection Plane object + + + Path_Stock diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts index 2045d95a64..e3d639f154 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts @@ -102,7 +102,7 @@ - Center-align contents vertically of selected cells + Vertically center-align contents of selected cells @@ -222,14 +222,14 @@ - Set underline text in selected cells + Underline text in selected cells ColorPickerPopup - Custom + Custom Color @@ -338,6 +338,22 @@ Show spreadsheet + + Set cell(s) foreground color + + + + Sets the Spreadsheet cell(s) foreground color + + + + Set cell(s) background color + + + + Sets the Spreadsheet cell(s) background color + + QtColorPicker diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage.ts b/src/Mod/Start/Gui/Resources/translations/StartPage.ts index dc6d716173..f41aa7b010 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage.ts @@ -74,8 +74,8 @@ - - This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured and how to navigate in it, and how to develop new workbenches, or embed FreeCAD in your own application. + + This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. @@ -154,8 +154,8 @@ - - You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Custom folder + + See all commits on github @@ -208,6 +208,11 @@ Notes + + + Notes + + Workbench @@ -217,6 +222,11 @@ Start page + + + Start page + + CmdStartPage diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index 5b79a102e1..bfb48488b8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -4,165 +4,174 @@ CmdTechDrawAnnotation - + TechDraw - - &Annotation - - - - - - Inserts an Annotation in the active drawing + + + Insert Annotation CmdTechDrawArchView - + TechDraw - - Insert an ArchView + + Insert a Section Plane - - - Inserts a view of an Arch Section Plane into the active drawing + + Inserts a view of a Section Plane from Arch Workbench CmdTechDrawClip - + TechDraw - - &Clip - - - - - - Inserts a clip group in the active drawing + + + Insert Clip group CmdTechDrawClipMinus - + TechDraw - - &ClipMinus + + Remove View from ClipGroup - - - Remove a View from a clip group in the active drawing + + Remove a View from Clip group CmdTechDrawClipPlus - + TechDraw - - &ClipPlus + + Add View to Clip group - - Add a View to a clip group in the active drawing - - - - - Adds a View into a clip group in the active drawing + + Add a View to Clip group CmdTechDrawDraftView - + TechDraw - - Insert a DraftView + + Insert a DraftWB object - - - Inserts a Draft WB object into the active drawing + + Insert a View of a Draft Workbench object CmdTechDrawExportPage - + File - - &Export page... + + Export page as SVG - - + Export a page to an SVG file + + CmdTechDrawExportPageDxf + + + File + + + + + Export page as DXF + + + + + Export a page to a DXF file + + + + + Save Dxf File + + + + + Dxf (*.dxf) + + + CmdTechDrawImage - + TechDraw - + Insert bitmap image - - - Inserts a bitmap from a file in the active drawing + + + Inserts a bitmap from a file into a Page - + Select an Image File - + Image (*.png *.jpg *.jpeg) @@ -170,31 +179,41 @@ CmdTechDrawLinkDimension - + TechDraw - - + + Link a dimension to 3D geometry + + CmdTechDrawNewAngle3PtDimension + + + TechDraw + + + + + + Insert a new 3 point Angle dimension + + + CmdTechDrawNewAngleDimension - + TechDraw - - Insert a new angle dimension into the drawing - - - - + + Insert a new angle dimension @@ -202,35 +221,35 @@ CmdTechDrawNewDiameterDimension - + TechDraw - - Insert a new diameter dimension into the drawing + + Insert a new diameter dimension - - Insert a new diameter dimension feature for the selected view + + Insert a new diameter dimension feature CmdTechDrawNewDimension - + TechDraw - - Insert a dimension into the drawing + + Insert a dimension into a drawing - + Insert a new dimension @@ -238,35 +257,35 @@ CmdTechDrawNewDistanceXDimension - + TechDraw - - Insert a new horizontal dimension into the drawing + + Insert a new horizontal dimension - - Insert a new horizontal-distance dimension + + Insert a new horizontal distance dimension CmdTechDrawNewDistanceYDimension - + TechDraw - - Insert a new vertical dimension into the drawing + + Insert a new vertical dimension - + Insert a new vertical distance dimension @@ -274,13 +293,13 @@ CmdTechDrawNewGeomHatch - + TechDraw - - + + Apply geometric hatch to a Face @@ -288,13 +307,13 @@ CmdTechDrawNewHatch - + TechDraw - - + + Hatch a Face using image file @@ -302,59 +321,37 @@ CmdTechDrawNewLengthDimension - + TechDraw - - Insert a new length dimension into the drawing - - - - + + Insert a new length dimension - - CmdTechDrawNewMulti - - - TechDraw - - - - - Insert multi-part view in drawing - - - - - Insert a new View of a multiple Parts in the active drawing - - - CmdTechDrawNewPage - + TechDraw - - - Insert new drawing page from template + + + Insert new Page using Template - + Select a Template File - + Template (*.svg *.dxf) @@ -362,117 +359,101 @@ CmdTechDrawNewPageDef - + TechDraw - - - Insert new default drawing page + + + Insert new default Page CmdTechDrawNewRadiusDimension - + TechDraw - - Insert a new radius dimension into the drawing - - - - - Insert a new radius dimension feature for the selected view + + + Insert a new radius dimension CmdTechDrawNewView - + TechDraw - - Insert view in drawing - - - - - Insert a new View of a Part in the active drawing + + + Insert View in Page CmdTechDrawNewViewDetail - + TechDraw - - Insert detail view in drawing - - - - - Insert a new Detail View of a Part in the active drawing + + + Insert Detail View CmdTechDrawNewViewSection - + TechDraw - - Insert section view in drawing - - - - - Insert a new Section View of a Part in the active drawing + + + Insert Section View in Page CmdTechDrawProjGroup - + TechDraw - + Insert Projection Group - - Insert multiple views of a single part into the active drawing + + Insert multiple linked views of drawable object(s) CmdTechDrawRedrawPage - + TechDraw - - + + Redraw a page @@ -480,690 +461,787 @@ CmdTechDrawSpreadsheet - + TechDraw - - Spreadsheet + + Insert Spreadsheet view - - - Inserts a view of a selected spreadsheet into a drawing + + Inserts a view of a selected spreadsheet CmdTechDrawSymbol - + TechDraw - - Insert SVG &Symbol + + Insert SVG Symbol - - - Inserts a symbol from a svg file in the active drawing + + Insert symbol from a svg file CmdTechDrawToggleFrame - + TechDraw - - - Turn View Frames on or off + + + Turn View Frames On/Off QObject - - - - - - - - - - - - - - - + + + + + + + + + + + + + + Wrong selection - - - - Select at least 1 object with a Shape. + + + No Shapes or Groups in this selection - - - Select at least 1 DrawingView object. + + + Select at least 1 DrawViewPart object as Base. - - Select 1 DrawViewClip and 1 DrawView. + + Select 1 Clip group and 1 View. - - - Select exactly one Drawing View object. + + Select exactly one View to add to group. - - Select exactly one Clip object. + + Select exactly one Clip group. - + Clip and View must be from same Page. - + + Select exactly one View to remove from Group. + + + + View does not belong to a Clip - + Choose an SVG file to open - + Scalable Vector Graphic - + + Select at least one object. - - Select exactly one Arch Section Plane object. + + There is no Section Plane in selection. - - The selected object is not an Arch Section Plane. - - - - + Select exactly one Spreadsheet object. - + No Drawing View - + Open Drawing View before attempting export to SVG. - - - - - - - - - - - + + + + + + + + + + + + Incorrect Selection - - Can't make a Dimension from this selection + + Can not make a Dimension from this selection - - Can't make an angle Dimension from this