From 4b7a5d2e98fff3b51391117cb29c8b780eac8e87 Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Thu, 27 May 2021 14:44:40 +0200 Subject: [PATCH] Updated translation files --- src/Mod/Arch/Resources/translations/Arch.ts | 48 +-- src/Mod/Draft/Resources/translations/Draft.ts | 218 ++++++++----- src/Mod/Fem/Gui/Resources/translations/Fem.ts | 10 +- .../Resources/translations/OpenSCAD.ts | 4 +- .../Part/Gui/Resources/translations/Part.ts | 20 +- .../Path/Gui/Resources/translations/Path.ts | 298 ++++++++++-------- .../Gui/Resources/translations/Sketcher.ts | 106 ++++--- .../Gui/Resources/translations/StartPage.ts | 77 ++--- .../Gui/Resources/translations/TechDraw.ts | 22 +- 9 files changed, 442 insertions(+), 361 deletions(-) diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 1cbfa1309a..0b7aef5ca8 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -1678,7 +1678,7 @@ - + Use the material color as this object's shape color, if available @@ -2041,7 +2041,7 @@ - + Components of this object @@ -2126,22 +2126,22 @@ - + Base component - + Additions - + Subtractions - + Objects @@ -2276,7 +2276,7 @@ - + Fixtures @@ -2341,7 +2341,7 @@ - + Error computing the shape of this object @@ -2366,17 +2366,17 @@ - + has no solid - + has an invalid shape - + has a null shape @@ -2531,7 +2531,7 @@ - + Group @@ -2987,7 +2987,7 @@ - + Hosts @@ -3047,57 +3047,57 @@ - + Toggle subcomponents - + Closing Sketch edit - + Component - + Edit IFC properties - + Edit standard code - + Property - + Add property... - + Add property set... - + New... - + New property - + New property set diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 9f17935284..6123043e56 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -1009,6 +1009,21 @@ Leave blank for system default. Use 'arch' to force US arch notation + + + Base object + + + + + A list of points on lines that need to be removed + + + + + A tolerance value for distances between points and edges + + Dialog @@ -1522,22 +1537,22 @@ The array can be turned into a polar or a circular array by changing its type. - + Save style - + Name of this new style: - + Name exists. Overwrite? - + Error: json module not found. Unable to save style @@ -2376,6 +2391,19 @@ Objects added to this layer can share the same visual properties such as line co + + Draft_Lineremover + + + Facebinder + + + + + Creates a lineremover object from a selected object + + + Draft_LinkArray @@ -3472,11 +3500,6 @@ value by using the [ and ] keys while drawing px - - - Apply to selected objects - - Lines and faces @@ -3507,6 +3530,41 @@ value by using the [ and ] keys while drawing Save current style as a preset... + + + Form + + + + + Add or remove points to/from the list below by clicking points on screen or highlighting an item and pressing the Delete button. Press OK when done + + + + + Deletes selected point in the list above + + + + + Delete + + + + + Apply above style to selected object(s) + + + + + Selected + + + + + Texts/dims + + Gui::Dialog::DlgSettingsDraft @@ -3634,7 +3692,7 @@ such as "Arial:Bold" - + Join geometry @@ -3729,12 +3787,12 @@ such as "Arial:Bold" - + Group layers into blocks - + Export 3D objects as polyface meshes @@ -3764,17 +3822,17 @@ such as "Arial:Bold" - + Use standard font size for texts - + Import hatch boundaries as wires - + Render polylines with width @@ -3819,32 +3877,32 @@ such as "Arial:Bold" - + Import - + texts and dimensions - + points - + layouts - + *blocks - + Project exported objects along current view direction @@ -3944,32 +4002,32 @@ such as "Arial:Bold" - + Create - + simple Part shapes - + Draft objects - + Sketches - + Get original colors from the DXF file - + Treat ellipses and splines as polylines @@ -3984,7 +4042,7 @@ such as "Arial:Bold" - + Allow FreeCAD to automatically download and update the DXF libraries @@ -4134,7 +4192,7 @@ such as "Arial:Bold" - + Use legacy python importer @@ -4159,22 +4217,22 @@ such as "Arial:Bold" - + Export Drawing Views as blocks - + Note: Not all the options below are used by the new importer yet - + Show this dialog when importing and exporting - + Automatic update (legacy importer only) @@ -4184,7 +4242,7 @@ such as "Arial:Bold" - + Scale factor to apply to imported files @@ -4304,12 +4362,12 @@ such as "Arial:Bold" - + Ellipse export is poorly supported. Use this to export them as polylines instead. - + Max Spline Segment: @@ -4325,7 +4383,7 @@ Values with differences below this value will be treated as same. This value wil - + Use legacy python exporter @@ -4660,67 +4718,60 @@ Note that this is not fully supported, and many object will be not editable with - + This preferences dialog will be shown when importing/ exporting DXF files - + Python importer is used, otherwise the newer C++ is used. Note: C++ importer is faster, but is not as featureful yet - - Python exporter is used, otherwise the newer C++ is used. -Note: C++ importer is faster, but is not as featureful yet - - - - - + Allow FreeCAD to download the Python converter for DXF import and export. You can also do this manually by installing the "dxf_library" workbench from the Addon Manager. - + If unchecked, texts and mtexts won't be imported - + If unchecked, points won't be imported - + If checked, paper space objects will be imported too - + If you want the non-named blocks (beginning with a *) to be imported too - + Only standard Part objects will be created (fastest) - + Parametric Draft objects will be created whenever possible - + Sketches will be created whenever possible - + Scale factor to apply to DXF files on import. The factor is the conversion between the unit of your DXF file and millimeters. Example: for files in millimeters: 1, in centimeters: 10, @@ -4728,69 +4779,69 @@ Example: for files in millimeters: 1, in centimeters: 10, - + Colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + FreeCAD will try to join coincident objects into wires. Note that