diff --git a/src/Gui/Language/FreeCAD_be.qm b/src/Gui/Language/FreeCAD_be.qm index 4890559c18..ff5aab86df 100644 Binary files a/src/Gui/Language/FreeCAD_be.qm and b/src/Gui/Language/FreeCAD_be.qm differ diff --git a/src/Gui/Language/FreeCAD_be.ts b/src/Gui/Language/FreeCAD_be.ts index 56759151ab..ed8736fc1d 100644 --- a/src/Gui/Language/FreeCAD_be.ts +++ b/src/Gui/Language/FreeCAD_be.ts @@ -71,7 +71,7 @@ Base - База + Асноўныя @@ -99,7 +99,7 @@ Toggle measurement - Пераключыць замер + Пераключыць вымярэнне @@ -112,7 +112,7 @@ Import - Import + Імпарт @@ -758,37 +758,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Налады камеры - + Orientation Арыентацыя - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Бягучы выгляд @@ -928,7 +928,7 @@ while doing a left or right click and move the mouse up or down &Activate - &Актываваць + &Задзейнічаць @@ -1279,7 +1279,7 @@ be treated as shorctcut key sequence 'F, F'. This list shows commands having the same shortcut in the priority from high to low. If more than one command with the same shortcut are active at the same time. The one with the highest priority will be triggered. - У гэтым спісе адлюстраваны каманды з аднолькавым спалучэннем клавішаў у парадку прыярытэту ад высокага да нізкага. Калі адначасова актыўныя больш адной каманды з адным і тым жа спалучэннем клавішаў. Будзе запушчаны той, у якога самы высокі прыярытэт. + У гэтым спісе паказаны каманды з аднолькавым спалучэннем клавішаў у парадку прыярытэту ад высокага да нізкага. Калі адначасова актыўныя больш адной каманды з адным і тым жа спалучэннем клавішаў. Будзе запушчаны той, у якога самы высокі прыярытэт. @@ -2109,16 +2109,15 @@ this according to your screen size or personal taste Choose which workbench will be activated and shown after FreeCAD launches - Абраць, які варштат будзе актываваны і адлюстраваны пасля запуску FreeCAD + Абраць, які варштат будзе задзейнічаны і паказаны пасля запуску FreeCAD A Splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen - Экран застаўкі - гэта невялікае акно загрузкі, якое адлюстроўваецца -пры запуску FreeCAD. Калі гэты параметр уключаны, FreeCAD будзе -адлюстроўваць застаўку + Экран застаўкі - гэта невялікае акно загрузкі, якое паказваецца пры запуску FreeCAD. +Калі гэты параметр уключаны, FreeCAD будзе адлюстроўваць застаўку @@ -2791,12 +2790,12 @@ Specify another directory, please. Invalid input - Недапушчальны ўвод + Хібны ўвод Invalid key name '%1' - Недапушчальнае імя ключа '%1' + Хібнае імя ключа '%1' @@ -2950,7 +2949,7 @@ Specify another directory, please. License URL - Спасылак ліцэнзіі + URL-адрас ліцэнзіі @@ -3056,7 +3055,7 @@ Specify another directory, please. If enabled, then 3D view selection will be synchronized with full object hierarchy. - Калі ўключана, то трохмерны выгляд будзе сінхранізаваны з поўнай іерархіяй аб'ектаў. + Калі ўключана, то трохмернае прадстаўленне будзе сінхранізавана з поўнай іерархіяй аб'ектаў. @@ -3146,7 +3145,7 @@ on-screen while displaying the error Show report view on error - Адлюстраваць прагляд справаздачы пры памылцы + Паказаць прагляд справаздачы пры памылцы @@ -3158,31 +3157,29 @@ on-screen while displaying the warning Show report view on warning - Адлюстраваць прагляд справаздачы пры папярэджанні + Паказаць прагляд справаздачы пры папярэджанні When a normal message has occurred, the Report View dialog becomes visible on-screen while displaying the message - Калі адбылося звычайнае паведамленне, дыялогавае акно Прагляду справаздачы становіцца бачным -на экране, каб адлюстраваць звычайнае паведамленне + Калі адбылося звычайнае паведамленне, дыялогавае акно Прагляду справаздачы становіцца бачным на экране, каб адлюстраваць звычайнае паведамленне Show report view on normal message - Адлюстраваць прагляд справаздачы пры звычайным паведамленні + Паказаць прагляд справаздачы пры звычайным паведамленні When a log message has occurred, the Report View dialog becomes visible on-screen while displaying the log message - Калі адбылося паведамленне справаздачы, дыялогавае акно Прагляду справаздачы становіцца бачным -на экране, каб адлюстраваць паведамленне справаздачы + Калі адбылося паведамленне справаздачы, дыялогавае акно Прагляду справаздачы становіцца бачным на экране, каб адлюстраваць паведамленне справаздачы Show report view on log message - Адлюстраваць прагляд справаздачы пры паведамленні справаздачы + Паказаць прагляд справаздачы пры паведамленні справаздачы @@ -3347,7 +3344,7 @@ from Python console to Report view panel 3D View - Трохмерны выгляд + Трохмернае прадстаўленне @@ -3358,54 +3355,50 @@ from Python console to Report view panel Main coordinate system will always be shown in lower right corner within opened files - Асноўная сістэма каардынат заўсёды будзе адлюстроўвацца ў -правым ніжнім куце ў адчыненых файлах + Асноўная сістэма каардынат заўсёды будзе паказвацца ў правым ніжнім куце ў адчыненых файлах Show coordinate system in the corner - Адлюстраваць сістэму каардынат у куце + Паказаць сістэму каардынат у куце Relative size : - Адносны памер : + Адносны памер: Size of main coordinate system representation in the corner -- in % of height/width of viewport - Памер прадстаўлення асноўнай сістэмы каардынат -у куце -- у % ад вышыні/шырыні вобласці прагляду + Памер прадстаўлення асноўнай сістэмы каардынат у куце - у % ад вышыні/шырыні вобласці прагляду Axis cross will be shown by default at file opening or creation - Скрыжаванне восей будзе адлюстроўвацца першапачаткова пры -адкрыцці ці стварэнні файла + Скрыжаванне восей будзе паказвацца першапачаткова пры адкрыцці ці стварэнні файла Show axis cross by default - Першапачаткова адлюстроўваць скрыжаванне восей + Першапачаткова паказаць скрыжаванне восей Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files - Час, які неабходны для апошняй аперацыі, і выніковая частата кадраў -будуць паказаныя ў левым ніжнім куце адчыненых файлаў + Час, які неабходны для апошняй аперацыі, і выніковая частата кадраў будуць паказаныя ў левым ніжнім куце адчыненых файлаў Show counter of frames per second - Адлюстраваць лічыльнік кадраў у секунду + Паказаць лічыльнік кадраў у секунду If checked, application will remember which workbench is active for each tab of the viewport - Калі птушка, праграма запомніць, які бягучы варштат для кожнай укладкі вобласці прагляду + Калі птушка, праграма запомніць, які варштат бягучы для кожнай укладкі вобласці прагляду @@ -3454,14 +3447,10 @@ Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums Калі птушка, будуць ужывацца аб'екты буфера вяршыняў (VBO). -VBO - гэта функцыя OpenGL, якая забяспечвае метады загрузкі -дадзеных вяршыняў (становішча, вектар нармалі, колер і г. д.) на графічную карту. -VBO забяспечваюць значны прырост прадукцыйнасці, паколькі дадзеныя захоўваюцца -у графічнай памяці, а не ў сістэмнай, і таму яны -могуць быць візуалізаваныя непасрэдна графічным працэсарам. +VBO - гэта функцыя OpenGL, якая забяспечвае метады загрузкі дадзеных вяршыняў (становішча, вектар нармалі, колер і г. д.) на графічную карту. +VBO забяспечваюць значны прырост прадукцыйнасці, паколькі дадзеныя захоўваюцца ў графічнай памяці, а не ў сістэмнай, і таму яны могуць быць візуалізаваныя непасрэдна графічным працэсарам. -Заўвага: часам гэтая функцыя можа прывесці да мноства розных -праблем, пачынаючы ад графічных анамалій і заканчваючы збоямі графічнага працэсара. +Заўвага: часам гэтая функцыя можа прывесці да мноства розных праблем, пачынаючы ад графічных анамалій і заканчваючы збоямі графічнага працэсара. Не забудзьцеся паведаміць аб гэтай уключанай наладзе пры звароце па падтрымку на форумах FreeCAD @@ -3507,7 +3496,7 @@ but slower response to any scene changes. None - None + Нічога @@ -3569,7 +3558,7 @@ but slower response to any scene changes. Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Вобласць для выбару элементаў у трохмерным выглядзе. + Вобласць для выбару элементаў у трохмерным прадстаўленні. Большае значэнне палягчае выбар аб'ектаў, але можа зрабіць немагчымым выбар невялікіх аб'ектаў. @@ -3584,8 +3573,7 @@ Larger value eases to pick things, but can make small features impossible to sel The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. Адлегласць паміж вачамі, якая ўжываецца для стэрэа праекцыі. -Азначанае значэнне з'яўляецца каэфіцыентам, якое будзе памнажацца на памер -абмежавальнага прастакутніка трохмернага аб'екта, які ў бягучы час адлюстроўваецца. +Азначанае значэнне з'яўляецца каэфіцыентам, якое будзе памнажацца на памер габарытаў трохмернага аб'екта, які ў бягучы час адлюстроўваецца. @@ -3840,8 +3828,7 @@ bounding box size of the 3D object that is currently displayed. Data outside the specified min-max range will be displayed in gray - Дадзеныя за межамі паказанага найменшага-найбольшага дыяпазону -будуць адлюстраваныя шэрым колерам + Дадзеныя за межамі паказанага найменшага-найбольшага дыяпазону будуць адлюстраваныя шэрым колерам @@ -3857,8 +3844,7 @@ will be displayed in gray Data outside the specified min-max range will be displayed with transparency - Дадзеныя за межамі паказанага найменшага-найбольшага дыяпазону -будуць адлюстраваныя з празрыстасцю + Дадзеныя за межамі паказанага найменшага-найбольшага дыяпазону будуць адлюстраваныя з празрыстасцю @@ -4168,80 +4154,95 @@ You can also use the form: John Doe <john@doe.com> Першапачатковая ліцэнзія для новых дакументаў - + All rights reserved Усе правы абаронены - + Creative Commons Attribution Creative Commons з пазначэннем аўтарства (CC BY) - + Creative Commons Attribution-ShareAlike Creative Commons з пазначэннем аўтарства - з захаваннем умоў (CC BY-SA) - + Creative Commons Attribution-NoDerivatives Creative Commons з пазначэннем аўтарства - без вытворных (CC BY-ND) - + Creative Commons Attribution-NonCommercial Creative Commons з пазначэннем аўтарства - некамерцыйная (CC BY-NC) - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons з пазначэннем аўтарства - некамерцыйная - з захаваннем умоў (CC BY-NC-SA) - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons з пазначэннем аўтарства - некамерцыйная - без вытворных (CC BY-NC-ND) - + Public Domain Грамадскі набытак - + FreeArt Бясплатная графіка - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Іншы - + License URL - Спасылак ліцэнзіі + URL-адрас ліцэнзіі - + URL describing more about the license - Спасылак, які апісвае дадатковую інфармацыю аб ліцэнзіі + URL-адрас, які апісвае дадатковую інфармацыю аб ліцэнзіі Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Фармат даты, які ўжываецца. - + Default Першапачаткова - + Format Фармат @@ -4642,12 +4643,12 @@ You can also use the form: John Doe <john@doe.com> Commands executed by macro scripts are shown in Python console - Каманды, якія выконваюцца сцэнарам макраса, адлюстроўваюцца ў кансолі Python + Каманды, якія выконваюцца сцэнарам макраса, паказваюцца ў кансолі Python Show script commands in python console - Адлюстроўваць каманды сцэнара ў кансолі Python + Паказаць каманды сцэнара ў кансолі Python @@ -4725,7 +4726,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Кут, у якім паказаны куб навігацыі @@ -4764,6 +4764,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Назва шрыфту: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4781,8 +4786,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Памер шрыфту для тэксту куба навігацыі.</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4845,7 +4850,7 @@ Free Turntable: the part will be rotated around the z-axis. Rotations in 3D will use current cursor position as center for rotation - Вярчэнне ў 3D будзе ўжываць бягучае становішча курсора ў якасці цэнтру для вярчэння + Вярчэнне ў трохмерным прадстаўленні будзе ўжываць бягучае становішча курсора ў якасці цэнтру для вярчэння @@ -4946,52 +4951,52 @@ Mouse tilting is not disabled by this setting. Адключыць жэст нахілу для сэнсарнага экрану - + Isometric Ізаметрычны - + Dimetric Дзіметрычны - + Trimetric Трыметрычны - + Top Зверху - + Front Спераду - + Left Злева - + Right Справа - + Rear Ззаду - + Bottom Знізу - + Custom Custom @@ -5051,17 +5056,17 @@ horizontal space in Python console Auto switch to the 3D view containing the selected item - Аўтаматычнае пераключэнне на трохмерны выгляд, які змяшчае абраны элемент + Аўтаматычнае пераключэнне на трохмернае прадстаўленне, якое змяшчае абраны элемент Auto expand tree item when the corresponding object is selected in 3D view - Аўтаматычнае разгортванне элемента дрэва, калі абраны адпаведны аб'ект у трохмерным выглядзе + Аўтаматычнае разгортванне элемента дрэва, калі абраны адпаведны аб'ект у трохмерным прадстаўленні Preselect the object in 3D view when mouse over the tree item - Папярэдне абраць аб'ект у трохмерным выглядзе, калі паказальнік мышы наведзены на элемент дрэва + Папярэдне абраць аб'ект у трохмерным прадстаўленні, калі паказальнік мышы наведзены на элемент дрэва @@ -5104,7 +5109,7 @@ horizontal space in Python console Number of decimals that should be shown for numbers and dimensions - Колькасць дзесятковых знакаў, якая павінна быць адлюстравана для лікаў і вымярэнняў + Колькасць дзесятковых знакаў, якая павінна быць паказаныя для лікаў і вымярэнняў @@ -5399,12 +5404,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: невядомая адзінка вымярэння: - + unit mismatch неадпаведная адзінка вымярэння @@ -6208,7 +6213,7 @@ The 'Status' column shows whether the document could be recovered. Texture mapping - Адлюстраванне тэкстуры + Супастаўленне тэкстуры @@ -6238,12 +6243,12 @@ The 'Status' column shows whether the document could be recovered. No 3d view - Без трохмернага выгляду + Без трохмернага прадстаўлення No active 3d view found. - Без бягучага трохмернага выгляду. + Без бягучага трохмернага прадстаўлення. @@ -6281,7 +6286,7 @@ The 'Status' column shows whether the document could be recovered. Show dependencies - Адлюстраваць залежнасці + Паказаць залежнасці @@ -6412,7 +6417,7 @@ originally selected prior to opening this dialog Show Report view on - Адлюстраваць прагляд справаздачы на + Паказаць прагляд справаздачы на @@ -7024,14 +7029,14 @@ Do you want to save your changes? Toggles this toolbar - Пераключыць гэтую панэль інструментаў + Пераключае гэтую панэль інструментаў Toggles this dockable window - Пераключыць гэтае ўбудаванае акно + Пераключае гэтае ўбудаванае акно @@ -7294,20 +7299,20 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object - Змяніць злучаны аб'ект + Змяніць звязаны аб'ект Gui::PropertyEditor::LinkSelection - + Error Памылка - + Object not found Аб'ект не знойдзены @@ -7697,7 +7702,7 @@ Do you want to specify another directory? Opens a browser to show the Python modules documentation - Адчыняе аглядальнік, каб адлюстраваць дакументацыю модуляў Python + Адчыняе аглядальнік, каб паказаць дакументацыю модуляў Python @@ -8179,12 +8184,12 @@ Do you want to specify another directory? Activate document - Актываваць дакумент + Задзейнічаць дакумент Activate document %1 - Актываваць дакумент %1 + Задзейнічаць дакумент %1 @@ -8209,12 +8214,12 @@ Do you want to specify another directory? Show hidden items - Адлюстраваць схаваныя элементы + Паказаць схаваныя элементы Show hidden tree view items - Адлюстраваць схаваныя элементы дрэва + Паказаць схаваныя элементы дрэва @@ -8354,22 +8359,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Экспартаваць у PDF - + PDF file Файл PDF - + Opening file failed Немагчыма адчыніць файл - + Can't open file '%1' for writing. Немагчыма адчыніць файл '%1' для запісу. @@ -8538,7 +8543,7 @@ Do you want to specify another directory? Invalid input - Недапушчальны ўвод + Хібны ўвод @@ -8875,19 +8880,19 @@ Do you want to continue? Enter the name: - Enter the name: + Увядзіце назву: New text item - New text item + Новы тэкставы элемент Enter your text: - Enter your text: + Увядзіце тэкст: @@ -8903,7 +8908,7 @@ Do you want to continue? Enter your number: - Enter your number: + Увядзіце лік: @@ -8926,12 +8931,12 @@ Do you want to continue? Choose an item: - Choose an item: + Абярыце элемент: New boolean item - New boolean item + Новы лагічны элемент @@ -8941,17 +8946,17 @@ Do you want to continue? The group '%1' cannot be renamed. - The group '%1' cannot be renamed. + Суполка '%1' не можа быць пераназваная. Existing group - Existing group + Суполка, якая існуе The group '%1' already exists. - The group '%1' already exists. + Суполка '%1' ужо існуе. @@ -8965,22 +8970,22 @@ Do you want to continue? Do you want to skip confirmation of further critical message notifications while loading the file? - Do you want to skip confirmation of further critical message notifications while loading the file? + Ці жадаеце вы прапускаць пацверджанні далейшых апавяшчэнняў аб крытычных паведамленнях пры загрузцы файла? Critical Message - Critical Message + Крытычнае паведамленне Too many message notifications. Notification temporarily stopped. Look at the report view for more information. - Too many message notifications. Notification temporarily stopped. Look at the report view for more information. + Заншмат апавяшчэнняў аб паведамленнях. Апавяшчэнне часова спынена. Паглядзіце справаздачу для атрымання дадатковай інфармацыі. Warning - Warning + Папярэджанне @@ -8990,14 +8995,14 @@ Do you want to continue? Critical - Critical + Крытычна Identical physical path detected. It may cause unwanted overwrite of existing document! - Identical physical path detected. It may cause unwanted overwrite of existing document! + Выяўлены ідэнтычны фізічны шлях. Гэта можа прывесці да непажаданага перазапісу дакумента, які ўжо існуе! @@ -9009,18 +9014,18 @@ Do you want to continue? Please check report view for more... - Please check report view for more... + Калі ласка, праверце прагляд справаздачы, каб атрымаць дадатковую інфармацыю... Physical path: - Physical path: + Фізічны шлях: Document: - Document: + Дакумент: @@ -9031,12 +9036,12 @@ Do you want to continue? Identical physical path - Identical physical path + Ідэнтычны фізічны шлях Could not save document - Could not save document + Не атрымалася захаваць дакумент @@ -9045,45 +9050,45 @@ Do you want to continue? "%1" Would you like to save the file with a different name? - There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + Пры спробе захаваць файл паўстала праблема. Гэта можа быць звязана з тым, што некаторыя бацькоўскія каталогі не існуюць, альбо ў вас недастаткова дазволаў, ці па іншых прычынах. Звесткі пра памылку: "%1" -Would you like to save the file with a different name? +Ці жадаеце вы захаваць файл з іншым іменем? Saving aborted - Saving aborted + Захаванне перапынена Save dependent files - Save dependent files + Захаваць залежныя файлы The file contains external dependencies. Do you want to save the dependent files, too? - The file contains external dependencies. Do you want to save the dependent files, too? + Файл утрымлівае знешнія залежнасці. Ці жадаеце вы таксама захаваць залежныя файлы? Saving document failed - Saving document failed + Не атрымалася захаваць дакумент Save document under new filename... - Save document under new filename... + Захаваць дакумент з новым іменем файла... Save %1 Document - Save %1 Document + Захаваць дакумент %1 @@ -9094,42 +9099,42 @@ Would you like to save the file with a different name? Failed to save document - Failed to save document + Не атрымалася захаваць дакумент Documents contains cyclic dependencies. Do you still want to save them? - Documents contains cyclic dependencies. Do you still want to save them? + Дакументы ўтрымлівае цыклічныя залежнасці. Ці жадаеце вы яшчэ іх захаваць? Save a copy of the document under new filename... - Save a copy of the document under new filename... + Захаваць копію дакумента з новым іменем файла... %1 document (*.FCStd) - %1 document (*.FCStd) + Дакумент %1 (*.FCStd) Document not closable - Document not closable + Дакумент не можа быць зачынены The document is not closable for the moment. - The document is not closable for the moment. + На дадзены момант дакумент нельга зачыніць. Document not saved - Document not saved + Дакумент не захаваны The document%1 could not be saved. Do you want to cancel closing it? - The document%1 could not be saved. Do you want to cancel closing it? + Дакумент %1 не атрымалася захаваць. Ці жадаеце вы адмяніць яго закрыццё? @@ -9144,21 +9149,21 @@ Would you like to save the file with a different name? There are grouped transactions in the following documents with other preceding transactions - There are grouped transactions in the following documents with other preceding transactions + У наступных дакументах згрупаваныя аперацыі з іншымі папярэднімі аперацыямі Choose 'Yes' to roll back all preceding transactions. Choose 'No' to roll back in the active document only. Choose 'Abort' to abort - Choose 'Yes' to roll back all preceding transactions. -Choose 'No' to roll back in the active document only. -Choose 'Abort' to abort + Абярыце 'Так', каб адкаціць усе папярэднія аперацыі. +Абярыце 'Не', каб выканаць адкат толькі ў бягучым дакуменце. +Абярыце 'Перапыніць', каб перапыніць Save Macro - Save Macro + Захаваць макрас @@ -9182,12 +9187,12 @@ Choose 'Abort' to abort Inner - Inner + Унутры Outer - Outer + Звонку @@ -9198,67 +9203,67 @@ Choose 'Abort' to abort No Browser - No Browser + Без аглядальніку Unable to open your browser. Please open a browser window and type in: http://localhost:%1. - Unable to open your browser. + Не атрымалася адчыніць ваш аглядальнік. -Please open a browser window and type in: http://localhost:%1. +Калі ласка, адчыніце акно аглядальніку і ўвядзіце: http://localhost:%1. No Server - No Server + Без сервера Unable to start the server to port %1: %2. - Unable to start the server to port %1: %2. + Не атрымалася запусціць сервер на порт %1: %2. Unable to open your system browser. - Unable to open your system browser. + Не атрымалася запусціць сістэмны аглядальнік. Options... - Options... + Налады... - + Out of memory - Out of memory + Не хапае памяці - + Not enough memory available to display the data. - Not enough memory available to display the data. + Недастаткова памяці для адлюстравання дадзеных. Cannot find file %1 - Cannot find file %1 + Немагчыма знайсці файл %1 Cannot find file %1 neither in %2 nor in %3 - Cannot find file %1 neither in %2 nor in %3 + Немагчыма знайсці файл %1 ні ў %2, ні ў %3 Navigation styles - Navigation styles + Стылі навігацыі Move annotation - Move annotation + Рухаць заметку @@ -9274,12 +9279,12 @@ Please open a browser window and type in: http://localhost:%1. Do you want to save your changes to document '%1' before closing? - Do you want to save your changes to document '%1' before closing? + Ці жадаеце вы захаваць свае змены ў дакуменце '%1' перад закрыццём? Do you want to save your changes to document before closing? - Do you want to save your changes to document before closing? + Ці жадаеце вы захаваць свае змены ў дакуменце перад закрыццём? @@ -9289,17 +9294,17 @@ Please open a browser window and type in: http://localhost:%1. Apply answer to all - Apply answer to all + Прымяніць адказ да ўсіх %1 Document(s) not saved - %1 Document(s) not saved + %1 дакументы не захаваныя Some documents could not be saved. Do you want to cancel closing? - Some documents could not be saved. Do you want to cancel closing? + Некаторыя дакументы не атрымалася захаваць. Ці жадаеце вы адмяніць закрыццё? @@ -9309,7 +9314,7 @@ Please open a browser window and type in: http://localhost:%1. Not allowed to delete system-wide macros - Not allowed to delete system-wide macros + Не дазваляецца выдаляць агульнасістэмныя макрасы @@ -9319,12 +9324,12 @@ Please open a browser window and type in: http://localhost:%1. Delete group content? - Delete group content? + Выдаліць змест суполкі? The %1 is not empty, delete its content as well? - The %1 is not empty, delete its content as well? + %1 не пусты, ці выдаліць таксама і яго змест? @@ -9339,7 +9344,7 @@ Please open a browser window and type in: http://localhost:%1. Toggle active part - Toggle active part + Пераключыць бягучую дэталь @@ -9350,72 +9355,71 @@ Please open a browser window and type in: http://localhost:%1. Simple group - Simple group + Простая суполка Group with links - Group with links + Суполка з сувязямі Group with transform links - Group with transform links + Суполка з сувязямі пераўтварэння Create link group failed - Create link group failed + Не атрымалася стварыць суполку сувязяў Create link failed - Create link failed + Не атрымалася стварыць сувязь Failed to create relative link - Failed to create relative link + Не атрымалася стварыць адносную сувязь Unlink failed - Unlink failed + Не атрымалася разарваць сувязь Replace link failed - Replace link failed + Не атрымалася замяніць сувязь Failed to import links - Failed to import links + Не атрымалася імпартаваць сувязі Failed to import all links - Failed to import all links + Не атрымалася імпартаваць усе сувязі Invalid name - Invalid name + Хібная назва The property name or group name must only contain alpha numericals, underscore, and must not start with a digit. - The property name or group name must only contain alpha numericals, -underscore, and must not start with a digit. + Назва ўласцівасці ці назва суполкі павінна ўтрымліваць толькі літарна-лічбавыя абазначэнні, знак падкрэслівання, і не павінна пачынацца з лічбы. The property '%1' already exists in '%2' - The property '%1' already exists in '%2' + Уласцівасць '%1' ужо існуе ў '%2' @@ -9425,45 +9429,44 @@ underscore, and must not start with a digit. Failed to add property to '%1': %2 - Failed to add property to '%1': %2 + Не атрымалася дадаць уласцівасць да '%1': %2 Drag & drop failed - Drag & drop failed + Не атрымалася перамясціць Setup configurable object - Setup configurable object + Налада карыстальніцкага аб'екту Select which object to copy or exclude when configuration changes. All external linked objects are excluded by default. - Select which object to copy or exclude when configuration changes. All external linked objects are excluded by default. + Абярыце, які аб'ект капіраваць ці выключаць пры змене налад. Усе вонкавыя звязаныя аб'екты першапачаткова выключаныя. Please select which objects to copy when the configuration is changed - Please select which objects to copy when the configuration is changed + Калі ласка, абярыце, якія аб'екты капіраваць пры змене налад Apply to all - Apply to all + Ужыць да ўсіх Apply the setting to all links. Or, uncheck this option to apply only to this link. - Apply the setting to all links. Or, uncheck this -option to apply only to this link. + Прымяніць наладу да ўсіх сувязяў. Не птушка, каб прымяніць толькі да гэтай сувязі. Copy on change - Copy on change + Капіраваць пры зменах @@ -9473,7 +9476,7 @@ option to apply only to this link. Enable auto copy of linked object when its configuration is changed - Enable auto copy of linked object when its configuration is changed + Уключае аўтаматычнае капіраванне звязанага аб'екта пры змене яго налад @@ -9485,19 +9488,19 @@ option to apply only to this link. Copy the linked object when its configuration is changed. Also auto redo the copy if the original linked object is changed. - Copy the linked object when its configuration is changed. -Also auto redo the copy if the original linked object is changed. + Скапіраваць звязаны аб'ект пры змене яго налад. +Таксама аўтаматычна паўтарыць копіі, калі зыходны звязаны аб'ект быў зменены. Disable copy on change - Disable copy on change + Адключыць капіраванне пры зменах Refresh configurable object - Refresh configurable object + Перачытаць карыстальніцкі аб'ект @@ -9505,9 +9508,8 @@ Also auto redo the copy if the original linked object is changed. creating a new deep copy. Note that any changes made to the current copy will be lost. - Synchronize the original configurable source object by -creating a new deep copy. Note that any changes made to -the current copy will be lost. + Сінхранізуе зыходны зыходны аб'ект, які наладжваецца, з дапамогай стварэння новай глыбокай копіі. +Звярніце ўвагу, што любыя змены, якія ўнесеныя ў бягучую копію, будуць страчаныя. @@ -9518,18 +9520,18 @@ the current copy will be lost. Change whether show each link array element as individual objects - Change whether show each link array element as individual objects + Зменіць, ці паказваць кожны элемент артаганальная сеткі як асобныя аб'екты Transform at the origin of the placement - Transform at the origin of the placement + Пераўтварыць размяшчэнне ў пачатку каардынат Override colors... - Override colors... + Пераназначыць колеры... @@ -9542,12 +9544,12 @@ the current copy will be lost. Not allowed: - Not allowed: + Не дазволена: Selection not allowed by filter - Selection not allowed by filter + Выбар, які не дазволены фільтрам @@ -9557,7 +9559,7 @@ the current copy will be lost. Box element selection - Box element selection + Вобласць выбару элементаў @@ -9567,7 +9569,7 @@ the current copy will be lost. Box selection - Box selection + Вылучыць вобласць @@ -9575,7 +9577,7 @@ the current copy will be lost. &About %1 - &About %1 + &Аб %1 @@ -9589,13 +9591,13 @@ the current copy will be lost. About &Qt - About &Qt + Аб &Qt About Qt - About Qt + Аб Qt @@ -9603,13 +9605,13 @@ the current copy will be lost. Ne&xt - Ne&xt + &Наступны Activate next window - Activate next window + Задзейнічаць наступнае акно @@ -9617,13 +9619,13 @@ the current copy will be lost. Pre&vious - Pre&vious + &Папярэдні Activate previous window - Activate previous window + Задзейнічаць папярэдняе акно @@ -9631,13 +9633,13 @@ the current copy will be lost. Alignment... - Alignment... + Выраўноўванне... Align the selected objects - Align the selected objects + Выраўнаваць абраныя аб'екты @@ -9647,7 +9649,7 @@ the current copy will be lost. Toggle axis cross - Toggle axis cross + Пераключыць бачнасць восей каардынат @@ -9655,13 +9657,13 @@ the current copy will be lost. &Cascade - &Cascade + &Каскадам Tile pragmatic - Tile pragmatic + Размясціць вокны каскадам @@ -9697,13 +9699,13 @@ the current copy will be lost. Start command &line... - Start command &line... + Запусціць камандны &радок... Opens the command line in the console - Opens the command line in the console + Адчыняе камандны радок у кансолі @@ -9711,13 +9713,13 @@ the current copy will be lost. C&opy - C&opy + &Капіраваць Copy operation - Copy operation + Аперацыя капіравання @@ -9725,13 +9727,13 @@ the current copy will be lost. &Cut - &Cut + &Выразаць Cut out - Cut out + Аперацыя выразання @@ -9739,13 +9741,13 @@ the current copy will be lost. &Delete - &Delete + &Выдаліць Deletes the selected objects - Deletes the selected objects + Выдаляе абраныя аб'екты @@ -9753,13 +9755,13 @@ the current copy will be lost. View turntable... - View turntable... + Паваротны выгляд... View turntable - View turntable + Паваротны выгляд @@ -9767,13 +9769,13 @@ the current copy will be lost. Dependency graph... - Dependency graph... + Граф залежнасці... Show the dependency graph of the objects in the active document - Show the dependency graph of the objects in the active document + Паказвае граф залежнасці аб'ектаў у бягучым дакуменце @@ -9781,13 +9783,13 @@ the current copy will be lost. Cu&stomize... - Cu&stomize... + &Наладзіць... Customize toolbars and command bars - Customize toolbars and command bars + Наладжвае панэль інструментаў і панэль камандаў @@ -9795,13 +9797,13 @@ the current copy will be lost. Macros ... - Macros ... + Макрас ... Opens a dialog to let you execute a recorded macro - Opens a dialog to let you execute a recorded macro + Адчыняе дыялогавае акно, якое дазваляе выканаць раней запісаны макрас @@ -9815,7 +9817,7 @@ the current copy will be lost. Execute the macro in the editor - Execute the macro in the editor + Выканаць макрас у рэдактары @@ -9823,13 +9825,13 @@ the current copy will be lost. &Macro recording ... - &Macro recording ... + &Запісаць макрас... Opens a dialog to record a macro - Opens a dialog to record a macro + Адчыняе дыялогавае акно для запісу макраса @@ -9837,13 +9839,13 @@ the current copy will be lost. E&dit parameters ... - E&dit parameters ... + &Змяніць налады... Opens a Dialog to edit the parameters - Opens a Dialog to edit the parameters + Адчыняе дыялогавае акно для змены налад @@ -9851,13 +9853,13 @@ the current copy will be lost. &Preferences ... - &Preferences ... + &Перавагі... Opens a Dialog to edit the preferences - Opens a Dialog to edit the preferences + Адчыняе дыялогавае акно для змены пераваг @@ -9871,7 +9873,7 @@ the current copy will be lost. List of available dock panels - List of available dock panels + Спіс даступных замацаваных панэляў @@ -9879,13 +9881,13 @@ the current copy will be lost. Draw style - Draw style + Стыль прадстаўлення Change the draw style of the objects - Change the draw style of the objects + Змяняе стыль прадстаўлення аб'ектаў @@ -9893,13 +9895,13 @@ the current copy will be lost. Duplicate selection - Duplicate selection + Паўтарыць выбар Put duplicates of the selected objects to the active document - Put duplicates of the selected objects to the active document + Размяшчае паўторны выбар аб'ектаў у бягучы дакумент @@ -9907,17 +9909,17 @@ the current copy will be lost. Toggle &Edit mode - Toggle &Edit mode + Пераключыць рэжым &змены Toggles the selected object's edit mode - Toggles the selected object's edit mode + Пераключае абраныя аб'екты ў рэжым змены Activates or Deactivates the selected object's edit mode - Activates or Deactivates the selected object's edit mode + Уключае ці адключае рэжым змены абраных аб'ектаў @@ -9925,13 +9927,13 @@ the current copy will be lost. &Export... - &Export... + &Экспартаваць... Export an object in the active document - Export an object in the active document + Экспартуе аб'ект у бягучы дакумент @@ -9941,7 +9943,7 @@ the current copy will be lost. Select the objects to export before choosing Export. - Select the objects to export before choosing Export. + Абярыце аб'екты для экспартавання, перш чым абраць каманду Экспартавання. @@ -9951,7 +9953,7 @@ the current copy will be lost. Expression actions - Expression actions + Дзеянні з выразам @@ -9959,13 +9961,13 @@ the current copy will be lost. &Recompute - &Recompute + &Пералічыць Recompute feature or document - Recompute feature or document + Пералічае элементы ці дакументы @@ -9973,12 +9975,12 @@ the current copy will be lost. Donate - Donate + Ахвяраваць Donate to FreeCAD development - Donate to FreeCAD development + Ахвяраваць на падтрымку FreeCAD @@ -9986,17 +9988,17 @@ the current copy will be lost. FreeCAD FAQ - FreeCAD FAQ + Частыя пытанні FreeCAD Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Пытанні, якія часта задаюць на інтэрнэт-сайце FreeCAD Frequently Asked Questions - Frequently Asked Questions + Частыя пытанні @@ -10004,17 +10006,17 @@ the current copy will be lost. FreeCAD Forum - FreeCAD Forum + Форум FreeCAD The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + Форум FreeCAD, дзе вы можаце знайсці дапамогу ад іншых карыстальнікаў The FreeCAD Forum - The FreeCAD Forum + Форум FreeCAD @@ -10022,17 +10024,17 @@ the current copy will be lost. Python scripting documentation - Python scripting documentation + Дакументацыя па стварэнню сцэнараў на Python Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Дакументацыя па напісанню сцэнараў на Python на інтэрнэт-сайце FreeCAD PowerUsers documentation - PowerUsers documentation + Дакументацыя для прасунутых карыстальнікаў @@ -10041,12 +10043,12 @@ the current copy will be lost. Users documentation - Users documentation + Карыстальніцкая дакументацыя Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Дакументацыя для карыстальнікаў на інтэрнэт-сайце FreeCAD @@ -10055,12 +10057,12 @@ the current copy will be lost. FreeCAD Website - FreeCAD Website + Інтэрнэт-сайт FreeCAD The FreeCAD website - The FreeCAD website + Інтэрнэт-сайт FreeCAD @@ -10068,13 +10070,13 @@ the current copy will be lost. Freeze display - Freeze display + Запомніць выгляд Freezes the current view position - Freezes the current view position + Запомніць бягучае становішча выгляду @@ -10082,12 +10084,12 @@ the current copy will be lost. Create group - Create group + Стварыць суполку Create a new group for ordering objects - Create a new group for ordering objects + Стварыць новую суполка для ўпарадкаваных аб'ектаў @@ -10095,13 +10097,13 @@ the current copy will be lost. Hide all objects - Hide all objects + Схаваць усе аб'екты Hide all objects in the document - Hide all objects in the document + Хавае ўсе аб'екты ў дакуменце @@ -10109,13 +10111,13 @@ the current copy will be lost. Hide selection - Hide selection + Схаваць абранае Hide all selected objects - Hide all selected objects + Хавае ўсе абраныя аб'екты @@ -10123,13 +10125,13 @@ the current copy will be lost. &Import... - &Import... + &Імпартаваць... Import a file in the active document - Import a file in the active document + Імпартуе файл у бягучы дакумент @@ -10162,7 +10164,7 @@ the current copy will be lost. Import selected external link(s) - Import selected external link(s) + Імпартуе абраныя вонкавыя сувязі @@ -10175,7 +10177,7 @@ the current copy will be lost. Import all links of the active document - Import all links of the active document + Імпартуе ўсе сувязі бягучага дакумента @@ -10188,7 +10190,7 @@ the current copy will be lost. Create a link to the selected object(s) - Create a link to the selected object(s) + Стварае сувязі на абраныя аб'екты @@ -10227,7 +10229,7 @@ the current copy will be lost. Replace the selected object(s) with link - Replace the selected object(s) with link + Замяняе абраныя аб'екты на сувязі @@ -10414,7 +10416,7 @@ the current copy will be lost. %1 document (*.FCStd) - %1 document (*.FCStd) + Дакумент %1 (*.FCStd) @@ -10462,12 +10464,12 @@ the current copy will be lost. Help Website - Help Website + Інтэрнэт-сайт дапамогі The website where the help is maintained - The website where the help is maintained + Інтэрнэт-сайт, на якім знаходзіцца дапамога @@ -10625,12 +10627,12 @@ the current copy will be lost. Python Website - Python Website + Інтэрнэт-сайт Python The official Python website - The official Python website + Афіцыйны інтэрнэт-сайт Python @@ -10830,13 +10832,13 @@ the current copy will be lost. &Bounding box - &Bounding box + &Габарыты Show selection bounding box - Show selection bounding box + Паказаць габарыты абранага @@ -10970,13 +10972,13 @@ the current copy will be lost. Texture mapping... - Texture mapping... + Супастаўленне тэкстуры... Texture mapping - Адлюстраванне тэкстуры + Супастаўленне тэкстуры @@ -11000,7 +11002,7 @@ the current copy will be lost. Toggle breakpoint - Toggle breakpoint + Пераключыць кропку прыпынку @@ -11008,13 +11010,13 @@ the current copy will be lost. Clipping plane - Clipping plane + Плоскасць перасеку Toggles clipping plane for active view - Toggles clipping plane for active view + Пераключыць плоскасць перасеку для бягучага выгляду @@ -11022,13 +11024,13 @@ the current copy will be lost. Toggle navigation/Edit mode - Toggle navigation/Edit mode + Пераключыць навігацыю/рэжым змены Toggle between navigation and edit mode - Toggle between navigation and edit mode + Пераключае паміж навігацыяй і рэжымам змены @@ -11036,13 +11038,13 @@ the current copy will be lost. Toggle all objects - Toggle all objects + Пераключыць усе аб'екты Toggles visibility of all objects in the active document - Toggles visibility of all objects in the active document + Пераключае бачнасць усіх аб'ектаў у бягучым дакуменце @@ -11056,7 +11058,7 @@ the current copy will be lost. Toggles the property of the objects to get selected in the 3D-View - Toggles the property of the objects to get selected in the 3D-View + Пераключае ўласцівасць аб'ектаў, якія будуць абраныя ў трохмерным прадстаўленні @@ -11070,7 +11072,7 @@ the current copy will be lost. Toggles visibility - Toggles visibility + Пераключае бачнасць @@ -11084,7 +11086,7 @@ the current copy will be lost. Toggles this window - Toggles this window + Пераключае бачнасць гэтага акна @@ -11112,7 +11114,7 @@ the current copy will be lost. Transform the selected object in the 3d view - Transform the selected object in the 3d view + Пераўтварае абраны аб'ект у трохмерным прадстаўленні @@ -11280,7 +11282,7 @@ the current copy will be lost. Shows a 3D texture with manipulator - Shows a 3D texture with manipulator + Паказвае трохмерную тэкстуру з дапамогай маніпулятара @@ -11602,7 +11604,7 @@ the current copy will be lost. Extend the FreeCAD 3D Window to a Oculus Rift - Extend the FreeCAD 3D Window to a Oculus Rift + Пашырае трохмернае акно FreeCAD у Oculus Rift @@ -11640,7 +11642,7 @@ the current copy will be lost. Activates this window - Activates this window + Задзейнічаць гэтае акно @@ -11778,7 +11780,7 @@ the current copy will be lost. Preselect the object in 3D view when mouse over the tree item - Папярэдне абраць аб'ект у трохмерным выглядзе, калі паказальнік мышы наведзены на элемент дрэва + Папярэдне абраць аб'ект у трохмерным прадстаўленні, калі паказальнік мышы наведзены на элемент дрэва @@ -11845,7 +11847,7 @@ the current copy will be lost. Auto expand tree item when the corresponding object is selected in 3D view - Аўтаматычнае разгортванне элемента дрэва, калі абраны адпаведны аб'ект у трохмерным выглядзе + Аўтаматычнае разгортванне элемента дрэва, калі абраны адпаведны аб'ект у трохмерным прадстаўленні @@ -11858,7 +11860,7 @@ the current copy will be lost. Auto switch to the 3D view containing the selected item - Аўтаматычнае пераключэнне на трохмерны выгляд, які змяшчае абраны элемент + Аўтаматычнае пераключэнне на трохмернае прадстаўленне, якое змяшчае абраны элемент @@ -12152,12 +12154,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Ізаметрычны - + Set NaviCube to Isometric mode Set NaviCube to Isometric mode @@ -12165,12 +12167,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Orthographic - + Set View to Orthographic mode Set View to Orthographic mode @@ -12178,12 +12180,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspective - + Set View to Perspective mode Set View to Perspective mode @@ -12191,12 +12193,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom to fit - + Zoom so that model fills the view Zoom so that model fills the view diff --git a/src/Gui/Language/FreeCAD_ca.qm b/src/Gui/Language/FreeCAD_ca.qm index 8292e1d40d..22aec45ad3 100644 Binary files a/src/Gui/Language/FreeCAD_ca.qm and b/src/Gui/Language/FreeCAD_ca.qm differ diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 5a0813eac1..56ee3a94b6 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -682,7 +682,7 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of - FreeCAD no seria possible sense les contribucions de + El FreeCAD no seria possible sense les contribucions de @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Paràmetres de la càmera - + Orientation Orientació - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -1036,7 +1036,7 @@ Si no està activat, la propietat ha de tenir un nom únic, i s'accedeix a ella TextLabel - Etiqueta de Text + Etiqueta de text @@ -1285,7 +1285,7 @@ same time. The one with the highest priority will be triggered. Shortcut priority list: - Shortcut priority list: + Llista de prioritats de les dreceres: @@ -1465,7 +1465,7 @@ same time. The one with the highest priority will be triggered. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Nota:</span> Els canvis s'activaran la propera vegada que carregueu el banc de treball apropiat</p></body></html> @@ -1582,7 +1582,7 @@ same time. The one with the highest priority will be triggered. Print Reference - Imprimeix les referències + Imprimeix la referència @@ -1630,7 +1630,7 @@ same time. The one with the highest priority will be triggered. Point color: - Point color: + Color del punt: @@ -1790,7 +1790,7 @@ same time. The one with the highest priority will be triggered. Code lines will be numbered - Les línies de codi seran numerades + Les línies de codi es numeraran @@ -1951,15 +1951,12 @@ same time. The one with the highest priority will be triggered. will be substituted with locale separator, except in Python Console and Macro Editor where a dot/period will always be printed. - If enabled, numerical keypad decimal separator -will be substituted with locale separator, except -in Python Console and Macro Editor where a -dot/period will always be printed. + Si s'habilita, el separador decimal numèric del teclat numèric se substituirà amb el separador local, excepte a la consola Python i a l'editor de macros en què sempre s'imprimirà un punt/període. Substitute decimal separator (numpad) - Substitute decimal separator (numpad) + Substitueix el separador decimal (teclat numèric) @@ -1979,12 +1976,12 @@ dot/period will always be printed. Load - Load + Carrega Import config... - Import config... + Importa la configuració... @@ -1994,12 +1991,12 @@ dot/period will always be printed. Manage... - Administrar... + Administra... Revert... - Desfer... + Desfes... @@ -2014,7 +2011,7 @@ dot/period will always be printed. How many files should be listed in recent files list - Indica la quantitat de fitxers s’han d’enumerar en la llista de fitxers recents + Indica la quantitat de fitxers que s’han d’enumerar en la llista de fitxers recents @@ -2081,7 +2078,7 @@ això segons la mida de la pantalla o el gust personal Workbench selector position : - Workbench selector position : + Posició del selector del banc de treball: @@ -2090,11 +2087,11 @@ això segons la mida de la pantalla o el gust personal 'Toolbar': In the toolbars, as a movable toolbar. 'Left Corner': In the menu bar, on the left corner. 'Right Corner': In the menu bar, on the right corner. - Customize where the workbench selector appears (restart required). + Personalitza on apareix el selector del banc de treball (cal reiniciar). -'Toolbar': In the toolbars, as a movable toolbar. -'Left Corner': In the menu bar, on the left corner. -'Right Corner': In the menu bar, on the right corner. +«Barra d'eines»: a les barres d'eines, com una barra d'eines mòbil. +«Cantonada esquerra»: a la barra de menús, a la cantonada esquerra. +«Cantonada dreta»: a la barra de menús, a la cantonada dreta. @@ -2202,12 +2199,12 @@ quan arrenca FreeCAD. Si aquesta opció està marcada, FreeCAD en mostrarà una< Choose a FreeCAD config file to import - Choose a FreeCAD config file to import + Trieu un fitxer de configuració del FreeCAD per importar File exists - File exists + El fitxer ja existeix @@ -2535,7 +2532,7 @@ Potser per un error de permisos del fitxer? Specify first a place to save. - Especifiqueu en primer lloc una ubicació on desar. + Especifiqueu primer un lloc per desar. @@ -2678,7 +2675,7 @@ Specify another directory, please. Save to disk - Guarda al disc + Desa al disc @@ -2815,9 +2812,7 @@ Specify another directory, please. User-Saved Preference Packs - Catalán - -Paquets de preferències guardats per l'usuari + Paquets de preferències desats per l'usuari @@ -2960,7 +2955,7 @@ Paquets de preferències guardats per l'usuari &Comment: - &Comment: + &Comentari: @@ -3308,7 +3303,7 @@ de la consola Python al tauler de Vista d'informes TextLabel - Etiqueta de Text + Etiqueta de text @@ -3712,12 +3707,12 @@ mida de la caixa contenidora de l'objecte 3D que es mostra actualment. Daily - Daily + Diàriament Weekly - Weekly + Setmanalment @@ -3732,7 +3727,7 @@ mida de la caixa contenidora de l'objecte 3D que es mostra actualment. Never - Never + Mai @@ -3952,7 +3947,7 @@ a més de la barra de colors Document save compression level (0 = none, 9 = highest, 3 = default) - Nivell de compressió per a guardar el document + Nivell de compressió per a desar el document (0 = cap, 9 = el més alt, 3 = per defecte) @@ -4000,12 +3995,12 @@ Aquesta característica pot augmentar lleugerament el temps de recàlcul. Saving transactions (Auto-save) - S'estan desantt les transaccions (desat automàtic) + S'estan desant les operacions (desament automàtic) Discard saved transaction after saving document - Descarta les transaccions desades després de desar el document + Descarta les operacions desades després de desar el document @@ -4172,62 +4167,77 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> La llicència per defecte per als documents nous - + All rights reserved Tots els drets reservats - + Creative Commons Attribution Creative Commons Reconeixement - + Creative Commons Attribution-ShareAlike Creative Commons Reconeixement-CompartirIgual - + Creative Commons Attribution-NoDerivatives Creative Commons Reconeixement-SenseObraDerivada - + Creative Commons Attribution-NonCommercial Creative Commons Reconeixement-NoComercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Reconeixement-NoComercial-CompartirIgual - + Creative Commons Attribution-NonCommercial-NoDerivatives Llicència Creative Commons Reconeixement-NoComercial-SenseObraDerivada - + Public Domain Domini públic - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Altres - + License URL URL de la llicència - + URL describing more about the license URL que descriu més informació sobre la llicència @@ -4235,17 +4245,17 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. El format de la data que s'ha d'utilitzar. - + Default Per defecte - + Format Format @@ -4729,7 +4739,6 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> - Corner where navigation cube is shown Cantonada on es mostra el cub de navegació @@ -4766,7 +4775,12 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Font name: - Font name: + Nom del tipus de lletra: + + + + Font name of the navigation cube + Font name of the navigation cube @@ -4781,12 +4795,12 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Font size: - Font size: + Mida del tipus de lletra: - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4948,52 +4962,52 @@ Mouse tilting is not disabled by this setting. Desactiva el gest d'inclinació de la pantalla tàctil - + Isometric Isomètrica - + Dimetric Dimètric - + Trimetric Trimètric - + Top Planta - + Front Alçat - + Left Esquerra - + Right Dreta - + Rear Posterior - + Bottom Inferior - + Custom Personalitzat @@ -5170,7 +5184,7 @@ horizontal space in Python console FEM (mm, N, s) - FEM (mm, N, s) + FEM (mm, N, s) @@ -5244,12 +5258,12 @@ horizontal space in Python console Switches the colors of the gradient - Switches the colors of the gradient + Canvia els colors del degradat Switch - Switch + Canvia @@ -5400,12 +5414,12 @@ El sistema de preferències és el fixat en les preferències generals. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unitat desconeguda: - + unit mismatch la unitat no coincideix @@ -5486,7 +5500,7 @@ El sistema de preferències és el fixat en les preferències generals. <html><head/><body><p><span style=" font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> - <html><head/><body><p><span style=" font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> + <html><head/><body><p><span style=" font-size:8pt; font-weight:600;">Nota:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> Els canvis s'activaran la propera vegada que inicieu l'aplicació</span></p></body></html> @@ -5791,7 +5805,7 @@ La columna 'Estat' mostra si el document es pot recuperar. Panning: - Panning: + Panoràmica: @@ -5994,7 +6008,7 @@ La columna 'Estat' mostra si el document es pot recuperar. Apply axial - Aplicar axial + Aplica axial @@ -6009,7 +6023,7 @@ La columna 'Estat' mostra si el document es pot recuperar. Selected points - Punts escollits + Punts seleccionats @@ -6277,7 +6291,7 @@ La columna 'Estat' mostra si el document es pot recuperar. Show dependencies - Show dependencies + Mostra les dependències @@ -6314,7 +6328,7 @@ La columna 'Estat' mostra si el document es pot recuperar. &Use Original Selections - &Usar les seleccions originals + &Utilitza les seleccions originals @@ -6408,7 +6422,7 @@ seleccionats abans d'obrir aquest diàleg Show Report view on - Show Report view on + Mostra la vista de l'informe a @@ -7286,7 +7300,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Canvia l'objecte enllaçat @@ -7294,12 +7308,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Error - + Object not found No s'ha trobat l'objecte. @@ -7441,7 +7455,7 @@ Esteu segur que voleu sortir sense desar les dades? Save history as... - Anomena i guarda l'historial... + Anomena i desa l'historial... @@ -7481,7 +7495,7 @@ Esteu segur que voleu sortir sense desar les dades? Save History - Guarda l'historial + Desa l'historial @@ -7732,7 +7746,7 @@ Do you want to specify another directory? TextLabel - Etiqueta de Text + Etiqueta de text @@ -7858,7 +7872,7 @@ Do you want to specify another directory? Do you want to save your changes before closing? - Voleu guardar els canvis abans de tancar? + Voleu desar els canvis abans de tancar? @@ -7938,7 +7952,7 @@ Do you want to specify another directory? Belarusian - Belarusian + Belarús @@ -8058,7 +8072,7 @@ Do you want to specify another directory? Portuguese, Brazilian - Portuguès, brasiler + Portuguès, Brasil @@ -8083,7 +8097,7 @@ Do you want to specify another directory? Serbian, Latin - Serbian, Latin + Serbi, llatí @@ -8103,7 +8117,7 @@ Do you want to specify another directory? Spanish, Argentina - Espanyol, Argentí + Espanyol, Argentina @@ -8133,7 +8147,7 @@ Do you want to specify another directory? Georgian - Georgia + Georgià @@ -8342,22 +8356,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exporta a PDF - + PDF file Arxiu PDF - + Opening file failed No s'ha pogut obrir l'arxiu - + Can't open file '%1' for writing. No s'ha pogut obrir l'arxiu '%1' per escriure-hi. @@ -8626,7 +8640,7 @@ Do you want to specify another directory? Cannot save to unknown filetype: %1 - No es pot guardar el tipus de fitxer desconegut: %1 + No es pot desar el tipus de fitxer desconegut: %1 @@ -8658,12 +8672,12 @@ Do you want to specify another directory? There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - Hi hagué errors quan es carregava el fitxer. Algunes dades s'han pogut modificar o no s'han recuperat. Cerqueu a la vista d'informes per a obtindre informació més específica sobre els objectes implicats. + S'han produït errors en carregar el fitxer. Algunes dades es poden haver modificades o no s'han recuperat. Consulteu la vista d'informe per a obtenir informació més específica sobre els objectes implicats. There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - Hi ha hagut greus errors en carregar l'arxiu. Pot ser que s'hagin modificat dades o no s'hagin recuperat. Guardar el projecte molt probablement resulti en pèrdua de dades. + Hi ha hagut errors greus en carregar el fitxer. Pot ser que s'hagin modificat dades o no s'hagin recuperat. Desar el projecte probablement provocarà la pèrdua de dades. @@ -8777,7 +8791,7 @@ Be aware the point where you click matters. Save views... - Guarda les visualitzacions... + Desa les visualitzacions... @@ -8807,7 +8821,7 @@ Be aware the point where you click matters. Save frozen views - Guarda les visualitzacions congelades + Desa les visualitzacions congelades @@ -8845,7 +8859,7 @@ Do you want to continue? Save picture - Guarda la imatge + Desa la imatge @@ -8950,22 +8964,22 @@ Do you want to continue? Do you want to skip confirmation of further critical message notifications while loading the file? - Do you want to skip confirmation of further critical message notifications while loading the file? + Voleu ometre la confirmació de més missatges de notificacions crítiques mentre es carrega el fitxer? Critical Message - Critical Message + Missatge crític Too many message notifications. Notification temporarily stopped. Look at the report view for more information. - Too many message notifications. Notification temporarily stopped. Look at the report view for more information. + Massa notificacions de missatges. S'ha aturat temporalment la notificació. Consulteu la vista de l'informe per a més informació. Warning - Warning + Avís @@ -8975,7 +8989,7 @@ Do you want to continue? Critical - Critical + Crític @@ -9041,7 +9055,7 @@ Voleu desar-lo amb un nom diferent? Saving aborted - S'avorta el procés de guardar. + S'ha interromput el desament @@ -9057,7 +9071,7 @@ Voleu desar-lo amb un nom diferent? Saving document failed - No s'ha pogut guardar el document. + No s'ha pogut desar el document @@ -9143,7 +9157,7 @@ Trieu «Interromp» per a interrompre Save Macro - Guarda la macro + Desa la macro @@ -9213,12 +9227,12 @@ Please open a browser window and type in: http://localhost:%1. Opcions... - + Out of memory No hi ha prou memòria. - + Not enough memory available to display the data. No hi ha prou memòria disponible per a mostrar les dades. @@ -9257,7 +9271,7 @@ Please open a browser window and type in: http://localhost:%1. Do you want to save your changes to document '%1' before closing? - Voleu guardar els vostres canvis en el document '%1' abans de tancar? + Voleu desar els canvis en el document '%1' abans de tancar? @@ -10036,12 +10050,12 @@ la còpia actual es perdrà. FreeCAD Website - LLoc web del FreeCAD + Lloc web del FreeCAD The FreeCAD website - El lLoc web del FreeCAD + El lloc web del FreeCAD @@ -10611,7 +10625,7 @@ la còpia actual es perdrà. The official Python website - El llloc web oficial del Python + El lloc web oficial del Python @@ -10733,7 +10747,7 @@ la còpia actual es perdrà. Save the active document - Guarda el document actiu + Desa el document actiu @@ -10755,7 +10769,7 @@ la còpia actual es perdrà. Save &As... - &Anomena i guarda... + &Anomena i desa... @@ -10769,7 +10783,7 @@ la còpia actual es perdrà. Save a &Copy... - Guarda una &còpia... + Desa una &còpia... @@ -11699,7 +11713,7 @@ la còpia actual es perdrà. Store working view - Store working view + Desa la vista de treball @@ -11746,7 +11760,7 @@ la còpia actual es perdrà. Display all documents in the tree view - Mostrar tots els documents en la vista d'arbre + Mostra tots els documents en la vista d'arbre @@ -11899,7 +11913,7 @@ la còpia actual es perdrà. Save picture... - Guarda la imatge... + Desa la imatge... @@ -12089,7 +12103,7 @@ Encara voleu continuar? This will discard all the changes since last file save. - Això descartarà tots els canvis des de l'última acció de guardar el fitxer. + Això descartarà tots els canvis des de l'última acció de desar el fitxer. @@ -12127,18 +12141,18 @@ Encara voleu continuar? Allow tree view columns to be manually resized. - Allow tree view columns to be manually resized. + Permet redimensionar manualment les columnes de la vista en arbre. ViewIsometricCmd - + Isometric Isomètrica - + Set NaviCube to Isometric mode Estableix NaviCube en el mode isomètric @@ -12146,12 +12160,12 @@ Encara voleu continuar? ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Estableix la visualització al mode ortogonal @@ -12159,12 +12173,12 @@ Encara voleu continuar? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Defineix la visualització en mode de perspectiva @@ -12172,12 +12186,12 @@ Encara voleu continuar? ViewZoomToFitCmd - + Zoom to fit Zoom per a encabir - + Zoom so that model fills the view Zoom perquè el model ompli la visualització diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index 1cbe36d5fe..853aec9508 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index fca8281fda..a2b52a6d35 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Nastavení kamery - + Orientation Orientace - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuální pohled @@ -4168,62 +4168,77 @@ Můžete také použít tuto formu: John Doe <john@doe.com> Výchozí licence pro nové dokumenty - + All rights reserved Všechna práva vyhrazena - + Creative Commons Attribution Creative Commons - Uveď autora - + Creative Commons Attribution-ShareAlike Creative Commons Uveď autora-Zachovej licenci - + Creative Commons Attribution-NoDerivatives Creative Commons Uveď autora-Nezasahuj do díla - + Creative Commons Attribution-NonCommercial Creative Commons Uveď autora-Neužívej dílo komerčně - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Uveď autora-Neužívej dílo komerčně-Nezasahuj do díla - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Uveď autora-Neužívej dílo komerčně-Nezasahuj do díla - + Public Domain Veřejná doména - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Jiný - + License URL URL licence - + URL describing more about the license URL adresa popisující více o licenci @@ -4231,17 +4246,17 @@ Můžete také použít tuto formu: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Formát data, který má být použit. - + Default Výchozí - + Format Formát @@ -4725,7 +4740,6 @@ Můžete také použít tuto formu: John Doe <john@doe.com> - Corner where navigation cube is shown Roh, ve kterém je zobrazena navigační krychle @@ -4764,6 +4778,11 @@ Můžete také použít tuto formu: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4781,8 +4800,8 @@ Můžete také použít tuto formu: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4946,52 +4965,52 @@ Naklánění myší není v tomto nastavení zakázáno. Zakázat dotykové gesto naklánění - + Isometric Izometrie - + Dimetric Dimetrie - + Trimetric Trimetrie - + Top Horní - + Front Přední - + Left Vlevo - + Right Vpravo - + Rear Zadní - + Bottom Dole - + Custom Vlastní @@ -5399,12 +5418,12 @@ Systém preferencí je systém nastavený v obecných preferencích. Gui::Dialog::DlgUnitsCalculator - + unknown unit: neznámá jednotka: - + unit mismatch neshoda jednotek @@ -7290,7 +7309,7 @@ V pravém pohledu jsou %2 body vybrány. Gui::PropertyEditor::LinkLabel - + Change the linked object Změnit propojený objekt @@ -7298,12 +7317,12 @@ V pravém pohledu jsou %2 body vybrány. Gui::PropertyEditor::LinkSelection - + Error Chyba - + Object not found Objekt nenalezen @@ -8346,22 +8365,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Export PDF - + PDF file PDF soubor - + Opening file failed Otevření souboru selhalo - + Can't open file '%1' for writing. Soubor "%1" nelze otevřít pro zápis. @@ -9221,12 +9240,12 @@ Prosím, otevřete okno prohlížeče a zadejte: http://localhost:%1.Možnosti... - + Out of memory Nedostatek paměti - + Not enough memory available to display the data. Není dostatek paměti pro zobrazení dat. @@ -12143,12 +12162,12 @@ Chcete pokračovat? ViewIsometricCmd - + Isometric Izometrie - + Set NaviCube to Isometric mode Nastavit Navigační Kostku do izometrického módu @@ -12156,12 +12175,12 @@ Chcete pokračovat? ViewOrthographicCmd - + Orthographic Pravoúhlé - + Set View to Orthographic mode Nastavit pravoúhlé zobrazení @@ -12169,12 +12188,12 @@ Chcete pokračovat? ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Nastavit perspektivní zobrazení @@ -12182,12 +12201,12 @@ Chcete pokračovat? ViewZoomToFitCmd - + Zoom to fit Zoom na vše - + Zoom so that model fills the view Přiblížit tak, že model vyplní zobrazení diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index 2a6fee88ef..2440678845 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index 13cef6c399..08247b6598 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kameraeinstellungen - + Orientation Orientierung - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuelle Ansicht @@ -4159,62 +4159,77 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com>Standard-Lizenz für neue Dokumente - + All rights reserved Alle Rechte vorbehalten - + Creative Commons Attribution Creative Commons Namensnennung - + Creative Commons Attribution-ShareAlike Creative Commons Namensnennung-Weitergabe unter gleichen Bedingungen - + Creative Commons Attribution-NoDerivatives Creative Commons Namensnennung-Keine Bearbeitung - + Creative Commons Attribution-NonCommercial Creative Commons Namensnennung-Nicht kommerziell - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Namensnennung-NichtKommerziell-KeineBearbeitung - + Public Domain Public Domain - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Andere - + License URL Lizenz-URL - + URL describing more about the license URL, die mehr über die Lizenz beschreibt @@ -4222,17 +4237,17 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Das Format des zu verwendenden Datums. - + Default Standard - + Format Format @@ -4716,7 +4731,6 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com> - Corner where navigation cube is shown Ecke, in welcher der Navigationswürfel angezeigt wird @@ -4755,6 +4769,11 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com>Font name: Schriftname: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4772,8 +4791,8 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Schrifthöhe für die Beschriftung des Navigationswürfels</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4937,52 +4956,52 @@ Das Neigen der Maus wird durch diese Einstellung nicht deaktiviert.Deaktiviere die Touchscreen Neige-Geste - + Isometric Isometrisch - + Dimetric Dimetrisch - + Trimetric Trimetrisch - + Top Oben - + Front Vorne - + Left Links - + Right Rechts - + Rear Hinten - + Bottom Unten - + Custom Benutzerdefiniert @@ -5390,12 +5409,12 @@ Das Präferenzsystem ist das in den allgemeinen Einstellungen festgelegte System Gui::Dialog::DlgUnitsCalculator - + unknown unit: unbekannte Einheit: - + unit mismatch Einheit stimmt nicht überein @@ -7279,7 +7298,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Verknüpftes Objekt ändern @@ -7287,12 +7306,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Fehlermeldungen - + Object not found Objekt nicht gefunden @@ -8339,22 +8358,22 @@ Möchten Sie ein anderes Verzeichnis angeben? Gui::View3DInventor - + Export PDF PDF exportieren - + PDF file PDF-Datei - + Opening file failed Fehler beim Öffnen der Datei - + Can't open file '%1' for writing. Datei '%1' kann zum Schreiben nicht geöffnet werden. @@ -9215,12 +9234,12 @@ Bitte starten Sie einen Browser und geben darin ein: http://localhost:%1.Einstellungen... - + Out of memory Nicht genügend Speicher - + Not enough memory available to display the data. Nicht genügend Speicher verfügbar, um die Daten darstellen zu können. @@ -12134,12 +12153,12 @@ Möchten Sie trotzdem fortfahren? ViewIsometricCmd - + Isometric Isometrisch - + Set NaviCube to Isometric mode Setze NaviCube in den isometrische Modus @@ -12147,12 +12166,12 @@ Möchten Sie trotzdem fortfahren? ViewOrthographicCmd - + Orthographic Orthogonal - + Set View to Orthographic mode Setze die Ansicht auf den orthogonalen Modus @@ -12160,12 +12179,12 @@ Möchten Sie trotzdem fortfahren? ViewPerspectiveCmd - + Perspective Perspektive - + Set View to Perspective mode Setze Ansicht auf perspektivische Darstellung @@ -12173,12 +12192,12 @@ Möchten Sie trotzdem fortfahren? ViewZoomToFitCmd - + Zoom to fit Bild an Fenster anpassen - + Zoom so that model fills the view Ansicht auf Modellgrenzen einstellen diff --git a/src/Gui/Language/FreeCAD_el.qm b/src/Gui/Language/FreeCAD_el.qm index 7fa4dc848a..cdf472fdb7 100644 Binary files a/src/Gui/Language/FreeCAD_el.qm and b/src/Gui/Language/FreeCAD_el.qm differ diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index fcf0927889..06c22cc475 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Camera settings - + Orientation Προσανατολισμός - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Τωρινή προβολή @@ -4163,62 +4163,77 @@ You can also use the form: John Doe <john@doe.com> Default license for new documents - + All rights reserved Με επιφύλαξη παντός δικαιώματος - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Public Domain - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Άλλο - + License URL Διεύθυνση URL της άδειας - + URL describing more about the license URL describing more about the license @@ -4226,17 +4241,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Μορφή ημερομηνίας προς χρήση - + Default Προεπιλεγμένο - + Format Format @@ -4720,7 +4735,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Γωνία όπου εμφανίζεται ο κύβος πλοήγησης @@ -4759,6 +4773,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4776,8 +4795,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4941,52 +4960,52 @@ Mouse tilting is not disabled by this setting. Απενεργοποίηση της χειρονομίας πλαγιάσματος, από την οθόνη αφής - + Isometric Ισομετρική - + Dimetric Διμετρική - + Trimetric Τριμετρική - + Top Πάνω - + Front Εμπρόσθια - + Left Αριστερά - + Right Δεξιά - + Rear Οπίσθια - + Bottom Κάτω - + Custom Επιλογή @@ -5394,12 +5413,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: άγνωστη μονάδα: - + unit mismatch unit mismatch @@ -7286,7 +7305,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Αλλαγή του συνδεδεμένου αντικειμένου @@ -7294,12 +7313,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Σφάλμα - + Object not found Το αντικείμενο δεν βρέθηκε @@ -8345,22 +8364,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Εξαγωγή σε PDF - + PDF file Αρχείο PDF - + Opening file failed Αποτυχία ανοίγματος αρχείου - + Can't open file '%1' for writing. Αδυναμία ανοίγματος αρχείου '%1' για εγγραφή. @@ -9222,12 +9241,12 @@ Please open a browser window and type in: http://localhost:%1. Επιλογές... - + Out of memory Μνήμη πλήρης - + Not enough memory available to display the data. Δεν υπάρχει αρκετή μνήμη διαθέσιμη για την προβολή των δεδομένων. @@ -12142,12 +12161,12 @@ Do you still want to proceed; ViewIsometricCmd - + Isometric Ισομετρική - + Set NaviCube to Isometric mode Ορισμός του Κύβου Πλοήγησης (NaviCube) σε Ισομετρική κατάσταση λειτουργίας @@ -12155,12 +12174,12 @@ Do you still want to proceed; ViewOrthographicCmd - + Orthographic Ορθογραφική - + Set View to Orthographic mode Ορισμός της Προβολής σε Ορθογραφική κατάσταση λειτουργίας @@ -12168,12 +12187,12 @@ Do you still want to proceed; ViewPerspectiveCmd - + Perspective Προοπτική - + Set View to Perspective mode Ορισμός της Προβολής σε Προοπτική κατάσταση λειτουργίας @@ -12181,12 +12200,12 @@ Do you still want to proceed; ViewZoomToFitCmd - + Zoom to fit Εστίαση ώστε να χωρέσει - + Zoom so that model fills the view Εστίαση, έτσι, ώστε το μοντέλο να γεμίζει την περιοχή προβολής diff --git a/src/Gui/Language/FreeCAD_es-AR.qm b/src/Gui/Language/FreeCAD_es-AR.qm index 1ead201704..8797ec2fdb 100644 Binary files a/src/Gui/Language/FreeCAD_es-AR.qm and b/src/Gui/Language/FreeCAD_es-AR.qm differ diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts index 02ee2eb3a1..2c54a4b9ec 100644 --- a/src/Gui/Language/FreeCAD_es-AR.ts +++ b/src/Gui/Language/FreeCAD_es-AR.ts @@ -758,37 +758,37 @@ mientras hace un clic izquierdo o derecho y mueve el mouse hacia arriba o hacia Gui::Dialog::CameraDialog - + Camera settings Ajustes de cámara - + Orientation Orientación - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -4164,62 +4164,77 @@ También puede utilizar el formulario: John Doe <john@doe.com>Licencia predeterminada para documentos nuevos - + All rights reserved Todos los derechos reservados - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Dominio Público - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Otro - + License URL URL de la licencia - + URL describing more about the license URL que describe más sobre la licencia @@ -4227,17 +4242,17 @@ También puede utilizar el formulario: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. El formato de la fecha a utilizar. - + Default Predeterminado - + Format Formato @@ -4721,7 +4736,6 @@ También puede utilizar el formulario: John Doe <john@doe.com> - Corner where navigation cube is shown Esquina donde se muestra el cubo de navegación @@ -4760,6 +4774,11 @@ También puede utilizar el formulario: John Doe <john@doe.com>Font name: Nombre de fuente: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4777,8 +4796,8 @@ También puede utilizar el formulario: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Tamaño de fuente para el texto del NaviCube</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4940,52 +4959,52 @@ Mouse tilting is not disabled by this setting. Desactivar gesto de inclinación de la pantalla táctil - + Isometric Isométrica - + Dimetric Dimétrica - + Trimetric Trimétrica - + Top Superior - + Front Anterior - + Left Izquierda - + Right Derecha - + Rear Posterior - + Bottom Inferior - + Custom Personalizado @@ -5393,12 +5412,12 @@ El sistema de preferencias es el establecido en las preferencias generales. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unidad desconocida: - + unit mismatch unidad incompatible @@ -7280,7 +7299,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Cambiar el objeto vinculado @@ -7288,12 +7307,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Error - + Object not found Objeto no encontrado @@ -8340,22 +8359,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exportar a PDF - + PDF file Archivo PDF - + Opening file failed No se pudo abrir el archivo - + Can't open file '%1' for writing. No se puede abrir el archivo '%1' para escritura. @@ -9214,12 +9233,12 @@ Por favor abra una ventana del navegador y escriba en ella: http://localhost:%1. Opciones... - + Out of memory Memoria insuficiente - + Not enough memory available to display the data. Insuficiente memoria disponible para mostrar los datos. @@ -12135,12 +12154,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Establecer NaviCube en modo Isométrico @@ -12148,12 +12167,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Configurar vista a modo ortogonal @@ -12161,12 +12180,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Configurar Vista a Modo Perspectiva @@ -12174,12 +12193,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewZoomToFitCmd - + Zoom to fit Zoom hasta encajar - + Zoom so that model fills the view Zoom para que el modelo llene la vista diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm index 0fd585eaeb..af295f3681 100644 Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 490335aaaf..fafc84f873 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -758,37 +758,37 @@ mientras hace clic con el botón izquierdo o derecho y mueve el ratón hacia arr Gui::Dialog::CameraDialog - + Camera settings Ajustes de la cámara - + Orientation Orientación - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -4167,62 +4167,77 @@ También puede utilizar el formulario: John Doe <john@doe.com>Licencia predeterminada para nuevos documentos - + All rights reserved Todos los derechos reservados - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Dominio público - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Otros - + License URL URL de la licencia - + URL describing more about the license URL que describe más sobre la licencia @@ -4230,17 +4245,17 @@ También puede utilizar el formulario: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. El formato de la fecha a utilizar. - + Default Por defecto - + Format Formato @@ -4724,7 +4739,6 @@ También puede utilizar el formulario: John Doe <john@doe.com> - Corner where navigation cube is shown Esquina donde se muestra el cubo de navegación @@ -4763,6 +4777,11 @@ También puede utilizar el formulario: John Doe <john@doe.com>Font name: Nombre de fuente: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4780,8 +4799,8 @@ También puede utilizar el formulario: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Tamany de font per el text NaviCube</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4943,52 +4962,52 @@ Mouse tilting is not disabled by this setting. Desactivar el gesto de inclinación de la pantalla táctil - + Isometric Isométrica - + Dimetric Dimétrica - + Trimetric Trimétrica - + Top Planta - + Front Alzado - + Left Izquierda - + Right Derecha - + Rear Posterior - + Bottom Inferior - + Custom Personalizado @@ -5396,12 +5415,12 @@ El sistema de preferencias es el establecido en las preferencias generales. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unidad desconocida: - + unit mismatch unidad incompatible @@ -7283,7 +7302,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Cambiar el objeto vinculado @@ -7291,12 +7310,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Error - + Object not found Objeto no encontrado @@ -8343,22 +8362,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exportar en PDF - + PDF file Archivo PDF - + Opening file failed No se pudo abrir el archivo - + Can't open file '%1' for writing. No se puede abrir el archivo '%1' para escritura. @@ -9217,12 +9236,12 @@ Por favor abra una ventana del navegador y escriba en ella: http://localhost:%1. Opciones... - + Out of memory Memoria insuficiente - + Not enough memory available to display the data. Insuficiente memoria disponible para mostrar los datos. @@ -12138,12 +12157,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Configurar NaviCube al modo Isométrico @@ -12151,12 +12170,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Establecer Vista a modo Ortogonal @@ -12164,12 +12183,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Configurar Vista a modo Perspectiva @@ -12177,12 +12196,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewZoomToFitCmd - + Zoom to fit Zoom para ajustar - + Zoom so that model fills the view Zoom para que ese modelo llene la vista diff --git a/src/Gui/Language/FreeCAD_eu.qm b/src/Gui/Language/FreeCAD_eu.qm index 12ed3033a4..ab66bf5fb8 100644 Binary files a/src/Gui/Language/FreeCAD_eu.qm and b/src/Gui/Language/FreeCAD_eu.qm differ diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index 983966a92a..ce20e31138 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kameraren ezarpenak - + Orientation Orientazioa - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Uneko bista @@ -4172,62 +4172,77 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> Dokumentu berrietarako lizentzia lehenetsia - + All rights reserved Eskubide guztiak erreserbatuta - + Creative Commons Attribution Creative Commons Aitortu - + Creative Commons Attribution-ShareAlike Creative Commons Aitortu-PartekatuBerdin - + Creative Commons Attribution-NoDerivatives Creative Commons Aitortu-LanEratorririkGabe - + Creative Commons Attribution-NonCommercial Creative Commons Aitortu-EzKomertziala - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Aitortu-EzKomertziala-PartekatuBerdin - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Aitortu-EzKomertziala-LanEratorririkGabe - + Public Domain Jabetza Publikoa - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Beste bat - + License URL Lizentziaren URLa - + URL describing more about the license Lizentziari buruzko deskribapen luzeagoa duen URLa @@ -4235,17 +4250,17 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Erabiliko den data-formatua. - + Default Lehenetsia - + Format Formatua @@ -4729,7 +4744,6 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> - Corner where navigation cube is shown Nabigazio-kuboa erakutsiko den izkina @@ -4768,6 +4782,11 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> Font name: Letra-tipoaren izena: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4785,8 +4804,8 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4950,52 +4969,52 @@ Ezarpen honek ez du desgaitzen sagu bidezko inklinazioa. Desgaitu ukimen-pantailaren inklinazio keinua - + Isometric Isometrikoa - + Dimetric Dimetrikoa - + Trimetric Trimetrikoa - + Top Goikoa - + Front Aurrekoa - + Left Ezkerrekoa - + Right Eskuinekoa - + Rear Atzekoa - + Bottom Azpikoa - + Custom Pertsonalizatua @@ -5403,12 +5422,12 @@ Hobespen-sistema hobespen orokorretan ezarritakoa da. Gui::Dialog::DlgUnitsCalculator - + unknown unit: Unitate ezezaguna: - + unit mismatch unitateak ez datoz bat @@ -7295,7 +7314,7 @@ Nola jarraitu nahi duzu? Gui::PropertyEditor::LinkLabel - + Change the linked object Aldatu estekatutako objektua @@ -7303,12 +7322,12 @@ Nola jarraitu nahi duzu? Gui::PropertyEditor::LinkSelection - + Error Errorea - + Object not found Ez da objektua aurkitu @@ -8355,22 +8374,22 @@ Beste direktorio bat aukeratu nahi al duzu? Gui::View3DInventor - + Export PDF Esportatu PDFa - + PDF file PDF fitxategia - + Opening file failed Fitxategia irekitzeak huts egin du - + Can't open file '%1' for writing. Ezin da '%1' fitxategia ireki hura idazteko. @@ -9231,12 +9250,12 @@ Mesedez, ireki nabigatzaile-leiho bat eta idatzi: http://localhost:%1.Aukerak... - + Out of memory Memoria gutxiegi - + Not enough memory available to display the data. Ez dago nahiko memoriarik datuak bistaratzeko. @@ -12151,12 +12170,12 @@ Jarraitu nahi al duzu? ViewIsometricCmd - + Isometric Isometrikoa - + Set NaviCube to Isometric mode Ezarri nabigazio-kuboa modu isometrikoan @@ -12164,12 +12183,12 @@ Jarraitu nahi al duzu? ViewOrthographicCmd - + Orthographic Ortografikoa - + Set View to Orthographic mode Ezarri bista modu ortografikora @@ -12177,12 +12196,12 @@ Jarraitu nahi al duzu? ViewPerspectiveCmd - + Perspective Perspektiba - + Set View to Perspective mode Ezarri bista perspektibako modura @@ -12190,12 +12209,12 @@ Jarraitu nahi al duzu? ViewZoomToFitCmd - + Zoom to fit Zooma doitzeko - + Zoom so that model fills the view Egin zooma ereduak bista bete dezan diff --git a/src/Gui/Language/FreeCAD_fi.qm b/src/Gui/Language/FreeCAD_fi.qm index 24d5199ff2..808fb0a7b6 100644 Binary files a/src/Gui/Language/FreeCAD_fi.qm and b/src/Gui/Language/FreeCAD_fi.qm differ diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 450ecdb704..971dc8d1c9 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kameran asetukset - + Orientation Suunta - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Nykyinen Näkymä @@ -4173,62 +4173,77 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> Oletuslisenssi uusille asiakirjoille - + All rights reserved Kaikki oikeudet pidätetään - + Creative Commons Attribution CreativeCommons ominaisuudet - + Creative Commons Attribution-ShareAlike CreativeCommons ominaisuudet-JaaSamankaltaisia - + Creative Commons Attribution-NoDerivatives CreativeCommons ominaisuudet-EiJohdannaisia - + Creative Commons Attribution-NonCommercial CreativeCommons ominaisuudet-EiKaupallinen - + Creative Commons Attribution-NonCommercial-ShareAlike CreativeCommons ominaisuudet-EiKaupallinen-JaaSamankaltaisia - + Creative Commons Attribution-NonCommercial-NoDerivatives CreativeCommons ominaisuudet-EiKaupallinen-EiJohdannaisia - + Public Domain Public Domain - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Muu - + License URL Lisenssin URL-osoite - + URL describing more about the license URL-osoite, joka kuvaa lisenssiä tarkemmin @@ -4236,17 +4251,17 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Käytettävän päivämäärän muoto. - + Default Oletus - + Format Formaatti @@ -4730,7 +4745,6 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> - Corner where navigation cube is shown Kulma, jossa navigointikuutio näytetään @@ -4769,6 +4783,11 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> Font name: Fontin nimi: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4786,8 +4805,8 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>NaviCube-tekstin fonttikoko</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4951,52 +4970,52 @@ Hiiren kallistaminen ei ole pois käytöstä tällä asetuksella. Poista kosketusnäytön kallistusele käytöstä - + Isometric Isometrinen - + Dimetric Dimetrinen - + Trimetric Trimetrinen - + Top Yläpuoli - + Front Etupuoli - + Left Vasen - + Right Oikea - + Rear Takana - + Bottom Pohja - + Custom Mukautettu @@ -5404,12 +5423,12 @@ Oletussjärjestelmä on määritetty yleisissä asetuksissa. Gui::Dialog::DlgUnitsCalculator - + unknown unit: tuntematon yksikkö: - + unit mismatch yksikkö ei täsmää @@ -7293,7 +7312,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Vaihda linkitetty objekti @@ -7301,12 +7320,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Virhe - + Object not found Objektia ei löydy @@ -8352,22 +8371,22 @@ Haluatko valita toisen hakemiston? Gui::View3DInventor - + Export PDF Vie PDF - + PDF file PDF-tiedosto - + Opening file failed Tiedoston avaaminen epäonnistui - + Can't open file '%1' for writing. Tiedostoon ”%1” ei voida tallentaa. @@ -9226,12 +9245,12 @@ Please open a browser window and type in: http://localhost:%1. Asetukset... - + Out of memory Muisti loppui - + Not enough memory available to display the data. Muisti ei riitä tietojen näyttämiseen. @@ -12148,12 +12167,12 @@ Haluatko silti jatkaa? ViewIsometricCmd - + Isometric Isometrinen - + Set NaviCube to Isometric mode Aseta navigointikuutio isometriseen tilaan @@ -12161,12 +12180,12 @@ Haluatko silti jatkaa? ViewOrthographicCmd - + Orthographic Ortograafinen - + Set View to Orthographic mode Aseta näkymä Ortograafiseen tilaan @@ -12174,12 +12193,12 @@ Haluatko silti jatkaa? ViewPerspectiveCmd - + Perspective Perspektiivi - + Set View to Perspective mode Aseta näkymä perspektiiviseen tilaan @@ -12187,12 +12206,12 @@ Haluatko silti jatkaa? ViewZoomToFitCmd - + Zoom to fit Sovita ruutuun - + Zoom so that model fills the view Zoomaus niin, että malli täyttää näkymän diff --git a/src/Gui/Language/FreeCAD_fr.qm b/src/Gui/Language/FreeCAD_fr.qm index 1c9b58e1ae..ca9b7bf02b 100644 Binary files a/src/Gui/Language/FreeCAD_fr.qm and b/src/Gui/Language/FreeCAD_fr.qm differ diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index c2f636cde9..a4165a3e02 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Réglages de la caméra - + Orientation Orientation - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vue actuelle @@ -4161,62 +4161,77 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com>Licence par défaut pour les nouveaux documents - + All rights reserved Tous droits réservés - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives CreativeCommons Paternité-Pas de Modification - + Creative Commons Attribution-NonCommercial CreativeCommons Paternité-Pas d’Utilisation Commerciale - + Creative Commons Attribution-NonCommercial-ShareAlike CreativeCommons Paternité-Pas d’utilisation commerciale-Partage à l’identique - + Creative Commons Attribution-NonCommercial-NoDerivatives CreativeCommons Paternité-Pas d’utilisation commerciale-Pas de modification - + Public Domain Domaine public - + FreeArt Art Libre - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Autre - + License URL URL de licence - + URL describing more about the license L'URL décrit plus en détail la licence @@ -4224,17 +4239,17 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Format de la date à utiliser. - + Default Défaut - + Format Format @@ -4718,7 +4733,6 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> - Corner where navigation cube is shown Coin où le cube de navigation est affiché @@ -4757,6 +4771,11 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com>Font name: Nom de la police : + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4774,8 +4793,8 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Taille de la police pour le texte du NaviCube</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4937,52 +4956,52 @@ Mouse tilting is not disabled by this setting. Désactiver l’inclinaison par geste de l’écran tactile - + Isometric Isométrique - + Dimetric Dimétrique - + Trimetric Trimétrique - + Top Dessus - + Front Face - + Left Gauche - + Right Droit - + Rear Arrière - + Bottom Dessous - + Custom Personnalisée @@ -5390,12 +5409,12 @@ Le système par défaut est celui défini dans les préférences générales. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unité inconnue : - + unit mismatch unité incompatible @@ -7278,7 +7297,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Modifiez l’objet lié @@ -7286,12 +7305,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Erreur - + Object not found Objet introuvable @@ -8336,22 +8355,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exporter vers PDF - + PDF file Fichier PDF - + Opening file failed L'ouverture du fichier a échoué - + Can't open file '%1' for writing. Le fichier '%1' n'accepte pas l'écriture. @@ -9210,12 +9229,12 @@ Veuillez ouvrir une fenêtre de navigateur et saisir : http://localhost:%1.Options... - + Out of memory Mémoire insuffisante - + Not enough memory available to display the data. Mémoire insuffisante pour afficher les données. @@ -12129,12 +12148,12 @@ Voulez-vous tout de même continuer ? ViewIsometricCmd - + Isometric Isométrique - + Set NaviCube to Isometric mode Régler NaviCube en mode isométrique @@ -12142,12 +12161,12 @@ Voulez-vous tout de même continuer ? ViewOrthographicCmd - + Orthographic Orthographique - + Set View to Orthographic mode Définir la vue en mode orthographique @@ -12155,12 +12174,12 @@ Voulez-vous tout de même continuer ? ViewPerspectiveCmd - + Perspective Perspective - + Set View to Perspective mode Définir la vue en mode Perspective @@ -12168,12 +12187,12 @@ Voulez-vous tout de même continuer ? ViewZoomToFitCmd - + Zoom to fit Ajuster le zoom - + Zoom so that model fills the view Zoom pour que le modèle remplisse la vue diff --git a/src/Gui/Language/FreeCAD_gl.qm b/src/Gui/Language/FreeCAD_gl.qm index 7c3750d88f..0c38390ac6 100644 Binary files a/src/Gui/Language/FreeCAD_gl.qm and b/src/Gui/Language/FreeCAD_gl.qm differ diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index 35477d89e8..b82d71704d 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Axustes da cámara - + Orientation Orientación - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -4174,62 +4174,77 @@ You can also use the form: John Doe <john@doe.com> A licenza por defecto para os novos documentos - + All rights reserved Tódolos dereitos reservados - + Creative Commons Attribution Recoñecemento Creative Commons - + Creative Commons Attribution-ShareAlike Creative Commons Recoñecemento-Compartir igual - + Creative Commons Attribution-NoDerivatives Creative Commons Recoñecemento - Sen obra derivada - + Creative Commons Attribution-NonCommercial Creative Commons Recoñecemento - Non comercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Recoñecemento - Non comercial-Compartir igual - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Recoñecemento - Non comercial - Sen obra derivada - + Public Domain Dominio público - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Outros - + License URL URL da licenza - + URL describing more about the license URL que describe máis sobre a licenza @@ -4237,17 +4252,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. O formato de data a empregar. - + Default Por defecto - + Format Formato @@ -4731,7 +4746,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Corner where navigation cube is shown @@ -4770,6 +4784,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4787,8 +4806,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4952,52 +4971,52 @@ Mouse tilting is not disabled by this setting. Desactiva o xesto de inclinación de pantalla táctil - + Isometric Isométrica - + Dimetric Dimétrica - + Trimetric Trimétrica - + Top Enriba - + Front Fronte - + Left Esquerda - + Right Dereita - + Rear Traseira - + Bottom Embaixo - + Custom Personalizar @@ -5405,12 +5424,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unidade descoñecida: - + unit mismatch unit mismatch @@ -7298,7 +7317,7 @@ No lado dereito escolléronse %2. Gui::PropertyEditor::LinkLabel - + Change the linked object Trocar obxecto ligado @@ -7306,12 +7325,12 @@ No lado dereito escolléronse %2. Gui::PropertyEditor::LinkSelection - + Error Erro - + Object not found Obxecto non atopado @@ -8358,22 +8377,22 @@ Quere especificar outro directorio? Gui::View3DInventor - + Export PDF Exportar en PDF - + PDF file Ficheiro PDF - + Opening file failed Falla ó abrir o ficheiro - + Can't open file '%1' for writing. Non se pode abrir o ficheiro '%1' para escrita. @@ -9231,12 +9250,12 @@ Por favor, abra un buscador e escriba: http://localhost:%1. Opcións... - + Out of memory Sen memoria - + Not enough memory available to display the data. Non hai memoria dispoñíbel para visualizar os datos. @@ -12153,12 +12172,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Axuste NaviCube a modo Isométrico @@ -12166,12 +12185,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ortográfica - + Set View to Orthographic mode Conxunto de Vista a modo Ortogonal @@ -12179,12 +12198,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Conxunto de Vista a modo Perspectiva @@ -12192,12 +12211,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom para axustar - + Zoom so that model fills the view Zoom para que o modelo encha a vista diff --git a/src/Gui/Language/FreeCAD_hr.qm b/src/Gui/Language/FreeCAD_hr.qm index 4c32f17641..d4c83b79e4 100644 Binary files a/src/Gui/Language/FreeCAD_hr.qm and b/src/Gui/Language/FreeCAD_hr.qm differ diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index e528531fe1..459eaaf2a0 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -759,37 +759,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Postavke kamere - + Orientation Orijentacija - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Trenutni prikaz @@ -4204,62 +4204,77 @@ Možete koristiti i obrazac: John Doe <john@doe.com> Zadana licenca za nove datoteke - + All rights reserved Sva prava pridržana - + Creative Commons Attribution CreativeCommons imenovanje - + Creative Commons Attribution-ShareAlike CreativeCommons Imenovanje-Dijeli pod istim uvjetima - + Creative Commons Attribution-NoDerivatives CreativeCommons imenovanje-Bez promjena - + Creative Commons Attribution-NonCommercial CreativeCommons Imenovanje-Nekomercijalno - + Creative Commons Attribution-NonCommercial-ShareAlike CreativeCommons Imenovanje-Nekomercijalno-Dijeli pod istim uvjetima - + Creative Commons Attribution-NonCommercial-NoDerivatives CreativeCommons Imenovanje-Nekomercijalno-Bez promjena - + Public Domain Javne domene - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Drugo - + License URL URL licence - + URL describing more about the license URL koji opisuje više o licenci @@ -4267,17 +4282,17 @@ Možete koristiti i obrazac: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Format datuma koji će se koristiti. - + Default Inicijalno - + Format Format @@ -4770,7 +4785,6 @@ Možete koristiti i obrazac: John Doe <john@doe.com> - Corner where navigation cube is shown Ugao gdje je prikazana kocka za navigaciju @@ -4811,6 +4825,11 @@ Možete koristiti i obrazac: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4828,8 +4847,8 @@ Možete koristiti i obrazac: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4999,52 +5018,52 @@ Naginjanje miša nije onemogućeno ovom postavkom. Onemogući nagib geste zaslona osjetljivog na dodir - + Isometric Izometrički - + Dimetric Dvometrički - + Trimetric Trimetrički - + Top Gore - + Front Ispred - + Left Lijevo - + Right Desno - + Rear Iza - + Bottom Ispod - + Custom Prilagođeno @@ -5456,12 +5475,12 @@ Sustav preferencija je onaj skup postavki koji se nalazi u općim preferencijam Gui::Dialog::DlgUnitsCalculator - + unknown unit: nepoznata mjerna jedinica: - + unit mismatch mjerne jedinice se ne podudaraju @@ -7354,7 +7373,7 @@ Kako želite nastaviti? Gui::PropertyEditor::LinkLabel - + Change the linked object Promjena povezanog objekta @@ -7362,12 +7381,12 @@ Kako želite nastaviti? Gui::PropertyEditor::LinkSelection - + Error Pogreška - + Object not found Objekt nije pronađen @@ -8415,22 +8434,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Izvoz PDF - + PDF file PDF Datoteka - + Opening file failed Otvaranje dokumenta nije uspjelo - + Can't open file '%1' for writing. Ne mogu otvoriti dokument '%1' za ispis. @@ -9296,12 +9315,12 @@ Please open a browser window and type in: http://localhost:%1. Opcije ... - + Out of memory Bez memorije - + Not enough memory available to display the data. Nema dovoljno dostupne memorije za prikaz podataka. @@ -12233,12 +12252,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewIsometricCmd - + Isometric Izometrički - + Set NaviCube to Isometric mode Postavljanje NaviCube u izometrički način @@ -12246,12 +12265,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewOrthographicCmd - + Orthographic Ortografijska - + Set View to Orthographic mode Postavi pogled na Ortografski način @@ -12259,12 +12278,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Postavi pogled na perspektivu @@ -12272,12 +12291,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewZoomToFitCmd - + Zoom to fit Povećaj da stane - + Zoom so that model fills the view Zumiranja tako da model ispunjava u pogledu diff --git a/src/Gui/Language/FreeCAD_hu.qm b/src/Gui/Language/FreeCAD_hu.qm index bdb0949714..ff70546720 100644 Binary files a/src/Gui/Language/FreeCAD_hu.qm and b/src/Gui/Language/FreeCAD_hu.qm differ diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 78158431ba..bad4c5a186 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kamera beállításai - + Orientation Tájolás - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuális nézet @@ -4167,62 +4167,77 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> Az új dokumentumok alapértelmezett licence - + All rights reserved Minden jog fenntartva - + Creative Commons Attribution Creative Commons hozzárendelés - + Creative Commons Attribution-ShareAlike Creative Commons hozzárendelés megosztás egyenlő feltételek mellett - + Creative Commons Attribution-NoDerivatives Creative Commons hozzárendelés-nincs szerkesztés - + Creative Commons Attribution-NonCommercial CreativeCommons hozzárendelés-nem kereskedelmi - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Hozzárendelés - Nem kereskedelmi - Megosztás egyenlő feltételek mellett - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons hozzárendelés-nem kereskedelmi-Származtatások nélkül - + Public Domain Nyilvános Domén - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Egyéb - + License URL Licenc URL-címe - + URL describing more about the license A licenc részleteinek URL-je @@ -4230,17 +4245,17 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. A használandó dátum forma. - + Default Alapértelmezett - + Format Formátum @@ -4724,7 +4739,6 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> - Corner where navigation cube is shown Sarok, ahol a navigációs kocka látható @@ -4763,6 +4777,11 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> Font name: Betűtípus neve: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4780,8 +4799,8 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>A NaviCube szövegének betűmérete</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4945,52 +4964,52 @@ Ez a beállítás nem tiltja le az egér megdöntése beállítást.Érintőképernyős döntés kikapcsolása - + Isometric Izometrikus - + Dimetric Dimetrikus - + Trimetric Trimetrikus - + Top Felülnézet - + Front Elölnézet - + Left Bal - + Right Jobb - + Rear Hátsó nézet - + Bottom Alsó - + Custom Egyéni @@ -5397,12 +5416,12 @@ Az előnyben részesített rendszer az általános beállításokban beállítot Gui::Dialog::DlgUnitsCalculator - + unknown unit: ismeretlen mértékegység: - + unit mismatch mértékegység eltérés @@ -7290,7 +7309,7 @@ a jobboldali nézetben %2 pont lett jelölve. Gui::PropertyEditor::LinkLabel - + Change the linked object Hivatkozott objektum megváltoztatása @@ -7298,12 +7317,12 @@ a jobboldali nézetben %2 pont lett jelölve. Gui::PropertyEditor::LinkSelection - + Error Hiba - + Object not found Az objektum nem található @@ -8348,22 +8367,22 @@ Meg szeretne adni egy másik könyvtárat? Gui::View3DInventor - + Export PDF Exportálás PDF-be - + PDF file PDF-fájl - + Opening file failed Fájl megnyitása sikertelen - + Can't open file '%1' for writing. Nem lehet megnyitni a(z) '%1' fájlt írásra. @@ -9223,12 +9242,12 @@ Nyisson meg egy böngészőt, és írja be: http://localhost:%1. Beállítások... - + Out of memory Kevés a memória - + Not enough memory available to display the data. Nincs elég memória az adatok megjelenítéséhez. @@ -12145,12 +12164,12 @@ Még mindig fojtatni szeretné? ViewIsometricCmd - + Isometric Izometrikus - + Set NaviCube to Isometric mode NaviKocka beállítása izometrikus módra @@ -12158,12 +12177,12 @@ Még mindig fojtatni szeretné? ViewOrthographicCmd - + Orthographic Függőleges vetület - + Set View to Orthographic mode Nézet beállítása függőleges vetületre @@ -12171,12 +12190,12 @@ Még mindig fojtatni szeretné? ViewPerspectiveCmd - + Perspective Perspektíva - + Set View to Perspective mode Nézet beállítása perspektivikus vetületre @@ -12184,12 +12203,12 @@ Még mindig fojtatni szeretné? ViewZoomToFitCmd - + Zoom to fit Mérethez igazítás - + Zoom so that model fills the view Nagyítsa úgy, hogy a modell kitöltse a nézetet diff --git a/src/Gui/Language/FreeCAD_it.qm b/src/Gui/Language/FreeCAD_it.qm index d737c477c7..1622e5c762 100644 Binary files a/src/Gui/Language/FreeCAD_it.qm and b/src/Gui/Language/FreeCAD_it.qm differ diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index 09f8aa4d3b..a68fd253b4 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Impostazioni telecamera - + Orientation Orientamento - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista corrente @@ -4170,62 +4170,77 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Licenza predefinita per i nuovi documenti - + All rights reserved Tutti i diritti riservati - + Creative Commons Attribution Attribuzione Creative Commons - + Creative Commons Attribution-ShareAlike Attribuzione - Creative Commons- Condividi allo stesso modo - + Creative Commons Attribution-NoDerivatives CreativeCommons Attribuzione - Non opere derivate - + Creative Commons Attribution-NonCommercial Attribuzione Creative Commons-Non commerciale - + Creative Commons Attribution-NonCommercial-ShareAlike Attribuzione Creative Commons- Non commerciale - Condividi allo stesso modo - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribuzione - Non commerciale - Non opere derivate - + Public Domain Dominio Pubblico - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Altro - + License URL URL della licenza - + URL describing more about the license URL che descrive di più sulla licenza @@ -4233,17 +4248,17 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Il formato della data da utilizzare. - + Default Predefinito - + Format Formato @@ -4727,7 +4742,6 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> - Corner where navigation cube is shown Angolo in cui viene mostrato il cubo di navigazione @@ -4766,6 +4780,11 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Font name: Nome carattere: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4783,8 +4802,8 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Grandezza carattere per il testo NaviCube</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4837,7 +4856,7 @@ Giradischi Libero: la parte sarà ruotata attorno all'asse z. Free Turntable - Giradischi Libero + Piatto Libero @@ -4948,52 +4967,52 @@ Questa impostazione non disabilitata l'inclinazione tramite mouse. Disattiva l'inclinazione dai gesti del touch screen - + Isometric Isometrica - + Dimetric Dimetrica - + Trimetric Trimetrica - + Top Dall'alto - + Front Di fronte - + Left Da sinistra - + Right Da destra - + Rear Da dietro - + Bottom Dal basso - + Custom Personalizza @@ -5401,12 +5420,12 @@ Il sistema di preferenza è quello impostato nelle preferenze generali. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unità sconosciuta: - + unit mismatch unità non corrispondente @@ -7289,7 +7308,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Cambia l'oggetto collegato @@ -7297,12 +7316,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Errore - + Object not found Oggetto non trovato @@ -8349,22 +8368,22 @@ Vuoi specificare un'altra cartella? Gui::View3DInventor - + Export PDF Esporta in formato PDF - + PDF file File PDF - + Opening file failed Apertura del file non riuscita - + Can't open file '%1' for writing. Impossibile aprire il file '%1' per la scrittura. @@ -9225,12 +9244,12 @@ Aprire una finestra browser e scrivere http://localhost:%1. Opzioni... - + Out of memory Memoria insufficiente - + Not enough memory available to display the data. Memoria disponibile insufficiente per visualizzare i dati. @@ -12147,12 +12166,12 @@ Si desidera ancora procedere? ViewIsometricCmd - + Isometric Isometrica - + Set NaviCube to Isometric mode Imposta NaviCube in modalità isometrica @@ -12160,12 +12179,12 @@ Si desidera ancora procedere? ViewOrthographicCmd - + Orthographic Ortografica - + Set View to Orthographic mode Imposta la vista in modalità ortografica @@ -12173,12 +12192,12 @@ Si desidera ancora procedere? ViewPerspectiveCmd - + Perspective Prospettiva - + Set View to Perspective mode Imposta la vista in prospettiva @@ -12186,12 +12205,12 @@ Si desidera ancora procedere? ViewZoomToFitCmd - + Zoom to fit Adatta alla finestra - + Zoom so that model fills the view Ingrandisce in modo che il modello riempia la vista diff --git a/src/Gui/Language/FreeCAD_ja.qm b/src/Gui/Language/FreeCAD_ja.qm index 3f6a0de574..e73690042b 100644 Binary files a/src/Gui/Language/FreeCAD_ja.qm and b/src/Gui/Language/FreeCAD_ja.qm differ diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index bf0d295c4c..3b8b2b6790 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings カメラ設定 - + Orientation 向き - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 現在のビュー @@ -4149,62 +4149,77 @@ John Doe <john@doe.com> 形式を使用することもできます。新規ドキュメントにおけるデフォルトのライセンス - + All rights reserved 著作権表示 - + Creative Commons Attribution クリエイティブ・コモンズ (表示) - + Creative Commons Attribution-ShareAlike クリエイティブ・コモンズ (表示 - 継承) - + Creative Commons Attribution-NoDerivatives クリエイティブ・コモンズ (表示 - 改変禁止) - + Creative Commons Attribution-NonCommercial クリエイティブ・コモンズ (表示 - 非営利) - + Creative Commons Attribution-NonCommercial-ShareAlike クリエイティブ・コモンズ (表示 - 非営利 - 継承) - + Creative Commons Attribution-NonCommercial-NoDerivatives クリエイティブ・コモンズ (表示 - 非営利 - 改変禁止) - + Public Domain パブリック・ドメイン - + FreeArt 自由芸術ライセンス - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other その他 - + License URL ライセンス URL - + URL describing more about the license ライセンスについてさらに詳しく説明した URL @@ -4212,17 +4227,17 @@ John Doe <john@doe.com> 形式を使用することもできます。 Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. 使用する日付のフォーマット - + Default デフォルト - + Format フォーマット @@ -4706,7 +4721,6 @@ John Doe <john@doe.com> 形式を使用することもできます。 - Corner where navigation cube is shown ナビゲーションキューブが表示される位置 @@ -4745,6 +4759,11 @@ John Doe <john@doe.com> 形式を使用することもできます。Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4762,8 +4781,8 @@ John Doe <john@doe.com> 形式を使用することもできます。 - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4925,52 +4944,52 @@ Mouse tilting is not disabled by this setting. タッチスクリーンのチルトジェスチャーを無効化 - + Isometric アイソメトリック - + Dimetric ダイメトリック - + Trimetric 不等角投影図法 - + Top 上面図 - + Front 正面図 - + Left 左面図 - + Right 右面図 - + Rear 背面図 - + Bottom 底面 - + Custom カスタム @@ -5377,12 +5396,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: 未知の単位: - + unit mismatch 単位の不一致 @@ -7264,7 +7283,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object リンクされたオブジェクトを変更 @@ -7272,12 +7291,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error エラー - + Object not found オブジェクトが見つかりません @@ -8323,22 +8342,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF PDFファイル形式でエクスポート - + PDF file PDFファイル - + Opening file failed ファイルを開けませんでした。 - + Can't open file '%1' for writing. 書き込み用ファイル '%1' を開くことができません。 @@ -9197,12 +9216,12 @@ Please open a browser window and type in: http://localhost:%1. オプション... - + Out of memory メモリ不足 - + Not enough memory available to display the data. データを表示するのに十分なメモリがありません。 @@ -12114,12 +12133,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric アイソメトリック - + Set NaviCube to Isometric mode ナビキューブを等角投影モードに設定 @@ -12127,12 +12146,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 正射投影 - + Set View to Orthographic mode 表示を正射投影モードに設定 @@ -12140,12 +12159,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 透視投影 - + Set View to Perspective mode 表示を透視投影モードに設定 @@ -12153,12 +12172,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit フィットするようズーム - + Zoom so that model fills the view モデルがビュー全体に表示されるようズーム diff --git a/src/Gui/Language/FreeCAD_ka.qm b/src/Gui/Language/FreeCAD_ka.qm index 9156a4f173..a54ca9d23d 100644 Binary files a/src/Gui/Language/FreeCAD_ka.qm and b/src/Gui/Language/FreeCAD_ka.qm differ diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts index 0eb5904d69..40c2512369 100644 --- a/src/Gui/Language/FreeCAD_ka.ts +++ b/src/Gui/Language/FreeCAD_ka.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings კამერის პარამეტრები - + Orientation ორიენტაცია - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view მიმდინარე ხედი @@ -4161,62 +4161,77 @@ You can also use the form: John Doe <john@doe.com> ახალი დოკუმენტების ნაგულისხმევი ლიცენზია - + All rights reserved ყველა უფლება დაცულია - + Creative Commons Attribution Creative Commons: ავტორობის მითითებით - + Creative Commons Attribution-ShareAlike Creative Commons: ავტორობის მითითებით, გაზიარება იგივე პირობებით - + Creative Commons Attribution-NoDerivatives Creative Commons: ავტორობის მითითებით, გადამუშავების გარეშე - + Creative Commons Attribution-NonCommercial Creative Commons: ავტორობის მითითებით, არაკომერციული გამოყენებისათვის - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons: ავტორობის მითითებით, არაკომერციული გამოყენებისათვის, გაზიარება იგივე პირობებით - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons: ავტორობის მითითებით, არაკომერციული გამოყენებისათვის, გაზიარება იგივე პირობებით - + Public Domain საყოველთაო კუთვნილება - + FreeArt უფასო ხელოვნება - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other სხვა - + License URL ლიცენზის URL - + URL describing more about the license ბმული, სადაც ლიცენზიების შესახებ უფო მეტი რამ წერია @@ -4224,17 +4239,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. თარიღის გამოყენებადი ფორმატი. - + Default ნაგულისხმევი - + Format ფორმატი @@ -4718,7 +4733,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown ეკრანის კუთხე, რომელშიც ნავიგაციის კუბ გამოჩნდება @@ -4757,6 +4771,11 @@ You can also use the form: John Doe <john@doe.com> Font name: ფონტის სახელი: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4774,8 +4793,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>ფონტის ზომა NaviCube-ის ტექსტისთვის.</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4939,52 +4958,52 @@ Mouse tilting is not disabled by this setting. სენსორული ეკრანის მისახვედრი ჟესტების გამორთვა - + Isometric იზომეტრიული - + Dimetric დიმეტრიული - + Trimetric ტრიმეტრული - + Top თავზე - + Front წინ - + Left მარცხნივ - + Right მარჯვნივ - + Rear უკან - + Bottom ძირზე - + Custom მომხმარებლის @@ -5391,12 +5410,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: უცნობი საზომ ერთეული: - + unit mismatch საზომი ერთეულები არ ემთხვევა @@ -7282,7 +7301,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object მიბმული ობიექტის შეცვლა @@ -7290,12 +7309,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error შეცდომა - + Object not found ობიექტი ნაპოვნი არაა @@ -8342,22 +8361,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF PDF-ად გატანა - + PDF file PDF ფაილი - + Opening file failed ფაილის გახსნის შეცდომა - + Can't open file '%1' for writing. ჩასაწერად ფაილის „%1“ გახსნა შეუძლებელია. @@ -9218,12 +9237,12 @@ Please open a browser window and type in: http://localhost:%1. პარამეტრები... - + Out of memory მეხსიერება აღარ არის - + Not enough memory available to display the data. არ არის საკმარისი მეხსიერება მონაცემთა საჩვენებლად. @@ -12139,12 +12158,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric იზომეტრიული - + Set NaviCube to Isometric mode ნავიკუბის იზომეტრიულ რეჟიმში გადართვა @@ -12152,12 +12171,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic ორთოგონალური პროექცია - + Set View to Orthographic mode ხედის ორთოგრაფიულ რეჟიმზე დაყენება @@ -12165,12 +12184,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective პერსპექტივა - + Set View to Perspective mode ხედის პერსპექტიულ პროექციაზე დაყენება @@ -12178,12 +12197,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit ხედის ფანჯარაში ჩატევა - + Zoom so that model fills the view ხედიის ზომებამდე გადიდება diff --git a/src/Gui/Language/FreeCAD_ko.qm b/src/Gui/Language/FreeCAD_ko.qm index 57cc0c0815..afbb61f451 100644 Binary files a/src/Gui/Language/FreeCAD_ko.qm and b/src/Gui/Language/FreeCAD_ko.qm differ diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 6e748abcef..aa629be51e 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -759,37 +759,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings 카메라 설정 - + Orientation Orientation - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 현재 보기 @@ -4164,62 +4164,77 @@ You can also use the form: John Doe <john@doe.com> 새 문서에 대한 기본 라이선스 - + All rights reserved 모든 권리 소유 - + Creative Commons Attribution 크리에이티브 커먼즈: 저작자표시 - + Creative Commons Attribution-ShareAlike 크리에이티브 커먼즈: 저작자표시, 동일조건 변경허락 - + Creative Commons Attribution-NoDerivatives 크리에이티브 커먼즈: 저작자표시, 파생물제작불가 - + Creative Commons Attribution-NonCommercial 크리에이티브 커먼스: 저작자표시, 비상업적용도 - + Creative Commons Attribution-NonCommercial-ShareAlike 크리에이티브 커먼즈: 저작자표시, 비상업적용도, 동일조건 번경허락 - + Creative Commons Attribution-NonCommercial-NoDerivatives 크리에이티브 커먼스: 저작자표시, 비상업적용도, 파생물제작불가 - + Public Domain 공공 도메인 - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other 기타 - + License URL 라이선스 URL - + URL describing more about the license 라이선스에 대해 자세히 설명하는 URL @@ -4227,17 +4242,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. 사용할 날짜 형식입니다. - + Default 기본값 - + Format 형식 @@ -4721,7 +4736,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown 탐색 입방체가 표시되는 모서리 @@ -4760,6 +4774,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4777,8 +4796,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4942,52 +4961,52 @@ Mouse tilting is not disabled by this setting. 터치스크린 틸트 제스처 비활성화하기 - + Isometric 아이소메트릭 - + Dimetric 디메트릭 - + Trimetric 트라이메트릭 - + Top 평면 - + Front 정면 - + Left 좌측면 - + Right 우측면 - + Rear 배면 - + Bottom 저면 - + Custom 색상 편집 @@ -5394,12 +5413,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: 알 수 없는 단위: - + unit mismatch 단위 불일치 @@ -7285,7 +7304,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object 링크된 객체 변경하기 @@ -7293,12 +7312,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error 에러 - + Object not found 객체를 찾을 수 없습니다 @@ -8344,22 +8363,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF PDF로 내보내기 - + PDF file PDF 파일 - + Opening file failed 파일 열기 실패 - + Can't open file '%1' for writing. 쓰기에 사용할 '%1' 파일을 열 수 없습니다. @@ -9218,12 +9237,12 @@ Please open a browser window and type in: http://localhost:%1. 옵션... - + Out of memory 메모리 부족 - + Not enough memory available to display the data. 데이터를 화면표시하는 데 사용할 수 있는 메모리가 충분하지 않습니다. @@ -12134,12 +12153,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric 아이소메트릭 - + Set NaviCube to Isometric mode NaviCube를 아이소메트릭 모드로 설정하기 @@ -12147,12 +12166,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 직교 - + Set View to Orthographic mode 보기를 직각 모드로 설정합니다. @@ -12160,12 +12179,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 투시 - + Set View to Perspective mode 보기를 투시 모드로 설정하기 @@ -12173,12 +12192,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit 화면에 맞춤 - + Zoom so that model fills the view 모델이 보기를 채우도록 확대/축소하기 diff --git a/src/Gui/Language/FreeCAD_nl.qm b/src/Gui/Language/FreeCAD_nl.qm index 37b460a337..84e80796a4 100644 Binary files a/src/Gui/Language/FreeCAD_nl.qm and b/src/Gui/Language/FreeCAD_nl.qm differ diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 0ac0b6ac1a..f8a4a051d1 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Camera-instellingen - + Orientation Oriëntatie - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Huidige weergave @@ -4170,62 +4170,77 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> Standaardlicentie voor nieuwe documenten - + All rights reserved Alle rechten voorbehouden - + Creative Commons Attribution Creative Commons Naamsvermelding - + Creative Commons Attribution-ShareAlike Creative Commons Naamsvermelding-Gelijk delen - + Creative Commons Attribution-NoDerivatives Creative Commons-Naamsvermelding-GeenAfgelijkeDelen - + Creative Commons Attribution-NonCommercial Creative Commons Naamsvermelding-niet-commercieel - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Naamsvermelding-NietCommercieel-GelijkDelen - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons-Naamsvermelding-NietComercieel-GeenAfgeleideWerken - + Public Domain Publiek domein - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Andere - + License URL Licentie URL - + URL describing more about the license URL beschrijft meer over de licentie @@ -4233,17 +4248,17 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. De notatie van de datum om te gebruiken. - + Default Standaard - + Format Formaat @@ -4727,7 +4742,6 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> - Corner where navigation cube is shown Hoek waar navigatiekubus wordt weergegeven @@ -4766,6 +4780,11 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4783,8 +4802,8 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4948,52 +4967,52 @@ De kanteling van de muis wordt niet uitgeschakeld door deze instelling.Touchscreen kantel gebaar uitschakelen - + Isometric Isometrisch - + Dimetric Dimetrisch - + Trimetric Trimetrisch - + Top Boven - + Front Voorkant - + Left Links - + Right Rechts - + Rear Achter - + Bottom Onder - + Custom Eigen @@ -5401,12 +5420,12 @@ Het voorkeurssysteem is het systeem dat in de algemene voorkeuren is ingesteld.< Gui::Dialog::DlgUnitsCalculator - + unknown unit: onbekende eenheid: - + unit mismatch wanverhouding van eenheid @@ -7287,7 +7306,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Het gekoppelde object wijzigen @@ -7295,12 +7314,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Fout - + Object not found Object niet gevonden @@ -8344,22 +8363,22 @@ Wilt u een andere map opgeven? Gui::View3DInventor - + Export PDF Exporteren als PDF - + PDF file PDF-bestand - + Opening file failed Bestand openen mislukt - + Can't open file '%1' for writing. Kan bestand '%1' niet openen om te schrijven. @@ -9218,12 +9237,12 @@ Open een browservenster en typ: http://localhost:%1. Opties... - + Out of memory Onvoldoende geheugen - + Not enough memory available to display the data. Niet genoeg geheugen beschikbaar om de gegevens weer te geven. @@ -12140,12 +12159,12 @@ Wilt u toch doorgaan? ViewIsometricCmd - + Isometric Isometrisch - + Set NaviCube to Isometric mode Stel de NaviCube in op de isometrische modus @@ -12153,12 +12172,12 @@ Wilt u toch doorgaan? ViewOrthographicCmd - + Orthographic Orthografisch - + Set View to Orthographic mode Stel de weergave in op de orthografische modus @@ -12166,12 +12185,12 @@ Wilt u toch doorgaan? ViewPerspectiveCmd - + Perspective Perspectief - + Set View to Perspective mode Stel de weergave in op Perspectiefmodus in @@ -12179,12 +12198,12 @@ Wilt u toch doorgaan? ViewZoomToFitCmd - + Zoom to fit Zoom om te passen - + Zoom so that model fills the view Zoom zodat het model het weergavegebied vult diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index 37a43625f7..b6222b864d 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 947b7fb672..24ed270f99 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -758,37 +758,37 @@ podczas kliknięcia lewym lub prawym przyciskiem myszki i przesuwaj kursor w gó Gui::Dialog::CameraDialog - + Camera settings Ustawienia ujęcia widoku - + Orientation Orientacja - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Bieżący widok @@ -2341,7 +2341,7 @@ wyświetli ekran powitalny Macros - Makrodefinicje + Makropolecenie @@ -4170,62 +4170,77 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com>Domyślna licencja dla nowych dokumentów - + All rights reserved Wszystkie prawa zastrzeżone - + Creative Commons Attribution Uznanie autorstwa CC BY - + Creative Commons Attribution-ShareAlike Uznanie autorstwa-Na tych samych warunkach CC BY-SA - + Creative Commons Attribution-NoDerivatives Uznanie autorstwa - Bez utworów zależnych CC BY-ND - + Creative Commons Attribution-NonCommercial Uznanie autorstwa-Użycie niekomercyjne CC BY-NC - + Creative Commons Attribution-NonCommercial-ShareAlike Uznanie autorstwa-Użycie niekomercyjne-Na tych samych warunkach CC BY-NC-SA - + Creative Commons Attribution-NonCommercial-NoDerivatives Uznanie autorstwa-Użycie niekomercyjne-BezPochodnych CC BY-NC-ND - + Public Domain Domena publiczna - + FreeArt Bezpłatna grafika - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Inne - + License URL Adres URL licencji - + URL describing more about the license Witryna ze szczegółami licencji @@ -4233,17 +4248,17 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Używany format zapisu daty. - + Default Domyślny - + Format Format @@ -4579,7 +4594,7 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Macro - Makrodefinicje + Makropolecenia @@ -4727,7 +4742,6 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> - Corner where navigation cube is shown Narożnik, w którym wyświetlana jest kostka nawigacyjna @@ -4766,6 +4780,11 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com>Font name: Nazwa czcionki: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4783,8 +4802,8 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Rozmiar czcionki do opisu kostki nawigacyjnej</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4948,52 +4967,52 @@ Obracanie przy pomocy myszki nie jest blokowane. Wyłącz gest obrotu na ekranie dotykowym - + Isometric Widok izometryczny - + Dimetric Dimetryczny - + Trimetric Trimetryczny - + Top Od góry - + Front Od przodu - + Left Od lewej - + Right Od prawej - + Rear Od tył - + Bottom Od dołu - + Custom Niestandardowy @@ -5401,12 +5420,12 @@ System preferencji to ten, który jest ustawiony w preferencjach ogólnych. Gui::Dialog::DlgUnitsCalculator - + unknown unit: nieznana jednostka: - + unit mismatch niezgodność jednostek @@ -6971,7 +6990,7 @@ Do you want to save your changes? Macros - Makropolecenie + Makrodefinicje @@ -7292,7 +7311,7 @@ Jak chcesz kontynuować? Gui::PropertyEditor::LinkLabel - + Change the linked object Zmień połączony obiekt @@ -7300,12 +7319,12 @@ Jak chcesz kontynuować? Gui::PropertyEditor::LinkSelection - + Error Błąd - + Object not found Obiekt nie znaleziony @@ -8347,22 +8366,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Eksportuj do PDF - + PDF file Plik PDF - + Opening file failed Otwarcie pliku nie powiodło się - + Can't open file '%1' for writing. Nie można otworzyć pliku "%1" do zapisu. @@ -9222,12 +9241,12 @@ Proszę otworzyć okno przeglądarki i wpisać: http://localhost:%1.Opcje... - + Out of memory Przekroczono limit pamięci - + Not enough memory available to display the data. Za mało dostępnej pamięci, aby wyświetlić dane. @@ -10371,7 +10390,7 @@ bieżącej kopii zostaną utracone. Measure distance - Pomiar odległości + Wymiarowanie odległości @@ -10379,7 +10398,7 @@ bieżącej kopii zostaną utracone. Measure distance - Wymiarowanie odległości + Pomiar odległości @@ -11654,7 +11673,7 @@ bieżącej kopii zostaną utracone. Fullscreen - Cały ekran + Pełny ekran @@ -11888,7 +11907,7 @@ bieżącej kopii zostaną utracone. Display the active view either in fullscreen, in undocked or docked mode - Wyświetl aktywny widok na pełnym ekranie, w trybie niezadokowanym lub zadokowanym + Wyświetl aktywny widok w trybie pełnoekranowym, w trybie niezadokowanym lub zadokowanym @@ -11896,7 +11915,7 @@ bieżącej kopii zostaną utracone. Fullscreen - Pełny ekran + Cały ekran @@ -11930,7 +11949,7 @@ bieżącej kopii zostaną utracone. Display the active view either in fullscreen, in undocked or docked mode - Wyświetl aktywny widok w trybie pełnoekranowym, w trybie niezadokowanym lub zadokowanym + Wyświetl aktywny widok na pełnym ekranie, w trybie niezadokowanym lub zadokowanym @@ -12144,12 +12163,12 @@ Czy nadal chcesz kontynuować? ViewIsometricCmd - + Isometric Widok izometryczny - + Set NaviCube to Isometric mode Ustaw kostkę nawigacyjną na Widok izometryczny @@ -12157,12 +12176,12 @@ Czy nadal chcesz kontynuować? ViewOrthographicCmd - + Orthographic Ortogonalny - + Set View to Orthographic mode Ustaw widok na tryb ortogonalny @@ -12170,12 +12189,12 @@ Czy nadal chcesz kontynuować? ViewPerspectiveCmd - + Perspective Perspektywa - + Set View to Perspective mode Ustaw widok na tryb perspektywy @@ -12183,12 +12202,12 @@ Czy nadal chcesz kontynuować? ViewZoomToFitCmd - + Zoom to fit Przybliż i dopasuj - + Zoom so that model fills the view Przybliż tak, aby model wypełnił widok @@ -12268,7 +12287,7 @@ Czy nadal chcesz kontynuować? Macro - Makropolecenia + Makrodefinicje diff --git a/src/Gui/Language/FreeCAD_pt-BR.qm b/src/Gui/Language/FreeCAD_pt-BR.qm index da40ffc274..fdb99a119f 100644 Binary files a/src/Gui/Language/FreeCAD_pt-BR.qm and b/src/Gui/Language/FreeCAD_pt-BR.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index ee673eb4e7..2f6b32fbb2 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Configurações da câmera - + Orientation Orientação - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista atual @@ -4165,62 +4165,77 @@ Você também pode usar o formulário: João Silva <joao@silva.com>Licença padrão para novos arquivos - + All rights reserved Todos os direitos reservados - + Creative Commons Attribution Atribuição Creative Commons (CC) - + Creative Commons Attribution-ShareAlike Atribuição Creative Commons-Compartilhalgual - + Creative Commons Attribution-NoDerivatives Atribuição Creative Commons-SemDerivações - + Creative Commons Attribution-NonCommercial Atribuição Creative Commons-NãoComercial - + Creative Commons Attribution-NonCommercial-ShareAlike Atribuição Creative Commons-NãoComercial-Compartilhalgual - + Creative Commons Attribution-NonCommercial-NoDerivatives Atribuição Creative Commons-NãoComercial-SemDerivações - + Public Domain Domínio público - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Outro - + License URL URL da licença - + URL describing more about the license URL descrevendo mais sobre a licença @@ -4228,17 +4243,17 @@ Você também pode usar o formulário: João Silva <joao@silva.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. O formato da data a ser utilizada. - + Default Padrão - + Format Formato @@ -4722,7 +4737,6 @@ Você também pode usar o formulário: João Silva <joao@silva.com> - Corner where navigation cube is shown Canto onde o cubo de navegação é mostrado @@ -4761,6 +4775,11 @@ Você também pode usar o formulário: João Silva <joao@silva.com>Font name: Nome da fonte: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4778,8 +4797,8 @@ Você também pode usar o formulário: João Silva <joao@silva.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4943,52 +4962,52 @@ A inclinação do mouse não está afetada por esta configuração.Desativar o gesto de inclinação da tela sensível ao toque - + Isometric Isométrico - + Dimetric Diamétrico - + Trimetric Trimétrico - + Top Topo - + Front Frente - + Left Esquerda - + Right Direito - + Rear Traseira - + Bottom De baixo - + Custom Personalizado @@ -5395,12 +5414,12 @@ O sistema de preferências é aquele que está configurado nas preferências ger Gui::Dialog::DlgUnitsCalculator - + unknown unit: unidade desconhecida: - + unit mismatch incompatibilidade de unidade @@ -7283,7 +7302,7 @@ Deseja prosseguir? Gui::PropertyEditor::LinkLabel - + Change the linked object Mudar o objeto vinculado @@ -7291,12 +7310,12 @@ Deseja prosseguir? Gui::PropertyEditor::LinkSelection - + Error Erro - + Object not found Objeto não encontrado @@ -8338,22 +8357,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exportar PDF - + PDF file Arquivo PDF - + Opening file failed Falha ao abrir arquivo - + Can't open file '%1' for writing. Não é possível abrir o arquivo '%1' para a gravação. @@ -9209,12 +9228,12 @@ Please open a browser window and type in: http://localhost:%1. Opções... - + Out of memory Memória insuficiente - + Not enough memory available to display the data. Não há memória suficiente para exibir os dados. @@ -12131,12 +12150,12 @@ Deseja prosseguir mesmo assim? ViewIsometricCmd - + Isometric Isométrico - + Set NaviCube to Isometric mode Colocar o NaviCube em modo isométrico @@ -12144,12 +12163,12 @@ Deseja prosseguir mesmo assim? ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Definir vista para o modo ortogonal @@ -12157,12 +12176,12 @@ Deseja prosseguir mesmo assim? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Definir vista para o modo perspectiva @@ -12170,12 +12189,12 @@ Deseja prosseguir mesmo assim? ViewZoomToFitCmd - + Zoom to fit Enquadrar - + Zoom so that model fills the view Zoom para que o modelo preencha a vista diff --git a/src/Gui/Language/FreeCAD_pt-PT.qm b/src/Gui/Language/FreeCAD_pt-PT.qm index 5a685677e8..251ccc266f 100644 Binary files a/src/Gui/Language/FreeCAD_pt-PT.qm and b/src/Gui/Language/FreeCAD_pt-PT.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index 1f7462b0e6..b47dc6b75b 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -387,7 +387,7 @@ Form - De + Formulário @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Definições da câmara - + Orientation Orientação - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista atual @@ -4169,62 +4169,77 @@ You can also use the form: John Doe <john@doe.com> Licença padrão para novos documentos - + All rights reserved Todos os direitos reservados - + Creative Commons Attribution Atribuição CreativeCommons - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Domínio público - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Outros - + License URL URL da licença - + URL describing more about the license URL describing more about the license @@ -4232,17 +4247,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. The format of the date to use. - + Default Predefinição - + Format Formato @@ -4726,7 +4741,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Canto onde o cubo de navegação é mostrado @@ -4765,6 +4779,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4782,8 +4801,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4947,52 +4966,52 @@ Mouse tilting is not disabled by this setting. Desativar o gesto de inclinação da tela sensível ao toque - + Isometric Isométrica - + Dimetric Dimetrica - + Trimetric Trimétrica - + Top Topo - + Front Frente - + Left Esquerda - + Right Direita - + Rear Traseira - + Bottom De baixo - + Custom Personalizado @@ -5400,12 +5419,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unidade desconhecida: - + unit mismatch incompatibilidade de unidades @@ -7289,7 +7308,7 @@ Como pretende continuar? Gui::PropertyEditor::LinkLabel - + Change the linked object Alterar o objeto ligado @@ -7297,12 +7316,12 @@ Como pretende continuar? Gui::PropertyEditor::LinkSelection - + Error Erro - + Object not found Objeto não encontrado @@ -8347,22 +8366,22 @@ Quer especificar outro diretório? Gui::View3DInventor - + Export PDF Exportar PDF - + PDF file Ficheiro PDF - + Opening file failed Falha ao abrir ficheiro - + Can't open file '%1' for writing. Não é possível abrir o ficheiro '%1' para escrita. @@ -9220,12 +9239,12 @@ Por favor, abra um navegador e digite: http://localhost:%1. Opções ... - + Out of memory Sem Memória - + Not enough memory available to display the data. Não há memória disponível para visualizar os dados. @@ -12142,12 +12161,12 @@ Ainda deseja prosseguir? ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Definir NaviCube para o modo Isometric @@ -12155,12 +12174,12 @@ Ainda deseja prosseguir? ViewOrthographicCmd - + Orthographic Ortográfico - + Set View to Orthographic mode Vista definida para o modo ortogonal @@ -12168,12 +12187,12 @@ Ainda deseja prosseguir? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Definir Vista para o modo de perspectiva @@ -12181,12 +12200,12 @@ Ainda deseja prosseguir? ViewZoomToFitCmd - + Zoom to fit Ajustar para caber - + Zoom so that model fills the view Ajustar o zoom para que o modelo preencha a vista diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index e96bc364b9..f8b319e5c7 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index eacb839c4c..e1f741e737 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -758,37 +758,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Setari camera - + Orientation Orientarea - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vedere curentă @@ -4170,62 +4170,77 @@ Puteți folosi și formatul: John Doe <john@doe.com> Licența implicită pentru documentele noi - + All rights reserved Toate drepturile rezervate - + Creative Commons Attribution Atribuire Creative Commons - + Creative Commons Attribution-ShareAlike Atribuire Creative Commons - Partajare în Condiții Identice - + Creative Commons Attribution-NoDerivatives Atribuire Creative Commons - FărăDerivate - + Creative Commons Attribution-NonCommercial Atribuire Creative Commons - Necomercial - + Creative Commons Attribution-NonCommercial-ShareAlike Atribuire Creative Commons - Necomercial - Partajare în Condiții Identice - + Creative Commons Attribution-NonCommercial-NoDerivatives Atribuire Creative Commons - Necomercial - FărăDerivate - + Public Domain Domeniul public - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Altceva - + License URL URL licență - + URL describing more about the license URL care descrie mai multe despre licență @@ -4233,17 +4248,17 @@ Puteți folosi și formatul: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Formatul datei ce va fi utilizat. - + Default Implicit - + Format Format @@ -4727,7 +4742,6 @@ Puteți folosi și formatul: John Doe <john@doe.com> - Corner where navigation cube is shown Colțul unde este afișat cubul de navigație @@ -4766,6 +4780,11 @@ Puteți folosi și formatul: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4783,8 +4802,8 @@ Puteți folosi și formatul: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4948,52 +4967,52 @@ Afectează numai stilul de navigare prin gesturi. Dezactivaţi inclinarea prin gest a ecranului tactil - + Isometric Izometrică - + Dimetric Dimetric - + Trimetric Trimetric - + Top Partea de sus - + Front Din față - + Left Stanga - + Right Dreapta - + Rear Din spate - + Bottom Partea de jos - + Custom Personalizat @@ -5401,12 +5420,12 @@ Sistemul preferat este cel ales în preferințele generale. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unitatede măsură necunoscută: - + unit mismatch unitățile de măsură nu se potrivesc @@ -7289,7 +7308,7 @@ Cum doresti sa continuam? Gui::PropertyEditor::LinkLabel - + Change the linked object Modificați obiectul atașat @@ -7297,12 +7316,12 @@ Cum doresti sa continuam? Gui::PropertyEditor::LinkSelection - + Error Eroare - + Object not found Obiectul nu a fost găsit @@ -8347,22 +8366,22 @@ Doriţi să specificaţi un alt director? Gui::View3DInventor - + Export PDF Exportă PDF - + PDF file Fişier PDF - + Opening file failed Deschiderea fișierului a eșuat - + Can't open file '%1' for writing. Fișierul r '%1' nu acceptă scrierea. @@ -9220,12 +9239,12 @@ Please open a browser window and type in: http://localhost:%1. Opţiuni... - + Out of memory Memorie insuficientă - + Not enough memory available to display the data. Insuficientă memorie disponibilă pentru a afişa datele. @@ -12142,12 +12161,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Izometrică - + Set NaviCube to Isometric mode Setează NaviCube în modul Izometric @@ -12155,12 +12174,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ortografic - + Set View to Orthographic mode Setează vizualizarea în modul ortografic @@ -12168,12 +12187,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspectivă - + Set View to Perspective mode Setați vizualizarea în modul Perspectivă @@ -12181,12 +12200,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Mărire pentru a se potrivi - + Zoom so that model fills the view Mărire astfel încât modelul umple vizualizarea diff --git a/src/Gui/Language/FreeCAD_ru.qm b/src/Gui/Language/FreeCAD_ru.qm index f20b638e34..cf9a9d1390 100644 Binary files a/src/Gui/Language/FreeCAD_ru.qm and b/src/Gui/Language/FreeCAD_ru.qm differ diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 535e9e87e4..cb301506e1 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Настройки камеры - + Orientation Ориентация - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Текущий вид @@ -3447,16 +3447,13 @@ can be rendered directly by GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by GPU. + При выборе этого параметра будут использоваться объекты буфера вершин (VBO). +VBO - это технология OpenGL, позволяющая хранить координаты вершин совместно с их атрибутами (положение, нормальный вектор, цвет и т.д.) в памяти видеокарты. VBO обеспечивают существенное повышение производительности, поскольку данные находятся в графической памяти, а не в оперативной и поэтому они могут быть обработаны непосредственно в GPU. -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support on the FreeCAD forums +Примечание. Иногда эта функция может привести к множеству различных +проблем, начиная от графических аномалий и заканчивая сбоями GPU. Не забудьте +сообщать, что включали этот параметр при поиске поддержки на форумах FreeCAD + @@ -3467,13 +3464,13 @@ There are 3 options available to achieve this: 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - 'Render Caching' is another way to say 'Rendering Acceleration'. -There are 3 options available to achieve this: -1) 'Auto' (default), let Coin3D decide where to cache. -2) 'Distributed', manually turn on cache for all view provider root node. -3) 'Centralized', manually turn off cache in all nodes of all view provider, and -only cache at the scene graph root node. This offers the fastest rendering speed -but slower response to any scene changes. + 'Кэширование рендера' - по-другому называется 'Ускорение рендера'. +Для его достижения доступно 3 опции: +1) 'Авто' (по умолчанию), пусть Coin3D сам решит, где кэшировать. +2) 'Распределённый', вручную включает кэш для всех корневых узлов провайдера. +3) 'Централизованный', вручную выключает кэш во всех узлах провайдера просмотра и +кэширует только в корневом узле графа сцены. Это обеспечивает самую высокую скорость визуализации, +но более медленную реакцию на любые изменения сцены. @@ -4163,62 +4160,77 @@ You can also use the form: John Doe <john@doe.com> Лицензия по умолчанию для новых документов - + All rights reserved Все права защищены - + Creative Commons Attribution Лицензия «С указанием авторства», сокращённо CC BY - + Creative Commons Attribution-ShareAlike Лицензия «С указанием авторства — С сохранением условий», сокращённо CC BY-SA - + Creative Commons Attribution-NoDerivatives Лицензия «С указанием авторства — Без производных», сокращённо CC BY-ND - + Creative Commons Attribution-NonCommercial Лицензия «С указанием авторства — Некоммерческая», сокращённо CC BY-NC - + Creative Commons Attribution-NonCommercial-ShareAlike Лицензия «С указанием авторства — Некоммерческая — С сохранением условий», сокращённо CC BY-NC-SA - + Creative Commons Attribution-NonCommercial-NoDerivatives Лицензия «С указанием авторства — Некоммерческая — Без производных», сокращённо CC BY-NC-ND - + Public Domain Общественное достояние - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Другое - + License URL URL-адрес лицензии - + URL describing more about the license URL-адрес, описывающий дополнительные сведения о лицензии @@ -4226,17 +4238,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Формат используемой даты. - + Default По умолчанию - + Format Формат @@ -4720,7 +4732,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Угол экрана, в котором показан куб навигации @@ -4759,6 +4770,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Название шрифта: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4776,8 +4792,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4941,52 +4957,52 @@ Mouse tilting is not disabled by this setting. Отключить жест наклона для сенсорного экрана - + Isometric Изометрическая - + Dimetric Диметрическая - + Trimetric Триметрическая - + Top Сверху - + Front Спереди - + Left Слева - + Right Справа - + Rear Сзади - + Bottom Снизу - + Custom Дополнительно @@ -5395,12 +5411,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: неизвестная единица: - + unit mismatch несоответствие единиц измерения @@ -7283,7 +7299,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Изменить связанный объект @@ -7291,12 +7307,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Ошибки - + Object not found Объект не найден @@ -8342,22 +8358,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Экспортировать в PDF - + PDF file Файл PDF - + Opening file failed Ошибка при открытии файла - + Can't open file '%1' for writing. Не удается записать в файл '%1'. @@ -9214,12 +9230,12 @@ Please open a browser window and type in: http://localhost:%1. Параметры... - + Out of memory Недостаточно памяти - + Not enough memory available to display the data. Недостаточно памяти для отображения данных. @@ -12136,12 +12152,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Изометрическая - + Set NaviCube to Isometric mode Установить навигационный куб в изометрический режим @@ -12149,12 +12165,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ортогональный - + Set View to Orthographic mode Установить вид в ортогональный режим @@ -12162,12 +12178,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Перспектива - + Set View to Perspective mode Установить вид в режим перспективной проекции @@ -12175,12 +12191,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Вписать в окно просмотра - + Zoom so that model fills the view Показать модель во весь вид diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm index f7f2eb6030..dd5e0425a4 100644 Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index 7b940d4aad..1def63c859 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -758,37 +758,37 @@ kliknete na levo oz. desno tipko in premikate miško gor oz. dol Gui::Dialog::CameraDialog - + Camera settings Nastavitve kamere - + Orientation Usmerjenost - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Trenutni pogled @@ -4174,62 +4174,77 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Privzeto dovoljenje za nove dokumente - + All rights reserved Vse pravice pridržane - + Creative Commons Attribution Dovoljenje Creative Commons - + Creative Commons Attribution-ShareAlike Dovoljenje Creative Commons - deljenje pod istimi pogoji - + Creative Commons Attribution-NoDerivatives Dovoljenje Creative Commons - brez predelav - + Creative Commons Attribution-NonCommercial Dovoljenje Creative Commons - netržno - + Creative Commons Attribution-NonCommercial-ShareAlike Dovoljenje Creative Commons - netržno - deljenje pod istimi pogoji - + Creative Commons Attribution-NonCommercial-NoDerivatives Dovoljenje Creative Commons - netržno - brez predelav - + Public Domain Javna last - + FreeArt Prosta umetnost - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Drugo - + License URL Spletni naslov dovoljenja - + URL describing more about the license Spletni naslov s podrobnejšim opisom dovoljenja @@ -4237,17 +4252,17 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Vrsta zapisa podatkov, ki naj se uporabi. - + Default Privzeti - + Format Zapis @@ -4731,7 +4746,6 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> - Corner where navigation cube is shown Vogal, v katerem je prikazana krmilna kocka @@ -4770,6 +4784,11 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Font name: Ime pisave: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4787,8 +4806,8 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Velikost napisov na krmilni kocki</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4952,52 +4971,52 @@ S to nastavitvijo nagibanje z miško ni onemogočeno. Onemogoči potezo nagibanja na zaslonu na dotik - + Isometric Izometrična - + Dimetric Dimetrična - + Trimetric Trimetrična - + Top Zgoraj - + Front Spredaj - + Left Levo - + Right Desno - + Rear Zadaj - + Bottom Spodaj - + Custom Po meri @@ -5405,12 +5424,12 @@ Prednostni je sistem, nastavljen v splošnih prednastavitvah. Gui::Dialog::DlgUnitsCalculator - + unknown unit: neznana enota: - + unit mismatch neujemajoča enota @@ -7294,7 +7313,7 @@ Kako želite nadaljevati? Gui::PropertyEditor::LinkLabel - + Change the linked object Spremeni povezan predmet @@ -7302,12 +7321,12 @@ Kako želite nadaljevati? Gui::PropertyEditor::LinkSelection - + Error Napaka - + Object not found Predmeta ni bilo mogoče najti @@ -8354,22 +8373,22 @@ Ali želite navesti drugo mapo? Gui::View3DInventor - + Export PDF Izvoz PDF - + PDF file Datoteka PDF - + Opening file failed Odpiranje datoteke ni uspelo - + Can't open file '%1' for writing. Datoteke '%1' ni mogoče odpreti za pisanje. @@ -9230,12 +9249,12 @@ Odprite brskalnik in vtipkajte: http://localhost:%1. Možnosti ... - + Out of memory Zmanjkalo je pomnilnika - + Not enough memory available to display the data. Ni dovolj pomnilnika za prikaz podatkov. @@ -12152,12 +12171,12 @@ Ali želite vseeno nadaljevati? ViewIsometricCmd - + Isometric Izometrična - + Set NaviCube to Isometric mode Nastavi krmilno kocko na izometrični način @@ -12165,12 +12184,12 @@ Ali želite vseeno nadaljevati? ViewOrthographicCmd - + Orthographic Pravokotno - + Set View to Orthographic mode Nastavi pogled na pravokotni način @@ -12178,12 +12197,12 @@ Ali želite vseeno nadaljevati? ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Nastavi pogled na perspektivni način @@ -12191,12 +12210,12 @@ Ali želite vseeno nadaljevati? ViewZoomToFitCmd - + Zoom to fit Prilagodi povečavo - + Zoom so that model fills the view Povečaj ali pomanjšaj, da se prilega pogledu diff --git a/src/Gui/Language/FreeCAD_sr-CS.qm b/src/Gui/Language/FreeCAD_sr-CS.qm index a812a6a507..7a37f466cb 100644 Binary files a/src/Gui/Language/FreeCAD_sr-CS.qm and b/src/Gui/Language/FreeCAD_sr-CS.qm differ diff --git a/src/Gui/Language/FreeCAD_sr-CS.ts b/src/Gui/Language/FreeCAD_sr-CS.ts index debf1b646c..ebbdb1256b 100644 --- a/src/Gui/Language/FreeCAD_sr-CS.ts +++ b/src/Gui/Language/FreeCAD_sr-CS.ts @@ -758,37 +758,37 @@ dok pritiskš levim ili desnim tasterom i pomeraš miša gore ili dole Gui::Dialog::CameraDialog - + Camera settings Podešavanja kamere - + Orientation Orijentacija - + Q0 Q1 - + Q1 Q2 - + Q2 Q2 - + Q3 Q3 - + Current view Trenutni pogled @@ -4168,62 +4168,77 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com>Podrazumevana licenca za nove dokumente - + All rights reserved Sva prava zadržana - + Creative Commons Attribution Creative Commons licenca «S ukazivanjem na autora», skraćeno Cc By - + Creative Commons Attribution-ShareAlike Creative Commons licenca «S ukazivanjem na autora — Deli pod istim uslovima», skraćeno Cc By-Sa - + Creative Commons Attribution-NoDerivatives Creative Commons licenca «S ukazivanjem na autora — Nema derivata», skraćeno Cc By-Nd - + Creative Commons Attribution-NonCommercial Creative Commons licenca «S ukazivanjem na autora — Nekomercijalna», skraćeno Cc By-Nc - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons licenca «S ukazivanjem na autora — Nekomercijalna - Deli pod istim uslovima», skraćeno Cc By-Nc-Sa - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons licenca «S ukazivanjem na autora — Nekomercijalna - Nema derivata», skraćeno Cc By-Nc-Nd - + Public Domain Javno Vlasništvo - + FreeArt Slobodna umetnost - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Drugo - + License URL URL adresa licence - + URL describing more about the license URL adresa gde možeš pročitati dodatne informacije o licenci @@ -4231,17 +4246,17 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Format datuma koji treba koristiti. - + Default Podrazumevano - + Format Format @@ -4725,7 +4740,6 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com> - Corner where navigation cube is shown Ugao u kom će se nalaziti navigaciona kocka @@ -4764,6 +4778,11 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com>Font name: Naziv fonta: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4781,8 +4800,8 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Veličina fonta teksta navigacione kocke</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4946,52 +4965,52 @@ Mouse tilting is not disabled by this setting. Disable touchscreen tilt gesture - + Isometric Izometrijski - + Dimetric Dimetrijski - + Trimetric Trimetrijski - + Top Odozgo - + Front Spreda - + Left Sleva - + Right Sdesna - + Rear Straga - + Bottom Odozdo - + Custom Sopstvena @@ -5399,12 +5418,12 @@ Podešeni sistem je onaj koji je postavljen u opštim podešavanjima. Gui::Dialog::DlgUnitsCalculator - + unknown unit: nepoznata merna jedinica: - + unit mismatch neusklađenost jedinica @@ -7290,7 +7309,7 @@ Kako želiš da nastaviš? Gui::PropertyEditor::LinkLabel - + Change the linked object Promeni povezani objekat @@ -7298,12 +7317,12 @@ Kako želiš da nastaviš? Gui::PropertyEditor::LinkSelection - + Error Greška - + Object not found Objekat nije pronađen @@ -8350,22 +8369,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Izvezi PDF - + PDF file PDF datoteka - + Opening file failed Otvaranje datoteke neuspešno - + Can't open file '%1' for writing. Can't open file '%1' for writing. @@ -9226,12 +9245,12 @@ Otvori pregledač i ukucaj: http://localhost:%1. Opcije... - + Out of memory Nema dovoljno memorije - + Not enough memory available to display the data. Nema dovoljno memorije za prikazivanje podataka. @@ -12148,12 +12167,12 @@ Da li i dalje želiš da nastaviš? ViewIsometricCmd - + Isometric Izometrijski - + Set NaviCube to Isometric mode Namesti navigacionu kocku u izometrijski pogled @@ -12161,12 +12180,12 @@ Da li i dalje želiš da nastaviš? ViewOrthographicCmd - + Orthographic Ortografski - + Set View to Orthographic mode Namesti pogled na ortografski režim @@ -12174,12 +12193,12 @@ Da li i dalje želiš da nastaviš? ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Namesti režim perspektive @@ -12187,12 +12206,12 @@ Da li i dalje želiš da nastaviš? ViewZoomToFitCmd - + Zoom to fit Zumiraj da stane - + Zoom so that model fills the view Zumiraj tako da model stane u 3D pogled diff --git a/src/Gui/Language/FreeCAD_sr.qm b/src/Gui/Language/FreeCAD_sr.qm index 3d2a07315f..a31cdd845b 100644 Binary files a/src/Gui/Language/FreeCAD_sr.qm and b/src/Gui/Language/FreeCAD_sr.qm differ diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index 16532afd3e..8bf20665b6 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -758,37 +758,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Подешавања камере - + Orientation Оријентација - + Q0 Q1 - + Q1 Q2 - + Q2 Q2 - + Q3 Q3 - + Current view Тренутни поглед @@ -4168,62 +4168,77 @@ You can also use the form: John Doe <john@doe.com> Подразумевана лиценца за нове документе - + All rights reserved Сва права задржана - + Creative Commons Attribution Creative Commons лиценца «С указивањем на аутора», скраћено Cc By - + Creative Commons Attribution-ShareAlike Creative Commons лиценца «С указивањем на аутора — Дели под истим условима», скраћено Cc By-Sa - + Creative Commons Attribution-NoDerivatives Creative Commons лиценца «С указивањем на аутора — Нема деривата», скраћено Cc By-Nd - + Creative Commons Attribution-NonCommercial Creative Commons лиценца «С указивањем на аутора — Некомерцијална», скраћено Cc By-Nc - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons лиценца «С указивањем на аутора — Некомерцијална - Дели под истим условима», скраћено Cc By-Nc-Sa - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons лиценца «С указивањем на аутора — Некомерцијална - Нема деривата», скраћено Cc By-Nc-Nd - + Public Domain Јавно Власништво - + FreeArt Слободна уметност - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Друго - + License URL URL адреса лиценце - + URL describing more about the license URL адреса где можеш прочитати додатне информације о лиценци @@ -4231,17 +4246,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Формат датума који треба користити. - + Default Подразумевано - + Format Формат @@ -4725,7 +4740,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Угао у ком ће се налазити навигациона коцка @@ -4764,6 +4778,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Назив фонта: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4781,8 +4800,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Величина фонта текста навигационе коцке</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4946,52 +4965,52 @@ Mouse tilting is not disabled by this setting. Disable touchscreen tilt gesture - + Isometric Изометријски - + Dimetric Диметријски - + Trimetric Триметријски - + Top Одозго - + Front Спреда - + Left Слева - + Right Сдесна - + Rear Страга - + Bottom Одоздо - + Custom Сопствена @@ -5399,12 +5418,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: непозната мерна јединица: - + unit mismatch неусклађеност јединица @@ -7290,7 +7309,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Промени повезани објекат @@ -7298,12 +7317,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Грешка - + Object not found Објекат није пронађен @@ -8350,22 +8369,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Извези PDF - + PDF file PDF датотека - + Opening file failed Отварање датотеке неуcпешно - + Can't open file '%1' for writing. Can't open file '%1' for writing. @@ -9226,12 +9245,12 @@ Please open a browser window and type in: http://localhost:%1. Опције... - + Out of memory Нема довољно меморије - + Not enough memory available to display the data. Нема довољно меморије за приказивање података. @@ -12148,12 +12167,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Изометријски - + Set NaviCube to Isometric mode Намести навигациону коцку у изометријски поглед @@ -12161,12 +12180,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ортографски - + Set View to Orthographic mode Намести поглед на ортографски режим @@ -12174,12 +12193,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Перспектива - + Set View to Perspective mode Намести режим перспективе @@ -12187,12 +12206,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Зумирај да стане - + Zoom so that model fills the view Зумирај тако да модел стане у 3Д поглед diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index d9c3e4dcd2..315d55ba20 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 09e5981e1b..03c536d79f 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kamerainställningar - + Orientation Orientering - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuell vy @@ -4174,62 +4174,77 @@ Du kan också använda formuläret: John Doe <john@doe.com> Standardlicens för nya dokument - + All rights reserved Alla rättigheter reserverade - + Creative Commons Attribution Creative Commons Erkännande-licens - + Creative Commons Attribution-ShareAlike Creative Commons Erkännande-licens DelaLika - + Creative Commons Attribution-NoDerivatives Creative Commons erkännande, inga bearbetningar - + Creative Commons Attribution-NonCommercial Creative Commons Erkännande-IckeKommersiell - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Erkännande-IckeKommersiell-DelaLika - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons erkännande, icke kommersiell, inga bearbetningar - + Public Domain Fri användning (Public Domain) - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Övrigt - + License URL Licens-URL - + URL describing more about the license URL som beskriver mer om licensen @@ -4237,17 +4252,17 @@ Du kan också använda formuläret: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Datumformat som ska användas. - + Default Standard - + Format Format @@ -4731,7 +4746,6 @@ Du kan också använda formuläret: John Doe <john@doe.com> - Corner where navigation cube is shown Hörn där navigationskub visas @@ -4770,6 +4784,11 @@ Du kan också använda formuläret: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4787,8 +4806,8 @@ Du kan också använda formuläret: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4950,52 +4969,52 @@ Mouse tilting is not disabled by this setting. Avaktivera lutning med gester på pekskärm - + Isometric Isometrisk - + Dimetric Dimetrisk - + Trimetric Trimetrisk - + Top Topp - + Front Front - + Left Vänster - + Right Höger - + Rear Bak - + Bottom Botten - + Custom Anpassad @@ -5403,12 +5422,12 @@ Inställningssystemet är det som anges i de allmänna inställningarna. Gui::Dialog::DlgUnitsCalculator - + unknown unit: okänd enhet: - + unit mismatch enhet matchar inte @@ -7292,7 +7311,7 @@ Hur vill du fortsätta? Gui::PropertyEditor::LinkLabel - + Change the linked object Ändra det länkade objektet @@ -7300,12 +7319,12 @@ Hur vill du fortsätta? Gui::PropertyEditor::LinkSelection - + Error Fel - + Object not found Objekt hittades inte @@ -8352,22 +8371,22 @@ Vill du ange en annan katalog? Gui::View3DInventor - + Export PDF Exportera PDF - + PDF file PDF-fil - + Opening file failed Fel vid filöppning - + Can't open file '%1' for writing. Kan inte öppna filen '%1' för skrivning. @@ -9228,12 +9247,12 @@ Please open a browser window and type in: http://localhost:%1. Alternativ... - + Out of memory Slut på minne - + Not enough memory available to display the data. Det finns inte tillräckligt med minne för att visa datan. @@ -12148,12 +12167,12 @@ Vill du fortfarande fortsätta? ViewIsometricCmd - + Isometric Isometrisk - + Set NaviCube to Isometric mode Använd isometriskt läge för NaviKuben @@ -12161,12 +12180,12 @@ Vill du fortfarande fortsätta? ViewOrthographicCmd - + Orthographic Ortografisk - + Set View to Orthographic mode Använd ortografisk vy @@ -12174,12 +12193,12 @@ Vill du fortfarande fortsätta? ViewPerspectiveCmd - + Perspective Perspektiv - + Set View to Perspective mode Använd perspektivvy @@ -12187,12 +12206,12 @@ Vill du fortfarande fortsätta? ViewZoomToFitCmd - + Zoom to fit Anpassa storlek - + Zoom so that model fills the view Zooma så att modellen fyller vyn diff --git a/src/Gui/Language/FreeCAD_tr.qm b/src/Gui/Language/FreeCAD_tr.qm index e1d91cecf3..1def61701f 100644 Binary files a/src/Gui/Language/FreeCAD_tr.qm and b/src/Gui/Language/FreeCAD_tr.qm differ diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 7e583f37cd..544e4fb155 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kamera ayarları - + Orientation Yönlendirme - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Geçerli görünüm @@ -4169,62 +4169,77 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> Yeni belgeler için varsayılan lisans - + All rights reserved Her hakkı saklıdır - + Creative Commons Attribution Creative Commons Atıf - + Creative Commons Attribution-ShareAlike Genel yaratıcılar atıf benzer-paylaşım - + Creative Commons Attribution-NoDerivatives Genel yaratıcılar atıf-türetilemez - + Creative Commons Attribution-NonCommercial Genel yaratıcılar atıf-ticari olmayan - + Creative Commons Attribution-NonCommercial-ShareAlike Genel yaratıcı atıf-ticari olmayan-benzer paylaşım - + Creative Commons Attribution-NonCommercial-NoDerivatives Genel yaratıcılar atıf-ticari olmayan-türetilemez - + Public Domain Halka Açık Alan - + FreeArt ÖzgürSanat - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Diğer - + License URL Lisans URL (Automatic Translation) - + URL describing more about the license Lisans hakkında daha fazlasını anlatan URL @@ -4232,17 +4247,17 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Kullanılacak tarih biçimi. - + Default Varsayılan - + Format Biçim @@ -4726,7 +4741,6 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> - Corner where navigation cube is shown Gezinme küpünün gösterildiği köşe @@ -4765,6 +4779,11 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4782,8 +4801,8 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4947,52 +4966,52 @@ Bu ayarla fareyi eğme devre dışı bırakılmaz. DokunmatikEkran eğim hareketini devre dışı bırak - + Isometric İzometrik - + Dimetric Dimetrik - + Trimetric Trimetrik - + Top üst - + Front Ön - + Left Sol - + Right Sağ - + Rear Arka - + Bottom Alt - + Custom Özel @@ -5400,12 +5419,12 @@ Tercih edilen sistem, genel tercihlerdeki tek ayardır. Gui::Dialog::DlgUnitsCalculator - + unknown unit: bilinmeyen birim: - + unit mismatch birim uyuşmazlığı @@ -7290,7 +7309,7 @@ sağ görünümde %2 nokta seçili. Gui::PropertyEditor::LinkLabel - + Change the linked object Bağlı nesneyi değiştir @@ -7298,12 +7317,12 @@ sağ görünümde %2 nokta seçili. Gui::PropertyEditor::LinkSelection - + Error Hata - + Object not found Nesne bulunamadı @@ -8349,22 +8368,22 @@ Başka bir dizin belirlemek ister misiniz? Gui::View3DInventor - + Export PDF PDF olarak dışa aktar - + PDF file PDF dosyası - + Opening file failed Dosya açılamadı - + Can't open file '%1' for writing. Dosya '%1' yazmak için açılamıyor. @@ -9220,12 +9239,12 @@ Please open a browser window and type in: http://localhost:%1. Seçenekler... - + Out of memory Yetersiz bellek - + Not enough memory available to display the data. Verileri görüntülemek için yetersiz bellek. @@ -12141,12 +12160,12 @@ Hala ilerlemek istiyor musunuz? ViewIsometricCmd - + Isometric İzometrik - + Set NaviCube to Isometric mode NaviKüp'ü izometrik moda ayarla @@ -12154,12 +12173,12 @@ Hala ilerlemek istiyor musunuz? ViewOrthographicCmd - + Orthographic Ortografik - + Set View to Orthographic mode Görüntüyü ortografik moda ayarla @@ -12167,12 +12186,12 @@ Hala ilerlemek istiyor musunuz? ViewPerspectiveCmd - + Perspective Perspektif - + Set View to Perspective mode Görüntüyü perspektif moduna ayarla @@ -12180,12 +12199,12 @@ Hala ilerlemek istiyor musunuz? ViewZoomToFitCmd - + Zoom to fit Sığacak şekilde yakınlaştır - + Zoom so that model fills the view Modeli görünümü dolduracak şekilde yakınlaştır diff --git a/src/Gui/Language/FreeCAD_uk.qm b/src/Gui/Language/FreeCAD_uk.qm index d1498b5db9..26d4fc0f69 100644 Binary files a/src/Gui/Language/FreeCAD_uk.qm and b/src/Gui/Language/FreeCAD_uk.qm differ diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 7b4dd6b058..d421568603 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -758,37 +758,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Налаштування камери - + Orientation Орієнтація - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Поточний вид @@ -4170,62 +4170,77 @@ You can also use the form: John Doe <john@doe.com> Типова Ліцензія для нових документів - + All rights reserved Усі права захищені - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Суспільне надбання - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Інші - + License URL URL ліцензії - + URL describing more about the license URL, що описує більше про ліцензію @@ -4233,17 +4248,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. Формат дати, яка використовується. - + Default За замовчуванням - + Format Формат @@ -4727,7 +4742,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Визначає кут екрану з навігаційним кубом @@ -4766,6 +4780,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Назва шрифту: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4783,8 +4802,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4948,52 +4967,52 @@ Mouse tilting is not disabled by this setting. Вимкнути реакцію на нахил екрану - + Isometric Ізометричний - + Dimetric Диметрія - + Trimetric Триметрія - + Top Згори - + Front Фронтальний - + Left Ліворуч - + Right Направо - + Rear Ззаду - + Bottom Знизу - + Custom Підлаштувати @@ -5401,12 +5420,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: невідома одиниця вимірювання: - + unit mismatch невідповідність одиниць вимірювання @@ -7289,7 +7308,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Заміна звʼязаного обʼєкта @@ -7297,12 +7316,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Помилка - + Object not found Обʼєкт не знайдено @@ -8349,22 +8368,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Експорт в PDF - + PDF file PDF-файл - + Opening file failed Відкриття файлу не вдалося - + Can't open file '%1' for writing. Не вдалося відкрити файл '%1' для запису. @@ -9225,12 +9244,12 @@ Please open a browser window and type in: http://localhost:%1. Параметри... - + Out of memory Не вистачає памʼяті - + Not enough memory available to display the data. Недостатньо памʼяті для показу даних. @@ -12148,12 +12167,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Ізометричний - + Set NaviCube to Isometric mode Встановити NaviCube в ізометричний режим перегляду @@ -12161,12 +12180,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ортогональний - + Set View to Orthographic mode Встановити ортогональний режим перегляду @@ -12174,12 +12193,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Перспектива - + Set View to Perspective mode Встановити перспективний режим перегляду @@ -12187,12 +12206,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Повністю вмістити у вікно перегляду - + Zoom so that model fills the view Показати модель повністю diff --git a/src/Gui/Language/FreeCAD_val-ES.qm b/src/Gui/Language/FreeCAD_val-ES.qm index 179180eafb..fb9404b856 100644 Binary files a/src/Gui/Language/FreeCAD_val-ES.qm and b/src/Gui/Language/FreeCAD_val-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index b15e51e532..3e7891eec8 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Paràmetres de la càmera - + Orientation Orientació - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -4166,62 +4166,77 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> La llicència per defecte per als documents nous - + All rights reserved Tots els drets reservats - + Creative Commons Attribution Creative Commons Reconeixement - + Creative Commons Attribution-ShareAlike Creative Commons Reconeixement-CompartirIgual - + Creative Commons Attribution-NoDerivatives Creative Commons Reconeixement-SenseObraDerivada - + Creative Commons Attribution-NonCommercial Creative Commons Reconeixement-NoComercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Reconeixement-NoComercial-CompartirIgual - + Creative Commons Attribution-NonCommercial-NoDerivatives Llicència Creative Commons Reconeixement-NoComercial-SenseObraDerivada - + Public Domain Domini públic - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Altres - + License URL URL de la llicència - + URL describing more about the license URL que descriu més informació sobre la llicència @@ -4229,17 +4244,17 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. El format de la data que s'ha d'utilitzar. - + Default Per defecte - + Format Format @@ -4723,7 +4738,6 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> - Corner where navigation cube is shown Cantó on es mostra el cub de navegació @@ -4762,6 +4776,11 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4779,8 +4798,8 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4942,52 +4961,52 @@ Mouse tilting is not disabled by this setting. Desactiva el gest d'inclinació de la pantalla tàctil - + Isometric Isomètric - + Dimetric Dimètric - + Trimetric Trimètric - + Top Planta - + Front Alçat - + Left Esquerra - + Right Dreta - + Rear Posterior - + Bottom Inferior - + Custom Personalitzat @@ -5394,12 +5413,12 @@ El sistema de preferències és el fixat en les preferències generals. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unknown unit: - + unit mismatch la unitat no coincideix @@ -7280,7 +7299,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Canvia l'objecte enllaçat @@ -7288,12 +7307,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Error - + Object not found No s'ha trobat l'objecte. @@ -8335,22 +8354,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exporta a PDF - + PDF file Fitxer PDF - + Opening file failed No s'ha pogut obrir el fitxer. - + Can't open file '%1' for writing. No s'ha pogut obrir el fitxer '%1' per a escriure-hi. @@ -9206,12 +9225,12 @@ Please open a browser window and type in: http://localhost:%1. Opcions... - + Out of memory No hi ha prou memòria. - + Not enough memory available to display the data. No hi ha prou memòria disponible per a mostrar les dades. @@ -12128,12 +12147,12 @@ Encara voleu continuar? ViewIsometricCmd - + Isometric Isomètric - + Set NaviCube to Isometric mode Estableix NaviCube en el mode isomètric @@ -12141,12 +12160,12 @@ Encara voleu continuar? ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Estableix la visualització al mode ortogonal @@ -12154,12 +12173,12 @@ Encara voleu continuar? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Defineix la visualització en mode de perspectiva @@ -12167,12 +12186,12 @@ Encara voleu continuar? ViewZoomToFitCmd - + Zoom to fit Zoom per a encabir - + Zoom so that model fills the view Zoom perquè el model òmpliga la visualització diff --git a/src/Gui/Language/FreeCAD_vi.qm b/src/Gui/Language/FreeCAD_vi.qm index 57d3c00c3b..3ab421e60d 100644 Binary files a/src/Gui/Language/FreeCAD_vi.qm and b/src/Gui/Language/FreeCAD_vi.qm differ diff --git a/src/Gui/Language/FreeCAD_vi.ts b/src/Gui/Language/FreeCAD_vi.ts index 4d6961570f..d43208b072 100644 --- a/src/Gui/Language/FreeCAD_vi.ts +++ b/src/Gui/Language/FreeCAD_vi.ts @@ -758,37 +758,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Cài đặt máy ảnh - + Orientation Sự định hướng - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Ô xem hiện tại @@ -4175,62 +4175,77 @@ You can also use the form: John Doe <john@doe.com> Default license for new documents - + All rights reserved Đã đăng ký Bản quyền - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Phạm vi công cộng - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Khác - + License URL Đường dẫn URL Giấy phép - + URL describing more about the license URL describing more about the license @@ -4238,17 +4253,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. The format of the date to use. - + Default Mặc định - + Format Format @@ -4732,7 +4747,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Corner where navigation cube is shown @@ -4771,6 +4785,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4788,8 +4807,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4953,52 +4972,52 @@ Mouse tilting is not disabled by this setting. Disable touchscreen tilt gesture - + Isometric Isometric - + Dimetric Dimetric - + Trimetric Trimetric - + Top Đỉnh - + Front Phía trước - + Left Trái - + Right Phải - + Rear Phía sau - + Bottom Đáy - + Custom Tùy chọn @@ -5406,12 +5425,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unknown unit: - + unit mismatch unit mismatch @@ -7297,7 +7316,7 @@ Bạn muốn tiến hành như thế nào? Gui::PropertyEditor::LinkLabel - + Change the linked object Thay đổi đối tượng được liên kết @@ -7305,12 +7324,12 @@ Bạn muốn tiến hành như thế nào? Gui::PropertyEditor::LinkSelection - + Error Lỗi - + Object not found Không tìm thấy đối tượng @@ -8357,22 +8376,22 @@ Bạn có muốn chỉ định thư mục khác không? Gui::View3DInventor - + Export PDF Xuất tệp PDF - + PDF file Tệp PDF - + Opening file failed Không thể mở tệp - + Can't open file '%1' for writing. Không thể mở tệp '% 1' để viết. @@ -9233,12 +9252,12 @@ Hãy mở cửa sổ trình duyệt và nhập: http://localhost:%1.Tùy chọn... - + Out of memory Thiếu bộ nhớ - + Not enough memory available to display the data. Không đủ bộ nhớ để hiển thị dữ liệu. @@ -12155,12 +12174,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Isometric - + Set NaviCube to Isometric mode Set NaviCube to Isometric mode @@ -12168,12 +12187,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Orthographic - + Set View to Orthographic mode Set View to Orthographic mode @@ -12181,12 +12200,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Phối cảnh - + Set View to Perspective mode Set View to Perspective mode @@ -12194,12 +12213,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Phóng vừa khít - + Zoom so that model fills the view Phóng cho mô hình vừa khít với ô xem diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 5c843cc80a..9a0a4df0b9 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 8fe7dcbe78..7cfa7af925 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings 相机设置 - + Orientation 方向 - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 当前视图 @@ -4160,62 +4160,77 @@ You can also use the form: John Doe <john@doe.com> 新文档的默认许可证 - + All rights reserved 版权所有 - + Creative Commons Attribution 创建通用属性 - + Creative Commons Attribution-ShareAlike 知识共享 署名-相同方式共享 - + Creative Commons Attribution-NoDerivatives 知识共享 署名-禁止演绎 - + Creative Commons Attribution-NonCommercial 知识共享 署名-非商业性使用 - + Creative Commons Attribution-NonCommercial-ShareAlike 知识共享 署名-非商业性使用-相同方式共享 - + Creative Commons Attribution-NonCommercial-NoDerivatives 知识共享 署名-非商业性使用-禁止演绎 - + Public Domain 公共域 - + FreeArt 自由艺术 - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other 其它 - + License URL 许可证网址 - + URL describing more about the license 更多关于许可证的 URL @@ -4223,17 +4238,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. 要使用的日期格式。 - + Default 默认 - + Format 格式 @@ -4717,7 +4732,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown 显示导航立方体的角落 @@ -4756,6 +4770,11 @@ You can also use the form: John Doe <john@doe.com> Font name: 字体名称: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4773,8 +4792,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4937,52 +4956,52 @@ Mouse tilting is not disabled by this setting. 禁用触摸屏倾斜手势 - + Isometric 等轴测 - + Dimetric 二轴测 - + Trimetric 三轴测 - + Top 俯视 - + Front 前视 - + Left 左视 - + Right 右视 - + Rear 后视 - + Bottom 底视 - + Custom 自定义 @@ -5389,12 +5408,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: 未知单位： - + unit mismatch 单位不匹配 @@ -7275,7 +7294,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object 更改链接的对象 @@ -7283,12 +7302,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error 错误 - + Object not found 未发现物件 @@ -8333,22 +8352,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF 导出PDF - + PDF file PDF 文件 - + Opening file failed 打开文件失败 - + Can't open file '%1' for writing. 无法打开文件“%1”进行写入。 @@ -9206,12 +9225,12 @@ Please open a browser window and type in: http://localhost:%1. 选项... - + Out of memory 内存不足 - + Not enough memory available to display the data. 没有足够的可用内存来显示数据. @@ -12127,12 +12146,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric 等轴测 - + Set NaviCube to Isometric mode 将导航立方体设置为等距模式 @@ -12140,12 +12159,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 正交投影 - + Set View to Orthographic mode 将视图设置为正交模式 @@ -12153,12 +12172,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 透视 - + Set View to Perspective mode 将视图设置为透视模式 @@ -12166,12 +12185,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit 缩放到适合窗口大小 - + Zoom so that model fills the view 缩放以使模型填充视图 diff --git a/src/Gui/Language/FreeCAD_zh-TW.qm b/src/Gui/Language/FreeCAD_zh-TW.qm index d508b9c098..e482c4da10 100644 Binary files a/src/Gui/Language/FreeCAD_zh-TW.qm and b/src/Gui/Language/FreeCAD_zh-TW.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index dbf1123006..0ac4b3823c 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -757,37 +757,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings 相機視角設定 - + Orientation 定位 - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 目前視角 @@ -4163,62 +4163,77 @@ You can also use the form: John Doe <john@doe.com> Default license for new documents - + All rights reserved 版權所有 - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain 公眾領域 - + FreeArt 自由藝術 - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other 其他 - + License URL 授權連結 - + URL describing more about the license URL describing more about the license @@ -4226,17 +4241,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. The format of the date to use. - + Default 預設 - + Format Format @@ -4720,7 +4735,6 @@ You can also use the form: John Doe <john@doe.com> - Corner where navigation cube is shown Corner where navigation cube is shown @@ -4759,6 +4773,11 @@ You can also use the form: John Doe <john@doe.com> Font name: Font name: + + + Font name of the navigation cube + Font name of the navigation cube + Cube size @@ -4776,8 +4795,8 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> - <html><head/><body><p>Font size for the NaviCube text</p></body></html> + Font size of the navigation cube + Font size of the navigation cube @@ -4941,52 +4960,52 @@ Mouse tilting is not disabled by this setting. Disable touchscreen tilt gesture - + Isometric 等角立體 - + Dimetric 二等角立體 - + Trimetric 不等角立體 - + Top 上視圖 - + Front 前視圖 - + Left 左視圖 - + Right 右視圖 - + Rear 後視圖 - + Bottom 底視圖 - + Custom 自訂 @@ -5394,12 +5413,12 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unknown unit: - + unit mismatch unit mismatch @@ -7281,7 +7300,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Change the linked object @@ -7289,12 +7308,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error 錯誤 - + Object not found 未發現物件 @@ -8337,22 +8356,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF 匯出 PDF - + PDF file PDF 檔 - + Opening file failed 開啟檔案失敗 - + Can't open file '%1' for writing. 無法開啟並寫入檔案 '%1' @@ -9208,12 +9227,12 @@ Please open a browser window and type in: http://localhost:%1. 選項 ... - + Out of memory 記憶體不足 - + Not enough memory available to display the data. 沒有足夠的記憶體可用來顯示資料。 @@ -12130,12 +12149,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric 等角立體 - + Set NaviCube to Isometric mode 設定導覽方塊為立體正投影模式 @@ -12143,12 +12162,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 正投影法 - + Set View to Orthographic mode 將視圖切換到正投影模式 @@ -12156,12 +12175,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 透視法 - + Set View to Perspective mode 將視角切換至透視法投影模式 @@ -12169,12 +12188,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom to fit - + Zoom so that model fills the view Zoom so that model fills the view diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm index f53ddb2260..24b5fc6a03 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts index fb5bf0af4a..ce59391158 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts @@ -11,7 +11,7 @@ Repository URL - Спасылак сховішча + URL-адрас сховішча @@ -150,7 +150,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Discussion URL - Спасылак абмеркавання + URL-адрас абмеркавання @@ -160,7 +160,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Bugtracker URL - Спасылак рэгістрацыі памылак (bugtracker) + URL-адрас рэгістрацыі памылак (bugtracker) @@ -189,7 +189,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore README URL - Спасылак README + URL-адрас README @@ -199,17 +199,17 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Repository URL - Спасылак сховішча + URL-адрас сховішча Website URL - Спасылак на сайт + URL-адрас на інтэрнет-сайт Documentation URL - Спасылак на дакументацыю + URL-адрас на дакументацыю @@ -661,7 +661,7 @@ installed addons will be checked for available updates Show option to change branches (requires git) - Адлюстраваць наладу змены галіны (патрабуецца git) + Паказаць наладу змены галіны (патрабуецца git) @@ -671,7 +671,7 @@ installed addons will be checked for available updates Activate Addon Manager options intended for developers of new Addons. - Актываваць налады Кіравання дадаткамі, якія прызначаныя для распрацоўкі новых дадаткаў. + Задзейнічаць налады Кіравання дадаткамі, якія прызначаныя для распрацоўкі новых дадаткаў. @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Абнавіць @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Папярэджанне Кіравання дадаткамі: Не атрымалася імпартаваць QtWebEngineWidgets. Кіраванне пакетамі вашай сістэмы можа даць пакет для гэтай залежнасці, знайдзіце ў кіраўніку пакетаў магчымыя дазволы. Адлюстраванне README пакету будзе абмежаваны, пакуль гэтая залежнасць не будзе ліквідаваная. - + Version {version} installed on {date} Версія {version} усталяваная {date} - + Version {version} installed Версія {version} усталяваная - + Installed on {date} Дата ўсталявання {date} - + @@ -1393,162 +1393,162 @@ installed addons will be checked for available updates Усталявана - + On branch {}, update available to version У галіне {}, даступна абнаўленне да версіі - + Update available to version Абнаўленне даступна да версіі - + An update is available Даступна абнаўленне - + Git tag '{}' checked out, no updates possible Метка Git'{}' праверана, абнаўленняў няма - + This is the latest version available for branch {} Гэта апошняя даступная версія для галіны {} - + Updated, please restart FreeCAD to use Абноўлена, калі ласка перазапусціце FreeCAD, каб ужыць - + Update check in progress Выконваецца праверка абнаўленняў - + Automatic update checks disabled Аўтаматычная праверка абнаўленняў адключана - + Installation location Месцазнаходжанне ўстаноўкі - + WARNING: This addon is obsolete УВАГА: Гэта дадатак састарэлы - + WARNING: This addon is Python 2 Only УВАГА: Гэты дадатак толькі для Python 2 - + WARNING: This addon requires FreeCAD УВАГА: Гэты дадатак патрабуе FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. УВАГА: Гэты дадатак у бягучы час усталяваны, але адключаны. Націснуць кнопку 'Уключыць', каб зноў уключыць яго. - - + + No URL or wiki page provided by this macro - Гэты макрас не дае спасылкі URL ці вікі-старонкі + Гэты макрас не дае URL-адрас ці вікі-старонкі - + Could not load README data from URL {} - Не атрымалася загрузіць дадзеныя README з спасылка URL {} + Не атрымалася загрузіць дадзеныя README з URL-адрасам {} - + This Addon will be enabled next time you restart FreeCAD. Гэты Дадатак будзе ўключаны пры наступным перазапуску FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Гэты Дадатак будзе адключаны пры наступным перазапуску FreeCAD. - + Success Паспяхова завершана - + Branch change succeeded, please restart to use the new version. Змена галіны прайшло паспяхова, калі ласка, перазапусціце, каб ужыць новую версію. - + Changed to git ref '{}' -- please restart to use Addon. Зменены на git ref '{}' -- калі ласка, перазапусціце, каб ужыць Дадатак. - + Page JavaScript reported Заяўленая старонка JavaScript - + Install Усталяваць - + Uninstall Выдаліць - + Check for Update Праверыць наяўнасць абнаўлення - + Run Macro Выканаць макрас - + Change Branch Змяніць галіну - + Enable Уключыць - + Disable Адключыць - + Return to package list Вярнуцца да спісу пакетаў - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. Прывязкі QtWebEngine Python не ўстаноўленыя - ужываецца рэзервовае адлюстраванне README. Падрабязныя звесткі і інструкцыі па ўсталёўцы, глядзіце ў Праглядзе справаздачы. - + The page is taking a long time to load... showing the data we have so far... - Загрузка старонкі займае шмат часу... адлюстроўваюцца дадзеныя, якія ёсць на дадзены момант... + Загрузка старонкі займае шмат часу... паказваюцца дадзеныя, якія ёсць на дадзены момант... @@ -1843,7 +1843,7 @@ installed addons will be checked for available updates Invalid metadata in file {} - Недапушчальныя метададзеныя ў файле {} + Хібныя метададзеныя ў файле {} @@ -1858,7 +1858,7 @@ installed addons will be checked for available updates Class - Поле допуску + Поле дакладнасці @@ -1947,7 +1947,7 @@ installed addons will be checked for available updates Filter regular expression is invalid - Рэгулярны выраз фільтра недапушчальны + Хібны рэгулярны выраз фільтра @@ -2212,7 +2212,7 @@ installed addons will be checked for available updates Unable to open macro code URL {} - Не атрымалася адчыніць спасылак URL {} коду макраса + Не атрымалася адчыніць URL-адрас {} коду макраса @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Не атрымалася знайсці паказаны файл макраса {} (павінен знаходзіцца ў {}) - + {}: Unrecognized internal workbench '{}' {}: Непрызнаны ўнутраны варштат '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - Папярэджанне распрацоўкі дадатку: спасылак сховішча, які ўсталяваны ў файле package.xml для дадатку {} ({}) не адпавядае спасылку, з якога ён быў выняты ({}) + Папярэджанне распрацоўкі дадатку: URL-адрас сховішча, які ўсталяваны ў файле package.xml для дадатку {} ({}) не адпавядае спасылку, з якога ён быў выняты ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Папярэджанне распрацоўкі дадатку: галіна сховішча, якая ўсталявана ў файле package.xml для дадатку {} ({}) не адпавядае галіне, з якой яна была вынята ({}) @@ -2397,7 +2397,7 @@ installed addons will be checked for available updates Repository URL Preferences header for custom repositories - Спасылак сховішча + URL-адрас сховішча diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm index 6feb6886f8..d53170095d 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts index 53debde1d4..7416a163a7 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -6,17 +6,17 @@ Custom repository - Custom repository + Personalitza el repositori Repository URL - Repository URL + URL del repositori Branch - Branch + Branca @@ -34,7 +34,7 @@ <b>Package Name</b> - <b>Package Name</b> + <b>Nom del paquet</b> @@ -49,7 +49,7 @@ UpdateAvailable - UpdateAvailable + Actualització disponible @@ -57,12 +57,12 @@ Dependencies - Dependencies + Dependències Dependency type - Dependency type + Tipus de dependència @@ -72,7 +72,7 @@ Optional? - Optional? + Opcional? @@ -81,31 +81,31 @@ Resolve Dependencies - Resolve Dependencies + Resol les dependències This Addon has the following required and optional dependencies. You must install them before this Addon can be used. Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. - This Addon has the following required and optional dependencies. You must install them before this Addon can be used. + Aquest complement té les dependències requerides i opcionals següents. Les heu d'instal·lar abans que es pugui utilitzar el complement. -Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. +Voleu que el gestor de complements les instal·li automàticament? Trieu "Ignora" per a instal·lar el complement sense instal·lar les dependències. FreeCAD Addons - FreeCAD Addons + Complements del FreeCAD Required Python modules - Required Python modules + Mòduls Python necessaris Optional Python modules - Optional Python modules + Mòduls Python opcionals @@ -113,7 +113,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Developer Tools - Addon Developer Tools + Eines per a desenvolupadors del complement @@ -124,23 +124,23 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Browse... - Browse... + Navega... Metadata - Metadata + Metadades Primary branch - Primary branch + Branca primària Explanation of what this Addon provides. Displayed in the Addon Manager. It is not necessary for this to state that this is a FreeCAD Addon. - Explanation of what this Addon provides. Displayed in the Addon Manager. It is not necessary for this to state that this is a FreeCAD Addon. + Explicació del que proporciona aquest complement. Es mostra al gestor de complements. Pot ser que no hi digui que es tracta d'un complement del FreeCAD. @@ -165,12 +165,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported - Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported + Estils semàntics (1.2.3-beta) o CalVer (2022.08.30) compatibles Set to today (CalVer style) - Set to today (CalVer style) + Estableix a avui (estil CalVer) @@ -178,13 +178,13 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore (Optional) - (Optional) + (Opcional) Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD", and must be a valid directory name on all support operating systems. - Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD", and must be a valid directory name on all support operating systems. + Es mostra a la llista de complements del gestor de complements. No hauria d'incloure la paraula "FreeCAD", i ha de ser un nom de directori vàlid en tots els sistemes operatius compatibles. @@ -199,7 +199,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Repository URL - Repository URL + URL del repositori @@ -277,27 +277,27 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Update all Addons - Update all Addons + Actualitza tots els complements Check for updates - Check for updates + Comprova si hi ha actualitzacions View and update Python package dependencies - View and update Python package dependencies + Visualitza i actualitza les dependències dels paquets Python Python dependencies... - Python dependencies... + Dependències en Python... Developer tools... - Developer tools... + Eines per a desenvolupadors... @@ -312,12 +312,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Edit Tags - Edit Tags + Edita les etiquetes Comma-separated list of tags describing this item: - Comma-separated list of tags describing this item: + Llista d'etiquetes separades per comes que descriuen aquest element: @@ -327,7 +327,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Welcome to the Addon Manager - Welcome to the Addon Manager + Us donem la benvinguda al gestor de complements @@ -433,7 +433,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore (tags) - (tags) + (etiquetes) @@ -448,7 +448,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore UpdateAvailable - UpdateAvailable + Actualització disponible @@ -462,7 +462,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Licenses - Licenses + Llicències @@ -472,7 +472,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore License file - License file + Fitxer de llicència @@ -482,7 +482,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Kind - Kind + Tipus @@ -492,7 +492,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Email - Email + Correu electrònic @@ -500,7 +500,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Advanced Version Mapping - Advanced Version Mapping + Mapatge avançat de versions @@ -510,12 +510,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore FreeCAD Version - FreeCAD Version + Versió del FreeCAD Best-available branch, tag, or commit - Best-available branch, tag, or commit + Millor branca, etiqueta o publicació disponible @@ -523,12 +523,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Supported FreeCAD Versions - Supported FreeCAD Versions + Versions del FreeCAD admeses Minimum FreeCAD Version Supported - Minimum FreeCAD Version Supported + Versió mínima de FreeCAD admesa @@ -539,7 +539,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Maximum FreeCAD Version Supported - Maximum FreeCAD Version Supported + Versió màxima del FreeCAD admesa @@ -581,17 +581,17 @@ installed addons will be checked for available updates Manual (no automatic updates) - Manual (no automatic updates) + Manual (sense actualitzacions automàtiques) Daily - Daily + Diàriament Weekly - Weekly + Setmanalment @@ -656,7 +656,7 @@ installed addons will be checked for available updates Advanced Options - Advanced Options + Opcions avançades @@ -694,12 +694,12 @@ installed addons will be checked for available updates Install - Install + Instal·la Uninstall - Uninstall + Desinstal·la @@ -770,7 +770,7 @@ installed addons will be checked for available updates TextLabel - Etiqueta de Text + Etiqueta de text @@ -838,7 +838,7 @@ installed addons will be checked for available updates Browse... - Browse... + Navega... @@ -893,12 +893,12 @@ installed addons will be checked for available updates FreeCAD Versions... - FreeCAD Versions... + Versions del FreeCAD... Other Metadata - Other Metadata + Altres metadades @@ -918,12 +918,12 @@ installed addons will be checked for available updates Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported - Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported + Estils semàntics (1.2.3-beta) o CalVer (2022.08.30) compatibles Set to today (CalVer style) - Set to today (CalVer style) + Estableix a avui (estil CalVer) @@ -946,22 +946,22 @@ installed addons will be checked for available updates Add a toolbar button for this macro? - Add a toolbar button for this macro? + Voleu afegir un botó a la barra d'eines per a aquesta macro? Yes - Yes + Sí No - No + No Never - Never + Mai @@ -969,12 +969,12 @@ installed addons will be checked for available updates Change Branch - Change Branch + Canvia la branca Change to branch or tag: - Change to branch or tag: + Canvia a la branca o l'etiqueta: @@ -982,17 +982,17 @@ installed addons will be checked for available updates Copyright Information - Copyright Information + Informació dels drets d'autor Copyright holder: - Copyright holder: + Titular dels drets d'autor: Copyright year: - Copyright year: + Any dels drets d'autor: @@ -1000,7 +1000,7 @@ installed addons will be checked for available updates Add Person - Add Person + Afegeix una persona @@ -1015,12 +1015,12 @@ installed addons will be checked for available updates Email: - Email: + Correu electrònic: Email is required for maintainers, and optional for authors. - Email is required for maintainers, and optional for authors. + El correu electrònic és obligatori per als mantenidors i opcional per als autors. @@ -1058,12 +1058,12 @@ installed addons will be checked for available updates Username - Username + Nom d'usuari Password - Password + Contrasenya @@ -1071,17 +1071,17 @@ installed addons will be checked for available updates Select a license - Select a license + Selecciona una llicència About... - About... + Quant a... License name: - License name: + Nom de la llicència: @@ -1096,7 +1096,7 @@ installed addons will be checked for available updates Browse... - Browse... + Navega... @@ -1136,22 +1136,22 @@ installed addons will be checked for available updates Add a toolbar button for this macro? - Add a toolbar button for this macro? + Voleu afegir un botó a la barra d'eines per a aquesta macro? Yes - Yes + Sí No - No + No Never - Never + Mai @@ -1203,12 +1203,12 @@ installed addons will be checked for available updates Restart now - Restart now + Reinicia ara Restart later - Restart later + Reinicia més tard @@ -1219,7 +1219,7 @@ installed addons will be checked for available updates Updating cache... - Updating cache... + S'està actualitzant la memòria cau... @@ -1289,14 +1289,14 @@ installed addons will be checked for available updates - + Update Actualitza Updating... - Updating... + S'està actualitzant... @@ -1367,25 +1367,25 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. + Avís del gestor de complements: No s'ha pogut importar el QtWebEngineWidgets. El gestor de paquets del sistema pot proporcionar un paquet per a aquesta dependència, cerqueu al gestor de paquets per a possibles resolucions. La visualització del paquet README es limitarà fins que es resolgui aquesta dependència. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install - Install + Instal·la - + Uninstall - Uninstall + Desinstal·la - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch - Change Branch + Canvia la branca - + Enable Habilita - + Disable Desactiva - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -1651,7 +1651,7 @@ installed addons will be checked for available updates Yes - Yes + Sí @@ -2100,7 +2100,7 @@ installed addons will be checked for available updates Branch git terminology - Branch + Branca @@ -2112,7 +2112,7 @@ installed addons will be checked for available updates Kind Table header for git ref type (e.g. either Tag or Branch) - Kind + Tipus @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) @@ -2397,7 +2397,7 @@ installed addons will be checked for available updates Repository URL Preferences header for custom repositories - Repository URL + URL del repositori diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index 3ce34eccd6..8df8229d00 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Aktualizovat @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable Povolit - + Disable Vypnout - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm index 0f3698e2f4..96a40d48e7 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 7fc2c5eb45..ea10d7f314 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -1217,7 +1217,7 @@ installed addons will be checked for available updates Updating cache... - Updating cache... + Cache wird aktualisiert... @@ -1287,7 +1287,7 @@ installed addons will be checked for available updates - + Update Aktualisieren @@ -1368,22 +1368,22 @@ installed addons will be checked for available updates Addon Manager Warnung: QtWebEngineWidgets konnten nicht importiert werden. Der Paketmanager kann ein Paket für diese Abhängigkeit bereitstellen, durchsuche den Paketmanager nach möglichen Lösungen. Die Anzeige des Paketes README wird begrenzt, bis die Abhängigkeit behoben ist. - + Version {version} installed on {date} Version {version} installiert am {date} - + Version {version} installed Version {version} installiert - + Installed on {date} Installiert am {date} - + @@ -1391,160 +1391,160 @@ installed addons will be checked for available updates Installiert - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update verfügbar auf Version - + An update is available Ein Update ist verfügbar - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} Dies ist die neueste verfügbare Version für den Zweig {} - + Updated, please restart FreeCAD to use Aktualisiert, bitte FreeCAD zur Nutzung neu starten - + Update check in progress Prüfung der Aktualisierung läuft - + Automatic update checks disabled Automatische Überprüfung der Aktualisierungen deaktiviert - + Installation location Speicherort für die Installation - + WARNING: This addon is obsolete WARNUNG: Dieses Addon ist veraltet - + WARNING: This addon is Python 2 Only WARNUNG: Dieses Addon ist nur für Python 2 - + WARNING: This addon requires FreeCAD WARNUNG: Dieses Addon benötigt FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. Dieses Addon wird beim nächsten Neustart von FreeCAD aktiviert. - + This Addon will be disabled next time you restart FreeCAD. Dieses Addon wird beim nächsten Neustart von FreeCAD deaktiviert. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Installieren - + Uninstall Deinstallieren - + Check for Update Auf Aktualisierungen prüfen - + Run Macro Makro ausführen - + Change Branch Git-Branch wechseln - + Enable Aktivieren - + Disable Deaktivieren - + Return to package list Zurück zur Paketliste - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -1577,17 +1577,17 @@ installed addons will be checked for available updates Other... For providing a license other than one listed - Other... + Andere... Select the corresponding license file in your Addon - Select the corresponding license file in your Addon + Die entsprechende Lizenzdatei in Ihrem Addon auswählen Location for new license file - Location for new license file + Speicherort für neue Lizenzdatei @@ -1597,7 +1597,7 @@ installed addons will be checked for available updates Failed to install macro {} - Failed to install macro {} + Installieren des Makros {} fehlgeschlagen @@ -1670,7 +1670,7 @@ installed addons will be checked for available updates Other... - Other... + Andere... @@ -1749,7 +1749,7 @@ installed addons will be checked for available updates Cannot execute pip - Cannot execute pip + Pip kann nicht ausgeführt werden @@ -1760,7 +1760,7 @@ installed addons will be checked for available updates Continue with installation of {} anyway? - Continue with installation of {} anyway? + Trotzdem mit der Installation von {} fortfahren? @@ -1771,17 +1771,17 @@ installed addons will be checked for available updates See Report View for detailed failure log. - See Report View for detailed failure log. + Ein detailliertes Fehlerprotokoll findet sich im Ausgabefenster. Installing Addon - Installing Addon + Addon wird installiert Installing FreeCAD Addon '{}' - Installing FreeCAD Addon '{}' + FreeCAD-Addon '{}' wird installiert @@ -1796,7 +1796,7 @@ installed addons will be checked for available updates {} was installed successfully - {} was installed successfully + {} wurde erfolgreich installiert @@ -1813,7 +1813,7 @@ installed addons will be checked for available updates Create new toolbar - Create new toolbar + Neue Symbolleiste erstellen @@ -2223,17 +2223,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) @@ -2342,7 +2342,7 @@ installed addons will be checked for available updates Caching macro code... - Caching macro code... + Makro-Code wird zwischengespeichert... diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts index d3e645974f..8829be492d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -1288,7 +1288,7 @@ installed addons will be checked for available updates - + Update Ενημέρωση @@ -1369,22 +1369,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1392,160 +1392,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Αλλαγή Κλάδου - + Enable Ενεργοποίηση - + Disable Απενεργοποίηση - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2224,17 +2224,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts index 1977c2e31c..4d260248e8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts @@ -1287,7 +1287,7 @@ los complementos instalados serán revisados por actualizaciones disponibles - + Update Actualizar @@ -1368,22 +1368,22 @@ los complementos instalados serán revisados por actualizaciones disponibles Advertencia del administrador de complementos: No se pudo importar QtWebEngineWidgets. El administrador de paquetes de tu sistema puede proporcionar un paquete para esta dependencia, busque en el administrador de paquetes posibles resoluciones. La visualización del paquete README estará limitada hasta que se resuelva esta dependencia. - + Version {version} installed on {date} Versión {version} instalada el {date} - + Version {version} installed Versión {version} instalada - + Installed on {date} Instalado el {date} - + @@ -1391,160 +1391,160 @@ los complementos instalados serán revisados por actualizaciones disponibles Instalado - + On branch {}, update available to version En la rama {}, actualización disponible a la versión - + Update available to version Actualización disponible a la versión - + An update is available Una actualización está disponible - + Git tag '{}' checked out, no updates possible Etiqueta Git '{}' marcada, no es posible actualizar - + This is the latest version available for branch {} Esta es la última versión disponible para la rama {} - + Updated, please restart FreeCAD to use Actualizado, reinicie FreeCAD para usar - + Update check in progress Comprobación de actualizaciones en progreso - + Automatic update checks disabled Comprobación de actualizaciones automáticas deshabilitada - + Installation location Ubicación de instalación - + WARNING: This addon is obsolete ATENCIÓN: Este complemento está obsoleto - + WARNING: This addon is Python 2 Only ATENCIÓN: Este complemento es sólo Python 2 - + WARNING: This addon requires FreeCAD ADVERTENCIA: Este complemento requiere FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ADVERTENCIA: Este complemento está actualmente instalado, pero desactivado. Utilice el botón 'habilitar' para reactivarlo. - - + + No URL or wiki page provided by this macro No hay URL o página wiki proporcionada por esta macro - + Could not load README data from URL {} No se pudo cargar datos README desde la URL {} - + This Addon will be enabled next time you restart FreeCAD. Este complemento se habilitará la próxima vez que reinicie FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Este complemento se desactivará la próxima vez que reinicie FreeCAD. - + Success Éxito - + Branch change succeeded, please restart to use the new version. Cambio de rama exitoso, por favor reinicie para usar la nueva versión. - + Changed to git ref '{}' -- please restart to use Addon. Cambiado a git ref '{}' -- por favor reinicie para usar Complemento. - + Page JavaScript reported Página JavaScript reportada - + Install Instalar - + Uninstall Desinstalar - + Check for Update Buscar actualizaciones - + Run Macro Ejecutar Macro - + Change Branch Cambiar Rama - + Enable Habilitar - + Disable Desactivar - + Return to package list Volver a la lista de paquetes - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. No se han instalado los bindings de Python para QtWebEngine -- usando la pantalla README alternativa. Vea el informe para más detalles e instrucciones de instalación. - + The page is taking a long time to load... showing the data we have so far... La página está tardando mucho en cargar... mostrando los datos que tenemos hasta ahora... @@ -2223,17 +2223,17 @@ los complementos instalados serán revisados por actualizaciones disponibles Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index 30636ba6fc..778c62995f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -1286,7 +1286,7 @@ installed addons will be checked for available updates - + Update Actualizar @@ -1367,22 +1367,22 @@ installed addons will be checked for available updates Advertencia del administrador de complementos: No se pudo importar QtWebEngineWidgets. El administrador de paquetes de tu sistema puede proporcionar un paquete para esta dependencia, busque en el administrador de paquetes posibles resoluciones. La visualización del paquete README estará limitada hasta que se resuelva esta dependencia. - + Version {version} installed on {date} Versión {version} instalada el {date} - + Version {version} installed Versión {version} instalada - + Installed on {date} Instalado el {date} - + @@ -1390,160 +1390,160 @@ installed addons will be checked for available updates Instalado - + On branch {}, update available to version En la rama {}, actualización disponible a la versión - + Update available to version Actualización disponible a la versión - + An update is available Una actualización está disponible - + Git tag '{}' checked out, no updates possible Etiqueta Git '{}' marcada, no es posible actualizar - + This is the latest version available for branch {} Esta es la última versión disponible para la rama {} - + Updated, please restart FreeCAD to use Actualizado, reinicie FreeCAD para usar - + Update check in progress Comprobación de actualizaciones en progreso - + Automatic update checks disabled Comprobación de actualizaciones automáticas deshabilitada - + Installation location Ubicación de instalación - + WARNING: This addon is obsolete ATENCIÓN: Este complemento está obsoleto - + WARNING: This addon is Python 2 Only ATENCIÓN: Este complemento es sólo Python 2 - + WARNING: This addon requires FreeCAD ADVERTENCIA: Este complemento requiere FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ADVERTENCIA: Este complemento está actualmente instalado, pero desactivado. Utilice el botón 'habilitar' para reactivarlo. - - + + No URL or wiki page provided by this macro No hay URL o página wiki proporcionada por esta macro - + Could not load README data from URL {} No se pudo cargar datos README desde la URL {} - + This Addon will be enabled next time you restart FreeCAD. Este complemento se habilitará la próxima vez que reinicie FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Este complemento se desactivará la próxima vez que reinicie FreeCAD. - + Success Éxito - + Branch change succeeded, please restart to use the new version. Cambio de rama exitoso, por favor reinicie para usar la nueva versión. - + Changed to git ref '{}' -- please restart to use Addon. Cambiado a git ref '{}' -- por favor reinicie para usar Complemento. - + Page JavaScript reported Página JavaScript reportada - + Install Instalar - + Uninstall Desinstalar - + Check for Update Buscar actualizaciones - + Run Macro Ejecutar Macro - + Change Branch Cambiar Rama - + Enable Habilitar - + Disable Deshabilitar - + Return to package list Volver a la lista de paquetes - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. No se han instalado los bindings de Python para QtWebEngine -- usando la pantalla README alternativa. Vea el informe para más detalles e instrucciones de instalación. - + The page is taking a long time to load... showing the data we have so far... La página está tardando mucho en cargar... mostrando los datos que tenemos hasta ahora... @@ -2222,17 +2222,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index 6b632ddfd9..3f70095c50 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -1289,7 +1289,7 @@ denean gehigarrien eguneraketarik dagoen begiratuko da - + Update Eguneratu @@ -1370,22 +1370,22 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} {version} bertsioa instalatu da {date} egunean - + Version {version} installed {version} bertsioa instalatu da - + Installed on {date} Instalazio-data: {date} - + @@ -1393,160 +1393,160 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Instalatuta - + On branch {}, update available to version {} adarrean, eguneratu bertsio erabilgarria - + Update available to version Eskuragarri honako bertsioaren eguneraketa: - + An update is available Eguneraketa bat eskuragarri dago - + Git tag '{}' checked out, no updates possible '{}' git etiketa egiaztatu da, ezin da eguneratu - + This is the latest version available for branch {} Hau da eskuragarri dagoen azken bertsioa {} adarrerako - + Updated, please restart FreeCAD to use Eguneratuta, berrabiarazi FreeCAD bertsio berria erabiltzeko - + Update check in progress Eguneratzearen egiaztatzea abian - + Automatic update checks disabled Eguneratze automatikoen egiaztatzeak desgaituta - + Installation location Instalazioaren kokapena - + WARNING: This addon is obsolete ABISUA: Gehigarri hau zaharkituta dago - + WARNING: This addon is Python 2 Only ABISUA: Gehigarri hau Python 2 bertsiokoa da - + WARNING: This addon requires FreeCAD ABISUA: Gehigarri honek honakoa behar du: FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ABISUA: Gehigarri hau instalatuta dago, baina desgaituta dago. Erabili 'gaitu' botoia berriro gaitzeko. - - + + No URL or wiki page provided by this macro Makro honek ez du URLrik edo wiki-orririk - + Could not load README data from URL {} Ezin dira README datuak irakurri {} URLtik - + This Addon will be enabled next time you restart FreeCAD. Gehigarri hau FreeCAD berrabiarazten den hurrengoan gaituko da. - + This Addon will be disabled next time you restart FreeCAD. Gehigarri hau FreeCAD berrabiarazten den hurrengoan desgaituko da. - + Success Eginda - + Branch change succeeded, please restart to use the new version. Adar-aldaketa ongi gauzatu da, berrabiarazi bertsio berria erabiltzeko. - + Changed to git ref '{}' -- please restart to use Addon. '{}' git ref-ra aldatu da -- mesedez berrabiarazi gehigarria erabiltzeko. - + Page JavaScript reported JavaScript orriaren berri eman da - + Install Instalatu - + Uninstall Desinstalatu - + Check for Update Begiratu eguneraketarik dagoen - + Run Macro Exekutatu makroa - + Change Branch Aldatu adarra - + Enable Gaitu - + Disable Desgaitu - + Return to package list Itzuli pakete-zerrendara - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python loturak ez daude instalatuta -- IRAKURRI pantailaren ordezko pantaila erabiltzen. Ikusi txosten-ikuspegia xehetasunak eta instalazio-argibideak lortzeko. - + The page is taking a long time to load... showing the data we have so far... Orri honek denbora gehiago behar du kargatzeko... orain arte eskuratu diren datuak erakutsiko dira... @@ -2225,17 +2225,17 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts index 83bae7f427..c640eed585 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Päivitä @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Asenna - + Uninstall Poista asennus - + Check for Update Check for Update - + Run Macro Suorita makro - + Change Branch Vaihda haaraa - + Enable Käytä - + Disable Ota pois käytöstä - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index 62df560e75..48fc7c7c30 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -1289,7 +1289,7 @@ les mises à jour disponibles seront vérifiées pour les extensions installées - + Update Mettre à jour @@ -1370,22 +1370,22 @@ les mises à jour disponibles seront vérifiées pour les extensions installées Avertissement du gestionnaire des extensions : impossible d'importer QtWebEngineWidgets. Le gestionnaire de paquets de votre système peut fournir un paquet pour cette dépendance. Rechercher le gestionnaire de paquets pour des résolutions possibles. L'affichage du paquet README sera limité jusqu'à ce que cette dépendance soit résolue. - + Version {version} installed on {date} Version {version} installée le {date} - + Version {version} installed Version installée {version} - + Installed on {date} Installé le {date} - + @@ -1393,160 +1393,160 @@ les mises à jour disponibles seront vérifiées pour les extensions installées Installé - + On branch {}, update available to version Sur la branche {}, mise à jour disponible vers la version - + Update available to version Mise à jour disponible vers la version - + An update is available Une mise à jour est disponible - + Git tag '{}' checked out, no updates possible La balise Git '{}' a été retirée, aucune mise à jour possible - + This is the latest version available for branch {} Ceci est la dernière version disponible pour la branche {} - + Updated, please restart FreeCAD to use Mis à jour, veuillez redémarrer FreeCAD pour l’utiliser - + Update check in progress Recherche de mise à jour en cours - + Automatic update checks disabled Vérification automatique des mises à jour désactivée - + Installation location Emplacement de l’installation - + WARNING: This addon is obsolete AVERTISSEMENT : cette extension est obsolète - + WARNING: This addon is Python 2 Only AVERTISSEMENT : cette extension ne fonctionne qu'avec Python 2 - + WARNING: This addon requires FreeCAD AVERTISSEMENT : cette extension nécessite FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. AVERTISSEMENT : cette extension est actuellement installée, mais désactivée. Utilisez le bouton 'activer' pour la réactiver. - - + + No URL or wiki page provided by this macro Aucune URL ou page wiki fournie par cette macro - + Could not load README data from URL {} Impossible de charger les données README depuis l'URL {} - + This Addon will be enabled next time you restart FreeCAD. Cette extension sera activée la prochaine fois que vous redémarrerez FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Cette extension sera désactivée la prochaine fois que vous redémarrerez FreeCAD. - + Success Opération réussie - + Branch change succeeded, please restart to use the new version. Le changement de branche a réussi, veuillez redémarrer pour utiliser la nouvelle version. - + Changed to git ref '{}' -- please restart to use Addon. Changé pour la référence git '{}' -- veuillez redémarrer pour utiliser l'extension. - + Page JavaScript reported Page JavaScript signalée - + Install Installer - + Uninstall Désinstaller - + Check for Update Vérifier les mises à jour - + Run Macro Lancer la macro - + Change Branch Changer de branche - + Enable Activer - + Disable Désactiver - + Return to package list Retourner à la liste des paquets - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. Les liaisons Python de QtWebEngine ne sont pas installées -- utilisation d'un affichage README de secours. Voir la Vue rapport pour plus de détails et les instructions d'installation. - + The page is taking a long time to load... showing the data we have so far... La page prend beaucoup de temps à charger... et montre les données que nous avons jusqu'à présent... @@ -2225,17 +2225,17 @@ les mises à jour disponibles seront vérifiées pour les extensions installées Impossible de localiser le fichier {} spécifié par la macro (il aurait dû se trouver à {}) - + {}: Unrecognized internal workbench '{}' {} : atelier interne non reconnu '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Avertissement du développeur de l'extension : l'URL du répertoire défini dans le fichier package.xml pour l'extension {} ({}) ne correspond pas à l'URL depuis laquelle il a été récupéré ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Avertissement du développeur de l'extension : la branche du répertoire définie dans le fichier package.xml pour l'extension {} ({}) ne correspond pas à la branche depuis laquelle il a été récupéré ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts index 4076b3c490..657980407f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Actualizar @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Instalado - + Uninstall Desinstalar - + Check for Update Check for Update - + Run Macro Executar macro - + Change Branch Cambiar Rama - + Enable Habilitar - + Disable Inhabilitar - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts index f66832e23b..0d48c2b6fb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -1293,7 +1293,7 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja - + Update Ažuriraj @@ -1374,22 +1374,22 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1397,160 +1397,160 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Instaliraj - + Uninstall Deinstaliraj - + Check for Update Provjeri ažuriranja - + Run Macro Izvedi makronaredbu - + Change Branch Promijeni granu - + Enable Omogući - + Disable Onemogući - + Return to package list Povratak na popis paketa - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2231,17 +2231,17 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Neprepoznati interni Radni stol '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index 2217bc5e16..f4de0a2b2d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Frissítés @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Teleptés - + Uninstall Eltávolítás - + Check for Update Check for Update - + Run Macro Makró futtatás - + Change Branch Ág módosítása - + Enable Bekapcsolás - + Disable Letilt - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 8592da2508..daf6771874 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -1289,7 +1289,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili - + Update Aggiorna @@ -1370,22 +1370,22 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Avviso Addon Manager: impossibile importare QtWebEngineWidgets. Il gestore dei pacchetti di sistema's può fornire un pacchetto per questa dipendenza, cercare nel gestore dei pacchetti possibili risoluzioni. La visualizzazione del pacchetto README sarà limitata fino a quando questa dipendenza non sarà risolta. - + Version {version} installed on {date} Versione {version} installata in {date} - + Version {version} installed Versione {version} installata - + Installed on {date} Installato il {date} - + @@ -1393,160 +1393,160 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Installato - + On branch {}, update available to version Sul ramo {}, aggiornamento disponibile alla versione - + Update available to version Aggiornamento disponibile alla versione - + An update is available Un aggiornamento è disponibile - + Git tag '{}' checked out, no updates possible Git tag '{}' check out, nessun aggiornamento possibile - + This is the latest version available for branch {} Questa è l'ultima versione disponibile per il ramo {} - + Updated, please restart FreeCAD to use Aggiornato, riavviare FreeCAD per usare - + Update check in progress Controllo aggiornamento in corso - + Automatic update checks disabled Controllo automatico degli aggiornamenti disabilitato - + Installation location Percorso di installazione - + WARNING: This addon is obsolete ATTENZIONE: Questo addon è obsoleto - + WARNING: This addon is Python 2 Only ATTENZIONE: Questo addon funziona solo con Python 2 - + WARNING: This addon requires FreeCAD ATTENZIONE: Questo addon richiede FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ATTENZIONE: Questo addon è attualmente installato, ma disabilitato. Usa il pulsante 'abilita' per riabilitare. - - + + No URL or wiki page provided by this macro Nessuna pagina URL o wiki fornita da questa macro - + Could not load README data from URL {} Impossibile caricare i dati README dall'URL {} - + This Addon will be enabled next time you restart FreeCAD. Questo Addon sarà abilitato la prossima volta che riavvii FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Questo Addon sarà disabilitato al prossimo riavvio di FreeCAD. - + Success Operazione riuscita - + Branch change succeeded, please restart to use the new version. Cambio branch effettuato, riavvia l'applicazione per utilizzare la nuova versione. - + Changed to git ref '{}' -- please restart to use Addon. Cambiato in git ref '{}' -- si prega di riavviare per utilizzare Addon. - + Page JavaScript reported JavaScript della pagina segnalato - + Install Installa - + Uninstall Disinstalla - + Check for Update Controlla aggiornamenti - + Run Macro Esegui macro - + Change Branch Cambia Ramo - + Enable Abilita - + Disable Disabilita - + Return to package list Ritorna alla lista dei pacchetti - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings non installato -- si utilizza il display README di riserva. Vedere Report View per dettagli ed istruzioni di installazione. - + The page is taking a long time to load... showing the data we have so far... La pagina sta impiegando molto tempo per caricare... si visualizzano i dati che abbiamo finora... @@ -2225,17 +2225,17 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Impossibile individuare il file macro specificato {} (dovrebbe trovarsi a {}) - + {}: Unrecognized internal workbench '{}' {}: ambiente di lavoro interno non riconosciuto '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index 228bd19dce..a87f9430d7 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -1287,7 +1287,7 @@ installed addons will be checked for available updates - + Update 更新 @@ -1368,22 +1368,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1391,160 +1391,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install インストール - + Uninstall アンインストール· - + Check for Update Check for Update - + Run Macro マクロの実行 - + Change Branch ブランチの変更 - + Enable 有効 - + Disable 無効化 - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2223,17 +2223,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts index 4fbfaad690..c8d418f2ef 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update განახლება @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates დამატებების მმართველის გაფრთხილება: QtWebEngineWidgets-ის შემოტანის შეცდომა. თქვენი სისტემის პაკეტების მამართველს შეიძლება ამ დამოკიდებულებისთვის ცალკე პაკეტი გააჩნდეს. მოძებნეთ პაკეტი მასში. სანამ ამ დამოკიდებულებას არ გადაწყვეტთ, პაკეტის README ფაილის ჩვენება შეზღუდული იქნება. - + Version {version} installed on {date} დაყენებული ვერსია {version}. თარიღი {date} - + Version {version} installed დაყენებული ვერსია {version} - + Installed on {date} ინსტალაციის თარიღი {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates დაყენებულია - + On branch {}, update available to version ხელმისაწვდომი განახლება ბრენჩზე {} - + Update available to version ხელმისაწვდომია განახლება ვერსიამდე - + An update is available განახლება ხელმისაწვდომია - + Git tag '{}' checked out, no updates possible Git ჭდით '{}' შემოწმდა. განახლებები ხელმიუწვდომელია - + This is the latest version available for branch {} ეს ბრენჩის {} უახლესი ვერსიაა - + Updated, please restart FreeCAD to use განახლდა. გამოსაყენებლად გთხოვთ გადატვირთოთ FreeCAD - + Update check in progress მიმდინარეობს განახლებების შემოწმება - + Automatic update checks disabled განახლებების ავტომატური შემოწმება გამორთულია - + Installation location დაყენების ადგილი - + WARNING: This addon is obsolete გაფრთხილება: ეს დამატება მოძველებულია - + WARNING: This addon is Python 2 Only გაფრთხილება: ეს დამატება მუშაობს მხოლოდ Python v2-ზე - + WARNING: This addon requires FreeCAD გაფრთხილება: ამ დამატებას სჭირდება FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. გაფრთხილება: ეს დამატება ამჟამად დაყენებულია, მაგრამ გამორთული. ჩასართავად გამოიყენეთ 'ჩართვის' ღილაკი. - - + + No URL or wiki page provided by this macro მაკრო არ შეიცავს ბმულს ან wiki-ის გვერდს - + Could not load README data from URL {} URL {}-დან README ფაილის ჩატვირთვის შეცდომა - + This Addon will be enabled next time you restart FreeCAD. ეს დამატება მხოლოდ FreeCAD-ის მორიგი რესტარტის შემდეგ ჩაირთვება. - + This Addon will be disabled next time you restart FreeCAD. ეს დამატება მხოლოდ FreeCAD-ის მორიგი რესტარტის შემდეგ გაითიშება. - + Success წარმატება - + Branch change succeeded, please restart to use the new version. ბრენჩი წარმატებით შეიცვალა. ახალი ვერსიის გამოსაყენებლად საჭიროა გადატვირთვა. - + Changed to git ref '{}' -- please restart to use Addon. Git ref შეიცვალა '{}' - დამატებით გამოსაყენებლად გადატვირთეთ. - + Page JavaScript reported გვერდის ჯავასკრიპტის პატაკი - + Install დაყენება - + Uninstall წაშლა - + Check for Update განახლების შემოწმება - + Run Macro მაკროს გაშვება - + Change Branch ბრენჩის შეცვლა - + Enable ჩაართვა - + Disable გამორთვა - + Return to package list პაკეტების სიასთან დაბრუნება - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine-ის Python-ის ქვებიბიბლიოთეკები დაყენებული არაა -- გამოიყენენება README-ს ჩვენება. დეტალებისთვის და დაყენების ინსტრუქციებისთვს იხილეთ ანგარიშის ხედი. - + The page is taking a long time to load... showing the data we have so far... გვერდის ჩატვირთვას მეტისმეტად დიდი დრო სჭირდება... ნაჩვენები იქნება მონაცემები, რისი მიღებაც მოვასწარით... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates მაკროს მიერ მითითებული ფაილის {} შექმნა შეუძლებელია (უნდა ყოფილიყო {}) - + {}: Unrecognized internal workbench '{}' {}: უცნობი შიდა სამუშაო დაფა '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) დამატების პროგრამისტის გაფრთხილება: რეპოს URL, რომელიც დაყენებულია დამატების {} ({}) package.xml ფაილში, არ ემთხვევა URL-ს, საიდანაც ის გადმოვწერეთ ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) დამატების პროგრამისტის გაფრთხილება: რეპოს ბრენჩი, რომელიც დაყენებულია დამატების {} ({}) package.xml ფაილში, არ ემთხვევა ბრენჩს, საიდანაც ის გადმოვწერეთ ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts index 7b25fc8df4..f726e0c1e0 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update 업데이트 @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable 활성화 - + Disable Disable - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index b5e390c47c..69675b0ee7 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Update @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Installeren - + Uninstall De-installeren - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable Schakel in - + Disable Uitschakelen - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index 0cd3ae1d1e..911f23c6bb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -1288,7 +1288,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji - + Update Aktualizuj @@ -1369,22 +1369,22 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Ostrzeżenie Menedżera Dodatków: Nie można zaimportować QtWebEngineWidgets. Twój systemowy menedżer pakietów może dostarczyć pakiet dla tej zależności, przeszukaj menedżera pakietów w poszukiwaniu możliwych rozwiązań. Wyświetlanie README pakietu będzie ograniczone do czasu rozwiązania tej zależności. - + Version {version} installed on {date} Wersja {version} została zainstalowana: {date} - + Version {version} installed Wersja {version} zainstalowana - + Installed on {date} Data instalacji {date} - + @@ -1392,160 +1392,160 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Zainstalowano - + On branch {}, update available to version W gałęzi {}, aktualizacja dostępna do wersji - + Update available to version Aktualizacja dostępna do wersji - + An update is available Dostępna jest aktualizacja - + Git tag '{}' checked out, no updates possible Identyfikator Git "{}" sprawdzony, brak możliwości aktualizacji - + This is the latest version available for branch {} To jest najnowsza wersja dostępna dla gałęzi {} - + Updated, please restart FreeCAD to use Zaktualizowano, uruchom ponownie program FreeCAD - + Update check in progress Sprawdzanie aktualizacji w toku - + Automatic update checks disabled Automatyczne sprawdzanie aktualizacji wyłączone - + Installation location Miejsce instalacji - + WARNING: This addon is obsolete UWAGA: Ten dodatek jest przestarzały - + WARNING: This addon is Python 2 Only UWAGA: Ten dodatek jest przeznaczony tylko dla środowiska Python 2 - + WARNING: This addon requires FreeCAD OSTRZEŻENIE: Ten dodatek wymaga programu FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. OSTRZEŻENIE: Ten dodatek jest obecnie zainstalowany, ale wyłączony. Użyj przycisku "włącz", aby go ponownie włączyć. - - + + No URL or wiki page provided by this macro Brak adresu URL lub strony Wiki udostępnionej przez tę makrodefinicję - + Could not load README data from URL {} Nie można wczytać pliku danych README z adresu URL {} - + This Addon will be enabled next time you restart FreeCAD. Ten dodatek zostanie włączony przy następnym ponownym uruchomieniu programu FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Ten dodatek zostanie wyłączony przy ponownym uruchomieniu programu FreeCAD. - + Success Zakończono pomyślnie - + Branch change succeeded, please restart to use the new version. Zmiana gałęzi powiodła się, uruchom ponownie, aby użyć nowej wersji. - + Changed to git ref '{}' -- please restart to use Addon. Zmieniono w Git Reference's "{}" - Ponowne uruchomienie jest wymagane do użycia dodatku. - + Page JavaScript reported Zgłoszona strona JavaScript - + Install Zainstaluj - + Uninstall Odinstaluj - + Check for Update Sprawdź dostępność aktualizacji - + Run Macro Uruchom makrodefinicję - + Change Branch Zmień gałąź - + Enable Włącz - + Disable Wyłącz - + Return to package list Wróć do listy pakietów - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. Nie zainstalowano powiązań QtWebEngine z Pythonem — użycie awaryjnego wyświetlania pliku README. Szczegółowe informacje i instrukcje instalacji można znaleźć w oknie Raportu widoku. - + The page is taking a long time to load... showing the data we have so far... Strona długo się ładuje ... prezentując dostępne do tej pory dane ... @@ -2225,17 +2225,17 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Nie można zlokalizować pliku określonego przez makro {} (powinien być w {}) - + {}: Unrecognized internal workbench '{}' {}: Nierozpoznane wewnętrzne środowisko pracy "{}" - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Ostrzeżenie dla twórców dodatku: Adres URL repozytorium ustawiony w pliku package.xml dla dodatku {} ({}) nie pasuje do adresu URL pobranego z ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Ostrzeżenie dla twórców dodatku: Gałąź repozytorium ustawiona w pliku package.xml dla dodatku {} ({}) nie pasuje do gałęzi, z której został on pobrany ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts index bd3af9330f..4f0793e141 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Atualizar @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Instalar - + Uninstall Desinstalar - + Check for Update Check for Update - + Run Macro Executar macro - + Change Branch Alterar Ramo - + Enable Ativar - + Disable Desativar - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts index a7083fbb2e..eeeb073f53 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Atualizar @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable Ativar - + Disable Desativar - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index e15a87f970..6e7d6420b9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Actualizare @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable Activeaza - + Disable Dezactivare - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm index 5adca706df..3682d9994a 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index 0a73cf3d65..d8fe2f3960 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -34,7 +34,7 @@ <b>Package Name</b> - <b>Имя пакета</b> + <b>Название пакета</b> @@ -62,7 +62,7 @@ Dependency type - Тип Зависимости + Тип зависимости @@ -140,7 +140,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Explanation of what this Addon provides. Displayed in the Addon Manager. It is not necessary for this to state that this is a FreeCAD Addon. - Объяснение того, что предоставляет это дополнение. Отображается в диспетчере дополнений. Для этого нет необходимости указывать, что это дополнение FreeCAD. + Описание возможностей дополнения, отображаемое в Менеджере дополнений. Нет необходимости писать, что это дополнение FreeCAD. @@ -214,7 +214,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Name - Название Дополнения + Название дополнения @@ -224,7 +224,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore (Recommended) - (Рекомендовано) + (Рекомендуется) @@ -239,12 +239,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Detect... - Обнаружение... + Найти... Addon Contents - Содержание Дополнения + Содержимое дополнения @@ -312,17 +312,17 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Edit Tags - Изменить Метки + Редактировать теги Comma-separated list of tags describing this item: - Список меток, разделённых запятыми, описывающих этот пункт: + Список тегов, разделённых запятыми, описывающий этот элемент: HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. - ПОДСКАЗКА: Общие метки включают "Assembly", "FEM", "Mesh", "NURBS", и т.д. + ПОДСКАЗКА: Обычно теги содержат "Assembly", "FEM", "Mesh", "NURBS" и т.д. @@ -375,12 +375,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Edit Dependency - Изменить Зависимость + Редактировать зависимость Dependency Type - Тип Зависимости + Тип зависимости @@ -390,12 +390,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Package name, if "Other..." - Название пакета, если "Другой..." + Название пакета, если "Другое..." NOTE: If "Other..." is selected, the package is not in the ALLOWED_PYTHON_PACKAGES.txt file, and will not be automatically installed by the Addon Manager. Submit a PR at <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> to request addition of a package. - ПРИМЕЧАНИЕ: Если выбрано "Другое...", пакет отсутствует в файле ALLOWED_PYTHON_PACKAGES.txt и не будет автоматически установлен диспетчером дополнений. Отправьте PR на <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a>, чтобы запросить добавление пакета. + ПРИМЕЧАНИЕ: Если выбрано "Другое..." и название пакета отсутствует в ALLOWED_PYTHON_PACKAGES.txt, то пакет не будет автоматически установлен Менеджером дополнений. Отправьте PR на <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a>, чтобы запросить добавление пакета. @@ -443,7 +443,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Maintainer - Разработчик + Сопровождающий @@ -482,7 +482,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Kind - Kind + Роль @@ -659,17 +659,17 @@ installed addons will be checked for available updates Show option to change branches (requires git) - Show option to change branches (requires git) + Показать опцию для смены ветвей (требуется git) Disable git (fall back to ZIP downloads only) - Disable git (fall back to ZIP downloads only) + Отключить git (загружать только ZIP) Activate Addon Manager options intended for developers of new Addons. - Activate Addon Manager options intended for developers of new Addons. + Активировать опции менеджера расширений, предназначенные для разработчиков новых Addons. @@ -750,7 +750,7 @@ installed addons will be checked for available updates An asterisk (*) in the "Used by" column indicates an optional dependency. Note that Used by only records direct imports in the Addon. Other Python packages that those packages depend upon may have been installed as well. - An asterisk (*) in the "Used by" column indicates an optional dependency. Note that Used by only records direct imports in the Addon. Other Python packages that those packages depend upon may have been installed as well. + Знак (*) в столбце "Используется в" указывает на необязательную зависимость. Заметьте, что в столбце "Используется в" показаны прямо импортированные пакеты. Другие пакеты Python, необходимые для этих пакетов, также могут быть установлены. @@ -776,12 +776,12 @@ installed addons will be checked for available updates Updating Addons - Updating Addons + Обновление дополнений Updating out-of-date addons... - Updating out-of-date addons... + Обновление устаревших дополнений... @@ -819,17 +819,17 @@ installed addons will be checked for available updates This is the only item in the Addon - This is the only item in the Addon + Это ― единственный элемент в дополнении Main macro file - Main macro file + Основной макрос файл The file with the macro's metadata in it - The file with the macro's metadata in it + Файл, содержащий метаданные, макроса @@ -846,22 +846,22 @@ installed addons will be checked for available updates Workbench class name - Workbench class name + Название класса верстака Class that defines "Icon" data member - Class that defines "Icon" data member + Класс, определяющий элемент "Icon" Subdirectory - Subdirectory + Подкаталог Optional, defaults to name of content item - Optional, defaults to name of content item + Необязательно, по умолчанию это имя элемента @@ -876,12 +876,12 @@ installed addons will be checked for available updates Optional, defaults to inheriting from top-level Addon - Optional, defaults to inheriting from top-level Addon + Необязательно, по умолчанию наследуется от дополнения верхнего уровня Tags... - Метки... + Теги... @@ -901,7 +901,7 @@ installed addons will be checked for available updates Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD". - Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD". + Отображается в списке Менеджера дополнений. Не может содержать слово "FreeCAD". @@ -998,12 +998,12 @@ installed addons will be checked for available updates Add Person - Add Person + Добавить пользователя A maintainer is someone with current commit access on this project. An author is anyone else you'd like to give credit to. - A maintainer is someone with current commit access on this project. An author is anyone else you'd like to give credit to. + Сопровождающий ― кто-то с возможностью коммита в этом проекте. Автор ― кому вы отдаёте должное. @@ -1240,19 +1240,19 @@ installed addons will be checked for available updates No updates available - Обновления недоступны + Нет доступных обновлений Cannot launch a new installer until the previous one has finished. - Cannot launch a new installer until the previous one has finished. + Невозможно запустить новую установку, пока не завершена предыдущая. Execution of macro failed. See console for failure details. - Execution of macro failed. See console for failure details. + Не удалось выполнить макрос. Подробности об ошибке смотрите в консоли. @@ -1260,7 +1260,7 @@ installed addons will be checked for available updates Maintainer - Разработчик + Сопровождающий @@ -1273,21 +1273,21 @@ installed addons will be checked for available updates New Python Version Detected - New Python Version Detected + Обнаружена новая версия Python This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it? - This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it? + Похоже, что эта версия Python впервые используется в Менеджере дополнений. Установить такие же автоматические зависимости? Processing, please wait... - Processing, please wait... + Обработка, пожалуйста подождите... - + Update Обновить @@ -1299,7 +1299,7 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") + Не удалось импортировать QtNetwork ― видимо, он не установлен в системе. У вашего поставщика может быть пакет для этой зависимости (обычно это "python3-pyside2.qtnetwork") @@ -1309,29 +1309,29 @@ installed addons will be checked for available updates Parameter error: mutually exclusive proxy options set. Resetting to default. - Parameter error: mutually exclusive proxy options set. Resetting to default. + Ошибка параметров: взаимно исключающие параметры прокси. Используются параметры по умолчанию. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - Parameter error: user proxy indicated, but no proxy provided. Resetting to default. + Ошибка параметров: указан пользовательский прокси, но прокси не предоставлен. Используются параметры по умолчанию. Addon Manager: Unexpected {} response from server - Addon Manager: Unexpected {} response from server + Менеджер дополнений: Неожиданный ответ сервера {} Error with encrypted connection - Error with encrypted connection + Ошибка защищенного соединения Confirm remove - Confirm remove + Подтвердите удаление @@ -1343,241 +1343,241 @@ installed addons will be checked for available updates Removing Addon - Removing Addon + Удаление дополнения Removing {} - Removing {} + Удаление {} Uninstall complete - Uninstall complete + Удаление завершено Uninstall failed - Uninstall failed + Удаление не удалось Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. + Предупреждение Менеджера дополнений: Не удалось импортировать QtWebEngineWidgets. Системный пакетный менеджер может предоставлять пакет для этой зависимости, запустите поиск в пакетном менеджере для возможных разрешений. Отображение README пакета будет ограничено, пока эта зависимость не разрешена. - + Version {version} installed on {date} - Version {version} installed on {date} + Версия {version} установлена {date} - + Version {version} installed - Version {version} installed + Версия {version} установлена - + Installed on {date} - Installed on {date} + Установлено {date} - + Installed - Installed + Установлено - + On branch {}, update available to version - On branch {}, update available to version + В ветке {} доступно обновление до - + Update available to version - Update available to version + Доступно обновление до версии - + An update is available - An update is available + Доступно обновление - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} - This is the latest version available for branch {} + Это последняя версия, доступная для ветки {} - + Updated, please restart FreeCAD to use Обновлено, пожалуйста, перезапустите FreeCAD для использования - + Update check in progress Выполняется проверка обновлений - + Automatic update checks disabled Автоматическая проверка обновлений отключена - + Installation location Место установки - + WARNING: This addon is obsolete ВНИМАНИЕ: Это дополнение устарело - + WARNING: This addon is Python 2 Only ВНИМАНИЕ: Это дополнение только для Python 2 - + WARNING: This addon requires FreeCAD ВНИМАНИЕ: Для этого дополнения требуется FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro - No URL or wiki page provided by this macro + Этот макрос не предоставил ссылку или страницу в вики - + Could not load README data from URL {} - Could not load README data from URL {} + Не удалось загрузить данные README по ссылке {} - + This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Это дополнение будет включено при перезапуске FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Это дополнение будет отключено при перезапуске FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Установить - + Uninstall Удалить - + Check for Update Check for Update - + Run Macro Выполнить макрос - + Change Branch Изменить ветку - + Enable Включить - + Disable Отключить - + Return to package list - Return to package list + Вернуться к списку пакетов - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... - The page is taking a long time to load... showing the data we have so far... + Загрузка страницы занимает много времени. Показываю что есть. Checking connection - Checking connection + Проверка соединения Checking for connection to GitHub... - Checking for connection to GitHub... + Проверяем соединение к GitHub... Connection failed - Connection failed + Подключиться не удалось Missing dependency - Missing dependency + Отсутствуют зависимости Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. - Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. + Не удалось импортировать QtNetwork ― смотрите Просмотр отчёта для подробностей. Менеджер дополнений недоступен. Other... For providing a license other than one listed - Other... + Другое... @@ -1587,44 +1587,44 @@ installed addons will be checked for available updates Location for new license file - Location for new license file + Расположение нового файла лицензии Received {} response code from server - Received {} response code from server + Получен ответ {} от сервера Failed to install macro {} - Failed to install macro {} + Не удалось установить макрос {} Unrecognized content kind '{}' - Unrecognized content kind '{}' + Нераспознанный тип контента '{}' Unable to locate icon at {} - Unable to locate icon at {} + Не удалось найти значок в {} Select an icon file for this content item - Select an icon file for this content item + Выберите файл значка для этого элемента содержимого {} is not a subdirectory of {} - {} is not a subdirectory of {} + {} не является подкаталогом {} Select the subdirectory for this content item - Select the subdirectory for this content item + Выберите поддиректорию для этого элемента содержимого @@ -1644,7 +1644,7 @@ installed addons will be checked for available updates Python - Python + Python @@ -1654,33 +1654,33 @@ installed addons will be checked for available updates Internal Workbench - Internal Workbench + Внутренний верстак External Addon - External Addon + Внешнее дополнение Python Package - Python Package + Пакет Python Other... - Other... + Другое... This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: - This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: + Это дополнение требует неустановленные пакеты Python, которые не могут быть установлены автоматически. Для использования этого верстака Вы должны вручную установить следующие пакеты Python: Too many to list - Too many to list + Слишком много для списка @@ -1690,38 +1690,38 @@ installed addons will be checked for available updates Missing Requirement - Missing Requirement + Отсутствуют требование Addon '{}' requires '{}', which is not available in your copy of FreeCAD. - Addon '{}' requires '{}', which is not available in your copy of FreeCAD. + Дополнению '{}' необходим '{}', что недоступно в этой копии FreeCAD. Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: - Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: + Дополнению '{}' необходимы следующие верстаки, недоступные в этой копии FreeCAD: Press OK to install anyway. - Press OK to install anyway. + Нажмите OK, чтобы все равно установить. Incompatible Python version - Incompatible Python version + Несовместимая версия Python This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. - This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. + Этому дополнению или его зависимостям необходим Python {}.{}, имеется: {}.{}. Установка отменена. Optional dependency on {} ignored because it is not in the allow-list - Optional dependency on {} ignored because it is not in the allow-list + Необязательная зависимость {} пропущена, потому что её нет в белом списке @@ -1733,45 +1733,45 @@ installed addons will be checked for available updates Cannot execute Python - Cannot execute Python + Невозможно выполнить Python Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. - Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. + Не удалось автоматически определить Ваш исполняемый файл Python или путь к нему установлен неправильно. Пожалуйста, проверьте в настройках Менеджера дополнений путь к Python. Dependencies could not be installed. Continue with installation of {} anyway? - Dependencies could not be installed. Continue with installation of {} anyway? + Зависимости не могут быть установлены. Всё равно продолжить установку {}? Cannot execute pip - Cannot execute pip + Невозможно выполнить pip Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: - Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: + Не удалось запустить pip, возможно, он отсутствует в системе. Пожалуйста, убедитесь, что pip установлен и повторите попытку. Команда, вызвавшая сбой, была: Continue with installation of {} anyway? - Continue with installation of {} anyway? + Всё равно продолжить установку {}? Package installation failed - Package installation failed + Установка пакета не удалась See Report View for detailed failure log. - See Report View for detailed failure log. + Подробный журнал ошибок смотрите в Отчете. @@ -1781,22 +1781,22 @@ installed addons will be checked for available updates Installing FreeCAD Addon '{}' - Installing FreeCAD Addon '{}' + Установка дополнения FreeCAD '{}' Cancelling - Cancelling + Отмена Cancelling installation of '{}' - Cancelling installation of '{}' + Отмена установки '{}' {} was installed successfully - {} was installed successfully + {0} успешно установлен @@ -1807,19 +1807,19 @@ installed addons will be checked for available updates Failed to install {} - Failed to install {} + Не удалось установить %s Create new toolbar - Create new toolbar + Создать новую панель инструментов A macro installed with the FreeCAD Addon Manager - A macro installed with the FreeCAD Addon Manager + Макрос, устанавливаемый вместе с Менеджером дополнений FreeCAD @@ -1831,22 +1831,22 @@ installed addons will be checked for available updates Unable to read data from GitHub: check your internet connection and proxy settings and try again. - Unable to read data from GitHub: check your internet connection and proxy settings and try again. + Не удаётся прочитать данные с GitHub: проверьте подключение к Интернету и настройки прокси и повторите попытку. XML failure while reading metadata from file {} - XML failure while reading metadata from file {} + Ошибка XML при чтении метаданных из файла {} Invalid metadata in file {} - Invalid metadata in file {} + Недопустимые метаданные в файле {} WARNING: Path specified in package.xml metadata does not match currently checked-out branch. - WARNING: Path specified in package.xml metadata does not match currently checked-out branch. + ПРЕДУПРЕЖДЕНИЕ: Указанный в метаданных package.xml путь не соответствует проверяемой ветке. @@ -1866,7 +1866,7 @@ installed addons will be checked for available updates Subdirectory - Subdirectory + Подкаталог @@ -1876,43 +1876,43 @@ installed addons will be checked for available updates Select the folder containing your Addon - Select the folder containing your Addon + Выберите папку, содержащую аддон No Vermin, cancelling operation. NOTE: Vermin is a Python package and proper noun - do not translate - No Vermin, cancelling operation. + Отсутствует Vermin, операция отменяется. Scanning Addon for Python version compatibility - Scanning Addon for Python version compatibility + Сканирование дополнения для совместимости с Python Minimum Python Version Detected - Minimum Python Version Detected + Обнаружена минимальная версия Python Vermin auto-detected a required version of Python 3.{} - Vermin auto-detected a required version of Python 3.{} + Vermin автоматически обнаружил необходимую версию Python 3.{} Install Vermin? - Install Vermin? + Установить Vermin? Autodetecting the required version of Python for this Addon requires Vermin (https://pypi.org/project/vermin/). OK to install? - Autodetecting the required version of Python for this Addon requires Vermin (https://pypi.org/project/vermin/). OK to install? + Для автоматического определения требуемой версии Python требуется Vermin (https://pypi.org/project/vermin/). Установить? Attempting to install Vermin from PyPi - Attempting to install Vermin from PyPi + Попытка установить Vermin с PyPi @@ -1924,13 +1924,13 @@ installed addons will be checked for available updates Failed to install Vermin -- check Report View for details. 'Vermin' is the name of a Python package, do not translate - Failed to install Vermin -- check Report View for details. + Не удалось установить Vermin ― подробности смотрите в Просмотре отчёта. Failed to import vermin after installation -- cannot scan Addon. 'vermin' is the name of a Python package, do not translate - Failed to import vermin after installation -- cannot scan Addon. + Не удалось импортировать Vermin после установки ― невозможно сканировать дополнение. @@ -1940,12 +1940,12 @@ installed addons will be checked for available updates Filter is valid - Filter is valid + Фильтр действителен Filter regular expression is invalid - Filter regular expression is invalid + Регулярное выражение фильтра недопустимо @@ -1981,7 +1981,7 @@ installed addons will be checked for available updates Up-to-date - Up-to-date + Актуальная версия @@ -1994,7 +1994,7 @@ installed addons will be checked for available updates Pending restart - Pending restart + В ожидании перезапуска @@ -2015,7 +2015,7 @@ installed addons will be checked for available updates Installed on - Installed on + Установлено @@ -2025,7 +2025,7 @@ installed addons will be checked for available updates Show Addons containing: - Show Addons containing: + Показать дополнения, содержащие: @@ -2045,7 +2045,7 @@ installed addons will be checked for available updates Preference Packs - Preference Packs + Пользовательские пакеты @@ -2110,7 +2110,7 @@ installed addons will be checked for available updates Kind Table header for git ref type (e.g. either Tag or Branch) - Kind + Роль @@ -2139,103 +2139,103 @@ installed addons will be checked for available updates Installation of Python package {} failed - Installation of Python package {} failed + Не удалось установить пакет {} Installation of optional package failed - Installation of optional package failed + Не удалось установить необязательный пакет Installing required dependency {} - Installing required dependency {} + Установка требуемой зависимости {} Installation of Addon {} failed - Installation of Addon {} failed + Не удалось установить пакет {} Downloaded package.xml for {} - Downloaded package.xml for {} + Загружен package.xml для {} Failed to decode {} file for Addon '{}' - Failed to decode {} file for Addon '{}' + Не удалось декодировать файл {} дополнения '{}' Any dependency information in this file will be ignored - Any dependency information in this file will be ignored + Любая информация о зависимостях в этом файле будет игнорироваться Downloaded metadata.txt for {} - Downloaded metadata.txt for {} + Загружен metadata.txt для {} Downloaded requirements.txt for {} - Downloaded requirements.txt for {} + Загружен requirements.txt для {} Downloaded icon for {} - Downloaded icon for {} + Загружен значок для {} Syntax error while reading {} from macro {} - Syntax error while reading {} from macro {} + Синтаксическая ошибка чтения {} макроса {} Unable to open macro wiki page at {} - Unable to open macro wiki page at {} + Невозможно открыть страницу в вики макроса {} Unable to fetch the code of this macro. - Unable to fetch the code of this macro. + Не удаётся получить код макроса. Unable to retrieve a description from the wiki for macro {} - Unable to retrieve a description from the wiki for macro {} + Не удаётся загрузить описание с вики для макроса {} Unable to open macro code URL {} - Unable to open macro code URL {} + Не удаётся открыть URL кода макроса {} Unable to fetch macro-specified file {} from {} - Unable to fetch macro-specified file {} from {} + Не удалось загрузить файл {}, необходимый для макроса {} Could not locate macro-specified file {} (should have been at {}) - Could not locate macro-specified file {} (should have been at {}) + Не удалось найти указанный файл макроса {} (должен быть в {}) - + {}: Unrecognized internal workbench '{}' - {}: Unrecognized internal workbench '{}' + {}: Нераспознанный внутренний верстак '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) + Предупреждение разработчика Дополнения: URL-адрес репозитория, заданный в файле package.xml для дополнения {} ({}), не соответствует URL-адресу, с которого он был получен ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) + Предупреждение разработчика Дополнения: ветка репозитория, указанная в файле package.xml для надстройки {} ({}), не соответствует ветке, из которой она была получена ({}) @@ -2245,32 +2245,32 @@ installed addons will be checked for available updates Could not find addon {} to remove it. - Could not find addon {} to remove it. + Не удалось найти аддон {}, чтобы удалить его. Execution of Addon's uninstall.py script failed. Proceeding with uninstall... - Execution of Addon's uninstall.py script failed. Proceeding with uninstall... + Выполнение скрипта uninstall.py не удалось. Продолжение удаления... Removed extra installed file {} - Removed extra installed file {} + Удален дополнительно установленный файл {} Error while trying to remove extra installed file {} - Error while trying to remove extra installed file {} + Ошибка при попытке удалить дополнительно установленный файл {} Error while trying to remove macro file {}: - Error while trying to remove macro file {}: + Ошибка при попытке удалить файл макроса {}: Failed to connect to GitHub. Check your connection and proxy settings. - Failed to connect to GitHub. Check your connection and proxy settings. + Не удалось подключиться к GitHub. Проверьте подключение и настройки прокси. @@ -2280,12 +2280,12 @@ installed addons will be checked for available updates Workbenches list was updated. - Workbenches list was updated. + Список верстаков обновлён. Git is disabled, skipping git macros - Git is disabled, skipping git macros + Git отключен, пропуск git макросов @@ -2312,84 +2312,84 @@ installed addons will be checked for available updates Failed to update macros from GitHub -- try clearing the Addon Manager's cache. - Failed to update macros from GitHub -- try clearing the Addon Manager's cache. + Не удалось обновить макрос с GitHub ― попробуйте очистить кэш Менеджера дополнений. Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time - Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time + Ошибка подключения к Wiki, FreeCAD не может получить список Вики по макросам в данное время Unable to fetch git updates for workbench {} - Unable to fetch git updates for workbench {} + Не удалось получить обновления git для верстака {} git status failed for {} - git status failed for {} + сбой статуса git для {} Failed to read metadata from {name} - Failed to read metadata from {name} + Не удалось прочитать метаданные из {name} Failed to fetch code for macro '{name}' - Failed to fetch code for macro '{name}' + Не удалось получить код для макроса '{name}' Caching macro code... - Caching macro code... + Кэширование кода макроса... Addon Manager: a worker process failed to complete while fetching {name} - Addon Manager: a worker process failed to complete while fetching {name} + Менеджер дополнений: рабочему процессу не удалось загрузить {name} Out of {num_macros} macros, {num_failed} timed out while processing - Out of {num_macros} macros, {num_failed} timed out while processing + При обработке {num_macros} макрос(ов/а), у {num_failed} истекло время ожидания Addon Manager: a worker process failed to halt ({name}) - Addon Manager: a worker process failed to halt ({name}) + Менеджер дополнений: рабочий процесс ({name}) не удалось остановить Getting metadata from macro {} - Getting metadata from macro {} + Получение метаданных из макроса {} Timeout while fetching metadata for macro {} - Timeout while fetching metadata for macro {} + Таймаут при получении метаданных для макроса {} Failed to kill process for macro {}! - Failed to kill process for macro {}! + Не удалось убить процесс для макроса {}! Retrieving macro description... - Retrieving macro description... + Получение описания макроса... Retrieving info from git - Retrieving info from git + Получение информации из git Retrieving info from wiki - Retrieving info from wiki + Получение информации из вики @@ -2401,47 +2401,47 @@ installed addons will be checked for available updates Branch name Preferences header for custom repositories - Branch name + Имя ветви Basic git update failed with the following message: - Basic git update failed with the following message: + Ошибка базового git обновления со следующим сообщением: Backing up the original directory and re-cloning - Backing up the original directory and re-cloning + Делаю резервную копию исходного каталога и клонирую повторно Failed to clone {} into {} using git - Failed to clone {} into {} using git + Не удалось скопировать {} в {} используя git Installing - Installing + Установка Succeeded - Succeeded + Успешно Failed - Failed + Ошибка Update was cancelled - Update was cancelled + Обновление было отменено some addons may have been updated - some addons may have been updated + некоторые дополнения были обновлены @@ -2454,7 +2454,7 @@ installed addons will be checked for available updates Manage external workbenches, macros, and preference packs - Manage external workbenches, macros, and preference packs + Управление внешними верстаками, макросами и наборами настроек @@ -2462,12 +2462,12 @@ installed addons will be checked for available updates Finished removing {} - Finished removing {} + Завершено удаление {} Failed to remove some files - Failed to remove some files + Не удалось удалить некоторые файлы @@ -2475,7 +2475,7 @@ installed addons will be checked for available updates Finished updating the following addons - Finished updating the following addons + Завершено обновление следующих дополнений diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index ff26018963..469ebbea7a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -1289,7 +1289,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke - + Update Posodobi @@ -1370,22 +1370,22 @@ preveril razpoložljivost posodobitev za nameščene dodatke Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ preveril razpoložljivost posodobitev za nameščene dodatke Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Namesti - + Uninstall Odmesti - + Check for Update Check for Update - + Run Macro Zaženi makro - + Change Branch Spremeni vejo - + Enable Omogoči - + Disable Onemogoči - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ preveril razpoložljivost posodobitev za nameščene dodatke Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts index 9417d80e8f..6e00a97bcd 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts @@ -1289,7 +1289,7 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja - + Update Ažuriranje @@ -1370,22 +1370,22 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Upozorenje Menadžera dodataka: Nije moguće uvesti QtWebEngineWidgets. Menadžer paketa tvog sistema može da obezbedi paket za ovu zavisnost, pretraži menadžer paketa za moguća rešenja. Prikaz paketa README će biti ograničen dok se ova zavisnost ne reši. - + Version {version} installed on {date} Dana {date} instalirana je verzija {version} - + Version {version} installed Instalirana je verzija {version} - + Installed on {date} Instalirano {date} - + @@ -1393,160 +1393,160 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Instalirano - + On branch {}, update available to version Na grani {} dostupno je ažuriranje za verziju - + Update available to version Доступно је ажурирање за верзију - + An update is available Dostupno je ažuriranje - + Git tag '{}' checked out, no updates possible Git oznaka '{}' checked out, ažuriranja nisu moguća - + This is the latest version available for branch {} Ovo je najnovija verzija dostupna za granu {} - + Updated, please restart FreeCAD to use Ažurirano, ponovo pokrenite FreeCAD da biste ga koristili - + Update check in progress U toku je provera ažuriranja - + Automatic update checks disabled Automatske provere ažuriranja su onemogućene - + Installation location Lokacija instalacije - + WARNING: This addon is obsolete UPOZORENJE: Ovaj dodatak je zastareo - + WARNING: This addon is Python 2 Only UPOZORENJE: Ovaj dodatak je samo za Python 2 - + WARNING: This addon requires FreeCAD UPOZORENJE: Ovaj dodatak zahteva FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. UPOZORENJE: Ovaj dodatak je trenutno instaliran, ali je onemogućen. Koristi 'omogući' dugme da bi ponovo omogućio. - - + + No URL or wiki page provided by this macro Ovaj makro ne daje URL ili wiki stranicu - + Could not load README data from URL {} Nije moguće učitati README podatke sa URL-a {} - + This Addon will be enabled next time you restart FreeCAD. Ovaj Dodatak će biti omogućen sledeći put kada ponovo pokreneš FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Ovaj Dodatak će biti onemogućen sledeći put kada ponovo pokreneš FreeCAD. - + Success Uspešno - + Branch change succeeded, please restart to use the new version. Promena grane je uspela, ponovo pokreni da bi koristio novu verziju. - + Changed to git ref '{}' -- please restart to use Addon. Promenjeno u git ref '{}' -- ponovo pokreni da bi koristio Dodatak. - + Page JavaScript reported Prijavljen JavaScript na stranici - + Install Instaliraj - + Uninstall Deinstaliraj - + Check for Update Proveri ažuriranja - + Run Macro Pokreni makro - + Change Branch Promeni granu - + Enable Omogući - + Disable Onemogući - + Return to package list Vrati se na listu paketa - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python veze nisu instalirane -- koristi se rezervni README prikaz. Pogledaj Pregledač izveštaja za detalje i uputstva za instalaciju. - + The page is taking a long time to load... showing the data we have so far... Stranica se dugo učitava... prikazuje podatke koje imamo do sada... @@ -2225,17 +2225,17 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Nije moguće locirati datoteku navedenu makro-om {} (trebala je biti u {}) - + {}: Unrecognized internal workbench '{}' {}: Neprepoznato unutrašnje radno okruženje '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Upozorenje za programere dodataka: URL adresa spremišta zadata u package.xml datoteci za dodatak {} ({}) ne odgovara URL adresi sa koje je preuzet ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Upozorenje za programere dodataka: Grana spremišta postavljena u package.xml datoteci za dodatak {} ({}) se ne podudara sa granom iz koje je preuzeta ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts index d0b2315c5f..8857de47dd 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Ажурирање @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Упозорење Менаџера додатака: Није могуће увести QtWebEngineWidgets. Менаџер пакета твог система може да обезбеди пакет за ову зависност, претражи менаџер пакета за могућа решења. Приказ пакета README ће бити ограничен док се ова зависност не реши. - + Version {version} installed on {date} Дана {date} инсталирана је верзија {version} - + Version {version} installed Инсталирана је верзија {version} - + Installed on {date} Инсталирано {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Инсталирано - + On branch {}, update available to version На грани {} доступно је ажурирање за верзију - + Update available to version Доступно је ажурирање за верзију - + An update is available Доступно је ажурирање - + Git tag '{}' checked out, no updates possible Git ознака '{}' checked out, ажурирања нису могућа - + This is the latest version available for branch {} Ово је најновија верзија доступна за грану {} - + Updated, please restart FreeCAD to use Ажурирано, поново покрените FreeCAD да бисте га користили - + Update check in progress У току је провера ажурирања - + Automatic update checks disabled Аутоматске провере ажурирања су онемогућене - + Installation location Локација инсталације - + WARNING: This addon is obsolete УПОЗОРЕЊЕ: Овај додатак је застарео - + WARNING: This addon is Python 2 Only УПОЗОРЕЊЕ: Овај додатак је само за Python 2 - + WARNING: This addon requires FreeCAD УПОЗОРЕЊЕ: Овај додатак захтева FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. УПОЗОРЕЊЕ: Овај додатак је тренутно инсталиран, али онемогућен. Користи 'омогући' дугме да би поново омогућио. - - + + No URL or wiki page provided by this macro Овај макро не даје URL или wiki страницу - + Could not load README data from URL {} Није могуће учитати README податке са URL-а {} - + This Addon will be enabled next time you restart FreeCAD. Овај Додатак ће бити омогућен следећи пут када поново покренеш FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Овај Додатак ће бити онемогућен следећи пут када поново покренеш FreeCAD. - + Success Успешно - + Branch change succeeded, please restart to use the new version. Промена гране је успела, поново покрени да би користио нову верзију. - + Changed to git ref '{}' -- please restart to use Addon. Промењено у git ref '{}' -- поново покрени да би користио Додатак. - + Page JavaScript reported Пријављен JavaScript на страници - + Install Инсталирај - + Uninstall Деинсталирај - + Check for Update Провери ажурирања - + Run Macro Покрени макро - + Change Branch Промени грану - + Enable Омогући - + Disable Онемогући - + Return to package list Врати се на листу пакета - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python везе нису инсталиране -- користи се резервни README приказ. Погледае Прегледач извештаја за детаље и упутства за инсталацију. - + The page is taking a long time to load... showing the data we have so far... Страница се дуго учитава... приказује податке које имамо до сада... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Није могуће лоцирати датотеку наведену макро-ом {} (требала је бити у {}) - + {}: Unrecognized internal workbench '{}' {}: Непрепознато унутрашње радно окружење '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Упозорење за програмере додатака: URL адреса спремишта задата у package.xml датотеци за додатак {} ({}) не одговара URL адреси са које је преузет ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Упозорење за програмере додатака: Грана спремишта постављена у package.xml датотеци за додатак {} ({}) се не подудара са граном из које је преузета ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts index cbf0c88e80..8e9c7d1f9f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Uppdatera @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Installera - + Uninstall Avinstallera - + Check for Update Check for Update - + Run Macro Kör makro - + Change Branch Change Branch - + Enable Aktivera - + Disable Avaktivera - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index 486fb0f356..d93a896fa1 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Güncelle @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Yükle - + Uninstall Kaldır - + Check for Update Check for Update - + Run Macro Makro Çalıştır - + Change Branch Branch Değiştir - + Enable Etkinleştir - + Disable Devre dışı - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts index 855d9beca5..4d64fde4d8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Оновити @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Встановити - + Uninstall Видалити - + Check for Update Check for Update - + Run Macro Запустити Макрос - + Change Branch Змінити гілку - + Enable Ввімкнути - + Disable Вимкнути - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts index 99a4e5bec9..2638e9816f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Actualitza @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable Habilita - + Disable Desactiva - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts index 231a35804e..70dd6e34d1 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update Cập nhật @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install Install - + Uninstall Uninstall - + Check for Update Check for Update - + Run Macro Run Macro - + Change Branch Change Branch - + Enable Bật - + Disable Không cho phép - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts index 814c747702..19ad1b767c 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update 更新 @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install 安装 - + Uninstall 卸载 - + Check for Update Check for Update - + Run Macro 运行宏 - + Change Branch 更改分支 - + Enable 启用 - + Disable 禁用 - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index a7b9cbfc85..6ed2aedca5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -1289,7 +1289,7 @@ installed addons will be checked for available updates - + Update 更新 @@ -1370,22 +1370,22 @@ installed addons will be checked for available updates Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved. - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - + @@ -1393,160 +1393,160 @@ installed addons will be checked for available updates Installed - + On branch {}, update available to version On branch {}, update available to version - + Update available to version Update available to version - + An update is available An update is available - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - + This is the latest version available for branch {} This is the latest version available for branch {} - + Updated, please restart FreeCAD to use Updated, please restart FreeCAD to use - + Update check in progress Update check in progress - + Automatic update checks disabled Automatic update checks disabled - + Installation location Installation location - + WARNING: This addon is obsolete WARNING: This addon is obsolete - + WARNING: This addon is Python 2 Only WARNING: This addon is Python 2 Only - + WARNING: This addon requires FreeCAD WARNING: This addon requires FreeCAD - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - - + + No URL or wiki page provided by this macro No URL or wiki page provided by this macro - + Could not load README data from URL {} Could not load README data from URL {} - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - + Changed to git ref '{}' -- please restart to use Addon. Changed to git ref '{}' -- please restart to use Addon. - + Page JavaScript reported Page JavaScript reported - + Install 安裝 - + Uninstall 解除安裝 - + Check for Update Check for Update - + Run Macro 執行巨集 - + Change Branch 變更分支 - + Enable 啟用 - + Disable 停用 - + Return to package list Return to package list - + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. - + The page is taking a long time to load... showing the data we have so far... The page is taking a long time to load... showing the data we have so far... @@ -2225,17 +2225,17 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (should have been at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) diff --git a/src/Mod/Arch/Resources/translations/Arch_be.qm b/src/Mod/Arch/Resources/translations/Arch_be.qm index 7c4a952d00..268ca34201 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_be.qm and b/src/Mod/Arch/Resources/translations/Arch_be.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_be.ts b/src/Mod/Arch/Resources/translations/Arch_be.ts index 7c89e44a26..9ae6fe0601 100644 --- a/src/Mod/Arch/Resources/translations/Arch_be.ts +++ b/src/Mod/Arch/Resources/translations/Arch_be.ts @@ -91,17 +91,17 @@ URL - Спасылак + URL-адрас A URL describing this material - Спасылак, які апісвае гэты матэрыял + URL-адрас, які апісвае гэты матэрыял Opens the URL in a browser - Адчыніць спасылак у аглядальніку + Адчыніць URL-адрас у аглядальніку @@ -335,7 +335,7 @@ Leave blank to use all objects from the document Import - Import + Імпарт @@ -355,7 +355,7 @@ Leave blank to use all objects from the document BimServer URL: - Адрас сервера BIM: + URL-адрас сервера BIM: @@ -647,17 +647,17 @@ Leave blank to use all objects from the document Join walls base sketches when possible - Злучыць базавыя эскізы сцен, калі гэтае магчыма + Злучыць асноўныя эскізы сцен, калі гэтае магчыма Two possible strategies to avoid circular dependencies: Create one more object (unchecked) or remove external geometry of base sketch (checked) - Дзве магчымыя стратэгіі, якія дазваляюць пазбегнуць цыклічных залежнасцяў: стварыць яшчэ адзін аб'ект (калі не птушка), альбо выдаліць вонкавую геаметрыю базавага эскіза (калі птушка) + Дзве магчымыя стратэгіі, якія дазваляюць пазбегнуць цыклічных залежнасцяў: стварыць яшчэ адзін аб'ект (калі не птушка), альбо выдаліць вонкавую геаметрыю асноўнага эскізу (калі птушка) Remove external geometry of base sketches when needed - Пры неабходнасці выдаліць вонкавую геаметрыю базавых эскізаў + Пры неабходнасці выдаліць вонкавую геаметрыю асноўных эскізаў @@ -846,7 +846,7 @@ a Footprint display mode The URL of a bim server instance (www.bimserver.org) to connect to. - Спасылак для злучэння з серверам BIM (www.bimserver.org). + URL-адрас для злучэння з серверам BIM (www.bimserver.org). @@ -858,9 +858,7 @@ a Footprint display mode If this is selected, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench - Калі птушка, кнопка "Адчыніць сервер BIM у аглядальніку" -сервера інтэрфейс сервера BIM у вонкавым аглядальніку -замест варштату Аглядальнік у FreeCAD + Калі птушка, кнопка "Адчыніць сервер BIM у аглядальніку" інтэрфейса сервера BIM у вонкавым аглядальніку замест варштату Аглядальнік у FreeCAD @@ -1049,7 +1047,7 @@ instead of the FreeCAD web workbench Pipes - Трубы + Трубаправоды @@ -1123,7 +1121,7 @@ of IFC files in the Report view panel Clones are used when objects have shared geometry One object is the base object, the others are clones. Дублікаты ўжываюцца, калі аб'екты маюць агульную геаметрыю -Адзін аб'ект з'яўляецца базавым аб'ектам, астатнія - дублікатамі. +Адзін аб'ект з'яўляецца асноўным аб'ектам, астатнія - дублікатамі. @@ -1299,7 +1297,7 @@ they will be treated as one. Allow invalid shapes - Дазволіць недапушчальныя фігуры + Дазволіць хібныя фігуры @@ -1508,7 +1506,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Тып аб'ектаў, якія вы жадаеце экспартаваць: - Стандартная мадэль: суцэльныя аб'екты. -- Структурны аналіз: каркасная мадэль для структурных разлікаў. +- Структурны дослед: каркасная мадэль для структурных разлікаў. - Стандартны + структурны: абодва тыпы мадэляў. @@ -1524,7 +1522,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Structural analysis - Структурны аналіз + Структурны дослед @@ -1758,7 +1756,7 @@ unit to work with when opening the file. Please select the base object first and then the edges to use as extrusion paths - Калі ласка, спачатку абярыце базавы аб'ект, а потым рэбры, якія будуць ужывацца ў якасці шляхоў выдушвання + Калі ласка, спачатку абярыце асноўны аб'ект, а потым рэбры, якія будуць ужывацца ў якасці шляхоў выдушвання @@ -1784,7 +1782,7 @@ unit to work with when opening the file. Base point of column - Базавая кропка слупка + Асноўная кропка слупка @@ -1857,13 +1855,13 @@ unit to work with when opening the file. Error: The base shape couldn't be extruded along this tool object - Памылка: не атрымалася выдушыць базавую фігура наўздоўж гэтага аб'екта інструмента + Памылка: не атрымалася выдушыць асноўную фігура наўздоўж гэтага аб'екта інструмента This mesh is an invalid solid - Гэтая паліганальная сетка з'яўляецца недапушчальным суцэльным целам + Гэтая паліганальная сетка з'яўляецца хібным суцэльным целам @@ -1914,7 +1912,7 @@ unit to work with when opening the file. Toggles all structural nodes of the document on/off - Уключае/выключае ўсе канструкцыйныя вузлы дакумента + Пераключае ўсе канструкцыйныя вузлы дакумента @@ -1942,37 +1940,37 @@ unit to work with when opening the file. The chosen object is not a Structure - The chosen object is not a Structure + Абраны аб'ект не з'яўляецца структурай The chosen object has no structural nodes - The chosen object has no structural nodes + Абраны аб'ект не мае структурных вузлоў One of these objects has more than 2 nodes - One of these objects has more than 2 nodes + Адзін з гэтых аб'ектаў мае больш за два вузла Unable to find a suitable intersection point - Unable to find a suitable intersection point + Не атрымалася знайсці прыдатную кропку скрыжавання Intersection found. - Intersection found. + Перасячэнне знойдзена. Intersection found. - Intersection found. + Перасячэнне знойдзена. @@ -1983,77 +1981,77 @@ unit to work with when opening the file. Couldn't compute a shape - Couldn't compute a shape + Не атрымалася вылічыць фігуру You must select a base shape object and optionally a mesh object - You must select a base shape object and optionally a mesh object + Вы павінны абраць аб'ект асноўнай фігуры і неабавязковы аб'ект паліганальнай сеткі Create Equipment - Create Equipment + Стварыць абсталяванне You must select exactly one base object - You must select exactly one base object + Вы павінны абраць толькі адзін асноўны аб'ект The selected object must be a mesh - The selected object must be a mesh + Абраны аб'ект павінен быць паліганальнай сеткай This mesh has more than 1000 facets. - This mesh has more than 1000 facets. + Гэтая паліганальная сетка мае больш за 1000 граняў. This operation can take a long time. Proceed? - This operation can take a long time. Proceed? + Гэтая аперацыя можа заняць шмат часу. Ці працягнуць? The mesh has more than 500 facets. This will take a couple of minutes... - The mesh has more than 500 facets. This will take a couple of minutes... + Паліганальная сетка мае больш за 500 граняў. Гэта зойме некалькі хвілін... Create 3 views - Create 3 views + Стварыць тры выгляду BuildingPart - BuildingPart + Будаўнічая дэталь Create BuildingPart - Create BuildingPart + Стварыць будаўнічую дэталь Deactivate - Дэактываваць + Адключыць Activate - Актываваць + Задзейнічаць Set working plane - Set working plane + Задаць працоўную плоскасць Write camera position - Write camera position + Запісаць становішча камеры @@ -2064,12 +2062,12 @@ unit to work with when opening the file. Reorder children alphabetically - Reorder children alphabetically + Змяніць парадак размяшчэння спадчыннікаў у алфавітным парадку Clone level up - Clone level up + Дубліраваць узровень уверх @@ -2081,17 +2079,17 @@ unit to work with when opening the file. Create profile - Create profile + Стварыць профіль Profile settings - Profile settings + Налады профілю Create Profile - Create Profile + Стварыць профіль @@ -2107,22 +2105,22 @@ Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. Note: You can change that in the preferences. - Please either select only Building objects or nothing at all! + Калі ласка, абярыце толькі будаўнічыя аб'екты, альбо наогул нічога! -Site is not allowed to accept any other object besides Building. +Мясцовасці не дазваляецца прымаць якія-небудзь іншыя аб'екты, акрамя будынка. -Other objects will be removed from the selection. +Іншыя аб'екты будуць выдаленыя з абранага. -Note: You can change that in the preferences. +Заўвага: Вы можаце змяніць гэта ў перавагах. There is no valid object in the selection. Site creation aborted. - There is no valid object in the selection. + У абраным аб'екце няма дапушчальнага аб'екта. -Site creation aborted. +Стварэнне мясцовасці перапынена. @@ -2133,25 +2131,25 @@ Site creation aborted. Create Roof - Create Roof + Стварыць дах Unable to create a roof - Unable to create a roof + Немагчыма стварыць дах - + Please select a base object - Please select a base object + Калі ласка, абярыце асноўны аб'ект Roof - Roof + Дах @@ -2166,17 +2164,17 @@ Site creation aborted. If Angle = 0 and Run = 0 then the profile is identical to the relative profile. If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. If Run = 0 then the run is calculated so that the height is the same as the relative profile. - Parameters of the roof profiles : -* Angle : slope in degrees relative to the horizontal. -* Run : horizontal distance between the wall and the ridge. -* Thickness : thickness of the roof. -* Overhang : horizontal distance between the eave and the wall. -* Height : height of the ridge above the base (calculated automatically). -* IdRel : Id of the relative profile used for automatic calculations. + Налады профіляў даху : +* Вугал: ухіл у градусах адносна гарызанталі. +* Прагон: гарызантальная адлегласць паміж сцяной і каньком. +* Таўшчыня: таўшчыня даху. +* Навісь: гарызантальная адлегласць паміж карнізам і сцяной. +* Вышыня: Вышыня канька над асновай (разлічваецца аўтаматычна). +* IdRel: ідэнтыфікатар адноснага профілю, які ўжываецца для аўтаматычных вылічэнняў. --- -If Angle = 0 and Run = 0 then the profile is identical to the relative profile. -If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. -If Run = 0 then the run is calculated so that the height is the same as the relative profile. +Калі вугал = 0 і прагон = 0, то профіль ідэнтычны адноснаму профілі. +Калі вугал = 0, то вугал вылічаецца такім чынам, каб вышыня супадала з адносным профілем. +Калі прагон = 0, то прагон разлічваецца такім чынам, каб вышыня супадала з адносным профілем. @@ -2186,37 +2184,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Angle (deg) - Angle (deg) + Вугал (градус) Run (mm) - Run (mm) + Прагон (мм) IdRel - IdRel + IdRel Thickness (mm) - Thickness (mm) + Таўшчыня (мм) Overhang (mm) - Overhang (mm) + Навісь (мм) Height (mm) - Height (mm) + Вышыня (мм) Door - Door + Дзверы @@ -2226,22 +2224,22 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Cut Plane - Cut Plane + Плоскасць разрэзу Cut Plane options - Cut Plane options + Налады плоскасці разрэзу Which side to cut - Which side to cut + З якога боку рэзаць Behind - Behind + Ззаду @@ -2251,17 +2249,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Reload reference - Reload reference + Перагрузіць апорны элемент Open reference - Open reference + Адчыніць апорны элемент Create external reference - Create external reference + Стварыць вонкавы апорны элемент @@ -2269,27 +2267,27 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Error: Couldn't determine character encoding - Error: Couldn't determine character encoding + Памылка: Не атрымалася вызначыць кадыроўку знакаў Frame - Frame + Каркас Create Frame - Create Frame + Стварыць каркас Crossing point not found in profile. - Crossing point not found in profile. + Кропка перакрыжавання ў профілі не знойдзена. Shapes elevation - Shapes elevation + Узвышэнне фігур @@ -2424,7 +2422,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2434,7 +2432,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Дадаць @@ -2450,7 +2448,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Змяніць @@ -2473,7 +2471,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Кампаненты @@ -2491,7 +2489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Тып @@ -2570,7 +2568,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -2585,7 +2583,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - Successfully written + Паспяхова запісана @@ -2724,7 +2722,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Grid - Grid + Сетка @@ -2969,17 +2967,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Pipe - Create Pipe + Стварыць трубаправод Please select exactly 2 or 3 Pipe objects - Please select exactly 2 or 3 Pipe objects + Калі ласка, абярыце роўна два ці тры аб'екта трубаправода Please select only Pipe objects - Please select only Pipe objects + Калі ласка, абярыце толькі аб'ект трубаправода @@ -2999,7 +2997,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to build the pipe - Unable to build the pipe + Немагчыма пабудаваць трубаправод @@ -3014,7 +3012,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The base wire is closed - The base wire is closed + Асноўная ломаная лінія замкнутая @@ -3024,7 +3022,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The profile is not closed - The profile is not closed + Профіль не замкнуты @@ -3040,12 +3038,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Pipes are already aligned - Pipes are already aligned + Трубаправоды ўжо выраўнаваныя At least 2 pipes must align - At least 2 pipes must align + Прынамсі, два трубаправоды павінны быць выраўнаваныя @@ -3083,7 +3081,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Значэнне @@ -3173,19 +3171,19 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape - has an invalid shape + мае хібную фігуру @@ -3194,103 +3192,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents - Toggle subcomponents + Пераключыць укладзеныя кампаненты - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Аб'екты - + Fixtures Fixtures - + Group Суполка - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Уласцівасць - + Add property... Add property... - + Add property set... Add property set... - + New... Новы... - + New property New property - + New property set New property set @@ -3313,7 +3311,7 @@ Floor creation aborted. Toggle Cutview - Toggle Cutview + Пераключыць плоскасць перасеку @@ -3538,12 +3536,12 @@ Building creation aborted. Invalid cutplane - Invalid cutplane + Хібная плоскасць разрэзу is not closed - is not closed + не замкнуты @@ -3558,7 +3556,7 @@ Building creation aborted. contains a non-closed solid - contains a non-closed solid + змяшчае незамкнутыя суцэльныя целы @@ -3943,7 +3941,7 @@ Building creation aborted. A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Супастаўленне MaterialName:SolidIndexesList, якое звязвае назвы матэрыялаў з індэксамі суцэльных цел, якія будуць ужывацца, калі на гэты аб'ект спасылаюцца ў іншых файлах @@ -3999,7 +3997,7 @@ Building creation aborted. If true, when activated, the working plane will automatically adapt to this level - If true, when activated, the working plane will automatically adapt to this level + Калі птушка, калі задзейнічае працоўная плоскасць, яна аўтаматычна адаптуецца да гэтага ўзроўню @@ -4019,7 +4017,7 @@ Building creation aborted. If True, double-clicking this object in the tree activates it - If True, double-clicking this object in the tree activates it + Калі птушка, падвоеная пстрычка па гэтым аб'екце ў дрэве задзейнічае яго @@ -4069,7 +4067,7 @@ Building creation aborted. Turn cutting on when activating this level - Turn cutting on when activating this level + Уключае абрэзку, калі задзейнічалі гэты ўзровень @@ -4125,7 +4123,7 @@ Building creation aborted. Thickness of the web - Thickness of the web + Таўшчыня стрыжня @@ -4141,7 +4139,7 @@ Building creation aborted. Thickness of the webs - Thickness of the webs + Таўшчыня стрыжняў @@ -4202,7 +4200,7 @@ Building creation aborted. A URL that shows this site in a mapping website - A URL that shows this site in a mapping website + URL-адрас, які паказвае гэтую мясцовасць на супастаўленым інтэрнэт-сайце @@ -4240,7 +4238,7 @@ Building creation aborted. An extrusion vector to use when performing boolean operations - An extrusion vector to use when performing boolean operations + Вектар выдушвання, які ўжываецца пры выкананні лагічных аперацый @@ -4391,12 +4389,12 @@ Building creation aborted. The latest time stamp of the linked file - The latest time stamp of the linked file + Апошняя пазнака часу звязанага файла If true, the colors from the linked file will be kept updated - If true, the colors from the linked file will be kept updated + Калі птушка, колер з звязанага файла будзе заўсёды абнаўляцца @@ -5036,7 +5034,7 @@ Building creation aborted. The linked object - The linked object + Звязаны аб'ект @@ -5126,7 +5124,7 @@ Building creation aborted. The linked Panel cuts - The linked Panel cuts + Звязаныя выразы панэляў @@ -5291,17 +5289,17 @@ Building creation aborted. The diameter of this pipe, if not based on a profile - The diameter of this pipe, if not based on a profile + Дыяметр гэтага трубаправода, калі не заснаваны на профілі The length of this pipe, if not based on an edge - The length of this pipe, if not based on an edge + Даўжыня гэтага трубаправода, калі не заснаваны на рабры An optional closed profile to base this pipe on - An optional closed profile to base this pipe on + Неабавязковы замкнуты профіль для асновы гэтага трубаправода @@ -5316,7 +5314,7 @@ Building creation aborted. The wall thickness of this pipe, if not based on a profile - The wall thickness of this pipe, if not based on a profile + Таўшчыня сценкі гэтага трубаправода, калі не заснаваны на профілі @@ -5326,7 +5324,7 @@ Building creation aborted. The pipes linked by this connector - The pipes linked by this connector + Трубаправоды, якія звязаныя гэтым злучэннем @@ -5515,7 +5513,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available @@ -5643,7 +5641,7 @@ Building creation aborted. Show the cut in the 3D view - Show the cut in the 3D view + Паказаць перасек у трохмерным прадстаўленні @@ -5658,7 +5656,7 @@ Building creation aborted. Show the label in the 3D view - Show the label in the 3D view + Паказаць метку ў трохмерным прадстаўленні @@ -5695,7 +5693,7 @@ Building creation aborted. If checked, source objects are displayed regardless of being visible in the 3D model - If checked, source objects are displayed regardless of being visible in the 3D model + Калі птушка, зыходныя аб'екты адлюстроўваюцца незалежна ад таго, ці бачныя яны ў трохмернай мадэлі @@ -5943,7 +5941,7 @@ Building creation aborted. BuildingPart - BuildingPart + Будаўнічая дэталь @@ -5999,7 +5997,7 @@ Building creation aborted. Pipe tools - Pipe tools + Інструменты трубаправода @@ -6059,7 +6057,7 @@ Building creation aborted. Annotation - Annotation + Заметка @@ -6111,7 +6109,7 @@ Building creation aborted. Roof - Roof + Дах @@ -6163,7 +6161,7 @@ Building creation aborted. Frame - Frame + Каркас @@ -6302,7 +6300,7 @@ Building creation aborted. Grid - Grid + Сетка @@ -6337,7 +6335,7 @@ Building creation aborted. The type of 3D points produced by this grid object - The type of 3D points produced by this grid object + Тыпы трохмерных кропак, якія ствараюцца гэтым аб'ектам сеткі @@ -6388,7 +6386,7 @@ Building creation aborted. Panel Cut - Panel Cut + Выраз панэлі @@ -6454,7 +6452,7 @@ Building creation aborted. Creates a pipe object from a given Wire or Line - Creates a pipe object from a given Wire or Line + Стварае аб'ект трубаправода з зададзенай ломанай лінія ці лініі @@ -6467,7 +6465,7 @@ Building creation aborted. Creates a connector between 2 or 3 selected pipes - Creates a connector between 2 or 3 selected pipes + Стварае злучэнне паміж двума ці трыма абранымі трубаправодамі @@ -6476,7 +6474,7 @@ Building creation aborted. Pipe tools - Pipe tools + Інструменты трубаправода @@ -6714,12 +6712,12 @@ Building creation aborted. Toggle IFC Brep flag - Toggle IFC Brep flag + Пераключыць флаг IFC B-Rep Force an object to be exported as Brep or not - Force an object to be exported as Brep or not + Прымусова экспартаваць аб'ект як B-Rep, ці не @@ -6766,12 +6764,12 @@ Building creation aborted. Toggle subcomponents - Toggle subcomponents + Пераключыць укладзеныя кампаненты Shows or hides the subcomponents of this object - Shows or hides the subcomponents of this object + Паказвае ці хавае ўкладзеныя кампаненты гэтага аб'екта diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.qm b/src/Mod/Arch/Resources/translations/Arch_ca.qm index 5570202f7c..cc9363d750 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ca.qm and b/src/Mod/Arch/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index fe4912499a..c3826b84fa 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -1592,7 +1592,7 @@ Note: The serializer is still an experimental feature! All FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - Totes les propietats d'objecte de FreeCAD s'emmagatzemaran dins dels objectes exportats, i això permet tornar a crear un model paramètric complet en tornar a importar. + Totes les propietats d'objecte del FreeCAD s'emmagatzemaran dins dels objectes exportats, i això permet tornar a crear un model paramètric complet en tornar a importar. @@ -1717,22 +1717,22 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Column - Column + Columna Create Structures From Selection - Create Structures From Selection + Crea estructures a partir de la selecció Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Seleccioneu primer l'objecte base i després les vores que voleu utilitzar com a camins d'extrusió Create Structural System - Create Structural System + Crea un sistema estructural @@ -1743,7 +1743,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Create Structure - Create Structure + Crea una estructura @@ -1759,17 +1759,17 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Next point - Next point + Punt següent Structure options - Structure options + Opcions de l'estructura Drawing mode - Drawing mode + Mode de dibuix @@ -1821,7 +1821,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Con&tinue - Con&tinue + Con&tinua @@ -1853,7 +1853,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Edit nodes - Edit nodes + Edita els nodes @@ -1868,7 +1868,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Connect nodes - Connect nodes + Connecta els nodes @@ -1888,7 +1888,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Extrusion Tools - Extrusion Tools + Eines d'extrusió @@ -1962,7 +1962,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Create Equipment - Create Equipment + Crea un equipament @@ -1992,7 +1992,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Create 3 views - Create 3 views + Crea 3 vistes @@ -2002,7 +2002,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Create BuildingPart - Create BuildingPart + Crea la part d'un edifici @@ -2050,17 +2050,17 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Create profile - Create profile + Crea un perfil Profile settings - Profile settings + Preferències del perfil Create Profile - Create Profile + Crea un perfil @@ -2096,23 +2096,23 @@ Site creation aborted. Create Site - Create Site + Crea un lloc Create Roof - Create Roof + Crea un sostre Unable to create a roof - Unable to create a roof + No s'ha pogut crear un sostre - + Please select a base object Please select a base object @@ -2155,12 +2155,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Angle (deg) - Angle (deg) + Angle (graus) Run (mm) - Run (mm) + Distància (mm) @@ -2220,17 +2220,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Reload reference - Reload reference + Torna a carregar la referència Open reference - Open reference + Obre la referència Create external reference - Create external reference + Crea una referència externa @@ -2248,7 +2248,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Frame - Create Frame + Crea un marc @@ -2315,7 +2315,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Window - Create Window + Crea una finestra @@ -2367,7 +2367,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to create component - Unable to create component + No s'ha pogut crear el component @@ -2393,7 +2393,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2403,7 +2403,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Afegeix @@ -2419,7 +2419,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Edita @@ -2427,7 +2427,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create/update component - Create/update component + Crea/actualitza el component @@ -2442,14 +2442,14 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Components Create new component - Create new component + Crea un component nou @@ -2460,7 +2460,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipus @@ -2529,7 +2529,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Axis System - Create Axis System + Crea un sistema d'eixos @@ -2539,7 +2539,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -2559,7 +2559,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - Truss + Gelosia @@ -2571,7 +2571,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Truss - Create Truss + Crea una gelosia @@ -2601,22 +2601,22 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Project - Create Project + Crea un projecte Create Stairs - Create Stairs + Crea unes escales Create material - Create material + Crea un material Create multi-material - Create multi-material + Crea un material múltiple @@ -2663,12 +2663,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela file %s successfully created. - file %s successfully created. + el fitxer %s s'ha creat correctament. Create Grid - Create Grid + Crea una quadrícula @@ -2718,17 +2718,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add col - Add col + Afegeix una columna Del col - Del col + Suprimeix una columna Create span - Create span + Crea una extensió @@ -2743,7 +2743,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Columns - Columns + Columnes @@ -2783,7 +2783,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Number of holes - Number of holes + Nombre de forats @@ -2868,7 +2868,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Level - Level + Nivell @@ -2885,28 +2885,28 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of - View of + Vista de Create Panel - Create Panel + Crea un plafó Create Panel Cut - Create Panel Cut + Crea un tall de plafó Create Panel Sheet - Create Panel Sheet + Crea un full de plafó Error computing shape of - Error computing shape of + S'ha produït un error en calcular la forma de @@ -2916,12 +2916,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Edit views positions - Edit views positions + Edita les posicions de les vistes This object has no face - This object has no face + Aquest objecte no té cap cara @@ -2932,13 +2932,13 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Curtain Wall - Create Curtain Wall + Crea un mur cortina Create Pipe - Create Pipe + Crea un tub @@ -2953,7 +2953,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Connector - Create Connector + Crea un connector @@ -3052,7 +3052,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3098,12 +3098,12 @@ Floor creation aborted. Create Floor - Create Floor + Crea el terra Create Axis - Create Axis + Crea un eix @@ -3142,17 +3142,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3163,103 +3163,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objectes - + Fixtures Fixtures - + Group Grup - + Hosts Amfitrions - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Propietat - + Add property... Add property... - + Add property set... Add property set... - + New... Nou... - + New property New property - + New property set New property set @@ -3267,7 +3267,7 @@ Floor creation aborted. Create Rebar - Create Rebar + Crea una armadura corrugada @@ -3277,7 +3277,7 @@ Floor creation aborted. Create Section Plane - Create Section Plane + Crea un pla de secció @@ -3394,12 +3394,12 @@ Building creation aborted. Create Building - Create Building + Crea un edifici Create Space - Create Space + Crea un espai @@ -3414,7 +3414,7 @@ Building creation aborted. Wall - Wall + Mur @@ -3426,7 +3426,7 @@ Building creation aborted. Create Wall - Create Wall + Crea un mur @@ -3436,7 +3436,7 @@ Building creation aborted. Wall options - Wall options + Opcions de mur @@ -3446,7 +3446,7 @@ Building creation aborted. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - This list shows all the MultiMaterials objects of this document. Create some to define wall types. + Aquesta llista mostra tots els objectes multimaterials del document. Creeu-ne alguns per a definir els tipus de mur. @@ -3512,12 +3512,12 @@ Building creation aborted. is not closed - is not closed + no està tancat is not valid - is not valid + no és vàlid @@ -3552,12 +3552,12 @@ Building creation aborted. Copy Length - Copy Length + Copia la longitud Copy Area - Copy Area + Copia l'àrea @@ -3593,7 +3593,7 @@ Building creation aborted. Add space boundary - Add space boundary + Afegeix un límit d'espai @@ -3623,13 +3623,13 @@ Building creation aborted. All good! No problems found - All good! No problems found + Tot correcte! No s'ha trobat cap problema Create Component - Create Component + Crea un component @@ -3644,7 +3644,7 @@ Building creation aborted. Create IFC properties spreadsheet - Create IFC properties spreadsheet + Crea el full de càlcul de propietats IFC @@ -3657,7 +3657,7 @@ Building creation aborted. Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Crea múltiples objectes d'estructura d'arc a partir d'una base seleccionada, utilitzant cada aresta seleccionada com a camí d'extrusió @@ -3665,12 +3665,12 @@ Building creation aborted. Structural System - Structural System + Sistema estructural Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Crea un objecte del sistema estructural a partir d'una estructura i un eix seleccionats @@ -3683,7 +3683,7 @@ Building creation aborted. Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) - Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) + Crea un objecte d'estructura des de zero o des d'un objecte seleccionat (esbós, fil, cara o sòlid) @@ -4510,27 +4510,27 @@ Building creation aborted. The angle of the truss - The angle of the truss + L'angle de la gelosia The slant type of this truss - The slant type of this truss + El tipus d'inclinació d'aquesta gelosia The normal direction of this truss - The normal direction of this truss + La direcció normal d'aquesta gelosia The height of the truss at the start position - The height of the truss at the start position + L'alçària de la gelosia en la posició inicial The height of the truss at the end position - The height of the truss at the end position + L'alçària de la gelosia en la posició final @@ -4545,17 +4545,17 @@ Building creation aborted. The height of the main top and bottom elements of the truss - The height of the main top and bottom elements of the truss + L'alçària dels elements principals superiors i inferiors de la gelosia The width of the main top and bottom elements of the truss - The width of the main top and bottom elements of the truss + L'amplària dels elements principals superiors i inferiors de la gelosia The type of the middle element of the truss - The type of the middle element of the truss + El tipus de l'element central de la gelosia @@ -5484,7 +5484,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available @@ -5904,7 +5904,7 @@ Building creation aborted. Creates 3 views (top, front, side) from a mesh-based object - Creates 3 views (top, front, side) from a mesh-based object + Crea 3 vistes (planta, alçat, perfil) a partir d'un objecte basat en una malla @@ -6163,7 +6163,7 @@ Building creation aborted. Creates an axis system from a set of axes - Creates an axis system from a set of axes + Crea un sistema d'eixos a partir d'un conjunt d'eixos @@ -6171,7 +6171,7 @@ Building creation aborted. Truss - Truss + Gelosia @@ -6362,7 +6362,7 @@ Building creation aborted. Creates 2D views of selected panels - Creates 2D views of selected panels + Crea vistes 2D dels plafons seleccionats @@ -6466,7 +6466,7 @@ Building creation aborted. Level - Level + Nivell @@ -6484,7 +6484,7 @@ Building creation aborted. Creates a set of axes - Creates a set of axes + Crea un conjunt d'eixos @@ -6540,7 +6540,7 @@ Building creation aborted. Wall - Wall + Mur @@ -6566,12 +6566,12 @@ Building creation aborted. Add component - Add component + Afegeix un component Adds the selected components to the active object - Adds the selected components to the active object + Afegeix els components seleccionats a l'objecte actiu @@ -6579,7 +6579,7 @@ Building creation aborted. Remove component - Remove component + Elimina el component @@ -6701,7 +6701,7 @@ Building creation aborted. Creates an undefined architectural component - Creates an undefined architectural component + Crea un component arquitectònic no definit @@ -6722,12 +6722,12 @@ Building creation aborted. Create IFC spreadsheet... - Create IFC spreadsheet... + Crea un full de càlcul IFC... Creates a spreadsheet to store IFC properties of an object. - Creates a spreadsheet to store IFC properties of an object. + Crea un full de càlcul per a emmagatzemar les propietats IFC d'un objecte. diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 29786110d0..c73d8d69e6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -2144,7 +2144,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2425,7 +2425,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2435,7 +2435,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Přidat @@ -2451,7 +2451,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Upravit @@ -2474,7 +2474,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Komponenty @@ -2492,7 +2492,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Typ @@ -2571,7 +2571,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3084,7 +3084,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Hodnota @@ -3174,17 +3174,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3195,103 +3195,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objekty - + Fixtures Fixtures - + Group Skupina - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Vlastnost - + Add property... Add property... - + Add property set... Add property set... - + New... Nový... - + New property New property - + New property set New property set @@ -5516,7 +5516,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index a8ff31337d..fe2d2a3d7f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -2119,7 +2119,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2400,7 +2400,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2410,7 +2410,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Hinzufügen @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Bearbeiten @@ -2449,7 +2449,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Komponenten @@ -2467,7 +2467,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Typ @@ -2546,7 +2546,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3059,7 +3059,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Wert @@ -3149,17 +3149,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3170,103 +3170,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Unterkomponenten umschalten - + Closing Sketch edit Closing Sketch edit - + Component Komponente - + Components of this object Komponenten dieses Objektes - + Base component Basiskomponente - + Additions Ergänzungen - + Subtractions Subtractions - + Objects Objekte - + Fixtures Armaturen - + Group Gruppe - + Hosts Ursprung - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Eigenschaft - + Add property... Eigenschaft hinzufügen... - + Add property set... Add property set... - + New... Neu... - + New property Neue Eigenschaft - + New property set New property set @@ -5491,7 +5491,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index 78c0a26531..6e653ff00b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -2141,7 +2141,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2422,7 +2422,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2432,7 +2432,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Προσθήκη @@ -2448,7 +2448,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Επεξεργασία @@ -2471,7 +2471,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Στοιχεία @@ -2489,7 +2489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Τύπος @@ -2568,7 +2568,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3081,7 +3081,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Τιμή @@ -3171,17 +3171,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3192,103 +3192,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Αντικείμενα - + Fixtures Fixtures - + Group Ομάδα - + Hosts Γονικά στοιχεία - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Ιδιότητα - + Add property... Add property... - + Add property set... Add property set... - + New... Νέο... - + New property New property - + New property set New property set @@ -5513,7 +5513,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts index 716b283733..c8932a7150 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts @@ -2141,7 +2141,7 @@ Site creation aborted. - + Please select a base object Por favor, seleccione un objeto base @@ -2422,7 +2422,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2432,7 +2432,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Agregar @@ -2448,7 +2448,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar @@ -2471,7 +2471,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Componentes @@ -2489,7 +2489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipo @@ -2568,7 +2568,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Ejes @@ -3081,7 +3081,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3171,17 +3171,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3192,103 +3192,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objetos - + Fixtures Fijaciones - + Group Grupo - + Hosts Hosts - + Edit IFC properties Editar propiedades IFC - + Edit standard code Editar código estándar - + Property Propiedad - + Add property... Añadir propiedad... - + Add property set... Añadir conjunto de propiedades... - + New... Nuevo... - + New property Nueva propiedad - + New property set Nuevo conjunto de propiedades @@ -5513,7 +5513,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index 639ee97879..2f6bf0a3fe 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -2141,7 +2141,7 @@ Site creation aborted. - + Please select a base object Por favor, seleccione un objeto base @@ -2422,7 +2422,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2432,7 +2432,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Añadir @@ -2448,7 +2448,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar @@ -2471,7 +2471,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Componentes @@ -2489,7 +2489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipo @@ -2568,7 +2568,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Ejes @@ -3081,7 +3081,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3171,17 +3171,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3192,103 +3192,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objetos - + Fixtures Fijaciones - + Group Grupo - + Hosts Hosts - + Edit IFC properties Editar propiedades IFC - + Edit standard code Editar código estándar - + Property Propiedades - + Add property... Añadir propiedad... - + Add property set... Añadir conjunto de propiedades... - + New... Nuevo... - + New property Nueva propiedad - + New property set Nuevo conjunto de propiedades @@ -5513,7 +5513,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index 8736654007..70bd09c42c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index 3769b8d014..6897a76303 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -2143,7 +2143,7 @@ Gunearen sorrera utzi egin da. - + Please select a base object Hautatu oinarri-objektu bat @@ -2424,7 +2424,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Remove @@ -2434,7 +2434,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Add Gehitu @@ -2450,7 +2450,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Edit Editatu @@ -2473,7 +2473,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Components Osagaiak @@ -2491,7 +2491,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Type Mota @@ -2570,7 +2570,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Axes Ardatzak @@ -3083,7 +3083,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Value Balioa @@ -3173,17 +3173,17 @@ Solairuaren sorrera utzi egin da. Ongi inportatu da - + Error computing the shape of this object Errorea objektu honen forma kalkulatzean - + has no solid ez du solidorik - + has an invalid shape baliogabeko forma du @@ -3194,103 +3194,103 @@ Solairuaren sorrera utzi egin da. - + has a null shape forma nulua du - + Toggle subcomponents Txandakatu azpiosagaiak - + Closing Sketch edit Krokisaren edizioa ixten - + Component Osagaia - + Components of this object Objektu honen osagaiak - + Base component Oinarrizko osagaia - + Additions Gehiketak - + Subtractions Kenketak - + Objects Objektuak - + Fixtures Finkapenak - + Group Taldea - + Hosts Ostalariak - + Edit IFC properties Editatu IFC propietateak - + Edit standard code Editatu kode estandarra - + Property Propietatea - + Add property... Gehitu propietatea... - + Add property set... Gehitu propietate multzoa... - + New... Berria... - + New property Propietate berria - + New property set Propietate multzo berria @@ -5281,27 +5281,27 @@ Eraikinaren sorrera utzi egin da. Centers the profile over the edges or not - Centers the profile over the edges or not + Profila ertzen gainean zentratzen du edo ez The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + Objektu honek norabide bertikalak/horizontalak ondorioztatzeko erabiliko duen erreferentziako norabide bertikala. Mantendu ezazu zure errezel-paretaren uneko norabide bertikaletik hurbil. The diameter of this pipe, if not based on a profile - The diameter of this pipe, if not based on a profile + Hodi honen diametroa, profil batean oinarrituta ez badago The length of this pipe, if not based on an edge - The length of this pipe, if not based on an edge + Hodi honen luzera, ertz batean oinarrituta ez badago An optional closed profile to base this pipe on - An optional closed profile to base this pipe on + Aukerako profil itxi bat, hodi honek oinarritzat izango duena @@ -5515,7 +5515,7 @@ Eraikinaren sorrera utzi egin da. Aukerako ardatz bat, edo ardatz-sistema bat, objektu hau bikoizteko - + Use the material color as this object's shape color, if available Erabili materialaren kolorea objektu honen formaren kolore gisa, erabilgarri badago @@ -6771,7 +6771,7 @@ Eraikinaren sorrera utzi egin da. Shows or hides the subcomponents of this object - Shows or hides the subcomponents of this object + Objektu honen azpiosagaiak erakusten edo ezkutatzen ditu diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index 12bb59f99c..08e0630b9b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Lisää @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Muokkaa @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Osat @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tyyppi @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Arvo @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objektit - + Fixtures Fixtures - + Group Ryhmä - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Ominaisuus - + Add property... Add property... - + Add property set... Add property set... - + New... Uusi ... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 7e19c23da4..bd12d87293 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -2113,7 +2113,7 @@ La création du site est abandonnée. - + Please select a base object Sélectionner un objet de base @@ -2394,7 +2394,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Remove @@ -2404,7 +2404,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Add Ajouter @@ -2420,7 +2420,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Edit Éditer @@ -2443,7 +2443,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Components Composants @@ -2461,7 +2461,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Type Type @@ -2540,7 +2540,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Axes Axes @@ -3053,7 +3053,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Value Valeur @@ -3143,17 +3143,17 @@ La création du niveau est abandonnée. Importation réussie - + Error computing the shape of this object Erreur lors du calcul de la forme de cet objet - + has no solid n'a aucun solide - + has an invalid shape a une forme non valide @@ -3164,103 +3164,103 @@ La création du niveau est abandonnée. - + has a null shape a une forme nulle - + Toggle subcomponents Activer/désactiver les sous-composants - + Closing Sketch edit Fermeture de l'édition de l'esquisse - + Component Composant - + Components of this object Composants de cet objet - + Base component Composant de base - + Additions Ajouts - + Subtractions Soustractions - + Objects Objets - + Fixtures Accessoires - + Group Groupe - + Hosts Hôtes - + Edit IFC properties Éditer les propriétés IFC - + Edit standard code Éditer le code standard - + Property Propriété - + Add property... Ajouter une propriété... - + Add property set... Ajouter un ensemble de propriétés... - + New... Nouveau... - + New property Nouvelle propriété - + New property set Nouvel ensemble de propriétés @@ -5485,7 +5485,7 @@ La création du bâtiment est abandonnée. Un axe optionnel ou un système d’axe sur lequel cet objet devrait être dupliqué - + Use the material color as this object's shape color, if available Utiliser la couleur du matériau comme couleur pour la forme de cet objet, si disponsible diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index b15d5f5217..c9ea2f6697 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Engadir @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Compoñentes @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipo @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Obxectos - + Fixtures Fixtures - + Group Grupo - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Propiedade - + Add property... Add property... - + Add property set... Add property set... - + New... Novo... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index d901747e2c..1aacd23b8f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -2162,7 +2162,7 @@ Stvaranje Parcele prekinuto. - + Please select a base object Odaberite osnovni objekt @@ -2455,7 +2455,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Remove @@ -2465,7 +2465,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Add Dodaj @@ -2481,7 +2481,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Edit Uredi @@ -2504,7 +2504,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Components Komponente @@ -2522,7 +2522,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Type Tip @@ -2605,7 +2605,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Axes Osi @@ -3118,7 +3118,7 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Value Vrijednost @@ -3208,17 +3208,17 @@ Stvaranje etaže prekinuto. Uspješno uvezen - + Error computing the shape of this object Pogreška u proračunu oblika ovog objekta - + has no solid ovo je bez čvrstog tijela - + has an invalid shape ima jedan neispravan oblik @@ -3229,103 +3229,103 @@ Stvaranje etaže prekinuto. - + has a null shape ima jedan ništavni oblik - + Toggle subcomponents Uključivanje/isključivanje podsastavnice - + Closing Sketch edit Zatvori uređivanje Skice - + Component Komponenta - + Components of this object Komponenta ovog objekta - + Base component Osnovna Komponenta - + Additions Sabiranje - + Subtractions Oduzimanje - + Objects Objekti - + Fixtures Armatura - + Group Grupa - + Hosts Domaćini - + Edit IFC properties Uredi IFC osobine - + Edit standard code Uredi standardni kod - + Property Svojstva - + Add property... Dodaj svojstvo... - + Add property set... Dodaj skup svojstava... - + New... Novi ... - + New property Novo svojstvo - + New property set Skup novih svojstava @@ -5579,7 +5579,7 @@ Stvaranje zgrade prekinuto. Opcionalna Os ili sustav Osi na kojem će objekt biti dupliciran - + Use the material color as this object's shape color, if available Koristite boju materijala kao boju oblika ovog objekta, ako je dostupna diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index f611a20eec..7cd97f53d7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 28307bb8cf..3c005df0ea 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -2145,7 +2145,7 @@ Szint létrehozása megszakítva. - + Please select a base object Kérjük válassza ki az alap tárgyat @@ -2426,7 +2426,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Remove @@ -2436,7 +2436,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Add Hozzáad @@ -2452,7 +2452,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Edit Szerkesztés @@ -2475,7 +2475,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Components Összetevők @@ -2493,7 +2493,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Type Típus @@ -2572,7 +2572,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Axes Tengelyek @@ -3085,7 +3085,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Value Érték @@ -3175,17 +3175,17 @@ Szint létrehozása megszakítva. Sikeresen importálva - + Error computing the shape of this object Hiba a tárgy alakjának számítása közben - + has no solid nem szilárd test - + has an invalid shape van egy érvénytelen alakzat @@ -3196,103 +3196,103 @@ Szint létrehozása megszakítva. - + has a null shape van egy nulla alakja - + Toggle subcomponents Al összetevők ki-/ bekapcsolása - + Closing Sketch edit Vázlat szerkesztés bezárása - + Component Összetevő - + Components of this object Ennek a tárgynak az elemei - + Base component Alap összetevő - + Additions Kiegészítők - + Subtractions Kivonás - + Objects Objektumok - + Fixtures Berendezési tárgyak - + Group Csoport - + Hosts Állomások - + Edit IFC properties IFC tulajdonságok szerkesztése - + Edit standard code Szabványos kód szerkesztése - + Property Tulajdonság - + Add property... Tulajdonság hozzádása... - + Add property set... Tulajdonság készlet hozzádása... - + New... Új... - + New property Új tulajdonság - + New property set Új tulajdonságkészlet @@ -3396,7 +3396,7 @@ Szint létrehozása megszakítva. Centers the plane on the objects in the list above - Centers the plane on the objects in the list above + Sík középpontja a fenti listában szereplő tátgyakon @@ -3407,79 +3407,79 @@ Building object is not allowed to accept Site and Building objects. Site and Building objects will be removed from the selection. You can change that in the preferences. - You can put anything but Site and Building objects in a Building object. + Bármin tehet az Épület tárgyba, csak nem Telket vagy Épületet. -Building object is not allowed to accept Site and Building objects. +Épület tárgynak tilos Telek és Épület tárgy elfogadása. -Site and Building objects will be removed from the selection. +Telek és épület tárgyak eltávolításra kerülnek a kijelölésből. -You can change that in the preferences. +Ezt módosíthatja a beállításokban. There is no valid object in the selection. Building creation aborted. - There is no valid object in the selection. + Nem található érvényes tárgy a kiválasztásban. -Building creation aborted. +Épület létrehozás megszakítva. Create Building - Create Building + Épület létrehozás Create Space - Create Space + Térköz létrehozás Set text position - Set text position + Szöveg helyzet beállítása Space boundaries - Space boundaries + Terület határvonalak Wall - Wall + Fal Walls can only be based on Part or Mesh objects - Walls can only be based on Part or Mesh objects + Falat csak az Alkotórész vagy Háló tátgyhoz húzhat Create Wall - Create Wall + Fal létrehozás First point of wall - First point of wall + Fal első pontja Wall options - Wall options + Fal lehetőségek Wall Presets... - Wall Presets... + Fal előre beállított értékei... This list shows all the MultiMaterials objects of this document. Create some to define wall types. - This list shows all the MultiMaterials objects of this document. Create some to define wall types. + A lista mutatja a MultiMaterial elemeket ehhez a dokumentumhoz. Fal típusok definiálásához. @@ -3504,33 +3504,33 @@ Building creation aborted. Merge Wall - Merge Wall + Fal egyesítése The selected wall contains no subwall to merge - The selected wall contains no subwall to merge + A kijelölt fal nem tartalmaz összeegyeztethető fal részleteket Please select only wall objects - Please select only wall objects + Kérem csak fal tárgyakat válasszon ki Merge Walls - Merge Walls + Falak egyesítése Cannot compute blocks for wall - Cannot compute blocks for wall + Képtelen blokkokat számolni a falhoz Error: Unable to modify the base object of this wall - Error: Unable to modify the base object of this wall + Hiba: Nem lehet módosítani ennek a falnak az alap kiinduló tárgyát @@ -3540,12 +3540,12 @@ Building creation aborted. Invalid cutplane - Invalid cutplane + Érvénytelen kivágási séma is not closed - is not closed + ez nem zárt @@ -3852,90 +3852,90 @@ Building creation aborted. The element numbers to exclude when this structure is based on axes - The element numbers to exclude when this structure is based on axes + A kihúzandó elemek száma, ha az tengelyeken alapul If true the element are aligned with axes - If true the element are aligned with axes + Ha igaz, akkor az elem tengelyekkel igazodik The model description of this equipment - The model description of this equipment + Ennek a berendezési tárgynak a modell leírása The URL of the product page of this equipment - The URL of the product page of this equipment + Ennek a berendezési tàrgy oldalának az url elérési címe A standard code (MasterFormat, OmniClass,...) - A standard code (MasterFormat, OmniClass,...) + Egy szabványos kód (MasterFormat, OmniClass,...) Additional snap points for this equipment - Additional snap points for this equipment + Ennek az eszköznek a további hozzáigazító pontjai The electric power needed by this equipment in Watts - The electric power needed by this equipment in Watts + Ehhez az eszközhöz szükséges elektromos áram Wattban The type of this building - The type of this building + Ennek az épületnek a típusa The height of this object - The height of this object + Ennek a tárgynak a magassága If true, the height value propagates to contained objects - If true, the height value propagates to contained objects + Ha igaz, a magasság értéke a tartalmazott tátgyakra is kiterjed The level of the (0,0,0) point of this level - The level of the (0,0,0) point of this level + Ennek a szintnek a (0,0,0) pont szintje The computed floor area of this floor - The computed floor area of this floor + Ennek a szintnek a számított alapterülete An optional description for this component - An optional description for this component + Egy lehetséges leírás ehhez az összetevőhöz An optional tag for this component - An optional tag for this component + Egy lehetséges címke ehhez az összetevőhöz The shape of this object - The shape of this object + Ennek a tárgynak az alakja This property stores an inventor representation for this object - This property stores an inventor representation for this object + Ez a tulajdonság tárolja a tárgy feltalálójának kilétét @@ -4163,43 +4163,43 @@ Building creation aborted. The street and house number of this site, with postal box or apartment number if needed - The street and house number of this site, with postal box or apartment number if needed + Ennek a területnek az utca és házszáma, posta fiókkal vagy a lakás számmal szükség esetén The postal or zip code of this site - The postal or zip code of this site + Ennek a területnek a postai vagy irányítószáma The city of this site - The city of this site + A városhoz ezen a területen The region, province or county of this site - The region, province or county of this site + Ehhez a területhez tartozó régió, tartomány vagy megye The country of this site - The country of this site + A terület országa The latitude of this site - The latitude of this site + Ehhez a területhez tartozó szélesség Angle between the true North and the North direction in this document - Angle between the true North and the North direction in this document + A valódi észak és az ebben a dokumentumban lévő északi irány közti különbség The elevation of level 0 of this site - The elevation of level 0 of this site + Ennek a területnek a magassági 0 szintje @@ -4210,557 +4210,557 @@ Building creation aborted. Other shapes that are appended to this object - Other shapes that are appended to this object + Ehhez a tárgyhoz csatolt egyéb alakzatok Other shapes that are subtracted from this object - Other shapes that are subtracted from this object + Ebből a tárgyból kivált egyéb alakzatok The area of the projection of this object onto the XY plane - The area of the projection of this object onto the XY plane + Ennek a tárgynak az XY síkra vetített vetületének területe The perimeter length of this terrain - The perimeter length of this terrain + Ennek a terepnek a kerület hossza The volume of earth to be added to this terrain - The volume of earth to be added to this terrain + Ehhez a terephez adandó föld térfogata The volume of earth to be removed from this terrain - The volume of earth to be removed from this terrain + Ebből a terepből kivonandó föld térfogata An extrusion vector to use when performing boolean operations - An extrusion vector to use when performing boolean operations + Logikai művelet végzése során használatos kihúzási vektor Remove splitters from the resulting shape - Remove splitters from the resulting shape + Távolítsa el az eredményül kapott alakzat darabolóit An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates + A modell (0,0,0) eredetű és a geocoordináták által megjelölt pont közötti választható eltolás The type of this object - The type of this object + Ennek a tárgynak a típusa The time zone where this site is located - The time zone where this site is located + Az adott (földrajzi!) hely időzónája An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one - An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one + Egy opcionális EPW fájl ennek az területnek a helyzetéhez. A webhely dokumentációjában megtudhatja, hogyan szerezhet be egyet Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + Mutassa vagy nem, a szél rózsa diagramot. Napenergia diagram léptéket használ. Szükséges a katicabogár modul Show solar diagram or not - Show solar diagram or not + Szoláris ábrát megjeleníti vagy nem The scale of the solar diagram - The scale of the solar diagram + Szoláris diagram léptéke The position of the solar diagram - The position of the solar diagram + Nap helyzet diagram The color of the solar diagram - The color of the solar diagram + Nap diagram színe When set to 'True North' the whole geometry will be rotated to match the true north of this site - When set to 'True North' the whole geometry will be rotated to match the true north of this site + Ha beállított az "igazi észak", az egész geometria forgatva lesz, hogy megfeleljen az oldal igazi északi részéhez Show compass or not - Show compass or not + Tájoló megjelenítésének ki/be kapcsolása The rotation of the Compass relative to the Site - The rotation of the Compass relative to the Site + Iránytű forgatása az oldalhoz viszonyítva The position of the Compass relative to the Site placement - The position of the Compass relative to the Site placement + Iránytű elhelyezkedése az oldal elhelyezkedéséhez viszonyítva Update the Declination value based on the compass rotation - Update the Declination value based on the compass rotation + A deklináció értékének frissítése az iránytű elfordulása alapján The list of angles of the roof segments - The list of angles of the roof segments + Tető szegmensek szögeinek listája The list of horizontal length projections of the roof segments - The list of horizontal length projections of the roof segments + Tető szegmensek vízszintes hossz vetületeinek listája The list of IDs of the relative profiles of the roof segments - The list of IDs of the relative profiles of the roof segments + Tető szegmensek relatív profilojai azonosítóinak listája The list of thicknesses of the roof segments - The list of thicknesses of the roof segments + Tető szegmensek vastagságának listája The list of overhangs of the roof segments - The list of overhangs of the roof segments + Tető szegmensek túlnyúlásainak listája The list of calculated heights of the roof segments - The list of calculated heights of the roof segments + Tetőszakaszok számított magasságainak listája The face number of the base object used to build the roof - The face number of the base object used to build the roof + A tető építéséhez használt alap tárgy felületeinek száma The total length of the ridges and hips of the roof - The total length of the ridges and hips of the roof + A tető orom éleknek és tető éleknek a teljes hossza The total length of the borders of the roof - The total length of the borders of the roof + A tetőhöz tartozó szegélyeknek a teljes hossza Specifies if the direction of the roof should be flipped - Specifies if the direction of the roof should be flipped + Megadja, hogy a tető irányát tükrözni kell-e The base file this component is built upon - The base file this component is built upon + Összetevő alap fájlja ebből épült The part to use from the base file - The part to use from the base file + Az alap fájlból felhasznált alkatrész The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation - The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation + A hivatkozott tárgy aktuális dokumentumba való beillesztésének módja. Az 'Alapértelmezett' magában foglalja az alakzatot, a 'Átmeneti' elveti az alakzatot, amikor a tárgy ki van kapcsolva (kisebb fájlméret), az 'Egyszerű' nem importálja az alakzatot, hanem csak az OpenInventor ábrázolást Fuse objects of same material - Fuse objects of same material + Azonos anyagú tárgyak összekapcsolása The latest time stamp of the linked file - The latest time stamp of the linked file + A linkelt fájl legutóbbi időbélyege If true, the colors from the linked file will be kept updated - If true, the colors from the linked file will be kept updated + Ha igaz, a csatolt fájlból felhasznált szín folyamatosan frissül The profile used to build this frame - The profile used to build this frame + Ennek a keretnek az építéséhez használt profil Specifies if the profile must be aligned with the extrusion wires - Specifies if the profile must be aligned with the extrusion wires + Itt adható meg, ha a felületet összhangba kell hozni a kihúzás dróthálókkal An offset vector between the base sketch and the frame - An offset vector between the base sketch and the frame + Egy eltolási vektor az alap vázlat és a keret között Crossing point of the path on the profile. - Crossing point of the path on the profile. + Kereszteződési pont a profil felületén az útvonalban. An optional additional placement to add to the profile before extruding it - An optional additional placement to add to the profile before extruding it + Egy választható kiegészítő elhelyezés a profil hozzáadásához, mielőtt kihúzná The rotation of the profile around its extrusion axis - The rotation of the profile around its extrusion axis + A profil felület forgása a kihúzási tengelye körül The type of edges to consider - The type of edges to consider + Élek megfontolandó típusa If true, geometry is fused, otherwise a compound - If true, geometry is fused, otherwise a compound + Ha igaz, geometriát összeolvaszt, egyébként egyesít The objects that host this window - The objects that host this window + A tárgyak, amelyek ebben az ablakban benne vannak The components of this window - The components of this window + Ennek az ablaknak az összetevői The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. + A nyílás mélysége melyet ez az ablak képez a hordozó felületen. Ha az értéke 0 akkor automatikusan számolja ki. An optional object that defines a volume to be subtracted from hosts of this window - An optional object that defines a volume to be subtracted from hosts of this window + A választható tárgy, mely meghatározza a területet amit az ablak a gazda területből kivesz The width of this window - The width of this window + Ennek az ablaknak a szélessége The height of this window - The height of this window + Ennek az ablaknak a magassága The normal direction of this window - The normal direction of this window + Ennek az ablaknak az aktuális iránya The preset number this window is based on - The preset number this window is based on + Az előre beállított szám ami ennek az ablaknak az alapja The frame size of this window - The frame size of this window + Ennek az ablaknak a keret mérete The offset size of this window - The offset size of this window + Ennek az ablaknak az eltolás mérete The area of this window - The area of this window + Ennek az ablaknak a területe The width of louvre elements - The width of louvre elements + Zsalu elemek szélessége The space between louvre elements - The space between louvre elements + Zsalu elemek közötti távolság Opens the subcomponents that have a hinge defined - Opens the subcomponents that have a hinge defined + Megnyitja az al-összetevőket, melyekhez egy zsanér van meghatározva The number of the wire that defines the hole. If 0, the value will be calculated automatically - The number of the wire that defines the hole. If 0, the value will be calculated automatically + A furatokat meghatározó dróthálók száma. Ha értéke 0, akkor automatikusan kiszámítja Shows plan opening symbols if available - Shows plan opening symbols if available + Kijelzi a terv nyitó szimbólumait, ha rendelkezésre állnak Show elevation opening symbols if available - Show elevation opening symbols if available + Kijelzi a magassági nyitó szintek szimbólumait, ha rendelkezésre állnak The number of the wire that defines the hole. A value of 0 means automatic - The number of the wire that defines the hole. A value of 0 means automatic + A furatokat meghatározó dróthálók száma. A 0 érték azt jelenti, hogy automatikus The axes this system is made of - The axes this system is made of + Tengelyek melyekre a rendszer épült The placement of this axis system - The placement of this axis system + Ennek a tengely rendszernek az elhelyezése The angle of the truss - The angle of the truss + A kereszttartó szöge The slant type of this truss - The slant type of this truss + Ennek a kereszttartónak a dőlés típusa The normal direction of this truss - The normal direction of this truss + Ennek a kereszttartónak az aktuális iránya The height of the truss at the start position - The height of the truss at the start position + A kereszttartó magassága a kezdő pozícióban The height of the truss at the end position - The height of the truss at the end position + A kereszttartó magassága a véghelyzetben An optional start offset for the top strut - An optional start offset for the top strut + Vàlasztható indítási eltolás a felső támasztáshoz An optional end offset for the top strut - An optional end offset for the top strut + Vàlasztható végeltolás a felső támasztáshoz The height of the main top and bottom elements of the truss - The height of the main top and bottom elements of the truss + A kereszttartó fő felső és alsó elemei magassága The width of the main top and bottom elements of the truss - The width of the main top and bottom elements of the truss + A kereszttartó fő felső és alsó elemei szélessége The type of the middle element of the truss - The type of the middle element of the truss + A kereszttartó középső elemének típusa The direction of the rods - The direction of the rods + A rudak iránya The diameter or side of the rods - The diameter or side of the rods + A rudak átmérője vagy oldala The number of rod sections - The number of rod sections + A rúdszelvények száma If the truss has a rod at its endpoint or not - If the truss has a rod at its endpoint or not + Ha a tartó végpontján van vagy nincs rúd How to draw the rods - How to draw the rods + Hogyan rajzolja a rudakat The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined + A lépcsők hosszai, ha alapvonal nem lett kijelölve The width of these stairs - The width of these stairs + Ezeknek a lépcsőknek a szélessége The total height of these stairs - The total height of these stairs + Ezeknek a lépcsőknek a teljes magassága The alignment of these stairs on their baseline, if applicable - The alignment of these stairs on their baseline, if applicable + A lépcsők alapvonalhoz való igazítása, ha lehetséges The width of a Landing (Second edge and after - First edge follows Width property) - The width of a Landing (Second edge and after - First edge follows Width property) + Pihenő szélessége (a második él és ami utána van - az első él a Szélesség tulajdonság alapján) The number of risers in these stairs - The number of risers in these stairs + Az emelkedés száma ezeken a lépcsőkön The depth of the treads of these stairs - The depth of the treads of these stairs + A futófelület mélységei ezeken a lépcsőkön The height of the risers of these stairs - The height of the risers of these stairs + Az emelkedés magassága ezeken a lépcsőkön The size of the nosing - The size of the nosing + Az orommagassága The thickness of the treads - The thickness of the treads + A futófelület vastagsága The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in + Blondel arány a kényelmes lépcsőt jelzi, aminek 62 és 64cm között kell lennie vagy 24.5 és 25.5 inch köztinek The thickness of the risers - The thickness of the risers + Az emelkedések vastagsága The depth of the landing of these stairs - The depth of the landing of these stairs + Pihenő mélysége ezeken a lépcsőkön The depth of the treads of these stairs - Enforced regardless of Length or edge's Length - The depth of the treads of these stairs - Enforced regardless of Length or edge's Length + Ezen lépcsők futófelületeinek mélysége - eröltetett a hossztól vagy élhosztól függetlenül The height of the risers of these stairs - Enforced regardless of Height or edge's Height - The height of the risers of these stairs - Enforced regardless of Height or edge's Height + Ezen lépcsők futófelületeinek magassága - erőltetett a magasságtól vagy élmagasságtól függetlenül The direction of flight after landing - The direction of flight after landing + Lépcső járat iránya a pihenő után The 'absolute' top level of a flight of stairs leads to - The 'absolute' top level of a flight of stairs leads to + A lépcsősor legteteje ide vezet The 'left outline' of stairs - The 'left outline' of stairs + A lépcső bal széle The 'left outline' of all segments of stairs - The 'left outline' of all segments of stairs + A lépcső valamennyi szegmensének bal széle The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + A lépcső valamennyi szegmensének jobb széle The type of landings of these stairs - The type of landings of these stairs + A lépcsők pihenőinek típusai The type of winders in these stairs - The type of winders in these stairs + A lépcsők elhúzásainak típusa The type of structure of these stairs - The type of structure of these stairs + A lépcsők szerkezetének típusa The thickness of the massive structure or of the stringers - The thickness of the massive structure or of the stringers + A masszív szerkezet vagy az aljzat tartógerenda vastagsága The width of the stringers - The width of the stringers + Tartógerendák szélessége The offset between the border of the stairs and the structure - The offset between the border of the stairs and the structure + Az eltolás a lépcső szegélye és a szerkezet között The overlap of the stringers above the bottom of the treads - The overlap of the stringers above the bottom of the treads + Az átfedés a futófelület aljától a tartógerendák tetejéig The thickness of the lower floor slab - The thickness of the lower floor slab + Az alsó szint födém vastagsága The thickness of the upper floor slab - The thickness of the upper floor slab + A felső emeleti födém vastagsága @@ -4770,53 +4770,53 @@ Building creation aborted. The type of connection between the end of the stairs and the upper floor slab - The type of connection between the end of the stairs and the upper floor slab + A lépcső vége és a felső emeleti födém közötti kapcsolat típusa A single section of the fence - A single section of the fence + A kerítés egyetlen szakasza A single fence post - A single fence post + Egyetlen kerítés oszlop The Path the fence should follow - The Path the fence should follow + Az útvonal melyet a kerítésnek követnie kell The number of sections the fence is built of - The number of sections the fence is built of + A kerítést felépítő szakaszok száma The number of posts used to build the fence - The number of posts used to build the fence + A kerítés építésére használt oszlopok száma When true, the fence will be colored like the original post and section. - When true, the fence will be colored like the original post and section. + Ha igaz, a kerítés olyan színű lesz, mint az eredeti oszlop és a szakasz. A description for this material - A description for this material + Egy leírás ehhez az anyaghoz A URL where to find information about this material - A URL where to find information about this material + Egy URL ahol megtalálom az információt erről az anyagról The transparency value of this material - The transparency value of this material + Az átlátszóság értéke ehhez az anyaghoz @@ -4826,1083 +4826,1083 @@ Building creation aborted. The color of this material when cut - The color of this material when cut + A színe ennek az anyagnak, ha vágott The list of layer names - The list of layer names + A réteg neveknek a listája The list of layer materials - The list of layer materials + Réteg anyagok listája The list of layer thicknesses - The list of layer thicknesses + A réteg vastagságok listája IFC data - IFC data + IFC Ipari alapítvány adatok IFC properties of this object - IFC properties of this object + A tárgy IFC Ipari alapítvány tulajdonságai Description of IFC attributes are not yet implemented - Description of IFC attributes are not yet implemented + Az IFC attribútumok leírása még nem került bevezetésre The length of this element - The length of this element + Ennek az elemnek a hossza The width of this element - The width of this element + Ennek az elemnek a szélessége The height of this element - The height of this element + Ennek az elemnek a magassága The size of the chamfer of this element - The size of the chamfer of this element + Ennek az elem letörésnek a mértéke The dent length of this element - The dent length of this element + Az elemen a mélyedés hossza The dent height of this element - The dent height of this element + Az elemen a mélyedés magassága The dents of this element - The dents of this element + Az elemen a mélyedések The chamfer length of this element - The chamfer length of this element + Az elemen a letörés hossza The base length of this element - The base length of this element + Az elemnek az alap hossza The groove depth of this element - The groove depth of this element + Az elemnek a horony hossza The groove height of this element - The groove height of this element + Az elemnek a horony magassága The spacing between the grooves of this element - The spacing between the grooves of this element + Az elemen a barázdák távolsága The number of grooves of this element - The number of grooves of this element + Az elemen a barázdák száma The dent width of this element - The dent width of this element + Az elemen a mélyedés szélessége The type of this slab - The type of this slab + Ennek a burkolólapnak a típusa The size of the base of this element - The size of the base of this element + Ennek az elem alapnak a nagysága The number of holes in this element - The number of holes in this element + Az elemen a furatok száma The major radius of the holes of this element - The major radius of the holes of this element + Az elemen a furatok fő sugara The minor radius of the holes of this element - The minor radius of the holes of this element + Az elemen a furatok alárendelt sugara The spacing between the holes of this element - The spacing between the holes of this element + Az elemnek a furatok közötti térközei The length of the down floor of this element - The length of the down floor of this element + Az elemnek az alsó szinti hossza The number of risers in this element - The number of risers in this element + Az elemen az emelkedések száma The riser height of this element - The riser height of this element + Az elemen lévő emelkedések magassága The tread depth of this element - The tread depth of this element + Ennek az elemnek a futófelület mélysége The thickness or extrusion depth of this element - The thickness or extrusion depth of this element + Ennek az elemnek a vastagsága vagy kihúzás mélysége The number of sheets to use - The number of sheets to use + A használandó burkolólapok száma The offset between this panel and its baseline - The offset between this panel and its baseline + A panel és az alapvonala közötti eltolás The length of waves for corrugated elements - The length of waves for corrugated elements + Hullámos elemek hullámainak hossza The height of waves for corrugated elements - The height of waves for corrugated elements + Hullámos elemek hullámainak magassága The horizontal offset of waves for corrugated elements - The horizontal offset of waves for corrugated elements + Hullámos elemek hullámainak vízszintes eltolása The direction of waves for corrugated elements - The direction of waves for corrugated elements + Hullámos elemek hullámainak iránya The type of waves for corrugated elements - The type of waves for corrugated elements + Hullámos elemek hullámainak típusa If the wave also affects the bottom side or not - If the wave also affects the bottom side or not + Ha a hullám érinti vagy sem az alsó oldalt The area of this panel - The area of this panel + Ennek a panelnek a területe The linked object - The linked object + A kapcsolt tárgy The line width of the rendered objects - The line width of the rendered objects + A megjelenített tárgyak vonalvastagsága The color of the panel outline - The color of the panel outline + A panel körvonalának színe The size of the tag text - The size of the tag text + Címkeszöveg mérete The color of the tag text - The color of the tag text + Címkeszöveg színe The X offset of the tag text - The X offset of the tag text + Címkeszöveg X eltolása The Y offset of the tag text - The Y offset of the tag text + Címkeszöveg Y eltolása The font of the tag text - The font of the tag text + A címkeszöveg betűtípusa The text to display. Can be %tag%, %label% or %description% to display the panel tag or label - The text to display. Can be %tag%, %label% or %description% to display the panel tag or label + A szöveg megjelenítéséhez. Lehet %tag%, %label% vagy %description% a panel címke vagy felirat megjelenítéséhez The position of the tag text. Keep (0,0,0) for center position - The position of the tag text. Keep (0,0,0) for center position + A címke szöveg helyzete. Hagyja (0,0,0) értéken a középre pozicionáláshoz The rotation of the tag text - The rotation of the tag text + A címkeszöveg elfordulása If True, the object is rendered as a face, if possible. - If True, the object is rendered as a face, if possible. + Ha igaz, a tárgyat felületként képzi, ha lehetséges. The allowed angles this object can be rotated to when placed on sheets - The allowed angles this object can be rotated to when placed on sheets + Ennek a tárgynak a megengedett szögei forgathatóak, ha lapokra helyezett An offset value to move the cut plane from the center point - An offset value to move the cut plane from the center point + Egy eltolás érték a vágott sík elmozdulásához a középponttól A margin inside the boundary - A margin inside the boundary + Szegélyen belüli határ Turns the display of the margin on/off - Turns the display of the margin on/off + Szegélyek kijelzésének be/ki kapcsolása The linked Panel cuts - The linked Panel cuts + A csatolt panel kivágások The tag text to display - The tag text to display + Megjelenítendő címkeszöveg The font file - The font file + A betűkészlet fájl The width of the sheet - The width of the sheet + Burkolólapok szélessége The height of the sheet - The height of the sheet + Burkolólapok magassága The fill ratio of this sheet - The fill ratio of this sheet + Ennek a burkolólapnak a kitöltési aránya Specifies an angle for the wood grain (Clockwise, 0 is North) - Specifies an angle for the wood grain (Clockwise, 0 is North) + Itt adhatja meg a fa illesztés szögét (óramutató irányba, 0 az Észak) Specifies the scale applied to each panel view. - Specifies the scale applied to each panel view. + Itt adhatja meg az összes panel nézetre alkalmazott léptéket. A list of possible rotations for the nester - A list of possible rotations for the nester + Egy lista a fészkek lehetséges forgatásáról Turns the display of the wood grain texture on/off - Turns the display of the wood grain texture on/off + Fa illesztés textúra kijelzésének be/ki kapcsolása An optional host object for this curtain wall - An optional host object for this curtain wall + Opcionális gazdatárgy ehhez a függönyfalhoz The height of the curtain wall, if based on an edge - The height of the curtain wall, if based on an edge + A függönyfal magassága, ha élen fekszik The number of vertical mullions - The number of vertical mullions + Függőleges osztók száma If the profile of the vertical mullions get aligned with the surface or not - If the profile of the vertical mullions get aligned with the surface or not + Ha a függőleges osztók szelvényei a felülethez igazodnak, vagy nem The number of vertical sections of this curtain wall - The number of vertical sections of this curtain wall + A függönyfal függőleges szakaszainak száma The height of the vertical mullions profile, if no profile is used - The height of the vertical mullions profile, if no profile is used + A függőleges osztók szelvényeinek magassága, ha nem használ szelvényt The width of the vertical mullions profile, if no profile is used - The width of the vertical mullions profile, if no profile is used + A függőleges osztók hossz-szelvényszélessége, ha nincs hossz-szelvény A profile for vertical mullions (disables vertical mullion size) - A profile for vertical mullions (disables vertical mullion size) + Szelvény függőleges osztók (letiltja a függőleges osztó méretét) The number of horizontal mullions - The number of horizontal mullions + A vízszintes osztók száma If the profile of the horizontal mullions gets aligned with the surface or not - If the profile of the horizontal mullions gets aligned with the surface or not + Ha a vízszintes osztók profilja a felülethez igazodik, vagy nem The number of horizontal sections of this curtain wall - The number of horizontal sections of this curtain wall + Ennek a függöny fal vízszintes szakaszainak a száma The height of the horizontal mullions profile, if no profile is used - The height of the horizontal mullions profile, if no profile is used + A vízszintes osztók szelvényének magassága, ha nem használ szelvényt The width of the horizontal mullions profile, if no profile is used - The width of the horizontal mullions profile, if no profile is used + A vízszintes osztók szelvény szélessége, ha nincs szelvény A profile for horizontal mullions (disables horizontal mullion size) - A profile for horizontal mullions (disables horizontal mullion size) + A profil vízszintes osztói (letiltja a vízszintes osztók méretét) The number of diagonal mullions - The number of diagonal mullions + A függőleges osztók száma The size of the diagonal mullions, if any, if no profile is used - The size of the diagonal mullions, if any, if no profile is used + Az átlós osztók mérete, ha vannak ilyenek, ha nem akkor a szelvényt használja A profile for diagonal mullions, if any (disables horizontal mullion size) - A profile for diagonal mullions, if any (disables horizontal mullion size) + A szelvény átlós osztói, ha van ilyen (letiltja a vízszintes osztó méretet) The number of panels - The number of panels + A panelek száma The thickness of the panels - The thickness of the panels + A panelek vastagsága Swaps horizontal and vertical lines - Swaps horizontal and vertical lines + Vízszintes és függőleges vonalak felcserélése Perform subtractions between components so none overlap - Perform subtractions between components so none overlap + Kivonások végrehajtása az összetevők között, hogy ne fedjék egymást Centers the profile over the edges or not - Centers the profile over the edges or not + Középre igazítja, vagy nem, a hossz-szelvényt a szélek fölé The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + A tárgy által a függőleges/vízszintes irányok kikövetkeztetésére használandó függőleges irányhivatkozás. Tartsa közel a függönyfal tényleges függőleges irányához The diameter of this pipe, if not based on a profile - The diameter of this pipe, if not based on a profile + Ennek a csőnek az átmérője, ha nem felület profilon áll The length of this pipe, if not based on an edge - The length of this pipe, if not based on an edge + Ennek a csőnek a hossza, ha nem élen áll An optional closed profile to base this pipe on - An optional closed profile to base this pipe on + Egy választható zárt felület szelvény, mely a cső alapjául szolgál Offset from the start point - Offset from the start point + Eltolás a kezdőponttól Offset from the end point - Offset from the end point + Eltolás a végponttól The wall thickness of this pipe, if not based on a profile - The wall thickness of this pipe, if not based on a profile + Ennek a csőnek a falvastagsága, ha nem a szelvényen alapul The curvature radius of this connector - The curvature radius of this connector + Ennek a csatlakozónak a görbületi sugara The pipes linked by this connector - The pipes linked by this connector + Ehhez a csatlakozóhoz csatlakozó csövek The type of this connector - The type of this connector + Ennek a csatlakozónak a típusa The description column - The description column + A leírás oszlop The values column - The values column + Az érték(ek) oszlop The units column - The units column + Az egység(ek) oszlop The objects column - The objects column + A tárgy(ak) oszlop The filter column - The filter column + A szűrő(k) oszlop If True, a spreadsheet containing the results is recreated when needed - If True, a spreadsheet containing the results is recreated when needed + Ha igaz, szükség esetén újra létrejön az eredményeket tartalmazó táblázat The spreadsheet to print the results to - The spreadsheet to print the results to + A táblázat az eredmények nyomtatásához If True, additional lines with each individual object are added to the results - If True, additional lines with each individual object are added to the results + Ha Igaz, az egyes tárgyakkal rendelkező további sorok hozzáadódnak az eredményekhez The placement of this object - The placement of this object + Ennek az tárgynak az elhelyezése The intervals between axes - The intervals between axes + Tengelyek közötti meghatározott közök The angles of each axis - The angles of each axis + Minden egyes tengely szöge The label of each axis - The label of each axis + Minden egyes tengely címkéje An optional custom bubble number - An optional custom bubble number + Egy kötelező egyéni buborék szám The length of the axes - The length of the axes + A tengelyek hossza If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Ha nem nulla, akkor a tengelyek nem egy teljes vonalként, hanem az adott hossz két vonalaként ábrázoltak The size of the axis bubbles - The size of the axis bubbles + A tengely buborékok mérete The numbering style - The numbering style + Számozási stíus The type of line to draw this axis - The type of line to draw this axis + Ennek a tengelynek a rajzolásához használt egyenes típusa Where to add bubbles to this axis: Start, end, both or none - Where to add bubbles to this axis: Start, end, both or none + Hová tegye a buborékot a tengelyhez: kezdete, vége, mindkettő vagy egyiksem The line width to draw this axis - The line width to draw this axis + Ennek a tengelynek a rajzolásához használt egyenes szélessége The color of this axis - The color of this axis + Ennek a tengelynek a színe The number of the first axis - The number of the first axis + Az első tengely száma The font to use for texts - The font to use for texts + A szöveghez használandó betűtípus The font size - The font size + A betűméret If true, show the labels - If true, show the labels + Ha igaz, mutatja a feliratokat A transformation to apply to each label - A transformation to apply to each label + Egy átalakítás mely az összes címkére vonatkozik The base object this component is built upon - The base object this component is built upon + Összetevő szülő tárgya ebből épült The object this component is cloning - The object this component is cloning + Ennek az összetevőnek a tárgyát klónozza An optional standard (OmniClass, etc...) code for this component - An optional standard (OmniClass, etc...) code for this component + Egy választható szabvány (OmniClass, stb.) kód ehhez az összetevőhöz A material for this object - A material for this object + Egy anyag ehhez a tárgyhoz Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Megadja, hogy a tárgy áthelyezése helyett áthelyezi-e annak alapját Specifies if this object must move together when its host is moved - Specifies if this object must move together when its host is moved + Itt adható meg, ha ennek a tárgynak együtt kell mozognia a gazda áthelyezésével The area of all vertical faces of this object - The area of all vertical faces of this object + Ennek a tárgynak az összes függőleges felületének területe The perimeter length of the horizontal area - The perimeter length of the horizontal area + A vízszintes terület kerületének hossza An optional higher-resolution mesh or shape for this object - An optional higher-resolution mesh or shape for this object + Egy választható magasabb felbontású háló vagy alakzat ehhez az tárgyhoz An optional axis or axis system on which this object should be duplicated - An optional axis or axis system on which this object should be duplicated + Egy választható tengely vagy tengely rendszer, amelyre ezt a tárgyat meg kell kettőzni - + Use the material color as this object's shape color, if available - Use the material color as this object's shape color, if available + Az anyagszín használata a tárgy alakzatszíneként, ha rendelkezésre áll The diameter of the bar - The diameter of the bar + Sáv átmérője The distance between the border of the beam and the first bar (concrete cover). - The distance between the border of the beam and the first bar (concrete cover). + A gerenda szélének és az első gerenda (beton fedlap) közti távolság. The distance between the border of the beam and the last bar (concrete cover). - The distance between the border of the beam and the last bar (concrete cover). + A gerenda határának és az utolsó sáv (beton fedlap) közötti távolság. The amount of bars - The amount of bars + Sávok mennyisége The spacing between the bars - The spacing between the bars + A sávok közötti térköz The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - The total distance to span the rebars over. Keep 0 to automatically use the host shape size. + Az betonacél feletti kiforgatáshoz a teljes távolság. Hagyja meg a 0 értéket az automatikushoz a kiszolgáló alakzat méretének használatához. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - The direction to use to spread the bars. Keep (0,0,0) for automatic direction. + Irány a sávok szórásához. Tartsa (0,0,0) az automatikus irányhoz. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. - The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. + Az alap felület profil szögéhez használ kívánt lekerekítés. Ezt az értéket megszorozza a a sáv átmérőjével. List of placement of all the bars - List of placement of all the bars + Az összes sáv elhelyezésének listája The structure object that hosts this rebar - The structure object that hosts this rebar + Ennek a betonacélnak a hordozó szerkezeti tárgya The custom spacing of rebar - The custom spacing of rebar + Betonacél egyedi térközzel Length of a single rebar - Length of a single rebar + Egyetlen betonacél hossza Total length of all rebars - Total length of all rebars + Összes betonacél teljes hossza The rebar mark - The rebar mark + A betonacél jel Shape of rebar - Shape of rebar + Betonacél alakja The objects that must be considered by this section plane. Empty means the whole document. - The objects that must be considered by this section plane. Empty means the whole document. + Tárgy a metszés nézethez. Üresen hagyva az egész dokumentumot jelenti. If false, non-solids will be cut too, with possible wrong results. - If false, non-solids will be cut too, with possible wrong results. + Ha hamis, nem szilárd testeket is elvág, lehetséges rossz eredménnyel. If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. + Ha az érték Igaz, a rendszer az eredményül kapott nézeteket a metszősík területére levágja. If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. + Az elemhez tartozó anyag színének használata metszeti kitöltésként. Geometry further than this value will be cut off. Keep zero for unlimited. - Geometry further than this value will be cut off. Keep zero for unlimited. + Az értéknél távolabbi geometria megszakad. Tartsd nullán, akkor korlátlan. The display length of this section plane - The display length of this section plane + A metszősík megjelenítési hossza The display height of this section plane - The display height of this section plane + A metszősík megjelenítési magassága The size of the arrows of this section plane - The size of the arrows of this section plane + Metszősík nyilainak a nagysága The transparency of this object - The transparency of this object + Ennek a tárgynak az átláthatósága Show the cut in the 3D view - Show the cut in the 3D view + A vágás 3D-s nézetének megjelenítése The color of this object - The color of this object + Ennek a tárgynak a színe The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - The distance between the cut plane and the actual view cut (keep this a very small value but not zero) + A tényleges vágás és a kivágási sík közötti távolság (hagyja nagyon kis méretűre, de ne legyen nulla) Show the label in the 3D view - Show the label in the 3D view + A címke megjelenítése 3D nézetben The name of the font - The name of the font + Betűtípus neve The size of the text font - The size of the text font + A betűtípus mérete The rendering mode to use - The rendering mode to use + A használandó igazító mód If cut geometry is shown or not - If cut geometry is shown or not + Ha a levágott geometria megjelenik vagy sem If cut geometry is filled or not - If cut geometry is filled or not + Ha a levágott geometria kitöltött vagy sem The size of the texts inside this object - The size of the texts inside this object + A szöveg vastagsága ebben az tárgyban If checked, source objects are displayed regardless of being visible in the 3D model - If checked, source objects are displayed regardless of being visible in the 3D model + Ha be van jelölve, a forrástárgyak megjelennek függetlenül attól, hogy látható legyen, a 3D-s modellben The line color of the projected objects - The line color of the projected objects + A vetített tárgyak vonal színe The color of the cut faces (if turned on) - The color of the cut faces (if turned on) + Vágott felületek színe (ha be van kapcsolva) The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + A tárgyak, amelyek a térben lévő tárgyak határait alkotják The computed floor area of this space - The computed floor area of this space + Ennek a területnek a számított szint alapterülete The finishing of the floor of this space - The finishing of the floor of this space + Ennek a területnek az aljzat burkolata The finishing of the walls of this space - The finishing of the walls of this space + Ennek a területnek a fal burkolata The finishing of the ceiling of this space - The finishing of the ceiling of this space + Ennek a területnek a mennyezet burkolata Objects that are included inside this space, such as furniture - Objects that are included inside this space, such as furniture + Tárgyak, melyek szerepelnek ebben a térben, mint például a bútorok The type of this space - The type of this space + Ennek a térnek a típusa The thickness of the floor finish - The thickness of the floor finish + Padlóburkolat vastagsága The number of people who typically occupy this space - The number of people who typically occupy this space + Az emberek száma, akik általában elfoglalják ezt a teret The electric power needed to light this space in Watts - The electric power needed to light this space in Watts + A villamos energia Wattban amely szükséges ennek a helynek a megvilágításához The electric power needed by the equipment of this space in Watts - The electric power needed by the equipment of this space in Watts + Az eszközhöz ebben a helyiségben szükséges elektromos áram Wattban If True, Equipment Power will be automatically filled by the equipment included in this space - If True, Equipment Power will be automatically filled by the equipment included in this space + Ha igaz, az eszköz energiát a területen szereplő berendezések alapján automatikusan számítja The type of air conditioning of this space - The type of air conditioning of this space + A helynek a légkondicionáló típusa Specifies if this space is internal or external - Specifies if this space is internal or external + Itt adható meg, ha ez a terület belső vagy külső The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + A szöveg megjelenítéséhez. $area, $label, $tag, $floor, $walls, $ceiling segítségével illessze be a megfelelő adatokat The color of the area text - The color of the area text + A terület szöveg színe The size of the first line of text - The size of the first line of text + A szöveg első sorának a mérete The space between the lines of text - The space between the lines of text + A szövegsorok közötti térköz The position of the text. Leave (0,0,0) for automatic position - The position of the text. Leave (0,0,0) for automatic position + A szöveg helyzete. Hagyja (0,0,0) értéken az automatikus pozicionáláshoz The justification of the text - The justification of the text + A szöveges indoklása The number of decimals to use for calculated texts - The number of decimals to use for calculated texts + A számításhoz használt szövegek tizedesjegyek száma Show the unit suffix - Show the unit suffix + Mértékegység utótag megjelenítése The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + Ennek a falnak a hossza. Nem használható, ha ennek a falnak alapjául más aláhúzott tárgy szolgál The width of this wall. Not used if this wall is based on a face - The width of this wall. Not used if this wall is based on a face + Ennek a falnak a szélessége. Nem használható, ha ennek a falnak alapjául más felület szolgál This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + Ez felülírja a Width attribútumot, hogy a fal minden egyes szakaszának szélességét beállítsa. Figyelmen kívül hagyva, ha az Alap objektum szélességi információt ad meg a getWidths() metódussal. (Az első érték felülbírálja a "Width" attribútumot a fal első szakaszához; ha az érték nulla, akkor az "OverrideWidth" első értéke következik) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + Ez felülbírálja az Align attribútumot, hogy a fal minden egyes szegmensének Igazítását beállítsa. Figyelmen kívül hagyva, ha az alapobjektum Aligns információt ad meg a getAligns() metódussal. (Az első érték felülbírálja az "Align" attribútumot a fal első szakaszához; ha az érték nem "Balra, Jobbra, Középre", akkor a "OverrideAlign" első értéke a következő) The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + Ennek a falnak a magassága. Automatikushoz legyen 0. Nem használt, amennyiben ez a fal szilárd testen áll The area of this wall as a simple Height * Length calculation - The area of this wall as a simple Height * Length calculation + A fal felülete, egyszerűen a Magasság*Hosszúság képlet szerint The alignment of this wall on its base object, if applicable - The alignment of this wall on its base object, if applicable + Ennek a falnak az alap tárgyhoz igazítása, ha lehetséges The face number of the base object used to build this wall - The face number of the base object used to build this wall + Ennek a falnak a felépítéséhez használt alap tárgyak száma The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + Ennek a falnak és a kiindulási pontja (csak a bal és jobb nyomvonalak) közötti eltolás Enable this to make the wall generate blocks - Enable this to make the wall generate blocks + Engedélyezze ezt, hogy a fal hozza létre a blokkokat The length of each block - The length of each block + Minden egyes blokk hossza The height of each block - The height of each block + Minden egyes blokk magassága The horizontal offset of the first line of blocks - The horizontal offset of the first line of blocks + Az első sor blokkok vízszintes eltolása The horizontal offset of the second line of blocks - The horizontal offset of the second line of blocks + A második sor blokkjainak vízszintes eltolása The size of the joints between each block - The size of the joints between each block + A blokkok közti fugák mérete The number of entire blocks - The number of entire blocks + Az összes blokk száma The number of broken blocks - The number of broken blocks + A hibás blokkok száma @@ -5911,7 +5911,7 @@ Building creation aborted. Structure tools - Structure tools + Szerkezeti eszközök @@ -5924,7 +5924,7 @@ Building creation aborted. Creates an equipment object from a selected object (Part or Mesh) - Creates an equipment object from a selected object (Part or Mesh) + Egy Felszerelési tárgyat hoz létre egy kijelölt tárgyból (Alkatrész vagy Háló) @@ -5932,12 +5932,12 @@ Building creation aborted. 3 views from mesh - 3 views from mesh + 3 nézet a hálóból Creates 3 views (top, front, side) from a mesh-based object - Creates 3 views (top, front, side) from a mesh-based object + 3 nézet (felső, első, oldalsó) létrehozása a háló-kiindulópontú tárgyból @@ -5950,7 +5950,7 @@ Building creation aborted. Creates a BuildingPart object including selected objects - Creates a BuildingPart object including selected objects + Épületrész létrehozása a kiválasztott tárgyakból @@ -5958,7 +5958,7 @@ Building creation aborted. Writing camera position - Writing camera position + Kamera helyzet írása @@ -5981,47 +5981,47 @@ Building creation aborted. Structure tools - Structure tools + Szerkezeti eszközök Axis tools - Axis tools + Tengely eszközök Panel tools - Panel tools + Panel eszközök Material tools - Material tools + Anyag eszközök Pipe tools - Pipe tools + Cső eszközök Rebar tools - Rebar tools + Betonacél eszközök Arch tools - Arch tools + Építészeti eszközök Draft creation tools - Draft creation tools + Tervrajzkészítő eszközök Draft annotation tools - Draft annotation tools + Tervrajz megjegyzési eszközök @@ -6037,7 +6037,7 @@ Building creation aborted. &Arch - &Arch + Építészet @@ -6051,12 +6051,12 @@ Building creation aborted. &Draft - &Draft + Tervrajz Creation - Creation + Létrehozás @@ -6066,7 +6066,7 @@ Building creation aborted. Modification - Modification + Módosítás @@ -6074,12 +6074,12 @@ Building creation aborted. Rebar tools - Rebar tools + Betonacél eszközök Create various types of rebars, including U-shaped, L-shaped, and stirrup - Create various types of rebars, including U-shaped, L-shaped, and stirrup + Hozzon létre különböző típusú betonacélokat, beleértve az U-alakút, L-alakút és kengyelt @@ -6092,7 +6092,7 @@ Building creation aborted. Creates a profile object - Creates a profile object + Létrehoz egy szelvény tárgyat @@ -6105,7 +6105,7 @@ Building creation aborted. Creates a site object including selected objects. - Creates a site object including selected objects. + Létrehoz egy oldal tátgyat, beleértve a kijelölt tárgyakat. @@ -6118,7 +6118,7 @@ Building creation aborted. Creates a roof object from the selected wire. - Creates a roof object from the selected wire. + Egy tető tárgyat hoz létre a kijelölt drótvázból. @@ -6126,12 +6126,12 @@ Building creation aborted. Cut with line - Cut with line + Vágás vonallal Cut an object with a line - Cut an object with a line + Egy vonallal elvágja a tárgyat @@ -6139,12 +6139,12 @@ Building creation aborted. Cut with plane - Cut with plane + Síkkal vágja Cut an object with a plane - Cut an object with a plane + Egy síkkal elvágja a tárgyat @@ -6152,12 +6152,12 @@ Building creation aborted. External reference - External reference + Külső hivatkozás Creates an external reference object - Creates an external reference object + Egy külső referencia tárgyat hoz létre @@ -6170,7 +6170,7 @@ Building creation aborted. Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. - Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. + Létrehoz egy keret tárgyat egy síkbeli 2D tárgyból (a kihúzás útvonala(k)) és egy felület szelvényből. Győződjön meg róla, tárgyak kijelölése ebben a sorrendben történt. @@ -6183,7 +6183,7 @@ Building creation aborted. Creates a window object from a selected object (wire, rectangle or sketch) - Creates a window object from a selected object (wire, rectangle or sketch) + Ablak tárgyat hoz létre a kijelölt tárgyból (vonalas, téglalap vagy vázlat) @@ -6196,7 +6196,7 @@ Building creation aborted. Creates an axis system from a set of axes - Creates an axis system from a set of axes + Létrehoz egy tengely rendszert a meghatározott tengelyekről @@ -6209,7 +6209,7 @@ Building creation aborted. Creates a truss object from selected line or from scratch - Creates a truss object from selected line or from scratch + Kereszttartó tárgy létrehozása a kijelölt vonalból vagy a vonalrajzból @@ -6222,7 +6222,7 @@ Building creation aborted. Creates a project entity aggregating the selected sites. - Creates a project entity aggregating the selected sites. + A kijelölt helyeket összesítő szerkezetet hoz létre. @@ -6238,7 +6238,7 @@ Building creation aborted. Creates a stairs object - Creates a stairs object + Lépcső tárgyat hoz létre @@ -6248,7 +6248,7 @@ Building creation aborted. Creates a space object from selected boundary objects - Creates a space object from selected boundary objects + Létrehoz egy terület tàrgyat a határoló tárgyakból @@ -6261,7 +6261,7 @@ Building creation aborted. Creates a fence object from a selected section, post and path - Creates a fence object from a selected section, post and path + Kerítés tárgy létrehozása a kijelölt szakaszból, oszlopból és útvonalból @@ -6274,7 +6274,7 @@ Building creation aborted. Creates or edits the material definition of a selected object. - Creates or edits the material definition of a selected object. + A kiválasztott tárgy anyag meghatározását hozza létre vagy szerkeszti. @@ -6282,12 +6282,12 @@ Building creation aborted. Multi-Material - Multi-Material + Több részből álló anyag Creates or edits multi-materials - Creates or edits multi-materials + Létrehozza vagy szerkeszti a több részből álló anyagokat @@ -6296,7 +6296,7 @@ Building creation aborted. Material tools - Material tools + Anyag eszközök @@ -6309,67 +6309,67 @@ Building creation aborted. Creates a customizable grid object - Creates a customizable grid object + Létrehoz egy testre szabható rács tárgyat The number of rows - The number of rows + A sorok száma The number of columns - The number of columns + Az oszlopok száma The sizes for rows - The sizes for rows + A sorok méretei The sizes of columns - The sizes of columns + Oszlopkok méretei The span ranges of cells that are merged together - The span ranges of cells that are merged together + Az összefőzött cellák kitöltési határai The type of 3D points produced by this grid object - The type of 3D points produced by this grid object + A rács tárgy által létrehozott 3D pontok típusa The total width of this grid - The total width of this grid + Ennek a rácsnak a teljes szélessége The total height of this grid - The total height of this grid + Ennek a rácsnak a teljes magassága Creates automatic column divisions (set to 0 to disable) - Creates automatic column divisions (set to 0 to disable) + Automatikus oszlop kiosztást hoz létre (állítsa 0-ra a kikapcsoláshoz) Creates automatic row divisions (set to 0 to disable) - Creates automatic row divisions (set to 0 to disable) + Automatikus sor kiosztást hoz létre (állítsa 0-ra a kikapcsoláshoz) When in edge midpoint mode, if this grid must reorient its children along edge normals or not - When in edge midpoint mode, if this grid must reorient its children along edge normals or not + Középponti élek módban, hogy a hálónak át kell-e igazítania alárendeltjeit az egymásra merőleges élek mentén The indices of faces to hide - The indices of faces to hide + A felületek jelöléseinek elrejtése @@ -6377,12 +6377,12 @@ Building creation aborted. Panel - Panel + Panel Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) - Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Panel tárgyat hoz létre a vázrajzból vagy egy kijelölt tárgyból (vázlat, drót, felület vagy szilárd test) @@ -6395,7 +6395,7 @@ Building creation aborted. Creates 2D views of selected panels - Creates 2D views of selected panels + Létrehoz 2D nézeteket a kijelölt panelekből @@ -6408,7 +6408,7 @@ Building creation aborted. Creates a 2D sheet which can contain panel cuts - Creates a 2D sheet which can contain panel cuts + Létrehoz egy 2D-s lapot, amely tartalmazhat panel vágásokat @@ -6416,12 +6416,12 @@ Building creation aborted. Nest - Nest + Háló Nests a series of selected shapes in a container - Nests a series of selected shapes in a container + Kiválasztott alakzatok háló sorozatát konténerezi @@ -6430,7 +6430,7 @@ Building creation aborted. Panel tools - Panel tools + Panel eszközök @@ -6443,7 +6443,7 @@ Building creation aborted. Creates a curtain wall object from selected line or from scratch - Creates a curtain wall object from selected line or from scratch + Függönyfal tárgy létrehozás a kijelölt vonalból vagy vázlatból @@ -6456,7 +6456,7 @@ Building creation aborted. Creates a pipe object from a given Wire or Line - Creates a pipe object from a given Wire or Line + Cső tárgyat hoz létre egy adott dróthálóból vagy egyenesből @@ -6464,12 +6464,12 @@ Building creation aborted. Connector - Connector + Csatlakozó Creates a connector between 2 or 3 selected pipes - Creates a connector between 2 or 3 selected pipes + Létrehoz egy csatlakozást, 2 vagy 3 kijelölt csövek között @@ -6478,7 +6478,7 @@ Building creation aborted. Pipe tools - Pipe tools + Cső eszközök @@ -6491,7 +6491,7 @@ Building creation aborted. Creates a schedule to collect data from the model - Creates a schedule to collect data from the model + Létrehoz egy ütemezést adatgyűjtéshez a modellből @@ -6504,7 +6504,7 @@ Building creation aborted. Creates a Building Part object that represents a level, including selected objects - Creates a Building Part object that represents a level, including selected objects + Létrehoz egy szinttel jelölt épületrész tárgyat, beleértve a kijelölt tárgyakat is @@ -6517,7 +6517,7 @@ Building creation aborted. Creates a set of axes - Creates a set of axes + Létrehoz egy tengely csoportot @@ -6526,7 +6526,7 @@ Building creation aborted. Axis tools - Axis tools + Tengely eszközök @@ -6534,12 +6534,12 @@ Building creation aborted. Custom Rebar - Custom Rebar + Egyedi betonacél Creates a Reinforcement bar from the selected face of solid object and/or a sketch - Creates a Reinforcement bar from the selected face of solid object and/or a sketch + Megerősítő sáv létrehozása a kijelölt szilárdtest tárgyból és/vagy vázlatból @@ -6547,12 +6547,12 @@ Building creation aborted. Section Plane - Section Plane + Rész sík Creates a section plane object, including the selected objects - Creates a section plane object, including the selected objects + Létrehoz egy szakasz sík tárgyat, beleértve a kijelölt tárgyakat @@ -6565,7 +6565,7 @@ Building creation aborted. Creates a building object including selected objects. - Creates a building object including selected objects. + Létrehoz egy épület tárgyat, beleértve a kijelölt tárgyakat. @@ -6573,12 +6573,12 @@ Building creation aborted. Wall - Wall + Fal Creates a wall object from scratch or from a selected object (wire, face or solid) - Creates a wall object from scratch or from a selected object (wire, face or solid) + Létrehoz egy falat tárgyat vázlatból vagy egy kijelölt tárgyból (vonal, felület vagy test) @@ -6586,12 +6586,12 @@ Building creation aborted. Merge Walls - Merge Walls + Falak egyesítése Merges the selected walls, if possible - Merges the selected walls, if possible + Egyesíti a kijelölt falakat, ha lehetséges @@ -6599,12 +6599,12 @@ Building creation aborted. Add component - Add component + Összetevő hozzáadása Adds the selected components to the active object - Adds the selected components to the active object + A kijelölt összetevőket hozzáadja az aktív tárgyhoz @@ -6612,12 +6612,12 @@ Building creation aborted. Remove component - Remove component + Összetevő törlése Remove the selected components from their parents, or create a hole in a component - Remove the selected components from their parents, or create a hole in a component + A kijelölt alkatrészek eltávolítása a szülőktől, vagy egy furat létrehozása alkatrészen @@ -6630,7 +6630,7 @@ Building creation aborted. Splits selected meshes into independent components - Splits selected meshes into independent components + A kiválasztott hálót független összetevőkre osztja @@ -6643,7 +6643,7 @@ Building creation aborted. Turns selected meshes into Part Shape objects - Turns selected meshes into Part Shape objects + A kiválasztott hálókat alakzat tárgyakká alakítja @@ -6651,12 +6651,12 @@ Building creation aborted. Select non-manifold meshes - Select non-manifold meshes + Válassza ki a nem-sokrétű hálózatot Selects all non-manifold meshes from the document or from the selected groups - Selects all non-manifold meshes from the document or from the selected groups + Kiválasztja az összes nem-sokrétű hálózatot a dokumentumból vagy a kijelölt csoportokból @@ -6664,12 +6664,12 @@ Building creation aborted. Remove Shape from Arch - Remove Shape from Arch + Alakzat eltávolítása az Építészet-ből Removes cubic shapes from Arch components - Removes cubic shapes from Arch components + Eltávolítja a harmadfokú alakzatokat az Építészet alkatrészekből @@ -6677,12 +6677,12 @@ Building creation aborted. Close holes - Close holes + Furatok bezárása Closes holes in open shapes, turning them solids - Closes holes in open shapes, turning them solids + Bezárja a nyitott alakzatokat, szilárd testé változtatja azokat @@ -6690,12 +6690,12 @@ Building creation aborted. Check - Check + Ellenőrzés Checks the selected objects for problems - Checks the selected objects for problems + Ellenőrzi a kijelölt tárgyak problémáit @@ -6708,7 +6708,7 @@ Building creation aborted. Starts survey - Starts survey + Felmérés indítása @@ -6716,12 +6716,12 @@ Building creation aborted. Toggle IFC Brep flag - Toggle IFC Brep flag + IFC Brep jelölő zászló Force an object to be exported as Brep or not - Force an object to be exported as Brep or not + Erőltessen, vagy ne, egy tárgyat Brep exportálásra @@ -6734,7 +6734,7 @@ Building creation aborted. Creates an undefined architectural component - Creates an undefined architectural component + Létrehoz egy meghatározatlan építészeti összetevőt @@ -6742,12 +6742,12 @@ Building creation aborted. Clone component - Clone component + Összetevő klónozása Clones an object as an undefined architectural component - Clones an object as an undefined architectural component + Klónoz egy tárgyat egy nem definiált építészeti összetevőként @@ -6755,12 +6755,12 @@ Building creation aborted. Create IFC spreadsheet... - Create IFC spreadsheet... + IFC táblázat létrehozása... Creates a spreadsheet to store IFC properties of an object. - Creates a spreadsheet to store IFC properties of an object. + Készít egy táblázatot egy tárgy IFC tulajdonságainak tárolására. @@ -6773,7 +6773,7 @@ Building creation aborted. Shows or hides the subcomponents of this object - Shows or hides the subcomponents of this object + Megjeleníti vagy elrejti ennek az tárgynak az al-összetevőit diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index 93c1c275b7..dc2c8ad5d1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -2131,7 +2131,7 @@ Creazione del Sito interrotta. - + Please select a base object Selezionare un oggetto base @@ -2412,7 +2412,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Remove @@ -2422,7 +2422,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Add Aggiungi @@ -2438,7 +2438,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Edit Modifica @@ -2461,7 +2461,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Components Componenti @@ -2479,7 +2479,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Type Tipo @@ -2558,7 +2558,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Axes Assi @@ -3071,7 +3071,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Value Valore @@ -3161,17 +3161,17 @@ Creazione del Piano interrotta. Importato con successo - + Error computing the shape of this object Errore nel calcolo della forma di questo oggetto - + has no solid non ha un solido - + has an invalid shape ha una forma non valida @@ -3182,103 +3182,103 @@ Creazione del Piano interrotta. - + has a null shape ha una forma nulla - + Toggle subcomponents Attiva/disattiva sottocomponenti - + Closing Sketch edit Chiudi modifica Sketch - + Component Componente - + Components of this object Componenti di questo oggetto - + Base component Componente base - + Additions Aggiunte - + Subtractions Sottrazioni - + Objects Oggetti - + Fixtures Infissi - + Group Gruppo - + Hosts Ospiti - + Edit IFC properties Modifica proprietà IFC - + Edit standard code Modifica codice standard - + Property Proprietà - + Add property... Aggiungi proprietà... - + Add property set... Aggiungi un set di proprietà... - + New... Nuovo... - + New property Nuova proprietà - + New property set Nuovo set di proprietà @@ -5503,7 +5503,7 @@ Creazione Edificio interrotta. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Usa il colore del materiale come colore della forma di questo oggetto, se disponibile diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index 594a7737ad..6ac961dac0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -2127,7 +2127,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2408,7 +2408,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2418,7 +2418,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 追加 @@ -2434,7 +2434,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 編集 @@ -2457,7 +2457,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components コンポーネント @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type タイプ @@ -2554,7 +2554,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3067,7 +3067,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value 値 @@ -3157,17 +3157,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3178,103 +3178,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects オブジェクト - + Fixtures Fixtures - + Group グループ - + Hosts ホスト - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property プロパティ - + Add property... Add property... - + Add property set... Add property set... - + New... 新規... - + New property New property - + New property set New property set @@ -5499,7 +5499,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.ts b/src/Mod/Arch/Resources/translations/Arch_ka.ts index e8a9af1535..8ffc6febab 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ka.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ka.ts @@ -2127,7 +2127,7 @@ Site creation aborted. - + Please select a base object გთხოვთ, აირჩიოთ საბაზისო ობიექტი @@ -2408,7 +2408,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2418,7 +2418,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add დამატება @@ -2434,7 +2434,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit ჩასწორება @@ -2457,7 +2457,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components კომპონენტები @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type ტიპი @@ -2554,7 +2554,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes ღერძები @@ -3067,7 +3067,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value მნიშვნელობა @@ -3157,17 +3157,17 @@ Floor creation aborted. შემოტანა წარმატებით დასრულდა - + Error computing the shape of this object შეცდომა ამ ობიექტის ფორმის გამოთვლისას - + has no solid არ გააჩნია დახურული ფორმა - + has an invalid shape აქვს არასწორი ფორმა @@ -3178,103 +3178,103 @@ Floor creation aborted. - + has a null shape აქვს ცარიელი ფორმა - + Toggle subcomponents ქვეკომპონენტების ჩართ/გამორთ - + Closing Sketch edit ესკიზის ჩასწორების დახურვა - + Component კომპონენტი - + Components of this object ამ ობიექტის კომპონენტები - + Base component საბაზისო კომპონენტი - + Additions დამატებები - + Subtractions გამოკლებები - + Objects ობიექტები - + Fixtures არმატურები - + Group ჯგუფი - + Hosts ჰოსტები - + Edit IFC properties IFC თვისებების ჩასწორება - + Edit standard code სტანდარტული კოდის ჩასწორება - + Property თვისება - + Add property... თვისების დამატება... - + Add property set... თვისებების ჯგუფის დამატება... - + New... ახალი... - + New property ახალი თვისება - + New property set ახალი თვისებების ჯგუფი @@ -5505,7 +5505,7 @@ Building creation aborted. არასავალდებულო ღერძი ან ღერძების სისტემა რომელზეც ეს ობიექტი დადუბლირდება - + Use the material color as this object's shape color, if available ხელმისაწვდომობის შემთხვევაში ობიექტის მონახაზის ფერად მასალის ფერის გამოყენება diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index 4a069a80e6..5fed3d301c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -2143,7 +2143,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2424,7 +2424,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2434,7 +2434,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 추가하기 @@ -2450,7 +2450,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 편집 @@ -2473,7 +2473,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Components @@ -2491,7 +2491,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type 유형 @@ -2570,7 +2570,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3083,7 +3083,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value 값 @@ -3173,17 +3173,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3194,103 +3194,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects 오브젝트 - + Fixtures Fixtures - + Group 그룹 - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property 속성 - + Add property... Add property... - + Add property set... Add property set... - + New... 새로 만들기... - + New property New property - + New property set New property set @@ -5515,7 +5515,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index dae0589a0b..d6a05f9976 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -2139,7 +2139,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2420,7 +2420,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2430,7 +2430,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Toevoegen @@ -2446,7 +2446,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Bewerken @@ -2469,7 +2469,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Onderdelen @@ -2487,7 +2487,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Type @@ -2566,7 +2566,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3079,7 +3079,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Waarde @@ -3169,17 +3169,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3190,103 +3190,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objecten - + Fixtures Fixtures - + Group Groep - + Hosts Gastheer - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Eigenschap - + Add property... Add property... - + Add property set... Add property set... - + New... Nieuw... - + New property New property - + New property set New property set @@ -5511,7 +5511,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index d1204486ce..7826ad727d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -2148,7 +2148,7 @@ Tworzenie terenu zostało przerwane. - + Please select a base object Wybierz obiekt bazowy @@ -2429,7 +2429,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Remove @@ -2439,7 +2439,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Add Dodaj @@ -2455,7 +2455,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Edit Edycja @@ -2478,7 +2478,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Components Fragmenty @@ -2496,7 +2496,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Type Typ @@ -2575,7 +2575,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Axes Osie @@ -3088,7 +3088,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Value Wartość @@ -3178,17 +3178,17 @@ Tworzenie piętra zostało przerwane. Pomyślnie zaimportowano - + Error computing the shape of this object Błąd obliczeń kształtu tego obiektu - + has no solid nie ma bryły - + has an invalid shape ma nieprawidłowy kształt @@ -3199,103 +3199,103 @@ Tworzenie piętra zostało przerwane. - + has a null shape ma kształt zerowy - + Toggle subcomponents Przełącz komponenty podrzędne - + Closing Sketch edit Zamykanie edycji szkicu - + Component Komponent - + Components of this object Komponenty tego obiektu - + Base component Komponent bazowy - + Additions Dodania - + Subtractions Odjęcia - + Objects Obiekty - + Fixtures Uchwyty - + Group Grupa - + Hosts Obiekty nadrzędne - + Edit IFC properties Edytuj właściwości IFC - + Edit standard code Edytuj kod standardowy - + Property Własność - + Add property... Dodaj właściwość ... - + Add property set... Dodaj zestaw właściwości ... - + New... Nowy... - + New property Nowa właściwość - + New property set Nowy zestaw właściwości @@ -5520,7 +5520,7 @@ Tworzenie budynku zostało przerwane. Opcjonalna oś lub układ osi, na których ten obiekt powinien być powielany - + Use the material color as this object's shape color, if available Użyj koloru materiału jako koloru kształtu tego obiektu, jeśli dostępne diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 238f0bf4bd..fccae66130 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -2131,7 +2131,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2412,7 +2412,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2422,7 +2422,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Adicionar @@ -2438,7 +2438,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar @@ -2461,7 +2461,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Componentes @@ -2479,7 +2479,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipo @@ -2558,7 +2558,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Eixos @@ -3071,7 +3071,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3161,17 +3161,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3182,103 +3182,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objetos - + Fixtures Fixtures - + Group Grupo - + Hosts Anfitriões - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Propriedade - + Add property... Add property... - + Add property set... Add property set... - + New... Novo... - + New property New property - + New property set New property set @@ -5503,7 +5503,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index e4ca2c7420..07c8b92857 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -2137,7 +2137,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2418,7 +2418,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2428,7 +2428,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Adicionar @@ -2444,7 +2444,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar @@ -2467,7 +2467,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Componentes @@ -2485,7 +2485,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipo @@ -2564,7 +2564,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3077,7 +3077,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3167,17 +3167,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3188,103 +3188,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objetos - + Fixtures Fixtures - + Group Grupo - + Hosts hospedeiros - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Propriedade - + Add property... Add property... - + Add property set... Add property set... - + New... Nova ... - + New property New property - + New property set New property set @@ -5509,7 +5509,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index c4314fd8d7..1dd571bb83 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Adaugă @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editare @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Componente @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tip @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valoare @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Obiecte - + Fixtures Fixtures - + Group Grup - + Hosts Gazde - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Proprietate - + Add property... Add property... - + Add property set... Add property set... - + New... Nou... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index ffb684ddc8..29a5f1c726 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index f52b4f5fc7..e84c797ada 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -106,7 +106,7 @@ Father - Отец + Родитель @@ -1734,7 +1734,7 @@ unit to work with when opening the file. Create Structures From Selection - Create Structures From Selection + Создать структуры из выделенного @@ -1744,18 +1744,18 @@ unit to work with when opening the file. Create Structural System - Create Structural System + Создать структурную систему Please select at least an axis object - Please select at least an axis object + Пожалуйста, выберите хотя бы ось Create Structure - Create Structure + Создать структуру @@ -1765,7 +1765,7 @@ unit to work with when opening the file. Base point of column - Base point of column + Точка основания колонны @@ -1781,7 +1781,7 @@ unit to work with when opening the file. Drawing mode - Drawing mode + Режим рисования @@ -1795,7 +1795,7 @@ unit to work with when opening the file. Preset - Preset + Предустановка @@ -1833,7 +1833,7 @@ unit to work with when opening the file. Con&tinue - Con&tinue + &Продолжить @@ -1855,12 +1855,12 @@ unit to work with when opening the file. Node Tools - Node Tools + Инструменты узлов Reset nodes - Reset nodes + Сбросить узлы @@ -1880,27 +1880,27 @@ unit to work with when opening the file. Connect nodes - Connect nodes + Соединить узлы Connects nodes of this element with the nodes of another element - Connects nodes of this element with the nodes of another element + Соединяет узлы элемента с узлами другого элемента Toggle all nodes - Toggle all nodes + Переключить все узлы Toggles all structural nodes of the document on/off - Toggles all structural nodes of the document on/off + Включает/выключает все структурные узлы документа Extrusion Tools - Extrusion Tools + Инструменты выдавливания @@ -1917,43 +1917,43 @@ unit to work with when opening the file. Choose another Structure object: - Choose another Structure object: + Выберите другой объект структуры: The chosen object is not a Structure - The chosen object is not a Structure + Выбранный объект не является структурой The chosen object has no structural nodes - The chosen object has no structural nodes + Выбранный объект не имеет структурных узлов One of these objects has more than 2 nodes - One of these objects has more than 2 nodes + Один из объектов имеет более 2-х узлов Unable to find a suitable intersection point - Unable to find a suitable intersection point + Не удаётся найти подходящую точку пересечения Intersection found. - Intersection found. + Пересечение найдено. Intersection found. - Intersection found. + Пересечение найдено. @@ -1964,7 +1964,7 @@ unit to work with when opening the file. Couldn't compute a shape - Couldn't compute a shape + Не удалось вычислить форму @@ -1979,32 +1979,32 @@ unit to work with when opening the file. You must select exactly one base object - You must select exactly one base object + Необходимо выбрать только один базовый объект The selected object must be a mesh - The selected object must be a mesh + Выбранный объект должен быть полигональной сеткой This mesh has more than 1000 facets. - This mesh has more than 1000 facets. + Эта сетка имеет более 1000 граней. This operation can take a long time. Proceed? - This operation can take a long time. Proceed? + Эта операция может занять много времени. Продолжить? The mesh has more than 500 facets. This will take a couple of minutes... - The mesh has more than 500 facets. This will take a couple of minutes... + Эта сетка имеет более 500 граней. Это займёт пару минут... Create 3 views - Create 3 views + Создать три вида @@ -2014,7 +2014,7 @@ unit to work with when opening the file. Create BuildingPart - Create BuildingPart + Создать строительную деталь @@ -2034,7 +2034,7 @@ unit to work with when opening the file. Write camera position - Write camera position + Записать положение камеры @@ -2114,25 +2114,25 @@ Site creation aborted. Create Roof - Create Roof + Создать крышу Unable to create a roof - Unable to create a roof + Невозможно создать крышу - + Please select a base object - Please select a base object + Пожалуйста, выберите базовый объект Roof - Roof + Крыша @@ -2167,7 +2167,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Angle (deg) - Angle (deg) + Угол (градусы) @@ -2182,7 +2182,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Thickness (mm) - Thickness (mm) + Толщина (мм) @@ -2192,12 +2192,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Height (mm) - Height (mm) + Высота (мм) Door - Door + Дверь @@ -2295,7 +2295,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Error: Unable to download from: - Error: Unable to download from: + Ошибка: Не удалось загрузить: @@ -2327,7 +2327,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Window - Create Window + Добавить окно @@ -2352,7 +2352,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Window options - Window options + Параметры окна @@ -2379,12 +2379,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to create component - Unable to create component + Невозможно создать компонент Window elements - Window elements + Элементы окна @@ -2405,7 +2405,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2415,7 +2415,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Добавить @@ -2431,7 +2431,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Редактировать @@ -2454,7 +2454,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Компоненты @@ -2472,7 +2472,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Тип @@ -2546,14 +2546,14 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - Please select at least one axis + Пожалуйста, выберите по крайней мере одну ось - + Axes - Axes + Оси @@ -2566,12 +2566,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - Successfully written + Успешно записано Truss - Truss + Ферма @@ -2583,7 +2583,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Truss - Create Truss + Добавить ферму @@ -2618,22 +2618,22 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Stairs - Create Stairs + Добавить лестницу Create material - Create material + Создать материал Create multi-material - Create multi-material + Создать многокомпонентный материал Merge duplicates - Merge duplicates + Объединить дубликаты @@ -2644,7 +2644,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela New layer - New layer + Новый слой @@ -2654,7 +2654,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela depends on the object - depends on the object + зависит от объекта @@ -2710,12 +2710,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Total width - Total width + Общая ширина Total height - Total height + Общая высота @@ -2880,7 +2880,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Level - Level + Уровень @@ -2903,7 +2903,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Panel - Create Panel + Добавить панель @@ -2938,13 +2938,13 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Curtain Wall - Curtain Wall + Фасад Create Curtain Wall - Create Curtain Wall + Добавить фасад @@ -3041,18 +3041,18 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Import CSV File - Import CSV File + Импортировать файл CSV Export CSV File - Export CSV File + Экспортировать файл CSV Unable to recognize that file type - Unable to recognize that file type + Не удается определить тип файла @@ -3064,7 +3064,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Значение @@ -3110,7 +3110,7 @@ Floor creation aborted. Create Floor - Create Floor + Добавить этаж @@ -3154,17 +3154,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3175,111 +3175,111 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Объекты - + Fixtures Fixtures - + Group Группа - + Hosts Источники - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Свойство - + Add property... - Add property... + Добавить свойство... - + Add property set... - Add property set... + Добавить набор свойств... - + New... Создать... - + New property - New property + Новое свойство - + New property set - New property set + Новый набор свойств Create Rebar - Create Rebar + Задать армирование @@ -3359,7 +3359,7 @@ Floor creation aborted. Resize - Resize + Изменить размер @@ -3416,7 +3416,7 @@ Building creation aborted. Set text position - Set text position + Задать положение текста @@ -3426,34 +3426,34 @@ Building creation aborted. Wall - Wall + Стена Walls can only be based on Part or Mesh objects - Walls can only be based on Part or Mesh objects + Стены могут основываться только на объектах Part или Mesh Create Wall - Create Wall + Добавить стену First point of wall - First point of wall + Первая точка стены Wall options - Wall options + Параметры стены Wall Presets... - Wall Presets... + Преднастройки стен... @@ -3494,7 +3494,7 @@ Building creation aborted. Please select only wall objects - Please select only wall objects + Пожалуйста, выберите только стены @@ -3574,7 +3574,7 @@ Building creation aborted. Export CSV - Export CSV + Экспортировать в CSV @@ -3869,13 +3869,13 @@ Building creation aborted. The type of this building - The type of this building + Тип здания The height of this object - The height of this object + Высота объекта @@ -3970,7 +3970,7 @@ Building creation aborted. The font size of texts - The font size of texts + Размер шрифта текста @@ -4075,12 +4075,12 @@ Building creation aborted. Outside Diameter - Outside Diameter + Наружный диаметр Wall thickness - Wall thickness + Толщина стен @@ -4090,7 +4090,7 @@ Building creation aborted. Width of the beam - Width of the beam + Ширина балки @@ -4100,7 +4100,7 @@ Building creation aborted. Height of the beam - Height of the beam + Высота балки @@ -4147,12 +4147,12 @@ Building creation aborted. The postal or zip code of this site - The postal or zip code of this site + Почтовый индекс данной строительной площадки The city of this site - The city of this site + Название города данной строительной площадки @@ -4206,7 +4206,7 @@ Building creation aborted. The perimeter length of this terrain - The perimeter length of this terrain + Длина периметра рельефа @@ -4237,12 +4237,12 @@ Building creation aborted. The type of this object - The type of this object + Тип данного объекта The time zone where this site is located - The time zone where this site is located + Часовой пояс данной строительной площадки @@ -4367,7 +4367,7 @@ Building creation aborted. Fuse objects of same material - Fuse objects of same material + Объединять объекты из одного материала @@ -4442,7 +4442,7 @@ Building creation aborted. The width of this window - The width of this window + Ширина окна @@ -4472,7 +4472,7 @@ Building creation aborted. The area of this window - The area of this window + Площадь окна @@ -4522,7 +4522,7 @@ Building creation aborted. The angle of the truss - The angle of the truss + Угол фермы @@ -4532,7 +4532,7 @@ Building creation aborted. The normal direction of this truss - The normal direction of this truss + Направление нормали фермы @@ -4785,17 +4785,17 @@ Building creation aborted. A description for this material - A description for this material + Описание материала A URL where to find information about this material - A URL where to find information about this material + URL-адрес, где можно найти информацию об этом материале The transparency value of this material - The transparency value of this material + Прозрачность материала @@ -4805,7 +4805,7 @@ Building creation aborted. The color of this material when cut - The color of this material when cut + Цвет разреза этого материала @@ -5023,12 +5023,12 @@ Building creation aborted. The line width of the rendered objects - The line width of the rendered objects + Толщина линии отрисованных объектов The color of the panel outline - The color of the panel outline + Цвет контура панели @@ -5096,13 +5096,13 @@ Building creation aborted. A margin inside the boundary - A margin inside the boundary + Внутренний отступ от границы Turns the display of the margin on/off - Turns the display of the margin on/off + Включает / выключает отображение отступа @@ -5117,22 +5117,22 @@ Building creation aborted. The font file - The font file + Файл шрифта The width of the sheet - The width of the sheet + Ширина листа The height of the sheet - The height of the sheet + Высота листа The fill ratio of this sheet - The fill ratio of this sheet + Коэффициент заполнения листа @@ -5242,17 +5242,17 @@ Building creation aborted. The number of panels - The number of panels + Количество панелей The thickness of the panels - The thickness of the panels + Толщина панелей Swaps horizontal and vertical lines - Swaps horizontal and vertical lines + Поменять местами горизонтальные и вертикальные линии @@ -5358,7 +5358,7 @@ Building creation aborted. The placement of this object - The placement of this object + Размещение объекта @@ -5418,7 +5418,7 @@ Building creation aborted. The color of this axis - The color of this axis + Цвет оси @@ -5428,12 +5428,12 @@ Building creation aborted. The font to use for texts - The font to use for texts + Шрифт, используемый для текста The font size - The font size + Размер шрифта @@ -5463,7 +5463,7 @@ Building creation aborted. A material for this object - A material for this object + Материал объекта @@ -5483,7 +5483,7 @@ Building creation aborted. The perimeter length of the horizontal area - The perimeter length of the horizontal area + Длина периметра горизонтальной области @@ -5496,7 +5496,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available @@ -5618,18 +5618,18 @@ Building creation aborted. The transparency of this object - The transparency of this object + Прозрачность объекта Show the cut in the 3D view - Show the cut in the 3D view + Показать сечение в окне 3D-просмотра The color of this object - The color of this object + Цвет объекта @@ -5645,13 +5645,13 @@ Building creation aborted. The name of the font - The name of the font + Название шрифта The size of the text font - The size of the text font + Размер шрифта текста @@ -6092,7 +6092,7 @@ Building creation aborted. Roof - Roof + Крыша @@ -6183,7 +6183,7 @@ Building creation aborted. Truss - Truss + Ферма @@ -6217,7 +6217,7 @@ Building creation aborted. Creates a stairs object - Creates a stairs object + Создаёт объект лестницы @@ -6417,7 +6417,7 @@ Building creation aborted. Curtain Wall - Curtain Wall + Фасад @@ -6478,7 +6478,7 @@ Building creation aborted. Level - Level + Уровень @@ -6513,12 +6513,12 @@ Building creation aborted. Custom Rebar - Custom Rebar + Пользовательская арматура Creates a Reinforcement bar from the selected face of solid object and/or a sketch - Creates a Reinforcement bar from the selected face of solid object and/or a sketch + Создает арматурный стержень из выбранной грани твёрдого объекта и/или эскиза @@ -6552,7 +6552,7 @@ Building creation aborted. Wall - Wall + Стена @@ -6578,7 +6578,7 @@ Building creation aborted. Add component - Add component + Добавить компонент @@ -6591,7 +6591,7 @@ Building creation aborted. Remove component - Remove component + Удалить компонент @@ -6721,7 +6721,7 @@ Building creation aborted. Clone component - Clone component + Клонировать компонент diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index fda365fcde..e4a4686953 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -2144,7 +2144,7 @@ Ustvarjanje lokacije prekinjeno. - + Please select a base object Izberite osnovni objekt @@ -2425,7 +2425,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2435,7 +2435,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Dodaj @@ -2451,7 +2451,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Uredi @@ -2474,7 +2474,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Sestavine @@ -2492,7 +2492,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Vrsta @@ -2571,7 +2571,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Osi @@ -3084,7 +3084,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Vrednost @@ -3174,17 +3174,17 @@ Ustvarjanje etaže prekinjeno. Uspešno uvoženo - + Error computing the shape of this object Napaka pri računanju oblike tega predmeta - + has no solid nima telesa - + has an invalid shape ima neveljavno obliko @@ -3195,103 +3195,103 @@ Ustvarjanje etaže prekinjeno. - + has a null shape ima ničelno obliko - + Toggle subcomponents Preklapljanje podsestavin - + Closing Sketch edit Zapiranje urejanja očrta - + Component Sestavina - + Components of this object Sestavine tega predmeta - + Base component Osnovna sestavina - + Additions Prištevki - + Subtractions Odštevanja - + Objects Predmeti - + Fixtures Vgrajena oprema - + Group Skupina - + Hosts Gostitelj - + Edit IFC properties Uredi lastnosti IFC - + Edit standard code Urejanje standardne kode - + Property Lastnost - + Add property... Dodaj lastnost ... - + Add property set... Dodaj nabor lastnosti ... - + New... Nov... - + New property Nova lastnost - + New property set Nov nabor lastnosti @@ -5514,7 +5514,7 @@ Ustvarjanj stavbe prekinjeno. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm b/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm index eead936251..d2f60ec1c7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm and b/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts index cefdeb8fb0..4480fba443 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Dodaj @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Uredi @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Komponente @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Vrsta @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -2791,7 +2791,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Chamfer - Obori ivice + Obaranje ivica @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Vrednost @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Predmeti - + Fixtures Fixtures - + Group Grupa - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Osobina - + Add property... Add property... - + Add property set... Add property set... - + New... Novi... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available @@ -5966,7 +5966,7 @@ Building creation aborted. Draft - Crtež + Zakošenje diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.qm b/src/Mod/Arch/Resources/translations/Arch_sr.qm index 601fae49ac..6843e77464 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr.qm and b/src/Mod/Arch/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 52bd013dee..502584d015 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Додај @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Уреди @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Компоненте @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Врста @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -2791,7 +2791,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Chamfer - Обори ивице + Обaрање ивица @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Вредност @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Предмети - + Fixtures Fixtures - + Group Група - + Hosts Hosts - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Оcобина - + Add property... Add property... - + Add property set... Add property set... - + New... Нови... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available @@ -5966,7 +5966,7 @@ Building creation aborted. Draft - Цртеж + Закошење diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index ea63a9f796..605f01f861 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -2143,7 +2143,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2424,7 +2424,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2434,7 +2434,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Lägg till @@ -2450,7 +2450,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Redigera @@ -2473,7 +2473,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Komponenter @@ -2491,7 +2491,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Typ @@ -2570,7 +2570,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3083,7 +3083,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Värde @@ -3173,17 +3173,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3194,103 +3194,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objekt - + Fixtures Fixtures - + Group Grupp - + Hosts Värdar - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Egenskap - + Add property... Add property... - + Add property set... Add property set... - + New... Ny... - + New property New property - + New property set New property set @@ -5515,7 +5515,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index 913ff0eb89..a6e1040f54 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -2140,7 +2140,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2421,7 +2421,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2431,7 +2431,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Ekle @@ -2447,7 +2447,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Düzenle @@ -2470,7 +2470,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Bileşenler @@ -2488,7 +2488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Türü @@ -2567,7 +2567,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3080,7 +3080,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Değer @@ -3170,17 +3170,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3191,103 +3191,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Nesneler - + Fixtures Fixtures - + Group Grup - + Hosts Sunucular - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Özellik - + Add property... Add property... - + Add property set... Add property set... - + New... Yeni... - + New property New property - + New property set New property set @@ -5512,7 +5512,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index fb4bbff716..c764aa1479 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Додати @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Правка @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Компоненти @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Тип @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Значення @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Об'єкти - + Fixtures Fixtures - + Group Група - + Hosts Хости - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Властивість - + Add property... Add property... - + Add property set... Add property set... - + New... Новий... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index bfa45c46d3..247333103c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -2114,7 +2114,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2395,7 +2395,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2405,7 +2405,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Afegir @@ -2421,7 +2421,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Edita @@ -2444,7 +2444,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Components @@ -2462,7 +2462,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Tipus @@ -2541,7 +2541,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3054,7 +3054,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Valor @@ -3144,17 +3144,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3165,103 +3165,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Objectes - + Fixtures Fixtures - + Group Grup - + Hosts Amfitrions - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Propietat - + Add property... Add property... - + Add property set... Add property set... - + New... Nou... - + New property New property - + New property set New property set @@ -5486,7 +5486,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index 2a3a788508..e1c2428dfb 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -2145,7 +2145,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2426,7 +2426,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Thêm mới @@ -2452,7 +2452,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Chỉnh sửa @@ -2475,7 +2475,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components Các bộ phận @@ -2493,7 +2493,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type Kiểu @@ -2572,7 +2572,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3085,7 +3085,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value Giá trị @@ -3175,17 +3175,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3196,103 +3196,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects Các vật thể - + Fixtures Fixtures - + Group Nhóm - + Hosts Máy chủ lưu trữ - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property Thuộc tính - + Add property... Add property... - + Add property set... Add property set... - + New... Mới... - + New property New property - + New property set New property set @@ -5517,7 +5517,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index 3c20aa1067..e3e477b8c1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -2129,7 +2129,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2410,7 +2410,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2420,7 +2420,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 添加 @@ -2436,7 +2436,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 编辑 @@ -2459,7 +2459,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components 组件 @@ -2477,7 +2477,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type 类型 @@ -2556,7 +2556,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3069,7 +3069,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value 值 @@ -3159,17 +3159,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3180,103 +3180,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects 对象 - + Fixtures Fixtures - + Group 组 - + Hosts 主机 - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property 属性 - + Add property... Add property... - + Add property set... Add property set... - + New... 新建... - + New property New property - + New property set New property set @@ -5501,7 +5501,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 1329ae5e57..05afd5a53a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -2132,7 +2132,7 @@ Site creation aborted. - + Please select a base object Please select a base object @@ -2413,7 +2413,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -2423,7 +2423,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 新增 @@ -2439,7 +2439,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 編輯 @@ -2462,7 +2462,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components 組件 @@ -2480,7 +2480,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Type 類型 @@ -2559,7 +2559,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes Axes @@ -3072,7 +3072,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Value 值 @@ -3162,17 +3162,17 @@ Floor creation aborted. Successfully imported - + Error computing the shape of this object Error computing the shape of this object - + has no solid has no solid - + has an invalid shape has an invalid shape @@ -3183,103 +3183,103 @@ Floor creation aborted. - + has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents - + Closing Sketch edit Closing Sketch edit - + Component Component - + Components of this object Components of this object - + Base component Base component - + Additions Additions - + Subtractions Subtractions - + Objects 物件 - + Fixtures Fixtures - + Group 群組 - + Hosts 主體 - + Edit IFC properties Edit IFC properties - + Edit standard code Edit standard code - + Property 屬性 - + Add property... Add property... - + Add property set... Add property set... - + New... 新增... - + New property New property - + New property set New property set @@ -5504,7 +5504,7 @@ Building creation aborted. An optional axis or axis system on which this object should be duplicated - + Use the material color as this object's shape color, if available Use the material color as this object's shape color, if available diff --git a/src/Mod/Draft/Resources/translations/Draft_be.qm b/src/Mod/Draft/Resources/translations/Draft_be.qm index 1ec1225e25..f99d401a83 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_be.qm and b/src/Mod/Draft/Resources/translations/Draft_be.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_be.ts b/src/Mod/Draft/Resources/translations/Draft_be.ts index b801bef6c0..ea8773dfa6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_be.ts +++ b/src/Mod/Draft/Resources/translations/Draft_be.ts @@ -89,7 +89,7 @@ Show line - Адлюстраваць лінію + Паказаць лінію @@ -178,12 +178,12 @@ If it is checked it will show the unit next to the dimension value - Калі птушка, побач са значэннем вымярэння будзе адлюстроўвацца адзінка вымярэння + Калі птушка, побач са значэннем вымярэння будзе паказана адзінка вымярэння Show unit - Адлюстраваць адзінку вымярэння + Паказаць адзінку вымярэння @@ -377,7 +377,7 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Калі птушка, выніковыя аб'екты ў масіве будуць аб'яднаныя, калі яны дакранаюцца адзін з адным. -Гэта працуе толькі калі выключана "Звязаная сетка". +Гэта працуе толькі калі выключана "Артаганальная сетка". @@ -514,7 +514,7 @@ Negative values will result in copies produced in the negative direction.If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Калі птушка, выніковыя аб'екты ў масіве будуць аб'яднаныя, калі яны дакранаюцца адзін з адным. -Гэта працуе толькі калі выключана "Звязаная сетка". +Гэта працуе толькі калі выключана "Артаганальная сетка". @@ -616,7 +616,7 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Калі птушка, выніковыя аб'екты ў масіве будуць аб'яднаныя, калі яны дакранаюцца адзін з адным. -Гэта працуе толькі калі выключана "Звязаная сетка". +Гэта працуе толькі калі выключана "Артаганальная сетка". @@ -777,9 +777,8 @@ view each time a command is started An optional offset to give to the working plane above its base position. Use this together with one of the buttons above - Неабавязковае зрушэнне працоўнай плоскасці -над яе базавым становішчам. Ужывайце разам з адной -з кнопак вышэй + Неабавязковае зрушэнне працоўнай плоскасці над яе асноўным становішчам. +Ужывайце разам з адной з кнопак вышэй @@ -828,7 +827,7 @@ will be moved to the center of the view Grid spacing - Grid spacing + Крок сеткі @@ -849,7 +848,7 @@ will be moved to the center of the view lines - lines + лініі @@ -934,7 +933,7 @@ value by using the [ and ] keys while drawing Draw style - Draw style + Стыль прадстаўлення @@ -1115,12 +1114,12 @@ value by using the [ and ] keys while drawing Show unit - Адлюстраваць адзінку вымярэння + Паказаць адзінку вымярэння If the unit suffix is shown on dimension texts or not - Адлюстроўваць прыстаўку адзінкі вымярэння ў тэкстах вымярэнняў, ці не + Паказваць прыстаўку адзінкі вымярэння ў тэкстах вымярэнняў, ці не @@ -1135,7 +1134,7 @@ value by using the [ and ] keys while drawing Apply above style to selected object(s) - Прымяніць вышэйзгаданыя стыль да абранага аб'екта(аў) + Прымяніць вышэйзгаданы стыль да абраных аб'ектаў @@ -1193,7 +1192,7 @@ value by using the [ and ] keys while drawing None - None + Нічога @@ -1235,12 +1234,12 @@ Values with differences below this value will be treated as same. This value wil If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too. - Калі птушка, спіс слаёў таксама будзе адлюстроўваць суполкі, што дазволіць вам аўтаматычна дадаваць аб'екты ў групы. + Калі птушка, спіс слаёў таксама будзе паказваць суполкі, што дазволіць вам аўтаматычна дадаваць аб'екты ў групы. Show groups in layers list drop-down button - Адлюстроўваць суполкі ў выпадальным спісе пластоў + Паказаць суполкі ў выпадальным спісе пластоў @@ -1264,17 +1263,17 @@ This allows to point the direction and type the distance. Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. Звычайна пасля капіравання аб'ектаў абіраюцца копіі. -Калі птушка, замест яе будуць абраныя базавыя аб'екты. +Калі птушка, замест яе будуць абраныя асноўныя аб'екты. Select base objects after copying - Абраць базавыя аб'екты пасля капіравання + Абраць асноўныя аб'екты пасля капіравання If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 - Калі птушка, пры стварэнні аб'ектаў Чарнавіка па-над існуючай грані іншага аб'екта, уласцівасці "Падтрымка" аб'екта Чарнавіка будзе прысвоена значэнне базавага аб'екта. Гэтае было стандартнымі паводзінамі да FreeCAD 0.19 + Калі птушка, пры стварэнні аб'ектаў Чарнавіка па-над існуючай грані іншага аб'екта, уласцівасці "Падтрымка" аб'екта Чарнавіка будзе прысвоена значэнне асноўнага аб'екта. Гэтае было стандартнымі паводзінамі да FreeCAD 0.19 @@ -1405,7 +1404,7 @@ Note that this is not fully supported, and many object will be not editable with Show Working Plane tracker - Адлюстраваць трэкер працоўнай плоскасці + Паказаць трэкер працоўнай плоскасці @@ -1675,7 +1674,7 @@ such as "Arial:Bold" Show the unit suffix in dimensions - Адлюстраваць прыстаўку адзінкі вымярэння ў вымярэннях + Паказаць прыстаўку адзінкі вымярэння ў вымярэннях @@ -1811,12 +1810,12 @@ This value is the maximum segment length. This preferences dialog will be shown when importing/ exporting DXF files - Дыялогавае акно пераваг будзе адлюстроўвацца пры імпартаванні/экспартаванні файлаў DXF + Дыялогавае акно пераваг будзе паказана пры імпартаванні/экспартаванні файлаў DXF Show this dialog when importing and exporting - Адлюстраваць дыялогавае акно пры імпартаванні і экспартаванні + Паказаць дыялогавае акно пры імпартаванні і экспартаванні @@ -1845,21 +1844,21 @@ Note: C++ exporter is faster, but is not as featureful yet Automatic update (legacy importer only) - Automatic update (legacy importer only) + Аўтаматычнае абнаўленне (толькі састарэлы імпарцёр) Allow FreeCAD to download the Python converter for DXF import and export. You can also do this manually by installing the "dxf_library" workbench from the Addon Manager. - Allow FreeCAD to download the Python converter for DXF import and export. -You can also do this manually by installing the "dxf_library" workbench -from the Addon Manager. + Дазваляе FreeCAD спампаваць канвертар Python для імпартавання і экспартавання DXF. +Вы таксама можаце зрабіць гэта ўручную, калі ўсталюеце варштат "dxf_library" +з Кіравання дадаткамі. Allow FreeCAD to automatically download and update the DXF libraries - Allow FreeCAD to automatically download and update the DXF libraries + Дазволіць FreeCAD аўтаматычна спампоўваць і абнаўляць бібліятэкі DXF @@ -1871,52 +1870,52 @@ from the Addon Manager. Note: Not all the options below are used by the new importer yet - Note: Not all the options below are used by the new importer yet + Заўвага: новы імпарцёр яшчэ не ўжывае ўсе прыведзеныя ніжэй налады Import - Import + Імпарт If unchecked, texts and mtexts won't be imported - If unchecked, texts and mtexts won't be imported + Калі не птушка, тэксты і вымярэнні імпартавацца не будуць texts and dimensions - texts and dimensions + тэксты і вымярэнні If unchecked, points won't be imported - If unchecked, points won't be imported + Калі не птушка, кропкі імпартавацца не будуць points - points + кропкі If checked, paper space objects will be imported too - If checked, paper space objects will be imported too + Калі птушка, аб'екты з вобласці паперы таксама будуць імпартаваныя layouts - layouts + макеты старонак If you want the non-named blocks (beginning with a *) to be imported too - If you want the non-named blocks (beginning with a *) to be imported too + Калі птушка, безназоўныя блокі (якія пачынаюцца з *) таксама будуць імпартаваныя *blocks - *blocks + *блокі @@ -1926,37 +1925,37 @@ from the Addon Manager. Only standard Part objects will be created (fastest) - Only standard Part objects will be created (fastest) + Будуць створаныя толькі стандартныя аб'екты дэталі (самы хуткі) simple Part shapes - simple Part shapes + простыя фігуры Дэталі Parametric Draft objects will be created whenever possible - Parametric Draft objects will be created whenever possible + Параметрычныя аб'екты Чарнавіка будуць створаныя кожны раз, калі гэтае магчыма Draft objects - Draft objects + Аб'екты Чарнавіка Sketches will be created whenever possible - Sketches will be created whenever possible + Эскізы будуць створаныя кожны раз, калі гэтае магчыма Sketches - Sketches + Эскізы Scale factor to apply to imported files - Scale factor to apply to imported files + Маштабны каэфіцыент для імпартаваных файлаў @@ -1964,112 +1963,108 @@ from the Addon Manager. The factor is the conversion between the unit of your DXF file and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 - Scale factor to apply to DXF files on import. -The factor is the conversion between the unit of your DXF file and millimeters. -Example: for files in millimeters: 1, in centimeters: 10, - in meters: 1000, in inches: 25.4, in feet: 304.8 + Маштабны каэфіцыент, які ўжываецца да файлаў DXF пры імпартаванні. +Каэфіцыентам з'яўляецца пераўтварэнне адзінак вымярэння вашага файла DXF у міліметры. +Напрыклад: для файлаў у міліметрах: 1, у сантыметрах: 10, у метрах: 1000, у цалях: 25,4, у футах: 304,8 Colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - Colors will be retrieved from the DXF objects whenever possible. -Otherwise default colors will be applied. + Колеры будуць атрыманыя з аб'ектаў DXF кожны раз, калі гэтае магчыма. +У адваротным выпадку будуць ужытыя першапачатковыя колеры. Get original colors from the DXF file - Get original colors from the DXF file + Атрымаць зыходныя колеру з файла DXF FreeCAD will try to join coincident objects into wires. Note that this can take a while! - FreeCAD will try to join coincident objects into wires. -Note that this can take a while! + FreeCAD паспрабуе злучыць аб'екты, якія супадаюць, у ломаныя лініі. +Звярніце ўвагу, што гэта можа заняць некаторы час! Join geometry - Join geometry + Аб'яднаць геаметрыю Objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - Objects from the same layers will be joined into Draft Blocks, -turning the display faster, but making them less easily editable + Аб'екты з адных і тых жа пластоў будуць аб'яднаныя ў блокі Чарнавіка, што паскорыць адлюстраванне, але абцяжарыць іх змену Group layers into blocks - Group layers into blocks + Групаваць пласты ў блокі Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document - Imported texts will get the standard Draft Text size, -instead of the size they have in the DXF document + Імпартаваныя тэксты атрымаюць стандартны памер тэксту Чарнавіка, замест памеру з дакумента DXF Use standard font size for texts - Use standard font size for texts + Ужываць стандартны памер шрыфту для тэкстаў If this is checked, DXF layers will be imported as Draft Layers - If this is checked, DXF layers will be imported as Draft Layers + Калі птушка, пласты DXF будуць імпартаваныя як пласты Чарнавіка Use Layers - Use Layers + Ужываць пласты Hatches will be converted into simple wires - Hatches will be converted into simple wires + Штрыхоўкі будуць пераўтвораныя ў простыя ломаныя лініі Import hatch boundaries as wires - Import hatch boundaries as wires + Імпартаваць контуры штрыхоўкі як ломаныя лініі If polylines have a width defined, they will be rendered as closed wires with correct width - If polylines have a width defined, they will be rendered -as closed wires with correct width + Калі ломаныя лініі маюць пэўную шырыню, яны будуць візуалізаваныя як замкнутыя ломаныя лініі з правільнай шырынёй Render polylines with width - Render polylines with width + Візуалізаваць ломаныя лініі з шырынёй Ellipse export is poorly supported. Use this to export them as polylines instead. - Ellipse export is poorly supported. Use this to export them as polylines instead. + Экспартаванне эліпса падтрымліваецца дрэнна. Экспартуйце іх у выглядзе ломанай лініі. Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Разглядайце эліпсы і сплайны як ломаныя лініі Max Spline Segment: - Max Spline Segment: + Найбольшы адрэзак сплайну: Maximum length of each of the polyline segments. If it is set to '0' the whole spline is treated as a straight segment. - Maximum length of each of the polyline segments. -If it is set to '0' the whole spline is treated as a straight segment. + Найбольшая даўжыня кожнага з адрэзкаў ломанай лініі. +Калі ён усталяваны ў '0', то ўвесь сплайн апрацоўваецца як прамы сегмент. @@ -2080,230 +2075,230 @@ If it is set to '0' the whole spline is treated as a straight segment. All objects containing faces will be exported as 3D polyfaces - All objects containing faces will be exported as 3D polyfaces + Усе аб'екты, якія змяшчаюць грані, будуць экспартаваныя ў выглядзе трохмерных шматграней Export 3D objects as polyface meshes - Export 3D objects as polyface meshes + Экспартаваць трохмерныя аб'екты ў выглядзе шматгранных сетак Drawing Views will be exported as blocks. This might fail for post DXF R12 templates. - Drawing Views will be exported as blocks. -This might fail for post DXF R12 templates. + Выгляды чарцяжоў будуць экспартаваныя ў выглядзе блокаў. +Гэта можа не атрымацца для шаблонаў DXF R12. Export Drawing Views as blocks - Export Drawing Views as blocks + Экспартаваць выгляды чарцяжоў як блокі Exported objects will be projected to reflect the current view direction - Exported objects will be projected to reflect the current view direction + Экспартаваныя аб'екты будуць праецыявацца ў адпаведнасці з бягучым напрамкам выгляду Project exported objects along current view direction - Project exported objects along current view direction + Праецыраваць экспартаваныя аб'екты наўздоўж бягучага напрамку выгляду Grid and snapping - Grid and snapping + Сетка і прывязка Snapping - Snapping + Прывязка If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + Калі птушка, прывязка задзейнічае без неабходнасці націску клавішы мадыфікатара прывязкі Always snap (disable snap mod) - Always snap (disable snap mod) + Заўсёды прывязваць (адключыць мадыфікатар прывязкі) Constrain mod - Constrain mod + Мадыфікатар абмежаванняў The Constraining modifier key - The Constraining modifier key + Клавіша мадыфікатара абмежавання Shift - Shift + <Shift> Ctrl - Ctrl + <Ctrl> Alt - Alt + <Alt> Snap mod - Snap mod + Мадыфікатар прывязкі The snap modifier key - The snap modifier key + Клавіша мадыфікатара прывязкі Alt mod - Alt mod + Мадыфікатар Alt The Alt modifier key - The Alt modifier key + Клавіша мадыфікатара Alt If checked, the Snap toolbar will be shown whenever you use snapping - If checked, the Snap toolbar will be shown whenever you use snapping + Калі птушка, панэль інструментаў прывязкі будзе паказвацца кожны раз, калі вы ўжываеце прывязку Show Draft Snap toolbar - Show Draft Snap toolbar + Паказаць панэль інструментаў прывязкі Чарнавіка Hide Draft snap toolbar after use - Hide Draft snap toolbar after use + Схаваць панэль інструментаў прывязкі Чарнавіка пасля ўжывання Grid - Grid + Сетка If checked, a grid will appear when drawing - If checked, a grid will appear when drawing + Калі птушка, пры маляванні чарцяжа будзе адлюстроўвацца сетка Use grid - Use grid + Ужыць сетку If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command + Калі птушка, сетка Чарнавіка заўсёды будзе бачная, калі варштат Чарнавіка актыўны. Інакш толькі пры ўжыванні каманды Always show the grid - Always show the grid + Заўсёды паказваць сетку If checked, an additional border is displayed around the grid, showing the main square size in the bottom left border - If checked, an additional border is displayed around the grid, showing the main square size in the bottom left border + Калі птушка, вакол сеткі адлюстроўваецца дадатковая мяжа, якая паказвае памер асноўнага квадрата ў ніжнім левым куце Show grid border - Show grid border + Паказаць мяжу сеткі <html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if &quot;Show grid border&quot; option is enabled.</p></body></html> - <html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if &quot;Show grid border&quot; option is enabled.</p></body></html> + <html><head/><body><p>Калі птушка, у левым ніжнім куце сеткі адлюстроўваецца контур чалавечай фігуры. Гэтая налада эфектыўна толькі ў тым выпадку, калі ўсталяваны варштат BIM і ўключана налада &quot;Паказаць мяжу сеткі&quot;.</p></body></html> Show human figure - Show human figure + Паказаць фігуру чалавека If set, the grid will have its two main axes colored in red, green or blue when they match global axes - If set, the grid will have its two main axes colored in red, green or blue when they match global axes + Калі зададзена, дзве асноўныя восі сеткі будуць афарбаваныя ў чырвоны, зялёны ці сіні колер, калі яны супадаюць з глабальнымі восямі Use colored axes - Use colored axes + Ужываць каляровыя восі Main lines every - Main lines every + Асноўная лініі кожныя Mainlines will be drawn thicker. Specify here how many squares between mainlines. - Mainlines will be drawn thicker. Specify here how many squares between mainlines. + Асноўныя лініі будуць намаляваныя таўсцей. Пакажыце тут, колькі квадратаў паміж асноўнымі лініямі. Grid spacing - Grid spacing + Крок сеткі The spacing between each grid line - The spacing between each grid line + Адлегласць паміж кожнай лініяй сеткі Grid size - Grid size + Памер сеткі The number of horizontal or vertical lines of the grid - The number of horizontal or vertical lines of the grid + Колькасць гарызантальных ці вертыкальных ліній на сетцы lines - lines + лініі Grid color and transparency - Grid color and transparency + Колер і празрыстасць сеткі The color of the grid - The color of the grid + Колер сеткі The overall transparency of the grid - The overall transparency of the grid + Агульная празрыстасць сеткі Draft Edit preferences - Draft Edit preferences + Перавагі змены Чарнавіка @@ -2313,37 +2308,37 @@ This might fail for post DXF R12 templates. Maximum number of contemporary edited objects - Maximum number of contemporary edited objects + Найбольшая колькасць аб'ектаў, якія адначасова мяняюцца <html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html> - <html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html> + <html><head/><body><p>Задае найбольшую колькасць аб'ектаў змен Чарнавіка,</p><p>якія можа адначасова апрацаваць</p></body></html> Draft edit pick radius - Draft edit pick radius + Радыус выбару пры змене Чарнавік Controls pick radius of edit nodes - Controls pick radius of edit nodes + Кіруе радыусам выбару вузлоў змены DWG - DWG + DWG DWG conversion - DWG conversion + Пераўтварэнне DWG Conversion method: - Conversion method: + Метад пераўтварэння: @@ -2719,7 +2714,7 @@ This might fail for post DXF R12 templates. Set Working Plane - Set Working Plane + Задаць працоўную плоскасць @@ -2765,7 +2760,7 @@ This might fail for post DXF R12 templates. None - None + Нічога @@ -3033,7 +3028,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Toggle construction mode - Toggle construction mode + Пераключыць будаўнічы рэжым @@ -3169,12 +3164,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Хібнае значэнне памеру. Ужываецца 200.0. Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Хібнае значэнне адсочвання. Ужываецца 0. @@ -3317,19 +3312,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3338,15 +3333,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3375,22 +3370,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3688,7 +3683,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Create Circle (Part) - Create Circle (Part) + Стварыць акружнасць (дэталь) @@ -3698,7 +3693,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Create Arc (Part) - Create Arc (Part) + Стварыць дугу (дэталь) @@ -3719,7 +3714,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - Toggle grid + Пераключыць сетку @@ -3765,7 +3760,7 @@ To enabled FreeCAD to download these libraries, answer Yes. JSON file (*.json) - JSON file (*.json) + Файл JSON (*.json) @@ -3960,7 +3955,7 @@ The final angle will be the base angle plus this amount. Create Polygon (Part) - Create Polygon (Part) + Стварыць шматкутнік (дэталь) @@ -4016,7 +4011,7 @@ The final angle will be the base angle plus this amount. Spline has been closed - Spline has been closed + Сплайн быў замкнуты @@ -4158,7 +4153,7 @@ The final angle will be the base angle plus this amount. Bézier curve has been closed - Bézier curve has been closed + Крывая Без'е была замкнута @@ -4256,7 +4251,7 @@ The final angle will be the base angle plus this amount. No active Draft Toolbar. - No active Draft Toolbar. + Без бягучай панэлі інструментаў Чарнавіка. @@ -4266,12 +4261,12 @@ The final angle will be the base angle plus this amount. Continue mode - Continue mode + Бесперапынны рэжым Toggle display mode - Toggle display mode + Пераключыць рэжым адлюстравання @@ -4284,7 +4279,7 @@ The final angle will be the base angle plus this amount. Create Dimension (radial) - Create Dimension (radial) + Стварыць вымярэнне (радыяльны) @@ -4829,11 +4824,11 @@ The final angle will be the base angle plus this amount. Map mode: - Map mode: + Рэжым супастаўлення: - - + + @@ -4842,9 +4837,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4861,13 +4856,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4919,7 +4914,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4975,7 +4970,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5091,7 +5086,7 @@ The final angle will be the base angle plus this amount. Activate this layer - Activate this layer + Задзейнічаць гэты ўзровень @@ -5202,7 +5197,7 @@ The final angle will be the base angle plus this amount. Object must be a closed shape - Object must be a closed shape + Аб'ект павінен быць замкнутай фігурай @@ -5247,12 +5242,12 @@ The final angle will be the base angle plus this amount. Found 1 closed sketch object: creating a face from it - Found 1 closed sketch object: creating a face from it + Знойдзена адзін замкнуты аб'ект эскіза: стварэнне з яго грані Found closed wires: creating faces - Found closed wires: creating faces + Знойдзены замкнутыя ломаныя лініі: стварэнне граняў @@ -5322,6 +5317,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -5443,7 +5443,7 @@ from menu Tools -> Addon Manager Warning - Warning + Папярэджанне @@ -5543,7 +5543,7 @@ from menu Tools -> Addon Manager _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: Замкнуты з той жа першай/апошняй кропкай. Геаметрыя не абноўлена. @@ -5627,7 +5627,7 @@ from menu Tools -> Addon Manager The export list contains no object with a valid bounding box - The export list contains no object with a valid bounding box + Спіс экспартавання не ўтрымлівае аб'екта з дапушчальнымі габарытамі @@ -5667,7 +5667,7 @@ The path can be a polyline, B-spline, Bezier curve, or even edges from other obj Path Link array - Сетка звязаная па крывой + Артаганальная сетка, якая звязаная па крывой @@ -5729,7 +5729,8 @@ will be used to provide information to the label. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. - Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. + Стварае лінію з некалькімі кропкамі (ламаную лінію). +<Ctrl> для прывязкі, <Shift> для абмежавання. @@ -6063,12 +6064,12 @@ CTRL to snap, SHIFT to constrain. Toggle grid - Toggle grid + Пераключыць сетку Toggles the Draft grid on and off. - Toggles the Draft grid on and off. + Уключае і выключае сетку Чарнавіка. @@ -6186,7 +6187,7 @@ Use TechDraw Workbench instead for generating technical drawings. Creates a point object. Click anywhere on the 3D view. - Creates a point object. Click anywhere on the 3D view. + Стварае аб'ект кропкі. Пстрыкніце ў любым месцы трохмернага прадстаўлення. @@ -6318,8 +6319,8 @@ Then you can use it to save a different camera position and objects' states any Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. - Flip the normal direction of the selected dimensions (linear, radial, angular). -If other objects are selected they are ignored. + Змяняе звычайны напрамак абраных вымярэнняў (лінейнае, радыяльнае, вуглавое). +Калі абраны іншыя аб'екты, яны ігнаруюцца. @@ -6359,8 +6360,8 @@ If other objects are selected they are ignored. Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. CTRL to snap, SHIFT to constrain - Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. -CTRL to snap, SHIFT to constrain + Стварае правільны шматкутнік (трыкутнік, квадрат, пяцікутнік, ...), дзе вызначаныя колькасць бакоў і апісаны радыус. +<Ctrl> для прывязкі, <Shift> для абмежавання @@ -6418,7 +6419,7 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. - Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. + Прымяняе бягучы стыль, які вызначаны на панэлі інструментаў (шырыня лініі і колеры), да абраных аб'ектаў і суполак. @@ -6448,9 +6449,9 @@ CTRL to snap, SHIFT to constrain. Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. - Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. -After the curve is created you can go back to edit each control point and set the properties of each knot. -CTRL to snap, SHIFT to constrain. + Стварае крывую Без'е, якая складаецца з сегментаў 2-й ступені (квадратычных) і 3-й ступені (кубічных). Націсніце і перацягніце, каб вызначыць кожны сегмент. +Пасля стварэння крывой, вы можаце вярнуцца да змены кожнай кантрольнай кропкі, і задаць уласцівасці кожнага вузла. +<Ctrl> для прывязкі, <Shift> для абмежавання. @@ -6477,8 +6478,8 @@ CTRL to snap, SHIFT to constrain. Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. - Creates a circle (full circular arc). -CTRL to snap, ALT to select tangent objects. + Стварае акружнасць (поўную дугу акружнасці). +<Ctrl> для прывязкі, <Alt> для выбару датычных аб'ектаў. @@ -6576,7 +6577,7 @@ First select the base object, and then select the point object. PointLinkArray - Сетка звязаная па кропках + Артаганальная сетка, якая звязаная па кропках @@ -6604,14 +6605,14 @@ A 'Point link array' is more efficient when handling many copies. Toggle construction mode - Toggle construction mode + Пераключыць будаўнічы рэжым Toggles the Construction mode. When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. - Toggles the Construction mode. -When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. + Пераключае рэжым пабудовы. +Калі ўключана, наступныя створаныя аб'екты будуць уключаныя ў суполку пабудовы і будуць начэрчаныя з паказаным колерам і ўласцівасцямі. @@ -6619,16 +6620,16 @@ When this is active, the following objects created will be included in the const Toggle continue mode - Toggle continue mode + Пераключыць бесперапынны рэжым Toggles the Continue mode. When this is active, any drawing tool that is terminated will automatically start again. This can be used to draw several objects one after the other in succession. - Toggles the Continue mode. -When this is active, any drawing tool that is terminated will automatically start again. -This can be used to draw several objects one after the other in succession. + Пераключае бесперапынны рэжым. +Калі ўключана, любы інструмент малявання чарцяжа аўтаматычна запусціцца зноў. +Гэта можна ўжываць для паслядоўнага чарчэння некалькіх аб'ектаў адзін за адным. @@ -6636,16 +6637,16 @@ This can be used to draw several objects one after the other in succession. Toggle normal/wireframe display - Toggle normal/wireframe display + Пераключыць рэжым адлюстравання звычайны/каркасны Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. - Switches the display mode of selected objects from flatlines to wireframe and back. -This is helpful to quickly visualize objects that are hidden by other objects. -This is intended to be used with closed shapes and solids, and doesn't affect open wires. + Пераключае рэжым адлюстравання абраных аб'ектаў з плоскіх ліній на каркасны і наадварот. +Гэта карысна для хуткай візуалізацыі аб'ектаў, якія схаваныя іншымі аб'ектамі. +Гэта прызначана для ўжывання з замкнутымі фігурамі і суцэльнымі целамі, і не ўплывае на адкрытыя ломаныя лініі. @@ -6748,14 +6749,14 @@ The path can be a polyline, B-spline, Bezier curve, or even edges from other obj Path twisted Link array - Path twisted Link array + Артаганальная сетка, якая скручаная па крывой Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. - Like the PathTwistedArray tool, but creates a 'Link array' instead. -A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + Падобны на інструмент 'Артаганальная сетка, якая скручаная па крывой', але замест гэтага стварае 'Артаганальную сетку'. +'Артаганальная сетка' больш эфектыўная пры апрацоўцы вялікай колькасці копій, але налада 'Аб'яднаць' не можа быць ужытая. @@ -6826,10 +6827,9 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. - Upgrades the selected objects into more complex shapes. -The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. -For example, it can join the selected objects into one, convert simple edges into parametric polylines, -convert closed edges into filled faces and parametric polygons, and merge faces into a single face. + Пераўтварыць абраныя аб'екты ў больш складаныя фігуры. +Вынік аперацыі залежыць ад тыпаў аб'ектаў, якія могуць быць абноўлены некалькі разоў запар. +Напрыклад, ён можа аб'ядноўваць выбраныя аб'екты ў адзін, пераўтвараць простыя рэбры ў параметрычныя ломаныя лінія, пераўтвараць замкнутыя рэбры ў запоўненыя грані і параметрычныя шматкутнікі, і аб'ядноўваць грані ў адзіную грань. @@ -6879,8 +6879,8 @@ These projections can be used to create technical drawings with the TechDraw Wor Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. - Creates a shape from a text string by choosing a specific font and a placement. -The closed shapes can be used for extrusions and boolean operations. + Стварае фігуру з тэкставага радка, пры выбары пэўнага шрыфту і размяшчэння. +Замкнутыя фігуры можна ўжываць для выдушвання і лагічных аперацый. @@ -6968,7 +6968,7 @@ It is a list of strings; each element in the list will be displayed in its own l Text string - Text string + Тэкставы радок @@ -7018,7 +7018,7 @@ It is a list of strings; each element in the list will be displayed in its own l If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Калі не птушка, штрыхоўка прымяняецца да граняў як ёсць, без пераносу (гэта можа прывесці да няправільных вынікаў для граняў, выдатных ад XY) @@ -7046,8 +7046,7 @@ set True for fusion or False for compound End angle of the arc (for a full circle, give it same value as First Angle) - End angle of the arc (for a full circle, - give it same value as First Angle) + Канчатковы вугал дугі (для поўнай акружнасці задайце яму тое ж значэнне, што і першаму вуглу) @@ -7130,10 +7129,10 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) - Show the individual array elements (only for Link arrays) + Паказваць асобныя элементы масіва (толькі для артаганальных сетак) @@ -7201,7 +7200,7 @@ depending on the value of 'Straight Direction'. The placement of the 'Text' element in 3D space - The placement of the 'Text' element in 3D space + Размяшчэнне элемента 'Тэкст' у трохмернай прасторы @@ -7260,7 +7259,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7323,7 +7322,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7334,54 +7333,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) - Specifies if the copies should be fused together if they touch each other (slower) + Паказвае, ці павінны копіі быць аб'яднаныя разам, калі яны датычацца адзін аднаго (павольна) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7390,42 +7389,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. @@ -7477,7 +7476,7 @@ This property is read-only, as the number depends on the points in 'Point Object Show hidden lines - Адлюстраваць схаваныя лініі + Паказаць схаваныя лініі @@ -7551,12 +7550,12 @@ This property is read-only, as the number depends on the points in 'Point Object If the Bezier curve should be closed or not - If the Bezier curve should be closed or not + Ці павінна крывая Без'е быць замкнутай, ці не Create a face if this curve is closed - Create a face if this curve is closed + Стварыць грань, калі гэтая крывая замкнутая @@ -7593,9 +7592,9 @@ This property is read-only, as the number depends on the points in 'Point Object End angle of the elliptical arc (for a full circle, give it same value as First Angle) - End angle of the elliptical arc + Канчатковы кут эліптычнай дугі - (for a full circle, give it same value as First Angle) + (для поўнай акружнасці задайце яму тое ж значэнне, што і першаму вуглу) @@ -7704,8 +7703,8 @@ it will be a point that lies on the arc. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. - The direction of the dimension line. -If this remains '(0,0,0)', the direction will be calculated automatically. + Напрамак лініі вымярэння. +Калі гэта значэнне застаецца "(0,0,0)", напрамак будзе разлічаны аўтаматычна. @@ -7735,15 +7734,15 @@ the radius or the diameter value Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - Starting angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. + Пачатковы вугал лініі вымярэння (дугі акружнасці). +Дуга чэрціцца супраць гадзінніка. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - Ending angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. + Канчатковы вугал лініі вымярэння (дугі акружнасці). +Дуга чэрціцца супраць гадзінніка. @@ -7820,7 +7819,7 @@ the 'First Angle' and 'Last Angle' properties. The linked object - The linked object + Звязаны аб'ект @@ -7860,7 +7859,7 @@ the 'First Angle' and 'Last Angle' properties. If checked, source objects are displayed regardless of being visible in the 3D model - If checked, source objects are displayed regardless of being visible in the 3D model + Калі птушка, зыходныя аб'екты адлюстроўваюцца незалежна ад таго, ці бачныя яны ў трохмернай мадэлі @@ -7875,7 +7874,7 @@ the 'First Angle' and 'Last Angle' properties. If the wire is closed or not - If the wire is closed or not + Ломаная лінія замкнутая, ці не @@ -7905,7 +7904,7 @@ the 'First Angle' and 'Last Angle' properties. Create a face if this object is closed - Create a face if this object is closed + Стварыць грань, калі гэты аб'ект замкнуты @@ -7920,12 +7919,12 @@ the 'First Angle' and 'Last Angle' properties. If the B-spline is closed or not - If the B-spline is closed or not + B-сплайн замкнуты, ці не Create a face if this spline is closed - Create a face if this spline is closed + Стварыць грань, калі сплайн замкнуты @@ -7951,7 +7950,7 @@ the 'First Angle' and 'Last Angle' properties. Line spacing (relative to font size) - Line spacing (relative to font size) + Міжрадковы інтэрвал (адносна памеру шрыфту) @@ -8068,8 +8067,8 @@ the 'First Angle' and 'Last Angle' properties. Text Position. Leave '(0,0,0)' for automatic position - Text Position. -Leave '(0,0,0)' for automatic position + Становішча тэксту. +Пакіньце '(0,0,0)' для аўтаматычнага становішча diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 35e9674870..2ea0ad1f8e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index dfe6510889..c6410fa3f0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -16,7 +16,7 @@ The name of your style. Existing style names can be edited. - El nom del vostre estil. Els noms d'estil existent poden ser editats. + El nom del vostre estil. Els noms d'estil existent es poden editar. @@ -26,7 +26,7 @@ Renames the selected style - Canvia el nom als elements seleccionats + Canvia el nom dels elements seleccionats @@ -67,35 +67,35 @@ Font name - Nom de la font + Nom del tipus de lletra The font size in system units - The font size in system units + La mida de lletra en unitats del sistema The line spacing (relative to the font size) - The line spacing (relative to the font size) + Interlineat (relatiu a la mida de lletra) Lines and arrows - Lines and arrows + Línies i fletxes Show line - Show line + Mostra la línia The width of the lines - The width of the lines + L'amplada de les línies @@ -112,18 +112,18 @@ The size of the arrows or markers in system units - The size of the arrows or markers in system units + La mida de les fletxes o els marcadors en unitats del sistema The color of lines and arrows - The color of lines and arrows + El color de les línies i les fletxes Line and arrow color - Line and arrow color + Color de la línia i la fletxa @@ -1381,7 +1381,7 @@ Tingueu en compte que això no és totalment compatible i que molts objectes no Save current color and linewidth across sessions - Guardar color actual i linewidth a través de les sessions + Desa el color i l'amplada de línia actuals a través de les sessions @@ -1739,7 +1739,7 @@ One unit in the SVG file will translate as one millimeter. Translated (for print & display) - Traduit (per impressió i pantalla) + Traduït (per impressió i pantalla) @@ -3287,19 +3287,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3308,15 +3308,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3345,22 +3345,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4802,8 +4802,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4812,9 +4812,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4831,13 +4831,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4889,7 +4889,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4945,7 +4945,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5292,6 +5292,11 @@ The final angle will be the base angle plus this amount. added missing view properties propietats de vista no trobades afegides + + + added property 'Count' + added property 'Count' + Workbench @@ -5413,7 +5418,7 @@ from menu Tools -> Addon Manager Warning - Warning + Avís @@ -6259,9 +6264,9 @@ It creates a construction group if it doesn't exist. Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. + Crea un objecte intermediari a partir del pla de treball actual. +Un cop s'ha creat l'objecte, feu-hi doble clic a la vista en arbre per restaurar la posició de la càmera i les visibilitats dels objectes. +El podeu utilitzar per a desar una posició de la càmera i els estats dels objectes en qualsevol moment que necessiteu. @@ -7100,7 +7105,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7230,7 +7235,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7293,7 +7298,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7304,54 +7309,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7360,42 +7365,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. @@ -8017,7 +8022,7 @@ the 'First Angle' and 'Last Angle' properties. Font name - Nom de la font + Nom del tipus de lletra diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index eb78ef8da6..846221c523 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 42a424afd1..63d3c37501 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -3310,19 +3310,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3331,15 +3331,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3368,22 +3368,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4825,8 +4825,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4835,9 +4835,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4854,13 +4854,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4912,7 +4912,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4968,7 +4968,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,6 +5315,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7123,7 +7128,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7253,7 +7258,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7316,7 +7321,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7327,54 +7332,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7383,42 +7388,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 8b2caeca4e..b4dbe255af 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index de61850627..d0dd9f5996 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -3308,19 +3308,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3329,15 +3329,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3366,22 +3366,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Sichtbarkeit ausgeschaltet; aus der Liste entfernt: - + image is Null Bild ist Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4823,8 +4823,8 @@ The final angle will be the base angle plus this amount. Kartenmodus: - - + + @@ -4833,9 +4833,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4852,13 +4852,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4910,7 +4910,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4966,7 +4966,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5313,6 +5313,11 @@ The final angle will be the base angle plus this amount. added missing view properties fehlende Ansichtseinstellungen hinzugefügt + + + added property 'Count' + added property 'Count' + Workbench @@ -7118,7 +7123,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7248,7 +7253,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7311,7 +7316,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7322,54 +7327,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Anzahl der Kopien in X-Richtung - + Number of copies in Y direction Anzahl der Kopien in Y-Richtung - + Number of copies in Z direction Anzahl der Kopien in Z-Richtung - + Distance and orientation of intervals in X direction Abstand und Ausrichtung der Intervalle in X-Richtung - + Distance and orientation of intervals in Y direction Abstand und Ausrichtung der Intervalle in Y-Richtung - + Distance and orientation of intervals in Z direction Abstand und Ausrichtung der Intervalle in Z-Richtung - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7378,42 +7383,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 1584ac8478..29b2d49001 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index 958e04b702..d38a6460c6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -3310,19 +3310,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3331,15 +3331,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3368,22 +3368,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4825,8 +4825,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4835,9 +4835,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4854,13 +4854,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4912,7 +4912,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4968,7 +4968,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,6 +5315,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7123,7 +7128,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7253,7 +7258,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7316,7 +7321,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7327,54 +7332,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7383,42 +7388,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm index 4e4d6f7d30..f0e1477996 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm and b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts index 59c91cd754..0670640ca4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts @@ -3310,19 +3310,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3331,15 +3331,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3368,22 +3368,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4825,8 +4825,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4835,9 +4835,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4854,13 +4854,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4912,7 +4912,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4968,7 +4968,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,6 +5315,11 @@ The final angle will be the base angle plus this amount. added missing view properties Propiedades de vista faltantes añadidas + + + added property 'Count' + added property 'Count' + Workbench @@ -7123,7 +7128,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7253,7 +7258,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7316,7 +7321,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7327,54 +7332,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7383,42 +7388,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index f03c93ecb2..0f8240a108 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 3d6ec678c1..bb47becbe7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -3311,19 +3311,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3332,15 +3332,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3369,22 +3369,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4826,8 +4826,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4836,9 +4836,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4855,13 +4855,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4913,7 +4913,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4969,7 +4969,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5316,6 +5316,11 @@ The final angle will be the base angle plus this amount. added missing view properties Propiedades de vista faltantes añadidas + + + added property 'Count' + added property 'Count' + Workbench @@ -7124,7 +7129,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7254,7 +7259,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7317,7 +7322,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7328,54 +7333,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7384,42 +7389,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index cd2181085e..018da3b7c2 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index dbb047e4c7..24385a6fe9 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -3301,19 +3301,19 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'. - + - - + + - + - + @@ -3322,15 +3322,15 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'. - - - - - + + + + + - - + + @@ -3359,22 +3359,22 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Ikusgaitasuna desaktibatuta; zerrendatik kendu da: - + image is Null Irudia nulua da - + filename does not exist on the system or in the resource file Fitxategi-izena ez da existitzen sisteman edo baliabideen fitxategian - + unable to load texture Ezin da testura kargatu - + Does not have 'ViewObject.RootNode'. Ez dauka 'ViewObject.RootNode'. @@ -4816,8 +4816,8 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Mapa modua: - - + + @@ -4826,9 +4826,9 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Okerreko sarrera: zenbaki bat izan behar du. - - - + + + @@ -4845,13 +4845,13 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Okerreko sarrera: bektore bat izan behar du. - + Wrong input: must be a list or tuple of strings, or a single string. Okerreko sarrera: kateen edo tuplen zerrenda bat edo kate bakarra izan behar du. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Okerreko sarrera: 'jatorrizkoa', 'frenet' edo 'tangentea' izan behar du. @@ -4903,7 +4903,7 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. - + Wrong input: must be a placement, a vector, or a rotation. Okerreko sarrera: kokapen bat, bektore bat edo biraketa bat izan behar du. @@ -4959,7 +4959,7 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Okerreko sarrera: bi elementuren zerrenda izan behar du. Adibidez [objektua, 'Ertza1']. - + Wrong input: object has the wrong type. Okerreko sarrera: objektua mota okerrekoa da. @@ -5306,6 +5306,11 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. added missing view properties falta ziren bista-propietateak gehitu dira + + + added property 'Count' + added property 'Count' + Workbench @@ -7115,7 +7120,7 @@ ezarri 'Egia' fusiorako edo 'Faltsua' konposaturako - + Show the individual array elements (only for Link arrays) Erakutsi banakako matrize-elementuak (esteka-matrizeetarako soilik) @@ -7245,7 +7250,7 @@ Gordetako estilo bat erabiltzen denean, bista-propietate batzuk irakurtzeko soil - + The base object that will be duplicated Bikoiztuko den oinarri-objektua @@ -7308,7 +7313,7 @@ Otherwise the copies will have the same orientation as the original Base object. Bestela, kopiek jatorrizko oinarri-objektuaren orientazio bera izango dute. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7319,54 +7324,54 @@ Bestela, kopiek jatorrizko oinarri-objektuaren orientazio bera izango dute. - + Specifies if the copies should be fused together if they touch each other (slower) Kopiek elkar ukitzen badute elkarrekin fusionatuko diren ala ez zehazten du (motelagoa) - + Number of copies in X direction Kopia kopurua X norabidean - + Number of copies in Y direction Kopia kopurua Y norabidean - + Number of copies in Z direction Kopia kopurua Z norabidean - + Distance and orientation of intervals in X direction Tarteen distantzia eta orientazioa X norabidean - + Distance and orientation of intervals in Y direction Tarteen distantzia eta orientazioa Y norabidean - + Distance and orientation of intervals in Z direction Tarteen distantzia eta orientazioa Z norabidean - + The axis direction around which the elements in a polar or a circular array will be created Matrize polar edo zirkular batean elementuak zein ardatz-norabidetan sortuko diren - + Center point for polar and circular arrays. The 'Axis' passes through this point. Matrize polar eta zirkularretarako erdiko puntua. 'Ardatzak' puntu hau zeharkatzen du. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7375,42 +7380,42 @@ Bere kokapena, posizioa eta biraketa matrize polarrak eta zirkularrak sortzean e Utzi propietate hau hutsik 'Ardatza' eta 'Zentroa' eskuz ezarri ahal izateko. - + Number of copies in the polar direction Kopia kopurua norabide polarrean - + Distance and orientation of intervals in 'Axis' direction Tarteen distantzia eta orientazioa ardatzaren norabidean - + Angle to cover with copies Kopiekin estaliko den angelua - + Distance between circular layers Geruza zirkularren arteko distantzia - + Distance between copies in the same circular layer Geruza zirkular bereko kopien arteko distantzia - + Number of circular layers. The 'Base' object counts as one layer. Geruza zirkularren kopurua. 'Oinarria' objektua geruza bat da. - + A parameter that determines how many symmetry planes the circular array will have. Matrize zirkularrak zenbat simetria-plano izango dituen zehazten duen parametroa. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Matrizeko elementu kopuru osoa. diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index c6b61eb5c1..e91bc2bdfc 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index 09ee15ebe1..0a744bc186 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -3314,19 +3314,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3335,15 +3335,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3372,22 +3372,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4829,8 +4829,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4839,9 +4839,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4858,13 +4858,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4916,7 +4916,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4972,7 +4972,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5319,6 +5319,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7127,7 +7132,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7257,7 +7262,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7320,7 +7325,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7331,54 +7336,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7387,42 +7392,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 9f11bae5b6..4e9fa0c6a5 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index d43319726f..08252d09a4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -3308,19 +3308,19 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisissez "Oui". - + - - + + - + - + @@ -3329,15 +3329,15 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisissez "Oui". - - - - - + + + + + - - + + @@ -3366,22 +3366,22 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisissez "Oui". Visibilité désactivée ; retirée de la liste : - + image is Null L'image est nulle - + filename does not exist on the system or in the resource file le nom du fichier n'existe ni dans le système ni dans le fichier de ressource - + unable to load texture impossible de charger la texture - + Does not have 'ViewObject.RootNode'. N'a pas de "ViewObject.RootNode". @@ -4823,8 +4823,8 @@ L'angle final sera l'angle de base plus cette quantité. Mode carte : - - + + @@ -4833,9 +4833,9 @@ L'angle final sera l'angle de base plus cette quantité. Mauvaise entrée : doit être un nombre. - - - + + + @@ -4852,13 +4852,13 @@ L'angle final sera l'angle de base plus cette quantité. Mauvaise entrée : doit être un vecteur. - + Wrong input: must be a list or tuple of strings, or a single string. Mauvaise entrée : doit être une liste ou un uplet de chaînes de caractères, ou une seule chaîne de caractère. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Mauvaise entrée : doit être "Original", "Frenet" ou "Tangent". @@ -4910,7 +4910,7 @@ L'angle final sera l'angle de base plus cette quantité. - + Wrong input: must be a placement, a vector, or a rotation. Mauvaise entrée : doit être un placement, un vecteur ou une rotation. @@ -4966,7 +4966,7 @@ L'angle final sera l'angle de base plus cette quantité. Mauvaise entrée : il faut une liste de deux éléments. Par exemple, [objet, "Edge1"]. - + Wrong input: object has the wrong type. Mauvaise entrée : l'objet a le mauvais type. @@ -5313,6 +5313,11 @@ L'angle final sera l'angle de base plus cette quantité. added missing view properties ajout des propriétés manquantes des vues + + + added property 'Count' + added property 'Count' + Workbench @@ -7117,7 +7122,7 @@ régler à Vrai pour la fusion ou Faux pour un composé - + Show the individual array elements (only for Link arrays) Afficher les éléments isolés du réseau (uniquement pour les réseaux de liens) @@ -7247,7 +7252,7 @@ elles ne seront modifiables qu'en changeant le style à l'aide de l'outil "Édit - + The base object that will be duplicated L'objet de base qui sera dupliqué @@ -7310,7 +7315,7 @@ Otherwise the copies will have the same orientation as the original Base object. Sinon les copies auront la même orientation que l'objet de base d'origine. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7321,54 +7326,54 @@ Sinon les copies auront la même orientation que l'objet de base d'origine. - + Specifies if the copies should be fused together if they touch each other (slower) Spécifie si les copies doivent être fusionnées si elles se touchent (plus lent) - + Number of copies in X direction Nombre de copies dans la direction X - + Number of copies in Y direction Nombre de copies dans la direction Y - + Number of copies in Z direction Nombre de copies dans la direction Z - + Distance and orientation of intervals in X direction Distance et orientation des intervalles dans la direction X - + Distance and orientation of intervals in Y direction Distance et orientation des intervalles dans la direction Y - + Distance and orientation of intervals in Z direction Distance et orientation des intervalles dans la direction Z - + The axis direction around which the elements in a polar or a circular array will be created La direction de l'axe autour duquel les éléments d'un réseau polaire ou circulaire seront créés - + Center point for polar and circular arrays. The 'Axis' passes through this point. Point central pour les réseaux polaires et circulaires. L'"axe" passe par ce point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7377,42 +7382,42 @@ Son placement, sa position et sa rotation seront utilisés lors de la création Laisser cette propriété vide pour pouvoir définir l'"axe" et le "centre" manuellement. - + Number of copies in the polar direction Nombre de copies dans la direction polaire - + Distance and orientation of intervals in 'Axis' direction Distance et orientation des intervalles dans la direction des "axes" - + Angle to cover with copies Angle à couvrir avec les copies - + Distance between circular layers Distance entre les couches circulaires - + Distance between copies in the same circular layer Distance entre les copies dans la même couche circulaire - + Number of circular layers. The 'Base' object counts as one layer. Nombre de couches circulaires. L'objet de "base" compte comme une couche. - + A parameter that determines how many symmetry planes the circular array will have. Un paramètre qui détermine le nombre de plans de symétrie que le réseau circulaire aura. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Nombre total d'éléments dans le réseau. diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index 6aa0ff149b..6f94c921b3 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index 69ae35e277..2ffddf341c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -3314,19 +3314,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3335,15 +3335,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3372,22 +3372,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4829,8 +4829,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4839,9 +4839,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4858,13 +4858,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4916,7 +4916,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4972,7 +4972,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5319,6 +5319,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7127,7 +7132,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7257,7 +7262,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7320,7 +7325,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7331,54 +7336,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7387,42 +7392,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index 3cad4b66ec..219dc01905 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 39f8d02383..b8d60b0726 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -3380,19 +3380,19 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes). - + - - + + - + - + @@ -3401,15 +3401,15 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes). - - - - - + + + + + - - + + @@ -3438,22 +3438,22 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Vidljivost isključena; uklonjeno s popisa: - + image is Null slika je Ništavna - + filename does not exist on the system or in the resource file naziv datoteke ne postoji na sustavu ili u datoteci resursa - + unable to load texture nije moguće učitati teksturu - + Does not have 'ViewObject.RootNode'. Nema 'ViewObject.RootNode'. @@ -4900,8 +4900,8 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Način Karte: - - + + @@ -4910,9 +4910,9 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Pogrešan unos: mora bit broj. - - - + + + @@ -4929,13 +4929,13 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Pogrešan unos: mora biti vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Pogrešan unos: mora biti popis ili niz riječi ili jedna riječ. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Pogrešan unos: mora biti "Original", "Frenet" ili "Tangencial". @@ -4987,7 +4987,7 @@ Konačni kut bit će osnovni kut plus ovaj iznos. - + Wrong input: must be a placement, a vector, or a rotation. Pogrešan unos: mora biti položaj, vektor ili rotacija. @@ -5045,7 +5045,7 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Pogrešan unos: mora biti popis od dva elementa. Na primjer, [objekt, 'Rub1']. - + Wrong input: object has the wrong type. Pogrešan unos: objekt ima pogrešan tip. @@ -5393,6 +5393,11 @@ Konačni kut bit će osnovni kut plus ovaj iznos. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7212,7 +7217,7 @@ označi Točno za spajanje ili Netočno za složeni spoj - + Show the individual array elements (only for Link arrays) Prikaži pojedinačne elemente niza (samo za vezane nizove) @@ -7345,7 +7350,7 @@ ona će se moći mijenjati samo promjenom stila pomoću 'Urednika za Anotacijske - + The base object that will be duplicated Osnovni objekt koji će biti dupliciran @@ -7408,7 +7413,7 @@ Otherwise the copies will have the same orientation as the original Base object. Inače kopije će imati istu orijetaciju kao i originalni Osnovni objekt. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7419,54 +7424,54 @@ Inače kopije će imati istu orijetaciju kao i originalni Osnovni objekt. - + Specifies if the copies should be fused together if they touch each other (slower) Određuje dali kopije trebaju srasti ako se dodiruju (sporije) - + Number of copies in X direction Broj kopija u X smjeru - + Number of copies in Y direction Broj kopija u Y smjeru - + Number of copies in Z direction Broj kopija u Z smjeru - + Distance and orientation of intervals in X direction Razmak i orijentacija intervala u X smjeru - + Distance and orientation of intervals in Y direction Razmak i orijentacija intervala u Y smjeru - + Distance and orientation of intervals in Z direction Razmak i orijentacija intervala u Z smjeru - + The axis direction around which the elements in a polar or a circular array will be created Smjer osi oko koje će se izraditi elementi kod polarnog ili kružnog niza - + Center point for polar and circular arrays. The 'Axis' passes through this point. Centralna točka polarnog ili kružnog niza. 'Os' prolazi kroz tu točku. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7475,42 +7480,42 @@ Njegovo postavljanje, pozicija i orijentacija če se koristiti kada se kreiraju Ostavite ovo svojstvo prazno kako bi ste mogli postaviti 'Os' i 'Centar' ručno. - + Number of copies in the polar direction Broj kopija u polarnom smjeru - + Distance and orientation of intervals in 'Axis' direction Razmak i orijentacija intervala u smjeru Osi - + Angle to cover with copies Kut za pokrivanje sa kopijama - + Distance between circular layers Udaljenost između kružnih slojeva - + Distance between copies in the same circular layer Udaljenost između kopija u istom kružnom sloju - + Number of circular layers. The 'Base' object counts as one layer. Broj kružnih slojeva. Osnovni objekt se broji kao jedan sloj. - + A parameter that determines how many symmetry planes the circular array will have. Parametar koji određuje koliko će ravnina simetrije imati kružni niz. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Ukupan broj elemenata u nizu. diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index 5adb8782b1..d353174ebd 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 4cb43783e4..e41e3addd0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -2979,7 +2979,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Height of text - Height of text + Szöveg magassága @@ -3033,7 +3033,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Toggle construction mode - Toggle construction mode + Építési mód váltása @@ -3317,19 +3317,19 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. - + - - + + - + - + @@ -3338,15 +3338,15 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. - - - - - + + + + + - - + + @@ -3375,22 +3375,22 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Láthatóság kikapcsolva; eltávolítva a listáról: - + image is Null a kép üres - + filename does not exist on the system or in the resource file a fájlnév nem létezik a rendszeren vagy a forrásfájlban - + unable to load texture anyagminta betöltése sikertelen - + Does not have 'ViewObject.RootNode'. Nincs 'ViewObject.RootNode'. @@ -3505,7 +3505,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Path array - Path array + Útvonal elrendezés @@ -3714,12 +3714,12 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Arc by 3 points - Arc by 3 points + Körív 3 pontból Toggle grid - Toggle grid + Rács kapcsolása @@ -3797,25 +3797,25 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Pick rotation center - Pick rotation center + Válasszon ki elforgatás középpontot Base angle - Base angle + Alapszög The base angle you wish to start the rotation from - The base angle you wish to start the rotation from + Az alapszög, amelyből a forgatás elkezdődik Pick base angle - Pick base angle + Alap szög kiválasztása @@ -3828,39 +3828,39 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. - The amount of rotation you wish to perform. -The final angle will be the base angle plus this amount. + A végrehajtani kívánt forgatási mennyiség. +A végső szög lesz az alapszög plusz ennek összege. Pick rotation angle - Pick rotation angle + Válasszon ki elforgatási szöget Add to group - Add to group + Hozzáadás a csoporthoz Ungroup - Ungroup + Csoportbontás Add new group - Add new group + Új csoport hozzáadása Select group - Select group + Válassza ki a csoportot No new selection. You must select non-empty groups or objects inside groups. - No new selection. You must select non-empty groups or objects inside groups. + Nincs új választás. A csoportokon belül nem üres csoportokat vagy tárgyakat kell kijelölnie. @@ -3870,27 +3870,27 @@ The final angle will be the base angle plus this amount. Add new Layer - Add new Layer + Új réteg hozzáadása Add to construction group - Add to construction group + Hozzáadás az építési csoporthoz Add a new group with a given name - Add a new group with a given name + Adjon hozzá egy új csoportot egy adott névvel Add group - Add group + Csoport hozzáadása Group name - Group name + Csoportnév @@ -3900,57 +3900,57 @@ The final angle will be the base angle plus this amount. Flip dimension - Flip dimension + Méretek megfordítása Sketch is too complex to edit: it is suggested to use sketcher default editor - Sketch is too complex to edit: it is suggested to use sketcher default editor + Vázlatot túl bonyolult szerkeszteni: azt javasoljuk, hogy használja vázlatkészítő alapértelmezett szerkesztőt Fillet radius - Fillet radius + Lekerekítés sugara Radius of fillet - Radius of fillet + Lekerekítés sugara Enter radius. - Enter radius. + Sugár megadása. Delete original objects: - Delete original objects: + Eredeti tárgyak törlése: Chamfer mode: - Chamfer mode: + Letörés mód: Two elements needed. - Two elements needed. + Két elem szükséges. Test object - Test object + Teszt tárgy Test object removed - Test object removed + Teszt tárgy eltávolítva Fillet cannot be created - Fillet cannot be created + Nem hozható létre lekerekítés @@ -3960,70 +3960,70 @@ The final angle will be the base angle plus this amount. Create Polygon (Part) - Create Polygon (Part) + Sokszög létrehozása (alkatrész) Create Polygon - Create Polygon + Sokszög létrehozása Click anywhere on a line to split it. - Click anywhere on a line to split it. + Kattintson bárhol egy vonalon, annak felosztásához. Split line - Split line + Vonal felosztása Select objects to trim or extend - Select objects to trim or extend + Válassza ki a tárgyakat a vágáshoz/nyújtáshoz Pick distance - Pick distance + Távolság kiválasztása Offset angle - Offset angle + Eltolási szög Unable to trim these objects, only Draft wires and arcs are supported. - Unable to trim these objects, only Draft wires and arcs are supported. + Nem lehet vágni a tárgyakat, csak tervrajz vonalak és ívek támogatottak. Unable to trim these objects, too many wires - Unable to trim these objects, too many wires + Nem lehet ezeket a tárgyakat vágni, túl sok drótváz These objects don't intersect. - These objects don't intersect. + Ezek a tárgyak nem metszik egymást. Too many intersection points. - Too many intersection points. + Túl sok metszési pont. Spline has been closed - Spline has been closed + Görbe lezárva Last point has been removed - Last point has been removed + Utolsó pont eltávolítva @@ -4033,30 +4033,30 @@ The final angle will be the base angle plus this amount. Change Style - Change Style + Stílus váltás This object does not support possible coincident points, please try again. - This object does not support possible coincident points, please try again. + Ez a tárgy nem támogatja a lehetséges véletlen pontokat, próbálkozzon újra. Delete point - Delete point + Pont törlése Add point - Add point + Pont hozzáadása Open wire - Open wire + Nyitott törött vonal @@ -4066,43 +4066,43 @@ The final angle will be the base angle plus this amount. Reverse wire - Reverse wire + Fordított drótváz Active object must have more than two points/nodes - Active object must have more than two points/nodes + Aktív tárgynak kettőnél több pontot/csomópontot kell tartalmaznia Open spline - Open spline + Nyitott spirál Close spline - Close spline + Zárt spirál Reverse spline - Reverse spline + Fordított spirál Move arc - Move arc + Ív mozgatása Set first angle - Set first angle + Első szög beállítása Set last angle - Set last angle + Utolsó szög beállítása @@ -4739,7 +4739,7 @@ The final angle will be the base angle plus this amount. length: - length: + hossz: @@ -4832,8 +4832,8 @@ The final angle will be the base angle plus this amount. Térkép mód: - - + + @@ -4842,9 +4842,9 @@ The final angle will be the base angle plus this amount. Rossz bemenet: számnak kell lennie. - - - + + + @@ -4861,13 +4861,13 @@ The final angle will be the base angle plus this amount. Rossz bemenet: vektornak kell lennie. - + Wrong input: must be a list or tuple of strings, or a single string. Helytelen bemenet: karakter rekord listának vagy egyetlen karakternek kell lennie. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Hibás bemenet: 'Eredeti', 'Frenet' vagy 'Érintő' kell, hogy legyen. @@ -4919,7 +4919,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Helytelen bemenet: elhelyezésnek, vektornak vagy forgatásnak kell lennie. @@ -4975,7 +4975,7 @@ The final angle will be the base angle plus this amount. Helytelen bemenet: két elemből kell állnia. Például [tárgy, 'Él1']. - + Wrong input: object has the wrong type. Helytelen bemenet: a tárgy rossz típusú. @@ -5057,17 +5057,17 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number or quantity. - Wrong input: must be a number or quantity. + Hibás bemenet: számnak vagy mennyiségnek kell lennie. Layers - Layers + Rétegek Wrong input: it must be a string. - Wrong input: it must be a string. + Helytelen bemenet: karakterláncnak kell lennie. @@ -5075,50 +5075,50 @@ The final angle will be the base angle plus this amount. Wrong input: must be a tuple of three floats 0.0 to 1.0. - Wrong input: must be a tuple of three floats 0.0 to 1.0. + Helytelen bemenet: három lebegőpontos számnak kell lennie 0,0 és 1,0 között. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. - Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. + Helytelen bemenet: 'Szabványos', 'Szaggatott', 'Pontozott' vagy 'Pontozott vonal' kell, hogy legyen. Wrong input: must be a number between 0 and 100. - Wrong input: must be a number between 0 and 100. + Hibás bemenet: 0 és 100 közötti számnak kell lennie. Activate this layer - Activate this layer + Ennek a rétegnek az aktiválása Select layer contents - Select layer contents + Réteg tartalom kijelölése Merge layer duplicates - Merge layer duplicates + Megsokszorozott rétegek egyesítése Add new layer - Add new layer + Új réteg hozzáadása Relabeling layer: - Relabeling layer: + A réteg újracímkézése: Merging layer: - Merging layer: + Réteg összeolvasztás: @@ -5131,164 +5131,164 @@ The final angle will be the base angle plus this amount. Flatten - Flatten + Laposítás Upgrade: Unknown force method: - Upgrade: Unknown force method: + Frissítés: Ismeretlen eröltető módszer: Found 1 block: exploding it - Found 1 block: exploding it + Talált 1 blokkot: szétrobbantom Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Találtam 1 összetett multi-szilárd testet: robbantom Found 1 parametric object: breaking its dependencies - Found 1 parametric object: breaking its dependencies + Talált 1 parametrikus tárgyat: függőségeket felosztja Found 2 objects: subtracting them - Found 2 objects: subtracting them + Két tárgyat talált: kivonja egymásból Found several faces: splitting them - Found several faces: splitting them + Több felület talált: felosztja Found several objects: subtracting them from the first one - Found several objects: subtracting them from the first one + Több tárgyat talált: kivonja az elsőből Found 1 face: extracting its wires - Found 1 face: extracting its wires + Talált 1 felületet: drótvázzá bontja Found only wires: extracting their edges - Found only wires: extracting their edges + Csak vonalak találhatók: éleiket kibontja No more downgrade possible - No more downgrade possible + Nem lehet több visszaminősítést végezni No object given - No object given + Nincs megadva tárgy The two points are coincident - The two points are coincident + A két pont egybeesik mirrored - mirrored + tükrözött Object must be a closed shape - Object must be a closed shape + A tárgynak zárt alakzatnak kell lennie No solid object created - No solid object created + Nem szilárd test tárgy Faces must be coplanar to be refined - Faces must be coplanar to be refined + A területeket finomítani kell Found groups: closing each open object inside - Found groups: closing each open object inside + Csoportokat talált: minden belső nyitott tárgy bezárása Found meshes: turning into Part shapes - Found meshes: turning into Part shapes + Háló(ka)t találtam: Alkatrészekké alakít Found 1 solidifiable object: solidifying it - Found 1 solidifiable object: solidifying it + Egy kialakítható tárgy található: megszilárdítjuk, felületet képzünk Found 2 objects: fusing them - Found 2 objects: fusing them + 2 tárgy található: egybeolvaszt Found object with several coplanar faces: refine them - Found object with several coplanar faces: refine them + Több csatlakozott felülettel rendelkező tárgyat talált: finomítja ezeket Found 1 non-parametric objects: draftifying it - Found 1 non-parametric objects: draftifying it + Találtunk 1 nem parametrikus tárgyat: tervrajzzá alakít Found 1 closed sketch object: creating a face from it - Found 1 closed sketch object: creating a face from it + 1 zárt vázlat tárgyat talált: létrehoz belőle egy felületet Found closed wires: creating faces - Found closed wires: creating faces + Zárt drótvázat talált: létrehoz felületeket Found several wires or edges: wiring them - Found several wires or edges: wiring them + Több élt vagy szakaszt talált: összeköti őket Found several non-treatable objects: creating compound - Found several non-treatable objects: creating compound + Találtam több nem kezelhető tárgyat: kapcsolat létrehozása trying: closing it - trying: closing it + próbálja: bezárni Found 1 open wire: closing it - Found 1 open wire: closing it + 1 nyílt szakaszt talált: bezárja Found 1 object: draftifying it - Found 1 object: draftifying it + Talált 1 tárgyat: tervrajzzá alakít Found points: creating compound - Found points: creating compound + Pontokat talált: kapcsolat létrehozása Unable to upgrade these objects. - Unable to upgrade these objects. + Nem lehet frissíteni ezeket a tárgyakat. @@ -5298,7 +5298,7 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - added view property 'TextColor' + nézet tulajdonság hozzáadva 'SzövegSzín' @@ -5322,18 +5322,23 @@ The final angle will be the base angle plus this amount. added missing view properties hiányzó nézeti tulajdonságok hozzáadása + + + added property 'Count' + added property 'Count' + Workbench Draft creation tools - Draft creation tools + Tervrajzkészítő eszközök Draft annotation tools - Draft annotation tools + Tervrajz megjegyzési eszközök @@ -5548,7 +5553,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Writing camera position - Writing camera position + Kamera helyzet írása @@ -5588,7 +5593,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből The preferred unit you are currently working with. - The preferred unit you are currently working with. + Kedvelt egység, amellyel jelenleg dolgozik. @@ -5596,7 +5601,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből OCA error: couldn't determine character encoding - OCA error: couldn't determine character encoding + OCA hiba: nem sikerült meghatározni a karakterkódolást @@ -5650,7 +5655,7 @@ You may also select a three vertices or a Working Plane Proxy. Path array - Path array + Útvonal elrendezés @@ -5995,7 +6000,7 @@ However, a single sketch with disconnected traces will be converted into several Shows the snap toolbar if it is hidden. - Shows the snap toolbar if it is hidden. + Az illesztési eszköztár megjelenítése, ha rejtett. @@ -6010,9 +6015,9 @@ However, a single sketch with disconnected traces will be converted into several Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. - Moves the selected objects from one base point to another point. -If the "copy" option is active, it will create displaced copies. -CTRL to snap, SHIFT to constrain. + A kijelölt tárgyak mozgatása egyik bázispontról a másikra. +Ha a "másolás" beállítás aktív, akkor elmozdult másolatokat hoz létre. +CTRL illesztéshez, SHIFT a kényszerítéshez. @@ -6026,8 +6031,8 @@ CTRL to snap, SHIFT to constrain. Creates a circular arc by a center point and a radius. CTRL to snap, SHIFT to constrain. - Creates a circular arc by a center point and a radius. -CTRL to snap, SHIFT to constrain. + Ívet hoz létre középponttal és sugárral. +CTRL az illesztéshez, SHIFT a kényszerítéshez. @@ -6035,14 +6040,14 @@ CTRL to snap, SHIFT to constrain. Arc by 3 points - Arc by 3 points + Körív 3 pontból Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. - Creates a circular arc by picking 3 points. -CTRL to snap, SHIFT to constrain. + Körkörös ívet hoz létre 3 pont kiválasztásával. +CTRL illesztéshez, a SHIFT a kényszerítéshez. @@ -6055,7 +6060,7 @@ CTRL to snap, SHIFT to constrain. Create various types of circular arcs. - Create various types of circular arcs. + Hozzon létre különböző típusú köríveket. @@ -6063,12 +6068,12 @@ CTRL to snap, SHIFT to constrain. Toggle grid - Toggle grid + Rács kapcsolása Toggles the Draft grid on and off. - Toggles the Draft grid on and off. + Tervrajz rácsának be- és kikapcsolása. @@ -6076,12 +6081,12 @@ CTRL to snap, SHIFT to constrain. Subelement highlight - Subelement highlight + Alelem kiemelése Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. - Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. + Jelölje ki a kijelölt tárgyak alelemeit, hogy azokat áthelyezze, elforgassa és méretezési eszközökkel szerkessze. @@ -6096,9 +6101,9 @@ CTRL to snap, SHIFT to constrain. Edits the active object. Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - Edits the active object. -Press E or ALT+LeftClick to display context menu -on supported nodes and on supported objects. + Az aktív tárgy szerkesztése. +A helyi menü megjelenítéséhez nyomja le az E vagy az ALT+LeftClick billentyűkombinációt +támogatott csomópontokon és támogatott tárgyakon. @@ -6106,12 +6111,12 @@ on supported nodes and on supported objects. Add point - Add point + Pont hozzáadása Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. + Pontot ad egy meglévő vonalhoz vagy B-görbéhez. @@ -6119,12 +6124,12 @@ on supported nodes and on supported objects. Remove point - Remove point + Pont eltávolítása Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. + Eltávolít egy pontot egy meglévő vonalból vagy B-görbéből. @@ -6140,10 +6145,10 @@ on supported nodes and on supported objects. creating various circular layers. The array can be turned into an orthogonal or a polar array by changing its type. - Creates copies of the selected object, and places the copies in a radial pattern -creating various circular layers. + Másolatot készít a kijelölt tárgyról, és a másolatokat sugárirányú mintába helyezi +és különböző körkörös rétegeket hoz létre. -The array can be turned into an orthogonal or a polar array by changing its type. +Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megváltoztatásával. @@ -6151,12 +6156,12 @@ The array can be turned into an orthogonal or a polar array by changing its type Annotation styles... - Annotation styles... + Jegyzetstílusok... Manage or create annotation styles - Manage or create annotation styles + Jegyzetstílusok kezelése vagy létrehozása @@ -6171,9 +6176,9 @@ The array can be turned into an orthogonal or a polar array by changing its type Creates a 2D projection on a Drawing Workbench page from the selected objects. This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17. Use TechDraw Workbench instead for generating technical drawings. - Creates a 2D projection on a Drawing Workbench page from the selected objects. -This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17. -Use TechDraw Workbench instead for generating technical drawings. + 2D vetítést hoz létre a rajz munkafelületén lévő kijelölt tárgyakról. +Ez a parancs ELAVULT, mert a rajz munkafelület 0,17 óta elavult. +Ehelyett a MűszakiRajz munkafelület segítségével hozzon létre műszaki rajzokat. @@ -6186,7 +6191,7 @@ Use TechDraw Workbench instead for generating technical drawings. Creates a point object. Click anywhere on the 3D view. - Creates a point object. Click anywhere on the 3D view. + Pont tárgyat hoz létre. Kattintson bárhová a 3D nézetben. @@ -6201,9 +6206,9 @@ Use TechDraw Workbench instead for generating technical drawings. Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. If the "copy" option is active, it will create rotated copies. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. - Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. -If the "copy" option is active, it will create rotated copies. -CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. + Elforgatja a kijelölt tárgyakat. Válassza ki az elforgatás közepét, majd a kezdeti szöget, majd a végső szöget. +Ha a "másolás" beállítás aktív, akkor elforgatott másolatokat hoz létre. +CTRL illeszt, SHIFT a kényszerít. Tartsa az ALT billentyűt, és kattintson ide, ha minden kattintással másolatot szeretne létrehozni. @@ -6211,14 +6216,14 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each Move to group... - Move to group... + Áthelyezés csoportba... Moves the selected objects to an existing group, or removes them from any group. Create a group first to use this tool. - Moves the selected objects to an existing group, or removes them from any group. -Create a group first to use this tool. + Áthelyezi a kijelölt tárgyakat egy meglévő csoportba, vagy eltávolítja őket az egyes csoportból. +Először hozzon létre egy csoportot az eszköz használatára. @@ -6226,12 +6231,12 @@ Create a group first to use this tool. Select group - Select group + Válassza ki a csoportot Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. - Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. + Kijelöli a kijelölt csoportok tartalmát. Kijelölt nem csoport tárgyak esetében a csoport tartalma van kiválasztva. @@ -6244,7 +6249,7 @@ Create a group first to use this tool. Select a group to add all Draft and Arch objects to. - Select a group to add all Draft and Arch objects to. + Jelöljön ki egy csoportot, amelyhez az összes tervrajz- és íves tárgyakat hozzá szeretné adni. @@ -6252,16 +6257,16 @@ Create a group first to use this tool. Add to Construction group - Add to Construction group + Hozzáadás az építési csoporthoz Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. - Adds the selected objects to the construction group, -and changes their appearance to the construction style. -It creates a construction group if it doesn't exist. + A kijelölt tárgyak hozzáadása az építési csoporthoz +és megváltoztatják megjelenésüket az építési stílusra. +Építési csoport jön létre, ha nem létezik. @@ -6269,12 +6274,12 @@ It creates a construction group if it doesn't exist. Add a new named group - Add a new named group + Új elnevezett csoport hozzáadása Add a new group with a given name. - Add a new group with a given name. + Adjon hozzá egy új csoportot egy megadott névvel. @@ -6282,16 +6287,16 @@ It creates a construction group if it doesn't exist. Create working plane proxy - Create working plane proxy + Munkasík proxy létrehozása Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. + Proxy tárgyat hoz létre az aktuális munkasíkból. +A tárgy létrehozása után kattintson rá duplán a fa nézetben a kamera helyzetének és a tárgy láthatóságának visszaállításához. +Ezután használhatja különböző kamera helyzetek mentéséhez és a tárgyakat állapotát bármikor, amikor akarja. @@ -6299,12 +6304,12 @@ Then you can use it to save a different camera position and objects' states any Wire to B-spline - Wire to B-spline + Drótháló a B-görbéhez Converts a selected polyline to a B-spline, or a B-spline to a polyline. - Converts a selected polyline to a B-spline, or a B-spline to a polyline. + A kijelölt vonalláncot B-görbévé vagy egy B-görbét vonallánccá alakítja. @@ -6312,14 +6317,14 @@ Then you can use it to save a different camera position and objects' states any Flip dimension - Flip dimension + Méretek megfordítása Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. - Flip the normal direction of the selected dimensions (linear, radial, angular). -If other objects are selected they are ignored. + Fordítsa meg a kijelölt méretek normál irányát (egyenes, sugár, szög). +Ha más tárgyak vannak kijelölve, a program figyelmen kívül hagyja őket. @@ -6332,7 +6337,7 @@ If other objects are selected they are ignored. Creates a fillet between two selected wires or edges. - Creates a fillet between two selected wires or edges. + Lekerekítést hoz létre két kijelölt vonal vagy él között. @@ -6340,12 +6345,12 @@ If other objects are selected they are ignored. Set style - Set style + Stílus beállítása Sets default styles - Sets default styles + Alapértelmezett stílusok beállítása @@ -6359,8 +6364,8 @@ If other objects are selected they are ignored. Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. CTRL to snap, SHIFT to constrain - Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. -CTRL to snap, SHIFT to constrain + Egyszerű sokszöget (háromszög, négyzet, ötszög, ...) hoz létre az oldalak számának és a körülírt sugárnak a meghatározásával. +CTRL illesztéshez, SHIFT a kényszerítéshez @@ -6375,9 +6380,9 @@ CTRL to snap, SHIFT to constrain Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. - Splits the selected line or polyline into two independent lines -or polylines by clicking anywhere along the original object. -It works best when choosing a point on a straight segment and not a corner vertex. + A kijelölt vonal vagy vonallánc felosztása két független vonalra +vagy vonalláncok kattintva bárhol az eredeti tárgy mentén. +Ez akkor működik a legjobban, ha egy pontot választ egy egyenes szakaszában, és nem sarok csúcspontot. @@ -6391,8 +6396,8 @@ It works best when choosing a point on a straight segment and not a corner verte Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. - Trims or extends the selected object, or extrudes single faces. -CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. + Levágja vagy bővíti a kijelölt tárgyat, vagy egyetlen felületet bővít. +CTRL illesztéshez, SHIFT-el kényszeríti az aktuális szakaszhoz vagy normális állapothoz, ALT megfordítja. @@ -6405,7 +6410,7 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. - Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. + Többpontos B-görbét hoz létre. CTRL igazításhoz, SHIFT a kényszerítéshez. @@ -6413,12 +6418,12 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Apply current style - Apply current style + Aktuális stílus alkalmazása Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. - Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. + Az eszköztáron definiált stílust (vonalszélességet és színeket) alkalmazza a kijelölt tárgyakra és csoportokra. @@ -6426,14 +6431,14 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Bézier curve - Bézier curve + Bézier-görbe Creates an N-degree Bézier curve. The more points you pick, the higher the degree. CTRL to snap, SHIFT to constrain. - Creates an N-degree Bézier curve. The more points you pick, the higher the degree. -CTRL to snap, SHIFT to constrain. + N-fokos Bézier görbét hoz létre. Minél több pontot választasz, annál magasabb a fok. +CTRL illesztéshez, SHIFT a kényszerítéshez. @@ -6441,16 +6446,16 @@ CTRL to snap, SHIFT to constrain. Cubic Bézier curve - Cubic Bézier curve + Köbös bezier görbe Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. - Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. -After the curve is created you can go back to edit each control point and set the properties of each knot. -CTRL to snap, SHIFT to constrain. + Bezier görbét hoz létre a 2. fokon (másodfokú) és 3. fokon (harmadfokú) szakaszokkal. Kattintson és húzza a billentyűt az egyes szakaszok meghatározásához. +A görbe létrehozása után visszamehet, és szerkesztheti az egyes vezérlőpontokat, és beállíthatja az egyes csomópontok tulajdonságait. +CTRL igazításhoz, SHIFT a kényszerítéshez. @@ -6463,7 +6468,7 @@ CTRL to snap, SHIFT to constrain. Create various types of Bézier curves. - Create various types of Bézier curves. + Hozzon létre különböző típusú Bazier görbéket. @@ -6477,8 +6482,8 @@ CTRL to snap, SHIFT to constrain. Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. - Creates a circle (full circular arc). -CTRL to snap, ALT to select tangent objects. + Létrehoz egy kört (teljes körív). +CTRL igazításához, ALT billentyűkombinációval jelölhet ki érintő tárgyakat. @@ -6491,7 +6496,7 @@ CTRL to snap, ALT to select tangent objects. Creates an ellipse. CTRL to snap. - Creates an ellipse. CTRL to snap. + Ellipszis létrehozása. CTRL az illesztéshez. @@ -6504,7 +6509,7 @@ CTRL to snap, ALT to select tangent objects. Creates a facebinder object from selected faces. - Creates a facebinder object from selected faces. + Összesített felületű tárgyat képez a kiválasztott felületekből. @@ -6520,10 +6525,10 @@ CTRL to snap, ALT to select tangent objects. meaning the copies follow the specified direction in the X, Y, Z axes. The array can be turned into a polar or a circular array by changing its type. - Creates copies of the selected object, and places the copies in an orthogonal pattern, -meaning the copies follow the specified direction in the X, Y, Z axes. + Másolatot készít a kijelölt tárgyról, és a másolatokat merőleges mintába helyezi. +Ez azt jelenti, hogy a másolatok az X-Y, Z tengelyek megadott irányát követik. -The array can be turned into a polar or a circular array by changing its type. +Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megváltoztatásával. @@ -6537,8 +6542,8 @@ The array can be turned into a polar or a circular array by changing its type. Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy. - Scales the selected objects from a base point. -CTRL to snap, SHIFT to constrain, ALT to copy. + A kijelölt tárgyakat az alappontból méretezi. +CTRL illesztéshez, SHIFT a kényszerítéshez, ALT másoláshoz. @@ -6604,7 +6609,7 @@ A 'Point link array' is more efficient when handling many copies. Toggle construction mode - Toggle construction mode + Építési mód váltása @@ -6978,7 +6983,7 @@ It is a list of strings; each element in the list will be displayed in its own l Height of text - Height of text + Szöveg magassága @@ -7080,57 +7085,57 @@ set True for fusion or False for compound Number of faces - Number of faces + Felületek száma Radius of the control circle - Radius of the control circle + Vezérlő kör sugara How the polygon must be drawn from the control circle - How the polygon must be drawn from the control circle + Hogyan kell a sokszöget rajzolni a vezérlő körről Radius to use to fillet the corners - Radius to use to fillet the corners + Sarkok lekerekítéséhez használt rádiusz Size of the chamfer to give to the corners - Size of the chamfer to give to the corners + Sarkokhoz használt letörés mérete The base object that will be duplicated. - The base object that will be duplicated. + A másolandó alap tárgy. The object along which the copies will be distributed. It must contain 'Edges'. - The object along which the copies will be distributed. It must contain 'Edges'. + A tárgy, ami körül a másolatokat elosztják. Tartalmaznia kell 'Éleket'. Number of copies to create. - Number of copies to create. + A létrehozni kívánt másolatok száma. Rotation factor of the twisted array. - Rotation factor of the twisted array. + A csavart tömb forgatási tényezője. - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7260,7 +7265,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7323,7 +7328,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7334,54 +7339,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7390,42 +7395,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. @@ -7566,7 +7571,7 @@ This property is read-only, as the number depends on the points in 'Point Object The placement of this object - The placement of this object + Ennek az tárgynak az elhelyezése @@ -7820,7 +7825,7 @@ the 'First Angle' and 'Last Angle' properties. The linked object - The linked object + A kapcsolt tárgy @@ -7835,7 +7840,7 @@ the 'First Angle' and 'Last Angle' properties. The size of the texts inside this object - The size of the texts inside this object + A szöveg vastagsága ebben az tárgyban @@ -7860,7 +7865,7 @@ the 'First Angle' and 'Last Angle' properties. If checked, source objects are displayed regardless of being visible in the 3D model - If checked, source objects are displayed regardless of being visible in the 3D model + Ha be van jelölve, a forrástárgyak megjelennek függetlenül attól, hogy látható legyen, a 3D-s modellben @@ -8086,7 +8091,7 @@ Write '$dim' so that it is replaced by the dimension length. Show the unit suffix - Show the unit suffix + Mértékegység utótag megjelenítése diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index cc856ebd7e..0d5679113c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index cc5f1d8660..9b358e7186 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -3311,19 +3311,19 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. - + - - + + - + - + @@ -3332,15 +3332,15 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. - - - - - + + + + + - - + + @@ -3369,22 +3369,22 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Visibilità disattivata; rimosso dall'elenco: - + image is Null l'immagine è Null - + filename does not exist on the system or in the resource file il nome file non esiste nel sistema o nei file risorsa - + unable to load texture impossibile caricare la texture - + Does not have 'ViewObject.RootNode'. Non ha 'ViewObject.RootNode'. @@ -4826,8 +4826,8 @@ L'angolo finale sarà l'angolo base più questa quantità. Map mode: - - + + @@ -4836,9 +4836,9 @@ L'angolo finale sarà l'angolo base più questa quantità. Input errato: deve essere un numero. - - - + + + @@ -4855,13 +4855,13 @@ L'angolo finale sarà l'angolo base più questa quantità. Ingresso errato: deve essere un vettore. - + Wrong input: must be a list or tuple of strings, or a single string. Input errato: deve essere una lista o tupla di stringhe, o una singola stringa. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Input errato: deve essere 'Original', 'Frenet' o 'Tangent'. @@ -4913,7 +4913,7 @@ L'angolo finale sarà l'angolo base più questa quantità. - + Wrong input: must be a placement, a vector, or a rotation. Input errato: deve essere un posizionamento, un vettore o una rotazione. @@ -4969,7 +4969,7 @@ L'angolo finale sarà l'angolo base più questa quantità. Input errato: deve essere un elenco di due elementi. Per esempio, [object, 'Edge1']. - + Wrong input: object has the wrong type. Input errato: l'oggetto ha il tipo sbagliato. @@ -5316,6 +5316,11 @@ L'angolo finale sarà l'angolo base più questa quantità. added missing view properties aggiunte proprietà di visualizzazione mancanti + + + added property 'Count' + added property 'Count' + Workbench @@ -7121,7 +7126,7 @@ imposta 'Vero' se il risultato è una fusione o 'Falso' se è un composto - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7251,7 +7256,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated L'oggetto base che verrà duplicato @@ -7314,7 +7319,7 @@ Otherwise the copies will have the same orientation as the original Base object. Altrimenti le copie avranno lo stesso orientamento dell'oggetto Base originale. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7325,54 +7330,54 @@ Altrimenti le copie avranno lo stesso orientamento dell'oggetto Base originale.< - Circolare: posiziona le copie in livelli circolari concentrici attorno all'oggetto base. - + Specifies if the copies should be fused together if they touch each other (slower) Specifica se le copie devono essere fuse insieme se si toccano a vicenda (più lento) - + Number of copies in X direction Numero di copie nella direzione X - + Number of copies in Y direction Numero di copie nella direzione Y - + Number of copies in Z direction Numero di copie nella direzione Z - + Distance and orientation of intervals in X direction Distanza e orientamento degli intervalli in direzione X - + Distance and orientation of intervals in Y direction Distanza e orientamento degli intervalli in direzione Y - + Distance and orientation of intervals in Z direction Distanza e orientamento degli intervalli in direzione Z - + The axis direction around which the elements in a polar or a circular array will be created La direzione dell'asse attorno alla quale saranno creati gli elementi in una serie polare o circolare - + Center point for polar and circular arrays. The 'Axis' passes through this point. Punto centrale per serie polari e circolari. L' 'Asse' passa attraverso questo punto. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7381,42 +7386,42 @@ Il suo collocamento, posizione e rotazione, verranno utilizzati durante la creaz Lasciare vuota questa proprietà per poter impostare manualmente 'Asse' e 'Centro'. - + Number of copies in the polar direction Numero di copie nella direzione polare - + Distance and orientation of intervals in 'Axis' direction Distanza e orientamento degli intervalli nella direzione dell' 'Asse' - + Angle to cover with copies Angolo da coprire con le copie - + Distance between circular layers Distanza tra i livelli circolari - + Distance between copies in the same circular layer Distanza tra le copie nello stesso livello circolare - + Number of circular layers. The 'Base' object counts as one layer. Numero di livelli circolari. L'oggetto 'Base' conta come un livello. - + A parameter that determines how many symmetry planes the circular array will have. Un parametro che determina quanti piani di simmetria avrà la serie circolare. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Numero totale di elementi della serie. diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 03b5e05157..6eb8fda0f6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 7b8d30d229..6e5f00479f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -3301,19 +3301,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3322,15 +3322,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3359,22 +3359,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4816,8 +4816,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4826,9 +4826,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4845,13 +4845,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4903,7 +4903,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4959,7 +4959,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5306,6 +5306,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7114,7 +7119,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7244,7 +7249,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7307,7 +7312,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7318,54 +7323,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7374,42 +7379,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.qm b/src/Mod/Draft/Resources/translations/Draft_ka.qm index dba9c39e65..723d3c486e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ka.qm and b/src/Mod/Draft/Resources/translations/Draft_ka.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts index f72620e370..555a1b6f77 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ka.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts @@ -3310,19 +3310,19 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + - - + + - + - + @@ -3331,15 +3331,15 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - - - - - + + + + + - - + + @@ -3368,22 +3368,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer ხილვადობა გამორთულია; ამოღებულია სიიდან: - + image is Null ნულოვანი გამოსახულება - + filename does not exist on the system or in the resource file ფაილი არ არსებობს არც სისტემაში არც რესურსის ფაილში - + unable to load texture ტექსტურის ჩატვირთვის შეცდომა - + Does not have 'ViewObject.RootNode'. არ აქვს 'ViewObject.RootNode'. @@ -4825,8 +4825,8 @@ The final angle will be the base angle plus this amount. რუკის რეჟიმი: - - + + @@ -4835,9 +4835,9 @@ The final angle will be the base angle plus this amount. არასწორი შეყვანა: უნდა იყოს რიცხვი. - - - + + + @@ -4854,13 +4854,13 @@ The final angle will be the base angle plus this amount. არასწორი შეყვანა: უნდა იყოს ვექტორი. - + Wrong input: must be a list or tuple of strings, or a single string. არასწორი შეყვანა: უნდა იყოს სტრიქონების სტრუქტურა ან ერთი სტრიქონი. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. არასწორი შეყვანა: უნდა იყოს 'საწყისი', 'ფრენე' ან 'მხები'. @@ -4912,7 +4912,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. არასწორი შეყვანა: უნდა იყოს მდებარეობა, ვექტორი ან ბრუნვა. @@ -4968,7 +4968,7 @@ The final angle will be the base angle plus this amount. არასწორი შეყვანა: უნდა იყოს ორი ელემენტის სია. მაგალითად, [object, 'Edge1']. - + Wrong input: object has the wrong type. არასწორი შეყვანა: ობიექტის ტიპი არასწორია. @@ -5315,6 +5315,11 @@ The final angle will be the base angle plus this amount. added missing view properties ხედის ნაკლული თვისებები დამატებულია + + + added property 'Count' + added property 'Count' + Workbench @@ -7120,7 +7125,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) მასივის ელემენტების ჩვენება (მხოლოდ ბმულების მასივებისთვის) @@ -7248,7 +7253,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated საბაზისო ობიექტი, რომელიც გაორმაგდება @@ -7311,7 +7316,7 @@ Otherwise the copies will have the same orientation as the original Base object. წინააღმდეგ შემთხვევაში, ასლებს ექნებათ იგივე ორიენტაცია, როგორიც საწყის ობიექტს. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7322,54 +7327,54 @@ Otherwise the copies will have the same orientation as the original Base object. - წრიული: ათავსებს ასლებს კონცენტრირებულ წრიულ ფენებში საბაზისო ობიექტის გარშემო. - + Specifies if the copies should be fused together if they touch each other (slower) განსაზღვრავს, უნდა მოხდეს თუ არა ასლების შერწყმა თუ მათ შეუძლიათ, შეეხონ ერთმანეთს (უფრო ნელი) - + Number of copies in X direction ასლების რაოდენობა X მიმართულებით - + Number of copies in Y direction ასლების რაოდენობა Y მიმართულებით - + Number of copies in Z direction ასლების რაოდენობა Z მიმართულებით - + Distance and orientation of intervals in X direction ინტერვალების დაცილება და ორიენტაცია X ღერძის მიმართულებით - + Distance and orientation of intervals in Y direction ინტერვალების დაცილება და ორიენტაცია Y ღერძის მიმართულებით - + Distance and orientation of intervals in Z direction ინტერვალების დაცილება და ორიენტაცია Z ღერძის მიმართულებითv - + The axis direction around which the elements in a polar or a circular array will be created ღერძის მიმართულება, რომლის გარშემოც შეიქმნება ელემენტები პოლარულ ან წრიულ მასივში - + Center point for polar and circular arrays. The 'Axis' passes through this point. ცენტრალური წერტილი პოლარული და წრიული მასივებისთვის. "ღერძი" გადის ამ წერტილში. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7378,42 +7383,42 @@ Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction ასლების რაოდენობა პოლარულობის მიმართულებით - + Distance and orientation of intervals in 'Axis' direction ინტერვალების დაცილება და ორიენტაცია ღერძის მიმართულებით - + Angle to cover with copies ასლებით დასაფარი კუთხე - + Distance between circular layers მანძილი წრიულ ფენებს შორის - + Distance between copies in the same circular layer მანძილი ასლებს შორის იმავე წრიულ ფენაში - + Number of circular layers. The 'Base' object counts as one layer. წრიული ფენების რაოდენობა. "საბაზისო" ობიექტი ითვლება ერთ ფენად. - + A parameter that determines how many symmetry planes the circular array will have. პარამეტრი, რომელიც განსაზღვრავს რამდენი სიმეტრიის სიბრტყე ექნება წრიულ მასივს. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. მასივში ელემენტების საერთო რაოდენობა. diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index 0d419f765a..a3118ca594 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index d940c2b028..bd61755c89 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -3310,19 +3310,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3331,15 +3331,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3368,22 +3368,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4825,8 +4825,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4835,9 +4835,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4854,13 +4854,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4912,7 +4912,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4968,7 +4968,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,6 +5315,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7123,7 +7128,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7253,7 +7258,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7316,7 +7321,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7327,54 +7332,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7383,42 +7388,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index 6466bdd629..896f2f3ed7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 52d49802fa..910183d8b6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -3313,19 +3313,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3334,15 +3334,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3371,22 +3371,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4828,8 +4828,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4838,9 +4838,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4857,13 +4857,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4915,7 +4915,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4971,7 +4971,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5318,6 +5318,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7126,7 +7131,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7256,7 +7261,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7319,7 +7324,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7330,54 +7335,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7386,42 +7391,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index 89a272067f..8d39762d6a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index ebb05996cf..efe681a1e3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -406,7 +406,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Miejsce na ikonkę) + (Miejsce na ikonę) @@ -542,7 +542,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Miejsce na ikonę) + (Miejsce na ikonkę) @@ -2629,7 +2629,7 @@ Te linie są grubsze niż normalne linie siatki. Global - Globalne + Globalnie @@ -2980,7 +2980,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele String - Ciąg + Ciąg znaków @@ -3322,19 +3322,19 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + - - + + - + - + @@ -3343,15 +3343,15 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - - - - - + + + + + - - + + @@ -3380,22 +3380,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Widoczność wyłączona, usunięto z listy: - + image is Null brak obrazu - + filename does not exist on the system or in the resource file nazwa pliku nie istnieje w systemie lub w zasobach - + unable to load texture nie można załadować tekstury - + Does not have 'ViewObject.RootNode'. Nie ma "ViewObject.RootNode". @@ -4837,8 +4837,8 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Tryb mapy: - - + + @@ -4847,9 +4847,9 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Błędne wejście: musi być liczba. - - - + + + @@ -4866,13 +4866,13 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Błędne wejście: musi być wektor. - + Wrong input: must be a list or tuple of strings, or a single string. Nieprawidłowe dane wejściowe: spodziewana lista lub tupla ciągów znaków, albo pojedynczy ciąg znaków. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Nieprawidłowe dane wejściowe: spodziewany ciąg znaków "Oryginalny", "Swobodny" lub "Styczny". @@ -4924,7 +4924,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. - + Wrong input: must be a placement, a vector, or a rotation. Nieprawidłowe dane wejściowe: spodziewane umiejscowienie, wektor lub obrót. @@ -4980,7 +4980,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Nieprawidłowe dane wejściowe: spodziewana lista dwóch elementów. Na przykład [obiekt, "Krawędź1"]. - + Wrong input: object has the wrong type. Nieprawidłowe dane wejściowe: obiekt ma błędny typ. @@ -5130,7 +5130,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Edit - Edycja + Edytuj @@ -5327,6 +5327,11 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.added missing view properties dodano brakujące właściwości widoku + + + added property 'Count' + added property 'Count' + Workbench @@ -7138,7 +7143,7 @@ ustaw wartość Prawda dla utworzenia połączenia, lub Fałsz dla kształtu zł - + Show the individual array elements (only for Link arrays) Pokaż poszczególne elementy szyku (tylko dla szyków powiązań) @@ -7268,7 +7273,7 @@ będzie można je edytować tylko przez zmianę stylu za pomocą narzędzia "edy - + The base object that will be duplicated Obiekt podstawowy, który zostanie zduplikowany @@ -7330,7 +7335,7 @@ Otherwise the copies will have the same orientation as the original Base object. W przeciwnym razie duplikaty będą miały taką samą orientację jak oryginalna linia bazowa. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7341,54 +7346,54 @@ W przeciwnym razie duplikaty będą miały taką samą orientację jak oryginaln - Kołowy: umieszcza kopie w koncentrycznych warstwach kołowych wokół obiektu bazowego. - + Specifies if the copies should be fused together if they touch each other (slower) Określa, czy kopie powinny być połączone razem, jeśli dotykają się wzajemnie (wolniej) - + Number of copies in X direction Liczba kopii w kierunku X - + Number of copies in Y direction Liczba kopii w kierunku Y - + Number of copies in Z direction Liczba kopii w kierunku Z - + Distance and orientation of intervals in X direction Dystans i orientacja interwałów w kierunku X - + Distance and orientation of intervals in Y direction Dystans i orientacja interwałów w kierunku Y - + Distance and orientation of intervals in Z direction Dystans i orientacja interwałów w kierunku Z - + The axis direction around which the elements in a polar or a circular array will be created Kierunek osi, wokół którego będą tworzone elementy w szyku biegunowym lub kołowym - + Center point for polar and circular arrays. The 'Axis' passes through this point. Punkt środkowy dla szyków biegunowych lub kołowych Oś przechodzi przez ten punkt. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7397,42 +7402,42 @@ Jej umiejscowienie, pozycja i obrót, będą używane podczas tworzenia szyków Pozostaw tę właściwość pustą, aby móc ustawić " Oś" i "Środek" ręcznie. - + Number of copies in the polar direction Liczba kopii w kierunku biegunowym - + Distance and orientation of intervals in 'Axis' direction Odległość i orientacja przedziałów w kierunku "osi" - + Angle to cover with copies Kąt do pokrycia kopiami - + Distance between circular layers Odległość między warstwami kołowymi - + Distance between copies in the same circular layer Odległość między kopiami w tej samej warstwie szyku kołowego - + Number of circular layers. The 'Base' object counts as one layer. Liczba warstw kołowych. Obiekt "Podstawowy" zalicza się jako jedna warstwa. - + A parameter that determines how many symmetry planes the circular array will have. Parametr określający ilość płaszczyzn symetrii dla szyku kołowego. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Całkowita liczba elementów w szyku. diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 7ad1efb261..eb95e14cef 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 9ea3b08562..3d6cd87c34 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -3307,19 +3307,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3328,15 +3328,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3365,22 +3365,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4822,8 +4822,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4832,9 +4832,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4851,13 +4851,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4909,7 +4909,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4965,7 +4965,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5312,6 +5312,11 @@ The final angle will be the base angle plus this amount. added missing view properties propriedades de visualização ausentes adicionadas + + + added property 'Count' + added property 'Count' + Workbench @@ -7120,7 +7125,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7250,7 +7255,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7313,7 +7318,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7324,54 +7329,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7380,42 +7385,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index b7e8fa4831..763f688a02 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index cce5b2b2bf..70fdb2b371 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -3311,19 +3311,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3332,15 +3332,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3369,22 +3369,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4826,8 +4826,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4836,9 +4836,9 @@ The final angle will be the base angle plus this amount. Entrada errada: deve ser um número. - - - + + + @@ -4855,13 +4855,13 @@ The final angle will be the base angle plus this amount. Entrada errada: deve ser um vetor. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4913,7 +4913,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4969,7 +4969,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5316,6 +5316,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7124,7 +7129,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7254,7 +7259,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7317,7 +7322,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7328,54 +7333,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7384,42 +7389,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index f8891fdecf..fa453f7486 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 7804ef39c8..62645cf87d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -3316,19 +3316,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3337,15 +3337,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3374,22 +3374,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4831,8 +4831,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4841,9 +4841,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4860,13 +4860,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4918,7 +4918,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4974,7 +4974,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5321,6 +5321,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7129,7 +7134,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7259,7 +7264,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7322,7 +7327,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7333,54 +7338,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7389,42 +7394,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 0b5c1f20f0..dd7fff9503 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 94e0def899..1bc16c9d94 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -2628,12 +2628,12 @@ This might fail for post DXF R12 templates. Copy - Копировать + Скопировать Subelement mode - Subelement mode + Режим дочернего элемента @@ -2648,17 +2648,17 @@ This might fail for post DXF R12 templates. Snap On/Off - Snap On/Off + Привязка вкл./выкл. Increase snap radius - Increase snap radius + Увеличить радиус срабатывания привязки Decrease snap radius - Decrease snap radius + Уменьшить радиус срабатывания привязки @@ -2684,12 +2684,12 @@ This might fail for post DXF R12 templates. Add custom snap point - Add custom snap point + Добавить дополнительную точку привязки Length mode - Length mode + Режим длины @@ -2710,7 +2710,7 @@ This might fail for post DXF R12 templates. Undo last segment - Undo last segment + Отменить последний сегмент @@ -2751,7 +2751,7 @@ This might fail for post DXF R12 templates. active command: - active command: + активная команда: @@ -2761,7 +2761,7 @@ This might fail for post DXF R12 templates. X coordinate of next point - X coordinate of next point + Координата X следующей точки @@ -2781,22 +2781,22 @@ This might fail for post DXF R12 templates. Y coordinate of next point - Y coordinate of next point + Координата Y следующей точки Z coordinate of next point - Z coordinate of next point + Координата Z следующей точки Enter point - Enter point + Введите точку Enter a new point with the given coordinates - Enter a new point with the given coordinates + Введите новую точку с заданными координатами @@ -2812,12 +2812,12 @@ This might fail for post DXF R12 templates. Length of current segment - Length of current segment + Длина текущего сегмента Angle of current segment - Angle of current segment + Угол текущего сегмента @@ -2834,21 +2834,20 @@ This might fail for post DXF R12 templates. Radius of Circle - Radius of Circle + Радиус окружности Coordinates relative to last point or to coordinate system origin if is the first point to set - Coordinates relative to last point or to coordinate system origin -if is the first point to set + Координаты будут указаны относительно последней точки или относительно центра системы координат если это первая заданная точка Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - Coordinates relative to global coordinate system. -Uncheck to use working plane coordinate system + Координаты будут указаны относительно центра глобальной системы координат. +Отключите, если хотите использовать систему координат рабочей плоскости @@ -2859,8 +2858,8 @@ Uncheck to use working plane coordinate system Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled - Check this if the object should appear as filled, otherwise it will appear as wireframe. -Not available if Draft preference option 'Use Part Primitives' is enabled + Используйте, если объект должен отображаться с заливкой, в противном случае он будет отображаться как каркас. +Недоступно, если включена опция «Использовать примитивы Детали"» @@ -2870,22 +2869,22 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Finishes the current drawing or editing operation - Finishes the current drawing or editing operation + Завершить текущую операцию черчения или редактирования If checked, command will not finish until you press the command button again - If checked, command will not finish until you press the command button again + Если выбрано, команда не будет завершена до повторного нажатия кнопки If checked, an OCC-style offset will be performed instead of the classic offset - If checked, an OCC-style offset will be performed instead of the classic offset + Если выбрано, вместо классического смещения будет выполняться смещение в стиле OCC &OCC-style offset - &OCC-style offset + &Смещение в стиле OCC @@ -2895,17 +2894,17 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Undo the last segment - Undo the last segment + Отменить последний сегмент Finishes and closes the current line - Finishes and closes the current line + Закончить и замкнуть текущую линию Wipes the existing segments of this line and starts again from the last point - Wipes the existing segments of this line and starts again from the last point + Стереть существующие сегменты этой линии и начать с последней точки @@ -2915,17 +2914,17 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Reorients the working plane on the last segment - Reorients the working plane on the last segment + Переориентирует рабочую плоскость по последнему сегменту Selects an existing edge to be measured by this dimension - Selects an existing edge to be measured by this dimension + Выбирает существующее ребро для указания размера Sides - Sides + Стороны @@ -2935,17 +2934,17 @@ Not available if Draft preference option 'Use Part Primitives' is enabled If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands + Если выбрано, объекты будут скопированы, иначе будут перенесены. Чтобы сохранить режим для последующих команд, перейдите в Настройки-> Чертёж-> Режим глобального копирования Modify subelements - Modify subelements + Изменение дочерних элементов If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Если выбрано, вместо полных объектов будут изменены дочерние элементы @@ -2960,7 +2959,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Height of text - Height of text + Высота текста @@ -2970,7 +2969,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Intercharacter spacing - Intercharacter spacing + Межсимвольное расстояние @@ -2980,22 +2979,22 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Full path to font file: - Full path to font file: + Полный путь к файлу шрифта: Open a FileChooser for font file - Open a FileChooser for font file + Открыть обозреватель файлов для выбора файла шрифта Create text - Create text + Создать текст Press this button to create the text object, or finish your text with two blank lines - Press this button to create the text object, or finish your text with two blank lines + Нажмите эту кнопку, чтобы создать текстовый объект, или закончите ввод текста двумя пустыми строками @@ -3004,24 +3003,24 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Current working plane - Current working plane + Текущая рабочая плоскость Change default style for new objects - Change default style for new objects + Изменить стиль по умолчанию для новых объектов Toggle construction mode - Toggle construction mode + Переключить режим построения Autogroup off - Autogroup off + Автогруппирование выключено @@ -3080,7 +3079,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Offset distance - Offset distance + Расстояние смещения @@ -3298,19 +3297,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3319,15 +3318,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3356,22 +3355,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3429,43 +3428,43 @@ To enabled FreeCAD to download these libraries, answer Yes. doesn't exist in one of the objects - doesn't exist in one of the objects + не существует ни в одном из объектов %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s разделяет одну базу с %d другими объектами. Пожалуйста, проверьте, хотите ли вы изменить это. %s cannot be modified because its placement is readonly. - %s cannot be modified because its placement is readonly. + %s не может быть изменено, потому что это размещение только для чтения. Wrong input: unknown document. - Wrong input: unknown document. + Ошибка ввода: неизвестный документ. This function will be deprecated in - This function will be deprecated in + Эта функция устареет в Please use - Please use + Пожалуйста, используйте This function will be deprecated. - This function will be deprecated. + Эта функция устаревает. Pick a face, 3 vertices or a WP Proxy to define the drawing plane - Pick a face, 3 vertices or a WP Proxy to define the drawing plane + Выберите грань, 3 вершины или WP-прокси для определения плоскости чертежа @@ -4813,8 +4812,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4823,9 +4822,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4842,13 +4841,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4900,7 +4899,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4956,7 +4955,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5106,7 +5105,7 @@ The final angle will be the base angle plus this amount. Edit - Редактировать + Правка @@ -5303,6 +5302,11 @@ The final angle will be the base angle plus this amount. added missing view properties добавлены недостающие свойства вида + + + added property 'Count' + added property 'Count' + Workbench @@ -5504,7 +5508,7 @@ from menu Tools -> Addon Manager Modify subelements - Modify subelements + Изменение дочерних элементов @@ -6585,7 +6589,7 @@ A 'Point link array' is more efficient when handling many copies. Toggle construction mode - Toggle construction mode + Переключить режим построения @@ -6959,7 +6963,7 @@ It is a list of strings; each element in the list will be displayed in its own l Height of text - Height of text + Высота текста @@ -7111,7 +7115,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7241,7 +7245,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7304,7 +7308,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7315,54 +7319,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7371,42 +7375,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. @@ -7547,7 +7551,7 @@ This property is read-only, as the number depends on the points in 'Point Object The placement of this object - The placement of this object + Размещение объекта diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 7736e50e24..4f5f3a2fcf 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index 6b6ad32010..ba3ab42bca 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -3317,19 +3317,19 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. - + - - + + - + - + @@ -3338,15 +3338,15 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. - - - - - + + + + + - - + + @@ -3375,22 +3375,22 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Vidnost izključena; odstranjeno s seznama: - + image is Null slika je ničelna - + filename does not exist on the system or in the resource file imena datoteke ni v sistemu ali v mapi z viri - + unable to load texture ustroja ni mogoče naložiti - + Does not have 'ViewObject.RootNode'. Nima 'ViewObject.RootNode' (KorenskoVozlišče.PogledaPredmeta). @@ -4832,8 +4832,8 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Način preslikave: - - + + @@ -4842,9 +4842,9 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Napačen vnos: biti mora številka. - - - + + + @@ -4861,13 +4861,13 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Napačen vnos: biti mora vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Napačen vnos: biti mora seznam ali sklop nizov ali en niz. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Napačen vnos: biti mora "Izvirno", "Frenet" ali "Dotikalno". @@ -4919,7 +4919,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta. - + Wrong input: must be a placement, a vector, or a rotation. Napačen vnos: biti mora postavitev, vektor ali zasukanost. @@ -4975,7 +4975,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Napačen vnos: biti mora seznam dveh prvin. Npr. [predmet, "Rob1"]. - + Wrong input: object has the wrong type. Napačen vnos: predmet je napačne vrste. @@ -5322,6 +5322,11 @@ Končni kót bo seštevek izhodiščnega in tega kóta. added missing view properties dodane manjkajoče lastnosti pogleda + + + added property 'Count' + added property 'Count' + Workbench @@ -7128,7 +7133,7 @@ vklopite, če želite združevanje oz. izklopite, če želite sestavljanje - + Show the individual array elements (only for Link arrays) Pokaži posamezne predmete razpostavitve (le pri Vezanih razpostavitvah) @@ -7259,7 +7264,7 @@ urediti jih bo mogoče le s spremembo sloga v orodju "Urejevalnik pripisnih slog - + The base object that will be duplicated Izhodiščni predmet, ki bo podvojen @@ -7322,7 +7327,7 @@ Otherwise the copies will have the same orientation as the original Base object. V nasprotnem primeru bodo imeli dvojniki enako usmeritev kot izvirni Izhodiščni predmet. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7333,145 +7338,145 @@ V nasprotnem primeru bodo imeli dvojniki enako usmeritev kot izvirni Izhodiščn - Obročna: postavlja dvojnike po sosrediščnih obročih okrog izhodiščnega predmeta. - + Specifies if the copies should be fused together if they touch each other (slower) Določa, ali naj se dvojniki, ki se dotikajo med sabo, združijo (počasnejše) - + Number of copies in X direction Število dvojnikov v smeri X - + Number of copies in Y direction Število dvojnikov v smeri Y - + Number of copies in Z direction Število dvojnikov v smeri Z - + Distance and orientation of intervals in X direction - Distance and orientation of intervals in X direction + Razdalja in usmerjenost korakov v smeri X - + Distance and orientation of intervals in Y direction - Distance and orientation of intervals in Y direction + Razdalja in usmerjenost korakov v smeri Y - + Distance and orientation of intervals in Z direction - Distance and orientation of intervals in Z direction + Razdalja in usmerjenost intervalov v smeri Z - + The axis direction around which the elements in a polar or a circular array will be created - The axis direction around which the elements in a polar or a circular array will be created + Smer osi, okoli katere bodo ustvarjeni predmeti pri krožni in obročni razpostavitvi - + Center point for polar and circular arrays. The 'Axis' passes through this point. - Center point for polar and circular arrays. -The 'Axis' passes through this point. + Središčna točka krožnih in obročnih razpostavitev. +Os gre skozi to točko. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. - The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. -Its placement, position and rotation, will be used when creating polar and circular arrays. -Leave this property empty to be able to set 'Axis' and 'Center' manually. + Osni predmet, ki nadomesti vrednost "Osi" in "Središča", npr. osnovna črta. +Pri krožnih in obročnih razpostavitvah bo vzeta njegova postavitev, položaj in zasukanost. +Če želite nastavljati "Os" in "Središče" ročno, pustite to lastnost prazno. - + Number of copies in the polar direction - Number of copies in the polar direction + Število dvojnikov v krožni smeri - + Distance and orientation of intervals in 'Axis' direction - Distance and orientation of intervals in 'Axis' direction + Dolžina in usmerjenost korakov v smeri "Osi" - + Angle to cover with copies - Angle to cover with copies + Kot, ki naj ga zapolnijo dvojniki - + Distance between circular layers - Distance between circular layers + Razdalja me obroči - + Distance between copies in the same circular layer - Distance between copies in the same circular layer - - - - Number of circular layers. The 'Base' object counts as one layer. - Number of circular layers. The 'Base' object counts as one layer. - - - - A parameter that determines how many symmetry planes the circular array will have. - A parameter that determines how many symmetry planes the circular array will have. + Razdalja med dvojniki na istem obroču + Number of circular layers. The 'Base' object counts as one layer. + Število obročev. Izhodiščni predmet se šteje kot prvi obroč. + + + + A parameter that determines how many symmetry planes the circular array will have. + Določilka, ki narekuje število somernostnih ravnin obročne razpostavitve. + + + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. - Total number of elements in the array. -This property is read-only, as the number depends on the parameters of the array. + Skupno število predmetov v razpostavitvi. +Ta lastnost je le za branje, saj je število odvisno od določilk razpostavitve. Base object that will be duplicated - Base object that will be duplicated + Izhodiščni predmet, ki se bo podvajal Object containing points used to distribute the copies. - Object containing points used to distribute the copies. + Predmeti, katerih točke se uporabi za razpostavitev dvojnikov. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. - Number of copies in the array. -This property is read-only, as the number depends on the points in 'Point Object'. + Število dvojnikov v razpostavitvi. +Ta lastnost je le za branje, saj je število odvisno od števila točk v "Točkovnem predmetu". Additional placement, shift and rotation, that will be applied to each copy - Additional placement, shift and rotation, that will be applied to each copy + Dodatni zamik, postavitev in zasuk, ki bodo uveljavljeni pri vsakem dvojniku The base object this 2D view must represent - The base object this 2D view must represent + Osnovni objekt, ki ga mora predstavljati ta 2D pogled The projection vector of this object - The projection vector of this object + Vektor preslikavanja tega predmeta The way the viewed object must be projected - The way the viewed object must be projected + Način preslikave opazovanega predmeta The indices of the faces to be projected in Individual Faces mode - The indices of the faces to be projected in Individual Faces mode + Kazala ploskev, ki naj se preslikajo v načinu Posameznih ploskev @@ -7481,31 +7486,30 @@ This property is read-only, as the number depends on the points in 'Point Object Fuse wall and structure objects of same type and material - Fuse wall and structure objects of same type and material + Zlij steno s konstrukcijskimi predmeti enake vrste in snovi Tessellate Ellipses and B-splines into line segments - Tessellate Ellipses and B-splines into line segments + Razdeli elipse in B-zlepke na črtne odseke For Cutlines and Cutfaces modes, this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location + V načinih prereznic in prereznih ploskev, + to pušča ploskve na mestu rezanja Length of line segments if tessellating Ellipses or B-splines into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments + Dolžina ravnih odsekov, če se na njih razdeli elipse ali B-zlepke If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Če drži, potem bo ta predmet vključeval le vidne predmete @@ -7515,32 +7519,32 @@ This property is read-only, as the number depends on the points in 'Point Object A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. - A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. + Seznam izključujočih imen predmetov. Če je ime opazovaneg predmeta na seznamu, ta ne bo izrisan. If this is True, only solid geometry is handled. This overrides the base object's Only Solids property - If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + Če drži, potem se obravnava le telesne geometrije. To povozi lastnost "Le telesa" izhodiščnega predmeta If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property - If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Če drži, je vsebina v primeru izvedljivosti rezana do robov prerezne ravnine. To povozi lastnost "Zamejitev" osnovnega predmeta This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Ta predmet bo preračunan le, če to drži. The points of the Bezier curve - The points of the Bezier curve + Točke Bezierjeve krivulje The degree of the Bezier function - The degree of the Bezier function + Stopnja Bezierjeve funkcije @@ -7550,17 +7554,17 @@ This property is read-only, as the number depends on the points in 'Point Object If the Bezier curve should be closed or not - If the Bezier curve should be closed or not + Ali naj bo Bezierjeva krivulja sklenjena, ali ne Create a face if this curve is closed - Create a face if this curve is closed + Ustvari ploskev, če je ta krivulja sklenjena The length of this object - The length of this object + Dolžina tega predmeta @@ -7570,66 +7574,65 @@ This property is read-only, as the number depends on the points in 'Point Object X Location - X Location + X položaj Y Location - Y Location + Y položaj Z Location - Z Location + Z položaj Start angle of the elliptical arc - Start angle of the elliptical arc + Začetni kot eliptičnega loka End angle of the elliptical arc (for a full circle, give it same value as First Angle) - End angle of the elliptical arc - - (for a full circle, give it same value as First Angle) + Končni kot eliptičnega loka + (za sklenjeno elipso mora vrednost biti enaka začetnemu kotu) Minor radius of the ellipse - Minor radius of the ellipse + Mali polmer elipse Major radius of the ellipse - Major radius of the ellipse + Veliki polmer elipse Area of this object - Area of this object + Površina tega predmeta The start point of this line. - The start point of this line. + Začetna točka te črte. The end point of this line. - The end point of this line. + Končna točka te črte. The length of this line. - The length of this line. + Dolžina te črte. Radius to use to fillet the corner. - Radius to use to fillet the corner. + Polmer zaokrožitve vogala. @@ -7639,7 +7642,7 @@ This property is read-only, as the number depends on the points in 'Point Object The object measured by this dimension object - The object measured by this dimension object + Objekt, izmerjen s to koto @@ -7650,13 +7653,13 @@ There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. - The object, and specific subelements of it, -that this dimension object is measuring. + Predmet in določene njegove podprvine, +ki jih meri ta kota. -There are various possibilities: -- An object, and one of its edges. -- An object, and two of its vertices. -- An arc object, and its edge. +Obstajajo različne možnosti: +- Predmet in eden izmed njegovih robov. +- Predmet in dve njegovi ogljišči. +- Ločni predmet in njegov rob. @@ -7668,14 +7671,11 @@ is to the measured object. that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. - A point through which the dimension line, or an extrapolation of it, will pass. + Točka, skozi katero bo potekala kotnica ali njen navidezen podaljšek. -- For linear dimensions, this property controls how close the dimension line -is to the measured object. -- For radial dimensions, this controls the direction of the dimension line -that displays the measured radius or diameter. -- For angular dimensions, this controls the radius of the dimension arc -that displays the measured angle. +- Pri premih kotah ta lastnost nadzira oddaljenost kotirne črte od merjenega predmeta. +- Pri polmernih kotah določa smer kotirne črte, ki prikazuje izmerjeni polmer ali premer. +- Pri kotnih kotah določa polmer kotirnega loka, ki prikazuje izmerjen kot. @@ -7683,10 +7683,10 @@ that displays the measured angle. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. - Starting point of the dimension line. + Začetna točka kotnice. -If it is a radius dimension it will be the center of the arc. -If it is a diameter dimension it will be a point that lies on the arc. +Če gre za polmerno koto, je to središče loka. +Če je premerna kota, je to točka, ki leži na loku. @@ -7694,17 +7694,17 @@ If it is a diameter dimension it will be a point that lies on the arc. - Ending point of the dimension line. + Končna točka kotirne črte. -If it is a radius or diameter dimension -it will be a point that lies on the arc. +Če gre za polmerno ali premerno koto, +bo to točka, ki leži na loku. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. - The direction of the dimension line. -If this remains '(0,0,0)', the direction will be calculated automatically. + Smer kotirne črte. +Če ostane "(0,0,0)", bo smer samodejno določena. @@ -7715,34 +7715,33 @@ from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. - The value of the measurement. + Izmerjena vrednost. -This property is read-only because the value is calculated -from the 'Start' and 'End' properties. +Ta lastnost je le za branje, saj je vrednost izračunana +iz lastnosti "Začetka" in "Konca". -If the 'Linked Geometry' is an arc or circle, this 'Distance' -is the radius or diameter, depending on the 'Diameter' property. +Če je "Vezana geometrija" lok ali krožnica, je "Razdalja" +polmer oz. premer, odvisno od značilnosti "Premer". When measuring circular arcs, it determines whether to display the radius or the diameter value - When measuring circular arcs, it determines whether to display -the radius or the diameter value + Pri merjenju krožnih lokov določa, ali se prikazuje velikost polmera ali premera Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - Starting angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. + Začetni kót kotnice (krožnega loka). +Lok se izriše v nasprotni smeri urinega kazalca. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - Ending angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. + Zaključni kót kotirne črte (krožnega loka). +Lok se izriše v nasprotni smeri urinega kazalca. @@ -7750,10 +7749,10 @@ The arc is drawn counter-clockwise. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. - The center point of the dimension line, which is a circular arc. + Središčna točka kotnice, ki je krožni lok. -This is normally the point where two line segments, or their extensions -intersect, resulting in the measured 'Angle' between them. +To je navadno točka, v kateri se dva odseka črte ali njuna podaljška +sekata in tvorita merjeni "Kót". @@ -7761,60 +7760,60 @@ intersect, resulting in the measured 'Angle' between them. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. - The value of the measurement. + Izmerjena vrednost. -This property is read-only because the value is calculated from -the 'First Angle' and 'Last Angle' properties. +Ta lastnost je le za branje, saj je vrednost izračunana iz +lastnosti "Prvega kota" in "Zadnjega kota". Length of the rectangle - Length of the rectangle + Dolžina pravokotnika Height of the rectangle - Height of the rectangle + Višina pravokotnika Horizontal subdivisions of this rectangle - Horizontal subdivisions of this rectangle + Vodoravne razdelitve tega pravokotnika Vertical subdivisions of this rectangle - Vertical subdivisions of this rectangle + Navpične razdelitve tega pravokotnika Linked faces - Linked faces + Povezane ploskve Specifies if splitter lines must be removed - Specifies if splitter lines must be removed + Določa, ali morajo biti delitvene črte odstranjene An optional extrusion value to be applied to all faces - An optional extrusion value to be applied to all faces + Izbirna vrednost izrivanja, ki bo izvedena na vseh ploskvah An optional offset value to be applied to all faces - An optional offset value to be applied to all faces + Izbirna vrednost odmikanja, ki bo izvedena na vseh ploskvah This specifies if the shapes sew - This specifies if the shapes sew + To določa, ali se oblike sprijemajo The area of the faces of this Facebinder - The area of the faces of this Facebinder + Površina ploskev tega Vezalnika površij @@ -7824,12 +7823,12 @@ the 'First Angle' and 'Last Angle' properties. Projection direction - Projection direction + Smer preslikave The width of the lines inside this object - The width of the lines inside this object + Debelina črt znotraj tega predmeta @@ -7839,22 +7838,22 @@ the 'First Angle' and 'Last Angle' properties. The spacing between lines of text - The spacing between lines of text + Razmik med vrsticami besedila The color of the projected objects - The color of the projected objects + Barva preslikanih predmetov Shape Fill Style - Shape Fill Style + Slog zapolnjevanja oblike Line Style - Line Style + Slog črt @@ -7864,72 +7863,72 @@ the 'First Angle' and 'Last Angle' properties. The components of this block - The components of this block + Sestavine tega zbira The vertices of the wire - The vertices of the wire + Oglišča črtovja If the wire is closed or not - If the wire is closed or not + Ali je črtovje sklenjeno ali ne The base object is the wire, it's formed from 2 objects - The base object is the wire, it's formed from 2 objects + Izhodiščni predmet je črtovje, sestavljeno iz dveh predmetov The tool object is the wire, it's formed from 2 objects - The tool object is the wire, it's formed from 2 objects + Orodni predmet je črtovje, sestavljeno iz dveh predmetov The start point of this line - The start point of this line + Začetna točka te črte The end point of this line - The end point of this line + Končna točka te črte The length of this line - The length of this line + Dolžina te črte Create a face if this object is closed - Create a face if this object is closed + Ustvari ploskev, če je ta predmet sklenjen The number of subdivisions of each edge - The number of subdivisions of each edge + Število razdelitev vsakega roba The points of the B-spline - The points of the B-spline + Točke B-zlepka If the B-spline is closed or not - If the B-spline is closed or not + Ali je B-zlepek sklenjen ali ne Create a face if this spline is closed - Create a face if this spline is closed + Ustvari ploskev, če je ta zlepek sklenjen Parameterization factor - Parameterization factor + Količnik odoločiljenja @@ -7939,7 +7938,7 @@ the 'First Angle' and 'Last Angle' properties. Show the individual array elements - Show the individual array elements + Prikaži posamezne predmete razpostavitve @@ -7950,7 +7949,7 @@ the 'First Angle' and 'Last Angle' properties. Line spacing (relative to font size) - Line spacing (relative to font size) + Medvrstični razmik (glede na velikost pisave) @@ -7971,12 +7970,12 @@ the 'First Angle' and 'Last Angle' properties. The type of frame around the text of this object - The type of frame around the text of this object + Vrsta okvirja okrog besedila tega predmeta Display a leader line or not - Display a leader line or not + Prikaži opisnično črto, ali ne @@ -7991,57 +7990,57 @@ the 'First Angle' and 'Last Angle' properties. Defines an SVG pattern. - Defines an SVG pattern. + Določa SVG vzorec. Defines the size of the SVG pattern. - Defines the size of the SVG pattern. + Določa velikost SVG vzorca. If it is true, the objects contained within this layer will adopt the line color of the layer - If it is true, the objects contained within this layer will adopt the line color of the layer + Če drži, bodo predmeti znotraj te plasti prevzeli parvo črt po plasti If it is true, the objects contained within this layer will adopt the shape color of the layer - If it is true, the objects contained within this layer will adopt the shape color of the layer + Če drži, bodo predmeti znotraj te plasti prevzeli barvo oblik po plasti If it is true, the print color will be used when objects in this layer are placed on a TechDraw page - If it is true, the print color will be used when objects in this layer are placed on a TechDraw page + Če drži, bo za predmete iz te plasti, ko bodo postavljeni na stran Tehnične risbe (TechDraw), uporabljena tiskalna barva The line color of the objects contained within this layer - The line color of the objects contained within this layer + Barva črt predmetov, ki so v tej plasti The shape color of the objects contained within this layer - The shape color of the objects contained within this layer + Barva oblike predmetov, ki so v tej plasti The line width of the objects contained within this layer - The line width of the objects contained within this layer + Debelina črt predmetov, ki so v tej plasti The draw style of the objects contained within this layer - The draw style of the objects contained within this layer + Slog risbe predmetov, ki so v tej plasti The transparency of the objects contained within this layer - The transparency of the objects contained within this layer + Prozornost predmetov, ki so v tej plasti The line color of the objects contained within this layer, when used on a TechDraw page - The line color of the objects contained within this layer, when used on a TechDraw page + Barva črt predmetov, ki so v tej plasti in uporabljeni na strani Tehnične risbe (TechDraw) @@ -8056,31 +8055,31 @@ the 'First Angle' and 'Last Angle' properties. Spacing between text and dimension line - Spacing between text and dimension line + Razmik med besedilom in kotnico Rotate the dimension text 180 degrees - Rotate the dimension text 180 degrees + Zasukaj kotirno besedilo za 180 stopinj Text Position. Leave '(0,0,0)' for automatic position - Text Position. -Leave '(0,0,0)' for automatic position + Položaj besedila. +Če želite samodejno postavljanje, pustite "(0,0,0)" Text override. Write '$dim' so that it is replaced by the dimension length. - Text override. -Write '$dim' so that it is replaced by the dimension length. + Povozi besedilo. +Če želite, da je nadomeščeno z dolžino kote, vpišite '$dim'. The number of decimals to show - The number of decimals to show + Število prikazanih decimalk @@ -8092,9 +8091,9 @@ Write '$dim' so that it is replaced by the dimension length. A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation - A unit to express the measurement. -Leave blank for system default. -Use 'arch' to force US arch notation + Enota za izražanje mer. +Če želite privzeto, pustite prazno. +Če želite vsiliti anglosaški arhitekturni zapis, uporabite "arch" @@ -8111,31 +8110,31 @@ Use 'arch' to force US arch notation Rotate the dimension arrows 180 degrees - Rotate the dimension arrows 180 degrees + Zasukaj kotirne puščice za 180 stopinj The distance the dimension line is extended past the extension lines - The distance the dimension line is extended -past the extension lines + Dolžina podaljšanja kotnice +preko pomožnih kotnic Length of the extension lines - Length of the extension lines + Dolžina pomožnih kotnic Length of the extension line beyond the dimension line - Length of the extension line -beyond the dimension line + Dolžina pomožne kotnice +preko kotnice Shows the dimension line and arrows - Shows the dimension line and arrows + Prikaže kotnico in puščice diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm b/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm index 300673a730..9ae2244096 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm and b/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts index d848b2a2c5..0dd25f3b3a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts @@ -3216,7 +3216,7 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv Draft - Crtež + Zakošenje @@ -3314,19 +3314,19 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da. - + - - + + - + - + @@ -3335,15 +3335,15 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da. - - - - - + + + + + - - + + @@ -3372,22 +3372,22 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Vidljivost isključena; uklonjeno sa liste: - + image is Null slika je prazna - + filename does not exist on the system or in the resource file naziv datoteke ne postoji na sistemu ili u resursnoj datoteci - + unable to load texture nije moguće učitati teksturu - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4829,8 +4829,8 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Map mode: - - + + @@ -4839,9 +4839,9 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Pogrešan unos: mora biti broj. - - - + + + @@ -4858,13 +4858,13 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Pogrešan unos: mora biti vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Pogrešan unos: mora biti lista, znakovni niz uređenih n-torki ili jedan niz znakova. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Pogrešan unos: mora biti 'Originalno', 'Frenet', ili 'Tangentno'. @@ -4916,7 +4916,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. - + Wrong input: must be a placement, a vector, or a rotation. Pogrešan unos: mora biti položaj, vektor ili rotacija. @@ -4972,7 +4972,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Pogrešan unos: mora biti lista od dva elementa. Na primer, [objekat, 'Ivica1']. - + Wrong input: object has the wrong type. Pogrešan unos: objekat je pogrešnog tipa. @@ -5319,6 +5319,11 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. added missing view properties dodate osobine prikaza koje nedostaju + + + added property 'Count' + added property 'Count' + Workbench @@ -5393,7 +5398,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Draft - Crtež + Zakošenje @@ -7127,7 +7132,7 @@ podesi Tačno za uniju ili Netačno za sastavljeni objekat - + Show the individual array elements (only for Link arrays) Prikaži pojedinačne elemente umnožavanja (samo za umnožavanje veza) @@ -7256,7 +7261,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated Bazni objekat koji će biti dupliran @@ -7319,7 +7324,7 @@ Otherwise the copies will have the same orientation as the original Base object. U suprotnom, kopije će imati istu orijentaciju kao originalni bazni objekat. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7330,54 +7335,54 @@ U suprotnom, kopije će imati istu orijentaciju kao originalni bazni objekat. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Broj kopija u X pravcu - + Number of copies in Y direction Broj kopija u Y pravcu - + Number of copies in Z direction Broj kopija u Z pravcu - + Distance and orientation of intervals in X direction Udaljenost i orijentacija razmaka u X smeru - + Distance and orientation of intervals in Y direction Udaljenost i orijentacija razmaka u Y smeru - + Distance and orientation of intervals in Z direction Udaljenost i orijentacija razmaka u Z smeru - + The axis direction around which the elements in a polar or a circular array will be created Smer ose oko koje će se napraviti elementi prilikom polarnog ili kružnog umnožavanja - + Center point for polar and circular arrays. The 'Axis' passes through this point. Centar polarnog i kružnog umnožavanja. 'Osa' prolazi kroz ovu tačku. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7386,42 +7391,42 @@ Njen položaj i rotacija će se koristiti prilikom polarnog i kružnog umnožava Ostavi ovu osobinu praznom da bi mogao ručno da podesiš 'Osu' i 'Centar'. - + Number of copies in the polar direction Broj kopija u polarnom pravcu - + Distance and orientation of intervals in 'Axis' direction Udaljenost i orijentacija razmaka u smeru 'Ose' - + Angle to cover with copies Ugao po kom treba rasporediti kopije - + Distance between circular layers Rastojanje između prstenova - + Distance between copies in the same circular layer Rastojanje između kopija na pojedinačnom prstenu - + Number of circular layers. The 'Base' object counts as one layer. Broj prstenova. 'Bazni' objekat se računa kao jedan prsten. - + A parameter that determines how many symmetry planes the circular array will have. Parametar koji određuje koliko će ravni simetrije imati kružno umnožavanje. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Ukupan broj elemenata u umnožavanju. diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index bf2448f5ef..7d7abc07df 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 9065e49eda..44129dbcc3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -3216,7 +3216,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Draft - Цртеж + Закошење @@ -3314,19 +3314,19 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + - - + + - + - + @@ -3335,15 +3335,15 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - - - - - + + + + + - - + + @@ -3372,22 +3372,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Видљивост искључена; уклоњено са листе: - + image is Null слика је празна - + filename does not exist on the system or in the resource file назив датотеке не постоји на систему или у ресурсној датотеци - + unable to load texture није могуће учитати текстуру - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4829,8 +4829,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4839,9 +4839,9 @@ The final angle will be the base angle plus this amount. Погрешан унос: мора бити број. - - - + + + @@ -4858,13 +4858,13 @@ The final angle will be the base angle plus this amount. Погрешан унос: мора бити вектор. - + Wrong input: must be a list or tuple of strings, or a single string. Погрешан унос: мора бити листа, знаковни низ уређених н-торки или један низ знакова. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Погрешан унос: мора бити 'Оригинално', 'Френет', или 'Тангентно'. @@ -4916,7 +4916,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Погрешан унос: мора бити положај, вектор или ротација. @@ -4972,7 +4972,7 @@ The final angle will be the base angle plus this amount. Погрешан унос: мора бити листа од два елемента. На пример, [објекат, 'Ивица1']. - + Wrong input: object has the wrong type. Погрешан унос: објекат је погрешног типа. @@ -5122,7 +5122,7 @@ The final angle will be the base angle plus this amount. Edit - Уреди + Измени @@ -5319,6 +5319,11 @@ The final angle will be the base angle plus this amount. added missing view properties додате особине приказа које недостају + + + added property 'Count' + added property 'Count' + Workbench @@ -5393,7 +5398,7 @@ The final angle will be the base angle plus this amount. Draft - Цртеж + Закошење @@ -7127,7 +7132,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Прикажи појединачне елементе умножавања (само за умножавање веза) @@ -7256,7 +7261,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated Базни објекат који ће бити дуплиран @@ -7319,7 +7324,7 @@ Otherwise the copies will have the same orientation as the original Base object. У супротном, копије ће имати исту оријентацију као оригинални базни објекат. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7330,54 +7335,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Кружно: поставља копије у концентричне кружне прстенове око базног објекта. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Број копија у X правцу - + Number of copies in Y direction Број копија у Y правцу - + Number of copies in Z direction Број копија у Z правцу - + Distance and orientation of intervals in X direction Удаљеност и оријентација размака у X смеру - + Distance and orientation of intervals in Y direction Удаљеност и оријентација размака у Y смеру - + Distance and orientation of intervals in Z direction Удаљеност и оријентација размака у Z смеру - + The axis direction around which the elements in a polar or a circular array will be created Смер осе око које ће се направити елементи приликом поларног или кружног умножавања - + Center point for polar and circular arrays. The 'Axis' passes through this point. Центар поларног и кружног умножавања. 'Оса' пролази кроз ову тачку. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7386,42 +7391,42 @@ Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Број копија у поларном правцу - + Distance and orientation of intervals in 'Axis' direction Удаљеност и оријентација размака у смеру 'Осе' - + Angle to cover with copies Угао по ком треба распоредити копије - + Distance between circular layers Растојање између прстенова - + Distance between copies in the same circular layer Растојање између копија на појединачном прстену - + Number of circular layers. The 'Base' object counts as one layer. Број прстенова. 'Базни' објекат се рачуна као један прстен. - + A parameter that determines how many symmetry planes the circular array will have. Параметар који одређује колико ће равни симетрије имати кружно умножавање. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Укупан број елемената у умножавању. diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index 8f0c07dce0..0186810c99 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 79584321c0..e25cdf0a16 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -3309,19 +3309,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3330,15 +3330,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3367,22 +3367,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4824,8 +4824,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4834,9 +4834,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4853,13 +4853,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4911,7 +4911,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4967,7 +4967,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5314,6 +5314,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7122,7 +7127,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7252,7 +7257,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7315,7 +7320,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7326,54 +7331,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7382,42 +7387,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index 199e711d18..2ad0ca4568 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index b990832ea1..67e2b456d6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -3313,19 +3313,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3334,15 +3334,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3371,22 +3371,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4828,8 +4828,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4838,9 +4838,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4857,13 +4857,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4915,7 +4915,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4971,7 +4971,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5318,6 +5318,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7126,7 +7131,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7256,7 +7261,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7319,7 +7324,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7330,54 +7335,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7386,42 +7391,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 9d5afce9ca..8068d79c9c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index b7496f3217..e3bc823546 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -3317,19 +3317,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3338,15 +3338,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3375,22 +3375,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4832,8 +4832,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4842,9 +4842,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4861,13 +4861,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4919,7 +4919,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4975,7 +4975,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5322,6 +5322,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7130,7 +7135,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7260,7 +7265,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7323,7 +7328,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7334,54 +7339,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7390,42 +7395,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index 713e806b21..c9a444385b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 62b77168b2..ae5eac7e43 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -3287,19 +3287,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3308,15 +3308,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3345,22 +3345,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4802,8 +4802,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4812,9 +4812,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4831,13 +4831,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4889,7 +4889,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4945,7 +4945,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5292,6 +5292,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7100,7 +7105,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7230,7 +7235,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7293,7 +7298,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7304,54 +7309,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7360,42 +7365,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm index 151a64881e..2a05612607 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index 11d389ce39..dd36c10c83 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -3315,19 +3315,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3336,15 +3336,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3373,22 +3373,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4830,8 +4830,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4840,9 +4840,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4859,13 +4859,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4917,7 +4917,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4973,7 +4973,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5320,6 +5320,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7128,7 +7133,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7258,7 +7263,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7321,7 +7326,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7332,54 +7337,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7388,42 +7393,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index 4ac8d6235c..550dccebc4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 75f1389f30..ee762d0e14 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -3311,19 +3311,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3332,15 +3332,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3369,22 +3369,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4826,8 +4826,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4836,9 +4836,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4855,13 +4855,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4913,7 +4913,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4969,7 +4969,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5316,6 +5316,11 @@ The final angle will be the base angle plus this amount. added missing view properties 添加缺失的视图属性 + + + added property 'Count' + added property 'Count' + Workbench @@ -7124,7 +7129,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7254,7 +7259,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7317,7 +7322,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7328,54 +7333,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7384,42 +7389,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index 2f1d2fbf40..b29dbbb0e6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index b90aa4b4e4..0ce964d364 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -3312,19 +3312,19 @@ To enabled FreeCAD to download these libraries, answer Yes. - + - - + + - + - + @@ -3333,15 +3333,15 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - + + + + + - - + + @@ -3370,22 +3370,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Visibility off; removed from list: - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4827,8 +4827,8 @@ The final angle will be the base angle plus this amount. Map mode: - - + + @@ -4837,9 +4837,9 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - - - + + + @@ -4856,13 +4856,13 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4914,7 +4914,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4970,7 +4970,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5317,6 +5317,11 @@ The final angle will be the base angle plus this amount. added missing view properties added missing view properties + + + added property 'Count' + added property 'Count' + Workbench @@ -7125,7 +7130,7 @@ set True for fusion or False for compound - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7255,7 +7260,7 @@ they will only be editable by changing the style through the 'Annotation style e - + The base object that will be duplicated The base object that will be duplicated @@ -7318,7 +7323,7 @@ Otherwise the copies will have the same orientation as the original Base object. Otherwise the copies will have the same orientation as the original Base object. - + The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. @@ -7329,54 +7334,54 @@ Otherwise the copies will have the same orientation as the original Base object. - Circular: places the copies in concentric circular layers around the base object. - + Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) - + Number of copies in X direction Number of copies in X direction - + Number of copies in Y direction Number of copies in Y direction - + Number of copies in Z direction Number of copies in Z direction - + Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction - + The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created - + Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. - + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. @@ -7385,42 +7390,42 @@ Its placement, position and rotation, will be used when creating polar and circu Leave this property empty to be able to set 'Axis' and 'Center' manually. - + Number of copies in the polar direction Number of copies in the polar direction - + Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction - + Angle to cover with copies Angle to cover with copies - + Distance between circular layers Distance between circular layers - + Distance between copies in the same circular layer Distance between copies in the same circular layer - + Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. - + A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. - + Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.qm index 3b8df183f2..e4c4fbb3d9 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.ts index 9a882bb3c4..dc9caaac6f 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_be.ts @@ -30,13 +30,13 @@ &Clip - &Зрэз + &Выгляд Inserts a clip group in the active drawing - Уставіць групу зрэзаў у бягучы чарцёж + Уставіць суполку выглядаў у бягучы чарцёж @@ -55,7 +55,7 @@ Inserts a Draft view of the selected object(s) in the active drawing - Уставіць выгляд Чарнавіка абранага аб'екта(аў) у бягучы чарцёж + Уставіць выгляд Чарнавіка абраных аб'ектаў у бягучы чарцёж @@ -490,12 +490,12 @@ Do you want to continue? Show hidden lines - Адлюстраваць схаваныя лініі + Паказаць схаваныя лініі Show smooth lines - Адлюстраваць плыўныя лініі + Паказаць плыўныя лініі @@ -761,7 +761,7 @@ Do you want to continue? Show drawing - Адлюстраваць чарцёж + Паказаць чарцёж diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_be.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_be.qm index 259afe19ef..e8e8c105ef 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_be.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_be.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts index be115e5df7..557abb232b 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Прымяніць змены да канвееру - + Apply changes to parameters directly and not on recompute only... Прымяніць змены да налад напрамую, а не толькі пры пераліку... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Фільтр абрэзкі вобласці - + Define/create a clip filter which uses functions to define the cliped region Вызначыць/стварыць фільтр абрэзкі, які ўжывае функцыі для вызначэння вобласці абрэзкі - + Wrong selection Няправільны выбар - + Select a pipeline, please. Калі ласка, абярыце канвеер. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Функцыя рэзкі фільтра - + Cut the data along an implicit function Рэзаць дадзеныя па няяўнай функцыі @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Фільтр абрэзкі лініі - + Define/create a clip filter which clips a field along a line Вызначыць/стварыць фільтр абрэзкі, які абразае поле наўздоўж лініі @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Дадзеныя ў фільтры абрэзкі кропкі - + Define/create a clip filter which clips a field data at point Вызначыць/стварыць фільтр абрэзкі, які абразае дадзеныя палі ў кропцы @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Функцыі фільтра - + Functions for use in postprocessing filter... Функцыі, якія ўжываюцца ў фільтры пасляапрацоўкі... - + Plane Плоскасць - + Sphere Сфера @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Таўшчыня [mm] - + Stress [MPa] Plot Y-Axis Label Механічнае напружанне [MPa] - + Linearized Stresses Plot title Лінеарызаваныя механічныя напружанні - + Membrane Plot legend item label Мембрана - + Membrane and Bending Plot legend item label Мембрана і выгіб - + Total Plot legend item label Агулам - + Fem Fem - + Stress linearization plot Графік лінеарызацыі механічнага напружання - + Define/create stress linearization plots Вызначае/стварае графікі лінеарызацыі механічнага напружання - - + + Wrong selection Няправільны выбар - - + + Select a Clip filter which clips a STRESS field along a line, please. Калі ласка, абярыце фільтр абрэзкі, які абразае поле механічнага напружання наўздоўж лініі. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Паслаць канвеер з выніку - + Creates a post processing pipeline from a result object Стварае канвеер пасляапрацоўкі з аб'екта выніку - + Wrong selection type Няправільны тып выбару - + Select a result object, please. Калі ласка, абярыце аб'ект выніку. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Скалярны фільтр зрэзу - + Define/create a clip filter which clips a field with a scalar value Вызначае/стварае фільтр зрэзу, які абразае поле са скалярным значэннем @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Фільтр дэфармацыі - + Warp the geometry along a vector field by a certain factor Дэфармаваць геаметрыю наўздоўж вектарнага полю па пэўнаму каэфіцыенту @@ -669,17 +669,17 @@ Стварыць набор вузлоў - + Create filter Стварыць фільтр - + Create function Стварыць функцыю - + Create pipeline from result Стварыць канвеер з выніку @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Стварыць функцыю плоскасці, вызначаную яе пачаткам і напрамкам вектара нармалі - + Create a sphere function, defined by its center and radius Стварыць функцыю сферы, вызначаную яе цэнтрам і радыусам @@ -831,7 +831,7 @@ Analysis defaults - Першапачатковы аналіз + Першапачатковае даследаванне @@ -841,17 +841,17 @@ Default type on analysis - Першапачатковы тып пры аналізе + Першапачатковы тып пры даследаванні Static - Static + Статычны Frequency - Frequency + Частотны @@ -861,12 +861,12 @@ Check Mesh - Check Mesh + Праверыць паліганальную сетку Buckling - Buckling + Дэфармаваны @@ -942,7 +942,7 @@ Beam, shell element 3D output format - Фармат трохмерных вынікаў для бэлек і пакрыццяў + Фармат вываду трохмерных элементаў, такі як бэлька і абалонка @@ -957,7 +957,7 @@ Analysis type (transient or steady state) - Тып аналізу (пераходны ці ўстойлівы стан) + Тып даследавання (пераходны ці ўстойлівы стан) @@ -1163,7 +1163,7 @@ not belonging to faces and faces not belonging to volumes. FEM - FEM + МКЭ (Метад канчатковых элементаў) @@ -1192,7 +1192,7 @@ constraint or material is applied. Working directory for solving analysis and gmsh meshing - Працоўны каталог для аналізу рашэнняў і пабудовы сеткі gmsh + Працоўны каталог для даследавання рашэнняў і пабудовы сеткі gmsh @@ -1247,7 +1247,7 @@ constraint or material is applied. Create mesh groups for analysis reference shapes (highly experimental) - Стварыць суполку паліганальнай сеткі для аналізу апорных фігур (звыш-эксперыментальна) + Стварыць суполку паліганальнай сеткі для даследавання апорных фігур (звыш-эксперыментальна) @@ -1324,7 +1324,7 @@ Specify another file please. Import - Import + Імпарт @@ -1776,7 +1776,7 @@ Specify another file please. Meshing failure - Meshing failure + Збой стварэння паліганальнай сеткі @@ -2028,7 +2028,7 @@ Specify another file please. Viscosity Ratio [1] - Каэфіцыент вязкасці [1] + Каэфіцыент глейкасці [1] @@ -2078,7 +2078,7 @@ Specify another file please. Only planar faces can be picked for 3D - Для трохмернай дэталі можна абраць толькі плоскія грані + Можна абраць толькі плоскія грані для трохмернай дэталі @@ -2412,7 +2412,7 @@ Specify another file please. Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface - Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface + Можна абраць толькі пераўтваральныя грані! Спачатку дадайце абмежаванне зрушэння да паверхні, затым прымяніце абмежаванне да паверхні @@ -2420,7 +2420,7 @@ Specify another file please. TaskObjectName - TaskObjectName + Назва аб'екту @@ -2428,15 +2428,15 @@ Specify another file please. Clip region, choose implicit function - Clip region, choose implicit function + Абрэзаць вобласць, абярыце няяўную функцыю FemGui::TaskPostCut - + Function cut, choose implicit function - Function cut, choose implicit function + Функцыя выразання, абярыце няяўную функцыю @@ -2444,7 +2444,7 @@ Specify another file please. Data along a line options - Data along a line options + Налады дадзеных наўздоўж лініі @@ -2458,12 +2458,12 @@ Specify another file please. Data at point options - Data at point options + Налады дадзеных у кропцы - + %1 at (%2; %3; %4) is: %5 %6 - %1 at (%2; %3; %4) is: %5 %6 + %1 у (%2; %3; %4) складае: %5 %6 @@ -2471,7 +2471,7 @@ Specify another file please. Result display options - Result display options + Налады адлюстравання вынікаў @@ -2479,23 +2479,23 @@ Specify another file please. Implicit function - Implicit function + Няяўная функцыя FemGui::TaskPostScalarClip - + Scalar clip options - Scalar clip options + Налады скалярнага зрэзу FemGui::TaskPostWarpVector - + Warp options - Warp options + Налады дэфармацыі @@ -2503,7 +2503,7 @@ Specify another file please. Tet Parameter - Tet Parameter + Налады тэтраэдра @@ -2511,7 +2511,7 @@ Specify another file please. Activate analysis - Activate analysis + Задзейнічаць даследаванне @@ -2519,12 +2519,12 @@ Specify another file please. Meshing failure - Meshing failure + Збой стварэння паліганальнай сеткі The FEM module is built without NETGEN support. Meshing will not work!!! - The FEM module is built without NETGEN support. Meshing will not work!!! + Модуль МКЭ пабудаваны без падтрымкі Netgen. Пабудова паліганальнай сеткі не спрацуе!!! @@ -2533,7 +2533,7 @@ Specify another file please. FEM material - FEM material + Матэрыял МКЭ @@ -2550,17 +2550,17 @@ Specify another file please. Material card - Material card + Картка матэрыялу choose... - choose... + абярыце... Material name - Material name + Назва матэрыялу @@ -2572,130 +2572,130 @@ Specify another file please. Material Description - Material Description + Апісанне матэрыялу Editing material - Editing material + Змена матэрыялу use FreeCAD material editor - use FreeCAD material editor + Ужываць рэдактар матэрыялу FreeCAD use this task panel - use this task panel + Ужываць гэтую панэль задач Basic Properties - Basic Properties + Асноўныя ўласцівасці Density - Density + Шчыльнасць 0 kg/m^3 - 0 kg/m^3 + 0 кг/м^3 Mechanical Properties - Mechanical Properties + Механічныя ўласцівасці Young's Modulus: - Young's Modulus: + Модуль Юнга: 0 Pa - 0 Pa + 0 Па Poisson Ratio: - Poisson Ratio: + Каэфіцыент Пуасона: Fluidic Properties - Fluidic Properties + Уласцівасці цякучасці Kinematic viscosity: - Kinematic viscosity: + Кінематычная глейкасць: 0 m^2/s - 0 m^2/s + 0 м^2/с Thermal Properties - Thermal Properties + Цеплавыя ўласцівасці Thermal Conductivity: - Thermal Conductivity: + Цеплаправоднасць: 0 W/m/K - 0 W/m/K + 0 Вт/м/К Expansion Coefficient: - Expansion Coefficient: + Каэфіцыент пашырэння: 0 m/m/K - 0 m/m/K + 0 м/м/К Specific Heat: - Specific Heat: + Удзельная цеплаёмістасць: 0 J/kg/K - 0 J/kg/K + 0 Дж/кг/К Vol Expansion Coeff - Vol Expansion Coeff + Каэфіцыент цеплавога пашырэння Matrix Material - Matrix Material + Матэрыял запаўняльнік Choose - Choose + Абраць Properties - Properties + Уласцівасці @@ -2718,7 +2718,7 @@ Specify another file please. Reinforcement Material - Reinforcement Material + Армавальны матэрыял @@ -2731,17 +2731,17 @@ Specify another file please. Fluid Section Parameter - Fluid Section Parameter + Налады падзелу вадкасці Liquid Section Parameter - Liquid Section Parameter + Налады падзелу асяроддзя Pipe Area - Pipe Area + Паверхня трубы @@ -2757,78 +2757,78 @@ Specify another file please. 0 mm^2 - 0 mm^2 + 0 мм^2 Hydraulic Radius - Hydraulic Radius + Гідраўлічны радыус Manning Coefficient - Manning Coefficient + Каэфіцыент Манінга Initial Area - Initial Area + Пачатковая вобласць Enlarged Area - Enlarged Area + Павялічаная вобласць Contracted Area - Contracted Area + Паменшаная вобласць Inlet Pressure - Inlet Pressure + Уваходны ціск Pressure - Pressure + Ціск 0 MPa - 0 MPa + 0 МПа Inlet Mass Flow Rate - Inlet Mass Flow Rate + Уваходны масавы паток Mass flow rate - Mass flow rate + Масавы паток 0 kg/s - 0 kg/s + 0 кг/с Outlet Pressure - Outlet Pressure + Выходны ціск Outlet Mass Flow Rate - Outlet Mass Flow Rate + Выходны масавы паток @@ -2837,77 +2837,77 @@ Specify another file please. Pipe Area - Pipe Area + Паверхня трубы Entrance Area - Entrance Area + Уваходная вобласць Diaphragm Area - Diaphragm Area + Вобласць дыяфрагмы Bend Radius/Pipe Diameter - Bend Radius/Pipe Diameter + Радыус выгібу/Дыяметр трубы Bend Angle - Bend Angle + Вугал выгібу Head loss coefficient - Head loss coefficient + Каэфіцыент перападу ціску Gate valve closing coefficient - Gate valve closing coefficient + Каэфіцыент закрыцця клапана Pump Characteristic - Pump Characteristic + Характарыстыка насоса Flow rate [mm^3/s] - Flow rate [mm^3/s] + Хуткасць патоку [мм^3/с] Head Loss[mm] - Head Loss[mm] + Перапад ціску [мм] Grain diameter - Grain diameter + Дыяметр збожжа Cross section form factor - Cross section form factor + Каэфіцыент формы папярочнага перасеку Gas Section Parameter - Gas Section Parameter + Налады падзелу газа Open Channel Section Parameter - Open Channel Section Parameter + Налада перасеку канала на вольнай паверхні Tie parameter - Tie parameter + Налада прывязкі @@ -2928,12 +2928,12 @@ Specify another file please. Tolerance: - Tolerance: + Дакладнасць: Centrif parameter - Centrif parameter + Налада цэнтрыфугавання @@ -2947,27 +2947,27 @@ Specify another file please. Rotation frequency f<sub>rot</sub> [rps] - Rotation frequency f<sub>rot</sub> [rps] + Частата вярчэння f<sub>вярчэння</sub> [аб/с] revolutions per second - revolutions per second + абаротаў у секунду 0 1/s - 0 1/s + 0 1/с 1/s - 1/s + 1/с SectionPrint parameter - SectionPrint parameter + Налада вынікаў падзелу @@ -2975,9 +2975,10 @@ Specify another file please. + Constraint Properties - Constraint Properties + Уласцівасці абмежавання @@ -2989,63 +2990,191 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance - Counter of the body (or face) with a capacitance + Лічыльнік цела (ці грані) з ёмістасцю @@ -3197,6 +3326,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3290,12 +3496,12 @@ Specify another file please. No active Analysis - No active Analysis + Без бягучых даследаванняў You need to create or activate a Analysis - You need to create or activate a Analysis + Вам неабходна стварыць ці задзейнічаць даследаванне @@ -3319,7 +3525,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3331,7 +3537,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3355,7 +3561,7 @@ Specify another file please. FEM - FEM + МКЭ (Метад канчатковых элементаў) @@ -3467,7 +3673,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3487,7 +3693,7 @@ Specify another file please. None - None + Нічога @@ -3527,7 +3733,7 @@ Specify another file please. Max Shear Stress (Tresca) - Max Shear Stress (Tresca) + Найбольшы крытэрый зруху (Tresca) @@ -3716,7 +3922,7 @@ For possible variables, see the description box below. Mechanical analysis - Mechanical analysis + Механічнае даследаванне @@ -3726,17 +3932,17 @@ For possible variables, see the description box below. Analysis type - Analysis type + Тып даследавання Static - Static + Статычны Frequency - Frequency + Частотны @@ -3746,12 +3952,12 @@ For possible variables, see the description box below. Check Mesh - Check Mesh + Праверыць паліганальную сетку Buckling - Buckling + Дэфармаваны @@ -3813,14 +4019,13 @@ For possible variables, see the description box below. The analysis is not empty, therefore the following referencing objects might be lost: - The analysis is not empty, therefore the -following referencing objects might be lost: + Даследаванне не з'яўляецца пустым, таму наступныя спасылачныя аб'екты могуць быць страчаныя: - + Object dependencies Object dependencies @@ -3832,7 +4037,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -3856,7 +4061,7 @@ following referencing objects might be lost: Meshes: - Meshes: + Сетак: @@ -4106,7 +4311,7 @@ following referencing objects might be lost: Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -4184,7 +4389,7 @@ following referencing objects might be lost: Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -4217,7 +4422,7 @@ following referencing objects might be lost: Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -4322,7 +4527,7 @@ normal vector of the face is used as direction Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -4372,7 +4577,7 @@ normal vector of the face is used as direction Select multiple face(s), click Add or Remove: - Select multiple face(s), click Add or Remove: + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць: @@ -4472,7 +4677,7 @@ normal vector of the face is used as direction Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -4487,12 +4692,12 @@ normal vector of the face is used as direction Pressure - Pressure + Ціск 0 MPa - 0 MPa + 0 МПа @@ -4510,7 +4715,7 @@ normal vector of the face is used as direction Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -4543,7 +4748,7 @@ normal vector of the face is used as direction Select multiple face(s), click Add or Remove - Select multiple face(s), click Add or Remove + Абярыце некалькі граняў, націсніце кнопку Дадаць ці Выдаліць @@ -5037,12 +5242,12 @@ normal vector of the face is used as direction FEM - FEM + МКЭ (Метад канчатковых элементаў) &FEM - &МКЭ (Метад канчатковых элементаў) + &МКЭ @@ -5193,20 +5398,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5216,12 +5421,12 @@ normal vector of the face is used as direction Analysis container - Analysis container + Кантэйнер для даследавання Creates an analysis container with standard solver CalculiX - Creates an analysis container with standard solver CalculiX + Стварае кантэйнер даследавання з стандартным рашальнікам CalculiX @@ -5229,12 +5434,12 @@ normal vector of the face is used as direction Clipping plane on face - Clipping plane on face + Плоскасць перасеку на грані Add a clipping plane on a selected face - Add a clipping plane on a selected face + Дадае плоскасць перасеку на абранай грані @@ -5243,7 +5448,7 @@ normal vector of the face is used as direction Remove all clipping planes - Remove all clipping planes + Выдаліць усе плоскасці перасеку @@ -5340,12 +5545,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5353,12 +5558,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5366,12 +5571,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5379,12 +5584,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5392,12 +5597,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5405,12 +5610,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5418,12 +5623,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5431,12 +5636,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5444,12 +5649,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5457,12 +5662,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5470,12 +5675,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5483,12 +5688,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5496,12 +5701,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5509,8 +5714,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5518,12 +5723,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5531,12 +5736,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5544,12 +5749,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5557,12 +5762,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) - Reinforced material (concrete) + Арміраваны матэрыял (бетон) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5570,12 +5775,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5583,12 +5788,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5596,12 +5801,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5609,12 +5814,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5622,8 +5827,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5631,12 +5836,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5644,12 +5849,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5657,12 +5862,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5670,12 +5875,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5683,12 +5888,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Show result - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5696,25 +5901,25 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis - Purges all results from active analysis + Ачысціць усе вынікі актыўнага даследавання FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5722,25 +5927,25 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) - Solver CalculiX (new framework) + Рашальнік CalculiX (новы фрэймворк) - + Creates a FEM solver CalculiX new framework (less result error handling) - Creates a FEM solver CalculiX new framework (less result error handling) + Стварае новы фреймворк рашальніка МКЭ CalculiX (менш апрацоўкі памылак у выніку) FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5748,12 +5953,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5761,12 +5966,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5774,12 +5979,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5787,12 +5992,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -5874,7 +6079,7 @@ normal vector of the face is used as direction To add references: select them in the 3D view and click "Add". - To add references: select them in the 3D view and click "Add". + Каб дадаць апорныя элементы: абярыце іх у трохмерным прадстаўленні і націсніце "Дадаць". @@ -6035,12 +6240,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6068,19 +6273,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm index a3db9be655..e3c3037555 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index 0b45c91616..a86a7e1947 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selecció incorrecta - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Pla - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Selecció incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -792,7 +792,7 @@ Search in known binary directories - Search in known binary directories + Cerca en directoris binaris coneguts @@ -1034,7 +1034,7 @@ Specify another file please. Search in known binary directories - Search in known binary directories + Cerca en directoris binaris coneguts @@ -1287,7 +1287,7 @@ constraint or material is applied. Search in known binary directories - Search in known binary directories + Cerca en directoris binaris coneguts @@ -1469,7 +1469,7 @@ If unchecked, they will be sorted by their name. Search in known binary directories - Search in known binary directories + Cerca en directoris binaris coneguts @@ -1523,7 +1523,7 @@ Specify another file please. Search in known binary directories - Search in known binary directories + Cerca en directoris binaris coneguts @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2578,7 +2578,7 @@ Specify another file please. TextLabel - Etiqueta de Text + Etiqueta de text @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Segur que voleu continuar? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Dependències de l'objecte @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -3920,7 +4126,7 @@ following referencing objects might be lost: Angle-search - Cerca per angle + Cerca d'angles @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Mostra el resultat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm index 88c42b2148..16aa0eec67 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index bc98711664..a29780f127 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Neplatný výběr - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Rovina - + Sphere Koule @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Tloušťka [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Neplatný výběr - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Chcete zavřít tento dialog? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Opravdu si přejete pokračovat? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Závislosti objektu @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Zobrazit výsledek - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm index 608f4e1f23..a4b7072b2c 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 8a6c7c22ef..406ce7f918 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Änderungen auf Pipeline anwenden - + Apply changes to parameters directly and not on recompute only... Parameter-Änderungen direkt anwenden und nicht nur bei Neuberechnung... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region Ausschnitt-Filter - + Define/create a clip filter which uses functions to define the cliped region Definiere/Erstelle einen Ausschnitt-Filter, der Funktionen verwendet um die ausgeschnitte Region zu definieren - + Wrong selection Falsche Auswahl - + Select a pipeline, please. Bitte eine Pipeline auswählen. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Funktion Schnitt-Filter - + Cut the data along an implicit function Schneiden Sie die Daten entlang einer impliziten Funktion @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Linie Ausschnitt-Filter - + Define/create a clip filter which clips a field along a line Definieren/Erstellen eines Clip-Filters, der ein Feld entlang einer Linie ausschneidet @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Daten zu Punkt Ausschnits-Filter - + Define/create a clip filter which clips a field data at point Definiere/Erstelle einen Ausschnitt-Filter, der einen Datenpunkt aus einem Feld ausschneidet @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filterfunktionen - + Functions for use in postprocessing filter... Funktionen zur Verwendung in Nachbearbeitungs-Filter... - + Plane Ebene - + Sphere Kugel @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Dicke [mm] - + Stress [MPa] Plot Y-Axis Label Spannung [MPa] - + Linearized Stresses Plot title Linearisierte Spannungen - + Membrane Plot legend item label Membran - + Membrane and Bending Plot legend item label Membran und Biegung - + Total Plot legend item label Summe - + Fem Fem - + Stress linearization plot Linearisierte Spannungsdarstellung - + Define/create stress linearization plots Linearisierte Spannungsdarstellung definieren/erstellen - - + + Wrong selection Falsche Auswahl - - + + Select a Clip filter which clips a STRESS field along a line, please. Bitte einen einen Ausschnitt-Filter auswählen, der ein Spannungs-Feld entlang einer Linie ausschneidet. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Nachbearbeitungs-Pipeline aus Ergebnis - + Creates a post processing pipeline from a result object Erstellt eine Nachbearbeitungs-Pipeline aus einem Ergebnisobjekt - + Wrong selection type Falscher Auswahl-Typ - + Select a result object, please. Bitte ein Ergebnisobjekt auswählen. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Skalar Ausschnitt-Filter - + Define/create a clip filter which clips a field with a scalar value Definiere/Erstelle einen Ausschnitt-Filter, der ein Feld mit einem skalaren Wert ausschneidet @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Verformungsfilter - + Warp the geometry along a vector field by a certain factor Geometrie um einen bestimmten Faktor entlang eines Vektorfeldes verformen @@ -669,17 +669,17 @@ Knotenpunktsatz erstellen - + Create filter Filter erstellen - + Create function Funktion erstellen - + Create pipeline from result Pipeline aus Ergebnis erzeugen @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Erstelle eine Ebenenfunktion, definiert durch Ursprung und Normale - + Create a sphere function, defined by its center and radius Erstelle eine Kugelfunktion, definiert durch Mittelpunkt und Radius @@ -2423,7 +2423,7 @@ Bitte eine andere Datei angeben. FemGui::TaskPostCut - + Function cut, choose implicit function Funktionsschnitt, implizite Funktion wählen @@ -2450,7 +2450,7 @@ Bitte eine andere Datei angeben. Daten an Punkt Optionen - + %1 at (%2; %3; %4) is: %5 %6 %1 bei (%2; %3; %4) ist: %5 %6 @@ -2474,7 +2474,7 @@ Bitte eine andere Datei angeben. FemGui::TaskPostScalarClip - + Scalar clip options Skalar-Ausschnitt-Optionen @@ -2482,7 +2482,7 @@ Bitte eine andere Datei angeben. FemGui::TaskPostWarpVector - + Warp options Verformungsoptionen @@ -2964,6 +2964,7 @@ Bitte eine andere Datei angeben. + Constraint Properties Randbedingungs-Eigenschaften @@ -2978,61 +2979,189 @@ Bitte eine andere Datei angeben. Potential: Potential: - - - Electric potential in V - Elektrisches Potenzial in V - - + + + + + + + + + + + + + + + + + + + + unspecified unbestimmt + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Skalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potenzial Konstante - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Fernfeld / Elektrische Unendlichkeit - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Elektrische Kraft berechnen - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Kapazitätskörper: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3184,7 +3313,84 @@ Bitte eine andere Datei angeben. Current density: - Current density: + Aktuelle Dichte: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3308,7 +3514,7 @@ Bitte eine andere Datei angeben. - + A dialog is already open in the task panel Im Aufgabenbereich ist bereits ein Dialog geöffnet @@ -3320,7 +3526,7 @@ Bitte eine andere Datei angeben. - + Do you want to close this dialog? Möchten Sie dieses Dialogfeld schließen? @@ -3456,7 +3662,7 @@ Bitte eine andere Datei angeben. - + Are you sure you want to continue? Bist du sicher, dass du fortfahren möchtest? @@ -3809,7 +4015,7 @@ folgenden referenzierenden Objekte verloren gehen: - + Object dependencies Objektabhängigkeiten @@ -3821,7 +4027,7 @@ following referencing objects might be lost: folgenden referenzierenden Objekte verloren gehen: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5182,20 +5388,20 @@ Normalenvektors der Fläche wird als Richtung verwendet setupFilter - + Error: A filter can only be applied to a single object. Fehler: Ein Filter kann nur auf ein einzelnes Objekt angewandt werden. - - - + + + The filter could not be set up. Der Filter konnte nicht eingerichtet werden. - - + + Error: no post processing object selected. Fehler: Kein Objekt zur Nachbearteitung ausgewählt. @@ -5329,12 +5535,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5342,12 +5548,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ConstraintSelfWeight - + Constraint self weight Randbedingung Eigengewicht - + Creates a FEM constraint self weight Erzeugt eine FEM-Randbedingung Eigengewicht @@ -5355,12 +5561,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5368,12 +5574,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5381,12 +5587,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5394,12 +5600,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5407,12 +5613,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5420,12 +5626,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5433,12 +5639,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5446,12 +5652,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5459,12 +5665,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5472,12 +5678,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_EquationElectricforce - + Electricforce equation Gleichung für elektrische Kraft - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5485,12 +5691,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5498,8 +5704,8 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5507,12 +5713,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5520,12 +5726,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5533,12 +5739,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5546,12 +5752,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5559,12 +5765,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5572,12 +5778,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5585,12 +5791,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5598,12 +5804,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5611,8 +5817,8 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5620,12 +5826,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5633,12 +5839,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5646,12 +5852,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5659,12 +5865,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5672,12 +5878,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ResultShow - + Show result Ergebnis anzeigen - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5685,12 +5891,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5698,12 +5904,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5711,12 +5917,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5724,12 +5930,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5737,12 +5943,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5750,12 +5956,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5763,12 +5969,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5776,12 +5982,12 @@ Normalenvektors der Fläche wird als Richtung verwendet FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6013,23 +6219,23 @@ Please select a result type first. Constraint current density - Constraint current density + Randbedingung Aktuelle Dichte Creates a FEM constraint current density - Creates a FEM constraint current density + Erstellt eine FEM-Randbedingung Aktuelle Dichte FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6046,30 +6252,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + Elektromagnetische Randbedingungen... Electromagnetic constraints - Electromagnetic constraints + Elektromagnetische Randbedingungen CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Elektromagnetische Gleichungen für den Gleichungslöser Elmer + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm index d429b04580..12806b6091 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 5221ba142d..67d31a0925 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Λάθος επιλογή - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Φίλτρο κοπής λειτουργίας - + Cut the data along an implicit function Κόψτε τα δεδομένα κατά μήκος μιας έμμεσης συνάρτησης @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Ορίστε/δημιουργήστε ένα φίλτρο που κόβει ένα πεδίο κατά μήκος μιας γραμμής @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Επίπεδο - + Sphere Σφαίρα @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Πάχος [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Σύνολο - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Λάθος επιλογή - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Θέση αγωγού από αποτέλεσμα - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Δημιουργία φίλτρου - + Create function Δημιουργία συνάρτησης - + Create pipeline from result Create pipeline from result @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2442,7 +2442,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2469,7 +2469,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2493,7 +2493,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2501,7 +2501,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2983,6 +2983,7 @@ Specify another file please. + Constraint Properties Ιδιότητες Περιορισμού @@ -2997,61 +2998,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3205,6 +3334,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3327,7 +3533,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3339,7 +3545,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3475,7 +3681,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3828,7 +4034,7 @@ following referencing objects might be lost: - + Object dependencies Εξαρτήσεις αντικειμένου @@ -3840,7 +4046,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5201,20 +5407,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5348,12 +5554,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5361,12 +5567,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5374,12 +5580,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5387,12 +5593,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5400,12 +5606,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5413,12 +5619,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5426,12 +5632,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5439,12 +5645,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5452,12 +5658,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5465,12 +5671,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5478,12 +5684,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5491,12 +5697,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Εξίσωση ηλεκτρισμού - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5504,12 +5710,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5517,8 +5723,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5526,12 +5732,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5539,12 +5745,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5552,12 +5758,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5565,12 +5771,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5578,12 +5784,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5591,12 +5797,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5604,12 +5810,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5617,12 +5823,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5630,8 +5836,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5639,12 +5845,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5652,12 +5858,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5665,12 +5871,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5678,12 +5884,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5691,12 +5897,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Εμφανίστε το αποτέλεσμα - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5704,12 +5910,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5717,12 +5923,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5730,12 +5936,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5743,12 +5949,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5756,12 +5962,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5769,12 +5975,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5782,12 +5988,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5795,12 +6001,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6043,12 +6249,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6076,19 +6282,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm index bc16579d43..7fb9213a53 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts index 1de9d11ab9..d99be0eaed 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem FEM - + Apply changes to pipeline Aplicar cambios a tubería - + Apply changes to parameters directly and not on recompute only... Aplicar cambios a los parámetros directamente y no sólo en el recálculo... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem FEM - + Region clip filter Filtro de región de recorte - + Define/create a clip filter which uses functions to define the cliped region Definir/crear un filtro de clip que utiliza funciones para definir la región recortada - + Wrong selection Selección Incorrecta - + Select a pipeline, please. Seleccionar una tubería, por favor. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem FEM - + Function cut filter Filtro de corte de función - + Cut the data along an implicit function Cortar los datos a lo largo de una función implícita @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem FEM - + Line clip filter Filtro de recorte de línea - + Define/create a clip filter which clips a field along a line Definir/crear un filtro de recorte que recorta un campo a lo largo de una línea @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem FEM - + Data at point clip filter Filtro de datos en el clip de punto - + Define/create a clip filter which clips a field data at point Definir/crear un filtro de clip que recorte un campo de datos en el punto @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem FEM - + Filter functions Funciones de filtro - + Functions for use in postprocessing filter... Funciones para uso en el filtro de postprocesamiento... - + Plane Plano - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Espesor [mm] - + Stress [MPa] Plot Y-Axis Label Esfuerzo [MPa] - + Linearized Stresses Plot title Esfuerzos linealizados - + Membrane Plot legend item label Membrana - + Membrane and Bending Plot legend item label Membrana y flexión - + Total Plot legend item label Total - + Fem FEM - + Stress linearization plot Gráfica de linearización de esfuerzo - + Define/create stress linearization plots Definir/crear gráficas de linearización de esfuerzo - - + + Wrong selection Selección Incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Seleccione un filtro de clip que recorra un campo de ESFUERZO a lo largo de una línea, por favor. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem FEM - + Post pipeline from result Publicar tubería del resultado - + Creates a post processing pipeline from a result object Crea una tubería de post-procesamiento a partir de un objeto resultado - + Wrong selection type Tipo de selección incorrecta - + Select a result object, please. Seleccione un objeto de resultado, por favor. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem FEM - + Scalar clip filter Filtro de clip escalar - + Define/create a clip filter which clips a field with a scalar value Definir/crear un filtro de clip que recorte un campo con un valor escalar @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem FEM - + Warp filter Filtro de deformación - + Warp the geometry along a vector field by a certain factor Deformar la geometría a lo largo de un campo vectorial por un factor determinado @@ -669,17 +669,17 @@ Crear conjunto de nodos - + Create filter Crear filtro - + Create function Crear función - + Create pipeline from result Crear tubería desde resultado @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Crear un plano de función, definida por su origen y normal - + Create a sphere function, defined by its center and radius Crear una función de esfera, definida por su centro y radio @@ -1095,21 +1095,21 @@ Por favor, especifique otro archivo. FEM Elmer: Not suitable for multithreading - FEM Elmer: Not suitable for multithreading + FEM Elmer: No apto para hilos múltiples Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi.exe' is required. - Wrong Elmer setting: You use more than one CPU core. -Therefore an executable with the suffix '_mpi.exe' is required. + Configuración de Elmer incorrecta: Utiliza más de un núcleo de CPU. +Por lo tanto se requiere un ejecutable con el sufijo '_mpi.exe'. Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi' is required. - Wrong Elmer setting: You use more than one CPU core. -Therefore an executable with the suffix '_mpi' is required. + Configuración de Elmer incorrecta: Utiliza más de un núcleo de CPU. +Por lo tanto se requiere un ejecutable con el sufijo '_mpi'. @@ -2444,7 +2444,7 @@ Especifique otro archivo, por favor. FemGui::TaskPostCut - + Function cut, choose implicit function Función cortada, elegir función implícita @@ -2471,7 +2471,7 @@ Especifique otro archivo, por favor. Opciones de datos de punto - + %1 at (%2; %3; %4) is: %5 %6 %1 en (%2; %3; %4) es: %5 %6 @@ -2495,7 +2495,7 @@ Especifique otro archivo, por favor. FemGui::TaskPostScalarClip - + Scalar clip options Opciones de clip escalar @@ -2503,7 +2503,7 @@ Especifique otro archivo, por favor. FemGui::TaskPostWarpVector - + Warp options Opciones de deformación @@ -2985,6 +2985,7 @@ Especifique otro archivo, por favor. + Constraint Properties Propiedades de Restricción @@ -2999,61 +3000,189 @@ Especifique otro archivo, por favor. Potential: Potential: - - - Electric potential in V - Potencial eléctrico en V - - + + + + + + + + + + + + + + + + + + + + unspecified no especificado + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Escalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Si la restricción define un potencial constante - + Potential Constant Constante de Potencial - + Whether the constraint defines a farfield potential Si la restricción define un potencial de campo lejano - + Farfield / Electric infinity Farfield / Infinidad eléctrica - + Whether the constraint is for the electric force Si la restricción es para la fuerza eléctrica - + Calculate Electric Force Calcular Fuerza Eléctrica - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacidad de Cuerpo: - + Counter of the body (or face) with a capacitance Contador del cuerpo (o cara) con una capacitancia @@ -3205,7 +3334,84 @@ Especifique otro archivo, por favor. Current density: - Current density: + Densidad de corriente: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3329,7 +3535,7 @@ Especifique otro archivo, por favor. - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas @@ -3341,7 +3547,7 @@ Especifique otro archivo, por favor. - + Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3477,7 +3683,7 @@ Especifique otro archivo, por favor. - + Are you sure you want to continue? ¿Estás seguro/a de que quieres continuar? @@ -3830,7 +4036,7 @@ siguiente objeto de referencia podría perderse: - + Object dependencies Dependencias del objeto @@ -3842,7 +4048,7 @@ following referencing objects might be lost: siguiente objeto de referencia podría perderse: - + The pipeline is not empty, therefore the following referencing objects might be lost: El pipeline no está vacío, por lo tanto el @@ -5203,20 +5409,20 @@ normal de la cara se utiliza como dirección setupFilter - + Error: A filter can only be applied to a single object. Error: Un filtro sólo se puede aplicar a un solo objeto. - - - + + + The filter could not be set up. No se pudo configurar el filtro. - - + + Error: no post processing object selected. Error: no se ha seleccionado ningún objeto de post-procesamiento. @@ -5226,12 +5432,12 @@ normal de la cara se utiliza como dirección Analysis container - Analysis container + Contenedor de análisis Creates an analysis container with standard solver CalculiX - Creates an analysis container with standard solver CalculiX + Crea un contenedor de análisis con el solver estándar CalculiX @@ -5239,12 +5445,12 @@ normal de la cara se utiliza como dirección Clipping plane on face - Clipping plane on face + Plano de recorte en la cara Add a clipping plane on a selected face - Add a clipping plane on a selected face + Agregar un plano de recorte en una cara seleccionada @@ -5253,7 +5459,7 @@ normal de la cara se utiliza como dirección Remove all clipping planes - Remove all clipping planes + Eliminar todos los planos de recorte @@ -5266,7 +5472,7 @@ normal de la cara se utiliza como dirección Creates a FEM constant vacuum permittivity to overwrite standard value - Creates a FEM constant vacuum permittivity to overwrite standard value + Crea un permitividad de vacío constante FEM para sobrescribir el valor estándar @@ -5274,12 +5480,12 @@ normal de la cara se utiliza como dirección Constraint body heat source - Constraint body heat source + Restringir fuente de calor del cuerpo Creates a FEM constraint body heat source - Creates a FEM constraint body heat source + Crea una restricción FEM de cuerpo fuente de calor @@ -5287,12 +5493,12 @@ normal de la cara se utiliza como dirección Constraint centrif - Constraint centrif + Restricción de centrifugado Creates a FEM constraint centrif - Creates a FEM constraint centrif + Crea una restricción FEM de centrifugado @@ -5300,12 +5506,12 @@ normal de la cara se utiliza como dirección Constraint electrostatic potential - Constraint electrostatic potential + Restricción de potencial electrostático Creates a FEM constraint electrostatic potential - Creates a FEM constraint electrostatic potential + Crea una restricción FEM de potencial electroestático @@ -5313,12 +5519,12 @@ normal de la cara se utiliza como dirección Constraint flow velocity - Constraint flow velocity + Restricción de velocidad de flujo Creates a FEM constraint flow velocity - Creates a FEM constraint flow velocity + Crea una restricción FEM de velocidad de flujo @@ -5326,12 +5532,12 @@ normal de la cara se utiliza como dirección Constraint initial flow velocity - Constraint initial flow velocity + Restricción de velocidad inicial de flujo Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Crea una restricción FEM de velocidad inicial de flujo @@ -5339,49 +5545,49 @@ normal de la cara se utiliza como dirección Constraint initial pressure - Constraint initial pressure + Restricción de presión inicial Creates a FEM constraint initial pressure - Creates a FEM constraint initial pressure + Crea una restricción FEM de presión inicial FEM_ConstraintSectionPrint - + Constraint sectionprint - Constraint sectionprint + Restricción de la sección de impresión - + Creates a FEM constraint sectionprint - Creates a FEM constraint sectionprint + Crea una restricción FEM de sección de impresión FEM_ConstraintSelfWeight - + Constraint self weight - Constraint self weight + Restricción de peso propio - + Creates a FEM constraint self weight - Creates a FEM constraint self weight + Crea una restricción FEM de peso propio FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5389,177 +5595,177 @@ normal de la cara se utiliza como dirección FEM_ElementFluid1D - + Fluid section for 1D flow - Fluid section for 1D flow + Sección de fluido para flujo en 1D - + Creates a FEM fluid section for 1D flow - Creates a FEM fluid section for 1D flow + Crea una sección de fluido FEM para un flujo de 1D FEM_ElementGeometry1D - + Beam cross section - Beam cross section + Sección transversal de la viga - + Creates a FEM beam cross section - Creates a FEM beam cross section + Crear una sección transversal de viga FEM FEM_ElementGeometry2D - + Shell plate thickness - Shell plate thickness + Espesor de placa de caparazón - + Creates a FEM shell plate thickness - Creates a FEM shell plate thickness + Crea un espesor de placa de caparazón FEM FEM_ElementRotation1D - + Beam rotation - Beam rotation + Rotación de la viga - + Creates a FEM beam rotation - Creates a FEM beam rotation + Crea una rotación de la viga FEM FEM_EquationElectrostatic - + Electrostatic equation - Electrostatic equation + Ecuación electrostática - + Creates a FEM equation for electrostatic - Creates a FEM equation for electrostatic + Crea una ecuación FEM para electrostática FEM_EquationElasticity - + Elasticity equation - Elasticity equation + Ecuación de elasticidad - + Creates a FEM equation for elasticity - Creates a FEM equation for elasticity + Crea una ecuación FEM para elasticidad FEM_EquationFlow - + Flow equation - Flow equation + Ecuación de flujo - + Creates a FEM equation for flow - Creates a FEM equation for flow + Crea una ecuación MEF para flujo FEM_EquationFlux - + Flux equation - Flux equation + Ecuación de flujo - + Creates a FEM equation for flux - Creates a FEM equation for flux + Crea una ecuación MEF para flujo FEM_EquationElectricforce - + Electricforce equation Ecuación de la Fuerza Eléctrica - + Creates a FEM equation for electric forces - Creates a FEM equation for electric forces + Crea una ecuación FEM para fuerzas eléctricas FEM_EquationHeat - + Heat equation - Heat equation + Ecuación de calor - + Creates a FEM equation for heat - Creates a FEM equation for heat + Crea una ecuación FEM para el calor FEM_Examples - - + + Open FEM examples - Open FEM examples + Abre ejemplos de FEM FEM_MaterialEditor - + Material editor - Material editor + Editor de materiales - + Opens the FreeCAD material editor - Opens the FreeCAD material editor + Abrir el editor de materiales de FreeCAD FEM_MaterialFluid - + Material for fluid - Material for fluid + Material para fluído - + Creates a FEM material for fluid - Creates a FEM material for fluid + Crea un material FEM para fluido FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material - Nonlinear mechanical material + Material mecánico no lineal - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5567,12 +5773,12 @@ normal de la cara se utiliza como dirección FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5580,12 +5786,12 @@ normal de la cara se utiliza como dirección FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5593,12 +5799,12 @@ normal de la cara se utiliza como dirección FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5606,12 +5812,12 @@ normal de la cara se utiliza como dirección FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5619,12 +5825,12 @@ normal de la cara se utiliza como dirección FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5632,8 +5838,8 @@ normal de la cara se utiliza como dirección FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5641,12 +5847,12 @@ normal de la cara se utiliza como dirección FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5654,12 +5860,12 @@ normal de la cara se utiliza como dirección FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5667,64 +5873,64 @@ normal de la cara se utiliza como dirección FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher - Create a FEM mesh from a solid or face shape by Netgen internal mesher + Crear una malla FEM desde una forma sólida o cara mediante el creador de mallas interno de Netgen FEM_MeshRegion - + FEM mesh region - FEM mesh region + Región de malla FEM - + Creates a FEM mesh region - Creates a FEM mesh region + Crear una región de malla FEM FEM_ResultShow - + Show result Mostrar resultado - + Shows and visualizes selected result data - Shows and visualizes selected result data + Muestra y visualiza los datos de resultados seleccionados FEM_ResultsPurge - + Purge results - Purge results + Purgar resultados - + Purges all results from active analysis - Purges all results from active analysis + Purga todos los resultados de los análisis activos FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5732,12 +5938,12 @@ normal de la cara se utiliza como dirección FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5745,12 +5951,12 @@ normal de la cara se utiliza como dirección FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5758,12 +5964,12 @@ normal de la cara se utiliza como dirección FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5771,12 +5977,12 @@ normal de la cara se utiliza como dirección FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5784,12 +5990,12 @@ normal de la cara se utiliza como dirección FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5797,12 +6003,12 @@ normal de la cara se utiliza como dirección FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -5858,7 +6064,7 @@ normal de la cara se utiliza como dirección Abort - Abort + Abortar @@ -5892,7 +6098,7 @@ normal de la cara se utiliza como dirección Select Solids - Select Solids + Seleccionar sólidos @@ -5963,7 +6169,7 @@ normal de la cara se utiliza como dirección Max Shear Stress - Max Shear Stress + Estrés máximo de corte @@ -6004,13 +6210,13 @@ normal de la cara se utiliza como dirección No histogram available. Please select a result type first. - No histogram available. -Please select a result type first. + No hay histograma disponible. +Por favor, primero seleccione un tipo de resultado. Histogram of {} - Histogram of {} + Histograma de {} @@ -6020,13 +6226,13 @@ Please select a result type first. Empty result mesh - Empty result mesh + Malla resultante vacía No result object - No result object + Ningún objeto resultante @@ -6034,27 +6240,26 @@ Please select a result type first. Constraint current density - Constraint current density + Restringir densidad actual Creates a FEM constraint current density - Creates a FEM constraint current density + Crear una restricción FEM de densidad de corriente FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + Ecuación Magnetodinámica2D - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Crear una ecuación FEM para fuerzas magnetodinámicas en 2D @@ -6067,30 +6272,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + Restricciones electromagnéticas... Electromagnetic constraints - Electromagnetic constraints + Restricciones electromagnéticas CmdFEMCompEmEquations - + Fem FEM - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Ecuaciones electromagnéticas para el solucionador Elmer + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm index 15997af8a3..eb8ce3c897 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index aa55842a3d..2d1dd5b773 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem FEM - + Apply changes to pipeline Aplicar cambios a tubería - + Apply changes to parameters directly and not on recompute only... Aplicar cambios a los parámetros directamente y no sólo en el recálculo... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem FEM - + Region clip filter Filtro de región de recorte - + Define/create a clip filter which uses functions to define the cliped region Definir/crear un filtro de clip que utiliza funciones para definir la región recortada - + Wrong selection Selección incorrecta - + Select a pipeline, please. Seleccionar una tubería, por favor. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem FEM - + Function cut filter Filtro de corte de función - + Cut the data along an implicit function Cortar los datos a lo largo de una función implícita @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem FEM - + Line clip filter Filtro de recorte de línea - + Define/create a clip filter which clips a field along a line Definir/crear un filtro de recorte que recorta un campo a lo largo de una línea @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem FEM - + Data at point clip filter Filtro de datos en el clip de punto - + Define/create a clip filter which clips a field data at point Definir/crear un filtro de clip que recorte un campo de datos en el punto @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem FEM - + Filter functions Funciones de filtro - + Functions for use in postprocessing filter... Funciones para uso en el filtro de postprocesamiento... - + Plane Plano - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Espesor [mm] - + Stress [MPa] Plot Y-Axis Label Esfuerzo [MPa] - + Linearized Stresses Plot title Esfuerzos linealizados - + Membrane Plot legend item label Membrana - + Membrane and Bending Plot legend item label Membrana y flexión - + Total Plot legend item label Total - + Fem FEM - + Stress linearization plot Gráfica de linearización de esfuerzo - + Define/create stress linearization plots Definir/crear gráficas de linearización de esfuerzo - - + + Wrong selection Selección incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Seleccione un filtro de clip que recorra un campo de ESFUERZO a lo largo de una línea, por favor. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem FEM - + Post pipeline from result Publicar tubería del resultado - + Creates a post processing pipeline from a result object Crea una tubería de post-procesamiento a partir de un objeto resultado - + Wrong selection type Tipo de selección incorrecta - + Select a result object, please. Seleccione un objeto de resultado, por favor. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem FEM - + Scalar clip filter Filtro de clip escalar - + Define/create a clip filter which clips a field with a scalar value Definir/crear un filtro de clip que recorte un campo con un valor escalar @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem FEM - + Warp filter Filtro de deformación - + Warp the geometry along a vector field by a certain factor Deformar la geometría a lo largo de un campo vectorial por un factor determinado @@ -669,17 +669,17 @@ Crear conjunto de nodos - + Create filter Crear filtro - + Create function Crear función - + Create pipeline from result Crear tubería desde resultado @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Crear un plano de función, definida por su origen y normal - + Create a sphere function, defined by its center and radius Crear una función de esfera, definida por su centro y radio @@ -1095,21 +1095,21 @@ Por favor, especifique otro archivo. FEM Elmer: Not suitable for multithreading - FEM Elmer: Not suitable for multithreading + FEM Elmer: No apto para hilos múltiples Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi.exe' is required. - Wrong Elmer setting: You use more than one CPU core. -Therefore an executable with the suffix '_mpi.exe' is required. + Configuración de Elmer incorrecta: Utiliza más de un núcleo de CPU. +Por lo tanto se requiere un ejecutable con el sufijo '_mpi.exe'. Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi' is required. - Wrong Elmer setting: You use more than one CPU core. -Therefore an executable with the suffix '_mpi' is required. + Configuración de Elmer incorrecta: Utiliza más de un núcleo de CPU. +Por lo tanto se requiere un ejecutable con el sufijo '_mpi'. @@ -2444,7 +2444,7 @@ Especifique otro archivo, por favor. FemGui::TaskPostCut - + Function cut, choose implicit function Función cortada, elegir función implícita @@ -2471,7 +2471,7 @@ Especifique otro archivo, por favor. Opciones de datos de punto - + %1 at (%2; %3; %4) is: %5 %6 %1 en (%2; %3; %4) es: %5 %6 @@ -2495,7 +2495,7 @@ Especifique otro archivo, por favor. FemGui::TaskPostScalarClip - + Scalar clip options Opciones de clip escalar @@ -2503,7 +2503,7 @@ Especifique otro archivo, por favor. FemGui::TaskPostWarpVector - + Warp options Opciones de deformación @@ -2985,6 +2985,7 @@ Especifique otro archivo, por favor. + Constraint Properties Propiedades de Restricción @@ -2999,61 +3000,189 @@ Especifique otro archivo, por favor. Potential: Potential: - - - Electric potential in V - Potencial eléctrico en V - - + + + + + + + + + + + + + + + + + + + + unspecified no especificado + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Escalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Si la restricción define un potencial constante - + Potential Constant Constante de Potencial - + Whether the constraint defines a farfield potential Si la restricción define un potencial de campo lejano - + Farfield / Electric infinity Farfield / Infinidad eléctrica - + Whether the constraint is for the electric force Si la restricción es para la fuerza eléctrica - + Calculate Electric Force Calcular Fuerza Eléctrica - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacidad de Cuerpo: - + Counter of the body (or face) with a capacitance Contador del cuerpo (o cara) con una capacitancia @@ -3205,7 +3334,84 @@ Especifique otro archivo, por favor. Current density: - Current density: + Densidad de corriente: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3329,7 +3535,7 @@ Especifique otro archivo, por favor. - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas @@ -3341,7 +3547,7 @@ Especifique otro archivo, por favor. - + Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3477,7 +3683,7 @@ Especifique otro archivo, por favor. - + Are you sure you want to continue? ¿Está seguro de que desea continuar? @@ -3830,7 +4036,7 @@ siguiente objeto de referencia podría perderse: - + Object dependencies Dependencias del objeto @@ -3842,7 +4048,7 @@ following referencing objects might be lost: siguiente objeto de referencia podría perderse: - + The pipeline is not empty, therefore the following referencing objects might be lost: El pipeline no está vacío, por lo tanto el @@ -5203,20 +5409,20 @@ normal de la cara se utiliza como dirección setupFilter - + Error: A filter can only be applied to a single object. Error: Un filtro sólo se puede aplicar a un solo objeto. - - - + + + The filter could not be set up. No se pudo configurar el filtro. - - + + Error: no post processing object selected. Error: no se ha seleccionado ningún objeto de post-procesamiento. @@ -5226,12 +5432,12 @@ normal de la cara se utiliza como dirección Analysis container - Analysis container + Contenedor de análisis Creates an analysis container with standard solver CalculiX - Creates an analysis container with standard solver CalculiX + Crea un contenedor de análisis con el solver estándar CalculiX @@ -5239,12 +5445,12 @@ normal de la cara se utiliza como dirección Clipping plane on face - Clipping plane on face + Plano de recorte en la cara Add a clipping plane on a selected face - Add a clipping plane on a selected face + Agregar un plano de recorte en una cara seleccionada @@ -5253,7 +5459,7 @@ normal de la cara se utiliza como dirección Remove all clipping planes - Remove all clipping planes + Eliminar todos los planos de recorte @@ -5266,7 +5472,7 @@ normal de la cara se utiliza como dirección Creates a FEM constant vacuum permittivity to overwrite standard value - Creates a FEM constant vacuum permittivity to overwrite standard value + Crea un permitividad de vacío constante FEM para sobrescribir el valor estándar @@ -5274,12 +5480,12 @@ normal de la cara se utiliza como dirección Constraint body heat source - Constraint body heat source + Restringir fuente de calor del cuerpo Creates a FEM constraint body heat source - Creates a FEM constraint body heat source + Crea una restricción FEM de cuerpo fuente de calor @@ -5287,12 +5493,12 @@ normal de la cara se utiliza como dirección Constraint centrif - Constraint centrif + Restricción de centrifugado Creates a FEM constraint centrif - Creates a FEM constraint centrif + Crea una restricción FEM de centrifugado @@ -5300,12 +5506,12 @@ normal de la cara se utiliza como dirección Constraint electrostatic potential - Constraint electrostatic potential + Restricción de potencial electrostático Creates a FEM constraint electrostatic potential - Creates a FEM constraint electrostatic potential + Crea una restricción FEM de potencial electroestático @@ -5313,12 +5519,12 @@ normal de la cara se utiliza como dirección Constraint flow velocity - Constraint flow velocity + Restricción de velocidad de flujo Creates a FEM constraint flow velocity - Creates a FEM constraint flow velocity + Crea una restricción FEM de velocidad de flujo @@ -5326,12 +5532,12 @@ normal de la cara se utiliza como dirección Constraint initial flow velocity - Constraint initial flow velocity + Restricción de velocidad inicial de flujo Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Crea una restricción FEM de velocidad inicial de flujo @@ -5339,49 +5545,49 @@ normal de la cara se utiliza como dirección Constraint initial pressure - Constraint initial pressure + Restricción de presión inicial Creates a FEM constraint initial pressure - Creates a FEM constraint initial pressure + Crea una restricción FEM de presión inicial FEM_ConstraintSectionPrint - + Constraint sectionprint - Constraint sectionprint + Restricción de la sección de impresión - + Creates a FEM constraint sectionprint - Creates a FEM constraint sectionprint + Crea una restricción FEM de sección de impresión FEM_ConstraintSelfWeight - + Constraint self weight - Constraint self weight + Restricción de peso propio - + Creates a FEM constraint self weight - Creates a FEM constraint self weight + Crea una restricción FEM de peso propio FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5389,177 +5595,177 @@ normal de la cara se utiliza como dirección FEM_ElementFluid1D - + Fluid section for 1D flow - Fluid section for 1D flow + Sección de fluido para flujo en 1D - + Creates a FEM fluid section for 1D flow - Creates a FEM fluid section for 1D flow + Crea una sección de fluido FEM para un flujo de 1D FEM_ElementGeometry1D - + Beam cross section - Beam cross section + Sección transversal de la viga - + Creates a FEM beam cross section - Creates a FEM beam cross section + Crear una sección transversal de viga FEM FEM_ElementGeometry2D - + Shell plate thickness - Shell plate thickness + Espesor de placa de caparazón - + Creates a FEM shell plate thickness - Creates a FEM shell plate thickness + Crea un espesor de placa de caparazón FEM FEM_ElementRotation1D - + Beam rotation - Beam rotation + Rotación de la viga - + Creates a FEM beam rotation - Creates a FEM beam rotation + Crea una rotación de la viga FEM FEM_EquationElectrostatic - + Electrostatic equation - Electrostatic equation + Ecuación electrostática - + Creates a FEM equation for electrostatic - Creates a FEM equation for electrostatic + Crea una ecuación FEM para electrostática FEM_EquationElasticity - + Elasticity equation - Elasticity equation + Ecuación de elasticidad - + Creates a FEM equation for elasticity - Creates a FEM equation for elasticity + Crea una ecuación FEM para elasticidad FEM_EquationFlow - + Flow equation - Flow equation + Ecuación de flujo - + Creates a FEM equation for flow - Creates a FEM equation for flow + Crea una ecuación MEF para flujo FEM_EquationFlux - + Flux equation - Flux equation + Ecuación de flujo - + Creates a FEM equation for flux - Creates a FEM equation for flux + Crea una ecuación MEF para flujo FEM_EquationElectricforce - + Electricforce equation Ecuación de la Fuerza Eléctrica - + Creates a FEM equation for electric forces - Creates a FEM equation for electric forces + Crea una ecuación FEM para fuerzas eléctricas FEM_EquationHeat - + Heat equation - Heat equation + Ecuación de calor - + Creates a FEM equation for heat - Creates a FEM equation for heat + Crea una ecuación FEM para el calor FEM_Examples - - + + Open FEM examples - Open FEM examples + Abre ejemplos de FEM FEM_MaterialEditor - + Material editor - Material editor + Editor de materiales - + Opens the FreeCAD material editor - Opens the FreeCAD material editor + Abrir el editor de materiales de FreeCAD FEM_MaterialFluid - + Material for fluid - Material for fluid + Material para fluído - + Creates a FEM material for fluid - Creates a FEM material for fluid + Crea un material FEM para fluido FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material - Nonlinear mechanical material + Material mecánico no lineal - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5567,12 +5773,12 @@ normal de la cara se utiliza como dirección FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5580,12 +5786,12 @@ normal de la cara se utiliza como dirección FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5593,12 +5799,12 @@ normal de la cara se utiliza como dirección FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5606,12 +5812,12 @@ normal de la cara se utiliza como dirección FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5619,12 +5825,12 @@ normal de la cara se utiliza como dirección FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5632,8 +5838,8 @@ normal de la cara se utiliza como dirección FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5641,12 +5847,12 @@ normal de la cara se utiliza como dirección FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5654,12 +5860,12 @@ normal de la cara se utiliza como dirección FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5667,64 +5873,64 @@ normal de la cara se utiliza como dirección FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher - Create a FEM mesh from a solid or face shape by Netgen internal mesher + Crear una malla FEM desde una forma sólida o cara mediante el creador de mallas interno de Netgen FEM_MeshRegion - + FEM mesh region - FEM mesh region + Región de malla FEM - + Creates a FEM mesh region - Creates a FEM mesh region + Crear una región de malla FEM FEM_ResultShow - + Show result Mostrar resultado - + Shows and visualizes selected result data - Shows and visualizes selected result data + Muestra y visualiza los datos de resultados seleccionados FEM_ResultsPurge - + Purge results - Purge results + Purgar resultados - + Purges all results from active analysis - Purges all results from active analysis + Purga todos los resultados de los análisis activos FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5732,12 +5938,12 @@ normal de la cara se utiliza como dirección FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5745,12 +5951,12 @@ normal de la cara se utiliza como dirección FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5758,12 +5964,12 @@ normal de la cara se utiliza como dirección FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5771,12 +5977,12 @@ normal de la cara se utiliza como dirección FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5784,12 +5990,12 @@ normal de la cara se utiliza como dirección FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5797,12 +6003,12 @@ normal de la cara se utiliza como dirección FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -5858,7 +6064,7 @@ normal de la cara se utiliza como dirección Abort - Abort + Abortar @@ -5892,7 +6098,7 @@ normal de la cara se utiliza como dirección Select Solids - Select Solids + Seleccionar sólidos @@ -5963,7 +6169,7 @@ normal de la cara se utiliza como dirección Max Shear Stress - Max Shear Stress + Estrés máximo de corte @@ -6004,13 +6210,13 @@ normal de la cara se utiliza como dirección No histogram available. Please select a result type first. - No histogram available. -Please select a result type first. + No hay histograma disponible. +Por favor, primero seleccione un tipo de resultado. Histogram of {} - Histogram of {} + Histograma de {} @@ -6020,13 +6226,13 @@ Please select a result type first. Empty result mesh - Empty result mesh + Malla resultante vacía No result object - No result object + Ningún objeto resultante @@ -6034,27 +6240,26 @@ Please select a result type first. Constraint current density - Constraint current density + Restringir densidad actual Creates a FEM constraint current density - Creates a FEM constraint current density + Crear una restricción FEM de densidad de corriente FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + Ecuación Magnetodinámica2D - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Crear una ecuación FEM para fuerzas magnetodinámicas en 2D @@ -6067,30 +6272,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + Restricciones electromagnéticas... Electromagnetic constraints - Electromagnetic constraints + Restricciones electromagnéticas CmdFEMCompEmEquations - + Fem FEM - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Ecuaciones electromagnéticas para el solucionador Elmer + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm index be56d619e9..f1e5d75483 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 04a34d2b10..38ab0c61eb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Aplikatu aldaketak kanalizazioari - + Apply changes to parameters directly and not on recompute only... Aplikatu parametroak aldaketak zuzenean eta ez birkalkulatzean soilik... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Eskualde-ebaketako iragazkia - + Define/create a clip filter which uses functions to define the cliped region Definitu/sortu eskualde ebaki bat definitzeko funtzioak erabiltzen dituen ebaketa-iragazki bat - + Wrong selection Hautapen okerra - + Select a pipeline, please. Hautatu kanalizazio bat, mesedez. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Eskualde-mozketako iragazkia - + Cut the data along an implicit function Moztu datuak funtzio inplizitu baten luzeran @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Lerro-ebaketako iragazkia - + Define/create a clip filter which clips a field along a line Definitu/sortu eremu bat lerro batean zehar ebakitzen duen ebaketa-iragazki bat @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Datuak puntuan ebakitzeko iragazkia - + Define/create a clip filter which clips a field data at point Definitu/sortu eremu bateko datuak puntu baten ebakitzen duen ebaketa-iragazki bat @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Iragazki-funtzioak - + Functions for use in postprocessing filter... Post-prozesatzeko iragazkian erabiliko diren funtzioak... - + Plane Planoa - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Lodiera [mm] - + Stress [MPa] Plot Y-Axis Label Estresa [MPa] - + Linearized Stresses Plot title Estres linealizatua - + Membrane Plot legend item label Mintza - + Membrane and Bending Plot legend item label Mintza eta makurdura - + Total Plot legend item label Totala - + Fem Fem - + Stress linearization plot Estresa linealizatzeko trazaketa - + Define/create stress linearization plots Definitu/sortu estresa linealizatzeko trazaketak - - + + Wrong selection Hautapen okerra - - + + Select a Clip filter which clips a STRESS field along a line, please. Hautatu ESTRES eremu bat lerro batean zehar ebakitzen duen ebaketa-iragazki bat. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Argitaratu kanalizazioa emaitzatik - + Creates a post processing pipeline from a result object Post-prozesuko kanalizazio bat sortzen du emaitza-objektu batetik abiatuta - + Wrong selection type Hautapen mota okerra - + Select a result object, please. Hautatu emaitzako objektua. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Ebaketa-iragazki eskalarra - + Define/create a clip filter which clips a field with a scalar value Definitu/sortu eremu bat balio eskalar batekin ebakitzen duen ebaketa-iragazki bat @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Bihurritze-iragazkia - + Warp the geometry along a vector field by a certain factor Bihurritu geometria eremu bektorial baten luzeran, faktore jakin bat erabilita @@ -669,17 +669,17 @@ Sortu nodo multzoa - + Create filter Sortu iragazkia - + Create function Sortu funtzioa - + Create pipeline from result Sortu kanalizazioa emaitzatik @@ -766,12 +766,12 @@ hasierako tenperatura: FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Sortu plano-funtzioa, bere jatorria eta normala abiapuntutzat hartuta - + Create a sphere function, defined by its center and radius Sortu esfera-funtzioa, bere zentroa eta erradioa abiapuntutzat hartuta @@ -2446,7 +2446,7 @@ Zehaztu beste fitxategi bat. FemGui::TaskPostCut - + Function cut, choose implicit function Funtzio moztua, aukeratu funtzio inplizitua @@ -2473,7 +2473,7 @@ Zehaztu beste fitxategi bat. Puntu bateko datuek aukerak - + %1 at (%2; %3; %4) is: %5 %6 %1 hemen: (%2; %3; %4) honakoa da: %5 %6 @@ -2497,7 +2497,7 @@ Zehaztu beste fitxategi bat. FemGui::TaskPostScalarClip - + Scalar clip options Ebaketa eskalarraren aukerak @@ -2505,7 +2505,7 @@ Zehaztu beste fitxategi bat. FemGui::TaskPostWarpVector - + Warp options Bihurritze-aukerak @@ -2987,6 +2987,7 @@ Zehaztu beste fitxategi bat. + Constraint Properties Murrizketa-propietateak @@ -3001,61 +3002,189 @@ Zehaztu beste fitxategi bat. Potential: Potentziala: - - - Electric potential in V - Potentzial elektrikoa Vn - - + + + + + + + + + + + + + + + + + + + + unspecified zehaztu gabea + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Eskalarra + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Murrizketak potentzial konstantea definitzen duen ala ez - + Potential Constant Potentzial-konstantea - + Whether the constraint defines a farfield potential Murrizketak eremu urruneko potentzial definitzen duen ala ez - + Farfield / Electric infinity Urruneko eremua / Amaigabetasun elektrikoa - + Whether the constraint is for the electric force Murrizketa indar elektrikorako den ala ez - + Calculate Electric Force Kalkulatu indar elektrikoa - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Edukiera-gorputza: - + Counter of the body (or face) with a capacitance Gorputzaren (edo aurpegiaren) zenbagailua kapazitantzia batekin @@ -3209,6 +3338,83 @@ Zehaztu beste fitxategi bat. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3331,7 +3537,7 @@ Zehaztu beste fitxategi bat. - + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean @@ -3343,7 +3549,7 @@ Zehaztu beste fitxategi bat. - + Do you want to close this dialog? Koadro hori itxi nahi duzu? @@ -3479,7 +3685,7 @@ Zehaztu beste fitxategi bat. - + Are you sure you want to continue? Ziur zaude jarraitu nahi duzula? @@ -3832,7 +4038,7 @@ duten objektuak galdu egin daitezke: - + Object dependencies Objektuaren mendekotasunak @@ -3844,7 +4050,7 @@ following referencing objects might be lost: honako erreferentzia duten objektuak galdu daitezke: - + The pipeline is not empty, therefore the following referencing objects might be lost: Kanalizazioa ez dago hutsik, eta honako erreferentzia @@ -5205,20 +5411,20 @@ norabidea erabiliko da norabide gisa setupFilter - + Error: A filter can only be applied to a single object. Errorea: Iragazki bat objektu bakar bati soilik aplikatu dakioke. - - - + + + The filter could not be set up. Ezin izan da iragazkia konfiguratu. - - + + Error: no post processing object selected. Errorea: Ez da hautatu post-prozesuko objektua. @@ -5352,12 +5558,12 @@ norabidea erabiliko da norabide gisa FEM_ConstraintSectionPrint - + Constraint sectionprint Sekzio-inprimatzearen murrizketa - + Creates a FEM constraint sectionprint Sekzio-inprimatzearen FEM murrizketa bat sortzen du @@ -5365,12 +5571,12 @@ norabidea erabiliko da norabide gisa FEM_ConstraintSelfWeight - + Constraint self weight Murriztu berezko pisua - + Creates a FEM constraint self weight Berezko pisuaren FEM murrizketa bat sortzen du @@ -5378,12 +5584,12 @@ norabidea erabiliko da norabide gisa FEM_ConstraintTie - + Constraint tie Murriztu lokarria - + Creates a FEM constraint tie Lokarriaren FEM murrizketa bat sortzen du @@ -5391,12 +5597,12 @@ norabidea erabiliko da norabide gisa FEM_ElementFluid1D - + Fluid section for 1D flow Jariakin-sekzioa 1D jariorako - + Creates a FEM fluid section for 1D flow FEM jariakin-sekzio bat sortzen du 1D jariorako @@ -5404,12 +5610,12 @@ norabidea erabiliko da norabide gisa FEM_ElementGeometry1D - + Beam cross section Habearen zeharkako sekzioa - + Creates a FEM beam cross section FEM habe baten zeharkako sekzioa sortzen du @@ -5417,12 +5623,12 @@ norabidea erabiliko da norabide gisa FEM_ElementGeometry2D - + Shell plate thickness Oskol-plakaren lodiera - + Creates a FEM shell plate thickness FEM oskol-plakaren lodiera bat sortzen du @@ -5430,12 +5636,12 @@ norabidea erabiliko da norabide gisa FEM_ElementRotation1D - + Beam rotation Habe-biraketa - + Creates a FEM beam rotation FEM habe baten biraketa sortzen du @@ -5443,12 +5649,12 @@ norabidea erabiliko da norabide gisa FEM_EquationElectrostatic - + Electrostatic equation Elektrostatika-ekuazioa - + Creates a FEM equation for electrostatic FEM ekuazio bat sortzen du elektrostatikarako @@ -5456,12 +5662,12 @@ norabidea erabiliko da norabide gisa FEM_EquationElasticity - + Elasticity equation Elastikotasun-ekuazioa - + Creates a FEM equation for elasticity FEM ekuazio bat sortzen du elastikotasunerako @@ -5469,12 +5675,12 @@ norabidea erabiliko da norabide gisa FEM_EquationFlow - + Flow equation Jario-ekuazioa - + Creates a FEM equation for flow FEM ekuazio bat sortzen du jariorako @@ -5482,12 +5688,12 @@ norabidea erabiliko da norabide gisa FEM_EquationFlux - + Flux equation Fluxu-ekuazioa - + Creates a FEM equation for flux FEM ekuazio bat sortzen du fluxurako @@ -5495,12 +5701,12 @@ norabidea erabiliko da norabide gisa FEM_EquationElectricforce - + Electricforce equation Indar elektrikoaren ekuazioa - + Creates a FEM equation for electric forces FEM ekuazio bat sortzen du indar elektrikoetarako @@ -5508,12 +5714,12 @@ norabidea erabiliko da norabide gisa FEM_EquationHeat - + Heat equation Bero-ekuazioa - + Creates a FEM equation for heat FEM ekuazio bat sortzen du berorako @@ -5521,8 +5727,8 @@ norabidea erabiliko da norabide gisa FEM_Examples - - + + Open FEM examples Ireki FEM adibideak @@ -5530,12 +5736,12 @@ norabidea erabiliko da norabide gisa FEM_MaterialEditor - + Material editor Materialen editorea - + Opens the FreeCAD material editor FreeCADen materialen editorea irekitzen du @@ -5543,12 +5749,12 @@ norabidea erabiliko da norabide gisa FEM_MaterialFluid - + Material for fluid Materiala jariakinerako - + Creates a FEM material for fluid FEM materiala sortzen du jariakinerako @@ -5556,12 +5762,12 @@ norabidea erabiliko da norabide gisa FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Material mekaniko ez-lineala - + Creates a nonlinear mechanical material Material mekaniko ez-lineal bat sortzen du @@ -5569,12 +5775,12 @@ norabidea erabiliko da norabide gisa FEM_MaterialReinforced - + Reinforced material (concrete) Indartutako materiala (hormigoia) - + Creates a material for reinforced matrix material such as concrete Material bat sortzen du matrize indartuko materialetarako, esaterako hormigoirako @@ -5582,12 +5788,12 @@ norabidea erabiliko da norabide gisa FEM_MaterialSolid - + Material for solid Materiala solidorako - + Creates a FEM material for solid FEM material bat sortzen du solido baterako @@ -5595,12 +5801,12 @@ norabidea erabiliko da norabide gisa FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM amaraunetik amaraunera - + Convert the surface of a FEM mesh to a mesh Bihurtu amaraun FEM amaraun baten gainazala @@ -5608,12 +5814,12 @@ norabidea erabiliko da norabide gisa FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM amaraunaren muga-geruza - + Creates a FEM mesh boundary layer FEM amaraunaren muga-geruza sortzen du @@ -5621,12 +5827,12 @@ norabidea erabiliko da norabide gisa FEM_MeshClear - + Clear FEM mesh Garbitu FEM amarauna - + Clear the Mesh of a FEM mesh object Garbitu FEM amaraun-objektu baten amarauna @@ -5634,8 +5840,8 @@ norabidea erabiliko da norabide gisa FEM_MeshDisplayInfo - - + + Display FEM mesh info Bistaratu FEM amaraunaren informazioa @@ -5643,12 +5849,12 @@ norabidea erabiliko da norabide gisa FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM amarauna formatik, Gmsh bidez - + Create a FEM mesh from a shape by Gmsh mesher Sortu FEM amaraun bat forma batetik abiatuz, Gmsh amaraun-sortzailea erabiliz @@ -5656,12 +5862,12 @@ norabidea erabiliko da norabide gisa FEM_MeshGroup - + FEM mesh group FEM amaraun taldea - + Creates a FEM mesh group FEM amaraun talde bat sortzen du @@ -5669,12 +5875,12 @@ norabidea erabiliko da norabide gisa FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM amarauna formatik, Netgen bidez - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Sortu FEM amaraun bat solido batetik edo aurpegi-forma batetik, Netgen barneko amaraun-sortzailea erabiliz @@ -5682,12 +5888,12 @@ norabidea erabiliko da norabide gisa FEM_MeshRegion - + FEM mesh region FEM amaraun-eskualdea - + Creates a FEM mesh region FEM amaraun-eskualde bat sortzen du @@ -5695,12 +5901,12 @@ norabidea erabiliko da norabide gisa FEM_ResultShow - + Show result Erakutsi emaitza - + Shows and visualizes selected result data Hautatutako emaitza-datuak erakusten eta bistaratzen ditu @@ -5708,12 +5914,12 @@ norabidea erabiliko da norabide gisa FEM_ResultsPurge - + Purge results Araztu emaitzak - + Purges all results from active analysis Analisi aktiboetako emaitza guztiak arazten ditu @@ -5721,12 +5927,12 @@ norabidea erabiliko da norabide gisa FEM_SolverCalculixCxxtools - + Solver CalculiX Standard CalculiX ebazle estandarra - + Creates a standard FEM solver CalculiX with ccx tools FEM CalculiX ebazle estandarra sortzen du ccx tresnekin @@ -5734,12 +5940,12 @@ norabidea erabiliko da norabide gisa FEM_SolverCalculix - + Solver CalculiX (new framework) CalculiX ebazlea (lan-marko berria) - + Creates a FEM solver CalculiX new framework (less result error handling) FEM CalculiX ebazlearen lan-marko berria sortzen du (emaitzen errore-maneiatze gutxiago) @@ -5747,12 +5953,12 @@ norabidea erabiliko da norabide gisa FEM_SolverControl - + Solver job control Ebazle-lanaren kontrola - + Changes solver attributes and runs the calculations for the selected solver Ebazlearen atributuak aldatzen ditu eta hautatutako ebazlerako kalkuluak exekutatzen ditu @@ -5760,12 +5966,12 @@ norabidea erabiliko da norabide gisa FEM_SolverElmer - + Solver Elmer Elmer ebazlea - + Creates a FEM solver Elmer FEM Elmer ebazlea sortzen du @@ -5773,12 +5979,12 @@ norabidea erabiliko da norabide gisa FEM_SolverMystran - + Solver Mystran Mystran ebazlea - + Creates a FEM solver Mystran FEM Mystran ebazlea sortzen du @@ -5786,12 +5992,12 @@ norabidea erabiliko da norabide gisa FEM_SolverRun - + Run solver calculations Exekutatu ebazlearen kalkuluak - + Runs the calculations for the selected solver Hautatutako ebazlearen kalkuluak exekutatzen ditu @@ -5799,12 +6005,12 @@ norabidea erabiliko da norabide gisa FEM_SolverZ88 - + Solver Z88 Z88 ebazlea - + Creates a FEM solver Z88 FEM Z88 ebazlea sortzen du @@ -6047,12 +6253,12 @@ Hasteko, hautatu emaitza mota bat. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6080,19 +6286,47 @@ Hasteko, hautatu emaitza mota bat. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm index 6f432fc71e..bc9a5a90d6 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 6842187262..5a78a96b6a 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem FEM-Elementtimenetelmä - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem FEM-Elementtimenetelmä - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Virheellinen valinta - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem FEM-Elementtimenetelmä - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem FEM-Elementtimenetelmä - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem FEM-Elementtimenetelmä - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem FEM-Elementtimenetelmä - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Taso - + Sphere Pallo @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Paksuus [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem FEM-Elementtimenetelmä - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Virheellinen valinta - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem FEM-Elementtimenetelmä - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem FEM-Elementtimenetelmä - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem FEM-Elementtimenetelmä - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Luo suodatin - + Create function Luo funktio - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Haluatko varmasti jatkaa? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Objektin riippuvuudet @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Näytä tulos - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem FEM-Elementtimenetelmä - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm index 77ad64e7e2..2d906b242a 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 27fdb4e823..86a9ddb9ad 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Appliquer les modifications au pipeline - + Apply changes to parameters directly and not on recompute only... Appliquer les changements aux paramètres directement et non lors du recalcul seulement... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Filtre de découpe selon une région - + Define/create a clip filter which uses functions to define the cliped region Définir/créer un filtre d'écrêtage qui utilise des fonctions pour définir la région écrêtée - + Wrong selection Sélection invalide - + Select a pipeline, please. Sélectionnez un pipeline, s'il vous plaît. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Filtre de fonction de découpe - + Cut the data along an implicit function Couper les données le long d'une fonction implicite @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Filtre d'écrêtage selon une ligne - + Define/create a clip filter which clips a field along a line Définir/créer un filtre d'écrêtage qui écrête un champ le long d'une ligne @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Données du filtre d'écrêtage du point - + Define/create a clip filter which clips a field data at point Définir/créer un filtre d'écrêtage qui écrête les données d'un champ à un point donné @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Fonctions de filtrage - + Functions for use in postprocessing filter... Fonctions à utiliser dans le filtre de post-traitement... - + Plane Plan - + Sphere Sphère @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Épaisseur [mm] - + Stress [MPa] Plot Y-Axis Label Contrainte [MPa] - + Linearized Stresses Plot title Contraintes linéarisées - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane et Pliage - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Graphique de linéarisation des contraintes - + Define/create stress linearization plots Définir/créer des graphiques de linéarisation des contraintes - - + + Wrong selection Sélection invalide - - + + Select a Clip filter which clips a STRESS field along a line, please. Sélectionner un filtre d'écrêtage qui écrête un champ de contrainte le long d'une ligne. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Afficher le pipeline des résultats - + Creates a post processing pipeline from a result object Crée un pipeline de post-traitement à partir d'un objet résultat - + Wrong selection type Type de sélection incorrect - + Select a result object, please. Sélectionnez un objet résultat, s'il vous plaît. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Filtre d'écrêtage scalaire - + Define/create a clip filter which clips a field with a scalar value Définir/créer un filtre d'écrêtage qui écrête un champ avec une valeur scalaire @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Filtre des déformations - + Warp the geometry along a vector field by a certain factor Déforme la géométrie le long d'un champ de vecteurs par un certain facteur @@ -669,17 +669,17 @@ Créer un jeu de nœuds - + Create filter Créer un filtre - + Create function Créer une fonction - + Create pipeline from result Créer un pipeline à partir du résultat @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Créer une fonction de plan, définie par son origine et sa normale - + Create a sphere function, defined by its center and radius Créer une fonction de sphère, définie par son centre et son rayon @@ -2444,7 +2444,7 @@ Veuillez spécifier un autre fichier. FemGui::TaskPostCut - + Function cut, choose implicit function Coupe de fonction, choisissez une fonction implicite @@ -2471,7 +2471,7 @@ Veuillez spécifier un autre fichier. Options des données au point - + %1 at (%2; %3; %4) is: %5 %6 %1 à (%2; %3; %4) est : %5 %6 @@ -2495,7 +2495,7 @@ Veuillez spécifier un autre fichier. FemGui::TaskPostScalarClip - + Scalar clip options Options de l'écrêtage scalaire @@ -2503,7 +2503,7 @@ Veuillez spécifier un autre fichier. FemGui::TaskPostWarpVector - + Warp options Options de la déformation @@ -2985,6 +2985,7 @@ Veuillez spécifier un autre fichier. + Constraint Properties Propriétés de contrainte @@ -2999,61 +3000,189 @@ Veuillez spécifier un autre fichier. Potential: Potentiel : - - - Electric potential in V - Potentiel électrique en V - - + + + + + + + + + + + + + + + + + + + + unspecified non spécifié + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalaire + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Si la contrainte définit un potentiel constant - + Potential Constant Potentiel constant - + Whether the constraint defines a farfield potential Si la contrainte définit un potentiel de champ lointain - + Farfield / Electric infinity Champ lointain/Infinité électrique - + Whether the constraint is for the electric force Si la contrainte est pour la force électrique - + Calculate Electric Force Calculer la force électrique - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacité du corps: - + Counter of the body (or face) with a capacitance Compteur du corps (ou de face) avec une capacité @@ -3205,7 +3334,84 @@ Veuillez spécifier un autre fichier. Current density: - Current density: + Densité actuelle : + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3329,7 +3535,7 @@ Veuillez spécifier un autre fichier. - + A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches @@ -3341,7 +3547,7 @@ Veuillez spécifier un autre fichier. - + Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? @@ -3477,7 +3683,7 @@ Veuillez spécifier un autre fichier. - + Are you sure you want to continue? Êtes-vous sûr de vouloir continuer ? @@ -3829,7 +4035,7 @@ following referencing objects might be lost: - + Object dependencies Dépendances des objets @@ -3840,7 +4046,7 @@ following referencing objects might be lost: La liste des fonctions n'est pas vide, par conséquent les objets de référencement suivants pourraient être perdus : - + The pipeline is not empty, therefore the following referencing objects might be lost: Le pipeline n'est pas vide, donc les objets de référencement suivants peuvent être perdus : @@ -5199,20 +5405,20 @@ vecteur normal de la face est utilisée comme sens setupFilter - + Error: A filter can only be applied to a single object. Erreur : un filtre ne peut être appliqué qu'à un seul objet. - - - + + + The filter could not be set up. Le filtre n'a pas pu être configuré. - - + + Error: no post processing object selected. Erreur: aucun objet de post-traitement sélectionné. @@ -5346,12 +5552,12 @@ vecteur normal de la face est utilisée comme sens FEM_ConstraintSectionPrint - + Constraint sectionprint Contrainte d'affichage de la section - + Creates a FEM constraint sectionprint Crée une contrainte FEM d'affichage de la section @@ -5359,12 +5565,12 @@ vecteur normal de la face est utilisée comme sens FEM_ConstraintSelfWeight - + Constraint self weight Contrainte du poids propre - + Creates a FEM constraint self weight Crée une contrainte FEM de type poids propre @@ -5372,12 +5578,12 @@ vecteur normal de la face est utilisée comme sens FEM_ConstraintTie - + Constraint tie Contrainte de liaison - + Creates a FEM constraint tie Crée une contrainte FEM de type liaison @@ -5385,12 +5591,12 @@ vecteur normal de la face est utilisée comme sens FEM_ElementFluid1D - + Fluid section for 1D flow Section de fluide pour un écoulement 1D - + Creates a FEM fluid section for 1D flow Crée une section de fluide FEM pour un écoulement 1D @@ -5398,12 +5604,12 @@ vecteur normal de la face est utilisée comme sens FEM_ElementGeometry1D - + Beam cross section Coupe transversale d'un élément type poutre - + Creates a FEM beam cross section Crée une coupe FEM transversale d'un élément de type poutre @@ -5411,12 +5617,12 @@ vecteur normal de la face est utilisée comme sens FEM_ElementGeometry2D - + Shell plate thickness Épaisseur d'un élément de type coque - + Creates a FEM shell plate thickness Crée une épaisseur FEM d'un élément de type coque @@ -5424,12 +5630,12 @@ vecteur normal de la face est utilisée comme sens FEM_ElementRotation1D - + Beam rotation Rotation d'un élément type poutre - + Creates a FEM beam rotation Crée une rotation FEM d'un élément de type poutre @@ -5437,12 +5643,12 @@ vecteur normal de la face est utilisée comme sens FEM_EquationElectrostatic - + Electrostatic equation Équation électrostatique - + Creates a FEM equation for electrostatic Créer une équation FEM pour l'électrostatique @@ -5450,12 +5656,12 @@ vecteur normal de la face est utilisée comme sens FEM_EquationElasticity - + Elasticity equation Équation d’élasticité - + Creates a FEM equation for elasticity Crée une équation FEM pour l'élasticité @@ -5463,12 +5669,12 @@ vecteur normal de la face est utilisée comme sens FEM_EquationFlow - + Flow equation Équation d'écoulement - + Creates a FEM equation for flow Crée une équation FEM pour un écoulement @@ -5476,12 +5682,12 @@ vecteur normal de la face est utilisée comme sens FEM_EquationFlux - + Flux equation Équation de flux - + Creates a FEM equation for flux Crée une équation FEM pour un flux @@ -5489,12 +5695,12 @@ vecteur normal de la face est utilisée comme sens FEM_EquationElectricforce - + Electricforce equation Équation de force électrique - + Creates a FEM equation for electric forces Crée une équation FEM pour les forces électriques @@ -5502,12 +5708,12 @@ vecteur normal de la face est utilisée comme sens FEM_EquationHeat - + Heat equation Équation de chaleur - + Creates a FEM equation for heat Crée une équation FEM pour la chaleur @@ -5515,8 +5721,8 @@ vecteur normal de la face est utilisée comme sens FEM_Examples - - + + Open FEM examples Ouvrir des exemples de l'atelier FEM @@ -5524,12 +5730,12 @@ vecteur normal de la face est utilisée comme sens FEM_MaterialEditor - + Material editor Editeur de matériaux - + Opens the FreeCAD material editor Ouvre l’éditeur de matériaux de FreeCAD @@ -5537,12 +5743,12 @@ vecteur normal de la face est utilisée comme sens FEM_MaterialFluid - + Material for fluid Matériau pour fluide - + Creates a FEM material for fluid Crée un matériau FEM pour fluide @@ -5550,12 +5756,12 @@ vecteur normal de la face est utilisée comme sens FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Matériau mécanique non linéaire - + Creates a nonlinear mechanical material Crée un matériau mécanique non linéaire @@ -5563,12 +5769,12 @@ vecteur normal de la face est utilisée comme sens FEM_MaterialReinforced - + Reinforced material (concrete) Matériau renforcé (type béton) - + Creates a material for reinforced matrix material such as concrete Crée un matériau pour des composites renforcés tels que le béton @@ -5576,12 +5782,12 @@ vecteur normal de la face est utilisée comme sens FEM_MaterialSolid - + Material for solid Matériau pour solide - + Creates a FEM material for solid Crée un matériau FEM pour solide @@ -5589,12 +5795,12 @@ vecteur normal de la face est utilisée comme sens FEM_FEMMesh2Mesh - + FEM mesh to mesh Maillage FEM à maillage - + Convert the surface of a FEM mesh to a mesh Convertir la surface d'un maillage FEM en maillage @@ -5602,12 +5808,12 @@ vecteur normal de la face est utilisée comme sens FEM_MeshBoundaryLayer - + FEM mesh boundary layer Couche limite du maillage FEM - + Creates a FEM mesh boundary layer Crée une couche limite du maillage FEM @@ -5615,12 +5821,12 @@ vecteur normal de la face est utilisée comme sens FEM_MeshClear - + Clear FEM mesh Effacer le maillage FEM - + Clear the Mesh of a FEM mesh object Effacer le maillage d'un objet maillage FEM @@ -5628,8 +5834,8 @@ vecteur normal de la face est utilisée comme sens FEM_MeshDisplayInfo - - + + Display FEM mesh info Afficher les informations du maillage FEM @@ -5637,12 +5843,12 @@ vecteur normal de la face est utilisée comme sens FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh Maillage FEM à partir d'une forme de Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Créer un maillage FEM à partir d'une forme avec le mailleur Gmsh @@ -5650,12 +5856,12 @@ vecteur normal de la face est utilisée comme sens FEM_MeshGroup - + FEM mesh group Groupe de maillages FEM - + Creates a FEM mesh group Crée un groupe de maillages FEM @@ -5663,12 +5869,12 @@ vecteur normal de la face est utilisée comme sens FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen Maillage FEM à partir d'une forme de Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Crée un maillage FEM à partir d'un solide ou d'une forme de face par le mailleur interne Netgen @@ -5676,12 +5882,12 @@ vecteur normal de la face est utilisée comme sens FEM_MeshRegion - + FEM mesh region Région de maillage FEM - + Creates a FEM mesh region Crée une région de maillage FEM @@ -5689,12 +5895,12 @@ vecteur normal de la face est utilisée comme sens FEM_ResultShow - + Show result Afficher le résultat - + Shows and visualizes selected result data Affiche et visualise les données des résultats sélectionnés @@ -5702,12 +5908,12 @@ vecteur normal de la face est utilisée comme sens FEM_ResultsPurge - + Purge results Purger les résultats - + Purges all results from active analysis Purger tous les résultats de l'analyse active @@ -5715,12 +5921,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solveur standard CalculiX - + Creates a standard FEM solver CalculiX with ccx tools Crée un solveur standard CalculiX FEM avec les outils ccx @@ -5728,12 +5934,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverCalculix - + Solver CalculiX (new framework) Solveur CalculiX (nouveau modèle) - + Creates a FEM solver CalculiX new framework (less result error handling) Crée un solveur nouveau modèle CalculiX FEM (moins de traitement des erreurs de résultat) @@ -5741,12 +5947,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverControl - + Solver job control Contrôle des tâches du solveur - + Changes solver attributes and runs the calculations for the selected solver Modifie les attributs du solveur et lance les calculs pour le solveur sélectionné @@ -5754,12 +5960,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverElmer - + Solver Elmer Solveur Elmer - + Creates a FEM solver Elmer Crée un solveur Elmer FEM @@ -5767,12 +5973,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverMystran - + Solver Mystran Solveur Mystran - + Creates a FEM solver Mystran Crée un solveur Mystran FEM @@ -5780,12 +5986,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverRun - + Run solver calculations Lancer les calculs du solveur - + Runs the calculations for the selected solver Lance les calculs pour le solveur sélectionné @@ -5793,12 +5999,12 @@ vecteur normal de la face est utilisée comme sens FEM_SolverZ88 - + Solver Z88 Solveur Z88 - + Creates a FEM solver Z88 Crée un solveur Z88 FEM @@ -6030,27 +6236,26 @@ Veuillez d'abord sélectionner un type de résultat. Constraint current density - Constraint current density + Contrainte de densité de courant Creates a FEM constraint current density - Creates a FEM constraint current density + Crée une contrainte FEM de densité de courant FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + Équation magnétodynamique 2D - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Crée une équation FEM pour les forces magnétodynamique 2D @@ -6063,30 +6268,58 @@ Veuillez d'abord sélectionner un type de résultat. Electromagnetic constraints... - Electromagnetic constraints... + Contraintes électromagnétiques... Electromagnetic constraints - Electromagnetic constraints + Contraintes électromagnétiques CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Équations électromagnétiques pour le solveur Elmer + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm index 88a80b29ca..7fba7440cc 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 420f32f338..25c19bf03e 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Escolma errada - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plano - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Grosor [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Escolma errada - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Dependencias do obxecto @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Amosar resultado - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm index 8edbd739c0..80aa125087 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index b9aec81bab..635cfda05c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -325,17 +325,17 @@ Ograničenje kontakta CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -343,27 +343,27 @@ Ograničenje kontakta CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Pogrešan odabir - + Select a pipeline, please. Select a pipeline, please. @@ -371,17 +371,17 @@ Ograničenje kontakta CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -389,17 +389,17 @@ Ograničenje kontakta CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -407,17 +407,17 @@ Ograničenje kontakta CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -425,27 +425,27 @@ Ograničenje kontakta CmdFemPostFunctions - + Fem Fem - + Filter functions Funkcije filtra - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Površina - + Sphere Kugla @@ -453,65 +453,65 @@ Ograničenje kontakta CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrana - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Ukupno - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Pogrešan odabir - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -519,27 +519,27 @@ Ograničenje kontakta CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -547,17 +547,17 @@ Ograničenje kontakta CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -565,17 +565,17 @@ Ograničenje kontakta CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -673,17 +673,17 @@ Ograničenje kontakta Create nodes set - + Create filter Izradi Filtar - + Create function Stvori funkciju - + Create pipeline from result Create pipeline from result @@ -770,12 +770,12 @@ Ograničenje kontakta FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2450,7 +2450,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2477,7 +2477,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2501,7 +2501,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2509,7 +2509,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2991,6 +2991,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3005,61 +3006,189 @@ Specify another file please. Potential: Potencijal: - - - Electric potential in V - Električni potencijal u V - - + + + + + + + + + + + + + + + + + + + + unspecified neodređen + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3215,6 +3344,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3337,7 +3543,7 @@ Specify another file please. - + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka @@ -3349,7 +3555,7 @@ Specify another file please. - + Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? @@ -3485,7 +3691,7 @@ Specify another file please. - + Are you sure you want to continue? Jeste li sigurni da želite nastaviti? @@ -3838,7 +4044,7 @@ following referencing objects might be lost: - + Object dependencies Zavisnosti objekta @@ -3850,7 +4056,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5211,20 +5417,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5358,12 +5564,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5371,12 +5577,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5384,12 +5590,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5397,12 +5603,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5410,12 +5616,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5423,12 +5629,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5436,12 +5642,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5449,12 +5655,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5462,12 +5668,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5475,12 +5681,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5488,12 +5694,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5501,12 +5707,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Jednadžba električne sile - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5514,12 +5720,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5527,8 +5733,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5536,12 +5742,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5549,12 +5755,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5562,12 +5768,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5575,12 +5781,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5588,12 +5794,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5601,12 +5807,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5614,12 +5820,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5627,12 +5833,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5640,8 +5846,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5649,12 +5855,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5662,12 +5868,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5675,12 +5881,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5688,12 +5894,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5701,12 +5907,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Pokaži rezultat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5714,12 +5920,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5727,12 +5933,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5740,12 +5946,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5753,12 +5959,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5766,12 +5972,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5779,12 +5985,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5792,12 +5998,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5805,12 +6011,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6053,12 +6259,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6086,19 +6292,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm index 136fdadb5c..ce0e083016 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 3840094f55..3096d0ab6f 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Végeselemes analízis FEM - + Apply changes to pipeline Változások alkalmazása a folyamatokra - + Apply changes to parameters directly and not on recompute only... Változtatások mentése a paraméterekre közvetlenül és nem csak újraszámolása... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Végeselemes analízis FEM - + Region clip filter Terület kivágási szűrő - + Define/create a clip filter which uses functions to define the cliped region Kivágás szűrő definiálása/létrehozása, amely függvények segítségével határozza meg a vágott régiót - + Wrong selection Rossz kijelölés - + Select a pipeline, please. Kérjük, válasszon ki egy folyamatot. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Végeselemes analízis FEM - + Function cut filter Kivágási szűrő funkció - + Cut the data along an implicit function Az adatok kivágása egy implicit függvény mentén @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Végeselemes analízis FEM - + Line clip filter Vonal kivágó szűrő - + Define/create a clip filter which clips a field along a line Kivágás szűrő definiálása/létrehozása, amely egy mezőt egy vonal mentén vág le @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Végeselemes analízis FEM - + Data at point clip filter Adat a pont kivágó szűrőjén - + Define/create a clip filter which clips a field data at point Kivágó szűrő definiálása/létrehozása, amely pontnál vág egy mezőadatot @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Végeselemes analízis FEM - + Filter functions Szűrési funkciók - + Functions for use in postprocessing filter... Az utófeldolgozási szűrőben használható funkciók... - + Plane Sík - + Sphere Gömb @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Vastagság [mm] - + Stress [MPa] Plot Y-Axis Label Nyomás [MPa] - + Linearized Stresses Plot title Linearizált nyomások - + Membrane Plot legend item label Membrán - + Membrane and Bending Plot legend item label Membrán és hajlítás - + Total Plot legend item label Összesen - + Fem Végeselemes analízis FEM - + Stress linearization plot Nyomás linearizációs diagram - + Define/create stress linearization plots Nyomés linearizációs diagramok definiálása/létrehozása - - + + Wrong selection Rossz kijelölés - - + + Select a Clip filter which clips a STRESS field along a line, please. Kérjük, válasszon ki egy Kivágás szűrőt, amely egy VONAL MENTÉN rögzíti a NYOMÁS mezőt. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Végeselemes analízis FEM - + Post pipeline from result Folyamat feladása az eredményből - + Creates a post processing pipeline from a result object Utófeldolgozási folyamatot hoz létre egy eredmény tárgyból - + Wrong selection type Hibás kiválasztási típus - + Select a result object, please. Jelöljön ki egy eredmény tárgyat. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Végeselemes analízis FEM - + Scalar clip filter Skaláris vágószűrő - + Define/create a clip filter which clips a field with a scalar value Vágásszűrő definiálása/hozzáadása, amely skaláris értékkel vágja le a mezőt @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Végeselemes analízis FEM - + Warp filter Deformációs vizualizációs szűrő - + Warp the geometry along a vector field by a certain factor Deformálja a geometriát egy vektormező mentén egy bizonyos tényezővel @@ -669,17 +669,17 @@ Csomópontkészlet létrehozása - + Create filter Szűrő létrehozása - + Create function Függvény létrehozása - + Create pipeline from result Folyamat létrehozása az eredményből @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Kezdőpont és aktuális pont alapján definiált rétegfüggvény létrehozása - + Create a sphere function, defined by its center and radius Gömbfüggvény létrehozása, amelyet a középpontja és a sugara határoz meg @@ -2432,7 +2432,7 @@ Kérjük, adjon meg egy másik fájlt. FemGui::TaskPostCut - + Function cut, choose implicit function Vágási funkció, implicit funkció kiválasztása @@ -2459,7 +2459,7 @@ Kérjük, adjon meg egy másik fájlt. Adatok a pont lehetőségein - + %1 at (%2; %3; %4) is: %5 %6 %1 a (%2; %3; %4) pontnál: %5 %6 @@ -2483,7 +2483,7 @@ Kérjük, adjon meg egy másik fájlt. FemGui::TaskPostScalarClip - + Scalar clip options Skaláris vágási lehetőségek @@ -2491,7 +2491,7 @@ Kérjük, adjon meg egy másik fájlt. FemGui::TaskPostWarpVector - + Warp options Deformációs vizualizációs lehetőségek @@ -2973,6 +2973,7 @@ Kérjük, adjon meg egy másik fájlt. + Constraint Properties Kényszerítés tulajdonságai @@ -2987,61 +2988,189 @@ Kérjük, adjon meg egy másik fájlt. Potential: Feszültség: - - - Electric potential in V - Elektromos feszültség V-ban - - + + + + + + + + + + + + + + + + + + + + unspecified határozatlan + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Skaláris + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Meghatároz-e a kötés állandó feszültséget - + Potential Constant Állandó feszültség - + Whether the constraint defines a farfield potential Meghatározza-e a kötés a távoli feszültséget - + Farfield / Electric infinity Távoli mező / elektromos végtelen - + Whether the constraint is for the electric force Meghatároz-e a kényszertés elektromos erőhöz kapcsolódást - + Calculate Electric Force Elektromos erő kiszámítása - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Kapacitás test: - + Counter of the body (or face) with a capacitance A test (vagy felület) számlálója kapacitással @@ -3193,7 +3322,84 @@ Kérjük, adjon meg egy másik fájlt. Current density: - Current density: + Jelenlegi sűrűség: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3317,7 +3523,7 @@ Kérjük, adjon meg egy másik fájlt. - + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen @@ -3329,7 +3535,7 @@ Kérjük, adjon meg egy másik fájlt. - + Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? @@ -3465,7 +3671,7 @@ Kérjük, adjon meg egy másik fájlt. - + Are you sure you want to continue? Biztosan folytatja? @@ -3818,7 +4024,7 @@ a következő hivatkozási tárgyak elveszhetnek: - + Object dependencies Objektumfüggőségek @@ -3830,7 +4036,7 @@ following referencing objects might be lost: a következő hivatkozási tárgyak elveszhetnek: - + The pipeline is not empty, therefore the following referencing objects might be lost: A folyamat nem üres, ezért a @@ -5191,20 +5397,20 @@ vektorát használják irányként setupFilter - + Error: A filter can only be applied to a single object. Hiba: Egy szűrő csak egyetlen tárgyra alkalmazható. - - - + + + The filter could not be set up. A szűrőt nem sikerült beállítani. - - + + Error: no post processing object selected. Hiba: nincs kijelölve tárgy utófeldolgozásra. @@ -5338,461 +5544,461 @@ vektorát használják irányként FEM_ConstraintSectionPrint - + Constraint sectionprint Kényszerítés szakasznyomtatás - + Creates a FEM constraint sectionprint - Creates a FEM constraint sectionprint + Létrehoz egy végeselemes szakasznyomtatás kényszerítést FEM_ConstraintSelfWeight - + Constraint self weight - Constraint self weight + Önsúly kényszerítése - + Creates a FEM constraint self weight - Creates a FEM constraint self weight + Létrehoz egy VEM önsúly kényszerítést FEM_ConstraintTie - + Constraint tie - Constraint tie + Kötési kényszerítés - + Creates a FEM constraint tie - Creates a FEM constraint tie + Létrehoz egy végeselemes kötési kényszerítést FEM_ElementFluid1D - + Fluid section for 1D flow - Fluid section for 1D flow + 1D áramlás folyadék szakasza - + Creates a FEM fluid section for 1D flow - Creates a FEM fluid section for 1D flow + Létrehozza egy 1D-áramlásnak a VEM folyadék szakaszát FEM_ElementGeometry1D - + Beam cross section - Beam cross section + Gerenda keresztmetszete - + Creates a FEM beam cross section - Creates a FEM beam cross section + Létrehoz egy VEM gerenda keresztmetszetet FEM_ElementGeometry2D - + Shell plate thickness - Shell plate thickness + Héj lemez vastagsága - + Creates a FEM shell plate thickness - Creates a FEM shell plate thickness + Létrehoz egy VEM héj lemez vastagságot FEM_ElementRotation1D - + Beam rotation - Beam rotation + Gerenda forgatás - + Creates a FEM beam rotation - Creates a FEM beam rotation + Létrehoz egy VEM gerenda forgatást FEM_EquationElectrostatic - + Electrostatic equation - Electrostatic equation + Elektrosztatikus egyenlet - + Creates a FEM equation for electrostatic - Creates a FEM equation for electrostatic + Létrehoz egy végeselemes módszerű elektrosztatikai egyenletet FEM_EquationElasticity - + Elasticity equation - Elasticity equation + Rugalmassági egyenlet - + Creates a FEM equation for elasticity - Creates a FEM equation for elasticity + Létrehoz egy végeselemes módszerű rugalmassági egyenletet FEM_EquationFlow - + Flow equation - Flow equation + Áramlási egyenlet - + Creates a FEM equation for flow - Creates a FEM equation for flow + Létrehoz egy végeselemes módszerű áramlási egyenletet FEM_EquationFlux - + Flux equation - Flux equation + Fluxusegyenlet - + Creates a FEM equation for flux - Creates a FEM equation for flux + Létrehoz egy VEM egyenletet a fluxushoz FEM_EquationElectricforce - + Electricforce equation Elektrosztatikus erőegyenlet - + Creates a FEM equation for electric forces - Creates a FEM equation for electric forces + Létrehoz egy VEM egyenletet az elektromos erők számára FEM_EquationHeat - + Heat equation - Heat equation + Hővezetési egyenlet - + Creates a FEM equation for heat - Creates a FEM equation for heat + Létrehoz egy hőtani végeselemes módszerű áramlási egyenletet FEM_Examples - - + + Open FEM examples - Open FEM examples + Véges elemes példák megnyitása FEM_MaterialEditor - + Material editor - Material editor + Anyag szerkesztő - + Opens the FreeCAD material editor - Opens the FreeCAD material editor + Megnyitja a FreeCAD anyag szerkesztőt FEM_MaterialFluid - + Material for fluid - Material for fluid + Folyadék anyaga - + Creates a FEM material for fluid - Creates a FEM material for fluid + Létrehoz a folyadéknak egy véges elemes anyagot FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material - Nonlinear mechanical material + Nemlineáris mechanikus anyag - + Creates a nonlinear mechanical material - Creates a nonlinear mechanical material + Létrehoz egy nemlineáris mechanikus anyagot FEM_MaterialReinforced - + Reinforced material (concrete) - Reinforced material (concrete) + Megerősített anyag (beton) - + Creates a material for reinforced matrix material such as concrete - Creates a material for reinforced matrix material such as concrete + Hozzáadja az anyagot megerősített mátrixxal, például betonnal FEM_MaterialSolid - + Material for solid - Material for solid + Szilárd test anyaga - + Creates a FEM material for solid - Creates a FEM material for solid + Szilárd testhez létrehoz egy VEM anyagot FEM_FEMMesh2Mesh - + FEM mesh to mesh - FEM mesh to mesh + VEM, hálótól hálóig - + Convert the surface of a FEM mesh to a mesh - Convert the surface of a FEM mesh to a mesh + Egy VEM háló felületet átalakítja egy hálóvá FEM_MeshBoundaryLayer - + FEM mesh boundary layer - FEM mesh boundary layer + Végeselemes módszer háló határréteg - + Creates a FEM mesh boundary layer - Creates a FEM mesh boundary layer + Hozza létre a Véges elemes háló határréteget FEM_MeshClear - + Clear FEM mesh - Clear FEM mesh + Egyértelmű VEM-háló - + Clear the Mesh of a FEM mesh object - Clear the Mesh of a FEM mesh object + Egy VEM háló tárgy egyértelmű hálója FEM_MeshDisplayInfo - - + + Display FEM mesh info - Display FEM mesh info + VEM háló adatainak megjelenítése FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh - FEM mesh from shape by Gmsh + VEM háló a Gmsh alakzat által - + Create a FEM mesh from a shape by Gmsh mesher - Create a FEM mesh from a shape by Gmsh mesher + Egy VEM háló létrehozása egy Gmsh hálózó alakzatából FEM_MeshGroup - + FEM mesh group - FEM mesh group + VEM háló csoport - + Creates a FEM mesh group - Creates a FEM mesh group + Egy VEM háló csoportot hoz létre FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen - FEM mesh from shape by Netgen + VEM háló alakzat Netgen által - + Create a FEM mesh from a solid or face shape by Netgen internal mesher - Create a FEM mesh from a solid or face shape by Netgen internal mesher + VEM hálót hoz létre szilárd test vagy felület alapján Netgen belső hálózó generátorral FEM_MeshRegion - + FEM mesh region - FEM mesh region + VEM háló terület - + Creates a FEM mesh region - Creates a FEM mesh region + Egy VEM háló területet hoz létre FEM_ResultShow - + Show result Eredmény megjelenítése - + Shows and visualizes selected result data - Shows and visualizes selected result data + Mutatja és megjeleníti a kiválasztott eredmény adatokat FEM_ResultsPurge - + Purge results - Purge results + Eredmények finomítása - + Purges all results from active analysis - Purges all results from active analysis + Az aktív elemzés összes eredményeinek finomítása FEM_SolverCalculixCxxtools - + Solver CalculiX Standard - Solver CalculiX Standard + CalculiX alapértelmezett megoldó - + Creates a standard FEM solver CalculiX with ccx tools - Creates a standard FEM solver CalculiX with ccx tools + Létrehoz egy normál CalculiX VEM megoldót ccx eszközzel FEM_SolverCalculix - + Solver CalculiX (new framework) - Solver CalculiX (new framework) + CalculiX megoldó (új keretrendszer) - + Creates a FEM solver CalculiX new framework (less result error handling) - Creates a FEM solver CalculiX new framework (less result error handling) + Hozzáadja a CalculiX új keretrendszer VEM megoldót (kevesebb eredményhiba kezelése) FEM_SolverControl - + Solver job control - Solver job control + Munka megoldó ellenőrzés - + Changes solver attributes and runs the calculations for the selected solver - Changes solver attributes and runs the calculations for the selected solver + Megoldó attribútumainak módosítása és a kiválasztott megoldó számításainak elindítása FEM_SolverElmer - + Solver Elmer - Solver Elmer + Elmer megoldó - + Creates a FEM solver Elmer - Creates a FEM solver Elmer + Létrehoz egy VEM Z88 megoldót FEM_SolverMystran - + Solver Mystran - Solver Mystran + Mystran megoldó - + Creates a FEM solver Mystran - Creates a FEM solver Mystran + Létrehoz egy VEM Mystran megoldót FEM_SolverRun - + Run solver calculations - Run solver calculations + Megoldó számításainak elindítása - + Runs the calculations for the selected solver - Runs the calculations for the selected solver + A kiválasztott megoldó számításainak elindítása FEM_SolverZ88 - + Solver Z88 - Solver Z88 + Z88 megoldó - + Creates a FEM solver Z88 - Creates a FEM solver Z88 + Létrehoz egy VEM Z88 megoldót @@ -5800,18 +6006,18 @@ vektorát használják irányként Solver Control - Solver Control + Megoldás ellenörző Working Directory - Working Directory + Munka könyvtár Write - Write + Ír @@ -5824,7 +6030,7 @@ vektorát használják irányként Elapsed Time: - Elapsed Time: + Eltelt idő: @@ -5836,17 +6042,17 @@ vektorát használják irányként Re-write - Re-write + Újra ír Re-run - Re-run + Újra futtat Abort - Abort + Megszakít @@ -5867,12 +6073,12 @@ vektorát használják irányként Select Faces/Edges/Vertexes - Select Faces/Edges/Vertexes + Válassza ki a felületeket/éleket/csomópontokat To add references: select them in the 3D view and click "Add". - To add references: select them in the 3D view and click "Add". + Hivatkozások hozzáadásához válassza ki a 3D-s nézetben és kattintson a "Hozzáadás" gombra. @@ -5880,12 +6086,12 @@ vektorát használják irányként Select Solids - Select Solids + Szilárd testek kiválasztása Select elements part of the solid that shall be added to the list. To add the solid click "Add". - Select elements part of the solid that shall be added to the list. To add the solid click "Add". + Válassza ki a listához hozzáadni kívánt szilárd test elemeit. A test hozzáadáshoz kattintson a "Hozzáadás" gombra. @@ -5893,7 +6099,7 @@ vektorát használják irányként Geometry reference selector for a - Geometry reference selector for a + Geometria hivatkozás választó ehhez @@ -5903,17 +6109,17 @@ vektorát használják irányként Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Kattintson a "Hozzáadás" gombra, és jelölje ki a geometriai elemeket a listához adáshoz. {}A következő geometriai elemek közül választhat: {}{}{} {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Ha a listához nem adnak hozzá geometriát, az összes többit használja. Selection mode - Selection mode + Kiválasztás mód @@ -5951,7 +6157,7 @@ vektorát használják irányként Max Shear Stress - Max Shear Stress + Max nyíró erő @@ -5992,13 +6198,13 @@ vektorát használják irányként No histogram available. Please select a result type first. - No histogram available. -Please select a result type first. + Nem áll rendelkezésre hisztogram. +Kérjük, először válassza ki az eredmény típusát. Histogram of {} - Histogram of {} + Hisztogram {} @@ -6008,13 +6214,13 @@ Please select a result type first. Empty result mesh - Empty result mesh + Üres eredmény háló No result object - No result object + Nincs eredmény tárgy @@ -6022,27 +6228,26 @@ Please select a result type first. Constraint current density - Constraint current density + Kényszerítés jelenlegi sűrűsége Creates a FEM constraint current density - Creates a FEM constraint current density + Létrehoz egy VEM jelenlegi sűrűségi kényszerítést FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + Magnetodynamic2D egyenlőség - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Létrehoz egy VEM egyenletet a 2D magnetodinamikus erők számára @@ -6055,30 +6260,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + Elektrosztatikus kötések... Electromagnetic constraints - Electromagnetic constraints + Elektromágneses kötések CmdFEMCompEmEquations - + Fem Végeselemes analízis FEM - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Elektromágneses egyenletek az Elmer megoldóhoz + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm index 29e9dec92c..67052d158b 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index d140364c58..98d1ab6b12 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Applica le modifiche alla pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selezione errata - + Select a pipeline, please. Selezionare una pipeline, per favore. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Taglia i dati lungo una funzione implicita @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Funzioni di filtro - + Functions for use in postprocessing filter... Funzioni per l'uso nel filtro di post-elaborazione... - + Plane Piano - + Sphere Sfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Spessore [mm] - + Stress [MPa] Plot Y-Axis Label Sforzo [MPa] - + Linearized Stresses Plot title Sollecitazioni linearizzate - + Membrane Plot legend item label Membrana - + Membrane and Bending Plot legend item label Membrana e piegatura - + Total Plot legend item label Totale - + Fem Fem - + Stress linearization plot Grafico di linearizzazione dello stress - + Define/create stress linearization plots Definisci/crea grafici di linearizzazione dello stress - - + + Wrong selection Selezione errata - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Crea una pipeline di post-elaborazione da un oggetto risultato - + Wrong selection type Tipo di selezione errato - + Select a result object, please. Per favore seleziona un oggetto risultato @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Crea insieme di nodi - + Create filter Crea filtro - + Create function Crea una funzione. - + Create pipeline from result Crea pipeline dal risultato @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Crea una funzione piano, definita dalla sua origine e una normale al piano - + Create a sphere function, defined by its center and radius Crea una funzione di sfera, definita dal suo centro e raggio @@ -2445,7 +2445,7 @@ Specificare un altro file, per favore. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specificare un altro file, per favore. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 a (%2; %3; %4) è: %5 %6 @@ -2496,7 +2496,7 @@ Specificare un altro file, per favore. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specificare un altro file, per favore. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specificare un altro file, per favore. + Constraint Properties Proprietà del vincolo @@ -3000,61 +3001,189 @@ Specificare un altro file, per favore. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified non specificato + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalare + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Costante Potenziale - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Se il vincolo è per la forza elettrica - + Calculate Electric Force Calcola Forza Elettrica - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specificare un altro file, per favore. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specificare un altro file, per favore. - + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta @@ -3342,7 +3548,7 @@ Specificare un altro file, per favore. - + Do you want to close this dialog? Vuoi chiudere questa finestra di dialogo? @@ -3478,7 +3684,7 @@ Specificare un altro file, per favore. - + Are you sure you want to continue? Sei sicuro di voler continuare? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Dipendenze dell'oggetto @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normale della faccia è usata come direzione setupFilter - + Error: A filter can only be applied to a single object. Errore: Un filtro può essere applicato solo a un singolo oggetto. - - - + + + The filter could not be set up. Il filtro non può essere impostato. - - + + Error: no post processing object selected. Errore: nessun oggetto di post elaborazione selezionato. @@ -5351,12 +5557,12 @@ normale della faccia è usata come direzione FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normale della faccia è usata come direzione FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normale della faccia è usata come direzione FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normale della faccia è usata come direzione FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normale della faccia è usata come direzione FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normale della faccia è usata come direzione FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normale della faccia è usata come direzione FEM_ElementRotation1D - + Beam rotation Rotazione trave - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normale della faccia è usata come direzione FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normale della faccia è usata come direzione FEM_EquationElasticity - + Elasticity equation Equazione di elasticità - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normale della faccia è usata come direzione FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normale della faccia è usata come direzione FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normale della faccia è usata come direzione FEM_EquationElectricforce - + Electricforce equation Equazione forza elettrica - + Creates a FEM equation for electric forces Crea un'equazione FEM per le forze elettriche @@ -5507,12 +5713,12 @@ normale della faccia è usata come direzione FEM_EquationHeat - + Heat equation Equazione di calore - + Creates a FEM equation for heat Crea un'equazione FEM per il calore @@ -5520,8 +5726,8 @@ normale della faccia è usata come direzione FEM_Examples - - + + Open FEM examples Apri esempi FEM @@ -5529,12 +5735,12 @@ normale della faccia è usata come direzione FEM_MaterialEditor - + Material editor Editor dei materiali - + Opens the FreeCAD material editor Apre l'editor dei materiali FreeCAD @@ -5542,12 +5748,12 @@ normale della faccia è usata come direzione FEM_MaterialFluid - + Material for fluid Materiale per fluido - + Creates a FEM material for fluid Crea un materiale FEM per il fluido @@ -5555,12 +5761,12 @@ normale della faccia è usata come direzione FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normale della faccia è usata come direzione FEM_MaterialReinforced - + Reinforced material (concrete) Materiale rinforzato (calcestruzzo) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normale della faccia è usata come direzione FEM_MaterialSolid - + Material for solid Materiale per il solido - + Creates a FEM material for solid Crea un materiale FEM per il solido @@ -5594,12 +5800,12 @@ normale della faccia è usata come direzione FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normale della faccia è usata come direzione FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normale della faccia è usata come direzione FEM_MeshClear - + Clear FEM mesh Elimina le mesh FEM - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normale della faccia è usata come direzione FEM_MeshDisplayInfo - - + + Display FEM mesh info Mostra informazioni FEM mesh @@ -5642,12 +5848,12 @@ normale della faccia è usata come direzione FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normale della faccia è usata come direzione FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normale della faccia è usata come direzione FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normale della faccia è usata come direzione FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normale della faccia è usata come direzione FEM_ResultShow - + Show result Mostra i risultati - + Shows and visualizes selected result data Mostra e visualizza i dati dei risultati selezionati @@ -5707,12 +5913,12 @@ normale della faccia è usata come direzione FEM_ResultsPurge - + Purge results Azzera i risultati - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normale della faccia è usata come direzione FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Risolutore CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Crea un risolutore FEM standard CalculiX con strumenti ccx @@ -5733,12 +5939,12 @@ normale della faccia è usata come direzione FEM_SolverCalculix - + Solver CalculiX (new framework) Solutore CalculiX (nuovo framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Crea un solutore FEM CalculiX nuovo framework (meno gestione degli errori di risultato) @@ -5746,12 +5952,12 @@ normale della faccia è usata come direzione FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Cambia gli attributi di solutore ed esegue i calcoli per il solutore selezionato @@ -5759,12 +5965,12 @@ normale della faccia è usata come direzione FEM_SolverElmer - + Solver Elmer Risolutore Elmer - + Creates a FEM solver Elmer Crea un risolutore FEM Elmer @@ -5772,12 +5978,12 @@ normale della faccia è usata come direzione FEM_SolverMystran - + Solver Mystran Risolutore Mystran - + Creates a FEM solver Mystran Crea un risolutore FEM Mystran @@ -5785,12 +5991,12 @@ normale della faccia è usata come direzione FEM_SolverRun - + Run solver calculations Esegue calcoli del risolutore - + Runs the calculations for the selected solver Esegue i calcoli per il risolutore selezionato @@ -5798,12 +6004,12 @@ normale della faccia è usata come direzione FEM_SolverZ88 - + Solver Z88 Risolutore Z88 - + Creates a FEM solver Z88 Crea un solutore FEM Z88 @@ -6046,12 +6252,12 @@ Per favore seleziona prima un tipo di risultato. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Per favore seleziona prima un tipo di risultato. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm index 26406551c0..36e0b358a6 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 5d33467f0e..345e1da653 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem 有限要素法 - + Apply changes to pipeline パイプラインに変更を適用 - + Apply changes to parameters directly and not on recompute only... 再計算時以外も、パラメーターに変更を直接適用します... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem 有限要素法 - + Region clip filter 領域クリップフィルター - + Define/create a clip filter which uses functions to define the cliped region クリップ領域を定義する関数を使用するクリップフィルターを定義/作成 - + Wrong selection 誤った選択 - + Select a pipeline, please. パイプラインを選択してください。 @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem 有限要素法 - + Function cut filter 関数カットフィルター - + Cut the data along an implicit function 陰関数に従ってデータを切り出し @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem 有限要素法 - + Line clip filter 直線クリップフィルター - + Define/create a clip filter which clips a field along a line 直線に沿って場の値をクリップするクリップフィルターを定義/作成 @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem 有限要素法 - + Data at point clip filter 点データクリップフィルター - + Define/create a clip filter which clips a field data at point 点位置での場の値をクリップするクリップフィルターを定義/作成 @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem 有限要素法 - + Filter functions フィルター関数 - + Functions for use in postprocessing filter... ポスト処理フィルターで使用する関数... - + Plane 平面 - + Sphere 球体 @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label 厚み [mm] - + Stress [MPa] Plot Y-Axis Label 圧力 [MPa] - + Linearized Stresses Plot title 線形化圧力 - + Membrane Plot legend item label 薄膜 - + Membrane and Bending Plot legend item label 膜と曲げ - + Total Plot legend item label 合計 - + Fem 有限要素法 - + Stress linearization plot 応力線形化プロット - + Define/create stress linearization plots 応力線形化プロットの定義/作成 - - + + Wrong selection 誤った選択 - - + + Select a Clip filter which clips a STRESS field along a line, please. 直線に沿って圧力場をクリップするクリップフィルターを選択してください。 @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem 有限要素法 - + Post pipeline from result 結果によるポスト処理パイプライン - + Creates a post processing pipeline from a result object 結果オブジェクトからポスト処理パイプラインを作成 - + Wrong selection type 間違った選択タイプ - + Select a result object, please. 結果オブジェクトを選択してください。 @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem 有限要素法 - + Scalar clip filter スカラークリップフィルター - + Define/create a clip filter which clips a field with a scalar value スカラー値の場をクリップするクリップフィルターを定義/作成 @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem 有限要素法 - + Warp filter たわみフィルター - + Warp the geometry along a vector field by a certain factor ベクトル場に従って一定の係数でジオメトリーをたわめる @@ -669,17 +669,17 @@ 節点セットを作成 - + Create filter フィルターを作成 - + Create function 関数を作成 - + Create pipeline from result 結果からパイプラインを作成 @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal 原点と法線で定義された平面関数を作成 - + Create a sphere function, defined by its center and radius 中心点と半径で定義された球関数を作成 @@ -2432,7 +2432,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function 関数による切り取り、陰関数を選択 @@ -2459,7 +2459,7 @@ Specify another file please. 点位置データのオプション - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2483,7 +2483,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options スカラークリップのオプション @@ -2491,7 +2491,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options たわみのオプション @@ -2973,6 +2973,7 @@ Specify another file please. + Constraint Properties 拘束プロパティ @@ -2987,61 +2988,189 @@ Specify another file please. Potential: ポテンシャル: - - - Electric potential in V - 電位 V - - + + + + + + + + + + + + + + + + + + + + unspecified 未指定 + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + スカラー + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential 拘束で定電位を定義するかどうか - + Potential Constant ポテンシャル定数 - + Whether the constraint defines a farfield potential 拘束でファーフィールドポテンシャルを定義するかどうか - + Farfield / Electric infinity ファーフィールド / 電気的無限遠 - + Whether the constraint is for the electric force 電気力用の拘束かどうか - + Calculate Electric Force 電気力を計算 - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation 容量体積: - + Counter of the body (or face) with a capacitance 静電容量を持つ体積(または面) のカウンター @@ -3195,6 +3324,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3317,7 +3523,7 @@ Specify another file please. - + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています @@ -3329,7 +3535,7 @@ Specify another file please. - + Do you want to close this dialog? このダイアログを閉じますか？ @@ -3465,7 +3671,7 @@ Specify another file please. - + Are you sure you want to continue? 本当に続行しますか？ @@ -3815,7 +4021,7 @@ following referencing objects might be lost: - + Object dependencies オブジェクトの依存関係 @@ -3826,7 +4032,7 @@ following referencing objects might be lost: 関数リストが空ではないため、以下の参照オブジェクトが失われる可能性があります: - + The pipeline is not empty, therefore the following referencing objects might be lost: パイプラインが空ではないため、以下の参照オブジェクトが失われる可能性があります: @@ -5183,20 +5389,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. エラー: フィルタは単一オブジェクトにのみ適用できます。 - - - + + + The filter could not be set up. フィルタを設定できませんでした。 - - + + Error: no post processing object selected. エラー: ポスト処理オブジェクトが選択されていません。 @@ -5330,12 +5536,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5343,12 +5549,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5356,12 +5562,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5369,12 +5575,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5382,12 +5588,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5395,12 +5601,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5408,12 +5614,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5421,12 +5627,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5434,12 +5640,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5447,12 +5653,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5460,12 +5666,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5473,12 +5679,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5486,12 +5692,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5499,8 +5705,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5508,12 +5714,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5521,12 +5727,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5534,12 +5740,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5547,12 +5753,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5560,12 +5766,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5573,12 +5779,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5586,12 +5792,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5599,12 +5805,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5612,8 +5818,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5621,12 +5827,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5634,12 +5840,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5647,12 +5853,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5660,12 +5866,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5673,12 +5879,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result 結果表示 - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5686,12 +5892,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5699,12 +5905,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5712,12 +5918,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5725,12 +5931,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5738,12 +5944,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5751,12 +5957,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5764,12 +5970,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5777,12 +5983,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6025,12 +6231,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6058,19 +6264,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem 有限要素法 - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm index 13bc35238d..69c5ee02a0 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts index b384902139..a46991f94e 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline მილსადენის ცვლილებების გადატარება - + Apply changes to parameters directly and not on recompute only... პარამეტრების ცვლილებების პირდაპირ და არა მხოლოდ გადათვლისას გადატარება... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter არეალის კვეთის ფილტრი - + Define/create a clip filter which uses functions to define the cliped region ფილტრის აღწერა/შექმნა, რომელიც კვეთის არეალის აღსაწერად ფუნქციებს იყენებს - + Wrong selection არასწორი არჩევანი - + Select a pipeline, please. გთხოვთ, აირჩიოთ მილსადენი. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter ამოჭრის ფუნქციის ფილტრი - + Cut the data along an implicit function მონაცემების არაცხადი ფუნქციის გასწვრივ კვეთა @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter ხაზის კვეთის ფილტრი - + Define/create a clip filter which clips a field along a line ფილტრის აღწერა/შექმნა, რომელიც ველს ხაზის გასწვრივ კვეთს @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter მონაცემების ფილტრი წერტილის ჭრილზე - + Define/create a clip filter which clips a field data at point ფილტრის აღწერა/შექმნა, რომელიც ველის მონაცემებს წერტილზე კვეთს @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions ფილტრის ფუნქციები - + Functions for use in postprocessing filter... პოსტპროცესორის ფილტრის მიერ გამოყენებული ფუნქციები... - + Plane სიბრტყე - + Sphere სფერო @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label სისქე [mm] - + Stress [MPa] Plot Y-Axis Label მექანიკური ძაბვა [MPa] - + Linearized Stresses Plot title ლინეარიზირებული ძაბვა - + Membrane Plot legend item label მემბრანა - + Membrane and Bending Plot legend item label მემბრანა და ღუნვა - + Total Plot legend item label სულ - + Fem Fem - + Stress linearization plot დეფორმაციის ხაზოვნების დახაზვა - + Define/create stress linearization plots განსაზღვრეთ/დაამატეთ სტრესის ხაზოვანი ნახაზები - - + + Wrong selection არასწორი არჩევანი - - + + Select a Clip filter which clips a STRESS field along a line, please. გთხოვთ, აირჩიეთ კვეთს ფილტრი, რომელიც სტრესის ველს ხაზის გასწვრივ კვეთს. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result მაჩვენე მილსადენი შედეგიდან - + Creates a post processing pipeline from a result object შედეგის ობიექტიდან მილსადენის პოსტპროცესინგის შექმნა - + Wrong selection type მონიშნულის არასწორი ტიპი - + Select a result object, please. გთხოვთ მონიშნოთ შედეგი. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter სკალარის კვეთის ფილტრი - + Define/create a clip filter which clips a field with a scalar value ფილტრის აღწერა/შექმნა, რომელიც ველს სკალარული მნიშვნელობით კვეთს @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter დეფორმაციის ვიზუალიზაციის ფილტრი - + Warp the geometry along a vector field by a certain factor გეომეტრიის მითითებული ფაქტორით დეფორმაცია ვექტორული ველის გასწვრივ @@ -669,17 +669,17 @@ კვანძების ჯგუფის შექმნა - + Create filter ფილტრის შექმნა - + Create function ფუნქციის შექმნა - + Create pipeline from result შედეგიდან მილსადენის შექმნა @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal შექმენით სიბრტყის ფუნქცია, აღწერილი მისი საწყისი წერტილითა და ნორმალით - + Create a sphere function, defined by its center and radius შექმენით სფეროს ფუნქცია, აღწერილი მისი ცენტრით და რადიუსით @@ -2437,7 +2437,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function ფუნქციის კვეთა, აირჩიეთ არაცხადი ფუნქცია @@ -2464,7 +2464,7 @@ Specify another file please. წერტილის მონაცემების პარამეტრები - + %1 at (%2; %3; %4) is: %5 %6 %1 მისამართზე (%2; %3; %4) არის: %5 %6 @@ -2488,7 +2488,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options სკალარის ფილტრის მორგება @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options გადატანის პარამეტრები @@ -2978,6 +2978,7 @@ Specify another file please. + Constraint Properties შეზღუდვის თვისებები @@ -2992,61 +2993,189 @@ Specify another file please. Potential: პოტენციალი: - - - Electric potential in V - ელექტრული პოტენციალი ვოლტებში - - + + + + + + + + + + + + + + + + + + + + unspecified არ არის მითითებული + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + სკალარული + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential განსაზღვრავს თუ არა შეზღუდვა მუდმივ პოტენციალს - + Potential Constant პოტენციალის კონსტანტა - + Whether the constraint defines a farfield potential განსაზღვრავს თუ არა შეზღუდვა შორი ველის პოტენციალს - + Farfield / Electric infinity შორი ველი / ელექტრო უსასრულობა - + Whether the constraint is for the electric force არის თუ არა შეზღუდვა ელექტრული ძალისთვის - + Calculate Electric Force ელექტრული ძალის გამოთვლა - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation სხეულის ტევადობა: - + Counter of the body (or face) with a capacitance ტევადობის მქონე სხეულის (ან ზედაპირის) მთვლელი @@ -3198,7 +3327,84 @@ Specify another file please. Current density: - Current density: + მიმდინარე სიმკვრივე: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3322,7 +3528,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3334,7 +3540,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3470,7 +3676,7 @@ Specify another file please. - + Are you sure you want to continue? დარწმუნებული ბრძანდებით, რომ გნებავთ გააგრძელოთ? @@ -3823,7 +4029,7 @@ following referencing objects might be lost: - + Object dependencies ობიექტის დამოკიდებულებები @@ -3835,7 +4041,7 @@ following referencing objects might be lost: შემდეგი ბმის ობიექტები შეიძლება დაიკარგოს: - + The pipeline is not empty, therefore the following referencing objects might be lost: მილსადენი ცარიელი არაა, ამიტომ @@ -5194,20 +5400,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. შეცდომა: ფილტრი მხოლოდ ერთ ობიექტზე შეიძლება გადატარდეს. - - - + + + The filter could not be set up. ფილტრის მორგება შეუძლებელია. - - + + Error: no post processing object selected. შეცდომა: პოსტპროცესინგის ობიექტი მონიშნული არაა. @@ -5341,12 +5547,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint განივი კვეთის შეზღუდვა - + Creates a FEM constraint sectionprint სემ განივი კვეთის შეზღუდვის შექმნა @@ -5354,12 +5560,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight საკუთარი წონის შეზღუდვა - + Creates a FEM constraint self weight საკუთარი წონის სემ შეზღუდვის შექმნა @@ -5367,12 +5573,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie კავშირის შეზღუდვა - + Creates a FEM constraint tie სემ კავშირის შეზღუდვის შექმნა @@ -5380,12 +5586,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow სითხის კვეთა 1D დინებისთვის - + Creates a FEM fluid section for 1D flow სემ სითხის 1D დინების კვეთის შექმნა @@ -5393,12 +5599,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section კოჭის კვეთი - + Creates a FEM beam cross section სემ კოჭის კვეთის სექციის შექმნა @@ -5406,12 +5612,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness გარსის ფილის სისქე - + Creates a FEM shell plate thickness სემ გარსის ფილის სისქის შექმნა @@ -5419,12 +5625,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation კოჭის მობრუნება - + Creates a FEM beam rotation სემ კოჭის შემობრუნების შექმნა @@ -5432,12 +5638,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation ელექტროსტატიკური ტოლობა - + Creates a FEM equation for electrostatic სემ ელექტროსტატიკური განტოლების შექმნა @@ -5445,12 +5651,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation დრეკადობის განტოლება - + Creates a FEM equation for elasticity სემ ელასტიურობის განტოლების შექმნა @@ -5458,12 +5664,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation დინების ტოლობა - + Creates a FEM equation for flow სემ დინების განტოლების შექმნა @@ -5471,12 +5677,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation ნაკადის განტოლება - + Creates a FEM equation for flux სემ ნაკადის განტოლების შექმნა @@ -5484,12 +5690,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation ელექტროძალის განტოლება - + Creates a FEM equation for electric forces ელექტრო ძალების სემ განტოლების შექმნა @@ -5497,12 +5703,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation სითბოს ფორმულა - + Creates a FEM equation for heat სემ სითბოს განტოლების შექმნა @@ -5510,8 +5716,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples სემ მაგალითების გახსნა @@ -5519,12 +5725,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor მასალების რედაქტორი - + Opens the FreeCAD material editor FreeCAD-ის მასალების რედაქტორის გახსნა @@ -5532,12 +5738,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid დენადი მასალა - + Creates a FEM material for fluid სითვისთვის სემ მასალის შექმნა @@ -5545,12 +5751,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material არახაზოვანი მექანიკური მასალა - + Creates a nonlinear mechanical material არახაზოვანი მექანიკური მასალის შექმნა @@ -5558,12 +5764,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) არმირებული მასალა (ბეტონი) - + Creates a material for reinforced matrix material such as concrete არმირებული მატრიცული მასალის, მაგალითად რკინაბეტონის შექმნა @@ -5571,12 +5777,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid მყარი მასალა - + Creates a FEM material for solid სითხისთვის სემ მასალის შექმნა @@ -5584,12 +5790,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh სემ ბადიდან ბადემდე - + Convert the surface of a FEM mesh to a mesh სემ ბადის ზედაპირის ბადედ გარდაქმნა @@ -5597,12 +5803,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer სემ ბადის სასაზღვრო ფენა - + Creates a FEM mesh boundary layer სემ ბადის შემომსაზღვრელი შრის შექმნა @@ -5610,12 +5816,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh სემ ბადის გასუფთავება - + Clear the Mesh of a FEM mesh object ბადის ან სემ ბადის ობიექტის გასუფთავება @@ -5623,8 +5829,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info სემ ბადის ინფორმაციის ჩვენება @@ -5632,12 +5838,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh მონახაზიდან სემ ბადის Gmsh-ის გამოყენებით შექმნა - + Create a FEM mesh from a shape by Gmsh mesher მოხაზულობიდან Gmsh-ის მეშვეობით სემ ბადის შექმნა @@ -5645,12 +5851,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group სემ ბადეების ჯგუფი - + Creates a FEM mesh group სემ ბადის ჯგუფის შექმნა @@ -5658,12 +5864,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen მონახაზიდან სემ ბადის Netgen-ის გამოყენებით შექმნა - + Create a FEM mesh from a solid or face shape by Netgen internal mesher სემ ბადის მყარი სხეულისაგან ან ზედაპირის მოხაზულობისგან Netgen შიდა მეშერით შექმნა @@ -5671,12 +5877,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region სემ ბადის რეგიონი - + Creates a FEM mesh region სემ ბადის რეგიონის შექმნა @@ -5684,12 +5890,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result შედეგების ჩვენება - + Shows and visualizes selected result data შედეგის მონიშნული მონაცემების ჩვენება და ვიზუალიზაცია @@ -5697,12 +5903,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results შედეგების გასუფთავება - + Purges all results from active analysis აქტიური ანალიზის ყველა შედეგის წაშლა @@ -5710,12 +5916,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard ამომხსნელის CalculiX სტანდარტი - + Creates a standard FEM solver CalculiX with ccx tools Cxx ხელსაწყოებით სტანდარტული CalculiX სემ ამომხსნელის შექმნა @@ -5723,12 +5929,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) ამომხსნელი CalculiX-ი (ახალი framework) - + Creates a FEM solver CalculiX new framework (less result error handling) სემ ამომხსნელის CalculiX ახალი Framework-ით შექმნა (ნაკლები შედეგის შეცდომები) @@ -5736,12 +5942,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control გადამწყვეტის ამოცანების კონტროლი - + Changes solver attributes and runs the calculations for the selected solver ცვლის ამომხსნელის ატრიბუტებს და აწარმოებს გამოთვლებს არჩეული ამომხსნელისთვის @@ -5749,12 +5955,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer გადამწყვეტი Elmder - + Creates a FEM solver Elmer სემ „Elmer“ ამოხსნელის შექმნა @@ -5762,12 +5968,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Mystran ამომხსნელი - + Creates a FEM solver Mystran სემ „Mystran“ ამოხსნელის შექმნა @@ -5775,12 +5981,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations ამომხსნელის გამოთვლების გაშვება - + Runs the calculations for the selected solver გამოთვლების არჩეული ამომხსნელით გაშვება @@ -5788,12 +5994,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 გადამწყვეტი Z88 - + Creates a FEM solver Z88 სემ Z88 ამოხსნელისთვის ამოცანის შექმნა @@ -6025,27 +6231,27 @@ Please select a result type first. Constraint current density - Constraint current density + მიმდინარე სიმკვრივის შეზღუდვა Creates a FEM constraint current density - Creates a FEM constraint current density + მიმდინარე სემ სიმკვრივის შეზღუდვის შექმნა FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + მაგნეტოდინამიკური 2D ტოლობა - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + სემ განტოლების შექმნა +2D მაგენტოდინამიკური ძალებისთვის @@ -6058,30 +6264,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + ელექტრომაგნიტური შეზღუდვები... Electromagnetic constraints - Electromagnetic constraints + ელექტრომაგნიტური შეზღუდვები CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + ელექტრომაგნიტური ტოლობები Elmber ამომხსნელისთვის + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm index 45eec6abec..34631c85a1 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index 6e96bb07d7..07b7cd44bd 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection 잘못 된 선택 - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane 평면 - + Sphere 공모양 @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label 합계 - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection 잘못 된 선택 - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? 다이얼로그를 닫으시겠습니까? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies 객체 종속성 @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result 결과 표시 - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm index 9a529aa0bd..93a4528bc2 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index e69d49a3c3..7dfa663b58 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem EEM - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem EEM - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Verkeerde selectie - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem EEM - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem EEM - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem EEM - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem EEM - + Filter functions Filter functies - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Vlak - + Sphere Bol @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Dikte (mm) - + Stress [MPa] Plot Y-Axis Label Spanning [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membraan - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Totaal - + Fem EEM - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Verkeerde selectie - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem EEM - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Verkeerd selectietype - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem EEM - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem EEM - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Set knooppunten aanmaken - + Create filter Maak een filter aan - + Create function Functie maken - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 bij (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potentieel: - - - Electric potential in V - Elektrisch potentieel in V - - + + + + + + + + + + + + + + + + + + + + unspecified ongespecificeerd + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potentiële constante - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Bereken Elektrische Kracht - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Weet u zeker dat u wilt doorgaan? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Object afhankelijkheden @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Toon resultaat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem EEM - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index c7173832a2..91218463fc 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index c7b4350910..41edfb8b24 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem MES - + Apply changes to pipeline Zastosuj zmiany do rurociągu - + Apply changes to parameters directly and not on recompute only... Zastosuj zmiany bezpośrednio do parametrów, nie tylko do ponownego przeliczenia... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem MES - + Region clip filter Filtr przycięcia obszaru - + Define/create a clip filter which uses functions to define the cliped region Zdefiniuj / dodaj filtr przycinania, który używa funkcji do określenia przyciętego obszaru - + Wrong selection Niewłaściwy wybór - + Select a pipeline, please. Proszę wybrać rurociąg. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem MES - + Function cut filter Filtr cięcia funkcją - + Cut the data along an implicit function Wytnij dane wzdłuż niejawnej funkcji @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem MES - + Line clip filter Filtr przycięcia linią - + Define/create a clip filter which clips a field along a line Zdefiniuj / dodaj filtr przycinania, który przycina pole wzdłuż linii @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem MES - + Data at point clip filter Filtr danych w punkcie - + Define/create a clip filter which clips a field data at point Zdefiniuj / dodaj filtr przycinania, który przycina dane pola w punkcie @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem MES - + Filter functions Funkcje filtrów - + Functions for use in postprocessing filter... Funkcje do użycia w filtrze do obróbki wyników... - + Plane Płaszczyzna - + Sphere Sfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Grubość [mm] - + Stress [MPa] Plot Y-Axis Label Naprężenia [MPa] - + Linearized Stresses Plot title Naprężenia ukierunkowane liniowo - + Membrane Plot legend item label Naprężenie membranowe - + Membrane and Bending Plot legend item label Naprężenie membranowe i zginające - + Total Plot legend item label Łącznie - + Fem MES - + Stress linearization plot Wykres linearyzacji naprężeń - + Define/create stress linearization plots Zdefiniuj / dodaj wykresy linearyzacji naprężeń - - + + Wrong selection Niewłaściwy wybór - - + + Select a Clip filter which clips a STRESS field along a line, please. Wybierz filtr przycinania, który przycina pole naprężeń wzdłuż linii. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem MES - + Post pipeline from result Utwórz ciąg z wyniku - + Creates a post processing pipeline from a result object Tworzy ciąg do obróbki danych z obiektu wyników - + Wrong selection type Niewłaściwy typ wyboru - + Select a result object, please. Wybierz obiekt wyników. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem MES - + Scalar clip filter Filtr przycinania skalarnego - + Define/create a clip filter which clips a field with a scalar value Zdefiniuj / dodaj filtr przycinania, który przycina pole wartością skalarną @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem MES - + Warp filter Filtr wizualizacji deformacji - + Warp the geometry along a vector field by a certain factor Zdeformuj geometrię wzdłuż pola wektorowego o określony współczynnik @@ -669,17 +669,17 @@ Utwórz zestaw węzłów - + Create filter Utwórz filtr - + Create function Utwórz cechę - + Create pipeline from result Utwórz ciąg z wyniku @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Utwórz funkcję płaszczyzny, zdefiniowaną przez jej początek i kierunek normalny - + Create a sphere function, defined by its center and radius Utwórz funkcję kuli, zdefiniowaną przez jej środek i promień @@ -1881,7 +1881,7 @@ Wybierz inny plik. Selection error - Błąd zaznaczenia + Błąd selekcji @@ -1942,7 +1942,7 @@ Wybierz inny plik. Selection error - Błąd selekcji + Błąd zaznaczenia @@ -2129,7 +2129,7 @@ Wybierz inny plik. Selection error - Błąd wyboru + Błąd selekcji @@ -2167,7 +2167,7 @@ Wybierz inny plik. Selection error - Błąd selekcji + Błąd wyboru @@ -2437,7 +2437,7 @@ Wybierz inny plik. FemGui::TaskPostCut - + Function cut, choose implicit function Funkcja cięcia, wybierz funkcję niejawną @@ -2464,7 +2464,7 @@ Wybierz inny plik. Opcje danych w punkcie - + %1 at (%2; %3; %4) is: %5 %6 %1 w (%2; %3; %4) to: %5 %6 @@ -2488,7 +2488,7 @@ Wybierz inny plik. FemGui::TaskPostScalarClip - + Scalar clip options Opcje przycinania skalarnego @@ -2496,7 +2496,7 @@ Wybierz inny plik. FemGui::TaskPostWarpVector - + Warp options Opcje wizualizacji deformacji @@ -2978,6 +2978,7 @@ Wybierz inny plik. + Constraint Properties Właściwości wiązań @@ -2992,61 +2993,189 @@ Wybierz inny plik. Potential: Potencjał: - - - Electric potential in V - Potencjał elektryczny w V - - + + + + + + + + + + + + + + + + + + + + unspecified nieokreślony + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Skalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Czy wiązanie definiuje stały potencjał - + Potential Constant Definicja potencjału elektrostatycznego - + Whether the constraint defines a farfield potential Czy wiązanie definiuje potencjał pola dalekiego - + Farfield / Electric infinity Dalekie pole / nieskończoność elektryczna - + Whether the constraint is for the electric force Czy wiązanie dotyczy siły elektrycznej - + Calculate Electric Force Oblicz siłę elektrostatyczną - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Jednostka przepustowa: - + Counter of the body (or face) with a capacitance Licznik bryły (lub ściany) z pojemnością @@ -3198,7 +3327,84 @@ Wybierz inny plik. Current density: - Current density: + Gęstość prądu: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3322,7 +3528,7 @@ Wybierz inny plik. - + A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań @@ -3334,7 +3540,7 @@ Wybierz inny plik. - + Do you want to close this dialog? Czy chcesz zamknąć to okno dialogowe? @@ -3470,7 +3676,7 @@ Wybierz inny plik. - + Are you sure you want to continue? Czy na pewno chcesz kontynuować? @@ -3823,7 +4029,7 @@ następujące obiekty odniesienia mogą zostać utracone: - + Object dependencies Zależności obiektów @@ -3835,7 +4041,7 @@ following referencing objects might be lost: następujące obiekty odniesienia mogą zostać utracone: - + The pipeline is not empty, therefore the following referencing objects might be lost: Proces nie jest pusty, dlatego @@ -5194,20 +5400,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Błąd: Filtr może być zastosowany tylko do pojedynczego obiektu. - - - + + + The filter could not be set up. Nie można skonfigurować filtra. - - + + Error: no post processing object selected. Błąd: nie wybrano obiektu przetwarzania końcowego. @@ -5341,12 +5547,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Zapis wyników z przekroju - + Creates a FEM constraint sectionprint Dodaje zapis wyników z przekroju @@ -5354,12 +5560,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Zdefiniuj obciążenie ciężarem własnym - + Creates a FEM constraint self weight Definiuje obciążenie ciężarem własnym @@ -5367,12 +5573,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Kontakt wiązany - + Creates a FEM constraint tie Dodaje kontakt wiązany @@ -5380,12 +5586,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Przekrój płynu dla przepływu 1D - + Creates a FEM fluid section for 1D flow Tworzy przekrój płynu MES dla przepływu 1D @@ -5393,12 +5599,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Przekrój poprzeczny belki - + Creates a FEM beam cross section Tworzy przekrój poprzeczny belki @@ -5406,12 +5612,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Grubość powłoki - + Creates a FEM shell plate thickness Tworzy grubość powłoki @@ -5419,12 +5625,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Obrót belki - + Creates a FEM beam rotation Tworzy skręt belki @@ -5432,12 +5638,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Równanie elektrostatyczne - + Creates a FEM equation for electrostatic Tworzy równanie MES dla elektrostatyki @@ -5445,12 +5651,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Równanie elastyczności - + Creates a FEM equation for elasticity Tworzy równanie MES dla elastyczności @@ -5458,12 +5664,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Równania przepływu - + Creates a FEM equation for flow Tworzy równanie MES dla przepływu @@ -5471,12 +5677,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Równanie strumienia - + Creates a FEM equation for flux Tworzy równanie MES dla strumienia @@ -5484,12 +5690,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Równanie siły elektrostatycznej - + Creates a FEM equation for electric forces Tworzy równanie dla sił elektrostatycznych @@ -5497,12 +5703,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Równanie ciepła - + Creates a FEM equation for heat Tworzy równanie MES dla ciepła @@ -5510,8 +5716,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Otwórz przykłady @@ -5519,12 +5725,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Edytor materiału - + Opens the FreeCAD material editor Otwiera edytor materiałów FreeCAD @@ -5532,12 +5738,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Materiał dla płynu - + Creates a FEM material for fluid Tworzy materiał MES dla płynu @@ -5545,12 +5751,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nieliniowy materiał mechaniczny - + Creates a nonlinear mechanical material Tworzy nieliniowy materiał mechaniczny @@ -5558,12 +5764,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Materiał zbrojony (beton) - + Creates a material for reinforced matrix material such as concrete Tworzy materiał do wzmocnionego materiału matrycowego, takiego jak beton @@ -5571,12 +5777,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Materiał dla bryły - + Creates a FEM material for solid Tworzy materiał MES dla bryły @@ -5584,12 +5790,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh Siatka MES do siatki - + Convert the surface of a FEM mesh to a mesh Konwertuj powierzchnię siatki MES na siatkę @@ -5597,12 +5803,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer Warstwa graniczna siatki MES - + Creates a FEM mesh boundary layer Tworzy warstwę graniczną siatki MES @@ -5610,12 +5816,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Wyczyść dane siatki MES - + Clear the Mesh of a FEM mesh object Wyczyść dane Siatki z obiektu siatki MES @@ -5623,8 +5829,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Wyświetl informacje o siatce MES @@ -5632,12 +5838,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh Siatka MES z kształtu przy pomocy generatora Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Tworzy siatkę MES z kształtu przy użyciu generatora siatki Gmsh @@ -5645,12 +5851,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group Grupa siatki MES - + Creates a FEM mesh group Tworzy grupę siatki MES @@ -5658,12 +5864,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen Siatka MES z kształtu przy pomocy generatora Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Tworzy siatkę MES z bryły lub kształtu powierzchni przez wewnętrzny generator siatki Netgen @@ -5671,12 +5877,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region Obszar siatki MES - + Creates a FEM mesh region Tworzy obszar siatki MES @@ -5684,12 +5890,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Pokaż wynik - + Shows and visualizes selected result data Pokazuje i wizualizuje wybrane wyniki @@ -5697,12 +5903,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Usuń wyniki - + Purges all results from active analysis Usuwa wszystkie wyniki z aktywnej analizy @@ -5710,12 +5916,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Standardowy solver CalculiX - + Creates a standard FEM solver CalculiX with ccx tools Tworzy standardowy solver MES CalculiX korzystając z narzędzi ccx @@ -5723,12 +5929,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (nowa struktura) - + Creates a FEM solver CalculiX new framework (less result error handling) Dodaje solver CalculiX z nową strukturą (mniejsza obsługa błędów wynikowych) @@ -5736,12 +5942,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Kontrola pracy solvera - + Changes solver attributes and runs the calculations for the selected solver Zmienia atrybuty solvera i uruchamia obliczenia dla wybranego solvera @@ -5749,12 +5955,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Dodaje solver MES w Elmer @@ -5762,12 +5968,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Tworzy analizę MES w Mystran @@ -5775,12 +5981,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Uruchom obliczenia solvera - + Runs the calculations for the selected solver Uruchamia obliczenia dla wybranego solvera @@ -5788,12 +5994,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Tworzy analizę MES w Z88 @@ -6025,27 +6231,27 @@ Proszę najpierw wybrać typ wyniku. Constraint current density - Constraint current density + Obciążenie gęstością prądu elektrycznego Creates a FEM constraint current density - Creates a FEM constraint current density + Definiuje obciążenie gęstością prądu elektrycznego FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + Równanie magnetodynamiki 2D - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Tworzy równanie MES dla +sił magnetodynamicznych 2D @@ -6058,30 +6264,58 @@ Proszę najpierw wybrać typ wyniku. Electromagnetic constraints... - Electromagnetic constraints... + Wiązania elektromagnetyczne ... Electromagnetic constraints - Electromagnetic constraints + Wiązania elektromagnetyczne CmdFEMCompEmEquations - + Fem MES - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Równania elektromagnetyczne dla solvera Elmer + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm index ae6434df3d..e57cd8903d 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index 35df6cf20b..fc85640388 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem MEF - + Apply changes to pipeline Aplicar alterações ao pipeline - + Apply changes to parameters directly and not on recompute only... Aplica as alterações dos parâmetros diretamente e não apenas na recalculação... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem MEF - + Region clip filter Filtro de recorte de região - + Define/create a clip filter which uses functions to define the cliped region Definir/criar um filtro que utiliza funções para definir uma região a ser recortada - + Wrong selection Seleção errada - + Select a pipeline, please. Selecione um pipeline. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem MEF - + Function cut filter Função filtro de corte - + Cut the data along an implicit function Recorta os dados por meio de uma função implícita @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem MEF - + Line clip filter Filtro de recorte de linha - + Define/create a clip filter which clips a field along a line Definir / criar um filtro que recorta um campo ao longo de uma linha @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem MEF - + Data at point clip filter Dados no ponto do filtro - + Define/create a clip filter which clips a field data at point Definir / criar um filtro que recorda um campo de dados em um ponto @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem MEF - + Filter functions Funções de filtro - + Functions for use in postprocessing filter... Funções para uso em filtro pós-processamento... - + Plane Plano - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Espessura (mm) - + Stress [MPa] Plot Y-Axis Label Resistência à compressão (MPa) - + Linearized Stresses Plot title Estresse linear - + Membrane Plot legend item label Membrana - + Membrane and Bending Plot legend item label Membrana e curvatura - + Total Plot legend item label Total - + Fem MEF - + Stress linearization plot Gráfico de estresse linear - + Define/create stress linearization plots Definir/criar gráficos de estresse linear - - + + Wrong selection Seleção errada - - + + Select a Clip filter which clips a STRESS field along a line, please. Selecione um filtro que corta um campo de controle de estresse ao longo de uma linha. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem MEF - + Post pipeline from result Pipeline de pós-processamento a partir de um resultado - + Creates a post processing pipeline from a result object Cria um pipeline de pós-processamento a partir de um objeto de resultado - + Wrong selection type Tipo de seleção errado - + Select a result object, please. Por favor selecione um objeto de resultado. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem MEF - + Scalar clip filter Filtro de recorte escalar - + Define/create a clip filter which clips a field with a scalar value Definir / criar um filtro que recorda um campo de dados com um valor escalar @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem MEF - + Warp filter Filtro de deformação - + Warp the geometry along a vector field by a certain factor Deforma a geometria ao longo de um campo de vetores por um determindado fator @@ -669,17 +669,17 @@ Criar conjunto de nós - + Create filter Criar filtro - + Create function Criar função - + Create pipeline from result Criar pipeline a partir do resultado @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Função criação de plano, definido por sua origem e direção normal - + Create a sphere function, defined by its center and radius Função criação de esfera, definida por seu centro e raio @@ -2444,7 +2444,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2471,7 +2471,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2495,7 +2495,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2503,7 +2503,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2985,6 +2985,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -2999,61 +3000,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3207,6 +3336,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3329,7 +3535,7 @@ Specify another file please. - + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas @@ -3341,7 +3547,7 @@ Specify another file please. - + Do you want to close this dialog? Deseja fechar este diálogo? @@ -3477,7 +3683,7 @@ Specify another file please. - + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3830,7 +4036,7 @@ following referencing objects might be lost: - + Object dependencies Dependências do objeto @@ -3842,7 +4048,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5203,20 +5409,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5350,12 +5556,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5363,12 +5569,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5376,12 +5582,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5389,12 +5595,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5402,12 +5608,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5415,12 +5621,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5428,12 +5634,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5441,12 +5647,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5454,12 +5660,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5467,12 +5673,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5480,12 +5686,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5493,12 +5699,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Equação de força elétrica - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5506,12 +5712,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5519,8 +5725,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5528,12 +5734,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5541,12 +5747,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5554,12 +5760,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5567,12 +5773,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5580,12 +5786,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5593,12 +5799,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5606,12 +5812,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5619,12 +5825,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5632,8 +5838,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5641,12 +5847,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5654,12 +5860,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5667,12 +5873,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5680,12 +5886,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5693,12 +5899,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Mostrar resultado - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5706,12 +5912,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5719,12 +5925,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5732,12 +5938,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5745,12 +5951,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5758,12 +5964,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5771,12 +5977,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5784,12 +5990,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5797,12 +6003,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6045,12 +6251,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6078,19 +6284,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem MEF - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm index f2e6e0430a..4b0555c1de 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 6df8949c90..cf48ec1476 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Seleção errada - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plano - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Seleção errada - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Deseja fechar esta janela? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Dependências do objeto @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Equação de força elétrica - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Mostrar resultado - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm index c36cae085d..4a085b6618 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 307f664c7d..820e97538d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Metoda elementelor finite - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Metoda elementelor finite - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selecţie greşită - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Metoda elementelor finite - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Metoda elementelor finite - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Metoda elementelor finite - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Metoda elementelor finite - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plan - + Sphere Sfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Metoda elementelor finite - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Selecţie greşită - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Metoda elementelor finite - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Metoda elementelor finite - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Metoda elementelor finite - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Dependențe obiect @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Arată rezultatul - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Metoda elementelor finite - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm index 6c1015e420..dcbaf90ee1 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index ec197a2d7d..c2b8bb6b07 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem МКЭ (метод конечных элементов) - + Apply changes to pipeline Применить изменения к конвейеру (пайплайну) - + Apply changes to parameters directly and not on recompute only... Применять изменения к параметрам напрямую, а не только при пересчете... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem МКЭ (метод конечных элементов) - + Region clip filter Фильтр области обрезки - + Define/create a clip filter which uses functions to define the cliped region Определите/создайте фильтр обрезки, который использует функции для определения области обрезки - + Wrong selection Неправильный выбор - + Select a pipeline, please. Выберите конвейер (пайплайн), пожалуйста. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem МКЭ (метод конечных элементов) - + Function cut filter Функциональный фильтр - + Cut the data along an implicit function Вырезать данные по неявной функции @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem МКЭ (метод конечных элементов) - + Line clip filter Фильтр обрезки линии - + Define/create a clip filter which clips a field along a line Определите/создайте фильтр обрезки, который обрезает поле вдоль линии @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem МКЭ (метод конечных элементов) - + Data at point clip filter Данные в фильтре обрезки точки - + Define/create a clip filter which clips a field data at point Определите/создайте фильтр обрезки, который отсекает данные поля в точке @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem МКЭ (метод конечных элементов) - + Filter functions Функции фильтра - + Functions for use in postprocessing filter... Функции для использования в фильтре постобработки... - + Plane Плоскость - + Sphere Сфера @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Толщина [mm] - + Stress [MPa] Plot Y-Axis Label Механическое напряжение [MPa] - + Linearized Stresses Plot title Линеаризованные напряжения - + Membrane Plot legend item label Мембрана - + Membrane and Bending Plot legend item label Мембрана и Изгиб - + Total Plot legend item label Итог - + Fem МКЭ (метод конечных элементов) - + Stress linearization plot График линеаризации напряжения - + Define/create stress linearization plots Определение/создание графиков линеаризации напряжения - - + + Wrong selection Неправильный выбор - - + + Select a Clip filter which clips a STRESS field along a line, please. Пожалуйста, выберите фильтр обрезки, который обрезает поле STRESS вдоль линии. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem МКЭ (метод конечных элементов) - + Post pipeline from result Опубликовать конвейер из результата - + Creates a post processing pipeline from a result object Создает конвейер постобработки из результирующего объекта - + Wrong selection type Неправильный тип выбора - + Select a result object, please. Выберите результирующий объект, пожалуйста. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem МКЭ (метод конечных элементов) - + Scalar clip filter Скалярный фильтр обрезки - + Define/create a clip filter which clips a field with a scalar value Определите/создайте фильтр обрезки, который отсекает поле со скалярным значением @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem МКЭ (метод конечных элементов) - + Warp filter Деформационный фильтр - + Warp the geometry along a vector field by a certain factor Деформировать геометрию вдоль векторного поля по определенному коэффициенту @@ -669,17 +669,17 @@ Создать набор узлов - + Create filter Создать фильтр - + Create function Создать функцию - + Create pipeline from result Создать конвейер из результата @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Создайте плоскую функцию, определяемую ее началом и нормалью - + Create a sphere function, defined by its center and radius Создайте функцию сферы, заданную ее центром и радиусом @@ -2433,7 +2433,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2460,7 +2460,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2484,7 +2484,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2492,7 +2492,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Опции деформации @@ -2974,6 +2974,7 @@ Specify another file please. + Constraint Properties Свойства Ограничения @@ -2988,61 +2989,189 @@ Specify another file please. Potential: Потенциал: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified не указана + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + у + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force - Calculate Electric Force + Вычислить электростатические силы - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3194,7 +3323,84 @@ Specify another file please. Current density: - Current density: + Плотность потока: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3318,7 +3524,7 @@ Specify another file please. - + A dialog is already open in the task panel Диалог уже открыт в панели задач @@ -3330,7 +3536,7 @@ Specify another file please. - + Do you want to close this dialog? Вы хотите закрыть этот диалог? @@ -3435,7 +3641,7 @@ Specify another file please. Edges - Edges + Рёбра @@ -3445,7 +3651,7 @@ Specify another file please. Polygons - Polygons + Полигоны @@ -3466,7 +3672,7 @@ Specify another file please. - + Are you sure you want to continue? Вы уверены, что хотите продолжить? @@ -3606,8 +3812,8 @@ and colors the result mesh accordingly Enter here an equation to be calculated. For possible variables, see the description box below. - Enter here an equation to be calculated. -For possible variables, see the description box below. + Введите здесь уравнение для вычисления. +Возможные переменные найдёте в поле описания ниже. @@ -3622,7 +3828,7 @@ For possible variables, see the description box below. Available result types: - Available result types: + Доступные типы результатов: @@ -3819,7 +4025,7 @@ following referencing objects might be lost: - + Object dependencies Зависимости объектов @@ -3831,7 +4037,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5028,7 +5234,7 @@ normal vector of the face is used as direction Tetrahedron count: - Tetrahedron count: + Количество тетраэдров: @@ -5192,20 +5398,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5339,12 +5545,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5352,12 +5558,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5365,12 +5571,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5378,12 +5584,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5391,12 +5597,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5404,12 +5610,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5417,12 +5623,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5430,12 +5636,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5443,12 +5649,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5456,12 +5662,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5469,12 +5675,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5482,12 +5688,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Уравнение электросилы - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5495,12 +5701,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5508,8 +5714,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5517,12 +5723,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5530,12 +5736,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5543,12 +5749,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5556,12 +5762,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5569,12 +5775,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5582,12 +5788,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5595,12 +5801,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5608,12 +5814,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5621,8 +5827,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5630,12 +5836,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5643,12 +5849,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5656,12 +5862,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5669,12 +5875,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5682,12 +5888,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Показать результат - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5695,12 +5901,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5708,12 +5914,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5721,12 +5927,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5734,12 +5940,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5747,12 +5953,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5760,12 +5966,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5773,12 +5979,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5786,12 +5992,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6023,27 +6229,27 @@ Please select a result type first. Constraint current density - Constraint current density + Граничные условия плотности потока Creates a FEM constraint current density - Creates a FEM constraint current density + Создание граничного условия плотности потока для МКЭ FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + Двумерное магнитодинамическое уравнение - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Создает МКЭ уравнение для +двумерных магентодинамических сил @@ -6056,30 +6262,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + Электромагнитные граничные условия... Electromagnetic constraints - Electromagnetic constraints + Электромагнитные граничные условия CmdFEMCompEmEquations - + Fem МКЭ (метод конечных элементов) - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Уравнение электромагнитного поля для решатетеля Элмера + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm index 16e9af7723..6d574b0831 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index f215b21458..c014efa0fc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Mke - + Apply changes to pipeline Uporabi spremembe na cevovodu - + Apply changes to parameters directly and not on recompute only... Uveljavi spremembe določilk neposredno in ne le pri preračunu ... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Mke - + Region clip filter Sito obrezave območja - + Define/create a clip filter which uses functions to define the cliped region Določi/ustvari izrezno sito, ki za določanje izreznega območja uporablja funkcije - + Wrong selection Napačna izbira - + Select a pipeline, please. Izberite cevovod. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Mke - + Function cut filter Function cut filter - + Cut the data along an implicit function Poreži podatke po implicitni (sovsebni) funkciji @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Mke - + Line clip filter Sito porezave črte - + Define/create a clip filter which clips a field along a line Določi/ustvari izrezno sito, ki prereže polje vzdolž črte @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Mke - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Določi/ustvari izrezno sito, ki prereže podatke polja v točki @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Mke - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Ravnina - + Sphere Krogla @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Debelina [mm] - + Stress [MPa] Plot Y-Axis Label Napetost [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Skupaj - + Fem Mke - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Napačna izbira - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Mke - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Napačna vrsta izbiranja - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Mke - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Določi/ustvari izrezno sito, ki prereže polje s skalarno vrednostjo @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Mke - + Warp filter Vtis izobličenja - + Warp the geometry along a vector field by a certain factor Izobliči geometrijo vzdolž polja vektorjev za določen količnik @@ -669,17 +669,17 @@ Ustvari nabor oglišč - + Create filter Ustvari sito - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Možnosti izobličenja @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Kapacitivno telo: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3206,7 +3335,84 @@ Specify another file please. Current density: - Current density: + Trenutna gostota: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Ali ste prepričani da želite nadaljevati? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Odvisnosti predmetov @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Enačba električnih sil - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Prikaži rezultat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6035,27 +6241,27 @@ Please select a result type first. Constraint current density - Constraint current density + Omejilo trenutne gostote Creates a FEM constraint current density - Creates a FEM constraint current density + Ustvari MKE omejitev trenutne gostote FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation - Magnetodynamic2D equation + 2D magnetodinamična enačba - + Creates a FEM equation for 2D magentodynamic forces - Creates a FEM equation for -2D magentodynamic forces + Ustvari MKE enačbo +2D magnetodinamičnih sil @@ -6068,30 +6274,58 @@ Please select a result type first. Electromagnetic constraints... - Electromagnetic constraints... + Elektromagnetna omejila ... Electromagnetic constraints - Electromagnetic constraints + Elektromagnetna omejila CmdFEMCompEmEquations - + Fem Mke - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver - Electromagnetic equations for the Elmer solver + Elektromagnetna enačba reševalnika Elmer + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.qm index ca0be6a669..52adcd2ac2 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts index 66d1214a1b..f64d9d7a46 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Primeni promene na parametre direktno, a ne samo prilikom ponovnog izračunavanja... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Pogrešan izbor - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Ravan - + Sphere Sfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Debljina [mm] - + Stress [MPa] Plot Y-Axis Label Napon [MPa] - + Linearized Stresses Plot title Linearizovani naponi - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Pogrešan izbor - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2443,7 +2443,7 @@ Navedi drugu datoteku. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2470,7 +2470,7 @@ Navedi drugu datoteku. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 na (%2; %3; %4) je: %5 %6 @@ -2494,7 +2494,7 @@ Navedi drugu datoteku. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2502,7 +2502,7 @@ Navedi drugu datoteku. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2984,6 +2984,7 @@ Navedi drugu datoteku. + Constraint Properties Constraint Properties @@ -2998,61 +2999,189 @@ Navedi drugu datoteku. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3206,6 +3335,83 @@ Navedi drugu datoteku. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3328,7 +3534,7 @@ Navedi drugu datoteku. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3340,7 +3546,7 @@ Navedi drugu datoteku. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3476,7 +3682,7 @@ Navedi drugu datoteku. - + Are you sure you want to continue? Da li si siguran da želiš da nastaviš? @@ -3829,7 +4035,7 @@ following referencing objects might be lost: - + Object dependencies Međuzavisnosti objekata @@ -3841,7 +4047,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5202,20 +5408,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Greška: Filter se može primeniti samo na jedan objekat. - - - + + + The filter could not be set up. Nije moguće podesiti filter. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5349,12 +5555,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5362,12 +5568,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5375,12 +5581,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5388,12 +5594,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5401,12 +5607,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Poprečni presek grede - + Creates a FEM beam cross section Napravi MKE poprečni presek grede @@ -5414,12 +5620,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5427,12 +5633,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5440,12 +5646,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5453,12 +5659,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5466,12 +5672,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5479,12 +5685,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5492,12 +5698,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5505,12 +5711,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5518,8 +5724,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5527,12 +5733,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Urednik materijala - + Opens the FreeCAD material editor Otvara FreeCAD urednik materijala @@ -5540,12 +5746,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Tečni materijal - + Creates a FEM material for fluid Zadaj karakteristike tečnog materijala @@ -5553,12 +5759,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nelinearni materijal - + Creates a nonlinear mechanical material Zadaj karakteristike nelinearnog materijala @@ -5566,12 +5772,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Armirani materijal (beton) - + Creates a material for reinforced matrix material such as concrete Zadaj karakteristike osnovnog materijala armiranog materijala @@ -5579,12 +5785,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Čvrsti materijal - + Creates a FEM material for solid Zadaj karakteristike čvrstog materijala @@ -5592,12 +5798,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5605,12 +5811,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5618,12 +5824,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Olakšaj MKE mrežu - + Clear the Mesh of a FEM mesh object Olakšaj mrežu MKE mrežnog objekta @@ -5631,8 +5837,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Prikaži informacije o MKE mreži @@ -5640,12 +5846,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh MKE mreža nekog oblika pomoću Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Napravi MKE mrežu nekog oblika pomoću Gmsh generatora mreže @@ -5653,12 +5859,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5666,12 +5872,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen MKE mreža nekog oblika pomoću Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Napravi MKE mrežu nekog punog tela ili stranice pomoću unutrašnjeg Netgen generatora mreže @@ -5679,12 +5885,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5692,12 +5898,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Prikaži rezultat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5705,12 +5911,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5718,12 +5924,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Standardni CalculiX algoritam za rešavanje - + Creates a standard FEM solver CalculiX with ccx tools Napravi standardni MKЕ algoritam za rešavanje CalculiX sa ccx alatima @@ -5731,12 +5937,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) CalculiX algoritam za rešavanje (nove generacije) - + Creates a FEM solver CalculiX new framework (less result error handling) Napravi MKЕ algoritam za rešavanje CalculiX nove generacije (poboljšana obrada grešaka) @@ -5744,12 +5950,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Kontrola zadataka algoritma za rešavanje - + Changes solver attributes and runs the calculations for the selected solver Menja atribute i pokreće proračune za izabrani algoritam za rešavanje @@ -5757,12 +5963,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Elmer algoritam za rešavanje - + Creates a FEM solver Elmer Napravi MKЕ algoritam za rešavanje Elmer @@ -5770,12 +5976,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Mystran algoritam za rešavanje - + Creates a FEM solver Mystran Napravi MKЕ algoritam za rešavanje Mystran @@ -5783,12 +5989,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Pokreni algoritam za rešavanje - + Runs the calculations for the selected solver Pokreni izabrani algoritam za rešavanje @@ -5796,12 +6002,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Z88 algoritam za rešavanje - + Creates a FEM solver Z88 Napravi MKЕ algoritam za rešavanje Z88 @@ -6044,12 +6250,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6077,19 +6283,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm index d7928d85c5..e920dc0737 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index df7bd6ecf8..2f781e8c7a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Примени промене на параметре директно, а не само приликом поновног израчунавања... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Погрешан избор - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Раван - + Sphere Сфера @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Дебљина [mm] - + Stress [MPa] Plot Y-Axis Label Напон [MPa] - + Linearized Stresses Plot title Линеаризовани напони - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Погрешан избор - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2443,7 +2443,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2470,7 +2470,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 на (%2; %3; %4) је: %5 %6 @@ -2494,7 +2494,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2502,7 +2502,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2984,6 +2984,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -2998,61 +2999,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3206,6 +3335,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3328,7 +3534,7 @@ Specify another file please. - + A dialog is already open in the task panel Дијалог је већ отворен у панелу задатака @@ -3340,7 +3546,7 @@ Specify another file please. - + Do you want to close this dialog? Да ли желите да затворите овај дијалог? @@ -3476,7 +3682,7 @@ Specify another file please. - + Are you sure you want to continue? Да ли си сигуран да желиш да наставиш? @@ -3829,7 +4035,7 @@ following referencing objects might be lost: - + Object dependencies Међузависности објеката @@ -3841,7 +4047,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5202,20 +5408,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Грешка: Филтер се може применити само на један објекат. - - - + + + The filter could not be set up. Није могуће подесити филтер. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5349,12 +5555,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5362,12 +5568,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5375,12 +5581,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5388,12 +5594,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5401,12 +5607,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Попречни пресек греде - + Creates a FEM beam cross section Направи МКЕ попречни пресек греде @@ -5414,12 +5620,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5427,12 +5633,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5440,12 +5646,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5453,12 +5659,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5466,12 +5672,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5479,12 +5685,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5492,12 +5698,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5505,12 +5711,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5518,8 +5724,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5527,12 +5733,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Уредник материјала - + Opens the FreeCAD material editor Отвара FreeCAD уредник материјала @@ -5540,12 +5746,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Течни материјал - + Creates a FEM material for fluid Задај карактеристике течног материјала @@ -5553,12 +5759,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Нелинеарни материјал - + Creates a nonlinear mechanical material Задај карактеристике нелинеарног материјала @@ -5566,12 +5772,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Армирани материјал (бетон) - + Creates a material for reinforced matrix material such as concrete Задај карактеристике основног материјала армираног материјала @@ -5579,12 +5785,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Чврсти материјал - + Creates a FEM material for solid Задај карактеристике чврстог материјала @@ -5592,12 +5798,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5605,12 +5811,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5618,12 +5824,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Олакшај МКЕ мрежу - + Clear the Mesh of a FEM mesh object Олакшај мрежу МКЕ мрежног објекта @@ -5631,8 +5837,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Прикажи информације о МКЕ мрежи @@ -5640,12 +5846,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh МКЕ мрежа неког облика помоћу Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Направи МКЕ мрежу неког облика помоћу Gmsh генератора мреже @@ -5653,12 +5859,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5666,12 +5872,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen МКЕ мрежа неког облика помоћу Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Направи МКЕ мрежу неког пуног тела или странице помоћу унутрашњег Netgen генератора мреже @@ -5679,12 +5885,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5692,12 +5898,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Прикажи резултат - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5705,12 +5911,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5718,12 +5924,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Стандардни CalculiX алгоритам за решавање - + Creates a standard FEM solver CalculiX with ccx tools Направи стандардни МКЕ алгоритам за решавање CalculiX са ccx алатима @@ -5731,12 +5937,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) CalculiX алгоритам за решавање (нове генерације) - + Creates a FEM solver CalculiX new framework (less result error handling) Направи МКЕ алгоритам за решавање CalculiX нове генерације (побољшана обрада грешака) @@ -5744,12 +5950,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Контрола задатака алгоритма за решавање - + Changes solver attributes and runs the calculations for the selected solver Мења атрибуте и покреће прорачуне за изабрани алгоритам за решавање @@ -5757,12 +5963,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Elmer алгоритам за решавање - + Creates a FEM solver Elmer Направи МКЕ алгоритам за решавање Elmer @@ -5770,12 +5976,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Mystran алгоритам за решавање - + Creates a FEM solver Mystran Направи МКЕ алгоритам за решавање Mystran @@ -5783,12 +5989,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Покрени алгоритам за решавање - + Runs the calculations for the selected solver Покрени изабрани алгоритам за решавање @@ -5796,12 +6002,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Z88 алгоритам за решавање - + Creates a FEM solver Z88 Направи МКЕ алгоритам за решавање Z88 @@ -6044,12 +6250,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6077,19 +6283,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm index 4681d8227c..8cd1d1f751 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index a767f58842..47c3affb11 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Fel val - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plan - + Sphere Sfär @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Totalt - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Fel val - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Skapa filter - + Create function Skapa funktion - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp-alternativ @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified ospecificerad + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + Y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Vill du stänga denna dialogruta? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Är du säker på att du vill fortsätta? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Objektberoenden @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Visa resultat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm index 717a69b39e..f9f2223450 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 206664c9dc..4a7c59da33 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Sonlu elemanlar yöntemi - + Apply changes to pipeline İş hattına değişiklikleri uygula - + Apply changes to parameters directly and not on recompute only... Değişiklikleri yalnızca yeniden hesaplamada değil, doğrudan parametrelere uygulayın... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Sonlu elemanlar yöntemi - + Region clip filter Bölge alıntısı süzgeci - + Define/create a clip filter which uses functions to define the cliped region Alıntılanmış bölgeyi tanımlamak için işlevler kullanan bir alıntı süzgeci tanımlayın/oluşturun - + Wrong selection Yanlış seçim - + Select a pipeline, please. Bir iş hattı seçiniz, lütfen. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Sonlu elemanlar yöntemi - + Function cut filter Kesme filtresi fonksiyonu - + Cut the data along an implicit function Verileri örtük bir fonksiyon boyunca kesin @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Sonlu elemanlar yöntemi - + Line clip filter Çizgi alıntı süzgeci - + Define/create a clip filter which clips a field along a line Bir çizgi boyunca bir alanı alıntılayan alıntı süzgeci tanımlayın/oluşturun @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Sonlu elemanlar yöntemi - + Data at point clip filter Noktasal veri alıntısı süzgeci - + Define/create a clip filter which clips a field data at point Noktasal veri alanını alıntılayan bir alıntı süzgeci tanımlayın/oluşturun @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Sonlu elemanlar yöntemi - + Filter functions Süzgeç işlevleri - + Functions for use in postprocessing filter... İşlem sonrası filtrede kullanılacak fonksiyonlar... - + Plane Düzlem - + Sphere Küre @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Kalınlık [mm] - + Stress [MPa] Plot Y-Axis Label Gerilim [MPa] - + Linearized Stresses Plot title Doğrusallaştırılmış Gerilmeler - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Toplam - + Fem Sonlu elemanlar yöntemi - + Stress linearization plot Gerilme doğrusallaştırma grafiği - + Define/create stress linearization plots Gerilme doğrusallaştırma grafiklerini tanımlayın/oluşturun - - + + Wrong selection Yanlış seçim - - + + Select a Clip filter which clips a STRESS field along a line, please. Bir çizgi boyunca bir STRES alanını kırpan bir Darbe filtresi seçin, lütfen. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Sonlu elemanlar yöntemi - + Post pipeline from result Sonuçtaki iş hattını yayınla - + Creates a post processing pipeline from a result object Bir sonuç nesnesinden bir işlem sonrası oluşturur - + Wrong selection type Yanlış seçim türü - + Select a result object, please. Bir sonuç nesnesi seçin, lütfen. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Sonlu elemanlar yöntemi - + Scalar clip filter Skaler kırpma filtresi - + Define/create a clip filter which clips a field with a scalar value Skaler değere sahip bir alanı kırpan bir kırpma filtresi tanımlayın/oluşturun @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Sonlu elemanlar yöntemi - + Warp filter Saptırma filtresi - + Warp the geometry along a vector field by a certain factor Geometriyi bir vektör alanı boyunca belirli bir etkenle saptırın @@ -669,17 +669,17 @@ Düğüm noktaları kümesi oluştur - + Create filter Filtre edici oluşturun - + Create function Fonksiyon oluştur - + Create pipeline from result Sonuçtan iş hattı oluştur @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Başlangıç noktası ve dik yönüne göre tanımlanan bir düzlem işlevi oluştur - + Create a sphere function, defined by its center and radius Merkezi ve yarıçapına göre tanımlanan bir küre işlevi oluştur @@ -2436,7 +2436,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Kesilecek, örtük fonksiyonu seçiniz @@ -2463,7 +2463,7 @@ Specify another file please. Noktasal veri seçenekleri - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2487,7 +2487,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Skaler kırpma seçenekleri @@ -2495,7 +2495,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Saptırma seçenekleri @@ -2977,6 +2977,7 @@ Specify another file please. + Constraint Properties Kısıtlama Özellikleri @@ -2991,61 +2992,189 @@ Specify another file please. Potential: Potansiyel: - - - Electric potential in V - V biriminde elektrik potansiyeli - - + + + + + + + + + + + + + + + + + + + + unspecified belirtilmemiş + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Skaler + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potansiyel Sabiti - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Uzak alan / Elektrik sonsuz - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Elektrik Gücünü Hesapla - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Kapasite Gövdesi: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3199,6 +3328,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3321,7 +3527,7 @@ Specify another file please. - + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık @@ -3333,7 +3539,7 @@ Specify another file please. - + Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? @@ -3469,7 +3675,7 @@ Specify another file please. - + Are you sure you want to continue? Devam etmek istediğinizden emin misiniz? @@ -3822,7 +4028,7 @@ following referencing objects might be lost: - + Object dependencies Nesne bağımlılıkları @@ -3834,7 +4040,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5195,20 +5401,20 @@ yön olarak kullanılır setupFilter - + Error: A filter can only be applied to a single object. Hata: Bir filtre sadece tekil bir objeye uygulanabilir. - - - + + + The filter could not be set up. Filtre kurulamadı. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5342,12 +5548,12 @@ yön olarak kullanılır FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5355,12 +5561,12 @@ yön olarak kullanılır FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5368,12 +5574,12 @@ yön olarak kullanılır FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5381,12 +5587,12 @@ yön olarak kullanılır FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5394,12 +5600,12 @@ yön olarak kullanılır FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5407,12 +5613,12 @@ yön olarak kullanılır FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5420,12 +5626,12 @@ yön olarak kullanılır FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5433,12 +5639,12 @@ yön olarak kullanılır FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5446,12 +5652,12 @@ yön olarak kullanılır FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5459,12 +5665,12 @@ yön olarak kullanılır FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5472,12 +5678,12 @@ yön olarak kullanılır FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5485,12 +5691,12 @@ yön olarak kullanılır FEM_EquationElectricforce - + Electricforce equation Elektriksel kuvvet denklemi - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5498,12 +5704,12 @@ yön olarak kullanılır FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5511,8 +5717,8 @@ yön olarak kullanılır FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5520,12 +5726,12 @@ yön olarak kullanılır FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5533,12 +5739,12 @@ yön olarak kullanılır FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5546,12 +5752,12 @@ yön olarak kullanılır FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5559,12 +5765,12 @@ yön olarak kullanılır FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5572,12 +5778,12 @@ yön olarak kullanılır FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5585,12 +5791,12 @@ yön olarak kullanılır FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5598,12 +5804,12 @@ yön olarak kullanılır FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5611,12 +5817,12 @@ yön olarak kullanılır FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5624,8 +5830,8 @@ yön olarak kullanılır FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5633,12 +5839,12 @@ yön olarak kullanılır FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5646,12 +5852,12 @@ yön olarak kullanılır FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5659,12 +5865,12 @@ yön olarak kullanılır FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5672,12 +5878,12 @@ yön olarak kullanılır FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5685,12 +5891,12 @@ yön olarak kullanılır FEM_ResultShow - + Show result Sonuçları göster - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5698,12 +5904,12 @@ yön olarak kullanılır FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5711,12 +5917,12 @@ yön olarak kullanılır FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5724,12 +5930,12 @@ yön olarak kullanılır FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5737,12 +5943,12 @@ yön olarak kullanılır FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5750,12 +5956,12 @@ yön olarak kullanılır FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5763,12 +5969,12 @@ yön olarak kullanılır FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5776,12 +5982,12 @@ yön olarak kullanılır FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5789,12 +5995,12 @@ yön olarak kullanılır FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6037,12 +6243,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6070,19 +6276,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Sonlu elemanlar yöntemi - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm index 1514b75f68..dda278ed90 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index b3e6c6b3f9..6924e389d7 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem МСЕ (Метод скінченних елементів) - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem МСЕ (Метод скінченних елементів) - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Невірний вибір - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem МСЕ (Метод скінченних елементів) - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem МСЕ (Метод скінченних елементів) - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem МСЕ (Метод скінченних елементів) - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem МСЕ (Метод скінченних елементів) - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Площини - + Sphere Сфера @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Товщина [mm] - + Stress [MPa] Plot Y-Axis Label Напруження [MPa] - + Linearized Stresses Plot title Лінійні напруження - + Membrane Plot legend item label Оболонка - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Всього - + Fem МСЕ (Метод скінченних елементів) - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Невірний вибір - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem МСЕ (Метод скінченних елементів) - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Будь ласка, оберіть підсумковий об'єкт. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem МСЕ (Метод скінченних елементів) - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem МСЕ (Метод скінченних елементів) - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Створити набір вузлів - + Create filter Створити фільтр - + Create function Створити функцію - + Create pipeline from result Create pipeline from result @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Створити функцію площини, яка визначається її початком координат та нормаллю - + Create a sphere function, defined by its center and radius Створити функцію сфери, яка визначається її центром та радіусом @@ -2446,7 +2446,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2473,7 +2473,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2497,7 +2497,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2505,7 +2505,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2987,6 +2987,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3001,61 +3002,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Електричний потенціал в V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Чи визначає обмеження постійний потенціал - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Чи визначає обмеження потенціал далекого поля - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Чи є обмеження для електричної сили - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3209,6 +3338,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3331,7 +3537,7 @@ Specify another file please. - + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач @@ -3343,7 +3549,7 @@ Specify another file please. - + Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? @@ -3479,7 +3685,7 @@ Specify another file please. - + Are you sure you want to continue? Ви впевнені, що бажаєте продовжити? @@ -3832,7 +4038,7 @@ following referencing objects might be lost: - + Object dependencies Залежності обʼєктів @@ -3844,7 +4050,7 @@ following referencing objects might be lost: такі об'єкти за посиланням можуть бути втрачені: - + The pipeline is not empty, therefore the following referencing objects might be lost: Трубопровід не порожній, отже @@ -5205,20 +5411,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Помилка: фільтр можна застосувати лише до одного об'єкта. - - - + + + The filter could not be set up. Не вдалося встановити фільтр. - - + + Error: no post processing object selected. Помилка: об'єкт для обробки не обраний. @@ -5352,12 +5558,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5365,12 +5571,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5378,12 +5584,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5391,12 +5597,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5404,12 +5610,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5417,12 +5623,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5430,12 +5636,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5443,12 +5649,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5456,12 +5662,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5469,12 +5675,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5482,12 +5688,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5495,12 +5701,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Рівняння електричної сили - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5508,12 +5714,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5521,8 +5727,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5530,12 +5736,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5543,12 +5749,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5556,12 +5762,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5569,12 +5775,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5582,12 +5788,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5595,12 +5801,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5608,12 +5814,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5621,12 +5827,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5634,8 +5840,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5643,12 +5849,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5656,12 +5862,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5669,12 +5875,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5682,12 +5888,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5695,12 +5901,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Показати результат - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5708,12 +5914,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5721,12 +5927,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5734,12 +5940,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5747,12 +5953,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5760,12 +5966,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5773,12 +5979,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5786,12 +5992,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5799,12 +6005,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6047,12 +6253,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6080,19 +6286,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem МСЕ (Метод скінченних елементів) - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm index 164c66a027..ae18e62681 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 50020e4517..b84e572e89 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selecció incorrecta - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Pla - + Sphere Esfera @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Selecció incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies Dependències de l'objecte @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Mostra el resultat - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm index 8b731c58bb..65306ce6b3 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index 419fcc7a8e..da92f46efc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Lựa chọn sai - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Mặt phẳng - + Sphere Hình cầu @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Tổng - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Lựa chọn sai - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Tạo nút - + Create filter Tạo bộ lọc - + Create function Tạo hàm - + Create pipeline from result Tạo ống dẫn từ kết quả @@ -765,12 +765,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Tạo một hàm mặt phẳng, xác định bởi gốc và pháp tuyến - + Create a sphere function, defined by its center and radius Tạo hàm cầu, xác định bởi tâm và bán kính @@ -2440,7 +2440,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2467,7 +2467,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2491,7 +2491,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2499,7 +2499,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2981,6 +2981,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -2995,61 +2996,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3203,6 +3332,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3325,7 +3531,7 @@ Specify another file please. - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -3337,7 +3543,7 @@ Specify another file please. - + Do you want to close this dialog? Do you want to close this dialog? @@ -3473,7 +3679,7 @@ Specify another file please. - + Are you sure you want to continue? Are you sure you want to continue? @@ -3826,7 +4032,7 @@ following referencing objects might be lost: - + Object dependencies Phụ thuộc đối tượng @@ -3838,7 +4044,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5199,20 +5405,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5346,12 +5552,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5359,12 +5565,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5372,12 +5578,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5385,12 +5591,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5398,12 +5604,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5411,12 +5617,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5424,12 +5630,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5437,12 +5643,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5450,12 +5656,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5463,12 +5669,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5476,12 +5682,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5489,12 +5695,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Phương trình điện lực - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5502,12 +5708,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5515,8 +5721,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5524,12 +5730,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5537,12 +5743,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5550,12 +5756,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5563,12 +5769,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5576,12 +5782,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5589,12 +5795,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5602,12 +5808,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5615,12 +5821,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5628,8 +5834,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5637,12 +5843,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5650,12 +5856,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5663,12 +5869,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5676,12 +5882,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5689,12 +5895,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result Hiển thị kết quả - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5702,12 +5908,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5715,12 +5921,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5728,12 +5934,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5741,12 +5947,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5754,12 +5960,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5767,12 +5973,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5780,12 +5986,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5793,12 +5999,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6041,12 +6247,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6074,19 +6280,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem Fem - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm index 0cec688791..22ac26b8f2 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index b30d2b1053..b2c0987877 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem 有限元 - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem 有限元 - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection 选择错误 - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem 有限元 - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem 有限元 - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem 有限元 - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem 有限元 - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane 平面 - + Sphere 球体 @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label 厚度 [mm] - + Stress [MPa] Plot Y-Axis Label 压强 [MPa] - + Linearized Stresses Plot title 线性压强 - + Membrane Plot legend item label 薄膜 - + Membrane and Bending Plot legend item label 薄膜和弯曲 - + Total Plot legend item label 总计 - + Fem 有限元 - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection 选择错误 - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem 有限元 - + Post pipeline from result 从结果创建后处理管线 - + Creates a post processing pipeline from a result object 从结果对象创建后处理管线 - + Wrong selection type Wrong selection type - + Select a result object, please. 请选择一个结果对象。 @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem 有限元 - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem 有限元 - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ 创建节点集 - + Create filter 创建筛选器 - + Create function 创建函数 - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal 创建一个平面函数，由其原点和法线定义 - + Create a sphere function, defined by its center and radius 创建一个球形函数，由其球心和半径定义 @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties 约束属性 @@ -3000,61 +3001,189 @@ Specify another file please. Potential: 电位： - - - Electric potential in V - 电位（伏特） - - + + + + + + + + + + + + + + + + + + + + unspecified 未指定 + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + 标量 + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel 一个对话框已在任务面板打开 @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? 您要关闭此对话框吗? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? 您确定要继续吗？ @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies 对象依赖关系 @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. 错误：未选取后处理对象。 @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result 显示结果 - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem 有限元 - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm index 6446ba68c6..5fe47c2790 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 194090935f..90d411baa2 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem 有限元素法 - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem 有限元素法 - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection 錯誤的選取 - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem 有限元素法 - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem 有限元素法 - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem 有限元素法 - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,27 +421,27 @@ CmdFemPostFunctions - + Fem 有限元素法 - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane 平面 - + Sphere 球體 @@ -449,65 +449,65 @@ CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem 有限元素法 - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection 錯誤的選取 - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +515,27 @@ CmdFemPostPipelineFromResult - + Fem 有限元素法 - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +543,17 @@ CmdFemPostScalarClipFilter - + Fem 有限元素法 - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +561,17 @@ CmdFemPostWarpVectorFilter - + Fem 有限元素法 - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -669,17 +669,17 @@ Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -766,12 +766,12 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -2445,7 +2445,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2472,7 +2472,7 @@ Specify another file please. Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 在 (%2; %3; %4) 是： %5 %6 @@ -2496,7 +2496,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2504,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2986,6 +2986,7 @@ Specify another file please. + Constraint Properties Constraint Properties @@ -3000,61 +3001,189 @@ Specify another file please. Potential: Potential: - - - Electric potential in V - Electric potential in V - - + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3208,6 +3337,83 @@ Specify another file please. Current density: Current density: + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + GmshMesh @@ -3330,7 +3536,7 @@ Specify another file please. - + A dialog is already open in the task panel 於工作面板已開啟對話窗 @@ -3342,7 +3548,7 @@ Specify another file please. - + Do you want to close this dialog? 您確定要關閉此對話窗嗎? @@ -3478,7 +3684,7 @@ Specify another file please. - + Are you sure you want to continue? 您確定要繼續嗎? @@ -3831,7 +4037,7 @@ following referencing objects might be lost: - + Object dependencies 物件相依 @@ -3843,7 +4049,7 @@ following referencing objects might be lost: following referencing objects might be lost: - + The pipeline is not empty, therefore the following referencing objects might be lost: The pipeline is not empty, therefore the @@ -5204,20 +5410,20 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. @@ -5351,12 +5557,12 @@ normal vector of the face is used as direction FEM_ConstraintSectionPrint - + Constraint sectionprint Constraint sectionprint - + Creates a FEM constraint sectionprint Creates a FEM constraint sectionprint @@ -5364,12 +5570,12 @@ normal vector of the face is used as direction FEM_ConstraintSelfWeight - + Constraint self weight Constraint self weight - + Creates a FEM constraint self weight Creates a FEM constraint self weight @@ -5377,12 +5583,12 @@ normal vector of the face is used as direction FEM_ConstraintTie - + Constraint tie Constraint tie - + Creates a FEM constraint tie Creates a FEM constraint tie @@ -5390,12 +5596,12 @@ normal vector of the face is used as direction FEM_ElementFluid1D - + Fluid section for 1D flow Fluid section for 1D flow - + Creates a FEM fluid section for 1D flow Creates a FEM fluid section for 1D flow @@ -5403,12 +5609,12 @@ normal vector of the face is used as direction FEM_ElementGeometry1D - + Beam cross section Beam cross section - + Creates a FEM beam cross section Creates a FEM beam cross section @@ -5416,12 +5622,12 @@ normal vector of the face is used as direction FEM_ElementGeometry2D - + Shell plate thickness Shell plate thickness - + Creates a FEM shell plate thickness Creates a FEM shell plate thickness @@ -5429,12 +5635,12 @@ normal vector of the face is used as direction FEM_ElementRotation1D - + Beam rotation Beam rotation - + Creates a FEM beam rotation Creates a FEM beam rotation @@ -5442,12 +5648,12 @@ normal vector of the face is used as direction FEM_EquationElectrostatic - + Electrostatic equation Electrostatic equation - + Creates a FEM equation for electrostatic Creates a FEM equation for electrostatic @@ -5455,12 +5661,12 @@ normal vector of the face is used as direction FEM_EquationElasticity - + Elasticity equation Elasticity equation - + Creates a FEM equation for elasticity Creates a FEM equation for elasticity @@ -5468,12 +5674,12 @@ normal vector of the face is used as direction FEM_EquationFlow - + Flow equation Flow equation - + Creates a FEM equation for flow Creates a FEM equation for flow @@ -5481,12 +5687,12 @@ normal vector of the face is used as direction FEM_EquationFlux - + Flux equation Flux equation - + Creates a FEM equation for flux Creates a FEM equation for flux @@ -5494,12 +5700,12 @@ normal vector of the face is used as direction FEM_EquationElectricforce - + Electricforce equation Electricforce equation - + Creates a FEM equation for electric forces Creates a FEM equation for electric forces @@ -5507,12 +5713,12 @@ normal vector of the face is used as direction FEM_EquationHeat - + Heat equation Heat equation - + Creates a FEM equation for heat Creates a FEM equation for heat @@ -5520,8 +5726,8 @@ normal vector of the face is used as direction FEM_Examples - - + + Open FEM examples Open FEM examples @@ -5529,12 +5735,12 @@ normal vector of the face is used as direction FEM_MaterialEditor - + Material editor Material editor - + Opens the FreeCAD material editor Opens the FreeCAD material editor @@ -5542,12 +5748,12 @@ normal vector of the face is used as direction FEM_MaterialFluid - + Material for fluid Material for fluid - + Creates a FEM material for fluid Creates a FEM material for fluid @@ -5555,12 +5761,12 @@ normal vector of the face is used as direction FEM_MaterialMechanicalNonlinear - + Nonlinear mechanical material Nonlinear mechanical material - + Creates a nonlinear mechanical material Creates a nonlinear mechanical material @@ -5568,12 +5774,12 @@ normal vector of the face is used as direction FEM_MaterialReinforced - + Reinforced material (concrete) Reinforced material (concrete) - + Creates a material for reinforced matrix material such as concrete Creates a material for reinforced matrix material such as concrete @@ -5581,12 +5787,12 @@ normal vector of the face is used as direction FEM_MaterialSolid - + Material for solid Material for solid - + Creates a FEM material for solid Creates a FEM material for solid @@ -5594,12 +5800,12 @@ normal vector of the face is used as direction FEM_FEMMesh2Mesh - + FEM mesh to mesh FEM mesh to mesh - + Convert the surface of a FEM mesh to a mesh Convert the surface of a FEM mesh to a mesh @@ -5607,12 +5813,12 @@ normal vector of the face is used as direction FEM_MeshBoundaryLayer - + FEM mesh boundary layer FEM mesh boundary layer - + Creates a FEM mesh boundary layer Creates a FEM mesh boundary layer @@ -5620,12 +5826,12 @@ normal vector of the face is used as direction FEM_MeshClear - + Clear FEM mesh Clear FEM mesh - + Clear the Mesh of a FEM mesh object Clear the Mesh of a FEM mesh object @@ -5633,8 +5839,8 @@ normal vector of the face is used as direction FEM_MeshDisplayInfo - - + + Display FEM mesh info Display FEM mesh info @@ -5642,12 +5848,12 @@ normal vector of the face is used as direction FEM_MeshGmshFromShape - + FEM mesh from shape by Gmsh FEM mesh from shape by Gmsh - + Create a FEM mesh from a shape by Gmsh mesher Create a FEM mesh from a shape by Gmsh mesher @@ -5655,12 +5861,12 @@ normal vector of the face is used as direction FEM_MeshGroup - + FEM mesh group FEM mesh group - + Creates a FEM mesh group Creates a FEM mesh group @@ -5668,12 +5874,12 @@ normal vector of the face is used as direction FEM_MeshNetgenFromShape - + FEM mesh from shape by Netgen FEM mesh from shape by Netgen - + Create a FEM mesh from a solid or face shape by Netgen internal mesher Create a FEM mesh from a solid or face shape by Netgen internal mesher @@ -5681,12 +5887,12 @@ normal vector of the face is used as direction FEM_MeshRegion - + FEM mesh region FEM mesh region - + Creates a FEM mesh region Creates a FEM mesh region @@ -5694,12 +5900,12 @@ normal vector of the face is used as direction FEM_ResultShow - + Show result 顯示結果 - + Shows and visualizes selected result data Shows and visualizes selected result data @@ -5707,12 +5913,12 @@ normal vector of the face is used as direction FEM_ResultsPurge - + Purge results Purge results - + Purges all results from active analysis Purges all results from active analysis @@ -5720,12 +5926,12 @@ normal vector of the face is used as direction FEM_SolverCalculixCxxtools - + Solver CalculiX Standard Solver CalculiX Standard - + Creates a standard FEM solver CalculiX with ccx tools Creates a standard FEM solver CalculiX with ccx tools @@ -5733,12 +5939,12 @@ normal vector of the face is used as direction FEM_SolverCalculix - + Solver CalculiX (new framework) Solver CalculiX (new framework) - + Creates a FEM solver CalculiX new framework (less result error handling) Creates a FEM solver CalculiX new framework (less result error handling) @@ -5746,12 +5952,12 @@ normal vector of the face is used as direction FEM_SolverControl - + Solver job control Solver job control - + Changes solver attributes and runs the calculations for the selected solver Changes solver attributes and runs the calculations for the selected solver @@ -5759,12 +5965,12 @@ normal vector of the face is used as direction FEM_SolverElmer - + Solver Elmer Solver Elmer - + Creates a FEM solver Elmer Creates a FEM solver Elmer @@ -5772,12 +5978,12 @@ normal vector of the face is used as direction FEM_SolverMystran - + Solver Mystran Solver Mystran - + Creates a FEM solver Mystran Creates a FEM solver Mystran @@ -5785,12 +5991,12 @@ normal vector of the face is used as direction FEM_SolverRun - + Run solver calculations Run solver calculations - + Runs the calculations for the selected solver Runs the calculations for the selected solver @@ -5798,12 +6004,12 @@ normal vector of the face is used as direction FEM_SolverZ88 - + Solver Z88 Solver Z88 - + Creates a FEM solver Z88 Creates a FEM solver Z88 @@ -6046,12 +6252,12 @@ Please select a result type first. FEM_EquationMagnetodynamic2D - + Magnetodynamic2D equation Magnetodynamic2D equation - + Creates a FEM equation for 2D magentodynamic forces Creates a FEM equation for @@ -6079,19 +6285,47 @@ Please select a result type first. CmdFEMCompEmEquations - + Fem 有限元素法 - - Electromagnetic equations... - Electromagnetic equations... + + Electromagnetic Equations + Electromagnetic Equations - + Electromagnetic equations for the Elmer solver Electromagnetic equations for the Elmer solver + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magentodynamic forces + Creates a FEM equation for + magentodynamic forces + + diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ca.qm b/src/Mod/Image/Gui/Resources/translations/Image_ca.qm index ed8728db16..c97f822739 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ca.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ca.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ca.ts b/src/Mod/Image/Gui/Resources/translations/Image_ca.ts index 9a3b4ad363..ac95509f59 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_ca.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_ca.ts @@ -11,7 +11,7 @@ Create image plane... - Crear el pla d'imatge... + Crea el pla d'imatge... diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm index d93ad38b71..adf0c8c2e3 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.ts b/src/Mod/Image/Gui/Resources/translations/Image_hu.ts index e1bdaed9a6..82641e1a43 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_hu.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_hu.ts @@ -219,12 +219,12 @@ Scale image plane - Scale image plane + Kép sík méretezés Scales an image plane by defining a distance between two points - Scales an image plane by defining a distance between two points + Képsíkot méretez két pont közti távolság megadásával @@ -232,7 +232,7 @@ Scale image plane - Scale image plane + Kép sík méretezés @@ -242,12 +242,12 @@ Select first point - Select first point + Válassza ki az első pontot Enter distance - Enter distance + Távolság megadása @@ -257,12 +257,12 @@ Select second point - Select second point + Második pont kiválasztása Select Image Plane and type distance - Select Image Plane and type distance + Képsík kiválasztása és távolság beírása diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm index 3f0f936e88..674af2b7f6 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.ts b/src/Mod/Image/Gui/Resources/translations/Image_ru.ts index db014cf250..f2096e91e2 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_ru.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_ru.ts @@ -73,7 +73,7 @@ Undefined type of colour space for image viewing - Неопределённый тип цветового пространства для просмотра изображений + Неопределенный тип цветового пространства для просмотра изображений @@ -252,7 +252,7 @@ Select image plane - Select image plane + Выберите плоскость изображения diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.qm index 3ca199bf1f..03e92e59d0 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts index 4db0bea38c..8a474fcbc6 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts @@ -30,13 +30,13 @@ Boundings info... - Інфармацыя аб межах... + Інфармацыя аб габарытах... Shows the boundings of the selected mesh - Адлюстроўвае межы абранай паліганальнай сетцы + Адлюстроўвае габарыты абранай паліганальнай сеткі @@ -177,7 +177,7 @@ Opens a dialog to analyze and repair a mesh - Адчыняе дыялогавае акно для аналізу і аднаўлення паліганальнай сеткі + Адчыняе дыялогавае акно для даследавання і аднаўлення паліганальнай сеткі @@ -561,13 +561,13 @@ Create mesh segments... - Стварыць сегменты паліганальнай сеткі... + Стварыць адрэзкі паліганальнай сеткі... Create mesh segments - Стварыць сегменты паліганальнай сеткі + Стварыць адрэзкі паліганальнай сеткі @@ -580,13 +580,13 @@ Create mesh segments from best-fit surfaces... - Стварыць сегменты паліганальнай сеткі з найлепшай адпаведнасці паверхні... + Стварае адрэзкі паліганальнай сеткі з найлепшай адпаведнасцю паверхні... Create mesh segments from best-fit surfaces - Стварае сегменты паліганальнай сеткі з найлепшай адпаведнасці паверхні + Стварае адрэзкі паліганальнай сеткі з найлепшай адпаведнасцю паверхні @@ -911,7 +911,7 @@ None - None + Нічога @@ -998,7 +998,7 @@ Analyze - Analyze + Даследаваць @@ -1139,12 +1139,12 @@ Please run the command to repair folds first Invalid face indices - Недапушчальныя індэксы грані + Хібныя індэксы грані Invalid point indices - Недапушчальныя індэксы кропкі + Хібныя індэксы кропкі @@ -1154,12 +1154,12 @@ Please run the command to repair folds first Invalid neighbour indices - Недапушчальныя суседнія індэксы + Хібныя суседнія індэксы No invalid indices - Без недапушчальных індэксаў + Без хібных індэксаў @@ -1352,7 +1352,7 @@ Please run the command to repair folds first Closed - Зачынены + Замкнуты @@ -1519,7 +1519,7 @@ If not checked, it depends on the option "Enable backlight color" will be used or black. Ніжні бок паверхні будзе адлюстроўвацца так жа, як і верхні бок. Калі не птушка, гэта залежыць ад налады "Уключыць колер асвятлення". -(падзел пераваг Праецыраванне - > Трохмерны выгляд). +(падзел пераваг Праецыраванне - > Трохмернае прадстаўленне). Будзе ўжывацца альбо колер асвятлення, альбо чорны. @@ -1530,12 +1530,12 @@ will be used or black. A bounding box will be displayed - Будзе адлюстраваны абмежаваны прастакутнік + Габарыты будуць адлюстраваныя Show bounding-box for highlighted or selected meshes - Адлюстраваць абмежаваны прастакутнік для вылучаных ці абраных паліганальных сетак + Адлюстраваць габарыты для вылучаных ці абраных паліганальных сетак @@ -2022,7 +2022,7 @@ to a smoother appearance. Base - База + Асноўныя @@ -2144,7 +2144,7 @@ to a smoother appearance. Boundings of %1: - Межы %1: + Прывязкі %1: @@ -2262,163 +2262,163 @@ Please visit http://www.openscad.org/index.html to install it. Inventor V2.1 ascii - Inventor V2.1 ascii + Inventor V2.1 у ASCII X3D Extensible 3D - X3D Extensible 3D + X3D Extensible 3D (*. x3d) Compressed X3D - Compressed X3D + Сціснуты X3D WebGL/X3D - WebGL/X3D + WebGL/X3D VRML V2.0 - VRML V2.0 + VRML V2.0 Compressed VRML 2.0 - Compressed VRML 2.0 + Сціснуты VRML 2.0 Nastran - Nastran + Nastran Python module def - Python module def + Вызначэнне модуля Python Asymptote Format - Asymptote Format + Фармат асімптоты 3D Manufacturing Format - 3D Manufacturing Format + Фармат 3D-вытворчасці Export mesh - Export mesh + Экспартаваць паліганальную сетку Meshing Tolerance - Meshing Tolerance + Дакладнасць паліганальнай сеткі Enter tolerance for meshing geometry: - Enter tolerance for meshing geometry: + Увядзіце дакладнасць для геаметрыі паліганальнай сеткі: The mesh '%1' is not a solid. - The mesh '%1' is not a solid. + Паліганальная сетка '%1' не з'яўляецца суцэльным целам. The mesh '%1' is a solid. - The mesh '%1' is a solid. + Паліганальная сетка '%1' з'яўляецца суцэльным целам. Solid Mesh - Solid Mesh + Паліганальная сетка суцэльнага цела Boundings - Boundings + Прывязкі Fill holes - Fill holes + Запоўніць адтуліны Fill holes with maximum number of edges: - Fill holes with maximum number of edges: + Запаўняе адтуліны з найбольшай колькасцю рэбраў: Scaling - Scaling + Маштабаванне Enter scaling factor: - Enter scaling factor: + Увядзіце каэфіцыент маштабавання: [Points: %1, Edges: %2, Faces: %3] - [Points: %1, Edges: %2, Faces: %3] + [Кропак: %1, рэбраў: %2, граняў: %3] Display components - Display components + Адлюстраваць кампаненты Display segments - Display segments + Адлюстраваць адрэзкі Display colors - Display colors + Адлюстраваць колеры Leave info mode - Leave info mode + Выйсці з інфармацыйнага рэжыму Index: %1 - Index: %1 + Індэкс: %1 Leave hole-filling mode - Leave hole-filling mode + Выйсці з рэжыму запаўнення адтулін Leave removal mode - Leave removal mode + Выйсці з рэжыму выдалення Delete selected faces - Delete selected faces + Выдаліць абраныя грані Clear selected faces - Clear selected faces + Зныць выбар з абраных граняў Annotation - Annotation + Заметка @@ -2426,17 +2426,17 @@ Please visit http://www.openscad.org/index.html to install it. Analyze - Analyze + Даследаваць Boolean - Лагічнае значэнне + Лагічная аперацыя &Meshes - &Meshes + &Паліганальных сетак @@ -2446,22 +2446,22 @@ Please visit http://www.openscad.org/index.html to install it. Mesh tools - Mesh tools + Інструменты паліганальнай сеткі Mesh modify - Mesh modify + Змена паліганальнай сеткі Mesh boolean - Mesh boolean + Лагічная аперацыя з паліганальнай сеткай Mesh cutting - Mesh cutting + Рэзка паліганальнай сеткі @@ -2471,7 +2471,7 @@ Please visit http://www.openscad.org/index.html to install it. Mesh analyze - Mesh analyze + Даследаванне паліганальнай сеткі diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm index 36f9ad6682..585cc9f087 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts index ae28137bdc..dcbc0cb7a1 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts @@ -1370,7 +1370,7 @@ Please run the command to repair folds first &Create - &Crear + &Crea diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm index 5719a39962..804b58ba3e 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index 08865750f6..b9d1ff4af3 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -750,7 +750,7 @@ Mesh union - Объеденить полигональные сетки + Объединить полигональные сетки diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.qm index 29682fe265..9a7da6a607 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.ts index 2f08ccc035..a1348bdc6e 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_be.ts @@ -232,7 +232,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Snap tolerance to vertices - Допуск прывязкі да вяршыняў + Дакладнасць прывязкі да вяршыняў diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.qm index c67fe9644f..4eac62dbc6 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.ts index a5a2767273..01f8347e24 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_be.ts @@ -57,7 +57,7 @@ The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit - Найбольшая колькасць граняў шматкутніка, прызмы альбо ўсечанага конусу. Калі fn больш гэтага значэння, то аб'ект лічыцца кругавым. Ужыць 0, каб адключыць абмежаванні + Найбольшая колькасць граняў шматкутніка, прызмы ці ўсечанага конусу. Калі fn болей гэтага значэння, то аб'ект лічыцца кругавым. Ужыць 0, каб адключыць абмежаванні @@ -72,7 +72,7 @@ The transfer mechanism for getting data to and from OpenSCAD - Механізм перадачы дадзеных у і з OpenSCAD + Механізм перадачы дадзеных у OpenSCAD і з яго @@ -118,12 +118,12 @@ Minimum angle for a fragment - Найменшы кут фрагменту + Найменшы вугал фрагменту angular (fa) - кутні (fa) + вуглавы (fa) @@ -248,7 +248,7 @@ Mesh Boolean - Паліганальная сетка - лагічнае значэнне + Лагічная аперацыя з паліганальнай сеткай @@ -258,12 +258,12 @@ OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - Файл OpenSCAD змяшчае як двухмерныя, так і трохмерныя формы. У гэтым імпарцёры такое не падтрымліваецца, усе формы павінны мець аднолькавую памернасць. + Файл OpenSCAD змяшчае як двухмерныя, так і трохмерныя фігуры. У гэтым імпарцёры такое не падтрымліваецца, усе формы павінны мець аднолькавую памернасць. Error: either all shapes must be 2D or all shapes must be 3D - Памылка: альбо ўсе фігуры павінны быць дзвюхмерныя, альбо ўсе фігуры павінны быць трохмерныя + Памылка: альбо ўсе фігуры павінны быць дзвюхмернымі, альбо ўсе фігуры павінны быць трохмернымі @@ -434,7 +434,7 @@ Mesh Boolean... - Паліганальная сетка - лагічнае значэнне... + Лагічная аперацыя з паліганальнай сеткай... diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm index 0bcc7128c1..4c4582e0c4 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts index a525f28dc1..17e3e36455 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts @@ -212,7 +212,7 @@ Load - Load + Carrega @@ -387,7 +387,7 @@ Expand all placements downwards in the Tree view - Expand all placements downwards in the Tree view + Expandeix totes les col·locacions cap avall a la vista en arbre @@ -400,7 +400,7 @@ Replace an object in the Tree view. Please select old, new, and parent object - Replace an object in the Tree view. Please select old, new, and parent object + Substitueix un objecte a la vista en arbre. Seleccioneu un objecte antic, un de nou i un de primari diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm index fbb57423bf..f633f7bcbe 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts index 2c851c210f..f6e28af8e0 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts @@ -174,27 +174,27 @@ If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. - If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + Ha az OpenSCAD végrehajtása nem tölt be ideiglenes fájlt, a FreeCAD OpenSCAD munkapad beállításaival módosítsa az átviteli mechanizmust. It looks like you may be using a sandboxed version of FreeCAD. - It looks like you may be using a sandboxed version of FreeCAD. + Úgy néz ki, mintha a FreeCAD sandbox verzióját használná. Unable to explode %s - Unable to explode %s + Képtelen szétrobbantani ezt %s Convert Edges to Faces - Convert Edges to Faces + Élek felületté konvertálása Please select 3 objects first - Please select 3 objects first + Kérem válasszon ki először 3 tárgyat @@ -230,7 +230,7 @@ as Mesh - as Mesh + mint háló @@ -242,13 +242,13 @@ Perform - Perform + Végrehajt Mesh Boolean - Mesh Boolean + Logikai háló @@ -258,7 +258,7 @@ OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + OpenSCAD fájl tartalmaz mind a 2D és 3D alakzatokat. Ezt ebben az importőrben nem támogatják, minden formának azonos dimenzióval kell rendelkeznie. @@ -269,7 +269,7 @@ Unsupported Function - Unsupported Function + Nem támogatott funkció @@ -283,12 +283,12 @@ Explode Group - Explode Group + Csoport szétrobbantása Remove fusion, apply placement to children, and color randomly - Remove fusion, apply placement to children, and color randomly + Távolítsa el a fúziót, alkalmazzon véletlenszerű elhelyezést az alárendeltekre és a színre @@ -296,12 +296,12 @@ Color Shapes - Color Shapes + Alakzatok színezése Color Shapes by validity and type - Color Shapes by validity and type + Alakzatok színezése az érvényesség és típus szerint @@ -309,7 +309,7 @@ Convert Edges To Faces - Convert Edges To Faces + Élek konvertálása felületekké @@ -317,12 +317,12 @@ Refine Shape Feature - Refine Shape Feature + Alakzat tulajdonság finomítása Create Refine Shape Feature - Create Refine Shape Feature + Alakzat tulajdonság finomítás létrehozása @@ -330,12 +330,12 @@ Mirror Mesh Feature... - Mirror Mesh Feature... + Tükrözött Háló Funkció... Create Mirror Mesh Feature - Create Mirror Mesh Feature + Tükrözött Háló Funkció Létrehozása @@ -343,7 +343,7 @@ Scale Mesh Feature... - Scale Mesh Feature... + Hálótulajdonság méretező... diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm index 4ef7270dcd..b365185523 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts index 0e811d5d4b..1c6f7d9a78 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts @@ -107,7 +107,7 @@ Maximum fragment size - Maximum fragment size + Максимальный размер фрагмента @@ -184,17 +184,17 @@ Unable to explode %s - Unable to explode %s + Не удалось разъединить %s Convert Edges to Faces - Convert Edges to Faces + Преобразовать рёбра в грани Please select 3 objects first - Please select 3 objects first + Сначала необходимо выбрать 3 объекта @@ -236,7 +236,7 @@ Add OpenSCAD Element - Add OpenSCAD Element + Добавить элемент OpenSCAD @@ -253,23 +253,23 @@ Minkowski sum - Minkowski sum + Сумма Минковского OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + Файл OpenSCAD содержит как 2D, так и 3D фигуры. В данном модуле импорта это не поддерживается, все фигуры должны иметь одинаковую размерность. Error: either all shapes must be 2D or all shapes must be 3D - Error: either all shapes must be 2D or all shapes must be 3D + Ошибка: все фигуры должны быть только 2D или только 3D Unsupported Function - Unsupported Function + Неподдерживаемая функция @@ -283,12 +283,12 @@ Explode Group - Explode Group + Разъединить группу Remove fusion, apply placement to children, and color randomly - Remove fusion, apply placement to children, and color randomly + Убирает слияние, размещает и меняет цвет дочерних элементов случайным образом @@ -309,7 +309,7 @@ Convert Edges To Faces - Convert Edges To Faces + Преобразовать рёбра в грани @@ -395,7 +395,7 @@ Replace Object - Replace Object + Заменить объект @@ -408,12 +408,12 @@ Remove Objects and their Children - Remove Objects and their Children + Удалить объекты и их дочерние элементы Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Удаляет выбранные объекты и все дочерние, на которые нет ссылок из других объектов @@ -421,12 +421,12 @@ Add OpenSCAD Element... - Add OpenSCAD Element... + Добавить элемент OpenSCAD... Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Добавить элемент OpenSCAD, введя скрипт и запустив OpenSCAD @@ -452,7 +452,7 @@ Use OpenSCAD to create a hull - Use OpenSCAD to create a hull + Использовать OpenSCAD для создания выпуклой оболочки @@ -460,12 +460,12 @@ OpenSCAD Tools - OpenSCAD Tools + Инструменты OpenSCAD Frequently-used Part WB tools - Frequently-used Part WB tools + Часто используемые инструменты верстака Part @@ -473,12 +473,12 @@ Minkowski sum - Minkowski sum + Сумма Минковского Use OpenSCAD to create a Minkowski sum - Use OpenSCAD to create a Minkowski sum + Использовать OpenSCAD, чтобы сделать сумму Минковского diff --git a/src/Mod/Part/Gui/Resources/translations/Part_be.qm b/src/Mod/Part/Gui/Resources/translations/Part_be.qm index f6584a4fa0..4bbced2a05 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_be.qm and b/src/Mod/Part/Gui/Resources/translations/Part_be.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_be.ts b/src/Mod/Part/Gui/Resources/translations/Part_be.ts index 9a87e67594..d87ea46a3d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_be.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_be.ts @@ -130,7 +130,7 @@ Deactivated AttachmentPoint mode caption - Дэактываваны + Адключаны @@ -184,7 +184,7 @@ Point is put on edge, MapPathParameter controls where. Additionally, vertex can be linked in for making a projection. AttachmentPoint mode tooltip - Кропка ставіцца на рабро, налада MapPath вызначае менавіта дзе. Акрамя таго, вяршыня можа быць звязана для стварэння праекцыі. + Кропка ставіцца на рабро, налада MapPathParameter вызначае менавіта дзе. Акрамя таго, вяршыня можа быць звязана для стварэння праекцыі. @@ -265,7 +265,7 @@ Deactivated AttachmentLine mode caption - Дэактываваны + Адключаны @@ -386,7 +386,7 @@ Align to N vector of Frenet-Serret coordinate system of curved edge. Optional vertex link defines where. AttachmentLine mode tooltip - Выраўнаваць па N вектару сістэмы каардынатаў Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. + Выраўнаваць па N вектару сістэмы каардынат Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. @@ -398,7 +398,7 @@ Align to B vector of Frenet-Serret coordinate system of curved edge. Optional vertex link defines where. AttachmentLine mode tooltip - Выраўнаваць па B вектару сістэмы каардынатаў Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. + Выраўнаваць па B вектару сістэмы каардынат Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. @@ -411,7 +411,7 @@ Tangent to surface, along U parameter. Vertex link defines where. AttachmentLine mode tooltip - Датычная да паверхня, наўздоўж параметра U. Сувязь вяршыні вызначае дзе дотык. + Датычная да паверхні, наўздоўж параметра U. Сувязь вяршыні вызначае дзе дотык. @@ -510,7 +510,7 @@ Deactivated AttachmentPlane mode caption - Дэактываваны + Адключаны @@ -614,7 +614,7 @@ Align to Frenet-Serret coordinate system of curved edge. Optional vertex link defines where. AttachmentPlane mode tooltip - Выраўнаваць па сістэмы каардынатаў Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. + Выраўнаваць па сістэмы каардынат Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. @@ -650,7 +650,7 @@ Plane is perpendicular to edge, and Y axis is matched with axis of osculating circle. Optional vertex link defines where. AttachmentPlane mode tooltip - Плоскасць перпендыкулярная рабру, і вось Y супадае з воссю датыкальная акружнасць. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. + Плоскасць перпендыкулярная рабру, і вось Y супадае з воссю датыкальнай акружнасці. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. @@ -707,7 +707,7 @@ Deactivated Attachment3D mode caption - Дэактываваны + Адключаны @@ -731,7 +731,7 @@ Object's X Y Z Attachment3D mode caption - X Y Z аб'екта + X Y Z аб'екту @@ -743,25 +743,25 @@ Object's X Z Y Attachment3D mode caption - X Z Y аб'екта + X Z Y аб'екту X', Y', Z' axes are matched with object's local X, Z, -Y, respectively. Attachment3D mode tooltip - Восі X', Y', Z ' супастаўляюцца адпаведна з лакальнымі восямі X, Z,- Y аб'екта. + Восі X', Y', Z' супастаўляюцца адпаведна з лакальнымі восямі X, Z, -Y аб'екта. Object's Y Z X Attachment3D mode caption - Y Z X аб'екта + Y Z X аб'екту X', Y', Z' axes are matched with object's local Y, Z, X, respectively. Attachment3D mode tooltip - Восі X', Y', Z ' супастаўляюцца адпаведна з лакальнымі восямі Y, Z, X аб'екта. + Восі X', Y', Z' супастаўляюцца адпаведна з лакальнымі восямі Y, Z, X аб'екта. @@ -811,7 +811,7 @@ Align to Frenet-Serret coordinate system of curved edge. Optional vertex link defines where. Attachment3D mode tooltip - Выраўнаваць па сістэмы каардынатаў Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. + Выраўнаваць па сістэмы каардынат Френе-Серра рабра крывізны. Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. @@ -1159,7 +1159,7 @@ Box selection - Box selection + Вылучыць вобласць @@ -1177,7 +1177,7 @@ Analyzes Geometry For Errors - Аналізуе Геаметрыю на памылкі + Даследуе геаметрыю на памылкі @@ -1286,14 +1286,13 @@ if the measured points have moved. Toggle 3D - Пераключыць трохмерны выгляд + Пераключыць трохмернае прадстаўленне Toggle on and off all direct dimensions, including angular. - Уключыць і выключыць усе прамыя вымярэнні, -у тым ліку вуглавыя. + Уключае і выключае ўсе прамыя вымярэнні, у тым ліку вуглавыя. @@ -1312,7 +1311,7 @@ including angular. Toggle on and off all currently visible dimensions, direct, orthogonal, and angular. - Уключыць і выключыць усе бачныя ў дадзены момант вымярэнні: + Уключае і выключае ўсе бачныя ў дадзены момант вымярэнні: прамыя, артаганальныя і вуглавыя. @@ -1326,16 +1325,15 @@ direct, orthogonal, and angular. Toggle Delta - Пераключыць дэльту + Пераключыць рэжым дэльты Toggle on and off all orthogonal dimensions, meaning that a direct dimension will be decomposed into its X, Y, and Z components. - Уключыць і выключыць усе артаганальныя вымярэнні, -гэта азначае, што прамое вымярэнне будзе падзелена -на яго складнікі X, Y і Z. + Уключае і выключае ўсе артаганальныя вымярэнні, +гэта азначае, што прамое вымярэнне будзе падзелена на яго складнікі X, Y і Z. @@ -1348,12 +1346,12 @@ into its X, Y, and Z components. Boolean... - Лагічнае значэнне... + Лагічная аперацыя... Run a boolean operation with two shapes selected - Запусціць аперацыю лагічнага значэння з дзвюма абранымі фігурамі + Запусціць лагічную аперацыю з дзвюма абранымі фігурамі @@ -1535,7 +1533,7 @@ into its X, Y, and Z components. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Інструменты для падзелу фігур і стварэння складаных цел. @@ -2537,12 +2535,12 @@ Note: The placement is expressed in local space of object being attached. Boolean Operation - Аперацыя лагічнага значэння + Лагічная аперацыя Boolean operation - Аперацыя лагічнага значэння + Лагічная аперацыя @@ -2616,7 +2614,7 @@ Note: The placement is expressed in local space of object being attached. Cannot perform a boolean operation with the same shape - Немагчыма выканаць аперацыя лагічнага значэння з той жа фігурай + Немагчыма выканаць лагічную аперацыю з той жа фігурай @@ -2763,9 +2761,7 @@ it inside the Placement property. This parameter indicates whether parametric curves (curves in parametric space of surface) should be written into the STEP file. This parameter can be set to off in order to minimize the size of the resulting STEP file. - Гэтая налада паказвае, ці варта запісваць параметрычныя крывыя (крывыя ў параметрычнай прасторы паверхні) -у файл STEP. Гэтую наладу можна задаць у значэнні Выключана, каб паменшыць -памер атрыманага файла STEP. + Гэтая налада паказвае, ці варта запісваць параметрычныя крывыя (крывыя ў параметрычнай прасторы паверхні) у файл STEP. Гэтую наладу можна задаць у значэнні Выключана, каб паменшыць памер атрыманага файла STEP. @@ -2813,7 +2809,7 @@ the size of the resulting STEP file. Click to start selecting an edge in 3d view. - Пстрыкнуць, каб пачаць выбар рабра ў акне трохмернага выгляду. + Пстрыкнуць, каб пачаць выбар рабра ў акне трохмернага прадстаўлення. @@ -2906,7 +2902,7 @@ If both lengths are zero, magnitude of direction is used. If checked, extruding closed wires will give solids, not shells. - Калі птушка, выдушыць замкнёныя ломаныя лініі прывядзе да суцэльнага цела, а не абалонкі. + Калі птушка, выдушыць замкнутыя ломаныя лініі прывядзе да суцэльнага цела, а не абалонкі. @@ -2916,7 +2912,7 @@ If both lengths are zero, magnitude of direction is used. Select shape(s) that should be extruded - Абраць фігуру(ы), якія неабходна выдушыць + Абраць фігуры, якія неабходна выдушыць @@ -2956,7 +2952,7 @@ If both lengths are zero, magnitude of direction is used. Extrusion direction link is invalid. %1 - Недапушчальны спасылак напрамку выдушвання. + Хібная сувязь напрамку выдушвання. %1 @@ -3036,7 +3032,7 @@ If both lengths are zero, magnitude of direction is used. None - None + Нічога @@ -3225,7 +3221,7 @@ Please check one or more edge entities first. Import - Import + Імпарт @@ -3281,14 +3277,13 @@ Please check one or more edge entities first. Import - Import + Імпарт If checked, no Compound merge will be done during file reading (slower but higher details). - Калі Птушка, зліццё Злучэння не будзе выконвацца -падчас чытання файла (павольней, але дакладней). + Калі Птушка, зліццё Злучэння не будзе выконвацца падчас чытання файла (павольней, але дакладней). @@ -3303,7 +3298,7 @@ during file reading (slower but higher details). Use LinkGroup - Ужыць суполку спасылак + Ужыць суполку сувязяў @@ -3318,7 +3313,7 @@ during file reading (slower but higher details). Reduce number of objects using Link array - Паменшыць колькасць аб'ектаў, ужываючы Масіў спасылак + Паменшыць колькасць аб'ектаў, пры ўжыванні артаганальнай сеткі @@ -3339,7 +3334,7 @@ during file reading (slower but higher details). Show progress bar when importing - Адлюстроўваць індыкатар пры імпартаванні + Паказаць індыкатар пры імпартаванні @@ -3929,12 +3924,12 @@ during file reading (slower but higher details). Show faces - Адлюстраваць грані + Паказаць грані Show Edges - Адлюстраваць рэбры + Паказаць рэбры @@ -4088,7 +4083,7 @@ during file reading (slower but higher details). Revolution axis link is invalid. %1 - Сувязь восі вярчэння няправільная. + Хібная сувязь восі вярчэння. %1 @@ -4143,7 +4138,7 @@ during file reading (slower but higher details). Maximum deviation depending on the model bounding box - Найбольшае адхіленне ў залежнасці ад абмежаванага прастакутніка мадэлі + Найбольшае адхіленне ў залежнасці ад габарытаў мадэлі @@ -4176,12 +4171,12 @@ during file reading (slower but higher details). Automatically check model after boolean operation - Аўтаматычна праверыць мадэль пасля аперацыі лагічнага значэння + Аўтаматычна праверыць мадэль пасля лагічнай аперацыі Automatically refine model after boolean operation - Аўтаматычна ўдасканаліць мадэль пасля аперацыі лагічнага значэння + Аўтаматычна ўдасканаліць мадэль пасля лагічнай аперацыі @@ -4196,7 +4191,7 @@ during file reading (slower but higher details). Add name of base object - Дадаць назву базаваму аб'екту + Дадаць назву асноўнаму аб'екту @@ -4348,22 +4343,22 @@ during file reading (slower but higher details). Bounding box color - Колер абмежаванага прастакутніка + Колер габарытаў The color of bounding boxes in the 3D view - Колер абмежаванага прастакутніка ў трохмерным выглядзе + Колер габарытаў у трохмерным прадстаўленні Bounding box font size - Памер шрыфту абмежаванага прастакутніка + Памер шрыфту габарытаў The font size of bounding boxes in the 3D view - Памер шрыфту абмежаванага прастакутніка ў трохмерным выглядзе + Памер шрыфту габарытаў у трохмерным прадстаўленні @@ -4372,9 +4367,7 @@ If not checked, it depends on the option "Backlight color" (preferences section Display -> 3D View); either the backlight color will be used or black. Ніжні бок паверхні будзе адлюстроўвацца так жа, як і верхні. -Калі не птушка, гэта залежыць ад налады "Колер асвятлення". -(падзел пераваг Праецыраванне - > Трохмерны выгляд); -будзе ўжывацца альбо колер асвятлення, альбо чорны. +Калі не птушка, гэта залежыць ад налады "Колер асвятлення" (падзел пераваг Праецыраванне - > Трохмернае прадстаўленне); будзе ўжывацца альбо колер асвятлення, альбо чорны. @@ -4427,7 +4420,7 @@ will be used or black. 3D view - трохмерны выгляд + трохмернае прадстаўленне @@ -4550,7 +4543,7 @@ the sketch plane's normal vector will be used Base point - Базавая кропка + Асноўная кропка @@ -4647,62 +4640,88 @@ the sketch plane's normal vector will be used + Color of cut face Колер грані зрэзу + Color Колер + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Калі птушка, колер і празрыстасць -будуць узятыя з выразаных аб'ектаў. -Працуе толькі калі ўсе аб'екты маюць аднолькавыя значэнні. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Аўтаматычнае - + + Transparency of cut face Празрыстасць грані зрэзу - + + Transparency Празрыстасць - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Абнаўляе спіс бачных аб'ектаў - + Refresh view Абнавіць выгляд - + When the dialog is closed, only created cuts will be visible - Калі зачыняецца дыялогавае акно, -бачныя толькі створаныя зрэзы + Калі дыялогавае акно зачыніць, будуць бачныя толькі створаныя зрэзы - + Keep only cuts visible when closing Калі зачыніць, павінны быць бачныя толькі зрэзы - + Sliders are disabled for assemblies Паўзункі адключаныя для зборак @@ -4775,7 +4794,7 @@ only created cuts will be visible Select a closed set of edges - Абраць замкнёны набор рэбраў + Абраць замкнуты набор рэбраў @@ -4803,7 +4822,7 @@ only created cuts will be visible Enter tolerance for sewing shape: - Увядзіце допуск для сшывання фігуры: + Увядзіце дакладнасць для сшывання фігуры: @@ -4831,7 +4850,7 @@ only created cuts will be visible Invalid selection - Недапушчальны выбар + Хібны выбар @@ -4861,7 +4880,7 @@ only created cuts will be visible Select one or more connected edges in the 3d view and press 'Done' - Абярыце адно ці некалькі злучаных рэбраў у трохмерным выглядзе і націсніце 'Гатова' + Абярыце адно ці некалькі злучаных рэбраў у трохмерным прадстаўленні, і націсніце 'Гатова' @@ -4873,7 +4892,7 @@ only created cuts will be visible The selected sweep path is invalid. - Абраны шлях выцягвання недапушчальны. + Хібны абраны шлях выцягвання. @@ -5116,7 +5135,7 @@ Default: false Extra boolean operations check that can sometimes find errors that the standard BRep geometry check misses. These errors do not always mean the checked object is unusable. Default: false - Дадатковая праверка аперацыі лагічных значэнняў, якая часам можа выяўляць памылкі, + Дадатковая праверка лагічнай аперацыі, якая часам можа выяўляць памылкі, якія прапускае стандартная праверка геаметрыі B-Rep. Гэтыя памылкі не заўсёды азначаюць, што правераны аб'ект непрыдатны для ўжывання. Першапачаткова: false @@ -5163,8 +5182,9 @@ the check geometry tool. Default: false Show advanced shape content. Changes will take effect next time you use the check geometry tool. Default: false - Адлюстраваць пашыраны змест фігуры. Змены ўступяць у сілу пры наступным ужыванні -інструмента праверкі геаметрыі. Першапачаткова: false + Паказаць пашыраны змест фігуры. +Змены ўступяць у сілу пры наступным ужыванні інструмента праверкі геаметрыі. +Першапачаткова: false @@ -5256,12 +5276,12 @@ Individual BOP Checks: Invalid curve on surface - Недапушчальная крывая на паверхні + Хібная крывая на паверхні Check for invalid curves on surfaces. Default: true - Праверыць на недапушчальныя крывая на паверхні. Першапачаткова: true + Праверыць на хібныя крывая на паверхні. Першапачаткова: true @@ -5319,7 +5339,7 @@ Individual BOP Checks: Click on the faces in the 3D view to select them - Націснуць на грань, каб абраць яе ў трохмерным выглядзе + Націснуць на грань, каб абраць яе ў трохмерным прадстаўленні @@ -5341,12 +5361,12 @@ Individual BOP Checks: When checked, the you can select multiple faces by dragging a selection rectangle in the 3D view Калі птушка, вы можаце абраць некалькі граняў, -калі перацягнеце прастакутнік вылучэння ў трохмерным выглядзе +калі перацягнеце прастакутнік вылучэння ў трохмерным прадстаўленні Box selection - Box selection + Вылучыць вобласць @@ -5369,7 +5389,7 @@ by dragging a selection rectangle in the 3D view Closed - Зачынены + Замкнуты @@ -5532,8 +5552,7 @@ by dragging a selection rectangle in the 3D view Select one or more profiles and select an edge or wire in the 3D view for the sweep path. - Абярыце адзін ці некалькі профіляў і абярыце рабро ці ломаную лінію -ў трохмерным выглядзе для шляху выцягвання. + Абярыце адзін ці некалькі профіляў, і абярыце рабро ці ломаную лінію ў трохмерным прадстаўленні для шляху выцягвання. @@ -5690,7 +5709,7 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Do you want to continue? - Выкарыстанне несуцэльных цел для аперацый лагічнага значэння можа прывесці да нечаканых вынікаў. + Выкарыстанне несуцэльных цел для лагічных аперацый можа прывесці да нечаканых вынікаў. Ці хочаце вы працягнуць? @@ -5785,17 +5804,17 @@ Do you want to continue? Invalid Point On Curve - Недапушчальная кропка на крывой + Хібная кропка на крывой Invalid Point On Curve On Surface - Недапушчальнай кропка на крывой паверхні + Хібная кропка на крывой паверхні Invalid Point On Surface - Недапушчальная кропка на паверхні + Хібная кропка на паверхні @@ -5810,7 +5829,7 @@ Do you want to continue? Invalid 3D Curve - Недапушчальная трохмерная крывая + Хібная трохмерная крывая @@ -5820,27 +5839,27 @@ Do you want to continue? Invalid Curve On Surface - Недапушчальная крывая на паверхні + Хібная крывая на паверхні Invalid Curve On Closed Surface - Недапушчальная крывая на замкнутай паверхні + Хібная крывая на замкнутай паверхні Invalid Same Range Flag - Недапушчальны дыяпазон разметкі + Хібны дыяпазон разметкі Invalid Same Parameter Flag - Недапушчальная налада разметкі + Хібная налада разметкі Invalid Degenerated Flag - Недапушчальнае памяншэнне разметкі + Хібнае памяншэнне разметкі @@ -5850,12 +5869,12 @@ Do you want to continue? Invalid MultiConnexity - Недапушчальны шматсувязь + Хібная шматсувязь Invalid Range - Недапушчальны дыяпазон + Хібны дыяпазон @@ -5880,7 +5899,7 @@ Do you want to continue? Invalid Wire - Недапушчальная ломаная лінія + Хібная ломаная лінія @@ -5895,7 +5914,7 @@ Do you want to continue? Invalid Imbrication Of Wires - Недапушчальнае перакрыццё ломаных ліній + Хібнае перакрыццё ломаных ліній @@ -5940,7 +5959,7 @@ Do you want to continue? Invalid Tolerance Value - Недапушчальнае значэнне дакладнасці + Хібнае значэнне дакладнасці @@ -6010,7 +6029,7 @@ Do you want to continue? BOPAlgo_InvalidCurveOnSurface - BOPAlgo Недапушчальная крывая на паверхні + BOPAlgo Хібная крывая на паверхні @@ -6021,7 +6040,7 @@ Do you want to continue? Invalid - Недапушчальны + Хібны @@ -6093,7 +6112,7 @@ Do you want to continue? Show control points - Адлюстраваць кантрольныя кропкі + Паказаць кантрольныя кропкі @@ -6136,7 +6155,7 @@ Do you want to continue? Boolean - Лагічнае значэнне + Лагічная аперацыя @@ -6215,7 +6234,7 @@ Do you want to continue? Select base object, then the object to embed, and then invoke this tool. - Абярыце базавы аб'ект, потым аб'ект для ўбудавання, а затым запусціце гэты інструмент. + Абярыце асноўны аб'ект, далей аб'ект для ўбудавання, а потым запусціце гэты інструмент. @@ -6300,7 +6319,7 @@ Do you want to continue? Boolean fragments - Фрагменты лагічнага значэння + Фрагменты лагічнай аперацыі @@ -6309,7 +6328,7 @@ or from the shapes inside a compound. This is a boolean union which is then sliced at the intersections of the original shapes. A 'Compound Filter' can be used to extract the individual slices. - Стварыце аб'ект 'Фрагменты лагічнага значэння' з двух ці болей абраных аб'ектаў, + Стварыце аб'ект 'Фрагменты лагічнай аперацыі' з двух ці болей абраных аб'ектаў, альбо з фігур унутры злучэння. Гэта лагічнае аб'яднанне, якое потым разразаецца на скрыжаваннях зыходных фігур. @@ -6319,7 +6338,7 @@ A 'Compound Filter' can be used to extract the individual slices. Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). - Абярыце па меншай меры два аб'екты, альбо адно ці некалькі злучэнняў. Калі абрана толькі адное злучэнне, складовыя фігуры будуць перасякацца адзін з адным (у адваротным выпадку злучэнні з самаперакрыжаванямі недапушчальныя). + Абярыце па меншай меры два аб'екты, альбо адно ці некалькі злучэнняў. Калі абрана толькі адное злучэнне, складовыя фігуры будуць перасякацца адзін з адным (у адваротным выпадку злучэнні з самаперакрыжаванямі хібныя). @@ -6445,7 +6464,7 @@ It will create a 'Compound Filter' for each shape. Failed to parse link (more than one colon encountered) - Не атрымалася ўдалося апрацаваць спасылак (сустракаецца больш, чым аднаго двукроп'е) + Не атрымалася апрацаваць сувязь(сустракаецца больш, чым адно двукроп'е) @@ -6512,7 +6531,7 @@ It will create a 'Compound Filter' for each shape. Failed to resolve links. {} - Не атрымалася дазволіць спасылкі. {} + Не атрымалася дазволіць сувязі. {} diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.qm b/src/Mod/Part/Gui/Resources/translations/Part_ca.qm index af3baf4514..a79c99527a 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ca.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ca.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index 6049e99e8c..65237a71b4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -1373,7 +1373,7 @@ en els seus components X, Y i Z. Create a cube solid - Crear un cub sòlid + Crea un cub sòlid @@ -1391,7 +1391,7 @@ en els seus components X, Y i Z. Create a box solid without dialog - Crear sòlid sense diàleg + Crea sòlid sense diàleg @@ -1409,7 +1409,7 @@ en els seus components X, Y i Z. Create a box solid without dialog - Crear sòlid sense diàleg + Crea sòlid sense diàleg @@ -1573,7 +1573,7 @@ en els seus components X, Y i Z. Create a cone solid - Crear un con sòlid + Crea un con sòlid @@ -1629,7 +1629,7 @@ en els seus components X, Y i Z. Create a Cylinder - Crear un Cilindre + Crea un cilindre @@ -1827,7 +1827,7 @@ en els seus components X, Y i Z. Create solid from a shell or compound - Crear sòlid a partir d'un entorn o compost + Crea un sòlid a partir d'un entorn o compost @@ -1930,12 +1930,12 @@ en els seus components X, Y i Z. Create primitives... - Crear primitives... + Crea primitives... Creation of parametrized geometric primitives - Crear primitives parametritzades + Crea primitives parametritzades @@ -2026,7 +2026,7 @@ de projecció. Create ruled surface - Crear Superfície Reglada + Crea una superfície reglada @@ -2075,12 +2075,12 @@ de projecció. Create shape from mesh... - Crear la forma de malla... + Crea la forma de malla... Create shape from selected mesh object - Crear la forma de l'objecte de malla seleccionat + Crea la forma de l'objecte de malla seleccionat @@ -2093,12 +2093,12 @@ de projecció. Create simple copy - Crear còpia simple + Crea una còpia simple Create a simple non-parametric copy - Crear una còpia simple no paramètrica + Crea una còpia simple no paramètrica @@ -2111,12 +2111,12 @@ de projecció. Create Cylinder... - Crear Cilindre... + Crea un cilindre... Create a Cylinder - Crear un Cilindre + Crea un cilindre @@ -2202,7 +2202,7 @@ de projecció. Create a torus solid - Crear un toroide sòlid + Crea un toroide sòlid @@ -2294,12 +2294,12 @@ de projecció. Create ruled surface - Crear Superfície Reglada + Crea una superfície reglada Create Part Cylinder - Crear Cilindre + Crea un cilindre @@ -2616,7 +2616,7 @@ Nota: La ubicació s'expressa en l'espai local de l'objecte que s'adjunta. Cannot perform a boolean operation with the same shape - No pot realitzar una operació booleana amb la mateixa forma + No es pot realitzar una operació booleana amb la mateixa forma @@ -2915,7 +2915,7 @@ Si les dues longituds són zero, s'utilitza la magnitud de la direcció. Create solid - Crear sòlid + Crea un sòlid @@ -3890,7 +3890,7 @@ durant la lectura del fitxer (detalls més lents però més alts). &Create - &Crear + &Crea @@ -4171,7 +4171,7 @@ durant la lectura del fitxer (detalls més lents però més alts). Automatically check model after boolean operation - Automàticament refinar el model de després de l'operació booleana + Comprova automàticament el model després de l'operació booleana @@ -4181,7 +4181,7 @@ durant la lectura del fitxer (detalls més lents però més alts). Automatically refine model after sketch-based operation - Automàticament refinar el model de després de l'operació booleana + Refina automàticament el model després de l'operació basada en el croquis @@ -4244,7 +4244,7 @@ durant la lectura del fitxer (detalls més lents però més alts). Font name - Nom de la font + Nom del tipus de lletra @@ -4642,62 +4642,89 @@ s'utilitzarà el vector normal del pla d'esbós + Color of cut face Color de la cara tallada + Color Color + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Si està marcat, el color i la transparència -s'agafarà dels objectes tallats. -Només funciona si tots els objectes tenen els mateixos valors. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Transparència de la cara tallada - + + Transparency Transparència - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Actualitza la llista d'objectes visibles - + Refresh view Actualitza la vista - + When the dialog is closed, only created cuts will be visible Quan el diàleg està tancat, només seran visibles els talls creats - + Keep only cuts visible when closing Mantenir visibles només els talls al tancar - + Sliders are disabled for assemblies Els controls lliscants estan desactivats per als muntatges @@ -4755,7 +4782,7 @@ només seran visibles els talls creats Select two vertices to create an edge - Seleccioneu dos vèrtexs per crear un Cantell + Seleccioneu dos vèrtexs per crear un cantell @@ -5353,7 +5380,7 @@ by dragging a selection rectangle in the 3D view Create solid - Crear sòlid + Crea un sòlid @@ -5442,7 +5469,7 @@ by dragging a selection rectangle in the 3D view Create shape - Crear Pla + Crea un pla @@ -5515,7 +5542,7 @@ by dragging a selection rectangle in the 3D view Create solid - Crear sòlid + Crea un sòlid @@ -6302,11 +6329,10 @@ or from the shapes inside a compound. This is a boolean union which is then sliced at the intersections of the original shapes. A 'Compound Filter' can be used to extract the individual slices. - Create a 'Boolean Fragments' object from two or more selected objects, -or from the shapes inside a compound. -This is a boolean union which is then sliced at the intersections -of the original shapes. -A 'Compound Filter' can be used to extract the individual slices. + Creeu un objecte de "Fragments booleans" a partir de dos objectes seleccionats o més, +o de les formes dins d'un compost. +Aquesta unió booleana després es tallarà a les interseccions de les formes originals. +Es pot utilitzar un "Filtre compost" per extreure els talls individuals. @@ -6332,19 +6358,19 @@ A 'Compound Filter' can be used to extract the individual slices. Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. - Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. + Seleccioneu almenys dos objectes. El primer és l'objecte que voleu tallar; la resta són objectes amb els quals es farà el tall. Slice apart - Slice apart + Talla i separa Slice a selected object by other objects, and split it apart. It will create a 'Compound Filter' for each slice. - Slice a selected object by other objects, and split it apart. -It will create a 'Compound Filter' for each slice. + Talla un objecte seleccionat per altres objectes i el divideix. +Crearà un «Filtre compost» per a cada tall. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.qm b/src/Mod/Part/Gui/Resources/translations/Part_cs.qm index 6095131ad2..b7650f31a2 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_cs.qm and b/src/Mod/Part/Gui/Resources/translations/Part_cs.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 78501414f0..99e0e889e5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -4645,62 +4645,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Barva + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Automaticky - + + Transparency of cut face Transparency of cut face - + + Transparency Průhlednost - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.qm b/src/Mod/Part/Gui/Resources/translations/Part_de.qm index 198583caf8..993567104f 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_de.qm and b/src/Mod/Part/Gui/Resources/translations/Part_de.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index ffad733def..1f9f2a4e3f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -1534,7 +1534,7 @@ X-, Y- und Z-Komponenten zerlegt wird. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Werkzeuge zum Teilen von Formen und zur Erstellung von Verbundkörpern. @@ -1654,7 +1654,7 @@ X-, Y- und Z-Komponenten zerlegt wird. Part - Part + Formteil @@ -1672,7 +1672,7 @@ X-, Y- und Z-Komponenten zerlegt wird. Part - Formteil + Part @@ -4642,62 +4642,89 @@ der Normalenvektor der Skizze verwendet + Color of cut face Farbe der Schnittfläche + Color Farbe + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Wenn aktiviert, werden Farbe und Transparenz -von den Beschnittobjekten übernommen. -Funktioniert nur, wenn alle Objekte die gleichen Werte haben. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automatisch - + + Transparency of cut face Transparenz der Schnittfläche - + + Transparency Tranparenz - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Aktualisiert die Liste der sichtbaren Objekte - + Refresh view Ansicht aktualisieren - + When the dialog is closed, only created cuts will be visible Wenn der Dialog geschlossen wird, bleiben nur die erstellten Schnitte sichtbar - + Keep only cuts visible when closing Schnitte nur beim Schließen sichtbar lassen - + Sliders are disabled for assemblies Schieberegler sind für Baugruppen deaktiviert diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.qm b/src/Mod/Part/Gui/Resources/translations/Part_el.qm index 6cf5bec13f..7a84f6c909 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_el.qm and b/src/Mod/Part/Gui/Resources/translations/Part_el.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index bb0b0d7c99..aa51a52db9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -4644,61 +4644,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Χρώμα + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Εάν επιλεγεί, το χρώμα και η διαφάνεια θα ληφθούν από τα αντικείμενα που έχουν κοπεί. -Λειτουργεί μόνο αν όλα τα αντικείμενα έχουν τις ίδιες τιμές. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Αυτόματο - + + Transparency of cut face Transparency of cut face - + + Transparency Διαφάνεια - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.qm b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.qm index 055ffa9002..fa111f046c 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.qm and b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts index 8eed85c8a1..c4ab74cadc 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts @@ -1536,7 +1536,7 @@ en sus componentes X, Y y Z. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Herramientas de división de formas y creación Compsolid. @@ -4645,62 +4645,89 @@ se utilizará el vector normal del plano de croquis + Color of cut face Color de la cara cortada + Color Color + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Si está marcado, el color y la transparencia -se tomarán de los objetos cortados. -Funciona solo si todos los objetos tienen los mismos valores. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automático - + + Transparency of cut face Transparencia de la cara cortada - + + Transparency Transparencia - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Actualiza la lista de objetos visibles - + Refresh view Actualizar vista - + When the dialog is closed, only created cuts will be visible Cuando se cierra el diálogo, solo los cortes creados serán visibles - + Keep only cuts visible when closing Mantener solo los cortes visibles al cerrar - + Sliders are disabled for assemblies Los deslizadores están desactivados para ensamblar diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm index 4679ac078e..925f6de842 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm and b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index 473779cf10..9f911aaa83 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -1536,7 +1536,7 @@ en sus componentes X, Y y Z. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Herramientas de división de formas y creación Compsolid. @@ -4642,62 +4642,89 @@ se utilizará el vector normal del plano de croquis + Color of cut face Color de la cara cortada + Color Color + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Si está marcado, el color y la transparencia -se tomarán de los objetos cortados. -Funciona solo si todos los objetos tienen los mismos valores. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Transparencia de la cara cortada - + + Transparency Transparencia - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Actualiza la lista de objetos visibles - + Refresh view Actualizar vista - + When the dialog is closed, only created cuts will be visible Cuando se cierra el diálogo, solo los cortes creados serán visibles - + Keep only cuts visible when closing Mantener solo los cortes visibles al cerrar - + Sliders are disabled for assemblies Los deslizadores están desactivados para ensamblar diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm index 3af07daf1f..f2a19f2c56 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index 79f0ca8aa2..8356751d62 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -4645,62 +4645,89 @@ bestela krokisaren planoren bektore normala erabiliko da + Color of cut face Mozte-aurpegiaren kolorea + Color Kolorea + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Aktibatuta badago, kolorea eta gardentasuna -moztutako objektuetatik hartuko da. -Objektu guztiek balio berak badituzte soilik. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automatikoa - + + Transparency of cut face Mozte-aurpegiaren gardentasuna - + + Transparency Gardentasuna - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Objektu ikusgaien zerrenda freskatzen du - + Refresh view Freskatu bista - + When the dialog is closed, only created cuts will be visible Elkarrizketa-koadro ixten denean, sortutako mozketak soilik daude ikusgai - + Keep only cuts visible when closing Mozteak ixtean soilik mantendu ikusgai - + Sliders are disabled for assemblies Graduatzaileak desgaituta daude muntaketetarako diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.qm b/src/Mod/Part/Gui/Resources/translations/Part_fi.qm index 97a6db60d7..35c3ab84e6 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fi.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fi.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 697f6b28c3..44446329ed 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -4647,62 +4647,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Väri + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Automaattinen - + + Transparency of cut face Transparency of cut face - + + Transparency Läpinäkyvyys - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Päivitä näkymä - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm index 3930f7b9e8..9be2a71ec0 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index d2626cabfd..4de3bfd522 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -1535,7 +1535,7 @@ décomposée en ses composantes X, Y et Z. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Outils pour éclater des formes et créer des composés. @@ -3391,17 +3391,17 @@ during file reading (slower but higher details). X: - X : + X : Y: - Y : + Y : Z: - Z : + Z : @@ -4043,7 +4043,7 @@ during file reading (slower but higher details). Angle: - Angle : + Angle : @@ -4641,62 +4641,89 @@ le vecteur normal du plan de l'esquisse sera utilisé + Color of cut face Couleur de la face coupée + Color Couleur + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Si coché, la couleur et la transparence -vont être prises sur les objets coupés. -Marche uniquement si tous les objets ont les mêmes valeurs. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Transparence de la face coupée - + + Transparency Transparence - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Rafraîchit la liste des objets visibles - + Refresh view Rafraîchir la vue - + When the dialog is closed, only created cuts will be visible Lorsque la boîte de dialogue sera fermée, seules les coupes créées seront visibles - + Keep only cuts visible when closing Garder uniquement les coupes visibles lors de la fermeture - + Sliders are disabled for assemblies Les curseurs sont désactivés pour les assemblages diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.qm b/src/Mod/Part/Gui/Resources/translations/Part_gl.qm index 521f68b007..a563529655 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_gl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_gl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 860195dacb..6dad33f520 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -4639,62 +4639,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Cor + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Automático - + + Transparency of cut face Transparency of cut face - + + Transparency Transparencia - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.qm b/src/Mod/Part/Gui/Resources/translations/Part_hr.qm index 0684d005bd..9289a6cf25 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_hr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_hr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index 2b1e3859aa..432c2df343 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -4661,64 +4661,89 @@ u suprotnom koristit će se normalni vektor ravnine skice + Color of cut face Boja rezne površine + Color Boja + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Ako je označeno, boja i prozirnost -uzet će se iz izrezanih predmeta. -Radi samo ako svi objekti imaju iste vrijednosti. - - +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automatski - + + Transparency of cut face Prozirnost rezne površine - + + Transparency Prozirnost - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Osvježava popis vidljivih objekata - + Refresh view Osvježava pogled - + When the dialog is closed, only created cuts will be visible Kada se dijaloški okvir zatvori, bit će vidljivi samo stvoreni rezovi - + Keep only cuts visible when closing Pri zatvaranju neka budu vidljivi samo rezovi - + Sliders are disabled for assemblies Klizači su onemogućeni za sklopove diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.qm b/src/Mod/Part/Gui/Resources/translations/Part_hu.qm index 286c994e18..ef37865308 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_hu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_hu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index fc4f2d5171..ddbd9db236 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -1535,7 +1535,7 @@ X, Y és Z komponenseire. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Szerszámok a formák felosztásához és az összetett testek létrehozásához. @@ -4048,7 +4048,7 @@ a fájl olvasása közben (lassabb, de pontosabb). Angle: - Szög: + Dőlésszög: @@ -4645,61 +4645,88 @@ the sketch plane's normal vector will be used + Color of cut face Vágott felület színe + Color Szín + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Ha be van jelölve, szín és átlátszóság -a kivágott tárgyból lesz lekérve. -Csak akkor működik, ha minden tárgy azonos paraméterekkel rendelkezik. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automatikus - + + Transparency of cut face A vágott felület átlátszósága - + + Transparency Áttetszőség - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Frissíti a látható tárgyak listáját - + Refresh view Nézet frissítése - + When the dialog is closed, only created cuts will be visible A párbeszédpanel bezárásakor csak a létrehozott metszéspontok láthatók - + Keep only cuts visible when closing Záráskor csak a kivágások legyenek láthatók - + Sliders are disabled for assemblies A csúszkák le vannak tiltva az összeállításoknál diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.qm b/src/Mod/Part/Gui/Resources/translations/Part_it.qm index 337bf0674c..1552d68986 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_it.qm and b/src/Mod/Part/Gui/Resources/translations/Part_it.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 5bb8ea158a..aa474df464 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -4642,62 +4642,89 @@ verrà utilizzato il vettore normale del piano di schizzo + Color of cut face Colore della faccia tagliata + Color Colore + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Se selezionato, il colore e la trasparenza -saranno presi dagli oggetti tagliati. -Funziona solo se tutti gli oggetti hanno gli stessi valori. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Trasparenza della faccia tagliata - + + Transparency Trasparenza - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Aggiorna l'elenco degli oggetti visibili - + Refresh view Aggiorna vista - + When the dialog is closed, only created cuts will be visible Quando la finestra di dialogo è chiusa, saranno visibili solo i tagli creati - + Keep only cuts visible when closing Mantieni solo i tagli visibili durante la chiusura - + Sliders are disabled for assemblies I cursori sono disabilitati per gli assiemi diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm index f45476b12d..f3eff51324 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 0e37ccc9e1..5b9bba44a4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -4640,60 +4640,88 @@ the sketch plane's normal vector will be used + Color of cut face カット面の色 + Color 色 + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - チェックされている場合、色と透明度は切断されたオブジェクトのものが使用されます。 -すべてのオブジェクトが同じ値を持つ場合にのみ動作します。 +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto 自動 - + + Transparency of cut face カット面の透明度 - + + Transparency 透明度 - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects 表示されているオブジェクトのリストを更新 - + Refresh view 表示の更新 - + When the dialog is closed, only created cuts will be visible ダイアログを閉じると作成されたカットだけが表示されます。 - + Keep only cuts visible when closing 終了時にカットのみ表示を続ける - + Sliders are disabled for assemblies アセンブリではスライダーは無効になります。 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.qm b/src/Mod/Part/Gui/Resources/translations/Part_ka.qm index bee84d5133..1e0537dd5b 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ka.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ka.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts index 955d3f4d8e..044b24ad78 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts @@ -4644,62 +4644,89 @@ the sketch plane's normal vector will be used + Color of cut face ამოჭრილი ზედაპირის ფერი + Color ფერი + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - თუ ჩართულია, ფერი და გამჭვირვალობა აღებული -იქნება ამოჭრილი ობიექტებიდან. მუშაობს მხოლოდ -მაშინ, თუ ყველა ობიექტს იგივე მნიშვნელობები აქვს. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto ავტო - + + Transparency of cut face ამოჭრილი ზედაპირის გამჭვირვალობა - + + Transparency გამჭვირვალობა - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects ხილული ობიექტების სიის განახლება - + Refresh view ხედის განახლება - + When the dialog is closed, only created cuts will be visible როცა ეს ფანჯარა დაიხურება, ხილული მხოლოდ შექმნილი ჭრები იქნება - + Keep only cuts visible when closing დახურვისას ხილულად მხოლოდ ამონაჭრების დატოვება - + Sliders are disabled for assemblies ანაწყობებისთვის ჩოჩიები გამორთულია diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.qm b/src/Mod/Part/Gui/Resources/translations/Part_ko.qm index d1086e751c..e857a56f0d 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ko.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ko.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts index ba8b33e5e5..ef9c693984 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts @@ -4646,62 +4646,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color 색상 + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto 자동 - + + Transparency of cut face Transparency of cut face - + + Transparency 투명한 정도 - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.qm b/src/Mod/Part/Gui/Resources/translations/Part_nl.qm index 8cd5b90eb9..91b3762c81 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_nl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_nl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index 6ef94338e0..f11265ee02 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -4646,62 +4646,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Kleur + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Automatisch - + + Transparency of cut face Transparantie van snijvlak - + + Transparency Transparantie - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Vernieuwt de lijst met zichtbare objecten - + Refresh view Weergave vernieuwen - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index c8ae8c0b33..6d419f935f 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 53fc54a0a1..1bf4fe5f2d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -1535,7 +1535,7 @@ na jego składowe X, Y i Z. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Narzędzia do dzielenia kształtu i tworzenia brył zespolonych. @@ -2253,7 +2253,7 @@ Ujęcie widoku określa kierunek rzutowania. Section - Przekrój + Przecięcie @@ -2561,7 +2561,7 @@ Uwaga: Położenie jest wyrażone w przestrzeni lokalnej dołączanego obiektu.< Section - Przecięcie + Przekrój @@ -4646,61 +4646,88 @@ zostanie użyty wektor normalnej płaszczyzny szkicu + Color of cut face Kolor przeciętej ściany + Color Kolor + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Jeśli opcja jest zaznaczona, kolor i przezroczystość -zostaną pobrane z wyciętych obiektów. -Działa tylko wtedy, gdy wszystkie obiekty mają identyczne parametry. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automatycznie - + + Transparency of cut face Przezroczystość ciętej powierzchni - + + Transparency Przezroczystość - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Odświeża listę widocznych obiektów - + Refresh view Odśwież widok - + When the dialog is closed, only created cuts will be visible Po zamknięciu okna dialogowego widoczne są tylko utworzone przecięcia - + Keep only cuts visible when closing Zachowaj tylko przecięcia widoczne podczas zamykania - + Sliders are disabled for assemblies Suwaki są wyłączone dla złożeń diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm index 8567e35ebe..83a6c97fd3 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index d4f5c0561e..4bed43319e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -4630,62 +4630,89 @@ o vetor normal ao plano de esboço será usado + Color of cut face Color of cut face + Color Cor + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Transparency of cut face - + + Transparency Transparência - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm index b422a5df5c..f84e28297e 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index c03f3dc23b..c458693c0b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -4639,62 +4639,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Cor + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Transparency of cut face - + + Transparency Transparência - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm index 730ca65aee..0775e881aa 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 777b34f033..971576cbf5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -4642,62 +4642,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Culoare + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Automat - + + Transparency of cut face Transparency of cut face - + + Transparency Transparenţă - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm index 4d3ff40201..b597ceee44 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 5fee2d8161..e44738ae8c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -1226,7 +1226,7 @@ Clear All - Очистить все + Очистить всё @@ -1534,7 +1534,7 @@ into its X, Y, and Z components. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Инструменты для разделения форм и создания коплексных твердых тел. @@ -1911,7 +1911,7 @@ into its X, Y, and Z components. Create points object from mesh - Create points object from mesh + Создать объект точек из полигональной сетки @@ -2243,7 +2243,7 @@ of projection. Fusion - Fusion + Слияние @@ -2273,7 +2273,7 @@ of projection. Make face - Make face + Сделать грань @@ -2303,7 +2303,7 @@ of projection. Points from mesh - Points from mesh + Точки из полигональной сетки @@ -2729,7 +2729,7 @@ Note: The placement is expressed in local space of object being attached. Export invisible objects - Export invisible objects + Экспортировать невидимые объекты @@ -2750,7 +2750,7 @@ it inside the Placement property. Use legacy export function - Use legacy export function + Использовать устаревшую функцию экспорта @@ -2885,22 +2885,22 @@ If both lengths are zero, magnitude of direction is used. Taper angle along - Taper angle along + Угол сужения вдоль Taper (draft) angle along extrusion direction - Taper (draft) angle along extrusion direction + Угол сужения вдоль направления выдавливания Taper angle against - Taper angle against + Угол сужения напротив Taper (draft) angle against extrusion direction - Taper (draft) angle against extrusion direction + Угол сужения против направления выдавливания @@ -2915,7 +2915,7 @@ If both lengths are zero, magnitude of direction is used. Select shape(s) that should be extruded - Select shape(s) that should be extruded + Выберите одну или несколько фигур для выдавливания @@ -3310,7 +3310,7 @@ during file reading (slower but higher details). Import invisible objects - Import invisible objects + Импортировать невидимые объекты @@ -3320,7 +3320,7 @@ during file reading (slower but higher details). Reduce number of objects - Reduce number of objects + Сократить количество объектов @@ -3926,17 +3926,17 @@ during file reading (slower but higher details). Show faces - Show faces + Показывать грани Show Edges - Show Edges + Показывать рёбра Extrude height - Extrude height + Высота выдавливания @@ -3951,7 +3951,7 @@ during file reading (slower but higher details). Get current camera direction - Get current camera direction + Получить текущее направление камеры @@ -4279,7 +4279,7 @@ during file reading (slower but higher details). Use random color instead - Use random color instead + Использовать случайный цвет @@ -4325,22 +4325,22 @@ during file reading (slower but higher details). Vertex color - Vertex color + Цвет вершины The default color for new vertices - The default color for new vertices + Цвет по умолчанию для новых вершин Vertex size - Vertex size + Размер вершин The default size for new vertices - The default size for new vertices + Размер по умолчанию для новых вершин @@ -4424,7 +4424,7 @@ will be used or black. 3D view - трёхмерный + 3D просмотр @@ -4446,7 +4446,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + абсцисса вектора направления @@ -4456,7 +4456,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + ордината вектора направления @@ -4466,7 +4466,7 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + аппликата вектора направления @@ -4644,63 +4644,89 @@ the sketch plane's normal vector will be used + Color of cut face Цвет поверхность разреза + Color Цвет + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Если отмечено, цвет и прозрачность -будут взяты из разрезаемого объекта. -Работает только если эти свойства -у всех объектов одинаковы. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Авто - + + Transparency of cut face Прозрачность поверхности разреза - + + Transparency Прозрачность - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects - Refreshes the list of visible objects + Обновляет список видимых объектов - + Refresh view - Refresh view + Обновить вид - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Показывать разрез после закрытия - + Sliders are disabled for assemblies Sliders are disabled for assemblies @@ -5254,12 +5280,12 @@ Individual BOP Checks: Invalid curve on surface - Invalid curve on surface + Недопустимая кривая на поверхности Check for invalid curves on surfaces. Default: true - Check for invalid curves on surfaces. Default: true + Проверять на недопустимые кривые на поверхностях. По умолчанию: true @@ -5317,7 +5343,7 @@ Individual BOP Checks: Click on the faces in the 3D view to select them - Click on the faces in the 3D view to select them + Нажмите на грани в 3D просмотре, чтобы их выделить @@ -5327,7 +5353,7 @@ Individual BOP Checks: Resets color for all faces of the part - Resets color for all faces of the part + Сбрасывает цвета всех граней детали @@ -5338,8 +5364,7 @@ Individual BOP Checks: When checked, the you can select multiple faces by dragging a selection rectangle in the 3D view - When checked, the you can select multiple faces -by dragging a selection rectangle in the 3D view + Если отмечено, вы можете выбирать несколько граней, прямоугольным выделением в 3D-просмотре @@ -6099,7 +6124,7 @@ Do you want to continue? Create tube - Create tube + Создать трубу @@ -6170,12 +6195,12 @@ Do you want to continue? Create tube - Create tube + Создать трубу Creates a tube - Creates a tube + Добавляет полый цилиндр @@ -6183,12 +6208,12 @@ Do you want to continue? Computing the result failed with an error: - Computing the result failed with an error: + Вычисление результата завершилось ошибкой: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Нажмите 'Продолжить', чтобы все равно создать этот элемент, или 'Прервать' для отмены. @@ -6196,7 +6221,7 @@ Do you want to continue? Bad selection - Bad selection + Некорректное выделение @@ -6206,7 +6231,7 @@ Do you want to continue? Select at least two objects, or one or more compounds - Select at least two objects, or one or more compounds + Выберите по крайней мере два объекта или хотя бы одно объединение @@ -6224,12 +6249,12 @@ Do you want to continue? Connect objects - Connect objects + Соединить объекты Fuses objects, taking care to preserve voids. - Fuses objects, taking care to preserve voids. + Соединяет объекты, сохраняя пустоты. @@ -6237,7 +6262,7 @@ Do you want to continue? Embed object - Embed object + Встроить объект @@ -6265,14 +6290,14 @@ Do you want to continue? Computing the result failed with an error: - Computing the result failed with an error: + Вычисление результата завершилось ошибкой: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Нажмите 'Продолжить', чтобы все равно создать этот элемент, или 'Прервать' для отмены. @@ -6283,7 +6308,7 @@ Do you want to continue? Bad selection - Bad selection + Некорректное выделение @@ -6387,23 +6412,23 @@ for collision or distance filtering. First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. - First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. + Сначала выберите объединение. Если выбран второй объект, он будет использован как трафарет. Bad selection - Bad selection + Некорректное выделение Computing the result failed with an error: - Computing the result failed with an error: + Вычисление результата завершилось ошибкой: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Нажмите 'Продолжить', чтобы все равно создать этот элемент, или 'Прервать' для отмены. @@ -6411,24 +6436,24 @@ for collision or distance filtering. Explode compound - Explode compound + Разгруппировать объединение Split up a compound of shapes into separate objects. It will create a 'Compound Filter' for each shape. - Split up a compound of shapes into separate objects. -It will create a 'Compound Filter' for each shape. + Разделяет объединение фигур в отдельные объекты. +Это создаст 'Compound Filter' для каждой фигуры. First select a shape that is a compound. - First select a shape that is a compound. + Сначала выберите объединение. Bad selection - Bad selection + Некорректное выделение @@ -6436,7 +6461,7 @@ It will create a 'Compound Filter' for each shape. No object named {} - No object named {} + Отсутствует объект с именем {} diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.qm b/src/Mod/Part/Gui/Resources/translations/Part_sl.qm index 2083b9efd0..90c30bc67d 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index 3e3182b50a..48cb5a94e5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -1535,7 +1535,7 @@ na svoje X, Y in Z komponente. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Orodja za razdvajanje oblik in ustvarjanje telesij. @@ -4647,62 +4647,89 @@ sicer bo uporabljena normala očrtne ravnine + Color of cut face Barva prerezane ploskve + Color Barva + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Če je označno, bosta barva in prozornost -prevzeta po lastnostih rezanih predmetov. -Deluje le, če imajo vsi predmeti enake lastnosti. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Samodejno - + + Transparency of cut face Prozornost prerezne ploskve - + + Transparency Prozornost - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Osveži seznam vidnih predmetov - + Refresh view Osveži pogled - + When the dialog is closed, only created cuts will be visible Po zaprtju pogovornega okna bodo prikazane le prerezne ploskve - + Keep only cuts visible when closing Pri zaprtju pusti vidne le prereze - + Sliders are disabled for assemblies Drsniki so za sestave onemogočeni diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.qm b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.qm index 0f9215504c..dbf0464470 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts index 466db56cee..2a446dc29a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts @@ -4642,62 +4642,89 @@ the sketch plane's normal vector will be used + Color of cut face Boja preseka stranice + Color Boja + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Ako je čekirano, boja i providnost -biće preuzeti od isečenih objekata. -Radi samo ako su ove osobine kod svih objekata ista. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Automatski - + + Transparency of cut face Providnost preseka stranice - + + Transparency Providnost - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Osvežava listu vidljivih objekata - + Refresh view Osveži prikaz - + When the dialog is closed, only created cuts will be visible Kada se panel zatvori, u stablu dokumenta će biti vidljivi samo isečeni preseci - + Keep only cuts visible when closing Posle zatvaranja vidljivi samo isečeni preseci - + Sliders are disabled for assemblies Klizači su onemogućeni za sklopove diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.qm b/src/Mod/Part/Gui/Resources/translations/Part_sr.qm index 67acd7d1c0..cbea1b2019 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index 9b39684d59..6f53f0bd86 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -4642,62 +4642,89 @@ the sketch plane's normal vector will be used + Color of cut face Боја пресека странице + Color Боја + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - Ако је чекирано, боја и провидност -биће преузети од исечених објеката. -Ради само ако су ове особине код свих објеката иста. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Аутоматски - + + Transparency of cut face Провидност пресека странице - + + Transparency Провидност - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Освежава листу видљивих објеката - + Refresh view Освежите приказ - + When the dialog is closed, only created cuts will be visible Када се панел затвори, у стаблу документа ће бити видљиви само исечени пресеци - + Keep only cuts visible when closing После затварања видљиви само исечени пресеци - + Sliders are disabled for assemblies Клизачи су онемогућени за склопове diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm index d86a15ad22..aadc78b0fa 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 04f5af9a5d..935e30c68a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -4646,62 +4646,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Färg + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Automatisk - + + Transparency of cut face Transparency of cut face - + + Transparency Transparens - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.qm b/src/Mod/Part/Gui/Resources/translations/Part_tr.qm index 2c52186df7..04578c8767 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_tr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_tr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 8e35c9ac8d..5703c65a20 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -4631,62 +4631,89 @@ yoksa eskiz düzlemine dik vektör kullanılacak + Color of cut face Kesim yüzeyi rengi + Color Renk + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - İşaretlenirse, kesilen nesnelerden -renk ve saydamlık alınacaktır. Yalnızca -tüm nesneler aynı değerlere sahipse çalışır. +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto Otomatik - + + Transparency of cut face Kesim yüzeyi şeffaflığı - + + Transparency Şeffaflık - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Görünür nesnelerin listesini yeniler - + Refresh view Görünümü yenile - + When the dialog is closed, only created cuts will be visible İletişim kutusu kapatıldığında, yalnızca oluşturulan kesimler görünür - + Keep only cuts visible when closing Kapatırken yalnızca kesimleri görünür tutun - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm index 1607da12a9..d461cd5e38 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index 6c46248319..3afad3a3e1 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -4647,62 +4647,89 @@ the sketch plane's normal vector will be used + Color of cut face Колір обрізаної поверхні + Color Колір + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Автоматично - + + Transparency of cut face Прозорість розрізу обличчя - + + Transparency Прозорість - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Оновлює список видимих ​​об’єктів - + Refresh view Оновити перегляд - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Повзунки вимкнено для збірок diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm index f33b52463c..f6d15a6daa 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm and b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index b37da3efa5..74994bac97 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -4639,62 +4639,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Color + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Auto - + + Transparency of cut face Transparency of cut face - + + Transparency Transparència - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.qm b/src/Mod/Part/Gui/Resources/translations/Part_vi.qm index e8b22e66e1..714173e37d 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_vi.qm and b/src/Mod/Part/Gui/Resources/translations/Part_vi.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts index b0217315a1..d4d5347467 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts @@ -4647,62 +4647,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Màu + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Tự động - + + Transparency of cut face Transparency of cut face - + + Transparency Tính trong suốt - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm index 6bd701c8ea..09c859a08c 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm and b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index 251083dbb3..fa79827086 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -4642,61 +4642,89 @@ the sketch plane's normal vector will be used + Color of cut face 切割面颜色 + Color 颜色 + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. - 如果选中，颜色和透明度将与被切割的物体相同。 -仅当所有对象具有相同值时才有效。 +Works only properly if all objects +have the same values. + If checked, the color and transparency +will be taken from the cut objects. +Works only properly if all objects +have the same values. - + + Auto 自动 - + + Transparency of cut face 切割面的透明度 - + + Transparency 透明度 - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects 刷新可见对象列表 - + Refresh view 刷新视图 - + When the dialog is closed, only created cuts will be visible 当对话框关闭时， 只显示已创建的切割。 - + Keep only cuts visible when closing 关闭时只保留可见的切割 - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm index 33426813c9..5dd47de2c8 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm and b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 46119261f1..400dc5bd58 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -4646,62 +4646,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color 色彩 + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto 自動 - + + Transparency of cut face Transparency of cut face - + + Transparency 透明度 - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.qm index c69fde5adb..83f07869e9 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts index 7aa5e9bf45..88053f7f64 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts @@ -77,8 +77,7 @@ i.e. counter-clockwise when moving along its axis. If false, the tool will propose an initial value for the pitch based on the profile bounding box, so that self intersection is avoided. - Калі адключана, інструмент прапануе пачатковае значэнне кроку на аснове профілю абмежаванага прастакутніка, -каб пазбегнуць самаперакрыжавання. + Калі адключана, інструмент прапануе пачатковае значэнне кроку на аснове профілю габарытаў, каб пазбегнуць самаперакрыжавання. @@ -163,7 +162,7 @@ so that self intersection is avoided. Boolean operation - Аперацыя лагічнага значэння + Лагічная аперацыя @@ -632,7 +631,7 @@ so that self intersection is avoided. Create a sub-object(s) shape binder - Стварыць укладзены аб'ект(ы) злучнай фігуры + Стварыць укладзеныя аб'екты злучнай фігуры @@ -861,7 +860,7 @@ so that self intersection is avoided. Create Boolean - Стварыць лагічнае значэнне + Стварыць лагічную аперацыю @@ -925,7 +924,7 @@ so that self intersection is avoided. Invalid shape - Недапушчальная фігура + Хібная фігура @@ -945,7 +944,7 @@ so that self intersection is avoided. Base plane - Базавая плоскасць + Асноўная плоскасць @@ -1040,8 +1039,7 @@ so that self intersection is avoided. material to be removed; - the selected sketch does not belong to the active Body. Запытаны элемент не можа быць створаны. Прычынаю можа быць: -- бягучае Цела не ўтрымлівае базавай фігуры, таму няма -матэрыялу для выдалення; +- бягучае Цела не ўтрымлівае асноўнай фігуры, таму няма матэрыялу для выдалення; - абраны эскіз не належыць да бягучага Цела. @@ -1054,8 +1052,7 @@ so that self intersection is avoided. material to be removed; - the selected sketch does not belong to the active Body. Запытаны элемент не можа быць створаны. Прычынаю можа быць: -- бягучае Цела не ўтрымлівае базавай фігуры, таму няма -матэрыялу для выдалення; +- бягучае Цела не ўтрымлівае асноўнай фігуры, таму няма матэрыялу для выдалення; - абраны эскіз не належыць да бягучага Цела. @@ -1068,8 +1065,7 @@ so that self intersection is avoided. material to be removed; - the selected sketch does not belong to the active Body. Запытаны элемент не можа быць створаны. Прычынаю можа быць: -- бягучае Цела не ўтрымлівае базавай фігуры, таму няма -матэрыялу для выдалення; +- бягучае Цела не ўтрымлівае асноўнай фігуры, таму няма матэрыялу для выдалення; - абраны эскіз не належыць да бягучага Цела. @@ -1437,7 +1433,7 @@ If zero, it is equal to Radius2 Boolean parameters - Налады лагічнага значэння + Налады лагічнай аперацыі @@ -1467,7 +1463,7 @@ If zero, it is equal to Radius2 Invalid wedge parameters - Недапушчальныя налады кліну + Хібныя налады кліну @@ -1602,7 +1598,7 @@ click again to end selection Boolean: Accept: Input error - Лагічнае значэнне: Прыняць: Памылка ўводу + Лагічная аперацыя: Прыняць: Памылка ўводу @@ -1820,7 +1816,7 @@ click again to end selection Invalid shape - Недапушчальная фігура + Хібная фігура @@ -1850,7 +1846,7 @@ click again to end selection Base plane - Базавая плоскасць + Асноўная плоскасць @@ -1951,19 +1947,19 @@ click again to end selection Base X axis - Базавая вось X + Асноўная вось X Base Y axis - Базавая вось Y + Асноўная вось Y Base Z axis - Базавая вось Z + Асноўная вось Z @@ -2100,7 +2096,7 @@ click again to end selection None - None + Нічога @@ -2206,7 +2202,7 @@ click again to end selection Closed - Зачынены + Замкнуты @@ -2485,7 +2481,7 @@ from the model as reference Show direction - Адлюстраваць напрамак + Паказаць напрамак @@ -2929,19 +2925,19 @@ measured along the specified direction Base X axis - Базавая вось X + Асноўная вось X Base Y axis - Базавая вось Y + Асноўная вось Y Base Z axis - Базавая вось Z + Асноўная вось Z @@ -3201,17 +3197,17 @@ click again to end selection Base X axis - Базавая вось X + Асноўная вось X Base Y axis - Базавая вось Y + Асноўная вось Y Base Z axis - Базавая вось Z + Асноўная вось Z @@ -3222,17 +3218,17 @@ click again to end selection Base XY plane - Базавая плоскасць XY + Асноўная плоскасць XY Base YZ plane - Базавая плоскасць YZ + Асноўная плоскасць YZ Base XZ plane - Базавая плоскасць XZ + Асноўная плоскасць XZ @@ -3470,7 +3466,7 @@ click again to end selection Invalid selection - Недапушчальны выбар + Хібны выбар @@ -3578,7 +3574,7 @@ click again to end selection Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. - Разглядзіце магчымасць ужыць ЗлучокФормы ці БазавыЭлемент для спасылкі на вонкавую геаметрыю ў целе. + Разглядзіце магчымасць ужыць ЗлучокФормы ці АсноўныЭлемент для спасылкі на вонкавую геаметрыю ў целе. @@ -3670,7 +3666,7 @@ click again to end selection Bad base feature - Дрэнны базавы элемент + Дрэнны асноўны элемент @@ -3680,12 +3676,12 @@ click again to end selection %1 already belongs to a body, can't use it as base feature for another body. - %1 ужо належыць да цела, не можа ўжывацца ў якасці базавага элемент для іншага цела. + %1 ужо належыць да цела, не можа ўжывацца як асноўны элемент для іншага цела. Base feature (%1) belongs to other part. - Базавы элемент (%1) належыць да іншай дэталі. + Асноўны элемент (%1) належыць да іншай дэталі. @@ -3718,7 +3714,7 @@ This may lead to unexpected results. Base feature - Базавы элемент + Асноўны элемент @@ -3743,7 +3739,7 @@ This may lead to unexpected results. Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane. - Калі ласка, змяніце '%1' і перавызначыце яго, каб ужыць базавую ці апорную плоскасць у якасці плоскасці эскізу. + Калі ласка, змяніце '%1' і перавызначыце яго, каб ужыць асноўную ці апорную плоскасць у якасці плоскасці эскізу. @@ -3794,7 +3790,7 @@ This may lead to unexpected results. Impossible to move the base feature of a body. - Немагчыма рухаць базавы элемент цела. + Немагчыма рухаць асноўны элемент цела. @@ -3828,7 +3824,7 @@ This may lead to unexpected results. It is not possible to create a subtractive feature without a base feature available - Немагчыма стварыць элемент адымання без даступнага базавага элемента + Немагчыма стварыць элемент адымання без даступнага асноўнага элементу @@ -3908,7 +3904,7 @@ If you have a legacy document with PartDesign objects without Body, use the migr Edit boolean - Змяніць лагічнае значэнне + Змяніць лагічную аперацыю @@ -3947,7 +3943,7 @@ If you have a legacy document with PartDesign objects without Body, use the migr %1 misses a base feature. This feature is broken and can't be edited. - %1 не мае базавага элементу. + %1 не мае асноўнага элементу. Гэты элемент не працуе, і не можа быць зменены. @@ -4496,7 +4492,7 @@ Only available for holes without thread Class - Поле допуску + Поле дакладнасці @@ -4643,7 +4639,7 @@ over 90: larger hole radius at the bottom Loose - Свабодны (найбольшы допуск) + Свабодны (найбольшая дакладнасць) @@ -4724,7 +4720,7 @@ over 90: larger hole radius at the bottom Toggle 3D - Пераключыць трохмерны выгляд + Пераключыць трохмернае прадстаўленне diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm index 632eb26999..d623e69d1d 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts index 1440355e39..c32ba61fa9 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts @@ -3096,8 +3096,8 @@ clica altre cop per finalitzar la selecció - select an item to highlight it - double-click on an item to see the features - - seleccionar un element per ressaltar-ho -- fer doble clic en un element per veure les característiques + - Seleccioneu un element per ressaltar-ho +- Feu doble clic en un element per veure les característiques @@ -3444,22 +3444,22 @@ clica altre cop per finalitzar la selecció Select a feature from the list - Seleccioneu un element de la llista + Seleccioneu una característica de la llista Move tip - Mou punta + Mou la punta The moved feature appears after the currently set tip. - La característica moguda apareix després de la punta configurada en aquest moment. + La característica moguda apareix després de la punta establerta actualment. Do you want the last feature to be the new tip? - Vol que la darrera característica sigui la nova punta? + Voleu que la darrera característica sigui la nova punta? diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index c6c9ca4b59..230d366114 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index 9009c76614..c6298dab12 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -384,7 +384,7 @@ so that self intersection is avoided. Create a mirrored feature - Создать элемент отраженый относительно оси симметрии + Отразить элемент @@ -415,7 +415,7 @@ so that self intersection is avoided. Move object after other object - Поместить объект позади другого объекта + Изменить позицию в дереве @@ -523,12 +523,12 @@ so that self intersection is avoided. Pocket - Вырез + Карман Create a pocket with the selected sketch - Создать вырез на основе выбранного эскиза + Создать выемку на основе выбранного эскиза @@ -820,17 +820,17 @@ so that self intersection is avoided. Edit ShapeBinder - Edit ShapeBinder + Редактировать связующую форму Create ShapeBinder - Create ShapeBinder + Создать связующую форму Create SubShapeBinder - Create SubShapeBinder + Создать подобъектную связующую форму @@ -846,7 +846,7 @@ so that self intersection is avoided. Create a Sketch on Face - Create a Sketch on Face + Создать новый эскиз на грани @@ -856,12 +856,12 @@ so that self intersection is avoided. Convert to MultiTransform feature - Convert to MultiTransform feature + Преобразовать в элемент множественного преобразования Create Boolean - Create Boolean + Булева операция @@ -872,7 +872,7 @@ so that self intersection is avoided. Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Преобразовать устаревшие элементы проектирования деталей в тела @@ -882,17 +882,17 @@ so that self intersection is avoided. Duplicate a PartDesign object - Duplicate a PartDesign object + Дублировать объект PartDesign Move an object - Move an object + Переместить объект Move an object inside tree - Move an object inside tree + Переместить объект внутри дерева @@ -902,7 +902,7 @@ so that self intersection is avoided. Make LinearPattern - Make LinearPattern + Создать линейный массив @@ -1039,10 +1039,10 @@ so that self intersection is avoided. - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Запрошенный элемент не может быть создан. Причина может состоять в том, что: + - активное тело не содержит базовой формы, поэтому нет + материала для удаления; + - выбранный эскиз не принадлежит активному телу. @@ -1053,10 +1053,10 @@ so that self intersection is avoided. - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Запрошенный элемент не может быть создан. Причина может состоять в том, что: + - активное тело не содержит базовой формы, поэтому нет + материала для удаления; + - выбранный эскиз не принадлежит активному телу. @@ -1067,10 +1067,10 @@ so that self intersection is avoided. - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Запрошенный элемент не может быть создан. Причина может состоять в том, что: + - активное тело не содержит базовой формы, поэтому нет + материала для удаления; + - выбранный эскиз не принадлежит активному телу. @@ -1460,7 +1460,7 @@ If zero, it is equal to Radius2 The radii for cones must not be equal! - The radii for cones must not be equal! + Радиусы конуса не должны совпадать! @@ -1472,17 +1472,17 @@ If zero, it is equal to Radius2 X min must not be equal to X max! - X min must not be equal to X max! + X мин. не должен быть равен X макс.! Y min must not be equal to Y max! - Y min must not be equal to Y max! + Y мин. не должен быть равен Y макс.! Z min must not be equal to Z max! - Z min must not be equal to Z max! + Z мин. не должен быть равен Z макс.! @@ -1503,8 +1503,8 @@ If zero, it is equal to Radius2 Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Нажмите кнопку, чтобы войти в режим выделения, +нажмите еще раз для завершения выбора @@ -1574,7 +1574,7 @@ click again to end selection There must be at least one item - There must be at least one item + Должен быть хотя бы один элемент @@ -1647,8 +1647,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Нажмите кнопку, чтобы войти в режим выделения, +нажмите еще раз для завершения выбора @@ -1693,7 +1693,7 @@ click again to end selection There must be at least one item - There must be at least one item + Должен быть хотя бы один элемент @@ -1711,7 +1711,7 @@ click again to end selection Add all edges - Add all edges + Добавить все рёбра @@ -1727,7 +1727,7 @@ click again to end selection There must be at least one item - There must be at least one item + Должен быть хотя бы один элемент @@ -1767,7 +1767,7 @@ click again to end selection Click on a face in the model - Click on a face in the model + Выберите грань внутри модели @@ -1876,8 +1876,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Нажмите кнопку, чтобы войти в режим выделения, +нажмите еще раз для завершения выбора @@ -1912,7 +1912,7 @@ click again to end selection There must be at least one item - There must be at least one item + Должен быть хотя бы один элемент @@ -2037,7 +2037,7 @@ click again to end selection Radial growth: - Radial growth: + Радиальный рост: @@ -2072,7 +2072,7 @@ click again to end selection Error: unsupported mode - Error: unsupported mode + Ошибка: неподдерживаемый режим @@ -2090,7 +2090,7 @@ click again to end selection Counterdrill - Counterdrill + Зенковка с цилиндрическим хвостовиком @@ -2148,7 +2148,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Список может быть переупорядочен перетаскиванием @@ -2231,7 +2231,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Список может быть переупорядочен перетаскиванием @@ -2269,7 +2269,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Список может быть переупорядочен перетаскиванием @@ -2317,7 +2317,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Список может быть переупорядочен перетаскиванием @@ -2390,7 +2390,7 @@ click again to end selection Offset from face at which pad will end - Offset from face at which pad will end + Смещение от конечной грани @@ -2464,8 +2464,7 @@ click again to end selection Set a direction or select an edge from the model as reference - Set a direction or select an edge -from the model as reference + Задайте направление или выберите ребро модели @@ -2491,8 +2490,8 @@ from the model as reference Use custom vector for pad direction, otherwise the sketch plane's normal vector will be used - Use custom vector for pad direction, otherwise -the sketch plane's normal vector will be used + Укажите пользовательский вектор для направления кармана, +в противном случае будет использована нормаль эскиза @@ -2502,7 +2501,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + абсцисса вектора направления @@ -2512,7 +2511,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + ордината вектора направления @@ -2522,14 +2521,13 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + аппликата вектора направления If unchecked, the length will be measured along the specified direction - If unchecked, the length will be -measured along the specified direction + Если флажок не установлен, длина будет измеряться вдоль заданного направления @@ -2539,7 +2537,7 @@ measured along the specified direction Applies length symmetrically to sketch plane - Applies length symmetrically to sketch plane + Применяет длину симметрично плоскости эскиза @@ -2560,7 +2558,7 @@ measured along the specified direction Taper angle - Уклон выреза + Угол сужения @@ -2570,12 +2568,12 @@ measured along the specified direction 2nd taper angle - 2nd taper angle + Второй угол сужения Select face - Select face + Выбрать грань @@ -2786,7 +2784,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + Список может быть переупорядочен перетаскиванием @@ -2809,12 +2807,12 @@ measured along the specified direction Offset from face at which pocket will end - Offset from face at which pocket will end + Смещение от конечной грани Reverses pocket direction - Reverses pocket direction + Переворачивает направление кармана @@ -2862,7 +2860,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + Список может быть переупорядочен перетаскиванием @@ -3082,8 +3080,8 @@ measured along the specified direction Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Нажмите кнопку, чтобы войти в режим выделения, +нажмите еще раз для завершения выбора @@ -3154,7 +3152,7 @@ click again to end selection There must be at least one item - There must be at least one item + Должен быть хотя бы один элемент @@ -3295,7 +3293,7 @@ click again to end selection LinearPattern parameters - LinearPattern parameters + Параметры линейного массива @@ -3303,7 +3301,7 @@ click again to end selection MultiTransform parameters - MultiTransform parameters + Параметры множественного преобразования @@ -3311,7 +3309,7 @@ click again to end selection PolarPattern parameters - PolarPattern parameters + Параметры кругового массива @@ -3573,7 +3571,7 @@ click again to end selection Cannot use selected object. Selected object must belong to the active body - Cannot use selected object. Selected object must belong to the active body + Невозможно использовать выбранный объект. Выбранный объект должен принадлежать активному телу @@ -3601,7 +3599,7 @@ click again to end selection Select an edge, face, or body. - Select an edge, face, or body. + Выберите ребро, грань или тело. @@ -3652,7 +3650,7 @@ click again to end selection Please select only one feature in an active body. - Please select only one feature in an active body. + Пожалуйста, выберите только один элемент в активном теле. @@ -3789,7 +3787,7 @@ This may lead to unexpected results. There are no other bodies to move to - Нет других тел для перемещение к + Других тел нет @@ -3809,14 +3807,14 @@ This may lead to unexpected results. Dependency violation - Dependency violation + Нарушение зависимостей Early feature must not depend on later feature. - Early feature must not depend on later feature. + Ранний элемент не может зависеть от более позднего. @@ -3997,7 +3995,7 @@ This feature is broken and can't be edited. Synchronize - Synchronize + Синхронизировать @@ -4396,7 +4394,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Whether the hole gets a thread - Whether the hole gets a thread + Включите для добавления резьбы @@ -4433,7 +4431,7 @@ Note that the calculation can take some time Custom Thread - Custom Thread + Пользовательская резьба @@ -4500,7 +4498,7 @@ Only available for holes without thread Tolerance class for threaded holes according to hole profile - Tolerance class for threaded holes according to hole profile + Класс допуска для резьбовых отверстий в соответствии профилю отверстия @@ -4559,7 +4557,7 @@ Only available for holes without thread Cut type for screw heads - Cut type for screw heads + Вид гнезда под шляпку diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.qm index 573ccc3e0e..24a02db97c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts index 2fb6f3b7ab..e21008a47c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts @@ -199,7 +199,7 @@ so that self intersection is avoided. Chamfer - Obori ivice + Obaranje ivica @@ -235,7 +235,7 @@ so that self intersection is avoided. Draft - Crtež + Zakošenje diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm index 2d5be6fe39..fdf18e119f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts index 452bc35a50..772ca1b359 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -199,7 +199,7 @@ so that self intersection is avoided. Chamfer - Обори ивице + Обaрање ивица @@ -235,7 +235,7 @@ so that self intersection is avoided. Draft - Цртеж + Закошење diff --git a/src/Mod/Path/Gui/Resources/translations/Path_be.qm b/src/Mod/Path/Gui/Resources/translations/Path_be.qm index d26997be9e..e3cce389b1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_be.qm and b/src/Mod/Path/Gui/Resources/translations/Path_be.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_be.ts b/src/Mod/Path/Gui/Resources/translations/Path_be.ts index 71ee0a6af0..7e5f18b414 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_be.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_be.ts @@ -594,12 +594,12 @@ <html><head/><body><p>Extension of BoundBox's MinX.</p></body></html> - <html><head/><body><p>Пашырэнне рамкі абмежавання межы НайменшX.</p></body></html> + <html><head/><body><p>Пашырэнне габарытаў НайменшX.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxX.</p></body></html> - <html><head/><body><p>Пашырэнне рамкі абмежавання межы НайбольшX.</p></body></html> + <html><head/><body><p>Пашырэнне габарытаў НайбольшX.</p></body></html> @@ -609,12 +609,12 @@ <html><head/><body><p>Extension of BoundBox's MinY.</p></body></html> - <html><head/><body><p>Пашырэнне рамкі абмежавання межы НайменшY.</p></body></html> + <html><head/><body><p>Пашырэнне габарытаў НайменшY.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxY.</p></body></html> - <html><head/><body><p>Пашырэнне рамкі абмежавання межы НайбольшY.</p></body></html> + <html><head/><body><p>Пашырэнне габарытаў НайбольшY.</p></body></html> @@ -624,12 +624,12 @@ <html><head/><body><p>Extension of BoundBox's MinZ.</p></body></html> - <html><head/><body><p>Пашырэнне рамкі абмежавання межы НайменшZ.</p></body></html> + <html><head/><body><p>Пашырэнне габарытаў НайменшZ.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxZ.</p></body></html> - <html><head/><body><p>Пашырэнне рамкі абмежавання межы НайбольшZ.</p></body></html> + <html><head/><body><p>Пашырэнне габарытаў НайбольшZ.</p></body></html> @@ -695,7 +695,7 @@ Import - Import + Імпарт @@ -869,7 +869,7 @@ <html><head/><body><p>The depth in Z-axis the operation moves downwards between layers.</p><p>This value depends on the tool being used, the material to be cut, available cooling and many other factors. Please consult the tool manufacturers data sheets for the proper value.</p></body></html> - <html><head/><body><p>Глыбіня па восі Z аперацыя руху ўніз паміж пластамі.</p><p>Гэтае значэнне залежыць ад ужытага інструмента, матэрыялу, які падлягае рэзанню, даступнага астуджэння і многіх іншых фактараў. Калі ласка, звярніцеся да тэхнічных пашпартоў вытворцаў інструментаў для атрымання правільнага значэння.</p></body></html> + <html><head/><body><p>Глыбіня па восі Z аперацыя руху ўніз паміж пластамі.</p><p>Гэтае значэнне залежыць ад ужытага інструмента, матэрыялу, які падлягае апрацоўцы, даступнага астуджэння і многіх іншых фактараў. Калі ласка, звярніцеся да тэхнічных пашпартоў вытворцаў інструментаў для атрымання правільнага значэння.</p></body></html> @@ -879,7 +879,7 @@ <html><head/><body><p>Depth of the final cut of the operation. Can be used to produce a cleaner finish.</p></body></html> - <html><head/><body><p>Глыбіня канчатковага разрэзу аперацыі. Можа ўжывацца для атрымання больш чыстага пакрыцця.</p></body></html> + <html><head/><body><p>Глыбіня канчатковай аперацыі апрацоўкі. Можа ўжывацца для атрымання больш чыстага пакрыцця.</p></body></html> @@ -989,12 +989,12 @@ Cut Region - Вобласць разрэзу + Вобласць апрацоўкі <html><head/><body><p>Cut inside or outside of the selected shapes</p></body></html> - <html><head/><body><p>Выразае ўнутры ці звонку выбраных фігур.</p></body></html> + <html><head/><body><p>Апрацоўвае ўнутры ці звонку выбраных фігур.</p></body></html> @@ -1222,7 +1222,7 @@ None - None + Нічога @@ -1282,7 +1282,7 @@ <html><head/><body><p>Specify the percent of the tool diameter each helix will be offset to the previous one.</p><p><br/></p><p>A step over of 100% means no overlap of the individual cuts.</p></body></html> - <html><head/><body><p>Пакажыце адсотак дыяметра інструмента, пры якім кожная спіраль будзе зрушаная адносна папярэдняй.</p><p><br/></p><p>Крок, які перавышае 100%, азначае адсутнасць перакрыцця асобных разрэзаў.</p></body></html> + <html><head/><body><p>Пакажыце адсотак дыяметра інструмента, пры якім кожная спіраль будзе зрушаная адносна папярэдняй.</p><p><br/></p><p>Крок, які перавышае 100%, азначае адсутнасць перакрыцця асобнай апрацоўкі.</p></body></html> @@ -1363,17 +1363,17 @@ <html><head/><body><p>Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off.</p><p>The latter can be used to face of the entire stock area to ensure uniform heights for the following operations.</p></body></html> - <html><head/><body><p>Пакажыце, ці павінна абліцоўка абмяжоўвацца фактычнай фігурай абранай грані (ці дэталі, калі грань не абраная), альбо калі абмежаваны прастакутнік павінен быць звернутым у бок.</p><p>Апошняе можна ўжываць для абліцоўкі ўсёй вобласці нарыхтоўкі, каб забяспечыць раўнамерную вышыню для наступных аперацый.</p></body></html> + <html><head/><body><p>Пакажыце, ці павінна абліцоўка абмяжоўвацца фактычнай фігурай абранай грані (ці дэталі, калі грань не абраная), альбо калі габарыты павінны быць звернутымі ў бок.</p><p>Апошняе можна ўжываць для абліцоўкі ўсёй вобласці нарыхтоўкі, каб забяспечыць раўнамерную вышыню для наступных аперацый.</p></body></html> Cut Mode - Рэжым выразання + Рэжым апрацоўкі <html><head/><body><p>The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on.</p><p>Keeping that in mind climb mode is called when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bits rotation and the tools lateral movement are in the same direction.</p></body></html> - <html><head/><body><p>Рэжым выразання мяркуе, што разрэз на адным баку такарным разцом уяўляе сабой атрыманую дэталь, а другі бок альбо ўжо адздрабнены, альбо будзе выдалены пазней.</p><p>Маючы гэтае на ўвазе, рэжым уздыму выклікаецца, калі такарны разец рухаецца ў разрэз пры кожным вярчэнні, тады як у звычайным рэжыме вярчэнне такарнага разца і бакавы рух інструмента адбываюцца ў адным напрамку.</p></body></html> + <html><head/><body><p>Рэжым апрацоўкі мяркуе, што апрацоўкі на адным баку такарным разцом уяўляе сабой атрыманую дэталь, а другі бок альбо ўжо адздрабнены, альбо будзе выдалены пазней.</p><p>Маючы гэтае на ўвазе, рэжым уздыму выклікаецца, калі такарны разец рухаецца ў разрэз пры кожным вярчэнні, тады як у звычайным рэжыме вярчэнне такарнага разца і бакавы рух інструмента адбываюцца ў адным напрамку.</p></body></html> @@ -1418,7 +1418,7 @@ Grid - Grid + Сетка @@ -1532,7 +1532,7 @@ Cut Side - Выразаць бок + Апрацаваць бок @@ -1553,7 +1553,7 @@ <html><head/><body><p>Check if this profile operation should also process holes in the base geometry.</p><p><br/></p><p>Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters.</p><p><br/></p><p>Note that this does not include cylindrical holes, the assumption being that they will get drilled.</p></body></html> - <html><head/><body><p>Праверце, ці павінна гэтая аперацыя прафілявання таксама апрацоўваць адтуліны ў базавай геаметрыі.</p><p><br/></p><p>Знойдзеныя адтуліны аўтаматычна ссоўваюцца на супрацьлеглы бок разрэзу, і выконваецца ў супрацьлеглым напрамку ад перыметраў.</p><p><br/></p><p>Звярніце ўвагу, што гэта не ўключае круглыя адтуліны, бо мяркуецца, што яны будуць прасвідраваныя.</p></body></html> + <html><head/><body><p>Правярае, ці павінна гэтая аперацыя прафілявання таксама апрацоўваць адтуліны ў базавай геаметрыі.</p><p><br/></p><p>Знойдзеныя адтуліны аўтаматычна ссоўваюцца на супрацьлеглы бок апрацоўкі, і выконваецца ў супрацьлеглым напрамку ад перыметраў.</p><p><br/></p><p>Звярніце ўвагу, што гэта не ўключае круглыя адтуліны, бо мяркуецца, што яны будуць прасвідраваныя.</p></body></html> @@ -1563,7 +1563,7 @@ <html><head/><body><p>If checked the profile operation is offset by the tool radius. The offset direction is determined by the Cut Side.</p></body></html> - <html><head/><body><p>Калі птушка, аперацыя прафілявання ссоўваецца на радыус інструмента. Напрамак зрушэння вызначаецца бокам зрэзу.</p></body></html> + <html><head/><body><p>Калі птушка, аперацыя прафілявання ссоўваецца на радыус інструмента. Напрамак зрушэння вызначаецца бокам апрацоўкі.</p></body></html> @@ -1573,7 +1573,7 @@ <html><head/><body><p>Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled.</p><p><br/></p><p>This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change.</p><p><br/></p><p>Note that the cut side and direction is reversed in respect to the specified values.</p></body></html> - <html><head/><body><p>Абярыце, калі вы жадаеце, каб гэтая аперацыя прафілявання прымянялася таксама да круглых адтулін, якія звычайна прасвідроўваюцца.</p><p><br/></p><p>Гэтае можа быць карысна, калі няма даступнага свердзела падыходнага дыяметру, альбо колькасць адтулін не апраўдвае неабходнасць замены інструмента.</p><p><br/></p><p>Звярніце ўвагу, што бок і напрамак рэзання зваротныя адносна паказаных значэнняў.</p></body></html> + <html><head/><body><p>Абярыце, калі вы жадаеце, каб гэтая аперацыя прафілявання прымянялася таксама да круглых адтулін, якія звычайна прасвідроўваюцца.</p><p><br/></p><p>Гэтае можа быць карысна, калі няма даступнага свердзела падыходнага дыяметру, альбо колькасць адтулін не апраўдвае неабходнасць замены інструмента.</p><p><br/></p><p>Звярніце ўвагу, што бок і напрамак апрацоўкі зваротны адносна паказаных значэнняў.</p></body></html> @@ -1610,7 +1610,7 @@ Center of BoundBox - Цэнтр мяжы + Цэнтр габарытаў @@ -1688,26 +1688,26 @@ <html><head/><body><p>Positive extends the end of the path, negative shortens.</p></body></html> - <html><head/><body><p>Positive extends the end of the path, negative shortens.</p></body></html> + <html><head/><body><p>Станоўчае значэнне - выцягвае канец шляху, адмоўнае - скарачае.</p></body></html> Layer Mode - Layer Mode + Рэжым пластоў <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> - <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> + <html><head/><body><p>Завершае аперацыю за адзін праход на глыбіню, альбо за некалькі праходаў да канчатковай глыбіні.</p></body></html> Single-pass - Single-pass + Адзін праход @@ -1717,17 +1717,17 @@ Path Orientation - Path Orientation + Арыентацыя шляху <html><head/><body><p>Choose the path orientation with regard to the feature(s) selected.</p></body></html> - <html><head/><body><p>Абярыце арыентацыю шляху ў адпаведнасці з абранымі магчымасцямі(ю).</p></body></html> + <html><head/><body><p>Абірае арыентацыю шляху ў адпаведнасці з абранымі магчымасцямі(ю).</p></body></html> Start to End - Start to End + Пачаць з канца @@ -1737,102 +1737,102 @@ <html><head/><body><p>Enable to reverse the cut direction of the slot path.</p></body></html> - <html><head/><body><p>Enable to reverse the cut direction of the slot path.</p></body></html> + <html><head/><body><p>Уключыце, каб змяніць напрамак апрацоўкі ў зваротным напрамку.</p></body></html> Reverse cut direction - Reverse cut direction + Адваротны напрамак апрацоўкі BoundBox - BoundBox + Габарыты <html><head/><body><p>Select the overall boundary for the operation.</p></body></html> - <html><head/><body><p>Select the overall boundary for the operation.</p></body></html> + <html><head/><body><p>Абірае агульныя габарыты для аперацыі.</p></body></html> Scan Type - Scan Type + Тып сканавання <html><head/><body><p>Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan.</p></body></html> - <html><head/><body><p>Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan.</p></body></html> + <html><head/><body><p>Плоскі: плоскае трохмернае сканаванне паверхні. Вярчальны: вярчальнае сканаванне па чацвёртай восі.</p></body></html> Cut Pattern - Cut Pattern + Шаблон апрацоўкі <html><head/><body><p>Set the geometric clearing pattern to use for the operation.</p></body></html> - <html><head/><body><p>Set the geometric clearing pattern to use for the operation.</p></body></html> + <html><head/><body><p>Задайце геаметрычны шаблон ачысткі, які будзе ўжывацца для аперацыі.</p></body></html> Profile Edges - Profile Edges + Прафіляваць рабро <html><head/><body><p>Profile the edges of the selection.</p></body></html> - <html><head/><body><p>Profile the edges of the selection.</p></body></html> + <html><head/><body><p>Прафіляваць рэбры абранага.</p></body></html> Avoid Last X Faces - Avoid Last X Faces + Пазбягайце апошніх X граняў <html><head/><body><p>Avoid cutting the last 'N' faces in the Base Geometry list of selected faces.</p></body></html> - <html><head/><body><p>Avoid cutting the last 'N' faces in the Base Geometry list of selected faces.</p></body></html> + <html><head/><body><p>Пазбягае апрацоўкі апошніх 'N' граняў у спісе абраных граняў базавай геаметрыі.</p></body></html> BoundBox extra offset X, Y - BoundBox extra offset X, Y + Дадатковае зрушэнне габарытаў X, Y <html><head/><body><p>Additional offset to the selected bounding box along the X axis."</p></body></html> - <html><head/><body><p>Additional offset to the selected bounding box along the X axis."</p></body></html> + <html><head/><body><p>Дадатковае зрушэнне да абраных габарытаў наўздоўж восі X.</p></body></html> <html><head/><body><p>Additional offset to the selected bounding box along the Y axis."</p></body></html> - <html><head/><body><p>Additional offset to the selected bounding box along the Y axis."</p></body></html> + <html><head/><body><p>Дадатковае зрушэнне да абраных габарытаў наўздоўж восі Y.</p></body></html> Drop Cutter Direction - Drop Cutter Direction + Напрамак апрацоўкі разцом <html><head/><body><p>Dropcutter lines are created parallel to this axis.</p></body></html> - <html><head/><body><p>Dropcutter lines are created parallel to this axis.</p></body></html> + <html><head/><body><p>Лініі фрэзеравання ствараюцца паралельна гэтай восі.</p></body></html> Depth offset - Depth offset + Зрушэнне глыбіні <html><head/><body><p>Set the Z-axis depth offset from the target surface.</p></body></html> - <html><head/><body><p>Set the Z-axis depth offset from the target surface.</p></body></html> + <html><head/><body><p>Задайце зрушэнне глыбіні па восі Z ад мэтавай паверхні.</p></body></html> @@ -1844,85 +1844,85 @@ Sample interval - Sample interval + Інтэрвал выбаркі <html><head/><body><p>Set the sampling resolution. Smaller values quickly increase processing time.</p></body></html> - <html><head/><body><p>Set the sampling resolution. Smaller values quickly increase processing time.</p></body></html> + <html><head/><body><p>Задайце дазвол выбаркі. Меншыя значэння хутка павялічваюць час апрацоўкі.</p></body></html> <html><head/><body><p>Make True, if specifying a Start Point</p></body></html> - <html><head/><body><p>Make True, if specifying a Start Point</p></body></html> + <html><head/><body><p>Птушка, калі вы пакажыце пачатковую кропку</p></body></html> <html><head/><body><p>Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output.</p></body></html> - <html><head/><body><p>Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output.</p></body></html> + <html><head/><body><p>Уключыце аптымізацыю лінейных шляхоў (калінеарных кропак). Выдаляе непатрэбныя калінеарныя кропкі з вываду G-кода.</p></body></html> Optimize Linear Paths - Optimize Linear Paths + Аптымізаваць лінейныя шляхі <html><head/><body><p>If true, the cutter will remain inside the boundaries of the model or selected face(s)</p></body></html> - <html><head/><body><p>If true, the cutter will remain inside the boundaries of the model or selected face(s)</p></body></html> + <html><head/><body><p>Калі птушка, разец застанецца ўнутры межаў мадэлі ці выбранай грані(яў)</p></body></html> Boundary Enforcement - Boundary Enforcement + Забеспячэнне захавання габарытаў <html><head/><body><p>Enable separate optimization of transitions between, and breaks within, each step over path.</p></body></html> - <html><head/><body><p>Enable separate optimization of transitions between, and breaks within, each step over path.</p></body></html> + <html><head/><body><p>Уключыце асобную аптымізацыю пераходаў паміж кожным крокам па шляху і пераходаў унутры яго.</p></body></html> Optimize StepOver Transitions - Optimize StepOver Transitions + Аптымізаваць пакрокавых пераходаў Setup Global - Setup Global + Налады глабальных Depths - Depths + Глыбіні <html><head/><body><p>Expression set as the StartDepth of a newly created operation.</p><p><br/></p><p>Default: OpStartDepth</p></body></html> - <html><head/><body><p>Expression set as the StartDepth of a newly created operation.</p><p><br/></p><p>Default: OpStartDepth</p></body></html> + <html><head/><body><p>Выраз, які зададзены як пачатковая глыбіні зноў створанай аперацыі.</p><p><br/></p><p>Першапачаткова: OpStartDepth</p></body></html> <html><head/><body><p>Expression set as the FinalDepth for a newly created operation.</p><p><br/></p><p>Default: OpFinalDepth</p></body></html> - <html><head/><body><p>Expression set as the FinalDepth for a newly created operation.</p><p><br/></p><p>Default: OpFinalDepth</p></body></html> + <html><head/><body><p>Выраз, які зададзены як канчатковая глыбіня зноў створанай аперацыі.</p><p><br/></p><p>Першапачаткова: OpFinalDepth</p></body></html> <html><head/><body><p>Expression set as the StepDown of a newly created operation.</p><p><br/></p><p>Default: OpToolDiameter</p></body></html> - <html><head/><body><p>Expression set as the StepDown of a newly created operation.</p><p><br/></p><p>Default: OpToolDiameter</p></body></html> + <html><head/><body><p>Выраз, які зададзены як крок уніз зноў створанай аперацыі.</p><p><br/></p><p>Першапачаткова: OpToolDiameter</p></body></html> Heights - Heights + Вышыні Expression - Expression + Выраз @@ -1937,32 +1937,32 @@ <html><head/><body><p>Expression set as ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffset&quot;</p></body></html> - <html><head/><body><p>Expression set as ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffset&quot;</p></body></html> + <html><head/><body><p>Выраз, які зададзены як вышыня зазору для новай аперацыі.</p><p><br/></p><p>Першапачаткова: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffsetOpFinalDepth&quot;</p></body></html> <html><head/><body><p>ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;3 mm&quot;</p></body></html> - <html><head/><body><p>ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;3 mm&quot;</p></body></html> + <html><head/><body><p>ClearanceHeightOffset - можа ўжывацца ў выразах для ўстаноўкі першапачатковай вышыні зазору для новых аперацый.</p><p><br/></p><p>Першапачаткова: &quot;3 мм&quot;</p></body></html> Safe - Safe + Бяспечна <html><head/><body><p>Expression set as SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> - <html><head/><body><p>Expression set as SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> + <html><head/><body><p>Выраз, які зададзеная як бяспечная вышыня для новай аперацыі.</p><p><br/></p><p>Першапачаткова: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> <html><head/><body><p>SafeHeightOffset can be for expressions to set the SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;5 mm&quot;</p></body></html> - <html><head/><body><p>SafeHeightOffset can be for expressions to set the SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;5 mm&quot;</p></body></html> + <html><head/><body><p>SafeHeightOffset - можа ўжывацца ў выразах для ўстаноўкі бяспечнай вышыні для новых аперацый.</p><p><br/></p><p>Першапачаткова: &quot;5 мм&quot;</p></body></html> Rapid Speeds - Rapid Speeds + Хуткія падачы @@ -1972,7 +1972,7 @@ <html><head/><body><p>Rapid horizontal speed assigned as HorizRapid to new ToolController.</p></body></html> - <html><head/><body><p>Rapid horizontal speed assigned as HorizRapid to new ToolController.</p></body></html> + <html><head/><body><p>Хуткая гарызантальная падача, якая прысвоеная як гарызантальная падача да новага Кантролера інструменту.</p></body></html> @@ -1982,7 +1982,7 @@ <html><head/><body><p>Rapid vertical speed assigned to VertRapid of new ToolController.</p></body></html> - <html><head/><body><p>Rapid vertical speed assigned to VertRapid of new ToolController.</p></body></html> + <html><head/><body><p>Хуткая вертыкальная падача, якая прысвоеная як вертыкальная падача да новага Кантролера інструменту.</p></body></html> @@ -2075,7 +2075,7 @@ <html><head/><body><p>Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based).</p></body></html> - <html><head/><body><p>Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based).</p></body></html> + <html><head/><body><p>Абярыце алгарытм для ўжывання: Фрэзераванне* OCL ці Эксперыментальны (які не заснаваны на OCL).</p></body></html> @@ -2166,7 +2166,7 @@ Cutting Edge Height - Cutting Edge Height + Вышыня рэжучага рабра @@ -2505,7 +2505,7 @@ None - None + Нічога @@ -2583,12 +2583,12 @@ Bounding Box Normal Color - Bounding Box Normal Color + Звычайны колер габарытаў Bounding Box Selection Color - Bounding Box Selection Color + Колер абраных габарытаў @@ -2603,7 +2603,7 @@ Default path shape selection behavior in 3D viewer - Default path shape selection behavior in 3D viewer + Першапачатковыя паводзіны пры выбары шляху фігуры ў акне трохмернага прадстаўлення @@ -2613,12 +2613,12 @@ Bounding Box - Bounding Box + Габарыты None - None + Нічога @@ -2679,7 +2679,7 @@ Suppress warning whenever a Path selection mode is activated - Suppress warning whenever a Path selection mode is activated + Прыбраць паведамленне папярэджання, калі ўключаны рэжым выбару шляху @@ -2704,12 +2704,12 @@ p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:12pt; font-weight:400; font-style:normal;"> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans'; font-size:16pt;">If openCAMlib is installed with its python interface it can be used by some additional 3d operations.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans'; font-size:16pt;">Changing this value requires a restart of FreeCAD to take effect.</span></p></body></html> - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:12pt; font-weight:400; font-style:normal;"> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans'; font-size:16pt;">If openCAMlib is installed with its python interface it can be used by some additional 3d operations.</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans'; font-size:16pt;">Changing this value requires a restart of FreeCAD to take effect.</span></p></body></html> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans'; font-size:10pt;">Калі openCAMlib усталяваны з яго інтэрфейсам Python, то яго можна ўжываць для некаторых дадатковых трохмерных аперацый.</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans'; font-size:10pt;">Змена гэтага значэння патрабуе перазапуску FreeCAD, каб змены ўступілі ў сілу.</span></p></body></html> @@ -2836,7 +2836,7 @@ p, li { white-space: pre-wrap; } AxisMap Dressup - AxisMap Dressup + Аздабленне восей @@ -2847,47 +2847,47 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>The radius of the wrapped axis</p></body></html> - <html><head/><body><p>The radius of the wrapped axis</p></body></html> + <html><head/><body><p>Радыус абгорнутай восі</p></body></html> Axis Mapping - Axis Mapping + Супастаўленне восей <html><head/><body><p>The input mapping axis. Coordinates of the first axis will be mapped to the second.</p></body></html> - <html><head/><body><p>The input mapping axis. Coordinates of the first axis will be mapped to the second.</p></body></html> + <html><head/><body><p>Уваходная супастаўленая вось. Каардынаты першай восі будуць супастаўленыя з другой.</p></body></html> X->A - X->A + X->A Y->A - Y->A + Y->A X->B - X->B + X->B Y->B - Y->B + Y->B X->C - X->C + X->C Y->C - Y->C + Y->C @@ -3114,7 +3114,7 @@ p, li { white-space: pre-wrap; } Base Geometry - Базавая геаметрыя + Асноўная геаметрыя @@ -3159,7 +3159,7 @@ p, li { white-space: pre-wrap; } Depths - Depths + Глыбіні @@ -3184,7 +3184,7 @@ p, li { white-space: pre-wrap; } Heights - Heights + Вышыні @@ -3224,7 +3224,7 @@ p, li { white-space: pre-wrap; } OCL Dropcutter - OCL Dropcutter + Фрэзераванне OCL @@ -3273,7 +3273,7 @@ p, li { white-space: pre-wrap; } Activate / resume simulation - Activate / resume simulation + Задзейнічаць / аднавіць мадэляванне @@ -3416,7 +3416,7 @@ p, li { white-space: pre-wrap; } Cutting Edge Height - Cutting Edge Height + Вышыня рэжучага рабра @@ -3720,7 +3720,7 @@ p, li { white-space: pre-wrap; } Link Stock and Model - Link Stock and Model + Звязаць прыпуск і мадэль @@ -3746,7 +3746,7 @@ p, li { white-space: pre-wrap; } Depths - Depths + Глыбіні @@ -3756,7 +3756,7 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>Expression set as the StartDepth of a newly created operation.</p><p><br/></p><p>Default: OpStartDepth</p></body></html> - <html><head/><body><p>Expression set as the StartDepth of a newly created operation.</p><p><br/></p><p>Default: OpStartDepth</p></body></html> + <html><head/><body><p>Выраз, які зададзены як пачатковая глыбіні зноў створанай аперацыі.</p><p><br/></p><p>Першапачаткова: OpStartDepth</p></body></html> @@ -3766,7 +3766,7 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>Expression set as the FinalDepth for a newly created operation.</p><p><br/></p><p>Default: OpFinalDepth</p></body></html> - <html><head/><body><p>Expression set as the FinalDepth for a newly created operation.</p><p><br/></p><p>Default: OpFinalDepth</p></body></html> + <html><head/><body><p>Выраз, які зададзены як канчатковая глыбіня зноў створанай аперацыі.</p><p><br/></p><p>Першапачаткова: OpFinalDepth</p></body></html> @@ -3776,17 +3776,17 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>Expression set as the StepDown of a newly created operation.</p><p><br/></p><p>Default: OpToolDiameter</p></body></html> - <html><head/><body><p>Expression set as the StepDown of a newly created operation.</p><p><br/></p><p>Default: OpToolDiameter</p></body></html> + <html><head/><body><p>Выраз, які зададзены як крок уніз зноў створанай аперацыі.</p><p><br/></p><p>Першапачаткова: OpToolDiameter</p></body></html> Heights - Heights + Вышыні Expression - Expression + Выраз @@ -3801,27 +3801,27 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>Expression set as ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffset&quot;</p></body></html> - <html><head/><body><p>Expression set as ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffset&quot;</p></body></html> + <html><head/><body><p>Выраз, які зададзены як вышыня зазору для новай аперацыі.</p><p><br/></p><p>Першапачаткова: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffsetOpFinalDepth&quot;</p></body></html> <html><head/><body><p>ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;3 mm&quot;</p></body></html> - <html><head/><body><p>ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;3 mm&quot;</p></body></html> + <html><head/><body><p>ClearanceHeightOffset - можа ўжывацца ў выразах для ўстаноўкі першапачатковай вышыні зазору для новых аперацый.</p><p><br/></p><p>Першапачаткова: &quot;3 мм&quot;</p></body></html> Safe - Safe + Бяспечна <html><head/><body><p>Expression set as SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> - <html><head/><body><p>Expression set as SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> + <html><head/><body><p>Выраз, які зададзеная як бяспечная вышыня для новай аперацыі.</p><p><br/></p><p>Першапачаткова: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> <html><head/><body><p>SafeHeightOffset can be for expressions to set the SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;5 mm&quot;</p></body></html> - <html><head/><body><p>SafeHeightOffset can be for expressions to set the SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;5 mm&quot;</p></body></html> + <html><head/><body><p>SafeHeightOffset - можа ўжывацца ў выразах для ўстаноўкі бяспечнай вышыні для новых аперацый.</p><p><br/></p><p>Першапачаткова: &quot;5 мм&quot;</p></body></html> @@ -3883,7 +3883,7 @@ p, li { white-space: pre-wrap; } Rapid Speeds - Rapid Speeds + Хуткія падачы @@ -3893,7 +3893,7 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>Rapid horizontal speed assigned as HorizRapid to new ToolController.</p></body></html> - <html><head/><body><p>Rapid horizontal speed assigned as HorizRapid to new ToolController.</p></body></html> + <html><head/><body><p>Хуткая гарызантальная падача, якая прысвоеная як гарызантальная падача да новага Кантролера інструменту.</p></body></html> @@ -3903,7 +3903,7 @@ p, li { white-space: pre-wrap; } <html><head/><body><p>Rapid vertical speed assigned to VertRapid of new ToolController.</p></body></html> - <html><head/><body><p>Rapid vertical speed assigned to VertRapid of new ToolController.</p></body></html> + <html><head/><body><p>Хуткая вертыкальная падача, якая прысвоеная як вертыкальная падача да новага Кантролера інструменту.</p></body></html> diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm index 032a747702..0ceb6245aa 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index c3e5979ca0..651898c752 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -1187,7 +1187,7 @@ TextLabel - Etiqueta de Text + Etiqueta de text @@ -1328,7 +1328,7 @@ <html><head/><body><p>Tree of existing edges and their potential extensions.</p></body></html> - <html><head/><body><p>Tree of existing edges and their potential extensions.</p></body></html> + <html><head/><body><p>Arbre de les vores existents i les seves extensions potencials.</p></body></html> @@ -2491,7 +2491,7 @@ <html><head/><body><p>References to Tool Bits and their shapes can either be stored with an absolute path or with a relative path to the search path.</p><p>Generally it is recommended to use relative paths due to their flexibility and robustness to layout changes.</p><p>Should multiple tools or tool shapes with the same name exist in different directories it can be required to use absolute paths. </p></body></html> - <html><head/><body><p>References to Tool Bits and their shapes can either be stored with an absolute path or with a relative path to the search path.</p><p>Generally it is recommended to use relative paths due to their flexibility and robustness to layout changes.</p><p>Should multiple tools or tool shapes with the same name exist in different directories it can be required to use absolute paths. </p></body></html> + <html><head/><body><p>Les referències als Tool bits i les seves formes es poden emmagatzemar amb un camí absolut o amb un camí relatiu al camí de cerca. </p><p>Generalment es recomana utilitzar camins relatius a causa de la seva flexibilitat i robustesa per als canvis de disposició.</p><p>Si existeixen múltiples eines o formes d'eines amb el mateix nom en diferents directoris, es pot requerir que utilitzin camins absoluts. </p></body></html> @@ -3338,7 +3338,7 @@ p, li { white-space: pre-wrap; } TextLabel - Etiqueta de Text + Etiqueta de text @@ -3449,7 +3449,7 @@ p, li { white-space: pre-wrap; } TextLabel - Etiqueta de Text + Etiqueta de text diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm index e7298c0a58..6648cf356d 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index 7f1d3b9223..afcf169eff 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -34,7 +34,7 @@ Select a workplane for a FeatureArea - Select a workplane for a FeatureArea + Выберите рабочую плоскость для функционального пространства @@ -78,22 +78,22 @@ Create Path Area View - Create Path Area View + Создать просмотр области пути Create Path Area - Create Path Area + Создать область пути Select Workplane for Path Area - Select Workplane for Path Area + Выберите рабочую плоскость для области пути Create Path Compound - Create Path Compound + Создать объединение пути @@ -106,7 +106,7 @@ Create Job - Создать Задание + Создать задание @@ -126,7 +126,7 @@ Select Base Models - Выберите Базовые Модели + Выберите базовые модели @@ -141,12 +141,12 @@ Base Models - Базовые Модели + Базовые модели Job Template Export - Экспорт Шаблона Работы + Экспорт шаблона задания @@ -166,7 +166,7 @@ <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> - <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> + <html><head/><body><p>Если включенные определения контроллера инструментов хранятся в шаблоне.</p></body></html> @@ -176,7 +176,7 @@ <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> - <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> + <html><head/><body><p>Проверьте все контроллеры инструментов, которые должны быть включены в шаблон.</p></body></html> @@ -196,52 +196,52 @@ Operation Heights - Operation Heights + Высоты операции Operation Depths - Operation Depths + Глубины операции <html><head/><body><p>Enable to include the default rapid tool speeds in the template.</p></body></html> - <html><head/><body><p>Enable to include the default rapid tool speeds in the template.</p></body></html> + <html><head/><body><p>Включите, чтобы добавить в шаблон стандартные скорости быстрого хода инструмента.</p></body></html> Tool Rapid Speeds - Tool Rapid Speeds + Скорости быстрого хода инструмента <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> - <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> + <html><head/><body><p>Включите, чтобы добавить в шаблон стандартный режим охлаждения.</p></body></html> Coolant Mode - Coolant Mode + Режим охлаждения <html><head/><body><p>Enable all Operations for which the configuration values should be exported.</p><p><br/></p><p>Note that only operations are listed which currently have configuration values setup.</p></body></html> - <html><head/><body><p>Enable all Operations for which the configuration values should be exported.</p><p><br/></p><p>Note that only operations are listed which currently have configuration values setup.</p></body></html> + <html><head/><body><p>Включить все операции, для которых значения конфигурации должны быть экспортированы.</p><p><br/></p><p>Обратите внимание, что перечислены только операции, которые в настоящее время имеют значения конфигурации.</p></body></html> <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bound box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> - <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bound box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> + <html><head/><body><p>Если включено создание запасов включено в шаблон. Если шаблон не включает в себя складское определение, то будет использоваться алгоритм создания запасов по умолчанию (создание из связанного окна базового объекта).</p><p>Этот вариант наиболее полезен, если на складе есть коробка или цилиндр, или если машина имеет стандартное расположение для обработки.</p><p>Заметим, что этот параметр отключен, если в работе используется объект склада из существующего твердого - они не могут храниться в шаблоне.</p></body></html> Stock - Stock + Заготовка <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bound box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> - <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bound box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> + <html><head/><body><p>Если включено, текущие настройки размера для объекта по умолчанию включены в шаблон.</p><p>Для Box и Cylinder это означает фактический размер создаваемого твердого материала.</p><p>Для запаса из связанного поля базового объекта это означает дополнительный материал во всех направлениях. Складский объект, созданный из такого шаблона, получит базовый размер из базового объекта новой задачи и применит дополнительные настройки сохранения.</p></body></html> @@ -276,7 +276,7 @@ Post Processor - Post Processor + Пост-процессор @@ -286,7 +286,7 @@ Tool Controller Editor - Tool Controller Editor + Редактор инструментов @@ -296,37 +296,37 @@ Controller Name / Tool Number - Controller Name / Tool Number + Название контроллера / Номер инструмента Horiz. Feed - Horiz. Feed + Горизонтальная подача Vert. Feed - Vert. Feed + Вертикальная подача Horiz Rapid - Horiz Rapid + Горизонтальная скорость Vert Rapid - Vert Rapid + Вертикальная скорость Spindle - Spindle + Обороты Forward - Forward + Вперёд @@ -386,7 +386,7 @@ val1,val2,val3,... - val1,val2,val3,... + val1,val2,val3,... @@ -396,7 +396,7 @@ Enums - Enums + Перечисления @@ -411,17 +411,17 @@ Create another - Create another + Создать другое Library Manager - Library Manager + Менеджер библиотеки Create Toolbit - Create Toolbit + Создать Наборный инструмент @@ -431,7 +431,7 @@ Add Existing - Add Existing + Добавить существующий @@ -479,22 +479,22 @@ Choose a Path Job - Choose a Path Job + Выбрать задание Path Choose a Tool Controller - Choose a Tool Controller + Выберите контроллер инструмента Tool Controller - Tool Controller + Контроллер инструмента Copy Selected Tools - Copy Selected Tools + Скопировать выбранные инструменты @@ -512,7 +512,7 @@ Processor - Processor + Процессор @@ -574,12 +574,12 @@ Extend Model's Bound Box - Extend Model's Bound Box + Расширить область модели Use Existing Solid - Use Existing Solid + Использовать существующий твердый @@ -690,7 +690,7 @@ <html><head/><body><p>List of operations with Base Geometry in current Job.</p></body></html> - <html><head/><body><p>List of operations with Base Geometry in current Job.</p></body></html> + <html><head/><body><p>Список операций с базовой геометрией в текущем задании.</p></body></html> @@ -751,7 +751,7 @@ Feature - Feature + Характеристика @@ -772,7 +772,7 @@ <html><head/><body><p>Remove all list items and fill list with all eligible features from the job's base object.</p></body></html> - <html><head/><body><p>Remove all list items and fill list with all eligible features from the job's base object.</p></body></html> + <html><head/><body><p>Очистить список и заполнить всеми подходящими функциями из базового объекта задания.</p></body></html> @@ -822,13 +822,13 @@ All locations will be processed using the same operation properties. - All locations will be processed using the same operation properties. + Все места будут обработаны с использованием одинаковых операционных свойств. Start Depth - Start Depth + Начальная глубина @@ -846,7 +846,7 @@ Final Depth - Final Depth + Конечная глубина @@ -864,7 +864,7 @@ Step Down - Step Down + Шаг вниз @@ -874,7 +874,7 @@ Finish Step Down - Finish Step Down + Завершить шаг вниз @@ -884,17 +884,17 @@ Min Diameter - Min Diameter + Мин. диаметр Max Diameter - Max Diameter + Макс. диаметр Safe Height - Safe Height + Безопасная высота @@ -904,7 +904,7 @@ Clearance Height - Clearance Height + Высота зазора @@ -921,7 +921,7 @@ ToolController - ToolController + Контроллер инструментов @@ -961,7 +961,7 @@ Coolant Mode - Coolant Mode + Режим охлаждения @@ -977,19 +977,19 @@ Tool Controller - Tool Controller + Контроллер инструмента Coolant - Coolant + Охлаждающая жидкость Cut Region - Cut Region + Вырезать область @@ -999,7 +999,7 @@ Operation Type - Operation Type + Тип операции @@ -1101,7 +1101,7 @@ Use Outline - Use Outline + Использовать контур @@ -1137,7 +1137,7 @@ W = - W = + W = @@ -1162,7 +1162,7 @@ h = - h = + h = @@ -1262,12 +1262,12 @@ Inside - Inside + Внутри Outside - Outside + Снаружи @@ -1277,7 +1277,7 @@ Step over percent - Step over percent + Шаг с обходом в процентах @@ -1293,7 +1293,7 @@ Enable Extensions - Enable Extensions + Включить расширения @@ -1318,7 +1318,7 @@ Default Length - Default Length + Длина по умолчанию @@ -1368,7 +1368,7 @@ Cut Mode - Cut Mode + Режим резки @@ -1388,7 +1388,7 @@ Pattern - Pattern + Шаблон @@ -1398,7 +1398,7 @@ ZigZag - ZigZag + ZigZag @@ -1408,7 +1408,7 @@ ZigZagOffset - ZigZagOffset + ZigZag смещение @@ -1462,7 +1462,7 @@ Use Start Point - Use Start Point + Использовать начальную точку @@ -1502,12 +1502,12 @@ X Offset - X Offset + Смещение по X Y Offset - Y Offset + Смещение по Y @@ -1532,13 +1532,13 @@ Cut Side - Cut Side + Вырезать грань PLACEHOLDER - PLACEHOLDER + МЕСТО @@ -1558,7 +1558,7 @@ Process Holes - Process Holes + Делать отверстие @@ -1568,7 +1568,7 @@ Use Compensation - Use Compensation + Использовать Компенсацию @@ -1578,7 +1578,7 @@ Process Circles - Process Circles + Делать круги @@ -1588,7 +1588,7 @@ Process Perimeter - Process Perimeter + Делать периметр @@ -1616,13 +1616,13 @@ Lowest Point - Lowest Point + Низшая точка Highest Point - Highest Point + Высшая точка @@ -1707,7 +1707,7 @@ Single-pass - Single-pass + Одноразовый переход @@ -1717,7 +1717,7 @@ Path Orientation - Path Orientation + Расположение пути @@ -1727,7 +1727,7 @@ Start to End - Start to End + Начать до конца @@ -1742,13 +1742,13 @@ Reverse cut direction - Reverse cut direction + Поменять направление обработки BoundBox - BoundBox + Габариты @@ -1770,7 +1770,7 @@ Cut Pattern - Cut Pattern + Вырезать шаблон @@ -1816,7 +1816,7 @@ Drop Cutter Direction - Drop Cutter Direction + Направление вырезания @@ -1826,7 +1826,7 @@ Depth offset - Depth offset + Смещение Глубины @@ -1867,7 +1867,7 @@ Optimize Linear Paths - Optimize Linear Paths + Оптимизация Линейных путей @@ -1877,7 +1877,7 @@ Boundary Enforcement - Boundary Enforcement + Граница применения @@ -1887,12 +1887,12 @@ Optimize StepOver Transitions - Optimize StepOver Transitions + Оптимизировать шаг переходов Setup Global - Setup Global + Настройка глобальных @@ -1922,7 +1922,7 @@ Expression - Expression + Выражение @@ -1962,7 +1962,7 @@ Rapid Speeds - Rapid Speeds + Большая скорость @@ -2008,7 +2008,7 @@ Major Diameter - Major Diameter + Основной диаметр @@ -2140,23 +2140,23 @@ Length Offset - Length Offset + Длина смещения Tool Parameter - Tool Parameter + Параметр инструмента Flat Radius - Flat Radius + Плоский радиус Corner Radius - Corner Radius + Радиус углов @@ -2166,27 +2166,27 @@ Cutting Edge Height - Cutting Edge Height + Высота режущего ребра D = - D = + D = d = - d = + d = H = - H = + H = S = - S = + S = @@ -2201,7 +2201,7 @@ Default Width - Default Width + Ширина по умолчанию @@ -2211,7 +2211,7 @@ Default Height - Default Height + Высота по умолчанию @@ -2221,7 +2221,7 @@ Default Angle - Default Angle + Угол по умолчанию @@ -2231,7 +2231,7 @@ Default Radius - Default Radius + Радиус по умолчанию @@ -2259,7 +2259,7 @@ Job Preferences - Job Preferences + Настройки задания @@ -2289,7 +2289,7 @@ <html><head/><body><p>The default template to be selected when creating a new Job. </p><p><br/></p><p>This can be helpful when almost all jobs will be processed by the same machine with a similar setup.</p><p><br/></p><p>If left empty no template will be preselected.</p></body></html> - <html><head/><body><p>The default template to be selected when creating a new Job. </p><p><br/></p><p>This can be helpful when almost all jobs will be processed by the same machine with a similar setup.</p><p><br/></p><p>If left empty no template will be preselected.</p></body></html> + <html><head/><body><p>Шаблон по умолчанию будет выделен при создании нового задания. </p><p><br/></p><p>Полезно, когда почти все задания будут обрабатываться на одном станке с одной юстировкой.</p><p><br/></p><p>Если оставить пустым, ни один шаблон выделен не будет.</p></body></html> @@ -2299,33 +2299,33 @@ Default Geometry Tolerance - Default Geometry Tolerance + Допуск на геометрию по умолчанию Default value for new Jobs, used for computing Paths. Smaller increases accuracy, but slows down computation - Default value for new Jobs, used for computing Paths. Smaller increases accuracy, but slows down computation + Значение по умолчанию для новых заданий, используемых для вычисления пути. Меньше повышает точность, но замедляет вычисления Default Curve Accuracy - Default Curve Accuracy + Точность кривой по умолчанию Post Processor - Post Processor + Пост-процессор Output File - Output File + Выходной файл Default Path - Default Path + Путь по умолчанию @@ -2335,7 +2335,7 @@ File Save Policy - File Save Policy + Политика сохранения файлов @@ -2345,27 +2345,27 @@ Open File Dialog - Open File Dialog + Открыть диалоговое окно Open File Dialog on conflict - Open File Dialog on conflict + Открыть диалоговое окно файла при конфликте Overwrite existing file - Overwrite existing file + Переписать существующий файл? Append Unique ID on conflict - Append Unique ID on conflict + Добавить уникальный ID при конфликте Post Processors Selection - Post Processors Selection + Выбор пост-процессоров @@ -2375,7 +2375,7 @@ Default Post Processor - Default Post Processor + Пост-процессор по умолчанию @@ -2385,7 +2385,7 @@ DefaultPostProcessor - DefaultPostProcessor + Постпроцессор по умолчанию @@ -2395,7 +2395,7 @@ Default Arguments - Default Arguments + Аргументы по умолчанию @@ -2405,12 +2405,12 @@ Setup - Setup + Конфигурация Stock - Stock + Заготовка @@ -2425,7 +2425,7 @@ Extend Model's Bound Box - Extend Model's Bound Box + Расширить область модели @@ -2496,7 +2496,7 @@ Store Absolute Paths - Store Absolute Paths + Сохранять абсолютные пути @@ -2513,7 +2513,7 @@ GUI - GUI + Графический Интерфейс @@ -2593,7 +2593,7 @@ UI Settings - UI Settings + Настройки интерфейса @@ -2790,7 +2790,7 @@ p, li { white-space: pre-wrap; } Radius / Center: - Radius / Center: + Радиус / центр: @@ -2810,7 +2810,7 @@ p, li { white-space: pre-wrap; } Include Layers - Include Layers + Включить слои @@ -2852,7 +2852,7 @@ p, li { white-space: pre-wrap; } Axis Mapping - Axis Mapping + Сопоставление Оси @@ -2862,32 +2862,32 @@ p, li { white-space: pre-wrap; } X->A - X->A + X->А Y->A - Y->A + Y->A X->B - X->B + X->B Y->B - Y->B + Y->B X->C - X->C + X->C Y->C - Y->C + Y->C @@ -2968,7 +2968,7 @@ p, li { white-space: pre-wrap; } adaptive - adaptive + адаптивный @@ -3013,7 +3013,7 @@ p, li { white-space: pre-wrap; } Offset Distance - Offset Distance + Расстояние смещения @@ -3048,7 +3048,7 @@ p, li { white-space: pre-wrap; } Angle - Angle + Угол @@ -3083,7 +3083,7 @@ p, li { white-space: pre-wrap; } Edit... - Edit... + Изменить... @@ -3093,18 +3093,18 @@ p, li { white-space: pre-wrap; } Auto Generate - Auto Generate + Создать автоматически Replace All - Replace All + Заменить всё Copy From - Copy From + Копировать из @@ -3119,22 +3119,22 @@ p, li { white-space: pre-wrap; } Drag to reorder, then update. - Drag to reorder, then update. + Перетащите для изменения порядка, затем обновите. Add item selected in window. - Add item selected in window. + Добавить элемент выбранный в окне. add - add + добавить Remove Item selected in list, then update. - Remove Item selected in list, then update. + Удалить элемент из списка, а затем обновить. @@ -3164,22 +3164,22 @@ p, li { white-space: pre-wrap; } Start Depth - Start Depth + Начальная глубина Final Depth - Final Depth + Конечная глубина Step Down - Step Down + Шаг вниз Finish Step Down - Finish Step Down + Завершить шаг вниз @@ -3189,12 +3189,12 @@ p, li { white-space: pre-wrap; } Safe Height - Safe Height + Безопасная высота Clearance Height - Clearance Height + Высота зазора @@ -3204,12 +3204,12 @@ p, li { white-space: pre-wrap; } ToolController - ToolController + Контроллер инструментов Coolant Mode - Coolant Mode + Режим охлаждения @@ -3323,12 +3323,12 @@ p, li { white-space: pre-wrap; } Accuracy: - Accuracy: + Точность: Job: - Job: + Задание: @@ -3356,7 +3356,7 @@ p, li { white-space: pre-wrap; } Tool Bit Attributes - Tool Bit Attributes + Свойства инструмента @@ -3366,7 +3366,7 @@ p, li { white-space: pre-wrap; } Tool Bit - Tool Bit + Инструмент @@ -3416,7 +3416,7 @@ p, li { white-space: pre-wrap; } Cutting Edge Height - Cutting Edge Height + Высота режущего ребра @@ -3436,7 +3436,7 @@ p, li { white-space: pre-wrap; } Attributes - Attributes + Атрибуты @@ -3444,7 +3444,7 @@ p, li { white-space: pre-wrap; } Tool Selector - Tool Selector + Выбор инструментов @@ -3464,7 +3464,7 @@ p, li { white-space: pre-wrap; } Add To Job - Add To Job + Добавить к заданию @@ -3472,7 +3472,7 @@ p, li { white-space: pre-wrap; } Job Edit - Job Edit + Редактировать задание @@ -3509,7 +3509,7 @@ p, li { white-space: pre-wrap; } Template Export - Template Export + Экспорт шаблона @@ -3519,12 +3519,12 @@ p, li { white-space: pre-wrap; } Output File - Output File + Выходной файл Processor - Processor + Процессор @@ -3539,7 +3539,7 @@ p, li { white-space: pre-wrap; } Work Coordinate Systems - Work Coordinate Systems + Рабочая система координат WCS @@ -3549,7 +3549,7 @@ p, li { white-space: pre-wrap; } Systems - Systems + Системы @@ -3584,7 +3584,7 @@ p, li { white-space: pre-wrap; } Setup - Setup + Конфигурация @@ -3594,7 +3594,7 @@ p, li { white-space: pre-wrap; } Stock - Stock + Заготовка @@ -3609,12 +3609,12 @@ p, li { white-space: pre-wrap; } Extend Model's Bound Box - Extend Model's Bound Box + Расширить область модели Use Existing Solid - Use Existing Solid + Использовать существующий твердый @@ -3725,12 +3725,12 @@ p, li { white-space: pre-wrap; } Move - XY - Move - XY + Переместить - XY Rotate - XY - Rotate - XY + Поворот - XY @@ -3741,7 +3741,7 @@ p, li { white-space: pre-wrap; } Default Values - Default Values + Значение по Умолчанию @@ -3751,7 +3751,7 @@ p, li { white-space: pre-wrap; } Start Depth - Start Depth + Начальная глубина @@ -3761,7 +3761,7 @@ p, li { white-space: pre-wrap; } Final Depth - Final Depth + Конечная глубина @@ -3771,7 +3771,7 @@ p, li { white-space: pre-wrap; } Step Down - Step Down + Шаг вниз @@ -3786,7 +3786,7 @@ p, li { white-space: pre-wrap; } Expression - Expression + Выражение @@ -3826,12 +3826,12 @@ p, li { white-space: pre-wrap; } Coolant - Coolant + Охлаждающая жидкость Coolant Mode - Coolant Mode + Режим охлаждения @@ -3868,7 +3868,7 @@ p, li { white-space: pre-wrap; } Spindle - Spindle + Обороты @@ -3883,7 +3883,7 @@ p, li { white-space: pre-wrap; } Rapid Speeds - Rapid Speeds + Большая скорость @@ -3908,12 +3908,12 @@ p, li { white-space: pre-wrap; } Workplan - Workplan + План работы Active Tool - Active Tool + Активный инструмент diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.qm b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.qm index 11d757c179..9fb244bd30 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts index bea44933d2..7e7f3fcca7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts @@ -564,17 +564,17 @@ Create Box - Create Box + Napravi kutiju Create Cylinder - Create Cylinder + Napravi Cilindar Extend Model's Bound Box - Extend Model's Bound Box + Uvećaj graničnu kutiju modela @@ -589,47 +589,47 @@ Ext. X - Ext. X + Uveć. X <html><head/><body><p>Extension of BoundBox's MinX.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MinX.</p></body></html> + <html><head/><body><p>Uvećanje granične kutije MinX.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxX.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MaxX.</p></body></html> + <html><head/><body><p>Uvećanje granične kutije MaxX.</p></body></html> Ext. Y - Ext. Y + Uveć. Y <html><head/><body><p>Extension of BoundBox's MinY.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MinY.</p></body></html> + <html><head/><body><p>Uvećanje granične kutije MinY.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxY.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MaxY.</p></body></html> + <html><head/><body><p>Uvećanje granične kutije MaxY.</p></body></html> Ext. Z - Ext. Z + Uveć. Z <html><head/><body><p>Extension of BoundBox's MinZ.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MinZ.</p></body></html> + <html><head/><body><p>Uvećanje granične kutije MinZ.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxZ.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MaxZ.</p></body></html> + <html><head/><body><p>Uvećanje granične kutije MaxZ.</p></body></html> @@ -2320,7 +2320,7 @@ Output File - Output File + Izlazna datoteka @@ -2415,32 +2415,32 @@ Create Box - Create Box + Napravi kutiju Create Cylinder - Create Cylinder + Napravi Cilindar Extend Model's Bound Box - Extend Model's Bound Box + Uvećaj graničnu kutiju modela Ext. X - Ext. X + Uveć. X Ext. Y - Ext. Y + Uveć. Y Ext. Z - Ext. Z + Uveć. Z @@ -3258,12 +3258,12 @@ p, li { white-space: pre-wrap; } Path Simulator - Path Simulator + Simulator putanje Stop running simulation - Stop running simulation + Zaustavi simulaciju @@ -3273,7 +3273,7 @@ p, li { white-space: pre-wrap; } Activate / resume simulation - Activate / resume simulation + Pokreni/nastavi simulaciju @@ -3283,17 +3283,17 @@ p, li { white-space: pre-wrap; } Pause simulation - Pause simulation + Pauziraj simulaciju Pause - Pause + Pauza Single step simulation - Single step simulation + Simulacija po koracima @@ -3303,12 +3303,12 @@ p, li { white-space: pre-wrap; } Run simulation till end without animation - Run simulation till end without animation + Pokreni simulaciju do kraja bez animacije Fast Forward - Fast Forward + Premotaj unapred @@ -3318,7 +3318,7 @@ p, li { white-space: pre-wrap; } G/s - G/s + G-kod/s @@ -3333,7 +3333,7 @@ p, li { white-space: pre-wrap; } * Note: Volumetric simulation, inaccuracies are inherent. - * Note: Volumetric simulation, inaccuracies are inherent. + * Napomena: Zapreminska simulacija nije precizna i služi samo za vizuelnu proveru. @@ -3509,7 +3509,7 @@ p, li { white-space: pre-wrap; } Template Export - Template Export + Izvezi šablon @@ -3519,7 +3519,7 @@ p, li { white-space: pre-wrap; } Output File - Output File + Izlazna datoteka @@ -3599,17 +3599,17 @@ p, li { white-space: pre-wrap; } Create Box - Create Box + Napravi kutiju Create Cylinder - Create Cylinder + Napravi Cilindar Extend Model's Bound Box - Extend Model's Bound Box + Uvećaj graničnu kutiju modela @@ -3624,17 +3624,17 @@ p, li { white-space: pre-wrap; } Ext. X - Ext. X + Uveć. X Ext. Y - Ext. Y + Uveć. Y Ext. Z - Ext. Z + Uveć. Z diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm index 3b66f7002d..48b82dbac1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index 3a7ad102ee..991b34812a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -564,17 +564,17 @@ Create Box - Create Box + Направи кутију Create Cylinder - Create Cylinder + Направи Цилиндар Extend Model's Bound Box - Extend Model's Bound Box + Увећај граничну кутију модела @@ -589,47 +589,47 @@ Ext. X - Ext. X + Увећ. X <html><head/><body><p>Extension of BoundBox's MinX.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MinX.</p></body></html> + <html><head/><body><p>Увећање граничне кутије МинX.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxX.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MaxX.</p></body></html> + <html><head/><body><p>Увећање граничне кутије МахX.</p></body></html> Ext. Y - Ext. Y + Увећ. Z <html><head/><body><p>Extension of BoundBox's MinY.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MinY.</p></body></html> + <html><head/><body><p>Увећање граничне кутије МинY.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxY.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MaxY.</p></body></html> + <html><head/><body><p>Увећање граничне кутије МахY.</p></body></html> Ext. Z - Ext. Z + Увећ. Y <html><head/><body><p>Extension of BoundBox's MinZ.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MinZ.</p></body></html> + <html><head/><body><p>Увећање граничне кутије МинZ.</p></body></html> <html><head/><body><p>Extension of BoundBox's MaxZ.</p></body></html> - <html><head/><body><p>Extension of BoundBox's MaxZ.</p></body></html> + <html><head/><body><p>Увећање граничне кутије МахZ.</p></body></html> @@ -2320,7 +2320,7 @@ Output File - Output File + Излазна датотека @@ -2415,32 +2415,32 @@ Create Box - Create Box + Направи кутију Create Cylinder - Create Cylinder + Направи Цилиндар Extend Model's Bound Box - Extend Model's Bound Box + Увећај граничну кутију модела Ext. X - Ext. X + Увећ. X Ext. Y - Ext. Y + Увећ. Z Ext. Z - Ext. Z + Увећ. Y @@ -3258,12 +3258,12 @@ p, li { white-space: pre-wrap; } Path Simulator - Path Simulator + Симулатор путање Stop running simulation - Stop running simulation + Заустави симулацију @@ -3273,7 +3273,7 @@ p, li { white-space: pre-wrap; } Activate / resume simulation - Activate / resume simulation + Покрени/настави симулацију @@ -3283,17 +3283,17 @@ p, li { white-space: pre-wrap; } Pause simulation - Pause simulation + Паузирај симулацију Pause - Pause + Пауза Single step simulation - Single step simulation + Симулација по корацима @@ -3303,12 +3303,12 @@ p, li { white-space: pre-wrap; } Run simulation till end without animation - Run simulation till end without animation + Покрени симулацију до краја без анимације Fast Forward - Fast Forward + Премотај унапред @@ -3318,7 +3318,7 @@ p, li { white-space: pre-wrap; } G/s - G/s + Г-код/с @@ -3333,7 +3333,7 @@ p, li { white-space: pre-wrap; } * Note: Volumetric simulation, inaccuracies are inherent. - * Note: Volumetric simulation, inaccuracies are inherent. + * Напомена: Запреминска симулација није прецизна и служи само за визуелну проверу. @@ -3509,7 +3509,7 @@ p, li { white-space: pre-wrap; } Template Export - Template Export + Извези шаблон @@ -3519,7 +3519,7 @@ p, li { white-space: pre-wrap; } Output File - Output File + Излазна датотека @@ -3599,17 +3599,17 @@ p, li { white-space: pre-wrap; } Create Box - Create Box + Направи кутију Create Cylinder - Create Cylinder + Направи Цилиндар Extend Model's Bound Box - Extend Model's Bound Box + Увећај граничну кутију модела @@ -3624,17 +3624,17 @@ p, li { white-space: pre-wrap; } Ext. X - Ext. X + Увећ. X Ext. Y - Ext. Y + Увећ. Z Ext. Z - Ext. Z + Увећ. Y diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.qm index 54b4e8b60f..030ddb06f9 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.ts index 37ed187068..bf2d2dc392 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_be.ts @@ -142,7 +142,7 @@ Create mesh segments - Стварыць сегменты паліганальнай сеткі + Стварыць адрэзкі паліганальнай сеткі diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm index 02c2c03c12..00b15604db 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts index 37a312636b..e78405a616 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts @@ -225,7 +225,7 @@ View triangulation - Veure triangulació + Visualitza la triangulació diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_be.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_be.qm index 04f17d56a6..2c94b03c9b 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_be.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_be.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts index 8b5361cef2..b9376a430f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts @@ -735,7 +735,7 @@ Hide / Show - Схаваць / Адлюстраваць + Схаваць / Паказаць @@ -838,12 +838,12 @@ Base 0 - База 0 + Аснова 0 Base - База + Асноўныя diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm index 2ae04de7c2..d4c1a5f68e 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts index 99938a4d63..c8bc903b7e 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts @@ -436,7 +436,7 @@ You have to hover above a geometry (Preselection) with the mouse to use this command. See documentation for details. - Ha de passar per sobre d'una geometria (preselecció) amb el ratolí per a utilitzar aquesta instrucció. Veure la documentació per a més detalls. + Heu de passar per sobre d'una geometria (preselecció) amb el ratolí per a utilitzar aquesta instrucció. Vegeu la documentació per a més detalls. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm index 50327146e1..b2acc06562 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts index b7bf3a526c..8bafdb5d85 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts @@ -196,7 +196,7 @@ Insert robot Tool location into trajectory - Вставить местоположение робота на траектории + Вставьте местоположение робота на траектории @@ -246,7 +246,7 @@ Set the default orientation for subsequent commands for waypoint creation - Задать ориентацию по умолчанию для последующих команд для создания маршрутной точки + Задать ориентацию по умолчанию для последующих команд для создания путевых точек @@ -291,7 +291,7 @@ Simulate a trajectory - Моделирование траектории + Имитация траектории @@ -392,7 +392,7 @@ Trajectory not valid - Траектория неправильная + Траектория не действительна @@ -415,7 +415,7 @@ Export program - Экспортная программа + Экспорт программы @@ -456,7 +456,7 @@ continuous ? - продолжительность ? + непрерывно ? @@ -481,7 +481,7 @@ No robot files installed - Нет установленных файлов робота + Файлы роботов не установлены @@ -570,22 +570,22 @@ A2 - А2 + A2 A3 - А3 + A3 A4 - А4 + A4 A5 - А5 + A5 @@ -910,7 +910,7 @@ Use - Используйте + Использовать @@ -925,12 +925,12 @@ Continues - Продолжается + Продолжить Discontinues - Прекращает + Прекращено @@ -968,7 +968,7 @@ Insert Robots - Вставить робота + Вставить роботов diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.qm index 1ac6bbae5f..91c0f01ba3 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts index 01a00ab0ea..a954ba0214 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts @@ -6,12 +6,12 @@ Show/hide B-spline curvature comb - Адлюстраваць/схаваць грабянец крывізны B-сплайна + Паказаць/схаваць грабянец крывізні B-сплайна Switches between showing and hiding the curvature comb for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем грабянца крывізны для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем грабянца крывізны для ўсіх B-сплайнаў @@ -19,12 +19,12 @@ Show/hide B-spline degree - Адлюстраўваць/схаваць ступень B-сплайна + Паказаць/схаваць ступень B-сплайна Switches between showing and hiding the degree for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем ступеняў для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем ступеняў для ўсіх B-сплайнаў @@ -32,12 +32,12 @@ Show/hide B-spline knot multiplicity - Адлюстраўваць/схаваць кратнасць вузлоў B-сплайна + Паказаць/схаваць кратнасць вузлоў B-сплайна Switches between showing and hiding the knot multiplicity for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем кратнасці вузлоў для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем кратнасці вузлоў для ўсіх B-сплайнаў @@ -45,12 +45,12 @@ Show/hide B-spline control point weight - Адлюстроўвае/хавае вагу кантрольнай кропкі B-сплайна + Паказаць/схаваць вагу кантрольнай кропкі B-сплайна Switches between showing and hiding the control point weight for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем вагі кантрольнай кропкі для ўсіх B-сплайнаў + Пераключэнне паміж адлюстраваннем і хаваннем вагі кантрольнай кропкі для ўсіх B-сплайнаўпаказваннем @@ -58,12 +58,12 @@ Show/hide B-spline control polygon - Адлюстраваць/схаваць палігон кіравання B-сплайна + Паказаць/схаваць палігон кіравання B-сплайна Switches between showing and hiding the control polygons for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем палігона кіравання для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем палігона кіравання для ўсіх B-сплайнаў @@ -97,32 +97,32 @@ Show/hide B-spline information layer - Адлюстраваць/схаваць інфармацыйны пласт B-сплайна + Паказаць/схаваць інфармацыйны пласт B-сплайна Show/hide B-spline degree - Адлюстраўваць/схаваць ступень B-сплайна + Паказаць/схаваць ступень B-сплайна Show/hide B-spline control polygon - Адлюстраваць/схаваць палігон кіравання B-сплайна + Паказаць/схаваць палігон кіравання B-сплайна Show/hide B-spline curvature comb - Адлюстраваць/схаваць грабянец крывізны B-сплайна + Паказаць/схаваць грабянец крывізні B-сплайна Show/hide B-spline knot multiplicity - Адлюстраўваць/схаваць кратнасць вузлоў B-сплайна + Паказаць/схаваць кратнасць вузлоў B-сплайна Show/hide B-spline control point weight - Адлюстроўвае/хавае вагу кантрольнай кропкі B-сплайна + Паказаць/схаваць вагу кантрольнай кропкі B-сплайна @@ -1193,17 +1193,14 @@ with respect to a line or a third point Set the 'Support' of a sketch. First select the supporting geometry, for example, a face or an edge of a solid object, then call this command, then choose the desired sketch. - Усталюйце 'Падтрымку ' эскізу. + Усталюйце 'Падтрымку' эскізу. Спачатку абярыце апорную геаметрыю, напрыклад, грань ці рабро суцэльнага аб'екту, -выклікайце гэтую каманду, потым абярыце патрэбны эскіз. - -Спачатку абярыце апорную геаметрыю, напрыклад, грань або рабро суцэльнага аб'екта, -затым выклічце гэту каманду, затым выберыце патрэбны эскіз. +выклікайце гэтую каманду, потым абярыце патрэбны эскіз. Some of the selected objects depend on the sketch to be mapped. Circular dependencies are not allowed. - Некаторыя з абраных аб'ектаў залежаць ад эскізу, які будзе адлюстраваны. Цыклічныя залежнасці не дазваляюцца. + Некаторыя з абраных аб'ектаў залежаць ад эскізу, якія будзе супастаўленыя. Цыклічныя залежнасці не дазваляюцца. @@ -1326,12 +1323,12 @@ This will clear the 'Support' property, if any. Show/hide internal geometry - Адлюстраваць/схаваць унутраную геаметрыю + Паказаць/схаваць унутраную геаметрыю Show all internal geometry or hide unused internal geometry - Адлюстраваць усю ўнутраную геаметрыю ці схаваць не ўжытую ўнутраную геаметрыю + Паказвае ўсю ўнутраную геаметрыю, ці хавае не ўжытую ўнутраную геаметрыю @@ -1505,12 +1502,12 @@ This will clear the 'Support' property, if any. Activate/deactivate constraint - Уключыць/адключыць абмежаванні + Задзейнічаць/адключыць абмежаванні Activates or deactivates the selected constraints - Уключае альбо адключае абраныя абмежаванні + Задзейнічае ці адключае абраныя абмежаванні @@ -1523,7 +1520,7 @@ This will clear the 'Support' property, if any. Toggles the toolbar or selected geometry to/from construction mode - Пераключае панэль інструментаў альбо абраную геаметрыю ў/з будаўнічы рэжым + Пераключае панэль інструментаў альбо абраную геаметрыю ў будаўнічы рэжым і наадварот @@ -1531,7 +1528,7 @@ This will clear the 'Support' property, if any. Toggle driving/reference constraint - Пераключае кіруючае/апорнае абмежаванне + Пераключыць кіруючае/апорнае абмежаванне @@ -1565,7 +1562,7 @@ into driving or reference mode Validate a sketch by looking at missing coincidences, invalid constraints, degenerated geometry, etc. - Паверыць эскіз, праглядзеўшы супадзенні, якія адсутнічаюць, недапушчальныя абмежаванні, выраджаную геаметрыяю і г. д. + Паверыць эскіз, праглядзеўшы супадзенні, якія адсутнічаюць, хібныя абмежаванні, выраджаную геаметрыяю і г. д. @@ -1844,12 +1841,12 @@ invalid constraints, degenerated geometry, etc. Toggle constraint to driving/reference - Пераключае абмежаванне паміж кіруючае/апорнае + Пераключае абмежаванне паміж кіруючым і апорным Activate/Deactivate constraint - Уключыць/Адключыць абмежаванне + Задзейнічаць/Адключыць абмежаванне @@ -1889,7 +1886,7 @@ invalid constraints, degenerated geometry, etc. Toggle draft from/to draft - Пераключыць чарнавік з/на чарнавік + Пераключыць чарнавік з чарнавіка і наадварот @@ -3468,22 +3465,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Toggle to/from reference - Пераключэнне з/на эталон + Пераключэнне з апорнага і наадварот Deactivate - Дэактываваць + Адключыць Activate - Актываваць + Задзейнічаць Show constraints - Адлюстраваць абмежаванні + Паказаць абмежаванні @@ -3858,9 +3855,7 @@ with respect to the others using construction lines If selected, it substitutes dimensional constraints by geometric constraints in the copies, so that a change in the original element is directly reflected on copies - Калі абрана, ён замяняе памерныя абмежаванні на геаметрычныя абмежаванні -у копіях, так што змена зыходнага элемента непасрэдна -адлюстроўваецца на копіях + Калі абрана, ён замяняе памерныя абмежаванні на геаметрычныя абмежаванні ў копіях, так што змена зыходнага элемента непасрэдна адлюстроўваецца на копіях @@ -3938,7 +3933,7 @@ reflected on copies Show section 'Advanced solver control' - Адлюстраваць падзел 'Пашыранае кіраванне рашальнікам' + Паказаць падзел 'Пашыранае кіраванне рашальнікам' @@ -3950,7 +3945,7 @@ reflected on copies Show section 'Edit controls' - Адлюстраваць падзел 'Кіраванне элементамі змены' + Паказаць падзел 'Кіраванне элементамі змены' @@ -4144,12 +4139,12 @@ Requires to re-enter edit mode to take effect. Invalid Sketch - Недапушчальны Эскіз + Хібны Эскіз Color of geometry indicating an invalid sketch - Колер геаметрыі, які паказвае на недапушчальны эскіз + Колер геаметрыі, які паказвае на хібны эскіз @@ -4257,13 +4252,13 @@ Requires to re-enter edit mode to take effect. The 3D view is scaled based on this factor. - Маштаб трохмернага выгляду на аснове гэтага фактару. + Маштаб трохмернага прадстаўлення, які заснаваны на гэтым каэфіцыенце. Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - Адзінкі вымярэння базавай даўжыні не будуць адлюстроўвацца ў абмежаваннях ці або каардынатах паказальніка. + Адзінкі вымярэння асноўнай даўжыні не будуць адлюстроўвацца ў абмежаваннях ці каардынатах паказальніка. Падтрымліваюцца ўсе сістэмы адзінак вымярэння, акрамя 'US customary' і 'Building US/Euro'. @@ -4309,7 +4304,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Geometry creation "Continue Mode" - Стварэнне геаметрыі "Рэжым працягу" + Стварэнне геаметрыі "Бесперапынны рэжым" @@ -4319,12 +4314,12 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Constraint creation "Continue Mode" - Стварэнне абмежавання "Рэжым працягу" + Стварэнне абмежавання "Бесперапынны рэжым" Hide base length units for supported unit systems - Схаваць базавай адзінкі вымярэння даўжыні для сістэм адзінак вымярэння, якія падтрымліваюцца + Схаваць асноўныя адзінкі вымярэння даўжыні для сістэм адзінак вымярэння, якія падтрымліваюцца @@ -4334,7 +4329,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Show dimensional constraint name with format - Адлюстраваць імя памернага абмежавання ў фармаце + Паказаць імя памернага абмежавання ў фармаце @@ -4357,7 +4352,7 @@ Defaults to: %N = %V Show coordinates beside cursor while editing - Адлюстраваць каардынаты побач з паказальнікам падчас змены + Паказаць каардынаты побач з паказальнікам падчас змены @@ -4387,22 +4382,22 @@ Defaults to: %N = %V When opening a sketch, show sources for external geometry links. - Пры адкрыцці эскіза адлюстраваць крыніцы спасылак вонкавай геаметрыі. + Пры адкрыцці эскіза паказваць крыніцы сувязяў вонкавай геаметрыі. Show objects used for external geometry - Адлюстраваць аб'екты, якія ўжываюцца для вонкавай геаметрыі + Паказаць аб'екты, якія ўжываюцца для вонкавай геаметрыі When opening a sketch, show objects the sketch is attached to. - Пры адкрыцці эскіза адлюстраваць аб'екты, да якіх прымацаваны эскіз. + Пры адкрыцці эскіза паказваць аб'екты, да якіх прымацаваны эскіз. Show objects that the sketch is attached to - Адлюстраваць аб'екты, да якіх прымацаваны эскіз + Паказаць аб'екты, да якіх прымацаваны эскіз @@ -4489,22 +4484,22 @@ Then objects are only visible behind the sketch plane. No invalid constraints - Недапушчальныя абмежаванні адсутнічаюць + Хібныя абмежаванні адсутнічаюць No invalid constraints found - Недапушчальныя абмежаванні не выяўлены + Хібныя абмежаванні не выяўлены Invalid constraints - Недапушчальны абмежаванні + Хібныя абмежаванні Invalid constraints found - Выяўлены недапушчальныя абмежаванні + Выяўлены хібныя абмежаванні @@ -4521,7 +4516,7 @@ Then objects are only visible behind the sketch plane. %2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15 - Выяўлена %1 зваротныя дугі вонкавай геаметрыі. Іх канчатковыя кропкі абведзеныя ў трохмерным выглядзе. + Выяўлена %1 зваротныя дугі вонкавай геаметрыі. Іх канчатковыя кропкі абведзеныя ў трохмерным прадстаўленні. %2 абмежаванняў звязана з канчатковымі кропкамі. Гэтыя абмежаванні пералічаныя ў Праглядзе справаздачы (меню Від -> Панэлі -> Прагляд справаздачы). @@ -4532,7 +4527,7 @@ Click "Swap endpoints in constraints" button to reassign endpoints. Do this only %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. However, no constraints linking to the endpoints were found. - Выяўлена %1 зваротныя дугі вонкавай геаметрыі. Іх канчатковыя кропкі абведзеныя ў трохмерным выглядзе. + Выяўлена %1 зваротныя дугі вонкавай геаметрыі. Іх канчатковыя кропкі абведзеныя ў трохмерным прадстаўленні. Аднак ніякіх абмежаванняў, якія звязаныя з канчатковымі кропкамі, выяўлена не было. @@ -4544,7 +4539,7 @@ However, no constraints linking to the endpoints were found. %1 changes were made to constraints linking to endpoints of reversed arcs. - Было зроблена %1 змен у абмежаванні, якія прывязаны да канчатковых кропках зваротных дуг. + Было зроблена %1 змен у абмежаванні, якія прывязаныя да канчатковых кропак зваротных дуг. @@ -4571,7 +4566,7 @@ However, no constraints linking to the endpoints were found. You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? - Вы збіраецеся выдаліць УСЕ абмежаванні, якія звязаныя з вонкавай геаметрыяй. Гэта карысна для аднаўлення эскіза з пашкоджанымі/змененымі спасылкамі на вонкавую геаметрыю. Вы сапраўды жадаеце выдаліць абмежаванні? + Вы збіраецеся выдаліць УСЕ абмежаванні, якія звязаныя з вонкавай геаметрыяй. Гэта карысна для аднаўлення эскіза з пашкоджанымі/змененымі сувязямі на вонкавую геаметрыю. Вы сапраўды жадаеце выдаліць абмежаванні? @@ -4624,7 +4619,7 @@ However, no constraints linking to the endpoints were found. Show/hide all listed constraints from 3D view. (same as ticking/unticking all listed constraints in list below) - Адлюстраваць/схаваць усе пералічаныя абмежаванні з трохмерным выглядам. (тое ж самае, што ставіць/здымаць птушкі з усіх пералічаных абмежаванняў у спісе ніжэй) + Паказаць/схаваць усе пералічаныя абмежаванні з трохмерным прадстаўленнем. (тое ж самае, што ставіць/здымаць птушкі з усіх пералічаных абмежаванняў у спісе ніжэй) @@ -4649,7 +4644,7 @@ However, no constraints linking to the endpoints were found. Show only filtered Constraints - Адлюстраваць толькі фільтраваныя абмежаванні + Паказаць толькі фільтраваныя абмежаванні @@ -4826,12 +4821,12 @@ However, no constraints linking to the endpoints were found. A grid will be shown - Будзе адлюстравана сетка + Будзе паказаная сетка Grid - Grid + Сетка @@ -4918,7 +4913,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Highlights open and non-manifold vertexes that could lead to error if sketch is used to generate solids This is purely based on topological shape of the sketch and not on its geometry/constrain set. - Вылучае адкрытыя і аднастайныя вяршыні, якія могуць прывесці да памылкі, калі эскіз ужываецца для стварэння цвёрдых цел. + Вылучае адкрытыя і аднастайныя вяршыні, якія могуць прывесці да памылкі, калі эскіз ужываецца для стварэння суцэльных цел. Гэта заснавана выключна на тапалагічнай форме эскіза, а не на яго геаметрыі/наборы абмежаванняў. @@ -4944,7 +4939,7 @@ This is purely based on topological shape of the sketch and not on its geometry/ Defines the X/Y tolerance inside which missing coincidences are searched. - Вызначае допуск X/Y, унутры якога выконваецца пошук супадзенняў, якія адсутнічаюць. + Вызначае дакладнасць X/Y, унутры якога выконваецца пошук супадзенняў, якія адсутнічаюць. @@ -4961,7 +4956,7 @@ This is purely based on topological shape of the sketch and not on its geometry/ Finds and displays missing coincidences in the sketch. This is done by analyzing the sketch geometries and constraints. Знайсці і адлюстраваць супадзенні ў эскізе, якія адсутнічаюць. -Гэта робіцца шляхам аналізу геаметрыі эскіза і абмежаванняў. +Гэта робіцца шляхам даследавання геаметрыі эскіза і абмежаванняў. @@ -4981,17 +4976,17 @@ This is done by analyzing the sketch geometries and constraints. Invalid constraints - Недапушчальны абмежаванні + Хібныя абмежаванні Finds invalid/malformed constrains in the sketch - Знайсці недапушчальныя/скажоныя абмежаванні ў эскізе + Знайсці хібныя/скажоныя абмежаванні ў эскізе Tries to fix found invalid constraints - Паспрабаваць выправіць выяўленыя недапушчальныя абмежаванні + Паспрабаваць выправіць выяўленыя хібныя абмежаванні @@ -5084,7 +5079,7 @@ This is done by analyzing the sketch geometries and constraints. Invalid sketch - Недапушчальны эскіз + Хібны эскіз @@ -5094,7 +5089,7 @@ This is done by analyzing the sketch geometries and constraints. The sketch is invalid and cannot be edited. - Эскіз несапраўдны і не можа быць зменены. + Эскіз хібны і не можа быць зменены. @@ -5193,7 +5188,7 @@ This is done by analyzing the sketch geometries and constraints. Switches between showing and hiding the curvature comb for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем грабянца крывізны для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем грабянца крывізны для ўсіх B-сплайнаў @@ -5211,7 +5206,7 @@ This is done by analyzing the sketch geometries and constraints. Switches between showing and hiding the degree for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем ступеняў для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем ступеняў для ўсіх B-сплайнаў @@ -5229,7 +5224,7 @@ This is done by analyzing the sketch geometries and constraints. Switches between showing and hiding the knot multiplicity for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем кратнасці вузлоў для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем кратнасці вузлоў для ўсіх B-сплайнаў @@ -5238,7 +5233,7 @@ This is done by analyzing the sketch geometries and constraints. Switches between showing and hiding the control point weight for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем вагі кантрольнай кропкі для ўсіх B-сплайнаў + Пераключэнне паміж адлюстраваннем і хаваннем вагі кантрольнай кропкі для ўсіх B-сплайнаўпаказваннем @@ -5247,7 +5242,7 @@ This is done by analyzing the sketch geometries and constraints. Switches between showing and hiding the control polygons for all B-splines - Пераключэнне паміж адлюстраваннем і хаваннем палігона кіравання для ўсіх B-сплайнаў + Пераключэнне паміж паказваннем і хаваннем палігона кіравання для ўсіх B-сплайнаў @@ -5594,7 +5589,7 @@ Select the method to attach this sketch to selected objects. Can't map a sketch to support: %1 - Немагчыма адлюстраваць эскіз для падтрымкі: + Немагчыма супаставіць эскіз для падтрымкі: %1 @@ -5931,7 +5926,7 @@ Eigen Sparse QR - аптымізаваны для разрэджаных мат None - None + Нічога diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm index 89997fcd05..a146e5495d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index 17fa15c8b6..44f6da218b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -421,7 +421,7 @@ Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses - Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses + Crea una restricció coincident entre punts o una restricció concèntrica entre cercles, arcs i el·lipses @@ -4926,7 +4926,7 @@ Això es basa exclusivament en la forma topològica de l'esbós i no en la seva Defines the X/Y tolerance inside which missing coincidences are searched. - Defineix la tolerància X/Y dins de la qual es cerquen les coincidències que falten. + Defineix la tolerància X/Y dins de la qual se cerquen les coincidències que falten. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index 1ecc541dcf..7b50e6f5af 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index 03de7c2016..86a7b449d4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -2545,7 +2545,7 @@ invalid constraints, degenerated geometry, etc. The selected edge is not a line segment. - The selected edge is not a line segment. + Выбранное ребро не является сегментом линии. @@ -2764,7 +2764,7 @@ invalid constraints, degenerated geometry, etc. This constraint only makes sense on a line segment or a pair of points. - This constraint only makes sense on a line segment or a pair of points. + Это ограничение имеет смысл только для сегмента линии или пары точек. @@ -2796,7 +2796,7 @@ invalid constraints, degenerated geometry, etc. The selected edge is not a valid line. - The selected edge is not a valid line. + Выделенное ребро некорректно. @@ -2961,7 +2961,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two or more compatible edges. - Select two or more compatible edges. + Выберите совместимые рёбра, два или более. @@ -2978,7 +2978,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two or more edges of similar type. - Select two or more edges of similar type. + Выберите рёбра аналогичного типа, два или более. @@ -3046,7 +3046,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You cannot internally constrain an ellipse on another ellipse. Select only one ellipse. - You cannot internally constrain an ellipse on another ellipse. Select only one ellipse. + Нельзя ограничить эллипс другим эллипсом. Выберите только один эллипс. @@ -3126,12 +3126,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c B-Spline Degree - B-Spline Degree + Степень B-сплайна Define B-Spline Degree, between 1 and %1: - Define B-Spline Degree, between 1 and %1: + Укажите степень B-сплайна, между 1 и %1: @@ -3178,7 +3178,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nothing is selected. Please select a b-spline. - Nothing is selected. Please select a b-spline. + Ничего не выбрано. Пожалуйста, выберите B-сплайн. @@ -3188,23 +3188,23 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nothing is selected. Please select end points of curves. - Nothing is selected. Please select end points of curves. + Ничего не выбрано. Пожалуйста, выберите конечные точки кривых. Too many curves on point - Too many curves on point + Слишком много кривых в точке Exactly two curve should end at the selected point to be able to join them. - Exactly two curve should end at the selected point to be able to join them. + Точно две кривые должны заканчиваться в выбранной точке, чтобы можно было их соединить. Too few curves on point - Too few curves on point + Слишком мало кривых в точке @@ -4354,12 +4354,12 @@ Defaults to: %N = %V Cursor coordinates will use the system decimals setting instead of the short form. - Cursor coordinates will use the system decimals setting instead of the short form. + Координаты курсора будут использовать системные настройки десятичных дробей вместо краткой формы. Use system decimals setting for cursor coordinates - Use system decimals setting for cursor coordinates + Использовать системные настройки десятичных дробей для координат курсора @@ -5962,12 +5962,12 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster P&rofiles - P&rofiles + P&rofiles S&ketch - S&ketch + S&ketch @@ -6005,12 +6005,12 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Creates a hexagonal profile - Creates a hexagonal profile + Создаёт шестиугольный профиль Creates a hexagonal profile in the sketch - Creates a hexagonal profile in the sketch + Создаёт шестиугольный профиль в эскизе diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.qm index 7e64987e86..34a7e98196 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.ts index da62d65184..8517455004 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_be.ts @@ -373,7 +373,7 @@ Clear cell(s) - Ачысціць клетку(і) + Ачысціць клеткі @@ -697,29 +697,29 @@ switch the design configuration. The property will be created if not exist. Show spreadsheet - Адлюстраваць аркуш + Паказаць аркуш Set cell(s) foreground color - Задаць колер зместу клеткі(ак) + Задаць колер зместу клетак Sets the Spreadsheet cell(s) foreground color - Задаць колер зместу клеткі(ак) аркуша + Задаць колер зместу клетак аркуша Set cell(s) background color - Задаць колер фону клеткі(ак) + Задаць колер фону клетак Sets the Spreadsheet cell(s) background color - Задаць колер фону клеткі(ак) аркуша + Задаць колер фону клетак аркуша @@ -929,7 +929,7 @@ Do you want to continue? Show alias in cell with format - Адлюстраваць псеўданім у клетцы з фарматам + Паказаць псеўданім у клетцы з фарматам diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm index 2ef6ad2634..a1561108f8 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts index 97b5534742..e7430217e3 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts @@ -191,12 +191,12 @@ Set alias - Установить псевдоним + Задать псевдоним Set alias for selected cell - Установить псевдоним для выбранной ячейки + Задать псевдоним для выбранной ячейки @@ -391,32 +391,32 @@ Bind Spreadsheet Cells - Bind Spreadsheet Cells + Привязка ячеек To cells: - To cells: + С ячейками: Sheet: - Sheet: + Лист: First cell in range - First cell in range + Первая ячейка диапазона Last cell in range - Last cell in range + Последняя ячейка диапазона Bind cells: - Bind cells: + Связать ячейки: @@ -426,49 +426,48 @@ End cell address - End cell address + Адрес последней ячейки Start cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - Start cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Адрес начальной ячейки, к которой осуществляется привязка. +Используйте '=', если хотите использовать выражение. +Формула должна возвращать строчный параметр с адресом ячейки. End cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - End cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Адрес последней ячейки, к которой осуществляется привязка. +Используйте '=', если хотите использовать выражение. +Формула должна возвращать строчный параметр с адресом ячейки. Which spread sheet to bind to - Which spread sheet to bind to + Таблица, к которой осуществляется привязка The dependency with the referenced spreadsheet will be hidden to the dependency checking. Useful to avoid cyclic dependencies, but use with caution! - The dependency with the referenced spreadsheet will -be hidden to the dependency checking. -Useful to avoid cyclic dependencies, but use with caution! + Скрывать зависимость на ссылаемую таблицу от проверки. +Полезно для избежания циклических зависимостей, но используйте осторожно! Hide dependency of binding - Hide dependency of binding + Скрывать зависимость привязки Unbind - Unbind + Отвязать @@ -486,12 +485,12 @@ Useful to avoid cyclic dependencies, but use with caution! Setup Configuration Table - Setup Configuration Table + Настроить таблицу конфигурации Cell range: - Cell range: + Диапазон ячеек: @@ -504,14 +503,13 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Starting cell address. + Адрес начальной ячейки. -The first column of the range is assumed to contain a list of configuration -names, which will be used to generate a string list and bind to the given -property for user to dynamically switch configuration. +Предполагается, что первый столбец диапазона содержит список имён конфигураций, который будет использоваться для генерации списка строк и привязки к заданному свойству +для динамического переключения конфигурации. -The first row of the range will be bound to whatever row (indirectly) selected -by that property. +Косвенно, первая строка диапазона будет привязана к любой строке, выбранной +этим параметром. @@ -525,42 +523,41 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Ending cell address. + Адрес конечной ячейки. -The first column of the range is assumed to contain a list of configuration -names, which will be used to generate a string list and bind to the given -property for user to dynamically switch configuration. +Предполагается, что первый столбец диапазона содержит список имён конфигураций, который будет использоваться для генерации списка строк и привязки к заданному свойству +для динамического переключения конфигурации. -The first row of the range will be bound to whatever row (indirectly) selected -by that property. +Косвенно, первая строка диапазона будет привязана к любой строке, выбранной +этим параметром. Property: - Property: + Свойство: Type in an expression to specify the object and property name to dynamically switch the design configuration. The property will be created if not exist. - Type in an expression to specify the object and property name to dynamically -switch the design configuration. The property will be created if not exist. + Введите выражение для указания объекта и свойства, чтобы динамически +переключать конфигурацию. Если свойство не существует, оно будет создано. Group: - Group: + Группа: Optional property group name. - Optional property group name. + Необязательное имя группы свойства. Unsetup - Unsetup + Удалить настройку @@ -659,12 +656,12 @@ switch the design configuration. The property will be created if not exist. &Display unit - &Показывать Единицы измерения + Отображаемые единицы измерения Unit string - Строка единицы измерения + Отображаемая единица измерения @@ -881,21 +878,21 @@ Spreadsheet.my_alias_name вместо Spreadsheet.B1 Bind cells - Bind cells + Связать ячейки Source and target cell count mismatch. Partial binding may still work. Do you want to continue? - Source and target cell count mismatch. Partial binding may still work. + Несоответствие количества исходных и целевых ячеек. Частичная привязка может сработать. -Do you want to continue? +Продолжить? Bind Spreadsheet Cells - Bind Spreadsheet Cells + Привязка ячеек @@ -906,7 +903,7 @@ Do you want to continue? Unbind cells - Unbind cells + Отвязать ячейки @@ -919,7 +916,7 @@ Do you want to continue? Display Settings - Настройки экрана + Настройки отображения @@ -947,42 +944,42 @@ Defaults to: %V = %A Import/Export Settings - Import/Export Settings + Настройки импортирования и экспортирования Delimiter Character: - Delimiter Character: + Символ разделителя: <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> - <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> + <html><body><p>Символ используется в качестве разделителя полей. По умолчанию это табуляция, но также обычно используются запятые (,) и точки с запятой (;). Выберите из списка или введите свой собственный символ. Должен быть один символ или слова <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, или <span style=" font-style:italic;">semicolon</span>.</p></body></html> tab - tab + tab Quote Character: - Quote Character: + Cимвол кавычек: <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> - <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> + <html><body><p>Символ, используемый для разделения строк, обычно это одинарная кавычка (') или двойная кавычка (&quot;). Должен быть одиночный символ.</p></body></html> Escape Character: - Escape Character: + Экранирование одиночного символа: <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> - <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> + <html><body><p>Символ экранирования (Escape character), обычно это обратная косая черта (\), используется для обозначения специальных непечатных символов, например, \t ― табуляция. Должен быть одиночным символом.</p></body></html> @@ -990,12 +987,12 @@ Defaults to: %V = %A Setup configuration table - Setup configuration table + Настроить таблицу конфигурации Unsetup configuration table - Unsetup configuration table + Удалить таблицу конфигурации @@ -1090,19 +1087,19 @@ Defaults to: %V = %A Recompute - Recompute + Пересчитать Bind... - Bind... + Связать... Configuration table... - Configuration table... + Таблица конфигурации... @@ -1164,7 +1161,7 @@ Defaults to: %V = %A &Spreadsheet - &Spreadsheet + &Spreadsheet @@ -1198,7 +1195,7 @@ Defaults to: %V = %A Apply the changes to the current cell - Apply the changes to the current cell + Применить изменения к текущей ячейке @@ -1208,7 +1205,7 @@ Defaults to: %V = %A Deletes the contents of the current cell - Deletes the contents of the current cell + Удаляет содержимое текущей ячейки @@ -1218,7 +1215,7 @@ Defaults to: %V = %A Updates the values handled by controllers - Updates the values handled by controllers + Обновляет значения, управляемые контроллерами @@ -1228,13 +1225,13 @@ Defaults to: %V = %A Add controller - Add controller + Добавить контроллер Add property controller - Add property controller + Добавить контроллер свойства @@ -1247,7 +1244,7 @@ Defaults to: %V = %A Adds a spreadsheet object to the active document - Adds a spreadsheet object to the active document + Добавляет электронную таблицу в активный документ @@ -1255,12 +1252,12 @@ Defaults to: %V = %A Add controller - Add controller + Добавить контроллер Adds a cell controller to a selected spreadsheet - Adds a cell controller to a selected spreadsheet + Добавляет контроллер ячеек в выбранную электронную таблицу @@ -1268,12 +1265,12 @@ Defaults to: %V = %A Add property controller - Add property controller + Добавить контроллер свойства Adds a property controller to a selected spreadsheet - Adds a property controller to a selected spreadsheet + Добавляет контроллер свойств в выбранную электронную таблицу diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_be.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_be.qm index b465121b60..a47bf9a58c 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_be.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_be.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_be.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_be.ts index 1d37415960..190833a831 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_be.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_be.ts @@ -36,7 +36,7 @@ Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list - Адрэгуляваць колькасць апошніх файлаў, якія будуць адлюстраваныя тут, у меню Праўка -> Перавагі -> Агульныя -> Памер спісу апошніх файлаў + Адрэгуляваць колькасць апошніх файлаў, якія будуць паказаныя тут, у меню Праўка -> Перавагі -> Агульныя -> Памер спісу апошніх файлаў @@ -270,17 +270,17 @@ Show examples folder contents - Адлюстраваць змест каталогу з прыкладамі + Паказаць змест каталогу з прыкладамі Show additional folder - Адлюстраваць дадатковы каталог + Паказаць дадатковы каталог If you want the examples to show on the first page - Калі вы жадаеце, каб прыклады былі адлюстраваныя на першай старонцы + Калі вы жадаеце, каб прыклады былі паказаныя на першай старонцы @@ -297,17 +297,17 @@ By using ";;" to separate paths, you can add several folders here Show notepad - Адлюстраваць нататнік + Паказаць нататнік Shows a notepad next to the file thumbnails, where you can keep notes across sessions - Адлюстроўвае нататнік побач з файламі мініяцюры, дзе вы можаце захоўваць нататкі паміж сеансамі + Паказвае нататнік побач з файламі мініяцюры, дзе вы можаце захоўваць нататкі паміж сеансамі Show tips - Адлюстраваць парады + Паказаць парады @@ -442,7 +442,7 @@ By using ";;" to separate paths, you can add several folders here The base font size to use for all texts of the Start page - Базавы памер шрыфту, які будзе ўжыты для ўсіх тэкстаў пачатковай старонкі + Асноўны памер шрыфту, які будзе ўжыты для ўсіх тэкстаў пачатковай старонкі @@ -457,7 +457,7 @@ By using ";;" to separate paths, you can add several folders here If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon - Калі птушка, на гузіку 'Новы файл' будзе адлюстраваны гузік градыенту замест звычайнага гузіка + Калі птушка, на гузіку 'Новы файл' будзе паказаны гузік градыенту замест звычайнага гузіка diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.qm index 7317f054b1..2497ff4e58 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts index 43383bb4b4..b13d3d3380 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts @@ -95,7 +95,7 @@ Insert Active View (3D View) - Уставіць бягучы выгляд (трохмерны выгляд) + Уставіць бягучы выгляд (трохмернае прадстаўленне) @@ -183,7 +183,7 @@ Insert Clip Group - Уставіць суполку зрэзаў + Уставіць суполку выглядаў @@ -196,7 +196,7 @@ Add View to Clip Group - Дадаць выгляд у суполку зрэзаў + Дадаць выгляд у суполку выглядаў @@ -209,7 +209,7 @@ Remove View from Clip Group - Выдаліць выгляд з суполкі зрэзаў + Выдаліць выгляд з суполкі выглядаў @@ -1379,12 +1379,12 @@ Add Cosmetic Intersection Vertex(es) - Дадаць касметычнае перакрыжаванне вяршыні(яў) + Дадаць касметычнае перакрыжаванне вяршынь Add cosmetic vertex(es) at the intersection(s) of selected edges:<br>- Select two edges (lines, circles and/or arcs)<br>- Click this tool - Дадайце касметычную вяршыню(і) на перакрыжаванні абраных рэбраў:<br>- Абярыце два рабра (лініі, акружнасці і/ці дугі)<br>- Пстрыкніце гэты інструмент + Дадайце касметычныя вяршыні на перакрыжаванні абраных рэбраў:<br>- Абярыце два рабра (лініі, акружнасці і/ці дугі)<br>- Пстрыкніце гэты інструмент @@ -1646,7 +1646,7 @@ Insert multiple linked views of drawable object(s) - Уставіць некалькі звязаных відаў аб'екта(аў) чарцяжа + Уставіць некалькі звязаных выглядаў аб'ектаў чарцяжа @@ -1747,7 +1747,7 @@ Show/Hide Invisible Edges - Адлюстраваць/схаваць нябачныя рэбры + Паказаць/схаваць нябачныя рэбры @@ -1900,7 +1900,7 @@ Turn View Frames On/Off - Адлюстраваць/схаваць элементы для змены чарцяжа + Уключыць/адключыць рамку для змены чарцяжа @@ -2289,7 +2289,7 @@ Cosmetic Intersection Vertex(es) - Касметычнае перакрыжаванне вяршыні(яў) + Касметычнае перакрыжаванне вяршынь @@ -2352,7 +2352,7 @@ The view direction angle relative to +X in the BaseView. - Вугал напрамку выгляд адносна + X на базавым выглядзе. + Вугал напрамку выгляд адносна + X на асноўным выглядзе. @@ -2476,42 +2476,42 @@ Bullet list (CTRL+-) - Bullet list (CTRL+-) + Маркіраваны спіс (<Ctrl + ->) Ordered list (CTRL+=) - Ordered list (CTRL+=) + Упарадкаваны спіс (<Ctrl + =>) Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Паменшыць водступ (<Ctrl + ,>) Decrease indentation - Decrease indentation + Паменшыць водступ Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Павялічыць водступ (<Ctrl + .>) Increase indentation - Increase indentation + Павялічыць водступ Text foreground color - Text foreground color + Колер тэксту Text background color - Text background color + Колер фону тэкста @@ -2527,7 +2527,7 @@ More functions - More functions + Больш функцый @@ -2537,67 +2537,67 @@ Heading 1 - Heading 1 + Загаловак 1 Heading 2 - Heading 2 + Загаловак 2 Heading 3 - Heading 3 + Загаловак 3 Heading 4 - Heading 4 + Загаловак 4 Monospace - Monospace + Аднолькавай шырыні Remove character formatting - Remove character formatting + Прыбраць фарматаванне знаку Remove all formatting - Remove all formatting + Прыбраць усё фарматаванне Edit document source - Edit document source + Змяніць крыніцу дакумента Document source - Document source + Крыніца дакументу Create a link - Create a link + Стварыць сувязь Link URL: - Link URL: + URL-адрас спасылкі: Select an image - Select an image + Абраць выяву JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) - JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Усе (*) @@ -2637,28 +2637,28 @@ No Shapes, Groups or Links in this selection - No Shapes, Groups or Links in this selection + Без фігур, суполак і сувязяў у абраным Select at least 1 DrawViewPart object as Base. - Select at least 1 DrawViewPart object as Base. + Абярыце хаця б адзін аб'ект выгляду дэталі як асноўны. I do not know what base view to use. - I do not know what base view to use. + Я не ведаю, які асноўны выгляд патрэбна ўжываць. No Base View, Shapes, Groups or Links in this selection - No Base View, Shapes, Groups or Links in this selection + Без асноўнага выгляду, суполак і сувязяў у абраным No profile object found in selection - No profile object found in selection + Аб'ект профілю не знойдзены ў абраным @@ -2680,19 +2680,19 @@ Incorrect selection - Incorrect selection + Няправільны выбар Select an object first - Select an object first + Спачатку абярыце аб'ект Too many objects selected - Too many objects selected + Абрана зашмат аб'ектаў @@ -2711,37 +2711,37 @@ No View of a Part in selection. - No View of a Part in selection. + Без выгляду дэталі ў абраным. Select one Clip group and one View. - Select one Clip group and one View. + Абярыце адну суполку выглядаў і адзін выгляд. Select exactly one View to add to group. - Select exactly one View to add to group. + Абярыце толькі адзін выгляд, каб дадаць яго ў суполку. Select exactly one Clip group. - Select exactly one Clip group. + Абярыце роўна адну суполку выглядаў. Clip and View must be from same Page. - Clip and View must be from same Page. + Зрэз і выгляд павінны быць на адной старонцы. Select exactly one View to remove from Group. - Select exactly one View to remove from Group. + Абярыце толькі адзін выгляд, каб выдаліць яго з суполкі. View does not belong to a Clip - View does not belong to a Clip + Выгляд не належыць да зрэзу @@ -2761,17 +2761,17 @@ Select at least one object. - Select at least one object. + Абярыце хаця б адзін аб'ект. Please select only 1 Arch Section. - Please select only 1 Arch Section. + Калі ласка, абярыце толькі адзін перасек Архітэктуры. No Arch Sections in selection. - No Arch Sections in selection. + Без перасек Архітэктуры ў абраным. @@ -2781,44 +2781,44 @@ No Drawing View - No Drawing View + Без выгляду чарцяжоў Open Drawing View before attempting export to SVG. - Open Drawing View before attempting export to SVG. + Адчыніце выгляд чарцяжа перад экспартаваннем у SVG. Can not export selection - Can not export selection + Не атрымалася экспартаваць абранае Page contains DrawViewArch which will not be exported. Continue? - Page contains DrawViewArch which will not be exported. Continue? + Старонка ўтрымлівае DrawViewArch, які не будзе экспартаваны. Ці працягнуць? Ellipse Curve Warning - Ellipse Curve Warning + Папярэджанне крывой эліпса Selected edge is an Ellipse. Radius will be approximate. Continue? - Selected edge is an Ellipse. Radius will be approximate. Continue? + Абранае рабро ўяўляе сабой эліпс. Радыус будзе прыблізным. Ці працягнуць? BSpline Curve Warning - BSpline Curve Warning + Папярэджанне крывой B-сплайна Selected edge is a BSpline. Radius will be approximate. Continue? - Selected edge is a BSpline. Radius will be approximate. Continue? + Абранае рабро ўяўляе сабой B-сплайн. Радыус будзе прыблізным. Ці працягнуць? @@ -2847,17 +2847,17 @@ Incorrect Selection - Incorrect Selection + Няправільны выбар Can not make 2d radius dimension from selection - Can not make 2d radius dimension from selection + Не атрымалася стварыць двухмернае вымярэнне радыусу з абранага Can not make 3d radius dimension from selection - Can not make 3d radius dimension from selection + Не атрымалася стварыць трохмернае вымярэнне радыусу з абранага @@ -2878,7 +2878,7 @@ Can not make 3d diameter dimension from selection - Can not make 3d diameter dimension from selection + Не атрымалася стварыць трохмернае вымярэнне дыяметру з абранага @@ -2903,7 +2903,7 @@ Can not make 3d linear dimension from selection - Can not make 3d linear dimension from selection + Не атрымалася стварыць трохмернае лінейнае вымярэнне з абранага @@ -2913,7 +2913,7 @@ Can not make 3d horizontal dimension from selection - Can not make 3d horizontal dimension from selection + Не атрымалася стварыць трохмернае гарызантальнае вымярэнне з абранага @@ -2923,7 +2923,7 @@ Can not make 3d vertical dimension from selection - Can not make 3d vertical dimension from selection + Не атрымалася стварыць трохмернае вертыкальнае вымярэнне з абранага @@ -2935,7 +2935,7 @@ Can not make 3d angle dimension from selection - Can not make 3d angle dimension from selection + Не атрымалася стварыць трохмернае вымярэнне вугла з абранага @@ -2945,7 +2945,7 @@ Can not make 3d extent dimension from selection - Can not make 3d extent dimension from selection + Не атрымалася стварыць трохмернае габарытнае вымярэнне з абранага @@ -2955,12 +2955,12 @@ There is no 3D object in your selection - There is no 3D object in your selection + У вашым выбары няма трохмернага аб'екта There are no 3D Edges or Vertices in your selection - There are no 3D Edges or Vertices in your selection + У вашым выбары няма трохмерных рэбраў ці вяршынь @@ -3324,12 +3324,12 @@ Show drawing - Адлюстраваць чарцёж + Паказаць чарцёж Toggle KeepUpdated - Toggle KeepUpdated + Пераключыць абнаўленне @@ -3386,12 +3386,12 @@ No 3D Viewer - No 3D Viewer + Без трохмернага прадстаўлення Can not find a 3D viewer - Can not find a 3D viewer + Не атрымалася знайсці сродак трохмернага прадстаўлення @@ -3760,7 +3760,7 @@ it has a tile weld that would become broken. Use 3d Background - Use 3d Background + Ужыць трохмерны фон @@ -4189,7 +4189,7 @@ when hatching a face with a PAT pattern Annotation - Annotation + Заметка @@ -4362,7 +4362,7 @@ when hatching a face with a PAT pattern None - None + Нічога @@ -4855,19 +4855,19 @@ Multiplier of 'Font Size' Whether or not pages are updated every time the 3D model is changed - Whether or not pages are updated every time the 3D model is changed + Незалежна ад таго, абнаўляюцца старонкі пры кожнай змене трохмернай мадэлі, ці не Update With 3D (global policy) - Update With 3D (global policy) + Абнаўленне з дапамогай трохмернага прадстаўлення (глабальнае правіла) Whether or not a page's 'Keep Updated' property can override the global 'Update With 3D' parameter - Whether or not a page's 'Keep Updated' property -can override the global 'Update With 3D' parameter + Незалежна ад таго, ці можа ўласцівасць старонкі 'Абнаўленне' +перавызначаць глабальную наладу 'Абнаўленне з дапамогай трохмернага прадстаўлення', ці не @@ -4878,8 +4878,8 @@ can override the global 'Update With 3D' parameter Keep drawing pages in sync with changes of 3D model in real time. This can slow down the response time. - Keep drawing pages in sync with changes of 3D model in real time. -This can slow down the response time. + Сінхранізуе старонку малявання чарцяжа з зменамі трохмернай мадэлі ў рэжыме рэальнага часу. +Гэта можа запаволіць час адказу. @@ -5013,7 +5013,7 @@ for ProjectionGroups Default SVG or bitmap file for hatching - Default SVG or bitmap file for hatching + Першапачатковы SVG ці растравы файл для штрыхоўкі @@ -5063,7 +5063,7 @@ for ProjectionGroups Grid - Grid + Сетка @@ -5144,7 +5144,7 @@ Fast, but result is a collection of short straight lines. Show smooth lines - Адлюстраваць плыўныя лініі + Паказаць плыўныя лініі @@ -5314,12 +5314,12 @@ Fast, but result is a collection of short straight lines. Toggle &Keep Updated - Toggle &Keep Updated + Пераключыць &абнаўленне Toggle &Frames - Toggle &Frames + Пераключыць &рамку @@ -5469,7 +5469,7 @@ Do you want to continue? None - None + Нічога @@ -5958,7 +5958,7 @@ Do you want to continue? 3d Point - 3d Point + Трохмерная кропка @@ -6753,7 +6753,7 @@ be used instead of the dimension value Select an Svg or Bitmap file - Select an Svg or Bitmap file + Абраць SVG ці растравы файл @@ -6763,7 +6763,7 @@ be used instead of the dimension value Choose an Svg or Bitmap file as a pattern - Choose an Svg or Bitmap file as a pattern + Абярыце SVG ці растравы файла ў якасці шаблону @@ -7052,12 +7052,12 @@ You can pick further points to get line segments. Link Dimension - Link Dimension + Звязаць вымярэнне Link This 3D Geometry - Link This 3D Geometry + Звязаць гэтае з трохмернай геаметрыяй @@ -7605,7 +7605,7 @@ using the given X/Y Spacing Position from the 3D origin of the object in the view - Position from the 3D origin of the object in the view + Становішча ад пачатку трохмерных каардынат аб'екта ў выглядзе @@ -8231,7 +8231,7 @@ using the given X/Y Spacing References 3D - References 3D + Спасылкі на трохмернае прадстаўленне diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm index ae989585fe..0ce3bf2254 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 33e4e32cf9..4fa3edd6f3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -121,7 +121,7 @@ Insert Annotation - Insereix Anotació + Insereix una anotació @@ -222,12 +222,12 @@ Insert Complex Section - Insert Complex Section + Insereix una secció complexa Insert a Complex Section - Insert a Complex Section + Insereix una secció complexa @@ -364,12 +364,12 @@ Save DXF file - Save DXF file + Desa el fitxer DXF DXF (*.dxf) - DXF (*.dxf) + DXF (*.dxf) @@ -413,7 +413,7 @@ Calculate the area of selected faces - Calculate the area of selected faces + Calcula l'àrea de les cares seleccionades @@ -527,7 +527,7 @@ Change Line Attributes - Change Line Attributes + Canvia els atributs de la línia @@ -2284,7 +2284,7 @@ Change Line Attributes - Change Line Attributes + Canvia els atributs de la línia @@ -5366,12 +5366,12 @@ Do you want to continue? Save DXF file - Save DXF file + Desa el fitxer DXF DXF (*.dxf) - DXF (*.dxf) + DXF (*.dxf) @@ -7848,7 +7848,7 @@ usant l'espaiat X/Y donat TextLabel - Etiqueta de Text + Etiqueta de text diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm index cc93bc9120..6196fb8aef 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 42b5f7feaf..aff60f2719 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -1628,7 +1628,7 @@ Project shape... - Fläche projizieren... + Form projizieren... @@ -4077,7 +4077,7 @@ Schraffieren zu können; dies kann aber zu Performance-Einbußen bei komplexen M Include 2D Objects in projection - 2D-Objekte in die Projektion einbeziehen + 2D-Objekte beim Projizieren berücksichtigen @@ -4431,7 +4431,7 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Show arc center marks in views - Zeige die Bogenmittenmarkierungen in den Ansichten an + Zeigt die Bogenmittenmarkierungen in den Ansichten an @@ -4441,7 +4441,7 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Show arc centers in printed output - Zeige die Bogenmittenmarkierungen in Ausdrucken an + Zeigt die Bogenmittenmarkierungen in Ausdrucken an @@ -4884,7 +4884,7 @@ Dies kann die Reaktionszeit verlangsamen. Automatically distribute secondary views for ProjectionGroups - Automatisch zweitrangige Ansichten + Automatisch sekundäre Ansichten für Ansichtengruppen verteilen @@ -7182,7 +7182,7 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. Secondary Projections - Sekundäre Projektionen + Sekundäre Ansichten @@ -7282,7 +7282,7 @@ mit dem vorgegebenen X/Y-Abstand Project shapes - Flächen projizieren + Formen projizieren @@ -8269,7 +8269,7 @@ mit dem vorgegebenen X/Y-Abstand Axonometric length dimension - Axonometric length dimension + Axonometrisches Längenmaß @@ -8278,11 +8278,11 @@ mit dem vorgegebenen X/Y-Abstand - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Erstellt ein axonometrisches Längenmaß<br> + - Die erste Kante auswählen, um Ausrichtung und Länge der Maßlinie festzulegen<br> + - Die zweite Kante auswählen, um die Ausrichtung der Maßhilfslinien festzulegen<br> + - optional: Zwei weitere Knoten auswählen, die das Maß festlegen, anstelle der Länge<br> + der zuerst ausgewählten Kante diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm index 3ac2e436b8..dc899a9531 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts index c63864a8d1..f9c23f58ef 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts @@ -8281,7 +8281,7 @@ usando el espacio X/Y dado Axonometric length dimension - Axonometric length dimension + Cota de longitud axonométrica @@ -8290,11 +8290,11 @@ usando el espacio X/Y dado - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Crea una cota de longitud axonométrica<br> + - seleccione el primer borde para definir la dirección y la longitud de la línea de cota<br> + - seleccione el segundo borde para definir la dirección de las líneas de extensión<br> + - opcional: seleccione dos vértices más que definan la medida en lugar de la longitud<br> + del primer borde seleccionado diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm index 68f13bd8f0..4e0ce113d8 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index 1340e998d6..16e9df6d5d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -8281,7 +8281,7 @@ usando el Espaciado X/Y dado Axonometric length dimension - Axonometric length dimension + Dimensión de longitud axonométrica diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm index b23be0fc4c..ca498b9d70 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 997acfd932..b5bd99632d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -8275,7 +8275,7 @@ en utilisant l'espacement X/Y donné Axonometric length dimension - Axonometric length dimension + Cote de longueur axonométrique @@ -8284,11 +8284,11 @@ en utilisant l'espacement X/Y donné - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Créer une cote de longueur axonométrique<br> + - sélectionner la première arête pour définir la direction et la longueur de la ligne de la cote<br> + - sélectionner la deuxième arête pour définir la direction des lignes d'extension<br> + - optionnel : sélectionner deux sommets supplémentaires qui définissent la mesure au lieu de la longueur<br> + de la première arête sélectionnée diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm index d10a7be642..198459efd9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index 1105d952ae..af1a33bce6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -8282,7 +8282,7 @@ using the given X/Y Spacing Axonometric length dimension - Axonometric length dimension + Axonometrikus hosszméret @@ -8291,11 +8291,11 @@ using the given X/Y Spacing - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Hozzon létre egy axonometrikus hosszméretet<br> + - válassza ki az első élt a méretvonal irányának és hosszának meghatározásához<br> + - válassza ki a második élt a segédvonal irányának meghatározásához<br> + - választható: két csúcspont kiválasztása a hossz helyett a méret meghatározásához<br> + az első kiválasztott élhez diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm index e46e5ae36c..0be9a74445 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts index 97da7821ad..7c80523b6c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts @@ -8282,7 +8282,7 @@ using the given X/Y Spacing Axonometric length dimension - Axonometric length dimension + აქსონომეტრიული სიგრძის ზომა @@ -8291,11 +8291,11 @@ using the given X/Y Spacing - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + აქსონომეტრიული სიგრის ზომის შექმნა<br> + - აირჩიეთ პირველი წიბო, რათა ზომის ხაზის მიმართულება და სიგრძე აღწეროთ<br> + - აირჩიეთ მეორე წიბო, რათა გაფართოების ხაზების მიმართულება განსაზღვროთ<br> + - არასავალდებულო: აირჩიეთ ერთი ან მეტი წვერო, რომელიც <br> + პირველი მონიშნული წიბოს სიგრძის მაგიერ გაზოვას აღწერს diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm index b76ecbe971..7219d09a55 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index 238cbac556..2e5004acbd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -8283,7 +8283,7 @@ przy użyciu podanego odstępu X/Y Axonometric length dimension - Axonometric length dimension + Wymiar długości aksonometrycznej @@ -8292,11 +8292,11 @@ przy użyciu podanego odstępu X/Y - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Utwórz wymiar długości aksonometrycznej<br> + - wybierz pierwszą krawędź, aby zdefiniować kierunek i długość linii wymiaru<br> + - wybierz drugą krawędź, aby zdefiniować kierunek linii pomocniczej<br> + - opcjonalnie: wybierz dwa wierzchołki definiujące rozpiętość zamiast długości<br> + pierwszej wybranej krawędzi diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm index 13e9fef458..d137d687bc 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index b648a3d10a..122a38c9f6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -8279,7 +8279,7 @@ using the given X/Y Spacing Axonometric length dimension - Axonometric length dimension + Измерение длин в аксонометрической проекции @@ -8288,11 +8288,11 @@ using the given X/Y Spacing - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Создать аксонометрический размер<br> + - выберите первое ребро для определения направления и длины размерной линии<br> + - выберите второе ребро для определения направления продления линии<br> + - опционально: выберите две вершины, которые станут размерной базой вместо<br> + первого выделенного ребра diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm index 6e15ce0eeb..8dff0051e5 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index 521fed9aeb..ddd48d0dfc 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -3609,12 +3609,12 @@ Average roughness - Average roughness + Povprečna hrapavost Roughness sampling length - Roughness sampling length + Dolžina vzorčenja hrapavosti @@ -3624,12 +3624,12 @@ Minimum roughness grade number - Minimum roughness grade number + Najmanjša vrednost hrapavosti Maximum roughness grade number - Maximum roughness grade number + Najvišja vrednost hrapavosti @@ -8282,7 +8282,7 @@ s pomočjo podanih X/Y odmikov Axonometric length dimension - Axonometric length dimension + Kote aksonometrične dolžine @@ -8291,11 +8291,10 @@ s pomočjo podanih X/Y odmikov - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Ustvari koto aksonometrične dolžine<br> + - izberite prvi rob, ki določa smer in dolžino kotnice<br> + - izberite drugi rob, ki določa smer pomožnih kotirnih črt<br> + - neobvezno: izberete lahko še dve oglišči, ki določata meritev namesto dolžine prvega roba<br> diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.qm index 73cb66f4d6..2be821e836 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts index 3ad59a642c..875b125ec5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts @@ -8281,7 +8281,7 @@ using the given X/Y Spacing Axonometric length dimension - Axonometric length dimension + Aksonometrijska dužinska kota @@ -8290,11 +8290,11 @@ using the given X/Y Spacing - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Napravi aksonometrijsku dužinsku kotu<br> + - izaberi prvu ivicu da bi definisao pravac i dužinu kotne linije<br> + - izaberi drugu ivicu da bi definisao pravac pomoćnih kotnih linija<br> + - neobavezno: izaberi još dva temena koji će definisati merenje prve izabrane ivice<br> +umesto dužine diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm index 4e956c655e..cc7bd5bf29 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 70975e941c..6df42cea2d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -8281,7 +8281,7 @@ using the given X/Y Spacing Axonometric length dimension - Axonometric length dimension + Аксонометријска дужинска кота @@ -8290,11 +8290,11 @@ using the given X/Y Spacing - select second edge to define the direction of the extension lines<br> - optional: select two more vertexes which define the measurement instead of the length<br> of the first selected edge - Create an axonometric length dimension<br> - - select first edge to define direction and length of the dimension line<br> - - select second edge to define the direction of the extension lines<br> - - optional: select two more vertexes which define the measurement instead of the length<br> - of the first selected edge + Направи аксонометријску дужинску коту<br> + - изабери прву ивицу да би дефинисао правац и дужину котне линије<br> + - изабери другу ивицу да би дефинисао правац помоћних котних линија<br> + - необавезно: изабери још два темена који ће дефинисати мерење прве изабране ивице<br> +уместо дужине diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ca.qm b/src/Mod/Test/Gui/Resources/translations/Test_ca.qm index 265990f49c..6ade1d67b1 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ca.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ca.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ca.ts b/src/Mod/Test/Gui/Resources/translations/Test_ca.ts index fec477b650..d6d2b725aa 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test_ca.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test_ca.ts @@ -113,7 +113,7 @@ Click 'start', and the test thus produced will be run. Double click on an error in the tree view to see more information about it, including the stack trace. Introduïu el nom d'un objecte cridable que quan es cridi retorni un TestCase. -Feu clic a 'Començar' i s'executarà el test anteriorment produït. +Feu clic a 'Comença' i s'executarà el test anteriorment produït. Feu doble clic a un error a la vista d'arbre per veure'n més informació, incloent-hi la traça de pila. diff --git a/src/Mod/Tux/Resources/translations/Tux_it.qm b/src/Mod/Tux/Resources/translations/Tux_it.qm index dd75783b7e..63a5f4fe90 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_it.qm and b/src/Mod/Tux/Resources/translations/Tux_it.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_it.ts b/src/Mod/Tux/Resources/translations/Tux_it.ts index 5b1621b370..030f91531c 100644 --- a/src/Mod/Tux/Resources/translations/Tux_it.ts +++ b/src/Mod/Tux/Resources/translations/Tux_it.ts @@ -86,7 +86,7 @@ Free Turntable - Giradischi Libero + Piatto Libero diff --git a/src/Mod/Web/Gui/Resources/translations/Web_be.qm b/src/Mod/Web/Gui/Resources/translations/Web_be.qm index 2b5736a83e..99d2c992a4 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_be.qm and b/src/Mod/Web/Gui/Resources/translations/Web_be.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_be.ts b/src/Mod/Web/Gui/Resources/translations/Web_be.ts index 1a624f6558..5e1bde2125 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_be.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_be.ts @@ -48,7 +48,7 @@ Refresh web page - Абнавіць старонку + Абнавіць інтэрнэт-старонку @@ -117,12 +117,12 @@ Open website... - Адчыніць вэб-сайт... + Адчыніць інтэрнэт-сайт... Opens a website in FreeCAD - Адчыняе вэб-сайт у FreeCAD + Адчыняе інтэрнэт-сайт у FreeCAD diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ca.qm b/src/Mod/Web/Gui/Resources/translations/Web_ca.qm index 6eeb034fb7..1810ed5aaa 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ca.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ca.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts index 68fe784cac..e1ba086f81 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts @@ -16,7 +16,7 @@ Go back to the previous page - Tornar a la pàgina anterior + Torna a la pàgina anterior @@ -34,7 +34,7 @@ Go to the next page - Anar a la pàgina següent + Ves a la pàgina següent @@ -48,7 +48,7 @@ Refresh web page - Actualitzar la pàgina web + Actualitza la pàgina web @@ -90,7 +90,7 @@ Zoom in - Ampliar + Apropa @@ -117,12 +117,12 @@ Open website... - Obrir web... + Obre el lloc web... Opens a website in FreeCAD - Obra una pàgina web a FreeCAD + Obre una pàgina web al FreeCAD @@ -151,12 +151,12 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - Hi hagué errors quan es carregava el fitxer. Algunes dades s'han pogut modificar o no s'han recuperat. Cerqueu a la vista d'informes per a obtindre informació més específica sobre els objectes implicats. + S'han produït errors en carregar el fitxer. Algunes dades es poden haver modificades o no s'han recuperat. Consulteu la vista d'informe per a obtenir informació més específica sobre els objectes implicats. There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - Hi ha hagut greus errors en carregar l'arxiu. Pot ser que s'hagin modificat dades o no s'hagin recuperat. Guardar el projecte molt probablement resulti en pèrdua de dades. + Hi ha hagut errors greus en carregar el fitxer. Pot ser que s'hagin modificat dades o no s'hagin recuperat. Desar el projecte probablement provocarà la pèrdua de dades. @@ -169,12 +169,12 @@ Open in External Browser - Obrir en un Navegador Extern + Obre en un navegador extern Open in new window - Obrir en una finestra nova + Obre en una finestra nova