selection + + + Selection Warning - + + Selected edge is a BSpline. Radius will be approximate. + + + + + Selected edge is a BSpline. Diameter will be approximate. + + + + + Need two straight edges to make an Angle Dimension + + + + + Need three points to make a 3 point Angle Dimension + + + + There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection - - - - - - - - + + + + + + + + Incorrect selection - + Select an object first - + Too many objects selected - - + Create a page first. - - - No DrawViewPart in selection. + + No View of a Part in selection. - + + No Feature with Shape in selection. + + + + No TechDraw Page - + Need a TechDraw Page for this command - + Select a Face first - + No TechDraw object in selection - + Create a page to insert. - - Can't make a Hatched area from this selection + + + No Faces to hatch in this selection - - No Face in this selection - - - - + No page found - - + + Create/select a page first. + + + + + Which page? + + + + Too many pages - + Can not determine correct page. - + Select exactly 1 page. - + PDF (*.pdf) - - + + All Files (*.*) - + Export Page As PDF - + SVG (*.svg) - + Export page as SVG - - %1.%2.%3 + + %1.%2.%3 - + FreeCAD SVG Export - + Show drawing - - Drawing viewer + + Toggle KeepUpdated + + + + + Click to update text TechDrawGui::DlgPrefsTechDraw2Imp - - TechDraw 2 - - - - + Dimensions - + Arrow Style - + Show Units - + Color - + Font Size - + Diameter Symbol - + ⌀ - + Alternate Decimals - + + TechDraw Dimensions + + + + Use Global Decimals - + Preferred arrowhead style - + 0 - Filled Triangle - + 1 - Open Arrowhead - + 2 - Tick - + 3 - Dot - + 4 - Open Circle - + Arrow Size - + + Dimension font size in units + + + + + Dimension arrowhead size in units + + + + Decorations - + + Adjusts size of vertices in drawing + + + + + Vertex Scale + + + + Round - + Square - + Section Line Style - + Center Line Style - + Matting Style - - + + NeverShow - - Sollid + + Line Group Name - - + + Vertex Color + + + + + Dash - - + + Dot - - + + DashDot - - + + DashDotDot - + + Solid - + Center Line Color - + Section Line Color - - - Default weight for GeomHatch lines - - - - - Hatch Weight - - TechDrawGui::DlgPrefsTechDrawImp - - TechDraw 1 - - - - + General - + Projection Angle - + First - + Third - - + + Hidden Line - + NeverShow - + Solid - + Dash - + Dot - + DashDot - + DashDotDot - + Detect Faces - + Show Section Edges - + Keep Pages Up to Date - - Template Dot Size + + TechDraw General - + + Style for hidden lines + + + + + Perform/skip face processing + + + + + Debugging option + + + + + Update Pages as scheduled or skip + + + + + Automatically distribute secondary views. + + + + + AutoDistribute Secondary Views + + + + Colors - + Section Hatch - + Section Face - + Normal - + PreSelected - + Selected - + Background - + Geom Hatch - + Files - + Template Directory - + Default Template - + Hatch Image - + + Line Group File + + + + Location of default svg/png fill file - + PAT File - + Default location for PAT file - + + Alternate Line Group file + + + + Default PAT pattern - + Pattern Name - + Labels - + Label Font - - osifont + + Font for View Labels - + + Editable Text Marker Size + + + + + View Label size in units + + + + + Size of editable text marker in Templates (green dot). + + + + Label Size @@ -1171,147 +1249,132 @@ TechDrawGui::MDIViewPage - + &Export SVG - - &Native + + Toggle &Keep Updated - - &OpenGL + + Toggle &Frames - - &Image - - - - - &High Quality Antialiasing - - - - - dummy[*] - - - - - &Renderer - - - - + Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size - - + + The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed - - Can't open file '%1' for writing. + + Can not open file %1 for writing. + + + + + Selected: TechDrawGui::QGVPage - - Drawing page: + + Drawing page: - - exported from