this can take a while! - + Objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - + Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document - + If this is checked, DXF layers will be imported as Draft Layers - + Use Layers - + Hatches will be converted into simple wires - + If polylines have a width defined, they will be rendered as closed wires with correct width - + Maximum length of each of the polyline segments. If it is set to '0' the whole spline is treated as a straight segment. - + All objects containing faces will be exported as 3D polyfaces - + Drawing Views will be exported as blocks. This might fail for post DXF R12 templates. - + Exported objects will be projected to reflect the current view direction @@ -4892,6 +4943,12 @@ This value is the maximum segment length. G + + + Python exporter is used, otherwise the newer C++ is used. +Note: C++ exporter is faster, but is not as featureful yet + + ImportDWG @@ -5561,11 +5618,6 @@ To enabled FreeCAD to download these libraries, answer Yes. The two points are coincident - - - mirrored) - - Found 1 block: exploding it @@ -5641,11 +5693,6 @@ To enabled FreeCAD to download these libraries, answer Yes. Wrong input: incorrect type of points. - - - Cannot generate shape: - - Radius: @@ -7030,7 +7077,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Create Text @@ -7168,6 +7215,21 @@ Not available if Draft preference option 'Use Part Primitives' is enab Too many objects selected, max number set to: + + + mirrored + + + + + Cannot generate shape: + + + + + Select an existing object + + importOCA diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index d0543951df..1b65263e3b 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -74,11 +74,6 @@ Geometry reference selector for a - - - Geometry reference selector for a - - Add @@ -119,6 +114,11 @@ Solid + + + Geometry reference selector for a + + SolidSelector diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts index 6989457882..d43b942b7a 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts @@ -141,12 +141,12 @@ - + Unsupported Function - + Press OK diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 0e5288138c..53eb1a0e5e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -337,6 +337,16 @@ A 'Compound Filter' can be used to extract the individual slices.Slice apart + + + Boolean Fragments + + + + + Split objects where they intersect + + Slice a selected object by other objects, and split it apart. @@ -356,16 +366,6 @@ This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - - - - - Split objects where they intersect - - Continue diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index fdcc3e9cad..ace4b415b7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - - Stop index(angle) for rotational scan - - - - - Dropcutter lines are created parallel to this axis. - - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + + The completion mode for the operation: single or multi-pass @@ -74,13 +59,8 @@ - - The model will be rotated around this axis. - - - - - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + + + + + Additional offset to the selected bounding box + + + + + The model will be rotated around this axis. + + + + + Start index(angle) for rotational scan + + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied - - - The base geometry of this toolpath - - The tool controller that will be used to calculate the path @@ -588,6 +583,11 @@ Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + + Start pocketing at center or boundary @@ -674,8 +674,8 @@ - - The library to use to generate the path + + The base geometry of this toolpath @@ -921,6 +921,21 @@ Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + Legacy Tools not supported + + + + + Selected tool is not a drill + + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -931,11 +946,6 @@ Cutting Edge Angle (%.2f) results in negative tool tip length - - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - - Choose a writable location for your toolbits @@ -1140,11 +1150,6 @@ Rotated to inverse angle. - - - Rotated to 'InverseAngle' to attempt access. - - Selected feature(s) require 'Enable Rotation: A(x)' for access. @@ -1251,6 +1256,11 @@ Increased to stock top. Utils + + + Rotated to 'InverseAngle' to attempt access. + + this object already in the list @@ -1893,6 +1903,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + Normal @@ -1908,16 +1928,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Y - - - Pocket Shape - - - - - Creates a Path Pocket object from a face or faces - - 3D Pocket @@ -2318,8 +2328,8 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Custom points not at same Z height. + + The selected face is not oriented horizontally or vertically. @@ -2327,6 +2337,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Current offset value is not possible. + + + Custom points are identical. + + + + + Custom points not at same Z height. + + Current Extend Radius value produces negative arc radius. @@ -2348,8 +2368,8 @@ If it is necessary to set the FinalDepth manually please select a different oper - - The selected face is not oriented horizontally or vertically. + + The selected face is inaccessible. @@ -3313,16 +3333,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - - - - - Creates a Path Dess-up object from a selected path - - Please select one path object @@ -3340,6 +3350,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object + + + Dress-up + + + + + Creates a Path Dess-up object from a selected path + + Path_DressupAxisMap @@ -3812,6 +3832,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object + + + The selected object is not a path + + + Please select one path object @@ -3827,12 +3853,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop - - - The selected object is not a path - - - Path_Inspect @@ -4079,6 +4099,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + + Check the