diff --git a/src/Mod/Fem/femexamples/boxanalysis_static.py b/src/Mod/Fem/femexamples/boxanalysis_static.py
index 40a28deb9d..894b6a9a39 100644
--- a/src/Mod/Fem/femexamples/boxanalysis_static.py
+++ b/src/Mod/Fem/femexamples/boxanalysis_static.py
@@ -128,6 +128,11 @@ def setup(doc=None, solvertype="ccxtools"):
         ObjectsFem.makeEquationElasticity(doc, solver_object)
     elif solvertype == "z88":
         analysis.addObject(ObjectsFem.makeSolverZ88(doc, "SolverZ88"))
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.SplitInputWriter = False
         solver_object.AnalysisType = "static"
diff --git a/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py b/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
index 280763fc67..520cac7880 100644
--- a/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
@@ -92,6 +92,11 @@ def setup_cantileverbase(doc=None, solvertype="ccxtools"):
         ObjectsFem.makeEquationElasticity(doc, solver_object)
     elif solvertype == "z88":
         analysis.addObject(ObjectsFem.makeSolverZ88(doc, "SolverZ88"))
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.SplitInputWriter = False
         solver_object.AnalysisType = "static"
diff --git a/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py b/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py
index b71bda82a1..7fa7b2dcd2 100644
--- a/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py
+++ b/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py
@@ -138,6 +138,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver_object.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.AnalysisType = "static"
         solver_object.BeamShellResultOutput3D = True
diff --git a/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py b/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py
index 7ab1a5e591..4afcbc541c 100644
--- a/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py
+++ b/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py
@@ -119,6 +119,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver_object.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.AnalysisType = "static"
         solver_object.GeometricalNonlinearity = "linear"
diff --git a/src/Mod/Fem/femexamples/constraint_section_print.py b/src/Mod/Fem/femexamples/constraint_section_print.py
index 3c9cdc09c4..5f8175f223 100644
--- a/src/Mod/Fem/femexamples/constraint_section_print.py
+++ b/src/Mod/Fem/femexamples/constraint_section_print.py
@@ -224,10 +224,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver_object.WorkingDir = u""
-    elif solvertype == "elmer":
-        analysis.addObject(ObjectsFem.makeSolverElmer(doc, "SolverElmer"))
-    elif solvertype == "z88":
-        analysis.addObject(ObjectsFem.makeSolverZ88(doc, "SolverZ88"))
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.SplitInputWriter = False
         solver_object.AnalysisType = "static"
diff --git a/src/Mod/Fem/femexamples/constraint_tie.py b/src/Mod/Fem/femexamples/constraint_tie.py
index 5d3efa22ef..724da4eea4 100644
--- a/src/Mod/Fem/femexamples/constraint_tie.py
+++ b/src/Mod/Fem/femexamples/constraint_tie.py
@@ -109,6 +109,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver_object.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.AnalysisType = "static"
         solver_object.GeometricalNonlinearity = "linear"
diff --git a/src/Mod/Fem/femexamples/material_multiple_twoboxes.py b/src/Mod/Fem/femexamples/material_multiple_twoboxes.py
index 1b16e99861..719f2df495 100644
--- a/src/Mod/Fem/femexamples/material_multiple_twoboxes.py
+++ b/src/Mod/Fem/femexamples/material_multiple_twoboxes.py
@@ -108,6 +108,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver_object.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.SplitInputWriter = False
         solver_object.AnalysisType = "static"
diff --git a/src/Mod/Fem/femexamples/material_nl_platewithhole.py b/src/Mod/Fem/femexamples/material_nl_platewithhole.py
index a72a318fe2..ef9919400c 100644
--- a/src/Mod/Fem/femexamples/material_nl_platewithhole.py
+++ b/src/Mod/Fem/femexamples/material_nl_platewithhole.py
@@ -113,6 +113,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver.SplitInputWriter = False
         solver.AnalysisType = "static"
diff --git a/src/Mod/Fem/femexamples/rc_wall_2d.py b/src/Mod/Fem/femexamples/rc_wall_2d.py
index 4dae360280..99aa19396a 100644
--- a/src/Mod/Fem/femexamples/rc_wall_2d.py
+++ b/src/Mod/Fem/femexamples/rc_wall_2d.py
@@ -106,6 +106,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver.SplitInputWriter = False
         solver.AnalysisType = "static"
diff --git a/src/Mod/Fem/femexamples/thermomech_bimetall.py b/src/Mod/Fem/femexamples/thermomech_bimetall.py
index 62a0558819..87213ad285 100644
--- a/src/Mod/Fem/femexamples/thermomech_bimetall.py
+++ b/src/Mod/Fem/femexamples/thermomech_bimetall.py
@@ -113,6 +113,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
         )[0]
         solver_object.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.AnalysisType = "thermomech"
         solver_object.GeometricalNonlinearity = "linear"
diff --git a/src/Mod/Fem/femexamples/thermomech_flow1d.py b/src/Mod/Fem/femexamples/thermomech_flow1d.py
index 6390e56a7b..c7e42f9615 100644
--- a/src/Mod/Fem/femexamples/thermomech_flow1d.py
+++ b/src/Mod/Fem/femexamples/thermomech_flow1d.py
@@ -124,6 +124,11 @@ def setup(doc=None, solvertype="ccxtools"):
             ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")  # CalculiX
         )[0]
         solver_object.WorkingDir = u""
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.SplitInputWriter = False
         solver_object.AnalysisType = "thermomech"
diff --git a/src/Mod/Fem/femexamples/thermomech_spine.py b/src/Mod/Fem/femexamples/thermomech_spine.py
index 5c2d6f88ca..3f717d89d3 100644
--- a/src/Mod/Fem/femexamples/thermomech_spine.py
+++ b/src/Mod/Fem/femexamples/thermomech_spine.py
@@ -88,6 +88,11 @@ def setup(doc=None, solvertype="ccxtools"):
     # should be possible with elmer too
     # elif solvertype == "elmer":
     #     analysis.addObject(ObjectsFem.makeSolverElmer(doc, "SolverElmer"))
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
     if solvertype == "calculix" or solvertype == "ccxtools":
         solver_object.SplitInputWriter = False
         solver_object.AnalysisType = "thermomech"