FreeCAD document: + + exported from FreeCAD document: TechDrawGui::TaskGeomHatch - + Apply Geometric Hatch to Face - + Define your pattern - + The PAT file containing your pattern - + Pattern File - + Pattern Name - + Line Weight - + Pattern Scale - + Line Color - + Name of pattern within file - + Color of pattern lines - + Enlarges/shrinks the pattern - + Thickness of lines within the pattern @@ -1319,47 +1382,47 @@ Do you want to continue? TechDrawGui::TaskLinkDim - + Link Dimension - + Link This 3D Geometry - + Feature2: - + Feature1: - + Geometry1: - + Geometry2: - + To These Dimensions - + Available - + Selected @@ -1367,188 +1430,168 @@ Do you want to continue? TechDrawGui::TaskProjGroup - + Projection Group - + Projection - + First or Third Angle - - + + Page - + First Angle - + Third Angle - + Scale - + Scale Page/Auto/Custom - + Automatic - + Custom - + Custom Scale - + Scale Numerator - + : - + Scale Denominator - + Adjust Primary Direction - - Primary View Direction + + Current primary view direction - + Rotate right - + Rotate up - + Rotate left - - This function is temporarily unavailable. - - - - - Match 3D - - - - + Rotate down - - Return Primary Direction to Initial Value - - - - - Reset - - - - + Secondary Projections - + Bottom - + Primary - + Right - + Left - + LeftFrontBottom - + Top - + RightFrontBottom - + RightFrontTop - + Rear - + LeftFrontTop - + Spin CW - + Spin CCW @@ -1556,89 +1599,89 @@ Do you want to continue? TechDrawGui::TaskSectionView - + Quick Section Parameters - + Define Your Section - + Symbol - + Identifier for this section - + Origin Y - - - + + + Location of section plane - + Origin X - + Origin Z - + Looking down - + Looking right - + Looking left - + Looking up - + Calculated Values - + Projection Direction - + Section Normal - + Start over - + Reset @@ -1646,22 +1689,22 @@ Do you want to continue? TechDrawGui::dlgTemplateField - + Change Editable Field - + Text Name: - + TextLabel - + Value: diff --git a/src/Mod/Tux/Resources/translations/Tux.ts b/src/Mod/Tux/Resources/translations/Tux.ts index a83a41fb66..5d6e73862e 100644 --- a/src/Mod/Tux/Resources/translations/Tux.ts +++ b/src/Mod/Tux/Resources/translations/Tux.ts @@ -3,94 +3,94 @@ NavigationIndicator - + Select - + Zoom - + Rotate - + Pan - + Tilt - + Navigation style - + Page Up or Page Down key. - + Rotation focus - - Middle mouse button or key H. - - - - + Middle mouse button. - + Navigation style not recognized. - + Settings - + Orbit style - + Compact - + Tooltip - + Turntable - + Trackball - + Undefined + + + Middle mouse button or H key. + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web.ts b/src/Mod/Web/Gui/Resources/translations/Web.ts index 051509e0e1..b78c964149 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web.ts @@ -60,12 +60,8 @@ - Stop loading - - - - Stop the current loading + Stop loading @@ -78,12 +74,8 @@ - Zoom in - - - - Zoom into the page + Zoom in @@ -96,12 +88,8 @@ - Zoom out - - - - Zoom out of the page + Zoom out @@ -123,124 +111,16 @@ - - Form - - - Sketchfab exporter - - - - - What to upload? - - - - - Selection - - - - - All visible objects - - - - - Model name - - - - - Private - - - - - Description - - - - - Tags (separated by commas) - - - - - FreeCAD, - - - - - Format - - - - - OBJ + MTL (Arch exporter) - - - - - OBJ (standard Mesh exporter) - - - - - DAE (Collada) - - - - - STL - - - - - IGES (shapes only) - - - - - IV - - - - - Sketchfab API token - - - - - Obtain - - - - - Upload - - - - - uploading - - - - - Success! View uploaded online - - - QObject - + Browser - + File does not exist! @@ -248,12 +128,18 @@ WebGui::BrowserView - + + Error - + + There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. + + + + Loading %1... @@ -261,12 +147,12 @@ WebGui::WebView - + Open in External Browser - + Open in new window