path job for common errors @@ -4159,11 +4184,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height - - - The Job has no selected Base object. - - Maximum Z Height @@ -4489,6 +4509,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + + Add Tool Controller to the Job @@ -4499,11 +4524,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller - - - Tool Number to Load - - Path_ToolTable @@ -4530,6 +4550,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4540,11 +4565,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - - Path_Waterline @@ -4579,11 +4599,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library + + + Tooltable JSON (*.json) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + Open tooltable + + + Save tooltable + + + + + Rename Tooltable + + + + + Enter Name: + + + + + Add New Tool Table + + + + + Delete Selected Tool Table + + + + + Rename Selected Tool Table + + Tooltable editor @@ -4794,11 +4859,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - - Tooltable XML (*.xml) @@ -4814,46 +4874,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property - - - Rename Tooltable - - - - - Enter Name: - - - - - Add New Tool Table - - - - - Delete Selected Tool Table - - - - - Rename Selected Tool Table - - - - - Tooltable JSON (*.json) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 745ac2100a..2d7c7c6ea8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -2539,22 +2539,22 @@ invalid constraints, degenerated geometry, etc. - + Drag Point - + Drag Curve - + Drag Constraint - + Modify sketch constraints @@ -4496,26 +4496,36 @@ Supports all unit systems except 'US customary' and 'Building US/ - By default, open a sketch in Section View mode -- objects are only visible behind sketch plane + When entering edit mode, force orthographic view of camera. Operates only with camera restoration enabled. + Force orthographic camera when entering edit + + + + + By default, open a sketch in Section View mode -- objects are only visible behind sketch plane + + + + Open sketch in Section View mode - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. - + View scale ratio - + The 3D view is scaled based on this factor @@ -4530,52 +4540,52 @@ Supports all unit systems except 'US customary' and 'Building US/ - + Applies current visibility automation settings to all sketches in open documents - + Apply to existing sketches - + Font size used for labels and constraints - + px - + Current sketcher creation tool will remain active after creation - + Geometry creation "Continue Mode" - + Grid line pattern - + Number of polygons for geometry approximation - + Unexpected C++ exception - + Sketcher @@ -5131,136 +5141,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch - + A dialog is already open in the task panel - + Do you want to close this dialog? - + Invalid sketch - + Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. - + Please remove the following constraint: - + Please remove at least one of the following constraints: - + Please remove the following redundant constraint: - + Please remove the following redundant constraints: - + The following constraint is partially redundant: - + The following constraints are partially redundant: - + Please remove the following malformed constraint: - + Please remove the following malformed constraints: - + Empty sketch - + Over-constrained sketch - + Sketch contains malformed constraints - + Sketch contains conflicting constraints - + Sketch contains redundant constraints - + Sketch contains partially redundant constraints - - - - - + + + + + (click to select) - + Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec - + Unsolved (%1 sec) diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage.ts b/src/Mod/Start/Gui/Resources/translations/StartPage.ts index 24d984a1ba..70542e53ec 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage.ts @@ -309,182 +309,187 @@ By using ";;" to separate paths, you can add several folders here - + + Displays help tips in the Start workbench Documents tab + + + + Fonts and colors - + The background of the main start page area - + Background color - + in FreeCAD - + In external browser - + Background color down gradient - + The color of the version text - + Link color - + An optional image to display as background - + If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below - + Page background color - + The color of the text on the main pages - + Background image - + Page text color - + The color of the links - + The background color of the boxes inside the pages - + Box background color - + The background color behind the panels - + The down gradient for the background color (currently unsupported) - + Open links - + Background text color - + Use FreeCAD style sheet - + Font family - + The font family to use on the start page. Can be a font name or a comma-separated series of fallback fonts - + Arial,Helvetica,sans - + The base font size to use for all texts of the Start page - + px - + Use gradient for New File icon - + If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon - + Options - + Choose which workbench to switch to after the program launches - + If checked, will automatically close the Start page when FreeCAD launches - + Switch workbench after loading - + Close start page after loading - + Close and switch on opening file - + If application is started by opening a file, apply the two settings above diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index c5e572c1e5..2f77ce9004 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -901,15 +901,10 @@ - + Create CenterLine - - - Edit CenterLine - - Update CosmeticLine @@ -1821,12 +1816,12 @@ - + Create Center Line - + Edit Center Line @@ -3733,17 +3728,6 @@ Do you want to continue? Continuous - - - Flips endpoints of selected lines for centerline creation, -see the FreeCAD Wiki '2LineCenterLine' for a description - - - - - Flip Ends - - Dash